| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* ARMv6 Performance counter handling code. |
| 4 |
* |
| 5 |
* Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles |
| 6 |
* |
| 7 |
* ARMv6 has 2 configurable performance counters and a single cycle counter. |
| 8 |
* They all share a single reset bit but can be written to zero so we can use |
| 9 |
* that for a reset. |
| 10 |
* |
| 11 |
* The counters can't be individually enabled or disabled so when we remove |
| 12 |
* one event and replace it with another we could get spurious counts from the |
| 13 |
* wrong event. However, we can take advantage of the fact that the |
| 14 |
* performance counters can export events to the event bus, and the event bus |
| 15 |
* itself can be monitored. This requires that we *don't* export the events to |
| 16 |
* the event bus. The procedure for disabling a configurable counter is: |
| 17 |
* - change the counter to count the ETMEXTOUT[0] signal (0x20). This |
| 18 |
* effectively stops the counter from counting. |
| 19 |
* - disable the counter's interrupt generation (each counter has it's |
| 20 |
* own interrupt enable bit). |
| 21 |
* Once stopped, the counter value can be written as 0 to reset. |
| 22 |
* |
| 23 |
* To enable a counter: |
| 24 |
* - enable the counter's interrupt generation. |
| 25 |
* - set the new event type. |
| 26 |
* |
| 27 |
* Note: the dedicated cycle counter only counts cycles and can't be |
| 28 |
* enabled/disabled independently of the others. When we want to disable the |
| 29 |
* cycle counter, we have to just disable the interrupt reporting and start |
| 30 |
* ignoring that counter. When re-enabling, we have to reset the value and |
| 31 |
* enable the interrupt. |
| 32 |
*/ |
| 33 |
|
| 34 |
#include <asm/cputype.h> |
| 35 |
#include <asm/irq_regs.h> |
| 36 |
|
| 37 |
#include <linux/of.h> |
| 38 |
#include <linux/perf/arm_pmu.h> |
| 39 |
#include <linux/platform_device.h> |
| 40 |
|
| 41 |
enum armv6_perf_types { |
| 42 |
ARMV6_PERFCTR_ICACHE_MISS = 0x0, |
| 43 |
ARMV6_PERFCTR_IBUF_STALL = 0x1, |
| 44 |
ARMV6_PERFCTR_DDEP_STALL = 0x2, |
| 45 |
ARMV6_PERFCTR_ITLB_MISS = 0x3, |
| 46 |
ARMV6_PERFCTR_DTLB_MISS = 0x4, |
| 47 |
ARMV6_PERFCTR_BR_EXEC = 0x5, |
| 48 |
ARMV6_PERFCTR_BR_MISPREDICT = 0x6, |
| 49 |
ARMV6_PERFCTR_INSTR_EXEC = 0x7, |
| 50 |
ARMV6_PERFCTR_DCACHE_HIT = 0x9, |
| 51 |
ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, |
| 52 |
ARMV6_PERFCTR_DCACHE_MISS = 0xB, |
| 53 |
ARMV6_PERFCTR_DCACHE_WBACK = 0xC, |
| 54 |
ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, |
| 55 |
ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, |
| 56 |
ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, |
| 57 |
ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, |
| 58 |
ARMV6_PERFCTR_WBUF_DRAINED = 0x12, |
| 59 |
ARMV6_PERFCTR_CPU_CYCLES = 0xFF, |
| 60 |
ARMV6_PERFCTR_NOP = 0x20, |
| 61 |
}; |
| 62 |
|
| 63 |
enum armv6_counters { |
| 64 |
ARMV6_CYCLE_COUNTER = 0, |
| 65 |
ARMV6_COUNTER0, |
| 66 |
ARMV6_COUNTER1, |
| 67 |
ARMV6_NUM_COUNTERS |
| 68 |
}; |
| 69 |
|
| 70 |
/* |
| 71 |
* The hardware events that we support. We do support cache operations but |
| 72 |
* we have harvard caches and no way to combine instruction and data |
| 73 |
* accesses/misses in hardware. |
| 74 |
*/ |
| 75 |
static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { |
| 76 |
PERF_MAP_ALL_UNSUPPORTED, |
| 77 |
[PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, |
| 78 |
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, |
| 79 |
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, |
| 80 |
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, |
| 81 |
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL, |
| 82 |
[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL, |
| 83 |
}; |
| 84 |
|
| 85 |
static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] |
| 86 |
[PERF_COUNT_HW_CACHE_OP_MAX] |
| 87 |
[PERF_COUNT_HW_CACHE_RESULT_MAX] = { |
| 88 |
PERF_CACHE_MAP_ALL_UNSUPPORTED, |
| 89 |
|
| 90 |
/* |
| 91 |
* The performance counters don't differentiate between read and write |
| 92 |
* accesses/misses so this isn't strictly correct, but it's the best we |
| 93 |
* can do. Writes and reads get combined. |
| 94 |
*/ |
| 95 |
[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, |
| 96 |
[C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, |
| 97 |
[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, |
| 98 |
[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, |
| 99 |
|
| 100 |
[C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, |
| 101 |
|
| 102 |
/* |
| 103 |
* The ARM performance counters can count micro DTLB misses, micro ITLB |
| 104 |
* misses and main TLB misses. There isn't an event for TLB misses, so |
| 105 |
* use the micro misses here and if users want the main TLB misses they |
| 106 |
* can use a raw counter. |
| 107 |
*/ |
| 108 |
[C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, |
| 109 |
[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, |
| 110 |
|
| 111 |
[C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, |
| 112 |
[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, |
| 113 |
}; |
| 114 |
|
| 115 |
static inline unsigned long |
| 116 |
armv6_pmcr_read(void) |
| 117 |
{ |
| 118 |
u32 val; |
| 119 |
asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); |
| 120 |
return val; |
| 121 |
} |
| 122 |
|
| 123 |
static inline void |
| 124 |
armv6_pmcr_write(unsigned long val) |
| 125 |
{ |
| 126 |
asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); |
| 127 |
} |
| 128 |
|
| 129 |
#define ARMV6_PMCR_ENABLE (1 << 0) |
| 130 |
#define ARMV6_PMCR_CTR01_RESET (1 << 1) |
| 131 |
#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) |
| 132 |
#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) |
| 133 |
#define ARMV6_PMCR_COUNT0_IEN (1 << 4) |
| 134 |
#define ARMV6_PMCR_COUNT1_IEN (1 << 5) |
| 135 |
#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) |
| 136 |
#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) |
| 137 |
#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) |
| 138 |
#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) |
| 139 |
#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 |
| 140 |
#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
| 141 |
#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 |
| 142 |
#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
| 143 |
|
| 144 |
#define ARMV6_PMCR_OVERFLOWED_MASK \ |
| 145 |
(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ |
| 146 |
ARMV6_PMCR_CCOUNT_OVERFLOW) |
| 147 |
|
| 148 |
static inline int |
| 149 |
armv6_pmcr_has_overflowed(unsigned long pmcr) |
| 150 |
{ |
| 151 |
return pmcr & ARMV6_PMCR_OVERFLOWED_MASK; |
| 152 |
} |
| 153 |
|
| 154 |
static inline int |
| 155 |
armv6_pmcr_counter_has_overflowed(unsigned long pmcr, |
| 156 |
enum armv6_counters counter) |
| 157 |
{ |
| 158 |
int ret = 0; |
| 159 |
|
| 160 |
if (ARMV6_CYCLE_COUNTER == counter) |
| 161 |
ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; |
| 162 |
else if (ARMV6_COUNTER0 == counter) |
| 163 |
ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; |
| 164 |
else if (ARMV6_COUNTER1 == counter) |
| 165 |
ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; |
| 166 |
else |
| 167 |
WARN_ONCE(1, "invalid counter number (%d)\n", counter); |
| 168 |
|
| 169 |
return ret; |
| 170 |
} |
| 171 |
|
| 172 |
static inline u64 armv6pmu_read_counter(struct perf_event *event) |
| 173 |
{ |
| 174 |
struct hw_perf_event *hwc = &event->hw; |
| 175 |
int counter = hwc->idx; |
| 176 |
unsigned long value = 0; |
| 177 |
|
| 178 |
if (ARMV6_CYCLE_COUNTER == counter) |
| 179 |
asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); |
| 180 |
else if (ARMV6_COUNTER0 == counter) |
| 181 |
asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); |
| 182 |
else if (ARMV6_COUNTER1 == counter) |
| 183 |
asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); |
| 184 |
else |
| 185 |
WARN_ONCE(1, "invalid counter number (%d)\n", counter); |
| 186 |
|
| 187 |
return value; |
| 188 |
} |
| 189 |
|
| 190 |
static inline void armv6pmu_write_counter(struct perf_event *event, u64 value) |
| 191 |
{ |
| 192 |
struct hw_perf_event *hwc = &event->hw; |
| 193 |
int counter = hwc->idx; |
| 194 |
|
| 195 |
if (ARMV6_CYCLE_COUNTER == counter) |
| 196 |
asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); |
| 197 |
else if (ARMV6_COUNTER0 == counter) |
| 198 |
asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); |
| 199 |
else if (ARMV6_COUNTER1 == counter) |
| 200 |
asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); |
| 201 |
else |
| 202 |
WARN_ONCE(1, "invalid counter number (%d)\n", counter); |
| 203 |
} |
| 204 |
|
| 205 |
static void armv6pmu_enable_event(struct perf_event *event) |
| 206 |
{ |
| 207 |
unsigned long val, mask, evt; |
| 208 |
struct hw_perf_event *hwc = &event->hw; |
| 209 |
int idx = hwc->idx; |
| 210 |
|
| 211 |
if (ARMV6_CYCLE_COUNTER == idx) { |
| 212 |
mask = 0; |
| 213 |
evt = ARMV6_PMCR_CCOUNT_IEN; |
| 214 |
} else if (ARMV6_COUNTER0 == idx) { |
| 215 |
mask = ARMV6_PMCR_EVT_COUNT0_MASK; |
| 216 |
evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | |
| 217 |
ARMV6_PMCR_COUNT0_IEN; |
| 218 |
} else if (ARMV6_COUNTER1 == idx) { |
| 219 |
mask = ARMV6_PMCR_EVT_COUNT1_MASK; |
| 220 |
evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | |
| 221 |
ARMV6_PMCR_COUNT1_IEN; |
| 222 |
} else { |
| 223 |
WARN_ONCE(1, "invalid counter number (%d)\n", idx); |
| 224 |
return; |
| 225 |
} |
| 226 |
|
| 227 |
/* |
| 228 |
* Mask out the current event and set the counter to count the event |
| 229 |
* that we're interested in. |
| 230 |
*/ |
| 231 |
val = armv6_pmcr_read(); |
| 232 |
val &= ~mask; |
| 233 |
val |= evt; |
| 234 |
armv6_pmcr_write(val); |
| 235 |
} |
| 236 |
|
| 237 |
static irqreturn_t |
| 238 |
armv6pmu_handle_irq(struct arm_pmu *cpu_pmu) |
| 239 |
{ |
| 240 |
unsigned long pmcr = armv6_pmcr_read(); |
| 241 |
struct perf_sample_data data; |
| 242 |
struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); |
| 243 |
struct pt_regs *regs; |
| 244 |
int idx; |
| 245 |
|
| 246 |
if (!armv6_pmcr_has_overflowed(pmcr)) |
| 247 |
return IRQ_NONE; |
| 248 |
|
| 249 |
regs = get_irq_regs(); |
| 250 |
|
| 251 |
/* |
| 252 |
* The interrupts are cleared by writing the overflow flags back to |
| 253 |
* the control register. All of the other bits don't have any effect |
| 254 |
* if they are rewritten, so write the whole value back. |
| 255 |
*/ |
| 256 |
armv6_pmcr_write(pmcr); |
| 257 |
|
| 258 |
for_each_set_bit(idx, cpu_pmu->cntr_mask, ARMV6_NUM_COUNTERS) { |
| 259 |
struct perf_event *event = cpuc->events[idx]; |
| 260 |
struct hw_perf_event *hwc; |
| 261 |
|
| 262 |
/* Ignore if we don't have an event. */ |
| 263 |
if (!event) |
| 264 |
continue; |
| 265 |
|
| 266 |
/* |
| 267 |
* We have a single interrupt for all counters. Check that |
| 268 |
* each counter has overflowed before we process it. |
| 269 |
*/ |
| 270 |
if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) |
| 271 |
continue; |
| 272 |
|
| 273 |
hwc = &event->hw; |
| 274 |
armpmu_event_update(event); |
| 275 |
perf_sample_data_init(&data, 0, hwc->last_period); |
| 276 |
if (!armpmu_event_set_period(event)) |
| 277 |
continue; |
| 278 |
|
| 279 |
perf_event_overflow(event, &data, regs); |
| 280 |
} |
| 281 |
|
| 282 |
/* |
| 283 |
* Handle the pending perf events. |
| 284 |
* |
| 285 |
* Note: this call *must* be run with interrupts disabled. For |
| 286 |
* platforms that can have the PMU interrupts raised as an NMI, this |
| 287 |
* will not work. |
| 288 |
*/ |
| 289 |
irq_work_run(); |
| 290 |
|
| 291 |
return IRQ_HANDLED; |
| 292 |
} |
| 293 |
|
| 294 |
static void armv6pmu_start(struct arm_pmu *cpu_pmu) |
| 295 |
{ |
| 296 |
unsigned long val; |
| 297 |
|
| 298 |
val = armv6_pmcr_read(); |
| 299 |
val |= ARMV6_PMCR_ENABLE; |
| 300 |
armv6_pmcr_write(val); |
| 301 |
} |
| 302 |
|
| 303 |
static void armv6pmu_stop(struct arm_pmu *cpu_pmu) |
| 304 |
{ |
| 305 |
unsigned long val; |
| 306 |
|
| 307 |
val = armv6_pmcr_read(); |
| 308 |
val &= ~ARMV6_PMCR_ENABLE; |
| 309 |
armv6_pmcr_write(val); |
| 310 |
} |
| 311 |
|
| 312 |
static int |
| 313 |
armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, |
| 314 |
struct perf_event *event) |
| 315 |
{ |
| 316 |
struct hw_perf_event *hwc = &event->hw; |
| 317 |
/* Always place a cycle counter into the cycle counter. */ |
| 318 |
if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) { |
| 319 |
if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) |
| 320 |
return -EAGAIN; |
| 321 |
|
| 322 |
return ARMV6_CYCLE_COUNTER; |
| 323 |
} else { |
| 324 |
/* |
| 325 |
* For anything other than a cycle counter, try and use |
| 326 |
* counter0 and counter1. |
| 327 |
*/ |
| 328 |
if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) |
| 329 |
return ARMV6_COUNTER1; |
| 330 |
|
| 331 |
if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) |
| 332 |
return ARMV6_COUNTER0; |
| 333 |
|
| 334 |
/* The counters are all in use. */ |
| 335 |
return -EAGAIN; |
| 336 |
} |
| 337 |
} |
| 338 |
|
| 339 |
static void armv6pmu_clear_event_idx(struct pmu_hw_events *cpuc, |
| 340 |
struct perf_event *event) |
| 341 |
{ |
| 342 |
clear_bit(event->hw.idx, cpuc->used_mask); |
| 343 |
} |
| 344 |
|
| 345 |
static void armv6pmu_disable_event(struct perf_event *event) |
| 346 |
{ |
| 347 |
unsigned long val, mask, evt; |
| 348 |
struct hw_perf_event *hwc = &event->hw; |
| 349 |
int idx = hwc->idx; |
| 350 |
|
| 351 |
if (ARMV6_CYCLE_COUNTER == idx) { |
| 352 |
mask = ARMV6_PMCR_CCOUNT_IEN; |
| 353 |
evt = 0; |
| 354 |
} else if (ARMV6_COUNTER0 == idx) { |
| 355 |
mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; |
| 356 |
evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; |
| 357 |
} else if (ARMV6_COUNTER1 == idx) { |
| 358 |
mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; |
| 359 |
evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; |
| 360 |
} else { |
| 361 |
WARN_ONCE(1, "invalid counter number (%d)\n", idx); |
| 362 |
return; |
| 363 |
} |
| 364 |
|
| 365 |
/* |
| 366 |
* Mask out the current event and set the counter to count the number |
| 367 |
* of ETM bus signal assertion cycles. The external reporting should |
| 368 |
* be disabled and so this should never increment. |
| 369 |
*/ |
| 370 |
val = armv6_pmcr_read(); |
| 371 |
val &= ~mask; |
| 372 |
val |= evt; |
| 373 |
armv6_pmcr_write(val); |
| 374 |
} |
| 375 |
|
| 376 |
static int armv6_map_event(struct perf_event *event) |
| 377 |
{ |
| 378 |
return armpmu_map_event(event, &armv6_perf_map, |
| 379 |
&armv6_perf_cache_map, 0xFF); |
| 380 |
} |
| 381 |
|
| 382 |
static void armv6pmu_init(struct arm_pmu *cpu_pmu) |
| 383 |
{ |
| 384 |
cpu_pmu->handle_irq = armv6pmu_handle_irq; |
| 385 |
cpu_pmu->enable = armv6pmu_enable_event; |
| 386 |
cpu_pmu->disable = armv6pmu_disable_event; |
| 387 |
cpu_pmu->read_counter = armv6pmu_read_counter; |
| 388 |
cpu_pmu->write_counter = armv6pmu_write_counter; |
| 389 |
cpu_pmu->get_event_idx = armv6pmu_get_event_idx; |
| 390 |
cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx; |
| 391 |
cpu_pmu->start = armv6pmu_start; |
| 392 |
cpu_pmu->stop = armv6pmu_stop; |
| 393 |
cpu_pmu->map_event = armv6_map_event; |
| 394 |
|
| 395 |
bitmap_set(cpu_pmu->cntr_mask, 0, ARMV6_NUM_COUNTERS); |
| 396 |
} |
| 397 |
|
| 398 |
static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) |
| 399 |
{ |
| 400 |
armv6pmu_init(cpu_pmu); |
| 401 |
cpu_pmu->name = "armv6_1136"; |
| 402 |
return 0; |
| 403 |
} |
| 404 |
|
| 405 |
static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) |
| 406 |
{ |
| 407 |
armv6pmu_init(cpu_pmu); |
| 408 |
cpu_pmu->name = "armv6_1176"; |
| 409 |
return 0; |
| 410 |
} |
| 411 |
|
| 412 |
static const struct of_device_id armv6_pmu_of_device_ids[] = { |
| 413 |
{.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, |
| 414 |
{.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, |
| 415 |
{ /* sentinel value */ } |
| 416 |
}; |
| 417 |
|
| 418 |
static int armv6_pmu_device_probe(struct platform_device *pdev) |
| 419 |
{ |
| 420 |
return arm_pmu_device_probe(pdev, armv6_pmu_of_device_ids, NULL); |
| 421 |
} |
| 422 |
|
| 423 |
static struct platform_driver armv6_pmu_driver = { |
| 424 |
.driver = { |
| 425 |
.name = "armv6-pmu", |
| 426 |
.of_match_table = armv6_pmu_of_device_ids, |
| 427 |
}, |
| 428 |
.probe = armv6_pmu_device_probe, |
| 429 |
}; |
| 430 |
|
| 431 |
builtin_platform_driver(armv6_pmu_driver); |