| 1 |
/* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 |
/* Copyright (c) 2015-2016 Quantenna Communications. All rights reserved. */ |
| 3 |
|
| 4 |
#ifndef _QTN_QLINK_H_ |
| 5 |
#define _QTN_QLINK_H_ |
| 6 |
|
| 7 |
#include <linux/ieee80211.h> |
| 8 |
|
| 9 |
#define QLINK_PROTO_VER_MAJOR_M 0xFFFF |
| 10 |
#define QLINK_PROTO_VER_MAJOR_S 16 |
| 11 |
#define QLINK_PROTO_VER_MINOR_M 0xFFFF |
| 12 |
#define QLINK_VER_MINOR(_ver) ((_ver) & QLINK_PROTO_VER_MINOR_M) |
| 13 |
#define QLINK_VER_MAJOR(_ver) \ |
| 14 |
(((_ver) >> QLINK_PROTO_VER_MAJOR_S) & QLINK_PROTO_VER_MAJOR_M) |
| 15 |
#define QLINK_VER(_maj, _min) (((_maj) << QLINK_PROTO_VER_MAJOR_S) | (_min)) |
| 16 |
|
| 17 |
#define QLINK_PROTO_VER_MAJOR 18 |
| 18 |
#define QLINK_PROTO_VER_MINOR 1 |
| 19 |
#define QLINK_PROTO_VER \ |
| 20 |
QLINK_VER(QLINK_PROTO_VER_MAJOR, QLINK_PROTO_VER_MINOR) |
| 21 |
|
| 22 |
#define QLINK_ALIGN 4 |
| 23 |
|
| 24 |
#define QLINK_MACID_RSVD 0xFF |
| 25 |
#define QLINK_VIFID_RSVD 0xFF |
| 26 |
|
| 27 |
/* Common QLINK protocol messages definitions. |
| 28 |
*/ |
| 29 |
|
| 30 |
/** |
| 31 |
* enum qlink_msg_type - QLINK message types |
| 32 |
* |
| 33 |
* Used to distinguish between message types of QLINK protocol. |
| 34 |
* |
| 35 |
* @QLINK_MSG_TYPE_CMD: Message is carrying data of a command sent from |
| 36 |
* driver to wireless hardware. |
| 37 |
* @QLINK_MSG_TYPE_CMDRSP: Message is carrying data of a response to a command. |
| 38 |
* Sent from wireless HW to driver in reply to previously issued command. |
| 39 |
* @QLINK_MSG_TYPE_EVENT: Data for an event originated in wireless hardware and |
| 40 |
* sent asynchronously to driver. |
| 41 |
*/ |
| 42 |
enum qlink_msg_type { |
| 43 |
QLINK_MSG_TYPE_CMD = 1, |
| 44 |
QLINK_MSG_TYPE_CMDRSP = 2, |
| 45 |
QLINK_MSG_TYPE_EVENT = 3 |
| 46 |
}; |
| 47 |
|
| 48 |
/** |
| 49 |
* struct qlink_msg_header - common QLINK protocol message header |
| 50 |
* |
| 51 |
* Portion of QLINK protocol header common for all message types. |
| 52 |
* |
| 53 |
* @type: Message type, one of &enum qlink_msg_type. |
| 54 |
* @len: Total length of message including all headers. |
| 55 |
*/ |
| 56 |
struct qlink_msg_header { |
| 57 |
__le16 type; |
| 58 |
__le16 len; |
| 59 |
} __packed; |
| 60 |
|
| 61 |
/* Generic definitions of data and information carried in QLINK messages |
| 62 |
*/ |
| 63 |
|
| 64 |
/** |
| 65 |
* enum qlink_hw_capab - device capabilities. |
| 66 |
* |
| 67 |
* @QLINK_HW_CAPAB_REG_UPDATE: device can update it's regulatory region. |
| 68 |
* @QLINK_HW_CAPAB_STA_INACT_TIMEOUT: device implements a logic to kick-out |
| 69 |
* associated STAs due to inactivity. Inactivity timeout period is taken |
| 70 |
* from QLINK_CMD_START_AP parameters. |
| 71 |
* @QLINK_HW_CAPAB_DFS_OFFLOAD: device implements DFS offload functionality |
| 72 |
* @QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR: device supports MAC Address |
| 73 |
* Randomization in probe requests. |
| 74 |
* @QLINK_HW_CAPAB_OBSS_SCAN: device can perform OBSS scanning. |
| 75 |
* @QLINK_HW_CAPAB_HW_BRIDGE: device has hardware switch capabilities. |
| 76 |
*/ |
| 77 |
enum qlink_hw_capab { |
| 78 |
QLINK_HW_CAPAB_REG_UPDATE = 0, |
| 79 |
QLINK_HW_CAPAB_STA_INACT_TIMEOUT, |
| 80 |
QLINK_HW_CAPAB_DFS_OFFLOAD, |
| 81 |
QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR, |
| 82 |
QLINK_HW_CAPAB_PWR_MGMT, |
| 83 |
QLINK_HW_CAPAB_OBSS_SCAN, |
| 84 |
QLINK_HW_CAPAB_SCAN_DWELL, |
| 85 |
QLINK_HW_CAPAB_SAE, |
| 86 |
QLINK_HW_CAPAB_HW_BRIDGE, |
| 87 |
QLINK_HW_CAPAB_NUM |
| 88 |
}; |
| 89 |
|
| 90 |
/** |
| 91 |
* enum qlink_driver_capab - host driver capabilities. |
| 92 |
* |
| 93 |
*/ |
| 94 |
enum qlink_driver_capab { |
| 95 |
QLINK_DRV_CAPAB_NUM = 0 |
| 96 |
}; |
| 97 |
|
| 98 |
enum qlink_iface_type { |
| 99 |
QLINK_IFTYPE_AP = 1, |
| 100 |
QLINK_IFTYPE_STATION = 2, |
| 101 |
QLINK_IFTYPE_ADHOC = 3, |
| 102 |
QLINK_IFTYPE_MONITOR = 4, |
| 103 |
QLINK_IFTYPE_WDS = 5, |
| 104 |
QLINK_IFTYPE_AP_VLAN = 6, |
| 105 |
}; |
| 106 |
|
| 107 |
/** |
| 108 |
* struct qlink_intf_info - information on virtual interface. |
| 109 |
* |
| 110 |
* Data describing a single virtual interface. |
| 111 |
* |
| 112 |
* @if_type: Mode of interface operation, one of &enum qlink_iface_type |
| 113 |
* @vlanid: VLAN ID for AP_VLAN interface type |
| 114 |
* @mac_addr: MAC address of virtual interface. |
| 115 |
*/ |
| 116 |
struct qlink_intf_info { |
| 117 |
__le16 if_type; |
| 118 |
__le16 vlanid; |
| 119 |
u8 mac_addr[ETH_ALEN]; |
| 120 |
u8 use4addr; |
| 121 |
u8 rsvd[1]; |
| 122 |
} __packed; |
| 123 |
|
| 124 |
enum qlink_sta_flags { |
| 125 |
QLINK_STA_FLAG_INVALID = 0, |
| 126 |
QLINK_STA_FLAG_AUTHORIZED = BIT(0), |
| 127 |
QLINK_STA_FLAG_SHORT_PREAMBLE = BIT(1), |
| 128 |
QLINK_STA_FLAG_WME = BIT(2), |
| 129 |
QLINK_STA_FLAG_MFP = BIT(3), |
| 130 |
QLINK_STA_FLAG_AUTHENTICATED = BIT(4), |
| 131 |
QLINK_STA_FLAG_TDLS_PEER = BIT(5), |
| 132 |
QLINK_STA_FLAG_ASSOCIATED = BIT(6), |
| 133 |
}; |
| 134 |
|
| 135 |
enum qlink_channel_width { |
| 136 |
QLINK_CHAN_WIDTH_5 = 0, |
| 137 |
QLINK_CHAN_WIDTH_10, |
| 138 |
QLINK_CHAN_WIDTH_20_NOHT, |
| 139 |
QLINK_CHAN_WIDTH_20, |
| 140 |
QLINK_CHAN_WIDTH_40, |
| 141 |
QLINK_CHAN_WIDTH_80, |
| 142 |
QLINK_CHAN_WIDTH_80P80, |
| 143 |
QLINK_CHAN_WIDTH_160, |
| 144 |
}; |
| 145 |
|
| 146 |
/** |
| 147 |
* struct qlink_channel - qlink control channel definition |
| 148 |
* |
| 149 |
* @hw_value: hardware-specific value for the channel |
| 150 |
* @center_freq: center frequency in MHz |
| 151 |
* @flags: channel flags from &enum qlink_channel_flags |
| 152 |
* @band: band this channel belongs to |
| 153 |
* @max_antenna_gain: maximum antenna gain in dBi |
| 154 |
* @max_power: maximum transmission power (in dBm) |
| 155 |
* @max_reg_power: maximum regulatory transmission power (in dBm) |
| 156 |
* @dfs_state: current state of this channel. |
| 157 |
* Only relevant if radar is required on this channel. |
| 158 |
* @beacon_found: helper to regulatory code to indicate when a beacon |
| 159 |
* has been found on this channel. Use regulatory_hint_found_beacon() |
| 160 |
* to enable this, this is useful only on 5 GHz band. |
| 161 |
*/ |
| 162 |
struct qlink_channel { |
| 163 |
__le16 hw_value; |
| 164 |
__le16 center_freq; |
| 165 |
__le32 flags; |
| 166 |
u8 band; |
| 167 |
u8 max_antenna_gain; |
| 168 |
u8 max_power; |
| 169 |
u8 max_reg_power; |
| 170 |
__le32 dfs_cac_ms; |
| 171 |
u8 dfs_state; |
| 172 |
u8 beacon_found; |
| 173 |
u8 rsvd[2]; |
| 174 |
} __packed; |
| 175 |
|
| 176 |
/** |
| 177 |
* struct qlink_chandef - qlink channel definition |
| 178 |
* |
| 179 |
* @chan: primary channel definition |
| 180 |
* @center_freq1: center frequency of first segment |
| 181 |
* @center_freq2: center frequency of second segment (80+80 only) |
| 182 |
* @width: channel width, one of @enum qlink_channel_width |
| 183 |
*/ |
| 184 |
struct qlink_chandef { |
| 185 |
struct qlink_channel chan; |
| 186 |
__le16 center_freq1; |
| 187 |
__le16 center_freq2; |
| 188 |
u8 width; |
| 189 |
u8 rsvd[3]; |
| 190 |
} __packed; |
| 191 |
|
| 192 |
#define QLINK_MAX_NR_CIPHER_SUITES 5 |
| 193 |
#define QLINK_MAX_NR_AKM_SUITES 2 |
| 194 |
|
| 195 |
struct qlink_auth_encr { |
| 196 |
__le32 wpa_versions; |
| 197 |
__le32 cipher_group; |
| 198 |
__le32 n_ciphers_pairwise; |
| 199 |
__le32 ciphers_pairwise[QLINK_MAX_NR_CIPHER_SUITES]; |
| 200 |
__le32 n_akm_suites; |
| 201 |
__le32 akm_suites[QLINK_MAX_NR_AKM_SUITES]; |
| 202 |
__le16 control_port_ethertype; |
| 203 |
u8 auth_type; |
| 204 |
u8 privacy; |
| 205 |
u8 control_port; |
| 206 |
u8 control_port_no_encrypt; |
| 207 |
u8 rsvd[2]; |
| 208 |
} __packed; |
| 209 |
|
| 210 |
/** |
| 211 |
* struct qlink_sta_info_state - station flags mask/value |
| 212 |
* |
| 213 |
* @mask: STA flags mask, bitmap of &enum qlink_sta_flags |
| 214 |
* @value: STA flags values, bitmap of &enum qlink_sta_flags |
| 215 |
*/ |
| 216 |
struct qlink_sta_info_state { |
| 217 |
__le32 mask; |
| 218 |
__le32 value; |
| 219 |
} __packed; |
| 220 |
|
| 221 |
/** |
| 222 |
* enum qlink_sr_ctrl_flags - control flags for spatial reuse parameter set |
| 223 |
* |
| 224 |
* @QLINK_SR_PSR_DISALLOWED: indicates whether or not PSR-based spatial reuse |
| 225 |
* transmissions are allowed for STAs associated with the AP |
| 226 |
* @QLINK_SR_NON_SRG_OBSS_PD_SR_DISALLOWED: indicates whether or not |
| 227 |
* Non-SRG OBSS PD spatial reuse transmissions are allowed for STAs associated |
| 228 |
* with the AP |
| 229 |
* @NON_SRG_OFFSET_PRESENT: indicates whether or not Non-SRG OBSS PD Max offset |
| 230 |
* field is valid in the element |
| 231 |
* @QLINK_SR_SRG_INFORMATION_PRESENT: indicates whether or not SRG OBSS PD |
| 232 |
* Min/Max offset fields ore valid in the element |
| 233 |
*/ |
| 234 |
enum qlink_sr_ctrl_flags { |
| 235 |
QLINK_SR_PSR_DISALLOWED = BIT(0), |
| 236 |
QLINK_SR_NON_SRG_OBSS_PD_SR_DISALLOWED = BIT(1), |
| 237 |
QLINK_SR_NON_SRG_OFFSET_PRESENT = BIT(2), |
| 238 |
QLINK_SR_SRG_INFORMATION_PRESENT = BIT(3), |
| 239 |
}; |
| 240 |
|
| 241 |
/** |
| 242 |
* struct qlink_sr_params - spatial reuse parameters |
| 243 |
* |
| 244 |
* @sr_control: spatial reuse control field; flags contained in this field are |
| 245 |
* defined in @qlink_sr_ctrl_flags |
| 246 |
* @non_srg_obss_pd_max: added to -82 dBm to generate the value of the |
| 247 |
* Non-SRG OBSS PD Max parameter |
| 248 |
* @srg_obss_pd_min_offset: added to -82 dBm to generate the value of the |
| 249 |
* SRG OBSS PD Min parameter |
| 250 |
* @srg_obss_pd_max_offset: added to -82 dBm to generate the value of the |
| 251 |
* SRG PBSS PD Max parameter |
| 252 |
*/ |
| 253 |
struct qlink_sr_params { |
| 254 |
u8 sr_control; |
| 255 |
u8 non_srg_obss_pd_max; |
| 256 |
u8 srg_obss_pd_min_offset; |
| 257 |
u8 srg_obss_pd_max_offset; |
| 258 |
} __packed; |
| 259 |
|
| 260 |
/* QLINK Command messages related definitions |
| 261 |
*/ |
| 262 |
|
| 263 |
/** |
| 264 |
* enum qlink_cmd_type - list of supported commands |
| 265 |
* |
| 266 |
* Commands are QLINK messages of type @QLINK_MSG_TYPE_CMD, sent by driver to |
| 267 |
* wireless network device for processing. Device is expected to send back a |
| 268 |
* reply message of type &QLINK_MSG_TYPE_CMDRSP, containing at least command |
| 269 |
* execution status (one of &enum qlink_cmd_result). Reply message |
| 270 |
* may also contain data payload specific to the command type. |
| 271 |
* |
| 272 |
* @QLINK_CMD_SEND_FRAME: send specified frame over the air; firmware will |
| 273 |
* encapsulate 802.3 packet into 802.11 frame automatically. |
| 274 |
* @QLINK_CMD_BAND_INFO_GET: for the specified MAC and specified band, get |
| 275 |
* the band's description including number of operational channels and |
| 276 |
* info on each channel, HT/VHT capabilities, supported rates etc. |
| 277 |
* This command is generic to a specified MAC, interface index must be set |
| 278 |
* to QLINK_VIFID_RSVD in command header. |
| 279 |
* @QLINK_CMD_REG_NOTIFY: notify device about regulatory domain change. This |
| 280 |
* command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE |
| 281 |
* capability. |
| 282 |
* @QLINK_CMD_START_CAC: start radar detection procedure on a specified channel. |
| 283 |
* @QLINK_CMD_TXPWR: get or set current channel transmit power for |
| 284 |
* the specified MAC. |
| 285 |
* @QLINK_CMD_NDEV_EVENT: signalizes changes made with a corresponding network |
| 286 |
* device. |
| 287 |
*/ |
| 288 |
enum qlink_cmd_type { |
| 289 |
QLINK_CMD_FW_INIT = 0x0001, |
| 290 |
QLINK_CMD_FW_DEINIT = 0x0002, |
| 291 |
QLINK_CMD_REGISTER_MGMT = 0x0003, |
| 292 |
QLINK_CMD_SEND_FRAME = 0x0004, |
| 293 |
QLINK_CMD_MGMT_SET_APPIE = 0x0005, |
| 294 |
QLINK_CMD_PHY_PARAMS_SET = 0x0012, |
| 295 |
QLINK_CMD_GET_HW_INFO = 0x0013, |
| 296 |
QLINK_CMD_MAC_INFO = 0x0014, |
| 297 |
QLINK_CMD_ADD_INTF = 0x0015, |
| 298 |
QLINK_CMD_DEL_INTF = 0x0016, |
| 299 |
QLINK_CMD_CHANGE_INTF = 0x0017, |
| 300 |
QLINK_CMD_UPDOWN_INTF = 0x0018, |
| 301 |
QLINK_CMD_REG_NOTIFY = 0x0019, |
| 302 |
QLINK_CMD_BAND_INFO_GET = 0x001A, |
| 303 |
QLINK_CMD_CHAN_SWITCH = 0x001B, |
| 304 |
QLINK_CMD_CHAN_GET = 0x001C, |
| 305 |
QLINK_CMD_START_CAC = 0x001D, |
| 306 |
QLINK_CMD_START_AP = 0x0021, |
| 307 |
QLINK_CMD_STOP_AP = 0x0022, |
| 308 |
QLINK_CMD_SET_MAC_ACL = 0x0023, |
| 309 |
QLINK_CMD_GET_STA_INFO = 0x0030, |
| 310 |
QLINK_CMD_ADD_KEY = 0x0040, |
| 311 |
QLINK_CMD_DEL_KEY = 0x0041, |
| 312 |
QLINK_CMD_SET_DEFAULT_KEY = 0x0042, |
| 313 |
QLINK_CMD_SET_DEFAULT_MGMT_KEY = 0x0043, |
| 314 |
QLINK_CMD_CHANGE_STA = 0x0051, |
| 315 |
QLINK_CMD_DEL_STA = 0x0052, |
| 316 |
QLINK_CMD_SCAN = 0x0053, |
| 317 |
QLINK_CMD_CHAN_STATS = 0x0054, |
| 318 |
QLINK_CMD_NDEV_EVENT = 0x0055, |
| 319 |
QLINK_CMD_CONNECT = 0x0060, |
| 320 |
QLINK_CMD_DISCONNECT = 0x0061, |
| 321 |
QLINK_CMD_PM_SET = 0x0062, |
| 322 |
QLINK_CMD_WOWLAN_SET = 0x0063, |
| 323 |
QLINK_CMD_EXTERNAL_AUTH = 0x0066, |
| 324 |
QLINK_CMD_TXPWR = 0x0067, |
| 325 |
QLINK_CMD_UPDATE_OWE = 0x0068, |
| 326 |
}; |
| 327 |
|
| 328 |
/** |
| 329 |
* struct qlink_cmd - QLINK command message header |
| 330 |
* |
| 331 |
* Header used for QLINK messages of QLINK_MSG_TYPE_CMD type. |
| 332 |
* |
| 333 |
* @mhdr: Common QLINK message header. |
| 334 |
* @cmd_id: command id, one of &enum qlink_cmd_type. |
| 335 |
* @seq_num: sequence number of command message, used for matching with |
| 336 |
* response message. |
| 337 |
* @macid: index of physical radio device the command is destined to or |
| 338 |
* QLINK_MACID_RSVD if not applicable. |
| 339 |
* @vifid: index of virtual wireless interface on specified @macid the command |
| 340 |
* is destined to or QLINK_VIFID_RSVD if not applicable. |
| 341 |
*/ |
| 342 |
struct qlink_cmd { |
| 343 |
struct qlink_msg_header mhdr; |
| 344 |
__le16 cmd_id; |
| 345 |
__le16 seq_num; |
| 346 |
u8 macid; |
| 347 |
u8 vifid; |
| 348 |
u8 rsvd[2]; |
| 349 |
} __packed; |
| 350 |
|
| 351 |
/** |
| 352 |
* struct qlink_cmd_init_fw - data for QLINK_CMD_FW_INIT |
| 353 |
* |
| 354 |
* Initialize firmware based on specified host configuration. This is the first |
| 355 |
* command sent to wifi card and it's fixed part should never be changed, any |
| 356 |
* additions must be done by appending TLVs. |
| 357 |
* If wifi card can not operate with a specified parameters it will return |
| 358 |
* error. |
| 359 |
* |
| 360 |
* @qlink_proto_ver: QLINK protocol version used by host driver. |
| 361 |
*/ |
| 362 |
struct qlink_cmd_init_fw { |
| 363 |
struct qlink_cmd chdr; |
| 364 |
__le32 qlink_proto_ver; |
| 365 |
u8 var_info[]; |
| 366 |
} __packed; |
| 367 |
|
| 368 |
/** |
| 369 |
* struct qlink_cmd_manage_intf - interface management command |
| 370 |
* |
| 371 |
* Data for interface management commands QLINK_CMD_ADD_INTF, QLINK_CMD_DEL_INTF |
| 372 |
* and QLINK_CMD_CHANGE_INTF. |
| 373 |
* |
| 374 |
* @intf_info: interface description. |
| 375 |
*/ |
| 376 |
struct qlink_cmd_manage_intf { |
| 377 |
struct qlink_cmd chdr; |
| 378 |
struct qlink_intf_info intf_info; |
| 379 |
} __packed; |
| 380 |
|
| 381 |
enum qlink_mgmt_frame_type { |
| 382 |
QLINK_MGMT_FRAME_ASSOC_REQ = 0x00, |
| 383 |
QLINK_MGMT_FRAME_ASSOC_RESP = 0x01, |
| 384 |
QLINK_MGMT_FRAME_REASSOC_REQ = 0x02, |
| 385 |
QLINK_MGMT_FRAME_REASSOC_RESP = 0x03, |
| 386 |
QLINK_MGMT_FRAME_PROBE_REQ = 0x04, |
| 387 |
QLINK_MGMT_FRAME_PROBE_RESP = 0x05, |
| 388 |
QLINK_MGMT_FRAME_BEACON = 0x06, |
| 389 |
QLINK_MGMT_FRAME_ATIM = 0x07, |
| 390 |
QLINK_MGMT_FRAME_DISASSOC = 0x08, |
| 391 |
QLINK_MGMT_FRAME_AUTH = 0x09, |
| 392 |
QLINK_MGMT_FRAME_DEAUTH = 0x0A, |
| 393 |
QLINK_MGMT_FRAME_ACTION = 0x0B, |
| 394 |
|
| 395 |
QLINK_MGMT_FRAME_TYPE_COUNT |
| 396 |
}; |
| 397 |
|
| 398 |
/** |
| 399 |
* struct qlink_cmd_mgmt_frame_register - data for QLINK_CMD_REGISTER_MGMT |
| 400 |
* |
| 401 |
* @frame_type: MGMT frame type the registration request describes, one of |
| 402 |
* &enum qlink_mgmt_frame_type. |
| 403 |
* @do_register: 0 - unregister, otherwise register for reception of specified |
| 404 |
* MGMT frame type. |
| 405 |
*/ |
| 406 |
struct qlink_cmd_mgmt_frame_register { |
| 407 |
struct qlink_cmd chdr; |
| 408 |
__le16 frame_type; |
| 409 |
u8 do_register; |
| 410 |
u8 rsvd[1]; |
| 411 |
} __packed; |
| 412 |
|
| 413 |
/** |
| 414 |
* @QLINK_FRAME_TX_FLAG_8023: frame has a 802.3 header; if not set, frame |
| 415 |
* is a 802.11 encapsulated. |
| 416 |
*/ |
| 417 |
enum qlink_frame_tx_flags { |
| 418 |
QLINK_FRAME_TX_FLAG_OFFCHAN = BIT(0), |
| 419 |
QLINK_FRAME_TX_FLAG_NO_CCK = BIT(1), |
| 420 |
QLINK_FRAME_TX_FLAG_ACK_NOWAIT = BIT(2), |
| 421 |
QLINK_FRAME_TX_FLAG_8023 = BIT(3), |
| 422 |
}; |
| 423 |
|
| 424 |
/** |
| 425 |
* struct qlink_cmd_frame_tx - data for QLINK_CMD_SEND_FRAME command |
| 426 |
* |
| 427 |
* @cookie: opaque request identifier. |
| 428 |
* @freq: Frequency to use for frame transmission. |
| 429 |
* @flags: Transmission flags, one of &enum qlink_frame_tx_flags. |
| 430 |
* @frame_data: frame to transmit. |
| 431 |
*/ |
| 432 |
struct qlink_cmd_frame_tx { |
| 433 |
struct qlink_cmd chdr; |
| 434 |
__le32 cookie; |
| 435 |
__le16 freq; |
| 436 |
__le16 flags; |
| 437 |
u8 frame_data[]; |
| 438 |
} __packed; |
| 439 |
|
| 440 |
/** |
| 441 |
* struct qlink_cmd_get_sta_info - data for QLINK_CMD_GET_STA_INFO command |
| 442 |
* |
| 443 |
* @sta_addr: MAC address of the STA statistics is requested for. |
| 444 |
*/ |
| 445 |
struct qlink_cmd_get_sta_info { |
| 446 |
struct qlink_cmd chdr; |
| 447 |
u8 sta_addr[ETH_ALEN]; |
| 448 |
u8 rsvd[2]; |
| 449 |
} __packed; |
| 450 |
|
| 451 |
/** |
| 452 |
* struct qlink_cmd_add_key - data for QLINK_CMD_ADD_KEY command. |
| 453 |
* |
| 454 |
* @key_index: index of the key being installed. |
| 455 |
* @pairwise: whether to use pairwise key. |
| 456 |
* @addr: MAC address of a STA key is being installed to. |
| 457 |
* @cipher: cipher suite. |
| 458 |
* @vlanid: VLAN ID for AP_VLAN interface type |
| 459 |
* @key_data: key data itself. |
| 460 |
*/ |
| 461 |
struct qlink_cmd_add_key { |
| 462 |
struct qlink_cmd chdr; |
| 463 |
u8 key_index; |
| 464 |
u8 pairwise; |
| 465 |
u8 addr[ETH_ALEN]; |
| 466 |
__le32 cipher; |
| 467 |
__le16 vlanid; |
| 468 |
u8 rsvd[2]; |
| 469 |
u8 key_data[]; |
| 470 |
} __packed; |
| 471 |
|
| 472 |
/** |
| 473 |
* struct qlink_cmd_del_key_req - data for QLINK_CMD_DEL_KEY command |
| 474 |
* |
| 475 |
* @key_index: index of the key being removed. |
| 476 |
* @pairwise: whether to use pairwise key. |
| 477 |
* @addr: MAC address of a STA for which a key is removed. |
| 478 |
*/ |
| 479 |
struct qlink_cmd_del_key { |
| 480 |
struct qlink_cmd chdr; |
| 481 |
u8 key_index; |
| 482 |
u8 pairwise; |
| 483 |
u8 addr[ETH_ALEN]; |
| 484 |
} __packed; |
| 485 |
|
| 486 |
/** |
| 487 |
* struct qlink_cmd_set_def_key - data for QLINK_CMD_SET_DEFAULT_KEY command |
| 488 |
* |
| 489 |
* @key_index: index of the key to be set as default one. |
| 490 |
* @unicast: key is unicast. |
| 491 |
* @multicast: key is multicast. |
| 492 |
*/ |
| 493 |
struct qlink_cmd_set_def_key { |
| 494 |
struct qlink_cmd chdr; |
| 495 |
u8 key_index; |
| 496 |
u8 unicast; |
| 497 |
u8 multicast; |
| 498 |
u8 rsvd[1]; |
| 499 |
} __packed; |
| 500 |
|
| 501 |
/** |
| 502 |
* struct qlink_cmd_set_def_mgmt_key - data for QLINK_CMD_SET_DEFAULT_MGMT_KEY |
| 503 |
* |
| 504 |
* @key_index: index of the key to be set as default MGMT key. |
| 505 |
*/ |
| 506 |
struct qlink_cmd_set_def_mgmt_key { |
| 507 |
struct qlink_cmd chdr; |
| 508 |
u8 key_index; |
| 509 |
u8 rsvd[3]; |
| 510 |
} __packed; |
| 511 |
|
| 512 |
/** |
| 513 |
* struct qlink_cmd_change_sta - data for QLINK_CMD_CHANGE_STA command |
| 514 |
* |
| 515 |
* @flag_update: STA flags to update |
| 516 |
* @if_type: Mode of interface operation, one of &enum qlink_iface_type |
| 517 |
* @vlanid: VLAN ID to assign to specific STA |
| 518 |
* @sta_addr: address of the STA for which parameters are set. |
| 519 |
*/ |
| 520 |
struct qlink_cmd_change_sta { |
| 521 |
struct qlink_cmd chdr; |
| 522 |
struct qlink_sta_info_state flag_update; |
| 523 |
__le16 if_type; |
| 524 |
__le16 vlanid; |
| 525 |
u8 sta_addr[ETH_ALEN]; |
| 526 |
u8 rsvd[2]; |
| 527 |
} __packed; |
| 528 |
|
| 529 |
/** |
| 530 |
* struct qlink_cmd_del_sta - data for QLINK_CMD_DEL_STA command. |
| 531 |
* |
| 532 |
* See &struct station_del_parameters |
| 533 |
*/ |
| 534 |
struct qlink_cmd_del_sta { |
| 535 |
struct qlink_cmd chdr; |
| 536 |
__le16 reason_code; |
| 537 |
u8 sta_addr[ETH_ALEN]; |
| 538 |
u8 subtype; |
| 539 |
u8 rsvd[3]; |
| 540 |
} __packed; |
| 541 |
|
| 542 |
enum qlink_sta_connect_flags { |
| 543 |
QLINK_STA_CONNECT_DISABLE_HT = BIT(0), |
| 544 |
QLINK_STA_CONNECT_DISABLE_VHT = BIT(1), |
| 545 |
QLINK_STA_CONNECT_USE_RRM = BIT(2), |
| 546 |
}; |
| 547 |
|
| 548 |
/** |
| 549 |
* struct qlink_cmd_connect - data for QLINK_CMD_CONNECT command |
| 550 |
* |
| 551 |
* @bssid: BSSID of the BSS to connect to. |
| 552 |
* @bssid_hint: recommended AP BSSID for initial connection to the BSS or |
| 553 |
* 00:00:00:00:00:00 if not specified. |
| 554 |
* @prev_bssid: previous BSSID, if specified (not 00:00:00:00:00:00) indicates |
| 555 |
* a request to reassociate. |
| 556 |
* @bg_scan_period: period of background scan. |
| 557 |
* @flags: one of &enum qlink_sta_connect_flags. |
| 558 |
* @ht_capa: HT Capabilities overrides. |
| 559 |
* @ht_capa_mask: The bits of ht_capa which are to be used. |
| 560 |
* @vht_capa: VHT Capability overrides |
| 561 |
* @vht_capa_mask: The bits of vht_capa which are to be used. |
| 562 |
* @aen: authentication information. |
| 563 |
* @mfp: whether to use management frame protection. |
| 564 |
* @payload: variable portion of connection request. |
| 565 |
*/ |
| 566 |
struct qlink_cmd_connect { |
| 567 |
struct qlink_cmd chdr; |
| 568 |
u8 bssid[ETH_ALEN]; |
| 569 |
u8 bssid_hint[ETH_ALEN]; |
| 570 |
u8 prev_bssid[ETH_ALEN]; |
| 571 |
__le16 bg_scan_period; |
| 572 |
__le32 flags; |
| 573 |
struct ieee80211_ht_cap ht_capa; |
| 574 |
struct ieee80211_ht_cap ht_capa_mask; |
| 575 |
struct ieee80211_vht_cap vht_capa; |
| 576 |
struct ieee80211_vht_cap vht_capa_mask; |
| 577 |
struct qlink_auth_encr aen; |
| 578 |
u8 mfp; |
| 579 |
u8 pbss; |
| 580 |
u8 rsvd[2]; |
| 581 |
u8 payload[]; |
| 582 |
} __packed; |
| 583 |
|
| 584 |
/** |
| 585 |
* struct qlink_cmd_external_auth - data for QLINK_CMD_EXTERNAL_AUTH command |
| 586 |
* |
| 587 |
* @bssid: BSSID of the BSS to connect to |
| 588 |
* @status: authentication status code |
| 589 |
* @payload: variable portion of connection request. |
| 590 |
*/ |
| 591 |
struct qlink_cmd_external_auth { |
| 592 |
struct qlink_cmd chdr; |
| 593 |
u8 peer[ETH_ALEN]; |
| 594 |
__le16 status; |
| 595 |
u8 payload[]; |
| 596 |
} __packed; |
| 597 |
|
| 598 |
/** |
| 599 |
* struct qlink_cmd_disconnect - data for QLINK_CMD_DISCONNECT command |
| 600 |
* |
| 601 |
* @reason: code of the reason of disconnect, see &enum ieee80211_reasoncode. |
| 602 |
*/ |
| 603 |
struct qlink_cmd_disconnect { |
| 604 |
struct qlink_cmd chdr; |
| 605 |
__le16 reason; |
| 606 |
u8 rsvd[2]; |
| 607 |
} __packed; |
| 608 |
|
| 609 |
/** |
| 610 |
* struct qlink_cmd_updown - data for QLINK_CMD_UPDOWN_INTF command |
| 611 |
* |
| 612 |
* @if_up: bring specified interface DOWN (if_up==0) or UP (otherwise). |
| 613 |
* Interface is specified in common command header @chdr. |
| 614 |
*/ |
| 615 |
struct qlink_cmd_updown { |
| 616 |
struct qlink_cmd chdr; |
| 617 |
u8 if_up; |
| 618 |
u8 rsvd[3]; |
| 619 |
} __packed; |
| 620 |
|
| 621 |
/** |
| 622 |
* enum qlink_band - a list of frequency bands |
| 623 |
* |
| 624 |
* @QLINK_BAND_2GHZ: 2.4GHz band |
| 625 |
* @QLINK_BAND_5GHZ: 5GHz band |
| 626 |
* @QLINK_BAND_60GHZ: 60GHz band |
| 627 |
*/ |
| 628 |
enum qlink_band { |
| 629 |
QLINK_BAND_2GHZ = BIT(0), |
| 630 |
QLINK_BAND_5GHZ = BIT(1), |
| 631 |
QLINK_BAND_60GHZ = BIT(2), |
| 632 |
}; |
| 633 |
|
| 634 |
/** |
| 635 |
* struct qlink_cmd_band_info_get - data for QLINK_CMD_BAND_INFO_GET command |
| 636 |
* |
| 637 |
* @band: a PHY band for which information is queried, one of @enum qlink_band |
| 638 |
*/ |
| 639 |
struct qlink_cmd_band_info_get { |
| 640 |
struct qlink_cmd chdr; |
| 641 |
u8 band; |
| 642 |
u8 rsvd[3]; |
| 643 |
} __packed; |
| 644 |
|
| 645 |
/** |
| 646 |
* struct qlink_cmd_get_chan_stats - data for QLINK_CMD_CHAN_STATS command |
| 647 |
* |
| 648 |
* @channel_freq: channel center frequency |
| 649 |
*/ |
| 650 |
struct qlink_cmd_get_chan_stats { |
| 651 |
struct qlink_cmd chdr; |
| 652 |
__le32 channel_freq; |
| 653 |
} __packed; |
| 654 |
|
| 655 |
/** |
| 656 |
* enum qlink_reg_initiator - Indicates the initiator of a reg domain request |
| 657 |
* |
| 658 |
* See &enum nl80211_reg_initiator for more info. |
| 659 |
*/ |
| 660 |
enum qlink_reg_initiator { |
| 661 |
QLINK_REGDOM_SET_BY_CORE, |
| 662 |
QLINK_REGDOM_SET_BY_USER, |
| 663 |
QLINK_REGDOM_SET_BY_DRIVER, |
| 664 |
QLINK_REGDOM_SET_BY_COUNTRY_IE, |
| 665 |
}; |
| 666 |
|
| 667 |
/** |
| 668 |
* enum qlink_user_reg_hint_type - type of user regulatory hint |
| 669 |
* |
| 670 |
* See &enum nl80211_user_reg_hint_type for more info. |
| 671 |
*/ |
| 672 |
enum qlink_user_reg_hint_type { |
| 673 |
QLINK_USER_REG_HINT_USER = 0, |
| 674 |
QLINK_USER_REG_HINT_CELL_BASE = 1, |
| 675 |
QLINK_USER_REG_HINT_INDOOR = 2, |
| 676 |
}; |
| 677 |
|
| 678 |
/** |
| 679 |
* struct qlink_cmd_reg_notify - data for QLINK_CMD_REG_NOTIFY command |
| 680 |
* |
| 681 |
* @alpha2: the ISO / IEC 3166 alpha2 country code. |
| 682 |
* @initiator: which entity sent the request, one of &enum qlink_reg_initiator. |
| 683 |
* @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one |
| 684 |
* of &enum qlink_user_reg_hint_type. |
| 685 |
* @num_channels: number of &struct qlink_tlv_channel in a variable portion of a |
| 686 |
* payload. |
| 687 |
* @dfs_region: one of &enum qlink_dfs_regions. |
| 688 |
* @slave_radar: whether slave device should enable radar detection. |
| 689 |
* @dfs_offload: enable or disable DFS offload to firmware. |
| 690 |
* @info: variable portion of regulatory notifier callback. |
| 691 |
*/ |
| 692 |
struct qlink_cmd_reg_notify { |
| 693 |
struct qlink_cmd chdr; |
| 694 |
u8 alpha2[2]; |
| 695 |
u8 initiator; |
| 696 |
u8 user_reg_hint_type; |
| 697 |
u8 num_channels; |
| 698 |
u8 dfs_region; |
| 699 |
u8 slave_radar; |
| 700 |
u8 dfs_offload; |
| 701 |
u8 info[]; |
| 702 |
} __packed; |
| 703 |
|
| 704 |
/** |
| 705 |
* enum qlink_chan_sw_flags - channel switch control flags |
| 706 |
* |
| 707 |
* @QLINK_CHAN_SW_RADAR_REQUIRED: whether radar detection is required on a new |
| 708 |
* channel. |
| 709 |
* @QLINK_CHAN_SW_BLOCK_TX: whether transmissions should be blocked while |
| 710 |
* changing a channel. |
| 711 |
*/ |
| 712 |
enum qlink_chan_sw_flags { |
| 713 |
QLINK_CHAN_SW_RADAR_REQUIRED = BIT(0), |
| 714 |
QLINK_CHAN_SW_BLOCK_TX = BIT(1), |
| 715 |
}; |
| 716 |
|
| 717 |
/** |
| 718 |
* struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command |
| 719 |
* |
| 720 |
* @channel: channel to switch to. |
| 721 |
* @flags: flags to control channel switch, bitmap of &enum qlink_chan_sw_flags. |
| 722 |
* @beacon_count: number of beacons until switch |
| 723 |
*/ |
| 724 |
struct qlink_cmd_chan_switch { |
| 725 |
struct qlink_cmd chdr; |
| 726 |
struct qlink_chandef channel; |
| 727 |
__le64 flags; |
| 728 |
__le32 n_counter_offsets_beacon; |
| 729 |
__le32 n_counter_offsets_presp; |
| 730 |
u8 beacon_count; |
| 731 |
u8 rsvd[3]; |
| 732 |
} __packed; |
| 733 |
|
| 734 |
/** |
| 735 |
* enum qlink_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID |
| 736 |
* |
| 737 |
* Refer to &enum nl80211_hidden_ssid |
| 738 |
*/ |
| 739 |
enum qlink_hidden_ssid { |
| 740 |
QLINK_HIDDEN_SSID_NOT_IN_USE, |
| 741 |
QLINK_HIDDEN_SSID_ZERO_LEN, |
| 742 |
QLINK_HIDDEN_SSID_ZERO_CONTENTS |
| 743 |
}; |
| 744 |
|
| 745 |
/** |
| 746 |
* struct qlink_cmd_start_ap - data for QLINK_CMD_START_AP command |
| 747 |
* |
| 748 |
* @beacon_interval: beacon interval |
| 749 |
* @inactivity_timeout: station's inactivity period in seconds |
| 750 |
* @dtim_period: DTIM period |
| 751 |
* @hidden_ssid: whether to hide the SSID, one of &enum qlink_hidden_ssid |
| 752 |
* @smps_mode: SMPS mode |
| 753 |
* @ht_required: stations must support HT |
| 754 |
* @vht_required: stations must support VHT |
| 755 |
* @aen: encryption info |
| 756 |
* @sr_params: spatial reuse parameters |
| 757 |
* @twt_responder: enable Target Wake Time |
| 758 |
* @info: variable configurations |
| 759 |
*/ |
| 760 |
struct qlink_cmd_start_ap { |
| 761 |
struct qlink_cmd chdr; |
| 762 |
__le16 beacon_interval; |
| 763 |
__le16 inactivity_timeout; |
| 764 |
u8 dtim_period; |
| 765 |
u8 hidden_ssid; |
| 766 |
u8 smps_mode; |
| 767 |
u8 p2p_ctwindow; |
| 768 |
u8 p2p_opp_ps; |
| 769 |
u8 pbss; |
| 770 |
u8 ht_required; |
| 771 |
u8 vht_required; |
| 772 |
struct qlink_auth_encr aen; |
| 773 |
struct qlink_sr_params sr_params; |
| 774 |
u8 twt_responder; |
| 775 |
u8 rsvd[3]; |
| 776 |
u8 info[]; |
| 777 |
} __packed; |
| 778 |
|
| 779 |
/** |
| 780 |
* struct qlink_cmd_start_cac - data for QLINK_CMD_START_CAC command |
| 781 |
* |
| 782 |
* @chan: a channel to start a radar detection procedure on. |
| 783 |
* @cac_time_ms: CAC time. |
| 784 |
*/ |
| 785 |
struct qlink_cmd_start_cac { |
| 786 |
struct qlink_cmd chdr; |
| 787 |
struct qlink_chandef chan; |
| 788 |
__le32 cac_time_ms; |
| 789 |
} __packed; |
| 790 |
|
| 791 |
enum qlink_acl_policy { |
| 792 |
QLINK_ACL_POLICY_ACCEPT_UNLESS_LISTED, |
| 793 |
QLINK_ACL_POLICY_DENY_UNLESS_LISTED, |
| 794 |
}; |
| 795 |
|
| 796 |
struct qlink_mac_address { |
| 797 |
u8 addr[ETH_ALEN]; |
| 798 |
} __packed; |
| 799 |
|
| 800 |
/** |
| 801 |
* struct qlink_acl_data - ACL data |
| 802 |
* |
| 803 |
* @policy: filter policy, one of &enum qlink_acl_policy. |
| 804 |
* @num_entries: number of MAC addresses in array. |
| 805 |
* @mac_address: MAC addresses array. |
| 806 |
*/ |
| 807 |
struct qlink_acl_data { |
| 808 |
__le32 policy; |
| 809 |
__le32 num_entries; |
| 810 |
struct qlink_mac_address mac_addrs[]; |
| 811 |
} __packed; |
| 812 |
|
| 813 |
/** |
| 814 |
* enum qlink_pm_mode - Power Management mode |
| 815 |
* |
| 816 |
* @QLINK_PM_OFF: normal mode, no power saving enabled |
| 817 |
* @QLINK_PM_AUTO_STANDBY: enable auto power save mode |
| 818 |
*/ |
| 819 |
enum qlink_pm_mode { |
| 820 |
QLINK_PM_OFF = 0, |
| 821 |
QLINK_PM_AUTO_STANDBY = 1, |
| 822 |
}; |
| 823 |
|
| 824 |
/** |
| 825 |
* struct qlink_cmd_pm_set - data for QLINK_CMD_PM_SET command |
| 826 |
* |
| 827 |
* @pm_standby timer: period of network inactivity in seconds before |
| 828 |
* putting a radio in power save mode |
| 829 |
* @pm_mode: power management mode |
| 830 |
*/ |
| 831 |
struct qlink_cmd_pm_set { |
| 832 |
struct qlink_cmd chdr; |
| 833 |
__le32 pm_standby_timer; |
| 834 |
u8 pm_mode; |
| 835 |
u8 rsvd[3]; |
| 836 |
} __packed; |
| 837 |
|
| 838 |
/** |
| 839 |
* enum qlink_txpwr_op - transmit power operation type |
| 840 |
* @QLINK_TXPWR_SET: set tx power |
| 841 |
* @QLINK_TXPWR_GET: get current tx power setting |
| 842 |
*/ |
| 843 |
enum qlink_txpwr_op { |
| 844 |
QLINK_TXPWR_SET, |
| 845 |
QLINK_TXPWR_GET |
| 846 |
}; |
| 847 |
|
| 848 |
/** |
| 849 |
* struct qlink_cmd_txpwr - get or set current transmit power |
| 850 |
* |
| 851 |
* @txpwr: new transmit power setting, in mBm |
| 852 |
* @txpwr_setting: transmit power setting type, one of |
| 853 |
* &enum nl80211_tx_power_setting |
| 854 |
* @op_type: type of operation, one of &enum qlink_txpwr_op |
| 855 |
*/ |
| 856 |
struct qlink_cmd_txpwr { |
| 857 |
struct qlink_cmd chdr; |
| 858 |
__le32 txpwr; |
| 859 |
u8 txpwr_setting; |
| 860 |
u8 op_type; |
| 861 |
u8 rsvd[2]; |
| 862 |
} __packed; |
| 863 |
|
| 864 |
/** |
| 865 |
* enum qlink_wowlan_trigger |
| 866 |
* |
| 867 |
* @QLINK_WOWLAN_TRIG_DISCONNECT: wakeup on disconnect |
| 868 |
* @QLINK_WOWLAN_TRIG_MAGIC_PKT: wakeup on magic packet |
| 869 |
* @QLINK_WOWLAN_TRIG_PATTERN_PKT: wakeup on user-defined packet |
| 870 |
*/ |
| 871 |
enum qlink_wowlan_trigger { |
| 872 |
QLINK_WOWLAN_TRIG_DISCONNECT = BIT(0), |
| 873 |
QLINK_WOWLAN_TRIG_MAGIC_PKT = BIT(1), |
| 874 |
QLINK_WOWLAN_TRIG_PATTERN_PKT = BIT(2), |
| 875 |
}; |
| 876 |
|
| 877 |
/** |
| 878 |
* struct qlink_cmd_wowlan_set - data for QLINK_CMD_WOWLAN_SET command |
| 879 |
* |
| 880 |
* @triggers: requested bitmask of WoWLAN triggers |
| 881 |
*/ |
| 882 |
struct qlink_cmd_wowlan_set { |
| 883 |
struct qlink_cmd chdr; |
| 884 |
__le32 triggers; |
| 885 |
u8 data[]; |
| 886 |
} __packed; |
| 887 |
|
| 888 |
enum qlink_ndev_event_type { |
| 889 |
QLINK_NDEV_EVENT_CHANGEUPPER, |
| 890 |
}; |
| 891 |
|
| 892 |
/** |
| 893 |
* struct qlink_cmd_ndev_event - data for QLINK_CMD_NDEV_EVENT command |
| 894 |
* |
| 895 |
* @event: type of event, one of &enum qlink_ndev_event_type |
| 896 |
*/ |
| 897 |
struct qlink_cmd_ndev_event { |
| 898 |
struct qlink_cmd chdr; |
| 899 |
__le16 event; |
| 900 |
u8 rsvd[2]; |
| 901 |
} __packed; |
| 902 |
|
| 903 |
enum qlink_ndev_upper_type { |
| 904 |
QLINK_NDEV_UPPER_TYPE_NONE, |
| 905 |
QLINK_NDEV_UPPER_TYPE_BRIDGE, |
| 906 |
}; |
| 907 |
|
| 908 |
/** |
| 909 |
* struct qlink_cmd_ndev_changeupper - data for QLINK_NDEV_EVENT_CHANGEUPPER |
| 910 |
* |
| 911 |
* @br_domain: layer 2 broadcast domain ID that ndev is a member of |
| 912 |
* @upper_type: type of upper device, one of &enum qlink_ndev_upper_type |
| 913 |
*/ |
| 914 |
struct qlink_cmd_ndev_changeupper { |
| 915 |
struct qlink_cmd_ndev_event nehdr; |
| 916 |
__le64 flags; |
| 917 |
__le32 br_domain; |
| 918 |
__le32 netspace_id; |
| 919 |
__le16 vlanid; |
| 920 |
u8 upper_type; |
| 921 |
u8 rsvd[1]; |
| 922 |
} __packed; |
| 923 |
|
| 924 |
/** |
| 925 |
* enum qlink_scan_flags - scan request control flags |
| 926 |
* |
| 927 |
* Scan flags are used to control QLINK_CMD_SCAN behavior. |
| 928 |
* |
| 929 |
* @QLINK_SCAN_FLAG_FLUSH: flush cache before scanning. |
| 930 |
*/ |
| 931 |
enum qlink_scan_flags { |
| 932 |
QLINK_SCAN_FLAG_FLUSH = BIT(0), |
| 933 |
QLINK_SCAN_FLAG_DURATION_MANDATORY = BIT(1), |
| 934 |
}; |
| 935 |
|
| 936 |
/** |
| 937 |
* struct qlink_cmd_scan - data for QLINK_CMD_SCAN command |
| 938 |
* |
| 939 |
* @flags: scan flags, a bitmap of &enum qlink_scan_flags. |
| 940 |
* @n_ssids: number of WLAN_EID_SSID TLVs expected in variable portion of the |
| 941 |
* command. |
| 942 |
* @n_channels: number of QTN_TLV_ID_CHANNEL TLVs expected in variable payload. |
| 943 |
* @active_dwell: time spent on a single channel for an active scan. |
| 944 |
* @passive_dwell: time spent on a single channel for a passive scan. |
| 945 |
* @sample_duration: total duration of sampling a single channel during a scan |
| 946 |
* including off-channel dwell time and operating channel time. |
| 947 |
* @bssid: specific BSSID to scan for or a broadcast BSSID. |
| 948 |
* @scan_width: channel width to use, one of &enum qlink_channel_width. |
| 949 |
*/ |
| 950 |
struct qlink_cmd_scan { |
| 951 |
struct qlink_cmd chdr; |
| 952 |
__le64 flags; |
| 953 |
__le16 n_ssids; |
| 954 |
__le16 n_channels; |
| 955 |
__le16 active_dwell; |
| 956 |
__le16 passive_dwell; |
| 957 |
__le16 sample_duration; |
| 958 |
u8 bssid[ETH_ALEN]; |
| 959 |
u8 scan_width; |
| 960 |
u8 rsvd[3]; |
| 961 |
u8 var_info[]; |
| 962 |
} __packed; |
| 963 |
|
| 964 |
/** |
| 965 |
* struct qlink_cmd_update_owe - data for QLINK_CMD_UPDATE_OWE_INFO command |
| 966 |
* |
| 967 |
* @peer: MAC of the peer device for which OWE processing has been completed |
| 968 |
* @status: OWE external processing status code |
| 969 |
* @ies: IEs for the peer constructed by the user space |
| 970 |
*/ |
| 971 |
struct qlink_cmd_update_owe { |
| 972 |
struct qlink_cmd chdr; |
| 973 |
u8 peer[ETH_ALEN]; |
| 974 |
__le16 status; |
| 975 |
u8 ies[]; |
| 976 |
} __packed; |
| 977 |
|
| 978 |
/* QLINK Command Responses messages related definitions |
| 979 |
*/ |
| 980 |
|
| 981 |
enum qlink_cmd_result { |
| 982 |
QLINK_CMD_RESULT_OK = 0, |
| 983 |
QLINK_CMD_RESULT_INVALID, |
| 984 |
QLINK_CMD_RESULT_ENOTSUPP, |
| 985 |
QLINK_CMD_RESULT_ENOTFOUND, |
| 986 |
QLINK_CMD_RESULT_EALREADY, |
| 987 |
QLINK_CMD_RESULT_EADDRINUSE, |
| 988 |
QLINK_CMD_RESULT_EADDRNOTAVAIL, |
| 989 |
QLINK_CMD_RESULT_EBUSY, |
| 990 |
}; |
| 991 |
|
| 992 |
/** |
| 993 |
* struct qlink_resp - QLINK command response message header |
| 994 |
* |
| 995 |
* Header used for QLINK messages of QLINK_MSG_TYPE_CMDRSP type. |
| 996 |
* |
| 997 |
* @mhdr: see &struct qlink_msg_header. |
| 998 |
* @cmd_id: command ID the response corresponds to, one of &enum qlink_cmd_type. |
| 999 |
* @seq_num: sequence number of command message, used for matching with |
| 1000 |
* response message. |
| 1001 |
* @result: result of the command execution, one of &enum qlink_cmd_result. |
| 1002 |
* @macid: index of physical radio device the response is sent from or |
| 1003 |
* QLINK_MACID_RSVD if not applicable. |
| 1004 |
* @vifid: index of virtual wireless interface on specified @macid the response |
| 1005 |
* is sent from or QLINK_VIFID_RSVD if not applicable. |
| 1006 |
*/ |
| 1007 |
struct qlink_resp { |
| 1008 |
struct qlink_msg_header mhdr; |
| 1009 |
__le16 cmd_id; |
| 1010 |
__le16 seq_num; |
| 1011 |
__le16 result; |
| 1012 |
u8 macid; |
| 1013 |
u8 vifid; |
| 1014 |
} __packed; |
| 1015 |
|
| 1016 |
/** |
| 1017 |
* struct qlink_resp_init_fw - response for QLINK_CMD_FW_INIT |
| 1018 |
* |
| 1019 |
* @qlink_proto_ver: QLINK protocol version used by wifi card firmware. |
| 1020 |
*/ |
| 1021 |
struct qlink_resp_init_fw { |
| 1022 |
struct qlink_resp rhdr; |
| 1023 |
__le32 qlink_proto_ver; |
| 1024 |
} __packed; |
| 1025 |
|
| 1026 |
/** |
| 1027 |
* enum qlink_dfs_regions - regulatory DFS regions |
| 1028 |
* |
| 1029 |
* Corresponds to &enum nl80211_dfs_regions. |
| 1030 |
*/ |
| 1031 |
enum qlink_dfs_regions { |
| 1032 |
QLINK_DFS_UNSET = 0, |
| 1033 |
QLINK_DFS_FCC = 1, |
| 1034 |
QLINK_DFS_ETSI = 2, |
| 1035 |
QLINK_DFS_JP = 3, |
| 1036 |
}; |
| 1037 |
|
| 1038 |
/** |
| 1039 |
* struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command |
| 1040 |
* |
| 1041 |
* Data describing specific physical device providing wireless MAC |
| 1042 |
* functionality. |
| 1043 |
* |
| 1044 |
* @dev_mac: MAC address of physical WMAC device (used for first BSS on |
| 1045 |
* specified WMAC). |
| 1046 |
* @num_tx_chain: Number of transmit chains used by WMAC. |
| 1047 |
* @num_rx_chain: Number of receive chains used by WMAC. |
| 1048 |
* @vht_cap_mod_mask: mask specifying which VHT capabilities can be altered. |
| 1049 |
* @ht_cap_mod_mask: mask specifying which HT capabilities can be altered. |
| 1050 |
* @max_scan_ssids: maximum number of SSIDs the device can scan for in any scan. |
| 1051 |
* @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band. |
| 1052 |
* @max_ap_assoc_sta: Maximum number of associations supported by WMAC. |
| 1053 |
* @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar. |
| 1054 |
* @alpha2: country code ID firmware is configured to. |
| 1055 |
* @n_reg_rules: number of regulatory rules TLVs in variable portion of the |
| 1056 |
* message. |
| 1057 |
* @dfs_region: regulatory DFS region, one of &enum qlink_dfs_regions. |
| 1058 |
* @var_info: variable-length WMAC info data. |
| 1059 |
*/ |
| 1060 |
struct qlink_resp_get_mac_info { |
| 1061 |
struct qlink_resp rhdr; |
| 1062 |
u8 dev_mac[ETH_ALEN]; |
| 1063 |
u8 num_tx_chain; |
| 1064 |
u8 num_rx_chain; |
| 1065 |
struct ieee80211_vht_cap vht_cap_mod_mask; |
| 1066 |
struct ieee80211_ht_cap ht_cap_mod_mask; |
| 1067 |
|
| 1068 |
__le16 max_ap_assoc_sta; |
| 1069 |
__le32 hw_version; |
| 1070 |
__le32 probe_resp_offload; |
| 1071 |
__le32 bss_select_support; |
| 1072 |
__le16 n_addresses; |
| 1073 |
__le16 radar_detect_widths; |
| 1074 |
__le16 max_remain_on_channel_duration; |
| 1075 |
__le16 max_acl_mac_addrs; |
| 1076 |
|
| 1077 |
__le32 frag_threshold; |
| 1078 |
__le32 rts_threshold; |
| 1079 |
u8 retry_short; |
| 1080 |
u8 retry_long; |
| 1081 |
u8 coverage_class; |
| 1082 |
|
| 1083 |
u8 max_scan_ssids; |
| 1084 |
u8 max_sched_scan_reqs; |
| 1085 |
u8 max_sched_scan_ssids; |
| 1086 |
u8 max_match_sets; |
| 1087 |
u8 max_adj_channel_rssi_comp; |
| 1088 |
|
| 1089 |
__le16 max_scan_ie_len; |
| 1090 |
__le16 max_sched_scan_ie_len; |
| 1091 |
__le32 max_sched_scan_plans; |
| 1092 |
__le32 max_sched_scan_plan_interval; |
| 1093 |
__le32 max_sched_scan_plan_iterations; |
| 1094 |
|
| 1095 |
u8 n_cipher_suites; |
| 1096 |
u8 n_akm_suites; |
| 1097 |
u8 max_num_pmkids; |
| 1098 |
u8 num_iftype_ext_capab; |
| 1099 |
u8 extended_capabilities_len; |
| 1100 |
u8 max_data_retry_count; |
| 1101 |
u8 n_iface_combinations; |
| 1102 |
u8 max_num_csa_counters; |
| 1103 |
|
| 1104 |
u8 bands_cap; |
| 1105 |
u8 alpha2[2]; |
| 1106 |
u8 n_reg_rules; |
| 1107 |
u8 dfs_region; |
| 1108 |
u8 rsvd[3]; |
| 1109 |
u8 var_info[]; |
| 1110 |
} __packed; |
| 1111 |
|
| 1112 |
/** |
| 1113 |
* struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command |
| 1114 |
* |
| 1115 |
* Description of wireless hardware capabilities and features. |
| 1116 |
* |
| 1117 |
* @fw_ver: wireless hardware firmware version. |
| 1118 |
* @num_mac: Number of separate physical radio devices provided by hardware. |
| 1119 |
* @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware. |
| 1120 |
* @total_tx_chains: total number of transmit chains used by device. |
| 1121 |
* @total_rx_chains: total number of receive chains. |
| 1122 |
* @info: variable-length HW info. |
| 1123 |
*/ |
| 1124 |
struct qlink_resp_get_hw_info { |
| 1125 |
struct qlink_resp rhdr; |
| 1126 |
__le32 fw_ver; |
| 1127 |
__le32 bld_tmstamp; |
| 1128 |
__le32 plat_id; |
| 1129 |
__le32 hw_ver; |
| 1130 |
u8 num_mac; |
| 1131 |
u8 mac_bitmap; |
| 1132 |
u8 total_tx_chain; |
| 1133 |
u8 total_rx_chain; |
| 1134 |
u8 info[]; |
| 1135 |
} __packed; |
| 1136 |
|
| 1137 |
/** |
| 1138 |
* struct qlink_resp_manage_intf - response for interface management commands |
| 1139 |
* |
| 1140 |
* Response data for QLINK_CMD_ADD_INTF and QLINK_CMD_CHANGE_INTF commands. |
| 1141 |
* |
| 1142 |
* @rhdr: Common Command Response message header. |
| 1143 |
* @intf_info: interface description. |
| 1144 |
*/ |
| 1145 |
struct qlink_resp_manage_intf { |
| 1146 |
struct qlink_resp rhdr; |
| 1147 |
struct qlink_intf_info intf_info; |
| 1148 |
} __packed; |
| 1149 |
|
| 1150 |
enum qlink_sta_info_rate_flags { |
| 1151 |
QLINK_STA_INFO_RATE_FLAG_HT_MCS = BIT(0), |
| 1152 |
QLINK_STA_INFO_RATE_FLAG_VHT_MCS = BIT(1), |
| 1153 |
QLINK_STA_INFO_RATE_FLAG_SHORT_GI = BIT(2), |
| 1154 |
QLINK_STA_INFO_RATE_FLAG_60G = BIT(3), |
| 1155 |
QLINK_STA_INFO_RATE_FLAG_HE_MCS = BIT(4), |
| 1156 |
}; |
| 1157 |
|
| 1158 |
/** |
| 1159 |
* struct qlink_resp_get_sta_info - response for QLINK_CMD_GET_STA_INFO command |
| 1160 |
* |
| 1161 |
* Response data containing statistics for specified STA. |
| 1162 |
* |
| 1163 |
* @sta_addr: MAC address of STA the response carries statistic for. |
| 1164 |
* @info: variable statistics for specified STA. |
| 1165 |
*/ |
| 1166 |
struct qlink_resp_get_sta_info { |
| 1167 |
struct qlink_resp rhdr; |
| 1168 |
u8 sta_addr[ETH_ALEN]; |
| 1169 |
u8 rsvd[2]; |
| 1170 |
u8 info[]; |
| 1171 |
} __packed; |
| 1172 |
|
| 1173 |
/** |
| 1174 |
* struct qlink_resp_band_info_get - response for QLINK_CMD_BAND_INFO_GET cmd |
| 1175 |
* |
| 1176 |
* @band: frequency band that the response describes, one of @enum qlink_band. |
| 1177 |
* @num_chans: total number of channels info TLVs contained in reply. |
| 1178 |
* @num_bitrates: total number of bitrate TLVs contained in reply. |
| 1179 |
* @info: variable-length info portion. |
| 1180 |
*/ |
| 1181 |
struct qlink_resp_band_info_get { |
| 1182 |
struct qlink_resp rhdr; |
| 1183 |
u8 band; |
| 1184 |
u8 num_chans; |
| 1185 |
u8 num_bitrates; |
| 1186 |
u8 rsvd[1]; |
| 1187 |
u8 info[]; |
| 1188 |
} __packed; |
| 1189 |
|
| 1190 |
/** |
| 1191 |
* struct qlink_resp_get_chan_stats - response for QLINK_CMD_CHAN_STATS cmd |
| 1192 |
* |
| 1193 |
* @chan_freq: center frequency for a channel the report is sent for. |
| 1194 |
* @info: variable-length channel info. |
| 1195 |
*/ |
| 1196 |
struct qlink_resp_get_chan_stats { |
| 1197 |
struct qlink_resp rhdr; |
| 1198 |
__le32 chan_freq; |
| 1199 |
u8 info[]; |
| 1200 |
} __packed; |
| 1201 |
|
| 1202 |
/** |
| 1203 |
* struct qlink_resp_channel_get - response for QLINK_CMD_CHAN_GET command |
| 1204 |
* |
| 1205 |
* @chan: definition of current operating channel. |
| 1206 |
*/ |
| 1207 |
struct qlink_resp_channel_get { |
| 1208 |
struct qlink_resp rhdr; |
| 1209 |
struct qlink_chandef chan; |
| 1210 |
} __packed; |
| 1211 |
|
| 1212 |
/** |
| 1213 |
* struct qlink_resp_txpwr - response for QLINK_CMD_TXPWR command |
| 1214 |
* |
| 1215 |
* This response is intended for QLINK_TXPWR_GET operation and does not |
| 1216 |
* contain any meaningful information in case of QLINK_TXPWR_SET operation. |
| 1217 |
* |
| 1218 |
* @txpwr: current transmit power setting, in mBm |
| 1219 |
*/ |
| 1220 |
struct qlink_resp_txpwr { |
| 1221 |
struct qlink_resp rhdr; |
| 1222 |
__le32 txpwr; |
| 1223 |
} __packed; |
| 1224 |
|
| 1225 |
/* QLINK Events messages related definitions |
| 1226 |
*/ |
| 1227 |
|
| 1228 |
enum qlink_event_type { |
| 1229 |
QLINK_EVENT_STA_ASSOCIATED = 0x0021, |
| 1230 |
QLINK_EVENT_STA_DEAUTH = 0x0022, |
| 1231 |
QLINK_EVENT_MGMT_RECEIVED = 0x0023, |
| 1232 |
QLINK_EVENT_SCAN_RESULTS = 0x0024, |
| 1233 |
QLINK_EVENT_SCAN_COMPLETE = 0x0025, |
| 1234 |
QLINK_EVENT_BSS_JOIN = 0x0026, |
| 1235 |
QLINK_EVENT_BSS_LEAVE = 0x0027, |
| 1236 |
QLINK_EVENT_FREQ_CHANGE = 0x0028, |
| 1237 |
QLINK_EVENT_RADAR = 0x0029, |
| 1238 |
QLINK_EVENT_EXTERNAL_AUTH = 0x0030, |
| 1239 |
QLINK_EVENT_MIC_FAILURE = 0x0031, |
| 1240 |
QLINK_EVENT_UPDATE_OWE = 0x0032, |
| 1241 |
}; |
| 1242 |
|
| 1243 |
/** |
| 1244 |
* struct qlink_event - QLINK event message header |
| 1245 |
* |
| 1246 |
* Header used for QLINK messages of QLINK_MSG_TYPE_EVENT type. |
| 1247 |
* |
| 1248 |
* @mhdr: Common QLINK message header. |
| 1249 |
* @event_id: Specifies specific event ID, one of &enum qlink_event_type. |
| 1250 |
* @macid: index of physical radio device the event was generated on or |
| 1251 |
* QLINK_MACID_RSVD if not applicable. |
| 1252 |
* @vifid: index of virtual wireless interface on specified @macid the event |
| 1253 |
* was generated on or QLINK_VIFID_RSVD if not applicable. |
| 1254 |
*/ |
| 1255 |
struct qlink_event { |
| 1256 |
struct qlink_msg_header mhdr; |
| 1257 |
__le16 event_id; |
| 1258 |
u8 macid; |
| 1259 |
u8 vifid; |
| 1260 |
} __packed; |
| 1261 |
|
| 1262 |
/** |
| 1263 |
* struct qlink_event_sta_assoc - data for QLINK_EVENT_STA_ASSOCIATED event |
| 1264 |
* |
| 1265 |
* @sta_addr: Address of a STA for which new association event was generated |
| 1266 |
* @frame_control: control bits from 802.11 ASSOC_REQUEST header. |
| 1267 |
* @payload: IEs from association request. |
| 1268 |
*/ |
| 1269 |
struct qlink_event_sta_assoc { |
| 1270 |
struct qlink_event ehdr; |
| 1271 |
u8 sta_addr[ETH_ALEN]; |
| 1272 |
__le16 frame_control; |
| 1273 |
u8 ies[]; |
| 1274 |
} __packed; |
| 1275 |
|
| 1276 |
/** |
| 1277 |
* struct qlink_event_sta_deauth - data for QLINK_EVENT_STA_DEAUTH event |
| 1278 |
* |
| 1279 |
* @sta_addr: Address of a deauthenticated STA. |
| 1280 |
* @reason: reason for deauthentication. |
| 1281 |
*/ |
| 1282 |
struct qlink_event_sta_deauth { |
| 1283 |
struct qlink_event ehdr; |
| 1284 |
u8 sta_addr[ETH_ALEN]; |
| 1285 |
__le16 reason; |
| 1286 |
} __packed; |
| 1287 |
|
| 1288 |
/** |
| 1289 |
* struct qlink_event_bss_join - data for QLINK_EVENT_BSS_JOIN event |
| 1290 |
* |
| 1291 |
* @chan: new operating channel definition |
| 1292 |
* @bssid: BSSID of a BSS which interface tried to joined. |
| 1293 |
* @status: status of joining attempt, see &enum ieee80211_statuscode. |
| 1294 |
*/ |
| 1295 |
struct qlink_event_bss_join { |
| 1296 |
struct qlink_event ehdr; |
| 1297 |
struct qlink_chandef chan; |
| 1298 |
u8 bssid[ETH_ALEN]; |
| 1299 |
__le16 status; |
| 1300 |
u8 ies[]; |
| 1301 |
} __packed; |
| 1302 |
|
| 1303 |
/** |
| 1304 |
* struct qlink_event_bss_leave - data for QLINK_EVENT_BSS_LEAVE event |
| 1305 |
* |
| 1306 |
* @reason: reason of disconnecting from BSS. |
| 1307 |
*/ |
| 1308 |
struct qlink_event_bss_leave { |
| 1309 |
struct qlink_event ehdr; |
| 1310 |
__le16 reason; |
| 1311 |
u8 rsvd[2]; |
| 1312 |
} __packed; |
| 1313 |
|
| 1314 |
/** |
| 1315 |
* struct qlink_event_freq_change - data for QLINK_EVENT_FREQ_CHANGE event |
| 1316 |
* |
| 1317 |
* @chan: new operating channel definition |
| 1318 |
*/ |
| 1319 |
struct qlink_event_freq_change { |
| 1320 |
struct qlink_event ehdr; |
| 1321 |
struct qlink_chandef chan; |
| 1322 |
} __packed; |
| 1323 |
|
| 1324 |
enum qlink_rxmgmt_flags { |
| 1325 |
QLINK_RXMGMT_FLAG_ANSWERED = 1 << 0, |
| 1326 |
}; |
| 1327 |
|
| 1328 |
/** |
| 1329 |
* struct qlink_event_rxmgmt - data for QLINK_EVENT_MGMT_RECEIVED event |
| 1330 |
* |
| 1331 |
* @freq: Frequency on which the frame was received in MHz. |
| 1332 |
* @flags: bitmap of &enum qlink_rxmgmt_flags. |
| 1333 |
* @sig_dbm: signal strength in dBm. |
| 1334 |
* @frame_data: data of Rx'd frame itself. |
| 1335 |
*/ |
| 1336 |
struct qlink_event_rxmgmt { |
| 1337 |
struct qlink_event ehdr; |
| 1338 |
__le32 freq; |
| 1339 |
__le32 flags; |
| 1340 |
s8 sig_dbm; |
| 1341 |
u8 rsvd[3]; |
| 1342 |
u8 frame_data[]; |
| 1343 |
} __packed; |
| 1344 |
|
| 1345 |
/** |
| 1346 |
* struct qlink_event_scan_result - data for QLINK_EVENT_SCAN_RESULTS event |
| 1347 |
* |
| 1348 |
* @tsf: TSF timestamp indicating when scan results were generated. |
| 1349 |
* @freq: Center frequency of the channel where BSS for which the scan result |
| 1350 |
* event was generated was discovered. |
| 1351 |
* @capab: capabilities field. |
| 1352 |
* @bintval: beacon interval announced by discovered BSS. |
| 1353 |
* @sig_dbm: signal strength in dBm. |
| 1354 |
* @bssid: BSSID announced by discovered BSS. |
| 1355 |
* @ssid_len: length of SSID announced by BSS. |
| 1356 |
* @ssid: SSID announced by discovered BSS. |
| 1357 |
* @payload: IEs that are announced by discovered BSS in its MGMt frames. |
| 1358 |
*/ |
| 1359 |
struct qlink_event_scan_result { |
| 1360 |
struct qlink_event ehdr; |
| 1361 |
__le64 tsf; |
| 1362 |
__le16 freq; |
| 1363 |
__le16 capab; |
| 1364 |
__le16 bintval; |
| 1365 |
s8 sig_dbm; |
| 1366 |
u8 ssid_len; |
| 1367 |
u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| 1368 |
u8 bssid[ETH_ALEN]; |
| 1369 |
u8 rsvd[2]; |
| 1370 |
u8 payload[]; |
| 1371 |
} __packed; |
| 1372 |
|
| 1373 |
/** |
| 1374 |
* enum qlink_scan_complete_flags - indicates result of scan request. |
| 1375 |
* |
| 1376 |
* @QLINK_SCAN_NONE: Scan request was processed. |
| 1377 |
* @QLINK_SCAN_ABORTED: Scan was aborted. |
| 1378 |
*/ |
| 1379 |
enum qlink_scan_complete_flags { |
| 1380 |
QLINK_SCAN_NONE = 0, |
| 1381 |
QLINK_SCAN_ABORTED = BIT(0), |
| 1382 |
}; |
| 1383 |
|
| 1384 |
/** |
| 1385 |
* struct qlink_event_scan_complete - data for QLINK_EVENT_SCAN_COMPLETE event |
| 1386 |
* |
| 1387 |
* @flags: flags indicating the status of pending scan request, |
| 1388 |
* see &enum qlink_scan_complete_flags. |
| 1389 |
*/ |
| 1390 |
struct qlink_event_scan_complete { |
| 1391 |
struct qlink_event ehdr; |
| 1392 |
__le32 flags; |
| 1393 |
} __packed; |
| 1394 |
|
| 1395 |
enum qlink_radar_event { |
| 1396 |
QLINK_RADAR_DETECTED, |
| 1397 |
QLINK_RADAR_CAC_FINISHED, |
| 1398 |
QLINK_RADAR_CAC_ABORTED, |
| 1399 |
QLINK_RADAR_NOP_FINISHED, |
| 1400 |
QLINK_RADAR_PRE_CAC_EXPIRED, |
| 1401 |
QLINK_RADAR_CAC_STARTED, |
| 1402 |
}; |
| 1403 |
|
| 1404 |
/** |
| 1405 |
* struct qlink_event_radar - data for QLINK_EVENT_RADAR event |
| 1406 |
* |
| 1407 |
* @chan: channel on which radar event happened. |
| 1408 |
* @event: radar event type, one of &enum qlink_radar_event. |
| 1409 |
*/ |
| 1410 |
struct qlink_event_radar { |
| 1411 |
struct qlink_event ehdr; |
| 1412 |
struct qlink_chandef chan; |
| 1413 |
u8 event; |
| 1414 |
u8 rsvd[3]; |
| 1415 |
} __packed; |
| 1416 |
|
| 1417 |
/** |
| 1418 |
* struct qlink_event_external_auth - data for QLINK_EVENT_EXTERNAL_AUTH event |
| 1419 |
* |
| 1420 |
* @ssid: SSID announced by BSS |
| 1421 |
* @ssid_len: SSID length |
| 1422 |
* @bssid: BSSID of the BSS to connect to |
| 1423 |
* @akm_suite: AKM suite for external authentication |
| 1424 |
* @action: action type/trigger for external authentication |
| 1425 |
*/ |
| 1426 |
struct qlink_event_external_auth { |
| 1427 |
struct qlink_event ehdr; |
| 1428 |
__le32 akm_suite; |
| 1429 |
u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| 1430 |
u8 bssid[ETH_ALEN]; |
| 1431 |
u8 ssid_len; |
| 1432 |
u8 action; |
| 1433 |
} __packed; |
| 1434 |
|
| 1435 |
/** |
| 1436 |
* struct qlink_event_mic_failure - data for QLINK_EVENT_MIC_FAILURE event |
| 1437 |
* |
| 1438 |
* @src: source MAC address of the frame |
| 1439 |
* @key_index: index of the key being reported |
| 1440 |
* @pairwise: whether the key is pairwise or group |
| 1441 |
*/ |
| 1442 |
struct qlink_event_mic_failure { |
| 1443 |
struct qlink_event ehdr; |
| 1444 |
u8 src[ETH_ALEN]; |
| 1445 |
u8 key_index; |
| 1446 |
u8 pairwise; |
| 1447 |
} __packed; |
| 1448 |
|
| 1449 |
/** |
| 1450 |
* struct qlink_event_update_owe - data for QLINK_EVENT_UPDATE_OWE event |
| 1451 |
* |
| 1452 |
* @peer: MAC addr of the peer device for which OWE processing needs to be done |
| 1453 |
* @ies: IEs from the peer |
| 1454 |
*/ |
| 1455 |
struct qlink_event_update_owe { |
| 1456 |
struct qlink_event ehdr; |
| 1457 |
u8 peer[ETH_ALEN]; |
| 1458 |
u8 rsvd[2]; |
| 1459 |
u8 ies[]; |
| 1460 |
} __packed; |
| 1461 |
|
| 1462 |
/* QLINK TLVs (Type-Length Values) definitions |
| 1463 |
*/ |
| 1464 |
|
| 1465 |
/** |
| 1466 |
* enum qlink_tlv_id - list of TLVs that Qlink messages can carry |
| 1467 |
* |
| 1468 |
* @QTN_TLV_ID_BITMAP: a data representing a bitmap that is used together with |
| 1469 |
* other TLVs: |
| 1470 |
* &enum qlink_sta_info used to indicate which statistic carried in |
| 1471 |
* QTN_TLV_ID_STA_STATS is valid. |
| 1472 |
* &enum qlink_hw_capab listing wireless card capabilities. |
| 1473 |
* &enum qlink_driver_capab listing driver/host system capabilities. |
| 1474 |
* &enum qlink_chan_stat used to indicate which statistic carried in |
| 1475 |
* QTN_TLV_ID_CHANNEL_STATS is valid. |
| 1476 |
* @QTN_TLV_ID_STA_STATS: per-STA statistics as defined by |
| 1477 |
* &struct qlink_sta_stats. Valid values are marked as such in a bitmap |
| 1478 |
* carried by QTN_TLV_ID_BITMAP. |
| 1479 |
* @QTN_TLV_ID_IFTYPE_DATA: supported band data. |
| 1480 |
*/ |
| 1481 |
enum qlink_tlv_id { |
| 1482 |
QTN_TLV_ID_FRAG_THRESH = 0x0201, |
| 1483 |
QTN_TLV_ID_RTS_THRESH = 0x0202, |
| 1484 |
QTN_TLV_ID_SRETRY_LIMIT = 0x0203, |
| 1485 |
QTN_TLV_ID_LRETRY_LIMIT = 0x0204, |
| 1486 |
QTN_TLV_ID_REG_RULE = 0x0207, |
| 1487 |
QTN_TLV_ID_CHANNEL = 0x020F, |
| 1488 |
QTN_TLV_ID_CHANDEF = 0x0210, |
| 1489 |
QTN_TLV_ID_BITMAP = 0x0211, |
| 1490 |
QTN_TLV_ID_STA_STATS = 0x0212, |
| 1491 |
QTN_TLV_ID_COVERAGE_CLASS = 0x0213, |
| 1492 |
QTN_TLV_ID_IFACE_LIMIT = 0x0214, |
| 1493 |
QTN_TLV_ID_CHANNEL_STATS = 0x0216, |
| 1494 |
QTN_TLV_ID_KEY = 0x0302, |
| 1495 |
QTN_TLV_ID_SEQ = 0x0303, |
| 1496 |
QTN_TLV_ID_IE_SET = 0x0305, |
| 1497 |
QTN_TLV_ID_EXT_CAPABILITY_MASK = 0x0306, |
| 1498 |
QTN_TLV_ID_ACL_DATA = 0x0307, |
| 1499 |
QTN_TLV_ID_BUILD_NAME = 0x0401, |
| 1500 |
QTN_TLV_ID_BUILD_REV = 0x0402, |
| 1501 |
QTN_TLV_ID_BUILD_TYPE = 0x0403, |
| 1502 |
QTN_TLV_ID_BUILD_LABEL = 0x0404, |
| 1503 |
QTN_TLV_ID_HW_ID = 0x0405, |
| 1504 |
QTN_TLV_ID_CALIBRATION_VER = 0x0406, |
| 1505 |
QTN_TLV_ID_UBOOT_VER = 0x0407, |
| 1506 |
QTN_TLV_ID_RANDOM_MAC_ADDR = 0x0408, |
| 1507 |
QTN_TLV_ID_WOWLAN_CAPAB = 0x0410, |
| 1508 |
QTN_TLV_ID_WOWLAN_PATTERN = 0x0411, |
| 1509 |
QTN_TLV_ID_IFTYPE_DATA = 0x0418, |
| 1510 |
}; |
| 1511 |
|
| 1512 |
struct qlink_tlv_hdr { |
| 1513 |
/* New members MUST be added within the struct_group() macro below. */ |
| 1514 |
__struct_group(qlink_tlv_hdr_fixed, __hdr, __packed, |
| 1515 |
__le16 type; |
| 1516 |
__le16 len; |
| 1517 |
); |
| 1518 |
u8 val[]; |
| 1519 |
} __packed; |
| 1520 |
static_assert(offsetof(struct qlink_tlv_hdr, val) == sizeof(struct qlink_tlv_hdr_fixed), |
| 1521 |
"struct member likely outside of __struct_group()"); |
| 1522 |
|
| 1523 |
struct qlink_iface_limit { |
| 1524 |
__le16 max_num; |
| 1525 |
__le16 type; |
| 1526 |
} __packed; |
| 1527 |
|
| 1528 |
struct qlink_iface_limit_record { |
| 1529 |
__le16 max_interfaces; |
| 1530 |
u8 num_different_channels; |
| 1531 |
u8 n_limits; |
| 1532 |
struct qlink_iface_limit limits[]; |
| 1533 |
} __packed; |
| 1534 |
|
| 1535 |
#define QLINK_RSSI_OFFSET 120 |
| 1536 |
|
| 1537 |
/** |
| 1538 |
* enum qlink_reg_rule_flags - regulatory rule flags |
| 1539 |
* |
| 1540 |
* See description of &enum nl80211_reg_rule_flags |
| 1541 |
*/ |
| 1542 |
enum qlink_reg_rule_flags { |
| 1543 |
QLINK_RRF_NO_OFDM = BIT(0), |
| 1544 |
QLINK_RRF_NO_CCK = BIT(1), |
| 1545 |
QLINK_RRF_NO_INDOOR = BIT(2), |
| 1546 |
QLINK_RRF_NO_OUTDOOR = BIT(3), |
| 1547 |
QLINK_RRF_DFS = BIT(4), |
| 1548 |
QLINK_RRF_PTP_ONLY = BIT(5), |
| 1549 |
QLINK_RRF_PTMP_ONLY = BIT(6), |
| 1550 |
QLINK_RRF_NO_IR = BIT(7), |
| 1551 |
QLINK_RRF_AUTO_BW = BIT(8), |
| 1552 |
QLINK_RRF_IR_CONCURRENT = BIT(9), |
| 1553 |
QLINK_RRF_NO_HT40MINUS = BIT(10), |
| 1554 |
QLINK_RRF_NO_HT40PLUS = BIT(11), |
| 1555 |
QLINK_RRF_NO_80MHZ = BIT(12), |
| 1556 |
QLINK_RRF_NO_160MHZ = BIT(13), |
| 1557 |
}; |
| 1558 |
|
| 1559 |
/** |
| 1560 |
* struct qlink_tlv_reg_rule - data for QTN_TLV_ID_REG_RULE TLV |
| 1561 |
* |
| 1562 |
* Regulatory rule description. |
| 1563 |
* |
| 1564 |
* @start_freq_khz: start frequency of the range the rule is attributed to. |
| 1565 |
* @end_freq_khz: end frequency of the range the rule is attributed to. |
| 1566 |
* @max_bandwidth_khz: max bandwidth that channels in specified range can be |
| 1567 |
* configured to. |
| 1568 |
* @max_antenna_gain: max antenna gain that can be used in the specified |
| 1569 |
* frequency range, dBi. |
| 1570 |
* @max_eirp: maximum EIRP. |
| 1571 |
* @flags: regulatory rule flags in &enum qlink_reg_rule_flags. |
| 1572 |
* @dfs_cac_ms: DFS CAC period. |
| 1573 |
*/ |
| 1574 |
struct qlink_tlv_reg_rule { |
| 1575 |
struct qlink_tlv_hdr_fixed hdr; |
| 1576 |
__le32 start_freq_khz; |
| 1577 |
__le32 end_freq_khz; |
| 1578 |
__le32 max_bandwidth_khz; |
| 1579 |
__le32 max_antenna_gain; |
| 1580 |
__le32 max_eirp; |
| 1581 |
__le32 flags; |
| 1582 |
__le32 dfs_cac_ms; |
| 1583 |
} __packed; |
| 1584 |
|
| 1585 |
enum qlink_channel_flags { |
| 1586 |
QLINK_CHAN_DISABLED = BIT(0), |
| 1587 |
QLINK_CHAN_NO_IR = BIT(1), |
| 1588 |
QLINK_CHAN_RADAR = BIT(3), |
| 1589 |
QLINK_CHAN_NO_HT40PLUS = BIT(4), |
| 1590 |
QLINK_CHAN_NO_HT40MINUS = BIT(5), |
| 1591 |
QLINK_CHAN_NO_OFDM = BIT(6), |
| 1592 |
QLINK_CHAN_NO_80MHZ = BIT(7), |
| 1593 |
QLINK_CHAN_NO_160MHZ = BIT(8), |
| 1594 |
QLINK_CHAN_INDOOR_ONLY = BIT(9), |
| 1595 |
QLINK_CHAN_IR_CONCURRENT = BIT(10), |
| 1596 |
QLINK_CHAN_NO_20MHZ = BIT(11), |
| 1597 |
QLINK_CHAN_NO_10MHZ = BIT(12), |
| 1598 |
}; |
| 1599 |
|
| 1600 |
enum qlink_dfs_state { |
| 1601 |
QLINK_DFS_USABLE, |
| 1602 |
QLINK_DFS_UNAVAILABLE, |
| 1603 |
QLINK_DFS_AVAILABLE, |
| 1604 |
}; |
| 1605 |
|
| 1606 |
/** |
| 1607 |
* struct qlink_tlv_channel - data for QTN_TLV_ID_CHANNEL TLV |
| 1608 |
* |
| 1609 |
* Channel settings. |
| 1610 |
* |
| 1611 |
* @channel: ieee80211 channel settings. |
| 1612 |
*/ |
| 1613 |
struct qlink_tlv_channel { |
| 1614 |
struct qlink_tlv_hdr_fixed hdr; |
| 1615 |
struct qlink_channel chan; |
| 1616 |
} __packed; |
| 1617 |
|
| 1618 |
/** |
| 1619 |
* struct qlink_tlv_chandef - data for QTN_TLV_ID_CHANDEF TLV |
| 1620 |
* |
| 1621 |
* Channel definition. |
| 1622 |
* |
| 1623 |
* @chan: channel definition data. |
| 1624 |
*/ |
| 1625 |
struct qlink_tlv_chandef { |
| 1626 |
struct qlink_tlv_hdr_fixed hdr; |
| 1627 |
struct qlink_chandef chdef; |
| 1628 |
} __packed; |
| 1629 |
|
| 1630 |
enum qlink_ie_set_type { |
| 1631 |
QLINK_IE_SET_UNKNOWN, |
| 1632 |
QLINK_IE_SET_ASSOC_REQ, |
| 1633 |
QLINK_IE_SET_ASSOC_RESP, |
| 1634 |
QLINK_IE_SET_PROBE_REQ, |
| 1635 |
QLINK_IE_SET_SCAN, |
| 1636 |
QLINK_IE_SET_BEACON_HEAD, |
| 1637 |
QLINK_IE_SET_BEACON_TAIL, |
| 1638 |
QLINK_IE_SET_BEACON_IES, |
| 1639 |
QLINK_IE_SET_PROBE_RESP, |
| 1640 |
QLINK_IE_SET_PROBE_RESP_IES, |
| 1641 |
}; |
| 1642 |
|
| 1643 |
/** |
| 1644 |
* struct qlink_tlv_ie_set - data for QTN_TLV_ID_IE_SET |
| 1645 |
* |
| 1646 |
* @type: type of MGMT frame IEs belong to, one of &enum qlink_ie_set_type. |
| 1647 |
* @flags: for future use. |
| 1648 |
* @ie_data: IEs data. |
| 1649 |
*/ |
| 1650 |
struct qlink_tlv_ie_set { |
| 1651 |
struct qlink_tlv_hdr_fixed hdr; |
| 1652 |
u8 type; |
| 1653 |
u8 flags; |
| 1654 |
u8 rsvd[2]; |
| 1655 |
u8 ie_data[]; |
| 1656 |
} __packed; |
| 1657 |
|
| 1658 |
/** |
| 1659 |
* struct qlink_tlv_ext_ie - extension IE |
| 1660 |
* |
| 1661 |
* @eid_ext: element ID extension, one of &enum ieee80211_eid_ext. |
| 1662 |
* @ie_data: IEs data. |
| 1663 |
*/ |
| 1664 |
struct qlink_tlv_ext_ie { |
| 1665 |
struct qlink_tlv_hdr_fixed hdr; |
| 1666 |
u8 eid_ext; |
| 1667 |
u8 rsvd[3]; |
| 1668 |
u8 ie_data[]; |
| 1669 |
} __packed; |
| 1670 |
|
| 1671 |
#define IEEE80211_HE_PPE_THRES_MAX_LEN 25 |
| 1672 |
struct qlink_sband_iftype_data { |
| 1673 |
__le16 types_mask; |
| 1674 |
struct ieee80211_he_cap_elem he_cap_elem; |
| 1675 |
struct ieee80211_he_mcs_nss_supp he_mcs_nss_supp; |
| 1676 |
u8 ppe_thres[IEEE80211_HE_PPE_THRES_MAX_LEN]; |
| 1677 |
} __packed; |
| 1678 |
|
| 1679 |
/** |
| 1680 |
* struct qlink_tlv_iftype_data - data for QTN_TLV_ID_IFTYPE_DATA |
| 1681 |
* |
| 1682 |
* @n_iftype_data: number of entries in iftype_data. |
| 1683 |
* @iftype_data: interface type data entries. |
| 1684 |
*/ |
| 1685 |
struct qlink_tlv_iftype_data { |
| 1686 |
struct qlink_tlv_hdr_fixed hdr; |
| 1687 |
u8 n_iftype_data; |
| 1688 |
u8 rsvd[3]; |
| 1689 |
struct qlink_sband_iftype_data iftype_data[]; |
| 1690 |
} __packed; |
| 1691 |
|
| 1692 |
/** |
| 1693 |
* enum qlink_chan_stat - channel statistics bitmap |
| 1694 |
* |
| 1695 |
* Used to indicate which statistics values in &struct qlink_chan_stats |
| 1696 |
* are valid. Individual values are used to fill a bitmap carried in a |
| 1697 |
* payload of QTN_TLV_ID_BITMAP. |
| 1698 |
* |
| 1699 |
* @QLINK_CHAN_STAT_TIME_ON: time_on value is valid. |
| 1700 |
* @QLINK_CHAN_STAT_TIME_TX: time_tx value is valid. |
| 1701 |
* @QLINK_CHAN_STAT_TIME_RX: time_rx value is valid. |
| 1702 |
* @QLINK_CHAN_STAT_CCA_BUSY: cca_busy value is valid. |
| 1703 |
* @QLINK_CHAN_STAT_CCA_BUSY_EXT: cca_busy_ext value is valid. |
| 1704 |
* @QLINK_CHAN_STAT_TIME_SCAN: time_scan value is valid. |
| 1705 |
* @QLINK_CHAN_STAT_CHAN_NOISE: chan_noise value is valid. |
| 1706 |
*/ |
| 1707 |
enum qlink_chan_stat { |
| 1708 |
QLINK_CHAN_STAT_TIME_ON, |
| 1709 |
QLINK_CHAN_STAT_TIME_TX, |
| 1710 |
QLINK_CHAN_STAT_TIME_RX, |
| 1711 |
QLINK_CHAN_STAT_CCA_BUSY, |
| 1712 |
QLINK_CHAN_STAT_CCA_BUSY_EXT, |
| 1713 |
QLINK_CHAN_STAT_TIME_SCAN, |
| 1714 |
QLINK_CHAN_STAT_CHAN_NOISE, |
| 1715 |
QLINK_CHAN_STAT_NUM, |
| 1716 |
}; |
| 1717 |
|
| 1718 |
/** |
| 1719 |
* struct qlink_chan_stats - data for QTN_TLV_ID_CHANNEL_STATS |
| 1720 |
* |
| 1721 |
* Carries a per-channel statistics. Not all fields may be filled with |
| 1722 |
* valid values. Valid fields should be indicated as such using a bitmap of |
| 1723 |
* &enum qlink_chan_stat. Bitmap is carried separately in a payload of |
| 1724 |
* QTN_TLV_ID_BITMAP. |
| 1725 |
* |
| 1726 |
* @time_on: amount of time radio operated on that channel. |
| 1727 |
* @time_tx: amount of time radio spent transmitting on the channel. |
| 1728 |
* @time_rx: amount of time radio spent receiving on the channel. |
| 1729 |
* @cca_busy: amount of time the primary channel was busy. |
| 1730 |
* @cca_busy_ext: amount of time the secondary channel was busy. |
| 1731 |
* @time_scan: amount of radio spent scanning on the channel. |
| 1732 |
* @chan_noise: channel noise. |
| 1733 |
*/ |
| 1734 |
struct qlink_chan_stats { |
| 1735 |
__le64 time_on; |
| 1736 |
__le64 time_tx; |
| 1737 |
__le64 time_rx; |
| 1738 |
__le64 cca_busy; |
| 1739 |
__le64 cca_busy_ext; |
| 1740 |
__le64 time_scan; |
| 1741 |
s8 chan_noise; |
| 1742 |
u8 rsvd[3]; |
| 1743 |
} __packed; |
| 1744 |
|
| 1745 |
/** |
| 1746 |
* enum qlink_sta_info - station information bitmap |
| 1747 |
* |
| 1748 |
* Used to indicate which statistics values in &struct qlink_sta_stats |
| 1749 |
* are valid. Individual values are used to fill a bitmap carried in a |
| 1750 |
* payload of QTN_TLV_ID_BITMAP. |
| 1751 |
* |
| 1752 |
* @QLINK_STA_INFO_CONNECTED_TIME: connected_time value is valid. |
| 1753 |
* @QLINK_STA_INFO_INACTIVE_TIME: inactive_time value is valid. |
| 1754 |
* @QLINK_STA_INFO_RX_BYTES: lower 32 bits of rx_bytes value are valid. |
| 1755 |
* @QLINK_STA_INFO_TX_BYTES: lower 32 bits of tx_bytes value are valid. |
| 1756 |
* @QLINK_STA_INFO_RX_BYTES64: rx_bytes value is valid. |
| 1757 |
* @QLINK_STA_INFO_TX_BYTES64: tx_bytes value is valid. |
| 1758 |
* @QLINK_STA_INFO_RX_DROP_MISC: rx_dropped_misc value is valid. |
| 1759 |
* @QLINK_STA_INFO_BEACON_RX: rx_beacon value is valid. |
| 1760 |
* @QLINK_STA_INFO_SIGNAL: signal value is valid. |
| 1761 |
* @QLINK_STA_INFO_SIGNAL_AVG: signal_avg value is valid. |
| 1762 |
* @QLINK_STA_INFO_RX_BITRATE: rxrate value is valid. |
| 1763 |
* @QLINK_STA_INFO_TX_BITRATE: txrate value is valid. |
| 1764 |
* @QLINK_STA_INFO_RX_PACKETS: rx_packets value is valid. |
| 1765 |
* @QLINK_STA_INFO_TX_PACKETS: tx_packets value is valid. |
| 1766 |
* @QLINK_STA_INFO_TX_RETRIES: tx_retries value is valid. |
| 1767 |
* @QLINK_STA_INFO_TX_FAILED: tx_failed value is valid. |
| 1768 |
* @QLINK_STA_INFO_STA_FLAGS: sta_flags value is valid. |
| 1769 |
*/ |
| 1770 |
enum qlink_sta_info { |
| 1771 |
QLINK_STA_INFO_CONNECTED_TIME, |
| 1772 |
QLINK_STA_INFO_INACTIVE_TIME, |
| 1773 |
QLINK_STA_INFO_RX_BYTES, |
| 1774 |
QLINK_STA_INFO_TX_BYTES, |
| 1775 |
QLINK_STA_INFO_RX_BYTES64, |
| 1776 |
QLINK_STA_INFO_TX_BYTES64, |
| 1777 |
QLINK_STA_INFO_RX_DROP_MISC, |
| 1778 |
QLINK_STA_INFO_BEACON_RX, |
| 1779 |
QLINK_STA_INFO_SIGNAL, |
| 1780 |
QLINK_STA_INFO_SIGNAL_AVG, |
| 1781 |
QLINK_STA_INFO_RX_BITRATE, |
| 1782 |
QLINK_STA_INFO_TX_BITRATE, |
| 1783 |
QLINK_STA_INFO_RX_PACKETS, |
| 1784 |
QLINK_STA_INFO_TX_PACKETS, |
| 1785 |
QLINK_STA_INFO_TX_RETRIES, |
| 1786 |
QLINK_STA_INFO_TX_FAILED, |
| 1787 |
QLINK_STA_INFO_STA_FLAGS, |
| 1788 |
QLINK_STA_INFO_NUM, |
| 1789 |
}; |
| 1790 |
|
| 1791 |
/** |
| 1792 |
* struct qlink_sta_info_rate - STA rate statistics |
| 1793 |
* |
| 1794 |
* @rate: data rate in Mbps. |
| 1795 |
* @flags: bitmap of &enum qlink_sta_info_rate_flags. |
| 1796 |
* @mcs: 802.11-defined MCS index. |
| 1797 |
* nss: Number of Spatial Streams. |
| 1798 |
* @bw: bandwidth, one of &enum qlink_channel_width. |
| 1799 |
*/ |
| 1800 |
struct qlink_sta_info_rate { |
| 1801 |
__le16 rate; |
| 1802 |
u8 flags; |
| 1803 |
u8 mcs; |
| 1804 |
u8 nss; |
| 1805 |
u8 bw; |
| 1806 |
} __packed; |
| 1807 |
|
| 1808 |
/** |
| 1809 |
* struct qlink_sta_stats - data for QTN_TLV_ID_STA_STATS |
| 1810 |
* |
| 1811 |
* Carries statistics of a STA. Not all fields may be filled with |
| 1812 |
* valid values. Valid fields should be indicated as such using a bitmap of |
| 1813 |
* &enum qlink_sta_info. Bitmap is carried separately in a payload of |
| 1814 |
* QTN_TLV_ID_BITMAP. |
| 1815 |
*/ |
| 1816 |
struct qlink_sta_stats { |
| 1817 |
__le64 rx_bytes; |
| 1818 |
__le64 tx_bytes; |
| 1819 |
__le64 rx_beacon; |
| 1820 |
__le64 rx_duration; |
| 1821 |
__le64 t_offset; |
| 1822 |
__le32 connected_time; |
| 1823 |
__le32 inactive_time; |
| 1824 |
__le32 rx_packets; |
| 1825 |
__le32 tx_packets; |
| 1826 |
__le32 tx_retries; |
| 1827 |
__le32 tx_failed; |
| 1828 |
__le32 rx_dropped_misc; |
| 1829 |
__le32 beacon_loss_count; |
| 1830 |
__le32 expected_throughput; |
| 1831 |
struct qlink_sta_info_state sta_flags; |
| 1832 |
struct qlink_sta_info_rate txrate; |
| 1833 |
struct qlink_sta_info_rate rxrate; |
| 1834 |
__le16 llid; |
| 1835 |
__le16 plid; |
| 1836 |
u8 local_pm; |
| 1837 |
u8 peer_pm; |
| 1838 |
u8 nonpeer_pm; |
| 1839 |
u8 rx_beacon_signal_avg; |
| 1840 |
u8 plink_state; |
| 1841 |
u8 signal; |
| 1842 |
u8 signal_avg; |
| 1843 |
u8 rsvd[1]; |
| 1844 |
}; |
| 1845 |
|
| 1846 |
/** |
| 1847 |
* struct qlink_random_mac_addr - data for QTN_TLV_ID_RANDOM_MAC_ADDR TLV |
| 1848 |
* |
| 1849 |
* Specifies MAC address mask/value for generation random MAC address |
| 1850 |
* during scan. |
| 1851 |
* |
| 1852 |
* @mac_addr: MAC address used with randomisation |
| 1853 |
* @mac_addr_mask: MAC address mask used with randomisation, bits that |
| 1854 |
* are 0 in the mask should be randomised, bits that are 1 should |
| 1855 |
* be taken from the @mac_addr |
| 1856 |
*/ |
| 1857 |
struct qlink_random_mac_addr { |
| 1858 |
u8 mac_addr[ETH_ALEN]; |
| 1859 |
u8 mac_addr_mask[ETH_ALEN]; |
| 1860 |
} __packed; |
| 1861 |
|
| 1862 |
/** |
| 1863 |
* struct qlink_wowlan_capab_data - data for QTN_TLV_ID_WOWLAN_CAPAB TLV |
| 1864 |
* |
| 1865 |
* WoWLAN capabilities supported by cards. |
| 1866 |
* |
| 1867 |
* @version: version of WoWLAN data structure, to ensure backward |
| 1868 |
* compatibility for firmwares with limited WoWLAN support |
| 1869 |
* @len: Total length of WoWLAN data |
| 1870 |
* @data: supported WoWLAN features |
| 1871 |
*/ |
| 1872 |
struct qlink_wowlan_capab_data { |
| 1873 |
__le16 version; |
| 1874 |
__le16 len; |
| 1875 |
u8 data[]; |
| 1876 |
} __packed; |
| 1877 |
|
| 1878 |
/** |
| 1879 |
* struct qlink_wowlan_support - supported WoWLAN capabilities |
| 1880 |
* |
| 1881 |
* @n_patterns: number of supported wakeup patterns |
| 1882 |
* @pattern_max_len: maximum length of each pattern |
| 1883 |
* @pattern_min_len: minimum length of each pattern |
| 1884 |
*/ |
| 1885 |
struct qlink_wowlan_support { |
| 1886 |
__le32 n_patterns; |
| 1887 |
__le32 pattern_max_len; |
| 1888 |
__le32 pattern_min_len; |
| 1889 |
} __packed; |
| 1890 |
|
| 1891 |
#endif /* _QTN_QLINK_H_ */ |