| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
// Copyright (C) 2017 Jagan Teki <[email protected]> |
| 3 |
// Copyright (C) 2017-2018 Samuel Holland <[email protected]> |
| 4 |
|
| 5 |
/dts-v1/; |
| 6 |
|
| 7 |
#include "sun50i-a64.dtsi" |
| 8 |
#include "sun50i-a64-cpu-opp.dtsi" |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "OrangePi Win/Win Plus"; |
| 14 |
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; |
| 15 |
|
| 16 |
aliases { |
| 17 |
ethernet0 = &emac; |
| 18 |
serial0 = &uart0; |
| 19 |
serial1 = &uart1; |
| 20 |
serial2 = &uart2; |
| 21 |
serial3 = &uart3; |
| 22 |
serial4 = &uart4; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
stdout-path = "serial0:115200n8"; |
| 27 |
}; |
| 28 |
|
| 29 |
hdmi-connector { |
| 30 |
compatible = "hdmi-connector"; |
| 31 |
type = "a"; |
| 32 |
|
| 33 |
port { |
| 34 |
hdmi_con_in: endpoint { |
| 35 |
remote-endpoint = <&hdmi_out_con>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
leds { |
| 41 |
compatible = "gpio-leds"; |
| 42 |
|
| 43 |
led-0 { |
| 44 |
label = "orangepi:green:status"; |
| 45 |
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
reg_gmac_3v3: gmac-3v3 { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "gmac-3v3"; |
| 52 |
regulator-min-microvolt = <3300000>; |
| 53 |
regulator-max-microvolt = <3300000>; |
| 54 |
regulator-boot-on; |
| 55 |
enable-active-high; |
| 56 |
gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */ |
| 57 |
status = "okay"; |
| 58 |
}; |
| 59 |
|
| 60 |
reg_usb1_vbus: usb1-vbus { |
| 61 |
compatible = "regulator-fixed"; |
| 62 |
regulator-name = "usb1-vbus"; |
| 63 |
regulator-min-microvolt = <5000000>; |
| 64 |
regulator-max-microvolt = <5000000>; |
| 65 |
regulator-boot-on; |
| 66 |
enable-active-high; |
| 67 |
gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */ |
| 68 |
status = "okay"; |
| 69 |
}; |
| 70 |
|
| 71 |
wifi_pwrseq: pwrseq { |
| 72 |
compatible = "mmc-pwrseq-simple"; |
| 73 |
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ |
| 74 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 75 |
clock-names = "ext_clock"; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
&codec { |
| 80 |
status = "okay"; |
| 81 |
}; |
| 82 |
|
| 83 |
&codec_analog { |
| 84 |
cpvdd-supply = <®_eldo1>; |
| 85 |
status = "okay"; |
| 86 |
}; |
| 87 |
|
| 88 |
&cpu0 { |
| 89 |
cpu-supply = <®_dcdc2>; |
| 90 |
}; |
| 91 |
|
| 92 |
&cpu1 { |
| 93 |
cpu-supply = <®_dcdc2>; |
| 94 |
}; |
| 95 |
|
| 96 |
&cpu2 { |
| 97 |
cpu-supply = <®_dcdc2>; |
| 98 |
}; |
| 99 |
|
| 100 |
&cpu3 { |
| 101 |
cpu-supply = <®_dcdc2>; |
| 102 |
}; |
| 103 |
|
| 104 |
&dai { |
| 105 |
status = "okay"; |
| 106 |
}; |
| 107 |
|
| 108 |
&de { |
| 109 |
status = "okay"; |
| 110 |
}; |
| 111 |
|
| 112 |
&ehci0 { |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&ehci1 { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
&emac { |
| 121 |
pinctrl-names = "default"; |
| 122 |
pinctrl-0 = <&rgmii_pins>; |
| 123 |
phy-mode = "rgmii-id"; |
| 124 |
phy-handle = <&ext_rgmii_phy>; |
| 125 |
phy-supply = <®_gmac_3v3>; |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&hdmi { |
| 130 |
hvcc-supply = <®_dldo1>; |
| 131 |
status = "okay"; |
| 132 |
}; |
| 133 |
|
| 134 |
&hdmi_out { |
| 135 |
hdmi_out_con: endpoint { |
| 136 |
remote-endpoint = <&hdmi_con_in>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
&mdio { |
| 141 |
ext_rgmii_phy: ethernet-phy@1 { |
| 142 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 143 |
reg = <1>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
&mmc0 { |
| 148 |
pinctrl-names = "default"; |
| 149 |
pinctrl-0 = <&mmc0_pins>; |
| 150 |
vmmc-supply = <®_dcdc1>; |
| 151 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 152 |
disable-wp; |
| 153 |
bus-width = <4>; |
| 154 |
status = "okay"; |
| 155 |
}; |
| 156 |
|
| 157 |
&mmc1 { |
| 158 |
pinctrl-names = "default"; |
| 159 |
pinctrl-0 = <&mmc1_pins>; |
| 160 |
vmmc-supply = <®_dldo2>; |
| 161 |
vqmmc-supply = <®_dldo4>; |
| 162 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 163 |
bus-width = <4>; |
| 164 |
non-removable; |
| 165 |
status = "okay"; |
| 166 |
|
| 167 |
brcmf: wifi@1 { |
| 168 |
reg = <1>; |
| 169 |
compatible = "brcm,bcm4329-fmac"; |
| 170 |
interrupt-parent = <&r_pio>; |
| 171 |
interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ |
| 172 |
interrupt-names = "host-wake"; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
&ohci0 { |
| 177 |
status = "okay"; |
| 178 |
}; |
| 179 |
|
| 180 |
&ohci1 { |
| 181 |
status = "okay"; |
| 182 |
}; |
| 183 |
|
| 184 |
&r_ir { |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&r_rsb { |
| 189 |
status = "okay"; |
| 190 |
|
| 191 |
axp803: pmic@3a3 { |
| 192 |
compatible = "x-powers,axp803"; |
| 193 |
reg = <0x3a3>; |
| 194 |
interrupt-parent = <&r_intc>; |
| 195 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 196 |
x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ |
| 197 |
}; |
| 198 |
}; |
| 199 |
|
| 200 |
#include "axp803.dtsi" |
| 201 |
|
| 202 |
&ac_power_supply { |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&battery_power_supply { |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
®_aldo1 { |
| 211 |
regulator-min-microvolt = <2800000>; |
| 212 |
regulator-max-microvolt = <2800000>; |
| 213 |
regulator-name = "afvcc-csi"; |
| 214 |
}; |
| 215 |
|
| 216 |
®_aldo2 { |
| 217 |
regulator-always-on; |
| 218 |
regulator-min-microvolt = <1800000>; |
| 219 |
regulator-max-microvolt = <3300000>; |
| 220 |
regulator-name = "vcc-pl"; |
| 221 |
}; |
| 222 |
|
| 223 |
®_aldo3 { |
| 224 |
regulator-always-on; |
| 225 |
regulator-min-microvolt = <3000000>; |
| 226 |
regulator-max-microvolt = <3000000>; |
| 227 |
regulator-name = "vcc-pll-avcc"; |
| 228 |
}; |
| 229 |
|
| 230 |
®_dcdc1 { |
| 231 |
regulator-always-on; |
| 232 |
regulator-min-microvolt = <3300000>; |
| 233 |
regulator-max-microvolt = <3300000>; |
| 234 |
regulator-name = "vcc-3v3"; |
| 235 |
}; |
| 236 |
|
| 237 |
®_dcdc2 { |
| 238 |
regulator-always-on; |
| 239 |
regulator-min-microvolt = <1040000>; |
| 240 |
regulator-max-microvolt = <1300000>; |
| 241 |
regulator-name = "vdd-cpux"; |
| 242 |
}; |
| 243 |
|
| 244 |
/* DCDC3 is polyphased with DCDC2 */ |
| 245 |
|
| 246 |
®_dcdc5 { |
| 247 |
regulator-always-on; |
| 248 |
regulator-min-microvolt = <1500000>; |
| 249 |
regulator-max-microvolt = <1500000>; |
| 250 |
regulator-name = "vcc-dram"; |
| 251 |
}; |
| 252 |
|
| 253 |
®_dcdc6 { |
| 254 |
regulator-always-on; |
| 255 |
regulator-min-microvolt = <1100000>; |
| 256 |
regulator-max-microvolt = <1100000>; |
| 257 |
regulator-name = "vdd-sys"; |
| 258 |
}; |
| 259 |
|
| 260 |
®_dldo1 { |
| 261 |
regulator-min-microvolt = <3300000>; |
| 262 |
regulator-max-microvolt = <3300000>; |
| 263 |
regulator-name = "vcc-hdmi-dsi"; |
| 264 |
}; |
| 265 |
|
| 266 |
®_dldo2 { |
| 267 |
regulator-min-microvolt = <3300000>; |
| 268 |
regulator-max-microvolt = <3300000>; |
| 269 |
regulator-name = "vcc-wifi"; |
| 270 |
}; |
| 271 |
|
| 272 |
®_dldo3 { |
| 273 |
regulator-min-microvolt = <3300000>; |
| 274 |
regulator-max-microvolt = <3300000>; |
| 275 |
regulator-name = "avdd-csi"; |
| 276 |
}; |
| 277 |
|
| 278 |
®_dldo4 { |
| 279 |
regulator-min-microvolt = <3300000>; |
| 280 |
regulator-max-microvolt = <3300000>; |
| 281 |
regulator-name = "vcc-wifi-io"; |
| 282 |
}; |
| 283 |
|
| 284 |
®_drivevbus { |
| 285 |
regulator-name = "usb0-vbus"; |
| 286 |
status = "okay"; |
| 287 |
}; |
| 288 |
|
| 289 |
®_eldo1 { |
| 290 |
regulator-min-microvolt = <1800000>; |
| 291 |
regulator-max-microvolt = <1800000>; |
| 292 |
regulator-name = "cpvdd"; |
| 293 |
}; |
| 294 |
|
| 295 |
®_eldo3 { |
| 296 |
regulator-min-microvolt = <1500000>; |
| 297 |
regulator-max-microvolt = <1800000>; |
| 298 |
regulator-name = "dvdd-csi"; |
| 299 |
}; |
| 300 |
|
| 301 |
®_fldo1 { |
| 302 |
regulator-min-microvolt = <1200000>; |
| 303 |
regulator-max-microvolt = <1200000>; |
| 304 |
regulator-name = "vcc-1v2-hsic"; |
| 305 |
}; |
| 306 |
|
| 307 |
/* |
| 308 |
* The A64 chip cannot work without this regulator off, although |
| 309 |
* it seems to be only driving the AR100 core. |
| 310 |
* Maybe we don't still know well about CPUs domain. |
| 311 |
*/ |
| 312 |
®_fldo2 { |
| 313 |
regulator-always-on; |
| 314 |
regulator-min-microvolt = <1100000>; |
| 315 |
regulator-max-microvolt = <1100000>; |
| 316 |
regulator-name = "vdd-cpus"; |
| 317 |
}; |
| 318 |
|
| 319 |
®_rtc_ldo { |
| 320 |
regulator-name = "vcc-rtc"; |
| 321 |
}; |
| 322 |
|
| 323 |
&simplefb_hdmi { |
| 324 |
vcc-hdmi-supply = <®_dldo1>; |
| 325 |
}; |
| 326 |
|
| 327 |
&sound { |
| 328 |
status = "okay"; |
| 329 |
simple-audio-card,widgets = "Headphone", "Headphone Jack", |
| 330 |
"Microphone", "Microphone Jack", |
| 331 |
"Microphone", "Onboard Microphone"; |
| 332 |
simple-audio-card,routing = |
| 333 |
"Left DAC", "DACL", |
| 334 |
"Right DAC", "DACR", |
| 335 |
"ADCL", "Left ADC", |
| 336 |
"ADCR", "Right ADC", |
| 337 |
"Headphone Jack", "HP", |
| 338 |
"MIC2", "Microphone Jack", |
| 339 |
"Onboard Microphone", "MBIAS", |
| 340 |
"MIC1", "Onboard Microphone"; |
| 341 |
}; |
| 342 |
|
| 343 |
&spi0 { |
| 344 |
status = "okay"; |
| 345 |
|
| 346 |
flash@0 { |
| 347 |
compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; |
| 348 |
reg = <0>; |
| 349 |
spi-max-frequency = <80000000>; |
| 350 |
m25p,fast-read; |
| 351 |
status = "okay"; |
| 352 |
}; |
| 353 |
}; |
| 354 |
|
| 355 |
/* On debug connector */ |
| 356 |
&uart0 { |
| 357 |
pinctrl-names = "default"; |
| 358 |
pinctrl-0 = <&uart0_pb_pins>; |
| 359 |
status = "okay"; |
| 360 |
}; |
| 361 |
|
| 362 |
/* Bluetooth */ |
| 363 |
&uart1 { |
| 364 |
pinctrl-names = "default"; |
| 365 |
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; |
| 366 |
uart-has-rtscts; |
| 367 |
status = "okay"; |
| 368 |
|
| 369 |
bluetooth { |
| 370 |
compatible = "brcm,bcm43438-bt"; |
| 371 |
max-speed = <1500000>; |
| 372 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 373 |
clock-names = "lpo"; |
| 374 |
vbat-supply = <®_dldo2>; |
| 375 |
vddio-supply = <®_dldo4>; |
| 376 |
device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| 377 |
host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ |
| 378 |
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
| 379 |
}; |
| 380 |
}; |
| 381 |
|
| 382 |
/* On Pi-2 connector, RTS/CTS optional */ |
| 383 |
&uart2 { |
| 384 |
pinctrl-names = "default"; |
| 385 |
pinctrl-0 = <&uart2_pins>; |
| 386 |
status = "disabled"; |
| 387 |
}; |
| 388 |
|
| 389 |
/* On Pi-2 connector, RTS/CTS optional */ |
| 390 |
&uart3 { |
| 391 |
pinctrl-names = "default"; |
| 392 |
pinctrl-0 = <&uart3_pins>; |
| 393 |
status = "disabled"; |
| 394 |
}; |
| 395 |
|
| 396 |
/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */ |
| 397 |
&uart4 { |
| 398 |
pinctrl-names = "default"; |
| 399 |
pinctrl-0 = <&uart4_pins>; |
| 400 |
status = "disabled"; |
| 401 |
}; |
| 402 |
|
| 403 |
&usb_otg { |
| 404 |
dr_mode = "otg"; |
| 405 |
status = "okay"; |
| 406 |
}; |
| 407 |
|
| 408 |
&usbphy { |
| 409 |
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ |
| 410 |
usb0_vbus-supply = <®_drivevbus>; |
| 411 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 412 |
status = "okay"; |
| 413 |
}; |