Debian Codegraph @

scripts/dtc/include-prefixes/arm64/allwinner/sun50i-h6-orangepi-3.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (C) 2019 OndÅ™ej Jirman <[email protected]>
3
4 /dts-v1/;
5
6 #include "sun50i-h6.dtsi"
7 #include "sun50i-h6-cpu-opp.dtsi"
8
9 #include <dt-bindings/gpio/gpio.h>
10
11 / {
12 model = "OrangePi 3";
13 compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
14
15 aliases {
16 serial0 = &uart0;
17 serial1 = &uart1;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n8";
22 };
23
24 connector {
25 compatible = "hdmi-connector";
26 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
27 type = "a";
28
29 port {
30 hdmi_con_in: endpoint {
31 remote-endpoint = <&hdmi_out_con>;
32 };
33 };
34 };
35
36 ext_osc32k: ext-osc32k-clk {
37 #clock-cells = <0>;
38 compatible = "fixed-clock";
39 clock-frequency = <32768>;
40 clock-output-names = "ext_osc32k";
41 };
42
43 leds {
44 compatible = "gpio-leds";
45
46 led-0 {
47 label = "orangepi:red:power";
48 gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
49 default-state = "on";
50 };
51
52 led-1 {
53 label = "orangepi:green:status";
54 gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
55 };
56 };
57
58 reg_vcc5v: vcc5v {
59 /* board wide 5V supply directly from the DC jack */
60 compatible = "regulator-fixed";
61 regulator-name = "vcc-5v";
62 regulator-min-microvolt = <5000000>;
63 regulator-max-microvolt = <5000000>;
64 regulator-always-on;
65 };
66
67 reg_vcc33_wifi: vcc33-wifi {
68 /* Always on 3.3V regulator for WiFi and BT */
69 compatible = "regulator-fixed";
70 regulator-name = "vcc33-wifi";
71 regulator-min-microvolt = <3300000>;
72 regulator-max-microvolt = <3300000>;
73 regulator-always-on;
74 vin-supply = <&reg_vcc5v>;
75 };
76
77 reg_vcc_wifi_io: vcc-wifi-io {
78 /* Always on 1.8V/300mA regulator for WiFi and BT IO */
79 compatible = "regulator-fixed";
80 regulator-name = "vcc-wifi-io";
81 regulator-min-microvolt = <1800000>;
82 regulator-max-microvolt = <1800000>;
83 regulator-always-on;
84 vin-supply = <&reg_vcc33_wifi>;
85 };
86
87 wifi_pwrseq: wifi-pwrseq {
88 compatible = "mmc-pwrseq-simple";
89 clocks = <&rtc CLK_OSC32K_FANOUT>;
90 clock-names = "ext_clock";
91 reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
92 post-power-on-delay-ms = <200>;
93 };
94 };
95
96 &cpu0 {
97 cpu-supply = <&reg_dcdca>;
98 };
99
100 &de {
101 status = "okay";
102 };
103
104 &dwc3 {
105 status = "okay";
106 };
107
108 &ehci0 {
109 status = "okay";
110 };
111
112 &ehci3 {
113 status = "okay";
114 };
115
116 &gpu {
117 mali-supply = <&reg_dcdcc>;
118 status = "okay";
119 };
120
121 &hdmi {
122 status = "okay";
123 };
124
125 &hdmi_out {
126 hdmi_out_con: endpoint {
127 remote-endpoint = <&hdmi_con_in>;
128 };
129 };
130
131 &mmc0 {
132 vmmc-supply = <&reg_cldo1>;
133 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
134 disable-wp;
135 bus-width = <4>;
136 status = "okay";
137 };
138
139 &mmc1 {
140 vmmc-supply = <&reg_vcc33_wifi>;
141 vqmmc-supply = <&reg_vcc_wifi_io>;
142 mmc-pwrseq = <&wifi_pwrseq>;
143 bus-width = <4>;
144 non-removable;
145 status = "okay";
146
147 brcm: wifi@1 {
148 reg = <1>;
149 compatible = "brcm,bcm4329-fmac";
150 interrupt-parent = <&r_pio>;
151 interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
152 interrupt-names = "host-wake";
153 };
154 };
155
156 &mmc2 {
157 vmmc-supply = <&reg_cldo1>;
158 vqmmc-supply = <&reg_bldo2>;
159 cap-mmc-hw-reset;
160 non-removable;
161 bus-width = <8>;
162 status = "okay";
163 };
164
165 &ohci0 {
166 status = "okay";
167 };
168
169 &ohci3 {
170 status = "okay";
171 };
172
173 &pio {
174 vcc-pc-supply = <&reg_bldo2>;
175 vcc-pd-supply = <&reg_cldo1>;
176 vcc-pg-supply = <&reg_vcc_wifi_io>;
177 };
178
179 &r_i2c {
180 status = "okay";
181
182 axp805: pmic@36 {
183 compatible = "x-powers,axp805", "x-powers,axp806";
184 reg = <0x36>;
185 interrupt-parent = <&r_intc>;
186 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
187 interrupt-controller;
188 #interrupt-cells = <1>;
189 x-powers,self-working-mode;
190 vina-supply = <&reg_vcc5v>;
191 vinb-supply = <&reg_vcc5v>;
192 vinc-supply = <&reg_vcc5v>;
193 vind-supply = <&reg_vcc5v>;
194 vine-supply = <&reg_vcc5v>;
195 aldoin-supply = <&reg_vcc5v>;
196 bldoin-supply = <&reg_vcc5v>;
197 cldoin-supply = <&reg_vcc5v>;
198
199 regulators {
200 reg_aldo1: aldo1 {
201 regulator-always-on;
202 regulator-min-microvolt = <3300000>;
203 regulator-max-microvolt = <3300000>;
204 regulator-name = "vcc-pl-led-ir";
205 };
206
207 reg_aldo2: aldo2 {
208 regulator-min-microvolt = <3300000>;
209 regulator-max-microvolt = <3300000>;
210 regulator-name = "vcc33-audio-tv-ephy-mac";
211 };
212
213 /* ALDO3 is shorted to CLDO1 */
214 reg_aldo3: aldo3 {
215 regulator-always-on;
216 regulator-min-microvolt = <3300000>;
217 regulator-max-microvolt = <3300000>;
218 regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
219 };
220
221 reg_bldo1: bldo1 {
222 regulator-always-on;
223 regulator-min-microvolt = <1800000>;
224 regulator-max-microvolt = <1800000>;
225 regulator-name = "vcc18-dram-bias-pll";
226 };
227
228 reg_bldo2: bldo2 {
229 regulator-always-on;
230 regulator-min-microvolt = <1800000>;
231 regulator-max-microvolt = <1800000>;
232 regulator-name = "vcc-efuse-pcie-hdmi-pc";
233 };
234
235 bldo3 {
236 /* unused */
237 };
238
239 bldo4 {
240 /* unused */
241 };
242
243 reg_cldo1: cldo1 {
244 regulator-always-on;
245 regulator-min-microvolt = <3300000>;
246 regulator-max-microvolt = <3300000>;
247 regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
248 };
249
250 cldo2 {
251 /* unused */
252 };
253
254 cldo3 {
255 /* unused */
256 };
257
258 reg_dcdca: dcdca {
259 regulator-always-on;
260 regulator-min-microvolt = <800000>;
261 regulator-max-microvolt = <1160000>;
262 regulator-ramp-delay = <2500>;
263 regulator-name = "vdd-cpu";
264 };
265
266 reg_dcdcc: dcdcc {
267 regulator-enable-ramp-delay = <32000>;
268 regulator-min-microvolt = <810000>;
269 regulator-max-microvolt = <1080000>;
270 regulator-ramp-delay = <2500>;
271 regulator-name = "vdd-gpu";
272 };
273
274 reg_dcdcd: dcdcd {
275 regulator-always-on;
276 regulator-min-microvolt = <960000>;
277 regulator-max-microvolt = <960000>;
278 regulator-name = "vdd-sys";
279 };
280
281 reg_dcdce: dcdce {
282 regulator-always-on;
283 regulator-min-microvolt = <1200000>;
284 regulator-max-microvolt = <1200000>;
285 regulator-name = "vcc-dram";
286 };
287
288 sw {
289 /* unused */
290 };
291 };
292 };
293 };
294
295 &r_ir {
296 status = "okay";
297 };
298
299 &rtc {
300 clocks = <&ext_osc32k>;
301 };
302
303 &uart0 {
304 pinctrl-names = "default";
305 pinctrl-0 = <&uart0_ph_pins>;
306 status = "okay";
307 };
308
309 /* There's the BT part of the AP6256 connected to that UART */
310 &uart1 {
311 pinctrl-names = "default";
312 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
313 uart-has-rtscts;
314 status = "okay";
315
316 bluetooth {
317 compatible = "brcm,bcm4345c5";
318 clocks = <&rtc CLK_OSC32K_FANOUT>;
319 clock-names = "lpo";
320 device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
321 host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
322 shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
323 max-speed = <1500000>;
324 };
325 };
326
327 &usb2otg {
328 /*
329 * This board doesn't have a controllable VBUS even though it
330 * does have an ID pin. Using it as anything but a USB host is
331 * unsafe.
332 */
333 dr_mode = "host";
334 status = "okay";
335 };
336
337 &usb2phy {
338 usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
339 usb0_vbus-supply = <&reg_vcc5v>;
340 usb3_vbus-supply = <&reg_vcc5v>;
341 status = "okay";
342 };
343
344 &usb3phy {
345 status = "okay";
346 };