| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Wacom protocol 4 serial tablet driver |
| 4 |
* |
| 5 |
* Copyright 2014 Hans de Goede <[email protected]> |
| 6 |
* Copyright 2011-2012 Julian Squires <[email protected]> |
| 7 |
* |
| 8 |
* Many thanks to Bill Seremetis, without whom PenPartner support |
| 9 |
* would not have been possible. Thanks to Patrick Mahoney. |
| 10 |
* |
| 11 |
* This driver was developed with reference to much code written by others, |
| 12 |
* particularly: |
| 13 |
* - elo, gunze drivers by Vojtech Pavlik <[email protected]>; |
| 14 |
* - wacom_w8001 driver by Jaya Kumar <[email protected]>; |
| 15 |
* - the USB wacom input driver, credited to many people |
| 16 |
* (see drivers/input/tablet/wacom.h); |
| 17 |
* - new and old versions of linuxwacom / xf86-input-wacom credited to |
| 18 |
* Frederic Lepied, France. <[email protected]> and |
| 19 |
* Ping Cheng, Wacom. <[email protected]>; |
| 20 |
* - and xf86wacom.c (a presumably ancient version of the linuxwacom code), |
| 21 |
* by Frederic Lepied and Raph Levien <[email protected]>. |
| 22 |
* |
| 23 |
* To do: |
| 24 |
* - support pad buttons; (requires access to a model with pad buttons) |
| 25 |
* - support (protocol 4-style) tilt (requires access to a > 1.4 rom model) |
| 26 |
*/ |
| 27 |
|
| 28 |
/* |
| 29 |
* Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code, |
| 30 |
* protocol 4 uses 7 or 9 byte of data in the following format: |
| 31 |
* |
| 32 |
* Byte 1 |
| 33 |
* bit 7 Sync bit always 1 |
| 34 |
* bit 6 Pointing device detected |
| 35 |
* bit 5 Cursor = 0 / Stylus = 1 |
| 36 |
* bit 4 Reserved |
| 37 |
* bit 3 1 if a button on the pointing device has been pressed |
| 38 |
* bit 2 P0 (optional) |
| 39 |
* bit 1 X15 |
| 40 |
* bit 0 X14 |
| 41 |
* |
| 42 |
* Byte 2 |
| 43 |
* bit 7 Always 0 |
| 44 |
* bits 6-0 = X13 - X7 |
| 45 |
* |
| 46 |
* Byte 3 |
| 47 |
* bit 7 Always 0 |
| 48 |
* bits 6-0 = X6 - X0 |
| 49 |
* |
| 50 |
* Byte 4 |
| 51 |
* bit 7 Always 0 |
| 52 |
* bit 6 B3 |
| 53 |
* bit 5 B2 |
| 54 |
* bit 4 B1 |
| 55 |
* bit 3 B0 |
| 56 |
* bit 2 P1 (optional) |
| 57 |
* bit 1 Y15 |
| 58 |
* bit 0 Y14 |
| 59 |
* |
| 60 |
* Byte 5 |
| 61 |
* bit 7 Always 0 |
| 62 |
* bits 6-0 = Y13 - Y7 |
| 63 |
* |
| 64 |
* Byte 6 |
| 65 |
* bit 7 Always 0 |
| 66 |
* bits 6-0 = Y6 - Y0 |
| 67 |
* |
| 68 |
* Byte 7 |
| 69 |
* bit 7 Always 0 |
| 70 |
* bit 6 Sign of pressure data; or wheel-rel for cursor tool |
| 71 |
* bit 5 P7; or REL1 for cursor tool |
| 72 |
* bit 4 P6; or REL0 for cursor tool |
| 73 |
* bit 3 P5 |
| 74 |
* bit 2 P4 |
| 75 |
* bit 1 P3 |
| 76 |
* bit 0 P2 |
| 77 |
* |
| 78 |
* byte 8 and 9 are optional and present only |
| 79 |
* in tilt mode. |
| 80 |
* |
| 81 |
* Byte 8 |
| 82 |
* bit 7 Always 0 |
| 83 |
* bit 6 Sign of tilt X |
| 84 |
* bit 5 Xt6 |
| 85 |
* bit 4 Xt5 |
| 86 |
* bit 3 Xt4 |
| 87 |
* bit 2 Xt3 |
| 88 |
* bit 1 Xt2 |
| 89 |
* bit 0 Xt1 |
| 90 |
* |
| 91 |
* Byte 9 |
| 92 |
* bit 7 Always 0 |
| 93 |
* bit 6 Sign of tilt Y |
| 94 |
* bit 5 Yt6 |
| 95 |
* bit 4 Yt5 |
| 96 |
* bit 3 Yt4 |
| 97 |
* bit 2 Yt3 |
| 98 |
* bit 1 Yt2 |
| 99 |
* bit 0 Yt1 |
| 100 |
*/ |
| 101 |
|
| 102 |
#include <linux/completion.h> |
| 103 |
#include <linux/init.h> |
| 104 |
#include <linux/input.h> |
| 105 |
#include <linux/interrupt.h> |
| 106 |
#include <linux/kernel.h> |
| 107 |
#include <linux/module.h> |
| 108 |
#include <linux/serio.h> |
| 109 |
#include <linux/slab.h> |
| 110 |
#include <linux/string.h> |
| 111 |
|
| 112 |
MODULE_AUTHOR("Julian Squires <[email protected]>, Hans de Goede <[email protected]>"); |
| 113 |
MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver"); |
| 114 |
MODULE_LICENSE("GPL"); |
| 115 |
|
| 116 |
#define REQUEST_MODEL_AND_ROM_VERSION "~#" |
| 117 |
#define REQUEST_MAX_COORDINATES "~C\r" |
| 118 |
#define REQUEST_CONFIGURATION_STRING "~R\r" |
| 119 |
#define REQUEST_RESET_TO_PROTOCOL_IV "\r#" |
| 120 |
/* |
| 121 |
* Note: sending "\r$\r" causes at least the Digitizer II to send |
| 122 |
* packets in ASCII instead of binary. "\r#" seems to undo that. |
| 123 |
*/ |
| 124 |
|
| 125 |
#define COMMAND_START_SENDING_PACKETS "ST\r" |
| 126 |
#define COMMAND_STOP_SENDING_PACKETS "SP\r" |
| 127 |
#define COMMAND_MULTI_MODE_INPUT "MU1\r" |
| 128 |
#define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r" |
| 129 |
#define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r" |
| 130 |
#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r" |
| 131 |
#define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r" |
| 132 |
#define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r" |
| 133 |
#define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r" |
| 134 |
#define COMMAND_ENABLE_PRESSURE_MODE "PH1\r" |
| 135 |
#define COMMAND_Z_FILTER "ZF1\r" |
| 136 |
|
| 137 |
/* Note that this is a protocol 4 packet without tilt information. */ |
| 138 |
#define PACKET_LENGTH 7 |
| 139 |
#define DATA_SIZE 32 |
| 140 |
|
| 141 |
/* flags */ |
| 142 |
#define F_COVERS_SCREEN 0x01 |
| 143 |
#define F_HAS_STYLUS2 0x02 |
| 144 |
#define F_HAS_SCROLLWHEEL 0x04 |
| 145 |
|
| 146 |
/* device IDs */ |
| 147 |
#define STYLUS_DEVICE_ID 0x02 |
| 148 |
#define CURSOR_DEVICE_ID 0x06 |
| 149 |
#define ERASER_DEVICE_ID 0x0A |
| 150 |
|
| 151 |
enum { STYLUS = 1, ERASER, CURSOR }; |
| 152 |
|
| 153 |
static const struct { |
| 154 |
int device_id; |
| 155 |
int input_id; |
| 156 |
} tools[] = { |
| 157 |
{ 0, 0 }, |
| 158 |
{ STYLUS_DEVICE_ID, BTN_TOOL_PEN }, |
| 159 |
{ ERASER_DEVICE_ID, BTN_TOOL_RUBBER }, |
| 160 |
{ CURSOR_DEVICE_ID, BTN_TOOL_MOUSE }, |
| 161 |
}; |
| 162 |
|
| 163 |
struct wacom { |
| 164 |
struct input_dev *dev; |
| 165 |
struct completion cmd_done; |
| 166 |
int result; |
| 167 |
u8 expect; |
| 168 |
u8 eraser_mask; |
| 169 |
unsigned int extra_z_bits; |
| 170 |
unsigned int flags; |
| 171 |
unsigned int res_x, res_y; |
| 172 |
unsigned int max_x, max_y; |
| 173 |
unsigned int tool; |
| 174 |
unsigned int idx; |
| 175 |
u8 data[DATA_SIZE]; |
| 176 |
char phys[32]; |
| 177 |
}; |
| 178 |
|
| 179 |
enum { |
| 180 |
MODEL_CINTIQ = 0x504C, /* PL */ |
| 181 |
MODEL_CINTIQ2 = 0x4454, /* DT */ |
| 182 |
MODEL_DIGITIZER_II = 0x5544, /* UD */ |
| 183 |
MODEL_GRAPHIRE = 0x4554, /* ET */ |
| 184 |
MODEL_PENPARTNER = 0x4354, /* CT */ |
| 185 |
MODEL_ARTPAD_II = 0x4B54, /* KT */ |
| 186 |
}; |
| 187 |
|
| 188 |
static void wacom_handle_model_response(struct wacom *wacom) |
| 189 |
{ |
| 190 |
int major_v, minor_v, r = 0; |
| 191 |
char *p; |
| 192 |
|
| 193 |
p = strrchr(wacom->data, 'V'); |
| 194 |
if (p) |
| 195 |
r = sscanf(p + 1, "%u.%u", &major_v, &minor_v); |
| 196 |
if (r != 2) |
| 197 |
major_v = minor_v = 0; |
| 198 |
|
| 199 |
switch (wacom->data[2] << 8 | wacom->data[3]) { |
| 200 |
case MODEL_CINTIQ: /* UNTESTED */ |
| 201 |
case MODEL_CINTIQ2: |
| 202 |
if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) { |
| 203 |
wacom->dev->name = "Wacom Cintiq"; |
| 204 |
wacom->dev->id.version = MODEL_CINTIQ; |
| 205 |
} else { |
| 206 |
wacom->dev->name = "Wacom Cintiq II"; |
| 207 |
wacom->dev->id.version = MODEL_CINTIQ2; |
| 208 |
} |
| 209 |
wacom->res_x = 508; |
| 210 |
wacom->res_y = 508; |
| 211 |
|
| 212 |
switch (wacom->data[5] << 8 | wacom->data[6]) { |
| 213 |
case 0x3731: /* PL-710 */ |
| 214 |
wacom->res_x = 2540; |
| 215 |
wacom->res_y = 2540; |
| 216 |
fallthrough; |
| 217 |
case 0x3535: /* PL-550 */ |
| 218 |
case 0x3830: /* PL-800 */ |
| 219 |
wacom->extra_z_bits = 2; |
| 220 |
} |
| 221 |
|
| 222 |
wacom->flags = F_COVERS_SCREEN; |
| 223 |
break; |
| 224 |
|
| 225 |
case MODEL_PENPARTNER: |
| 226 |
wacom->dev->name = "Wacom Penpartner"; |
| 227 |
wacom->dev->id.version = MODEL_PENPARTNER; |
| 228 |
wacom->res_x = 1000; |
| 229 |
wacom->res_y = 1000; |
| 230 |
break; |
| 231 |
|
| 232 |
case MODEL_GRAPHIRE: |
| 233 |
wacom->dev->name = "Wacom Graphire"; |
| 234 |
wacom->dev->id.version = MODEL_GRAPHIRE; |
| 235 |
wacom->res_x = 1016; |
| 236 |
wacom->res_y = 1016; |
| 237 |
wacom->max_x = 5103; |
| 238 |
wacom->max_y = 3711; |
| 239 |
wacom->extra_z_bits = 2; |
| 240 |
wacom->eraser_mask = 0x08; |
| 241 |
wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL; |
| 242 |
break; |
| 243 |
|
| 244 |
case MODEL_ARTPAD_II: |
| 245 |
case MODEL_DIGITIZER_II: |
| 246 |
wacom->dev->name = "Wacom Digitizer II"; |
| 247 |
wacom->dev->id.version = MODEL_DIGITIZER_II; |
| 248 |
if (major_v == 1 && minor_v <= 2) |
| 249 |
wacom->extra_z_bits = 0; /* UNTESTED */ |
| 250 |
break; |
| 251 |
|
| 252 |
default: |
| 253 |
dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n", |
| 254 |
wacom->data); |
| 255 |
wacom->result = -ENODEV; |
| 256 |
return; |
| 257 |
} |
| 258 |
|
| 259 |
dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n", |
| 260 |
wacom->dev->name, major_v, minor_v); |
| 261 |
} |
| 262 |
|
| 263 |
static void wacom_handle_configuration_response(struct wacom *wacom) |
| 264 |
{ |
| 265 |
int r, skip; |
| 266 |
|
| 267 |
dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data); |
| 268 |
r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip, |
| 269 |
&wacom->res_x, &wacom->res_y); |
| 270 |
if (r != 5) |
| 271 |
dev_warn(&wacom->dev->dev, "could not get resolution\n"); |
| 272 |
} |
| 273 |
|
| 274 |
static void wacom_handle_coordinates_response(struct wacom *wacom) |
| 275 |
{ |
| 276 |
int r; |
| 277 |
|
| 278 |
dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data); |
| 279 |
r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y); |
| 280 |
if (r != 2) |
| 281 |
dev_warn(&wacom->dev->dev, "could not get max coordinates\n"); |
| 282 |
} |
| 283 |
|
| 284 |
static void wacom_handle_response(struct wacom *wacom) |
| 285 |
{ |
| 286 |
if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) { |
| 287 |
dev_err(&wacom->dev->dev, |
| 288 |
"Wacom got an unexpected response: %s\n", wacom->data); |
| 289 |
wacom->result = -EIO; |
| 290 |
} else { |
| 291 |
wacom->result = 0; |
| 292 |
|
| 293 |
switch (wacom->data[1]) { |
| 294 |
case '#': |
| 295 |
wacom_handle_model_response(wacom); |
| 296 |
break; |
| 297 |
case 'R': |
| 298 |
wacom_handle_configuration_response(wacom); |
| 299 |
break; |
| 300 |
case 'C': |
| 301 |
wacom_handle_coordinates_response(wacom); |
| 302 |
break; |
| 303 |
} |
| 304 |
} |
| 305 |
|
| 306 |
complete(&wacom->cmd_done); |
| 307 |
} |
| 308 |
|
| 309 |
static void wacom_handle_packet(struct wacom *wacom) |
| 310 |
{ |
| 311 |
u8 in_proximity_p, stylus_p, button; |
| 312 |
unsigned int tool; |
| 313 |
int x, y, z; |
| 314 |
|
| 315 |
in_proximity_p = wacom->data[0] & 0x40; |
| 316 |
stylus_p = wacom->data[0] & 0x20; |
| 317 |
button = (wacom->data[3] & 0x78) >> 3; |
| 318 |
x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2]; |
| 319 |
y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5]; |
| 320 |
|
| 321 |
if (in_proximity_p && stylus_p) { |
| 322 |
z = wacom->data[6] & 0x7f; |
| 323 |
if (wacom->extra_z_bits >= 1) |
| 324 |
z = z << 1 | (wacom->data[3] & 0x4) >> 2; |
| 325 |
if (wacom->extra_z_bits > 1) |
| 326 |
z = z << 1 | (wacom->data[0] & 0x4) >> 2; |
| 327 |
z = z ^ (0x40 << wacom->extra_z_bits); |
| 328 |
} else { |
| 329 |
z = -1; |
| 330 |
} |
| 331 |
|
| 332 |
if (stylus_p) |
| 333 |
tool = (button & wacom->eraser_mask) ? ERASER : STYLUS; |
| 334 |
else |
| 335 |
tool = CURSOR; |
| 336 |
|
| 337 |
if (tool != wacom->tool && wacom->tool != 0) { |
| 338 |
input_report_key(wacom->dev, tools[wacom->tool].input_id, 0); |
| 339 |
input_sync(wacom->dev); |
| 340 |
} |
| 341 |
wacom->tool = tool; |
| 342 |
|
| 343 |
input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p); |
| 344 |
input_report_abs(wacom->dev, ABS_MISC, |
| 345 |
in_proximity_p ? tools[tool].device_id : 0); |
| 346 |
input_report_abs(wacom->dev, ABS_X, x); |
| 347 |
input_report_abs(wacom->dev, ABS_Y, y); |
| 348 |
input_report_abs(wacom->dev, ABS_PRESSURE, z); |
| 349 |
if (stylus_p) { |
| 350 |
input_report_key(wacom->dev, BTN_TOUCH, button & 1); |
| 351 |
input_report_key(wacom->dev, BTN_STYLUS, button & 2); |
| 352 |
input_report_key(wacom->dev, BTN_STYLUS2, button & 4); |
| 353 |
} else { |
| 354 |
input_report_key(wacom->dev, BTN_LEFT, button & 1); |
| 355 |
input_report_key(wacom->dev, BTN_RIGHT, button & 2); |
| 356 |
input_report_key(wacom->dev, BTN_MIDDLE, button & 4); |
| 357 |
/* handle relative wheel for non-stylus device */ |
| 358 |
z = (wacom->data[6] & 0x30) >> 4; |
| 359 |
if (wacom->data[6] & 0x40) |
| 360 |
z = -z; |
| 361 |
input_report_rel(wacom->dev, REL_WHEEL, z); |
| 362 |
} |
| 363 |
input_sync(wacom->dev); |
| 364 |
} |
| 365 |
|
| 366 |
static void wacom_clear_data_buf(struct wacom *wacom) |
| 367 |
{ |
| 368 |
memset(wacom->data, 0, DATA_SIZE); |
| 369 |
wacom->idx = 0; |
| 370 |
} |
| 371 |
|
| 372 |
static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data, |
| 373 |
unsigned int flags) |
| 374 |
{ |
| 375 |
struct wacom *wacom = serio_get_drvdata(serio); |
| 376 |
|
| 377 |
if (data & 0x80) |
| 378 |
wacom->idx = 0; |
| 379 |
|
| 380 |
/* |
| 381 |
* We're either expecting a carriage return-terminated ASCII |
| 382 |
* response string, or a seven-byte packet with the MSB set on |
| 383 |
* the first byte. |
| 384 |
* |
| 385 |
* Note however that some tablets (the PenPartner, for |
| 386 |
* example) don't send a carriage return at the end of a |
| 387 |
* command. We handle these by waiting for timeout. |
| 388 |
*/ |
| 389 |
if (data == '\r' && !(wacom->data[0] & 0x80)) { |
| 390 |
wacom_handle_response(wacom); |
| 391 |
wacom_clear_data_buf(wacom); |
| 392 |
return IRQ_HANDLED; |
| 393 |
} |
| 394 |
|
| 395 |
/* Leave place for 0 termination */ |
| 396 |
if (wacom->idx > (DATA_SIZE - 2)) { |
| 397 |
dev_dbg(&wacom->dev->dev, |
| 398 |
"throwing away %d bytes of garbage\n", wacom->idx); |
| 399 |
wacom_clear_data_buf(wacom); |
| 400 |
} |
| 401 |
wacom->data[wacom->idx++] = data; |
| 402 |
|
| 403 |
if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) { |
| 404 |
wacom_handle_packet(wacom); |
| 405 |
wacom_clear_data_buf(wacom); |
| 406 |
} |
| 407 |
|
| 408 |
return IRQ_HANDLED; |
| 409 |
} |
| 410 |
|
| 411 |
static void wacom_disconnect(struct serio *serio) |
| 412 |
{ |
| 413 |
struct wacom *wacom = serio_get_drvdata(serio); |
| 414 |
|
| 415 |
serio_close(serio); |
| 416 |
serio_set_drvdata(serio, NULL); |
| 417 |
input_unregister_device(wacom->dev); |
| 418 |
kfree(wacom); |
| 419 |
} |
| 420 |
|
| 421 |
static int wacom_send(struct serio *serio, const u8 *command) |
| 422 |
{ |
| 423 |
int err = 0; |
| 424 |
|
| 425 |
for (; !err && *command; command++) |
| 426 |
err = serio_write(serio, *command); |
| 427 |
|
| 428 |
return err; |
| 429 |
} |
| 430 |
|
| 431 |
static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio) |
| 432 |
{ |
| 433 |
const u8 *cmd; |
| 434 |
|
| 435 |
switch (wacom->dev->id.version) { |
| 436 |
case MODEL_CINTIQ: /* UNTESTED */ |
| 437 |
cmd = COMMAND_ORIGIN_IN_UPPER_LEFT |
| 438 |
COMMAND_TRANSMIT_AT_MAX_RATE |
| 439 |
COMMAND_ENABLE_CONTINUOUS_MODE |
| 440 |
COMMAND_START_SENDING_PACKETS; |
| 441 |
break; |
| 442 |
|
| 443 |
case MODEL_PENPARTNER: |
| 444 |
cmd = COMMAND_ENABLE_PRESSURE_MODE |
| 445 |
COMMAND_START_SENDING_PACKETS; |
| 446 |
break; |
| 447 |
|
| 448 |
default: |
| 449 |
cmd = COMMAND_MULTI_MODE_INPUT |
| 450 |
COMMAND_ORIGIN_IN_UPPER_LEFT |
| 451 |
COMMAND_ENABLE_ALL_MACRO_BUTTONS |
| 452 |
COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS |
| 453 |
COMMAND_TRANSMIT_AT_MAX_RATE |
| 454 |
COMMAND_DISABLE_INCREMENTAL_MODE |
| 455 |
COMMAND_ENABLE_CONTINUOUS_MODE |
| 456 |
COMMAND_Z_FILTER |
| 457 |
COMMAND_START_SENDING_PACKETS; |
| 458 |
break; |
| 459 |
} |
| 460 |
|
| 461 |
return wacom_send(serio, cmd); |
| 462 |
} |
| 463 |
|
| 464 |
static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio, |
| 465 |
const u8 *cmd, const char *desc) |
| 466 |
{ |
| 467 |
int err; |
| 468 |
unsigned long u; |
| 469 |
|
| 470 |
wacom->expect = cmd[1]; |
| 471 |
init_completion(&wacom->cmd_done); |
| 472 |
|
| 473 |
err = wacom_send(serio, cmd); |
| 474 |
if (err) |
| 475 |
return err; |
| 476 |
|
| 477 |
u = wait_for_completion_timeout(&wacom->cmd_done, HZ); |
| 478 |
if (u == 0) { |
| 479 |
/* Timeout, process what we've received. */ |
| 480 |
wacom_handle_response(wacom); |
| 481 |
} |
| 482 |
|
| 483 |
wacom->expect = 0; |
| 484 |
return wacom->result; |
| 485 |
} |
| 486 |
|
| 487 |
static int wacom_setup(struct wacom *wacom, struct serio *serio) |
| 488 |
{ |
| 489 |
int err; |
| 490 |
|
| 491 |
/* Note that setting the link speed is the job of inputattach. |
| 492 |
* We assume that reset negotiation has already happened, |
| 493 |
* here. */ |
| 494 |
err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION, |
| 495 |
"model and version"); |
| 496 |
if (err) |
| 497 |
return err; |
| 498 |
|
| 499 |
if (!(wacom->res_x && wacom->res_y)) { |
| 500 |
err = wacom_send_and_wait(wacom, serio, |
| 501 |
REQUEST_CONFIGURATION_STRING, |
| 502 |
"configuration string"); |
| 503 |
if (err) |
| 504 |
return err; |
| 505 |
} |
| 506 |
|
| 507 |
if (!(wacom->max_x && wacom->max_y)) { |
| 508 |
err = wacom_send_and_wait(wacom, serio, |
| 509 |
REQUEST_MAX_COORDINATES, |
| 510 |
"coordinates string"); |
| 511 |
if (err) |
| 512 |
return err; |
| 513 |
} |
| 514 |
|
| 515 |
return wacom_send_setup_string(wacom, serio); |
| 516 |
} |
| 517 |
|
| 518 |
static int wacom_connect(struct serio *serio, struct serio_driver *drv) |
| 519 |
{ |
| 520 |
struct wacom *wacom; |
| 521 |
struct input_dev *input_dev; |
| 522 |
int err = -ENOMEM; |
| 523 |
|
| 524 |
wacom = kzalloc_obj(*wacom); |
| 525 |
input_dev = input_allocate_device(); |
| 526 |
if (!wacom || !input_dev) |
| 527 |
goto free_device; |
| 528 |
|
| 529 |
wacom->dev = input_dev; |
| 530 |
wacom->extra_z_bits = 1; |
| 531 |
wacom->eraser_mask = 0x04; |
| 532 |
wacom->tool = wacom->idx = 0; |
| 533 |
snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys); |
| 534 |
input_dev->phys = wacom->phys; |
| 535 |
input_dev->id.bustype = BUS_RS232; |
| 536 |
input_dev->id.vendor = SERIO_WACOM_IV; |
| 537 |
input_dev->id.product = serio->id.extra; |
| 538 |
input_dev->dev.parent = &serio->dev; |
| 539 |
|
| 540 |
input_dev->evbit[0] = |
| 541 |
BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL); |
| 542 |
set_bit(ABS_MISC, input_dev->absbit); |
| 543 |
set_bit(BTN_TOOL_PEN, input_dev->keybit); |
| 544 |
set_bit(BTN_TOOL_RUBBER, input_dev->keybit); |
| 545 |
set_bit(BTN_TOOL_MOUSE, input_dev->keybit); |
| 546 |
set_bit(BTN_TOUCH, input_dev->keybit); |
| 547 |
set_bit(BTN_STYLUS, input_dev->keybit); |
| 548 |
set_bit(BTN_LEFT, input_dev->keybit); |
| 549 |
set_bit(BTN_RIGHT, input_dev->keybit); |
| 550 |
set_bit(BTN_MIDDLE, input_dev->keybit); |
| 551 |
|
| 552 |
serio_set_drvdata(serio, wacom); |
| 553 |
|
| 554 |
err = serio_open(serio, drv); |
| 555 |
if (err) |
| 556 |
goto free_device; |
| 557 |
|
| 558 |
err = wacom_setup(wacom, serio); |
| 559 |
if (err) |
| 560 |
goto close_serio; |
| 561 |
|
| 562 |
set_bit(INPUT_PROP_DIRECT, input_dev->propbit); |
| 563 |
if (!(wacom->flags & F_COVERS_SCREEN)) |
| 564 |
__set_bit(INPUT_PROP_POINTER, input_dev->propbit); |
| 565 |
|
| 566 |
if (wacom->flags & F_HAS_STYLUS2) |
| 567 |
__set_bit(BTN_STYLUS2, input_dev->keybit); |
| 568 |
|
| 569 |
if (wacom->flags & F_HAS_SCROLLWHEEL) |
| 570 |
__set_bit(REL_WHEEL, input_dev->relbit); |
| 571 |
|
| 572 |
input_abs_set_res(wacom->dev, ABS_X, wacom->res_x); |
| 573 |
input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y); |
| 574 |
input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0); |
| 575 |
input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0); |
| 576 |
input_set_abs_params(wacom->dev, ABS_PRESSURE, -1, |
| 577 |
(1 << (7 + wacom->extra_z_bits)) - 1, 0, 0); |
| 578 |
|
| 579 |
err = input_register_device(wacom->dev); |
| 580 |
if (err) |
| 581 |
goto close_serio; |
| 582 |
|
| 583 |
return 0; |
| 584 |
|
| 585 |
close_serio: |
| 586 |
serio_close(serio); |
| 587 |
free_device: |
| 588 |
serio_set_drvdata(serio, NULL); |
| 589 |
input_free_device(input_dev); |
| 590 |
kfree(wacom); |
| 591 |
return err; |
| 592 |
} |
| 593 |
|
| 594 |
static const struct serio_device_id wacom_serio_ids[] = { |
| 595 |
{ |
| 596 |
.type = SERIO_RS232, |
| 597 |
.proto = SERIO_WACOM_IV, |
| 598 |
.id = SERIO_ANY, |
| 599 |
.extra = SERIO_ANY, |
| 600 |
}, |
| 601 |
{ 0 } |
| 602 |
}; |
| 603 |
|
| 604 |
MODULE_DEVICE_TABLE(serio, wacom_serio_ids); |
| 605 |
|
| 606 |
static struct serio_driver wacom_drv = { |
| 607 |
.driver = { |
| 608 |
.name = "wacom_serial4", |
| 609 |
}, |
| 610 |
.description = "Wacom protocol 4 serial tablet driver", |
| 611 |
.id_table = wacom_serio_ids, |
| 612 |
.interrupt = wacom_interrupt, |
| 613 |
.connect = wacom_connect, |
| 614 |
.disconnect = wacom_disconnect, |
| 615 |
}; |
| 616 |
|
| 617 |
module_serio_driver(wacom_drv); |