| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
/* |
| 3 |
* Apple S8000/S8003 "A9" SoC |
| 4 |
* |
| 5 |
* This file contains parts common to both variants of A9 |
| 6 |
* |
| 7 |
* Copyright (c) 2022, Konrad Dybcio <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/interrupt-controller/apple-aic.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include <dt-bindings/pinctrl/apple.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
interrupt-parent = <&aic>; |
| 17 |
#address-cells = <2>; |
| 18 |
#size-cells = <2>; |
| 19 |
|
| 20 |
clkref: clock-ref { |
| 21 |
compatible = "fixed-clock"; |
| 22 |
#clock-cells = <0>; |
| 23 |
clock-frequency = <24000000>; |
| 24 |
clock-output-names = "clkref"; |
| 25 |
}; |
| 26 |
|
| 27 |
cpus { |
| 28 |
#address-cells = <2>; |
| 29 |
#size-cells = <0>; |
| 30 |
|
| 31 |
cpu0: cpu@0 { |
| 32 |
compatible = "apple,twister"; |
| 33 |
reg = <0x0 0x0>; |
| 34 |
cpu-release-addr = <0 0>; /* To be filled in by loader */ |
| 35 |
operating-points-v2 = <&twister_opp>; |
| 36 |
performance-domains = <&cpufreq>; |
| 37 |
enable-method = "spin-table"; |
| 38 |
device_type = "cpu"; |
| 39 |
next-level-cache = <&l2_cache>; |
| 40 |
i-cache-size = <0x10000>; |
| 41 |
d-cache-size = <0x10000>; |
| 42 |
}; |
| 43 |
|
| 44 |
cpu1: cpu@1 { |
| 45 |
compatible = "apple,twister"; |
| 46 |
reg = <0x0 0x1>; |
| 47 |
cpu-release-addr = <0 0>; /* To be filled in by loader */ |
| 48 |
operating-points-v2 = <&twister_opp>; |
| 49 |
performance-domains = <&cpufreq>; |
| 50 |
enable-method = "spin-table"; |
| 51 |
device_type = "cpu"; |
| 52 |
next-level-cache = <&l2_cache>; |
| 53 |
i-cache-size = <0x10000>; |
| 54 |
d-cache-size = <0x10000>; |
| 55 |
}; |
| 56 |
|
| 57 |
l2_cache: l2-cache { |
| 58 |
compatible = "cache"; |
| 59 |
cache-level = <2>; |
| 60 |
cache-unified; |
| 61 |
cache-size = <0x300000>; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
soc { |
| 66 |
compatible = "simple-bus"; |
| 67 |
#address-cells = <2>; |
| 68 |
#size-cells = <2>; |
| 69 |
nonposted-mmio; |
| 70 |
ranges; |
| 71 |
|
| 72 |
cpufreq: performance-controller@202220000 { |
| 73 |
compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq"; |
| 74 |
reg = <0x2 0x02220000 0 0x1000>; |
| 75 |
#performance-domain-cells = <0>; |
| 76 |
}; |
| 77 |
|
| 78 |
serial0: serial@20a0c0000 { |
| 79 |
compatible = "apple,s5l-uart"; |
| 80 |
reg = <0x2 0x0a0c0000 0x0 0x4000>; |
| 81 |
reg-io-width = <4>; |
| 82 |
interrupt-parent = <&aic>; |
| 83 |
interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>; |
| 84 |
/* Use the bootloader-enabled clocks for now. */ |
| 85 |
clocks = <&clkref>, <&clkref>; |
| 86 |
clock-names = "uart", "clk_uart_baud0"; |
| 87 |
power-domains = <&ps_uart0>; |
| 88 |
status = "disabled"; |
| 89 |
}; |
| 90 |
|
| 91 |
i2c0: i2c@20a110000 { |
| 92 |
compatible = "apple,s8000-i2c", "apple,i2c"; |
| 93 |
reg = <0x2 0x0a110000 0x0 0x1000>; |
| 94 |
clocks = <&clkref>; |
| 95 |
interrupt-parent = <&aic>; |
| 96 |
interrupts = <AIC_IRQ 206 IRQ_TYPE_LEVEL_HIGH>; |
| 97 |
pinctrl-0 = <&i2c0_pins>; |
| 98 |
pinctrl-names = "default"; |
| 99 |
power-domains = <&ps_i2c0>; |
| 100 |
#address-cells = <1>; |
| 101 |
#size-cells = <0>; |
| 102 |
status = "disabled"; |
| 103 |
}; |
| 104 |
|
| 105 |
i2c1: i2c@20a111000 { |
| 106 |
compatible = "apple,s8000-i2c", "apple,i2c"; |
| 107 |
reg = <0x2 0x0a111000 0x0 0x1000>; |
| 108 |
clocks = <&clkref>; |
| 109 |
interrupt-parent = <&aic>; |
| 110 |
interrupts = <AIC_IRQ 207 IRQ_TYPE_LEVEL_HIGH>; |
| 111 |
pinctrl-0 = <&i2c1_pins>; |
| 112 |
pinctrl-names = "default"; |
| 113 |
power-domains = <&ps_i2c1>; |
| 114 |
#address-cells = <1>; |
| 115 |
#size-cells = <0>; |
| 116 |
status = "disabled"; |
| 117 |
}; |
| 118 |
|
| 119 |
i2c2: i2c@20a112000 { |
| 120 |
compatible = "apple,s8000-i2c", "apple,i2c"; |
| 121 |
reg = <0x2 0x0a112000 0x0 0x1000>; |
| 122 |
clocks = <&clkref>; |
| 123 |
interrupt-parent = <&aic>; |
| 124 |
interrupts = <AIC_IRQ 208 IRQ_TYPE_LEVEL_HIGH>; |
| 125 |
pinctrl-0 = <&i2c2_pins>; |
| 126 |
pinctrl-names = "default"; |
| 127 |
power-domains = <&ps_i2c2>; |
| 128 |
#address-cells = <1>; |
| 129 |
#size-cells = <0>; |
| 130 |
status = "disabled"; |
| 131 |
}; |
| 132 |
|
| 133 |
pmgr: power-management@20e000000 { |
| 134 |
compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd"; |
| 135 |
#address-cells = <1>; |
| 136 |
#size-cells = <1>; |
| 137 |
|
| 138 |
reg = <0x2 0xe000000 0 0x8c000>; |
| 139 |
}; |
| 140 |
|
| 141 |
aic: interrupt-controller@20e100000 { |
| 142 |
compatible = "apple,s8000-aic", "apple,aic"; |
| 143 |
reg = <0x2 0x0e100000 0x0 0x100000>; |
| 144 |
#interrupt-cells = <3>; |
| 145 |
interrupt-controller; |
| 146 |
power-domains = <&ps_aic>; |
| 147 |
}; |
| 148 |
|
| 149 |
dwi_bl: backlight@20e200080 { |
| 150 |
compatible = "apple,s8000-dwi-bl", "apple,dwi-bl"; |
| 151 |
reg = <0x2 0x0e200080 0x0 0x8>; |
| 152 |
power-domains = <&ps_dwi>; |
| 153 |
status = "disabled"; |
| 154 |
}; |
| 155 |
|
| 156 |
pinctrl_ap: pinctrl@20f100000 { |
| 157 |
compatible = "apple,s8000-pinctrl", "apple,pinctrl"; |
| 158 |
reg = <0x2 0x0f100000 0x0 0x100000>; |
| 159 |
power-domains = <&ps_gpio>; |
| 160 |
|
| 161 |
gpio-controller; |
| 162 |
#gpio-cells = <2>; |
| 163 |
gpio-ranges = <&pinctrl_ap 0 0 208>; |
| 164 |
apple,npins = <208>; |
| 165 |
|
| 166 |
interrupt-controller; |
| 167 |
#interrupt-cells = <2>; |
| 168 |
interrupt-parent = <&aic>; |
| 169 |
interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>, |
| 170 |
<AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>, |
| 171 |
<AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>, |
| 172 |
<AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>, |
| 173 |
<AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>, |
| 174 |
<AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>, |
| 175 |
<AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>; |
| 176 |
|
| 177 |
i2c0_pins: i2c0-pins { |
| 178 |
pinmux = <APPLE_PINMUX(46, 1)>, |
| 179 |
<APPLE_PINMUX(45, 1)>; |
| 180 |
}; |
| 181 |
|
| 182 |
i2c1_pins: i2c1-pins { |
| 183 |
pinmux = <APPLE_PINMUX(115, 1)>, |
| 184 |
<APPLE_PINMUX(114, 1)>; |
| 185 |
}; |
| 186 |
|
| 187 |
i2c2_pins: i2c2-pins { |
| 188 |
pinmux = <APPLE_PINMUX(23, 1)>, |
| 189 |
<APPLE_PINMUX(22, 1)>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
pinctrl_aop: pinctrl@2100f0000 { |
| 194 |
compatible = "apple,s8000-pinctrl", "apple,pinctrl"; |
| 195 |
reg = <0x2 0x100f0000 0x0 0x100000>; |
| 196 |
power-domains = <&ps_aop_gpio>; |
| 197 |
|
| 198 |
gpio-controller; |
| 199 |
#gpio-cells = <2>; |
| 200 |
gpio-ranges = <&pinctrl_aop 0 0 42>; |
| 201 |
apple,npins = <42>; |
| 202 |
|
| 203 |
interrupt-controller; |
| 204 |
#interrupt-cells = <2>; |
| 205 |
interrupt-parent = <&aic>; |
| 206 |
interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>, |
| 207 |
<AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>, |
| 208 |
<AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>, |
| 209 |
<AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>, |
| 210 |
<AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>, |
| 211 |
<AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>, |
| 212 |
<AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>; |
| 213 |
}; |
| 214 |
|
| 215 |
pmgr_mini: power-management@210200000 { |
| 216 |
compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd"; |
| 217 |
#address-cells = <1>; |
| 218 |
#size-cells = <1>; |
| 219 |
|
| 220 |
reg = <0x2 0x10200000 0 0x84000>; |
| 221 |
}; |
| 222 |
|
| 223 |
wdt: watchdog@2102b0000 { |
| 224 |
compatible = "apple,s8000-wdt", "apple,wdt"; |
| 225 |
reg = <0x2 0x102b0000 0x0 0x4000>; |
| 226 |
clocks = <&clkref>; |
| 227 |
interrupt-parent = <&aic>; |
| 228 |
interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
timer { |
| 233 |
compatible = "arm,armv8-timer"; |
| 234 |
interrupt-parent = <&aic>; |
| 235 |
interrupt-names = "phys", "virt"; |
| 236 |
/* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */ |
| 237 |
interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>, |
| 238 |
<AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>; |
| 239 |
}; |
| 240 |
}; |
| 241 |
|
| 242 |
#include "s800-0-3-pmgr.dtsi" |
| 243 |
|
| 244 |
/* |
| 245 |
* The A9 was made by two separate fabs on two different process |
| 246 |
* nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made |
| 247 |
* the S8003 (APL1022) on 16nm. There are some minor differences |
| 248 |
* such as timing in cpufreq state transistions. |
| 249 |
*/ |