| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2017 Andreas Färber |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/clock/actions,s900-cmu.h> |
| 7 |
#include <dt-bindings/gpio/gpio.h> |
| 8 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 9 |
#include <dt-bindings/reset/actions,s900-reset.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "actions,s900"; |
| 13 |
interrupt-parent = <&gic>; |
| 14 |
#address-cells = <2>; |
| 15 |
#size-cells = <2>; |
| 16 |
|
| 17 |
cpus { |
| 18 |
#address-cells = <2>; |
| 19 |
#size-cells = <0>; |
| 20 |
|
| 21 |
cpu0: cpu@0 { |
| 22 |
device_type = "cpu"; |
| 23 |
compatible = "arm,cortex-a53"; |
| 24 |
reg = <0x0 0x0>; |
| 25 |
enable-method = "psci"; |
| 26 |
}; |
| 27 |
|
| 28 |
cpu1: cpu@1 { |
| 29 |
device_type = "cpu"; |
| 30 |
compatible = "arm,cortex-a53"; |
| 31 |
reg = <0x0 0x1>; |
| 32 |
enable-method = "psci"; |
| 33 |
}; |
| 34 |
|
| 35 |
cpu2: cpu@2 { |
| 36 |
device_type = "cpu"; |
| 37 |
compatible = "arm,cortex-a53"; |
| 38 |
reg = <0x0 0x2>; |
| 39 |
enable-method = "psci"; |
| 40 |
}; |
| 41 |
|
| 42 |
cpu3: cpu@3 { |
| 43 |
device_type = "cpu"; |
| 44 |
compatible = "arm,cortex-a53"; |
| 45 |
reg = <0x0 0x3>; |
| 46 |
enable-method = "psci"; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
reserved-memory { |
| 51 |
#address-cells = <2>; |
| 52 |
#size-cells = <2>; |
| 53 |
ranges; |
| 54 |
|
| 55 |
secmon@1f000000 { |
| 56 |
reg = <0x0 0x1f000000 0x0 0x1000000>; |
| 57 |
no-map; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
psci { |
| 62 |
compatible = "arm,psci-0.2"; |
| 63 |
method = "smc"; |
| 64 |
}; |
| 65 |
|
| 66 |
arm-pmu { |
| 67 |
compatible = "arm,cortex-a53-pmu"; |
| 68 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 69 |
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| 70 |
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| 71 |
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 72 |
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 73 |
}; |
| 74 |
|
| 75 |
timer { |
| 76 |
compatible = "arm,armv8-timer"; |
| 77 |
interrupts = <GIC_PPI 13 |
| 78 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 79 |
<GIC_PPI 14 |
| 80 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 81 |
<GIC_PPI 11 |
| 82 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 83 |
<GIC_PPI 10 |
| 84 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 85 |
}; |
| 86 |
|
| 87 |
hosc: hosc { |
| 88 |
compatible = "fixed-clock"; |
| 89 |
clock-frequency = <24000000>; |
| 90 |
#clock-cells = <0>; |
| 91 |
}; |
| 92 |
|
| 93 |
losc: losc { |
| 94 |
compatible = "fixed-clock"; |
| 95 |
clock-frequency = <32768>; |
| 96 |
#clock-cells = <0>; |
| 97 |
}; |
| 98 |
|
| 99 |
diff24M: diff24M { |
| 100 |
compatible = "fixed-clock"; |
| 101 |
clock-frequency = <24000000>; |
| 102 |
#clock-cells = <0>; |
| 103 |
}; |
| 104 |
|
| 105 |
soc { |
| 106 |
compatible = "simple-bus"; |
| 107 |
#address-cells = <2>; |
| 108 |
#size-cells = <2>; |
| 109 |
ranges; |
| 110 |
|
| 111 |
gic: interrupt-controller@e00f1000 { |
| 112 |
compatible = "arm,gic-400"; |
| 113 |
reg = <0x0 0xe00f1000 0x0 0x1000>, |
| 114 |
<0x0 0xe00f2000 0x0 0x2000>, |
| 115 |
<0x0 0xe00f4000 0x0 0x2000>, |
| 116 |
<0x0 0xe00f6000 0x0 0x2000>; |
| 117 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 118 |
interrupt-controller; |
| 119 |
#interrupt-cells = <3>; |
| 120 |
}; |
| 121 |
|
| 122 |
uart0: serial@e0120000 { |
| 123 |
compatible = "actions,s900-uart", "actions,owl-uart"; |
| 124 |
reg = <0x0 0xe0120000 0x0 0x2000>; |
| 125 |
clocks = <&cmu CLK_UART0>; |
| 126 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 127 |
status = "disabled"; |
| 128 |
}; |
| 129 |
|
| 130 |
uart1: serial@e0122000 { |
| 131 |
compatible = "actions,s900-uart", "actions,owl-uart"; |
| 132 |
reg = <0x0 0xe0122000 0x0 0x2000>; |
| 133 |
clocks = <&cmu CLK_UART1>; |
| 134 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 135 |
status = "disabled"; |
| 136 |
}; |
| 137 |
|
| 138 |
uart2: serial@e0124000 { |
| 139 |
compatible = "actions,s900-uart", "actions,owl-uart"; |
| 140 |
reg = <0x0 0xe0124000 0x0 0x2000>; |
| 141 |
clocks = <&cmu CLK_UART2>; |
| 142 |
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 143 |
status = "disabled"; |
| 144 |
}; |
| 145 |
|
| 146 |
uart3: serial@e0126000 { |
| 147 |
compatible = "actions,s900-uart", "actions,owl-uart"; |
| 148 |
reg = <0x0 0xe0126000 0x0 0x2000>; |
| 149 |
clocks = <&cmu CLK_UART3>; |
| 150 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 151 |
status = "disabled"; |
| 152 |
}; |
| 153 |
|
| 154 |
uart4: serial@e0128000 { |
| 155 |
compatible = "actions,s900-uart", "actions,owl-uart"; |
| 156 |
reg = <0x0 0xe0128000 0x0 0x2000>; |
| 157 |
clocks = <&cmu CLK_UART4>; |
| 158 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 159 |
status = "disabled"; |
| 160 |
}; |
| 161 |
|
| 162 |
uart5: serial@e012a000 { |
| 163 |
compatible = "actions,s900-uart", "actions,owl-uart"; |
| 164 |
reg = <0x0 0xe012a000 0x0 0x2000>; |
| 165 |
clocks = <&cmu CLK_UART5>; |
| 166 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 167 |
status = "disabled"; |
| 168 |
}; |
| 169 |
|
| 170 |
uart6: serial@e012c000 { |
| 171 |
compatible = "actions,s900-uart", "actions,owl-uart"; |
| 172 |
reg = <0x0 0xe012c000 0x0 0x2000>; |
| 173 |
clocks = <&cmu CLK_UART6>; |
| 174 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 175 |
status = "disabled"; |
| 176 |
}; |
| 177 |
|
| 178 |
sps: power-controller@e012e000 { |
| 179 |
compatible = "actions,s900-sps"; |
| 180 |
reg = <0x0 0xe012e000 0x0 0x2000>; |
| 181 |
#power-domain-cells = <1>; |
| 182 |
}; |
| 183 |
|
| 184 |
cmu: clock-controller@e0160000 { |
| 185 |
compatible = "actions,s900-cmu"; |
| 186 |
reg = <0x0 0xe0160000 0x0 0x1000>; |
| 187 |
clocks = <&hosc>, <&losc>; |
| 188 |
#clock-cells = <1>; |
| 189 |
#reset-cells = <1>; |
| 190 |
}; |
| 191 |
|
| 192 |
i2c0: i2c@e0170000 { |
| 193 |
compatible = "actions,s900-i2c"; |
| 194 |
reg = <0 0xe0170000 0 0x1000>; |
| 195 |
clocks = <&cmu CLK_I2C0>; |
| 196 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 197 |
#address-cells = <1>; |
| 198 |
#size-cells = <0>; |
| 199 |
status = "disabled"; |
| 200 |
}; |
| 201 |
|
| 202 |
i2c1: i2c@e0172000 { |
| 203 |
compatible = "actions,s900-i2c"; |
| 204 |
reg = <0 0xe0172000 0 0x1000>; |
| 205 |
clocks = <&cmu CLK_I2C1>; |
| 206 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 207 |
#address-cells = <1>; |
| 208 |
#size-cells = <0>; |
| 209 |
status = "disabled"; |
| 210 |
}; |
| 211 |
|
| 212 |
i2c2: i2c@e0174000 { |
| 213 |
compatible = "actions,s900-i2c"; |
| 214 |
reg = <0 0xe0174000 0 0x1000>; |
| 215 |
clocks = <&cmu CLK_I2C2>; |
| 216 |
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 217 |
#address-cells = <1>; |
| 218 |
#size-cells = <0>; |
| 219 |
status = "disabled"; |
| 220 |
}; |
| 221 |
|
| 222 |
i2c3: i2c@e0176000 { |
| 223 |
compatible = "actions,s900-i2c"; |
| 224 |
reg = <0 0xe0176000 0 0x1000>; |
| 225 |
clocks = <&cmu CLK_I2C3>; |
| 226 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 227 |
#address-cells = <1>; |
| 228 |
#size-cells = <0>; |
| 229 |
status = "disabled"; |
| 230 |
}; |
| 231 |
|
| 232 |
i2c4: i2c@e0178000 { |
| 233 |
compatible = "actions,s900-i2c"; |
| 234 |
reg = <0 0xe0178000 0 0x1000>; |
| 235 |
clocks = <&cmu CLK_I2C4>; |
| 236 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 237 |
#address-cells = <1>; |
| 238 |
#size-cells = <0>; |
| 239 |
status = "disabled"; |
| 240 |
}; |
| 241 |
|
| 242 |
i2c5: i2c@e017a000 { |
| 243 |
compatible = "actions,s900-i2c"; |
| 244 |
reg = <0 0xe017a000 0 0x1000>; |
| 245 |
clocks = <&cmu CLK_I2C5>; |
| 246 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 247 |
#address-cells = <1>; |
| 248 |
#size-cells = <0>; |
| 249 |
status = "disabled"; |
| 250 |
}; |
| 251 |
|
| 252 |
pinctrl: pinctrl@e01b0000 { |
| 253 |
compatible = "actions,s900-pinctrl"; |
| 254 |
reg = <0x0 0xe01b0000 0x0 0x1000>; |
| 255 |
clocks = <&cmu CLK_GPIO>; |
| 256 |
gpio-controller; |
| 257 |
gpio-ranges = <&pinctrl 0 0 146>; |
| 258 |
#gpio-cells = <2>; |
| 259 |
interrupt-controller; |
| 260 |
#interrupt-cells = <2>; |
| 261 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, |
| 262 |
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, |
| 263 |
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, |
| 264 |
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, |
| 265 |
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| 266 |
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 267 |
}; |
| 268 |
|
| 269 |
timer: timer@e0228000 { |
| 270 |
compatible = "actions,s900-timer"; |
| 271 |
reg = <0x0 0xe0228000 0x0 0x8000>; |
| 272 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 273 |
interrupt-names = "timer1"; |
| 274 |
}; |
| 275 |
|
| 276 |
dma: dma-controller@e0260000 { |
| 277 |
compatible = "actions,s900-dma"; |
| 278 |
reg = <0x0 0xe0260000 0x0 0x1000>; |
| 279 |
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| 280 |
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 281 |
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 282 |
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 283 |
#dma-cells = <1>; |
| 284 |
dma-channels = <12>; |
| 285 |
dma-requests = <46>; |
| 286 |
clocks = <&cmu CLK_DMAC>; |
| 287 |
}; |
| 288 |
|
| 289 |
mmc0: mmc@e0330000 { |
| 290 |
compatible = "actions,owl-mmc"; |
| 291 |
reg = <0x0 0xe0330000 0x0 0x4000>; |
| 292 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 293 |
clocks = <&cmu CLK_SD0>; |
| 294 |
resets = <&cmu RESET_SD0>; |
| 295 |
dmas = <&dma 2>; |
| 296 |
dma-names = "mmc"; |
| 297 |
status = "disabled"; |
| 298 |
}; |
| 299 |
|
| 300 |
mmc1: mmc@e0334000 { |
| 301 |
compatible = "actions,owl-mmc"; |
| 302 |
reg = <0x0 0xe0334000 0x0 0x4000>; |
| 303 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 304 |
clocks = <&cmu CLK_SD1>; |
| 305 |
resets = <&cmu RESET_SD1>; |
| 306 |
dmas = <&dma 3>; |
| 307 |
dma-names = "mmc"; |
| 308 |
status = "disabled"; |
| 309 |
}; |
| 310 |
|
| 311 |
mmc2: mmc@e0338000 { |
| 312 |
compatible = "actions,owl-mmc"; |
| 313 |
reg = <0x0 0xe0338000 0x0 0x4000>; |
| 314 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 315 |
clocks = <&cmu CLK_SD2>; |
| 316 |
resets = <&cmu RESET_SD2>; |
| 317 |
dmas = <&dma 4>; |
| 318 |
dma-names = "mmc"; |
| 319 |
status = "disabled"; |
| 320 |
}; |
| 321 |
|
| 322 |
mmc3: mmc@e033c000 { |
| 323 |
compatible = "actions,owl-mmc"; |
| 324 |
reg = <0x0 0xe033c000 0x0 0x4000>; |
| 325 |
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 326 |
clocks = <&cmu CLK_SD3>; |
| 327 |
resets = <&cmu RESET_SD3>; |
| 328 |
dmas = <&dma 46>; |
| 329 |
dma-names = "mmc"; |
| 330 |
status = "disabled"; |
| 331 |
}; |
| 332 |
}; |
| 333 |
}; |