| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's ExynosAutov920 SoC device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2023 Samsung Electronics Co., Ltd. |
| 6 |
* |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <dt-bindings/clock/samsung,exynosautov920.h> |
| 10 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 |
#include <dt-bindings/soc/samsung,exynos-usi.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
compatible = "samsung,exynosautov920"; |
| 15 |
#address-cells = <2>; |
| 16 |
#size-cells = <1>; |
| 17 |
|
| 18 |
interrupt-parent = <&gic>; |
| 19 |
|
| 20 |
aliases { |
| 21 |
pinctrl0 = &pinctrl_alive; |
| 22 |
pinctrl1 = &pinctrl_aud; |
| 23 |
pinctrl2 = &pinctrl_hsi0; |
| 24 |
pinctrl3 = &pinctrl_hsi1; |
| 25 |
pinctrl4 = &pinctrl_hsi2; |
| 26 |
pinctrl5 = &pinctrl_hsi2ufs; |
| 27 |
pinctrl6 = &pinctrl_peric0; |
| 28 |
pinctrl7 = &pinctrl_peric1; |
| 29 |
}; |
| 30 |
|
| 31 |
arm-pmu { |
| 32 |
compatible = "arm,cortex-a78-pmu"; |
| 33 |
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| 34 |
}; |
| 35 |
|
| 36 |
xtcxo: clock { |
| 37 |
compatible = "fixed-clock"; |
| 38 |
#clock-cells = <0>; |
| 39 |
clock-output-names = "oscclk"; |
| 40 |
}; |
| 41 |
|
| 42 |
cpus: cpus { |
| 43 |
#address-cells = <2>; |
| 44 |
#size-cells = <0>; |
| 45 |
|
| 46 |
cpu-map { |
| 47 |
cluster0 { |
| 48 |
core0 { |
| 49 |
cpu = <&cpu0>; |
| 50 |
}; |
| 51 |
core1 { |
| 52 |
cpu = <&cpu1>; |
| 53 |
}; |
| 54 |
core2 { |
| 55 |
cpu = <&cpu2>; |
| 56 |
}; |
| 57 |
core3 { |
| 58 |
cpu = <&cpu3>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
cluster1 { |
| 63 |
core0 { |
| 64 |
cpu = <&cpu4>; |
| 65 |
}; |
| 66 |
core1 { |
| 67 |
cpu = <&cpu5>; |
| 68 |
}; |
| 69 |
core2 { |
| 70 |
cpu = <&cpu6>; |
| 71 |
}; |
| 72 |
core3 { |
| 73 |
cpu = <&cpu7>; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
cluster2 { |
| 78 |
core0 { |
| 79 |
cpu = <&cpu8>; |
| 80 |
}; |
| 81 |
core1 { |
| 82 |
cpu = <&cpu9>; |
| 83 |
}; |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
cpu0: cpu@0 { |
| 88 |
device_type = "cpu"; |
| 89 |
compatible = "arm,cortex-a78ae"; |
| 90 |
reg = <0x0 0x0>; |
| 91 |
enable-method = "psci"; |
| 92 |
i-cache-size = <0x10000>; |
| 93 |
i-cache-line-size = <64>; |
| 94 |
i-cache-sets = <256>; |
| 95 |
d-cache-size = <0x10000>; |
| 96 |
d-cache-line-size = <64>; |
| 97 |
d-cache-sets = <256>; |
| 98 |
next-level-cache = <&l2_cache_cl0>; |
| 99 |
}; |
| 100 |
|
| 101 |
cpu1: cpu@100 { |
| 102 |
device_type = "cpu"; |
| 103 |
compatible = "arm,cortex-a78ae"; |
| 104 |
reg = <0x0 0x100>; |
| 105 |
enable-method = "psci"; |
| 106 |
i-cache-size = <0x10000>; |
| 107 |
i-cache-line-size = <64>; |
| 108 |
i-cache-sets = <256>; |
| 109 |
d-cache-size = <0x10000>; |
| 110 |
d-cache-line-size = <64>; |
| 111 |
d-cache-sets = <256>; |
| 112 |
next-level-cache = <&l2_cache_cl0>; |
| 113 |
}; |
| 114 |
|
| 115 |
cpu2: cpu@200 { |
| 116 |
device_type = "cpu"; |
| 117 |
compatible = "arm,cortex-a78ae"; |
| 118 |
reg = <0x0 0x200>; |
| 119 |
enable-method = "psci"; |
| 120 |
i-cache-size = <0x10000>; |
| 121 |
i-cache-line-size = <64>; |
| 122 |
i-cache-sets = <256>; |
| 123 |
d-cache-size = <0x10000>; |
| 124 |
d-cache-line-size = <64>; |
| 125 |
d-cache-sets = <256>; |
| 126 |
next-level-cache = <&l2_cache_cl0>; |
| 127 |
}; |
| 128 |
|
| 129 |
cpu3: cpu@300 { |
| 130 |
device_type = "cpu"; |
| 131 |
compatible = "arm,cortex-a78ae"; |
| 132 |
reg = <0x0 0x300>; |
| 133 |
enable-method = "psci"; |
| 134 |
i-cache-size = <0x10000>; |
| 135 |
i-cache-line-size = <64>; |
| 136 |
i-cache-sets = <256>; |
| 137 |
d-cache-size = <0x10000>; |
| 138 |
d-cache-line-size = <64>; |
| 139 |
d-cache-sets = <256>; |
| 140 |
next-level-cache = <&l2_cache_cl0>; |
| 141 |
}; |
| 142 |
|
| 143 |
cpu4: cpu@10000 { |
| 144 |
device_type = "cpu"; |
| 145 |
compatible = "arm,cortex-a78ae"; |
| 146 |
reg = <0x0 0x10000>; |
| 147 |
enable-method = "psci"; |
| 148 |
i-cache-size = <0x10000>; |
| 149 |
i-cache-line-size = <64>; |
| 150 |
i-cache-sets = <256>; |
| 151 |
d-cache-size = <0x10000>; |
| 152 |
d-cache-line-size = <64>; |
| 153 |
d-cache-sets = <256>; |
| 154 |
next-level-cache = <&l2_cache_cl1>; |
| 155 |
}; |
| 156 |
|
| 157 |
cpu5: cpu@10100 { |
| 158 |
device_type = "cpu"; |
| 159 |
compatible = "arm,cortex-a78ae"; |
| 160 |
reg = <0x0 0x10100>; |
| 161 |
enable-method = "psci"; |
| 162 |
i-cache-size = <0x10000>; |
| 163 |
i-cache-line-size = <64>; |
| 164 |
i-cache-sets = <256>; |
| 165 |
d-cache-size = <0x10000>; |
| 166 |
d-cache-line-size = <64>; |
| 167 |
d-cache-sets = <256>; |
| 168 |
next-level-cache = <&l2_cache_cl1>; |
| 169 |
}; |
| 170 |
|
| 171 |
cpu6: cpu@10200 { |
| 172 |
device_type = "cpu"; |
| 173 |
compatible = "arm,cortex-a78ae"; |
| 174 |
reg = <0x0 0x10200>; |
| 175 |
enable-method = "psci"; |
| 176 |
i-cache-size = <0x10000>; |
| 177 |
i-cache-line-size = <64>; |
| 178 |
i-cache-sets = <256>; |
| 179 |
d-cache-size = <0x10000>; |
| 180 |
d-cache-line-size = <64>; |
| 181 |
d-cache-sets = <256>; |
| 182 |
next-level-cache = <&l2_cache_cl1>; |
| 183 |
}; |
| 184 |
|
| 185 |
cpu7: cpu@10300 { |
| 186 |
device_type = "cpu"; |
| 187 |
compatible = "arm,cortex-a78ae"; |
| 188 |
reg = <0x0 0x10300>; |
| 189 |
enable-method = "psci"; |
| 190 |
i-cache-size = <0x10000>; |
| 191 |
i-cache-line-size = <64>; |
| 192 |
i-cache-sets = <256>; |
| 193 |
d-cache-size = <0x10000>; |
| 194 |
d-cache-line-size = <64>; |
| 195 |
d-cache-sets = <256>; |
| 196 |
next-level-cache = <&l2_cache_cl1>; |
| 197 |
}; |
| 198 |
|
| 199 |
cpu8: cpu@20000 { |
| 200 |
device_type = "cpu"; |
| 201 |
compatible = "arm,cortex-a78ae"; |
| 202 |
reg = <0x0 0x20000>; |
| 203 |
enable-method = "psci"; |
| 204 |
i-cache-size = <0x10000>; |
| 205 |
i-cache-line-size = <64>; |
| 206 |
i-cache-sets = <256>; |
| 207 |
d-cache-size = <0x10000>; |
| 208 |
d-cache-line-size = <64>; |
| 209 |
d-cache-sets = <256>; |
| 210 |
next-level-cache = <&l2_cache_cl2>; |
| 211 |
}; |
| 212 |
|
| 213 |
cpu9: cpu@20100 { |
| 214 |
device_type = "cpu"; |
| 215 |
compatible = "arm,cortex-a78ae"; |
| 216 |
reg = <0x0 0x20100>; |
| 217 |
enable-method = "psci"; |
| 218 |
i-cache-size = <0x10000>; |
| 219 |
i-cache-line-size = <64>; |
| 220 |
i-cache-sets = <256>; |
| 221 |
d-cache-size = <0x10000>; |
| 222 |
d-cache-line-size = <64>; |
| 223 |
d-cache-sets = <256>; |
| 224 |
next-level-cache = <&l2_cache_cl2>; |
| 225 |
}; |
| 226 |
|
| 227 |
l2_cache_cl0: l2-cache0 { |
| 228 |
compatible = "cache"; |
| 229 |
cache-level = <2>; |
| 230 |
cache-unified; |
| 231 |
cache-size = <0x40000>; |
| 232 |
cache-line-size = <64>; |
| 233 |
cache-sets = <512>; |
| 234 |
next-level-cache = <&l3_cache_cl0>; |
| 235 |
}; |
| 236 |
|
| 237 |
l2_cache_cl1: l2-cache1 { |
| 238 |
compatible = "cache"; |
| 239 |
cache-level = <2>; |
| 240 |
cache-unified; |
| 241 |
cache-size = <0x40000>; |
| 242 |
cache-line-size = <64>; |
| 243 |
cache-sets = <512>; |
| 244 |
next-level-cache = <&l3_cache_cl1>; |
| 245 |
}; |
| 246 |
|
| 247 |
l2_cache_cl2: l2-cache2 { |
| 248 |
compatible = "cache"; |
| 249 |
cache-level = <2>; |
| 250 |
cache-unified; |
| 251 |
cache-size = <0x40000>; |
| 252 |
cache-line-size = <64>; |
| 253 |
cache-sets = <512>; |
| 254 |
next-level-cache = <&l3_cache_cl2>; |
| 255 |
}; |
| 256 |
|
| 257 |
l3_cache_cl0: l3-cache0 { |
| 258 |
compatible = "cache"; |
| 259 |
cache-level = <3>; |
| 260 |
cache-unified; |
| 261 |
cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-0 */ |
| 262 |
cache-line-size = <64>; |
| 263 |
cache-sets = <2048>; |
| 264 |
}; |
| 265 |
|
| 266 |
l3_cache_cl1: l3-cache1 { |
| 267 |
compatible = "cache"; |
| 268 |
cache-level = <3>; |
| 269 |
cache-unified; |
| 270 |
cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-1 */ |
| 271 |
cache-line-size = <64>; |
| 272 |
cache-sets = <2048>; |
| 273 |
}; |
| 274 |
|
| 275 |
l3_cache_cl2: l3-cache2 { |
| 276 |
compatible = "cache"; |
| 277 |
cache-level = <3>; |
| 278 |
cache-unified; |
| 279 |
cache-size = <0x100000>;/* 1MB L3 cache for cpu cluster-2 */ |
| 280 |
cache-line-size = <64>; |
| 281 |
cache-sets = <1365>; |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
psci { |
| 286 |
compatible = "arm,psci-1.0"; |
| 287 |
method = "smc"; |
| 288 |
}; |
| 289 |
|
| 290 |
soc: soc@0 { |
| 291 |
compatible = "simple-bus"; |
| 292 |
#address-cells = <1>; |
| 293 |
#size-cells = <1>; |
| 294 |
ranges = <0x0 0x0 0x0 0x20000000>; |
| 295 |
|
| 296 |
chipid@10000000 { |
| 297 |
compatible = "samsung,exynosautov920-chipid", |
| 298 |
"samsung,exynos850-chipid"; |
| 299 |
reg = <0x10000000 0x24>; |
| 300 |
}; |
| 301 |
|
| 302 |
cmu_misc: clock-controller@10020000 { |
| 303 |
compatible = "samsung,exynosautov920-cmu-misc"; |
| 304 |
reg = <0x10020000 0x8000>; |
| 305 |
#clock-cells = <1>; |
| 306 |
|
| 307 |
clocks = <&xtcxo>, |
| 308 |
<&cmu_top DOUT_CLKCMU_MISC_NOC>; |
| 309 |
clock-names = "oscclk", |
| 310 |
"noc"; |
| 311 |
}; |
| 312 |
|
| 313 |
watchdog_cl0: watchdog@10060000 { |
| 314 |
compatible = "samsung,exynosautov920-wdt"; |
| 315 |
reg = <0x10060000 0x100>; |
| 316 |
interrupts = <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>; |
| 317 |
clocks = <&xtcxo>, <&xtcxo>; |
| 318 |
clock-names = "watchdog", "watchdog_src"; |
| 319 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 320 |
samsung,cluster-index = <0>; |
| 321 |
}; |
| 322 |
|
| 323 |
watchdog_cl1: watchdog@10070000 { |
| 324 |
compatible = "samsung,exynosautov920-wdt"; |
| 325 |
reg = <0x10070000 0x100>; |
| 326 |
interrupts = <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>; |
| 327 |
clocks = <&xtcxo>, <&xtcxo>; |
| 328 |
clock-names = "watchdog", "watchdog_src"; |
| 329 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 330 |
samsung,cluster-index = <1>; |
| 331 |
}; |
| 332 |
|
| 333 |
gic: interrupt-controller@10400000 { |
| 334 |
compatible = "arm,gic-v3"; |
| 335 |
#interrupt-cells = <3>; |
| 336 |
#address-cells = <0>; |
| 337 |
interrupt-controller; |
| 338 |
reg = <0x10400000 0x10000>, |
| 339 |
<0x10460000 0x140000>; |
| 340 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 341 |
}; |
| 342 |
|
| 343 |
spdma0: dma-controller@10180000 { |
| 344 |
compatible = "arm,pl330", "arm,primecell"; |
| 345 |
reg = <0x10180000 0x1000>; |
| 346 |
interrupts = <GIC_SPI 918 IRQ_TYPE_LEVEL_HIGH>; |
| 347 |
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>; |
| 348 |
clock-names = "apb_pclk"; |
| 349 |
#dma-cells = <1>; |
| 350 |
}; |
| 351 |
|
| 352 |
spdma1: dma-controller@10190000 { |
| 353 |
compatible = "arm,pl330", "arm,primecell"; |
| 354 |
reg = <0x10190000 0x1000>; |
| 355 |
interrupts = <GIC_SPI 917 IRQ_TYPE_LEVEL_HIGH>; |
| 356 |
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>; |
| 357 |
clock-names = "apb_pclk"; |
| 358 |
#dma-cells = <1>; |
| 359 |
}; |
| 360 |
|
| 361 |
pdma0: dma-controller@101a0000 { |
| 362 |
compatible = "arm,pl330", "arm,primecell"; |
| 363 |
reg = <0x101a0000 0x1000>; |
| 364 |
interrupts = <GIC_SPI 916 IRQ_TYPE_LEVEL_HIGH>; |
| 365 |
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>; |
| 366 |
clock-names = "apb_pclk"; |
| 367 |
#dma-cells = <1>; |
| 368 |
}; |
| 369 |
|
| 370 |
pdma1: dma-controller@101b0000 { |
| 371 |
compatible = "arm,pl330", "arm,primecell"; |
| 372 |
reg = <0x101b0000 0x1000>; |
| 373 |
interrupts = <GIC_SPI 915 IRQ_TYPE_LEVEL_HIGH>; |
| 374 |
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>; |
| 375 |
clock-names = "apb_pclk"; |
| 376 |
#dma-cells = <1>; |
| 377 |
}; |
| 378 |
|
| 379 |
pdma2: dma-controller@101c0000 { |
| 380 |
compatible = "arm,pl330", "arm,primecell"; |
| 381 |
reg = <0x101c0000 0x1000>; |
| 382 |
interrupts = <GIC_SPI 914 IRQ_TYPE_LEVEL_HIGH>; |
| 383 |
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>; |
| 384 |
clock-names = "apb_pclk"; |
| 385 |
#dma-cells = <1>; |
| 386 |
}; |
| 387 |
|
| 388 |
pdma3: dma-controller@101d0000 { |
| 389 |
compatible = "arm,pl330", "arm,primecell"; |
| 390 |
reg = <0x101d0000 0x1000>; |
| 391 |
interrupts = <GIC_SPI 913 IRQ_TYPE_LEVEL_HIGH>; |
| 392 |
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>; |
| 393 |
clock-names = "apb_pclk"; |
| 394 |
#dma-cells = <1>; |
| 395 |
}; |
| 396 |
|
| 397 |
pdma4: dma-controller@101e0000 { |
| 398 |
compatible = "arm,pl330", "arm,primecell"; |
| 399 |
reg = <0x101e0000 0x1000>; |
| 400 |
interrupts = <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>; |
| 401 |
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>; |
| 402 |
clock-names = "apb_pclk"; |
| 403 |
#dma-cells = <1>; |
| 404 |
}; |
| 405 |
|
| 406 |
cmu_peric0: clock-controller@10800000 { |
| 407 |
compatible = "samsung,exynosautov920-cmu-peric0"; |
| 408 |
reg = <0x10800000 0x8000>; |
| 409 |
#clock-cells = <1>; |
| 410 |
|
| 411 |
clocks = <&xtcxo>, |
| 412 |
<&cmu_top DOUT_CLKCMU_PERIC0_NOC>, |
| 413 |
<&cmu_top DOUT_CLKCMU_PERIC0_IP>; |
| 414 |
clock-names = "oscclk", |
| 415 |
"noc", |
| 416 |
"ip"; |
| 417 |
}; |
| 418 |
|
| 419 |
syscon_peric0: syscon@10820000 { |
| 420 |
compatible = "samsung,exynosautov920-peric0-sysreg", |
| 421 |
"syscon"; |
| 422 |
reg = <0x10820000 0x2000>; |
| 423 |
}; |
| 424 |
|
| 425 |
pinctrl_peric0: pinctrl@10830000 { |
| 426 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 427 |
reg = <0x10830000 0x10000>; |
| 428 |
interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>; |
| 429 |
}; |
| 430 |
|
| 431 |
usi_0: usi@108800c0 { |
| 432 |
compatible = "samsung,exynosautov920-usi", |
| 433 |
"samsung,exynos850-usi"; |
| 434 |
reg = <0x108800c0 0x20>; |
| 435 |
samsung,sysreg = <&syscon_peric0 0x1000>; |
| 436 |
samsung,mode = <USI_MODE_UART>; |
| 437 |
#address-cells = <1>; |
| 438 |
#size-cells = <1>; |
| 439 |
ranges; |
| 440 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 441 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>; |
| 442 |
clock-names = "pclk", "ipclk"; |
| 443 |
status = "disabled"; |
| 444 |
|
| 445 |
serial_0: serial@10880000 { |
| 446 |
compatible = "samsung,exynosautov920-uart", |
| 447 |
"samsung,exynos850-uart"; |
| 448 |
reg = <0x10880000 0xc0>; |
| 449 |
interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; |
| 450 |
pinctrl-names = "default"; |
| 451 |
pinctrl-0 = <&uart0_bus>; |
| 452 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 453 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>; |
| 454 |
clock-names = "uart", "clk_uart_baud0"; |
| 455 |
samsung,uart-fifosize = <256>; |
| 456 |
status = "disabled"; |
| 457 |
}; |
| 458 |
|
| 459 |
spi_0: spi@10880000 { |
| 460 |
compatible = "samsung,exynosautov920-spi", |
| 461 |
"samsung,exynos850-spi"; |
| 462 |
reg = <0x10880000 0x30>; |
| 463 |
interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; |
| 464 |
pinctrl-names = "default"; |
| 465 |
pinctrl-0 = <&spi0_bus &spi0_cs_func>; |
| 466 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 467 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>; |
| 468 |
clock-names = "spi", "spi_busclk0"; |
| 469 |
samsung,spi-src-clk = <0>; |
| 470 |
dmas = <&pdma0 1>, <&pdma0 0>; |
| 471 |
dma-names = "tx", "rx"; |
| 472 |
num-cs = <1>; |
| 473 |
#address-cells = <1>; |
| 474 |
#size-cells = <0>; |
| 475 |
fifo-depth = <256>; |
| 476 |
status = "disabled"; |
| 477 |
}; |
| 478 |
}; |
| 479 |
|
| 480 |
usi_1: usi@108a00c0 { |
| 481 |
compatible = "samsung,exynosautov920-usi", |
| 482 |
"samsung,exynos850-usi"; |
| 483 |
reg = <0x108a00c0 0x20>; |
| 484 |
samsung,sysreg = <&syscon_peric0 0x1008>; |
| 485 |
samsung,mode = <USI_V2_UART>; |
| 486 |
#address-cells = <1>; |
| 487 |
#size-cells = <1>; |
| 488 |
ranges; |
| 489 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 490 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>; |
| 491 |
clock-names = "pclk", "ipclk"; |
| 492 |
status = "disabled"; |
| 493 |
|
| 494 |
serial_1: serial@108a0000 { |
| 495 |
compatible = "samsung,exynosautov920-uart", |
| 496 |
"samsung,exynos850-uart"; |
| 497 |
reg = <0x108a0000 0xc0>; |
| 498 |
interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>; |
| 499 |
pinctrl-names = "default"; |
| 500 |
pinctrl-0 = <&uart1_bus>; |
| 501 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 502 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>; |
| 503 |
clock-names = "uart", "clk_uart_baud0"; |
| 504 |
samsung,uart-fifosize = <256>; |
| 505 |
status = "disabled"; |
| 506 |
}; |
| 507 |
|
| 508 |
spi_1: spi@108a0000 { |
| 509 |
compatible = "samsung,exynosautov920-spi", |
| 510 |
"samsung,exynos850-spi"; |
| 511 |
reg = <0x108a0000 0x30>; |
| 512 |
interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>; |
| 513 |
pinctrl-names = "default"; |
| 514 |
pinctrl-0 = <&spi1_bus &spi1_cs_func>; |
| 515 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 516 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>; |
| 517 |
clock-names = "spi", "spi_busclk0"; |
| 518 |
samsung,spi-src-clk = <0>; |
| 519 |
dmas = <&pdma0 3>, <&pdma0 2>; |
| 520 |
dma-names = "tx", "rx"; |
| 521 |
num-cs = <1>; |
| 522 |
#address-cells = <1>; |
| 523 |
#size-cells = <0>; |
| 524 |
fifo-depth = <256>; |
| 525 |
status = "disabled"; |
| 526 |
}; |
| 527 |
}; |
| 528 |
|
| 529 |
usi_2: usi@108c00c0 { |
| 530 |
compatible = "samsung,exynosautov920-usi", |
| 531 |
"samsung,exynos850-usi"; |
| 532 |
reg = <0x108c00c0 0x20>; |
| 533 |
samsung,sysreg = <&syscon_peric0 0x1010>; |
| 534 |
samsung,mode = <USI_V2_UART>; |
| 535 |
#address-cells = <1>; |
| 536 |
#size-cells = <1>; |
| 537 |
ranges; |
| 538 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 539 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>; |
| 540 |
clock-names = "pclk", "ipclk"; |
| 541 |
status = "disabled"; |
| 542 |
|
| 543 |
serial_2: serial@108c0000 { |
| 544 |
compatible = "samsung,exynosautov920-uart", |
| 545 |
"samsung,exynos850-uart"; |
| 546 |
reg = <0x108c0000 0xc0>; |
| 547 |
interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>; |
| 548 |
pinctrl-names = "default"; |
| 549 |
pinctrl-0 = <&uart2_bus>; |
| 550 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 551 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>; |
| 552 |
clock-names = "uart", "clk_uart_baud0"; |
| 553 |
samsung,uart-fifosize = <64>; |
| 554 |
status = "disabled"; |
| 555 |
}; |
| 556 |
|
| 557 |
spi_2: spi@108c0000 { |
| 558 |
compatible = "samsung,exynosautov920-spi", |
| 559 |
"samsung,exynos850-spi"; |
| 560 |
reg = <0x108c0000 0x30>; |
| 561 |
interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>; |
| 562 |
pinctrl-names = "default"; |
| 563 |
pinctrl-0 = <&spi2_bus &spi2_cs_func>; |
| 564 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 565 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>; |
| 566 |
clock-names = "spi", "spi_busclk0"; |
| 567 |
samsung,spi-src-clk = <0>; |
| 568 |
dmas = <&pdma0 5>, <&pdma0 4>; |
| 569 |
dma-names = "tx", "rx"; |
| 570 |
num-cs = <1>; |
| 571 |
#address-cells = <1>; |
| 572 |
#size-cells = <0>; |
| 573 |
fifo-depth = <64>; |
| 574 |
status = "disabled"; |
| 575 |
}; |
| 576 |
}; |
| 577 |
|
| 578 |
usi_3: usi@108e00c0 { |
| 579 |
compatible = "samsung,exynosautov920-usi", |
| 580 |
"samsung,exynos850-usi"; |
| 581 |
reg = <0x108e00c0 0x20>; |
| 582 |
samsung,sysreg = <&syscon_peric0 0x1018>; |
| 583 |
samsung,mode = <USI_V2_UART>; |
| 584 |
#address-cells = <1>; |
| 585 |
#size-cells = <1>; |
| 586 |
ranges; |
| 587 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 588 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>; |
| 589 |
clock-names = "pclk", "ipclk"; |
| 590 |
status = "disabled"; |
| 591 |
|
| 592 |
serial_3: serial@108e0000 { |
| 593 |
compatible = "samsung,exynosautov920-uart", |
| 594 |
"samsung,exynos850-uart"; |
| 595 |
reg = <0x108e0000 0xc0>; |
| 596 |
interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>; |
| 597 |
pinctrl-names = "default"; |
| 598 |
pinctrl-0 = <&uart3_bus>; |
| 599 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 600 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>; |
| 601 |
clock-names = "uart", "clk_uart_baud0"; |
| 602 |
samsung,uart-fifosize = <64>; |
| 603 |
status = "disabled"; |
| 604 |
}; |
| 605 |
|
| 606 |
spi_3: spi@108e0000 { |
| 607 |
compatible = "samsung,exynosautov920-spi", |
| 608 |
"samsung,exynos850-spi"; |
| 609 |
reg = <0x108e0000 0x30>; |
| 610 |
interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>; |
| 611 |
pinctrl-names = "default"; |
| 612 |
pinctrl-0 = <&spi3_bus &spi3_cs_func>; |
| 613 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 614 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>; |
| 615 |
clock-names = "spi", "spi_busclk0"; |
| 616 |
samsung,spi-src-clk = <0>; |
| 617 |
dmas = <&pdma0 7>, <&pdma0 6>; |
| 618 |
dma-names = "tx", "rx"; |
| 619 |
num-cs = <1>; |
| 620 |
#address-cells = <1>; |
| 621 |
#size-cells = <0>; |
| 622 |
fifo-depth = <64>; |
| 623 |
status = "disabled"; |
| 624 |
}; |
| 625 |
}; |
| 626 |
|
| 627 |
usi_4: usi@109000c0 { |
| 628 |
compatible = "samsung,exynosautov920-usi", |
| 629 |
"samsung,exynos850-usi"; |
| 630 |
reg = <0x109000c0 0x20>; |
| 631 |
samsung,sysreg = <&syscon_peric0 0x1020>; |
| 632 |
samsung,mode = <USI_V2_UART>; |
| 633 |
#address-cells = <1>; |
| 634 |
#size-cells = <1>; |
| 635 |
ranges; |
| 636 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 637 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>; |
| 638 |
clock-names = "pclk", "ipclk"; |
| 639 |
status = "disabled"; |
| 640 |
|
| 641 |
serial_4: serial@10900000 { |
| 642 |
compatible = "samsung,exynosautov920-uart", |
| 643 |
"samsung,exynos850-uart"; |
| 644 |
reg = <0x10900000 0xc0>; |
| 645 |
interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>; |
| 646 |
pinctrl-names = "default"; |
| 647 |
pinctrl-0 = <&uart4_bus>; |
| 648 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 649 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>; |
| 650 |
clock-names = "uart", "clk_uart_baud0"; |
| 651 |
samsung,uart-fifosize = <64>; |
| 652 |
status = "disabled"; |
| 653 |
}; |
| 654 |
|
| 655 |
spi_4: spi@10900000 { |
| 656 |
compatible = "samsung,exynosautov920-spi", |
| 657 |
"samsung,exynos850-spi"; |
| 658 |
reg = <0x10900000 0x30>; |
| 659 |
interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>; |
| 660 |
pinctrl-names = "default"; |
| 661 |
pinctrl-0 = <&spi4_bus &spi4_cs_func>; |
| 662 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 663 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>; |
| 664 |
clock-names = "spi", "spi_busclk0"; |
| 665 |
samsung,spi-src-clk = <0>; |
| 666 |
dmas = <&pdma0 9>, <&pdma0 8>; |
| 667 |
dma-names = "tx", "rx"; |
| 668 |
num-cs = <1>; |
| 669 |
#address-cells = <1>; |
| 670 |
#size-cells = <0>; |
| 671 |
fifo-depth = <64>; |
| 672 |
status = "disabled"; |
| 673 |
}; |
| 674 |
}; |
| 675 |
|
| 676 |
usi_5: usi@109200c0 { |
| 677 |
compatible = "samsung,exynosautov920-usi", |
| 678 |
"samsung,exynos850-usi"; |
| 679 |
reg = <0x109200c0 0x20>; |
| 680 |
samsung,sysreg = <&syscon_peric0 0x1028>; |
| 681 |
samsung,mode = <USI_V2_UART>; |
| 682 |
#address-cells = <1>; |
| 683 |
#size-cells = <1>; |
| 684 |
ranges; |
| 685 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 686 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>; |
| 687 |
clock-names = "pclk", "ipclk"; |
| 688 |
status = "disabled"; |
| 689 |
|
| 690 |
serial_5: serial@10920000 { |
| 691 |
compatible = "samsung,exynosautov920-uart", |
| 692 |
"samsung,exynos850-uart"; |
| 693 |
reg = <0x10920000 0xc0>; |
| 694 |
interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>; |
| 695 |
pinctrl-names = "default"; |
| 696 |
pinctrl-0 = <&uart5_bus>; |
| 697 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 698 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>; |
| 699 |
clock-names = "uart", "clk_uart_baud0"; |
| 700 |
samsung,uart-fifosize = <64>; |
| 701 |
status = "disabled"; |
| 702 |
}; |
| 703 |
|
| 704 |
spi_5: spi@10920000 { |
| 705 |
compatible = "samsung,exynosautov920-spi", |
| 706 |
"samsung,exynos850-spi"; |
| 707 |
reg = <0x10920000 0x30>; |
| 708 |
interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>; |
| 709 |
pinctrl-names = "default"; |
| 710 |
pinctrl-0 = <&spi5_bus &spi5_cs_func>; |
| 711 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 712 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>; |
| 713 |
clock-names = "spi", "spi_busclk0"; |
| 714 |
samsung,spi-src-clk = <0>; |
| 715 |
dmas = <&pdma0 11>, <&pdma0 10>; |
| 716 |
dma-names = "tx", "rx"; |
| 717 |
num-cs = <1>; |
| 718 |
#address-cells = <1>; |
| 719 |
#size-cells = <0>; |
| 720 |
fifo-depth = <64>; |
| 721 |
status = "disabled"; |
| 722 |
}; |
| 723 |
}; |
| 724 |
|
| 725 |
usi_6: usi@109400c0 { |
| 726 |
compatible = "samsung,exynosautov920-usi", |
| 727 |
"samsung,exynos850-usi"; |
| 728 |
reg = <0x109400c0 0x20>; |
| 729 |
samsung,sysreg = <&syscon_peric0 0x1030>; |
| 730 |
samsung,mode = <USI_V2_UART>; |
| 731 |
#address-cells = <1>; |
| 732 |
#size-cells = <1>; |
| 733 |
ranges; |
| 734 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 735 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>; |
| 736 |
clock-names = "pclk", "ipclk"; |
| 737 |
status = "disabled"; |
| 738 |
|
| 739 |
serial_6: serial@10940000 { |
| 740 |
compatible = "samsung,exynosautov920-uart", |
| 741 |
"samsung,exynos850-uart"; |
| 742 |
reg = <0x10940000 0xc0>; |
| 743 |
interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>; |
| 744 |
pinctrl-names = "default"; |
| 745 |
pinctrl-0 = <&uart6_bus>; |
| 746 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 747 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>; |
| 748 |
clock-names = "uart", "clk_uart_baud0"; |
| 749 |
samsung,uart-fifosize = <64>; |
| 750 |
status = "disabled"; |
| 751 |
}; |
| 752 |
|
| 753 |
spi_6: spi@10940000 { |
| 754 |
compatible = "samsung,exynosautov920-spi", |
| 755 |
"samsung,exynos850-spi"; |
| 756 |
reg = <0x10940000 0x30>; |
| 757 |
interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>; |
| 758 |
pinctrl-names = "default"; |
| 759 |
pinctrl-0 = <&spi6_bus &spi6_cs_func>; |
| 760 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 761 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>; |
| 762 |
clock-names = "spi", "spi_busclk0"; |
| 763 |
samsung,spi-src-clk = <0>; |
| 764 |
dmas = <&pdma0 13>, <&pdma0 12>; |
| 765 |
dma-names = "tx", "rx"; |
| 766 |
num-cs = <1>; |
| 767 |
#address-cells = <1>; |
| 768 |
#size-cells = <0>; |
| 769 |
fifo-depth = <64>; |
| 770 |
status = "disabled"; |
| 771 |
}; |
| 772 |
}; |
| 773 |
|
| 774 |
usi_7: usi@109600c0 { |
| 775 |
compatible = "samsung,exynosautov920-usi", |
| 776 |
"samsung,exynos850-usi"; |
| 777 |
reg = <0x109600c0 0x20>; |
| 778 |
samsung,sysreg = <&syscon_peric0 0x1038>; |
| 779 |
samsung,mode = <USI_V2_UART>; |
| 780 |
#address-cells = <1>; |
| 781 |
#size-cells = <1>; |
| 782 |
ranges; |
| 783 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 784 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>; |
| 785 |
clock-names = "pclk", "ipclk"; |
| 786 |
status = "disabled"; |
| 787 |
|
| 788 |
serial_7: serial@10960000 { |
| 789 |
compatible = "samsung,exynosautov920-uart", |
| 790 |
"samsung,exynos850-uart"; |
| 791 |
reg = <0x10960000 0xc0>; |
| 792 |
interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>; |
| 793 |
pinctrl-names = "default"; |
| 794 |
pinctrl-0 = <&uart7_bus>; |
| 795 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 796 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>; |
| 797 |
clock-names = "uart", "clk_uart_baud0"; |
| 798 |
samsung,uart-fifosize = <64>; |
| 799 |
status = "disabled"; |
| 800 |
}; |
| 801 |
|
| 802 |
spi_7: spi@10960000 { |
| 803 |
compatible = "samsung,exynosautov920-spi", |
| 804 |
"samsung,exynos850-spi"; |
| 805 |
reg = <0x10960000 0x30>; |
| 806 |
interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>; |
| 807 |
pinctrl-names = "default"; |
| 808 |
pinctrl-0 = <&spi7_bus &spi7_cs_func>; |
| 809 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 810 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>; |
| 811 |
clock-names = "spi", "spi_busclk0"; |
| 812 |
samsung,spi-src-clk = <0>; |
| 813 |
dmas = <&pdma0 15>, <&pdma0 14>; |
| 814 |
dma-names = "tx", "rx"; |
| 815 |
num-cs = <1>; |
| 816 |
#address-cells = <1>; |
| 817 |
#size-cells = <0>; |
| 818 |
fifo-depth = <64>; |
| 819 |
status = "disabled"; |
| 820 |
}; |
| 821 |
}; |
| 822 |
|
| 823 |
usi_8: usi@109800c0 { |
| 824 |
compatible = "samsung,exynosautov920-usi", |
| 825 |
"samsung,exynos850-usi"; |
| 826 |
reg = <0x109800c0 0x20>; |
| 827 |
samsung,sysreg = <&syscon_peric0 0x1040>; |
| 828 |
samsung,mode = <USI_V2_UART>; |
| 829 |
#address-cells = <1>; |
| 830 |
#size-cells = <1>; |
| 831 |
ranges; |
| 832 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 833 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>; |
| 834 |
clock-names = "pclk", "ipclk"; |
| 835 |
status = "disabled"; |
| 836 |
|
| 837 |
serial_8: serial@10980000 { |
| 838 |
compatible = "samsung,exynosautov920-uart", |
| 839 |
"samsung,exynos850-uart"; |
| 840 |
reg = <0x10980000 0xc0>; |
| 841 |
interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>; |
| 842 |
pinctrl-names = "default"; |
| 843 |
pinctrl-0 = <&uart8_bus>; |
| 844 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 845 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>; |
| 846 |
clock-names = "uart", "clk_uart_baud0"; |
| 847 |
samsung,uart-fifosize = <64>; |
| 848 |
status = "disabled"; |
| 849 |
}; |
| 850 |
|
| 851 |
spi_8: spi@10980000 { |
| 852 |
compatible = "samsung,exynosautov920-spi", |
| 853 |
"samsung,exynos850-spi"; |
| 854 |
reg = <0x10980000 0x30>; |
| 855 |
interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>; |
| 856 |
pinctrl-names = "default"; |
| 857 |
pinctrl-0 = <&spi8_bus &spi8_cs_func>; |
| 858 |
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, |
| 859 |
<&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>; |
| 860 |
clock-names = "spi", "spi_busclk0"; |
| 861 |
samsung,spi-src-clk = <0>; |
| 862 |
dmas = <&pdma0 17>, <&pdma0 16>; |
| 863 |
dma-names = "tx", "rx"; |
| 864 |
num-cs = <1>; |
| 865 |
#address-cells = <1>; |
| 866 |
#size-cells = <0>; |
| 867 |
fifo-depth = <64>; |
| 868 |
status = "disabled"; |
| 869 |
}; |
| 870 |
|
| 871 |
}; |
| 872 |
|
| 873 |
pwm: pwm@109b0000 { |
| 874 |
compatible = "samsung,exynosautov920-pwm", |
| 875 |
"samsung,exynos4210-pwm"; |
| 876 |
reg = <0x109b0000 0x100>; |
| 877 |
samsung,pwm-outputs = <0>, <1>, <2>, <3>; |
| 878 |
#pwm-cells = <3>; |
| 879 |
clocks = <&xtcxo>; |
| 880 |
clock-names = "timers"; |
| 881 |
status = "disabled"; |
| 882 |
}; |
| 883 |
|
| 884 |
cmu_peric1: clock-controller@10c00000 { |
| 885 |
compatible = "samsung,exynosautov920-cmu-peric1"; |
| 886 |
reg = <0x10c00000 0x8000>; |
| 887 |
#clock-cells = <1>; |
| 888 |
|
| 889 |
clocks = <&xtcxo>, |
| 890 |
<&cmu_top DOUT_CLKCMU_PERIC1_NOC>, |
| 891 |
<&cmu_top DOUT_CLKCMU_PERIC1_IP>; |
| 892 |
clock-names = "oscclk", |
| 893 |
"noc", |
| 894 |
"ip"; |
| 895 |
}; |
| 896 |
|
| 897 |
syscon_peric1: syscon@10c20000 { |
| 898 |
compatible = "samsung,exynosautov920-peric1-sysreg", |
| 899 |
"syscon"; |
| 900 |
reg = <0x10c20000 0x2000>; |
| 901 |
}; |
| 902 |
|
| 903 |
pinctrl_peric1: pinctrl@10c30000 { |
| 904 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 905 |
reg = <0x10c30000 0x10000>; |
| 906 |
interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>; |
| 907 |
}; |
| 908 |
|
| 909 |
usi_9: usi@10c800c0 { |
| 910 |
compatible = "samsung,exynosautov920-usi", |
| 911 |
"samsung,exynos850-usi"; |
| 912 |
reg = <0x10c800c0 0x20>; |
| 913 |
samsung,sysreg = <&syscon_peric1 0x1000>; |
| 914 |
samsung,mode = <USI_V2_UART>; |
| 915 |
#address-cells = <1>; |
| 916 |
#size-cells = <1>; |
| 917 |
ranges; |
| 918 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 919 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>; |
| 920 |
clock-names = "pclk", "ipclk"; |
| 921 |
status = "disabled"; |
| 922 |
|
| 923 |
serial_9: serial@10c8000 { |
| 924 |
compatible = "samsung,exynosautov920-uart", |
| 925 |
"samsung,exynos850-uart"; |
| 926 |
reg = <0x10c80000 0xc0>; |
| 927 |
interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>; |
| 928 |
pinctrl-names = "default"; |
| 929 |
pinctrl-0 = <&uart9_bus>; |
| 930 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 931 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>; |
| 932 |
clock-names = "uart", "clk_uart_baud0"; |
| 933 |
samsung,uart-fifosize = <256>; |
| 934 |
status = "disabled"; |
| 935 |
}; |
| 936 |
|
| 937 |
spi_9: spi@10c80000 { |
| 938 |
compatible = "samsung,exynosautov920-spi", |
| 939 |
"samsung,exynos850-spi"; |
| 940 |
reg = <0x10c80000 0x30>; |
| 941 |
interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>; |
| 942 |
pinctrl-names = "default"; |
| 943 |
pinctrl-0 = <&spi9_bus &spi9_cs_func>; |
| 944 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 945 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>; |
| 946 |
clock-names = "spi", "spi_busclk0"; |
| 947 |
samsung,spi-src-clk = <0>; |
| 948 |
dmas = <&pdma1 1>, <&pdma1 0>; |
| 949 |
dma-names = "tx", "rx"; |
| 950 |
num-cs = <1>; |
| 951 |
#address-cells = <1>; |
| 952 |
#size-cells = <0>; |
| 953 |
fifo-depth = <256>; |
| 954 |
status = "disabled"; |
| 955 |
}; |
| 956 |
}; |
| 957 |
|
| 958 |
usi_10: usi@10ca00c0 { |
| 959 |
compatible = "samsung,exynosautov920-usi", |
| 960 |
"samsung,exynos850-usi"; |
| 961 |
reg = <0x10ca00c0 0x20>; |
| 962 |
samsung,sysreg = <&syscon_peric1 0x1008>; |
| 963 |
samsung,mode = <USI_V2_UART>; |
| 964 |
#address-cells = <1>; |
| 965 |
#size-cells = <1>; |
| 966 |
ranges; |
| 967 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 968 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>; |
| 969 |
clock-names = "pclk", "ipclk"; |
| 970 |
status = "disabled"; |
| 971 |
|
| 972 |
serial_10: serial@10ca0000 { |
| 973 |
compatible = "samsung,exynosautov920-uart", |
| 974 |
"samsung,exynos850-uart"; |
| 975 |
reg = <0x10ca0000 0xc0>; |
| 976 |
interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>; |
| 977 |
pinctrl-names = "default"; |
| 978 |
pinctrl-0 = <&uart10_bus>; |
| 979 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 980 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>; |
| 981 |
clock-names = "uart", "clk_uart_baud0"; |
| 982 |
samsung,uart-fifosize = <64>; |
| 983 |
status = "disabled"; |
| 984 |
}; |
| 985 |
|
| 986 |
spi_10: spi@10ca0000 { |
| 987 |
compatible = "samsung,exynosautov920-spi", |
| 988 |
"samsung,exynos850-spi"; |
| 989 |
reg = <0x10ca0000 0x30>; |
| 990 |
interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>; |
| 991 |
pinctrl-names = "default"; |
| 992 |
pinctrl-0 = <&spi10_bus &spi10_cs_func>; |
| 993 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 994 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>; |
| 995 |
clock-names = "spi", "spi_busclk0"; |
| 996 |
samsung,spi-src-clk = <0>; |
| 997 |
dmas = <&pdma1 3>, <&pdma1 2>; |
| 998 |
dma-names = "tx", "rx"; |
| 999 |
num-cs = <1>; |
| 1000 |
#address-cells = <1>; |
| 1001 |
#size-cells = <0>; |
| 1002 |
fifo-depth = <64>; |
| 1003 |
status = "disabled"; |
| 1004 |
}; |
| 1005 |
}; |
| 1006 |
|
| 1007 |
usi_11: usi@10cc00c0 { |
| 1008 |
compatible = "samsung,exynosautov920-usi", |
| 1009 |
"samsung,exynos850-usi"; |
| 1010 |
reg = <0x10cc00c0 0x20>; |
| 1011 |
samsung,sysreg = <&syscon_peric1 0x1010>; |
| 1012 |
samsung,mode = <USI_V2_UART>; |
| 1013 |
#address-cells = <1>; |
| 1014 |
#size-cells = <1>; |
| 1015 |
ranges; |
| 1016 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1017 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>; |
| 1018 |
clock-names = "pclk", "ipclk"; |
| 1019 |
status = "disabled"; |
| 1020 |
|
| 1021 |
serial_11: serial@10cc0000 { |
| 1022 |
compatible = "samsung,exynosautov920-uart", |
| 1023 |
"samsung,exynos850-uart"; |
| 1024 |
reg = <0x10cc0000 0xc0>; |
| 1025 |
interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>; |
| 1026 |
pinctrl-names = "default"; |
| 1027 |
pinctrl-0 = <&uart11_bus>; |
| 1028 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1029 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>; |
| 1030 |
clock-names = "uart", "clk_uart_baud0"; |
| 1031 |
samsung,uart-fifosize = <64>; |
| 1032 |
status = "disabled"; |
| 1033 |
}; |
| 1034 |
|
| 1035 |
spi_11: spi@10cc0000 { |
| 1036 |
compatible = "samsung,exynosautov920-spi", |
| 1037 |
"samsung,exynos850-spi"; |
| 1038 |
reg = <0x10cc0000 0x30>; |
| 1039 |
interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>; |
| 1040 |
pinctrl-names = "default"; |
| 1041 |
pinctrl-0 = <&spi11_bus &spi11_cs_func>; |
| 1042 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1043 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>; |
| 1044 |
clock-names = "spi", "spi_busclk0"; |
| 1045 |
samsung,spi-src-clk = <0>; |
| 1046 |
dmas = <&pdma1 5>, <&pdma1 4>; |
| 1047 |
dma-names = "tx", "rx"; |
| 1048 |
num-cs = <1>; |
| 1049 |
#address-cells = <1>; |
| 1050 |
#size-cells = <0>; |
| 1051 |
fifo-depth = <64>; |
| 1052 |
status = "disabled"; |
| 1053 |
}; |
| 1054 |
}; |
| 1055 |
|
| 1056 |
usi_12: usi@10ce00c0 { |
| 1057 |
compatible = "samsung,exynosautov920-usi", |
| 1058 |
"samsung,exynos850-usi"; |
| 1059 |
reg = <0x10ce00c0 0x20>; |
| 1060 |
samsung,sysreg = <&syscon_peric1 0x1018>; |
| 1061 |
samsung,mode = <USI_V2_UART>; |
| 1062 |
#address-cells = <1>; |
| 1063 |
#size-cells = <1>; |
| 1064 |
ranges; |
| 1065 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1066 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>; |
| 1067 |
clock-names = "pclk", "ipclk"; |
| 1068 |
status = "disabled"; |
| 1069 |
|
| 1070 |
serial_12: serial@10ce0000 { |
| 1071 |
compatible = "samsung,exynosautov920-uart", |
| 1072 |
"samsung,exynos850-uart"; |
| 1073 |
reg = <0x10ce0000 0xc0>; |
| 1074 |
interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>; |
| 1075 |
pinctrl-names = "default"; |
| 1076 |
pinctrl-0 = <&uart12_bus>; |
| 1077 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1078 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>; |
| 1079 |
clock-names = "uart", "clk_uart_baud0"; |
| 1080 |
samsung,uart-fifosize = <64>; |
| 1081 |
status = "disabled"; |
| 1082 |
}; |
| 1083 |
|
| 1084 |
spi_12: spi@10ce0000 { |
| 1085 |
compatible = "samsung,exynosautov920-spi", |
| 1086 |
"samsung,exynos850-spi"; |
| 1087 |
reg = <0x10ce0000 0x30>; |
| 1088 |
interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>; |
| 1089 |
pinctrl-names = "default"; |
| 1090 |
pinctrl-0 = <&spi12_bus &spi12_cs_func>; |
| 1091 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1092 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>; |
| 1093 |
clock-names = "spi", "spi_busclk0"; |
| 1094 |
samsung,spi-src-clk = <0>; |
| 1095 |
dmas = <&pdma1 7>, <&pdma1 6>; |
| 1096 |
dma-names = "tx", "rx"; |
| 1097 |
num-cs = <1>; |
| 1098 |
#address-cells = <1>; |
| 1099 |
#size-cells = <0>; |
| 1100 |
fifo-depth = <64>; |
| 1101 |
status = "disabled"; |
| 1102 |
}; |
| 1103 |
}; |
| 1104 |
|
| 1105 |
usi_13: usi@10d000c0 { |
| 1106 |
compatible = "samsung,exynosautov920-usi", |
| 1107 |
"samsung,exynos850-usi"; |
| 1108 |
reg = <0x10d000c0 0x20>; |
| 1109 |
samsung,sysreg = <&syscon_peric1 0x1020>; |
| 1110 |
samsung,mode = <USI_V2_UART>; |
| 1111 |
#address-cells = <1>; |
| 1112 |
#size-cells = <1>; |
| 1113 |
ranges; |
| 1114 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1115 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>; |
| 1116 |
clock-names = "pclk", "ipclk"; |
| 1117 |
status = "disabled"; |
| 1118 |
|
| 1119 |
serial_13: serial@10d00000 { |
| 1120 |
compatible = "samsung,exynosautov920-uart", |
| 1121 |
"samsung,exynos850-uart"; |
| 1122 |
reg = <0x10d00000 0xc0>; |
| 1123 |
interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>; |
| 1124 |
pinctrl-names = "default"; |
| 1125 |
pinctrl-0 = <&uart13_bus>; |
| 1126 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1127 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>; |
| 1128 |
clock-names = "uart", "clk_uart_baud0"; |
| 1129 |
samsung,uart-fifosize = <64>; |
| 1130 |
status = "disabled"; |
| 1131 |
}; |
| 1132 |
|
| 1133 |
spi_13: spi@10d00000 { |
| 1134 |
compatible = "samsung,exynosautov920-spi", |
| 1135 |
"samsung,exynos850-spi"; |
| 1136 |
reg = <0x10d00000 0x30>; |
| 1137 |
interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>; |
| 1138 |
pinctrl-names = "default"; |
| 1139 |
pinctrl-0 = <&spi13_bus &spi13_cs_func>; |
| 1140 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1141 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>; |
| 1142 |
clock-names = "spi", "spi_busclk0"; |
| 1143 |
samsung,spi-src-clk = <0>; |
| 1144 |
dmas = <&pdma1 9>, <&pdma1 8>; |
| 1145 |
dma-names = "tx", "rx"; |
| 1146 |
num-cs = <1>; |
| 1147 |
#address-cells = <1>; |
| 1148 |
#size-cells = <0>; |
| 1149 |
fifo-depth = <64>; |
| 1150 |
status = "disabled"; |
| 1151 |
}; |
| 1152 |
}; |
| 1153 |
|
| 1154 |
usi_14: usi@10d200c0 { |
| 1155 |
compatible = "samsung,exynosautov920-usi", |
| 1156 |
"samsung,exynos850-usi"; |
| 1157 |
reg = <0x10d200c0 0x20>; |
| 1158 |
samsung,sysreg = <&syscon_peric1 0x1028>; |
| 1159 |
samsung,mode = <USI_V2_UART>; |
| 1160 |
#address-cells = <1>; |
| 1161 |
#size-cells = <1>; |
| 1162 |
ranges; |
| 1163 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1164 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>; |
| 1165 |
clock-names = "pclk", "ipclk"; |
| 1166 |
status = "disabled"; |
| 1167 |
|
| 1168 |
serial_14: serial@10d20000 { |
| 1169 |
compatible = "samsung,exynosautov920-uart", |
| 1170 |
"samsung,exynos850-uart"; |
| 1171 |
reg = <0x10d20000 0xc0>; |
| 1172 |
interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>; |
| 1173 |
pinctrl-names = "default"; |
| 1174 |
pinctrl-0 = <&uart14_bus>; |
| 1175 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1176 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>; |
| 1177 |
clock-names = "uart", "clk_uart_baud0"; |
| 1178 |
samsung,uart-fifosize = <64>; |
| 1179 |
status = "disabled"; |
| 1180 |
}; |
| 1181 |
|
| 1182 |
spi_14: spi@10d20000 { |
| 1183 |
compatible = "samsung,exynosautov920-spi", |
| 1184 |
"samsung,exynos850-spi"; |
| 1185 |
reg = <0x10d20000 0x30>; |
| 1186 |
interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>; |
| 1187 |
pinctrl-names = "default"; |
| 1188 |
pinctrl-0 = <&spi14_bus &spi14_cs_func>; |
| 1189 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1190 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>; |
| 1191 |
clock-names = "spi", "spi_busclk0"; |
| 1192 |
samsung,spi-src-clk = <0>; |
| 1193 |
dmas = <&pdma1 11>, <&pdma1 10>; |
| 1194 |
dma-names = "tx", "rx"; |
| 1195 |
num-cs = <1>; |
| 1196 |
#address-cells = <1>; |
| 1197 |
#size-cells = <0>; |
| 1198 |
fifo-depth = <64>; |
| 1199 |
status = "disabled"; |
| 1200 |
}; |
| 1201 |
}; |
| 1202 |
|
| 1203 |
usi_15: usi@10d400c0 { |
| 1204 |
compatible = "samsung,exynosautov920-usi", |
| 1205 |
"samsung,exynos850-usi"; |
| 1206 |
reg = <0x10d400c0 0x20>; |
| 1207 |
samsung,sysreg = <&syscon_peric1 0x1030>; |
| 1208 |
samsung,mode = <USI_V2_UART>; |
| 1209 |
#address-cells = <1>; |
| 1210 |
#size-cells = <1>; |
| 1211 |
ranges; |
| 1212 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1213 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>; |
| 1214 |
clock-names = "pclk", "ipclk"; |
| 1215 |
status = "disabled"; |
| 1216 |
|
| 1217 |
serial_15: serial@10d40000 { |
| 1218 |
compatible = "samsung,exynosautov920-uart", |
| 1219 |
"samsung,exynos850-uart"; |
| 1220 |
reg = <0x10d40000 0xc0>; |
| 1221 |
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; |
| 1222 |
pinctrl-names = "default"; |
| 1223 |
pinctrl-0 = <&uart15_bus>; |
| 1224 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1225 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>; |
| 1226 |
clock-names = "uart", "clk_uart_baud0"; |
| 1227 |
samsung,uart-fifosize = <64>; |
| 1228 |
status = "disabled"; |
| 1229 |
}; |
| 1230 |
|
| 1231 |
spi_15: spi@10d40000 { |
| 1232 |
compatible = "samsung,exynosautov920-spi", |
| 1233 |
"samsung,exynos850-spi"; |
| 1234 |
reg = <0x10d40000 0x30>; |
| 1235 |
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; |
| 1236 |
pinctrl-names = "default"; |
| 1237 |
pinctrl-0 = <&spi15_bus &spi15_cs_func>; |
| 1238 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1239 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>; |
| 1240 |
clock-names = "spi", "spi_busclk0"; |
| 1241 |
samsung,spi-src-clk = <0>; |
| 1242 |
dmas = <&pdma1 13>, <&pdma1 12>; |
| 1243 |
dma-names = "tx", "rx"; |
| 1244 |
num-cs = <1>; |
| 1245 |
#address-cells = <1>; |
| 1246 |
#size-cells = <0>; |
| 1247 |
fifo-depth = <64>; |
| 1248 |
status = "disabled"; |
| 1249 |
}; |
| 1250 |
}; |
| 1251 |
|
| 1252 |
usi_16: usi@10d600c0 { |
| 1253 |
compatible = "samsung,exynosautov920-usi", |
| 1254 |
"samsung,exynos850-usi"; |
| 1255 |
reg = <0x10d600c0 0x20>; |
| 1256 |
samsung,sysreg = <&syscon_peric1 0x1038>; |
| 1257 |
samsung,mode = <USI_V2_UART>; |
| 1258 |
#address-cells = <1>; |
| 1259 |
#size-cells = <1>; |
| 1260 |
ranges; |
| 1261 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1262 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>; |
| 1263 |
clock-names = "pclk", "ipclk"; |
| 1264 |
status = "disabled"; |
| 1265 |
|
| 1266 |
serial_16: serial@10d60000 { |
| 1267 |
compatible = "samsung,exynosautov920-uart", |
| 1268 |
"samsung,exynos850-uart"; |
| 1269 |
reg = <0x10d60000 0xc0>; |
| 1270 |
interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>; |
| 1271 |
pinctrl-names = "default"; |
| 1272 |
pinctrl-0 = <&uart16_bus>; |
| 1273 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1274 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>; |
| 1275 |
clock-names = "uart", "clk_uart_baud0"; |
| 1276 |
samsung,uart-fifosize = <64>; |
| 1277 |
status = "disabled"; |
| 1278 |
}; |
| 1279 |
|
| 1280 |
spi_16: spi@10d60000 { |
| 1281 |
compatible = "samsung,exynosautov920-spi", |
| 1282 |
"samsung,exynos850-spi"; |
| 1283 |
reg = <0x10d60000 0x30>; |
| 1284 |
interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>; |
| 1285 |
pinctrl-names = "default"; |
| 1286 |
pinctrl-0 = <&spi16_bus &spi16_cs_func>; |
| 1287 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1288 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>; |
| 1289 |
clock-names = "spi", "spi_busclk0"; |
| 1290 |
samsung,spi-src-clk = <0>; |
| 1291 |
dmas = <&pdma1 15>, <&pdma1 14>; |
| 1292 |
dma-names = "tx", "rx"; |
| 1293 |
num-cs = <1>; |
| 1294 |
#address-cells = <1>; |
| 1295 |
#size-cells = <0>; |
| 1296 |
fifo-depth = <64>; |
| 1297 |
status = "disabled"; |
| 1298 |
}; |
| 1299 |
}; |
| 1300 |
|
| 1301 |
usi_17: usi@10d800c0 { |
| 1302 |
compatible = "samsung,exynosautov920-usi", |
| 1303 |
"samsung,exynos850-usi"; |
| 1304 |
reg = <0x10d800c0 0x20>; |
| 1305 |
samsung,sysreg = <&syscon_peric1 0x1040>; |
| 1306 |
samsung,mode = <USI_V2_UART>; |
| 1307 |
#address-cells = <1>; |
| 1308 |
#size-cells = <1>; |
| 1309 |
ranges; |
| 1310 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1311 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>; |
| 1312 |
clock-names = "pclk", "ipclk"; |
| 1313 |
status = "disabled"; |
| 1314 |
|
| 1315 |
serial_17: serial@10d80000 { |
| 1316 |
compatible = "samsung,exynosautov920-uart", |
| 1317 |
"samsung,exynos850-uart"; |
| 1318 |
reg = <0x10d80000 0xc0>; |
| 1319 |
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; |
| 1320 |
pinctrl-names = "default"; |
| 1321 |
pinctrl-0 = <&uart17_bus>; |
| 1322 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1323 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>; |
| 1324 |
clock-names = "uart", "clk_uart_baud0"; |
| 1325 |
samsung,uart-fifosize = <64>; |
| 1326 |
status = "disabled"; |
| 1327 |
}; |
| 1328 |
|
| 1329 |
spi_17: spi@10d80000 { |
| 1330 |
compatible = "samsung,exynosautov920-spi", |
| 1331 |
"samsung,exynos850-spi"; |
| 1332 |
reg = <0x10d80000 0x30>; |
| 1333 |
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; |
| 1334 |
pinctrl-names = "default"; |
| 1335 |
pinctrl-0 = <&spi17_bus &spi17_cs_func>; |
| 1336 |
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, |
| 1337 |
<&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>; |
| 1338 |
clock-names = "spi", "spi_busclk0"; |
| 1339 |
samsung,spi-src-clk = <0>; |
| 1340 |
dmas = <&pdma1 17>, <&pdma1 16>; |
| 1341 |
dma-names = "tx", "rx"; |
| 1342 |
num-cs = <1>; |
| 1343 |
#address-cells = <1>; |
| 1344 |
#size-cells = <0>; |
| 1345 |
fifo-depth = <64>; |
| 1346 |
status = "disabled"; |
| 1347 |
}; |
| 1348 |
}; |
| 1349 |
|
| 1350 |
cmu_top: clock-controller@11000000 { |
| 1351 |
compatible = "samsung,exynosautov920-cmu-top"; |
| 1352 |
reg = <0x11000000 0x8000>; |
| 1353 |
#clock-cells = <1>; |
| 1354 |
|
| 1355 |
clocks = <&xtcxo>; |
| 1356 |
clock-names = "oscclk"; |
| 1357 |
}; |
| 1358 |
|
| 1359 |
pinctrl_alive: pinctrl@11850000 { |
| 1360 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 1361 |
reg = <0x11850000 0x10000>; |
| 1362 |
|
| 1363 |
wakeup-interrupt-controller { |
| 1364 |
compatible = "samsung,exynosautov920-wakeup-eint"; |
| 1365 |
}; |
| 1366 |
}; |
| 1367 |
|
| 1368 |
pmu_system_controller: system-controller@11860000 { |
| 1369 |
compatible = "samsung,exynosautov920-pmu", |
| 1370 |
"samsung,exynos7-pmu","syscon"; |
| 1371 |
reg = <0x11860000 0x10000>; |
| 1372 |
}; |
| 1373 |
|
| 1374 |
cmu_hsi0: clock-controller@16000000 { |
| 1375 |
compatible = "samsung,exynosautov920-cmu-hsi0"; |
| 1376 |
reg = <0x16000000 0x8000>; |
| 1377 |
#clock-cells = <1>; |
| 1378 |
|
| 1379 |
clocks = <&xtcxo>, |
| 1380 |
<&cmu_top DOUT_CLKCMU_HSI0_NOC>; |
| 1381 |
clock-names = "oscclk", |
| 1382 |
"noc"; |
| 1383 |
}; |
| 1384 |
|
| 1385 |
pinctrl_hsi0: pinctrl@16040000 { |
| 1386 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 1387 |
reg = <0x16040000 0x10000>; |
| 1388 |
interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; |
| 1389 |
}; |
| 1390 |
|
| 1391 |
cmu_hsi1: clock-controller@16400000 { |
| 1392 |
compatible = "samsung,exynosautov920-cmu-hsi1"; |
| 1393 |
reg = <0x16400000 0x8000>; |
| 1394 |
#clock-cells = <1>; |
| 1395 |
|
| 1396 |
clocks = <&xtcxo>, |
| 1397 |
<&cmu_top DOUT_CLKCMU_HSI1_NOC>, |
| 1398 |
<&cmu_top DOUT_CLKCMU_HSI1_USBDRD>, |
| 1399 |
<&cmu_top DOUT_CLKCMU_HSI1_MMC_CARD>; |
| 1400 |
clock-names = "oscclk", |
| 1401 |
"noc", |
| 1402 |
"usbdrd", |
| 1403 |
"mmc_card"; |
| 1404 |
}; |
| 1405 |
|
| 1406 |
pinctrl_hsi1: pinctrl@16450000 { |
| 1407 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 1408 |
reg = <0x16450000 0x10000>; |
| 1409 |
interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; |
| 1410 |
}; |
| 1411 |
|
| 1412 |
cmu_hsi2: clock-controller@16b00000 { |
| 1413 |
compatible = "samsung,exynosautov920-cmu-hsi2"; |
| 1414 |
reg = <0x16b00000 0x8000>; |
| 1415 |
#clock-cells = <1>; |
| 1416 |
|
| 1417 |
clocks = <&xtcxo>, |
| 1418 |
<&cmu_top DOUT_CLKCMU_HSI2_NOC>, |
| 1419 |
<&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>, |
| 1420 |
<&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>, |
| 1421 |
<&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>; |
| 1422 |
clock-names = "oscclk", |
| 1423 |
"noc", |
| 1424 |
"ufs", |
| 1425 |
"embd", |
| 1426 |
"ethernet"; |
| 1427 |
}; |
| 1428 |
|
| 1429 |
pinctrl_hsi2: pinctrl@16c10000 { |
| 1430 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 1431 |
reg = <0x16c10000 0x10000>; |
| 1432 |
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| 1433 |
}; |
| 1434 |
|
| 1435 |
pinctrl_hsi2ufs: pinctrl@16d20000 { |
| 1436 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 1437 |
reg = <0x16d20000 0x10000>; |
| 1438 |
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| 1439 |
}; |
| 1440 |
|
| 1441 |
ufs_0_phy: phy@16e04000 { |
| 1442 |
compatible = "samsung,exynosautov920-ufs-phy"; |
| 1443 |
reg = <0x16e04000 0x4000>; |
| 1444 |
reg-names = "phy-pma"; |
| 1445 |
clocks = <&xtcxo>; |
| 1446 |
clock-names = "ref_clk"; |
| 1447 |
samsung,pmu-syscon = <&pmu_system_controller>; |
| 1448 |
#phy-cells = <0>; |
| 1449 |
status = "disabled"; |
| 1450 |
}; |
| 1451 |
|
| 1452 |
cmu_mfc: clock-controller@19c00000 { |
| 1453 |
compatible = "samsung,exynosautov920-cmu-mfc"; |
| 1454 |
reg = <0x19c00000 0x8000>; |
| 1455 |
#clock-cells = <1>; |
| 1456 |
|
| 1457 |
clocks = <&xtcxo>, |
| 1458 |
<&cmu_top DOUT_CLKCMU_MFC_MFC>, |
| 1459 |
<&cmu_top DOUT_CLKCMU_MFC_WFD>; |
| 1460 |
clock-names = "oscclk", |
| 1461 |
"mfc", |
| 1462 |
"wfd"; |
| 1463 |
}; |
| 1464 |
|
| 1465 |
cmu_mfd: clock-controller@19e00000 { |
| 1466 |
compatible = "samsung,exynosautov920-cmu-mfd"; |
| 1467 |
reg = <0x19e00000 0x8000>; |
| 1468 |
#clock-cells = <1>; |
| 1469 |
|
| 1470 |
clocks = <&xtcxo>, |
| 1471 |
<&cmu_top DOUT_CLKCMU_MFD_NOC>; |
| 1472 |
clock-names = "oscclk", |
| 1473 |
"noc"; |
| 1474 |
}; |
| 1475 |
|
| 1476 |
pinctrl_aud: pinctrl@1a460000 { |
| 1477 |
compatible = "samsung,exynosautov920-pinctrl"; |
| 1478 |
reg = <0x1a460000 0x10000>; |
| 1479 |
}; |
| 1480 |
|
| 1481 |
cmu_m2m: clock-controller@1a800000 { |
| 1482 |
compatible = "samsung,exynosautov920-cmu-m2m"; |
| 1483 |
reg = <0x1a800000 0x8000>; |
| 1484 |
#clock-cells = <1>; |
| 1485 |
|
| 1486 |
clocks = <&xtcxo>, |
| 1487 |
<&cmu_top DOUT_CLKCMU_M2M_NOC>, |
| 1488 |
<&cmu_top DOUT_CLKCMU_M2M_JPEG>; |
| 1489 |
clock-names = "oscclk", |
| 1490 |
"noc", |
| 1491 |
"jpeg"; |
| 1492 |
}; |
| 1493 |
|
| 1494 |
cmu_cpucl0: clock-controller@1ec00000 { |
| 1495 |
compatible = "samsung,exynosautov920-cmu-cpucl0"; |
| 1496 |
reg = <0x1ec00000 0x8000>; |
| 1497 |
#clock-cells = <1>; |
| 1498 |
|
| 1499 |
clocks = <&xtcxo>, |
| 1500 |
<&cmu_top DOUT_CLKCMU_CPUCL0_SWITCH>, |
| 1501 |
<&cmu_top DOUT_CLKCMU_CPUCL0_CLUSTER>, |
| 1502 |
<&cmu_top DOUT_CLKCMU_CPUCL0_DBG>; |
| 1503 |
clock-names = "oscclk", |
| 1504 |
"switch", |
| 1505 |
"cluster", |
| 1506 |
"dbg"; |
| 1507 |
}; |
| 1508 |
|
| 1509 |
cmu_cpucl1: clock-controller@1ed00000 { |
| 1510 |
compatible = "samsung,exynosautov920-cmu-cpucl1"; |
| 1511 |
reg = <0x1ed00000 0x8000>; |
| 1512 |
#clock-cells = <1>; |
| 1513 |
|
| 1514 |
clocks = <&xtcxo>, |
| 1515 |
<&cmu_top DOUT_CLKCMU_CPUCL1_SWITCH>, |
| 1516 |
<&cmu_top DOUT_CLKCMU_CPUCL1_CLUSTER>; |
| 1517 |
clock-names = "oscclk", |
| 1518 |
"switch", |
| 1519 |
"cluster"; |
| 1520 |
}; |
| 1521 |
|
| 1522 |
cmu_cpucl2: clock-controller@1ee00000 { |
| 1523 |
compatible = "samsung,exynosautov920-cmu-cpucl2"; |
| 1524 |
reg = <0x1ee00000 0x8000>; |
| 1525 |
#clock-cells = <1>; |
| 1526 |
|
| 1527 |
clocks = <&xtcxo>, |
| 1528 |
<&cmu_top DOUT_CLKCMU_CPUCL2_SWITCH>, |
| 1529 |
<&cmu_top DOUT_CLKCMU_CPUCL2_CLUSTER>; |
| 1530 |
clock-names = "oscclk", |
| 1531 |
"switch", |
| 1532 |
"cluster"; |
| 1533 |
}; |
| 1534 |
}; |
| 1535 |
|
| 1536 |
timer { |
| 1537 |
compatible = "arm,armv8-timer"; |
| 1538 |
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| 1539 |
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| 1540 |
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| 1541 |
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, |
| 1542 |
<GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; |
| 1543 |
}; |
| 1544 |
}; |
| 1545 |
|
| 1546 |
#include "exynosautov920-pinctrl.dtsi" |