| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (C) 2021 Chukun Pan <[email protected]> |
| 4 |
* |
| 5 |
* Based on sun50i-h5-nanopi-neo-plus2.dts, which is: |
| 6 |
* Copyright (C) 2017 Antony Antony <[email protected]> |
| 7 |
* Copyright (C) 2016 ARM Ltd. |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
#include "sun50i-h5.dtsi" |
| 12 |
#include "sun50i-h5-cpu-opp.dtsi" |
| 13 |
|
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
#include <dt-bindings/input/input.h> |
| 16 |
#include <dt-bindings/leds/common.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "FriendlyARM NanoPi R1S H5"; |
| 20 |
compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
ethernet0 = &emac; |
| 24 |
ethernet1 = &rtl8189etv; |
| 25 |
serial0 = &uart0; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
stdout-path = "serial0:115200n8"; |
| 30 |
}; |
| 31 |
|
| 32 |
leds { |
| 33 |
compatible = "gpio-leds"; |
| 34 |
|
| 35 |
led-0 { |
| 36 |
function = LED_FUNCTION_LAN; |
| 37 |
color = <LED_COLOR_ID_GREEN>; |
| 38 |
gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; |
| 39 |
}; |
| 40 |
|
| 41 |
led-1 { |
| 42 |
function = LED_FUNCTION_STATUS; |
| 43 |
color = <LED_COLOR_ID_RED>; |
| 44 |
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; |
| 45 |
linux,default-trigger = "heartbeat"; |
| 46 |
}; |
| 47 |
|
| 48 |
led-2 { |
| 49 |
function = LED_FUNCTION_WAN; |
| 50 |
color = <LED_COLOR_ID_GREEN>; |
| 51 |
gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
gpio-keys { |
| 56 |
compatible = "gpio-keys"; |
| 57 |
|
| 58 |
key-reset { |
| 59 |
label = "reset"; |
| 60 |
linux,code = <KEY_RESTART>; |
| 61 |
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
reg_gmac_3v3: gmac-3v3 { |
| 66 |
compatible = "regulator-fixed"; |
| 67 |
regulator-name = "gmac-3v3"; |
| 68 |
regulator-min-microvolt = <3300000>; |
| 69 |
regulator-max-microvolt = <3300000>; |
| 70 |
startup-delay-us = <100000>; |
| 71 |
enable-active-high; |
| 72 |
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; |
| 73 |
}; |
| 74 |
|
| 75 |
reg_vcc3v3: vcc3v3 { |
| 76 |
compatible = "regulator-fixed"; |
| 77 |
regulator-name = "vcc3v3"; |
| 78 |
regulator-min-microvolt = <3300000>; |
| 79 |
regulator-max-microvolt = <3300000>; |
| 80 |
}; |
| 81 |
|
| 82 |
reg_usb0_vbus: usb0-vbus { |
| 83 |
compatible = "regulator-fixed"; |
| 84 |
regulator-name = "usb0-vbus"; |
| 85 |
regulator-min-microvolt = <5000000>; |
| 86 |
regulator-max-microvolt = <5000000>; |
| 87 |
enable-active-high; |
| 88 |
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ |
| 89 |
status = "okay"; |
| 90 |
}; |
| 91 |
|
| 92 |
vdd_cpux: gpio-regulator { |
| 93 |
compatible = "regulator-gpio"; |
| 94 |
regulator-name = "vdd-cpux"; |
| 95 |
regulator-type = "voltage"; |
| 96 |
regulator-boot-on; |
| 97 |
regulator-always-on; |
| 98 |
regulator-min-microvolt = <1100000>; |
| 99 |
regulator-max-microvolt = <1300000>; |
| 100 |
regulator-ramp-delay = <50>; /* 4ms */ |
| 101 |
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; |
| 102 |
gpios-states = <0x1>; |
| 103 |
states = <1100000 0x0>, <1300000 0x1>; |
| 104 |
}; |
| 105 |
|
| 106 |
wifi_pwrseq: pwrseq { |
| 107 |
compatible = "mmc-pwrseq-simple"; |
| 108 |
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ |
| 109 |
post-power-on-delay-ms = <200>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
&cpu0 { |
| 114 |
cpu-supply = <&vdd_cpux>; |
| 115 |
}; |
| 116 |
|
| 117 |
&ehci1 { |
| 118 |
status = "okay"; |
| 119 |
}; |
| 120 |
|
| 121 |
&ehci2 { |
| 122 |
status = "okay"; |
| 123 |
}; |
| 124 |
|
| 125 |
&emac { |
| 126 |
pinctrl-names = "default"; |
| 127 |
pinctrl-0 = <&emac_rgmii_pins>; |
| 128 |
phy-supply = <®_gmac_3v3>; |
| 129 |
phy-handle = <&ext_rgmii_phy>; |
| 130 |
phy-mode = "rgmii-id"; |
| 131 |
status = "okay"; |
| 132 |
}; |
| 133 |
|
| 134 |
&external_mdio { |
| 135 |
ext_rgmii_phy: ethernet-phy@7 { |
| 136 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 137 |
reg = <7>; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
&i2c0 { |
| 142 |
status = "okay"; |
| 143 |
|
| 144 |
eeprom@51 { |
| 145 |
compatible = "microchip,24c02", "atmel,24c02"; |
| 146 |
reg = <0x51>; |
| 147 |
pagesize = <16>; |
| 148 |
read-only; |
| 149 |
#address-cells = <1>; |
| 150 |
#size-cells = <1>; |
| 151 |
|
| 152 |
eth_mac1: mac-address@fa { |
| 153 |
reg = <0xfa 0x06>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
&mmc0 { |
| 159 |
vmmc-supply = <®_vcc3v3>; |
| 160 |
disable-wp; |
| 161 |
bus-width = <4>; |
| 162 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 163 |
status = "okay"; |
| 164 |
}; |
| 165 |
|
| 166 |
&mmc1 { |
| 167 |
vmmc-supply = <®_vcc3v3>; |
| 168 |
vqmmc-supply = <®_vcc3v3>; |
| 169 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 170 |
bus-width = <4>; |
| 171 |
non-removable; |
| 172 |
status = "okay"; |
| 173 |
|
| 174 |
rtl8189etv: wifi@1 { |
| 175 |
reg = <1>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&ohci1 { |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
&ohci2 { |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
|
| 187 |
&uart0 { |
| 188 |
pinctrl-names = "default"; |
| 189 |
pinctrl-0 = <&uart0_pa_pins>; |
| 190 |
status = "okay"; |
| 191 |
}; |
| 192 |
|
| 193 |
&usb_otg { |
| 194 |
dr_mode = "peripheral"; |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&usbphy { |
| 199 |
/* USB Type-A port's VBUS is always on */ |
| 200 |
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ |
| 201 |
usb0_vbus-supply = <®_usb0_vbus>; |
| 202 |
status = "okay"; |
| 203 |
}; |