| 1 |
/* |
| 2 |
* Copyright (c) 2018 MediaTek Inc. |
| 3 |
* Author: Ryder Lee <[email protected]> |
| 4 |
* |
| 5 |
* SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/leds/common.h> |
| 12 |
|
| 13 |
#include "mt7622.dtsi" |
| 14 |
#include "mt6380.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Bananapi BPI-R64"; |
| 18 |
chassis-type = "embedded"; |
| 19 |
compatible = "bananapi,bpi-r64", "mediatek,mt7622"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
serial0 = &uart0; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
stdout-path = "serial0:115200n8"; |
| 27 |
bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512"; |
| 28 |
}; |
| 29 |
|
| 30 |
cpus { |
| 31 |
cpu@0 { |
| 32 |
proc-supply = <&mt6380_vcpu_reg>; |
| 33 |
sram-supply = <&mt6380_vm_reg>; |
| 34 |
}; |
| 35 |
|
| 36 |
cpu@1 { |
| 37 |
proc-supply = <&mt6380_vcpu_reg>; |
| 38 |
sram-supply = <&mt6380_vm_reg>; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
gpio-keys { |
| 43 |
compatible = "gpio-keys"; |
| 44 |
|
| 45 |
factory-key { |
| 46 |
label = "factory"; |
| 47 |
linux,code = <BTN_0>; |
| 48 |
gpios = <&pio 0 GPIO_ACTIVE_HIGH>; |
| 49 |
}; |
| 50 |
|
| 51 |
wps-key { |
| 52 |
label = "wps"; |
| 53 |
linux,code = <KEY_WPS_BUTTON>; |
| 54 |
gpios = <&pio 102 GPIO_ACTIVE_LOW>; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
leds { |
| 59 |
compatible = "gpio-leds"; |
| 60 |
|
| 61 |
led-0 { |
| 62 |
label = "bpi-r64:pio:green"; |
| 63 |
color = <LED_COLOR_ID_GREEN>; |
| 64 |
gpios = <&pio 89 GPIO_ACTIVE_HIGH>; |
| 65 |
default-state = "off"; |
| 66 |
}; |
| 67 |
|
| 68 |
led-1 { |
| 69 |
label = "bpi-r64:pio:red"; |
| 70 |
color = <LED_COLOR_ID_RED>; |
| 71 |
gpios = <&pio 88 GPIO_ACTIVE_HIGH>; |
| 72 |
default-state = "off"; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
memory@40000000 { |
| 77 |
reg = <0 0x40000000 0 0x40000000>; |
| 78 |
device_type = "memory"; |
| 79 |
}; |
| 80 |
|
| 81 |
reg_1p8v: regulator-1p8v { |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
regulator-name = "fixed-1.8V"; |
| 84 |
regulator-min-microvolt = <1800000>; |
| 85 |
regulator-max-microvolt = <1800000>; |
| 86 |
regulator-always-on; |
| 87 |
}; |
| 88 |
|
| 89 |
reg_3p3v: regulator-3p3v { |
| 90 |
compatible = "regulator-fixed"; |
| 91 |
regulator-name = "fixed-3.3V"; |
| 92 |
regulator-min-microvolt = <3300000>; |
| 93 |
regulator-max-microvolt = <3300000>; |
| 94 |
regulator-boot-on; |
| 95 |
regulator-always-on; |
| 96 |
}; |
| 97 |
|
| 98 |
reg_5v: regulator-5v { |
| 99 |
compatible = "regulator-fixed"; |
| 100 |
regulator-name = "fixed-5V"; |
| 101 |
regulator-min-microvolt = <5000000>; |
| 102 |
regulator-max-microvolt = <5000000>; |
| 103 |
regulator-boot-on; |
| 104 |
regulator-always-on; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
&bch { |
| 109 |
status = "disabled"; |
| 110 |
}; |
| 111 |
|
| 112 |
&btif { |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&cir { |
| 117 |
pinctrl-names = "default"; |
| 118 |
pinctrl-0 = <&irrx_pins>; |
| 119 |
status = "okay"; |
| 120 |
}; |
| 121 |
|
| 122 |
ð { |
| 123 |
status = "okay"; |
| 124 |
gmac0: mac@0 { |
| 125 |
compatible = "mediatek,eth-mac"; |
| 126 |
reg = <0>; |
| 127 |
phy-mode = "2500base-x"; |
| 128 |
|
| 129 |
fixed-link { |
| 130 |
speed = <2500>; |
| 131 |
full-duplex; |
| 132 |
pause; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
gmac1: mac@1 { |
| 137 |
compatible = "mediatek,eth-mac"; |
| 138 |
reg = <1>; |
| 139 |
phy-mode = "rgmii"; |
| 140 |
|
| 141 |
fixed-link { |
| 142 |
speed = <1000>; |
| 143 |
full-duplex; |
| 144 |
pause; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
mdio: mdio-bus { |
| 149 |
#address-cells = <1>; |
| 150 |
#size-cells = <0>; |
| 151 |
|
| 152 |
switch@1f { |
| 153 |
compatible = "mediatek,mt7531"; |
| 154 |
reg = <0x1f>; |
| 155 |
interrupt-controller; |
| 156 |
#interrupt-cells = <1>; |
| 157 |
interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>; |
| 158 |
reset-gpios = <&pio 54 0>; |
| 159 |
|
| 160 |
ports { |
| 161 |
#address-cells = <1>; |
| 162 |
#size-cells = <0>; |
| 163 |
|
| 164 |
port@0 { |
| 165 |
reg = <0>; |
| 166 |
label = "wan"; |
| 167 |
}; |
| 168 |
|
| 169 |
port@1 { |
| 170 |
reg = <1>; |
| 171 |
label = "lan0"; |
| 172 |
}; |
| 173 |
|
| 174 |
port@2 { |
| 175 |
reg = <2>; |
| 176 |
label = "lan1"; |
| 177 |
}; |
| 178 |
|
| 179 |
port@3 { |
| 180 |
reg = <3>; |
| 181 |
label = "lan2"; |
| 182 |
}; |
| 183 |
|
| 184 |
port@4 { |
| 185 |
reg = <4>; |
| 186 |
label = "lan3"; |
| 187 |
}; |
| 188 |
|
| 189 |
port@5 { |
| 190 |
reg = <5>; |
| 191 |
ethernet = <&gmac1>; |
| 192 |
phy-mode = "rgmii"; |
| 193 |
|
| 194 |
fixed-link { |
| 195 |
speed = <1000>; |
| 196 |
full-duplex; |
| 197 |
pause; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
port@6 { |
| 202 |
reg = <6>; |
| 203 |
label = "cpu"; |
| 204 |
ethernet = <&gmac0>; |
| 205 |
phy-mode = "2500base-x"; |
| 206 |
|
| 207 |
fixed-link { |
| 208 |
speed = <2500>; |
| 209 |
full-duplex; |
| 210 |
pause; |
| 211 |
}; |
| 212 |
}; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
&i2c1 { |
| 220 |
pinctrl-names = "default"; |
| 221 |
pinctrl-0 = <&i2c1_pins>; |
| 222 |
status = "okay"; |
| 223 |
}; |
| 224 |
|
| 225 |
&i2c2 { |
| 226 |
pinctrl-names = "default"; |
| 227 |
pinctrl-0 = <&i2c2_pins>; |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&mmc0 { |
| 232 |
pinctrl-names = "default", "state_uhs"; |
| 233 |
pinctrl-0 = <&emmc_pins_default>; |
| 234 |
pinctrl-1 = <&emmc_pins_uhs>; |
| 235 |
status = "okay"; |
| 236 |
bus-width = <8>; |
| 237 |
max-frequency = <50000000>; |
| 238 |
cap-mmc-highspeed; |
| 239 |
mmc-hs200-1_8v; |
| 240 |
vmmc-supply = <®_3p3v>; |
| 241 |
vqmmc-supply = <®_1p8v>; |
| 242 |
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; |
| 243 |
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; |
| 244 |
non-removable; |
| 245 |
}; |
| 246 |
|
| 247 |
&mmc1 { |
| 248 |
pinctrl-names = "default", "state_uhs"; |
| 249 |
pinctrl-0 = <&sd0_pins_default>; |
| 250 |
pinctrl-1 = <&sd0_pins_uhs>; |
| 251 |
status = "okay"; |
| 252 |
bus-width = <4>; |
| 253 |
max-frequency = <50000000>; |
| 254 |
cap-sd-highspeed; |
| 255 |
cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; |
| 256 |
vmmc-supply = <®_3p3v>; |
| 257 |
vqmmc-supply = <®_3p3v>; |
| 258 |
assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; |
| 259 |
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; |
| 260 |
}; |
| 261 |
|
| 262 |
&nandc { |
| 263 |
pinctrl-names = "default"; |
| 264 |
pinctrl-0 = <¶llel_nand_pins>; |
| 265 |
status = "disabled"; |
| 266 |
}; |
| 267 |
|
| 268 |
&bch { |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&snfi { |
| 273 |
pinctrl-names = "default"; |
| 274 |
pinctrl-0 = <&serial_nand_pins>; |
| 275 |
status = "okay"; |
| 276 |
flash@0 { |
| 277 |
compatible = "spi-nand"; |
| 278 |
reg = <0>; |
| 279 |
spi-tx-bus-width = <4>; |
| 280 |
spi-rx-bus-width = <4>; |
| 281 |
nand-ecc-engine = <&snfi>; |
| 282 |
partitions { |
| 283 |
compatible = "fixed-partitions"; |
| 284 |
#address-cells = <1>; |
| 285 |
#size-cells = <1>; |
| 286 |
|
| 287 |
partition@0 { |
| 288 |
label = "bl2"; |
| 289 |
reg = <0x0 0x80000>; |
| 290 |
read-only; |
| 291 |
}; |
| 292 |
|
| 293 |
partition@80000 { |
| 294 |
label = "fip"; |
| 295 |
reg = <0x80000 0x200000>; |
| 296 |
read-only; |
| 297 |
}; |
| 298 |
|
| 299 |
ubi: partition@280000 { |
| 300 |
label = "ubi"; |
| 301 |
reg = <0x280000 0x7d80000>; |
| 302 |
}; |
| 303 |
}; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
&pcie0 { |
| 308 |
pinctrl-names = "default"; |
| 309 |
pinctrl-0 = <&pcie0_pins>; |
| 310 |
status = "okay"; |
| 311 |
}; |
| 312 |
|
| 313 |
&pcie1 { |
| 314 |
pinctrl-names = "default"; |
| 315 |
pinctrl-0 = <&pcie1_pins>; |
| 316 |
status = "okay"; |
| 317 |
}; |
| 318 |
|
| 319 |
&pio { |
| 320 |
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and |
| 321 |
* SATA functions. i.e. output-high: PCIe, output-low: SATA |
| 322 |
*/ |
| 323 |
asm-sel-hog { |
| 324 |
gpio-hog; |
| 325 |
gpios = <90 GPIO_ACTIVE_HIGH>; |
| 326 |
output-high; |
| 327 |
}; |
| 328 |
|
| 329 |
/* eMMC is shared pin with parallel NAND */ |
| 330 |
emmc_pins_default: emmc-pins-default { |
| 331 |
mux { |
| 332 |
function = "emmc"; |
| 333 |
groups = "emmc", "emmc_rst"; |
| 334 |
}; |
| 335 |
|
| 336 |
/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", |
| 337 |
* "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, |
| 338 |
* DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively |
| 339 |
*/ |
| 340 |
conf-cmd-dat { |
| 341 |
pins = "NDL0", "NDL1", "NDL2", |
| 342 |
"NDL3", "NDL4", "NDL5", |
| 343 |
"NDL6", "NDL7", "NRB"; |
| 344 |
input-enable; |
| 345 |
bias-pull-up; |
| 346 |
}; |
| 347 |
|
| 348 |
conf-clk { |
| 349 |
pins = "NCLE"; |
| 350 |
bias-pull-down; |
| 351 |
}; |
| 352 |
}; |
| 353 |
|
| 354 |
emmc_pins_uhs: emmc-pins-uhs { |
| 355 |
mux { |
| 356 |
function = "emmc"; |
| 357 |
groups = "emmc"; |
| 358 |
}; |
| 359 |
|
| 360 |
conf-cmd-dat { |
| 361 |
pins = "NDL0", "NDL1", "NDL2", |
| 362 |
"NDL3", "NDL4", "NDL5", |
| 363 |
"NDL6", "NDL7", "NRB"; |
| 364 |
input-enable; |
| 365 |
drive-strength = <4>; |
| 366 |
bias-pull-up; |
| 367 |
}; |
| 368 |
|
| 369 |
conf-clk { |
| 370 |
pins = "NCLE"; |
| 371 |
drive-strength = <4>; |
| 372 |
bias-pull-down; |
| 373 |
}; |
| 374 |
}; |
| 375 |
|
| 376 |
eth_pins: eth-pins { |
| 377 |
mux { |
| 378 |
function = "eth"; |
| 379 |
groups = "mdc_mdio", "rgmii_via_gmac2"; |
| 380 |
}; |
| 381 |
}; |
| 382 |
|
| 383 |
i2c1_pins: i2c1-pins { |
| 384 |
mux { |
| 385 |
function = "i2c"; |
| 386 |
groups = "i2c1_0"; |
| 387 |
}; |
| 388 |
}; |
| 389 |
|
| 390 |
i2c2_pins: i2c2-pins { |
| 391 |
mux { |
| 392 |
function = "i2c"; |
| 393 |
groups = "i2c2_0"; |
| 394 |
}; |
| 395 |
}; |
| 396 |
|
| 397 |
i2s1_pins: i2s1-pins { |
| 398 |
mux { |
| 399 |
function = "i2s"; |
| 400 |
groups = "i2s_out_mclk_bclk_ws", |
| 401 |
"i2s1_in_data", |
| 402 |
"i2s1_out_data"; |
| 403 |
}; |
| 404 |
|
| 405 |
conf { |
| 406 |
pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", |
| 407 |
"I2S_WS", "I2S_MCLK"; |
| 408 |
drive-strength = <12>; |
| 409 |
bias-pull-down; |
| 410 |
}; |
| 411 |
}; |
| 412 |
|
| 413 |
irrx_pins: irrx-pins { |
| 414 |
mux { |
| 415 |
function = "ir"; |
| 416 |
groups = "ir_1_rx"; |
| 417 |
}; |
| 418 |
}; |
| 419 |
|
| 420 |
irtx_pins: irtx-pins { |
| 421 |
mux { |
| 422 |
function = "ir"; |
| 423 |
groups = "ir_1_tx"; |
| 424 |
}; |
| 425 |
}; |
| 426 |
|
| 427 |
/* Parallel nand is shared pin with eMMC */ |
| 428 |
parallel_nand_pins: parallel-nand-pins { |
| 429 |
mux { |
| 430 |
function = "flash"; |
| 431 |
groups = "par_nand"; |
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
pcie0_pins: pcie0-pins { |
| 436 |
mux { |
| 437 |
function = "pcie"; |
| 438 |
groups = "pcie0_pad_perst", |
| 439 |
"pcie0_1_waken", |
| 440 |
"pcie0_1_clkreq"; |
| 441 |
}; |
| 442 |
}; |
| 443 |
|
| 444 |
pcie1_pins: pcie1-pins { |
| 445 |
mux { |
| 446 |
function = "pcie"; |
| 447 |
groups = "pcie1_pad_perst", |
| 448 |
"pcie1_0_waken", |
| 449 |
"pcie1_0_clkreq"; |
| 450 |
}; |
| 451 |
}; |
| 452 |
|
| 453 |
pmic_bus_pins: pmic-bus-pins { |
| 454 |
mux { |
| 455 |
function = "pmic"; |
| 456 |
groups = "pmic_bus"; |
| 457 |
}; |
| 458 |
}; |
| 459 |
|
| 460 |
pwm_pins: pwm-pins { |
| 461 |
mux { |
| 462 |
function = "pwm"; |
| 463 |
groups = "pwm_ch1_0", /* mt7622_pwm_ch1_0_pins[] = { 51, }; */ |
| 464 |
"pwm_ch2_0", /* mt7622_pwm_ch2_0_pins[] = { 52, }; */ |
| 465 |
"pwm_ch3_2", /* mt7622_pwm_ch3_2_pins[] = { 97, }; */ |
| 466 |
"pwm_ch4_1", /* mt7622_pwm_ch4_1_pins[] = { 67, }; */ |
| 467 |
"pwm_ch5_0", /* mt7622_pwm_ch5_0_pins[] = { 68, }; */ |
| 468 |
"pwm_ch6_0"; /* mt7622_pwm_ch6_0_pins[] = { 69, }; */ |
| 469 |
}; |
| 470 |
}; |
| 471 |
|
| 472 |
wled_pins: wled-pins { |
| 473 |
mux { |
| 474 |
function = "led"; |
| 475 |
groups = "wled"; |
| 476 |
}; |
| 477 |
}; |
| 478 |
|
| 479 |
sd0_pins_default: sd0-pins-default { |
| 480 |
mux { |
| 481 |
function = "sd"; |
| 482 |
groups = "sd_0"; |
| 483 |
}; |
| 484 |
|
| 485 |
/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", |
| 486 |
* "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, |
| 487 |
* DAT2, DAT3, CMD, CLK for SD respectively. |
| 488 |
*/ |
| 489 |
conf-cmd-data { |
| 490 |
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", |
| 491 |
"I2S2_IN","I2S4_OUT"; |
| 492 |
input-enable; |
| 493 |
drive-strength = <8>; |
| 494 |
bias-pull-up; |
| 495 |
}; |
| 496 |
conf-clk { |
| 497 |
pins = "I2S3_OUT"; |
| 498 |
drive-strength = <12>; |
| 499 |
bias-pull-down; |
| 500 |
}; |
| 501 |
conf-cd { |
| 502 |
pins = "TXD3"; |
| 503 |
bias-pull-up; |
| 504 |
}; |
| 505 |
}; |
| 506 |
|
| 507 |
sd0_pins_uhs: sd0-pins-uhs { |
| 508 |
mux { |
| 509 |
function = "sd"; |
| 510 |
groups = "sd_0"; |
| 511 |
}; |
| 512 |
|
| 513 |
conf-cmd-data { |
| 514 |
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", |
| 515 |
"I2S2_IN","I2S4_OUT"; |
| 516 |
input-enable; |
| 517 |
bias-pull-up; |
| 518 |
}; |
| 519 |
|
| 520 |
conf-clk { |
| 521 |
pins = "I2S3_OUT"; |
| 522 |
bias-pull-down; |
| 523 |
}; |
| 524 |
}; |
| 525 |
|
| 526 |
/* Serial NAND is shared pin with SPI-NOR */ |
| 527 |
serial_nand_pins: serial-nand-pins { |
| 528 |
mux { |
| 529 |
function = "flash"; |
| 530 |
groups = "snfi"; |
| 531 |
}; |
| 532 |
}; |
| 533 |
|
| 534 |
spic0_pins: spic0-pins { |
| 535 |
mux { |
| 536 |
function = "spi"; |
| 537 |
groups = "spic0_0"; |
| 538 |
}; |
| 539 |
}; |
| 540 |
|
| 541 |
spic1_pins: spic1-pins { |
| 542 |
mux { |
| 543 |
function = "spi"; |
| 544 |
groups = "spic1_0"; |
| 545 |
}; |
| 546 |
}; |
| 547 |
|
| 548 |
/* SPI-NOR is shared pin with serial NAND */ |
| 549 |
spi_nor_pins: spi-nor-pins { |
| 550 |
mux { |
| 551 |
function = "flash"; |
| 552 |
groups = "spi_nor"; |
| 553 |
}; |
| 554 |
}; |
| 555 |
|
| 556 |
/* serial NAND is shared pin with SPI-NOR */ |
| 557 |
serial_nand_pins: serial-nand-pins { |
| 558 |
mux { |
| 559 |
function = "flash"; |
| 560 |
groups = "snfi"; |
| 561 |
}; |
| 562 |
}; |
| 563 |
|
| 564 |
uart0_pins: uart0-pins { |
| 565 |
mux { |
| 566 |
function = "uart"; |
| 567 |
groups = "uart0_0_tx_rx" ; |
| 568 |
}; |
| 569 |
}; |
| 570 |
|
| 571 |
uart2_pins: uart2-pins { |
| 572 |
mux { |
| 573 |
function = "uart"; |
| 574 |
groups = "uart2_1_tx_rx" ; |
| 575 |
}; |
| 576 |
}; |
| 577 |
|
| 578 |
watchdog_pins: watchdog-pins { |
| 579 |
mux { |
| 580 |
function = "watchdog"; |
| 581 |
groups = "watchdog"; |
| 582 |
}; |
| 583 |
}; |
| 584 |
}; |
| 585 |
|
| 586 |
&pwm { |
| 587 |
pinctrl-names = "default"; |
| 588 |
pinctrl-0 = <&pwm_pins>; |
| 589 |
status = "okay"; |
| 590 |
}; |
| 591 |
|
| 592 |
&pwrap { |
| 593 |
pinctrl-names = "default"; |
| 594 |
pinctrl-0 = <&pmic_bus_pins>; |
| 595 |
|
| 596 |
status = "okay"; |
| 597 |
}; |
| 598 |
|
| 599 |
&sata { |
| 600 |
status = "disabled"; |
| 601 |
}; |
| 602 |
|
| 603 |
&sata_phy { |
| 604 |
status = "disabled"; |
| 605 |
}; |
| 606 |
|
| 607 |
&spi0 { |
| 608 |
pinctrl-names = "default"; |
| 609 |
pinctrl-0 = <&spic0_pins>; |
| 610 |
status = "okay"; |
| 611 |
}; |
| 612 |
|
| 613 |
&spi1 { |
| 614 |
pinctrl-names = "default"; |
| 615 |
pinctrl-0 = <&spic1_pins>; |
| 616 |
}; |
| 617 |
|
| 618 |
&ssusb { |
| 619 |
vusb33-supply = <®_3p3v>; |
| 620 |
vbus-supply = <®_5v>; |
| 621 |
status = "okay"; |
| 622 |
}; |
| 623 |
|
| 624 |
&u3phy { |
| 625 |
status = "okay"; |
| 626 |
}; |
| 627 |
|
| 628 |
&uart0 { |
| 629 |
pinctrl-names = "default"; |
| 630 |
pinctrl-0 = <&uart0_pins>; |
| 631 |
status = "okay"; |
| 632 |
}; |
| 633 |
|
| 634 |
&uart2 { |
| 635 |
pinctrl-names = "default"; |
| 636 |
pinctrl-0 = <&uart2_pins>; |
| 637 |
}; |
| 638 |
|
| 639 |
&watchdog { |
| 640 |
pinctrl-names = "default"; |
| 641 |
pinctrl-0 = <&watchdog_pins>; |
| 642 |
status = "okay"; |
| 643 |
}; |
| 644 |
|
| 645 |
&wmac { |
| 646 |
status = "okay"; |
| 647 |
}; |