| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* IDT CPS Gen.2 Serial RapidIO switch family support |
| 4 |
* |
| 5 |
* Copyright 2010 Integrated Device Technology, Inc. |
| 6 |
* Alexandre Bounine <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <linux/stat.h> |
| 10 |
#include <linux/module.h> |
| 11 |
#include <linux/rio.h> |
| 12 |
#include <linux/rio_drv.h> |
| 13 |
#include <linux/rio_ids.h> |
| 14 |
#include <linux/delay.h> |
| 15 |
|
| 16 |
#include <asm/page.h> |
| 17 |
#include "../rio.h" |
| 18 |
|
| 19 |
#define LOCAL_RTE_CONF_DESTID_SEL 0x010070 |
| 20 |
#define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f |
| 21 |
|
| 22 |
#define IDT_LT_ERR_REPORT_EN 0x03100c |
| 23 |
|
| 24 |
#define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40) |
| 25 |
#define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04 |
| 26 |
|
| 27 |
#define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40) |
| 28 |
#define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c |
| 29 |
#define IDT_PORT_INIT_TX_ACQUIRED 0x00000020 |
| 30 |
|
| 31 |
#define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100) |
| 32 |
#define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10 |
| 33 |
|
| 34 |
#define IDT_DEV_CTRL_1 0xf2000c |
| 35 |
#define IDT_DEV_CTRL_1_GENPW 0x02000000 |
| 36 |
#define IDT_DEV_CTRL_1_PRSTBEH 0x00000001 |
| 37 |
|
| 38 |
#define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008 |
| 39 |
#define IDT_CFGBLK_ERR_REPORT 0xf20014 |
| 40 |
#define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002 |
| 41 |
|
| 42 |
#define IDT_AUX_PORT_ERR_CAP_EN 0x020000 |
| 43 |
#define IDT_AUX_ERR_REPORT_EN 0xf20018 |
| 44 |
#define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002 |
| 45 |
#define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001 |
| 46 |
|
| 47 |
#define IDT_ISLTL_ADDRESS_CAP 0x021014 |
| 48 |
|
| 49 |
#define IDT_RIO_DOMAIN 0xf20020 |
| 50 |
#define IDT_RIO_DOMAIN_MASK 0x000000ff |
| 51 |
|
| 52 |
#define IDT_PW_INFO_CSR 0xf20024 |
| 53 |
|
| 54 |
#define IDT_SOFT_RESET 0xf20040 |
| 55 |
#define IDT_SOFT_RESET_REQ 0x00030097 |
| 56 |
|
| 57 |
#define IDT_I2C_MCTRL 0xf20050 |
| 58 |
#define IDT_I2C_MCTRL_GENPW 0x04000000 |
| 59 |
|
| 60 |
#define IDT_JTAG_CTRL 0xf2005c |
| 61 |
#define IDT_JTAG_CTRL_GENPW 0x00000002 |
| 62 |
|
| 63 |
#define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100) |
| 64 |
#define IDT_LANE_CTRL_BC 0xffff00 |
| 65 |
#define IDT_LANE_CTRL_GENPW 0x00200000 |
| 66 |
#define IDT_LANE_DFE_1_BC 0xffff18 |
| 67 |
#define IDT_LANE_DFE_2_BC 0xffff1c |
| 68 |
|
| 69 |
#define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100) |
| 70 |
#define IDT_PORT_OPS_GENPW 0x08000000 |
| 71 |
#define IDT_PORT_OPS_PL_ELOG 0x00000040 |
| 72 |
#define IDT_PORT_OPS_LL_ELOG 0x00000020 |
| 73 |
#define IDT_PORT_OPS_LT_ELOG 0x00000010 |
| 74 |
#define IDT_PORT_OPS_BC 0xf4ff04 |
| 75 |
|
| 76 |
#define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100) |
| 77 |
|
| 78 |
#define IDT_ERR_CAP 0xfd0000 |
| 79 |
#define IDT_ERR_CAP_LOG_OVERWR 0x00000004 |
| 80 |
|
| 81 |
#define IDT_ERR_RD 0xfd0004 |
| 82 |
|
| 83 |
#define IDT_DEFAULT_ROUTE 0xde |
| 84 |
#define IDT_NO_ROUTE 0xdf |
| 85 |
|
| 86 |
static int |
| 87 |
idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, |
| 88 |
u16 table, u16 route_destid, u8 route_port) |
| 89 |
{ |
| 90 |
/* |
| 91 |
* Select routing table to update |
| 92 |
*/ |
| 93 |
if (table == RIO_GLOBAL_TABLE) |
| 94 |
table = 0; |
| 95 |
else |
| 96 |
table++; |
| 97 |
|
| 98 |
if (route_port == RIO_INVALID_ROUTE) |
| 99 |
route_port = IDT_DEFAULT_ROUTE; |
| 100 |
|
| 101 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 102 |
LOCAL_RTE_CONF_DESTID_SEL, table); |
| 103 |
|
| 104 |
/* |
| 105 |
* Program destination port for the specified destID |
| 106 |
*/ |
| 107 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 108 |
RIO_STD_RTE_CONF_DESTID_SEL_CSR, |
| 109 |
(u32)route_destid); |
| 110 |
|
| 111 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 112 |
RIO_STD_RTE_CONF_PORT_SEL_CSR, |
| 113 |
(u32)route_port); |
| 114 |
udelay(10); |
| 115 |
|
| 116 |
return 0; |
| 117 |
} |
| 118 |
|
| 119 |
static int |
| 120 |
idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, |
| 121 |
u16 table, u16 route_destid, u8 *route_port) |
| 122 |
{ |
| 123 |
u32 result; |
| 124 |
|
| 125 |
/* |
| 126 |
* Select routing table to read |
| 127 |
*/ |
| 128 |
if (table == RIO_GLOBAL_TABLE) |
| 129 |
table = 0; |
| 130 |
else |
| 131 |
table++; |
| 132 |
|
| 133 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 134 |
LOCAL_RTE_CONF_DESTID_SEL, table); |
| 135 |
|
| 136 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 137 |
RIO_STD_RTE_CONF_DESTID_SEL_CSR, |
| 138 |
route_destid); |
| 139 |
|
| 140 |
rio_mport_read_config_32(mport, destid, hopcount, |
| 141 |
RIO_STD_RTE_CONF_PORT_SEL_CSR, &result); |
| 142 |
|
| 143 |
if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result) |
| 144 |
*route_port = RIO_INVALID_ROUTE; |
| 145 |
else |
| 146 |
*route_port = (u8)result; |
| 147 |
|
| 148 |
return 0; |
| 149 |
} |
| 150 |
|
| 151 |
static int |
| 152 |
idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, |
| 153 |
u16 table) |
| 154 |
{ |
| 155 |
u32 i; |
| 156 |
|
| 157 |
/* |
| 158 |
* Select routing table to read |
| 159 |
*/ |
| 160 |
if (table == RIO_GLOBAL_TABLE) |
| 161 |
table = 0; |
| 162 |
else |
| 163 |
table++; |
| 164 |
|
| 165 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 166 |
LOCAL_RTE_CONF_DESTID_SEL, table); |
| 167 |
|
| 168 |
for (i = RIO_STD_RTE_CONF_EXTCFGEN; |
| 169 |
i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) { |
| 170 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 171 |
RIO_STD_RTE_CONF_DESTID_SEL_CSR, i); |
| 172 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 173 |
RIO_STD_RTE_CONF_PORT_SEL_CSR, |
| 174 |
(IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) | |
| 175 |
(IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE); |
| 176 |
i += 4; |
| 177 |
} |
| 178 |
|
| 179 |
return 0; |
| 180 |
} |
| 181 |
|
| 182 |
|
| 183 |
static int |
| 184 |
idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, |
| 185 |
u8 sw_domain) |
| 186 |
{ |
| 187 |
/* |
| 188 |
* Switch domain configuration operates only at global level |
| 189 |
*/ |
| 190 |
rio_mport_write_config_32(mport, destid, hopcount, |
| 191 |
IDT_RIO_DOMAIN, (u32)sw_domain); |
| 192 |
return 0; |
| 193 |
} |
| 194 |
|
| 195 |
static int |
| 196 |
idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, |
| 197 |
u8 *sw_domain) |
| 198 |
{ |
| 199 |
u32 regval; |
| 200 |
|
| 201 |
/* |
| 202 |
* Switch domain configuration operates only at global level |
| 203 |
*/ |
| 204 |
rio_mport_read_config_32(mport, destid, hopcount, |
| 205 |
IDT_RIO_DOMAIN, ®val); |
| 206 |
|
| 207 |
*sw_domain = (u8)(regval & 0xff); |
| 208 |
|
| 209 |
return 0; |
| 210 |
} |
| 211 |
|
| 212 |
static int |
| 213 |
idtg2_em_init(struct rio_dev *rdev) |
| 214 |
{ |
| 215 |
u32 regval; |
| 216 |
int i, tmp; |
| 217 |
|
| 218 |
/* |
| 219 |
* This routine performs device-specific initialization only. |
| 220 |
* All standard EM configuration should be performed at upper level. |
| 221 |
*/ |
| 222 |
|
| 223 |
pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); |
| 224 |
|
| 225 |
/* Set Port-Write info CSR: PRIO=3 and CRF=1 */ |
| 226 |
rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000); |
| 227 |
|
| 228 |
/* |
| 229 |
* Configure LT LAYER error reporting. |
| 230 |
*/ |
| 231 |
|
| 232 |
/* Enable standard (RIO.p8) error reporting */ |
| 233 |
rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN, |
| 234 |
REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR | |
| 235 |
REM_LTL_ERR_UNSUPTR); |
| 236 |
|
| 237 |
/* Use Port-Writes for LT layer error reporting. |
| 238 |
* Enable per-port reset |
| 239 |
*/ |
| 240 |
rio_read_config_32(rdev, IDT_DEV_CTRL_1, ®val); |
| 241 |
rio_write_config_32(rdev, IDT_DEV_CTRL_1, |
| 242 |
regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH); |
| 243 |
|
| 244 |
/* |
| 245 |
* Configure PORT error reporting. |
| 246 |
*/ |
| 247 |
|
| 248 |
/* Report all RIO.p8 errors supported by device */ |
| 249 |
rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037); |
| 250 |
|
| 251 |
/* Configure reporting of implementation specific errors/events */ |
| 252 |
rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC, |
| 253 |
IDT_PORT_INIT_TX_ACQUIRED); |
| 254 |
|
| 255 |
/* Use Port-Writes for port error reporting and enable error logging */ |
| 256 |
tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo); |
| 257 |
for (i = 0; i < tmp; i++) { |
| 258 |
rio_read_config_32(rdev, IDT_PORT_OPS(i), ®val); |
| 259 |
rio_write_config_32(rdev, |
| 260 |
IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW | |
| 261 |
IDT_PORT_OPS_PL_ELOG | |
| 262 |
IDT_PORT_OPS_LL_ELOG | |
| 263 |
IDT_PORT_OPS_LT_ELOG); |
| 264 |
} |
| 265 |
/* Overwrite error log if full */ |
| 266 |
rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR); |
| 267 |
|
| 268 |
/* |
| 269 |
* Configure LANE error reporting. |
| 270 |
*/ |
| 271 |
|
| 272 |
/* Disable line error reporting */ |
| 273 |
rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0); |
| 274 |
|
| 275 |
/* Use Port-Writes for lane error reporting (when enabled) |
| 276 |
* (do per-lane update because lanes may have different configuration) |
| 277 |
*/ |
| 278 |
tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16; |
| 279 |
for (i = 0; i < tmp; i++) { |
| 280 |
rio_read_config_32(rdev, IDT_LANE_CTRL(i), ®val); |
| 281 |
rio_write_config_32(rdev, IDT_LANE_CTRL(i), |
| 282 |
regval | IDT_LANE_CTRL_GENPW); |
| 283 |
} |
| 284 |
|
| 285 |
/* |
| 286 |
* Configure AUX error reporting. |
| 287 |
*/ |
| 288 |
|
| 289 |
/* Disable JTAG and I2C Error capture */ |
| 290 |
rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0); |
| 291 |
|
| 292 |
/* Disable JTAG and I2C Error reporting/logging */ |
| 293 |
rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0); |
| 294 |
|
| 295 |
/* Disable Port-Write notification from JTAG */ |
| 296 |
rio_write_config_32(rdev, IDT_JTAG_CTRL, 0); |
| 297 |
|
| 298 |
/* Disable Port-Write notification from I2C */ |
| 299 |
rio_read_config_32(rdev, IDT_I2C_MCTRL, ®val); |
| 300 |
rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW); |
| 301 |
|
| 302 |
/* |
| 303 |
* Configure CFG_BLK error reporting. |
| 304 |
*/ |
| 305 |
|
| 306 |
/* Disable Configuration Block error capture */ |
| 307 |
rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0); |
| 308 |
|
| 309 |
/* Disable Port-Writes for Configuration Block error reporting */ |
| 310 |
rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, ®val); |
| 311 |
rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT, |
| 312 |
regval & ~IDT_CFGBLK_ERR_REPORT_GENPW); |
| 313 |
|
| 314 |
/* set TVAL = ~50us */ |
| 315 |
rio_write_config_32(rdev, |
| 316 |
rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); |
| 317 |
|
| 318 |
return 0; |
| 319 |
} |
| 320 |
|
| 321 |
static int |
| 322 |
idtg2_em_handler(struct rio_dev *rdev, u8 portnum) |
| 323 |
{ |
| 324 |
u32 regval, em_perrdet, em_ltlerrdet; |
| 325 |
|
| 326 |
rio_read_config_32(rdev, |
| 327 |
rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet); |
| 328 |
if (em_ltlerrdet) { |
| 329 |
/* Service Logical/Transport Layer Error(s) */ |
| 330 |
if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) { |
| 331 |
/* Implementation specific error reported */ |
| 332 |
rio_read_config_32(rdev, |
| 333 |
IDT_ISLTL_ADDRESS_CAP, ®val); |
| 334 |
|
| 335 |
pr_debug("RIO: %s Implementation Specific LTL errors" \ |
| 336 |
" 0x%x @(0x%x)\n", |
| 337 |
rio_name(rdev), em_ltlerrdet, regval); |
| 338 |
|
| 339 |
/* Clear implementation specific address capture CSR */ |
| 340 |
rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0); |
| 341 |
|
| 342 |
} |
| 343 |
} |
| 344 |
|
| 345 |
rio_read_config_32(rdev, |
| 346 |
rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet); |
| 347 |
if (em_perrdet) { |
| 348 |
/* Service Port-Level Error(s) */ |
| 349 |
if (em_perrdet & REM_PED_IMPL_SPEC) { |
| 350 |
/* Implementation Specific port error reported */ |
| 351 |
|
| 352 |
/* Get IS errors reported */ |
| 353 |
rio_read_config_32(rdev, |
| 354 |
IDT_PORT_ISERR_DET(portnum), ®val); |
| 355 |
|
| 356 |
pr_debug("RIO: %s Implementation Specific Port" \ |
| 357 |
" errors 0x%x\n", rio_name(rdev), regval); |
| 358 |
|
| 359 |
/* Clear all implementation specific events */ |
| 360 |
rio_write_config_32(rdev, |
| 361 |
IDT_PORT_ISERR_DET(portnum), 0); |
| 362 |
} |
| 363 |
} |
| 364 |
|
| 365 |
return 0; |
| 366 |
} |
| 367 |
|
| 368 |
static ssize_t |
| 369 |
idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf) |
| 370 |
{ |
| 371 |
struct rio_dev *rdev = to_rio_dev(dev); |
| 372 |
ssize_t len = 0; |
| 373 |
u32 regval; |
| 374 |
|
| 375 |
while (!rio_read_config_32(rdev, IDT_ERR_RD, ®val)) { |
| 376 |
if (!regval) /* 0 = end of log */ |
| 377 |
break; |
| 378 |
len += snprintf(buf + len, PAGE_SIZE - len, |
| 379 |
"%08x\n", regval); |
| 380 |
if (len >= (PAGE_SIZE - 10)) |
| 381 |
break; |
| 382 |
} |
| 383 |
|
| 384 |
return len; |
| 385 |
} |
| 386 |
|
| 387 |
static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL); |
| 388 |
|
| 389 |
static int idtg2_sysfs(struct rio_dev *rdev, bool create) |
| 390 |
{ |
| 391 |
struct device *dev = &rdev->dev; |
| 392 |
int err = 0; |
| 393 |
|
| 394 |
if (create) { |
| 395 |
/* Initialize sysfs entries */ |
| 396 |
err = device_create_file(dev, &dev_attr_errlog); |
| 397 |
if (err) |
| 398 |
dev_err(dev, "Unable create sysfs errlog file\n"); |
| 399 |
} else |
| 400 |
device_remove_file(dev, &dev_attr_errlog); |
| 401 |
|
| 402 |
return err; |
| 403 |
} |
| 404 |
|
| 405 |
static struct rio_switch_ops idtg2_switch_ops = { |
| 406 |
.owner = THIS_MODULE, |
| 407 |
.add_entry = idtg2_route_add_entry, |
| 408 |
.get_entry = idtg2_route_get_entry, |
| 409 |
.clr_table = idtg2_route_clr_table, |
| 410 |
.set_domain = idtg2_set_domain, |
| 411 |
.get_domain = idtg2_get_domain, |
| 412 |
.em_init = idtg2_em_init, |
| 413 |
.em_handle = idtg2_em_handler, |
| 414 |
}; |
| 415 |
|
| 416 |
static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id) |
| 417 |
{ |
| 418 |
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); |
| 419 |
|
| 420 |
spin_lock(&rdev->rswitch->lock); |
| 421 |
|
| 422 |
if (rdev->rswitch->ops) { |
| 423 |
spin_unlock(&rdev->rswitch->lock); |
| 424 |
return -EINVAL; |
| 425 |
} |
| 426 |
|
| 427 |
rdev->rswitch->ops = &idtg2_switch_ops; |
| 428 |
|
| 429 |
if (rdev->do_enum) { |
| 430 |
/* Ensure that default routing is disabled on startup */ |
| 431 |
rio_write_config_32(rdev, |
| 432 |
RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE); |
| 433 |
} |
| 434 |
|
| 435 |
spin_unlock(&rdev->rswitch->lock); |
| 436 |
|
| 437 |
/* Create device-specific sysfs attributes */ |
| 438 |
idtg2_sysfs(rdev, true); |
| 439 |
|
| 440 |
return 0; |
| 441 |
} |
| 442 |
|
| 443 |
static void idtg2_remove(struct rio_dev *rdev) |
| 444 |
{ |
| 445 |
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); |
| 446 |
spin_lock(&rdev->rswitch->lock); |
| 447 |
if (rdev->rswitch->ops != &idtg2_switch_ops) { |
| 448 |
spin_unlock(&rdev->rswitch->lock); |
| 449 |
return; |
| 450 |
} |
| 451 |
rdev->rswitch->ops = NULL; |
| 452 |
spin_unlock(&rdev->rswitch->lock); |
| 453 |
/* Remove device-specific sysfs attributes */ |
| 454 |
idtg2_sysfs(rdev, false); |
| 455 |
} |
| 456 |
|
| 457 |
static const struct rio_device_id idtg2_id_table[] = { |
| 458 |
{RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)}, |
| 459 |
{RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)}, |
| 460 |
{RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)}, |
| 461 |
{RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)}, |
| 462 |
{RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)}, |
| 463 |
{ 0, } /* terminate list */ |
| 464 |
}; |
| 465 |
|
| 466 |
static struct rio_driver idtg2_driver = { |
| 467 |
.name = "idt_gen2", |
| 468 |
.id_table = idtg2_id_table, |
| 469 |
.probe = idtg2_probe, |
| 470 |
.remove = idtg2_remove, |
| 471 |
}; |
| 472 |
|
| 473 |
static int __init idtg2_init(void) |
| 474 |
{ |
| 475 |
return rio_register_driver(&idtg2_driver); |
| 476 |
} |
| 477 |
|
| 478 |
static void __exit idtg2_exit(void) |
| 479 |
{ |
| 480 |
pr_debug("RIO: %s\n", __func__); |
| 481 |
rio_unregister_driver(&idtg2_driver); |
| 482 |
pr_debug("RIO: %s done\n", __func__); |
| 483 |
} |
| 484 |
|
| 485 |
device_initcall(idtg2_init); |
| 486 |
module_exit(idtg2_exit); |
| 487 |
|
| 488 |
MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver"); |
| 489 |
MODULE_AUTHOR("Integrated Device Technology, Inc."); |
| 490 |
MODULE_LICENSE("GPL"); |