| 1 |
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 |
/* |
| 3 |
* Copyright 2020-2022 Advanced Micro Devices, Inc. |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/gpio/gpio.h> |
| 7 |
#include "dt-bindings/interrupt-controller/arm-gic.h" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Elba ASIC Board"; |
| 11 |
compatible = "amd,pensando-elba"; |
| 12 |
interrupt-parent = <&gic>; |
| 13 |
#address-cells = <2>; |
| 14 |
#size-cells = <2>; |
| 15 |
|
| 16 |
dma-coherent; |
| 17 |
|
| 18 |
ahb_clk: oscillator0 { |
| 19 |
compatible = "fixed-clock"; |
| 20 |
#clock-cells = <0>; |
| 21 |
}; |
| 22 |
|
| 23 |
emmc_clk: oscillator2 { |
| 24 |
compatible = "fixed-clock"; |
| 25 |
#clock-cells = <0>; |
| 26 |
}; |
| 27 |
|
| 28 |
flash_clk: oscillator3 { |
| 29 |
compatible = "fixed-clock"; |
| 30 |
#clock-cells = <0>; |
| 31 |
}; |
| 32 |
|
| 33 |
ref_clk: oscillator4 { |
| 34 |
compatible = "fixed-clock"; |
| 35 |
#clock-cells = <0>; |
| 36 |
}; |
| 37 |
|
| 38 |
psci { |
| 39 |
compatible = "arm,psci-0.2"; |
| 40 |
method = "smc"; |
| 41 |
}; |
| 42 |
|
| 43 |
timer { |
| 44 |
compatible = "arm,armv8-timer"; |
| 45 |
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| 46 |
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| 47 |
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| 48 |
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; |
| 49 |
}; |
| 50 |
|
| 51 |
pmu { |
| 52 |
compatible = "arm,cortex-a72-pmu"; |
| 53 |
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| 54 |
}; |
| 55 |
|
| 56 |
soc: soc { |
| 57 |
compatible = "simple-bus"; |
| 58 |
#address-cells = <2>; |
| 59 |
#size-cells = <2>; |
| 60 |
ranges; |
| 61 |
|
| 62 |
i2c0: i2c@400 { |
| 63 |
compatible = "snps,designware-i2c"; |
| 64 |
reg = <0x0 0x400 0x0 0x100>; |
| 65 |
clocks = <&ahb_clk>; |
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <0>; |
| 68 |
i2c-sda-hold-time-ns = <480>; |
| 69 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 70 |
status = "disabled"; |
| 71 |
}; |
| 72 |
|
| 73 |
wdt0: watchdog@1400 { |
| 74 |
compatible = "snps,dw-wdt"; |
| 75 |
reg = <0x0 0x1400 0x0 0x100>; |
| 76 |
clocks = <&ahb_clk>; |
| 77 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 78 |
status = "disabled"; |
| 79 |
}; |
| 80 |
|
| 81 |
qspi: spi@2400 { |
| 82 |
compatible = "amd,pensando-elba-qspi", "cdns,qspi-nor"; |
| 83 |
reg = <0x0 0x2400 0x0 0x400>, |
| 84 |
<0x0 0x7fff0000 0x0 0x1000>; |
| 85 |
#address-cells = <1>; |
| 86 |
#size-cells = <0>; |
| 87 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 88 |
clocks = <&flash_clk>; |
| 89 |
cdns,fifo-depth = <1024>; |
| 90 |
cdns,fifo-width = <4>; |
| 91 |
cdns,trigger-address = <0x7fff0000>; |
| 92 |
status = "disabled"; |
| 93 |
}; |
| 94 |
|
| 95 |
spi0: spi@2800 { |
| 96 |
compatible = "amd,pensando-elba-spi"; |
| 97 |
reg = <0x0 0x2800 0x0 0x100>; |
| 98 |
#address-cells = <1>; |
| 99 |
#size-cells = <0>; |
| 100 |
amd,pensando-elba-syscon = <&syscon>; |
| 101 |
clocks = <&ahb_clk>; |
| 102 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 103 |
num-cs = <2>; |
| 104 |
status = "disabled"; |
| 105 |
}; |
| 106 |
|
| 107 |
gpio0: gpio@4000 { |
| 108 |
compatible = "snps,dw-apb-gpio"; |
| 109 |
reg = <0x0 0x4000 0x0 0x78>; |
| 110 |
#address-cells = <1>; |
| 111 |
#size-cells = <0>; |
| 112 |
status = "disabled"; |
| 113 |
|
| 114 |
porta: gpio-port@0 { |
| 115 |
compatible = "snps,dw-apb-gpio-port"; |
| 116 |
reg = <0>; |
| 117 |
gpio-controller; |
| 118 |
#gpio-cells = <2>; |
| 119 |
ngpios = <8>; |
| 120 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 121 |
interrupt-controller; |
| 122 |
interrupt-parent = <&gic>; |
| 123 |
#interrupt-cells = <2>; |
| 124 |
}; |
| 125 |
|
| 126 |
portb: gpio-port@1 { |
| 127 |
compatible = "snps,dw-apb-gpio-port"; |
| 128 |
reg = <1>; |
| 129 |
gpio-controller; |
| 130 |
#gpio-cells = <2>; |
| 131 |
ngpios = <8>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
uart0: serial@4800 { |
| 136 |
compatible = "ns16550a"; |
| 137 |
reg = <0x0 0x4800 0x0 0x100>; |
| 138 |
clocks = <&ref_clk>; |
| 139 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 140 |
reg-shift = <2>; |
| 141 |
reg-io-width = <4>; |
| 142 |
}; |
| 143 |
|
| 144 |
gic: interrupt-controller@800000 { |
| 145 |
compatible = "arm,gic-v3"; |
| 146 |
reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ |
| 147 |
<0x0 0xa00000 0x0 0x200000>, /* GICR */ |
| 148 |
<0x0 0x60000000 0x0 0x2000>, /* GICC */ |
| 149 |
<0x0 0x60010000 0x0 0x1000>, /* GICH */ |
| 150 |
<0x0 0x60020000 0x0 0x2000>; /* GICV */ |
| 151 |
#address-cells = <2>; |
| 152 |
#size-cells = <2>; |
| 153 |
#interrupt-cells = <3>; |
| 154 |
ranges; |
| 155 |
interrupt-controller; |
| 156 |
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 157 |
|
| 158 |
/* |
| 159 |
* Elba specific pre-ITS is enabled using the |
| 160 |
* existing property socionext,synquacer-pre-its |
| 161 |
*/ |
| 162 |
gic_its: msi-controller@820000 { |
| 163 |
compatible = "arm,gic-v3-its"; |
| 164 |
reg = <0x0 0x820000 0x0 0x10000>; |
| 165 |
msi-controller; |
| 166 |
#msi-cells = <1>; |
| 167 |
socionext,synquacer-pre-its = |
| 168 |
<0xc00000 0x1000000>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
emmc: mmc@30440000 { |
| 173 |
compatible = "amd,pensando-elba-sd4hc", "cdns,sd4hc"; |
| 174 |
reg = <0x0 0x30440000 0x0 0x10000>, |
| 175 |
<0x0 0x30480044 0x0 0x4>; /* byte-lane ctrl */ |
| 176 |
clocks = <&emmc_clk>; |
| 177 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 178 |
cdns,phy-input-delay-sd-highspeed = <0x4>; |
| 179 |
cdns,phy-input-delay-legacy = <0x4>; |
| 180 |
cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; |
| 181 |
cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; |
| 182 |
mmc-ddr-1_8v; |
| 183 |
status = "disabled"; |
| 184 |
}; |
| 185 |
|
| 186 |
syscon: syscon@307c0000 { |
| 187 |
compatible = "amd,pensando-elba-syscon", "syscon"; |
| 188 |
reg = <0x0 0x307c0000 0x0 0x3000>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
}; |