Debian Codegraph @

scripts/dtc/include-prefixes/arm64/allwinner/sun50i-a64-sopine-baseboard.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 // Copyright (c) 2017 Icenowy Zheng <[email protected]>
3 // Based on sun50i-a64-pine64.dts, which is:
4 // Copyright (c) 2016 ARM Ltd.
5
6 /dts-v1/;
7
8 #include "sun50i-a64-sopine.dtsi"
9
10 / {
11 model = "Pine64 SOPINE on Baseboard carrier board";
12 compatible = "pine64,sopine-baseboard", "pine64,sopine",
13 "allwinner,sun50i-a64";
14
15 aliases {
16 ethernet0 = &emac;
17 serial0 = &uart0;
18 serial1 = &uart1;
19 serial2 = &uart2;
20 serial3 = &uart3;
21 serial4 = &uart4;
22 };
23
24 chosen {
25 stdout-path = "serial0:115200n8";
26 };
27
28 hdmi-connector {
29 compatible = "hdmi-connector";
30 type = "a";
31
32 port {
33 hdmi_con_in: endpoint {
34 remote-endpoint = <&hdmi_out_con>;
35 };
36 };
37 };
38
39 reg_vcc1v8: vcc1v8 {
40 compatible = "regulator-fixed";
41 regulator-name = "vcc1v8";
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
44 };
45 };
46
47 &ac_power_supply {
48 status = "okay";
49 };
50
51 &battery_power_supply {
52 status = "okay";
53 };
54
55 &codec {
56 status = "okay";
57 };
58
59 &codec_analog {
60 status = "okay";
61 };
62
63 &dai {
64 status = "okay";
65 };
66
67 &de {
68 status = "okay";
69 };
70
71 &ehci0 {
72 status = "okay";
73 };
74
75 &ehci1 {
76 status = "okay";
77 };
78
79 &emac {
80 pinctrl-names = "default";
81 pinctrl-0 = <&rgmii_pins>;
82 phy-mode = "rgmii-txid";
83 phy-handle = <&ext_rgmii_phy>;
84 phy-supply = <&reg_dc1sw>;
85 status = "okay";
86 };
87
88 &hdmi {
89 hvcc-supply = <&reg_dldo1>;
90 status = "okay";
91 };
92
93 &hdmi_out {
94 hdmi_out_con: endpoint {
95 remote-endpoint = <&hdmi_con_in>;
96 };
97 };
98
99 &mdio {
100 ext_rgmii_phy: ethernet-phy@1 {
101 compatible = "ethernet-phy-ieee802.3-c22";
102 reg = <1>;
103 };
104 };
105
106 /* On Wifi/BT connector */
107 &mmc1 {
108 pinctrl-names = "default";
109 pinctrl-0 = <&mmc1_pins>;
110 vmmc-supply = <&reg_dldo4>;
111 vqmmc-supply = <&reg_eldo1>;
112 bus-width = <4>;
113 non-removable;
114 status = "disabled";
115 };
116
117 &mmc2 {
118 pinctrl-names = "default";
119 pinctrl-0 = <&mmc2_pins>;
120 vmmc-supply = <&reg_dcdc1>;
121 vqmmc-supply = <&reg_vcc1v8>;
122 bus-width = <8>;
123 non-removable;
124 cap-mmc-hw-reset;
125 mmc-hs200-1_8v;
126 status = "okay";
127 };
128
129 &ohci0 {
130 status = "okay";
131 };
132
133 &ohci1 {
134 status = "okay";
135 };
136
137 &reg_dc1sw {
138 /*
139 * Ethernet PHY needs 30ms to properly power up and some more
140 * to initialize. 100ms should be plenty of time to finish
141 * whole process.
142 */
143 regulator-enable-ramp-delay = <100000>;
144 regulator-name = "vcc-phy";
145 };
146
147 &reg_dldo1 {
148 regulator-min-microvolt = <3300000>;
149 regulator-max-microvolt = <3300000>;
150 regulator-name = "vcc-hdmi";
151 };
152
153 &reg_dldo2 {
154 regulator-min-microvolt = <3300000>;
155 regulator-max-microvolt = <3300000>;
156 regulator-name = "vcc-mipi";
157 };
158
159 &reg_dldo4 {
160 regulator-min-microvolt = <3300000>;
161 regulator-max-microvolt = <3300000>;
162 regulator-name = "vcc-wifi";
163 };
164
165 &simplefb_hdmi {
166 vcc-hdmi-supply = <&reg_dldo1>;
167 };
168
169 &sound {
170 simple-audio-card,aux-devs = <&codec_analog>;
171 simple-audio-card,widgets = "Microphone", "Microphone Jack",
172 "Headphone", "Headphone Jack";
173 simple-audio-card,routing =
174 "Left DAC", "DACL",
175 "Right DAC", "DACR",
176 "Headphone Jack", "HP",
177 "ADCL", "Left ADC",
178 "ADCR", "Right ADC",
179 "MIC2", "Microphone Jack";
180 status = "okay";
181 };
182
183 &uart0 {
184 pinctrl-names = "default";
185 pinctrl-0 = <&uart0_pb_pins>;
186 status = "okay";
187 };
188
189 /* On Wifi/BT connector, with RTS/CTS */
190 &uart1 {
191 pinctrl-names = "default";
192 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
193 uart-has-rtscts;
194 status = "disabled";
195 };
196
197 /* On Pi-2 connector */
198 &uart2 {
199 pinctrl-names = "default";
200 pinctrl-0 = <&uart2_pins>;
201 status = "disabled";
202 };
203
204 /* On Euler connector */
205 &uart3 {
206 pinctrl-names = "default";
207 pinctrl-0 = <&uart3_pins>;
208 status = "disabled";
209 };
210
211 /* On Euler connector, RTS/CTS optional */
212 &uart4 {
213 pinctrl-names = "default";
214 pinctrl-0 = <&uart4_pins>;
215 status = "disabled";
216 };
217
218 &usb_otg {
219 dr_mode = "host";
220 status = "okay";
221 };
222
223 &usbphy {
224 status = "okay";
225 };