| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
// Copyright (c) 2019 Jernej Skrabec <[email protected]> |
| 3 |
|
| 4 |
/dts-v1/; |
| 5 |
|
| 6 |
#include "sun50i-h6.dtsi" |
| 7 |
#include "sun50i-h6-cpu-opp.dtsi" |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
aliases { |
| 13 |
serial0 = &uart0; |
| 14 |
}; |
| 15 |
|
| 16 |
chosen { |
| 17 |
stdout-path = "serial0:115200n8"; |
| 18 |
}; |
| 19 |
|
| 20 |
connector { |
| 21 |
compatible = "hdmi-connector"; |
| 22 |
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ |
| 23 |
type = "a"; |
| 24 |
|
| 25 |
port { |
| 26 |
hdmi_con_in: endpoint { |
| 27 |
remote-endpoint = <&hdmi_out_con>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
}; |
| 31 |
|
| 32 |
/* used for FD650 LED display driver */ |
| 33 |
i2c { |
| 34 |
compatible = "i2c-gpio"; |
| 35 |
sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */ |
| 36 |
scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */ |
| 37 |
i2c-gpio,delay-us = <5>; |
| 38 |
}; |
| 39 |
|
| 40 |
reg_vcc1v8: regulator-vcc1v8 { |
| 41 |
compatible = "regulator-fixed"; |
| 42 |
regulator-name = "vcc1v8"; |
| 43 |
regulator-min-microvolt = <1800000>; |
| 44 |
regulator-max-microvolt = <1800000>; |
| 45 |
}; |
| 46 |
|
| 47 |
reg_vcc3v3: regulator-vcc3v3 { |
| 48 |
compatible = "regulator-fixed"; |
| 49 |
regulator-name = "vcc3v3"; |
| 50 |
regulator-min-microvolt = <3300000>; |
| 51 |
regulator-max-microvolt = <3300000>; |
| 52 |
}; |
| 53 |
|
| 54 |
reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
regulator-name = "vdd-cpu-gpu"; |
| 57 |
regulator-min-microvolt = <1135000>; |
| 58 |
regulator-max-microvolt = <1135000>; |
| 59 |
}; |
| 60 |
|
| 61 |
sound-spdif { |
| 62 |
compatible = "simple-audio-card"; |
| 63 |
simple-audio-card,name = "sun50i-h6-spdif"; |
| 64 |
|
| 65 |
simple-audio-card,cpu { |
| 66 |
sound-dai = <&spdif>; |
| 67 |
}; |
| 68 |
|
| 69 |
simple-audio-card,codec { |
| 70 |
sound-dai = <&spdif_out>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
spdif_out: spdif-out { |
| 75 |
#sound-dai-cells = <0>; |
| 76 |
compatible = "linux,spdif-dit"; |
| 77 |
}; |
| 78 |
|
| 79 |
wifi_pwrseq: wifi-pwrseq { |
| 80 |
compatible = "mmc-pwrseq-simple"; |
| 81 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 82 |
clock-names = "ext_clock"; |
| 83 |
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
&cpu0 { |
| 88 |
cpu-supply = <®_vdd_cpu_gpu>; |
| 89 |
}; |
| 90 |
|
| 91 |
&de { |
| 92 |
status = "okay"; |
| 93 |
}; |
| 94 |
|
| 95 |
&dwc3 { |
| 96 |
status = "okay"; |
| 97 |
}; |
| 98 |
|
| 99 |
&ehci0 { |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&ehci3 { |
| 104 |
status = "okay"; |
| 105 |
}; |
| 106 |
|
| 107 |
&gpu { |
| 108 |
mali-supply = <®_vdd_cpu_gpu>; |
| 109 |
status = "okay"; |
| 110 |
}; |
| 111 |
|
| 112 |
&hdmi { |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&hdmi_out { |
| 117 |
hdmi_out_con: endpoint { |
| 118 |
remote-endpoint = <&hdmi_con_in>; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
&mmc0 { |
| 123 |
pinctrl-names = "default"; |
| 124 |
pinctrl-0 = <&mmc0_pins>; |
| 125 |
vmmc-supply = <®_vcc3v3>; |
| 126 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; |
| 127 |
disable-wp; |
| 128 |
bus-width = <4>; |
| 129 |
status = "okay"; |
| 130 |
}; |
| 131 |
|
| 132 |
&mmc1 { |
| 133 |
vmmc-supply = <®_vcc3v3>; |
| 134 |
vqmmc-supply = <®_vcc1v8>; |
| 135 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 136 |
bus-width = <4>; |
| 137 |
non-removable; |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&mmc2 { |
| 142 |
vmmc-supply = <®_vcc3v3>; |
| 143 |
vqmmc-supply = <®_vcc1v8>; |
| 144 |
bus-width = <8>; |
| 145 |
non-removable; |
| 146 |
cap-mmc-hw-reset; |
| 147 |
mmc-hs200-1_8v; |
| 148 |
status = "okay"; |
| 149 |
}; |
| 150 |
|
| 151 |
&ohci0 { |
| 152 |
status = "okay"; |
| 153 |
}; |
| 154 |
|
| 155 |
&ohci3 { |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
&pio { |
| 160 |
vcc-pc-supply = <®_vcc1v8>; |
| 161 |
vcc-pd-supply = <®_vcc3v3>; |
| 162 |
vcc-pg-supply = <®_vcc1v8>; |
| 163 |
}; |
| 164 |
|
| 165 |
&r_ir { |
| 166 |
status = "okay"; |
| 167 |
}; |
| 168 |
|
| 169 |
&spdif { |
| 170 |
pinctrl-names = "default"; |
| 171 |
pinctrl-0 = <&spdif_tx_pin>; |
| 172 |
status = "okay"; |
| 173 |
}; |
| 174 |
|
| 175 |
&uart0 { |
| 176 |
pinctrl-names = "default"; |
| 177 |
pinctrl-0 = <&uart0_ph_pins>; |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&usb2otg { |
| 182 |
dr_mode = "host"; |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&usb2phy { |
| 187 |
status = "okay"; |
| 188 |
}; |
| 189 |
|
| 190 |
&usb3phy { |
| 191 |
status = "okay"; |
| 192 |
}; |