| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* (c) Copyright 2002-2010, Ralink Technology, Inc. |
| 4 |
* Copyright (C) 2014 Felix Fietkau <[email protected]> |
| 5 |
* Copyright (C) 2015 Jakub Kicinski <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "mt7601u.h" |
| 9 |
#include "mcu.h" |
| 10 |
#include "eeprom.h" |
| 11 |
#include "trace.h" |
| 12 |
#include "initvals_phy.h" |
| 13 |
|
| 14 |
#include <linux/etherdevice.h> |
| 15 |
|
| 16 |
static void mt7601u_agc_reset(struct mt7601u_dev *dev); |
| 17 |
|
| 18 |
static int |
| 19 |
mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value) |
| 20 |
{ |
| 21 |
int ret = 0; |
| 22 |
|
| 23 |
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || |
| 24 |
WARN_ON(offset > 63)) |
| 25 |
return -EINVAL; |
| 26 |
if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) |
| 27 |
return 0; |
| 28 |
|
| 29 |
mutex_lock(&dev->reg_atomic_mutex); |
| 30 |
|
| 31 |
if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) { |
| 32 |
ret = -ETIMEDOUT; |
| 33 |
goto out; |
| 34 |
} |
| 35 |
|
| 36 |
mt7601u_wr(dev, MT_RF_CSR_CFG, |
| 37 |
FIELD_PREP(MT_RF_CSR_CFG_DATA, value) | |
| 38 |
FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | |
| 39 |
FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | |
| 40 |
MT_RF_CSR_CFG_WR | |
| 41 |
MT_RF_CSR_CFG_KICK); |
| 42 |
trace_rf_write(dev, bank, offset, value); |
| 43 |
out: |
| 44 |
mutex_unlock(&dev->reg_atomic_mutex); |
| 45 |
|
| 46 |
if (ret < 0) |
| 47 |
dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n", |
| 48 |
bank, offset, ret); |
| 49 |
|
| 50 |
return ret; |
| 51 |
} |
| 52 |
|
| 53 |
static int |
| 54 |
mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset) |
| 55 |
{ |
| 56 |
int ret = -ETIMEDOUT; |
| 57 |
u32 val; |
| 58 |
|
| 59 |
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || |
| 60 |
WARN_ON(offset > 63)) |
| 61 |
return -EINVAL; |
| 62 |
if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) |
| 63 |
return 0xff; |
| 64 |
|
| 65 |
mutex_lock(&dev->reg_atomic_mutex); |
| 66 |
|
| 67 |
if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) |
| 68 |
goto out; |
| 69 |
|
| 70 |
mt7601u_wr(dev, MT_RF_CSR_CFG, |
| 71 |
FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | |
| 72 |
FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | |
| 73 |
MT_RF_CSR_CFG_KICK); |
| 74 |
|
| 75 |
if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) |
| 76 |
goto out; |
| 77 |
|
| 78 |
val = mt7601u_rr(dev, MT_RF_CSR_CFG); |
| 79 |
if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset && |
| 80 |
FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) { |
| 81 |
ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val); |
| 82 |
trace_rf_read(dev, bank, offset, ret); |
| 83 |
} |
| 84 |
out: |
| 85 |
mutex_unlock(&dev->reg_atomic_mutex); |
| 86 |
|
| 87 |
if (ret < 0) |
| 88 |
dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n", |
| 89 |
bank, offset, ret); |
| 90 |
|
| 91 |
return ret; |
| 92 |
} |
| 93 |
|
| 94 |
static int |
| 95 |
mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val) |
| 96 |
{ |
| 97 |
int ret; |
| 98 |
|
| 99 |
ret = mt7601u_rf_rr(dev, bank, offset); |
| 100 |
if (ret < 0) |
| 101 |
return ret; |
| 102 |
val |= ret & ~mask; |
| 103 |
ret = mt7601u_rf_wr(dev, bank, offset, val); |
| 104 |
if (ret) |
| 105 |
return ret; |
| 106 |
|
| 107 |
return val; |
| 108 |
} |
| 109 |
|
| 110 |
static int |
| 111 |
mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val) |
| 112 |
{ |
| 113 |
return mt7601u_rf_rmw(dev, bank, offset, 0, val); |
| 114 |
} |
| 115 |
|
| 116 |
static int |
| 117 |
mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask) |
| 118 |
{ |
| 119 |
return mt7601u_rf_rmw(dev, bank, offset, mask, 0); |
| 120 |
} |
| 121 |
|
| 122 |
static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val) |
| 123 |
{ |
| 124 |
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || |
| 125 |
test_bit(MT7601U_STATE_REMOVED, &dev->state)) |
| 126 |
return; |
| 127 |
|
| 128 |
mutex_lock(&dev->reg_atomic_mutex); |
| 129 |
|
| 130 |
if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) { |
| 131 |
dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset); |
| 132 |
goto out; |
| 133 |
} |
| 134 |
|
| 135 |
mt7601u_wr(dev, MT_BBP_CSR_CFG, |
| 136 |
FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) | |
| 137 |
FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | |
| 138 |
MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY); |
| 139 |
trace_bbp_write(dev, offset, val); |
| 140 |
out: |
| 141 |
mutex_unlock(&dev->reg_atomic_mutex); |
| 142 |
} |
| 143 |
|
| 144 |
static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset) |
| 145 |
{ |
| 146 |
u32 val; |
| 147 |
int ret = -ETIMEDOUT; |
| 148 |
|
| 149 |
if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state))) |
| 150 |
return -EINVAL; |
| 151 |
if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) |
| 152 |
return 0xff; |
| 153 |
|
| 154 |
mutex_lock(&dev->reg_atomic_mutex); |
| 155 |
|
| 156 |
if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) |
| 157 |
goto out; |
| 158 |
|
| 159 |
mt7601u_wr(dev, MT_BBP_CSR_CFG, |
| 160 |
FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | |
| 161 |
MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY | |
| 162 |
MT_BBP_CSR_CFG_READ); |
| 163 |
|
| 164 |
if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) |
| 165 |
goto out; |
| 166 |
|
| 167 |
val = mt7601u_rr(dev, MT_BBP_CSR_CFG); |
| 168 |
if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) { |
| 169 |
ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val); |
| 170 |
trace_bbp_read(dev, offset, ret); |
| 171 |
} |
| 172 |
out: |
| 173 |
mutex_unlock(&dev->reg_atomic_mutex); |
| 174 |
|
| 175 |
if (ret < 0) |
| 176 |
dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n", |
| 177 |
offset, ret); |
| 178 |
|
| 179 |
return ret; |
| 180 |
} |
| 181 |
|
| 182 |
static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) |
| 183 |
{ |
| 184 |
int ret; |
| 185 |
|
| 186 |
ret = mt7601u_bbp_rr(dev, offset); |
| 187 |
if (ret < 0) |
| 188 |
return ret; |
| 189 |
val |= ret & ~mask; |
| 190 |
mt7601u_bbp_wr(dev, offset, val); |
| 191 |
|
| 192 |
return val; |
| 193 |
} |
| 194 |
|
| 195 |
static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) |
| 196 |
{ |
| 197 |
int ret; |
| 198 |
|
| 199 |
ret = mt7601u_bbp_rr(dev, offset); |
| 200 |
if (ret < 0) |
| 201 |
return ret; |
| 202 |
val |= ret & ~mask; |
| 203 |
if (ret != val) |
| 204 |
mt7601u_bbp_wr(dev, offset, val); |
| 205 |
|
| 206 |
return val; |
| 207 |
} |
| 208 |
|
| 209 |
int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev) |
| 210 |
{ |
| 211 |
int i = 20; |
| 212 |
u8 val; |
| 213 |
|
| 214 |
do { |
| 215 |
val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION); |
| 216 |
if (val && val != 0xff) |
| 217 |
break; |
| 218 |
} while (--i); |
| 219 |
|
| 220 |
if (!i) { |
| 221 |
dev_err(dev->dev, "Error: BBP is not ready\n"); |
| 222 |
return -EIO; |
| 223 |
} |
| 224 |
|
| 225 |
return 0; |
| 226 |
} |
| 227 |
|
| 228 |
u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below) |
| 229 |
{ |
| 230 |
return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0); |
| 231 |
} |
| 232 |
|
| 233 |
int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, |
| 234 |
struct mt7601u_rxwi *rxwi, u16 rate) |
| 235 |
{ |
| 236 |
static const s8 lna[2][2][3] = { |
| 237 |
/* main LNA */ { |
| 238 |
/* bw20 */ { -2, 15, 33 }, |
| 239 |
/* bw40 */ { 0, 16, 34 } |
| 240 |
}, |
| 241 |
/* aux LNA */ { |
| 242 |
/* bw20 */ { -2, 15, 33 }, |
| 243 |
/* bw40 */ { -2, 16, 34 } |
| 244 |
} |
| 245 |
}; |
| 246 |
int bw = FIELD_GET(MT_RXWI_RATE_BW, rate); |
| 247 |
int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant); |
| 248 |
int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain); |
| 249 |
int val; |
| 250 |
|
| 251 |
if (lna_id) /* LNA id can be 0, 2, 3. */ |
| 252 |
lna_id--; |
| 253 |
|
| 254 |
val = 8; |
| 255 |
val -= lna[aux_lna][bw][lna_id]; |
| 256 |
val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain); |
| 257 |
val -= dev->ee->lna_gain; |
| 258 |
val -= dev->ee->rssi_offset[0]; |
| 259 |
|
| 260 |
return val; |
| 261 |
} |
| 262 |
|
| 263 |
static void mt7601u_vco_cal(struct mt7601u_dev *dev) |
| 264 |
{ |
| 265 |
mt7601u_rf_wr(dev, 0, 4, 0x0a); |
| 266 |
mt7601u_rf_wr(dev, 0, 5, 0x20); |
| 267 |
mt7601u_rf_set(dev, 0, 4, BIT(7)); |
| 268 |
msleep(2); |
| 269 |
} |
| 270 |
|
| 271 |
static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal) |
| 272 |
{ |
| 273 |
u32 filter = 0; |
| 274 |
int ret; |
| 275 |
|
| 276 |
if (!cal) |
| 277 |
filter |= 0x10000; |
| 278 |
if (dev->bw != MT_BW_20) |
| 279 |
filter |= 0x00100; |
| 280 |
|
| 281 |
/* TX */ |
| 282 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1); |
| 283 |
if (ret) |
| 284 |
return ret; |
| 285 |
/* RX */ |
| 286 |
return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter); |
| 287 |
} |
| 288 |
|
| 289 |
static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev) |
| 290 |
{ |
| 291 |
const struct reg_table *t; |
| 292 |
|
| 293 |
if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW)) |
| 294 |
return -EINVAL; |
| 295 |
|
| 296 |
t = &bbp_mode_table[dev->temp_mode][dev->bw]; |
| 297 |
|
| 298 |
return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n); |
| 299 |
} |
| 300 |
|
| 301 |
static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name) |
| 302 |
{ |
| 303 |
const struct reg_table *t; |
| 304 |
int ret; |
| 305 |
|
| 306 |
if (dev->temp_mode == mode) |
| 307 |
return 0; |
| 308 |
|
| 309 |
dev->temp_mode = mode; |
| 310 |
trace_temp_mode(dev, mode); |
| 311 |
|
| 312 |
t = bbp_mode_table[dev->temp_mode]; |
| 313 |
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, |
| 314 |
t[2].regs, t[2].n); |
| 315 |
if (ret) |
| 316 |
return ret; |
| 317 |
|
| 318 |
return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, |
| 319 |
t[dev->bw].regs, t[dev->bw].n); |
| 320 |
} |
| 321 |
|
| 322 |
static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan) |
| 323 |
{ |
| 324 |
struct mt7601u_rate_power *t = &dev->ee->power_rate_table; |
| 325 |
|
| 326 |
if (hw_chan != 14 || dev->bw != MT_BW_20) { |
| 327 |
mt7601u_bbp_rmw(dev, 4, 0x20, 0); |
| 328 |
mt7601u_bbp_wr(dev, 178, 0xff); |
| 329 |
|
| 330 |
t->cck[0].bw20 = dev->ee->real_cck_bw20[0]; |
| 331 |
t->cck[1].bw20 = dev->ee->real_cck_bw20[1]; |
| 332 |
} else { /* Apply CH14 OBW fixup */ |
| 333 |
mt7601u_bbp_wr(dev, 4, 0x60); |
| 334 |
mt7601u_bbp_wr(dev, 178, 0); |
| 335 |
|
| 336 |
/* Note: vendor code is buggy here for negative values */ |
| 337 |
t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2; |
| 338 |
t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2; |
| 339 |
} |
| 340 |
} |
| 341 |
|
| 342 |
static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev, |
| 343 |
struct cfg80211_chan_def *chandef) |
| 344 |
{ |
| 345 |
#define FREQ_PLAN_REGS 4 |
| 346 |
static const u8 freq_plan[14][FREQ_PLAN_REGS] = { |
| 347 |
{ 0x99, 0x99, 0x09, 0x50 }, |
| 348 |
{ 0x46, 0x44, 0x0a, 0x50 }, |
| 349 |
{ 0xec, 0xee, 0x0a, 0x50 }, |
| 350 |
{ 0x99, 0x99, 0x0b, 0x50 }, |
| 351 |
{ 0x46, 0x44, 0x08, 0x51 }, |
| 352 |
{ 0xec, 0xee, 0x08, 0x51 }, |
| 353 |
{ 0x99, 0x99, 0x09, 0x51 }, |
| 354 |
{ 0x46, 0x44, 0x0a, 0x51 }, |
| 355 |
{ 0xec, 0xee, 0x0a, 0x51 }, |
| 356 |
{ 0x99, 0x99, 0x0b, 0x51 }, |
| 357 |
{ 0x46, 0x44, 0x08, 0x52 }, |
| 358 |
{ 0xec, 0xee, 0x08, 0x52 }, |
| 359 |
{ 0x99, 0x99, 0x09, 0x52 }, |
| 360 |
{ 0x33, 0x33, 0x0b, 0x52 }, |
| 361 |
}; |
| 362 |
struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = { |
| 363 |
{ 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 }, |
| 364 |
}; |
| 365 |
struct mt76_reg_pair bbp_settings[3] = { |
| 366 |
{ 62, 0x37 - dev->ee->lna_gain }, |
| 367 |
{ 63, 0x37 - dev->ee->lna_gain }, |
| 368 |
{ 64, 0x37 - dev->ee->lna_gain }, |
| 369 |
}; |
| 370 |
|
| 371 |
struct ieee80211_channel *chan = chandef->chan; |
| 372 |
enum nl80211_channel_type chan_type = |
| 373 |
cfg80211_get_chandef_type(chandef); |
| 374 |
struct mt7601u_rate_power *t = &dev->ee->power_rate_table; |
| 375 |
int chan_idx; |
| 376 |
bool chan_ext_below; |
| 377 |
u8 bw; |
| 378 |
int i, ret; |
| 379 |
|
| 380 |
bw = MT_BW_20; |
| 381 |
chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS); |
| 382 |
chan_idx = chan->hw_value - 1; |
| 383 |
|
| 384 |
if (chandef->width == NL80211_CHAN_WIDTH_40) { |
| 385 |
bw = MT_BW_40; |
| 386 |
|
| 387 |
if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS) |
| 388 |
chan_idx -= 2; |
| 389 |
else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS) |
| 390 |
chan_idx += 2; |
| 391 |
else |
| 392 |
dev_err(dev->dev, "Error: invalid 40MHz channel!!\n"); |
| 393 |
} |
| 394 |
|
| 395 |
if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) { |
| 396 |
dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n", |
| 397 |
bw, chan_ext_below); |
| 398 |
|
| 399 |
mt7601u_bbp_set_bw(dev, bw); |
| 400 |
|
| 401 |
mt7601u_bbp_set_ctrlch(dev, chan_ext_below); |
| 402 |
mt7601u_mac_set_ctrlch(dev, chan_ext_below); |
| 403 |
dev->chan_ext_below = chan_ext_below; |
| 404 |
} |
| 405 |
|
| 406 |
for (i = 0; i < FREQ_PLAN_REGS; i++) |
| 407 |
channel_freq_plan[i].value = freq_plan[chan_idx][i]; |
| 408 |
|
| 409 |
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, |
| 410 |
channel_freq_plan, FREQ_PLAN_REGS); |
| 411 |
if (ret) |
| 412 |
return ret; |
| 413 |
|
| 414 |
mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f, |
| 415 |
dev->ee->chan_pwr[chan_idx] & 0x3f); |
| 416 |
|
| 417 |
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, |
| 418 |
bbp_settings, ARRAY_SIZE(bbp_settings)); |
| 419 |
if (ret) |
| 420 |
return ret; |
| 421 |
|
| 422 |
mt7601u_vco_cal(dev); |
| 423 |
mt7601u_bbp_set_bw(dev, bw); |
| 424 |
ret = mt7601u_set_bw_filter(dev, false); |
| 425 |
if (ret) |
| 426 |
return ret; |
| 427 |
|
| 428 |
mt7601u_apply_ch14_fixup(dev, chan->hw_value); |
| 429 |
mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 | |
| 430 |
int_to_s6(t->ofdm[0].bw20) << 16 | |
| 431 |
int_to_s6(t->cck[1].bw20) << 8 | |
| 432 |
int_to_s6(t->cck[0].bw20)); |
| 433 |
|
| 434 |
if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) |
| 435 |
mt7601u_agc_reset(dev); |
| 436 |
|
| 437 |
dev->chandef = *chandef; |
| 438 |
|
| 439 |
return 0; |
| 440 |
} |
| 441 |
|
| 442 |
int mt7601u_phy_set_channel(struct mt7601u_dev *dev, |
| 443 |
struct cfg80211_chan_def *chandef) |
| 444 |
{ |
| 445 |
int ret; |
| 446 |
|
| 447 |
cancel_delayed_work_sync(&dev->cal_work); |
| 448 |
cancel_delayed_work_sync(&dev->freq_cal.work); |
| 449 |
|
| 450 |
mutex_lock(&dev->hw_atomic_mutex); |
| 451 |
ret = __mt7601u_phy_set_channel(dev, chandef); |
| 452 |
mutex_unlock(&dev->hw_atomic_mutex); |
| 453 |
if (ret) |
| 454 |
return ret; |
| 455 |
|
| 456 |
if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) |
| 457 |
return 0; |
| 458 |
|
| 459 |
ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, |
| 460 |
MT_CALIBRATE_INTERVAL); |
| 461 |
if (dev->freq_cal.enabled) |
| 462 |
ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, |
| 463 |
MT_FREQ_CAL_INIT_DELAY); |
| 464 |
return 0; |
| 465 |
} |
| 466 |
|
| 467 |
#define BBP_R47_FLAG GENMASK(2, 0) |
| 468 |
#define BBP_R47_F_TSSI 0 |
| 469 |
#define BBP_R47_F_PKT_T 1 |
| 470 |
#define BBP_R47_F_TX_RATE 2 |
| 471 |
#define BBP_R47_F_TEMP 4 |
| 472 |
/** |
| 473 |
* mt7601u_bbp_r47_get - read value through BBP R47/R49 pair |
| 474 |
* @dev: pointer to adapter structure |
| 475 |
* @reg: value of BBP R47 before the operation |
| 476 |
* @flag: one of the BBP_R47_F_* flags |
| 477 |
* |
| 478 |
* Convenience helper for reading values through BBP R47/R49 pair. |
| 479 |
* Takes old value of BBP R47 as @reg, because callers usually have it |
| 480 |
* cached already. |
| 481 |
* |
| 482 |
* Return: value of BBP R49. |
| 483 |
*/ |
| 484 |
static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag) |
| 485 |
{ |
| 486 |
flag |= reg & ~BBP_R47_FLAG; |
| 487 |
mt7601u_bbp_wr(dev, 47, flag); |
| 488 |
usleep_range(500, 700); |
| 489 |
return mt7601u_bbp_rr(dev, 49); |
| 490 |
} |
| 491 |
|
| 492 |
static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev) |
| 493 |
{ |
| 494 |
u8 bbp_val, temp; |
| 495 |
u32 rf_bp, rf_set; |
| 496 |
int i; |
| 497 |
|
| 498 |
rf_set = mt7601u_rr(dev, MT_RF_SETTING_0); |
| 499 |
rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0); |
| 500 |
|
| 501 |
mt7601u_wr(dev, MT_RF_BYPASS_0, 0); |
| 502 |
mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010); |
| 503 |
mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010); |
| 504 |
|
| 505 |
bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10); |
| 506 |
|
| 507 |
mt7601u_bbp_wr(dev, 22, 0x40); |
| 508 |
|
| 509 |
for (i = 100; i && (bbp_val & 0x10); i--) |
| 510 |
bbp_val = mt7601u_bbp_rr(dev, 47); |
| 511 |
|
| 512 |
temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP); |
| 513 |
|
| 514 |
mt7601u_bbp_wr(dev, 22, 0); |
| 515 |
|
| 516 |
bbp_val = mt7601u_bbp_rr(dev, 21); |
| 517 |
bbp_val |= 0x02; |
| 518 |
mt7601u_bbp_wr(dev, 21, bbp_val); |
| 519 |
bbp_val &= ~0x02; |
| 520 |
mt7601u_bbp_wr(dev, 21, bbp_val); |
| 521 |
|
| 522 |
mt7601u_wr(dev, MT_RF_BYPASS_0, 0); |
| 523 |
mt7601u_wr(dev, MT_RF_SETTING_0, rf_set); |
| 524 |
mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp); |
| 525 |
|
| 526 |
trace_read_temp(dev, temp); |
| 527 |
return temp; |
| 528 |
} |
| 529 |
|
| 530 |
static s8 mt7601u_read_temp(struct mt7601u_dev *dev) |
| 531 |
{ |
| 532 |
int i; |
| 533 |
u8 val; |
| 534 |
s8 temp; |
| 535 |
|
| 536 |
val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10); |
| 537 |
|
| 538 |
/* Note: this rarely succeeds, temp can change even if it fails. */ |
| 539 |
for (i = 100; i && (val & 0x10); i--) |
| 540 |
val = mt7601u_bbp_rr(dev, 47); |
| 541 |
|
| 542 |
temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP); |
| 543 |
|
| 544 |
trace_read_temp(dev, temp); |
| 545 |
return temp; |
| 546 |
} |
| 547 |
|
| 548 |
static void mt7601u_rxdc_cal(struct mt7601u_dev *dev) |
| 549 |
{ |
| 550 |
static const struct mt76_reg_pair intro[] = { |
| 551 |
{ 158, 0x8d }, { 159, 0xfc }, |
| 552 |
{ 158, 0x8c }, { 159, 0x4c }, |
| 553 |
}, outro[] = { |
| 554 |
{ 158, 0x8d }, { 159, 0xe0 }, |
| 555 |
}; |
| 556 |
u32 mac_ctrl; |
| 557 |
int i, ret; |
| 558 |
|
| 559 |
mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); |
| 560 |
mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX); |
| 561 |
|
| 562 |
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, |
| 563 |
intro, ARRAY_SIZE(intro)); |
| 564 |
if (ret) |
| 565 |
dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret); |
| 566 |
|
| 567 |
for (i = 20; i; i--) { |
| 568 |
usleep_range(300, 500); |
| 569 |
|
| 570 |
mt7601u_bbp_wr(dev, 158, 0x8c); |
| 571 |
if (mt7601u_bbp_rr(dev, 159) == 0x0c) |
| 572 |
break; |
| 573 |
} |
| 574 |
if (!i) |
| 575 |
dev_err(dev->dev, "%s timed out\n", __func__); |
| 576 |
|
| 577 |
mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); |
| 578 |
|
| 579 |
ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, |
| 580 |
outro, ARRAY_SIZE(outro)); |
| 581 |
if (ret) |
| 582 |
dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret); |
| 583 |
|
| 584 |
mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); |
| 585 |
} |
| 586 |
|
| 587 |
void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev) |
| 588 |
{ |
| 589 |
if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) |
| 590 |
return; |
| 591 |
|
| 592 |
mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp); |
| 593 |
|
| 594 |
mt7601u_rxdc_cal(dev); |
| 595 |
} |
| 596 |
|
| 597 |
/* Note: function copied from vendor driver */ |
| 598 |
static s16 lin2dBd(u16 linear) |
| 599 |
{ |
| 600 |
short exp = 0; |
| 601 |
unsigned int mantisa; |
| 602 |
int app, dBd; |
| 603 |
|
| 604 |
if (WARN_ON(!linear)) |
| 605 |
return -10000; |
| 606 |
|
| 607 |
mantisa = linear; |
| 608 |
|
| 609 |
exp = fls(mantisa) - 16; |
| 610 |
if (exp > 0) |
| 611 |
mantisa >>= exp; |
| 612 |
else |
| 613 |
mantisa <<= abs(exp); |
| 614 |
|
| 615 |
if (mantisa <= 0xb800) |
| 616 |
app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600); |
| 617 |
else |
| 618 |
app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00); |
| 619 |
if (app < 0) |
| 620 |
app = 0; |
| 621 |
|
| 622 |
dBd = ((15 + exp) << 15) + app; |
| 623 |
dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7); |
| 624 |
dBd = (dBd >> 10); |
| 625 |
|
| 626 |
return dBd; |
| 627 |
} |
| 628 |
|
| 629 |
static void |
| 630 |
mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db) |
| 631 |
{ |
| 632 |
struct tssi_data *d = &dev->ee->tssi_data; |
| 633 |
int init_offset; |
| 634 |
|
| 635 |
init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10; |
| 636 |
|
| 637 |
mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, |
| 638 |
int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP); |
| 639 |
} |
| 640 |
|
| 641 |
static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev) |
| 642 |
{ |
| 643 |
u8 rf_vga, rf_mixer, bbp_r47; |
| 644 |
int i, j; |
| 645 |
s8 res[4]; |
| 646 |
s16 tssi_init_db, tssi_init_hvga_db; |
| 647 |
|
| 648 |
mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030); |
| 649 |
mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030); |
| 650 |
mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); |
| 651 |
|
| 652 |
mt7601u_bbp_wr(dev, 58, 0); |
| 653 |
mt7601u_bbp_wr(dev, 241, 0x2); |
| 654 |
mt7601u_bbp_wr(dev, 23, 0x8); |
| 655 |
bbp_r47 = mt7601u_bbp_rr(dev, 47); |
| 656 |
|
| 657 |
/* Set VGA gain */ |
| 658 |
rf_vga = mt7601u_rf_rr(dev, 5, 3); |
| 659 |
mt7601u_rf_wr(dev, 5, 3, 8); |
| 660 |
|
| 661 |
/* Mixer disable */ |
| 662 |
rf_mixer = mt7601u_rf_rr(dev, 4, 39); |
| 663 |
mt7601u_rf_wr(dev, 4, 39, 0); |
| 664 |
|
| 665 |
for (i = 0; i < 4; i++) { |
| 666 |
mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0); |
| 667 |
|
| 668 |
mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02); |
| 669 |
mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11); |
| 670 |
|
| 671 |
/* BBP TSSI initial and soft reset */ |
| 672 |
mt7601u_bbp_wr(dev, 22, 0); |
| 673 |
mt7601u_bbp_wr(dev, 244, 0); |
| 674 |
|
| 675 |
mt7601u_bbp_wr(dev, 21, 1); |
| 676 |
udelay(1); |
| 677 |
mt7601u_bbp_wr(dev, 21, 0); |
| 678 |
|
| 679 |
/* TSSI measurement */ |
| 680 |
mt7601u_bbp_wr(dev, 47, 0x50); |
| 681 |
mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40); |
| 682 |
|
| 683 |
for (j = 20; j; j--) |
| 684 |
if (!(mt7601u_bbp_rr(dev, 47) & 0x10)) |
| 685 |
break; |
| 686 |
if (!j) |
| 687 |
dev_err(dev->dev, "%s timed out\n", __func__); |
| 688 |
|
| 689 |
/* TSSI read */ |
| 690 |
mt7601u_bbp_wr(dev, 47, 0x40); |
| 691 |
res[i] = mt7601u_bbp_rr(dev, 49); |
| 692 |
} |
| 693 |
|
| 694 |
tssi_init_db = lin2dBd((short)res[1] - res[0]); |
| 695 |
tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4); |
| 696 |
dev->tssi_init = res[0]; |
| 697 |
dev->tssi_init_hvga = res[2]; |
| 698 |
dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db; |
| 699 |
|
| 700 |
dev_dbg(dev->dev, |
| 701 |
"TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n", |
| 702 |
dev->tssi_init, tssi_init_db, dev->tssi_init_hvga, |
| 703 |
tssi_init_hvga_db, dev->tssi_init_hvga_offset_db); |
| 704 |
|
| 705 |
mt7601u_bbp_wr(dev, 22, 0); |
| 706 |
mt7601u_bbp_wr(dev, 244, 0); |
| 707 |
|
| 708 |
mt7601u_bbp_wr(dev, 21, 1); |
| 709 |
udelay(1); |
| 710 |
mt7601u_bbp_wr(dev, 21, 0); |
| 711 |
|
| 712 |
mt7601u_wr(dev, MT_RF_BYPASS_0, 0); |
| 713 |
mt7601u_wr(dev, MT_RF_SETTING_0, 0); |
| 714 |
|
| 715 |
mt7601u_rf_wr(dev, 5, 3, rf_vga); |
| 716 |
mt7601u_rf_wr(dev, 4, 39, rf_mixer); |
| 717 |
mt7601u_bbp_wr(dev, 47, bbp_r47); |
| 718 |
|
| 719 |
mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db); |
| 720 |
} |
| 721 |
|
| 722 |
static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on) |
| 723 |
{ |
| 724 |
int ret, temp, hi_temp = 400, lo_temp = -200; |
| 725 |
|
| 726 |
temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE; |
| 727 |
dev->curr_temp = temp; |
| 728 |
|
| 729 |
/* DPD Calibration */ |
| 730 |
if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) { |
| 731 |
dev->dpd_temp = temp; |
| 732 |
|
| 733 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); |
| 734 |
if (ret) |
| 735 |
return ret; |
| 736 |
|
| 737 |
mt7601u_vco_cal(dev); |
| 738 |
|
| 739 |
dev_dbg(dev->dev, "Recalibrate DPD\n"); |
| 740 |
} |
| 741 |
|
| 742 |
/* PLL Lock Protect */ |
| 743 |
if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */ |
| 744 |
dev->pll_lock_protect = true; |
| 745 |
|
| 746 |
mt7601u_rf_wr(dev, 4, 4, 6); |
| 747 |
mt7601u_rf_clear(dev, 4, 10, 0x30); |
| 748 |
|
| 749 |
dev_dbg(dev->dev, "PLL lock protect on - too cold\n"); |
| 750 |
} else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */ |
| 751 |
dev->pll_lock_protect = false; |
| 752 |
|
| 753 |
mt7601u_rf_wr(dev, 4, 4, 0); |
| 754 |
mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10); |
| 755 |
|
| 756 |
dev_dbg(dev->dev, "PLL lock protect off\n"); |
| 757 |
} |
| 758 |
|
| 759 |
if (on) { |
| 760 |
hi_temp -= 50; |
| 761 |
lo_temp -= 50; |
| 762 |
} |
| 763 |
|
| 764 |
/* BBP CR for H, L, N temperature */ |
| 765 |
if (temp > hi_temp) |
| 766 |
return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high"); |
| 767 |
else if (temp > lo_temp) |
| 768 |
return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal"); |
| 769 |
else |
| 770 |
return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low"); |
| 771 |
} |
| 772 |
|
| 773 |
/* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */ |
| 774 |
static int mt7601u_current_tx_power(struct mt7601u_dev *dev) |
| 775 |
{ |
| 776 |
return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1]; |
| 777 |
} |
| 778 |
|
| 779 |
static bool mt7601u_use_hvga(struct mt7601u_dev *dev) |
| 780 |
{ |
| 781 |
return !(mt7601u_current_tx_power(dev) > 20); |
| 782 |
} |
| 783 |
|
| 784 |
static s16 |
| 785 |
mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate) |
| 786 |
{ |
| 787 |
static const s16 decode_tb[] = { 0, 8847, -5734, -5734 }; |
| 788 |
u32 reg; |
| 789 |
|
| 790 |
switch (phy_mode) { |
| 791 |
case MT_PHY_TYPE_OFDM: |
| 792 |
tx_rate += 4; |
| 793 |
fallthrough; |
| 794 |
case MT_PHY_TYPE_CCK: |
| 795 |
reg = dev->rf_pa_mode[0]; |
| 796 |
break; |
| 797 |
default: |
| 798 |
reg = dev->rf_pa_mode[1]; |
| 799 |
break; |
| 800 |
} |
| 801 |
|
| 802 |
return decode_tb[(reg >> (tx_rate * 2)) & 0x3]; |
| 803 |
} |
| 804 |
|
| 805 |
static struct mt7601u_tssi_params |
| 806 |
mt7601u_tssi_params_get(struct mt7601u_dev *dev) |
| 807 |
{ |
| 808 |
static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 }; |
| 809 |
static const int static_power[4] = { 0, -49152, -98304, 49152 }; |
| 810 |
struct mt7601u_tssi_params p; |
| 811 |
u8 bbp_r47, pkt_type, tx_rate; |
| 812 |
struct power_per_rate *rate_table; |
| 813 |
|
| 814 |
bbp_r47 = mt7601u_bbp_rr(dev, 47); |
| 815 |
|
| 816 |
p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI); |
| 817 |
dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP); |
| 818 |
pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T); |
| 819 |
|
| 820 |
p.trgt_power = mt7601u_current_tx_power(dev); |
| 821 |
|
| 822 |
switch (pkt_type & 0x03) { |
| 823 |
case MT_PHY_TYPE_CCK: |
| 824 |
tx_rate = (pkt_type >> 4) & 0x03; |
| 825 |
rate_table = dev->ee->power_rate_table.cck; |
| 826 |
break; |
| 827 |
|
| 828 |
case MT_PHY_TYPE_OFDM: |
| 829 |
tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07]; |
| 830 |
rate_table = dev->ee->power_rate_table.ofdm; |
| 831 |
break; |
| 832 |
|
| 833 |
default: |
| 834 |
tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE); |
| 835 |
tx_rate &= 0x7f; |
| 836 |
rate_table = dev->ee->power_rate_table.ht; |
| 837 |
break; |
| 838 |
} |
| 839 |
|
| 840 |
if (dev->bw == MT_BW_20) |
| 841 |
p.trgt_power += rate_table[tx_rate / 2].bw20; |
| 842 |
else |
| 843 |
p.trgt_power += rate_table[tx_rate / 2].bw40; |
| 844 |
|
| 845 |
p.trgt_power <<= 12; |
| 846 |
|
| 847 |
dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power); |
| 848 |
|
| 849 |
p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03, |
| 850 |
tx_rate); |
| 851 |
|
| 852 |
/* Channel 14, cck, bw20 */ |
| 853 |
if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) { |
| 854 |
if (mt7601u_bbp_rr(dev, 4) & 0x20) |
| 855 |
p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830; |
| 856 |
else |
| 857 |
p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576; |
| 858 |
} |
| 859 |
|
| 860 |
p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03]; |
| 861 |
|
| 862 |
p.trgt_power += dev->ee->tssi_data.tx0_delta_offset; |
| 863 |
|
| 864 |
dev_dbg(dev->dev, |
| 865 |
"tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n", |
| 866 |
p.tssi0, p.trgt_power, dev->raw_temp, pkt_type); |
| 867 |
|
| 868 |
return p; |
| 869 |
} |
| 870 |
|
| 871 |
static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev) |
| 872 |
{ |
| 873 |
return !(mt7601u_bbp_rr(dev, 47) & 0x10); |
| 874 |
} |
| 875 |
|
| 876 |
static int mt7601u_tssi_cal(struct mt7601u_dev *dev) |
| 877 |
{ |
| 878 |
struct mt7601u_tssi_params params; |
| 879 |
int curr_pwr, diff_pwr; |
| 880 |
char tssi_offset; |
| 881 |
s8 tssi_init; |
| 882 |
s16 tssi_m_dc, tssi_db; |
| 883 |
bool hvga; |
| 884 |
u32 val; |
| 885 |
|
| 886 |
if (!dev->ee->tssi_enabled) |
| 887 |
return 0; |
| 888 |
|
| 889 |
hvga = mt7601u_use_hvga(dev); |
| 890 |
if (!dev->tssi_read_trig) |
| 891 |
return mt7601u_mcu_tssi_read_kick(dev, hvga); |
| 892 |
|
| 893 |
if (!mt7601u_tssi_read_ready(dev)) |
| 894 |
return 0; |
| 895 |
|
| 896 |
params = mt7601u_tssi_params_get(dev); |
| 897 |
|
| 898 |
tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init); |
| 899 |
tssi_m_dc = params.tssi0 - tssi_init; |
| 900 |
tssi_db = lin2dBd(tssi_m_dc); |
| 901 |
dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n", |
| 902 |
tssi_m_dc, tssi_db, hvga); |
| 903 |
|
| 904 |
if (dev->chandef.chan->hw_value < 5) |
| 905 |
tssi_offset = dev->ee->tssi_data.offset[0]; |
| 906 |
else if (dev->chandef.chan->hw_value < 9) |
| 907 |
tssi_offset = dev->ee->tssi_data.offset[1]; |
| 908 |
else |
| 909 |
tssi_offset = dev->ee->tssi_data.offset[2]; |
| 910 |
|
| 911 |
if (hvga) |
| 912 |
tssi_db -= dev->tssi_init_hvga_offset_db; |
| 913 |
|
| 914 |
curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9); |
| 915 |
diff_pwr = params.trgt_power - curr_pwr; |
| 916 |
dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr); |
| 917 |
|
| 918 |
if (params.tssi0 > 126 && diff_pwr > 0) { |
| 919 |
dev_err(dev->dev, "Error: TSSI upper saturation\n"); |
| 920 |
diff_pwr = 0; |
| 921 |
} |
| 922 |
if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) { |
| 923 |
dev_err(dev->dev, "Error: TSSI lower saturation\n"); |
| 924 |
diff_pwr = 0; |
| 925 |
} |
| 926 |
|
| 927 |
if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 && |
| 928 |
(abs(diff_pwr) > abs(dev->prev_pwr_diff) || |
| 929 |
(diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff))) |
| 930 |
diff_pwr = 0; |
| 931 |
else |
| 932 |
dev->prev_pwr_diff = diff_pwr; |
| 933 |
|
| 934 |
diff_pwr += (diff_pwr > 0) ? 2048 : -2048; |
| 935 |
diff_pwr /= 4096; |
| 936 |
|
| 937 |
dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr); |
| 938 |
|
| 939 |
val = mt7601u_rr(dev, MT_TX_ALC_CFG_1); |
| 940 |
curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val)); |
| 941 |
diff_pwr += curr_pwr; |
| 942 |
val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr); |
| 943 |
mt7601u_wr(dev, MT_TX_ALC_CFG_1, val); |
| 944 |
|
| 945 |
return mt7601u_mcu_tssi_read_kick(dev, hvga); |
| 946 |
} |
| 947 |
|
| 948 |
static u8 mt7601u_agc_default(struct mt7601u_dev *dev) |
| 949 |
{ |
| 950 |
return (dev->ee->lna_gain - 8) * 2 + 0x34; |
| 951 |
} |
| 952 |
|
| 953 |
static void mt7601u_agc_reset(struct mt7601u_dev *dev) |
| 954 |
{ |
| 955 |
u8 agc = mt7601u_agc_default(dev); |
| 956 |
|
| 957 |
mt7601u_bbp_wr(dev, 66, agc); |
| 958 |
} |
| 959 |
|
| 960 |
void mt7601u_agc_save(struct mt7601u_dev *dev) |
| 961 |
{ |
| 962 |
dev->agc_save = mt7601u_bbp_rr(dev, 66); |
| 963 |
} |
| 964 |
|
| 965 |
void mt7601u_agc_restore(struct mt7601u_dev *dev) |
| 966 |
{ |
| 967 |
mt7601u_bbp_wr(dev, 66, dev->agc_save); |
| 968 |
} |
| 969 |
|
| 970 |
static void mt7601u_agc_tune(struct mt7601u_dev *dev) |
| 971 |
{ |
| 972 |
u8 val = mt7601u_agc_default(dev); |
| 973 |
long avg_rssi; |
| 974 |
|
| 975 |
if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) |
| 976 |
return; |
| 977 |
|
| 978 |
/* Note: only in STA mode and not dozing; perhaps do this only if |
| 979 |
* there is enough rssi updates since last run? |
| 980 |
* Rssi updates are only on beacons and U2M so should work... |
| 981 |
*/ |
| 982 |
spin_lock_bh(&dev->con_mon_lock); |
| 983 |
avg_rssi = ewma_rssi_read(&dev->avg_rssi); |
| 984 |
spin_unlock_bh(&dev->con_mon_lock); |
| 985 |
if (avg_rssi == 0) |
| 986 |
return; |
| 987 |
|
| 988 |
avg_rssi = -avg_rssi; |
| 989 |
if (avg_rssi <= -70) |
| 990 |
val -= 0x20; |
| 991 |
else if (avg_rssi <= -60) |
| 992 |
val -= 0x10; |
| 993 |
|
| 994 |
if (val != mt7601u_bbp_rr(dev, 66)) |
| 995 |
mt7601u_bbp_wr(dev, 66, val); |
| 996 |
|
| 997 |
/* TODO: also if lost a lot of beacons try resetting |
| 998 |
* (see RTMPSetAGCInitValue() call in mlme.c). |
| 999 |
*/ |
| 1000 |
} |
| 1001 |
|
| 1002 |
static void mt7601u_phy_calibrate(struct work_struct *work) |
| 1003 |
{ |
| 1004 |
struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, |
| 1005 |
cal_work.work); |
| 1006 |
|
| 1007 |
mt7601u_agc_tune(dev); |
| 1008 |
mt7601u_tssi_cal(dev); |
| 1009 |
/* If TSSI calibration was run it already updated temperature. */ |
| 1010 |
if (!dev->ee->tssi_enabled) |
| 1011 |
dev->raw_temp = mt7601u_read_temp(dev); |
| 1012 |
mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */ |
| 1013 |
|
| 1014 |
ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, |
| 1015 |
MT_CALIBRATE_INTERVAL); |
| 1016 |
} |
| 1017 |
|
| 1018 |
static unsigned long |
| 1019 |
__mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode) |
| 1020 |
{ |
| 1021 |
u8 activate_threshold, deactivate_threshold; |
| 1022 |
|
| 1023 |
trace_freq_cal_offset(dev, phy_mode, last_offset); |
| 1024 |
|
| 1025 |
/* No beacons received - reschedule soon */ |
| 1026 |
if (last_offset == MT_FREQ_OFFSET_INVALID) |
| 1027 |
return MT_FREQ_CAL_ADJ_INTERVAL; |
| 1028 |
|
| 1029 |
switch (phy_mode) { |
| 1030 |
case MT_PHY_TYPE_CCK: |
| 1031 |
activate_threshold = 19; |
| 1032 |
deactivate_threshold = 5; |
| 1033 |
break; |
| 1034 |
case MT_PHY_TYPE_OFDM: |
| 1035 |
activate_threshold = 102; |
| 1036 |
deactivate_threshold = 32; |
| 1037 |
break; |
| 1038 |
case MT_PHY_TYPE_HT: |
| 1039 |
case MT_PHY_TYPE_HT_GF: |
| 1040 |
activate_threshold = 82; |
| 1041 |
deactivate_threshold = 20; |
| 1042 |
break; |
| 1043 |
default: |
| 1044 |
WARN_ON(1); |
| 1045 |
return MT_FREQ_CAL_CHECK_INTERVAL; |
| 1046 |
} |
| 1047 |
|
| 1048 |
if (abs(last_offset) >= activate_threshold) |
| 1049 |
dev->freq_cal.adjusting = true; |
| 1050 |
else if (abs(last_offset) <= deactivate_threshold) |
| 1051 |
dev->freq_cal.adjusting = false; |
| 1052 |
|
| 1053 |
if (!dev->freq_cal.adjusting) |
| 1054 |
return MT_FREQ_CAL_CHECK_INTERVAL; |
| 1055 |
|
| 1056 |
if (last_offset > deactivate_threshold) { |
| 1057 |
if (dev->freq_cal.freq > 0) |
| 1058 |
dev->freq_cal.freq--; |
| 1059 |
else |
| 1060 |
dev->freq_cal.adjusting = false; |
| 1061 |
} else if (last_offset < -deactivate_threshold) { |
| 1062 |
if (dev->freq_cal.freq < 0xbf) |
| 1063 |
dev->freq_cal.freq++; |
| 1064 |
else |
| 1065 |
dev->freq_cal.adjusting = false; |
| 1066 |
} |
| 1067 |
|
| 1068 |
trace_freq_cal_adjust(dev, dev->freq_cal.freq); |
| 1069 |
mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq); |
| 1070 |
mt7601u_vco_cal(dev); |
| 1071 |
|
| 1072 |
return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL : |
| 1073 |
MT_FREQ_CAL_CHECK_INTERVAL; |
| 1074 |
} |
| 1075 |
|
| 1076 |
static void mt7601u_phy_freq_cal(struct work_struct *work) |
| 1077 |
{ |
| 1078 |
struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, |
| 1079 |
freq_cal.work.work); |
| 1080 |
s8 last_offset; |
| 1081 |
u8 phy_mode; |
| 1082 |
unsigned long delay; |
| 1083 |
|
| 1084 |
spin_lock_bh(&dev->con_mon_lock); |
| 1085 |
last_offset = dev->bcn_freq_off; |
| 1086 |
phy_mode = dev->bcn_phy_mode; |
| 1087 |
spin_unlock_bh(&dev->con_mon_lock); |
| 1088 |
|
| 1089 |
delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode); |
| 1090 |
ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay); |
| 1091 |
|
| 1092 |
spin_lock_bh(&dev->con_mon_lock); |
| 1093 |
dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; |
| 1094 |
spin_unlock_bh(&dev->con_mon_lock); |
| 1095 |
} |
| 1096 |
|
| 1097 |
void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, |
| 1098 |
struct ieee80211_bss_conf *info) |
| 1099 |
{ |
| 1100 |
struct ieee80211_vif *vif = container_of(info, struct ieee80211_vif, |
| 1101 |
bss_conf); |
| 1102 |
|
| 1103 |
if (!vif->cfg.assoc) |
| 1104 |
cancel_delayed_work_sync(&dev->freq_cal.work); |
| 1105 |
|
| 1106 |
/* Start/stop collecting beacon data */ |
| 1107 |
spin_lock_bh(&dev->con_mon_lock); |
| 1108 |
ether_addr_copy(dev->ap_bssid, info->bssid); |
| 1109 |
ewma_rssi_init(&dev->avg_rssi); |
| 1110 |
dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; |
| 1111 |
spin_unlock_bh(&dev->con_mon_lock); |
| 1112 |
|
| 1113 |
dev->freq_cal.freq = dev->ee->rf_freq_off; |
| 1114 |
dev->freq_cal.enabled = vif->cfg.assoc; |
| 1115 |
dev->freq_cal.adjusting = false; |
| 1116 |
|
| 1117 |
if (vif->cfg.assoc) |
| 1118 |
ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, |
| 1119 |
MT_FREQ_CAL_INIT_DELAY); |
| 1120 |
} |
| 1121 |
|
| 1122 |
static int mt7601u_init_cal(struct mt7601u_dev *dev) |
| 1123 |
{ |
| 1124 |
u32 mac_ctrl; |
| 1125 |
int ret; |
| 1126 |
|
| 1127 |
dev->raw_temp = mt7601u_read_bootup_temp(dev); |
| 1128 |
dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) * |
| 1129 |
MT_EE_TEMPERATURE_SLOPE; |
| 1130 |
dev->dpd_temp = dev->curr_temp; |
| 1131 |
|
| 1132 |
mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); |
| 1133 |
|
| 1134 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0); |
| 1135 |
if (ret) |
| 1136 |
return ret; |
| 1137 |
|
| 1138 |
ret = mt7601u_rf_rr(dev, 0, 4); |
| 1139 |
if (ret < 0) |
| 1140 |
return ret; |
| 1141 |
ret |= 0x80; |
| 1142 |
ret = mt7601u_rf_wr(dev, 0, 4, ret); |
| 1143 |
if (ret) |
| 1144 |
return ret; |
| 1145 |
msleep(2); |
| 1146 |
|
| 1147 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0); |
| 1148 |
if (ret) |
| 1149 |
return ret; |
| 1150 |
|
| 1151 |
mt7601u_rxdc_cal(dev); |
| 1152 |
|
| 1153 |
ret = mt7601u_set_bw_filter(dev, true); |
| 1154 |
if (ret) |
| 1155 |
return ret; |
| 1156 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0); |
| 1157 |
if (ret) |
| 1158 |
return ret; |
| 1159 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0); |
| 1160 |
if (ret) |
| 1161 |
return ret; |
| 1162 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0); |
| 1163 |
if (ret) |
| 1164 |
return ret; |
| 1165 |
ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); |
| 1166 |
if (ret) |
| 1167 |
return ret; |
| 1168 |
|
| 1169 |
mt7601u_rxdc_cal(dev); |
| 1170 |
|
| 1171 |
mt7601u_tssi_dc_gain_cal(dev); |
| 1172 |
|
| 1173 |
mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); |
| 1174 |
|
| 1175 |
mt7601u_temp_comp(dev, true); |
| 1176 |
|
| 1177 |
return 0; |
| 1178 |
} |
| 1179 |
|
| 1180 |
int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw) |
| 1181 |
{ |
| 1182 |
u32 val, old; |
| 1183 |
|
| 1184 |
if (bw == dev->bw) { |
| 1185 |
/* Vendor driver does the rmc even when no change is needed. */ |
| 1186 |
mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); |
| 1187 |
|
| 1188 |
return 0; |
| 1189 |
} |
| 1190 |
dev->bw = bw; |
| 1191 |
|
| 1192 |
/* Stop MAC for the time of bw change */ |
| 1193 |
old = mt7601u_rr(dev, MT_MAC_SYS_CTRL); |
| 1194 |
val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); |
| 1195 |
mt7601u_wr(dev, MT_MAC_SYS_CTRL, val); |
| 1196 |
mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, |
| 1197 |
0, 500000); |
| 1198 |
|
| 1199 |
mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); |
| 1200 |
|
| 1201 |
mt7601u_wr(dev, MT_MAC_SYS_CTRL, old); |
| 1202 |
|
| 1203 |
return mt7601u_load_bbp_temp_table_bw(dev); |
| 1204 |
} |
| 1205 |
|
| 1206 |
/** |
| 1207 |
* mt7601u_set_rx_path - set rx path in BBP |
| 1208 |
* @dev: pointer to adapter structure |
| 1209 |
* @path: rx path to set values are 0-based |
| 1210 |
*/ |
| 1211 |
void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path) |
| 1212 |
{ |
| 1213 |
mt7601u_bbp_rmw(dev, 3, 0x18, path << 3); |
| 1214 |
} |
| 1215 |
|
| 1216 |
/** |
| 1217 |
* mt7601u_set_tx_dac - set which tx DAC to use |
| 1218 |
* @dev: pointer to adapter structure |
| 1219 |
* @dac: DAC index, values are 0-based |
| 1220 |
*/ |
| 1221 |
void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac) |
| 1222 |
{ |
| 1223 |
mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3); |
| 1224 |
} |
| 1225 |
|
| 1226 |
int mt7601u_phy_init(struct mt7601u_dev *dev) |
| 1227 |
{ |
| 1228 |
int ret; |
| 1229 |
|
| 1230 |
dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0); |
| 1231 |
dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1); |
| 1232 |
|
| 1233 |
ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off); |
| 1234 |
if (ret) |
| 1235 |
return ret; |
| 1236 |
ret = mt7601u_write_reg_pairs(dev, 0, rf_central, |
| 1237 |
ARRAY_SIZE(rf_central)); |
| 1238 |
if (ret) |
| 1239 |
return ret; |
| 1240 |
ret = mt7601u_write_reg_pairs(dev, 0, rf_channel, |
| 1241 |
ARRAY_SIZE(rf_channel)); |
| 1242 |
if (ret) |
| 1243 |
return ret; |
| 1244 |
ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga)); |
| 1245 |
if (ret) |
| 1246 |
return ret; |
| 1247 |
|
| 1248 |
ret = mt7601u_init_cal(dev); |
| 1249 |
if (ret) |
| 1250 |
return ret; |
| 1251 |
|
| 1252 |
dev->prev_pwr_diff = 100; |
| 1253 |
|
| 1254 |
INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate); |
| 1255 |
INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal); |
| 1256 |
|
| 1257 |
return 0; |
| 1258 |
} |