| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (C) 2023 Arm Ltd. |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "sun50i-h616.dtsi" |
| 9 |
#include "sun50i-h616-cpu-opp.dtsi" |
| 10 |
|
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Transpeed 8K618-T"; |
| 16 |
compatible = "transpeed,8k618-t", "allwinner,sun50i-h618"; |
| 17 |
|
| 18 |
aliases { |
| 19 |
ethernet1 = &sdio_wifi; |
| 20 |
serial0 = &uart0; |
| 21 |
}; |
| 22 |
|
| 23 |
chosen { |
| 24 |
stdout-path = "serial0:115200n8"; |
| 25 |
}; |
| 26 |
|
| 27 |
reg_vcc5v: vcc5v { |
| 28 |
/* board wide 5V supply directly from the DC input */ |
| 29 |
compatible = "regulator-fixed"; |
| 30 |
regulator-name = "vcc-5v"; |
| 31 |
regulator-min-microvolt = <5000000>; |
| 32 |
regulator-max-microvolt = <5000000>; |
| 33 |
regulator-always-on; |
| 34 |
}; |
| 35 |
|
| 36 |
reg_vcc3v3: vcc3v3 { |
| 37 |
/* discrete 3.3V regulator */ |
| 38 |
compatible = "regulator-fixed"; |
| 39 |
regulator-name = "vcc-3v3"; |
| 40 |
regulator-min-microvolt = <3300000>; |
| 41 |
regulator-max-microvolt = <3300000>; |
| 42 |
regulator-always-on; |
| 43 |
}; |
| 44 |
|
| 45 |
wifi_pwrseq: pwrseq { |
| 46 |
compatible = "mmc-pwrseq-simple"; |
| 47 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 48 |
clock-names = "ext_clock"; |
| 49 |
pinctrl-0 = <&x32clk_fanout_pin>; |
| 50 |
pinctrl-names = "default"; |
| 51 |
reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
&codec { |
| 56 |
allwinner,audio-routing = "Line Out", "LINEOUT"; |
| 57 |
status = "okay"; |
| 58 |
}; |
| 59 |
|
| 60 |
&cpu0 { |
| 61 |
cpu-supply = <®_dcdc2>; |
| 62 |
}; |
| 63 |
|
| 64 |
&ehci0 { |
| 65 |
status = "okay"; |
| 66 |
}; |
| 67 |
|
| 68 |
&ehci1 { |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
&gpu { |
| 73 |
mali-supply = <®_dcdc1>; |
| 74 |
status = "okay"; |
| 75 |
}; |
| 76 |
|
| 77 |
&ir { |
| 78 |
status = "okay"; |
| 79 |
}; |
| 80 |
|
| 81 |
&mmc0 { |
| 82 |
vmmc-supply = <®_dldo1>; |
| 83 |
cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ |
| 84 |
disable-wp; |
| 85 |
bus-width = <4>; |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
&mmc1 { |
| 90 |
vmmc-supply = <®_dldo1>; |
| 91 |
vqmmc-supply = <®_aldo1>; |
| 92 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 93 |
bus-width = <4>; |
| 94 |
non-removable; |
| 95 |
status = "okay"; |
| 96 |
|
| 97 |
sdio_wifi: wifi@1 { |
| 98 |
reg = <1>; |
| 99 |
}; |
| 100 |
}; |
| 101 |
|
| 102 |
&mmc2 { |
| 103 |
vmmc-supply = <®_dldo1>; |
| 104 |
vqmmc-supply = <®_aldo1>; |
| 105 |
bus-width = <8>; |
| 106 |
non-removable; |
| 107 |
cap-mmc-hw-reset; |
| 108 |
mmc-ddr-1_8v; |
| 109 |
mmc-hs200-1_8v; |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&ohci0 { |
| 114 |
status = "okay"; |
| 115 |
}; |
| 116 |
|
| 117 |
&ohci1 { |
| 118 |
status = "okay"; |
| 119 |
}; |
| 120 |
|
| 121 |
&r_i2c { |
| 122 |
status = "okay"; |
| 123 |
|
| 124 |
axp313: pmic@36 { |
| 125 |
compatible = "x-powers,axp313a"; |
| 126 |
reg = <0x36>; |
| 127 |
#interrupt-cells = <1>; |
| 128 |
interrupt-controller; |
| 129 |
|
| 130 |
vin1-supply = <®_vcc5v>; |
| 131 |
vin2-supply = <®_vcc5v>; |
| 132 |
vin3-supply = <®_vcc5v>; |
| 133 |
|
| 134 |
regulators { |
| 135 |
reg_aldo1: aldo1 { |
| 136 |
regulator-always-on; |
| 137 |
regulator-min-microvolt = <1800000>; |
| 138 |
regulator-max-microvolt = <1800000>; |
| 139 |
regulator-name = "vcc-1v8-pll"; |
| 140 |
}; |
| 141 |
|
| 142 |
reg_dldo1: dldo1 { |
| 143 |
regulator-always-on; |
| 144 |
regulator-min-microvolt = <3300000>; |
| 145 |
regulator-max-microvolt = <3300000>; |
| 146 |
regulator-name = "vcc-3v3-io-mmc"; |
| 147 |
}; |
| 148 |
|
| 149 |
reg_dcdc1: dcdc1 { |
| 150 |
regulator-always-on; |
| 151 |
regulator-min-microvolt = <810000>; |
| 152 |
regulator-max-microvolt = <990000>; |
| 153 |
regulator-name = "vdd-gpu-sys"; |
| 154 |
}; |
| 155 |
|
| 156 |
reg_dcdc2: dcdc2 { |
| 157 |
regulator-always-on; |
| 158 |
regulator-min-microvolt = <810000>; |
| 159 |
regulator-max-microvolt = <1100000>; |
| 160 |
regulator-name = "vdd-cpu"; |
| 161 |
}; |
| 162 |
|
| 163 |
reg_dcdc3: dcdc3 { |
| 164 |
regulator-always-on; |
| 165 |
regulator-min-microvolt = <1360000>; |
| 166 |
regulator-max-microvolt = <1360000>; |
| 167 |
regulator-name = "vdd-dram"; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
&pio { |
| 174 |
vcc-pc-supply = <®_aldo1>; |
| 175 |
vcc-pg-supply = <®_dldo1>; |
| 176 |
vcc-ph-supply = <®_dldo1>; |
| 177 |
vcc-pi-supply = <®_dldo1>; |
| 178 |
}; |
| 179 |
|
| 180 |
&uart0 { |
| 181 |
pinctrl-names = "default"; |
| 182 |
pinctrl-0 = <&uart0_ph_pins>; |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&uart1 { |
| 187 |
pinctrl-names = "default"; |
| 188 |
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; |
| 189 |
uart-has-rtscts; |
| 190 |
status = "okay"; |
| 191 |
}; |
| 192 |
|
| 193 |
&usbotg { |
| 194 |
dr_mode = "host"; /* USB A type receptable */ |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&usbphy { |
| 199 |
status = "okay"; |
| 200 |
}; |