Debian Codegraph @

scripts/dtc/include-prefixes/arm64/allwinner/sun50i-h6.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (C) 2017 Icenowy Zheng <[email protected]>
3
4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/clock/sun50i-h6-ccu.h>
6 #include <dt-bindings/clock/sun50i-h6-r-ccu.h>
7 #include <dt-bindings/clock/sun6i-rtc.h>
8 #include <dt-bindings/clock/sun8i-de2.h>
9 #include <dt-bindings/clock/sun8i-tcon-top.h>
10 #include <dt-bindings/reset/sun50i-h6-ccu.h>
11 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
12 #include <dt-bindings/reset/sun8i-de2.h>
13 #include <dt-bindings/thermal/thermal.h>
14
15 / {
16 interrupt-parent = <&gic>;
17 #address-cells = <1>;
18 #size-cells = <1>;
19
20 cpus {
21 #address-cells = <1>;
22 #size-cells = <0>;
23
24 cpu0: cpu@0 {
25 compatible = "arm,cortex-a53";
26 device_type = "cpu";
27 reg = <0>;
28 enable-method = "psci";
29 clocks = <&ccu CLK_CPUX>;
30 #cooling-cells = <2>;
31 i-cache-size = <0x8000>;
32 i-cache-line-size = <64>;
33 i-cache-sets = <256>;
34 d-cache-size = <0x8000>;
35 d-cache-line-size = <64>;
36 d-cache-sets = <128>;
37 next-level-cache = <&l2_cache>;
38 };
39
40 cpu1: cpu@1 {
41 compatible = "arm,cortex-a53";
42 device_type = "cpu";
43 reg = <1>;
44 enable-method = "psci";
45 clocks = <&ccu CLK_CPUX>;
46 #cooling-cells = <2>;
47 i-cache-size = <0x8000>;
48 i-cache-line-size = <64>;
49 i-cache-sets = <256>;
50 d-cache-size = <0x8000>;
51 d-cache-line-size = <64>;
52 d-cache-sets = <128>;
53 next-level-cache = <&l2_cache>;
54 };
55
56 cpu2: cpu@2 {
57 compatible = "arm,cortex-a53";
58 device_type = "cpu";
59 reg = <2>;
60 enable-method = "psci";
61 clocks = <&ccu CLK_CPUX>;
62 #cooling-cells = <2>;
63 i-cache-size = <0x8000>;
64 i-cache-line-size = <64>;
65 i-cache-sets = <256>;
66 d-cache-size = <0x8000>;
67 d-cache-line-size = <64>;
68 d-cache-sets = <128>;
69 next-level-cache = <&l2_cache>;
70 };
71
72 cpu3: cpu@3 {
73 compatible = "arm,cortex-a53";
74 device_type = "cpu";
75 reg = <3>;
76 enable-method = "psci";
77 clocks = <&ccu CLK_CPUX>;
78 #cooling-cells = <2>;
79 i-cache-size = <0x8000>;
80 i-cache-line-size = <64>;
81 i-cache-sets = <256>;
82 d-cache-size = <0x8000>;
83 d-cache-line-size = <64>;
84 d-cache-sets = <128>;
85 next-level-cache = <&l2_cache>;
86 };
87
88 l2_cache: l2-cache {
89 compatible = "cache";
90 cache-level = <2>;
91 cache-unified;
92 cache-size = <0x80000>;
93 cache-line-size = <64>;
94 cache-sets = <512>;
95 };
96 };
97
98 de: display-engine {
99 compatible = "allwinner,sun50i-h6-display-engine";
100 allwinner,pipelines = <&mixer0>;
101 status = "disabled";
102 };
103
104 osc24M: osc24M-clk {
105 #clock-cells = <0>;
106 compatible = "fixed-clock";
107 clock-frequency = <24000000>;
108 clock-output-names = "osc24M";
109 };
110
111 pmu {
112 compatible = "arm,cortex-a53-pmu";
113 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
114 <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
115 <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
116 <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
117 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
118 };
119
120 psci {
121 compatible = "arm,psci-0.2";
122 method = "smc";
123 };
124
125 timer {
126 compatible = "arm,armv8-timer";
127 arm,no-tick-in-suspend;
128 interrupts = <GIC_PPI 13
129 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
130 <GIC_PPI 14
131 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
132 <GIC_PPI 11
133 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
134 <GIC_PPI 10
135 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
136 };
137
138 soc {
139 compatible = "simple-bus";
140 #address-cells = <1>;
141 #size-cells = <1>;
142 ranges;
143
144 bus@1000000 {
145 compatible = "allwinner,sun50i-h6-de3",
146 "allwinner,sun50i-a64-de2";
147 reg = <0x1000000 0x400000>;
148 allwinner,sram = <&de2_sram 1>;
149 #address-cells = <1>;
150 #size-cells = <1>;
151 ranges = <0 0x1000000 0x400000>;
152
153 display_clocks: clock@0 {
154 compatible = "allwinner,sun50i-h6-de3-clk";
155 reg = <0x0 0x10000>;
156 clocks = <&ccu CLK_BUS_DE>,
157 <&ccu CLK_DE>;
158 clock-names = "bus",
159 "mod";
160 resets = <&ccu RST_BUS_DE>;
161 #clock-cells = <1>;
162 #reset-cells = <1>;
163 };
164
165 mixer0: mixer@100000 {
166 compatible = "allwinner,sun50i-h6-de3-mixer-0";
167 reg = <0x100000 0x100000>;
168 clocks = <&display_clocks CLK_BUS_MIXER0>,
169 <&display_clocks CLK_MIXER0>;
170 clock-names = "bus",
171 "mod";
172 resets = <&display_clocks RST_MIXER0>;
173 iommus = <&iommu 0>;
174
175 ports {
176 #address-cells = <1>;
177 #size-cells = <0>;
178
179 mixer0_out: port@1 {
180 reg = <1>;
181
182 mixer0_out_tcon_top_mixer0: endpoint {
183 remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
184 };
185 };
186 };
187 };
188 };
189
190 video-codec-g2@1c00000 {
191 compatible = "allwinner,sun50i-h6-vpu-g2";
192 reg = <0x01c00000 0x1000>;
193 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
194 clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
195 clock-names = "bus", "mod";
196 resets = <&ccu RST_BUS_VP9>;
197 iommus = <&iommu 5>;
198 };
199
200 video-codec@1c0e000 {
201 compatible = "allwinner,sun50i-h6-video-engine";
202 reg = <0x01c0e000 0x2000>;
203 clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
204 <&ccu CLK_MBUS_VE>;
205 clock-names = "ahb", "mod", "ram";
206 resets = <&ccu RST_BUS_VE>;
207 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
208 allwinner,sram = <&ve_sram 1>;
209 iommus = <&iommu 3>;
210 };
211
212 gpu: gpu@1800000 {
213 compatible = "allwinner,sun50i-h6-mali",
214 "arm,mali-t720";
215 reg = <0x01800000 0x4000>;
216 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
217 <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
218 <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
219 interrupt-names = "job", "mmu", "gpu";
220 clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
221 clock-names = "core", "bus";
222 resets = <&ccu RST_BUS_GPU>;
223 #cooling-cells = <2>;
224 status = "disabled";
225 };
226
227 crypto: crypto@1904000 {
228 compatible = "allwinner,sun50i-h6-crypto";
229 reg = <0x01904000 0x1000>;
230 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
231 clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
232 clock-names = "bus", "mod", "ram";
233 resets = <&ccu RST_BUS_CE>;
234 };
235
236 syscon: syscon@3000000 {
237 compatible = "allwinner,sun50i-h6-system-control",
238 "allwinner,sun50i-a64-system-control";
239 reg = <0x03000000 0x1000>;
240 #address-cells = <1>;
241 #size-cells = <1>;
242 ranges;
243
244 sram_c: sram@28000 {
245 compatible = "mmio-sram";
246 reg = <0x00028000 0x1e000>;
247 #address-cells = <1>;
248 #size-cells = <1>;
249 ranges = <0 0x00028000 0x1e000>;
250
251 de2_sram: sram-section@0 {
252 compatible = "allwinner,sun50i-h6-sram-c",
253 "allwinner,sun50i-a64-sram-c";
254 reg = <0x0000 0x1e000>;
255 };
256 };
257
258 sram_c1: sram@1a00000 {
259 compatible = "mmio-sram";
260 reg = <0x01a00000 0x200000>;
261 #address-cells = <1>;
262 #size-cells = <1>;
263 ranges = <0 0x01a00000 0x200000>;
264
265 ve_sram: sram-section@0 {
266 compatible = "allwinner,sun50i-h6-sram-c1",
267 "allwinner,sun4i-a10-sram-c1";
268 reg = <0x000000 0x200000>;
269 };
270 };
271 };
272
273 ccu: clock@3001000 {
274 compatible = "allwinner,sun50i-h6-ccu";
275 reg = <0x03001000 0x1000>;
276 clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
277 clock-names = "hosc", "losc", "iosc";
278 #clock-cells = <1>;
279 #reset-cells = <1>;
280 };
281
282 dma: dma-controller@3002000 {
283 compatible = "allwinner,sun50i-h6-dma";
284 reg = <0x03002000 0x1000>;
285 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
286 clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
287 clock-names = "bus", "mbus";
288 dma-channels = <16>;
289 dma-requests = <46>;
290 resets = <&ccu RST_BUS_DMA>;
291 #dma-cells = <1>;
292 };
293
294 msgbox: mailbox@3003000 {
295 compatible = "allwinner,sun50i-h6-msgbox",
296 "allwinner,sun6i-a31-msgbox";
297 reg = <0x03003000 0x1000>;
298 clocks = <&ccu CLK_BUS_MSGBOX>;
299 resets = <&ccu RST_BUS_MSGBOX>;
300 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
301 #mbox-cells = <1>;
302 };
303
304 sid: efuse@3006000 {
305 compatible = "allwinner,sun50i-h6-sid";
306 reg = <0x03006000 0x400>;
307 #address-cells = <1>;
308 #size-cells = <1>;
309
310 ths_calibration: thermal-sensor-calibration@14 {
311 reg = <0x14 0x8>;
312 };
313
314 cpu_speed_grade: cpu-speed-grade@1c {
315 reg = <0x1c 0x4>;
316 };
317 };
318
319 timer@3009000 {
320 compatible = "allwinner,sun50i-h6-timer",
321 "allwinner,sun8i-a23-timer";
322 reg = <0x03009000 0xa0>;
323 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
324 <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
325 clocks = <&osc24M>;
326 };
327
328 watchdog: watchdog@30090a0 {
329 compatible = "allwinner,sun50i-h6-wdt",
330 "allwinner,sun6i-a31-wdt";
331 reg = <0x030090a0 0x20>;
332 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
333 clocks = <&osc24M>;
334 /* Broken on some H6 boards */
335 status = "disabled";
336 };
337
338 pwm: pwm@300a000 {
339 compatible = "allwinner,sun50i-h6-pwm";
340 reg = <0x0300a000 0x400>;
341 clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
342 clock-names = "mod", "bus";
343 resets = <&ccu RST_BUS_PWM>;
344 #pwm-cells = <3>;
345 status = "disabled";
346 };
347
348 pio: pinctrl@300b000 {
349 compatible = "allwinner,sun50i-h6-pinctrl";
350 reg = <0x0300b000 0x400>;
351 interrupt-parent = <&r_intc>;
352 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
353 <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
354 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
355 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
356 clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
357 clock-names = "apb", "hosc", "losc";
358 gpio-controller;
359 #gpio-cells = <3>;
360 interrupt-controller;
361 #interrupt-cells = <3>;
362
363 ext_rgmii_pins: rgmii-pins {
364 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
365 "PD5", "PD7", "PD8", "PD9", "PD10",
366 "PD11", "PD12", "PD13", "PD19", "PD20";
367 function = "emac";
368 drive-strength = <40>;
369 };
370
371 hdmi_pins: hdmi-pins {
372 pins = "PH8", "PH9", "PH10";
373 function = "hdmi";
374 };
375
376 i2c0_pins: i2c0-pins {
377 pins = "PD25", "PD26";
378 function = "i2c0";
379 };
380
381 i2c1_pins: i2c1-pins {
382 pins = "PH5", "PH6";
383 function = "i2c1";
384 };
385
386 i2c2_pins: i2c2-pins {
387 pins = "PD23", "PD24";
388 function = "i2c2";
389 };
390
391 mmc0_pins: mmc0-pins {
392 pins = "PF0", "PF1", "PF2", "PF3",
393 "PF4", "PF5";
394 function = "mmc0";
395 drive-strength = <30>;
396 bias-pull-up;
397 };
398
399 /omit-if-no-ref/
400 mmc1_pins: mmc1-pins {
401 pins = "PG0", "PG1", "PG2", "PG3",
402 "PG4", "PG5";
403 function = "mmc1";
404 drive-strength = <30>;
405 bias-pull-up;
406 };
407
408 mmc2_pins: mmc2-pins {
409 pins = "PC1", "PC4", "PC5", "PC6",
410 "PC7", "PC8", "PC9", "PC10",
411 "PC11", "PC12", "PC13", "PC14";
412 function = "mmc2";
413 drive-strength = <30>;
414 bias-pull-up;
415 };
416
417 /omit-if-no-ref/
418 spi0_pins: spi0-pins {
419 pins = "PC0", "PC2", "PC3";
420 function = "spi0";
421 };
422
423 /* pin shared with MMC2-CMD (eMMC) */
424 /omit-if-no-ref/
425 spi0_cs_pin: spi0-cs-pin {
426 pins = "PC5";
427 function = "spi0";
428 };
429
430 /omit-if-no-ref/
431 spi1_pins: spi1-pins {
432 pins = "PH4", "PH5", "PH6";
433 function = "spi1";
434 };
435
436 /omit-if-no-ref/
437 spi1_cs_pin: spi1-cs-pin {
438 pins = "PH3";
439 function = "spi1";
440 };
441
442 /omit-if-no-ref/
443 spdif_tx_pin: spdif-tx-pin {
444 pins = "PH7";
445 function = "spdif";
446 };
447
448 uart0_ph_pins: uart0-ph-pins {
449 pins = "PH0", "PH1";
450 function = "uart0";
451 };
452
453 uart1_pins: uart1-pins {
454 pins = "PG6", "PG7";
455 function = "uart1";
456 };
457
458 uart1_rts_cts_pins: uart1-rts-cts-pins {
459 pins = "PG8", "PG9";
460 function = "uart1";
461 };
462 };
463
464 gic: interrupt-controller@3021000 {
465 compatible = "arm,gic-400";
466 reg = <0x03021000 0x1000>,
467 <0x03022000 0x2000>,
468 <0x03024000 0x2000>,
469 <0x03026000 0x2000>;
470 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
471 interrupt-controller;
472 #interrupt-cells = <3>;
473 };
474
475 iommu: iommu@30f0000 {
476 compatible = "allwinner,sun50i-h6-iommu";
477 reg = <0x030f0000 0x10000>;
478 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
479 clocks = <&ccu CLK_BUS_IOMMU>;
480 resets = <&ccu RST_BUS_IOMMU>;
481 #iommu-cells = <1>;
482 };
483
484 mmc0: mmc@4020000 {
485 compatible = "allwinner,sun50i-h6-mmc",
486 "allwinner,sun50i-a64-mmc";
487 reg = <0x04020000 0x1000>;
488 clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
489 clock-names = "ahb", "mmc";
490 resets = <&ccu RST_BUS_MMC0>;
491 reset-names = "ahb";
492 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
493 pinctrl-names = "default";
494 pinctrl-0 = <&mmc0_pins>;
495 max-frequency = <150000000>;
496 status = "disabled";
497 #address-cells = <1>;
498 #size-cells = <0>;
499 };
500
501 mmc1: mmc@4021000 {
502 compatible = "allwinner,sun50i-h6-mmc",
503 "allwinner,sun50i-a64-mmc";
504 reg = <0x04021000 0x1000>;
505 clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
506 clock-names = "ahb", "mmc";
507 resets = <&ccu RST_BUS_MMC1>;
508 reset-names = "ahb";
509 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
510 pinctrl-names = "default";
511 pinctrl-0 = <&mmc1_pins>;
512 max-frequency = <150000000>;
513 status = "disabled";
514 #address-cells = <1>;
515 #size-cells = <0>;
516 };
517
518 mmc2: mmc@4022000 {
519 compatible = "allwinner,sun50i-h6-emmc",
520 "allwinner,sun50i-a64-emmc";
521 reg = <0x04022000 0x1000>;
522 clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
523 clock-names = "ahb", "mmc";
524 resets = <&ccu RST_BUS_MMC2>;
525 reset-names = "ahb";
526 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
527 pinctrl-names = "default";
528 pinctrl-0 = <&mmc2_pins>;
529 max-frequency = <150000000>;
530 status = "disabled";
531 #address-cells = <1>;
532 #size-cells = <0>;
533 };
534
535 uart0: serial@5000000 {
536 compatible = "snps,dw-apb-uart";
537 reg = <0x05000000 0x400>;
538 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
539 reg-shift = <2>;
540 reg-io-width = <4>;
541 clocks = <&ccu CLK_BUS_UART0>;
542 resets = <&ccu RST_BUS_UART0>;
543 status = "disabled";
544 };
545
546 uart1: serial@5000400 {
547 compatible = "snps,dw-apb-uart";
548 reg = <0x05000400 0x400>;
549 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
550 reg-shift = <2>;
551 reg-io-width = <4>;
552 clocks = <&ccu CLK_BUS_UART1>;
553 resets = <&ccu RST_BUS_UART1>;
554 status = "disabled";
555 };
556
557 uart2: serial@5000800 {
558 compatible = "snps,dw-apb-uart";
559 reg = <0x05000800 0x400>;
560 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
561 reg-shift = <2>;
562 reg-io-width = <4>;
563 clocks = <&ccu CLK_BUS_UART2>;
564 resets = <&ccu RST_BUS_UART2>;
565 status = "disabled";
566 };
567
568 uart3: serial@5000c00 {
569 compatible = "snps,dw-apb-uart";
570 reg = <0x05000c00 0x400>;
571 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
572 reg-shift = <2>;
573 reg-io-width = <4>;
574 clocks = <&ccu CLK_BUS_UART3>;
575 resets = <&ccu RST_BUS_UART3>;
576 status = "disabled";
577 };
578
579 i2c0: i2c@5002000 {
580 compatible = "allwinner,sun50i-h6-i2c",
581 "allwinner,sun6i-a31-i2c";
582 reg = <0x05002000 0x400>;
583 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
584 clocks = <&ccu CLK_BUS_I2C0>;
585 resets = <&ccu RST_BUS_I2C0>;
586 pinctrl-names = "default";
587 pinctrl-0 = <&i2c0_pins>;
588 status = "disabled";
589 #address-cells = <1>;
590 #size-cells = <0>;
591 };
592
593 i2c1: i2c@5002400 {
594 compatible = "allwinner,sun50i-h6-i2c",
595 "allwinner,sun6i-a31-i2c";
596 reg = <0x05002400 0x400>;
597 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
598 clocks = <&ccu CLK_BUS_I2C1>;
599 resets = <&ccu RST_BUS_I2C1>;
600 pinctrl-names = "default";
601 pinctrl-0 = <&i2c1_pins>;
602 status = "disabled";
603 #address-cells = <1>;
604 #size-cells = <0>;
605 };
606
607 i2c2: i2c@5002800 {
608 compatible = "allwinner,sun50i-h6-i2c",
609 "allwinner,sun6i-a31-i2c";
610 reg = <0x05002800 0x400>;
611 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
612 clocks = <&ccu CLK_BUS_I2C2>;
613 resets = <&ccu RST_BUS_I2C2>;
614 pinctrl-names = "default";
615 pinctrl-0 = <&i2c2_pins>;
616 status = "disabled";
617 #address-cells = <1>;
618 #size-cells = <0>;
619 };
620
621 spi0: spi@5010000 {
622 compatible = "allwinner,sun50i-h6-spi",
623 "allwinner,sun8i-h3-spi";
624 reg = <0x05010000 0x1000>;
625 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
626 clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
627 clock-names = "ahb", "mod";
628 dmas = <&dma 22>, <&dma 22>;
629 dma-names = "rx", "tx";
630 resets = <&ccu RST_BUS_SPI0>;
631 status = "disabled";
632 #address-cells = <1>;
633 #size-cells = <0>;
634 };
635
636 spi1: spi@5011000 {
637 compatible = "allwinner,sun50i-h6-spi",
638 "allwinner,sun8i-h3-spi";
639 reg = <0x05011000 0x1000>;
640 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
641 clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
642 clock-names = "ahb", "mod";
643 dmas = <&dma 23>, <&dma 23>;
644 dma-names = "rx", "tx";
645 resets = <&ccu RST_BUS_SPI1>;
646 status = "disabled";
647 #address-cells = <1>;
648 #size-cells = <0>;
649 };
650
651 emac: ethernet@5020000 {
652 compatible = "allwinner,sun50i-h6-emac",
653 "allwinner,sun50i-a64-emac";
654 syscon = <&syscon>;
655 reg = <0x05020000 0x10000>;
656 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
657 interrupt-names = "macirq";
658 resets = <&ccu RST_BUS_EMAC>;
659 reset-names = "stmmaceth";
660 clocks = <&ccu CLK_BUS_EMAC>;
661 clock-names = "stmmaceth";
662 status = "disabled";
663
664 mdio: mdio {
665 compatible = "snps,dwmac-mdio";
666 #address-cells = <1>;
667 #size-cells = <0>;
668 };
669 };
670
671 i2s1: i2s@5091000 {
672 #sound-dai-cells = <0>;
673 compatible = "allwinner,sun50i-h6-i2s";
674 reg = <0x05091000 0x1000>;
675 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
676 clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
677 clock-names = "apb", "mod";
678 dmas = <&dma 4>, <&dma 4>;
679 resets = <&ccu RST_BUS_I2S1>;
680 dma-names = "rx", "tx";
681 status = "disabled";
682 };
683
684 spdif: spdif@5093000 {
685 #sound-dai-cells = <0>;
686 compatible = "allwinner,sun50i-h6-spdif";
687 reg = <0x05093000 0x400>;
688 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
689 clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
690 clock-names = "apb", "spdif";
691 resets = <&ccu RST_BUS_SPDIF>;
692 dmas = <&dma 2>, <&dma 2>;
693 dma-names = "rx", "tx";
694 status = "disabled";
695 };
696
697 usb2otg: usb@5100000 {
698 compatible = "allwinner,sun50i-h6-musb",
699 "allwinner,sun8i-a33-musb";
700 reg = <0x05100000 0x0400>;
701 clocks = <&ccu CLK_BUS_OTG>;
702 resets = <&ccu RST_BUS_OTG>;
703 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
704 interrupt-names = "mc";
705 phys = <&usb2phy 0>;
706 phy-names = "usb";
707 extcon = <&usb2phy 0>;
708 status = "disabled";
709 };
710
711 usb2phy: phy@5100400 {
712 compatible = "allwinner,sun50i-h6-usb-phy";
713 reg = <0x05100400 0x24>,
714 <0x05101800 0x4>,
715 <0x05311800 0x4>;
716 reg-names = "phy_ctrl",
717 "pmu0",
718 "pmu3";
719 clocks = <&ccu CLK_USB_PHY0>,
720 <&ccu CLK_USB_PHY3>;
721 clock-names = "usb0_phy",
722 "usb3_phy";
723 resets = <&ccu RST_USB_PHY0>,
724 <&ccu RST_USB_PHY3>;
725 reset-names = "usb0_reset",
726 "usb3_reset";
727 status = "disabled";
728 #phy-cells = <1>;
729 };
730
731 ehci0: usb@5101000 {
732 compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
733 reg = <0x05101000 0x100>;
734 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
735 clocks = <&ccu CLK_BUS_OHCI0>,
736 <&ccu CLK_BUS_EHCI0>,
737 <&ccu CLK_USB_OHCI0>;
738 resets = <&ccu RST_BUS_OHCI0>,
739 <&ccu RST_BUS_EHCI0>;
740 phys = <&usb2phy 0>;
741 phy-names = "usb";
742 status = "disabled";
743 };
744
745 ohci0: usb@5101400 {
746 compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
747 reg = <0x05101400 0x100>;
748 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
749 clocks = <&ccu CLK_BUS_OHCI0>,
750 <&ccu CLK_USB_OHCI0>;
751 resets = <&ccu RST_BUS_OHCI0>;
752 phys = <&usb2phy 0>;
753 phy-names = "usb";
754 status = "disabled";
755 };
756
757 dwc3: usb@5200000 {
758 compatible = "snps,dwc3";
759 reg = <0x05200000 0x10000>;
760 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
761 clocks = <&ccu CLK_BUS_XHCI>,
762 <&ccu CLK_BUS_XHCI>,
763 <&rtc CLK_OSC32K>;
764 clock-names = "ref", "bus_early", "suspend";
765 resets = <&ccu RST_BUS_XHCI>;
766 /*
767 * The datasheet of the chip doesn't declare the
768 * peripheral function, and there's no boards known
769 * to have a USB Type-B port routed to the port.
770 * In addition, no one has tested the peripheral
771 * function yet.
772 * So set the dr_mode to "host" in the DTSI file.
773 */
774 dr_mode = "host";
775 phys = <&usb3phy>;
776 phy-names = "usb3-phy";
777 status = "disabled";
778 };
779
780 usb3phy: phy@5210000 {
781 compatible = "allwinner,sun50i-h6-usb3-phy";
782 reg = <0x5210000 0x10000>;
783 clocks = <&ccu CLK_USB_PHY1>;
784 resets = <&ccu RST_USB_PHY1>;
785 #phy-cells = <0>;
786 status = "disabled";
787 };
788
789 ehci3: usb@5311000 {
790 compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
791 reg = <0x05311000 0x100>;
792 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
793 clocks = <&ccu CLK_BUS_OHCI3>,
794 <&ccu CLK_BUS_EHCI3>,
795 <&ccu CLK_USB_OHCI3>;
796 resets = <&ccu RST_BUS_OHCI3>,
797 <&ccu RST_BUS_EHCI3>;
798 phys = <&usb2phy 3>;
799 phy-names = "usb";
800 status = "disabled";
801 };
802
803 ohci3: usb@5311400 {
804 compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
805 reg = <0x05311400 0x100>;
806 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
807 clocks = <&ccu CLK_BUS_OHCI3>,
808 <&ccu CLK_USB_OHCI3>;
809 resets = <&ccu RST_BUS_OHCI3>;
810 phys = <&usb2phy 3>;
811 phy-names = "usb";
812 status = "disabled";
813 };
814
815 hdmi: hdmi@6000000 {
816 compatible = "allwinner,sun50i-h6-dw-hdmi";
817 reg = <0x06000000 0x10000>;
818 reg-io-width = <1>;
819 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
820 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
821 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
822 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
823 clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
824 "hdcp-bus";
825 resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
826 reset-names = "ctrl", "hdcp";
827 phys = <&hdmi_phy>;
828 phy-names = "phy";
829 pinctrl-names = "default";
830 pinctrl-0 = <&hdmi_pins>;
831 status = "disabled";
832
833 ports {
834 #address-cells = <1>;
835 #size-cells = <0>;
836
837 hdmi_in: port@0 {
838 reg = <0>;
839
840 hdmi_in_tcon_top: endpoint {
841 remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
842 };
843 };
844
845 hdmi_out: port@1 {
846 reg = <1>;
847 };
848 };
849 };
850
851 hdmi_phy: hdmi-phy@6010000 {
852 compatible = "allwinner,sun50i-h6-hdmi-phy";
853 reg = <0x06010000 0x10000>;
854 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
855 clock-names = "bus", "mod";
856 resets = <&ccu RST_BUS_HDMI>;
857 reset-names = "phy";
858 #phy-cells = <0>;
859 };
860
861 tcon_top: tcon-top@6510000 {
862 compatible = "allwinner,sun50i-h6-tcon-top";
863 reg = <0x06510000 0x1000>;
864 clocks = <&ccu CLK_BUS_TCON_TOP>,
865 <&ccu CLK_TCON_TV0>;
866 clock-names = "bus",
867 "tcon-tv0";
868 clock-output-names = "tcon-top-tv0";
869 resets = <&ccu RST_BUS_TCON_TOP>;
870 #clock-cells = <1>;
871
872 ports {
873 #address-cells = <1>;
874 #size-cells = <0>;
875
876 tcon_top_mixer0_in: port@0 {
877 #address-cells = <1>;
878 #size-cells = <0>;
879 reg = <0>;
880
881 tcon_top_mixer0_in_mixer0: endpoint@0 {
882 reg = <0>;
883 remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
884 };
885 };
886
887 tcon_top_mixer0_out: port@1 {
888 #address-cells = <1>;
889 #size-cells = <0>;
890 reg = <1>;
891
892 tcon_top_mixer0_out_tcon_tv: endpoint@2 {
893 reg = <2>;
894 remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
895 };
896 };
897
898 tcon_top_hdmi_in: port@4 {
899 #address-cells = <1>;
900 #size-cells = <0>;
901 reg = <4>;
902
903 tcon_top_hdmi_in_tcon_tv: endpoint@0 {
904 reg = <0>;
905 remote-endpoint = <&tcon_tv_out_tcon_top>;
906 };
907 };
908
909 tcon_top_hdmi_out: port@5 {
910 reg = <5>;
911
912 tcon_top_hdmi_out_hdmi: endpoint {
913 remote-endpoint = <&hdmi_in_tcon_top>;
914 };
915 };
916 };
917 };
918
919 tcon_tv: lcd-controller@6515000 {
920 compatible = "allwinner,sun50i-h6-tcon-tv",
921 "allwinner,sun8i-r40-tcon-tv";
922 reg = <0x06515000 0x1000>;
923 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
924 clocks = <&ccu CLK_BUS_TCON_TV0>,
925 <&tcon_top CLK_TCON_TOP_TV0>;
926 clock-names = "ahb",
927 "tcon-ch1";
928 resets = <&ccu RST_BUS_TCON_TV0>;
929 reset-names = "lcd";
930
931 ports {
932 #address-cells = <1>;
933 #size-cells = <0>;
934
935 tcon_tv_in: port@0 {
936 reg = <0>;
937
938 tcon_tv_in_tcon_top_mixer0: endpoint {
939 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
940 };
941 };
942
943 tcon_tv_out: port@1 {
944 #address-cells = <1>;
945 #size-cells = <0>;
946 reg = <1>;
947
948 tcon_tv_out_tcon_top: endpoint@1 {
949 reg = <1>;
950 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
951 };
952 };
953 };
954 };
955
956 rtc: rtc@7000000 {
957 compatible = "allwinner,sun50i-h6-rtc";
958 reg = <0x07000000 0x400>;
959 interrupt-parent = <&r_intc>;
960 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
961 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
962 clock-output-names = "osc32k", "osc32k-out", "iosc";
963 #clock-cells = <1>;
964 };
965
966 r_ccu: clock@7010000 {
967 compatible = "allwinner,sun50i-h6-r-ccu";
968 reg = <0x07010000 0x400>;
969 clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
970 <&ccu CLK_PLL_PERIPH0>;
971 clock-names = "hosc", "losc", "iosc", "pll-periph";
972 #clock-cells = <1>;
973 #reset-cells = <1>;
974 };
975
976 r_watchdog: watchdog@7020400 {
977 compatible = "allwinner,sun50i-h6-wdt",
978 "allwinner,sun6i-a31-wdt";
979 reg = <0x07020400 0x20>;
980 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
981 clocks = <&osc24M>;
982 };
983
984 r_intc: interrupt-controller@7021000 {
985 compatible = "allwinner,sun50i-h6-r-intc";
986 interrupt-controller;
987 #interrupt-cells = <3>;
988 reg = <0x07021000 0x400>;
989 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
990 };
991
992 r_pio: pinctrl@7022000 {
993 compatible = "allwinner,sun50i-h6-r-pinctrl";
994 reg = <0x07022000 0x400>;
995 interrupt-parent = <&r_intc>;
996 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
997 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
998 clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
999 <&rtc CLK_OSC32K>;
1000 clock-names = "apb", "hosc", "losc";
1001 gpio-controller;
1002 #gpio-cells = <3>;
1003 interrupt-controller;
1004 #interrupt-cells = <3>;
1005
1006 r_i2c_pins: r-i2c-pins {
1007 pins = "PL0", "PL1";
1008 function = "s_i2c";
1009 };
1010
1011 r_ir_rx_pin: r-ir-rx-pin {
1012 pins = "PL9";
1013 function = "s_cir_rx";
1014 };
1015
1016 r_rsb_pins: r-rsb-pins {
1017 pins = "PL0", "PL1";
1018 function = "s_rsb";
1019 };
1020 };
1021
1022 r_ir: ir@7040000 {
1023 compatible = "allwinner,sun50i-h6-ir",
1024 "allwinner,sun6i-a31-ir";
1025 reg = <0x07040000 0x400>;
1026 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
1027 clocks = <&r_ccu CLK_R_APB1_IR>,
1028 <&r_ccu CLK_IR>;
1029 clock-names = "apb", "ir";
1030 resets = <&r_ccu RST_R_APB1_IR>;
1031 pinctrl-names = "default";
1032 pinctrl-0 = <&r_ir_rx_pin>;
1033 status = "disabled";
1034 };
1035
1036 r_i2c: i2c@7081400 {
1037 compatible = "allwinner,sun50i-h6-i2c",
1038 "allwinner,sun6i-a31-i2c";
1039 reg = <0x07081400 0x400>;
1040 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1041 clocks = <&r_ccu CLK_R_APB2_I2C>;
1042 resets = <&r_ccu RST_R_APB2_I2C>;
1043 pinctrl-names = "default";
1044 pinctrl-0 = <&r_i2c_pins>;
1045 status = "disabled";
1046 #address-cells = <1>;
1047 #size-cells = <0>;
1048 };
1049
1050 r_rsb: rsb@7083000 {
1051 compatible = "allwinner,sun8i-a23-rsb";
1052 reg = <0x07083000 0x400>;
1053 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1054 clocks = <&r_ccu CLK_R_APB2_RSB>;
1055 clock-frequency = <3000000>;
1056 resets = <&r_ccu RST_R_APB2_RSB>;
1057 pinctrl-names = "default";
1058 pinctrl-0 = <&r_rsb_pins>;
1059 status = "disabled";
1060 #address-cells = <1>;
1061 #size-cells = <0>;
1062 };
1063
1064 ths: thermal-sensor@5070400 {
1065 compatible = "allwinner,sun50i-h6-ths";
1066 reg = <0x05070400 0x100>;
1067 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1068 clocks = <&ccu CLK_BUS_THS>;
1069 clock-names = "bus";
1070 resets = <&ccu RST_BUS_THS>;
1071 nvmem-cells = <&ths_calibration>;
1072 nvmem-cell-names = "calibration";
1073 #thermal-sensor-cells = <1>;
1074 };
1075 };
1076
1077 thermal-zones {
1078 cpu-thermal {
1079 polling-delay-passive = <0>;
1080 polling-delay = <0>;
1081 thermal-sensors = <&ths 0>;
1082
1083 trips {
1084 cpu_alert: cpu-alert {
1085 temperature = <85000>;
1086 hysteresis = <2000>;
1087 type = "passive";
1088 };
1089
1090 cpu-crit {
1091 temperature = <100000>;
1092 hysteresis = <0>;
1093 type = "critical";
1094 };
1095 };
1096
1097 cooling-maps {
1098 map0 {
1099 trip = <&cpu_alert>;
1100 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1101 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1102 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1103 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1104 };
1105 };
1106 };
1107
1108 gpu-thermal {
1109 polling-delay-passive = <1000>;
1110 polling-delay = <2000>;
1111 thermal-sensors = <&ths 1>;
1112
1113 trips {
1114 gpu_alert0: gpu-alert-0 {
1115 temperature = <95000>;
1116 hysteresis = <2000>;
1117 type = "passive";
1118 };
1119
1120 gpu_alert1: gpu-alert-1 {
1121 temperature = <100000>;
1122 hysteresis = <2000>;
1123 type = "passive";
1124 };
1125
1126 gpu_alert2: gpu-alert-2 {
1127 temperature = <105000>;
1128 hysteresis = <2000>;
1129 type = "passive";
1130 };
1131
1132 gpu-crit {
1133 temperature = <115000>;
1134 hysteresis = <0>;
1135 type = "critical";
1136 };
1137 };
1138
1139 cooling-maps {
1140 // Forbid the GPU to go over 756MHz
1141 map0 {
1142 trip = <&gpu_alert0>;
1143 cooling-device = <&gpu 1 THERMAL_NO_LIMIT>;
1144 };
1145
1146 // Forbid the GPU to go over 624MHz
1147 map1 {
1148 trip = <&gpu_alert1>;
1149 cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
1150 };
1151
1152 // Forbid the GPU to go over 576MHz
1153 map2 {
1154 trip = <&gpu_alert2>;
1155 cooling-device = <&gpu 3 THERMAL_NO_LIMIT>;
1156 };
1157 };
1158 };
1159 };
1160 };