| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
/* |
| 3 |
* Apple T8012 "T2" SoC |
| 4 |
* |
| 5 |
* Other names: H9M, "Gibraltar" |
| 6 |
* |
| 7 |
* Copyright (c) 2024, Nick Chan <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/interrupt-controller/apple-aic.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include <dt-bindings/pinctrl/apple.h> |
| 14 |
#include <dt-bindings/spmi/spmi.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
interrupt-parent = <&aic>; |
| 18 |
#address-cells = <2>; |
| 19 |
#size-cells = <2>; |
| 20 |
|
| 21 |
clkref: clock-ref { |
| 22 |
compatible = "fixed-clock"; |
| 23 |
#clock-cells = <0>; |
| 24 |
clock-frequency = <24000000>; |
| 25 |
clock-output-names = "clkref"; |
| 26 |
}; |
| 27 |
|
| 28 |
cpus { |
| 29 |
#address-cells = <2>; |
| 30 |
#size-cells = <0>; |
| 31 |
|
| 32 |
cpu0: cpu@10000 { |
| 33 |
compatible = "apple,hurricane-zephyr"; |
| 34 |
reg = <0x0 0x10000>; |
| 35 |
cpu-release-addr = <0 0>; /* To be filled by loader */ |
| 36 |
operating-points-v2 = <&fusion_opp>; |
| 37 |
performance-domains = <&cpufreq>; |
| 38 |
enable-method = "spin-table"; |
| 39 |
device_type = "cpu"; |
| 40 |
next-level-cache = <&l2_cache>; |
| 41 |
i-cache-size = <0x10000>; /* P-core */ |
| 42 |
d-cache-size = <0x10000>; /* P-core */ |
| 43 |
}; |
| 44 |
|
| 45 |
cpu1: cpu@10001 { |
| 46 |
compatible = "apple,hurricane-zephyr"; |
| 47 |
reg = <0x0 0x10001>; |
| 48 |
cpu-release-addr = <0 0>; /* To be filled by loader */ |
| 49 |
operating-points-v2 = <&fusion_opp>; |
| 50 |
performance-domains = <&cpufreq>; |
| 51 |
enable-method = "spin-table"; |
| 52 |
device_type = "cpu"; |
| 53 |
next-level-cache = <&l2_cache>; |
| 54 |
i-cache-size = <0x10000>; /* P-core */ |
| 55 |
d-cache-size = <0x10000>; /* P-core */ |
| 56 |
}; |
| 57 |
|
| 58 |
l2_cache: l2-cache { |
| 59 |
compatible = "cache"; |
| 60 |
cache-level = <2>; |
| 61 |
cache-unified; |
| 62 |
cache-size = <0x300000>; /* P-cluster */ |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
fusion_opp: opp-table { |
| 67 |
compatible = "operating-points-v2"; |
| 68 |
|
| 69 |
/* |
| 70 |
* Apple Fusion Architecture: Hardware big.LITTLE switcher |
| 71 |
* that use p-state transitions to switch between cores. |
| 72 |
* Only one type of core can be active at a given time. |
| 73 |
* |
| 74 |
* The E-core frequencies are adjusted so performance scales |
| 75 |
* linearly with reported clock speed. |
| 76 |
*/ |
| 77 |
|
| 78 |
opp01 { |
| 79 |
opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */ |
| 80 |
opp-level = <1>; |
| 81 |
clock-latency-ns = <11000>; |
| 82 |
}; |
| 83 |
opp02 { |
| 84 |
opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */ |
| 85 |
opp-level = <2>; |
| 86 |
clock-latency-ns = <140000>; |
| 87 |
}; |
| 88 |
opp03 { |
| 89 |
opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */ |
| 90 |
opp-level = <3>; |
| 91 |
clock-latency-ns = <110000>; |
| 92 |
}; |
| 93 |
opp04 { |
| 94 |
opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */ |
| 95 |
opp-level = <4>; |
| 96 |
clock-latency-ns = <130000>; |
| 97 |
}; |
| 98 |
opp05 { |
| 99 |
opp-hz = /bits/ 64 <756000000>; |
| 100 |
opp-level = <5>; |
| 101 |
clock-latency-ns = <130000>; |
| 102 |
}; |
| 103 |
opp06 { |
| 104 |
opp-hz = /bits/ 64 <1056000000>; |
| 105 |
opp-level = <6>; |
| 106 |
clock-latency-ns = <130000>; |
| 107 |
}; |
| 108 |
opp07 { |
| 109 |
opp-hz = /bits/ 64 <1356000000>; |
| 110 |
opp-level = <7>; |
| 111 |
clock-latency-ns = <130000>; |
| 112 |
}; |
| 113 |
opp08 { |
| 114 |
opp-hz = /bits/ 64 <1644000000>; |
| 115 |
opp-level = <8>; |
| 116 |
clock-latency-ns = <135000>; |
| 117 |
}; |
| 118 |
opp09 { |
| 119 |
opp-hz = /bits/ 64 <1944000000>; |
| 120 |
opp-level = <9>; |
| 121 |
clock-latency-ns = <140000>; |
| 122 |
}; |
| 123 |
opp10 { |
| 124 |
opp-hz = /bits/ 64 <2244000000>; |
| 125 |
opp-level = <10>; |
| 126 |
clock-latency-ns = <150000>; |
| 127 |
}; |
| 128 |
#if 0 |
| 129 |
/* Not available until CPU deep sleep is implemented */ |
| 130 |
opp11 { |
| 131 |
opp-hz = /bits/ 64 <2340000000>; |
| 132 |
opp-level = <11>; |
| 133 |
clock-latency-ns = <150000>; |
| 134 |
turbo-mode; |
| 135 |
}; |
| 136 |
#endif |
| 137 |
}; |
| 138 |
|
| 139 |
soc { |
| 140 |
compatible = "simple-bus"; |
| 141 |
#address-cells = <2>; |
| 142 |
#size-cells = <2>; |
| 143 |
nonposted-mmio; |
| 144 |
ranges; |
| 145 |
|
| 146 |
cpufreq: performance-controller@202f20000 { |
| 147 |
compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq"; |
| 148 |
reg = <0x2 0x02f20000 0 0x1000>; |
| 149 |
#performance-domain-cells = <0>; |
| 150 |
}; |
| 151 |
|
| 152 |
serial0: serial@20a600000 { |
| 153 |
compatible = "apple,s5l-uart"; |
| 154 |
reg = <0x2 0x0a600000 0x0 0x4000>; |
| 155 |
reg-io-width = <4>; |
| 156 |
interrupt-parent = <&aic>; |
| 157 |
interrupts = <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>; |
| 158 |
/* Use the bootloader-enabled clocks for now. */ |
| 159 |
clocks = <&clkref>, <&clkref>; |
| 160 |
clock-names = "uart", "clk_uart_baud0"; |
| 161 |
power-domains = <&ps_uart0>; |
| 162 |
status = "disabled"; |
| 163 |
}; |
| 164 |
|
| 165 |
pmgr: power-management@20e000000 { |
| 166 |
compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd"; |
| 167 |
#address-cells = <1>; |
| 168 |
#size-cells = <1>; |
| 169 |
|
| 170 |
reg = <0x2 0xe000000 0 0x8c000>; |
| 171 |
}; |
| 172 |
|
| 173 |
aic: interrupt-controller@20e100000 { |
| 174 |
compatible = "apple,t8010-aic", "apple,aic"; |
| 175 |
reg = <0x2 0x0e100000 0x0 0x100000>; |
| 176 |
#interrupt-cells = <3>; |
| 177 |
interrupt-controller; |
| 178 |
power-domains = <&ps_aic>; |
| 179 |
}; |
| 180 |
|
| 181 |
pinctrl_ap: pinctrl@20f100000 { |
| 182 |
compatible = "apple,t8010-pinctrl", "apple,pinctrl"; |
| 183 |
reg = <0x2 0x0f100000 0x0 0x100000>; |
| 184 |
power-domains = <&ps_gpio>; |
| 185 |
|
| 186 |
gpio-controller; |
| 187 |
#gpio-cells = <2>; |
| 188 |
gpio-ranges = <&pinctrl_ap 0 0 221>; |
| 189 |
apple,npins = <221>; |
| 190 |
|
| 191 |
interrupt-controller; |
| 192 |
#interrupt-cells = <2>; |
| 193 |
interrupt-parent = <&aic>; |
| 194 |
interrupts = <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>, |
| 195 |
<AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>, |
| 196 |
<AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>, |
| 197 |
<AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>, |
| 198 |
<AIC_IRQ 49 IRQ_TYPE_LEVEL_HIGH>, |
| 199 |
<AIC_IRQ 50 IRQ_TYPE_LEVEL_HIGH>, |
| 200 |
<AIC_IRQ 51 IRQ_TYPE_LEVEL_HIGH>; |
| 201 |
}; |
| 202 |
|
| 203 |
pinctrl_aop: pinctrl@2100f0000 { |
| 204 |
compatible = "apple,t8010-pinctrl", "apple,pinctrl"; |
| 205 |
reg = <0x2 0x0100f0000 0x0 0x10000>; |
| 206 |
|
| 207 |
gpio-controller; |
| 208 |
#gpio-cells = <2>; |
| 209 |
gpio-ranges = <&pinctrl_aop 0 0 41>; |
| 210 |
apple,npins = <41>; |
| 211 |
|
| 212 |
interrupt-controller; |
| 213 |
#interrupt-cells = <2>; |
| 214 |
interrupt-parent = <&aic>; |
| 215 |
interrupts = <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>, |
| 216 |
<AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>, |
| 217 |
<AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>, |
| 218 |
<AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>, |
| 219 |
<AIC_IRQ 135 IRQ_TYPE_LEVEL_HIGH>, |
| 220 |
<AIC_IRQ 136 IRQ_TYPE_LEVEL_HIGH>, |
| 221 |
<AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>; |
| 222 |
}; |
| 223 |
|
| 224 |
spmi: spmi@211180700 { |
| 225 |
compatible = "apple,t8012-spmi", "apple,t8103-spmi"; |
| 226 |
reg = <0x2 0x11180700 0x0 0x100>; |
| 227 |
#address-cells = <2>; |
| 228 |
#size-cells = <0>; |
| 229 |
}; |
| 230 |
|
| 231 |
pinctrl_nub: pinctrl@2111f0000 { |
| 232 |
compatible = "apple,t8010-pinctrl", "apple,pinctrl"; |
| 233 |
reg = <0x2 0x111f0000 0x0 0x1000>; |
| 234 |
|
| 235 |
gpio-controller; |
| 236 |
#gpio-cells = <2>; |
| 237 |
gpio-ranges = <&pinctrl_nub 0 0 19>; |
| 238 |
apple,npins = <19>; |
| 239 |
|
| 240 |
interrupt-controller; |
| 241 |
#interrupt-cells = <2>; |
| 242 |
interrupt-parent = <&aic>; |
| 243 |
interrupts = <AIC_IRQ 164 IRQ_TYPE_LEVEL_HIGH>, |
| 244 |
<AIC_IRQ 165 IRQ_TYPE_LEVEL_HIGH>, |
| 245 |
<AIC_IRQ 166 IRQ_TYPE_LEVEL_HIGH>; |
| 246 |
}; |
| 247 |
|
| 248 |
pmgr_mini: power-management@211200000 { |
| 249 |
compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd"; |
| 250 |
#address-cells = <1>; |
| 251 |
#size-cells = <1>; |
| 252 |
|
| 253 |
reg = <0x2 0x11200000 0 0x84000>; |
| 254 |
}; |
| 255 |
|
| 256 |
wdt: watchdog@2112b0000 { |
| 257 |
compatible = "apple,t8010-wdt", "apple,wdt"; |
| 258 |
reg = <0x2 0x112b0000 0x0 0x4000>; |
| 259 |
clocks = <&clkref>; |
| 260 |
interrupt-parent = <&aic>; |
| 261 |
interrupts = <AIC_IRQ 168 IRQ_TYPE_LEVEL_HIGH>; |
| 262 |
}; |
| 263 |
|
| 264 |
pinctrl_smc: pinctrl@212024000 { |
| 265 |
compatible = "apple,t8010-pinctrl", "apple,pinctrl"; |
| 266 |
reg = <0x2 0x12024000 0x0 0x1000>; |
| 267 |
power-domains = <&ps_smc_cpu>; |
| 268 |
|
| 269 |
gpio-controller; |
| 270 |
#gpio-cells = <2>; |
| 271 |
gpio-ranges = <&pinctrl_smc 0 0 81>; |
| 272 |
apple,npins = <81>; |
| 273 |
|
| 274 |
interrupt-controller; |
| 275 |
#interrupt-cells = <2>; |
| 276 |
interrupt-parent = <&aic>; |
| 277 |
interrupts = <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>, |
| 278 |
<AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>, |
| 279 |
<AIC_IRQ 197 IRQ_TYPE_LEVEL_HIGH>, |
| 280 |
<AIC_IRQ 198 IRQ_TYPE_LEVEL_HIGH>, |
| 281 |
<AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>, |
| 282 |
<AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>, |
| 283 |
<AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>; |
| 284 |
/* |
| 285 |
* SMC is not yet supported and accessing this pinctrl while SMC is |
| 286 |
* suspended results in a hang. |
| 287 |
*/ |
| 288 |
status = "disabled"; |
| 289 |
}; |
| 290 |
}; |
| 291 |
|
| 292 |
timer { |
| 293 |
compatible = "arm,armv8-timer"; |
| 294 |
interrupt-parent = <&aic>; |
| 295 |
interrupt-names = "phys", "virt"; |
| 296 |
/* Note that T2 doesn't actually have a hypervisor (EL2 is not implemented). */ |
| 297 |
interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>, |
| 298 |
<AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
#include "t8012-pmgr.dtsi" |