Debian Codegraph @

scripts/dtc/include-prefixes/arm64/amazon/alpine-v2.dtsi

raw
1 /*
2 * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
3 *
4 * Antoine Tenart <[email protected]>
5 *
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * BSD license below:
11 *
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
14 * conditions are met:
15 *
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
18 * disclaimer.
19 *
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
24 *
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32 * SOFTWARE.
33 */
34
35 /dts-v1/;
36
37 #include <dt-bindings/interrupt-controller/arm-gic.h>
38
39 / {
40 model = "Annapurna Labs Alpine v2";
41 compatible = "al,alpine-v2";
42 interrupt-parent = <&gic>;
43 #address-cells = <2>;
44 #size-cells = <2>;
45
46 cpus {
47 #address-cells = <2>;
48 #size-cells = <0>;
49
50 cpu@0 {
51 compatible = "arm,cortex-a57";
52 device_type = "cpu";
53 reg = <0x0 0x0>;
54 enable-method = "psci";
55 };
56
57 cpu@1 {
58 compatible = "arm,cortex-a57";
59 device_type = "cpu";
60 reg = <0x0 0x1>;
61 enable-method = "psci";
62 };
63
64 cpu@2 {
65 compatible = "arm,cortex-a57";
66 device_type = "cpu";
67 reg = <0x0 0x2>;
68 enable-method = "psci";
69 };
70
71 cpu@3 {
72 compatible = "arm,cortex-a57";
73 device_type = "cpu";
74 reg = <0x0 0x3>;
75 enable-method = "psci";
76 };
77 };
78
79 psci {
80 compatible = "arm,psci-0.2", "arm,psci";
81 method = "smc";
82 cpu_suspend = <0x84000001>;
83 cpu_off = <0x84000002>;
84 cpu_on = <0x84000003>;
85 };
86
87 sbclk: sbclk {
88 compatible = "fixed-clock";
89 #clock-cells = <0>;
90 clock-frequency = <1000000>;
91 };
92
93 timer {
94 compatible = "arm,armv8-timer";
95 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
96 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
97 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
98 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
99 };
100
101 pmu {
102 compatible = "arm,cortex-a57-pmu";
103 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
104 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
105 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
106 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
107 };
108
109 soc {
110 compatible = "simple-bus";
111 #address-cells = <2>;
112 #size-cells = <2>;
113
114 interrupt-parent = <&gic>;
115 ranges;
116
117 gic: interrupt-controller@f0200000 {
118 compatible = "arm,gic-v3";
119 reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */
120 <0x0 0xf0280000 0x0 0x200000>, /* GICR */
121 <0x0 0xf0100000 0x0 0x2000>, /* GICC */
122 <0x0 0xf0110000 0x0 0x2000>, /* GICV */
123 <0x0 0xf0120000 0x0 0x2000>; /* GICH */
124 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
125 interrupt-controller;
126 #address-cells = <0>;
127 #interrupt-cells = <3>;
128 };
129
130 pci@fbc00000 {
131 compatible = "pci-host-ecam-generic";
132 device_type = "pci";
133 #size-cells = <2>;
134 #address-cells = <3>;
135 #interrupt-cells = <1>;
136 reg = <0x0 0xfbc00000 0x0 0x100000>;
137 interrupt-map-mask = <0xf800 0 0 7>;
138 /* add legacy interrupts for SATA only */
139 interrupt-map = <0x4000 0 0 1 &gic 0 53 4>,
140 <0x4800 0 0 1 &gic 0 54 4>;
141 /* 32 bit non prefetchable memory space */
142 ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
143 bus-range = <0x00 0x00>;
144 msi-parent = <&msix>;
145 };
146
147 msix: msix@fbe00000 {
148 compatible = "al,alpine-msix";
149 reg = <0x0 0xfbe00000 0x0 0x100000>;
150 msi-controller;
151 al,msi-base-spi = <160>;
152 al,msi-num-spis = <160>;
153 };
154
155 io-bus@fc000000 {
156 compatible = "simple-bus";
157 #address-cells = <1>;
158 #size-cells = <1>;
159 ranges = <0x0 0x0 0xfc000000 0x2000000>;
160
161 uart0: serial@1883000 {
162 compatible = "ns16550a";
163 reg = <0x1883000 0x1000>;
164 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
165 clock-frequency = <500000000>;
166 reg-shift = <2>;
167 reg-io-width = <4>;
168 status = "disabled";
169 };
170
171 uart1: serial@1884000 {
172 compatible = "ns16550a";
173 reg = <0x1884000 0x1000>;
174 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
175 clock-frequency = <500000000>;
176 reg-shift = <2>;
177 reg-io-width = <4>;
178 status = "disabled";
179 };
180
181 uart2: serial@1885000 {
182 compatible = "ns16550a";
183 reg = <0x1885000 0x1000>;
184 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
185 clock-frequency = <500000000>;
186 reg-shift = <2>;
187 reg-io-width = <4>;
188 status = "disabled";
189 };
190
191 uart3: serial@1886000 {
192 compatible = "ns16550a";
193 reg = <0x1886000 0x1000>;
194 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
195 clock-frequency = <500000000>;
196 reg-shift = <2>;
197 reg-io-width = <4>;
198 status = "disabled";
199 };
200
201 timer0: timer@1890000 {
202 compatible = "arm,sp804", "arm,primecell";
203 reg = <0x1890000 0x1000>;
204 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
205 clocks = <&sbclk>;
206 };
207
208 timer1: timer@1891000 {
209 compatible = "arm,sp804", "arm,primecell";
210 reg = <0x1891000 0x1000>;
211 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
212 clocks = <&sbclk>;
213 status = "disabled";
214 };
215
216 timer2: timer@1892000 {
217 compatible = "arm,sp804", "arm,primecell";
218 reg = <0x1892000 0x1000>;
219 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
220 clocks = <&sbclk>;
221 status = "disabled";
222 };
223
224 timer3: timer@1893000 {
225 compatible = "arm,sp804", "arm,primecell";
226 reg = <0x1893000 0x1000>;
227 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
228 clocks = <&sbclk>;
229 status = "disabled";
230 };
231 };
232 };
233 };