| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2019 Linaro Ltd. |
| 4 |
* Author: Manivannan Sadhasivam <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/clock/bm1880-clock.h> |
| 8 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 9 |
#include <dt-bindings/reset/bitmain,bm1880-reset.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "bitmain,bm1880"; |
| 13 |
interrupt-parent = <&gic>; |
| 14 |
#address-cells = <2>; |
| 15 |
#size-cells = <2>; |
| 16 |
|
| 17 |
cpus { |
| 18 |
#address-cells = <1>; |
| 19 |
#size-cells = <0>; |
| 20 |
|
| 21 |
cpu0: cpu@0 { |
| 22 |
device_type = "cpu"; |
| 23 |
compatible = "arm,cortex-a53"; |
| 24 |
reg = <0x0>; |
| 25 |
enable-method = "psci"; |
| 26 |
}; |
| 27 |
|
| 28 |
cpu1: cpu@1 { |
| 29 |
device_type = "cpu"; |
| 30 |
compatible = "arm,cortex-a53"; |
| 31 |
reg = <0x1>; |
| 32 |
enable-method = "psci"; |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
reserved-memory { |
| 37 |
#address-cells = <2>; |
| 38 |
#size-cells = <2>; |
| 39 |
ranges; |
| 40 |
|
| 41 |
secmon@100000000 { |
| 42 |
reg = <0x1 0x00000000 0x0 0x20000>; |
| 43 |
no-map; |
| 44 |
}; |
| 45 |
|
| 46 |
jpu@130000000 { |
| 47 |
reg = <0x1 0x30000000 0x0 0x08000000>; // 128M |
| 48 |
no-map; |
| 49 |
}; |
| 50 |
|
| 51 |
vpu@138000000 { |
| 52 |
reg = <0x1 0x38000000 0x0 0x08000000>; // 128M |
| 53 |
no-map; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
psci { |
| 58 |
compatible = "arm,psci-0.2"; |
| 59 |
method = "smc"; |
| 60 |
}; |
| 61 |
|
| 62 |
timer { |
| 63 |
compatible = "arm,armv8-timer"; |
| 64 |
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| 65 |
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| 66 |
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| 67 |
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; |
| 68 |
}; |
| 69 |
|
| 70 |
osc: osc { |
| 71 |
compatible = "fixed-clock"; |
| 72 |
clock-frequency = <25000000>; |
| 73 |
#clock-cells = <0>; |
| 74 |
}; |
| 75 |
|
| 76 |
soc { |
| 77 |
compatible = "simple-bus"; |
| 78 |
#address-cells = <2>; |
| 79 |
#size-cells = <2>; |
| 80 |
ranges; |
| 81 |
|
| 82 |
gic: interrupt-controller@50001000 { |
| 83 |
compatible = "arm,gic-400"; |
| 84 |
reg = <0x0 0x50001000 0x0 0x1000>, |
| 85 |
<0x0 0x50002000 0x0 0x2000>; |
| 86 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; |
| 87 |
interrupt-controller; |
| 88 |
#interrupt-cells = <3>; |
| 89 |
}; |
| 90 |
|
| 91 |
sctrl: system-controller@50010000 { |
| 92 |
compatible = "bitmain,bm1880-sctrl", "syscon", |
| 93 |
"simple-mfd"; |
| 94 |
reg = <0x0 0x50010000 0x0 0x1000>; |
| 95 |
#address-cells = <1>; |
| 96 |
#size-cells = <1>; |
| 97 |
ranges = <0x0 0x0 0x50010000 0x1000>; |
| 98 |
|
| 99 |
pinctrl: pinctrl@400 { |
| 100 |
compatible = "bitmain,bm1880-pinctrl"; |
| 101 |
reg = <0x400 0x120>; |
| 102 |
}; |
| 103 |
|
| 104 |
clk: clock-controller@e8 { |
| 105 |
compatible = "bitmain,bm1880-clk"; |
| 106 |
reg = <0xe8 0x0c>, <0x800 0xb0>; |
| 107 |
reg-names = "pll", "sys"; |
| 108 |
clocks = <&osc>; |
| 109 |
clock-names = "osc"; |
| 110 |
#clock-cells = <1>; |
| 111 |
}; |
| 112 |
|
| 113 |
rst: reset-controller@c00 { |
| 114 |
compatible = "bitmain,bm1880-reset"; |
| 115 |
reg = <0xc00 0x8>; |
| 116 |
#reset-cells = <1>; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
gpio0: gpio@50027000 { |
| 121 |
#address-cells = <1>; |
| 122 |
#size-cells = <0>; |
| 123 |
compatible = "snps,dw-apb-gpio"; |
| 124 |
reg = <0x0 0x50027000 0x0 0x400>; |
| 125 |
|
| 126 |
porta: gpio-controller@0 { |
| 127 |
compatible = "snps,dw-apb-gpio-port"; |
| 128 |
gpio-controller; |
| 129 |
#gpio-cells = <2>; |
| 130 |
ngpios = <32>; |
| 131 |
reg = <0>; |
| 132 |
interrupt-controller; |
| 133 |
#interrupt-cells = <2>; |
| 134 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
gpio1: gpio@50027400 { |
| 139 |
#address-cells = <1>; |
| 140 |
#size-cells = <0>; |
| 141 |
compatible = "snps,dw-apb-gpio"; |
| 142 |
reg = <0x0 0x50027400 0x0 0x400>; |
| 143 |
|
| 144 |
portb: gpio-controller@0 { |
| 145 |
compatible = "snps,dw-apb-gpio-port"; |
| 146 |
gpio-controller; |
| 147 |
#gpio-cells = <2>; |
| 148 |
ngpios = <32>; |
| 149 |
reg = <0>; |
| 150 |
interrupt-controller; |
| 151 |
#interrupt-cells = <2>; |
| 152 |
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
gpio2: gpio@50027800 { |
| 157 |
#address-cells = <1>; |
| 158 |
#size-cells = <0>; |
| 159 |
compatible = "snps,dw-apb-gpio"; |
| 160 |
reg = <0x0 0x50027800 0x0 0x400>; |
| 161 |
|
| 162 |
portc: gpio-controller@0 { |
| 163 |
compatible = "snps,dw-apb-gpio-port"; |
| 164 |
gpio-controller; |
| 165 |
#gpio-cells = <2>; |
| 166 |
ngpios = <8>; |
| 167 |
reg = <0>; |
| 168 |
interrupt-controller; |
| 169 |
#interrupt-cells = <2>; |
| 170 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
uart0: serial@58018000 { |
| 175 |
compatible = "snps,dw-apb-uart"; |
| 176 |
reg = <0x0 0x58018000 0x0 0x2000>; |
| 177 |
clocks = <&clk BM1880_CLK_UART_500M>, |
| 178 |
<&clk BM1880_CLK_APB_UART>; |
| 179 |
clock-names = "baudclk", "apb_pclk"; |
| 180 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 181 |
reg-shift = <2>; |
| 182 |
reg-io-width = <4>; |
| 183 |
resets = <&rst BM1880_RST_UART0_1_CLK>; |
| 184 |
status = "disabled"; |
| 185 |
}; |
| 186 |
|
| 187 |
uart1: serial@5801a000 { |
| 188 |
compatible = "snps,dw-apb-uart"; |
| 189 |
reg = <0x0 0x5801a000 0x0 0x2000>; |
| 190 |
clocks = <&clk BM1880_CLK_UART_500M>, |
| 191 |
<&clk BM1880_CLK_APB_UART>; |
| 192 |
clock-names = "baudclk", "apb_pclk"; |
| 193 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 194 |
reg-shift = <2>; |
| 195 |
reg-io-width = <4>; |
| 196 |
resets = <&rst BM1880_RST_UART0_1_ACLK>; |
| 197 |
status = "disabled"; |
| 198 |
}; |
| 199 |
|
| 200 |
uart2: serial@5801c000 { |
| 201 |
compatible = "snps,dw-apb-uart"; |
| 202 |
reg = <0x0 0x5801c000 0x0 0x2000>; |
| 203 |
clocks = <&clk BM1880_CLK_UART_500M>, |
| 204 |
<&clk BM1880_CLK_APB_UART>; |
| 205 |
clock-names = "baudclk", "apb_pclk"; |
| 206 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 207 |
reg-shift = <2>; |
| 208 |
reg-io-width = <4>; |
| 209 |
resets = <&rst BM1880_RST_UART2_3_CLK>; |
| 210 |
status = "disabled"; |
| 211 |
}; |
| 212 |
|
| 213 |
uart3: serial@5801e000 { |
| 214 |
compatible = "snps,dw-apb-uart"; |
| 215 |
reg = <0x0 0x5801e000 0x0 0x2000>; |
| 216 |
clocks = <&clk BM1880_CLK_UART_500M>, |
| 217 |
<&clk BM1880_CLK_APB_UART>; |
| 218 |
clock-names = "baudclk", "apb_pclk"; |
| 219 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 220 |
reg-shift = <2>; |
| 221 |
reg-io-width = <4>; |
| 222 |
resets = <&rst BM1880_RST_UART2_3_ACLK>; |
| 223 |
status = "disabled"; |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |