Debian Codegraph @

scripts/dtc/include-prefixes/arm64/mediatek/mt6795-sony-xperia-m5.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (c) 2022, Collabora Ltd
4 * Author: AngeloGioacchino Del Regno <[email protected]>
5 */
6
7 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include "mt6795.dtsi"
10 #include "mt6331.dtsi"
11
12 / {
13 model = "Sony Xperia M5";
14 compatible = "sony,xperia-m5", "mediatek,mt6795";
15 chassis-type = "handset";
16
17 aliases {
18 mmc0 = &mmc0;
19 mmc1 = &mmc1;
20 mmc2 = &mmc2;
21 serial0 = &uart0;
22 serial1 = &uart1;
23 };
24
25 backlight_lcd0: backlight {
26 compatible = "led-backlight";
27 leds = <&disp_led_pwm>, <&pmic_bl_led>;
28
29 default-brightness-level = <300>;
30 };
31
32 led-controller-display {
33 compatible = "pwm-leds";
34
35 disp_led_pwm: led-0 {
36 label = "backlight-pwm";
37 pwms = <&pwm0 0 500000>;
38 max-brightness = <1024>;
39 };
40 };
41
42 memory@40000000 {
43 device_type = "memory";
44 reg = <0 0x40000000 0 0x1e800000>;
45 };
46
47 reserved_memory: reserved-memory {
48 #address-cells = <2>;
49 #size-cells = <2>;
50 ranges;
51
52 /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
53 bl31_secmon_reserved: secmon@43000000 {
54 reg = <0 0x43000000 0 0x30000>;
55 no-map;
56 };
57
58 /* preloader and bootloader regions cannot be touched */
59 preloader-region@44800000 {
60 reg = <0 0x44800000 0 0x100000>;
61 no-map;
62 };
63
64 bootloader-region@46000000 {
65 reg = <0 0x46000000 0 0x400000>;
66 no-map;
67 };
68 };
69
70 vreg_disp_avdd: regulator-disp-avdd {
71 compatible = "regulator-fixed";
72 regulator-name = "disp_avdd";
73 regulator-min-microvolt = <5000000>;
74 regulator-max-microvolt = <5000000>;
75 gpio = <&pio 138 GPIO_ACTIVE_HIGH>;
76 enable-active-high;
77 };
78
79 vreg_disp_avee: regulator-disp-avee {
80 compatible = "regulator-fixed";
81 regulator-name = "disp_avee";
82 regulator-min-microvolt = <5000000>;
83 regulator-max-microvolt = <5000000>;
84 gpio = <&pio 139 GPIO_ACTIVE_HIGH>;
85 enable-active-high;
86 };
87
88 vreg_disp_vddh: regulator-disp-vddh {
89 compatible = "regulator-fixed";
90 regulator-name = "disp_vddh";
91 regulator-min-microvolt = <1800000>;
92 regulator-max-microvolt = <1800000>;
93 regulator-always-on;
94 regulator-boot-on;
95 };
96 };
97
98 &dsi0 {
99 status = "okay";
100 #address-cells = <1>;
101 #size-cells = <0>;
102
103 panel: panel@0 {
104 compatible = "sharp,ls060t1sx01";
105 reg = <0>;
106 avdd-supply = <&vreg_disp_avdd>;
107 avee-supply = <&vreg_disp_avee>;
108 vddi-supply = <&mt6331_vgp3_reg>;
109 vddh-supply = <&vreg_disp_vddh>;
110 reset-gpios = <&pio 106 GPIO_ACTIVE_LOW>;
111 backlight = <&backlight_lcd0>;
112
113 pinctrl-0 = <&disp_rst_pins>;
114 pinctrl-names = "default";
115
116 port {
117 panel_in: endpoint {
118 remote-endpoint = <&dsi0_out>;
119 };
120 };
121 };
122
123 port {
124 dsi0_out: endpoint {
125 remote-endpoint = <&panel_in>;
126 };
127 };
128 };
129
130 &fhctl {
131 clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>,
132 <&apmixedsys CLK_APMIXED_MSDCPLL>;
133 mediatek,hopping-ssc-percent = <8>, <5>, <8>;
134 status = "okay";
135 };
136
137 &i2c0 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&i2c0_pins>;
140 status = "okay";
141 };
142
143 &i2c1 {
144 pinctrl-names = "default";
145 pinctrl-0 = <&i2c1_pins>;
146 status = "okay";
147
148 accelerometer@10 {
149 compatible = "bosch,bma255";
150 reg = <0x10>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&accel_pins>;
153 };
154
155 magnetometer@12 {
156 compatible = "bosch,bmm150";
157 reg = <0x12>;
158 };
159 };
160
161 &i2c2 {
162 pinctrl-names = "default";
163 pinctrl-0 = <&i2c2_pins>;
164 status = "okay";
165
166 touchscreen@20 {
167 compatible = "syna,rmi4-i2c";
168 reg = <0x20>;
169 #address-cells = <1>;
170 #size-cells = <0>;
171 interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>;
172 pinctrl-names = "default";
173 pinctrl-0 = <&ts_pins>;
174 syna,startup-delay-ms = <160>;
175 syna,reset-delay-ms = <90>;
176
177 rmi4-f01@1 {
178 reg = <0x1>;
179 syna,nosleep-mode = <1>;
180 };
181
182 rmi4-f12@12 {
183 reg = <0x12>;
184 syna,sensor-type = <1>;
185 };
186 };
187 };
188
189 &i2c3 {
190 pinctrl-names = "default";
191 pinctrl-0 = <&i2c3_pins>;
192 status = "okay";
193
194 pn547: nfc@28 {
195 compatible = "nxp,pn544-i2c";
196 reg = <0x28>;
197 interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&nfc_pins>;
200 enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>;
201 firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>;
202 };
203
204 proximity@48 {
205 compatible = "sensortek,stk3310";
206 reg = <0x48>;
207 interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>;
208 pinctrl-names = "default";
209 pinctrl-0 = <&proximity_pins>;
210 };
211 };
212
213 &mmc0 {
214 /* eMMC controller */
215 mediatek,latch-ck = <4>; /* hs400 */
216 mediatek,hs200-cmd-int-delay = <1>;
217 mediatek,hs400-cmd-int-delay = <1>;
218 mediatek,hs400-ds-dly3 = <0x1a>;
219 non-removable;
220 pinctrl-names = "default", "state_uhs";
221 pinctrl-0 = <&mmc0_pins_default>;
222 pinctrl-1 = <&mmc0_pins_uhs>;
223 vmmc-supply = <&mt6331_vemc33_reg>;
224 vqmmc-supply = <&mt6331_vio18_reg>;
225 status = "okay";
226 };
227
228 &mmc1 {
229 /* MicroSD card slot */
230 pinctrl-names = "default", "state_uhs";
231 pinctrl-0 = <&mmc1_pins_default>;
232 pinctrl-1 = <&mmc1_pins_uhs>;
233 vmmc-supply = <&mt6331_vmc_reg>;
234 vqmmc-supply = <&mt6331_vmch_reg>;
235 status = "okay";
236 };
237
238 &mmc2 {
239 /* SDIO WiFi on MMC2 */
240 pinctrl-names = "default", "state_uhs";
241 pinctrl-0 = <&mmc2_pins_default>;
242 pinctrl-1 = <&mmc2_pins_uhs>;
243 vmmc-supply = <&mt6331_vmc_reg>;
244 vqmmc-supply = <&mt6331_vmch_reg>;
245 status = "okay";
246 };
247
248 &mt6331_vgp3_reg {
249 regulator-min-microvolt = <1800000>;
250 };
251
252 &pio {
253 disp_rst_pins: lcm-pins {
254 pins-rst {
255 pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
256 };
257 };
258
259 mmc0_pins_default: emmc-sdr-pins {
260 pins-cmd-dat {
261 pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
262 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
263 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
264 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
265 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
266 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
267 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
268 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
269 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
270 input-enable;
271 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
272 };
273
274 pins-clk {
275 pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
276 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
277 };
278
279 pins-rst {
280 pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
281 bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
282 };
283 };
284
285 mmc0_pins_uhs: emmc-uhs-pins {
286 pins-cmd-dat {
287 pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
288 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
289 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
290 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
291 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
292 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
293 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
294 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
295 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
296 input-enable;
297 drive-strength = <6>;
298 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
299 };
300
301 pins-clk {
302 pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
303 drive-strength = <6>;
304 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
305 };
306
307 pins-rst {
308 pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
309 drive-strength = <6>;
310 bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
311 };
312
313 pins-ds {
314 pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
315 drive-strength = <6>;
316 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
317 };
318 };
319
320 mmc1_pins_default: microsd-pins {
321 pins-cmd-dat {
322 pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
323 <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
324 <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
325 <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
326 <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
327 input-enable;
328 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
329 drive-strength = <4>;
330 };
331
332 pins-clk {
333 pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
334 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
335 drive-strength = <4>;
336 };
337 };
338
339 mmc1_pins_uhs: microsd-uhs-pins {
340 pins-cmd-dat {
341 pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
342 <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
343 <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
344 <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
345 <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
346 input-enable;
347 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
348 drive-strength = <6>;
349 };
350
351 pins-clk {
352 pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
353 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
354 drive-strength = <8>;
355 };
356 };
357
358 mmc2_pins_default: sdio-pins {
359 pins-cmd-dat {
360 pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
361 <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
362 <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
363 <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
364 <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
365 input-enable;
366 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
367 drive-strength = <4>;
368 };
369
370 pins-clk {
371 pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
372 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
373 drive-strength = <4>;
374 };
375 };
376
377 mmc2_pins_uhs: sdio-uhs-pins {
378 pins-cmd-dat {
379 pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
380 <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
381 <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
382 <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
383 <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
384 input-enable;
385 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
386 drive-strength = <8>;
387 };
388
389 pins-clk {
390 pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
391 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
392 drive-strength = <8>;
393 };
394 };
395
396 nfc_pins: nfc-pins {
397 pins-irq {
398 pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
399 bias-pull-down;
400 input-enable;
401 };
402
403 pins-fw-ven {
404 pinmux = <PINMUX_GPIO94__FUNC_GPIO94>,
405 <PINMUX_GPIO149__FUNC_GPIO149>;
406 };
407 };
408
409 ts_pins: touchscreen-pins {
410 pins-irq {
411 pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
412 bias-pull-up;
413 input-enable;
414 };
415
416 pins-rst {
417 pinmux = <PINMUX_GPIO102__FUNC_GPIO102>;
418 output-high;
419 };
420 };
421
422 proximity_pins: proximity-pins {
423 pins-irq {
424 pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
425 bias-pull-up;
426 input-enable;
427 };
428 };
429
430 accel_pins: accelerometer-pins {
431 pins-irq {
432 pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
433 bias-pull-up;
434 input-enable;
435 };
436 };
437
438 i2c0_pins: i2c0-pins {
439 pins-bus {
440 pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
441 <PINMUX_GPIO46__FUNC_SCL0>;
442 input-enable;
443 };
444 };
445
446 i2c1_pins: i2c1-pins {
447 pins-bus {
448 pinmux = <PINMUX_GPIO125__FUNC_SDA1>,
449 <PINMUX_GPIO126__FUNC_SCL1>;
450 bias-disable;
451 };
452 };
453
454 i2c2_pins: i2c2-pins {
455 pins-bus {
456 pinmux = <PINMUX_GPIO43__FUNC_SDA2>,
457 <PINMUX_GPIO44__FUNC_SCL2>;
458 bias-disable;
459 };
460 };
461
462 i2c3_pins: i2c3-pins {
463 pins-bus {
464 pinmux = <PINMUX_GPIO136__FUNC_SDA3>,
465 <PINMUX_GPIO137__FUNC_SCL3>;
466 bias-disable;
467 };
468 };
469
470 i2c4_pins: i2c4-pins {
471 pins-bus {
472 pinmux = <PINMUX_GPIO100__FUNC_SDA4>,
473 <PINMUX_GPIO101__FUNC_SCL4>;
474 bias-disable;
475 };
476 };
477
478 uart0_pins: uart0-pins {
479 pins-rx {
480 pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
481 bias-pull-up;
482 input-enable;
483 };
484 pins-tx {
485 pinmux = <PINMUX_GPIO114__FUNC_UTXD0>;
486 output-high;
487 };
488 };
489
490 uart2_pins: uart2-pins {
491 pins-rx {
492 pinmux = <PINMUX_GPIO31__FUNC_URXD2>;
493 bias-pull-up;
494 input-enable;
495 };
496 pins-tx {
497 pinmux = <PINMUX_GPIO32__FUNC_UTXD2>;
498 };
499 };
500 };
501
502 &pmic {
503 /*
504 * Smartphones, including the Xperia M5, are equipped with a companion
505 * MT6332 PMIC: when this is present, the main MT6331 PMIC will fire
506 * an interrupt on the companion, so we use the MT6332 IRQ GPIO.
507 */
508 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
509
510 leds {
511 compatible = "mediatek,mt6332-led";
512 #address-cells = <1>;
513 #size-cells = <0>;
514
515 pmic_bl_led: led@0 {
516 reg = <0>;
517 label = "backlight-pmic";
518 };
519 };
520 };
521
522 &pwm0 {
523 status = "okay";
524 };
525
526 &uart0 {
527 status = "okay";
528
529 pinctrl-names = "default";
530 pinctrl-0 = <&uart0_pins>;
531 };
532
533 &uart2 {
534 status = "okay";
535
536 pinctrl-names = "default";
537 pinctrl-0 = <&uart2_pins>;
538 };