| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
// Copyright (C) Harald Geyer <[email protected]> |
| 3 |
// based on sun50i-a64-olinuxino.dts by Jagan Teki <[email protected]> |
| 4 |
|
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "sun50i-a64.dtsi" |
| 8 |
#include "sun50i-a64-cpu-opp.dtsi" |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
#include <dt-bindings/pwm/pwm.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Olimex A64 Teres-I"; |
| 16 |
compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; |
| 17 |
chassis-type = "laptop"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &uart0; |
| 21 |
}; |
| 22 |
|
| 23 |
backlight: backlight { |
| 24 |
compatible = "pwm-backlight"; |
| 25 |
pwms = <&pwm 0 50000 0>; |
| 26 |
power-supply = <®_dcdc1>; |
| 27 |
brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>; |
| 28 |
default-brightness-level = <5>; |
| 29 |
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ |
| 30 |
}; |
| 31 |
|
| 32 |
chosen { |
| 33 |
stdout-path = "serial0:115200n8"; |
| 34 |
|
| 35 |
framebuffer-lcd { |
| 36 |
eDP25-supply = <®_dldo2>; |
| 37 |
eDP12-supply = <®_dldo3>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
gpio-keys { |
| 42 |
compatible = "gpio-keys"; |
| 43 |
|
| 44 |
lid-switch { |
| 45 |
label = "Lid Switch"; |
| 46 |
gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ |
| 47 |
linux,input-type = <EV_SW>; |
| 48 |
linux,code = <SW_LID>; |
| 49 |
wakeup-source; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
leds { |
| 54 |
compatible = "gpio-leds"; |
| 55 |
|
| 56 |
led-0 { |
| 57 |
label = "teres-i:green:capslock"; |
| 58 |
gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ |
| 59 |
}; |
| 60 |
|
| 61 |
led-1 { |
| 62 |
label = "teres-i:green:numlock"; |
| 63 |
gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
reg_usb1_vbus: usb1-vbus { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
regulator-name = "usb1-vbus"; |
| 70 |
regulator-min-microvolt = <5000000>; |
| 71 |
regulator-max-microvolt = <5000000>; |
| 72 |
enable-active-high; |
| 73 |
gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ |
| 74 |
status = "okay"; |
| 75 |
}; |
| 76 |
|
| 77 |
wifi_pwrseq: pwrseq { |
| 78 |
compatible = "mmc-pwrseq-simple"; |
| 79 |
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ |
| 80 |
}; |
| 81 |
|
| 82 |
speaker_amp: audio-amplifier { |
| 83 |
compatible = "simple-audio-amplifier"; |
| 84 |
enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ |
| 85 |
sound-name-prefix = "Speaker Amp"; |
| 86 |
}; |
| 87 |
}; |
| 88 |
|
| 89 |
&codec { |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
&codec_analog { |
| 94 |
cpvdd-supply = <®_eldo1>; |
| 95 |
status = "okay"; |
| 96 |
}; |
| 97 |
|
| 98 |
&dai { |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
&de { |
| 103 |
status = "okay"; |
| 104 |
}; |
| 105 |
|
| 106 |
&cpu0 { |
| 107 |
cpu-supply = <®_dcdc2>; |
| 108 |
}; |
| 109 |
|
| 110 |
&cpu1 { |
| 111 |
cpu-supply = <®_dcdc2>; |
| 112 |
}; |
| 113 |
|
| 114 |
&cpu2 { |
| 115 |
cpu-supply = <®_dcdc2>; |
| 116 |
}; |
| 117 |
|
| 118 |
&cpu3 { |
| 119 |
cpu-supply = <®_dcdc2>; |
| 120 |
}; |
| 121 |
|
| 122 |
&ehci1 { |
| 123 |
status = "okay"; |
| 124 |
}; |
| 125 |
|
| 126 |
|
| 127 |
&i2c0 { |
| 128 |
clock-frequency = <100000>; |
| 129 |
status = "okay"; |
| 130 |
|
| 131 |
anx6345: anx6345@38 { |
| 132 |
compatible = "analogix,anx6345"; |
| 133 |
reg = <0x38>; |
| 134 |
reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ |
| 135 |
dvdd25-supply = <®_dldo2>; |
| 136 |
dvdd12-supply = <®_dldo3>; |
| 137 |
|
| 138 |
ports { |
| 139 |
#address-cells = <1>; |
| 140 |
#size-cells = <0>; |
| 141 |
|
| 142 |
port@0 { |
| 143 |
reg = <0>; |
| 144 |
|
| 145 |
anx6345_in: endpoint { |
| 146 |
remote-endpoint = <&tcon0_out_anx6345>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
&mixer0 { |
| 154 |
status = "okay"; |
| 155 |
}; |
| 156 |
|
| 157 |
&mmc0 { |
| 158 |
pinctrl-names = "default"; |
| 159 |
pinctrl-0 = <&mmc0_pins>; |
| 160 |
vmmc-supply = <®_dcdc1>; |
| 161 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; |
| 162 |
disable-wp; |
| 163 |
bus-width = <4>; |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&mmc1 { |
| 168 |
pinctrl-names = "default"; |
| 169 |
pinctrl-0 = <&mmc1_pins>; |
| 170 |
vmmc-supply = <®_aldo2>; |
| 171 |
vqmmc-supply = <®_dldo4>; |
| 172 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 173 |
bus-width = <4>; |
| 174 |
non-removable; |
| 175 |
status = "okay"; |
| 176 |
|
| 177 |
rtl8723bs: wifi@1 { |
| 178 |
reg = <1>; |
| 179 |
interrupt-parent = <&r_pio>; |
| 180 |
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ |
| 181 |
interrupt-names = "host-wake"; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
&mmc2 { |
| 186 |
pinctrl-names = "default"; |
| 187 |
pinctrl-0 = <&mmc2_pins>; |
| 188 |
vmmc-supply = <®_dcdc1>; |
| 189 |
vqmmc-supply = <®_dcdc1>; |
| 190 |
bus-width = <8>; |
| 191 |
non-removable; |
| 192 |
cap-mmc-hw-reset; |
| 193 |
status = "okay"; |
| 194 |
}; |
| 195 |
|
| 196 |
&ohci1 { |
| 197 |
status = "okay"; |
| 198 |
}; |
| 199 |
|
| 200 |
&pio { |
| 201 |
vcc-pc-supply = <®_dcdc1>; |
| 202 |
vcc-pd-supply = <®_dldo2>; |
| 203 |
vcc-pe-supply = <®_aldo1>; |
| 204 |
vcc-pf-supply = <®_dcdc1>; /* No dedicated supply-pin for this */ |
| 205 |
vcc-pg-supply = <®_aldo2>; |
| 206 |
}; |
| 207 |
|
| 208 |
&pwm { |
| 209 |
status = "okay"; |
| 210 |
}; |
| 211 |
|
| 212 |
&r_rsb { |
| 213 |
status = "okay"; |
| 214 |
|
| 215 |
axp803: pmic@3a3 { |
| 216 |
compatible = "x-powers,axp803"; |
| 217 |
reg = <0x3a3>; |
| 218 |
interrupt-parent = <&r_intc>; |
| 219 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 220 |
}; |
| 221 |
}; |
| 222 |
|
| 223 |
#include "axp803.dtsi" |
| 224 |
|
| 225 |
&ac_power_supply { |
| 226 |
status = "okay"; |
| 227 |
}; |
| 228 |
|
| 229 |
&battery_power_supply { |
| 230 |
status = "okay"; |
| 231 |
}; |
| 232 |
|
| 233 |
®_aldo1 { |
| 234 |
regulator-always-on; |
| 235 |
regulator-min-microvolt = <2800000>; |
| 236 |
regulator-max-microvolt = <2800000>; |
| 237 |
regulator-name = "vcc-pe"; |
| 238 |
}; |
| 239 |
|
| 240 |
®_aldo2 { |
| 241 |
regulator-always-on; |
| 242 |
regulator-min-microvolt = <3300000>; |
| 243 |
regulator-max-microvolt = <3300000>; |
| 244 |
regulator-name = "vcc-pl"; |
| 245 |
}; |
| 246 |
|
| 247 |
®_aldo3 { |
| 248 |
regulator-always-on; |
| 249 |
regulator-min-microvolt = <3000000>; |
| 250 |
regulator-max-microvolt = <3000000>; |
| 251 |
regulator-name = "vcc-pll-avcc"; |
| 252 |
}; |
| 253 |
|
| 254 |
®_dcdc1 { |
| 255 |
regulator-always-on; |
| 256 |
regulator-min-microvolt = <3300000>; |
| 257 |
regulator-max-microvolt = <3300000>; |
| 258 |
regulator-name = "vcc-3v3"; |
| 259 |
}; |
| 260 |
|
| 261 |
®_dcdc2 { |
| 262 |
regulator-always-on; |
| 263 |
regulator-min-microvolt = <1040000>; |
| 264 |
regulator-max-microvolt = <1300000>; |
| 265 |
regulator-name = "vdd-cpux"; |
| 266 |
}; |
| 267 |
|
| 268 |
/* DCDC3 is polyphased with DCDC2 */ |
| 269 |
|
| 270 |
®_dcdc5 { |
| 271 |
regulator-always-on; |
| 272 |
regulator-min-microvolt = <1500000>; |
| 273 |
regulator-max-microvolt = <1500000>; |
| 274 |
regulator-name = "vcc-ddr3"; |
| 275 |
}; |
| 276 |
|
| 277 |
®_dcdc6 { |
| 278 |
regulator-always-on; |
| 279 |
regulator-min-microvolt = <1100000>; |
| 280 |
regulator-max-microvolt = <1100000>; |
| 281 |
regulator-name = "vdd-sys"; |
| 282 |
}; |
| 283 |
|
| 284 |
®_dldo1 { |
| 285 |
regulator-min-microvolt = <3300000>; |
| 286 |
regulator-max-microvolt = <3300000>; |
| 287 |
regulator-name = "vcc-hdmi"; |
| 288 |
}; |
| 289 |
|
| 290 |
®_dldo2 { |
| 291 |
regulator-min-microvolt = <2500000>; |
| 292 |
regulator-max-microvolt = <2500000>; |
| 293 |
regulator-name = "vcc-pd"; |
| 294 |
}; |
| 295 |
|
| 296 |
®_dldo3 { |
| 297 |
regulator-min-microvolt = <1200000>; |
| 298 |
regulator-max-microvolt = <1200000>; |
| 299 |
regulator-name = "vdd-edp"; |
| 300 |
}; |
| 301 |
|
| 302 |
®_dldo4 { |
| 303 |
regulator-min-microvolt = <3300000>; |
| 304 |
regulator-max-microvolt = <3300000>; |
| 305 |
regulator-name = "vcc-wifi-io"; |
| 306 |
}; |
| 307 |
|
| 308 |
®_eldo1 { |
| 309 |
regulator-min-microvolt = <1800000>; |
| 310 |
regulator-max-microvolt = <1800000>; |
| 311 |
regulator-name = "cpvdd"; |
| 312 |
}; |
| 313 |
|
| 314 |
®_eldo2 { |
| 315 |
regulator-min-microvolt = <1800000>; |
| 316 |
regulator-max-microvolt = <1800000>; |
| 317 |
regulator-name = "vcc-dvdd-csi"; |
| 318 |
}; |
| 319 |
|
| 320 |
®_fldo1 { |
| 321 |
regulator-min-microvolt = <1200000>; |
| 322 |
regulator-max-microvolt = <1200000>; |
| 323 |
regulator-name = "vcc-1v2-hsic"; |
| 324 |
}; |
| 325 |
|
| 326 |
/* |
| 327 |
* The A64 chip cannot work with this regulator off, although |
| 328 |
* it seems to be only driving the AR100 core. |
| 329 |
* Maybe we don't still know well about CPUs domain. |
| 330 |
*/ |
| 331 |
®_fldo2 { |
| 332 |
regulator-always-on; |
| 333 |
regulator-min-microvolt = <1100000>; |
| 334 |
regulator-max-microvolt = <1100000>; |
| 335 |
regulator-name = "vdd-cpus"; |
| 336 |
}; |
| 337 |
|
| 338 |
®_rtc_ldo { |
| 339 |
regulator-name = "vcc-rtc"; |
| 340 |
}; |
| 341 |
|
| 342 |
&simplefb_hdmi { |
| 343 |
vcc-hdmi-supply = <®_dldo1>; |
| 344 |
}; |
| 345 |
|
| 346 |
&sound { |
| 347 |
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; |
| 348 |
simple-audio-card,widgets = "Headphone", "Headphone Jack", |
| 349 |
"Microphone", "Headset Microphone", |
| 350 |
"Microphone", "Internal Microphone", |
| 351 |
"Speaker", "Internal Speaker"; |
| 352 |
simple-audio-card,routing = |
| 353 |
"Left DAC", "DACL", |
| 354 |
"Right DAC", "DACR", |
| 355 |
"ADCL", "Left ADC", |
| 356 |
"ADCR", "Right ADC", |
| 357 |
"Headphone Jack", "HP", |
| 358 |
"Speaker Amp INL", "LINEOUT", |
| 359 |
"Speaker Amp INR", "LINEOUT", |
| 360 |
"Internal Speaker", "Speaker Amp OUTL", |
| 361 |
"Internal Speaker", "Speaker Amp OUTR", |
| 362 |
"Internal Microphone", "MBIAS", |
| 363 |
"MIC1", "Internal Microphone", |
| 364 |
"Headset Microphone", "HBIAS", |
| 365 |
"MIC2", "Headset Microphone"; |
| 366 |
status = "okay"; |
| 367 |
}; |
| 368 |
|
| 369 |
&tcon0 { |
| 370 |
pinctrl-names = "default"; |
| 371 |
pinctrl-0 = <&lcd_rgb666_pins>; |
| 372 |
assigned-clocks = <&ccu CLK_TCON0>; |
| 373 |
assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>; |
| 374 |
|
| 375 |
status = "okay"; |
| 376 |
}; |
| 377 |
|
| 378 |
&tcon0_out { |
| 379 |
tcon0_out_anx6345: endpoint@0 { |
| 380 |
reg = <0>; |
| 381 |
remote-endpoint = <&anx6345_in>; |
| 382 |
}; |
| 383 |
}; |
| 384 |
|
| 385 |
&uart0 { |
| 386 |
pinctrl-names = "default"; |
| 387 |
pinctrl-0 = <&uart0_pb_pins>; |
| 388 |
status = "okay"; |
| 389 |
}; |
| 390 |
|
| 391 |
&usbphy { |
| 392 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 393 |
status = "okay"; |
| 394 |
}; |