Debian Codegraph @

scripts/dtc/include-prefixes/arm64/allwinner/sun50i-h616.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (C) 2020 Arm Ltd.
3 // based on the H6 dtsi, which is:
4 // Copyright (C) 2017 Icenowy Zheng <[email protected]>
5
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/sun50i-h616-ccu.h>
8 #include <dt-bindings/clock/sun50i-h6-r-ccu.h>
9 #include <dt-bindings/clock/sun6i-rtc.h>
10 #include <dt-bindings/reset/sun50i-h616-ccu.h>
11 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
12 #include <dt-bindings/thermal/thermal.h>
13
14 / {
15 interrupt-parent = <&gic>;
16 #address-cells = <2>;
17 #size-cells = <2>;
18
19 cpus {
20 #address-cells = <1>;
21 #size-cells = <0>;
22
23 cpu0: cpu@0 {
24 compatible = "arm,cortex-a53";
25 device_type = "cpu";
26 reg = <0>;
27 enable-method = "psci";
28 clocks = <&ccu CLK_CPUX>;
29 #cooling-cells = <2>;
30 i-cache-size = <0x8000>;
31 i-cache-line-size = <64>;
32 i-cache-sets = <256>;
33 d-cache-size = <0x8000>;
34 d-cache-line-size = <64>;
35 d-cache-sets = <128>;
36 next-level-cache = <&l2_cache>;
37 };
38
39 cpu1: cpu@1 {
40 compatible = "arm,cortex-a53";
41 device_type = "cpu";
42 reg = <1>;
43 enable-method = "psci";
44 clocks = <&ccu CLK_CPUX>;
45 #cooling-cells = <2>;
46 i-cache-size = <0x8000>;
47 i-cache-line-size = <64>;
48 i-cache-sets = <256>;
49 d-cache-size = <0x8000>;
50 d-cache-line-size = <64>;
51 d-cache-sets = <128>;
52 next-level-cache = <&l2_cache>;
53 };
54
55 cpu2: cpu@2 {
56 compatible = "arm,cortex-a53";
57 device_type = "cpu";
58 reg = <2>;
59 enable-method = "psci";
60 clocks = <&ccu CLK_CPUX>;
61 #cooling-cells = <2>;
62 i-cache-size = <0x8000>;
63 i-cache-line-size = <64>;
64 i-cache-sets = <256>;
65 d-cache-size = <0x8000>;
66 d-cache-line-size = <64>;
67 d-cache-sets = <128>;
68 next-level-cache = <&l2_cache>;
69 };
70
71 cpu3: cpu@3 {
72 compatible = "arm,cortex-a53";
73 device_type = "cpu";
74 reg = <3>;
75 enable-method = "psci";
76 clocks = <&ccu CLK_CPUX>;
77 #cooling-cells = <2>;
78 i-cache-size = <0x8000>;
79 i-cache-line-size = <64>;
80 i-cache-sets = <256>;
81 d-cache-size = <0x8000>;
82 d-cache-line-size = <64>;
83 d-cache-sets = <128>;
84 next-level-cache = <&l2_cache>;
85 };
86
87 l2_cache: l2-cache {
88 compatible = "cache";
89 cache-level = <2>;
90 cache-unified;
91 cache-size = <0x40000>;
92 cache-line-size = <64>;
93 cache-sets = <256>;
94 };
95 };
96
97 reserved-memory {
98 #address-cells = <2>;
99 #size-cells = <2>;
100 ranges;
101
102 /*
103 * 256 KiB reserved for Trusted Firmware-A (BL31).
104 * This is added by BL31 itself, but some bootloaders fail
105 * to propagate this into the DTB handed to kernels.
106 */
107 secmon@40000000 {
108 reg = <0x0 0x40000000 0x0 0x40000>;
109 no-map;
110 };
111 };
112
113 osc24M: osc24M-clk {
114 #clock-cells = <0>;
115 compatible = "fixed-clock";
116 clock-frequency = <24000000>;
117 clock-output-names = "osc24M";
118 };
119
120 pmu {
121 compatible = "arm,cortex-a53-pmu";
122 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
123 <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
124 <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
125 <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
126 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
127 };
128
129 psci {
130 compatible = "arm,psci-0.2";
131 method = "smc";
132 };
133
134 timer {
135 compatible = "arm,armv8-timer";
136 arm,no-tick-in-suspend;
137 interrupts = <GIC_PPI 13
138 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
139 <GIC_PPI 14
140 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
141 <GIC_PPI 11
142 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
143 <GIC_PPI 10
144 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
145 };
146
147 soc {
148 compatible = "simple-bus";
149 #address-cells = <1>;
150 #size-cells = <1>;
151 ranges = <0x0 0x0 0x0 0x40000000>;
152
153 gpu: gpu@1800000 {
154 compatible = "allwinner,sun50i-h616-mali",
155 "arm,mali-bifrost";
156 reg = <0x1800000 0x40000>;
157 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
158 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
159 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
160 interrupt-names = "job", "mmu", "gpu";
161 clocks = <&ccu CLK_GPU0>, <&ccu CLK_BUS_GPU>;
162 clock-names = "core", "bus";
163 power-domains = <&prcm_ppu 2>;
164 resets = <&ccu RST_BUS_GPU>;
165 status = "disabled";
166 };
167
168 crypto: crypto@1904000 {
169 compatible = "allwinner,sun50i-h616-crypto";
170 reg = <0x01904000 0x800>;
171 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
172 clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>,
173 <&ccu CLK_MBUS_CE>, <&rtc CLK_IOSC>;
174 clock-names = "bus", "mod", "ram", "trng";
175 resets = <&ccu RST_BUS_CE>;
176 };
177
178 syscon: syscon@3000000 {
179 compatible = "allwinner,sun50i-h616-system-control";
180 reg = <0x03000000 0x1000>;
181 #address-cells = <1>;
182 #size-cells = <1>;
183 ranges;
184
185 sram_c: sram@28000 {
186 compatible = "mmio-sram";
187 reg = <0x00028000 0x30000>;
188 #address-cells = <1>;
189 #size-cells = <1>;
190 ranges = <0 0x00028000 0x30000>;
191 };
192 };
193
194 ccu: clock@3001000 {
195 compatible = "allwinner,sun50i-h616-ccu";
196 reg = <0x03001000 0x1000>;
197 clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
198 clock-names = "hosc", "losc", "iosc";
199 #clock-cells = <1>;
200 #reset-cells = <1>;
201 };
202
203 dma: dma-controller@3002000 {
204 compatible = "allwinner,sun50i-h616-dma",
205 "allwinner,sun50i-a100-dma";
206 reg = <0x03002000 0x1000>;
207 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
208 clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
209 clock-names = "bus", "mbus";
210 dma-channels = <16>;
211 dma-requests = <49>;
212 resets = <&ccu RST_BUS_DMA>;
213 #dma-cells = <1>;
214 };
215
216 sid: efuse@3006000 {
217 compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
218 reg = <0x03006000 0x1000>;
219 #address-cells = <1>;
220 #size-cells = <1>;
221
222 ths_calibration: thermal-sensor-calibration@14 {
223 reg = <0x14 0x8>;
224 };
225
226 cpu_speed_grade: cpu-speed-grade@0 {
227 reg = <0x0 2>;
228 };
229 };
230
231 watchdog: watchdog@30090a0 {
232 compatible = "allwinner,sun50i-h616-wdt",
233 "allwinner,sun6i-a31-wdt";
234 reg = <0x030090a0 0x20>;
235 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
236 clocks = <&osc24M>;
237 };
238
239 pio: pinctrl@300b000 {
240 compatible = "allwinner,sun50i-h616-pinctrl";
241 reg = <0x0300b000 0x400>;
242 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
243 <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
244 <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
245 <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
246 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
247 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
248 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
249 <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
250 clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
251 clock-names = "apb", "hosc", "losc";
252 gpio-controller;
253 #gpio-cells = <3>;
254 interrupt-controller;
255 #interrupt-cells = <3>;
256
257 ext_rgmii_pins: rgmii-pins {
258 pins = "PI0", "PI1", "PI2", "PI3", "PI4",
259 "PI5", "PI7", "PI8", "PI9", "PI10",
260 "PI11", "PI12", "PI13", "PI14", "PI15",
261 "PI16";
262 function = "emac0";
263 drive-strength = <40>;
264 };
265
266 i2c0_pins: i2c0-pins {
267 pins = "PI5", "PI6";
268 function = "i2c0";
269 };
270
271 i2c3_ph_pins: i2c3-ph-pins {
272 pins = "PH4", "PH5";
273 function = "i2c3";
274 };
275
276 ir_rx_pin: ir-rx-pin {
277 pins = "PH10";
278 function = "ir_rx";
279 };
280
281 mmc0_pins: mmc0-pins {
282 pins = "PF0", "PF1", "PF2", "PF3",
283 "PF4", "PF5";
284 function = "mmc0";
285 drive-strength = <30>;
286 bias-pull-up;
287 };
288
289 /omit-if-no-ref/
290 mmc1_pins: mmc1-pins {
291 pins = "PG0", "PG1", "PG2", "PG3",
292 "PG4", "PG5";
293 function = "mmc1";
294 drive-strength = <30>;
295 bias-pull-up;
296 };
297
298 mmc2_pins: mmc2-pins {
299 pins = "PC0", "PC1", "PC5", "PC6",
300 "PC8", "PC9", "PC10", "PC11",
301 "PC13", "PC14", "PC15", "PC16";
302 function = "mmc2";
303 drive-strength = <30>;
304 bias-pull-up;
305 };
306
307 /omit-if-no-ref/
308 nand_pins: nand-pins {
309 pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9",
310 "PC10", "PC11", "PC12", "PC13", "PC14",
311 "PC15", "PC16";
312 function = "nand0";
313 };
314
315 /omit-if-no-ref/
316 nand_cs0_pin: nand-cs0-pin {
317 pins = "PC4";
318 function = "nand0";
319 bias-pull-up;
320 };
321
322 /omit-if-no-ref/
323 nand_cs1_pin: nand-cs1-pin {
324 pins = "PC3";
325 function = "nand0";
326 bias-pull-up;
327 };
328
329 /omit-if-no-ref/
330 nand_rb0_pin: nand-rb0-pin {
331 pins = "PC6";
332 function = "nand0";
333 bias-pull-up;
334 };
335
336 /omit-if-no-ref/
337 nand_rb1_pin: nand-rb1-pin {
338 pins = "PC7";
339 function = "nand0";
340 bias-pull-up;
341 };
342
343 /omit-if-no-ref/
344 spi0_pins: spi0-pins {
345 pins = "PC0", "PC2", "PC4";
346 function = "spi0";
347 };
348
349 /omit-if-no-ref/
350 spi0_cs0_pin: spi0-cs0-pin {
351 pins = "PC3";
352 function = "spi0";
353 };
354
355 /omit-if-no-ref/
356 spi1_pins: spi1-pins {
357 pins = "PH6", "PH7", "PH8";
358 function = "spi1";
359 };
360
361 /omit-if-no-ref/
362 spi1_cs0_pin: spi1-cs0-pin {
363 pins = "PH5";
364 function = "spi1";
365 };
366
367 spdif_tx_pin: spdif-tx-pin {
368 pins = "PH4";
369 function = "spdif";
370 };
371
372 uart0_ph_pins: uart0-ph-pins {
373 pins = "PH0", "PH1";
374 function = "uart0";
375 };
376
377 /omit-if-no-ref/
378 uart1_pins: uart1-pins {
379 pins = "PG6", "PG7";
380 function = "uart1";
381 };
382
383 /omit-if-no-ref/
384 uart1_rts_cts_pins: uart1-rts-cts-pins {
385 pins = "PG8", "PG9";
386 function = "uart1";
387 };
388
389 /omit-if-no-ref/
390 x32clk_fanout_pin: x32clk-fanout-pin {
391 pins = "PG10";
392 function = "clock";
393 };
394 };
395
396 gic: interrupt-controller@3021000 {
397 compatible = "arm,gic-400";
398 reg = <0x03021000 0x1000>,
399 <0x03022000 0x2000>,
400 <0x03024000 0x2000>,
401 <0x03026000 0x2000>;
402 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
403 interrupt-controller;
404 #interrupt-cells = <3>;
405 };
406
407 iommu: iommu@30f0000 {
408 compatible = "allwinner,sun50i-h616-iommu";
409 reg = <0x030f0000 0x10000>;
410 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
411 clocks = <&ccu CLK_BUS_IOMMU>;
412 resets = <&ccu RST_BUS_IOMMU>;
413 #iommu-cells = <1>;
414 };
415
416 nfc: nand-controller@4011000 {
417 compatible = "allwinner,sun50i-h616-nand-controller";
418 reg = <0x04011000 0x1000>;
419 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
420 clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND0>,
421 <&ccu CLK_NAND1>, <&ccu CLK_MBUS_NAND>;
422 clock-names = "ahb", "mod", "ecc", "mbus";
423 resets = <&ccu RST_BUS_NAND>;
424 reset-names = "ahb";
425 dmas = <&dma 10>;
426 dma-names = "rxtx";
427 #address-cells = <1>;
428 #size-cells = <0>;
429 status = "disabled";
430 };
431
432 mmc0: mmc@4020000 {
433 compatible = "allwinner,sun50i-h616-mmc",
434 "allwinner,sun50i-a100-mmc";
435 reg = <0x04020000 0x1000>;
436 clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
437 clock-names = "ahb", "mmc";
438 resets = <&ccu RST_BUS_MMC0>;
439 reset-names = "ahb";
440 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
441 pinctrl-names = "default";
442 pinctrl-0 = <&mmc0_pins>;
443 status = "disabled";
444 max-frequency = <150000000>;
445 cap-sd-highspeed;
446 cap-mmc-highspeed;
447 mmc-ddr-3_3v;
448 cap-sdio-irq;
449 #address-cells = <1>;
450 #size-cells = <0>;
451 };
452
453 mmc1: mmc@4021000 {
454 compatible = "allwinner,sun50i-h616-mmc",
455 "allwinner,sun50i-a100-mmc";
456 reg = <0x04021000 0x1000>;
457 clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
458 clock-names = "ahb", "mmc";
459 resets = <&ccu RST_BUS_MMC1>;
460 reset-names = "ahb";
461 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
462 pinctrl-names = "default";
463 pinctrl-0 = <&mmc1_pins>;
464 status = "disabled";
465 max-frequency = <150000000>;
466 cap-sd-highspeed;
467 cap-mmc-highspeed;
468 mmc-ddr-3_3v;
469 cap-sdio-irq;
470 #address-cells = <1>;
471 #size-cells = <0>;
472 };
473
474 mmc2: mmc@4022000 {
475 compatible = "allwinner,sun50i-h616-emmc",
476 "allwinner,sun50i-a100-emmc";
477 reg = <0x04022000 0x1000>;
478 clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
479 clock-names = "ahb", "mmc";
480 resets = <&ccu RST_BUS_MMC2>;
481 reset-names = "ahb";
482 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
483 pinctrl-names = "default";
484 pinctrl-0 = <&mmc2_pins>;
485 status = "disabled";
486 max-frequency = <150000000>;
487 cap-sd-highspeed;
488 cap-mmc-highspeed;
489 mmc-ddr-3_3v;
490 cap-sdio-irq;
491 #address-cells = <1>;
492 #size-cells = <0>;
493 };
494
495 uart0: serial@5000000 {
496 compatible = "snps,dw-apb-uart";
497 reg = <0x05000000 0x400>;
498 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
499 reg-shift = <2>;
500 reg-io-width = <4>;
501 clocks = <&ccu CLK_BUS_UART0>;
502 dmas = <&dma 14>, <&dma 14>;
503 dma-names = "tx", "rx";
504 resets = <&ccu RST_BUS_UART0>;
505 status = "disabled";
506 };
507
508 uart1: serial@5000400 {
509 compatible = "snps,dw-apb-uart";
510 reg = <0x05000400 0x400>;
511 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
512 reg-shift = <2>;
513 reg-io-width = <4>;
514 clocks = <&ccu CLK_BUS_UART1>;
515 dmas = <&dma 15>, <&dma 15>;
516 dma-names = "tx", "rx";
517 resets = <&ccu RST_BUS_UART1>;
518 status = "disabled";
519 };
520
521 uart2: serial@5000800 {
522 compatible = "snps,dw-apb-uart";
523 reg = <0x05000800 0x400>;
524 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
525 reg-shift = <2>;
526 reg-io-width = <4>;
527 clocks = <&ccu CLK_BUS_UART2>;
528 dmas = <&dma 16>, <&dma 16>;
529 dma-names = "tx", "rx";
530 resets = <&ccu RST_BUS_UART2>;
531 status = "disabled";
532 };
533
534 uart3: serial@5000c00 {
535 compatible = "snps,dw-apb-uart";
536 reg = <0x05000c00 0x400>;
537 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
538 reg-shift = <2>;
539 reg-io-width = <4>;
540 clocks = <&ccu CLK_BUS_UART3>;
541 dmas = <&dma 17>, <&dma 17>;
542 dma-names = "tx", "rx";
543 resets = <&ccu RST_BUS_UART3>;
544 status = "disabled";
545 };
546
547 uart4: serial@5001000 {
548 compatible = "snps,dw-apb-uart";
549 reg = <0x05001000 0x400>;
550 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
551 reg-shift = <2>;
552 reg-io-width = <4>;
553 clocks = <&ccu CLK_BUS_UART4>;
554 dmas = <&dma 18>, <&dma 18>;
555 dma-names = "tx", "rx";
556 resets = <&ccu RST_BUS_UART4>;
557 status = "disabled";
558 };
559
560 uart5: serial@5001400 {
561 compatible = "snps,dw-apb-uart";
562 reg = <0x05001400 0x400>;
563 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
564 reg-shift = <2>;
565 reg-io-width = <4>;
566 clocks = <&ccu CLK_BUS_UART5>;
567 dmas = <&dma 19>, <&dma 19>;
568 dma-names = "tx", "rx";
569 resets = <&ccu RST_BUS_UART5>;
570 status = "disabled";
571 };
572
573 i2c0: i2c@5002000 {
574 compatible = "allwinner,sun50i-h616-i2c",
575 "allwinner,sun8i-v536-i2c",
576 "allwinner,sun6i-a31-i2c";
577 reg = <0x05002000 0x400>;
578 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
579 clocks = <&ccu CLK_BUS_I2C0>;
580 dmas = <&dma 43>, <&dma 43>;
581 dma-names = "rx", "tx";
582 resets = <&ccu RST_BUS_I2C0>;
583 pinctrl-names = "default";
584 pinctrl-0 = <&i2c0_pins>;
585 status = "disabled";
586 #address-cells = <1>;
587 #size-cells = <0>;
588 };
589
590 i2c1: i2c@5002400 {
591 compatible = "allwinner,sun50i-h616-i2c",
592 "allwinner,sun8i-v536-i2c",
593 "allwinner,sun6i-a31-i2c";
594 reg = <0x05002400 0x400>;
595 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
596 clocks = <&ccu CLK_BUS_I2C1>;
597 dmas = <&dma 44>, <&dma 44>;
598 dma-names = "rx", "tx";
599 resets = <&ccu RST_BUS_I2C1>;
600 status = "disabled";
601 #address-cells = <1>;
602 #size-cells = <0>;
603 };
604
605 i2c2: i2c@5002800 {
606 compatible = "allwinner,sun50i-h616-i2c",
607 "allwinner,sun8i-v536-i2c",
608 "allwinner,sun6i-a31-i2c";
609 reg = <0x05002800 0x400>;
610 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
611 clocks = <&ccu CLK_BUS_I2C2>;
612 dmas = <&dma 45>, <&dma 45>;
613 dma-names = "rx", "tx";
614 resets = <&ccu RST_BUS_I2C2>;
615 status = "disabled";
616 #address-cells = <1>;
617 #size-cells = <0>;
618 };
619
620 i2c3: i2c@5002c00 {
621 compatible = "allwinner,sun50i-h616-i2c",
622 "allwinner,sun8i-v536-i2c",
623 "allwinner,sun6i-a31-i2c";
624 reg = <0x05002c00 0x400>;
625 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
626 clocks = <&ccu CLK_BUS_I2C3>;
627 dmas = <&dma 46>, <&dma 46>;
628 dma-names = "rx", "tx";
629 resets = <&ccu RST_BUS_I2C3>;
630 status = "disabled";
631 #address-cells = <1>;
632 #size-cells = <0>;
633 };
634
635 i2c4: i2c@5003000 {
636 compatible = "allwinner,sun50i-h616-i2c",
637 "allwinner,sun8i-v536-i2c",
638 "allwinner,sun6i-a31-i2c";
639 reg = <0x05003000 0x400>;
640 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
641 clocks = <&ccu CLK_BUS_I2C4>;
642 dmas = <&dma 47>, <&dma 47>;
643 dma-names = "rx", "tx";
644 resets = <&ccu RST_BUS_I2C4>;
645 status = "disabled";
646 #address-cells = <1>;
647 #size-cells = <0>;
648 };
649
650 spi0: spi@5010000 {
651 compatible = "allwinner,sun50i-h616-spi",
652 "allwinner,sun8i-h3-spi";
653 reg = <0x05010000 0x1000>;
654 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
655 clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
656 clock-names = "ahb", "mod";
657 dmas = <&dma 22>, <&dma 22>;
658 dma-names = "rx", "tx";
659 resets = <&ccu RST_BUS_SPI0>;
660 status = "disabled";
661 #address-cells = <1>;
662 #size-cells = <0>;
663 };
664
665 spi1: spi@5011000 {
666 compatible = "allwinner,sun50i-h616-spi",
667 "allwinner,sun8i-h3-spi";
668 reg = <0x05011000 0x1000>;
669 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
670 clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
671 clock-names = "ahb", "mod";
672 dmas = <&dma 23>, <&dma 23>;
673 dma-names = "rx", "tx";
674 resets = <&ccu RST_BUS_SPI1>;
675 status = "disabled";
676 #address-cells = <1>;
677 #size-cells = <0>;
678 };
679
680 emac0: ethernet@5020000 {
681 compatible = "allwinner,sun50i-h616-emac0",
682 "allwinner,sun50i-a64-emac";
683 reg = <0x05020000 0x10000>;
684 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
685 interrupt-names = "macirq";
686 clocks = <&ccu CLK_BUS_EMAC0>;
687 clock-names = "stmmaceth";
688 resets = <&ccu RST_BUS_EMAC0>;
689 reset-names = "stmmaceth";
690 syscon = <&syscon>;
691 status = "disabled";
692
693 mdio0: mdio {
694 compatible = "snps,dwmac-mdio";
695 #address-cells = <1>;
696 #size-cells = <0>;
697 };
698 };
699
700 gpadc: adc@5070000 {
701 compatible = "allwinner,sun50i-h616-gpadc",
702 "allwinner,sun20i-d1-gpadc";
703 reg = <0x05070000 0x400>;
704 clocks = <&ccu CLK_BUS_GPADC>;
705 resets = <&ccu RST_BUS_GPADC>;
706 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
707 status = "disabled";
708 #io-channel-cells = <1>;
709 };
710
711 ths: thermal-sensor@5070400 {
712 compatible = "allwinner,sun50i-h616-ths";
713 reg = <0x05070400 0x400>;
714 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
715 clocks = <&ccu CLK_BUS_THS>;
716 clock-names = "bus";
717 resets = <&ccu RST_BUS_THS>;
718 nvmem-cells = <&ths_calibration>;
719 nvmem-cell-names = "calibration";
720 allwinner,sram = <&syscon>;
721 #thermal-sensor-cells = <1>;
722 };
723
724 lradc: lradc@5070800 {
725 compatible = "allwinner,sun50i-h616-lradc",
726 "allwinner,sun50i-r329-lradc";
727 reg = <0x05070800 0x400>;
728 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
729 clocks = <&ccu CLK_BUS_KEYADC>;
730 resets = <&ccu RST_BUS_KEYADC>;
731 status = "disabled";
732 };
733
734 spdif: spdif@5093000 {
735 compatible = "allwinner,sun50i-h616-spdif";
736 reg = <0x05093000 0x400>;
737 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
738 clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
739 clock-names = "apb", "spdif";
740 resets = <&ccu RST_BUS_SPDIF>;
741 dmas = <&dma 2>;
742 dma-names = "tx";
743 pinctrl-names = "default";
744 pinctrl-0 = <&spdif_tx_pin>;
745 #sound-dai-cells = <0>;
746 status = "disabled";
747 };
748
749 codec: codec@5096000 {
750 #sound-dai-cells = <0>;
751 compatible = "allwinner,sun50i-h616-codec";
752 reg = <0x05096000 0x31c>;
753 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
754 clocks = <&ccu CLK_BUS_AUDIO_CODEC>,
755 <&ccu CLK_AUDIO_CODEC_1X>;
756 clock-names = "apb", "codec";
757 resets = <&ccu RST_BUS_AUDIO_CODEC>;
758 dmas = <&dma 6>;
759 dma-names = "tx";
760 status = "disabled";
761 };
762
763 usbotg: usb@5100000 {
764 compatible = "allwinner,sun50i-h616-musb",
765 "allwinner,sun8i-h3-musb";
766 reg = <0x05100000 0x0400>;
767 clocks = <&ccu CLK_BUS_OTG>;
768 resets = <&ccu RST_BUS_OTG>;
769 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
770 interrupt-names = "mc";
771 phys = <&usbphy 0>;
772 phy-names = "usb";
773 extcon = <&usbphy 0>;
774 status = "disabled";
775 };
776
777 usbphy: phy@5100400 {
778 compatible = "allwinner,sun50i-h616-usb-phy";
779 reg = <0x05100400 0x24>,
780 <0x05101800 0x14>,
781 <0x05200800 0x14>,
782 <0x05310800 0x14>,
783 <0x05311800 0x14>;
784 reg-names = "phy_ctrl",
785 "pmu0",
786 "pmu1",
787 "pmu2",
788 "pmu3";
789 clocks = <&ccu CLK_USB_PHY0>,
790 <&ccu CLK_USB_PHY1>,
791 <&ccu CLK_USB_PHY2>,
792 <&ccu CLK_USB_PHY3>,
793 <&ccu CLK_BUS_EHCI2>;
794 clock-names = "usb0_phy",
795 "usb1_phy",
796 "usb2_phy",
797 "usb3_phy",
798 "pmu2_clk";
799 resets = <&ccu RST_USB_PHY0>,
800 <&ccu RST_USB_PHY1>,
801 <&ccu RST_USB_PHY2>,
802 <&ccu RST_USB_PHY3>;
803 reset-names = "usb0_reset",
804 "usb1_reset",
805 "usb2_reset",
806 "usb3_reset";
807 status = "disabled";
808 #phy-cells = <1>;
809 };
810
811 ehci0: usb@5101000 {
812 compatible = "allwinner,sun50i-h616-ehci",
813 "generic-ehci";
814 reg = <0x05101000 0x100>;
815 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
816 clocks = <&ccu CLK_BUS_OHCI0>,
817 <&ccu CLK_BUS_EHCI0>,
818 <&ccu CLK_USB_OHCI0>;
819 resets = <&ccu RST_BUS_OHCI0>,
820 <&ccu RST_BUS_EHCI0>;
821 phys = <&usbphy 0>;
822 phy-names = "usb";
823 status = "disabled";
824 };
825
826 ohci0: usb@5101400 {
827 compatible = "allwinner,sun50i-h616-ohci",
828 "generic-ohci";
829 reg = <0x05101400 0x100>;
830 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
831 clocks = <&ccu CLK_BUS_OHCI0>,
832 <&ccu CLK_USB_OHCI0>;
833 resets = <&ccu RST_BUS_OHCI0>;
834 phys = <&usbphy 0>;
835 phy-names = "usb";
836 status = "disabled";
837 };
838
839 ehci1: usb@5200000 {
840 compatible = "allwinner,sun50i-h616-ehci",
841 "generic-ehci";
842 reg = <0x05200000 0x100>;
843 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
844 clocks = <&ccu CLK_BUS_OHCI1>,
845 <&ccu CLK_BUS_EHCI1>,
846 <&ccu CLK_USB_OHCI1>;
847 resets = <&ccu RST_BUS_OHCI1>,
848 <&ccu RST_BUS_EHCI1>;
849 phys = <&usbphy 1>;
850 phy-names = "usb";
851 status = "disabled";
852 };
853
854 ohci1: usb@5200400 {
855 compatible = "allwinner,sun50i-h616-ohci",
856 "generic-ohci";
857 reg = <0x05200400 0x100>;
858 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
859 clocks = <&ccu CLK_BUS_OHCI1>,
860 <&ccu CLK_USB_OHCI1>;
861 resets = <&ccu RST_BUS_OHCI1>;
862 phys = <&usbphy 1>;
863 phy-names = "usb";
864 status = "disabled";
865 };
866
867 ehci2: usb@5310000 {
868 compatible = "allwinner,sun50i-h616-ehci",
869 "generic-ehci";
870 reg = <0x05310000 0x100>;
871 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
872 clocks = <&ccu CLK_BUS_OHCI2>,
873 <&ccu CLK_BUS_EHCI2>,
874 <&ccu CLK_USB_OHCI2>;
875 resets = <&ccu RST_BUS_OHCI2>,
876 <&ccu RST_BUS_EHCI2>;
877 phys = <&usbphy 2>;
878 phy-names = "usb";
879 status = "disabled";
880 };
881
882 ohci2: usb@5310400 {
883 compatible = "allwinner,sun50i-h616-ohci",
884 "generic-ohci";
885 reg = <0x05310400 0x100>;
886 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
887 clocks = <&ccu CLK_BUS_OHCI2>,
888 <&ccu CLK_USB_OHCI2>;
889 resets = <&ccu RST_BUS_OHCI2>;
890 phys = <&usbphy 2>;
891 phy-names = "usb";
892 status = "disabled";
893 };
894
895 ehci3: usb@5311000 {
896 compatible = "allwinner,sun50i-h616-ehci",
897 "generic-ehci";
898 reg = <0x05311000 0x100>;
899 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
900 clocks = <&ccu CLK_BUS_OHCI3>,
901 <&ccu CLK_BUS_EHCI3>,
902 <&ccu CLK_USB_OHCI3>;
903 resets = <&ccu RST_BUS_OHCI3>,
904 <&ccu RST_BUS_EHCI3>;
905 phys = <&usbphy 3>;
906 phy-names = "usb";
907 status = "disabled";
908 };
909
910 ohci3: usb@5311400 {
911 compatible = "allwinner,sun50i-h616-ohci",
912 "generic-ohci";
913 reg = <0x05311400 0x100>;
914 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
915 clocks = <&ccu CLK_BUS_OHCI3>,
916 <&ccu CLK_USB_OHCI3>;
917 resets = <&ccu RST_BUS_OHCI3>;
918 phys = <&usbphy 3>;
919 phy-names = "usb";
920 status = "disabled";
921 };
922
923 rtc: rtc@7000000 {
924 compatible = "allwinner,sun50i-h616-rtc";
925 reg = <0x07000000 0x400>;
926 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
927 clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
928 <&ccu CLK_PLL_SYSTEM_32K>;
929 clock-names = "bus", "hosc",
930 "pll-32k";
931 #clock-cells = <1>;
932 };
933
934 r_ccu: clock@7010000 {
935 compatible = "allwinner,sun50i-h616-r-ccu";
936 reg = <0x07010000 0x210>;
937 clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
938 <&ccu CLK_PLL_PERIPH0>;
939 clock-names = "hosc", "losc", "iosc", "pll-periph";
940 #clock-cells = <1>;
941 #reset-cells = <1>;
942 };
943
944 prcm_ppu: power-controller@7010250 {
945 compatible = "allwinner,sun50i-h616-prcm-ppu";
946 reg = <0x07010250 0x10>;
947 #power-domain-cells = <1>;
948 };
949
950 nmi_intc: interrupt-controller@7010320 {
951 compatible = "allwinner,sun50i-h616-nmi",
952 "allwinner,sun9i-a80-nmi";
953 reg = <0x07010320 0xc>;
954 interrupt-controller;
955 #interrupt-cells = <2>;
956 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
957 };
958
959 r_pio: pinctrl@7022000 {
960 compatible = "allwinner,sun50i-h616-r-pinctrl";
961 reg = <0x07022000 0x400>;
962 clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
963 <&rtc CLK_OSC32K>;
964 clock-names = "apb", "hosc", "losc";
965 gpio-controller;
966 #gpio-cells = <3>;
967
968 /omit-if-no-ref/
969 r_i2c_pins: r-i2c-pins {
970 pins = "PL0", "PL1";
971 function = "s_i2c";
972 };
973
974 r_rsb_pins: r-rsb-pins {
975 pins = "PL0", "PL1";
976 function = "s_rsb";
977 };
978 };
979
980 ir: ir@7040000 {
981 compatible = "allwinner,sun50i-h616-ir",
982 "allwinner,sun6i-a31-ir";
983 reg = <0x07040000 0x400>;
984 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
985 clocks = <&r_ccu CLK_R_APB1_IR>,
986 <&r_ccu CLK_IR>;
987 clock-names = "apb", "ir";
988 resets = <&r_ccu RST_R_APB1_IR>;
989 pinctrl-names = "default";
990 pinctrl-0 = <&ir_rx_pin>;
991 status = "disabled";
992 };
993
994 r_i2c: i2c@7081400 {
995 compatible = "allwinner,sun50i-h616-i2c",
996 "allwinner,sun8i-v536-i2c",
997 "allwinner,sun6i-a31-i2c";
998 reg = <0x07081400 0x400>;
999 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1000 clocks = <&r_ccu CLK_R_APB2_I2C>;
1001 dmas = <&dma 48>, <&dma 48>;
1002 dma-names = "rx", "tx";
1003 resets = <&r_ccu RST_R_APB2_I2C>;
1004 pinctrl-names = "default";
1005 pinctrl-0 = <&r_i2c_pins>;
1006 status = "disabled";
1007 #address-cells = <1>;
1008 #size-cells = <0>;
1009 };
1010
1011 r_rsb: rsb@7083000 {
1012 compatible = "allwinner,sun50i-h616-rsb",
1013 "allwinner,sun8i-a23-rsb";
1014 reg = <0x07083000 0x400>;
1015 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
1016 clocks = <&r_ccu CLK_R_APB2_RSB>;
1017 clock-frequency = <3000000>;
1018 resets = <&r_ccu RST_R_APB2_RSB>;
1019 pinctrl-names = "default";
1020 pinctrl-0 = <&r_rsb_pins>;
1021 status = "disabled";
1022 #address-cells = <1>;
1023 #size-cells = <0>;
1024 };
1025 };
1026
1027 thermal-zones {
1028 cpu-thermal {
1029 polling-delay-passive = <500>;
1030 polling-delay = <1000>;
1031 thermal-sensors = <&ths 2>;
1032 sustainable-power = <1000>;
1033
1034 trips {
1035 cpu_threshold: cpu-trip-0 {
1036 temperature = <60000>;
1037 type = "passive";
1038 hysteresis = <0>;
1039 };
1040 cpu_target: cpu-trip-1 {
1041 temperature = <70000>;
1042 type = "passive";
1043 hysteresis = <0>;
1044 };
1045 cpu_critical: cpu-trip-2 {
1046 temperature = <110000>;
1047 type = "critical";
1048 hysteresis = <0>;
1049 };
1050 };
1051 };
1052
1053 gpu-thermal {
1054 polling-delay-passive = <500>;
1055 polling-delay = <1000>;
1056 thermal-sensors = <&ths 0>;
1057 sustainable-power = <1100>;
1058
1059 trips {
1060 gpu_temp_critical: gpu-trip-0 {
1061 temperature = <110000>;
1062 type = "critical";
1063 hysteresis = <0>;
1064 };
1065 };
1066 };
1067
1068 ve-thermal {
1069 polling-delay-passive = <0>;
1070 polling-delay = <0>;
1071 thermal-sensors = <&ths 1>;
1072
1073 trips {
1074 ve_temp_critical: ve-trip-0 {
1075 temperature = <110000>;
1076 type = "critical";
1077 hysteresis = <0>;
1078 };
1079 };
1080 };
1081
1082 ddr-thermal {
1083 polling-delay-passive = <0>;
1084 polling-delay = <0>;
1085 thermal-sensors = <&ths 3>;
1086
1087 trips {
1088 ddr_temp_critical: ddr-trip-0 {
1089 temperature = <110000>;
1090 type = "critical";
1091 hysteresis = <0>;
1092 };
1093 };
1094 };
1095 };
1096 };