| 1 |
/* |
| 2 |
* Copyright (c) 2017 MediaTek Inc. |
| 3 |
* Author: YT Shen <[email protected]> |
| 4 |
* |
| 5 |
* SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include "mt2712e.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "MediaTek MT2712 evaluation board"; |
| 14 |
chassis-type = "embedded"; |
| 15 |
compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &uart0; |
| 19 |
}; |
| 20 |
|
| 21 |
memory@40000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0 0x40000000 0 0x80000000>; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = "serial0:921600n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
cpus_fixed_vproc0: regulator-vproc-buck0 { |
| 31 |
compatible = "regulator-fixed"; |
| 32 |
regulator-name = "vproc_buck0"; |
| 33 |
regulator-min-microvolt = <1000000>; |
| 34 |
regulator-max-microvolt = <1000000>; |
| 35 |
}; |
| 36 |
|
| 37 |
cpus_fixed_vproc1: regulator-vproc-buck1 { |
| 38 |
compatible = "regulator-fixed"; |
| 39 |
regulator-name = "vproc_buck1"; |
| 40 |
regulator-min-microvolt = <1000000>; |
| 41 |
regulator-max-microvolt = <1000000>; |
| 42 |
}; |
| 43 |
|
| 44 |
extcon_usb: extcon_iddig { |
| 45 |
compatible = "linux,extcon-usb-gpio"; |
| 46 |
id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; |
| 47 |
}; |
| 48 |
|
| 49 |
extcon_usb1: extcon_iddig1 { |
| 50 |
compatible = "linux,extcon-usb-gpio"; |
| 51 |
id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>; |
| 52 |
}; |
| 53 |
|
| 54 |
usb_p0_vbus: regulator-usb-p0-vbus { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
regulator-name = "p0_vbus"; |
| 57 |
regulator-min-microvolt = <5000000>; |
| 58 |
regulator-max-microvolt = <5000000>; |
| 59 |
gpio = <&pio 13 GPIO_ACTIVE_HIGH>; |
| 60 |
enable-active-high; |
| 61 |
}; |
| 62 |
|
| 63 |
usb_p1_vbus: regulator-usb-p1-vbus { |
| 64 |
compatible = "regulator-fixed"; |
| 65 |
regulator-name = "p1_vbus"; |
| 66 |
regulator-min-microvolt = <5000000>; |
| 67 |
regulator-max-microvolt = <5000000>; |
| 68 |
gpio = <&pio 15 GPIO_ACTIVE_HIGH>; |
| 69 |
enable-active-high; |
| 70 |
}; |
| 71 |
|
| 72 |
usb_p2_vbus: regulator-usb-p2-vbus { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
regulator-name = "p2_vbus"; |
| 75 |
regulator-min-microvolt = <5000000>; |
| 76 |
regulator-max-microvolt = <5000000>; |
| 77 |
gpio = <&pio 16 GPIO_ACTIVE_HIGH>; |
| 78 |
enable-active-high; |
| 79 |
}; |
| 80 |
|
| 81 |
usb_p3_vbus: regulator-usb-p3-vbus { |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
regulator-name = "p3_vbus"; |
| 84 |
regulator-min-microvolt = <5000000>; |
| 85 |
regulator-max-microvolt = <5000000>; |
| 86 |
gpio = <&pio 17 GPIO_ACTIVE_HIGH>; |
| 87 |
enable-active-high; |
| 88 |
regulator-always-on; |
| 89 |
}; |
| 90 |
|
| 91 |
}; |
| 92 |
|
| 93 |
&auxadc { |
| 94 |
status = "okay"; |
| 95 |
}; |
| 96 |
|
| 97 |
&cpu0 { |
| 98 |
proc-supply = <&cpus_fixed_vproc0>; |
| 99 |
}; |
| 100 |
|
| 101 |
&cpu1 { |
| 102 |
proc-supply = <&cpus_fixed_vproc0>; |
| 103 |
}; |
| 104 |
|
| 105 |
&cpu2 { |
| 106 |
proc-supply = <&cpus_fixed_vproc1>; |
| 107 |
}; |
| 108 |
|
| 109 |
ð { |
| 110 |
phy-mode = "rgmii-rxid"; |
| 111 |
phy-handle = <ðernet_phy0>; |
| 112 |
mediatek,tx-delay-ps = <1530>; |
| 113 |
snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; |
| 114 |
snps,reset-delays-us = <0 10000 10000>; |
| 115 |
pinctrl-names = "default", "sleep"; |
| 116 |
pinctrl-0 = <ð_default>; |
| 117 |
pinctrl-1 = <ð_sleep>; |
| 118 |
mediatek,mac-wol; |
| 119 |
status = "okay"; |
| 120 |
|
| 121 |
mdio { |
| 122 |
compatible = "snps,dwmac-mdio"; |
| 123 |
#address-cells = <1>; |
| 124 |
#size-cells = <0>; |
| 125 |
ethernet_phy0: ethernet-phy@5 { |
| 126 |
compatible = "ethernet-phy-id0243.0d90"; |
| 127 |
reg = <0x5>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
&pio { |
| 133 |
eth_default: eth-default-pins { |
| 134 |
tx_pins { |
| 135 |
pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>, |
| 136 |
<MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>, |
| 137 |
<MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>, |
| 138 |
<MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>, |
| 139 |
<MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>, |
| 140 |
<MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>; |
| 141 |
drive-strength = <8>; |
| 142 |
}; |
| 143 |
rx_pins { |
| 144 |
pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>, |
| 145 |
<MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>, |
| 146 |
<MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>, |
| 147 |
<MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>, |
| 148 |
<MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>, |
| 149 |
<MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>; |
| 150 |
input-enable; |
| 151 |
}; |
| 152 |
mdio_pins { |
| 153 |
pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>, |
| 154 |
<MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>; |
| 155 |
drive-strength = <8>; |
| 156 |
input-enable; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
eth_sleep: eth-sleep-pins { |
| 161 |
tx_pins { |
| 162 |
pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>, |
| 163 |
<MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>, |
| 164 |
<MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>, |
| 165 |
<MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>, |
| 166 |
<MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>, |
| 167 |
<MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>; |
| 168 |
}; |
| 169 |
rx_pins { |
| 170 |
pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>, |
| 171 |
<MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>, |
| 172 |
<MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>, |
| 173 |
<MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>, |
| 174 |
<MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>, |
| 175 |
<MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>; |
| 176 |
input-disable; |
| 177 |
}; |
| 178 |
mdio_pins { |
| 179 |
pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>, |
| 180 |
<MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>; |
| 181 |
input-disable; |
| 182 |
bias-disable; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
usb0_id_pins_float: usb0-iddig-pins { |
| 187 |
pins_iddig { |
| 188 |
pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; |
| 189 |
bias-pull-up; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
usb1_id_pins_float: usb1-iddig-pins { |
| 194 |
pins_iddig { |
| 195 |
pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>; |
| 196 |
bias-pull-up; |
| 197 |
}; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
&ssusb { |
| 202 |
vbus-supply = <&usb_p0_vbus>; |
| 203 |
extcon = <&extcon_usb>; |
| 204 |
dr_mode = "otg"; |
| 205 |
wakeup-source; |
| 206 |
mediatek,u3p-dis-msk = <0x1>; |
| 207 |
//enable-manual-drd; |
| 208 |
//maximum-speed = "full-speed"; |
| 209 |
pinctrl-names = "default"; |
| 210 |
pinctrl-0 = <&usb0_id_pins_float>; |
| 211 |
status = "okay"; |
| 212 |
}; |
| 213 |
|
| 214 |
&ssusb1 { |
| 215 |
vbus-supply = <&usb_p1_vbus>; |
| 216 |
extcon = <&extcon_usb1>; |
| 217 |
dr_mode = "otg"; |
| 218 |
//mediatek,u3p-dis-msk = <0x1>; |
| 219 |
enable-manual-drd; |
| 220 |
wakeup-source; |
| 221 |
//maximum-speed = "full-speed"; |
| 222 |
pinctrl-names = "default"; |
| 223 |
pinctrl-0 = <&usb1_id_pins_float>; |
| 224 |
status = "okay"; |
| 225 |
}; |
| 226 |
|
| 227 |
&uart0 { |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&usb_host0 { |
| 232 |
vbus-supply = <&usb_p2_vbus>; |
| 233 |
status = "okay"; |
| 234 |
}; |
| 235 |
|
| 236 |
&usb_host1 { |
| 237 |
status = "okay"; |
| 238 |
}; |