| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung Exynos5433 TM2 board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2016 Samsung Electronics Co., Ltd. |
| 6 |
* |
| 7 |
* Common device tree source file for Samsung's TM2 and TM2E boards |
| 8 |
* which are based on Samsung Exynos5433 SoC. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "exynos5433.dtsi" |
| 13 |
#include <dt-bindings/clock/samsung,s2mps11.h> |
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
#include <dt-bindings/input/input.h> |
| 16 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 17 |
#include <dt-bindings/sound/samsung-i2s.h> |
| 18 |
|
| 19 |
/ { |
| 20 |
aliases { |
| 21 |
gsc0 = &gsc_0; |
| 22 |
gsc1 = &gsc_1; |
| 23 |
gsc2 = &gsc_2; |
| 24 |
mmc0 = &mshc_0; |
| 25 |
mmc2 = &mshc_2; |
| 26 |
pinctrl0 = &pinctrl_alive; |
| 27 |
pinctrl1 = &pinctrl_aud; |
| 28 |
pinctrl2 = &pinctrl_cpif; |
| 29 |
pinctrl3 = &pinctrl_ese; |
| 30 |
pinctrl4 = &pinctrl_finger; |
| 31 |
pinctrl5 = &pinctrl_fsys; |
| 32 |
pinctrl6 = &pinctrl_imem; |
| 33 |
pinctrl7 = &pinctrl_nfc; |
| 34 |
pinctrl8 = &pinctrl_peric; |
| 35 |
pinctrl9 = &pinctrl_touch; |
| 36 |
serial0 = &serial_0; |
| 37 |
serial1 = &serial_1; |
| 38 |
serial2 = &serial_2; |
| 39 |
serial3 = &serial_3; |
| 40 |
spi0 = &spi_0; |
| 41 |
spi1 = &spi_1; |
| 42 |
spi2 = &spi_2; |
| 43 |
spi3 = &spi_3; |
| 44 |
spi4 = &spi_4; |
| 45 |
}; |
| 46 |
|
| 47 |
chosen { |
| 48 |
stdout-path = &serial_1; |
| 49 |
}; |
| 50 |
|
| 51 |
memory@20000000 { |
| 52 |
device_type = "memory"; |
| 53 |
reg = <0x0 0x20000000 0x0 0xc0000000>; |
| 54 |
}; |
| 55 |
|
| 56 |
gpio-keys { |
| 57 |
compatible = "gpio-keys"; |
| 58 |
|
| 59 |
power-key { |
| 60 |
gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; |
| 61 |
linux,code = <KEY_POWER>; |
| 62 |
label = "power key"; |
| 63 |
debounce-interval = <10>; |
| 64 |
}; |
| 65 |
|
| 66 |
volume-up-key { |
| 67 |
gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; |
| 68 |
linux,code = <KEY_VOLUMEUP>; |
| 69 |
label = "volume-up key"; |
| 70 |
debounce-interval = <10>; |
| 71 |
}; |
| 72 |
|
| 73 |
volume-down-key { |
| 74 |
gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; |
| 75 |
linux,code = <KEY_VOLUMEDOWN>; |
| 76 |
label = "volume-down key"; |
| 77 |
debounce-interval = <10>; |
| 78 |
}; |
| 79 |
|
| 80 |
homepage-key { |
| 81 |
gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; |
| 82 |
linux,code = <KEY_MENU>; |
| 83 |
label = "homepage key"; |
| 84 |
debounce-interval = <10>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
i2c_max98504: i2c-13 { |
| 89 |
compatible = "i2c-gpio"; |
| 90 |
sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>; |
| 91 |
scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>; |
| 92 |
i2c-gpio,delay-us = <2>; |
| 93 |
#address-cells = <1>; |
| 94 |
#size-cells = <0>; |
| 95 |
|
| 96 |
max98504: amplifier@31 { |
| 97 |
compatible = "maxim,max98504"; |
| 98 |
reg = <0x31>; |
| 99 |
|
| 100 |
DIOVDD-supply = <&ldo3_reg>; |
| 101 |
DVDD-supply = <&ldo3_reg>; |
| 102 |
PVDD-supply = <&vph_pwr_regulator>; |
| 103 |
}; |
| 104 |
}; |
| 105 |
|
| 106 |
vph_pwr_regulator: regulator-vph-pwr { |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
regulator-name = "VPH_PWR"; |
| 109 |
regulator-min-microvolt = <4200000>; |
| 110 |
regulator-max-microvolt = <4200000>; |
| 111 |
}; |
| 112 |
|
| 113 |
irda_regulator: regulator-irda { |
| 114 |
compatible = "regulator-fixed"; |
| 115 |
enable-active-high; |
| 116 |
gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; |
| 117 |
regulator-name = "irda_regulator"; |
| 118 |
}; |
| 119 |
|
| 120 |
sound { |
| 121 |
compatible = "samsung,tm2-audio"; |
| 122 |
audio-codec = <&wm5110>, <&hdmi>; |
| 123 |
i2s-controller = <&i2s0 0>, <&i2s1 0>; |
| 124 |
audio-amplifier = <&max98504>; |
| 125 |
mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; |
| 126 |
model = "wm5110"; |
| 127 |
audio-routing = /* Headphone */ |
| 128 |
"HP", "HPOUT1L", |
| 129 |
"HP", "HPOUT1R", |
| 130 |
|
| 131 |
/* Speaker */ |
| 132 |
"SPK", "SPKOUT", |
| 133 |
"SPKOUT", "HPOUT2L", |
| 134 |
"SPKOUT", "HPOUT2R", |
| 135 |
|
| 136 |
/* Receiver */ |
| 137 |
"RCV", "HPOUT3L", |
| 138 |
"RCV", "HPOUT3R"; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
&adc { |
| 143 |
vdd-supply = <&ldo3_reg>; |
| 144 |
status = "okay"; |
| 145 |
|
| 146 |
thermistor-ap { |
| 147 |
compatible = "murata,ncp03wf104"; |
| 148 |
pullup-uv = <1800000>; |
| 149 |
pullup-ohm = <100000>; |
| 150 |
pulldown-ohm = <0>; |
| 151 |
io-channels = <&adc 0>; |
| 152 |
}; |
| 153 |
|
| 154 |
thermistor-battery { |
| 155 |
compatible = "murata,ncp03wf104"; |
| 156 |
pullup-uv = <1800000>; |
| 157 |
pullup-ohm = <100000>; |
| 158 |
pulldown-ohm = <0>; |
| 159 |
io-channels = <&adc 1>; |
| 160 |
#thermal-sensor-cells = <0>; |
| 161 |
}; |
| 162 |
|
| 163 |
thermistor-charger { |
| 164 |
compatible = "murata,ncp03wf104"; |
| 165 |
pullup-uv = <1800000>; |
| 166 |
pullup-ohm = <100000>; |
| 167 |
pulldown-ohm = <0>; |
| 168 |
io-channels = <&adc 2>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
&bus_g2d_400 { |
| 173 |
devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; |
| 174 |
vdd-supply = <&buck4_reg>; |
| 175 |
exynos,saturation-ratio = <10>; |
| 176 |
status = "okay"; |
| 177 |
}; |
| 178 |
|
| 179 |
&bus_g2d_266 { |
| 180 |
devfreq = <&bus_g2d_400>; |
| 181 |
status = "okay"; |
| 182 |
}; |
| 183 |
|
| 184 |
&bus_gscl { |
| 185 |
devfreq = <&bus_g2d_400>; |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&bus_hevc { |
| 190 |
devfreq = <&bus_g2d_400>; |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&bus_jpeg { |
| 195 |
devfreq = <&bus_g2d_400>; |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&bus_mfc { |
| 200 |
devfreq = <&bus_g2d_400>; |
| 201 |
status = "okay"; |
| 202 |
}; |
| 203 |
|
| 204 |
&bus_mscl { |
| 205 |
devfreq = <&bus_g2d_400>; |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
&bus_noc0 { |
| 210 |
devfreq = <&bus_g2d_400>; |
| 211 |
status = "okay"; |
| 212 |
}; |
| 213 |
|
| 214 |
&bus_noc1 { |
| 215 |
devfreq = <&bus_g2d_400>; |
| 216 |
status = "okay"; |
| 217 |
}; |
| 218 |
|
| 219 |
&bus_noc2 { |
| 220 |
devfreq = <&bus_g2d_400>; |
| 221 |
status = "okay"; |
| 222 |
}; |
| 223 |
|
| 224 |
&cmu_aud { |
| 225 |
assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, |
| 226 |
<&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, |
| 227 |
<&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, |
| 228 |
<&cmu_top CLK_MOUT_AUD_PLL>, |
| 229 |
<&cmu_top CLK_MOUT_AUD_PLL_USER_T>, |
| 230 |
<&cmu_top CLK_MOUT_SCLK_AUDIO0>, |
| 231 |
<&cmu_top CLK_MOUT_SCLK_AUDIO1>, |
| 232 |
<&cmu_top CLK_MOUT_SCLK_SPDIF>, |
| 233 |
|
| 234 |
<&cmu_aud CLK_DIV_AUD_CA5>, |
| 235 |
<&cmu_aud CLK_DIV_ACLK_AUD>, |
| 236 |
<&cmu_aud CLK_DIV_PCLK_DBG_AUD>, |
| 237 |
<&cmu_aud CLK_DIV_SCLK_AUD_I2S>, |
| 238 |
<&cmu_aud CLK_DIV_SCLK_AUD_PCM>, |
| 239 |
<&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, |
| 240 |
<&cmu_aud CLK_DIV_SCLK_AUD_UART>, |
| 241 |
<&cmu_top CLK_DIV_SCLK_AUDIO0>, |
| 242 |
<&cmu_top CLK_DIV_SCLK_AUDIO1>, |
| 243 |
<&cmu_top CLK_DIV_SCLK_PCM1>, |
| 244 |
<&cmu_top CLK_DIV_SCLK_I2S1>; |
| 245 |
|
| 246 |
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, |
| 247 |
<&cmu_aud CLK_MOUT_AUD_PLL_USER>, |
| 248 |
<&cmu_aud CLK_MOUT_AUD_PLL_USER>, |
| 249 |
<&cmu_top CLK_FOUT_AUD_PLL>, |
| 250 |
<&cmu_top CLK_MOUT_AUD_PLL>, |
| 251 |
<&cmu_top CLK_MOUT_AUD_PLL_USER_T>, |
| 252 |
<&cmu_top CLK_MOUT_AUD_PLL_USER_T>, |
| 253 |
<&cmu_top CLK_SCLK_AUDIO0>; |
| 254 |
|
| 255 |
assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, |
| 256 |
<196608001>, <65536001>, <32768001>, <49152001>, |
| 257 |
<2048001>, <24576001>, <196608001>, |
| 258 |
<24576001>, <98304001>, <2048001>, <49152001>; |
| 259 |
}; |
| 260 |
|
| 261 |
&cmu_fsys { |
| 262 |
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, |
| 263 |
<&cmu_top CLK_MOUT_SCLK_USBHOST30>, |
| 264 |
<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, |
| 265 |
<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, |
| 266 |
<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, |
| 267 |
<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, |
| 268 |
<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, |
| 269 |
<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, |
| 270 |
<&cmu_top CLK_DIV_SCLK_USBDRD30>, |
| 271 |
<&cmu_top CLK_DIV_SCLK_USBHOST30>; |
| 272 |
assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, |
| 273 |
<&cmu_top CLK_MOUT_BUS_PLL_USER>, |
| 274 |
<&cmu_top CLK_SCLK_USBDRD30_FSYS>, |
| 275 |
<&cmu_top CLK_SCLK_USBHOST30_FSYS>, |
| 276 |
<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, |
| 277 |
<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, |
| 278 |
<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, |
| 279 |
<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; |
| 280 |
assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, |
| 281 |
<66700000>, <66700000>; |
| 282 |
}; |
| 283 |
|
| 284 |
&cmu_gscl { |
| 285 |
assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, |
| 286 |
<&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; |
| 287 |
assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, |
| 288 |
<&cmu_top CLK_ACLK_GSCL_333>; |
| 289 |
}; |
| 290 |
|
| 291 |
&cmu_mfc { |
| 292 |
assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; |
| 293 |
assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; |
| 294 |
}; |
| 295 |
|
| 296 |
&cmu_mif { |
| 297 |
assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>; |
| 298 |
assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>; |
| 299 |
assigned-clock-rates = <0>, <333000000>; |
| 300 |
}; |
| 301 |
|
| 302 |
&cmu_mscl { |
| 303 |
assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, |
| 304 |
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, |
| 305 |
<&cmu_mscl CLK_MOUT_SCLK_JPEG>, |
| 306 |
<&cmu_top CLK_MOUT_SCLK_JPEG_A>; |
| 307 |
assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, |
| 308 |
<&cmu_top CLK_SCLK_JPEG_MSCL>, |
| 309 |
<&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, |
| 310 |
<&cmu_top CLK_MOUT_BUS_PLL_USER>; |
| 311 |
}; |
| 312 |
|
| 313 |
&cmu_top { |
| 314 |
assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>; |
| 315 |
assigned-clock-rates = <196608001>; |
| 316 |
}; |
| 317 |
|
| 318 |
&cpu0 { |
| 319 |
cpu-supply = <&buck3_reg>; |
| 320 |
}; |
| 321 |
|
| 322 |
&cpu4 { |
| 323 |
cpu-supply = <&buck2_reg>; |
| 324 |
}; |
| 325 |
|
| 326 |
&decon { |
| 327 |
status = "okay"; |
| 328 |
}; |
| 329 |
|
| 330 |
&decon_tv { |
| 331 |
status = "okay"; |
| 332 |
|
| 333 |
ports { |
| 334 |
#address-cells = <1>; |
| 335 |
#size-cells = <0>; |
| 336 |
|
| 337 |
port@0 { |
| 338 |
reg = <0>; |
| 339 |
tv_to_hdmi: endpoint { |
| 340 |
remote-endpoint = <&hdmi_to_tv>; |
| 341 |
}; |
| 342 |
}; |
| 343 |
}; |
| 344 |
}; |
| 345 |
|
| 346 |
&dsi { |
| 347 |
status = "okay"; |
| 348 |
vddcore-supply = <&ldo6_reg>; |
| 349 |
vddio-supply = <&ldo7_reg>; |
| 350 |
samsung,burst-clock-frequency = <512000000>; |
| 351 |
samsung,esc-clock-frequency = <16000000>; |
| 352 |
samsung,pll-clock-frequency = <24000000>; |
| 353 |
pinctrl-names = "default"; |
| 354 |
pinctrl-0 = <&te_irq>; |
| 355 |
}; |
| 356 |
|
| 357 |
&gpu { |
| 358 |
mali-supply = <&buck6_reg>; |
| 359 |
status = "okay"; |
| 360 |
}; |
| 361 |
|
| 362 |
&hdmi { |
| 363 |
hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; |
| 364 |
status = "okay"; |
| 365 |
vdd-supply = <&ldo6_reg>; |
| 366 |
vdd_osc-supply = <&ldo7_reg>; |
| 367 |
vdd_pll-supply = <&ldo6_reg>; |
| 368 |
|
| 369 |
ports { |
| 370 |
#address-cells = <1>; |
| 371 |
#size-cells = <0>; |
| 372 |
|
| 373 |
port@0 { |
| 374 |
reg = <0>; |
| 375 |
hdmi_to_tv: endpoint { |
| 376 |
remote-endpoint = <&tv_to_hdmi>; |
| 377 |
}; |
| 378 |
}; |
| 379 |
|
| 380 |
port@1 { |
| 381 |
reg = <1>; |
| 382 |
hdmi_to_mhl: endpoint { |
| 383 |
remote-endpoint = <&mhl_to_hdmi>; |
| 384 |
}; |
| 385 |
}; |
| 386 |
}; |
| 387 |
}; |
| 388 |
|
| 389 |
&hsi2c_0 { |
| 390 |
status = "okay"; |
| 391 |
clock-frequency = <2500000>; |
| 392 |
|
| 393 |
pmic@66 { |
| 394 |
compatible = "samsung,s2mps13-pmic"; |
| 395 |
interrupt-parent = <&gpa0>; |
| 396 |
interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| 397 |
reg = <0x66>; |
| 398 |
samsung,s2mps11-wrstbi-ground; |
| 399 |
wakeup-source; |
| 400 |
|
| 401 |
s2mps13_osc: clocks { |
| 402 |
compatible = "samsung,s2mps13-clk"; |
| 403 |
#clock-cells = <1>; |
| 404 |
clock-output-names = "s2mps13_ap", "s2mps13_cp", |
| 405 |
"s2mps13_bt"; |
| 406 |
}; |
| 407 |
|
| 408 |
regulators { |
| 409 |
ldo1_reg: LDO1 { |
| 410 |
regulator-name = "VDD_ALIVE_0.9V_AP"; |
| 411 |
regulator-min-microvolt = <900000>; |
| 412 |
regulator-max-microvolt = <900000>; |
| 413 |
regulator-always-on; |
| 414 |
}; |
| 415 |
|
| 416 |
ldo2_reg: LDO2 { |
| 417 |
regulator-name = "VDDQ_MMC2_2.8V_AP"; |
| 418 |
regulator-min-microvolt = <2800000>; |
| 419 |
regulator-max-microvolt = <2800000>; |
| 420 |
regulator-always-on; |
| 421 |
regulator-state-mem { |
| 422 |
regulator-off-in-suspend; |
| 423 |
}; |
| 424 |
}; |
| 425 |
|
| 426 |
ldo3_reg: LDO3 { |
| 427 |
regulator-name = "VDD1_E_1.8V_AP"; |
| 428 |
regulator-min-microvolt = <1800000>; |
| 429 |
regulator-max-microvolt = <1800000>; |
| 430 |
regulator-always-on; |
| 431 |
}; |
| 432 |
|
| 433 |
ldo4_reg: LDO4 { |
| 434 |
regulator-name = "VDD10_MIF_PLL_1.0V_AP"; |
| 435 |
regulator-min-microvolt = <1300000>; |
| 436 |
regulator-max-microvolt = <1300000>; |
| 437 |
regulator-always-on; |
| 438 |
regulator-state-mem { |
| 439 |
regulator-off-in-suspend; |
| 440 |
}; |
| 441 |
}; |
| 442 |
|
| 443 |
ldo5_reg: LDO5 { |
| 444 |
regulator-name = "VDD10_DPLL_1.0V_AP"; |
| 445 |
regulator-min-microvolt = <1000000>; |
| 446 |
regulator-max-microvolt = <1000000>; |
| 447 |
regulator-always-on; |
| 448 |
regulator-state-mem { |
| 449 |
regulator-off-in-suspend; |
| 450 |
}; |
| 451 |
}; |
| 452 |
|
| 453 |
ldo6_reg: LDO6 { |
| 454 |
regulator-name = "VDD10_MIPI2L_1.0V_AP"; |
| 455 |
regulator-min-microvolt = <1000000>; |
| 456 |
regulator-max-microvolt = <1000000>; |
| 457 |
regulator-state-mem { |
| 458 |
regulator-off-in-suspend; |
| 459 |
}; |
| 460 |
}; |
| 461 |
|
| 462 |
ldo7_reg: LDO7 { |
| 463 |
regulator-name = "VDD18_MIPI2L_1.8V_AP"; |
| 464 |
regulator-min-microvolt = <1800000>; |
| 465 |
regulator-max-microvolt = <1800000>; |
| 466 |
regulator-always-on; |
| 467 |
regulator-state-mem { |
| 468 |
regulator-off-in-suspend; |
| 469 |
}; |
| 470 |
}; |
| 471 |
|
| 472 |
ldo8_reg: LDO8 { |
| 473 |
regulator-name = "VDD18_LLI_1.8V_AP"; |
| 474 |
regulator-min-microvolt = <1800000>; |
| 475 |
regulator-max-microvolt = <1800000>; |
| 476 |
regulator-always-on; |
| 477 |
regulator-state-mem { |
| 478 |
regulator-off-in-suspend; |
| 479 |
}; |
| 480 |
}; |
| 481 |
|
| 482 |
ldo9_reg: LDO9 { |
| 483 |
regulator-name = "VDD18_ABB_ETC_1.8V_AP"; |
| 484 |
regulator-min-microvolt = <1800000>; |
| 485 |
regulator-max-microvolt = <1800000>; |
| 486 |
regulator-always-on; |
| 487 |
regulator-state-mem { |
| 488 |
regulator-off-in-suspend; |
| 489 |
}; |
| 490 |
}; |
| 491 |
|
| 492 |
ldo10_reg: LDO10 { |
| 493 |
regulator-name = "VDD33_USB30_3.0V_AP"; |
| 494 |
regulator-min-microvolt = <3000000>; |
| 495 |
regulator-max-microvolt = <3000000>; |
| 496 |
regulator-state-mem { |
| 497 |
regulator-off-in-suspend; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
ldo11_reg: LDO11 { |
| 502 |
regulator-name = "VDD_INT_M_1.0V_AP"; |
| 503 |
regulator-min-microvolt = <1000000>; |
| 504 |
regulator-max-microvolt = <1000000>; |
| 505 |
regulator-always-on; |
| 506 |
regulator-state-mem { |
| 507 |
regulator-off-in-suspend; |
| 508 |
}; |
| 509 |
}; |
| 510 |
|
| 511 |
ldo12_reg: LDO12 { |
| 512 |
regulator-name = "VDD_KFC_M_1.1V_AP"; |
| 513 |
regulator-min-microvolt = <800000>; |
| 514 |
regulator-max-microvolt = <1350000>; |
| 515 |
regulator-always-on; |
| 516 |
}; |
| 517 |
|
| 518 |
ldo13_reg: LDO13 { |
| 519 |
regulator-name = "VDD_G3D_M_0.95V_AP"; |
| 520 |
regulator-min-microvolt = <950000>; |
| 521 |
regulator-max-microvolt = <950000>; |
| 522 |
regulator-always-on; |
| 523 |
regulator-state-mem { |
| 524 |
regulator-off-in-suspend; |
| 525 |
}; |
| 526 |
}; |
| 527 |
|
| 528 |
ldo14_reg: LDO14 { |
| 529 |
regulator-name = "VDDQ_M1_LDO_1.2V_AP"; |
| 530 |
regulator-min-microvolt = <1200000>; |
| 531 |
regulator-max-microvolt = <1200000>; |
| 532 |
regulator-always-on; |
| 533 |
regulator-state-mem { |
| 534 |
regulator-off-in-suspend; |
| 535 |
}; |
| 536 |
}; |
| 537 |
|
| 538 |
ldo15_reg: LDO15 { |
| 539 |
regulator-name = "VDDQ_M2_LDO_1.2V_AP"; |
| 540 |
regulator-min-microvolt = <1200000>; |
| 541 |
regulator-max-microvolt = <1200000>; |
| 542 |
regulator-always-on; |
| 543 |
regulator-state-mem { |
| 544 |
regulator-off-in-suspend; |
| 545 |
}; |
| 546 |
}; |
| 547 |
|
| 548 |
ldo16_reg: LDO16 { |
| 549 |
regulator-name = "VDDQ_EFUSE"; |
| 550 |
regulator-min-microvolt = <1400000>; |
| 551 |
regulator-max-microvolt = <3400000>; |
| 552 |
regulator-always-on; |
| 553 |
}; |
| 554 |
|
| 555 |
ldo17_reg: LDO17 { |
| 556 |
regulator-name = "V_TFLASH_2.8V_AP"; |
| 557 |
regulator-min-microvolt = <2800000>; |
| 558 |
regulator-max-microvolt = <2800000>; |
| 559 |
}; |
| 560 |
|
| 561 |
ldo18_reg: LDO18 { |
| 562 |
regulator-name = "V_CODEC_1.8V_AP"; |
| 563 |
regulator-min-microvolt = <1800000>; |
| 564 |
regulator-max-microvolt = <1800000>; |
| 565 |
}; |
| 566 |
|
| 567 |
ldo19_reg: LDO19 { |
| 568 |
regulator-name = "VDDA_1.8V_COMP"; |
| 569 |
regulator-min-microvolt = <1800000>; |
| 570 |
regulator-max-microvolt = <1800000>; |
| 571 |
regulator-always-on; |
| 572 |
}; |
| 573 |
|
| 574 |
ldo20_reg: LDO20 { |
| 575 |
regulator-name = "VCC_2.8V_AP"; |
| 576 |
regulator-min-microvolt = <2800000>; |
| 577 |
regulator-max-microvolt = <2800000>; |
| 578 |
regulator-always-on; |
| 579 |
}; |
| 580 |
|
| 581 |
ldo21_reg: LDO21 { |
| 582 |
regulator-name = "VT_CAM_1.8V"; |
| 583 |
regulator-min-microvolt = <1800000>; |
| 584 |
regulator-max-microvolt = <1800000>; |
| 585 |
}; |
| 586 |
|
| 587 |
ldo22_reg: LDO22 { |
| 588 |
regulator-name = "CAM_IO_1.8V_AP"; |
| 589 |
regulator-min-microvolt = <1800000>; |
| 590 |
regulator-max-microvolt = <1800000>; |
| 591 |
}; |
| 592 |
|
| 593 |
ldo23_reg: LDO23 { |
| 594 |
regulator-name = "CAM_SEN_CORE_1.05V_AP"; |
| 595 |
regulator-min-microvolt = <1050000>; |
| 596 |
regulator-max-microvolt = <1050000>; |
| 597 |
}; |
| 598 |
|
| 599 |
ldo24_reg: LDO24 { |
| 600 |
regulator-name = "VT_CAM_1.2V"; |
| 601 |
regulator-min-microvolt = <1200000>; |
| 602 |
regulator-max-microvolt = <1200000>; |
| 603 |
}; |
| 604 |
|
| 605 |
ldo25_reg: LDO25 { |
| 606 |
regulator-name = "UNUSED_LDO25"; |
| 607 |
regulator-min-microvolt = <2800000>; |
| 608 |
regulator-max-microvolt = <2800000>; |
| 609 |
}; |
| 610 |
|
| 611 |
ldo26_reg: LDO26 { |
| 612 |
regulator-name = "CAM_AF_2.8V_AP"; |
| 613 |
regulator-min-microvolt = <2800000>; |
| 614 |
regulator-max-microvolt = <2800000>; |
| 615 |
}; |
| 616 |
|
| 617 |
ldo27_reg: LDO27 { |
| 618 |
regulator-name = "VCC_3.0V_LCD_AP"; |
| 619 |
regulator-min-microvolt = <3000000>; |
| 620 |
regulator-max-microvolt = <3000000>; |
| 621 |
}; |
| 622 |
|
| 623 |
ldo28_reg: LDO28 { |
| 624 |
regulator-name = "VCC_1.8V_LCD_AP"; |
| 625 |
regulator-min-microvolt = <1800000>; |
| 626 |
regulator-max-microvolt = <1800000>; |
| 627 |
}; |
| 628 |
|
| 629 |
ldo29_reg: LDO29 { |
| 630 |
regulator-name = "VT_CAM_2.8V"; |
| 631 |
regulator-min-microvolt = <3000000>; |
| 632 |
regulator-max-microvolt = <3000000>; |
| 633 |
}; |
| 634 |
|
| 635 |
ldo30_reg: LDO30 { |
| 636 |
regulator-name = "TSP_AVDD_3.3V_AP"; |
| 637 |
regulator-min-microvolt = <3300000>; |
| 638 |
regulator-max-microvolt = <3300000>; |
| 639 |
}; |
| 640 |
|
| 641 |
ldo31_reg: LDO31 { |
| 642 |
/* |
| 643 |
* LDO31 differs from target to target, |
| 644 |
* its definition is in the .dts |
| 645 |
*/ |
| 646 |
}; |
| 647 |
|
| 648 |
ldo32_reg: LDO32 { |
| 649 |
regulator-name = "VTOUCH_1.8V_AP"; |
| 650 |
regulator-min-microvolt = <1800000>; |
| 651 |
regulator-max-microvolt = <1800000>; |
| 652 |
}; |
| 653 |
|
| 654 |
ldo33_reg: LDO33 { |
| 655 |
regulator-name = "VTOUCH_LED_3.3V"; |
| 656 |
regulator-min-microvolt = <2500000>; |
| 657 |
regulator-max-microvolt = <3300000>; |
| 658 |
regulator-ramp-delay = <12500>; |
| 659 |
}; |
| 660 |
|
| 661 |
ldo34_reg: LDO34 { |
| 662 |
regulator-name = "VCC_1.8V_MHL_AP"; |
| 663 |
regulator-min-microvolt = <1000000>; |
| 664 |
regulator-max-microvolt = <2100000>; |
| 665 |
}; |
| 666 |
|
| 667 |
ldo35_reg: LDO35 { |
| 668 |
regulator-name = "OIS_VM_2.8V"; |
| 669 |
regulator-min-microvolt = <1800000>; |
| 670 |
regulator-max-microvolt = <2800000>; |
| 671 |
}; |
| 672 |
|
| 673 |
ldo36_reg: LDO36 { |
| 674 |
regulator-name = "VSIL_1.0V"; |
| 675 |
regulator-min-microvolt = <1000000>; |
| 676 |
regulator-max-microvolt = <1000000>; |
| 677 |
}; |
| 678 |
|
| 679 |
ldo37_reg: LDO37 { |
| 680 |
regulator-name = "VF_1.8V"; |
| 681 |
regulator-min-microvolt = <1800000>; |
| 682 |
regulator-max-microvolt = <1800000>; |
| 683 |
}; |
| 684 |
|
| 685 |
ldo38_reg: LDO38 { |
| 686 |
/* |
| 687 |
* LDO38 differs from target to target, |
| 688 |
* its definition is in the .dts |
| 689 |
*/ |
| 690 |
}; |
| 691 |
|
| 692 |
ldo39_reg: LDO39 { |
| 693 |
regulator-name = "V_HRM_1.8V"; |
| 694 |
regulator-min-microvolt = <1800000>; |
| 695 |
regulator-max-microvolt = <1800000>; |
| 696 |
}; |
| 697 |
|
| 698 |
ldo40_reg: LDO40 { |
| 699 |
regulator-name = "V_HRM_3.3V"; |
| 700 |
regulator-min-microvolt = <3300000>; |
| 701 |
regulator-max-microvolt = <3300000>; |
| 702 |
}; |
| 703 |
|
| 704 |
buck1_reg: BUCK1 { |
| 705 |
regulator-name = "VDD_MIF_0.9V_AP"; |
| 706 |
regulator-min-microvolt = <600000>; |
| 707 |
regulator-max-microvolt = <1500000>; |
| 708 |
regulator-always-on; |
| 709 |
regulator-state-mem { |
| 710 |
regulator-off-in-suspend; |
| 711 |
}; |
| 712 |
}; |
| 713 |
|
| 714 |
buck2_reg: BUCK2 { |
| 715 |
regulator-name = "VDD_EGL_1.0V_AP"; |
| 716 |
regulator-min-microvolt = <900000>; |
| 717 |
regulator-max-microvolt = <1300000>; |
| 718 |
regulator-always-on; |
| 719 |
regulator-state-mem { |
| 720 |
regulator-off-in-suspend; |
| 721 |
}; |
| 722 |
}; |
| 723 |
|
| 724 |
buck3_reg: BUCK3 { |
| 725 |
regulator-name = "VDD_KFC_1.0V_AP"; |
| 726 |
regulator-min-microvolt = <800000>; |
| 727 |
regulator-max-microvolt = <1200000>; |
| 728 |
regulator-always-on; |
| 729 |
regulator-state-mem { |
| 730 |
regulator-off-in-suspend; |
| 731 |
}; |
| 732 |
}; |
| 733 |
|
| 734 |
buck4_reg: BUCK4 { |
| 735 |
regulator-name = "VDD_INT_0.95V_AP"; |
| 736 |
regulator-min-microvolt = <600000>; |
| 737 |
regulator-max-microvolt = <1500000>; |
| 738 |
regulator-always-on; |
| 739 |
regulator-state-mem { |
| 740 |
regulator-off-in-suspend; |
| 741 |
}; |
| 742 |
}; |
| 743 |
|
| 744 |
buck5_reg: BUCK5 { |
| 745 |
regulator-name = "VDD_DISP_CAM0_0.9V_AP"; |
| 746 |
regulator-min-microvolt = <600000>; |
| 747 |
regulator-max-microvolt = <1500000>; |
| 748 |
regulator-always-on; |
| 749 |
regulator-state-mem { |
| 750 |
regulator-off-in-suspend; |
| 751 |
}; |
| 752 |
}; |
| 753 |
|
| 754 |
buck6_reg: BUCK6 { |
| 755 |
regulator-name = "VDD_G3D_0.9V_AP"; |
| 756 |
regulator-min-microvolt = <600000>; |
| 757 |
regulator-max-microvolt = <1500000>; |
| 758 |
regulator-always-on; |
| 759 |
regulator-state-mem { |
| 760 |
regulator-off-in-suspend; |
| 761 |
}; |
| 762 |
}; |
| 763 |
|
| 764 |
buck7_reg: BUCK7 { |
| 765 |
regulator-name = "VDD_MEM1_1.2V_AP"; |
| 766 |
regulator-min-microvolt = <1200000>; |
| 767 |
regulator-max-microvolt = <1200000>; |
| 768 |
regulator-always-on; |
| 769 |
}; |
| 770 |
|
| 771 |
buck8_reg: BUCK8 { |
| 772 |
regulator-name = "VDD_LLDO_1.35V_AP"; |
| 773 |
regulator-min-microvolt = <1350000>; |
| 774 |
regulator-max-microvolt = <3300000>; |
| 775 |
regulator-always-on; |
| 776 |
}; |
| 777 |
|
| 778 |
buck9_reg: BUCK9 { |
| 779 |
regulator-name = "VDD_MLDO_2.0V_AP"; |
| 780 |
regulator-min-microvolt = <1350000>; |
| 781 |
regulator-max-microvolt = <3300000>; |
| 782 |
regulator-always-on; |
| 783 |
}; |
| 784 |
|
| 785 |
buck10_reg: BUCK10 { |
| 786 |
regulator-name = "vdd_mem2"; |
| 787 |
regulator-min-microvolt = <550000>; |
| 788 |
regulator-max-microvolt = <1500000>; |
| 789 |
regulator-always-on; |
| 790 |
}; |
| 791 |
}; |
| 792 |
}; |
| 793 |
}; |
| 794 |
|
| 795 |
&hsi2c_4 { |
| 796 |
status = "okay"; |
| 797 |
|
| 798 |
s3fwrn5: nfc@27 { |
| 799 |
compatible = "samsung,s3fwrn5-i2c"; |
| 800 |
reg = <0x27>; |
| 801 |
interrupt-parent = <&gpa1>; |
| 802 |
interrupts = <3 IRQ_TYPE_EDGE_RISING>; |
| 803 |
en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>; |
| 804 |
wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; |
| 805 |
}; |
| 806 |
}; |
| 807 |
|
| 808 |
&hsi2c_5 { |
| 809 |
status = "okay"; |
| 810 |
|
| 811 |
stmfts: touchscreen@49 { |
| 812 |
compatible = "st,stmfts"; |
| 813 |
reg = <0x49>; |
| 814 |
interrupt-parent = <&gpa1>; |
| 815 |
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; |
| 816 |
avdd-supply = <&ldo30_reg>; |
| 817 |
vdd-supply = <&ldo31_reg>; |
| 818 |
}; |
| 819 |
}; |
| 820 |
|
| 821 |
&hsi2c_7 { |
| 822 |
status = "okay"; |
| 823 |
clock-frequency = <1000000>; |
| 824 |
|
| 825 |
bridge@39 { |
| 826 |
reg = <0x39>; |
| 827 |
compatible = "sil,sii8620"; |
| 828 |
cvcc10-supply = <&ldo36_reg>; |
| 829 |
iovcc18-supply = <&ldo34_reg>; |
| 830 |
interrupt-parent = <&gpf0>; |
| 831 |
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; |
| 832 |
reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>; |
| 833 |
clocks = <&pmu_system_controller 0>; |
| 834 |
clock-names = "xtal"; |
| 835 |
|
| 836 |
ports { |
| 837 |
#address-cells = <1>; |
| 838 |
#size-cells = <0>; |
| 839 |
|
| 840 |
port@0 { |
| 841 |
reg = <0>; |
| 842 |
mhl_to_hdmi: endpoint { |
| 843 |
remote-endpoint = <&hdmi_to_mhl>; |
| 844 |
}; |
| 845 |
}; |
| 846 |
|
| 847 |
port@1 { |
| 848 |
reg = <1>; |
| 849 |
mhl_to_musb_con: endpoint { |
| 850 |
remote-endpoint = <&musb_con_to_mhl>; |
| 851 |
}; |
| 852 |
}; |
| 853 |
}; |
| 854 |
}; |
| 855 |
}; |
| 856 |
|
| 857 |
&hsi2c_8 { |
| 858 |
status = "okay"; |
| 859 |
|
| 860 |
pmic@66 { |
| 861 |
compatible = "maxim,max77843"; |
| 862 |
interrupt-parent = <&gpa1>; |
| 863 |
interrupts = <5 IRQ_TYPE_EDGE_FALLING>; |
| 864 |
reg = <0x66>; |
| 865 |
|
| 866 |
muic: extcon { |
| 867 |
compatible = "maxim,max77843-muic"; |
| 868 |
|
| 869 |
musb_con: connector { |
| 870 |
compatible = "samsung,usb-connector-11pin", |
| 871 |
"usb-b-connector"; |
| 872 |
label = "micro-USB"; |
| 873 |
type = "micro"; |
| 874 |
|
| 875 |
ports { |
| 876 |
#address-cells = <1>; |
| 877 |
#size-cells = <0>; |
| 878 |
|
| 879 |
port@0 { |
| 880 |
/* |
| 881 |
* TODO: The DTS this is based on does not have |
| 882 |
* port@0 which is a required property. The ports |
| 883 |
* look incomplete and need fixing. |
| 884 |
* Add a disabled port just to satisfy dtschema. |
| 885 |
*/ |
| 886 |
reg = <0>; |
| 887 |
status = "disabled"; |
| 888 |
}; |
| 889 |
|
| 890 |
port@3 { |
| 891 |
reg = <3>; |
| 892 |
musb_con_to_mhl: endpoint { |
| 893 |
remote-endpoint = <&mhl_to_musb_con>; |
| 894 |
}; |
| 895 |
}; |
| 896 |
}; |
| 897 |
}; |
| 898 |
|
| 899 |
ports { |
| 900 |
port { |
| 901 |
muic_to_usb: endpoint { |
| 902 |
remote-endpoint = <&usb_to_muic>; |
| 903 |
}; |
| 904 |
}; |
| 905 |
}; |
| 906 |
}; |
| 907 |
|
| 908 |
regulators { |
| 909 |
compatible = "maxim,max77843-regulator"; |
| 910 |
safeout1_reg: SAFEOUT1 { |
| 911 |
regulator-name = "SAFEOUT1"; |
| 912 |
regulator-min-microvolt = <3300000>; |
| 913 |
regulator-max-microvolt = <4950000>; |
| 914 |
}; |
| 915 |
|
| 916 |
safeout2_reg: SAFEOUT2 { |
| 917 |
regulator-name = "SAFEOUT2"; |
| 918 |
regulator-min-microvolt = <3300000>; |
| 919 |
regulator-max-microvolt = <4950000>; |
| 920 |
}; |
| 921 |
|
| 922 |
charger_reg: CHARGER { |
| 923 |
regulator-name = "CHARGER"; |
| 924 |
regulator-min-microamp = <100000>; |
| 925 |
regulator-max-microamp = <3150000>; |
| 926 |
}; |
| 927 |
}; |
| 928 |
|
| 929 |
haptic: motor-driver { |
| 930 |
compatible = "maxim,max77843-haptic"; |
| 931 |
haptic-supply = <&ldo38_reg>; |
| 932 |
pwms = <&pwm 0 33670 0>; |
| 933 |
}; |
| 934 |
}; |
| 935 |
}; |
| 936 |
|
| 937 |
&hsi2c_11 { |
| 938 |
status = "okay"; |
| 939 |
}; |
| 940 |
|
| 941 |
&i2s0 { |
| 942 |
status = "okay"; |
| 943 |
}; |
| 944 |
|
| 945 |
&i2s1 { |
| 946 |
assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>; |
| 947 |
assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>; |
| 948 |
status = "okay"; |
| 949 |
}; |
| 950 |
|
| 951 |
&mshc_0 { |
| 952 |
status = "okay"; |
| 953 |
mmc-ddr-1_8v; |
| 954 |
mmc-hs200-1_8v; |
| 955 |
mmc-hs400-1_8v; |
| 956 |
cap-mmc-highspeed; |
| 957 |
non-removable; |
| 958 |
card-detect-delay = <200>; |
| 959 |
samsung,dw-mshc-ciu-div = <3>; |
| 960 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 961 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 962 |
samsung,dw-mshc-hs400-timing = <0 3>; |
| 963 |
samsung,read-strobe-delay = <90>; |
| 964 |
fifo-depth = <0x80>; |
| 965 |
pinctrl-names = "default"; |
| 966 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 |
| 967 |
&sd0_bus8 &sd0_rdqs>; |
| 968 |
bus-width = <8>; |
| 969 |
assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; |
| 970 |
assigned-clock-rates = <800000000>; |
| 971 |
}; |
| 972 |
|
| 973 |
&mshc_2 { |
| 974 |
status = "okay"; |
| 975 |
cap-sd-highspeed; |
| 976 |
disable-wp; |
| 977 |
cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>; |
| 978 |
card-detect-delay = <200>; |
| 979 |
samsung,dw-mshc-ciu-div = <3>; |
| 980 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 981 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 982 |
fifo-depth = <0x80>; |
| 983 |
pinctrl-names = "default"; |
| 984 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; |
| 985 |
bus-width = <4>; |
| 986 |
}; |
| 987 |
|
| 988 |
&pcie { |
| 989 |
status = "okay"; |
| 990 |
pinctrl-names = "default"; |
| 991 |
pinctrl-0 = <&pcie_bus &pcie_wlanen>; |
| 992 |
vdd10-supply = <&ldo6_reg>; |
| 993 |
vdd18-supply = <&ldo7_reg>; |
| 994 |
assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>, |
| 995 |
<&cmu_top CLK_MOUT_SCLK_PCIE_100>; |
| 996 |
assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>, |
| 997 |
<&cmu_top CLK_MOUT_BUS_PLL_USER>; |
| 998 |
assigned-clock-rates = <0>, <100000000>; |
| 999 |
interrupt-map-mask = <0 0 0 0>; |
| 1000 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; |
| 1001 |
}; |
| 1002 |
|
| 1003 |
&pcie_phy { |
| 1004 |
status = "okay"; |
| 1005 |
}; |
| 1006 |
|
| 1007 |
&ppmu_d0_general { |
| 1008 |
status = "okay"; |
| 1009 |
events { |
| 1010 |
ppmu_event0_d0_general: ppmu-event0-d0-general { |
| 1011 |
event-name = "ppmu-event0-d0-general"; |
| 1012 |
}; |
| 1013 |
}; |
| 1014 |
}; |
| 1015 |
|
| 1016 |
&ppmu_d1_general { |
| 1017 |
status = "okay"; |
| 1018 |
events { |
| 1019 |
ppmu_event0_d1_general: ppmu-event0-d1-general { |
| 1020 |
event-name = "ppmu-event0-d1-general"; |
| 1021 |
}; |
| 1022 |
}; |
| 1023 |
}; |
| 1024 |
|
| 1025 |
&pinctrl_alive { |
| 1026 |
pinctrl-names = "default"; |
| 1027 |
pinctrl-0 = <&initial_alive>; |
| 1028 |
|
| 1029 |
initial_alive: initial-state { |
| 1030 |
PIN_IN(gpa0-0, DOWN, FAST_SR1); |
| 1031 |
PIN_IN(gpa0-1, NONE, FAST_SR1); |
| 1032 |
PIN_IN(gpa0-2, DOWN, FAST_SR1); |
| 1033 |
PIN_IN(gpa0-3, NONE, FAST_SR1); |
| 1034 |
PIN_IN(gpa0-4, NONE, FAST_SR1); |
| 1035 |
PIN_IN(gpa0-5, DOWN, FAST_SR1); |
| 1036 |
PIN_IN(gpa0-6, NONE, FAST_SR1); |
| 1037 |
PIN_IN(gpa0-7, NONE, FAST_SR1); |
| 1038 |
|
| 1039 |
PIN_IN(gpa1-0, UP, FAST_SR1); |
| 1040 |
PIN_IN(gpa1-1, UP, FAST_SR1); |
| 1041 |
PIN_IN(gpa1-2, NONE, FAST_SR1); |
| 1042 |
PIN_IN(gpa1-3, DOWN, FAST_SR1); |
| 1043 |
PIN_IN(gpa1-4, DOWN, FAST_SR1); |
| 1044 |
PIN_IN(gpa1-5, NONE, FAST_SR1); |
| 1045 |
PIN_IN(gpa1-6, NONE, FAST_SR1); |
| 1046 |
PIN_IN(gpa1-7, NONE, FAST_SR1); |
| 1047 |
|
| 1048 |
PIN_IN(gpa2-0, NONE, FAST_SR1); |
| 1049 |
PIN_IN(gpa2-1, NONE, FAST_SR1); |
| 1050 |
PIN_IN(gpa2-2, NONE, FAST_SR1); |
| 1051 |
PIN_IN(gpa2-3, DOWN, FAST_SR1); |
| 1052 |
PIN_IN(gpa2-4, NONE, FAST_SR1); |
| 1053 |
PIN_IN(gpa2-5, DOWN, FAST_SR1); |
| 1054 |
PIN_IN(gpa2-6, DOWN, FAST_SR1); |
| 1055 |
PIN_IN(gpa2-7, NONE, FAST_SR1); |
| 1056 |
|
| 1057 |
PIN_IN(gpa3-0, DOWN, FAST_SR1); |
| 1058 |
PIN_IN(gpa3-1, DOWN, FAST_SR1); |
| 1059 |
PIN_IN(gpa3-2, NONE, FAST_SR1); |
| 1060 |
PIN_IN(gpa3-3, DOWN, FAST_SR1); |
| 1061 |
PIN_IN(gpa3-4, NONE, FAST_SR1); |
| 1062 |
PIN_IN(gpa3-5, DOWN, FAST_SR1); |
| 1063 |
PIN_IN(gpa3-6, DOWN, FAST_SR1); |
| 1064 |
PIN_IN(gpa3-7, DOWN, FAST_SR1); |
| 1065 |
|
| 1066 |
PIN_IN(gpf1-0, NONE, FAST_SR1); |
| 1067 |
PIN_IN(gpf1-1, NONE, FAST_SR1); |
| 1068 |
PIN_IN(gpf1-2, DOWN, FAST_SR1); |
| 1069 |
PIN_IN(gpf1-4, UP, FAST_SR1); |
| 1070 |
PIN_OT(gpf1-5, NONE, FAST_SR1); |
| 1071 |
PIN_IN(gpf1-6, DOWN, FAST_SR1); |
| 1072 |
PIN_IN(gpf1-7, DOWN, FAST_SR1); |
| 1073 |
|
| 1074 |
PIN_IN(gpf2-0, DOWN, FAST_SR1); |
| 1075 |
PIN_IN(gpf2-1, DOWN, FAST_SR1); |
| 1076 |
PIN_IN(gpf2-2, DOWN, FAST_SR1); |
| 1077 |
PIN_IN(gpf2-3, DOWN, FAST_SR1); |
| 1078 |
|
| 1079 |
PIN_IN(gpf3-0, DOWN, FAST_SR1); |
| 1080 |
PIN_IN(gpf3-1, DOWN, FAST_SR1); |
| 1081 |
PIN_IN(gpf3-2, NONE, FAST_SR1); |
| 1082 |
PIN_IN(gpf3-3, DOWN, FAST_SR1); |
| 1083 |
|
| 1084 |
PIN_IN(gpf4-0, DOWN, FAST_SR1); |
| 1085 |
PIN_IN(gpf4-1, DOWN, FAST_SR1); |
| 1086 |
PIN_IN(gpf4-2, DOWN, FAST_SR1); |
| 1087 |
PIN_IN(gpf4-3, DOWN, FAST_SR1); |
| 1088 |
PIN_IN(gpf4-4, DOWN, FAST_SR1); |
| 1089 |
PIN_IN(gpf4-5, DOWN, FAST_SR1); |
| 1090 |
PIN_IN(gpf4-6, DOWN, FAST_SR1); |
| 1091 |
PIN_IN(gpf4-7, DOWN, FAST_SR1); |
| 1092 |
|
| 1093 |
PIN_IN(gpf5-0, DOWN, FAST_SR1); |
| 1094 |
PIN_IN(gpf5-1, DOWN, FAST_SR1); |
| 1095 |
PIN_IN(gpf5-2, DOWN, FAST_SR1); |
| 1096 |
PIN_IN(gpf5-3, DOWN, FAST_SR1); |
| 1097 |
PIN_OT(gpf5-4, NONE, FAST_SR1); |
| 1098 |
PIN_IN(gpf5-5, DOWN, FAST_SR1); |
| 1099 |
PIN_IN(gpf5-6, DOWN, FAST_SR1); |
| 1100 |
PIN_IN(gpf5-7, DOWN, FAST_SR1); |
| 1101 |
}; |
| 1102 |
|
| 1103 |
te_irq: te-irq-pins { |
| 1104 |
samsung,pins = "gpf1-3"; |
| 1105 |
samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; |
| 1106 |
}; |
| 1107 |
}; |
| 1108 |
|
| 1109 |
&pinctrl_cpif { |
| 1110 |
pinctrl-names = "default"; |
| 1111 |
pinctrl-0 = <&initial_cpif>; |
| 1112 |
|
| 1113 |
initial_cpif: initial-state { |
| 1114 |
PIN_IN(gpv6-0, DOWN, FAST_SR1); |
| 1115 |
PIN_IN(gpv6-1, DOWN, FAST_SR1); |
| 1116 |
}; |
| 1117 |
}; |
| 1118 |
|
| 1119 |
&pinctrl_ese { |
| 1120 |
pinctrl-names = "default"; |
| 1121 |
pinctrl-0 = <&initial_ese>; |
| 1122 |
|
| 1123 |
pcie_wlanen: pcie-wlanen-pins { |
| 1124 |
samsung,pins = "gpj2-0"; |
| 1125 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 1126 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 1127 |
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; |
| 1128 |
}; |
| 1129 |
|
| 1130 |
initial_ese: initial-state { |
| 1131 |
PIN_IN(gpj2-1, DOWN, FAST_SR1); |
| 1132 |
PIN_IN(gpj2-2, DOWN, FAST_SR1); |
| 1133 |
}; |
| 1134 |
}; |
| 1135 |
|
| 1136 |
&pinctrl_fsys { |
| 1137 |
pinctrl-names = "default"; |
| 1138 |
pinctrl-0 = <&initial_fsys>; |
| 1139 |
|
| 1140 |
initial_fsys: initial-state { |
| 1141 |
PIN_IN(gpr3-0, NONE, FAST_SR1); |
| 1142 |
PIN_IN(gpr3-1, DOWN, FAST_SR1); |
| 1143 |
PIN_IN(gpr3-2, DOWN, FAST_SR1); |
| 1144 |
PIN_IN(gpr3-3, DOWN, FAST_SR1); |
| 1145 |
PIN_IN(gpr3-7, NONE, FAST_SR1); |
| 1146 |
}; |
| 1147 |
}; |
| 1148 |
|
| 1149 |
&pinctrl_imem { |
| 1150 |
pinctrl-names = "default"; |
| 1151 |
pinctrl-0 = <&initial_imem>; |
| 1152 |
|
| 1153 |
initial_imem: initial-state { |
| 1154 |
PIN_IN(gpf0-0, UP, FAST_SR1); |
| 1155 |
PIN_IN(gpf0-1, UP, FAST_SR1); |
| 1156 |
PIN_IN(gpf0-2, DOWN, FAST_SR1); |
| 1157 |
PIN_IN(gpf0-3, UP, FAST_SR1); |
| 1158 |
PIN_IN(gpf0-4, DOWN, FAST_SR1); |
| 1159 |
PIN_IN(gpf0-5, NONE, FAST_SR1); |
| 1160 |
PIN_IN(gpf0-6, DOWN, FAST_SR1); |
| 1161 |
PIN_IN(gpf0-7, UP, FAST_SR1); |
| 1162 |
}; |
| 1163 |
}; |
| 1164 |
|
| 1165 |
&pinctrl_nfc { |
| 1166 |
pinctrl-names = "default"; |
| 1167 |
pinctrl-0 = <&initial_nfc>; |
| 1168 |
|
| 1169 |
initial_nfc: initial-state { |
| 1170 |
PIN_IN(gpj0-2, DOWN, FAST_SR1); |
| 1171 |
}; |
| 1172 |
}; |
| 1173 |
|
| 1174 |
&pinctrl_peric { |
| 1175 |
pinctrl-names = "default"; |
| 1176 |
pinctrl-0 = <&initial_peric>; |
| 1177 |
|
| 1178 |
initial_peric: initial-state { |
| 1179 |
PIN_IN(gpv7-0, DOWN, FAST_SR1); |
| 1180 |
PIN_IN(gpv7-1, DOWN, FAST_SR1); |
| 1181 |
PIN_IN(gpv7-2, NONE, FAST_SR1); |
| 1182 |
PIN_IN(gpv7-3, DOWN, FAST_SR1); |
| 1183 |
PIN_IN(gpv7-4, DOWN, FAST_SR1); |
| 1184 |
PIN_IN(gpv7-5, DOWN, FAST_SR1); |
| 1185 |
|
| 1186 |
PIN_IN(gpb0-4, DOWN, FAST_SR1); |
| 1187 |
|
| 1188 |
PIN_IN(gpc0-2, DOWN, FAST_SR1); |
| 1189 |
PIN_IN(gpc0-5, DOWN, FAST_SR1); |
| 1190 |
PIN_IN(gpc0-7, DOWN, FAST_SR1); |
| 1191 |
|
| 1192 |
PIN_IN(gpc1-1, DOWN, FAST_SR1); |
| 1193 |
|
| 1194 |
PIN_IN(gpc3-4, NONE, FAST_SR1); |
| 1195 |
PIN_IN(gpc3-5, NONE, FAST_SR1); |
| 1196 |
PIN_IN(gpc3-6, NONE, FAST_SR1); |
| 1197 |
PIN_IN(gpc3-7, NONE, FAST_SR1); |
| 1198 |
|
| 1199 |
PIN_OT(gpg0-0, NONE, FAST_SR1); |
| 1200 |
PIN_F2(gpg0-1, DOWN, FAST_SR1); |
| 1201 |
|
| 1202 |
PIN_IN(gpd2-5, DOWN, FAST_SR1); |
| 1203 |
|
| 1204 |
PIN_IN(gpd4-0, NONE, FAST_SR1); |
| 1205 |
PIN_IN(gpd4-1, DOWN, FAST_SR1); |
| 1206 |
PIN_IN(gpd4-2, DOWN, FAST_SR1); |
| 1207 |
PIN_IN(gpd4-3, DOWN, FAST_SR1); |
| 1208 |
PIN_IN(gpd4-4, DOWN, FAST_SR1); |
| 1209 |
|
| 1210 |
PIN_IN(gpd6-3, DOWN, FAST_SR1); |
| 1211 |
|
| 1212 |
PIN_IN(gpd8-1, UP, FAST_SR1); |
| 1213 |
|
| 1214 |
PIN_IN(gpg1-0, DOWN, FAST_SR1); |
| 1215 |
PIN_IN(gpg1-1, DOWN, FAST_SR1); |
| 1216 |
PIN_IN(gpg1-2, DOWN, FAST_SR1); |
| 1217 |
PIN_IN(gpg1-3, DOWN, FAST_SR1); |
| 1218 |
PIN_IN(gpg1-4, DOWN, FAST_SR1); |
| 1219 |
|
| 1220 |
PIN_IN(gpg2-0, DOWN, FAST_SR1); |
| 1221 |
PIN_IN(gpg2-1, DOWN, FAST_SR1); |
| 1222 |
|
| 1223 |
PIN_IN(gpg3-0, DOWN, FAST_SR1); |
| 1224 |
PIN_IN(gpg3-1, DOWN, FAST_SR1); |
| 1225 |
PIN_IN(gpg3-5, DOWN, FAST_SR1); |
| 1226 |
}; |
| 1227 |
}; |
| 1228 |
|
| 1229 |
&pinctrl_touch { |
| 1230 |
pinctrl-names = "default"; |
| 1231 |
pinctrl-0 = <&initial_touch>; |
| 1232 |
|
| 1233 |
initial_touch: initial-state { |
| 1234 |
PIN_IN(gpj1-2, DOWN, FAST_SR1); |
| 1235 |
}; |
| 1236 |
}; |
| 1237 |
|
| 1238 |
&pwm { |
| 1239 |
pinctrl-0 = <&pwm0_out>; |
| 1240 |
pinctrl-names = "default"; |
| 1241 |
status = "okay"; |
| 1242 |
}; |
| 1243 |
|
| 1244 |
&mic { |
| 1245 |
status = "okay"; |
| 1246 |
}; |
| 1247 |
|
| 1248 |
&pmu_system_controller { |
| 1249 |
assigned-clocks = <&pmu_system_controller 0>; |
| 1250 |
assigned-clock-parents = <&xxti>; |
| 1251 |
}; |
| 1252 |
|
| 1253 |
&serial_1 { |
| 1254 |
status = "okay"; |
| 1255 |
}; |
| 1256 |
|
| 1257 |
&serial_3 { |
| 1258 |
status = "okay"; |
| 1259 |
|
| 1260 |
bluetooth { |
| 1261 |
compatible = "brcm,bcm43438-bt"; |
| 1262 |
max-speed = <3000000>; |
| 1263 |
shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>; |
| 1264 |
device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>; |
| 1265 |
host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>; |
| 1266 |
clocks = <&s2mps13_osc S2MPS11_CLK_BT>; |
| 1267 |
clock-names = "extclk"; |
| 1268 |
}; |
| 1269 |
}; |
| 1270 |
|
| 1271 |
&spi_1 { |
| 1272 |
cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; |
| 1273 |
status = "okay"; |
| 1274 |
|
| 1275 |
wm5110: audio-codec@0 { |
| 1276 |
compatible = "wlf,wm5110"; |
| 1277 |
reg = <0x0>; |
| 1278 |
spi-max-frequency = <20000000>; |
| 1279 |
interrupt-parent = <&gpa0>; |
| 1280 |
interrupts = <4 IRQ_TYPE_NONE>; |
| 1281 |
clocks = <&pmu_system_controller 0>, |
| 1282 |
<&s2mps13_osc S2MPS11_CLK_BT>; |
| 1283 |
clock-names = "mclk1", "mclk2"; |
| 1284 |
|
| 1285 |
gpio-controller; |
| 1286 |
#gpio-cells = <2>; |
| 1287 |
interrupt-controller; |
| 1288 |
#interrupt-cells = <2>; |
| 1289 |
|
| 1290 |
wlf,micd-detect-debounce = <300>; |
| 1291 |
wlf,micd-bias-start-time = <0x1>; |
| 1292 |
wlf,micd-rate = <0x7>; |
| 1293 |
wlf,micd-dbtime = <0x2>; |
| 1294 |
wlf,micd-force-micbias; |
| 1295 |
wlf,micd-configs = <0x0 1 0>; |
| 1296 |
wlf,hpdet-channel = <1>; |
| 1297 |
wlf,gpsw = <0x1>; |
| 1298 |
wlf,inmode = <2 0 2 0>; |
| 1299 |
|
| 1300 |
wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; |
| 1301 |
wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; |
| 1302 |
|
| 1303 |
/* core supplies */ |
| 1304 |
AVDD-supply = <&ldo18_reg>; |
| 1305 |
DBVDD1-supply = <&ldo18_reg>; |
| 1306 |
CPVDD-supply = <&ldo18_reg>; |
| 1307 |
DBVDD2-supply = <&ldo18_reg>; |
| 1308 |
DBVDD3-supply = <&ldo18_reg>; |
| 1309 |
SPKVDDL-supply = <&vph_pwr_regulator>; |
| 1310 |
SPKVDDR-supply = <&vph_pwr_regulator>; |
| 1311 |
|
| 1312 |
controller-data { |
| 1313 |
samsung,spi-feedback-delay = <0>; |
| 1314 |
}; |
| 1315 |
}; |
| 1316 |
}; |
| 1317 |
|
| 1318 |
&spi_3 { |
| 1319 |
status = "okay"; |
| 1320 |
no-cs-readback; |
| 1321 |
|
| 1322 |
irled@0 { |
| 1323 |
compatible = "ir-spi-led"; |
| 1324 |
reg = <0x0>; |
| 1325 |
spi-max-frequency = <5000000>; |
| 1326 |
power-supply = <&irda_regulator>; |
| 1327 |
duty-cycle = /bits/ 8 <60>; |
| 1328 |
led-active-low; |
| 1329 |
|
| 1330 |
controller-data { |
| 1331 |
samsung,spi-feedback-delay = <0>; |
| 1332 |
}; |
| 1333 |
}; |
| 1334 |
}; |
| 1335 |
|
| 1336 |
&timer { |
| 1337 |
clock-frequency = <24000000>; |
| 1338 |
}; |
| 1339 |
|
| 1340 |
&tmu_atlas0 { |
| 1341 |
vtmu-supply = <&ldo3_reg>; |
| 1342 |
status = "okay"; |
| 1343 |
}; |
| 1344 |
|
| 1345 |
&tmu_apollo { |
| 1346 |
vtmu-supply = <&ldo3_reg>; |
| 1347 |
status = "okay"; |
| 1348 |
}; |
| 1349 |
|
| 1350 |
&tmu_g3d { |
| 1351 |
vtmu-supply = <&ldo3_reg>; |
| 1352 |
status = "okay"; |
| 1353 |
}; |
| 1354 |
|
| 1355 |
&usbdrd30 { |
| 1356 |
vdd33-supply = <&ldo10_reg>; |
| 1357 |
vdd10-supply = <&ldo6_reg>; |
| 1358 |
status = "okay"; |
| 1359 |
}; |
| 1360 |
|
| 1361 |
&usbdrd_dwc3 { |
| 1362 |
dr_mode = "otg"; |
| 1363 |
}; |
| 1364 |
|
| 1365 |
&usbdrd30_phy { |
| 1366 |
vbus-supply = <&safeout1_reg>; |
| 1367 |
status = "okay"; |
| 1368 |
|
| 1369 |
port { |
| 1370 |
usb_to_muic: endpoint { |
| 1371 |
remote-endpoint = <&muic_to_usb>; |
| 1372 |
}; |
| 1373 |
}; |
| 1374 |
}; |
| 1375 |
|
| 1376 |
&xxti { |
| 1377 |
clock-frequency = <24000000>; |
| 1378 |
}; |