Debian Codegraph @

scripts/dtc/include-prefixes/arm64/exynos/exynos2200-g0s.dts

raw
1 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
2 /*
3 * Samsung Galaxy S22+ (g0s/SM-S906B) device tree source
4 *
5 * Copyright (c) 2025, Ivaylo Ivanov <[email protected]>
6 */
7
8 /dts-v1/;
9 #include "exynos2200.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
13
14 / {
15 model = "Samsung Galaxy S22+ (SM-S906B)";
16 compatible = "samsung,g0s", "samsung,exynos2200";
17 chassis-type = "handset";
18
19 chosen {
20 #address-cells = <2>;
21 #size-cells = <2>;
22 ranges;
23
24 framebuffer: framebuffer {
25 compatible = "simple-framebuffer";
26 memory-region = <&cont_splash_mem>;
27 width = <1080>;
28 height = <2340>;
29 stride = <(1080 * 4)>;
30 format = "a8r8g8b8";
31 };
32 };
33
34 /*
35 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
36 *
37 * TODO: Remove this once RTC clock is implemented properly as part of
38 * PMIC driver.
39 */
40 rtcclk: clock-rtcclk {
41 compatible = "fixed-clock";
42 clock-output-names = "rtcclk";
43 #clock-cells = <0>;
44 clock-frequency = <32768>;
45 };
46
47 gpio-keys {
48 compatible = "gpio-keys";
49
50 pinctrl-0 = <&key_volup>;
51 pinctrl-names = "default";
52
53 volup-key {
54 label = "Volume Up";
55 linux,code = <KEY_VOLUMEUP>;
56 gpios = <&gpa3 0 GPIO_ACTIVE_LOW>;
57 wakeup-source;
58 };
59 };
60
61 memory@80000000 {
62 device_type = "memory";
63 reg = <0x0 0x80000000 0x0 0x80000000>,
64 <0x8 0x80000000 0x1 0x7e000000>;
65 };
66
67 /* TODO: Remove this once PMIC is implemented */
68 reg_dummy: regulator-0 {
69 compatible = "regulator-fixed";
70 regulator-name = "dummy_reg";
71 };
72
73 reserved-memory {
74 #address-cells = <2>;
75 #size-cells = <2>;
76 ranges;
77
78 cont_splash_mem: framebuffer@f6200000 {
79 reg = <0x0 0xf6200000 0x0 (1080 * 2340 * 4)>;
80 no-map;
81 };
82
83 debug_kinfo_reserved: debug-kinfo-reserved@fcfff000 {
84 reg = <0x0 0xfcfff000 0x0 0x1000>;
85 no-map;
86 };
87
88 log_itmon: log-itmon@fffe0000 {
89 reg = <0x0 0xfffe0000 0x0 0x20000>;
90 no-map;
91 };
92 };
93 };
94
95 &cmu_hsi0 {
96 clocks = <&xtcxo>,
97 <&rtcclk>,
98 <&cmu_top CLK_DOUT_CMU_HSI0_NOC>,
99 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
100 <&cmu_top CLK_DOUT_CMU_HSI0_DPOSC>,
101 <&cmu_top CLK_DOUT_CMU_HSI0_USB32DRD>;
102 clock-names = "oscclk", "rtcclk", "noc", "dpgtc", "dposc", "usb";
103 };
104
105 /*
106 * cpu2 and cpu3 fail to come up consistently, which leads to a hang later
107 * in the boot process. Disable them until the issue is figured out.
108 */
109 &cpu2 {
110 status = "fail";
111 };
112
113 &cpu3 {
114 status = "fail";
115 };
116
117 &ext_26m {
118 clock-frequency = <26000000>;
119 };
120
121 &ext_200m {
122 clock-frequency = <200000000>;
123 };
124
125 &mct_peris {
126 status = "okay";
127 };
128
129 &pinctrl_alive {
130 key_volup: key-volup-pins {
131 samsung,pins = "gpa3-0";
132 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
133 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
134 samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
135 };
136 };
137
138 &ppi_cluster0 {
139 affinity = <&cpu0 &cpu1>;
140 };
141
142 &usb {
143 /* TODO: Replace these once PMIC is implemented */
144 vdd10-supply = <&reg_dummy>;
145 vdd33-supply = <&reg_dummy>;
146 status = "okay";
147 };
148
149 &usb32drd {
150 status = "okay";
151 };
152
153 &usb_dwc3 {
154 dr_mode = "otg";
155 usb-role-switch;
156 role-switch-default-mode = "peripheral";
157 maximum-speed = "high-speed";
158 };
159
160 &usb_hsphy {
161 /* TODO: Replace these once PMIC is implemented */
162 vdda12-supply = <&reg_dummy>;
163 vdd-supply = <&reg_dummy>;
164 status = "okay";
165 };
166
167 &xtcxo {
168 clock-frequency = <76800000>;
169 };