| 1 |
# SPDX-License-Identifier: GPL-2.0 |
| 2 |
menuconfig COMEDI |
| 3 |
tristate "Data acquisition support (comedi)" |
| 4 |
help |
| 5 |
Enable support for a wide range of data acquisition devices |
| 6 |
for Linux. |
| 7 |
|
| 8 |
if COMEDI |
| 9 |
|
| 10 |
config COMEDI_DEBUG |
| 11 |
bool "Comedi debugging" |
| 12 |
help |
| 13 |
This is an option for use by developers; most people should |
| 14 |
say N here. This enables comedi core and driver debugging. |
| 15 |
|
| 16 |
config COMEDI_DEFAULT_BUF_SIZE_KB |
| 17 |
int "Comedi default initial asynchronous buffer size in KiB" |
| 18 |
default "2048" |
| 19 |
help |
| 20 |
This is the default asynchronous buffer size which is used for |
| 21 |
commands running in the background in kernel space. This |
| 22 |
defaults to 2048 KiB of memory so that a 16 channel card |
| 23 |
running at 10 kHz has of 2-4 seconds of buffer. |
| 24 |
|
| 25 |
config COMEDI_DEFAULT_BUF_MAXSIZE_KB |
| 26 |
int "Comedi default maximum asynchronous buffer size in KiB" |
| 27 |
default "20480" |
| 28 |
help |
| 29 |
This is the default maximum asynchronous buffer size which can |
| 30 |
be requested by a userspace program without root privileges. |
| 31 |
This is set to 20480 KiB so that a fast I/O card with 16 |
| 32 |
channels running at 100 kHz has 2-4 seconds of buffer. |
| 33 |
|
| 34 |
menuconfig COMEDI_MISC_DRIVERS |
| 35 |
bool "Comedi misc drivers" |
| 36 |
help |
| 37 |
Enable comedi misc drivers to be built |
| 38 |
|
| 39 |
Note that the answer to this question won't directly affect the |
| 40 |
kernel: saying N will just cause the configurator to skip all |
| 41 |
the questions about misc non-hardware comedi drivers. |
| 42 |
|
| 43 |
if COMEDI_MISC_DRIVERS |
| 44 |
|
| 45 |
config COMEDI_BOND |
| 46 |
tristate "Comedi device bonding support" |
| 47 |
select COMEDI_KCOMEDILIB |
| 48 |
help |
| 49 |
Enable support for a driver to 'bond' (merge) multiple subdevices |
| 50 |
from multiple devices together as one. |
| 51 |
|
| 52 |
Currently, it only handles digital I/O subdevices. |
| 53 |
|
| 54 |
To compile this driver as a module, choose M here: the module will be |
| 55 |
called comedi_bond. |
| 56 |
|
| 57 |
config COMEDI_TEST |
| 58 |
tristate "Fake waveform generator support" |
| 59 |
help |
| 60 |
Enable support for the fake waveform generator. |
| 61 |
This driver is mainly for testing purposes, but can also be used to |
| 62 |
generate sample waveforms on systems that don't have data acquisition |
| 63 |
hardware. |
| 64 |
|
| 65 |
To compile this driver as a module, choose M here: the module will be |
| 66 |
called comedi_test. |
| 67 |
|
| 68 |
config COMEDI_PARPORT |
| 69 |
tristate "Parallel port support" |
| 70 |
depends on HAS_IOPORT |
| 71 |
help |
| 72 |
Enable support for the standard parallel port. |
| 73 |
A cheap and easy way to get a few more digital I/O lines. Steal |
| 74 |
additional parallel ports from old computers or your neighbors' |
| 75 |
computers. |
| 76 |
|
| 77 |
To compile this driver as a module, choose M here: the module will be |
| 78 |
called comedi_parport. |
| 79 |
|
| 80 |
config COMEDI_SSV_DNP |
| 81 |
tristate "SSV Embedded Systems DIL/Net-PC support" |
| 82 |
depends on X86_32 || COMPILE_TEST |
| 83 |
depends on HAS_IOPORT |
| 84 |
help |
| 85 |
Enable support for SSV Embedded Systems DIL/Net-PC |
| 86 |
|
| 87 |
To compile this driver as a module, choose M here: the module will be |
| 88 |
called ssv_dnp. |
| 89 |
|
| 90 |
endif # COMEDI_MISC_DRIVERS |
| 91 |
|
| 92 |
menuconfig COMEDI_ISA_DRIVERS |
| 93 |
bool "Comedi ISA and PC/104 drivers" |
| 94 |
depends on ISA || ISA_BUS || PC104 |
| 95 |
depends on HAS_IOPORT |
| 96 |
help |
| 97 |
Enable comedi ISA and PC/104 drivers to be built |
| 98 |
|
| 99 |
Note that the answer to this question won't directly affect the |
| 100 |
kernel: saying N will just cause the configurator to skip all |
| 101 |
the questions about ISA and PC/104 comedi drivers. |
| 102 |
|
| 103 |
if COMEDI_ISA_DRIVERS |
| 104 |
|
| 105 |
config COMEDI_PCL711 |
| 106 |
tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" |
| 107 |
select COMEDI_8254 |
| 108 |
help |
| 109 |
Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112 |
| 110 |
|
| 111 |
To compile this driver as a module, choose M here: the module will be |
| 112 |
called pcl711. |
| 113 |
|
| 114 |
config COMEDI_PCL724 |
| 115 |
tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" |
| 116 |
select COMEDI_8255 |
| 117 |
help |
| 118 |
Enable support for ISA and PC/104 based 8255 digital i/o boards. This |
| 119 |
driver provides a legacy comedi driver wrapper for the generic 8255 |
| 120 |
support driver. |
| 121 |
|
| 122 |
Supported boards include: |
| 123 |
Advantech PCL-724 24 channels |
| 124 |
Advantech PCL-722 144 (or 96) channels |
| 125 |
Advantech PCL-731 48 channels |
| 126 |
ADlink ACL-7122 144 (or 96) channels |
| 127 |
ADlink ACL-7124 24 channels |
| 128 |
ADlink PET-48DIO 48 channels |
| 129 |
WinSystems PCM-IO48 48 channels (PC/104) |
| 130 |
Diamond Systems ONYX-MM-DIO 48 channels (PC/104) |
| 131 |
|
| 132 |
To compile this driver as a module, choose M here: the module will be |
| 133 |
called pcl724. |
| 134 |
|
| 135 |
config COMEDI_PCL726 |
| 136 |
tristate "Advantech PCL-726 and compatible ISA card support" |
| 137 |
help |
| 138 |
Enable support for Advantech PCL-726 and compatible ISA cards. |
| 139 |
|
| 140 |
To compile this driver as a module, choose M here: the module will be |
| 141 |
called pcl726. |
| 142 |
|
| 143 |
config COMEDI_PCL730 |
| 144 |
tristate "Simple Digital I/O board support (8-bit ports)" |
| 145 |
help |
| 146 |
Enable support for various simple ISA or PC/104 Digital I/O boards. |
| 147 |
These boards all use 8-bit I/O ports. |
| 148 |
|
| 149 |
Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out |
| 150 |
ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out |
| 151 |
ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out |
| 152 |
Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out |
| 153 |
Advantech PCL-725 iso - 8 in/8 out |
| 154 |
ICP P8R8-DIO iso - 8 in/8 out |
| 155 |
ADlink ACL-7225b iso - 16 in/16 out |
| 156 |
ICP P16R16-DIO iso - 16 in/16 out |
| 157 |
Advantech PCL-733 iso - 32 in |
| 158 |
Advantech PCL-734 iso - 32 out |
| 159 |
Diamond Systems OPMM-1616-XT iso - 16 in/16 out |
| 160 |
Diamond Systems PEARL-MM-P iso - 16 out |
| 161 |
Diamond Systems IR104-PBF iso - 20 in/20 out |
| 162 |
|
| 163 |
To compile this driver as a module, choose M here: the module will be |
| 164 |
called pcl730. |
| 165 |
|
| 166 |
config COMEDI_PCL812 |
| 167 |
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" |
| 168 |
select COMEDI_ISADMA if ISA_DMA_API |
| 169 |
select COMEDI_8254 |
| 170 |
help |
| 171 |
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink |
| 172 |
ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, |
| 173 |
A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards |
| 174 |
|
| 175 |
To compile this driver as a module, choose M here: the module will be |
| 176 |
called pcl812. |
| 177 |
|
| 178 |
config COMEDI_PCL816 |
| 179 |
tristate "Advantech PCL-814 and PCL-816 ISA card support" |
| 180 |
select COMEDI_ISADMA if ISA_DMA_API |
| 181 |
select COMEDI_8254 |
| 182 |
help |
| 183 |
Enable support for Advantech PCL-814 and PCL-816 ISA cards |
| 184 |
|
| 185 |
To compile this driver as a module, choose M here: the module will be |
| 186 |
called pcl816. |
| 187 |
|
| 188 |
config COMEDI_PCL818 |
| 189 |
tristate "Advantech PCL-718 and PCL-818 ISA card support" |
| 190 |
select COMEDI_ISADMA if ISA_DMA_API |
| 191 |
select COMEDI_8254 |
| 192 |
help |
| 193 |
Enable support for Advantech PCL-818 ISA cards |
| 194 |
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 |
| 195 |
|
| 196 |
To compile this driver as a module, choose M here: the module will be |
| 197 |
called pcl818. |
| 198 |
|
| 199 |
config COMEDI_PCM3724 |
| 200 |
tristate "Advantech PCM-3724 PC/104 card support" |
| 201 |
select COMEDI_8255 |
| 202 |
help |
| 203 |
Enable support for Advantech PCM-3724 PC/104 cards. |
| 204 |
|
| 205 |
To compile this driver as a module, choose M here: the module will be |
| 206 |
called pcm3724. |
| 207 |
|
| 208 |
config COMEDI_AMPLC_DIO200_ISA |
| 209 |
tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" |
| 210 |
select COMEDI_AMPLC_DIO200 |
| 211 |
help |
| 212 |
Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and |
| 213 |
PC272E ISA DIO boards |
| 214 |
|
| 215 |
To compile this driver as a module, choose M here: the module will be |
| 216 |
called amplc_dio200. |
| 217 |
|
| 218 |
config COMEDI_AMPLC_PC236_ISA |
| 219 |
tristate "Amplicon PC36AT DIO board support" |
| 220 |
select COMEDI_AMPLC_PC236 |
| 221 |
help |
| 222 |
Enable support for Amplicon PC36AT ISA DIO board. |
| 223 |
|
| 224 |
To compile this driver as a module, choose M here: the module will be |
| 225 |
called amplc_pc236. |
| 226 |
|
| 227 |
config COMEDI_AMPLC_PC263_ISA |
| 228 |
tristate "Amplicon PC263 relay board support" |
| 229 |
help |
| 230 |
Enable support for Amplicon PC263 ISA relay board. This board has |
| 231 |
16 reed relay output channels. |
| 232 |
|
| 233 |
To compile this driver as a module, choose M here: the module will be |
| 234 |
called amplc_pc263. |
| 235 |
|
| 236 |
config COMEDI_RTI800 |
| 237 |
tristate "Analog Devices RTI-800/815 ISA card support" |
| 238 |
help |
| 239 |
Enable support for Analog Devices RTI-800/815 ISA cards |
| 240 |
|
| 241 |
To compile this driver as a module, choose M here: the module will be |
| 242 |
called rti800. |
| 243 |
|
| 244 |
config COMEDI_RTI802 |
| 245 |
tristate "Analog Devices RTI-802 ISA card support" |
| 246 |
help |
| 247 |
Enable support for Analog Devices RTI-802 ISA cards |
| 248 |
|
| 249 |
To compile this driver as a module, choose M here: the module will be |
| 250 |
called rti802. |
| 251 |
|
| 252 |
config COMEDI_DAC02 |
| 253 |
tristate "Keithley Metrabyte DAC02 compatible ISA card support" |
| 254 |
help |
| 255 |
Enable support for Keithley Metrabyte DAC02 compatible ISA cards. |
| 256 |
|
| 257 |
To compile this driver as a module, choose M here: the module will be |
| 258 |
called dac02. |
| 259 |
|
| 260 |
config COMEDI_DAS16M1 |
| 261 |
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" |
| 262 |
select COMEDI_8254 |
| 263 |
select COMEDI_8255 |
| 264 |
help |
| 265 |
Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. |
| 266 |
|
| 267 |
To compile this driver as a module, choose M here: the module will be |
| 268 |
called das16m1. |
| 269 |
|
| 270 |
config COMEDI_DAS08_ISA |
| 271 |
tristate "DAS-08 compatible ISA and PC/104 card support" |
| 272 |
select COMEDI_DAS08 |
| 273 |
help |
| 274 |
Enable support for Keithley Metrabyte/ComputerBoards DAS08 |
| 275 |
and compatible ISA and PC/104 cards: |
| 276 |
Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH, |
| 277 |
DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO, |
| 278 |
DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16. |
| 279 |
|
| 280 |
To compile this driver as a module, choose M here: the module will be |
| 281 |
called das08_isa. |
| 282 |
|
| 283 |
config COMEDI_DAS16 |
| 284 |
tristate "DAS-16 compatible ISA and PC/104 card support" |
| 285 |
select COMEDI_ISADMA if ISA_DMA_API |
| 286 |
select COMEDI_8254 |
| 287 |
select COMEDI_8255 |
| 288 |
help |
| 289 |
Enable support for Keithley Metrabyte/ComputerBoards DAS16 |
| 290 |
and compatible ISA and PC/104 cards: |
| 291 |
Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202, |
| 292 |
DAS-1401, DAS-1402, DAS-1601, DAS-1602 and |
| 293 |
ComputerBoards/MeasurementComputing PC104-DAS16/JR/, |
| 294 |
PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12, |
| 295 |
CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12, |
| 296 |
CIO-DAS1602/16, CIO-DAS16/330 |
| 297 |
|
| 298 |
To compile this driver as a module, choose M here: the module will be |
| 299 |
called das16. |
| 300 |
|
| 301 |
config COMEDI_DAS800 |
| 302 |
tristate "DAS800 and compatible ISA card support" |
| 303 |
select COMEDI_8254 |
| 304 |
help |
| 305 |
Enable support for Keithley Metrabyte DAS800 and compatible ISA cards |
| 306 |
Keithley Metrabyte DAS-800, DAS-801, DAS-802 |
| 307 |
Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and |
| 308 |
CIO-DAS802/16 |
| 309 |
|
| 310 |
To compile this driver as a module, choose M here: the module will be |
| 311 |
called das800. |
| 312 |
|
| 313 |
config COMEDI_DAS1800 |
| 314 |
tristate "DAS1800 and compatible ISA card support" |
| 315 |
select COMEDI_ISADMA if ISA_DMA_API |
| 316 |
select COMEDI_8254 |
| 317 |
help |
| 318 |
Enable support for DAS1800 and compatible ISA cards |
| 319 |
Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO, |
| 320 |
DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO, |
| 321 |
DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST, |
| 322 |
DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and |
| 323 |
DAS-1802AO |
| 324 |
|
| 325 |
To compile this driver as a module, choose M here: the module will be |
| 326 |
called das1800. |
| 327 |
|
| 328 |
config COMEDI_DAS6402 |
| 329 |
tristate "DAS6402 and compatible ISA card support" |
| 330 |
select COMEDI_8254 |
| 331 |
help |
| 332 |
Enable support for DAS6402 and compatible ISA cards |
| 333 |
Computerboards, Keithley Metrabyte DAS6402 and compatibles |
| 334 |
|
| 335 |
To compile this driver as a module, choose M here: the module will be |
| 336 |
called das6402. |
| 337 |
|
| 338 |
config COMEDI_DT2801 |
| 339 |
tristate "Data Translation DT2801 ISA card support" |
| 340 |
help |
| 341 |
Enable support for Data Translation DT2801 ISA cards |
| 342 |
|
| 343 |
To compile this driver as a module, choose M here: the module will be |
| 344 |
called dt2801. |
| 345 |
|
| 346 |
config COMEDI_DT2811 |
| 347 |
tristate "Data Translation DT2811 ISA card support" |
| 348 |
help |
| 349 |
Enable support for Data Translation DT2811 ISA cards |
| 350 |
|
| 351 |
To compile this driver as a module, choose M here: the module will be |
| 352 |
called dt2811. |
| 353 |
|
| 354 |
config COMEDI_DT2814 |
| 355 |
tristate "Data Translation DT2814 ISA card support" |
| 356 |
help |
| 357 |
Enable support for Data Translation DT2814 ISA cards |
| 358 |
|
| 359 |
To compile this driver as a module, choose M here: the module will be |
| 360 |
called dt2814. |
| 361 |
|
| 362 |
config COMEDI_DT2815 |
| 363 |
tristate "Data Translation DT2815 ISA card support" |
| 364 |
help |
| 365 |
Enable support for Data Translation DT2815 ISA cards |
| 366 |
|
| 367 |
To compile this driver as a module, choose M here: the module will be |
| 368 |
called dt2815. |
| 369 |
|
| 370 |
config COMEDI_DT2817 |
| 371 |
tristate "Data Translation DT2817 ISA card support" |
| 372 |
help |
| 373 |
Enable support for Data Translation DT2817 ISA cards |
| 374 |
|
| 375 |
To compile this driver as a module, choose M here: the module will be |
| 376 |
called dt2817. |
| 377 |
|
| 378 |
config COMEDI_DT282X |
| 379 |
tristate "Data Translation DT2821 series and DT-EZ ISA card support" |
| 380 |
select COMEDI_ISADMA if ISA_DMA_API |
| 381 |
help |
| 382 |
Enable support for Data Translation DT2821 series including DT-EZ |
| 383 |
DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI, |
| 384 |
DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828, |
| 385 |
DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL |
| 386 |
|
| 387 |
To compile this driver as a module, choose M here: the module will be |
| 388 |
called dt282x. |
| 389 |
|
| 390 |
config COMEDI_DMM32AT |
| 391 |
tristate "Diamond Systems MM-32-AT PC/104 board support" |
| 392 |
select COMEDI_8255 |
| 393 |
help |
| 394 |
Enable support for Diamond Systems MM-32-AT PC/104 boards |
| 395 |
|
| 396 |
To compile this driver as a module, choose M here: the module will be |
| 397 |
called dmm32at. |
| 398 |
|
| 399 |
config COMEDI_FL512 |
| 400 |
tristate "FL512 ISA card support" |
| 401 |
help |
| 402 |
Enable support for FL512 ISA card |
| 403 |
|
| 404 |
To compile this driver as a module, choose M here: the module will be |
| 405 |
called fl512. |
| 406 |
|
| 407 |
config COMEDI_AIO_AIO12_8 |
| 408 |
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" |
| 409 |
select COMEDI_8254 |
| 410 |
select COMEDI_8255 |
| 411 |
help |
| 412 |
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board |
| 413 |
|
| 414 |
To compile this driver as a module, choose M here: the module will be |
| 415 |
called aio_aio12_8. |
| 416 |
|
| 417 |
config COMEDI_AIO_IIRO_16 |
| 418 |
tristate "I/O Products PC/104 IIRO16 Board support" |
| 419 |
help |
| 420 |
Enable support for I/O Products PC/104 IIRO16 Relay And Isolated |
| 421 |
Input Board |
| 422 |
|
| 423 |
To compile this driver as a module, choose M here: the module will be |
| 424 |
called aio_iiro_16. |
| 425 |
|
| 426 |
config COMEDI_II_PCI20KC |
| 427 |
tristate "Intelligent Instruments PCI-20001C carrier support" |
| 428 |
depends on HAS_IOMEM |
| 429 |
help |
| 430 |
Enable support for Intelligent Instruments PCI-20001C carrier |
| 431 |
PCI-20001, PCI-20006 and PCI-20341 |
| 432 |
|
| 433 |
To compile this driver as a module, choose M here: the module will be |
| 434 |
called ii_pci20kc. |
| 435 |
|
| 436 |
config COMEDI_C6XDIGIO |
| 437 |
tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" |
| 438 |
help |
| 439 |
Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter |
| 440 |
card |
| 441 |
|
| 442 |
To compile this driver as a module, choose M here: the module will be |
| 443 |
called c6xdigio. |
| 444 |
|
| 445 |
config COMEDI_MPC624 |
| 446 |
tristate "Micro/sys MPC-624 PC/104 board support" |
| 447 |
help |
| 448 |
Enable support for Micro/sys MPC-624 PC/104 board |
| 449 |
|
| 450 |
To compile this driver as a module, choose M here: the module will be |
| 451 |
called mpc624. |
| 452 |
|
| 453 |
config COMEDI_ADQ12B |
| 454 |
tristate "MicroAxial ADQ12-B data acquisition and control card support" |
| 455 |
help |
| 456 |
Enable MicroAxial ADQ12-B daq and control card support. |
| 457 |
|
| 458 |
To compile this driver as a module, choose M here: the module will be |
| 459 |
called adq12b. |
| 460 |
|
| 461 |
config COMEDI_NI_AT_A2150 |
| 462 |
tristate "NI AT-A2150 ISA card support" |
| 463 |
select COMEDI_ISADMA if ISA_DMA_API |
| 464 |
select COMEDI_8254 |
| 465 |
help |
| 466 |
Enable support for National Instruments AT-A2150 cards |
| 467 |
|
| 468 |
To compile this driver as a module, choose M here: the module will be |
| 469 |
called ni_at_a2150. |
| 470 |
|
| 471 |
config COMEDI_NI_AT_AO |
| 472 |
tristate "NI AT-AO-6/10 EISA card support" |
| 473 |
select COMEDI_8254 |
| 474 |
help |
| 475 |
Enable support for National Instruments AT-AO-6/10 cards |
| 476 |
|
| 477 |
To compile this driver as a module, choose M here: the module will be |
| 478 |
called ni_at_ao. |
| 479 |
|
| 480 |
config COMEDI_NI_ATMIO |
| 481 |
tristate "NI AT-MIO E series ISA-PNP card support" |
| 482 |
select COMEDI_8255 |
| 483 |
select COMEDI_NI_TIO |
| 484 |
help |
| 485 |
Enable support for National Instruments AT-MIO E series cards |
| 486 |
National Instruments AT-MIO-16E-1 (ni_atmio), |
| 487 |
AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, |
| 488 |
AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 |
| 489 |
|
| 490 |
To compile this driver as a module, choose M here: the module will be |
| 491 |
called ni_atmio. |
| 492 |
|
| 493 |
config COMEDI_NI_ATMIO16D |
| 494 |
tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support" |
| 495 |
select COMEDI_8255 |
| 496 |
help |
| 497 |
Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards. |
| 498 |
|
| 499 |
To compile this driver as a module, choose M here: the module will be |
| 500 |
called ni_atmio16d. |
| 501 |
|
| 502 |
config COMEDI_NI_LABPC_ISA |
| 503 |
tristate "NI Lab-PC and compatibles ISA support" |
| 504 |
select COMEDI_NI_LABPC |
| 505 |
help |
| 506 |
Enable support for National Instruments Lab-PC and compatibles |
| 507 |
Lab-PC-1200, Lab-PC-1200AI, Lab-PC+. |
| 508 |
Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has |
| 509 |
not yet been added to the driver. |
| 510 |
|
| 511 |
To compile this driver as a module, choose M here: the module will be |
| 512 |
called ni_labpc. |
| 513 |
|
| 514 |
config COMEDI_PCMAD |
| 515 |
tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support" |
| 516 |
help |
| 517 |
Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards. |
| 518 |
|
| 519 |
To compile this driver as a module, choose M here: the module will be |
| 520 |
called pcmad. |
| 521 |
|
| 522 |
config COMEDI_PCMDA12 |
| 523 |
tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support" |
| 524 |
help |
| 525 |
Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards. |
| 526 |
Note that the board is not ISA-PNP capable and thus needs the I/O |
| 527 |
port comedi_config parameter. |
| 528 |
|
| 529 |
To compile this driver as a module, choose M here: the module will be |
| 530 |
called pcmda12. |
| 531 |
|
| 532 |
config COMEDI_PCMMIO |
| 533 |
tristate "Winsystems PCM-MIO PC/104 board support" |
| 534 |
help |
| 535 |
Enable support for Winsystems PCM-MIO multifunction PC/104 boards. |
| 536 |
|
| 537 |
To compile this driver as a module, choose M here: the module will be |
| 538 |
called pcmmio. |
| 539 |
|
| 540 |
config COMEDI_PCMUIO |
| 541 |
tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support" |
| 542 |
help |
| 543 |
Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards. |
| 544 |
|
| 545 |
To compile this driver as a module, choose M here: the module will be |
| 546 |
called pcmuio. |
| 547 |
|
| 548 |
config COMEDI_MULTIQ3 |
| 549 |
tristate "Quanser Consulting MultiQ-3 ISA card support" |
| 550 |
help |
| 551 |
Enable support for Quanser Consulting MultiQ-3 ISA cards |
| 552 |
|
| 553 |
To compile this driver as a module, choose M here: the module will be |
| 554 |
called multiq3. |
| 555 |
|
| 556 |
config COMEDI_S526 |
| 557 |
tristate "Sensoray s526 support" |
| 558 |
help |
| 559 |
Enable support for Sensoray s526 |
| 560 |
|
| 561 |
To compile this driver as a module, choose M here: the module will be |
| 562 |
called s526. |
| 563 |
|
| 564 |
endif # COMEDI_ISA_DRIVERS |
| 565 |
|
| 566 |
menuconfig COMEDI_PCI_DRIVERS |
| 567 |
tristate "Comedi PCI drivers" |
| 568 |
depends on PCI |
| 569 |
help |
| 570 |
Enable support for comedi PCI drivers. |
| 571 |
|
| 572 |
To compile this support as a module, choose M here: the module will |
| 573 |
be called comedi_pci. |
| 574 |
|
| 575 |
if COMEDI_PCI_DRIVERS |
| 576 |
|
| 577 |
config COMEDI_8255_PCI |
| 578 |
tristate "Generic PCI based 8255 digital i/o board support" |
| 579 |
select COMEDI_8255 |
| 580 |
help |
| 581 |
Enable support for PCI based 8255 digital i/o boards. This driver |
| 582 |
provides a PCI wrapper around the generic 8255 driver. |
| 583 |
|
| 584 |
Supported boards: |
| 585 |
ADlink - PCI-7224, PCI-7248, and PCI-7296 |
| 586 |
Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and |
| 587 |
PCI-DIO96H |
| 588 |
National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, |
| 589 |
PCI-6503B, PCI-6503X, and PXI-6503 |
| 590 |
|
| 591 |
To compile this driver as a module, choose M here: the module will |
| 592 |
be called 8255_pci. |
| 593 |
|
| 594 |
config COMEDI_ADDI_WATCHDOG |
| 595 |
tristate |
| 596 |
depends on HAS_IOPORT |
| 597 |
help |
| 598 |
Provides support for the watchdog subdevice found on many ADDI-DATA |
| 599 |
boards. This module will be automatically selected when needed. The |
| 600 |
module will be called addi_watchdog. |
| 601 |
|
| 602 |
config COMEDI_ADDI_APCI_1032 |
| 603 |
tristate "ADDI-DATA APCI_1032 support" |
| 604 |
depends on HAS_IOPORT |
| 605 |
help |
| 606 |
Enable support for ADDI-DATA APCI_1032 cards |
| 607 |
|
| 608 |
To compile this driver as a module, choose M here: the module will be |
| 609 |
called addi_apci_1032. |
| 610 |
|
| 611 |
config COMEDI_ADDI_APCI_1500 |
| 612 |
tristate "ADDI-DATA APCI_1500 support" |
| 613 |
depends on HAS_IOPORT |
| 614 |
help |
| 615 |
Enable support for ADDI-DATA APCI_1500 cards |
| 616 |
|
| 617 |
To compile this driver as a module, choose M here: the module will be |
| 618 |
called addi_apci_1500. |
| 619 |
|
| 620 |
config COMEDI_ADDI_APCI_1516 |
| 621 |
tristate "ADDI-DATA APCI-1016/1516/2016 support" |
| 622 |
depends on HAS_IOPORT |
| 623 |
select COMEDI_ADDI_WATCHDOG |
| 624 |
help |
| 625 |
Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards. |
| 626 |
These are 16 channel, optically isolated, digital I/O boards. The 1516 |
| 627 |
and 2016 boards also have a watchdog for resetting the outputs to "0". |
| 628 |
|
| 629 |
To compile this driver as a module, choose M here: the module will be |
| 630 |
called addi_apci_1516. |
| 631 |
|
| 632 |
config COMEDI_ADDI_APCI_1564 |
| 633 |
tristate "ADDI-DATA APCI_1564 support" |
| 634 |
depends on HAS_IOPORT |
| 635 |
select COMEDI_ADDI_WATCHDOG |
| 636 |
help |
| 637 |
Enable support for ADDI-DATA APCI_1564 cards |
| 638 |
|
| 639 |
To compile this driver as a module, choose M here: the module will be |
| 640 |
called addi_apci_1564. |
| 641 |
|
| 642 |
config COMEDI_ADDI_APCI_16XX |
| 643 |
tristate "ADDI-DATA APCI_16xx support" |
| 644 |
depends on HAS_IOPORT |
| 645 |
help |
| 646 |
Enable support for ADDI-DATA APCI_16xx cards |
| 647 |
|
| 648 |
To compile this driver as a module, choose M here: the module will be |
| 649 |
called addi_apci_16xx. |
| 650 |
|
| 651 |
config COMEDI_ADDI_APCI_2032 |
| 652 |
tristate "ADDI-DATA APCI_2032 support" |
| 653 |
depends on HAS_IOPORT |
| 654 |
select COMEDI_ADDI_WATCHDOG |
| 655 |
help |
| 656 |
Enable support for ADDI-DATA APCI_2032 cards |
| 657 |
|
| 658 |
To compile this driver as a module, choose M here: the module will be |
| 659 |
called addi_apci_2032. |
| 660 |
|
| 661 |
config COMEDI_ADDI_APCI_2200 |
| 662 |
tristate "ADDI-DATA APCI_2200 support" |
| 663 |
depends on HAS_IOPORT |
| 664 |
select COMEDI_ADDI_WATCHDOG |
| 665 |
help |
| 666 |
Enable support for ADDI-DATA APCI_2200 cards |
| 667 |
|
| 668 |
To compile this driver as a module, choose M here: the module will be |
| 669 |
called addi_apci_2200. |
| 670 |
|
| 671 |
config COMEDI_ADDI_APCI_3120 |
| 672 |
tristate "ADDI-DATA APCI_3120/3001 support" |
| 673 |
depends on HAS_IOPORT |
| 674 |
depends on HAS_DMA |
| 675 |
help |
| 676 |
Enable support for ADDI-DATA APCI_3120/3001 cards |
| 677 |
|
| 678 |
To compile this driver as a module, choose M here: the module will be |
| 679 |
called addi_apci_3120. |
| 680 |
|
| 681 |
config COMEDI_ADDI_APCI_3501 |
| 682 |
tristate "ADDI-DATA APCI_3501 support" |
| 683 |
depends on HAS_IOPORT |
| 684 |
help |
| 685 |
Enable support for ADDI-DATA APCI_3501 cards |
| 686 |
|
| 687 |
To compile this driver as a module, choose M here: the module will be |
| 688 |
called addi_apci_3501. |
| 689 |
|
| 690 |
config COMEDI_ADDI_APCI_3XXX |
| 691 |
tristate "ADDI-DATA APCI_3xxx support" |
| 692 |
depends on HAS_IOPORT |
| 693 |
help |
| 694 |
Enable support for ADDI-DATA APCI_3xxx cards |
| 695 |
|
| 696 |
To compile this driver as a module, choose M here: the module will be |
| 697 |
called addi_apci_3xxx. |
| 698 |
|
| 699 |
config COMEDI_ADL_PCI6208 |
| 700 |
tristate "ADLink PCI-6208A support" |
| 701 |
depends on HAS_IOPORT |
| 702 |
help |
| 703 |
Enable support for ADLink PCI-6208A cards |
| 704 |
|
| 705 |
To compile this driver as a module, choose M here: the module will be |
| 706 |
called adl_pci6208. |
| 707 |
|
| 708 |
config COMEDI_ADL_PCI7250 |
| 709 |
tristate "ADLink PCI-7250 support" |
| 710 |
help |
| 711 |
Enable support for ADLink PCI-7250/LPCI-7250/LPCIe-7250 relay output |
| 712 |
and isolated digital input boards. |
| 713 |
|
| 714 |
To compile this driver as a module, choose M here: the module will be |
| 715 |
called adl_pci7250. |
| 716 |
|
| 717 |
config COMEDI_ADL_PCI7X3X |
| 718 |
tristate "ADLink PCI-723X/743X isolated digital i/o board support" |
| 719 |
depends on HAS_IOPORT |
| 720 |
help |
| 721 |
Enable support for ADlink PCI-723X/743X isolated digital i/o boards. |
| 722 |
Supported boards include the 32-channel PCI-7230 (16 in/16 out), |
| 723 |
PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel |
| 724 |
PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out). |
| 725 |
|
| 726 |
To compile this driver as a module, choose M here: the module will be |
| 727 |
called adl_pci7x3x. |
| 728 |
|
| 729 |
config COMEDI_ADL_PCI8164 |
| 730 |
tristate "ADLink PCI-8164 4 Axes Motion Control board support" |
| 731 |
depends on HAS_IOPORT |
| 732 |
help |
| 733 |
Enable support for ADlink PCI-8164 4 Axes Motion Control board |
| 734 |
|
| 735 |
To compile this driver as a module, choose M here: the module will be |
| 736 |
called adl_pci8164. |
| 737 |
|
| 738 |
config COMEDI_ADL_PCI9111 |
| 739 |
tristate "ADLink PCI-9111HR support" |
| 740 |
depends on HAS_IOPORT |
| 741 |
select COMEDI_8254 |
| 742 |
help |
| 743 |
Enable support for ADlink PCI9111 cards |
| 744 |
|
| 745 |
To compile this driver as a module, choose M here: the module will be |
| 746 |
called adl_pci9111. |
| 747 |
|
| 748 |
config COMEDI_ADL_PCI9118 |
| 749 |
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" |
| 750 |
depends on HAS_IOPORT |
| 751 |
depends on HAS_DMA |
| 752 |
select COMEDI_8254 |
| 753 |
help |
| 754 |
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards |
| 755 |
|
| 756 |
To compile this driver as a module, choose M here: the module will be |
| 757 |
called adl_pci9118. |
| 758 |
|
| 759 |
config COMEDI_ADV_PCI1710 |
| 760 |
tristate "Advantech PCI-171x and PCI-1731 support" |
| 761 |
depends on HAS_IOPORT |
| 762 |
select COMEDI_8254 |
| 763 |
help |
| 764 |
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, |
| 765 |
PCI-1713 and PCI-1731 |
| 766 |
|
| 767 |
To compile this driver as a module, choose M here: the module will be |
| 768 |
called adv_pci1710. |
| 769 |
|
| 770 |
config COMEDI_ADV_PCI1720 |
| 771 |
tristate "Advantech PCI-1720 support" |
| 772 |
depends on HAS_IOPORT |
| 773 |
help |
| 774 |
Enable support for Advantech PCI-1720 Analog Output board. |
| 775 |
|
| 776 |
To compile this driver as a module, choose M here: the module will be |
| 777 |
called adv_pci1720. |
| 778 |
|
| 779 |
config COMEDI_ADV_PCI1723 |
| 780 |
tristate "Advantech PCI-1723 support" |
| 781 |
depends on HAS_IOPORT |
| 782 |
help |
| 783 |
Enable support for Advantech PCI-1723 cards |
| 784 |
|
| 785 |
To compile this driver as a module, choose M here: the module will be |
| 786 |
called adv_pci1723. |
| 787 |
|
| 788 |
config COMEDI_ADV_PCI1724 |
| 789 |
tristate "Advantech PCI-1724U support" |
| 790 |
depends on HAS_IOPORT |
| 791 |
help |
| 792 |
Enable support for Advantech PCI-1724U cards. These are 32-channel |
| 793 |
analog output cards with voltage and current loop output ranges and |
| 794 |
14-bit resolution. |
| 795 |
|
| 796 |
To compile this driver as a module, choose M here: the module will be |
| 797 |
called adv_pci1724. |
| 798 |
|
| 799 |
config COMEDI_ADV_PCI1760 |
| 800 |
tristate "Advantech PCI-1760 support" |
| 801 |
depends on HAS_IOPORT |
| 802 |
help |
| 803 |
Enable support for Advantech PCI-1760 board. |
| 804 |
|
| 805 |
To compile this driver as a module, choose M here: the module will be |
| 806 |
called adv_pci1760. |
| 807 |
|
| 808 |
config COMEDI_ADV_PCI_DIO |
| 809 |
tristate "Advantech PCI DIO card support" |
| 810 |
depends on HAS_IOPORT |
| 811 |
select COMEDI_8254 |
| 812 |
select COMEDI_8255 |
| 813 |
help |
| 814 |
Enable support for Advantech PCI DIO cards |
| 815 |
PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U, |
| 816 |
PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756, |
| 817 |
PCI-1761 and PCI-1762 |
| 818 |
|
| 819 |
To compile this driver as a module, choose M here: the module will be |
| 820 |
called adv_pci_dio. |
| 821 |
|
| 822 |
config COMEDI_AMPLC_DIO200_PCI |
| 823 |
tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support" |
| 824 |
select COMEDI_AMPLC_DIO200 |
| 825 |
help |
| 826 |
Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236 |
| 827 |
and PCIe296 DIO boards. |
| 828 |
|
| 829 |
To compile this driver as a module, choose M here: the module will be |
| 830 |
called amplc_dio200_pci. |
| 831 |
|
| 832 |
config COMEDI_AMPLC_PC236_PCI |
| 833 |
tristate "Amplicon PCI236 DIO board support" |
| 834 |
depends on HAS_IOPORT |
| 835 |
select COMEDI_AMPLC_PC236 |
| 836 |
help |
| 837 |
Enable support for Amplicon PCI236 DIO board. |
| 838 |
|
| 839 |
To compile this driver as a module, choose M here: the module will be |
| 840 |
called amplc_pci236. |
| 841 |
|
| 842 |
config COMEDI_AMPLC_PC263_PCI |
| 843 |
tristate "Amplicon PCI263 relay board support" |
| 844 |
depends on HAS_IOPORT |
| 845 |
help |
| 846 |
Enable support for Amplicon PCI263 relay board. This is a PCI board |
| 847 |
with 16 reed relay output channels. |
| 848 |
|
| 849 |
To compile this driver as a module, choose M here: the module will be |
| 850 |
called amplc_pci263. |
| 851 |
|
| 852 |
config COMEDI_AMPLC_PCI224 |
| 853 |
tristate "Amplicon PCI224 and PCI234 support" |
| 854 |
depends on HAS_IOPORT |
| 855 |
select COMEDI_8254 |
| 856 |
help |
| 857 |
Enable support for Amplicon PCI224 and PCI234 AO boards |
| 858 |
|
| 859 |
To compile this driver as a module, choose M here: the module will be |
| 860 |
called amplc_pci224. |
| 861 |
|
| 862 |
config COMEDI_AMPLC_PCI230 |
| 863 |
tristate "Amplicon PCI230 and PCI260 support" |
| 864 |
depends on HAS_IOPORT |
| 865 |
select COMEDI_8254 |
| 866 |
select COMEDI_8255 |
| 867 |
help |
| 868 |
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O |
| 869 |
boards |
| 870 |
|
| 871 |
To compile this driver as a module, choose M here: the module will be |
| 872 |
called amplc_pci230. |
| 873 |
|
| 874 |
config COMEDI_CONTEC_PCI_DIO |
| 875 |
tristate "Contec PIO1616L digital I/O board support" |
| 876 |
depends on HAS_IOPORT |
| 877 |
help |
| 878 |
Enable support for the Contec PIO1616L digital I/O board |
| 879 |
|
| 880 |
To compile this driver as a module, choose M here: the module will be |
| 881 |
called contec_pci_dio. |
| 882 |
|
| 883 |
config COMEDI_DAS08_PCI |
| 884 |
tristate "DAS-08 PCI support" |
| 885 |
depends on HAS_IOPORT |
| 886 |
select COMEDI_DAS08 |
| 887 |
help |
| 888 |
Enable support for PCI DAS-08 cards. |
| 889 |
|
| 890 |
To compile this driver as a module, choose M here: the module will be |
| 891 |
called das08_pci. |
| 892 |
|
| 893 |
config COMEDI_DT3000 |
| 894 |
tristate "Data Translation DT3000 series support" |
| 895 |
help |
| 896 |
Enable support for Data Translation DT3000 series |
| 897 |
DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and |
| 898 |
DT3004-200 |
| 899 |
|
| 900 |
To compile this driver as a module, choose M here: the module will be |
| 901 |
called dt3000. |
| 902 |
|
| 903 |
config COMEDI_DYNA_PCI10XX |
| 904 |
tristate "Dynalog PCI DAQ series support" |
| 905 |
depends on HAS_IOPORT |
| 906 |
help |
| 907 |
Enable support for Dynalog PCI DAQ series |
| 908 |
PCI-1050 |
| 909 |
|
| 910 |
To compile this driver as a module, choose M here: the module will be |
| 911 |
called dyna_pci10xx. |
| 912 |
|
| 913 |
config COMEDI_GSC_HPDI |
| 914 |
tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" |
| 915 |
help |
| 916 |
Enable support for General Standards Corporation high speed parallel |
| 917 |
digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32. |
| 918 |
Only receive mode works, transmit not supported. |
| 919 |
|
| 920 |
To compile this driver as a module, choose M here: the module will be |
| 921 |
called gsc_hpdi. |
| 922 |
|
| 923 |
config COMEDI_MF6X4 |
| 924 |
tristate "Humusoft MF634 and MF624 DAQ Card support" |
| 925 |
help |
| 926 |
This driver supports both Humusoft MF634 and MF624 Data acquisition |
| 927 |
cards. The legacy Humusoft MF614 card is not supported. |
| 928 |
|
| 929 |
config COMEDI_ICP_MULTI |
| 930 |
tristate "Inova ICP_MULTI support" |
| 931 |
help |
| 932 |
Enable support for Inova ICP_MULTI card |
| 933 |
|
| 934 |
To compile this driver as a module, choose M here: the module will be |
| 935 |
called icp_multi. |
| 936 |
|
| 937 |
config COMEDI_DAQBOARD2000 |
| 938 |
tristate "IOtech DAQboard/2000 support" |
| 939 |
select COMEDI_8255 |
| 940 |
help |
| 941 |
Enable support for the IOtech DAQboard/2000 |
| 942 |
|
| 943 |
To compile this driver as a module, choose M here: the module will be |
| 944 |
called daqboard2000. |
| 945 |
|
| 946 |
config COMEDI_JR3_PCI |
| 947 |
tristate "JR3/PCI force sensor board support" |
| 948 |
help |
| 949 |
Enable support for JR3/PCI force sensor boards |
| 950 |
|
| 951 |
To compile this driver as a module, choose M here: the module will be |
| 952 |
called jr3_pci. |
| 953 |
|
| 954 |
config COMEDI_KE_COUNTER |
| 955 |
tristate "Kolter-Electronic PCI Counter 1 card support" |
| 956 |
depends on HAS_IOPORT |
| 957 |
help |
| 958 |
Enable support for Kolter-Electronic PCI Counter 1 cards |
| 959 |
|
| 960 |
To compile this driver as a module, choose M here: the module will be |
| 961 |
called ke_counter. |
| 962 |
|
| 963 |
config COMEDI_CB_PCIDAS64 |
| 964 |
tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" |
| 965 |
select COMEDI_8255 |
| 966 |
help |
| 967 |
Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx, |
| 968 |
60xx, and 4020 series with the PLX 9080 PCI controller |
| 969 |
|
| 970 |
To compile this driver as a module, choose M here: the module will be |
| 971 |
called cb_pcidas64. |
| 972 |
|
| 973 |
config COMEDI_CB_PCIDAS |
| 974 |
tristate "MeasurementComputing PCI-DAS support" |
| 975 |
depends on HAS_IOPORT |
| 976 |
select COMEDI_8254 |
| 977 |
select COMEDI_8255 |
| 978 |
help |
| 979 |
Enable support for ComputerBoards/MeasurementComputing PCI-DAS with |
| 980 |
AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr, |
| 981 |
PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001 |
| 982 |
and PCI_DAS1002. |
| 983 |
|
| 984 |
To compile this driver as a module, choose M here: the module will be |
| 985 |
called cb_pcidas. |
| 986 |
|
| 987 |
config COMEDI_CB_PCIDDA |
| 988 |
tristate "MeasurementComputing PCI-DDA series support" |
| 989 |
depends on HAS_IOPORT |
| 990 |
select COMEDI_8255 |
| 991 |
help |
| 992 |
Enable support for ComputerBoards/MeasurementComputing PCI-DDA |
| 993 |
series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16, |
| 994 |
PCI-DDA04/16 and PCI-DDA02/16 |
| 995 |
|
| 996 |
To compile this driver as a module, choose M here: the module will be |
| 997 |
called cb_pcidda. |
| 998 |
|
| 999 |
config COMEDI_CB_PCIMDAS |
| 1000 |
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support" |
| 1001 |
depends on HAS_IOPORT |
| 1002 |
select COMEDI_8254 |
| 1003 |
select COMEDI_8255 |
| 1004 |
help |
| 1005 |
Enable support for ComputerBoards/MeasurementComputing PCI Migration |
| 1006 |
series PCIM-DAS1602/16 and PCIe-DAS1602/16. |
| 1007 |
|
| 1008 |
To compile this driver as a module, choose M here: the module will be |
| 1009 |
called cb_pcimdas. |
| 1010 |
|
| 1011 |
config COMEDI_CB_PCIMDDA |
| 1012 |
tristate "MeasurementComputing PCIM-DDA06-16 support" |
| 1013 |
depends on HAS_IOPORT |
| 1014 |
select COMEDI_8255 |
| 1015 |
help |
| 1016 |
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 |
| 1017 |
|
| 1018 |
To compile this driver as a module, choose M here: the module will be |
| 1019 |
called cb_pcimdda. |
| 1020 |
|
| 1021 |
config COMEDI_ME4000 |
| 1022 |
tristate "Meilhaus ME-4000 support" |
| 1023 |
depends on HAS_IOPORT |
| 1024 |
select COMEDI_8254 |
| 1025 |
help |
| 1026 |
Enable support for Meilhaus PCI data acquisition cards |
| 1027 |
ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is |
| 1028 |
|
| 1029 |
To compile this driver as a module, choose M here: the module will be |
| 1030 |
called me4000. |
| 1031 |
|
| 1032 |
config COMEDI_ME_DAQ |
| 1033 |
tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support" |
| 1034 |
help |
| 1035 |
Enable support for Meilhaus PCI data acquisition cards |
| 1036 |
ME-2000i, ME-2600i and ME-3000vm1 |
| 1037 |
|
| 1038 |
To compile this driver as a module, choose M here: the module will be |
| 1039 |
called me_daq. |
| 1040 |
|
| 1041 |
config COMEDI_NI_6527 |
| 1042 |
tristate "NI 6527 support" |
| 1043 |
help |
| 1044 |
Enable support for the National Instruments 6527 PCI card |
| 1045 |
|
| 1046 |
To compile this driver as a module, choose M here: the module will be |
| 1047 |
called ni_6527. |
| 1048 |
|
| 1049 |
config COMEDI_NI_65XX |
| 1050 |
tristate "NI 65xx static dio PCI card support" |
| 1051 |
help |
| 1052 |
Enable support for National Instruments 65xx static dio boards. |
| 1053 |
Supported devices: National Instruments PCI-6509 (ni_65xx), |
| 1054 |
PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, |
| 1055 |
PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, |
| 1056 |
PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528 |
| 1057 |
|
| 1058 |
To compile this driver as a module, choose M here: the module will be |
| 1059 |
called ni_65xx. |
| 1060 |
|
| 1061 |
config COMEDI_NI_660X |
| 1062 |
tristate "NI 660x counter/timer PCI card support" |
| 1063 |
depends on HAS_DMA |
| 1064 |
select COMEDI_NI_TIOCMD |
| 1065 |
help |
| 1066 |
Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, |
| 1067 |
PXI-6602, PXI-6608, PCI-6624, and PXI-6624. |
| 1068 |
|
| 1069 |
To compile this driver as a module, choose M here: the module will be |
| 1070 |
called ni_660x. |
| 1071 |
|
| 1072 |
config COMEDI_NI_670X |
| 1073 |
tristate "NI 670x PCI card support" |
| 1074 |
help |
| 1075 |
Enable support for National Instruments PCI-6703 and PCI-6704 |
| 1076 |
|
| 1077 |
To compile this driver as a module, choose M here: the module will be |
| 1078 |
called ni_670x. |
| 1079 |
|
| 1080 |
config COMEDI_NI_LABPC_PCI |
| 1081 |
tristate "NI Lab-PC PCI-1200 support" |
| 1082 |
select COMEDI_NI_LABPC |
| 1083 |
help |
| 1084 |
Enable support for National Instruments Lab-PC PCI-1200. |
| 1085 |
|
| 1086 |
To compile this driver as a module, choose M here: the module will be |
| 1087 |
called ni_labpc_pci. |
| 1088 |
|
| 1089 |
config COMEDI_NI_PCIDIO |
| 1090 |
tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" |
| 1091 |
depends on HAS_DMA |
| 1092 |
select COMEDI_MITE |
| 1093 |
help |
| 1094 |
Enable support for National Instruments PCI-DIO-32HS, PXI-6533, |
| 1095 |
PCI-6533 and PCI-6534 |
| 1096 |
|
| 1097 |
To compile this driver as a module, choose M here: the module will be |
| 1098 |
called ni_pcidio. |
| 1099 |
|
| 1100 |
config COMEDI_NI_PCIMIO |
| 1101 |
tristate "NI PCI-MIO-E series and M series support" |
| 1102 |
depends on HAS_DMA |
| 1103 |
select COMEDI_NI_TIOCMD |
| 1104 |
select COMEDI_8255 |
| 1105 |
help |
| 1106 |
Enable support for National Instruments PCI-MIO-E series and M series |
| 1107 |
(all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, |
| 1108 |
PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, |
| 1109 |
PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, |
| 1110 |
PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111, |
| 1111 |
PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225, |
| 1112 |
PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251, |
| 1113 |
PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259, |
| 1114 |
PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281, |
| 1115 |
PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711, |
| 1116 |
PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E, |
| 1117 |
PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143 |
| 1118 |
|
| 1119 |
To compile this driver as a module, choose M here: the module will be |
| 1120 |
called ni_pcimio. |
| 1121 |
|
| 1122 |
config COMEDI_RTD520 |
| 1123 |
tristate "Real Time Devices PCI4520/DM7520 support" |
| 1124 |
select COMEDI_8254 |
| 1125 |
help |
| 1126 |
Enable support for Real Time Devices PCI4520/DM7520 |
| 1127 |
|
| 1128 |
To compile this driver as a module, choose M here: the module will be |
| 1129 |
called rtd520. |
| 1130 |
|
| 1131 |
config COMEDI_S626 |
| 1132 |
tristate "Sensoray 626 support" |
| 1133 |
help |
| 1134 |
Enable support for Sensoray 626 |
| 1135 |
|
| 1136 |
To compile this driver as a module, choose M here: the module will be |
| 1137 |
called s626. |
| 1138 |
|
| 1139 |
config COMEDI_MITE |
| 1140 |
depends on HAS_DMA |
| 1141 |
tristate |
| 1142 |
|
| 1143 |
config COMEDI_NI_TIOCMD |
| 1144 |
tristate |
| 1145 |
depends on HAS_DMA |
| 1146 |
select COMEDI_NI_TIO |
| 1147 |
select COMEDI_MITE |
| 1148 |
|
| 1149 |
endif # COMEDI_PCI_DRIVERS |
| 1150 |
|
| 1151 |
menuconfig COMEDI_PCMCIA_DRIVERS |
| 1152 |
tristate "Comedi PCMCIA drivers" |
| 1153 |
depends on PCMCIA && HAS_IOPORT |
| 1154 |
help |
| 1155 |
Enable support for comedi PCMCIA drivers. |
| 1156 |
|
| 1157 |
To compile this support as a module, choose M here: the module will |
| 1158 |
be called comedi_pcmcia. |
| 1159 |
|
| 1160 |
if COMEDI_PCMCIA_DRIVERS |
| 1161 |
|
| 1162 |
config COMEDI_CB_DAS16_CS |
| 1163 |
tristate "CB DAS16 series PCMCIA support" |
| 1164 |
select COMEDI_8254 |
| 1165 |
help |
| 1166 |
Enable support for the ComputerBoards/MeasurementComputing PCMCIA |
| 1167 |
cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16 |
| 1168 |
|
| 1169 |
To compile this driver as a module, choose M here: the module will be |
| 1170 |
called cb_das16_cs. |
| 1171 |
|
| 1172 |
config COMEDI_DAS08_CS |
| 1173 |
tristate "CB DAS08 PCMCIA support" |
| 1174 |
select COMEDI_DAS08 |
| 1175 |
help |
| 1176 |
Enable support for the ComputerBoards/MeasurementComputing DAS-08 |
| 1177 |
PCMCIA card |
| 1178 |
|
| 1179 |
To compile this driver as a module, choose M here: the module will be |
| 1180 |
called das08_cs. |
| 1181 |
|
| 1182 |
config COMEDI_NI_DAQ_700_CS |
| 1183 |
tristate "NI DAQCard-700 PCMCIA support" |
| 1184 |
help |
| 1185 |
Enable support for the National Instruments PCMCIA DAQCard-700 DIO |
| 1186 |
|
| 1187 |
To compile this driver as a module, choose M here: the module will be |
| 1188 |
called ni_daq_700. |
| 1189 |
|
| 1190 |
config COMEDI_NI_DAQ_DIO24_CS |
| 1191 |
tristate "NI DAQ-Card DIO-24 PCMCIA support" |
| 1192 |
select COMEDI_8255 |
| 1193 |
help |
| 1194 |
Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 |
| 1195 |
|
| 1196 |
To compile this driver as a module, choose M here: the module will be |
| 1197 |
called ni_daq_dio24. |
| 1198 |
|
| 1199 |
config COMEDI_NI_LABPC_CS |
| 1200 |
tristate "NI DAQCard-1200 PCMCIA support" |
| 1201 |
select COMEDI_NI_LABPC |
| 1202 |
help |
| 1203 |
Enable support for the National Instruments PCMCIA DAQCard-1200 |
| 1204 |
|
| 1205 |
To compile this driver as a module, choose M here: the module will be |
| 1206 |
called ni_labpc_cs. |
| 1207 |
|
| 1208 |
config COMEDI_NI_MIO_CS |
| 1209 |
tristate "NI DAQCard E series PCMCIA support" |
| 1210 |
select COMEDI_NI_TIO |
| 1211 |
select COMEDI_8255 |
| 1212 |
help |
| 1213 |
Enable support for the National Instruments PCMCIA DAQCard E series |
| 1214 |
DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E |
| 1215 |
and DAQCard-6036E |
| 1216 |
|
| 1217 |
To compile this driver as a module, choose M here: the module will be |
| 1218 |
called ni_mio_cs. |
| 1219 |
|
| 1220 |
config COMEDI_QUATECH_DAQP_CS |
| 1221 |
tristate "Quatech DAQP PCMCIA data capture card support" |
| 1222 |
help |
| 1223 |
Enable support for the Quatech DAQP PCMCIA data capture cards |
| 1224 |
DAQP-208 and DAQP-308 |
| 1225 |
|
| 1226 |
To compile this driver as a module, choose M here: the module will be |
| 1227 |
called quatech_daqp_cs. |
| 1228 |
|
| 1229 |
endif # COMEDI_PCMCIA_DRIVERS |
| 1230 |
|
| 1231 |
menuconfig COMEDI_USB_DRIVERS |
| 1232 |
tristate "Comedi USB drivers" |
| 1233 |
depends on USB |
| 1234 |
help |
| 1235 |
Enable support for comedi USB drivers. |
| 1236 |
|
| 1237 |
To compile this support as a module, choose M here: the module will |
| 1238 |
be called comedi_usb. |
| 1239 |
|
| 1240 |
if COMEDI_USB_DRIVERS |
| 1241 |
|
| 1242 |
config COMEDI_DT9812 |
| 1243 |
tristate "DataTranslation DT9812 USB module support" |
| 1244 |
help |
| 1245 |
Enable support for the Data Translation DT9812 USB module |
| 1246 |
|
| 1247 |
To compile this driver as a module, choose M here: the module will be |
| 1248 |
called dt9812. |
| 1249 |
|
| 1250 |
config COMEDI_NI_USB6501 |
| 1251 |
tristate "NI USB-6501 support" |
| 1252 |
help |
| 1253 |
Enable support for the National Instruments USB-6501 module. |
| 1254 |
|
| 1255 |
The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that |
| 1256 |
provides 24 digital I/O lines channels and one 32-bit counter. |
| 1257 |
|
| 1258 |
To compile this driver as a module, choose M here: the module will be |
| 1259 |
called ni_usb6501. |
| 1260 |
|
| 1261 |
config COMEDI_USBDUX |
| 1262 |
tristate "ITL USB-DUX-D support" |
| 1263 |
help |
| 1264 |
Enable support for the Incite Technology Ltd USB-DUX-D Board |
| 1265 |
|
| 1266 |
To compile this driver as a module, choose M here: the module will be |
| 1267 |
called usbdux. |
| 1268 |
|
| 1269 |
config COMEDI_USBDUXFAST |
| 1270 |
tristate "ITL USB-DUXfast support" |
| 1271 |
help |
| 1272 |
Enable support for the Incite Technology Ltd USB-DUXfast Board |
| 1273 |
|
| 1274 |
To compile this driver as a module, choose M here: the module will be |
| 1275 |
called usbduxfast. |
| 1276 |
|
| 1277 |
config COMEDI_USBDUXSIGMA |
| 1278 |
tristate "ITL USB-DUXsigma support" |
| 1279 |
help |
| 1280 |
Enable support for the Incite Technology Ltd USB-DUXsigma Board |
| 1281 |
|
| 1282 |
To compile this driver as a module, choose M here: the module will be |
| 1283 |
called usbduxsigma. |
| 1284 |
|
| 1285 |
config COMEDI_VMK80XX |
| 1286 |
tristate "Velleman VM110/VM140 USB Board support" |
| 1287 |
help |
| 1288 |
Build the Velleman USB Board Low-Level Driver supporting the |
| 1289 |
K8055/K8061 aka VM110/VM140 devices |
| 1290 |
|
| 1291 |
To compile this driver as a module, choose M here: the module will be |
| 1292 |
called vmk80xx. |
| 1293 |
|
| 1294 |
endif # COMEDI_USB_DRIVERS |
| 1295 |
|
| 1296 |
config COMEDI_8254 |
| 1297 |
tristate |
| 1298 |
|
| 1299 |
config COMEDI_8255 |
| 1300 |
tristate |
| 1301 |
|
| 1302 |
config COMEDI_8255_SA |
| 1303 |
tristate "Standalone 8255 support" |
| 1304 |
depends on HAS_IOPORT |
| 1305 |
select COMEDI_8255 |
| 1306 |
help |
| 1307 |
Enable support for 8255 digital I/O as a standalone driver. |
| 1308 |
|
| 1309 |
You should enable compilation this driver if you plan to use a board |
| 1310 |
that has an 8255 chip at a known I/O base address and there are no |
| 1311 |
other Comedi drivers for the board. |
| 1312 |
|
| 1313 |
Note that Comedi drivers for most multi-function boards incorporating |
| 1314 |
an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255 |
| 1315 |
boards use the 8255_pci driver as a wrapper around the 'comedi_8255' |
| 1316 |
module. |
| 1317 |
|
| 1318 |
To compile this driver as a module, choose M here: the module will be |
| 1319 |
called 8255. |
| 1320 |
|
| 1321 |
config COMEDI_KCOMEDILIB |
| 1322 |
tristate "Comedi kcomedilib" |
| 1323 |
help |
| 1324 |
Build the kcomedilib. |
| 1325 |
|
| 1326 |
This is a kernel module used to open and manipulate Comedi devices |
| 1327 |
from within kernel code. It is currently only used by the |
| 1328 |
comedi_bond driver, and its functionality has been stripped down to |
| 1329 |
the needs of that driver, so is currently not very useful for |
| 1330 |
anything else. |
| 1331 |
|
| 1332 |
To compile kcomedilib as a module, choose M here: the module will be |
| 1333 |
called kcomedilib. |
| 1334 |
|
| 1335 |
config COMEDI_AMPLC_DIO200 |
| 1336 |
select COMEDI_8254 |
| 1337 |
tristate |
| 1338 |
|
| 1339 |
config COMEDI_AMPLC_PC236 |
| 1340 |
tristate |
| 1341 |
depends on HAS_IOPORT |
| 1342 |
select COMEDI_8255 |
| 1343 |
|
| 1344 |
config COMEDI_DAS08 |
| 1345 |
tristate |
| 1346 |
depends on HAS_IOPORT |
| 1347 |
select COMEDI_8254 |
| 1348 |
select COMEDI_8255 |
| 1349 |
|
| 1350 |
config COMEDI_ISADMA |
| 1351 |
tristate |
| 1352 |
|
| 1353 |
config COMEDI_NI_LABPC |
| 1354 |
tristate |
| 1355 |
select COMEDI_8254 |
| 1356 |
select COMEDI_8255 |
| 1357 |
|
| 1358 |
config COMEDI_NI_LABPC_ISADMA |
| 1359 |
tristate |
| 1360 |
default COMEDI_NI_LABPC |
| 1361 |
depends on COMEDI_NI_LABPC_ISA != n |
| 1362 |
depends on ISA_DMA_API |
| 1363 |
select COMEDI_ISADMA |
| 1364 |
|
| 1365 |
config COMEDI_NI_TIO |
| 1366 |
tristate |
| 1367 |
select COMEDI_NI_ROUTING |
| 1368 |
|
| 1369 |
config COMEDI_NI_ROUTING |
| 1370 |
tristate |
| 1371 |
|
| 1372 |
config COMEDI_TESTS |
| 1373 |
tristate "Comedi unit tests" |
| 1374 |
help |
| 1375 |
Enable comedi unit-test modules to be built. |
| 1376 |
|
| 1377 |
Note that the answer to this question won't directly affect the |
| 1378 |
kernel: saying N will just cause the configurator to skip all |
| 1379 |
the questions about comedi unit-test modules. |
| 1380 |
|
| 1381 |
if COMEDI_TESTS |
| 1382 |
|
| 1383 |
config COMEDI_TESTS_EXAMPLE |
| 1384 |
tristate "Comedi example unit-test module" |
| 1385 |
help |
| 1386 |
Enable support for an example unit-test module. This is just a |
| 1387 |
silly example to be used as a basis for writing other unit-test |
| 1388 |
modules. |
| 1389 |
|
| 1390 |
To compile this as a module, choose M here: the module will be called |
| 1391 |
comedi_example_test. |
| 1392 |
|
| 1393 |
config COMEDI_TESTS_NI_ROUTES |
| 1394 |
tristate "NI routing unit-test module" |
| 1395 |
select COMEDI_NI_ROUTING |
| 1396 |
help |
| 1397 |
Enable support for a unit-test module to test the signal routing |
| 1398 |
code used by comedi drivers for various National Instruments cards. |
| 1399 |
|
| 1400 |
To compile this as a module, choose M here: the module will be called |
| 1401 |
ni_routes_test. |
| 1402 |
|
| 1403 |
endif # COMEDI_TESTS |
| 1404 |
|
| 1405 |
endif # COMEDI |