| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
// Copyright (C) 2017 Jagan Teki <[email protected]> |
| 3 |
|
| 4 |
/dts-v1/; |
| 5 |
|
| 6 |
#include "sun50i-a64.dtsi" |
| 7 |
#include "sun50i-a64-cpu-opp.dtsi" |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "FriendlyARM NanoPi A64"; |
| 13 |
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
ethernet0 = &emac; |
| 17 |
serial0 = &uart0; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial0:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
hdmi-connector { |
| 25 |
compatible = "hdmi-connector"; |
| 26 |
type = "a"; |
| 27 |
|
| 28 |
port { |
| 29 |
hdmi_con_in: endpoint { |
| 30 |
remote-endpoint = <&hdmi_out_con>; |
| 31 |
}; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
leds { |
| 36 |
compatible = "gpio-leds"; |
| 37 |
|
| 38 |
led { |
| 39 |
label = "nanopi-a64:blue:status"; |
| 40 |
gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
wifi_pwrseq: pwrseq { |
| 45 |
compatible = "mmc-pwrseq-simple"; |
| 46 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 47 |
clock-names = "ext_clock"; |
| 48 |
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
&cpu0 { |
| 53 |
cpu-supply = <®_dcdc2>; |
| 54 |
}; |
| 55 |
|
| 56 |
&cpu1 { |
| 57 |
cpu-supply = <®_dcdc2>; |
| 58 |
}; |
| 59 |
|
| 60 |
&cpu2 { |
| 61 |
cpu-supply = <®_dcdc2>; |
| 62 |
}; |
| 63 |
|
| 64 |
&cpu3 { |
| 65 |
cpu-supply = <®_dcdc2>; |
| 66 |
}; |
| 67 |
|
| 68 |
&de { |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
&ehci0 { |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
&ehci1 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
&emac { |
| 81 |
pinctrl-names = "default"; |
| 82 |
pinctrl-0 = <&rgmii_pins>; |
| 83 |
phy-mode = "rgmii"; |
| 84 |
phy-handle = <&ext_rgmii_phy>; |
| 85 |
phy-supply = <®_dcdc1>; |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
&hdmi { |
| 90 |
hvcc-supply = <®_dldo1>; |
| 91 |
status = "okay"; |
| 92 |
}; |
| 93 |
|
| 94 |
&hdmi_out { |
| 95 |
hdmi_out_con: endpoint { |
| 96 |
remote-endpoint = <&hdmi_con_in>; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
/* i2c1 connected with gpio headers like pine64, bananapi */ |
| 101 |
&i2c1_pins { |
| 102 |
bias-pull-up; |
| 103 |
}; |
| 104 |
|
| 105 |
&mdio { |
| 106 |
ext_rgmii_phy: ethernet-phy@1 { |
| 107 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 108 |
reg = <7>; |
| 109 |
}; |
| 110 |
}; |
| 111 |
|
| 112 |
&mmc0 { |
| 113 |
pinctrl-names = "default"; |
| 114 |
pinctrl-0 = <&mmc0_pins>; |
| 115 |
vmmc-supply = <®_dcdc1>; |
| 116 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; |
| 117 |
disable-wp; |
| 118 |
bus-width = <4>; |
| 119 |
status = "okay"; |
| 120 |
}; |
| 121 |
|
| 122 |
&mmc1 { |
| 123 |
pinctrl-names = "default"; |
| 124 |
pinctrl-0 = <&mmc1_pins>; |
| 125 |
vmmc-supply = <®_dcdc1>; |
| 126 |
vqmmc-supply = <®_dldo4>; |
| 127 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 128 |
bus-width = <4>; |
| 129 |
non-removable; |
| 130 |
status = "okay"; |
| 131 |
|
| 132 |
rtl8189etv: wifi@1 { |
| 133 |
reg = <1>; |
| 134 |
interrupt-parent = <&r_pio>; |
| 135 |
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ |
| 136 |
interrupt-names = "host-wake"; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
&ohci0 { |
| 141 |
status = "okay"; |
| 142 |
}; |
| 143 |
|
| 144 |
&ohci1 { |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
&r_rsb { |
| 149 |
status = "okay"; |
| 150 |
|
| 151 |
axp803: pmic@3a3 { |
| 152 |
compatible = "x-powers,axp803"; |
| 153 |
reg = <0x3a3>; |
| 154 |
interrupt-parent = <&r_intc>; |
| 155 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
#include "axp803.dtsi" |
| 160 |
|
| 161 |
&ac_power_supply { |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
®_aldo2 { |
| 166 |
regulator-always-on; |
| 167 |
regulator-min-microvolt = <1800000>; |
| 168 |
regulator-max-microvolt = <3300000>; |
| 169 |
regulator-name = "vcc-pl"; |
| 170 |
}; |
| 171 |
|
| 172 |
®_aldo3 { |
| 173 |
regulator-always-on; |
| 174 |
regulator-min-microvolt = <3000000>; |
| 175 |
regulator-max-microvolt = <3000000>; |
| 176 |
regulator-name = "vcc-pll-avcc"; |
| 177 |
}; |
| 178 |
|
| 179 |
®_dcdc1 { |
| 180 |
regulator-always-on; |
| 181 |
regulator-min-microvolt = <3300000>; |
| 182 |
regulator-max-microvolt = <3300000>; |
| 183 |
regulator-name = "vcc-3v3"; |
| 184 |
}; |
| 185 |
|
| 186 |
®_dcdc2 { |
| 187 |
regulator-always-on; |
| 188 |
regulator-min-microvolt = <1040000>; |
| 189 |
regulator-max-microvolt = <1300000>; |
| 190 |
regulator-name = "vdd-cpux"; |
| 191 |
}; |
| 192 |
|
| 193 |
/* DCDC3 is polyphased with DCDC2 */ |
| 194 |
|
| 195 |
®_dcdc5 { |
| 196 |
regulator-always-on; |
| 197 |
regulator-min-microvolt = <1500000>; |
| 198 |
regulator-max-microvolt = <1500000>; |
| 199 |
regulator-name = "vcc-dram"; |
| 200 |
}; |
| 201 |
|
| 202 |
®_dcdc6 { |
| 203 |
regulator-always-on; |
| 204 |
regulator-min-microvolt = <1100000>; |
| 205 |
regulator-max-microvolt = <1100000>; |
| 206 |
regulator-name = "vdd-sys"; |
| 207 |
}; |
| 208 |
|
| 209 |
®_dldo1 { |
| 210 |
regulator-always-on; |
| 211 |
regulator-min-microvolt = <3300000>; |
| 212 |
regulator-max-microvolt = <3300000>; |
| 213 |
regulator-name = "vcc-hdmi-dsi"; |
| 214 |
}; |
| 215 |
|
| 216 |
®_dldo4 { |
| 217 |
regulator-always-on; |
| 218 |
regulator-min-microvolt = <3000000>; |
| 219 |
regulator-max-microvolt = <3000000>; |
| 220 |
regulator-name = "vcc-pg-wifi-io"; |
| 221 |
}; |
| 222 |
|
| 223 |
®_eldo1 { |
| 224 |
regulator-min-microvolt = <1800000>; |
| 225 |
regulator-max-microvolt = <1800000>; |
| 226 |
regulator-name = "cpvdd"; |
| 227 |
}; |
| 228 |
|
| 229 |
®_fldo1 { |
| 230 |
regulator-min-microvolt = <1200000>; |
| 231 |
regulator-max-microvolt = <1200000>; |
| 232 |
regulator-name = "vcc-1v2-hsic"; |
| 233 |
}; |
| 234 |
|
| 235 |
/* |
| 236 |
* The A64 chip cannot work without this regulator off, although |
| 237 |
* it seems to be only driving the AR100 core. |
| 238 |
* Maybe we don't still know well about CPUs domain. |
| 239 |
*/ |
| 240 |
®_fldo2 { |
| 241 |
regulator-always-on; |
| 242 |
regulator-min-microvolt = <1100000>; |
| 243 |
regulator-max-microvolt = <1100000>; |
| 244 |
regulator-name = "vdd-cpus"; |
| 245 |
}; |
| 246 |
|
| 247 |
®_rtc_ldo { |
| 248 |
regulator-name = "vcc-rtc"; |
| 249 |
}; |
| 250 |
|
| 251 |
&simplefb_hdmi { |
| 252 |
vcc-hdmi-supply = <®_dldo1>; |
| 253 |
}; |
| 254 |
|
| 255 |
&uart0 { |
| 256 |
pinctrl-names = "default"; |
| 257 |
pinctrl-0 = <&uart0_pb_pins>; |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&usbphy { |
| 262 |
status = "okay"; |
| 263 |
}; |