Debian Codegraph @

scripts/dtc/include-prefixes/arm64/allwinner/sun55i-h728-x96qpro+.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0-only OR MIT)
2 // Copyright (C) 2024 Arm Ltd.
3
4 /dts-v1/;
5
6 #include "sun55i-a523.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9
10 / {
11 model = "X96Q Pro+";
12 compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728";
13
14 aliases {
15 serial0 = &uart0;
16 };
17
18 chosen {
19 stdout-path = "serial0:115200n8";
20 };
21
22 ext_osc32k: ext-osc32k-clk {
23 #clock-cells = <0>;
24 compatible = "fixed-clock";
25 clock-frequency = <32768>;
26 clock-output-names = "ext_osc32k";
27 };
28
29 reg_vcc5v: vcc5v {
30 /* board wide 5V supply from the barrel plug */
31 compatible = "regulator-fixed";
32 regulator-name = "vcc-5v";
33 regulator-min-microvolt = <5000000>;
34 regulator-max-microvolt = <5000000>;
35 regulator-always-on;
36 };
37
38 reg_vcc3v3: vcc3v3 {
39 /* 3.3V dummy supply for the SD card */
40 compatible = "regulator-fixed";
41 regulator-name = "vcc-3v3";
42 regulator-min-microvolt = <3300000>;
43 regulator-max-microvolt = <3300000>;
44 vin-supply = <&reg_vcc5v>;
45 regulator-always-on;
46 };
47 };
48
49 &ehci0 {
50 status = "okay";
51 };
52
53 &ehci1 {
54 status = "okay";
55 };
56
57 &gpu {
58 mali-supply = <&reg_dcdc2>;
59 status = "okay";
60 };
61
62 &mmc0 {
63 vmmc-supply = <&reg_vcc3v3>;
64 cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
65 bus-width = <4>;
66 disable-wp;
67 status = "okay";
68 };
69
70 &mmc2 {
71 vmmc-supply = <&reg_cldo3>;
72 vqmmc-supply = <&reg_cldo1>;
73 bus-width = <8>;
74 non-removable;
75 cap-mmc-hw-reset;
76 mmc-ddr-1_8v;
77 mmc-hs200-1_8v;
78 status = "okay";
79 };
80
81 &ohci0 {
82 status = "okay";
83 };
84
85 &ohci1 {
86 status = "okay";
87 };
88
89 &pio {
90 vcc-pb-supply = <&reg_cldo3>; /* via VCC-IO */
91 vcc-pc-supply = <&reg_cldo1>;
92 vcc-pd-supply = <&reg_dcdc4>;
93 vcc-pe-supply = <&reg_dcdc4>;
94 vcc-pf-supply = <&reg_cldo3>; /* actually switchable */
95 vcc-pg-supply = <&reg_bldo1>;
96 vcc-ph-supply = <&reg_cldo3>; /* via VCC-IO */
97 vcc-pi-supply = <&reg_dcdc4>;
98 vcc-pj-supply = <&reg_dcdc4>;
99 vcc-pk-supply = <&reg_bldo3>;
100 };
101
102 &r_i2c0 {
103 status = "okay";
104
105 axp717: pmic@34 {
106 compatible = "x-powers,axp717";
107 reg = <0x34>;
108 interrupt-controller;
109 #interrupt-cells = <1>;
110 interrupt-parent = <&nmi_intc>;
111 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
112
113 vin1-supply = <&reg_vcc5v>;
114 vin2-supply = <&reg_vcc5v>;
115 vin3-supply = <&reg_vcc5v>;
116 vin4-supply = <&reg_vcc5v>;
117 aldoin-supply = <&reg_vcc5v>;
118 bldoin-supply = <&reg_vcc5v>;
119 cldoin-supply = <&reg_vcc5v>;
120
121 regulators {
122 /* Supplies the "little" cluster (1.0(?) GHz cores) */
123 reg_dcdc1: dcdc1 {
124 regulator-always-on;
125 regulator-min-microvolt = <900000>;
126 regulator-max-microvolt = <1160000>;
127 regulator-name = "vdd-cpul";
128 };
129
130 reg_dcdc2: dcdc2 {
131 regulator-always-on;
132 regulator-min-microvolt = <920000>;
133 regulator-max-microvolt = <920000>;
134 regulator-name = "vdd-gpu-sys";
135 };
136
137 reg_dcdc3: dcdc3 {
138 regulator-always-on;
139 regulator-min-microvolt = <1360000>;
140 regulator-max-microvolt = <1360000>;
141 regulator-name = "vdd-dram";
142 };
143
144 reg_dcdc4: dcdc4 {
145 regulator-min-microvolt = <1000000>;
146 regulator-max-microvolt = <1000000>;
147 regulator-name = "vdd-dcdc4";
148 };
149
150 reg_aldo1: aldo1 {
151 /* not connected */
152 };
153
154 reg_aldo2: aldo2 {
155 /* not connected */
156 };
157
158 reg_aldo3: aldo3 {
159 regulator-always-on;
160 regulator-min-microvolt = <3300000>;
161 regulator-max-microvolt = <3300000>;
162 regulator-name = "vcc-aldo3";
163 };
164
165 reg_aldo4: aldo4 {
166 regulator-always-on;
167 regulator-min-microvolt = <1800000>;
168 regulator-max-microvolt = <1800000>;
169 regulator-name = "vcc-pll-dxco-avcc";
170 };
171
172 reg_bldo1: bldo1 {
173 regulator-min-microvolt = <1800000>;
174 regulator-max-microvolt = <1800000>;
175 regulator-name = "vcc-pg-wifi-lvds";
176 };
177
178 reg_bldo2: bldo2 {
179 regulator-always-on;
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <1800000>;
182 regulator-name = "vcc-dram-1v8";
183 };
184
185 reg_bldo3: bldo3 {
186 regulator-min-microvolt = <2800000>;
187 regulator-max-microvolt = <2800000>;
188 regulator-name = "vcc-bldo3";
189 };
190
191 reg_bldo4: bldo4 {
192 /* not connected */
193 };
194
195 reg_cldo1: cldo1 {
196 regulator-always-on;
197 regulator-min-microvolt = <1800000>;
198 regulator-max-microvolt = <1800000>;
199 regulator-name = "vcc-codec-sd";
200 };
201
202 reg_cldo2: cldo2 {
203 };
204
205 reg_cldo3: cldo3 {
206 regulator-min-microvolt = <3300000>;
207 regulator-max-microvolt = <3300000>;
208 regulator-name = "vcc-codec-eth-sd";
209 };
210
211 reg_cldo4: cldo4 {
212 regulator-min-microvolt = <3300000>;
213 regulator-max-microvolt = <3300000>;
214 regulator-name = "vcc-eth-phy";
215 };
216
217 reg_cpusldo: cpusldo {
218 /* supplies the management core */
219 regulator-always-on;
220 regulator-min-microvolt = <900000>;
221 regulator-max-microvolt = <900000>;
222 regulator-name = "vdd-cpus";
223 };
224 };
225 };
226
227 axp323: pmic@36 {
228 compatible = "x-powers,axp323";
229 reg = <0x36>;
230 #interrupt-cells = <1>;
231 interrupt-controller;
232 interrupt-parent = <&nmi_intc>;
233 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
234 status = "okay";
235
236 vin1-supply = <&reg_vcc5v>;
237 vin2-supply = <&reg_vcc5v>;
238 vin3-supply = <&reg_vcc5v>;
239
240 regulators {
241 aldo1 {
242 /* not connected */
243 };
244
245 dldo1 {
246 /* not connected */
247 };
248
249 /* Supplies the "big" cluster (1.8 GHz cores) */
250 reg_dcdc1_323: dcdc1 {
251 regulator-always-on;
252 regulator-min-microvolt = <900000>;
253 regulator-max-microvolt = <1160000>;
254 regulator-name = "vdd-cpub";
255 };
256
257 /* DCDC2 is polyphased with DCDC1 */
258
259 reg_dcdc3_323: dcdc3 {
260 regulator-always-on;
261 regulator-min-microvolt = <1050000>;
262 regulator-max-microvolt = <1050000>;
263 regulator-name = "vdd-dcdc3";
264 };
265 };
266 };
267 };
268
269 &r_pio {
270 /*
271 * Specifying the supply would create a circular dependency.
272 *
273 * vcc-pl-supply = <&reg_aldo3>;
274 */
275 vcc-pm-supply = <&reg_aldo3>;
276 };
277
278 &uart0 {
279 pinctrl-names = "default";
280 pinctrl-0 = <&uart0_pb_pins>;
281 status = "okay";
282 };
283
284 &usb_otg {
285 /* USB0 is a USB-A receptacle, always powered, so force host mode. */
286 dr_mode = "host";
287 status = "okay";
288 };
289
290 &usbphy {
291 status = "okay";
292 };