Debian Codegraph @

scripts/dtc/include-prefixes/arm64/altera/socfpga_stratix10_socdk_nand.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright Altera Corporation (C) 2015. All rights reserved.
4 */
5
6 #include "socfpga_stratix10.dtsi"
7
8 / {
9 model = "SoCFPGA Stratix 10 SoCDK";
10 compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
11
12 aliases {
13 serial0 = &uart0;
14 ethernet0 = &gmac0;
15 ethernet1 = &gmac1;
16 ethernet2 = &gmac2;
17 };
18
19 chosen {
20 stdout-path = "serial0:115200n8";
21 };
22
23 leds {
24 compatible = "gpio-leds";
25 led-hps0 {
26 label = "hps_led0";
27 gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
28 };
29
30 led-hps1 {
31 label = "hps_led1";
32 gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
33 };
34
35 led-hps2 {
36 label = "hps_led2";
37 gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
38 };
39 };
40
41 memory@80000000 {
42 device_type = "memory";
43 /* We expect the bootloader to fill in the reg */
44 reg = <0 0x80000000 0 0>;
45 };
46
47 ref_033v: regulator-v-ref {
48 compatible = "regulator-fixed";
49 regulator-name = "0.33V";
50 regulator-min-microvolt = <330000>;
51 regulator-max-microvolt = <330000>;
52 };
53 };
54
55 &gpio1 {
56 status = "okay";
57 };
58
59 &gmac2 {
60 status = "okay";
61 phy-mode = "rgmii";
62 phy-handle = <&phy0>;
63
64 max-frame-size = <9000>;
65
66 mdio0 {
67 #address-cells = <1>;
68 #size-cells = <0>;
69 compatible = "snps,dwmac-mdio";
70 phy0: ethernet-phy@0 {
71 reg = <4>;
72
73 txd0-skew-ps = <0>; /* -420ps */
74 txd1-skew-ps = <0>; /* -420ps */
75 txd2-skew-ps = <0>; /* -420ps */
76 txd3-skew-ps = <0>; /* -420ps */
77 rxd0-skew-ps = <420>; /* 0ps */
78 rxd1-skew-ps = <420>; /* 0ps */
79 rxd2-skew-ps = <420>; /* 0ps */
80 rxd3-skew-ps = <420>; /* 0ps */
81 txen-skew-ps = <0>; /* -420ps */
82 txc-skew-ps = <900>; /* 0ps */
83 rxdv-skew-ps = <420>; /* 0ps */
84 rxc-skew-ps = <1680>; /* 780ps */
85 };
86 };
87 };
88
89 &nand {
90 status = "okay";
91
92 nand@0 {
93 reg = <0>;
94 #address-cells = <1>;
95 #size-cells = <1>;
96 nand-bus-width = <16>;
97
98 partition@0 {
99 label = "u-boot";
100 reg = <0 0x200000>;
101 };
102
103 partition@200000 {
104 label = "root";
105 reg = <0x200000 0x3fe00000>;
106 };
107 };
108 };
109
110 &osc1 {
111 clock-frequency = <25000000>;
112 };
113
114 &uart0 {
115 status = "okay";
116 };
117
118 &usb0 {
119 status = "okay";
120 disable-over-current;
121 };
122
123 &watchdog0 {
124 status = "okay";
125 };
126
127 &i2c2 {
128 status = "okay";
129 clock-frequency = <100000>;
130 i2c-sda-falling-time-ns = <890>; /* hcnt */
131 i2c-scl-falling-time-ns = <890>; /* lcnt */
132
133 adc@14 {
134 compatible = "lltc,ltc2497";
135 reg = <0x14>;
136 vref-supply = <&ref_033v>;
137 };
138
139 temp@4c {
140 compatible = "maxim,max1619";
141 reg = <0x4c>;
142 };
143
144 eeprom@51 {
145 compatible = "atmel,24c32";
146 reg = <0x51>;
147 pagesize = <32>;
148 };
149
150 rtc@68 {
151 compatible = "dallas,ds1339";
152 reg = <0x68>;
153 };
154 };
155
156 &qspi {
157 status = "okay";
158 flash@0 {
159 compatible = "micron,mt25qu02g", "jedec,spi-nor";
160 reg = <0>;
161 spi-max-frequency = <100000000>;
162
163 m25p,fast-read;
164 cdns,read-delay = <1>;
165 cdns,tshsl-ns = <50>;
166 cdns,tsd2d-ns = <50>;
167 cdns,tchsh-ns = <4>;
168 cdns,tslch-ns = <4>;
169
170 partitions {
171 compatible = "fixed-partitions";
172 #address-cells = <1>;
173 #size-cells = <1>;
174
175 qspi_boot: partition@0 {
176 label = "Boot and fpga data";
177 reg = <0x0 0x03fe0000>;
178 };
179
180 qspi_rootfs: partition@3fe0000 {
181 label = "Root Filesystem - JFFS2";
182 reg = <0x03fe0000 0x0c020000>;
183 };
184 };
185 };
186 };