| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung Exynos7 Espresso board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
#include "exynos7.dtsi" |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
#include <dt-bindings/clock/samsung,s2mps11.h> |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Samsung Exynos7 Espresso board based on Exynos7"; |
| 17 |
compatible = "samsung,exynos7-espresso", "samsung,exynos7"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
mmc0 = &mmc_0; |
| 21 |
mmc2 = &mmc_2; |
| 22 |
serial0 = &serial_2; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
stdout-path = &serial_2; |
| 27 |
}; |
| 28 |
|
| 29 |
memory@40000000 { |
| 30 |
device_type = "memory"; |
| 31 |
reg = <0x0 0x40000000 0x0 0xc0000000>; |
| 32 |
}; |
| 33 |
|
| 34 |
usb30_vbus_reg: regulator-usb30 { |
| 35 |
compatible = "regulator-fixed"; |
| 36 |
regulator-name = "VBUS_5V"; |
| 37 |
regulator-min-microvolt = <5000000>; |
| 38 |
regulator-max-microvolt = <5000000>; |
| 39 |
gpio = <&gph1 1 GPIO_ACTIVE_HIGH>; |
| 40 |
pinctrl-names = "default"; |
| 41 |
pinctrl-0 = <&usb30_vbus_en>; |
| 42 |
enable-active-high; |
| 43 |
}; |
| 44 |
|
| 45 |
usb3drd_boost_5v: regulator-usb3drd-boost { |
| 46 |
compatible = "regulator-fixed"; |
| 47 |
regulator-name = "VUSB_VBUS_5V"; |
| 48 |
regulator-min-microvolt = <5000000>; |
| 49 |
regulator-max-microvolt = <5000000>; |
| 50 |
gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>; |
| 51 |
pinctrl-names = "default"; |
| 52 |
pinctrl-0 = <&usb3drd_boost_en>; |
| 53 |
enable-active-high; |
| 54 |
}; |
| 55 |
|
| 56 |
}; |
| 57 |
|
| 58 |
&fin_pll { |
| 59 |
clock-frequency = <24000000>; |
| 60 |
}; |
| 61 |
|
| 62 |
&gpu { |
| 63 |
mali-supply = <&buck6_reg>; |
| 64 |
}; |
| 65 |
|
| 66 |
&serial_2 { |
| 67 |
status = "okay"; |
| 68 |
}; |
| 69 |
|
| 70 |
&rtc { |
| 71 |
status = "okay"; |
| 72 |
clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>; |
| 73 |
clock-names = "rtc", "rtc_src"; |
| 74 |
}; |
| 75 |
|
| 76 |
&watchdog { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
&adc { |
| 81 |
vdd-supply = <&ldo3_reg>; |
| 82 |
status = "okay"; |
| 83 |
}; |
| 84 |
|
| 85 |
&hsi2c_4 { |
| 86 |
status = "okay"; |
| 87 |
|
| 88 |
pmic@66 { |
| 89 |
compatible = "samsung,s2mps15-pmic"; |
| 90 |
reg = <0x66>; |
| 91 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 92 |
interrupt-parent = <&gpa0>; |
| 93 |
pinctrl-names = "default"; |
| 94 |
pinctrl-0 = <&pmic_irq>; |
| 95 |
wakeup-source; |
| 96 |
|
| 97 |
s2mps15_osc: clocks { |
| 98 |
compatible = "samsung,s2mps13-clk"; |
| 99 |
#clock-cells = <1>; |
| 100 |
clock-output-names = "s2mps13_ap", "s2mps13_cp", |
| 101 |
"s2mps13_bt"; |
| 102 |
}; |
| 103 |
|
| 104 |
regulators { |
| 105 |
ldo1_reg: LDO1 { |
| 106 |
regulator-name = "vdd_ldo1"; |
| 107 |
regulator-min-microvolt = <500000>; |
| 108 |
regulator-max-microvolt = <900000>; |
| 109 |
regulator-always-on; |
| 110 |
regulator-enable-ramp-delay = <125>; |
| 111 |
}; |
| 112 |
|
| 113 |
ldo2_reg: LDO2 { |
| 114 |
regulator-name = "vqmmc-sdcard"; |
| 115 |
regulator-min-microvolt = <1620000>; |
| 116 |
regulator-max-microvolt = <3300000>; |
| 117 |
regulator-always-on; |
| 118 |
regulator-enable-ramp-delay = <125>; |
| 119 |
}; |
| 120 |
|
| 121 |
ldo3_reg: LDO3 { |
| 122 |
regulator-name = "vdd_ldo3"; |
| 123 |
regulator-min-microvolt = <1620000>; |
| 124 |
regulator-max-microvolt = <1980000>; |
| 125 |
regulator-always-on; |
| 126 |
regulator-boot-on; |
| 127 |
regulator-enable-ramp-delay = <125>; |
| 128 |
}; |
| 129 |
|
| 130 |
ldo4_reg: LDO4 { |
| 131 |
regulator-name = "vdd_ldo4"; |
| 132 |
regulator-min-microvolt = <800000>; |
| 133 |
regulator-max-microvolt = <1110000>; |
| 134 |
regulator-always-on; |
| 135 |
regulator-enable-ramp-delay = <125>; |
| 136 |
}; |
| 137 |
|
| 138 |
ldo5_reg: LDO5 { |
| 139 |
regulator-name = "vdd_ldo5"; |
| 140 |
regulator-min-microvolt = <1620000>; |
| 141 |
regulator-max-microvolt = <1980000>; |
| 142 |
regulator-always-on; |
| 143 |
regulator-enable-ramp-delay = <125>; |
| 144 |
}; |
| 145 |
|
| 146 |
ldo6_reg: LDO6 { |
| 147 |
regulator-name = "vdd_ldo6"; |
| 148 |
regulator-min-microvolt = <2250000>; |
| 149 |
regulator-max-microvolt = <3300000>; |
| 150 |
regulator-enable-ramp-delay = <125>; |
| 151 |
}; |
| 152 |
|
| 153 |
ldo7_reg: LDO7 { |
| 154 |
regulator-name = "vdd_ldo7"; |
| 155 |
regulator-min-microvolt = <700000>; |
| 156 |
regulator-max-microvolt = <1150000>; |
| 157 |
regulator-enable-ramp-delay = <125>; |
| 158 |
regulator-always-on; |
| 159 |
}; |
| 160 |
|
| 161 |
ldo8_reg: LDO8 { |
| 162 |
regulator-name = "vdd_ldo8"; |
| 163 |
regulator-min-microvolt = <700000>; |
| 164 |
regulator-max-microvolt = <1000000>; |
| 165 |
regulator-enable-ramp-delay = <125>; |
| 166 |
}; |
| 167 |
|
| 168 |
ldo9_reg: LDO9 { |
| 169 |
regulator-name = "vdd_ldo9"; |
| 170 |
regulator-min-microvolt = <700000>; |
| 171 |
regulator-max-microvolt = <1000000>; |
| 172 |
regulator-enable-ramp-delay = <125>; |
| 173 |
}; |
| 174 |
|
| 175 |
ldo10_reg: LDO10 { |
| 176 |
regulator-name = "vdd_ldo10"; |
| 177 |
regulator-min-microvolt = <700000>; |
| 178 |
regulator-max-microvolt = <1000000>; |
| 179 |
regulator-enable-ramp-delay = <125>; |
| 180 |
}; |
| 181 |
|
| 182 |
ldo11_reg: LDO11 { |
| 183 |
regulator-name = "vdd_ldo11"; |
| 184 |
regulator-min-microvolt = <1000000>; |
| 185 |
regulator-max-microvolt = <1300000>; |
| 186 |
regulator-always-on; |
| 187 |
regulator-enable-ramp-delay = <125>; |
| 188 |
}; |
| 189 |
|
| 190 |
ldo12_reg: LDO12 { |
| 191 |
regulator-name = "vdd_ldo12"; |
| 192 |
regulator-min-microvolt = <1000000>; |
| 193 |
regulator-max-microvolt = <1300000>; |
| 194 |
regulator-enable-ramp-delay = <125>; |
| 195 |
regulator-always-on; |
| 196 |
}; |
| 197 |
|
| 198 |
ldo13_reg: LDO13 { |
| 199 |
regulator-name = "vdd_ldo13"; |
| 200 |
regulator-min-microvolt = <1000000>; |
| 201 |
regulator-max-microvolt = <1300000>; |
| 202 |
regulator-always-on; |
| 203 |
regulator-enable-ramp-delay = <125>; |
| 204 |
}; |
| 205 |
|
| 206 |
ldo14_reg: LDO14 { |
| 207 |
regulator-name = "vdd_ldo14"; |
| 208 |
regulator-min-microvolt = <1800000>; |
| 209 |
regulator-max-microvolt = <3375000>; |
| 210 |
regulator-enable-ramp-delay = <125>; |
| 211 |
}; |
| 212 |
|
| 213 |
ldo17_reg: LDO17 { |
| 214 |
regulator-name = "vmmc-sdcard"; |
| 215 |
regulator-min-microvolt = <1800000>; |
| 216 |
regulator-max-microvolt = <3375000>; |
| 217 |
regulator-enable-ramp-delay = <125>; |
| 218 |
}; |
| 219 |
|
| 220 |
ldo18_reg: LDO18 { |
| 221 |
regulator-name = "vdd_ldo18"; |
| 222 |
regulator-min-microvolt = <1500000>; |
| 223 |
regulator-max-microvolt = <2275000>; |
| 224 |
regulator-enable-ramp-delay = <125>; |
| 225 |
}; |
| 226 |
|
| 227 |
ldo19_reg: LDO19 { |
| 228 |
regulator-name = "vdd_ldo19"; |
| 229 |
regulator-min-microvolt = <1800000>; |
| 230 |
regulator-max-microvolt = <3375000>; |
| 231 |
regulator-enable-ramp-delay = <125>; |
| 232 |
}; |
| 233 |
|
| 234 |
ldo21_reg: LDO21 { |
| 235 |
regulator-name = "vdd_ldo21"; |
| 236 |
regulator-min-microvolt = <1800000>; |
| 237 |
regulator-max-microvolt = <3375000>; |
| 238 |
regulator-enable-ramp-delay = <125>; |
| 239 |
}; |
| 240 |
|
| 241 |
ldo23_reg: LDO23 { |
| 242 |
regulator-name = "vdd_ldo23"; |
| 243 |
regulator-min-microvolt = <1500000>; |
| 244 |
regulator-max-microvolt = <2275000>; |
| 245 |
regulator-enable-ramp-delay = <125>; |
| 246 |
}; |
| 247 |
|
| 248 |
ldo25_reg: LDO25 { |
| 249 |
regulator-name = "vdd_ldo25"; |
| 250 |
regulator-min-microvolt = <1800000>; |
| 251 |
regulator-max-microvolt = <3375000>; |
| 252 |
regulator-enable-ramp-delay = <125>; |
| 253 |
}; |
| 254 |
|
| 255 |
ldo26_reg: LDO26 { |
| 256 |
regulator-name = "vdd_ldo26"; |
| 257 |
regulator-min-microvolt = <700000>; |
| 258 |
regulator-max-microvolt = <1470000>; |
| 259 |
regulator-enable-ramp-delay = <125>; |
| 260 |
}; |
| 261 |
|
| 262 |
ldo27_reg: LDO27 { |
| 263 |
regulator-name = "vdd_ldo27"; |
| 264 |
regulator-min-microvolt = <1500000>; |
| 265 |
regulator-max-microvolt = <2275000>; |
| 266 |
regulator-enable-ramp-delay = <125>; |
| 267 |
}; |
| 268 |
|
| 269 |
buck1_reg: BUCK1 { |
| 270 |
regulator-name = "vdd_mif"; |
| 271 |
regulator-min-microvolt = <500000>; |
| 272 |
regulator-max-microvolt = <1200000>; |
| 273 |
regulator-always-on; |
| 274 |
regulator-boot-on; |
| 275 |
regulator-ramp-delay = <25000>; |
| 276 |
regulator-enable-ramp-delay = <250>; |
| 277 |
}; |
| 278 |
|
| 279 |
buck2_reg: BUCK2 { |
| 280 |
regulator-name = "vdd_atlas"; |
| 281 |
regulator-min-microvolt = <500000>; |
| 282 |
regulator-max-microvolt = <1200000>; |
| 283 |
regulator-always-on; |
| 284 |
regulator-boot-on; |
| 285 |
regulator-ramp-delay = <12500>; |
| 286 |
regulator-enable-ramp-delay = <250>; |
| 287 |
}; |
| 288 |
|
| 289 |
buck4_reg: BUCK4 { |
| 290 |
regulator-name = "vdd_int"; |
| 291 |
regulator-min-microvolt = <500000>; |
| 292 |
regulator-max-microvolt = <1200000>; |
| 293 |
regulator-always-on; |
| 294 |
regulator-boot-on; |
| 295 |
regulator-ramp-delay = <12500>; |
| 296 |
regulator-enable-ramp-delay = <250>; |
| 297 |
}; |
| 298 |
|
| 299 |
buck5_reg: BUCK5 { |
| 300 |
regulator-name = "vdd_buck5"; |
| 301 |
regulator-min-microvolt = <500000>; |
| 302 |
regulator-max-microvolt = <1300000>; |
| 303 |
regulator-ramp-delay = <25000>; |
| 304 |
regulator-enable-ramp-delay = <250>; |
| 305 |
}; |
| 306 |
|
| 307 |
buck6_reg: BUCK6 { |
| 308 |
regulator-name = "vdd_g3d"; |
| 309 |
regulator-min-microvolt = <500000>; |
| 310 |
regulator-max-microvolt = <1400000>; |
| 311 |
regulator-ramp-delay = <12500>; |
| 312 |
regulator-enable-ramp-delay = <250>; |
| 313 |
}; |
| 314 |
|
| 315 |
buck7_reg: BUCK7 { |
| 316 |
regulator-name = "vdd_buck7"; |
| 317 |
regulator-min-microvolt = <1000000>; |
| 318 |
regulator-max-microvolt = <1500000>; |
| 319 |
regulator-always-on; |
| 320 |
regulator-ramp-delay = <25000>; |
| 321 |
regulator-enable-ramp-delay = <250>; |
| 322 |
}; |
| 323 |
|
| 324 |
buck8_reg: BUCK8 { |
| 325 |
regulator-name = "vdd_buck8"; |
| 326 |
regulator-min-microvolt = <1000000>; |
| 327 |
regulator-max-microvolt = <1500000>; |
| 328 |
regulator-always-on; |
| 329 |
regulator-ramp-delay = <25000>; |
| 330 |
regulator-enable-ramp-delay = <250>; |
| 331 |
}; |
| 332 |
|
| 333 |
buck9_reg: BUCK9 { |
| 334 |
regulator-name = "vdd_buck9"; |
| 335 |
regulator-min-microvolt = <1800000>; |
| 336 |
regulator-max-microvolt = <2100000>; |
| 337 |
regulator-always-on; |
| 338 |
regulator-ramp-delay = <25000>; |
| 339 |
regulator-enable-ramp-delay = <250>; |
| 340 |
}; |
| 341 |
|
| 342 |
buck10_reg: BUCK10 { |
| 343 |
regulator-name = "vdd_buck10"; |
| 344 |
regulator-min-microvolt = <1000000>; |
| 345 |
regulator-max-microvolt = <3000000>; |
| 346 |
regulator-always-on; |
| 347 |
regulator-ramp-delay = <25000>; |
| 348 |
regulator-enable-ramp-delay = <250>; |
| 349 |
}; |
| 350 |
}; |
| 351 |
}; |
| 352 |
}; |
| 353 |
|
| 354 |
&pinctrl_alive { |
| 355 |
pmic_irq: pmic-irq-pins { |
| 356 |
samsung,pins = "gpa0-2"; |
| 357 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 358 |
samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; |
| 359 |
}; |
| 360 |
}; |
| 361 |
|
| 362 |
&mmc_0 { |
| 363 |
status = "okay"; |
| 364 |
cap-mmc-highspeed; |
| 365 |
mmc-ddr-1_8v; |
| 366 |
mmc-hs200-1_8v; |
| 367 |
non-removable; |
| 368 |
card-detect-delay = <200>; |
| 369 |
clock-frequency = <800000000>; |
| 370 |
samsung,dw-mshc-ciu-div = <3>; |
| 371 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 372 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 373 |
pinctrl-names = "default"; |
| 374 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; |
| 375 |
bus-width = <8>; |
| 376 |
}; |
| 377 |
|
| 378 |
&mmc_2 { |
| 379 |
status = "okay"; |
| 380 |
cap-sd-highspeed; |
| 381 |
card-detect-delay = <200>; |
| 382 |
clock-frequency = <400000000>; |
| 383 |
samsung,dw-mshc-ciu-div = <3>; |
| 384 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 385 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 386 |
pinctrl-names = "default"; |
| 387 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; |
| 388 |
bus-width = <4>; |
| 389 |
vmmc-supply = <&ldo17_reg>; |
| 390 |
vqmmc-supply = <&ldo2_reg>; |
| 391 |
disable-wp; |
| 392 |
}; |
| 393 |
|
| 394 |
&pinctrl_bus1 { |
| 395 |
usb30_vbus_en: usb30-vbus-en-pins { |
| 396 |
samsung,pins = "gph1-1"; |
| 397 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 398 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 399 |
samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| 400 |
}; |
| 401 |
|
| 402 |
usb3drd_boost_en: usb3drd-boost-en-pins { |
| 403 |
samsung,pins = "gpf4-1"; |
| 404 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 405 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 406 |
samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; |
| 407 |
}; |
| 408 |
}; |
| 409 |
|
| 410 |
&ufs { |
| 411 |
status = "okay"; |
| 412 |
}; |
| 413 |
|
| 414 |
&usbdrd { |
| 415 |
vdd10-supply = <&ldo4_reg>; |
| 416 |
vdd33-supply = <&ldo6_reg>; |
| 417 |
}; |
| 418 |
|
| 419 |
&usbdrd_phy { |
| 420 |
vbus-supply = <&usb30_vbus_reg>; |
| 421 |
vbus-boost-supply = <&usb3drd_boost_5v>; |
| 422 |
}; |