Debian Codegraph @

scripts/dtc/include-prefixes/arm64/apple/t8011.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
2 /*
3 * Apple T8011 "A10X" SoC
4 *
5 * Other names: H9G, "Myst"
6 *
7 * Copyright (c) 2022, Konrad Dybcio <[email protected]>
8 */
9
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/apple-aic.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
13 #include <dt-bindings/pinctrl/apple.h>
14
15 / {
16 interrupt-parent = <&aic>;
17 #address-cells = <2>;
18 #size-cells = <2>;
19
20 clkref: clock-ref {
21 compatible = "fixed-clock";
22 #clock-cells = <0>;
23 clock-frequency = <24000000>;
24 clock-output-names = "clkref";
25 };
26
27 cpus {
28 #address-cells = <2>;
29 #size-cells = <0>;
30
31 cpu0: cpu@0 {
32 compatible = "apple,hurricane-zephyr";
33 reg = <0x0 0x0>;
34 cpu-release-addr = <0 0>; /* To be filled by loader */
35 operating-points-v2 = <&fusion_opp>;
36 performance-domains = <&cpufreq>;
37 enable-method = "spin-table";
38 device_type = "cpu";
39 next-level-cache = <&l2_cache>;
40 i-cache-size = <0x10000>; /* P-core */
41 d-cache-size = <0x10000>; /* P-core */
42 };
43
44 cpu1: cpu@1 {
45 compatible = "apple,hurricane-zephyr";
46 reg = <0x0 0x1>;
47 cpu-release-addr = <0 0>; /* To be filled by loader */
48 operating-points-v2 = <&fusion_opp>;
49 performance-domains = <&cpufreq>;
50 enable-method = "spin-table";
51 device_type = "cpu";
52 next-level-cache = <&l2_cache>;
53 i-cache-size = <0x10000>; /* P-core */
54 d-cache-size = <0x10000>; /* P-core */
55 };
56
57 cpu2: cpu@2 {
58 compatible = "apple,hurricane-zephyr";
59 reg = <0x0 0x2>;
60 cpu-release-addr = <0 0>; /* To be filled by loader */
61 operating-points-v2 = <&fusion_opp>;
62 performance-domains = <&cpufreq>;
63 enable-method = "spin-table";
64 device_type = "cpu";
65 next-level-cache = <&l2_cache>;
66 i-cache-size = <0x10000>; /* P-core */
67 d-cache-size = <0x10000>; /* P-core */
68 };
69
70 l2_cache: l2-cache {
71 compatible = "cache";
72 cache-level = <2>;
73 cache-unified;
74 cache-size = <0x800000>; /* P-cluster */
75 };
76 };
77
78 fusion_opp: opp-table {
79 compatible = "operating-points-v2";
80
81 /*
82 * Apple Fusion Architecture: Hardwired big.LITTLE switcher
83 * that use p-state transitions to switch between cores.
84 *
85 * The E-core frequencies are adjusted so performance scales
86 * linearly with reported clock speed.
87 */
88
89 opp01 {
90 opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
91 opp-level = <1>;
92 clock-latency-ns = <12000>;
93 };
94 opp02 {
95 opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
96 opp-level = <2>;
97 clock-latency-ns = <135000>;
98 };
99 opp03 {
100 opp-hz = /bits/ 64 <448000000>; /* 768 MHz, E-core */
101 opp-level = <3>;
102 clock-latency-ns = <105000>;
103 };
104 opp04 {
105 opp-hz = /bits/ 64 <662000000>; /* 1152 MHz, E-core */
106 opp-level = <4>;
107 clock-latency-ns = <115000>;
108 };
109 opp05 {
110 opp-hz = /bits/ 64 <804000000>;
111 opp-level = <5>;
112 clock-latency-ns = <122000>;
113 };
114 opp06 {
115 opp-hz = /bits/ 64 <1140000000>;
116 opp-level = <6>;
117 clock-latency-ns = <120000>;
118 };
119 opp07 {
120 opp-hz = /bits/ 64 <1548000000>;
121 opp-level = <7>;
122 clock-latency-ns = <125000>;
123 };
124 opp08 {
125 opp-hz = /bits/ 64 <1956000000>;
126 opp-level = <8>;
127 clock-latency-ns = <135000>;
128 };
129 opp09 {
130 opp-hz = /bits/ 64 <2316000000>;
131 opp-level = <9>;
132 clock-latency-ns = <140000>;
133 };
134 #if 0
135 /* Not available until CPU deep sleep is implemented */
136 opp10 {
137 opp-hz = /bits/ 64 <2400000000>;
138 opp-level = <10>;
139 clock-latency-ns = <140000>;
140 turbo-mode;
141 };
142 #endif
143 };
144
145 soc {
146 compatible = "simple-bus";
147 #address-cells = <2>;
148 #size-cells = <2>;
149 nonposted-mmio;
150 ranges;
151
152 cpufreq: performance-controller@202f20000 {
153 compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
154 reg = <0x2 0x02f20000 0 0x1000>;
155 #performance-domain-cells = <0>;
156 };
157
158 serial0: serial@20a0c0000 {
159 compatible = "apple,s5l-uart";
160 reg = <0x2 0x0a0c0000 0x0 0x4000>;
161 reg-io-width = <4>;
162 interrupt-parent = <&aic>;
163 interrupts = <AIC_IRQ 216 IRQ_TYPE_LEVEL_HIGH>;
164 /* Use the bootloader-enabled clocks for now. */
165 clocks = <&clkref>, <&clkref>;
166 clock-names = "uart", "clk_uart_baud0";
167 power-domains = <&ps_uart0>;
168 status = "disabled";
169 };
170
171 i2c0: i2c@20a110000 {
172 compatible = "apple,t8010-i2c", "apple,i2c";
173 reg = <0x2 0x0a110000 0x0 0x1000>;
174 clocks = <&clkref>;
175 interrupt-parent = <&aic>;
176 interrupts = <AIC_IRQ 230 IRQ_TYPE_LEVEL_HIGH>;
177 pinctrl-0 = <&i2c0_pins>;
178 pinctrl-names = "default";
179 power-domains = <&ps_i2c0>;
180 #address-cells = <1>;
181 #size-cells = <0>;
182 status = "disabled";
183 };
184
185 i2c1: i2c@20a111000 {
186 compatible = "apple,t8010-i2c", "apple,i2c";
187 reg = <0x2 0x0a111000 0x0 0x1000>;
188 clocks = <&clkref>;
189 interrupt-parent = <&aic>;
190 interrupts = <AIC_IRQ 231 IRQ_TYPE_LEVEL_HIGH>;
191 pinctrl-0 = <&i2c1_pins>;
192 pinctrl-names = "default";
193 power-domains = <&ps_i2c1>;
194 #address-cells = <1>;
195 #size-cells = <0>;
196 status = "disabled";
197 };
198
199 i2c2: i2c@20a112000 {
200 compatible = "apple,t8010-i2c", "apple,i2c";
201 reg = <0x2 0x0a112000 0x0 0x1000>;
202 clocks = <&clkref>;
203 interrupt-parent = <&aic>;
204 interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
205 pinctrl-0 = <&i2c2_pins>;
206 pinctrl-names = "default";
207 power-domains = <&ps_i2c2>;
208 #address-cells = <1>;
209 #size-cells = <0>;
210 status = "disabled";
211 };
212
213 i2c3: i2c@20a113000 {
214 compatible = "apple,t8010-i2c", "apple,i2c";
215 reg = <0x2 0x0a113000 0x0 0x1000>;
216 clocks = <&clkref>;
217 interrupt-parent = <&aic>;
218 interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
219 pinctrl-0 = <&i2c3_pins>;
220 pinctrl-names = "default";
221 power-domains = <&ps_i2c3>;
222 #address-cells = <1>;
223 #size-cells = <0>;
224 status = "disabled";
225 };
226
227 pmgr: power-management@20e000000 {
228 compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
229 #address-cells = <1>;
230 #size-cells = <1>;
231
232 reg = <0x2 0xe000000 0 0x8c000>;
233 };
234
235 aic: interrupt-controller@20e100000 {
236 compatible = "apple,t8010-aic", "apple,aic";
237 reg = <0x2 0x0e100000 0x0 0x100000>;
238 #interrupt-cells = <3>;
239 interrupt-controller;
240 power-domains = <&ps_aic>;
241 };
242
243 pinctrl_ap: pinctrl@20f100000 {
244 compatible = "apple,t8010-pinctrl", "apple,pinctrl";
245 reg = <0x2 0x0f100000 0x0 0x100000>;
246 power-domains = <&ps_gpio>;
247
248 gpio-controller;
249 #gpio-cells = <2>;
250 gpio-ranges = <&pinctrl_ap 0 0 219>;
251 apple,npins = <219>;
252
253 interrupt-controller;
254 #interrupt-cells = <2>;
255 interrupt-parent = <&aic>;
256 interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
257 <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
258 <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
259 <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
260 <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
261 <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
262 <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
263
264 i2c0_pins: i2c0-pins {
265 pinmux = <APPLE_PINMUX(211, 1)>,
266 <APPLE_PINMUX(210, 1)>;
267 };
268
269 i2c1_pins: i2c1-pins {
270 pinmux = <APPLE_PINMUX(156, 1)>,
271 <APPLE_PINMUX(155, 1)>;
272 };
273
274 i2c2_pins: i2c2-pins {
275 pinmux = <APPLE_PINMUX(58, 1)>,
276 <APPLE_PINMUX(57, 1)>;
277 };
278
279 i2c3_pins: i2c3-pins {
280 pinmux = <APPLE_PINMUX(158, 1)>,
281 <APPLE_PINMUX(157, 1)>;
282 };
283 };
284
285 pinctrl_aop: pinctrl@2100f0000 {
286 compatible = "apple,t8010-pinctrl", "apple,pinctrl";
287 reg = <0x2 0x100f0000 0x0 0x100000>;
288 power-domains = <&ps_aop_gpio>;
289
290 gpio-controller;
291 #gpio-cells = <2>;
292 gpio-ranges = <&pinctrl_aop 0 0 42>;
293 apple,npins = <42>;
294
295 interrupt-controller;
296 #interrupt-cells = <2>;
297 interrupt-parent = <&aic>;
298 interrupts = <AIC_IRQ 125 IRQ_TYPE_LEVEL_HIGH>,
299 <AIC_IRQ 126 IRQ_TYPE_LEVEL_HIGH>,
300 <AIC_IRQ 127 IRQ_TYPE_LEVEL_HIGH>,
301 <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
302 <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
303 <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
304 <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>;
305 };
306
307 pmgr_mini: power-management@210200000 {
308 compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
309 #address-cells = <1>;
310 #size-cells = <1>;
311
312 reg = <0x2 0x10200000 0 0x84000>;
313 };
314
315 wdt: watchdog@2102b0000 {
316 compatible = "apple,t8010-wdt", "apple,wdt";
317 reg = <0x2 0x102b0000 0x0 0x4000>;
318 clocks = <&clkref>;
319 interrupt-parent = <&aic>;
320 interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
321 };
322 };
323
324 timer {
325 compatible = "arm,armv8-timer";
326 interrupt-parent = <&aic>;
327 interrupt-names = "phys", "virt";
328 /* Note that A10X doesn't actually have a hypervisor (EL2 is not implemented). */
329 interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
330 <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
331 };
332 };
333
334 #include "t8011-pmgr.dtsi"