| 1 |
/* |
| 2 |
* OMAP Dual-Mode Timers |
| 3 |
* |
| 4 |
* Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ |
| 5 |
* Tarun Kanti DebBarma <[email protected]> |
| 6 |
* Thara Gopinath <[email protected]> |
| 7 |
* |
| 8 |
* Platform device conversion and hwmod support. |
| 9 |
* |
| 10 |
* Copyright (C) 2005 Nokia Corporation |
| 11 |
* Author: Lauri Leukkunen <[email protected]> |
| 12 |
* PWM and clock framwork support by Timo Teras. |
| 13 |
* |
| 14 |
* This program is free software; you can redistribute it and/or modify it |
| 15 |
* under the terms of the GNU General Public License as published by the |
| 16 |
* Free Software Foundation; either version 2 of the License, or (at your |
| 17 |
* option) any later version. |
| 18 |
* |
| 19 |
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| 20 |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 21 |
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 22 |
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 23 |
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 24 |
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 25 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 26 |
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 27 |
* |
| 28 |
* You should have received a copy of the GNU General Public License along |
| 29 |
* with this program; if not, write to the Free Software Foundation, Inc., |
| 30 |
* 675 Mass Ave, Cambridge, MA 02139, USA. |
| 31 |
*/ |
| 32 |
|
| 33 |
#include <linux/delay.h> |
| 34 |
#include <linux/io.h> |
| 35 |
#include <linux/platform_device.h> |
| 36 |
|
| 37 |
#ifndef __CLOCKSOURCE_DMTIMER_H |
| 38 |
#define __CLOCKSOURCE_DMTIMER_H |
| 39 |
|
| 40 |
/* clock sources */ |
| 41 |
#define OMAP_TIMER_SRC_SYS_CLK 0x00 |
| 42 |
#define OMAP_TIMER_SRC_32_KHZ 0x01 |
| 43 |
#define OMAP_TIMER_SRC_EXT_CLK 0x02 |
| 44 |
|
| 45 |
/* timer interrupt enable bits */ |
| 46 |
#define OMAP_TIMER_INT_CAPTURE (1 << 2) |
| 47 |
#define OMAP_TIMER_INT_OVERFLOW (1 << 1) |
| 48 |
#define OMAP_TIMER_INT_MATCH (1 << 0) |
| 49 |
|
| 50 |
/* trigger types */ |
| 51 |
#define OMAP_TIMER_TRIGGER_NONE 0x00 |
| 52 |
#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 |
| 53 |
#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 |
| 54 |
|
| 55 |
/* timer capabilities used in hwmod database */ |
| 56 |
#define OMAP_TIMER_SECURE 0x80000000 |
| 57 |
#define OMAP_TIMER_ALWON 0x40000000 |
| 58 |
#define OMAP_TIMER_HAS_PWM 0x20000000 |
| 59 |
#define OMAP_TIMER_NEEDS_RESET 0x10000000 |
| 60 |
#define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 |
| 61 |
|
| 62 |
struct omap_dm_timer { |
| 63 |
}; |
| 64 |
|
| 65 |
u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); |
| 66 |
|
| 67 |
/* |
| 68 |
* Do not use the defines below, they are not needed. They should be only |
| 69 |
* used by dmtimer.c and sys_timer related code. |
| 70 |
*/ |
| 71 |
|
| 72 |
/* |
| 73 |
* The interrupt registers are different between v1 and v2 ip. |
| 74 |
* These registers are offsets from timer->iobase. |
| 75 |
*/ |
| 76 |
#define OMAP_TIMER_ID_OFFSET 0x00 |
| 77 |
#define OMAP_TIMER_OCP_CFG_OFFSET 0x10 |
| 78 |
|
| 79 |
#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14 |
| 80 |
#define OMAP_TIMER_V1_STAT_OFFSET 0x18 |
| 81 |
#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c |
| 82 |
|
| 83 |
#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24 |
| 84 |
#define OMAP_TIMER_V2_IRQSTATUS 0x28 |
| 85 |
#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c |
| 86 |
#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30 |
| 87 |
|
| 88 |
/* |
| 89 |
* The functional registers have a different base on v1 and v2 ip. |
| 90 |
* These registers are offsets from timer->func_base. The func_base |
| 91 |
* is samae as io_base for v1 and io_base + 0x14 for v2 ip. |
| 92 |
* |
| 93 |
*/ |
| 94 |
#define OMAP_TIMER_V2_FUNC_OFFSET 0x14 |
| 95 |
|
| 96 |
#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 |
| 97 |
#define _OMAP_TIMER_CTRL_OFFSET 0x24 |
| 98 |
#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) |
| 99 |
#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) |
| 100 |
#define OMAP_TIMER_CTRL_PT (1 << 12) |
| 101 |
#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) |
| 102 |
#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) |
| 103 |
#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) |
| 104 |
#define OMAP_TIMER_CTRL_SCPWM (1 << 7) |
| 105 |
#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ |
| 106 |
#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ |
| 107 |
#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ |
| 108 |
#define OMAP_TIMER_CTRL_POSTED (1 << 2) |
| 109 |
#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ |
| 110 |
#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ |
| 111 |
#define _OMAP_TIMER_COUNTER_OFFSET 0x28 |
| 112 |
#define _OMAP_TIMER_LOAD_OFFSET 0x2c |
| 113 |
#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 |
| 114 |
#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 |
| 115 |
#define WP_NONE 0 /* no write pending bit */ |
| 116 |
#define WP_TCLR (1 << 0) |
| 117 |
#define WP_TCRR (1 << 1) |
| 118 |
#define WP_TLDR (1 << 2) |
| 119 |
#define WP_TTGR (1 << 3) |
| 120 |
#define WP_TMAR (1 << 4) |
| 121 |
#define WP_TPIR (1 << 5) |
| 122 |
#define WP_TNIR (1 << 6) |
| 123 |
#define WP_TCVR (1 << 7) |
| 124 |
#define WP_TOCR (1 << 8) |
| 125 |
#define WP_TOWR (1 << 9) |
| 126 |
#define _OMAP_TIMER_MATCH_OFFSET 0x38 |
| 127 |
#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c |
| 128 |
#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 |
| 129 |
#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ |
| 130 |
#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ |
| 131 |
#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ |
| 132 |
#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ |
| 133 |
#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ |
| 134 |
#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ |
| 135 |
|
| 136 |
#endif /* __CLOCKSOURCE_DMTIMER_H */ |