| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
// Copyright (C) 2017 Icenowy Zheng <[email protected]> |
| 3 |
// Copyright (C) 2018 Vasily Khoruzhick <[email protected]> |
| 4 |
|
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "sun50i-a64.dtsi" |
| 8 |
#include "sun50i-a64-cpu-opp.dtsi" |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/gpio-keys.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/pwm/pwm.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Pine64 Pinebook"; |
| 17 |
compatible = "pine64,pinebook", "allwinner,sun50i-a64"; |
| 18 |
chassis-type = "laptop"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
serial0 = &uart0; |
| 22 |
ethernet0 = &rtl8723cs; |
| 23 |
}; |
| 24 |
|
| 25 |
backlight: backlight { |
| 26 |
compatible = "pwm-backlight"; |
| 27 |
pwms = <&pwm 0 50000 0>; |
| 28 |
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; |
| 29 |
default-brightness-level = <2>; |
| 30 |
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ |
| 31 |
power-supply = <®_vbklt>; |
| 32 |
}; |
| 33 |
|
| 34 |
chosen { |
| 35 |
stdout-path = "serial0:115200n8"; |
| 36 |
}; |
| 37 |
|
| 38 |
gpio-keys { |
| 39 |
compatible = "gpio-keys"; |
| 40 |
|
| 41 |
lid-switch { |
| 42 |
label = "Lid Switch"; |
| 43 |
gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ |
| 44 |
linux,input-type = <EV_SW>; |
| 45 |
linux,code = <SW_LID>; |
| 46 |
linux,can-disable; |
| 47 |
wakeup-source; |
| 48 |
wakeup-event-action = <EV_ACT_DEASSERTED>; |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
panel_edp: panel-edp { |
| 53 |
compatible = "neweast,wjfh116008a"; |
| 54 |
backlight = <&backlight>; |
| 55 |
power-supply = <®_dc1sw>; |
| 56 |
|
| 57 |
port { |
| 58 |
panel_edp_in: endpoint { |
| 59 |
remote-endpoint = <&anx6345_out_edp>; |
| 60 |
}; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
reg_vbklt: vbklt { |
| 65 |
compatible = "regulator-fixed"; |
| 66 |
regulator-name = "vbklt"; |
| 67 |
regulator-min-microvolt = <18000000>; |
| 68 |
regulator-max-microvolt = <18000000>; |
| 69 |
gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ |
| 70 |
enable-active-high; |
| 71 |
}; |
| 72 |
|
| 73 |
reg_vcc5v0: vcc5v0 { |
| 74 |
compatible = "regulator-fixed"; |
| 75 |
regulator-name = "vcc5v0"; |
| 76 |
regulator-min-microvolt = <5000000>; |
| 77 |
regulator-max-microvolt = <5000000>; |
| 78 |
gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; |
| 79 |
enable-active-high; |
| 80 |
}; |
| 81 |
|
| 82 |
wifi_pwrseq: pwrseq { |
| 83 |
compatible = "mmc-pwrseq-simple"; |
| 84 |
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ |
| 85 |
}; |
| 86 |
|
| 87 |
speaker_amp: audio-amplifier { |
| 88 |
compatible = "simple-audio-amplifier"; |
| 89 |
VCC-supply = <®_vcc5v0>; |
| 90 |
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ |
| 91 |
sound-name-prefix = "Speaker Amp"; |
| 92 |
}; |
| 93 |
|
| 94 |
}; |
| 95 |
|
| 96 |
&codec { |
| 97 |
status = "okay"; |
| 98 |
}; |
| 99 |
|
| 100 |
&codec_analog { |
| 101 |
cpvdd-supply = <®_eldo1>; |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
&cpu0 { |
| 106 |
cpu-supply = <®_dcdc2>; |
| 107 |
}; |
| 108 |
|
| 109 |
&cpu1 { |
| 110 |
cpu-supply = <®_dcdc2>; |
| 111 |
}; |
| 112 |
|
| 113 |
&cpu2 { |
| 114 |
cpu-supply = <®_dcdc2>; |
| 115 |
}; |
| 116 |
|
| 117 |
&cpu3 { |
| 118 |
cpu-supply = <®_dcdc2>; |
| 119 |
}; |
| 120 |
|
| 121 |
&dai { |
| 122 |
status = "okay"; |
| 123 |
}; |
| 124 |
|
| 125 |
&de { |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&ehci0 { |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
|
| 133 |
&ehci1 { |
| 134 |
status = "okay"; |
| 135 |
}; |
| 136 |
|
| 137 |
&mixer0 { |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&mmc0 { |
| 142 |
pinctrl-names = "default"; |
| 143 |
pinctrl-0 = <&mmc0_pins>; |
| 144 |
vmmc-supply = <®_dcdc1>; |
| 145 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 146 |
disable-wp; |
| 147 |
bus-width = <4>; |
| 148 |
status = "okay"; |
| 149 |
}; |
| 150 |
|
| 151 |
&mmc1 { |
| 152 |
pinctrl-names = "default"; |
| 153 |
pinctrl-0 = <&mmc1_pins>; |
| 154 |
vmmc-supply = <®_dldo4>; |
| 155 |
vqmmc-supply = <®_eldo1>; |
| 156 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 157 |
bus-width = <4>; |
| 158 |
non-removable; |
| 159 |
status = "okay"; |
| 160 |
|
| 161 |
rtl8723cs: wifi@1 { |
| 162 |
reg = <1>; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
&mmc2 { |
| 167 |
pinctrl-names = "default"; |
| 168 |
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; |
| 169 |
vmmc-supply = <®_dcdc1>; |
| 170 |
vqmmc-supply = <®_eldo1>; |
| 171 |
max-frequency = <200000000>; |
| 172 |
bus-width = <8>; |
| 173 |
non-removable; |
| 174 |
cap-mmc-hw-reset; |
| 175 |
mmc-hs200-1_8v; |
| 176 |
status = "okay"; |
| 177 |
}; |
| 178 |
|
| 179 |
&ohci0 { |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
&ohci1 { |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
|
| 187 |
&pio { |
| 188 |
vcc-pc-supply = <®_eldo1>; |
| 189 |
vcc-pd-supply = <®_dcdc1>; |
| 190 |
vcc-pe-supply = <®_aldo1>; |
| 191 |
vcc-pg-supply = <®_eldo1>; |
| 192 |
}; |
| 193 |
|
| 194 |
&pwm { |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&r_i2c { |
| 199 |
clock-frequency = <100000>; |
| 200 |
pinctrl-names = "default"; |
| 201 |
pinctrl-0 = <&r_i2c_pl89_pins>; |
| 202 |
status = "okay"; |
| 203 |
|
| 204 |
anx6345: anx6345@38 { |
| 205 |
compatible = "analogix,anx6345"; |
| 206 |
reg = <0x38>; |
| 207 |
reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ |
| 208 |
dvdd25-supply = <®_dldo2>; |
| 209 |
dvdd12-supply = <®_fldo1>; |
| 210 |
|
| 211 |
ports { |
| 212 |
#address-cells = <1>; |
| 213 |
#size-cells = <0>; |
| 214 |
|
| 215 |
anx6345_in: port@0 { |
| 216 |
reg = <0>; |
| 217 |
anx6345_in_tcon0: endpoint { |
| 218 |
remote-endpoint = <&tcon0_out_anx6345>; |
| 219 |
}; |
| 220 |
}; |
| 221 |
|
| 222 |
anx6345_out: port@1 { |
| 223 |
reg = <1>; |
| 224 |
anx6345_out_edp: endpoint { |
| 225 |
remote-endpoint = <&panel_edp_in>; |
| 226 |
}; |
| 227 |
}; |
| 228 |
}; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
&r_pio { |
| 233 |
/* |
| 234 |
* FIXME: We can't add that supply for now since it would |
| 235 |
* create a circular dependency between pinctrl, the regulator |
| 236 |
* and the RSB Bus. |
| 237 |
* |
| 238 |
* vcc-pl-supply = <®_aldo2>; |
| 239 |
*/ |
| 240 |
}; |
| 241 |
|
| 242 |
&r_rsb { |
| 243 |
status = "okay"; |
| 244 |
|
| 245 |
axp803: pmic@3a3 { |
| 246 |
compatible = "x-powers,axp803"; |
| 247 |
reg = <0x3a3>; |
| 248 |
interrupt-parent = <&r_intc>; |
| 249 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
#include "axp803.dtsi" |
| 254 |
|
| 255 |
&ac_power_supply { |
| 256 |
status = "okay"; |
| 257 |
}; |
| 258 |
|
| 259 |
&battery_power_supply { |
| 260 |
status = "okay"; |
| 261 |
}; |
| 262 |
|
| 263 |
®_aldo1 { |
| 264 |
regulator-name = "vcc-pe"; |
| 265 |
}; |
| 266 |
|
| 267 |
®_aldo2 { |
| 268 |
regulator-always-on; |
| 269 |
regulator-min-microvolt = <1800000>; |
| 270 |
regulator-max-microvolt = <3300000>; |
| 271 |
regulator-name = "vcc-pl"; |
| 272 |
}; |
| 273 |
|
| 274 |
®_aldo3 { |
| 275 |
regulator-always-on; |
| 276 |
regulator-min-microvolt = <2700000>; |
| 277 |
regulator-max-microvolt = <3300000>; |
| 278 |
regulator-name = "vcc-pll-avcc"; |
| 279 |
}; |
| 280 |
|
| 281 |
®_dc1sw { |
| 282 |
regulator-name = "vcc-lcd"; |
| 283 |
}; |
| 284 |
|
| 285 |
®_dcdc1 { |
| 286 |
regulator-always-on; |
| 287 |
regulator-min-microvolt = <3300000>; |
| 288 |
regulator-max-microvolt = <3300000>; |
| 289 |
regulator-name = "vcc-3v3"; |
| 290 |
}; |
| 291 |
|
| 292 |
®_dcdc2 { |
| 293 |
regulator-always-on; |
| 294 |
regulator-min-microvolt = <1000000>; |
| 295 |
regulator-max-microvolt = <1300000>; |
| 296 |
regulator-name = "vdd-cpux"; |
| 297 |
}; |
| 298 |
|
| 299 |
/* DCDC3 is polyphased with DCDC2 */ |
| 300 |
|
| 301 |
®_dcdc5 { |
| 302 |
regulator-always-on; |
| 303 |
regulator-min-microvolt = <1200000>; |
| 304 |
regulator-max-microvolt = <1200000>; |
| 305 |
regulator-name = "vcc-dram"; |
| 306 |
}; |
| 307 |
|
| 308 |
®_dcdc6 { |
| 309 |
regulator-always-on; |
| 310 |
regulator-min-microvolt = <1100000>; |
| 311 |
regulator-max-microvolt = <1100000>; |
| 312 |
regulator-name = "vdd-sys"; |
| 313 |
}; |
| 314 |
|
| 315 |
®_dldo1 { |
| 316 |
regulator-min-microvolt = <3300000>; |
| 317 |
regulator-max-microvolt = <3300000>; |
| 318 |
regulator-name = "vcc-hdmi"; |
| 319 |
}; |
| 320 |
|
| 321 |
®_dldo2 { |
| 322 |
regulator-min-microvolt = <2500000>; |
| 323 |
regulator-max-microvolt = <2500000>; |
| 324 |
regulator-name = "vcc-edp"; |
| 325 |
}; |
| 326 |
|
| 327 |
®_dldo4 { |
| 328 |
regulator-min-microvolt = <3300000>; |
| 329 |
regulator-max-microvolt = <3300000>; |
| 330 |
regulator-name = "vcc-wifi"; |
| 331 |
}; |
| 332 |
|
| 333 |
®_eldo1 { |
| 334 |
regulator-always-on; |
| 335 |
regulator-min-microvolt = <1800000>; |
| 336 |
regulator-max-microvolt = <1800000>; |
| 337 |
regulator-name = "cpvdd"; |
| 338 |
}; |
| 339 |
|
| 340 |
®_fldo1 { |
| 341 |
regulator-min-microvolt = <1200000>; |
| 342 |
regulator-max-microvolt = <1200000>; |
| 343 |
regulator-name = "vcc-1v2-hsic"; |
| 344 |
}; |
| 345 |
|
| 346 |
®_fldo2 { |
| 347 |
regulator-always-on; |
| 348 |
regulator-min-microvolt = <1100000>; |
| 349 |
regulator-max-microvolt = <1100000>; |
| 350 |
regulator-name = "vdd-cpus"; |
| 351 |
}; |
| 352 |
|
| 353 |
®_rtc_ldo { |
| 354 |
regulator-name = "vcc-rtc"; |
| 355 |
}; |
| 356 |
|
| 357 |
&simplefb_lcd { |
| 358 |
panel-supply = <®_dc1sw>; |
| 359 |
dvdd25-supply = <®_dldo2>; |
| 360 |
dvdd12-supply = <®_fldo1>; |
| 361 |
}; |
| 362 |
|
| 363 |
&simplefb_hdmi { |
| 364 |
vcc-hdmi-supply = <®_dldo1>; |
| 365 |
}; |
| 366 |
|
| 367 |
&sound { |
| 368 |
status = "okay"; |
| 369 |
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; |
| 370 |
simple-audio-card,widgets = "Microphone", "Internal Microphone Left", |
| 371 |
"Microphone", "Internal Microphone Right", |
| 372 |
"Headphone", "Headphone Jack", |
| 373 |
"Speaker", "Internal Speaker"; |
| 374 |
simple-audio-card,routing = |
| 375 |
"Left DAC", "DACL", |
| 376 |
"Right DAC", "DACR", |
| 377 |
"Speaker Amp INL", "LINEOUT", |
| 378 |
"Speaker Amp INR", "LINEOUT", |
| 379 |
"Internal Speaker", "Speaker Amp OUTL", |
| 380 |
"Internal Speaker", "Speaker Amp OUTR", |
| 381 |
"Headphone Jack", "HP", |
| 382 |
"ADCL", "Left ADC", |
| 383 |
"ADCR", "Right ADC", |
| 384 |
"Internal Microphone Left", "MBIAS", |
| 385 |
"MIC1", "Internal Microphone Left", |
| 386 |
"Internal Microphone Right", "HBIAS", |
| 387 |
"MIC2", "Internal Microphone Right"; |
| 388 |
}; |
| 389 |
|
| 390 |
&tcon0 { |
| 391 |
pinctrl-names = "default"; |
| 392 |
pinctrl-0 = <&lcd_rgb666_pins>; |
| 393 |
assigned-clocks = <&ccu CLK_TCON0>; |
| 394 |
assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>; |
| 395 |
|
| 396 |
status = "okay"; |
| 397 |
}; |
| 398 |
|
| 399 |
&tcon0_out { |
| 400 |
tcon0_out_anx6345: endpoint { |
| 401 |
remote-endpoint = <&anx6345_in_tcon0>; |
| 402 |
}; |
| 403 |
}; |
| 404 |
|
| 405 |
&uart0 { |
| 406 |
pinctrl-names = "default"; |
| 407 |
pinctrl-0 = <&uart0_pb_pins>; |
| 408 |
status = "okay"; |
| 409 |
}; |
| 410 |
|
| 411 |
&uart1 { |
| 412 |
pinctrl-names = "default"; |
| 413 |
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; |
| 414 |
uart-has-rtscts; |
| 415 |
status = "okay"; |
| 416 |
|
| 417 |
bluetooth { |
| 418 |
compatible = "realtek,rtl8723cs-bt"; |
| 419 |
device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ |
| 420 |
enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
| 421 |
host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| 422 |
}; |
| 423 |
}; |
| 424 |
|
| 425 |
&usb_otg { |
| 426 |
dr_mode = "host"; |
| 427 |
}; |
| 428 |
|
| 429 |
&usbphy { |
| 430 |
usb0_vbus-supply = <®_vcc5v0>; |
| 431 |
usb1_vbus-supply = <®_vcc5v0>; |
| 432 |
status = "okay"; |
| 433 |
}; |