| 1 |
# SPDX-License-Identifier: GPL-2.0-only |
| 2 |
menuconfig NVMEM |
| 3 |
bool "NVMEM Support" |
| 4 |
imply NVMEM_LAYOUTS |
| 5 |
help |
| 6 |
Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES... |
| 7 |
|
| 8 |
This framework is designed to provide a generic interface to NVMEM |
| 9 |
from both the Linux Kernel and the userspace. |
| 10 |
|
| 11 |
If unsure, say no. |
| 12 |
|
| 13 |
if NVMEM |
| 14 |
|
| 15 |
config NVMEM_SYSFS |
| 16 |
bool "/sys/bus/nvmem/devices/*/nvmem (sysfs interface)" |
| 17 |
depends on SYSFS |
| 18 |
default y |
| 19 |
help |
| 20 |
Say Y here to add a sysfs interface for NVMEM. |
| 21 |
|
| 22 |
This interface is mostly used by userspace applications to |
| 23 |
read/write directly into nvmem. |
| 24 |
|
| 25 |
# Layouts |
| 26 |
|
| 27 |
source "drivers/nvmem/layouts/Kconfig" |
| 28 |
|
| 29 |
# Devices |
| 30 |
|
| 31 |
config NVMEM_AN8855_EFUSE |
| 32 |
tristate "Airoha AN8855 eFuse support" |
| 33 |
depends on COMPILE_TEST |
| 34 |
help |
| 35 |
Say y here to enable support for reading eFuses on Airoha AN8855 |
| 36 |
Switch. These are e.g. used to store factory programmed |
| 37 |
calibration data required for the PHY. |
| 38 |
|
| 39 |
This driver can also be built as a module. If so, the module will |
| 40 |
be called nvmem-an8855-efuse. |
| 41 |
|
| 42 |
config NVMEM_APPLE_EFUSES |
| 43 |
tristate "Apple eFuse support" |
| 44 |
depends on ARCH_APPLE || COMPILE_TEST |
| 45 |
help |
| 46 |
Say y here to enable support for reading eFuses on Apple SoCs |
| 47 |
such as the M1. These are e.g. used to store factory programmed |
| 48 |
calibration data required for the PCIe or the USB-C PHY. |
| 49 |
|
| 50 |
This driver can also be built as a module. If so, the module will |
| 51 |
be called nvmem-apple-efuses. |
| 52 |
|
| 53 |
config NVMEM_APPLE_SPMI |
| 54 |
tristate "Apple SPMI NVMEM" |
| 55 |
depends on ARCH_APPLE || COMPILE_TEST |
| 56 |
depends on SPMI |
| 57 |
select REGMAP_SPMI |
| 58 |
help |
| 59 |
Say y here to build a driver to expose NVMEM cells for a set of power |
| 60 |
and RTC-related settings on a SPMI-attached PMIC present on Apple |
| 61 |
devices, such as Apple Silicon Macs. |
| 62 |
|
| 63 |
This driver can also be built as a module. If so, the module |
| 64 |
will be called apple-nvmem-spmi. |
| 65 |
|
| 66 |
config NVMEM_BCM_OCOTP |
| 67 |
tristate "Broadcom On-Chip OTP Controller support" |
| 68 |
depends on ARCH_BCM_IPROC || COMPILE_TEST |
| 69 |
depends on HAS_IOMEM |
| 70 |
default ARCH_BCM_IPROC |
| 71 |
help |
| 72 |
Say y here to enable read/write access to the Broadcom OTP |
| 73 |
controller. |
| 74 |
|
| 75 |
This driver can also be built as a module. If so, the module |
| 76 |
will be called nvmem-bcm-ocotp. |
| 77 |
|
| 78 |
config NVMEM_BRCM_NVRAM |
| 79 |
tristate "Broadcom's NVRAM support" |
| 80 |
depends on ARCH_BCM_5301X || COMPILE_TEST |
| 81 |
depends on HAS_IOMEM |
| 82 |
select GENERIC_NET_UTILS |
| 83 |
help |
| 84 |
This driver provides support for Broadcom's NVRAM that can be accessed |
| 85 |
using I/O mapping. |
| 86 |
|
| 87 |
config NVMEM_IMX_IIM |
| 88 |
tristate "i.MX IC Identification Module support" |
| 89 |
depends on ARCH_MXC || COMPILE_TEST |
| 90 |
help |
| 91 |
This is a driver for the IC Identification Module (IIM) available on |
| 92 |
i.MX SoCs, providing access to 4 Kbits of programmable |
| 93 |
eFuses. |
| 94 |
|
| 95 |
This driver can also be built as a module. If so, the module |
| 96 |
will be called nvmem-imx-iim. |
| 97 |
|
| 98 |
config NVMEM_IMX_OCOTP |
| 99 |
tristate "i.MX 6/7/8 On-Chip OTP Controller support" |
| 100 |
depends on ARCH_MXC || COMPILE_TEST |
| 101 |
depends on HAS_IOMEM |
| 102 |
help |
| 103 |
This is a driver for the On-Chip OTP Controller (OCOTP) available on |
| 104 |
i.MX6 SoCs, providing access to 4 Kbits of one-time programmable |
| 105 |
eFuses. |
| 106 |
|
| 107 |
This driver can also be built as a module. If so, the module |
| 108 |
will be called nvmem-imx-ocotp. |
| 109 |
|
| 110 |
config NVMEM_IMX_OCOTP_ELE |
| 111 |
tristate "i.MX On-Chip OTP Controller support" |
| 112 |
depends on ARCH_MXC || COMPILE_TEST |
| 113 |
depends on HAS_IOMEM |
| 114 |
depends on OF |
| 115 |
help |
| 116 |
This is a driver for the On-Chip OTP Controller (OCOTP) |
| 117 |
available on i.MX SoCs which has ELE. |
| 118 |
|
| 119 |
config NVMEM_IMX_OCOTP_SCU |
| 120 |
tristate "i.MX8 SCU On-Chip OTP Controller support" |
| 121 |
depends on IMX_SCU |
| 122 |
depends on HAVE_ARM_SMCCC |
| 123 |
help |
| 124 |
This is a driver for the SCU On-Chip OTP Controller (OCOTP) |
| 125 |
available on i.MX8 SoCs. |
| 126 |
|
| 127 |
config NVMEM_JZ4780_EFUSE |
| 128 |
tristate "JZ4780 EFUSE Memory Support" |
| 129 |
depends on MACH_INGENIC || COMPILE_TEST |
| 130 |
depends on HAS_IOMEM |
| 131 |
depends on OF |
| 132 |
select REGMAP_MMIO |
| 133 |
help |
| 134 |
Say Y here to include support for JZ4780 efuse memory found on |
| 135 |
all JZ4780 SoC based devices. |
| 136 |
To compile this driver as a module, choose M here: the module |
| 137 |
will be called nvmem_jz4780_efuse. |
| 138 |
|
| 139 |
config NVMEM_LAN9662_OTPC |
| 140 |
tristate "Microchip LAN9662 OTP controller support" |
| 141 |
depends on SOC_LAN966 || COMPILE_TEST |
| 142 |
depends on HAS_IOMEM |
| 143 |
help |
| 144 |
This driver enables the OTP controller available on Microchip LAN9662 |
| 145 |
SoCs. It controls the access to the OTP memory connected to it. |
| 146 |
|
| 147 |
config NVMEM_LAYERSCAPE_SFP |
| 148 |
tristate "Layerscape SFP (Security Fuse Processor) support" |
| 149 |
depends on ARCH_LAYERSCAPE || COMPILE_TEST |
| 150 |
depends on HAS_IOMEM |
| 151 |
select REGMAP_MMIO |
| 152 |
help |
| 153 |
This driver provides support to read the eFuses on Freescale |
| 154 |
Layerscape SoC's. For example, the vendor provides a per part |
| 155 |
unique ID there. |
| 156 |
|
| 157 |
This driver can also be built as a module. If so, the module |
| 158 |
will be called layerscape-sfp. |
| 159 |
|
| 160 |
config NVMEM_LPC18XX_EEPROM |
| 161 |
tristate "NXP LPC18XX EEPROM Memory Support" |
| 162 |
depends on ARCH_LPC18XX || COMPILE_TEST |
| 163 |
depends on HAS_IOMEM |
| 164 |
help |
| 165 |
Say Y here to include support for NXP LPC18xx EEPROM memory found in |
| 166 |
NXP LPC185x/3x and LPC435x/3x/2x/1x devices. |
| 167 |
To compile this driver as a module, choose M here: the module |
| 168 |
will be called nvmem_lpc18xx_eeprom. |
| 169 |
|
| 170 |
config NVMEM_LPC18XX_OTP |
| 171 |
tristate "NXP LPC18XX OTP Memory Support" |
| 172 |
depends on ARCH_LPC18XX || COMPILE_TEST |
| 173 |
depends on HAS_IOMEM |
| 174 |
help |
| 175 |
Say Y here to include support for NXP LPC18xx OTP memory found on |
| 176 |
all LPC18xx and LPC43xx devices. |
| 177 |
To compile this driver as a module, choose M here: the module |
| 178 |
will be called nvmem_lpc18xx_otp. |
| 179 |
|
| 180 |
config NVMEM_MAX77759 |
| 181 |
tristate "Maxim Integrated MAX77759 NVMEM Support" |
| 182 |
depends on MFD_MAX77759 |
| 183 |
default MFD_MAX77759 |
| 184 |
help |
| 185 |
Say Y here to include support for the user-accessible storage found |
| 186 |
in Maxim Integrated MAX77759 PMICs. This IC provides space for 30 |
| 187 |
bytes of storage. |
| 188 |
|
| 189 |
This driver can also be built as a module. If so, the module |
| 190 |
will be called nvmem-max77759. |
| 191 |
|
| 192 |
config NVMEM_MESON_EFUSE |
| 193 |
tristate "Amlogic Meson GX eFuse Support" |
| 194 |
depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM |
| 195 |
help |
| 196 |
This is a driver to retrieve specific values from the eFuse found on |
| 197 |
the Amlogic Meson GX SoCs. |
| 198 |
|
| 199 |
This driver can also be built as a module. If so, the module |
| 200 |
will be called nvmem_meson_efuse. |
| 201 |
|
| 202 |
config NVMEM_MESON_MX_EFUSE |
| 203 |
tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" |
| 204 |
depends on ARCH_MESON || COMPILE_TEST |
| 205 |
help |
| 206 |
This is a driver to retrieve specific values from the eFuse found on |
| 207 |
the Amlogic Meson6, Meson8 and Meson8b SoCs. |
| 208 |
|
| 209 |
This driver can also be built as a module. If so, the module |
| 210 |
will be called nvmem_meson_mx_efuse. |
| 211 |
|
| 212 |
config NVMEM_MICROCHIP_OTPC |
| 213 |
tristate "Microchip OTPC support" |
| 214 |
depends on ARCH_AT91 || COMPILE_TEST |
| 215 |
help |
| 216 |
This driver enable the OTP controller available on Microchip SAMA7G5 |
| 217 |
SoCs. It controls the access to the OTP memory connected to it. |
| 218 |
|
| 219 |
config NVMEM_MTK_EFUSE |
| 220 |
tristate "Mediatek SoCs EFUSE support" |
| 221 |
depends on ARCH_MEDIATEK || COMPILE_TEST |
| 222 |
depends on HAS_IOMEM |
| 223 |
help |
| 224 |
This is a driver to access hardware related data like sensor |
| 225 |
calibration, HDMI impedance etc. |
| 226 |
|
| 227 |
This driver can also be built as a module. If so, the module |
| 228 |
will be called efuse-mtk. |
| 229 |
|
| 230 |
config NVMEM_MXS_OCOTP |
| 231 |
tristate "Freescale MXS On-Chip OTP Memory Support" |
| 232 |
depends on ARCH_MXS || COMPILE_TEST |
| 233 |
depends on HAS_IOMEM |
| 234 |
help |
| 235 |
If you say Y here, you will get readonly access to the |
| 236 |
One Time Programmable memory pages that are stored |
| 237 |
on the Freescale i.MX23/i.MX28 processor. |
| 238 |
|
| 239 |
This driver can also be built as a module. If so, the module |
| 240 |
will be called nvmem-mxs-ocotp. |
| 241 |
|
| 242 |
config NVMEM_NINTENDO_OTP |
| 243 |
tristate "Nintendo Wii and Wii U OTP Support" |
| 244 |
depends on WII || COMPILE_TEST |
| 245 |
help |
| 246 |
This is a driver exposing the OTP of a Nintendo Wii or Wii U console. |
| 247 |
|
| 248 |
This memory contains common and per-console keys, signatures and |
| 249 |
related data required to access peripherals. |
| 250 |
|
| 251 |
This driver can also be built as a module. If so, the module |
| 252 |
will be called nvmem-nintendo-otp. |
| 253 |
|
| 254 |
config NVMEM_S32G_OCOTP |
| 255 |
tristate "S32G SoC OCOTP support" |
| 256 |
depends on ARCH_S32 |
| 257 |
help |
| 258 |
This is a driver for the 'OCOTP' peripheral available on S32G |
| 259 |
platforms. |
| 260 |
|
| 261 |
If you say Y here, you will get support for the One Time |
| 262 |
Programmable memory pages. |
| 263 |
|
| 264 |
config NVMEM_QCOM_QFPROM |
| 265 |
tristate "QCOM QFPROM Support" |
| 266 |
depends on ARCH_QCOM || COMPILE_TEST |
| 267 |
depends on HAS_IOMEM |
| 268 |
help |
| 269 |
Say y here to enable QFPROM support. The QFPROM provides access |
| 270 |
functions for QFPROM data to rest of the drivers via nvmem interface. |
| 271 |
|
| 272 |
This driver can also be built as a module. If so, the module |
| 273 |
will be called nvmem_qfprom. |
| 274 |
|
| 275 |
config NVMEM_QCOM_SEC_QFPROM |
| 276 |
tristate "QCOM SECURE QFPROM Support" |
| 277 |
depends on ARCH_QCOM || COMPILE_TEST |
| 278 |
depends on HAS_IOMEM |
| 279 |
depends on OF |
| 280 |
select QCOM_SCM |
| 281 |
help |
| 282 |
Say y here to enable secure QFPROM support. The secure QFPROM provides access |
| 283 |
functions for QFPROM data to rest of the drivers via nvmem interface. |
| 284 |
|
| 285 |
This driver can also be built as a module. If so, the module will be called |
| 286 |
nvmem_sec_qfprom. |
| 287 |
|
| 288 |
config NVMEM_QNAP_MCU_EEPROM |
| 289 |
tristate "QNAP MCU EEPROM Support" |
| 290 |
depends on MFD_QNAP_MCU |
| 291 |
help |
| 292 |
Say y here to enable support for accessing the EEPROM attached to |
| 293 |
QNAP MCU devices. This EEPROM contains additional runtime device |
| 294 |
information, like MAC addresses for ethernet devices that do not |
| 295 |
contain their own mac storage. |
| 296 |
|
| 297 |
config NVMEM_RAVE_SP_EEPROM |
| 298 |
tristate "Rave SP EEPROM Support" |
| 299 |
depends on RAVE_SP_CORE |
| 300 |
help |
| 301 |
Say y here to enable Rave SP EEPROM support. |
| 302 |
|
| 303 |
config NVMEM_RCAR_EFUSE |
| 304 |
tristate "Renesas R-Car Gen4 E-FUSE support" |
| 305 |
depends on (ARCH_RENESAS && ARM64) || COMPILE_TEST |
| 306 |
depends on NVMEM |
| 307 |
help |
| 308 |
Enable support for reading the fuses in the E-FUSE or OTP |
| 309 |
non-volatile memory block on Renesas R-Car Gen4 SoCs. |
| 310 |
|
| 311 |
This driver can also be built as a module. If so, the module |
| 312 |
will be called nvmem-rcar-efuse. |
| 313 |
|
| 314 |
config NVMEM_RMEM |
| 315 |
tristate "Reserved Memory Based Driver Support" |
| 316 |
depends on HAS_IOMEM |
| 317 |
select CRC32 |
| 318 |
help |
| 319 |
This driver maps reserved memory into an nvmem device. It might be |
| 320 |
useful to expose information left by firmware in memory. |
| 321 |
|
| 322 |
This driver can also be built as a module. If so, the module |
| 323 |
will be called nvmem-rmem. |
| 324 |
|
| 325 |
config NVMEM_ROCKCHIP_EFUSE |
| 326 |
tristate "Rockchip eFuse Support" |
| 327 |
depends on ARCH_ROCKCHIP || COMPILE_TEST |
| 328 |
depends on HAS_IOMEM |
| 329 |
help |
| 330 |
This is a simple driver to dump specified values of Rockchip SoC |
| 331 |
from eFuse, such as cpu-leakage. |
| 332 |
|
| 333 |
This driver can also be built as a module. If so, the module |
| 334 |
will be called nvmem_rockchip_efuse. |
| 335 |
|
| 336 |
config NVMEM_ROCKCHIP_OTP |
| 337 |
tristate "Rockchip OTP controller support" |
| 338 |
depends on ARCH_ROCKCHIP || COMPILE_TEST |
| 339 |
depends on HAS_IOMEM |
| 340 |
help |
| 341 |
This is a simple driver to dump specified values of Rockchip SoC |
| 342 |
from OTP, such as cpu-leakage. |
| 343 |
|
| 344 |
This driver can also be built as a module. If so, the module |
| 345 |
will be called nvmem_rockchip_otp. |
| 346 |
|
| 347 |
config NVMEM_SC27XX_EFUSE |
| 348 |
tristate "Spreadtrum SC27XX eFuse Support" |
| 349 |
depends on MFD_SC27XX_PMIC || COMPILE_TEST |
| 350 |
depends on HAS_IOMEM |
| 351 |
help |
| 352 |
This is a simple driver to dump specified values of Spreadtrum |
| 353 |
SC27XX PMICs from eFuse. |
| 354 |
|
| 355 |
This driver can also be built as a module. If so, the module |
| 356 |
will be called nvmem-sc27xx-efuse. |
| 357 |
|
| 358 |
config NVMEM_SNVS_LPGPR |
| 359 |
tristate "Support for Low Power General Purpose Register" |
| 360 |
depends on ARCH_MXC || COMPILE_TEST |
| 361 |
help |
| 362 |
This is a driver for Low Power General Purpose Register (LPGPR) available on |
| 363 |
i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. |
| 364 |
|
| 365 |
This driver can also be built as a module. If so, the module |
| 366 |
will be called nvmem-snvs-lpgpr. |
| 367 |
|
| 368 |
config NVMEM_SPMI_SDAM |
| 369 |
tristate "SPMI SDAM Support" |
| 370 |
depends on SPMI |
| 371 |
help |
| 372 |
This driver supports the Shared Direct Access Memory Module on |
| 373 |
Qualcomm Technologies, Inc. PMICs. It provides the clients |
| 374 |
an interface to read/write to the SDAM module's shared memory. |
| 375 |
|
| 376 |
config NVMEM_SPRD_EFUSE |
| 377 |
tristate "Spreadtrum SoC eFuse Support" |
| 378 |
depends on ARCH_SPRD || COMPILE_TEST |
| 379 |
depends on HAS_IOMEM |
| 380 |
help |
| 381 |
This is a simple driver to dump specified values of Spreadtrum |
| 382 |
SoCs from eFuse. |
| 383 |
|
| 384 |
This driver can also be built as a module. If so, the module |
| 385 |
will be called nvmem-sprd-efuse. |
| 386 |
|
| 387 |
config NVMEM_STM32_BSEC_OPTEE_TA |
| 388 |
def_bool NVMEM_STM32_ROMEM && OPTEE |
| 389 |
help |
| 390 |
Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE |
| 391 |
trusted application STM32MP BSEC. |
| 392 |
|
| 393 |
This library is a used by stm32-romem driver or included in the module |
| 394 |
called nvmem-stm32-romem. |
| 395 |
|
| 396 |
config NVMEM_STM32_ROMEM |
| 397 |
tristate "STMicroelectronics STM32 factory-programmed memory support" |
| 398 |
depends on ARCH_STM32 || COMPILE_TEST |
| 399 |
depends on OPTEE || !OPTEE |
| 400 |
help |
| 401 |
Say y here to enable read-only access for STMicroelectronics STM32 |
| 402 |
factory-programmed memory area. |
| 403 |
|
| 404 |
This driver can also be built as a module. If so, the module |
| 405 |
will be called nvmem-stm32-romem. |
| 406 |
|
| 407 |
config NVMEM_SUNPLUS_OCOTP |
| 408 |
tristate "Sunplus SoC OTP support" |
| 409 |
depends on SOC_SP7021 || COMPILE_TEST |
| 410 |
depends on HAS_IOMEM |
| 411 |
help |
| 412 |
This is a driver for the On-chip OTP controller (OCOTP) available |
| 413 |
on Sunplus SoCs. It provides access to 128 bytes of one-time |
| 414 |
programmable eFuse. |
| 415 |
|
| 416 |
This driver can also be built as a module. If so, the module |
| 417 |
will be called nvmem-sunplus-ocotp. |
| 418 |
|
| 419 |
config NVMEM_SUNXI_SID |
| 420 |
tristate "Allwinner SoCs SID support" |
| 421 |
depends on ARCH_SUNXI |
| 422 |
help |
| 423 |
This is a driver for the 'security ID' available on various Allwinner |
| 424 |
devices. |
| 425 |
|
| 426 |
This driver can also be built as a module. If so, the module |
| 427 |
will be called nvmem_sunxi_sid. |
| 428 |
|
| 429 |
config NVMEM_U_BOOT_ENV |
| 430 |
tristate "U-Boot environment variables support" |
| 431 |
depends on OF && MTD |
| 432 |
select NVMEM_LAYOUT_U_BOOT_ENV |
| 433 |
help |
| 434 |
U-Boot stores its setup as environment variables. This driver adds |
| 435 |
support for verifying & exporting such data. It also exposes variables |
| 436 |
as NVMEM cells so they can be referenced by other drivers. |
| 437 |
|
| 438 |
Currently this drivers works only with env variables on top of MTD. |
| 439 |
|
| 440 |
If compiled as module it will be called nvmem_u-boot-env. |
| 441 |
|
| 442 |
config NVMEM_UNIPHIER_EFUSE |
| 443 |
tristate "UniPhier SoCs eFuse support" |
| 444 |
depends on ARCH_UNIPHIER || COMPILE_TEST |
| 445 |
depends on HAS_IOMEM |
| 446 |
help |
| 447 |
This is a simple driver to dump specified values of UniPhier SoC |
| 448 |
from eFuse. |
| 449 |
|
| 450 |
This driver can also be built as a module. If so, the module |
| 451 |
will be called nvmem-uniphier-efuse. |
| 452 |
|
| 453 |
config NVMEM_VF610_OCOTP |
| 454 |
tristate "VF610 SoC OCOTP support" |
| 455 |
depends on SOC_VF610 || COMPILE_TEST |
| 456 |
depends on HAS_IOMEM |
| 457 |
help |
| 458 |
This is a driver for the 'OCOTP' peripheral available on Vybrid |
| 459 |
devices like VF5xx and VF6xx. |
| 460 |
|
| 461 |
This driver can also be build as a module. If so, the module will |
| 462 |
be called nvmem-vf610-ocotp. |
| 463 |
|
| 464 |
config NVMEM_ZYNQMP |
| 465 |
tristate "Xilinx ZYNQMP SoC nvmem firmware support" |
| 466 |
depends on ARCH_ZYNQMP |
| 467 |
help |
| 468 |
This is a driver to access hardware related data like |
| 469 |
soc revision, IDCODE... etc by using the firmware |
| 470 |
interface. |
| 471 |
|
| 472 |
If sure, say yes. If unsure, say no. |
| 473 |
|
| 474 |
config NVMEM_QORIQ_EFUSE |
| 475 |
tristate "NXP QorIQ eFuse support" |
| 476 |
depends on PPC_85xx || COMPILE_TEST |
| 477 |
depends on HAS_IOMEM |
| 478 |
help |
| 479 |
This driver provides read support for the eFuses (SFP) on NXP QorIQ |
| 480 |
series SoC's. This includes secure boot settings, the globally unique |
| 481 |
NXP ID 'FUIDR' and the OEM unique ID 'OUIDR'. |
| 482 |
|
| 483 |
This driver can also be built as a module. If so, the module |
| 484 |
will be called nvmem_qoriq_efuse. |
| 485 |
|
| 486 |
endif |