| 1 |
/* SPDX-License-Identifier: GPL-2.0-only */ |
| 2 |
/* |
| 3 |
* MIPI DSI Bus |
| 4 |
* |
| 5 |
* Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. |
| 6 |
* Andrzej Hajda <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#ifndef __DRM_MIPI_DSI_H__ |
| 10 |
#define __DRM_MIPI_DSI_H__ |
| 11 |
|
| 12 |
#include <linux/device.h> |
| 13 |
#include <linux/delay.h> |
| 14 |
|
| 15 |
struct mipi_dsi_host; |
| 16 |
struct mipi_dsi_device; |
| 17 |
struct drm_dsc_picture_parameter_set; |
| 18 |
|
| 19 |
/* request ACK from peripheral */ |
| 20 |
#define MIPI_DSI_MSG_REQ_ACK BIT(0) |
| 21 |
/* use Low Power Mode to transmit message */ |
| 22 |
#define MIPI_DSI_MSG_USE_LPM BIT(1) |
| 23 |
|
| 24 |
/** |
| 25 |
* struct mipi_dsi_msg - read/write DSI buffer |
| 26 |
* @channel: virtual channel id |
| 27 |
* @type: payload data type |
| 28 |
* @flags: flags controlling this message transmission |
| 29 |
* @tx_len: length of @tx_buf |
| 30 |
* @tx_buf: data to be written |
| 31 |
* @rx_len: length of @rx_buf |
| 32 |
* @rx_buf: data to be read, or NULL |
| 33 |
*/ |
| 34 |
struct mipi_dsi_msg { |
| 35 |
u8 channel; |
| 36 |
u8 type; |
| 37 |
u16 flags; |
| 38 |
|
| 39 |
size_t tx_len; |
| 40 |
const void *tx_buf; |
| 41 |
|
| 42 |
size_t rx_len; |
| 43 |
void *rx_buf; |
| 44 |
}; |
| 45 |
|
| 46 |
bool mipi_dsi_packet_format_is_short(u8 type); |
| 47 |
bool mipi_dsi_packet_format_is_long(u8 type); |
| 48 |
|
| 49 |
/** |
| 50 |
* struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format |
| 51 |
* @size: size (in bytes) of the packet |
| 52 |
* @header: the four bytes that make up the header (Data ID, Word Count or |
| 53 |
* Packet Data, and ECC) |
| 54 |
* @payload_length: number of bytes in the payload |
| 55 |
* @payload: a pointer to a buffer containing the payload, if any |
| 56 |
*/ |
| 57 |
struct mipi_dsi_packet { |
| 58 |
size_t size; |
| 59 |
u8 header[4]; |
| 60 |
size_t payload_length; |
| 61 |
const u8 *payload; |
| 62 |
}; |
| 63 |
|
| 64 |
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, |
| 65 |
const struct mipi_dsi_msg *msg); |
| 66 |
|
| 67 |
/** |
| 68 |
* struct mipi_dsi_host_ops - DSI bus operations |
| 69 |
* @attach: attach DSI device to DSI host |
| 70 |
* @detach: detach DSI device from DSI host |
| 71 |
* @transfer: transmit a DSI packet |
| 72 |
* |
| 73 |
* DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg |
| 74 |
* structures. This structure contains information about the type of packet |
| 75 |
* being transmitted as well as the transmit and receive buffers. When an |
| 76 |
* error is encountered during transmission, this function will return a |
| 77 |
* negative error code. On success it shall return the number of bytes |
| 78 |
* transmitted for write packets or the number of bytes received for read |
| 79 |
* packets. |
| 80 |
* |
| 81 |
* Note that typically DSI packet transmission is atomic, so the .transfer() |
| 82 |
* function will seldomly return anything other than the number of bytes |
| 83 |
* contained in the transmit buffer on success. |
| 84 |
* |
| 85 |
* Also note that those callbacks can be called no matter the state the |
| 86 |
* host is in. Drivers that need the underlying device to be powered to |
| 87 |
* perform these operations will first need to make sure it's been |
| 88 |
* properly enabled. |
| 89 |
*/ |
| 90 |
struct mipi_dsi_host_ops { |
| 91 |
int (*attach)(struct mipi_dsi_host *host, |
| 92 |
struct mipi_dsi_device *dsi); |
| 93 |
int (*detach)(struct mipi_dsi_host *host, |
| 94 |
struct mipi_dsi_device *dsi); |
| 95 |
ssize_t (*transfer)(struct mipi_dsi_host *host, |
| 96 |
const struct mipi_dsi_msg *msg); |
| 97 |
}; |
| 98 |
|
| 99 |
/** |
| 100 |
* struct mipi_dsi_host - DSI host device |
| 101 |
* @dev: driver model device node for this DSI host |
| 102 |
* @ops: DSI host operations |
| 103 |
* @list: list management |
| 104 |
*/ |
| 105 |
struct mipi_dsi_host { |
| 106 |
struct device *dev; |
| 107 |
const struct mipi_dsi_host_ops *ops; |
| 108 |
struct list_head list; |
| 109 |
}; |
| 110 |
|
| 111 |
int mipi_dsi_host_register(struct mipi_dsi_host *host); |
| 112 |
void mipi_dsi_host_unregister(struct mipi_dsi_host *host); |
| 113 |
struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node); |
| 114 |
|
| 115 |
/* DSI mode flags */ |
| 116 |
|
| 117 |
/* video mode */ |
| 118 |
#define MIPI_DSI_MODE_VIDEO BIT(0) |
| 119 |
/* video burst mode */ |
| 120 |
#define MIPI_DSI_MODE_VIDEO_BURST BIT(1) |
| 121 |
/* video pulse mode */ |
| 122 |
#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) |
| 123 |
/* enable auto vertical count mode */ |
| 124 |
#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) |
| 125 |
/* enable hsync-end packets in vsync-pulse and v-porch area */ |
| 126 |
#define MIPI_DSI_MODE_VIDEO_HSE BIT(4) |
| 127 |
/* disable hfront-porch area */ |
| 128 |
#define MIPI_DSI_MODE_VIDEO_NO_HFP BIT(5) |
| 129 |
/* disable hback-porch area */ |
| 130 |
#define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6) |
| 131 |
/* disable hsync-active area */ |
| 132 |
#define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7) |
| 133 |
/* disable EoT packets in HS mode */ |
| 134 |
#define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9) |
| 135 |
/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ |
| 136 |
#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) |
| 137 |
/* transmit data in low power */ |
| 138 |
#define MIPI_DSI_MODE_LPM BIT(11) |
| 139 |
/* transmit data ending at the same time for all lanes within one hsync */ |
| 140 |
#define MIPI_DSI_HS_PKT_END_ALIGNED BIT(12) |
| 141 |
|
| 142 |
enum mipi_dsi_pixel_format { |
| 143 |
MIPI_DSI_FMT_RGB888, |
| 144 |
MIPI_DSI_FMT_RGB666, |
| 145 |
MIPI_DSI_FMT_RGB666_PACKED, |
| 146 |
MIPI_DSI_FMT_RGB565, |
| 147 |
}; |
| 148 |
|
| 149 |
#define DSI_DEV_NAME_SIZE 20 |
| 150 |
|
| 151 |
/** |
| 152 |
* struct mipi_dsi_device_info - template for creating a mipi_dsi_device |
| 153 |
* @type: DSI peripheral chip type |
| 154 |
* @channel: DSI virtual channel assigned to peripheral |
| 155 |
* @node: pointer to OF device node or NULL |
| 156 |
* |
| 157 |
* This is populated and passed to mipi_dsi_device_new to create a new |
| 158 |
* DSI device |
| 159 |
*/ |
| 160 |
struct mipi_dsi_device_info { |
| 161 |
char type[DSI_DEV_NAME_SIZE]; |
| 162 |
u32 channel; |
| 163 |
struct device_node *node; |
| 164 |
}; |
| 165 |
|
| 166 |
/** |
| 167 |
* struct mipi_dsi_device - DSI peripheral device |
| 168 |
* @host: DSI host for this peripheral |
| 169 |
* @dev: driver model device node for this peripheral |
| 170 |
* @attached: the DSI device has been successfully attached |
| 171 |
* @name: DSI peripheral chip type |
| 172 |
* @channel: virtual channel assigned to the peripheral |
| 173 |
* @format: pixel format for video mode |
| 174 |
* @lanes: number of active data lanes |
| 175 |
* @mode_flags: DSI operation mode related flags |
| 176 |
* @hs_rate: maximum lane frequency for high speed mode in hertz, this should |
| 177 |
* be set to the real limits of the hardware, zero is only accepted for |
| 178 |
* legacy drivers |
| 179 |
* @lp_rate: maximum lane frequency for low power mode in hertz, this should |
| 180 |
* be set to the real limits of the hardware, zero is only accepted for |
| 181 |
* legacy drivers |
| 182 |
* @dsc: panel/bridge DSC pps payload to be sent |
| 183 |
*/ |
| 184 |
struct mipi_dsi_device { |
| 185 |
struct mipi_dsi_host *host; |
| 186 |
struct device dev; |
| 187 |
bool attached; |
| 188 |
|
| 189 |
char name[DSI_DEV_NAME_SIZE]; |
| 190 |
unsigned int channel; |
| 191 |
unsigned int lanes; |
| 192 |
enum mipi_dsi_pixel_format format; |
| 193 |
unsigned long mode_flags; |
| 194 |
unsigned long hs_rate; |
| 195 |
unsigned long lp_rate; |
| 196 |
struct drm_dsc_config *dsc; |
| 197 |
}; |
| 198 |
|
| 199 |
/** |
| 200 |
* struct mipi_dsi_multi_context - Context to call multiple MIPI DSI funcs in a row |
| 201 |
*/ |
| 202 |
struct mipi_dsi_multi_context { |
| 203 |
/** |
| 204 |
* @dsi: Pointer to the MIPI DSI device |
| 205 |
*/ |
| 206 |
struct mipi_dsi_device *dsi; |
| 207 |
|
| 208 |
/** |
| 209 |
* @accum_err: Storage for the accumulated error over the multiple calls |
| 210 |
* |
| 211 |
* Init to 0. If a function encounters an error then the error code |
| 212 |
* will be stored here. If you call a function and this points to a |
| 213 |
* non-zero value then the function will be a noop. This allows calling |
| 214 |
* a function many times in a row and just checking the error at the |
| 215 |
* end to see if any of them failed. |
| 216 |
*/ |
| 217 |
int accum_err; |
| 218 |
}; |
| 219 |
|
| 220 |
#define MIPI_DSI_MODULE_PREFIX "mipi-dsi:" |
| 221 |
|
| 222 |
#define to_mipi_dsi_device(__dev) container_of_const(__dev, struct mipi_dsi_device, dev) |
| 223 |
|
| 224 |
extern const struct bus_type mipi_dsi_bus_type; |
| 225 |
#define dev_is_mipi_dsi(dev) ((dev)->bus == &mipi_dsi_bus_type) |
| 226 |
|
| 227 |
/** |
| 228 |
* mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any |
| 229 |
* given pixel format defined by the MIPI DSI |
| 230 |
* specification |
| 231 |
* @fmt: MIPI DSI pixel format |
| 232 |
* |
| 233 |
* Returns: The number of bits per pixel of the given pixel format. |
| 234 |
*/ |
| 235 |
static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) |
| 236 |
{ |
| 237 |
switch (fmt) { |
| 238 |
case MIPI_DSI_FMT_RGB888: |
| 239 |
case MIPI_DSI_FMT_RGB666: |
| 240 |
return 24; |
| 241 |
|
| 242 |
case MIPI_DSI_FMT_RGB666_PACKED: |
| 243 |
return 18; |
| 244 |
|
| 245 |
case MIPI_DSI_FMT_RGB565: |
| 246 |
return 16; |
| 247 |
} |
| 248 |
|
| 249 |
return -EINVAL; |
| 250 |
} |
| 251 |
|
| 252 |
enum mipi_dsi_compression_algo { |
| 253 |
MIPI_DSI_COMPRESSION_DSC = 0, |
| 254 |
MIPI_DSI_COMPRESSION_VENDOR = 3, |
| 255 |
/* other two values are reserved, DSI 1.3 */ |
| 256 |
}; |
| 257 |
|
| 258 |
struct mipi_dsi_device * |
| 259 |
mipi_dsi_device_register_full(struct mipi_dsi_host *host, |
| 260 |
const struct mipi_dsi_device_info *info); |
| 261 |
void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi); |
| 262 |
struct mipi_dsi_device * |
| 263 |
devm_mipi_dsi_device_register_full(struct device *dev, struct mipi_dsi_host *host, |
| 264 |
const struct mipi_dsi_device_info *info); |
| 265 |
struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np); |
| 266 |
int mipi_dsi_attach(struct mipi_dsi_device *dsi); |
| 267 |
int mipi_dsi_detach(struct mipi_dsi_device *dsi); |
| 268 |
int devm_mipi_dsi_attach(struct device *dev, struct mipi_dsi_device *dsi); |
| 269 |
int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); |
| 270 |
int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); |
| 271 |
int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, |
| 272 |
u16 value); |
| 273 |
int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable); |
| 274 |
int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable, |
| 275 |
enum mipi_dsi_compression_algo algo, |
| 276 |
unsigned int pps_selector); |
| 277 |
int mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi, |
| 278 |
const struct drm_dsc_picture_parameter_set *pps); |
| 279 |
|
| 280 |
void mipi_dsi_compression_mode_ext_multi(struct mipi_dsi_multi_context *ctx, |
| 281 |
bool enable, |
| 282 |
enum mipi_dsi_compression_algo algo, |
| 283 |
unsigned int pps_selector); |
| 284 |
void mipi_dsi_compression_mode_multi(struct mipi_dsi_multi_context *ctx, |
| 285 |
bool enable); |
| 286 |
void mipi_dsi_picture_parameter_set_multi(struct mipi_dsi_multi_context *ctx, |
| 287 |
const struct drm_dsc_picture_parameter_set *pps); |
| 288 |
|
| 289 |
ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, |
| 290 |
size_t size); |
| 291 |
void mipi_dsi_generic_write_multi(struct mipi_dsi_multi_context *ctx, |
| 292 |
const void *payload, size_t size); |
| 293 |
void mipi_dsi_dual_generic_write_multi(struct mipi_dsi_multi_context *ctx, |
| 294 |
struct mipi_dsi_device *dsi1, |
| 295 |
struct mipi_dsi_device *dsi2, |
| 296 |
const void *payload, size_t size); |
| 297 |
ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, |
| 298 |
size_t num_params, void *data, size_t size); |
| 299 |
u32 drm_mipi_dsi_get_input_bus_fmt(enum mipi_dsi_pixel_format dsi_format); |
| 300 |
|
| 301 |
#define mipi_dsi_msleep(ctx, delay) \ |
| 302 |
do { \ |
| 303 |
if (!(ctx)->accum_err) \ |
| 304 |
msleep(delay); \ |
| 305 |
} while (0) |
| 306 |
|
| 307 |
#define mipi_dsi_usleep_range(ctx, min, max) \ |
| 308 |
do { \ |
| 309 |
if (!(ctx)->accum_err) \ |
| 310 |
usleep_range(min, max); \ |
| 311 |
} while (0) |
| 312 |
|
| 313 |
/** |
| 314 |
* enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode |
| 315 |
* @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking |
| 316 |
* information only |
| 317 |
* @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both |
| 318 |
* V-Blanking and H-Blanking information |
| 319 |
*/ |
| 320 |
enum mipi_dsi_dcs_tear_mode { |
| 321 |
MIPI_DSI_DCS_TEAR_MODE_VBLANK, |
| 322 |
MIPI_DSI_DCS_TEAR_MODE_VHBLANK, |
| 323 |
}; |
| 324 |
|
| 325 |
#define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2) |
| 326 |
#define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3) |
| 327 |
#define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4) |
| 328 |
#define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5) |
| 329 |
#define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6) |
| 330 |
|
| 331 |
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, |
| 332 |
const void *data, size_t len); |
| 333 |
int mipi_dsi_dcs_write_buffer_chatty(struct mipi_dsi_device *dsi, |
| 334 |
const void *data, size_t len); |
| 335 |
void mipi_dsi_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx, |
| 336 |
const void *data, size_t len); |
| 337 |
void mipi_dsi_dual_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx, |
| 338 |
struct mipi_dsi_device *dsi1, |
| 339 |
struct mipi_dsi_device *dsi2, |
| 340 |
const void *data, size_t len); |
| 341 |
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, |
| 342 |
const void *data, size_t len); |
| 343 |
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, |
| 344 |
size_t len); |
| 345 |
void mipi_dsi_dcs_read_multi(struct mipi_dsi_multi_context *ctx, u8 cmd, |
| 346 |
void *data, size_t len); |
| 347 |
int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); |
| 348 |
int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); |
| 349 |
int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); |
| 350 |
int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); |
| 351 |
int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); |
| 352 |
int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); |
| 353 |
int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); |
| 354 |
int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); |
| 355 |
int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, |
| 356 |
u16 end); |
| 357 |
int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, |
| 358 |
u16 end); |
| 359 |
int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, |
| 360 |
enum mipi_dsi_dcs_tear_mode mode); |
| 361 |
int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); |
| 362 |
int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline); |
| 363 |
int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, |
| 364 |
u16 brightness); |
| 365 |
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, |
| 366 |
u16 *brightness); |
| 367 |
int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi, |
| 368 |
u16 brightness); |
| 369 |
int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi, |
| 370 |
u16 *brightness); |
| 371 |
|
| 372 |
void mipi_dsi_dcs_nop_multi(struct mipi_dsi_multi_context *ctx); |
| 373 |
void mipi_dsi_dcs_enter_sleep_mode_multi(struct mipi_dsi_multi_context *ctx); |
| 374 |
void mipi_dsi_dcs_exit_sleep_mode_multi(struct mipi_dsi_multi_context *ctx); |
| 375 |
void mipi_dsi_dcs_set_display_off_multi(struct mipi_dsi_multi_context *ctx); |
| 376 |
void mipi_dsi_dcs_set_display_on_multi(struct mipi_dsi_multi_context *ctx); |
| 377 |
void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx, |
| 378 |
enum mipi_dsi_dcs_tear_mode mode); |
| 379 |
void mipi_dsi_turn_on_peripheral_multi(struct mipi_dsi_multi_context *ctx); |
| 380 |
void mipi_dsi_dcs_soft_reset_multi(struct mipi_dsi_multi_context *ctx); |
| 381 |
void mipi_dsi_dcs_set_display_brightness_multi(struct mipi_dsi_multi_context *ctx, |
| 382 |
u16 brightness); |
| 383 |
void mipi_dsi_dcs_set_pixel_format_multi(struct mipi_dsi_multi_context *ctx, |
| 384 |
u8 format); |
| 385 |
void mipi_dsi_dcs_set_column_address_multi(struct mipi_dsi_multi_context *ctx, |
| 386 |
u16 start, u16 end); |
| 387 |
void mipi_dsi_dcs_set_page_address_multi(struct mipi_dsi_multi_context *ctx, |
| 388 |
u16 start, u16 end); |
| 389 |
void mipi_dsi_dcs_set_tear_scanline_multi(struct mipi_dsi_multi_context *ctx, |
| 390 |
u16 scanline); |
| 391 |
void mipi_dsi_dcs_set_tear_off_multi(struct mipi_dsi_multi_context *ctx); |
| 392 |
|
| 393 |
/** |
| 394 |
* mipi_dsi_generic_write_seq_multi - transmit data using a generic write packet |
| 395 |
* |
| 396 |
* This macro will print errors for you and error handling is optimized for |
| 397 |
* callers that call this multiple times in a row. |
| 398 |
* |
| 399 |
* @ctx: Context for multiple DSI transactions |
| 400 |
* @seq: buffer containing the payload |
| 401 |
*/ |
| 402 |
#define mipi_dsi_generic_write_seq_multi(ctx, seq...) \ |
| 403 |
do { \ |
| 404 |
static const u8 d[] = { seq }; \ |
| 405 |
mipi_dsi_generic_write_multi(ctx, d, ARRAY_SIZE(d)); \ |
| 406 |
} while (0) |
| 407 |
|
| 408 |
/** |
| 409 |
* mipi_dsi_generic_write_var_seq_multi - transmit non-constant data using a |
| 410 |
* generic write packet |
| 411 |
* |
| 412 |
* This macro will print errors for you and error handling is optimized for |
| 413 |
* callers that call this multiple times in a row. |
| 414 |
* |
| 415 |
* @ctx: Context for multiple DSI transactions |
| 416 |
* @seq: buffer containing the payload |
| 417 |
*/ |
| 418 |
#define mipi_dsi_generic_write_var_seq_multi(ctx, seq...) \ |
| 419 |
do { \ |
| 420 |
const u8 d[] = { seq }; \ |
| 421 |
mipi_dsi_generic_write_multi(ctx, d, ARRAY_SIZE(d)); \ |
| 422 |
} while (0) |
| 423 |
|
| 424 |
/** |
| 425 |
* mipi_dsi_dcs_write_seq_multi - transmit a DCS command with payload |
| 426 |
* |
| 427 |
* This macro will print errors for you and error handling is optimized for |
| 428 |
* callers that call this multiple times in a row. |
| 429 |
* |
| 430 |
* @ctx: Context for multiple DSI transactions |
| 431 |
* @cmd: Command |
| 432 |
* @seq: buffer containing data to be transmitted |
| 433 |
*/ |
| 434 |
#define mipi_dsi_dcs_write_seq_multi(ctx, cmd, seq...) \ |
| 435 |
do { \ |
| 436 |
static const u8 d[] = { cmd, seq }; \ |
| 437 |
mipi_dsi_dcs_write_buffer_multi(ctx, d, ARRAY_SIZE(d)); \ |
| 438 |
} while (0) |
| 439 |
|
| 440 |
/** |
| 441 |
* mipi_dsi_dcs_write_var_seq_multi - transmit a DCS command with non-constant |
| 442 |
* payload |
| 443 |
* |
| 444 |
* This macro will print errors for you and error handling is optimized for |
| 445 |
* callers that call this multiple times in a row. |
| 446 |
* |
| 447 |
* @ctx: Context for multiple DSI transactions |
| 448 |
* @cmd: Command |
| 449 |
* @seq: buffer containing data to be transmitted |
| 450 |
*/ |
| 451 |
#define mipi_dsi_dcs_write_var_seq_multi(ctx, cmd, seq...) \ |
| 452 |
do { \ |
| 453 |
const u8 d[] = { cmd, seq }; \ |
| 454 |
mipi_dsi_dcs_write_buffer_multi(ctx, d, ARRAY_SIZE(d)); \ |
| 455 |
} while (0) |
| 456 |
|
| 457 |
/** |
| 458 |
* mipi_dsi_dual - send the same MIPI DSI command to two interfaces |
| 459 |
* |
| 460 |
* This macro will send the specified MIPI DSI command twice, once per each of |
| 461 |
* the two interfaces supplied. This is useful for reducing duplication of code |
| 462 |
* in panel drivers which use two parallel serial interfaces. |
| 463 |
* |
| 464 |
* Note that the _func parameter cannot accept a macro such as |
| 465 |
* mipi_dsi_generic_write_multi() or mipi_dsi_dcs_write_buffer_multi(). See |
| 466 |
* mipi_dsi_dual_generic_write_multi() and |
| 467 |
* mipi_dsi_dual_dcs_write_buffer_multi() instead. |
| 468 |
* |
| 469 |
* WARNING: This macro reuses the _func argument and the optional trailing |
| 470 |
* arguments twice each, which may cause unintended side effects. For example, |
| 471 |
* adding the postfix increment ++ operator to one of the arguments to be |
| 472 |
* passed to _func will cause the variable to be incremented twice instead of |
| 473 |
* once and the variable will be its original value + 1 when sent to _dsi2. |
| 474 |
* |
| 475 |
* @_func: MIPI DSI function to pass context and arguments into |
| 476 |
* @_ctx: Context for multiple DSI transactions |
| 477 |
* @_dsi1: First DSI interface to act as recipient of the MIPI DSI command |
| 478 |
* @_dsi2: Second DSI interface to act as recipient of the MIPI DSI command |
| 479 |
* @...: Arguments to pass to MIPI DSI function or macro |
| 480 |
*/ |
| 481 |
|
| 482 |
#define mipi_dsi_dual(_func, _ctx, _dsi1, _dsi2, ...) \ |
| 483 |
do { \ |
| 484 |
struct mipi_dsi_multi_context *_ctxcpy = (_ctx); \ |
| 485 |
_ctxcpy->dsi = (_dsi1); \ |
| 486 |
(_func)(_ctxcpy, ##__VA_ARGS__); \ |
| 487 |
_ctxcpy->dsi = (_dsi2); \ |
| 488 |
(_func)(_ctxcpy, ##__VA_ARGS__); \ |
| 489 |
} while (0) |
| 490 |
|
| 491 |
/** |
| 492 |
* mipi_dsi_dual_generic_write_seq_multi - transmit data using a generic write |
| 493 |
* packet to two dsi interfaces, one after the other |
| 494 |
* |
| 495 |
* This macro will send the specified generic packet twice, once per each of |
| 496 |
* the two interfaces supplied. This is useful for reducing duplication of code |
| 497 |
* in panel drivers which use two parallel serial interfaces. |
| 498 |
* |
| 499 |
* Note that if an error occurs while transmitting the packet to the first DSI |
| 500 |
* interface, the packet will not be sent to the second DSI interface. |
| 501 |
* |
| 502 |
* This macro will print errors for you and error handling is optimized for |
| 503 |
* callers that call this multiple times in a row. |
| 504 |
* |
| 505 |
* @_ctx: Context for multiple DSI transactions |
| 506 |
* @_dsi1: First DSI interface to act as recipient of packet |
| 507 |
* @_dsi2: Second DSI interface to act as recipient of packet |
| 508 |
* @_seq: buffer containing the payload |
| 509 |
*/ |
| 510 |
#define mipi_dsi_dual_generic_write_seq_multi(_ctx, _dsi1, _dsi2, _seq...) \ |
| 511 |
do { \ |
| 512 |
static const u8 d[] = { _seq }; \ |
| 513 |
mipi_dsi_dual_generic_write_multi(_ctx, _dsi1, _dsi2, d, \ |
| 514 |
ARRAY_SIZE(d)); \ |
| 515 |
} while (0) |
| 516 |
|
| 517 |
/** |
| 518 |
* mipi_dsi_dual_dcs_write_seq_multi - transmit a DCS command with payload to |
| 519 |
* two dsi interfaces, one after the other |
| 520 |
* |
| 521 |
* This macro will send the specified DCS command with payload twice, once per |
| 522 |
* each of the two interfaces supplied. This is useful for reducing duplication |
| 523 |
* of code in panel drivers which use two parallel serial interfaces. |
| 524 |
* |
| 525 |
* Note that if an error occurs while transmitting the payload to the first DSI |
| 526 |
* interface, the payload will not be sent to the second DSI interface. |
| 527 |
* |
| 528 |
* This macro will print errors for you and error handling is optimized for |
| 529 |
* callers that call this multiple times in a row. |
| 530 |
* |
| 531 |
* @_ctx: Context for multiple DSI transactions |
| 532 |
* @_dsi1: First DSI interface to act as recipient of packet |
| 533 |
* @_dsi2: Second DSI interface to act as recipient of packet |
| 534 |
* @_cmd: Command |
| 535 |
* @_seq: buffer containing the payload |
| 536 |
*/ |
| 537 |
#define mipi_dsi_dual_dcs_write_seq_multi(_ctx, _dsi1, _dsi2, _cmd, _seq...) \ |
| 538 |
do { \ |
| 539 |
static const u8 d[] = { _cmd, _seq }; \ |
| 540 |
mipi_dsi_dual_dcs_write_buffer_multi(_ctx, _dsi1, _dsi2, d, \ |
| 541 |
ARRAY_SIZE(d)); \ |
| 542 |
} while (0) |
| 543 |
|
| 544 |
/** |
| 545 |
* struct mipi_dsi_driver - DSI driver |
| 546 |
* @driver: device driver model driver |
| 547 |
* @probe: callback for device binding |
| 548 |
* @remove: callback for device unbinding |
| 549 |
* @shutdown: called at shutdown time to quiesce the device |
| 550 |
*/ |
| 551 |
struct mipi_dsi_driver { |
| 552 |
struct device_driver driver; |
| 553 |
int(*probe)(struct mipi_dsi_device *dsi); |
| 554 |
void (*remove)(struct mipi_dsi_device *dsi); |
| 555 |
void (*shutdown)(struct mipi_dsi_device *dsi); |
| 556 |
}; |
| 557 |
|
| 558 |
static inline struct mipi_dsi_driver * |
| 559 |
to_mipi_dsi_driver(struct device_driver *driver) |
| 560 |
{ |
| 561 |
return container_of(driver, struct mipi_dsi_driver, driver); |
| 562 |
} |
| 563 |
|
| 564 |
static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi) |
| 565 |
{ |
| 566 |
return dev_get_drvdata(&dsi->dev); |
| 567 |
} |
| 568 |
|
| 569 |
static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data) |
| 570 |
{ |
| 571 |
dev_set_drvdata(&dsi->dev, data); |
| 572 |
} |
| 573 |
|
| 574 |
int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver, |
| 575 |
struct module *owner); |
| 576 |
void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver); |
| 577 |
|
| 578 |
#define mipi_dsi_driver_register(driver) \ |
| 579 |
mipi_dsi_driver_register_full(driver, THIS_MODULE) |
| 580 |
|
| 581 |
#define module_mipi_dsi_driver(__mipi_dsi_driver) \ |
| 582 |
module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \ |
| 583 |
mipi_dsi_driver_unregister) |
| 584 |
|
| 585 |
#endif /* __DRM_MIPI_DSI__ */ |