| 1 |
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 |
/* |
| 3 |
* Copyright (C) 2024 Ryan Walklin <[email protected]>. |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "sun50i-h616.dtsi" |
| 9 |
#include "sun50i-h616-cpu-opp.dtsi" |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/linux-event-codes.h> |
| 12 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 13 |
#include <dt-bindings/leds/common.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Anbernic RG35XX 2024"; |
| 17 |
chassis-type = "handset"; |
| 18 |
compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
serial0 = &uart0; |
| 22 |
}; |
| 23 |
|
| 24 |
battery: battery { |
| 25 |
compatible = "simple-battery"; |
| 26 |
constant-charge-current-max-microamp = <1024000>; |
| 27 |
voltage-max-design-microvolt = <4200000>; |
| 28 |
}; |
| 29 |
|
| 30 |
chosen { |
| 31 |
stdout-path = "serial0:115200n8"; |
| 32 |
}; |
| 33 |
|
| 34 |
gpio_keys_gamepad: gpio-keys-gamepad { |
| 35 |
compatible = "gpio-keys"; |
| 36 |
|
| 37 |
button-a { |
| 38 |
label = "Action-Pad A"; |
| 39 |
gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ |
| 40 |
linux,input-type = <EV_KEY>; |
| 41 |
linux,code = <BTN_EAST>; |
| 42 |
}; |
| 43 |
|
| 44 |
button-b { |
| 45 |
label = "Action-Pad B"; |
| 46 |
gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ |
| 47 |
linux,input-type = <EV_KEY>; |
| 48 |
linux,code = <BTN_SOUTH>; |
| 49 |
}; |
| 50 |
|
| 51 |
button-down { |
| 52 |
label = "D-Pad Down"; |
| 53 |
gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */ |
| 54 |
linux,input-type = <EV_KEY>; |
| 55 |
linux,code = <BTN_DPAD_DOWN>; |
| 56 |
}; |
| 57 |
|
| 58 |
button-l1 { |
| 59 |
label = "Key L1"; |
| 60 |
gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */ |
| 61 |
linux,input-type = <EV_KEY>; |
| 62 |
linux,code = <BTN_TL>; |
| 63 |
}; |
| 64 |
|
| 65 |
button-l2 { |
| 66 |
label = "Key L2"; |
| 67 |
gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ |
| 68 |
linux,input-type = <EV_KEY>; |
| 69 |
linux,code = <BTN_TL2>; |
| 70 |
}; |
| 71 |
|
| 72 |
button-left { |
| 73 |
label = "D-Pad left"; |
| 74 |
gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ |
| 75 |
linux,input-type = <EV_KEY>; |
| 76 |
linux,code = <BTN_DPAD_LEFT>; |
| 77 |
}; |
| 78 |
|
| 79 |
button-menu { |
| 80 |
label = "Key Menu"; |
| 81 |
gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ |
| 82 |
linux,input-type = <EV_KEY>; |
| 83 |
linux,code = <BTN_MODE>; |
| 84 |
}; |
| 85 |
|
| 86 |
button-r1 { |
| 87 |
label = "Key R1"; |
| 88 |
gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ |
| 89 |
linux,input-type = <EV_KEY>; |
| 90 |
linux,code = <BTN_TR>; |
| 91 |
}; |
| 92 |
|
| 93 |
button-r2 { |
| 94 |
label = "Key R2"; |
| 95 |
gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */ |
| 96 |
linux,input-type = <EV_KEY>; |
| 97 |
linux,code = <BTN_TR2>; |
| 98 |
}; |
| 99 |
|
| 100 |
button-right { |
| 101 |
label = "D-Pad Right"; |
| 102 |
gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ |
| 103 |
linux,input-type = <EV_KEY>; |
| 104 |
linux,code = <BTN_DPAD_RIGHT>; |
| 105 |
}; |
| 106 |
|
| 107 |
button-select { |
| 108 |
label = "Key Select"; |
| 109 |
gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ |
| 110 |
linux,input-type = <EV_KEY>; |
| 111 |
linux,code = <BTN_SELECT>; |
| 112 |
}; |
| 113 |
button-start { |
| 114 |
label = "Key Start"; |
| 115 |
gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ |
| 116 |
linux,input-type = <EV_KEY>; |
| 117 |
linux,code = <BTN_START>; |
| 118 |
}; |
| 119 |
|
| 120 |
button-up { |
| 121 |
label = "D-Pad Up"; |
| 122 |
gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ |
| 123 |
linux,input-type = <EV_KEY>; |
| 124 |
linux,code = <BTN_DPAD_UP>; |
| 125 |
}; |
| 126 |
|
| 127 |
button-x { |
| 128 |
label = "Action-Pad X"; |
| 129 |
gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ |
| 130 |
linux,input-type = <EV_KEY>; |
| 131 |
linux,code = <BTN_NORTH>; |
| 132 |
}; |
| 133 |
|
| 134 |
button-y { |
| 135 |
label = "Action Pad Y"; |
| 136 |
gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */ |
| 137 |
linux,input-type = <EV_KEY>; |
| 138 |
linux,code = <BTN_WEST>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
gpio-keys-volume { |
| 143 |
compatible = "gpio-keys"; |
| 144 |
autorepeat; |
| 145 |
|
| 146 |
button-vol-up { |
| 147 |
label = "Key Volume Up"; |
| 148 |
gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */ |
| 149 |
linux,input-type = <EV_KEY>; |
| 150 |
linux,code = <KEY_VOLUMEUP>; |
| 151 |
}; |
| 152 |
|
| 153 |
button-vol-down { |
| 154 |
label = "Key Volume Down"; |
| 155 |
gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */ |
| 156 |
linux,input-type = <EV_KEY>; |
| 157 |
linux,code = <KEY_VOLUMEDOWN>; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
leds { |
| 162 |
compatible = "gpio-leds"; |
| 163 |
|
| 164 |
led-0 { |
| 165 |
function = LED_FUNCTION_POWER; |
| 166 |
color = <LED_COLOR_ID_GREEN>; |
| 167 |
gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */ |
| 168 |
default-state = "on"; |
| 169 |
}; |
| 170 |
|
| 171 |
led-1 { |
| 172 |
function = LED_FUNCTION_STATUS; |
| 173 |
color = <LED_COLOR_ID_GREEN>; |
| 174 |
gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; /* PI11 */ |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
reg_vcc5v: regulator-vcc5v { /* USB-C power input */ |
| 179 |
compatible = "regulator-fixed"; |
| 180 |
regulator-name = "vcc-5v"; |
| 181 |
regulator-min-microvolt = <5000000>; |
| 182 |
regulator-max-microvolt = <5000000>; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
&codec { |
| 187 |
/* Both speakers and headphone jack connected to 74HC4052D analog mux*/ |
| 188 |
allwinner,audio-routing = "Speaker", "LINEOUT", |
| 189 |
"Headphone", "LINEOUT"; |
| 190 |
allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5 |
| 191 |
hp-det-gpios = <&pio 8 3 GPIO_ACTIVE_HIGH>; // PI3 |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&cpu0 { |
| 196 |
cpu-supply = <®_dcdc1>; |
| 197 |
}; |
| 198 |
|
| 199 |
&ehci0 { |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&gpu { |
| 204 |
mali-supply = <®_dcdc2>; |
| 205 |
status = "okay"; |
| 206 |
}; |
| 207 |
|
| 208 |
&mmc0 { |
| 209 |
vmmc-supply = <®_cldo3>; |
| 210 |
disable-wp; |
| 211 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 212 |
bus-width = <4>; |
| 213 |
status = "okay"; |
| 214 |
}; |
| 215 |
|
| 216 |
&ohci0 { |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&pio { |
| 221 |
vcc-pa-supply = <®_cldo3>; |
| 222 |
vcc-pc-supply = <®_cldo3>; |
| 223 |
vcc-pe-supply = <®_cldo3>; |
| 224 |
vcc-pf-supply = <®_cldo3>; |
| 225 |
vcc-pg-supply = <®_aldo4>; |
| 226 |
vcc-ph-supply = <®_cldo3>; |
| 227 |
vcc-pi-supply = <®_cldo3>; |
| 228 |
}; |
| 229 |
|
| 230 |
&r_i2c { |
| 231 |
status = "okay"; |
| 232 |
|
| 233 |
axp717: pmic@34 { |
| 234 |
compatible = "x-powers,axp717"; |
| 235 |
reg = <0x34>; |
| 236 |
interrupt-controller; |
| 237 |
#interrupt-cells = <1>; |
| 238 |
interrupt-parent = <&nmi_intc>; |
| 239 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 240 |
|
| 241 |
vin1-supply = <®_vcc5v>; |
| 242 |
vin2-supply = <®_vcc5v>; |
| 243 |
vin3-supply = <®_vcc5v>; |
| 244 |
vin4-supply = <®_vcc5v>; |
| 245 |
|
| 246 |
axp_adc: adc { |
| 247 |
compatible = "x-powers,axp717-adc"; |
| 248 |
#io-channel-cells = <1>; |
| 249 |
}; |
| 250 |
|
| 251 |
battery_power: battery-power { |
| 252 |
compatible = "x-powers,axp717-battery-power-supply"; |
| 253 |
monitored-battery = <&battery>; |
| 254 |
x-powers,no-thermistor; |
| 255 |
}; |
| 256 |
|
| 257 |
regulators { |
| 258 |
reg_dcdc1: dcdc1 { |
| 259 |
regulator-always-on; |
| 260 |
regulator-min-microvolt = <900000>; |
| 261 |
regulator-max-microvolt = <1160000>; |
| 262 |
regulator-name = "vdd-cpu"; |
| 263 |
}; |
| 264 |
|
| 265 |
reg_dcdc2: dcdc2 { |
| 266 |
regulator-always-on; |
| 267 |
regulator-min-microvolt = <940000>; |
| 268 |
regulator-max-microvolt = <940000>; |
| 269 |
regulator-name = "vdd-gpu-sys"; |
| 270 |
}; |
| 271 |
|
| 272 |
reg_dcdc3: dcdc3 { |
| 273 |
regulator-always-on; |
| 274 |
regulator-min-microvolt = <1100000>; |
| 275 |
regulator-max-microvolt = <1100000>; |
| 276 |
regulator-name = "vdd-dram"; |
| 277 |
}; |
| 278 |
|
| 279 |
reg_aldo1: aldo1 { |
| 280 |
/* 1.8v - unused */ |
| 281 |
}; |
| 282 |
|
| 283 |
reg_aldo2: aldo2 { |
| 284 |
/* 1.8v - unused */ |
| 285 |
}; |
| 286 |
|
| 287 |
reg_aldo3: aldo3 { |
| 288 |
/* 1.8v - unused */ |
| 289 |
}; |
| 290 |
|
| 291 |
reg_aldo4: aldo4 { |
| 292 |
regulator-min-microvolt = <1800000>; |
| 293 |
regulator-max-microvolt = <1800000>; |
| 294 |
regulator-name = "avcc"; |
| 295 |
}; |
| 296 |
|
| 297 |
reg_bldo1: bldo1 { |
| 298 |
/* 1.8v - unused */ |
| 299 |
}; |
| 300 |
|
| 301 |
reg_bldo2: bldo2 { |
| 302 |
regulator-always-on; |
| 303 |
regulator-min-microvolt = <1800000>; |
| 304 |
regulator-max-microvolt = <1800000>; |
| 305 |
regulator-name = "vcc-pll"; |
| 306 |
}; |
| 307 |
|
| 308 |
reg_bldo3: bldo3 { |
| 309 |
/* 2.8v - unused */ |
| 310 |
}; |
| 311 |
|
| 312 |
reg_bldo4: bldo4 { |
| 313 |
/* 1.2v - unused */ |
| 314 |
}; |
| 315 |
|
| 316 |
reg_cldo1: cldo1 { |
| 317 |
regulator-always-on; |
| 318 |
regulator-min-microvolt = <3300000>; |
| 319 |
regulator-max-microvolt = <3300000>; |
| 320 |
regulator-name = "vcc-spkr-amp"; |
| 321 |
}; |
| 322 |
|
| 323 |
reg_cldo2: cldo2 { |
| 324 |
/* 3.3v - unused */ |
| 325 |
}; |
| 326 |
|
| 327 |
reg_cldo3: cldo3 { |
| 328 |
regulator-always-on; |
| 329 |
regulator-min-microvolt = <3300000>; |
| 330 |
regulator-max-microvolt = <3300000>; |
| 331 |
regulator-name = "vcc-io"; |
| 332 |
}; |
| 333 |
|
| 334 |
reg_cldo4: cldo4 { |
| 335 |
regulator-min-microvolt = <3300000>; |
| 336 |
regulator-max-microvolt = <3300000>; |
| 337 |
regulator-name = "vcc-wifi"; |
| 338 |
}; |
| 339 |
|
| 340 |
reg_boost: boost { |
| 341 |
regulator-min-microvolt = <5000000>; |
| 342 |
regulator-max-microvolt = <5200000>; |
| 343 |
regulator-name = "boost"; |
| 344 |
}; |
| 345 |
|
| 346 |
/* |
| 347 |
* Regulator function is unknown, but reading |
| 348 |
* GPIO values in bootloader is inconsistent |
| 349 |
* on reboot if this is disabled. Setting to |
| 350 |
* default value from regulator OTP mem. |
| 351 |
*/ |
| 352 |
reg_cpusldo: cpusldo { |
| 353 |
regulator-always-on; |
| 354 |
regulator-boot-on; |
| 355 |
regulator-min-microvolt = <900000>; |
| 356 |
regulator-max-microvolt = <900000>; |
| 357 |
}; |
| 358 |
}; |
| 359 |
|
| 360 |
usb_power: usb-power { |
| 361 |
compatible = "x-powers,axp717-usb-power-supply"; |
| 362 |
input-current-limit-microamp = <1500000>; |
| 363 |
}; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
&uart0 { |
| 368 |
pinctrl-names = "default"; |
| 369 |
pinctrl-0 = <&uart0_ph_pins>; |
| 370 |
status = "okay"; |
| 371 |
}; |
| 372 |
|
| 373 |
/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */ |
| 374 |
&usbotg { |
| 375 |
dr_mode = "peripheral"; /* USB type-C receptable */ |
| 376 |
status = "okay"; |
| 377 |
}; |
| 378 |
|
| 379 |
&usbphy { |
| 380 |
status = "okay"; |
| 381 |
}; |