| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Implement cfg80211 ("iw") support. |
| 4 |
* |
| 5 |
* Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany |
| 6 |
* Holger Schurig <[email protected]> |
| 7 |
* |
| 8 |
*/ |
| 9 |
|
| 10 |
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 11 |
|
| 12 |
#include <linux/hardirq.h> |
| 13 |
#include <linux/sched.h> |
| 14 |
#include <linux/wait.h> |
| 15 |
#include <linux/slab.h> |
| 16 |
#include <linux/ieee80211.h> |
| 17 |
#include <net/cfg80211.h> |
| 18 |
#include <linux/unaligned.h> |
| 19 |
|
| 20 |
#include "decl.h" |
| 21 |
#include "cfg.h" |
| 22 |
#include "cmd.h" |
| 23 |
#include "mesh.h" |
| 24 |
|
| 25 |
|
| 26 |
#define CHAN2G(_channel, _freq, _flags) { \ |
| 27 |
.band = NL80211_BAND_2GHZ, \ |
| 28 |
.center_freq = (_freq), \ |
| 29 |
.hw_value = (_channel), \ |
| 30 |
.flags = (_flags), \ |
| 31 |
.max_antenna_gain = 0, \ |
| 32 |
.max_power = 30, \ |
| 33 |
} |
| 34 |
|
| 35 |
static struct ieee80211_channel lbs_2ghz_channels[] = { |
| 36 |
CHAN2G(1, 2412, 0), |
| 37 |
CHAN2G(2, 2417, 0), |
| 38 |
CHAN2G(3, 2422, 0), |
| 39 |
CHAN2G(4, 2427, 0), |
| 40 |
CHAN2G(5, 2432, 0), |
| 41 |
CHAN2G(6, 2437, 0), |
| 42 |
CHAN2G(7, 2442, 0), |
| 43 |
CHAN2G(8, 2447, 0), |
| 44 |
CHAN2G(9, 2452, 0), |
| 45 |
CHAN2G(10, 2457, 0), |
| 46 |
CHAN2G(11, 2462, 0), |
| 47 |
CHAN2G(12, 2467, 0), |
| 48 |
CHAN2G(13, 2472, 0), |
| 49 |
CHAN2G(14, 2484, 0), |
| 50 |
}; |
| 51 |
|
| 52 |
#define RATETAB_ENT(_rate, _hw_value, _flags) { \ |
| 53 |
.bitrate = (_rate), \ |
| 54 |
.hw_value = (_hw_value), \ |
| 55 |
.flags = (_flags), \ |
| 56 |
} |
| 57 |
|
| 58 |
|
| 59 |
/* Table 6 in section 3.2.1.1 */ |
| 60 |
static struct ieee80211_rate lbs_rates[] = { |
| 61 |
RATETAB_ENT(10, 0, 0), |
| 62 |
RATETAB_ENT(20, 1, 0), |
| 63 |
RATETAB_ENT(55, 2, 0), |
| 64 |
RATETAB_ENT(110, 3, 0), |
| 65 |
RATETAB_ENT(60, 9, 0), |
| 66 |
RATETAB_ENT(90, 6, 0), |
| 67 |
RATETAB_ENT(120, 7, 0), |
| 68 |
RATETAB_ENT(180, 8, 0), |
| 69 |
RATETAB_ENT(240, 9, 0), |
| 70 |
RATETAB_ENT(360, 10, 0), |
| 71 |
RATETAB_ENT(480, 11, 0), |
| 72 |
RATETAB_ENT(540, 12, 0), |
| 73 |
}; |
| 74 |
|
| 75 |
static struct ieee80211_supported_band lbs_band_2ghz = { |
| 76 |
.channels = lbs_2ghz_channels, |
| 77 |
.n_channels = ARRAY_SIZE(lbs_2ghz_channels), |
| 78 |
.bitrates = lbs_rates, |
| 79 |
.n_bitrates = ARRAY_SIZE(lbs_rates), |
| 80 |
}; |
| 81 |
|
| 82 |
|
| 83 |
static const u32 cipher_suites[] = { |
| 84 |
WLAN_CIPHER_SUITE_WEP40, |
| 85 |
WLAN_CIPHER_SUITE_WEP104, |
| 86 |
WLAN_CIPHER_SUITE_TKIP, |
| 87 |
WLAN_CIPHER_SUITE_CCMP, |
| 88 |
}; |
| 89 |
|
| 90 |
/* Time to stay on the channel */ |
| 91 |
#define LBS_DWELL_PASSIVE 100 |
| 92 |
#define LBS_DWELL_ACTIVE 40 |
| 93 |
|
| 94 |
|
| 95 |
/*************************************************************************** |
| 96 |
* Misc utility functions |
| 97 |
* |
| 98 |
* TLVs are Marvell specific. They are very similar to IEs, they have the |
| 99 |
* same structure: type, length, data*. The only difference: for IEs, the |
| 100 |
* type and length are u8, but for TLVs they're __le16. |
| 101 |
*/ |
| 102 |
|
| 103 |
/* |
| 104 |
* Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 |
| 105 |
* in the firmware spec |
| 106 |
*/ |
| 107 |
static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type) |
| 108 |
{ |
| 109 |
int ret = -ENOTSUPP; |
| 110 |
|
| 111 |
switch (auth_type) { |
| 112 |
case NL80211_AUTHTYPE_OPEN_SYSTEM: |
| 113 |
case NL80211_AUTHTYPE_SHARED_KEY: |
| 114 |
ret = auth_type; |
| 115 |
break; |
| 116 |
case NL80211_AUTHTYPE_AUTOMATIC: |
| 117 |
ret = NL80211_AUTHTYPE_OPEN_SYSTEM; |
| 118 |
break; |
| 119 |
case NL80211_AUTHTYPE_NETWORK_EAP: |
| 120 |
ret = 0x80; |
| 121 |
break; |
| 122 |
default: |
| 123 |
/* silence compiler */ |
| 124 |
break; |
| 125 |
} |
| 126 |
return ret; |
| 127 |
} |
| 128 |
|
| 129 |
|
| 130 |
/* |
| 131 |
* Various firmware commands need the list of supported rates, but with |
| 132 |
* the hight-bit set for basic rates |
| 133 |
*/ |
| 134 |
static int lbs_add_rates(u8 *rates) |
| 135 |
{ |
| 136 |
size_t i; |
| 137 |
|
| 138 |
for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { |
| 139 |
u8 rate = lbs_rates[i].bitrate / 5; |
| 140 |
if (rate == 0x02 || rate == 0x04 || |
| 141 |
rate == 0x0b || rate == 0x16) |
| 142 |
rate |= 0x80; |
| 143 |
rates[i] = rate; |
| 144 |
} |
| 145 |
return ARRAY_SIZE(lbs_rates); |
| 146 |
} |
| 147 |
|
| 148 |
|
| 149 |
/*************************************************************************** |
| 150 |
* TLV utility functions |
| 151 |
* |
| 152 |
* TLVs are Marvell specific. They are very similar to IEs, they have the |
| 153 |
* same structure: type, length, data*. The only difference: for IEs, the |
| 154 |
* type and length are u8, but for TLVs they're __le16. |
| 155 |
*/ |
| 156 |
|
| 157 |
|
| 158 |
/* |
| 159 |
* Add ssid TLV |
| 160 |
*/ |
| 161 |
#define LBS_MAX_SSID_TLV_SIZE \ |
| 162 |
(sizeof(struct mrvl_ie_header) \ |
| 163 |
+ IEEE80211_MAX_SSID_LEN) |
| 164 |
|
| 165 |
static int lbs_add_ssid_tlv(u8 *tlv, const u8 *ssid, int ssid_len) |
| 166 |
{ |
| 167 |
struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv; |
| 168 |
|
| 169 |
/* |
| 170 |
* TLV-ID SSID 00 00 |
| 171 |
* length 06 00 |
| 172 |
* ssid 4d 4e 54 45 53 54 |
| 173 |
*/ |
| 174 |
ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); |
| 175 |
ssid_tlv->header.len = cpu_to_le16(ssid_len); |
| 176 |
memcpy(ssid_tlv->ssid, ssid, ssid_len); |
| 177 |
return sizeof(ssid_tlv->header) + ssid_len; |
| 178 |
} |
| 179 |
|
| 180 |
|
| 181 |
/* |
| 182 |
* Add channel list TLV (section 8.4.2) |
| 183 |
* |
| 184 |
* Actual channel data comes from priv->wdev->wiphy->channels. |
| 185 |
*/ |
| 186 |
#define LBS_MAX_CHANNEL_LIST_TLV_SIZE \ |
| 187 |
(sizeof(struct mrvl_ie_header) \ |
| 188 |
+ (LBS_SCAN_BEFORE_NAP * sizeof(struct chanscanparamset))) |
| 189 |
|
| 190 |
static int lbs_add_channel_list_tlv(struct lbs_private *priv, u8 *tlv, |
| 191 |
int last_channel, int active_scan) |
| 192 |
{ |
| 193 |
int chanscanparamsize = sizeof(struct chanscanparamset) * |
| 194 |
(last_channel - priv->scan_channel); |
| 195 |
|
| 196 |
struct mrvl_ie_header *header = (void *) tlv; |
| 197 |
|
| 198 |
/* |
| 199 |
* TLV-ID CHANLIST 01 01 |
| 200 |
* length 0e 00 |
| 201 |
* channel 00 01 00 00 00 64 00 |
| 202 |
* radio type 00 |
| 203 |
* channel 01 |
| 204 |
* scan type 00 |
| 205 |
* min scan time 00 00 |
| 206 |
* max scan time 64 00 |
| 207 |
* channel 2 00 02 00 00 00 64 00 |
| 208 |
* |
| 209 |
*/ |
| 210 |
|
| 211 |
header->type = cpu_to_le16(TLV_TYPE_CHANLIST); |
| 212 |
header->len = cpu_to_le16(chanscanparamsize); |
| 213 |
tlv += sizeof(struct mrvl_ie_header); |
| 214 |
|
| 215 |
/* lbs_deb_scan("scan: channels %d to %d\n", priv->scan_channel, |
| 216 |
last_channel); */ |
| 217 |
memset(tlv, 0, chanscanparamsize); |
| 218 |
|
| 219 |
while (priv->scan_channel < last_channel) { |
| 220 |
struct chanscanparamset *param = (void *) tlv; |
| 221 |
|
| 222 |
param->radiotype = CMD_SCAN_RADIO_TYPE_BG; |
| 223 |
param->channumber = |
| 224 |
priv->scan_req->channels[priv->scan_channel]->hw_value; |
| 225 |
if (active_scan) { |
| 226 |
param->maxscantime = cpu_to_le16(LBS_DWELL_ACTIVE); |
| 227 |
} else { |
| 228 |
param->chanscanmode.passivescan = 1; |
| 229 |
param->maxscantime = cpu_to_le16(LBS_DWELL_PASSIVE); |
| 230 |
} |
| 231 |
tlv += sizeof(struct chanscanparamset); |
| 232 |
priv->scan_channel++; |
| 233 |
} |
| 234 |
return sizeof(struct mrvl_ie_header) + chanscanparamsize; |
| 235 |
} |
| 236 |
|
| 237 |
|
| 238 |
/* |
| 239 |
* Add rates TLV |
| 240 |
* |
| 241 |
* The rates are in lbs_bg_rates[], but for the 802.11b |
| 242 |
* rates the high bit is set. We add this TLV only because |
| 243 |
* there's a firmware which otherwise doesn't report all |
| 244 |
* APs in range. |
| 245 |
*/ |
| 246 |
#define LBS_MAX_RATES_TLV_SIZE \ |
| 247 |
(sizeof(struct mrvl_ie_header) \ |
| 248 |
+ (ARRAY_SIZE(lbs_rates))) |
| 249 |
|
| 250 |
/* Adds a TLV with all rates the hardware supports */ |
| 251 |
static int lbs_add_supported_rates_tlv(u8 *tlv) |
| 252 |
{ |
| 253 |
size_t i; |
| 254 |
struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; |
| 255 |
|
| 256 |
/* |
| 257 |
* TLV-ID RATES 01 00 |
| 258 |
* length 0e 00 |
| 259 |
* rates 82 84 8b 96 0c 12 18 24 30 48 60 6c |
| 260 |
*/ |
| 261 |
rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); |
| 262 |
tlv += sizeof(rate_tlv->header); |
| 263 |
i = lbs_add_rates(tlv); |
| 264 |
tlv += i; |
| 265 |
rate_tlv->header.len = cpu_to_le16(i); |
| 266 |
return sizeof(rate_tlv->header) + i; |
| 267 |
} |
| 268 |
|
| 269 |
/* Add common rates from a TLV and return the new end of the TLV */ |
| 270 |
static u8 * |
| 271 |
add_ie_rates(u8 *tlv, const u8 *ie, int *nrates) |
| 272 |
{ |
| 273 |
int hw, ap, ap_max = ie[1]; |
| 274 |
u8 hw_rate; |
| 275 |
|
| 276 |
if (ap_max > MAX_RATES) { |
| 277 |
lbs_deb_assoc("invalid rates\n"); |
| 278 |
return tlv; |
| 279 |
} |
| 280 |
/* Advance past IE header */ |
| 281 |
ie += 2; |
| 282 |
|
| 283 |
lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max); |
| 284 |
|
| 285 |
for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { |
| 286 |
hw_rate = lbs_rates[hw].bitrate / 5; |
| 287 |
for (ap = 0; ap < ap_max; ap++) { |
| 288 |
if (hw_rate == (ie[ap] & 0x7f)) { |
| 289 |
*tlv++ = ie[ap]; |
| 290 |
*nrates = *nrates + 1; |
| 291 |
} |
| 292 |
} |
| 293 |
} |
| 294 |
return tlv; |
| 295 |
} |
| 296 |
|
| 297 |
/* |
| 298 |
* Adds a TLV with all rates the hardware *and* BSS supports. |
| 299 |
*/ |
| 300 |
static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss) |
| 301 |
{ |
| 302 |
struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv; |
| 303 |
const u8 *rates_eid, *ext_rates_eid; |
| 304 |
int n = 0; |
| 305 |
|
| 306 |
rcu_read_lock(); |
| 307 |
rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); |
| 308 |
ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES); |
| 309 |
|
| 310 |
/* |
| 311 |
* 01 00 TLV_TYPE_RATES |
| 312 |
* 04 00 len |
| 313 |
* 82 84 8b 96 rates |
| 314 |
*/ |
| 315 |
rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); |
| 316 |
tlv += sizeof(rate_tlv->header); |
| 317 |
|
| 318 |
/* Add basic rates */ |
| 319 |
if (rates_eid) { |
| 320 |
tlv = add_ie_rates(tlv, rates_eid, &n); |
| 321 |
|
| 322 |
/* Add extended rates, if any */ |
| 323 |
if (ext_rates_eid) |
| 324 |
tlv = add_ie_rates(tlv, ext_rates_eid, &n); |
| 325 |
} else { |
| 326 |
lbs_deb_assoc("assoc: bss had no basic rate IE\n"); |
| 327 |
/* Fallback: add basic 802.11b rates */ |
| 328 |
*tlv++ = 0x82; |
| 329 |
*tlv++ = 0x84; |
| 330 |
*tlv++ = 0x8b; |
| 331 |
*tlv++ = 0x96; |
| 332 |
n = 4; |
| 333 |
} |
| 334 |
rcu_read_unlock(); |
| 335 |
|
| 336 |
rate_tlv->header.len = cpu_to_le16(n); |
| 337 |
return sizeof(rate_tlv->header) + n; |
| 338 |
} |
| 339 |
|
| 340 |
|
| 341 |
/* |
| 342 |
* Add auth type TLV. |
| 343 |
* |
| 344 |
* This is only needed for newer firmware (V9 and up). |
| 345 |
*/ |
| 346 |
#define LBS_MAX_AUTH_TYPE_TLV_SIZE \ |
| 347 |
sizeof(struct mrvl_ie_auth_type) |
| 348 |
|
| 349 |
static int lbs_add_auth_type_tlv(u8 *tlv, enum nl80211_auth_type auth_type) |
| 350 |
{ |
| 351 |
struct mrvl_ie_auth_type *auth = (void *) tlv; |
| 352 |
|
| 353 |
/* |
| 354 |
* 1f 01 TLV_TYPE_AUTH_TYPE |
| 355 |
* 01 00 len |
| 356 |
* 01 auth type |
| 357 |
*/ |
| 358 |
auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); |
| 359 |
auth->header.len = cpu_to_le16(sizeof(*auth)-sizeof(auth->header)); |
| 360 |
auth->auth = cpu_to_le16(lbs_auth_to_authtype(auth_type)); |
| 361 |
return sizeof(*auth); |
| 362 |
} |
| 363 |
|
| 364 |
|
| 365 |
/* |
| 366 |
* Add channel (phy ds) TLV |
| 367 |
*/ |
| 368 |
#define LBS_MAX_CHANNEL_TLV_SIZE \ |
| 369 |
sizeof(struct mrvl_ie_header) |
| 370 |
|
| 371 |
static int lbs_add_channel_tlv(u8 *tlv, u8 channel) |
| 372 |
{ |
| 373 |
struct mrvl_ie_ds_param_set *ds = (void *) tlv; |
| 374 |
|
| 375 |
/* |
| 376 |
* 03 00 TLV_TYPE_PHY_DS |
| 377 |
* 01 00 len |
| 378 |
* 06 channel |
| 379 |
*/ |
| 380 |
ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); |
| 381 |
ds->header.len = cpu_to_le16(sizeof(*ds)-sizeof(ds->header)); |
| 382 |
ds->channel = channel; |
| 383 |
return sizeof(*ds); |
| 384 |
} |
| 385 |
|
| 386 |
|
| 387 |
/* |
| 388 |
* Add (empty) CF param TLV of the form: |
| 389 |
*/ |
| 390 |
#define LBS_MAX_CF_PARAM_TLV_SIZE \ |
| 391 |
sizeof(struct mrvl_ie_header) |
| 392 |
|
| 393 |
static int lbs_add_cf_param_tlv(u8 *tlv) |
| 394 |
{ |
| 395 |
struct mrvl_ie_cf_param_set *cf = (void *)tlv; |
| 396 |
|
| 397 |
/* |
| 398 |
* 04 00 TLV_TYPE_CF |
| 399 |
* 06 00 len |
| 400 |
* 00 cfpcnt |
| 401 |
* 00 cfpperiod |
| 402 |
* 00 00 cfpmaxduration |
| 403 |
* 00 00 cfpdurationremaining |
| 404 |
*/ |
| 405 |
cf->header.type = cpu_to_le16(TLV_TYPE_CF); |
| 406 |
cf->header.len = cpu_to_le16(sizeof(*cf)-sizeof(cf->header)); |
| 407 |
return sizeof(*cf); |
| 408 |
} |
| 409 |
|
| 410 |
/* |
| 411 |
* Add WPA TLV |
| 412 |
*/ |
| 413 |
#define LBS_MAX_WPA_TLV_SIZE \ |
| 414 |
(sizeof(struct mrvl_ie_header) \ |
| 415 |
+ 128 /* TODO: I guessed the size */) |
| 416 |
|
| 417 |
static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) |
| 418 |
{ |
| 419 |
struct mrvl_ie_data *wpatlv = (struct mrvl_ie_data *)tlv; |
| 420 |
const struct element *wpaie; |
| 421 |
|
| 422 |
/* Find the first RSN or WPA IE to use */ |
| 423 |
wpaie = cfg80211_find_elem(WLAN_EID_RSN, ie, ie_len); |
| 424 |
if (!wpaie) |
| 425 |
wpaie = cfg80211_find_vendor_elem(WLAN_OUI_MICROSOFT, |
| 426 |
WLAN_OUI_TYPE_MICROSOFT_WPA, |
| 427 |
ie, ie_len); |
| 428 |
if (!wpaie || wpaie->datalen > 128) |
| 429 |
return 0; |
| 430 |
|
| 431 |
/* |
| 432 |
* Convert the found IE to a TLV. IEs use u8 for the header, |
| 433 |
* u8 type |
| 434 |
* u8 len |
| 435 |
* u8[] data |
| 436 |
* but TLVs use __le16 instead: |
| 437 |
* __le16 type |
| 438 |
* __le16 len |
| 439 |
* u8[] data |
| 440 |
*/ |
| 441 |
wpatlv->header.type = cpu_to_le16(wpaie->id); |
| 442 |
wpatlv->header.len = cpu_to_le16(wpaie->datalen); |
| 443 |
memcpy(wpatlv->data, wpaie->data, wpaie->datalen); |
| 444 |
|
| 445 |
/* Return the total number of bytes added to the TLV buffer */ |
| 446 |
return sizeof(struct mrvl_ie_header) + wpaie->datalen; |
| 447 |
} |
| 448 |
|
| 449 |
/* Add WPS enrollee TLV |
| 450 |
*/ |
| 451 |
#define LBS_MAX_WPS_ENROLLEE_TLV_SIZE \ |
| 452 |
(sizeof(struct mrvl_ie_header) \ |
| 453 |
+ 256) |
| 454 |
|
| 455 |
static int lbs_add_wps_enrollee_tlv(u8 *tlv, const u8 *ie, size_t ie_len) |
| 456 |
{ |
| 457 |
struct mrvl_ie_data *wpstlv = (struct mrvl_ie_data *)tlv; |
| 458 |
const struct element *wpsie; |
| 459 |
|
| 460 |
/* Look for a WPS IE and add it to the probe request */ |
| 461 |
wpsie = cfg80211_find_vendor_elem(WLAN_OUI_MICROSOFT, |
| 462 |
WLAN_OUI_TYPE_MICROSOFT_WPS, |
| 463 |
ie, ie_len); |
| 464 |
if (!wpsie) |
| 465 |
return 0; |
| 466 |
|
| 467 |
/* Convert the WPS IE to a TLV. The IE looks like this: |
| 468 |
* u8 type (WLAN_EID_VENDOR_SPECIFIC) |
| 469 |
* u8 len |
| 470 |
* u8[] data |
| 471 |
* but the TLV will look like this instead: |
| 472 |
* __le16 type (TLV_TYPE_WPS_ENROLLEE) |
| 473 |
* __le16 len |
| 474 |
* u8[] data |
| 475 |
*/ |
| 476 |
wpstlv->header.type = cpu_to_le16(TLV_TYPE_WPS_ENROLLEE); |
| 477 |
wpstlv->header.len = cpu_to_le16(wpsie->datalen); |
| 478 |
memcpy(wpstlv->data, wpsie->data, wpsie->datalen); |
| 479 |
|
| 480 |
/* Return the total number of bytes added to the TLV buffer */ |
| 481 |
return sizeof(struct mrvl_ie_header) + wpsie->datalen; |
| 482 |
} |
| 483 |
|
| 484 |
/* |
| 485 |
* Set Channel |
| 486 |
*/ |
| 487 |
|
| 488 |
static int lbs_cfg_set_monitor_channel(struct wiphy *wiphy, |
| 489 |
struct net_device *dev, |
| 490 |
struct cfg80211_chan_def *chandef) |
| 491 |
{ |
| 492 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 493 |
int ret = -ENOTSUPP; |
| 494 |
|
| 495 |
if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) |
| 496 |
goto out; |
| 497 |
|
| 498 |
ret = lbs_set_channel(priv, chandef->chan->hw_value); |
| 499 |
|
| 500 |
out: |
| 501 |
return ret; |
| 502 |
} |
| 503 |
|
| 504 |
static int lbs_cfg_set_mesh_channel(struct wiphy *wiphy, |
| 505 |
struct net_device *netdev, |
| 506 |
struct ieee80211_channel *channel) |
| 507 |
{ |
| 508 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 509 |
int ret = -ENOTSUPP; |
| 510 |
|
| 511 |
if (netdev != priv->mesh_dev) |
| 512 |
goto out; |
| 513 |
|
| 514 |
ret = lbs_mesh_set_channel(priv, channel->hw_value); |
| 515 |
|
| 516 |
out: |
| 517 |
return ret; |
| 518 |
} |
| 519 |
|
| 520 |
|
| 521 |
|
| 522 |
/* |
| 523 |
* Scanning |
| 524 |
*/ |
| 525 |
|
| 526 |
/* |
| 527 |
* When scanning, the firmware doesn't send a nul packet with the power-safe |
| 528 |
* bit to the AP. So we cannot stay away from our current channel too long, |
| 529 |
* otherwise we loose data. So take a "nap" while scanning every other |
| 530 |
* while. |
| 531 |
*/ |
| 532 |
#define LBS_SCAN_BEFORE_NAP 4 |
| 533 |
|
| 534 |
|
| 535 |
/* |
| 536 |
* When the firmware reports back a scan-result, it gives us an "u8 rssi", |
| 537 |
* which isn't really an RSSI, as it becomes larger when moving away from |
| 538 |
* the AP. Anyway, we need to convert that into mBm. |
| 539 |
*/ |
| 540 |
#define LBS_SCAN_RSSI_TO_MBM(rssi) \ |
| 541 |
((-(int)rssi + 3)*100) |
| 542 |
|
| 543 |
static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, |
| 544 |
struct cmd_header *resp) |
| 545 |
{ |
| 546 |
struct cfg80211_bss *bss; |
| 547 |
struct cmd_ds_802_11_scan_rsp *scanresp = (void *)resp; |
| 548 |
int bsssize; |
| 549 |
const u8 *pos; |
| 550 |
const u8 *tsfdesc; |
| 551 |
int tsfsize; |
| 552 |
int i; |
| 553 |
int ret = -EILSEQ; |
| 554 |
|
| 555 |
bsssize = get_unaligned_le16(&scanresp->bssdescriptsize); |
| 556 |
|
| 557 |
lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n", |
| 558 |
scanresp->nr_sets, bsssize, le16_to_cpu(resp->size)); |
| 559 |
|
| 560 |
if (scanresp->nr_sets == 0) { |
| 561 |
ret = 0; |
| 562 |
goto done; |
| 563 |
} |
| 564 |
|
| 565 |
/* |
| 566 |
* The general layout of the scan response is described in chapter |
| 567 |
* 5.7.1. Basically we have a common part, then any number of BSS |
| 568 |
* descriptor sections. Finally we have section with the same number |
| 569 |
* of TSFs. |
| 570 |
* |
| 571 |
* cmd_ds_802_11_scan_rsp |
| 572 |
* cmd_header |
| 573 |
* pos_size |
| 574 |
* nr_sets |
| 575 |
* bssdesc 1 |
| 576 |
* bssid |
| 577 |
* rssi |
| 578 |
* timestamp |
| 579 |
* intvl |
| 580 |
* capa |
| 581 |
* IEs |
| 582 |
* bssdesc 2 |
| 583 |
* bssdesc n |
| 584 |
* MrvlIEtypes_TsfFimestamp_t |
| 585 |
* TSF for BSS 1 |
| 586 |
* TSF for BSS 2 |
| 587 |
* TSF for BSS n |
| 588 |
*/ |
| 589 |
|
| 590 |
pos = scanresp->bssdesc_and_tlvbuffer; |
| 591 |
|
| 592 |
lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer, |
| 593 |
bsssize); |
| 594 |
|
| 595 |
tsfdesc = pos + bsssize; |
| 596 |
tsfsize = 4 + 8 * scanresp->nr_sets; |
| 597 |
lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize); |
| 598 |
|
| 599 |
/* Validity check: we expect a Marvell-Local TLV */ |
| 600 |
i = get_unaligned_le16(tsfdesc); |
| 601 |
tsfdesc += 2; |
| 602 |
if (i != TLV_TYPE_TSFTIMESTAMP) { |
| 603 |
lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i); |
| 604 |
goto done; |
| 605 |
} |
| 606 |
|
| 607 |
/* |
| 608 |
* Validity check: the TLV holds TSF values with 8 bytes each, so |
| 609 |
* the size in the TLV must match the nr_sets value |
| 610 |
*/ |
| 611 |
i = get_unaligned_le16(tsfdesc); |
| 612 |
tsfdesc += 2; |
| 613 |
if (i / 8 != scanresp->nr_sets) { |
| 614 |
lbs_deb_scan("scan response: invalid number of TSF timestamp " |
| 615 |
"sets (expected %d got %d)\n", scanresp->nr_sets, |
| 616 |
i / 8); |
| 617 |
goto done; |
| 618 |
} |
| 619 |
|
| 620 |
for (i = 0; i < scanresp->nr_sets; i++) { |
| 621 |
const u8 *bssid; |
| 622 |
const u8 *ie; |
| 623 |
int left; |
| 624 |
int ielen; |
| 625 |
int rssi; |
| 626 |
u16 intvl; |
| 627 |
u16 capa; |
| 628 |
int chan_no = -1; |
| 629 |
const u8 *ssid = NULL; |
| 630 |
u8 ssid_len = 0; |
| 631 |
|
| 632 |
int len = get_unaligned_le16(pos); |
| 633 |
pos += 2; |
| 634 |
|
| 635 |
/* BSSID */ |
| 636 |
bssid = pos; |
| 637 |
pos += ETH_ALEN; |
| 638 |
/* RSSI */ |
| 639 |
rssi = *pos++; |
| 640 |
/* Packet time stamp */ |
| 641 |
pos += 8; |
| 642 |
/* Beacon interval */ |
| 643 |
intvl = get_unaligned_le16(pos); |
| 644 |
pos += 2; |
| 645 |
/* Capabilities */ |
| 646 |
capa = get_unaligned_le16(pos); |
| 647 |
pos += 2; |
| 648 |
|
| 649 |
/* To find out the channel, we must parse the IEs */ |
| 650 |
ie = pos; |
| 651 |
/* |
| 652 |
* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon |
| 653 |
* interval, capabilities |
| 654 |
*/ |
| 655 |
ielen = left = len - (6 + 1 + 8 + 2 + 2); |
| 656 |
while (left >= 2) { |
| 657 |
u8 id, elen; |
| 658 |
id = *pos++; |
| 659 |
elen = *pos++; |
| 660 |
left -= 2; |
| 661 |
if (elen > left) { |
| 662 |
lbs_deb_scan("scan response: invalid IE fmt\n"); |
| 663 |
goto done; |
| 664 |
} |
| 665 |
|
| 666 |
if (id == WLAN_EID_DS_PARAMS) |
| 667 |
chan_no = *pos; |
| 668 |
if (id == WLAN_EID_SSID) { |
| 669 |
ssid = pos; |
| 670 |
ssid_len = elen; |
| 671 |
} |
| 672 |
left -= elen; |
| 673 |
pos += elen; |
| 674 |
} |
| 675 |
|
| 676 |
/* No channel, no luck */ |
| 677 |
if (chan_no != -1) { |
| 678 |
struct wiphy *wiphy = priv->wdev->wiphy; |
| 679 |
int freq = ieee80211_channel_to_frequency(chan_no, |
| 680 |
NL80211_BAND_2GHZ); |
| 681 |
struct ieee80211_channel *channel = |
| 682 |
ieee80211_get_channel(wiphy, freq); |
| 683 |
|
| 684 |
lbs_deb_scan("scan: %pM, capa %04x, chan %2d, %*pE, %d dBm\n", |
| 685 |
bssid, capa, chan_no, ssid_len, ssid, |
| 686 |
LBS_SCAN_RSSI_TO_MBM(rssi)/100); |
| 687 |
|
| 688 |
if (channel && |
| 689 |
!(channel->flags & IEEE80211_CHAN_DISABLED)) { |
| 690 |
bss = cfg80211_inform_bss(wiphy, channel, |
| 691 |
CFG80211_BSS_FTYPE_UNKNOWN, |
| 692 |
bssid, get_unaligned_le64(tsfdesc), |
| 693 |
capa, intvl, ie, ielen, |
| 694 |
LBS_SCAN_RSSI_TO_MBM(rssi), |
| 695 |
GFP_KERNEL); |
| 696 |
cfg80211_put_bss(wiphy, bss); |
| 697 |
} |
| 698 |
} else |
| 699 |
lbs_deb_scan("scan response: missing BSS channel IE\n"); |
| 700 |
|
| 701 |
tsfdesc += 8; |
| 702 |
} |
| 703 |
ret = 0; |
| 704 |
|
| 705 |
done: |
| 706 |
return ret; |
| 707 |
} |
| 708 |
|
| 709 |
|
| 710 |
/* |
| 711 |
* Our scan command contains a TLV, consisting of a SSID TLV, a channel list |
| 712 |
* TLV, a rates TLV, and an optional WPS IE. Determine the maximum size of them: |
| 713 |
*/ |
| 714 |
#define LBS_SCAN_MAX_CMD_SIZE \ |
| 715 |
(sizeof(struct cmd_ds_802_11_scan) \ |
| 716 |
+ LBS_MAX_SSID_TLV_SIZE \ |
| 717 |
+ LBS_MAX_CHANNEL_LIST_TLV_SIZE \ |
| 718 |
+ LBS_MAX_RATES_TLV_SIZE \ |
| 719 |
+ LBS_MAX_WPS_ENROLLEE_TLV_SIZE) |
| 720 |
|
| 721 |
/* |
| 722 |
* Assumes priv->scan_req is initialized and valid |
| 723 |
* Assumes priv->scan_channel is initialized |
| 724 |
*/ |
| 725 |
static void lbs_scan_worker(struct work_struct *work) |
| 726 |
{ |
| 727 |
struct lbs_private *priv = |
| 728 |
container_of(work, struct lbs_private, scan_work.work); |
| 729 |
struct cmd_ds_802_11_scan *scan_cmd; |
| 730 |
u8 *tlv; /* pointer into our current, growing TLV storage area */ |
| 731 |
int last_channel; |
| 732 |
int running, carrier; |
| 733 |
|
| 734 |
scan_cmd = kzalloc(LBS_SCAN_MAX_CMD_SIZE, GFP_KERNEL); |
| 735 |
if (scan_cmd == NULL) |
| 736 |
return; |
| 737 |
|
| 738 |
/* prepare fixed part of scan command */ |
| 739 |
scan_cmd->bsstype = CMD_BSS_TYPE_ANY; |
| 740 |
|
| 741 |
/* stop network while we're away from our main channel */ |
| 742 |
running = !netif_queue_stopped(priv->dev); |
| 743 |
carrier = netif_carrier_ok(priv->dev); |
| 744 |
if (running) |
| 745 |
netif_stop_queue(priv->dev); |
| 746 |
if (carrier) |
| 747 |
netif_carrier_off(priv->dev); |
| 748 |
|
| 749 |
/* prepare fixed part of scan command */ |
| 750 |
tlv = scan_cmd->tlvbuffer; |
| 751 |
|
| 752 |
/* add SSID TLV */ |
| 753 |
if (priv->scan_req->n_ssids && priv->scan_req->ssids[0].ssid_len > 0) |
| 754 |
tlv += lbs_add_ssid_tlv(tlv, |
| 755 |
priv->scan_req->ssids[0].ssid, |
| 756 |
priv->scan_req->ssids[0].ssid_len); |
| 757 |
|
| 758 |
/* add channel TLVs */ |
| 759 |
last_channel = priv->scan_channel + LBS_SCAN_BEFORE_NAP; |
| 760 |
if (last_channel > priv->scan_req->n_channels) |
| 761 |
last_channel = priv->scan_req->n_channels; |
| 762 |
tlv += lbs_add_channel_list_tlv(priv, tlv, last_channel, |
| 763 |
priv->scan_req->n_ssids); |
| 764 |
|
| 765 |
/* add rates TLV */ |
| 766 |
tlv += lbs_add_supported_rates_tlv(tlv); |
| 767 |
|
| 768 |
/* add optional WPS enrollee TLV */ |
| 769 |
if (priv->scan_req->ie && priv->scan_req->ie_len) |
| 770 |
tlv += lbs_add_wps_enrollee_tlv(tlv, priv->scan_req->ie, |
| 771 |
priv->scan_req->ie_len); |
| 772 |
|
| 773 |
if (priv->scan_channel < priv->scan_req->n_channels) { |
| 774 |
cancel_delayed_work(&priv->scan_work); |
| 775 |
if (netif_running(priv->dev)) |
| 776 |
queue_delayed_work(priv->work_thread, &priv->scan_work, |
| 777 |
msecs_to_jiffies(300)); |
| 778 |
} |
| 779 |
|
| 780 |
/* This is the final data we are about to send */ |
| 781 |
scan_cmd->hdr.size = cpu_to_le16(tlv - (u8 *)scan_cmd); |
| 782 |
lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd, |
| 783 |
sizeof(*scan_cmd)); |
| 784 |
lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer, |
| 785 |
tlv - scan_cmd->tlvbuffer); |
| 786 |
|
| 787 |
__lbs_cmd(priv, CMD_802_11_SCAN, &scan_cmd->hdr, |
| 788 |
le16_to_cpu(scan_cmd->hdr.size), |
| 789 |
lbs_ret_scan, 0); |
| 790 |
|
| 791 |
if (priv->scan_channel >= priv->scan_req->n_channels) { |
| 792 |
/* Mark scan done */ |
| 793 |
cancel_delayed_work(&priv->scan_work); |
| 794 |
lbs_scan_done(priv); |
| 795 |
} |
| 796 |
|
| 797 |
/* Restart network */ |
| 798 |
if (carrier) |
| 799 |
netif_carrier_on(priv->dev); |
| 800 |
if (running && !priv->tx_pending_len) |
| 801 |
netif_wake_queue(priv->dev); |
| 802 |
|
| 803 |
kfree(scan_cmd); |
| 804 |
|
| 805 |
/* Wake up anything waiting on scan completion */ |
| 806 |
if (priv->scan_req == NULL) { |
| 807 |
lbs_deb_scan("scan: waking up waiters\n"); |
| 808 |
wake_up_all(&priv->scan_q); |
| 809 |
} |
| 810 |
} |
| 811 |
|
| 812 |
static void _internal_start_scan(struct lbs_private *priv, bool internal, |
| 813 |
struct cfg80211_scan_request *request) |
| 814 |
{ |
| 815 |
lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n", |
| 816 |
request->n_ssids, request->n_channels, request->ie_len); |
| 817 |
|
| 818 |
priv->scan_channel = 0; |
| 819 |
priv->scan_req = request; |
| 820 |
priv->internal_scan = internal; |
| 821 |
|
| 822 |
queue_delayed_work(priv->work_thread, &priv->scan_work, |
| 823 |
msecs_to_jiffies(50)); |
| 824 |
} |
| 825 |
|
| 826 |
/* |
| 827 |
* Clean up priv->scan_req. Should be used to handle the allocation details. |
| 828 |
*/ |
| 829 |
void lbs_scan_done(struct lbs_private *priv) |
| 830 |
{ |
| 831 |
WARN_ON(!priv->scan_req); |
| 832 |
|
| 833 |
if (priv->internal_scan) { |
| 834 |
kfree(priv->scan_req); |
| 835 |
} else { |
| 836 |
struct cfg80211_scan_info info = { |
| 837 |
.aborted = false, |
| 838 |
}; |
| 839 |
|
| 840 |
cfg80211_scan_done(priv->scan_req, &info); |
| 841 |
} |
| 842 |
|
| 843 |
priv->scan_req = NULL; |
| 844 |
} |
| 845 |
|
| 846 |
static int lbs_cfg_scan(struct wiphy *wiphy, |
| 847 |
struct cfg80211_scan_request *request) |
| 848 |
{ |
| 849 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 850 |
int ret = 0; |
| 851 |
|
| 852 |
if (priv->scan_req || delayed_work_pending(&priv->scan_work)) { |
| 853 |
/* old scan request not yet processed */ |
| 854 |
ret = -EAGAIN; |
| 855 |
goto out; |
| 856 |
} |
| 857 |
|
| 858 |
_internal_start_scan(priv, false, request); |
| 859 |
|
| 860 |
if (priv->surpriseremoved) |
| 861 |
ret = -EIO; |
| 862 |
|
| 863 |
out: |
| 864 |
return ret; |
| 865 |
} |
| 866 |
|
| 867 |
|
| 868 |
|
| 869 |
|
| 870 |
/* |
| 871 |
* Events |
| 872 |
*/ |
| 873 |
|
| 874 |
void lbs_send_disconnect_notification(struct lbs_private *priv, |
| 875 |
bool locally_generated) |
| 876 |
{ |
| 877 |
cfg80211_disconnected(priv->dev, 0, NULL, 0, locally_generated, |
| 878 |
GFP_KERNEL); |
| 879 |
} |
| 880 |
|
| 881 |
void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event) |
| 882 |
{ |
| 883 |
cfg80211_michael_mic_failure(priv->dev, |
| 884 |
priv->assoc_bss, |
| 885 |
event == MACREG_INT_CODE_MIC_ERR_MULTICAST ? |
| 886 |
NL80211_KEYTYPE_GROUP : |
| 887 |
NL80211_KEYTYPE_PAIRWISE, |
| 888 |
-1, |
| 889 |
NULL, |
| 890 |
GFP_KERNEL); |
| 891 |
} |
| 892 |
|
| 893 |
|
| 894 |
|
| 895 |
|
| 896 |
/* |
| 897 |
* Connect/disconnect |
| 898 |
*/ |
| 899 |
|
| 900 |
|
| 901 |
/* |
| 902 |
* This removes all WEP keys |
| 903 |
*/ |
| 904 |
static int lbs_remove_wep_keys(struct lbs_private *priv) |
| 905 |
{ |
| 906 |
struct cmd_ds_802_11_set_wep cmd; |
| 907 |
int ret; |
| 908 |
|
| 909 |
memset(&cmd, 0, sizeof(cmd)); |
| 910 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 911 |
cmd.keyindex = cpu_to_le16(priv->wep_tx_key); |
| 912 |
cmd.action = cpu_to_le16(CMD_ACT_REMOVE); |
| 913 |
|
| 914 |
ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); |
| 915 |
|
| 916 |
return ret; |
| 917 |
} |
| 918 |
|
| 919 |
/* |
| 920 |
* Set WEP keys |
| 921 |
*/ |
| 922 |
static int lbs_set_wep_keys(struct lbs_private *priv) |
| 923 |
{ |
| 924 |
struct cmd_ds_802_11_set_wep cmd; |
| 925 |
int i; |
| 926 |
int ret; |
| 927 |
|
| 928 |
/* |
| 929 |
* command 13 00 |
| 930 |
* size 50 00 |
| 931 |
* sequence xx xx |
| 932 |
* result 00 00 |
| 933 |
* action 02 00 ACT_ADD |
| 934 |
* transmit key 00 00 |
| 935 |
* type for key 1 01 WEP40 |
| 936 |
* type for key 2 00 |
| 937 |
* type for key 3 00 |
| 938 |
* type for key 4 00 |
| 939 |
* key 1 39 39 39 39 39 00 00 00 |
| 940 |
* 00 00 00 00 00 00 00 00 |
| 941 |
* key 2 00 00 00 00 00 00 00 00 |
| 942 |
* 00 00 00 00 00 00 00 00 |
| 943 |
* key 3 00 00 00 00 00 00 00 00 |
| 944 |
* 00 00 00 00 00 00 00 00 |
| 945 |
* key 4 00 00 00 00 00 00 00 00 |
| 946 |
*/ |
| 947 |
if (priv->wep_key_len[0] || priv->wep_key_len[1] || |
| 948 |
priv->wep_key_len[2] || priv->wep_key_len[3]) { |
| 949 |
/* Only set wep keys if we have at least one of them */ |
| 950 |
memset(&cmd, 0, sizeof(cmd)); |
| 951 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 952 |
cmd.keyindex = cpu_to_le16(priv->wep_tx_key); |
| 953 |
cmd.action = cpu_to_le16(CMD_ACT_ADD); |
| 954 |
|
| 955 |
for (i = 0; i < 4; i++) { |
| 956 |
switch (priv->wep_key_len[i]) { |
| 957 |
case WLAN_KEY_LEN_WEP40: |
| 958 |
cmd.keytype[i] = CMD_TYPE_WEP_40_BIT; |
| 959 |
break; |
| 960 |
case WLAN_KEY_LEN_WEP104: |
| 961 |
cmd.keytype[i] = CMD_TYPE_WEP_104_BIT; |
| 962 |
break; |
| 963 |
default: |
| 964 |
cmd.keytype[i] = 0; |
| 965 |
break; |
| 966 |
} |
| 967 |
memcpy(cmd.keymaterial[i], priv->wep_key[i], |
| 968 |
priv->wep_key_len[i]); |
| 969 |
} |
| 970 |
|
| 971 |
ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd); |
| 972 |
} else { |
| 973 |
/* Otherwise remove all wep keys */ |
| 974 |
ret = lbs_remove_wep_keys(priv); |
| 975 |
} |
| 976 |
|
| 977 |
return ret; |
| 978 |
} |
| 979 |
|
| 980 |
|
| 981 |
/* |
| 982 |
* Enable/Disable RSN status |
| 983 |
*/ |
| 984 |
static int lbs_enable_rsn(struct lbs_private *priv, int enable) |
| 985 |
{ |
| 986 |
struct cmd_ds_802_11_enable_rsn cmd; |
| 987 |
int ret; |
| 988 |
|
| 989 |
/* |
| 990 |
* cmd 2f 00 |
| 991 |
* size 0c 00 |
| 992 |
* sequence xx xx |
| 993 |
* result 00 00 |
| 994 |
* action 01 00 ACT_SET |
| 995 |
* enable 01 00 |
| 996 |
*/ |
| 997 |
memset(&cmd, 0, sizeof(cmd)); |
| 998 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 999 |
cmd.action = cpu_to_le16(CMD_ACT_SET); |
| 1000 |
cmd.enable = cpu_to_le16(enable); |
| 1001 |
|
| 1002 |
ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd); |
| 1003 |
|
| 1004 |
return ret; |
| 1005 |
} |
| 1006 |
|
| 1007 |
|
| 1008 |
/* |
| 1009 |
* Set WPA/WPA key material |
| 1010 |
*/ |
| 1011 |
|
| 1012 |
/* |
| 1013 |
* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we |
| 1014 |
* get rid of WEXT, this should go into host.h |
| 1015 |
*/ |
| 1016 |
|
| 1017 |
struct cmd_key_material { |
| 1018 |
struct cmd_header hdr; |
| 1019 |
|
| 1020 |
__le16 action; |
| 1021 |
struct MrvlIEtype_keyParamSet param; |
| 1022 |
} __packed; |
| 1023 |
|
| 1024 |
static int lbs_set_key_material(struct lbs_private *priv, |
| 1025 |
int key_type, int key_info, |
| 1026 |
const u8 *key, u16 key_len) |
| 1027 |
{ |
| 1028 |
struct cmd_key_material cmd; |
| 1029 |
int ret; |
| 1030 |
|
| 1031 |
/* |
| 1032 |
* Example for WPA (TKIP): |
| 1033 |
* |
| 1034 |
* cmd 5e 00 |
| 1035 |
* size 34 00 |
| 1036 |
* sequence xx xx |
| 1037 |
* result 00 00 |
| 1038 |
* action 01 00 |
| 1039 |
* TLV type 00 01 key param |
| 1040 |
* length 00 26 |
| 1041 |
* key type 01 00 TKIP |
| 1042 |
* key info 06 00 UNICAST | ENABLED |
| 1043 |
* key len 20 00 |
| 1044 |
* key 32 bytes |
| 1045 |
*/ |
| 1046 |
memset(&cmd, 0, sizeof(cmd)); |
| 1047 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 1048 |
cmd.action = cpu_to_le16(CMD_ACT_SET); |
| 1049 |
cmd.param.type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL); |
| 1050 |
cmd.param.length = cpu_to_le16(sizeof(cmd.param) - 4); |
| 1051 |
cmd.param.keytypeid = cpu_to_le16(key_type); |
| 1052 |
cmd.param.keyinfo = cpu_to_le16(key_info); |
| 1053 |
cmd.param.keylen = cpu_to_le16(key_len); |
| 1054 |
if (key && key_len) |
| 1055 |
memcpy(cmd.param.key, key, key_len); |
| 1056 |
|
| 1057 |
ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd); |
| 1058 |
|
| 1059 |
return ret; |
| 1060 |
} |
| 1061 |
|
| 1062 |
|
| 1063 |
/* |
| 1064 |
* Sets the auth type (open, shared, etc) in the firmware. That |
| 1065 |
* we use CMD_802_11_AUTHENTICATE is misleading, this firmware |
| 1066 |
* command doesn't send an authentication frame at all, it just |
| 1067 |
* stores the auth_type. |
| 1068 |
*/ |
| 1069 |
static int lbs_set_authtype(struct lbs_private *priv, |
| 1070 |
struct cfg80211_connect_params *sme) |
| 1071 |
{ |
| 1072 |
struct cmd_ds_802_11_authenticate cmd; |
| 1073 |
int ret; |
| 1074 |
|
| 1075 |
/* |
| 1076 |
* cmd 11 00 |
| 1077 |
* size 19 00 |
| 1078 |
* sequence xx xx |
| 1079 |
* result 00 00 |
| 1080 |
* BSS id 00 13 19 80 da 30 |
| 1081 |
* auth type 00 |
| 1082 |
* reserved 00 00 00 00 00 00 00 00 00 00 |
| 1083 |
*/ |
| 1084 |
memset(&cmd, 0, sizeof(cmd)); |
| 1085 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 1086 |
if (sme->bssid) |
| 1087 |
memcpy(cmd.bssid, sme->bssid, ETH_ALEN); |
| 1088 |
/* convert auth_type */ |
| 1089 |
ret = lbs_auth_to_authtype(sme->auth_type); |
| 1090 |
if (ret < 0) |
| 1091 |
goto done; |
| 1092 |
|
| 1093 |
cmd.authtype = ret; |
| 1094 |
ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); |
| 1095 |
|
| 1096 |
done: |
| 1097 |
return ret; |
| 1098 |
} |
| 1099 |
|
| 1100 |
|
| 1101 |
/* |
| 1102 |
* Create association request |
| 1103 |
*/ |
| 1104 |
#define LBS_ASSOC_MAX_CMD_SIZE \ |
| 1105 |
(sizeof(struct cmd_ds_802_11_associate) \ |
| 1106 |
+ LBS_MAX_SSID_TLV_SIZE \ |
| 1107 |
+ LBS_MAX_CHANNEL_TLV_SIZE \ |
| 1108 |
+ LBS_MAX_CF_PARAM_TLV_SIZE \ |
| 1109 |
+ LBS_MAX_AUTH_TYPE_TLV_SIZE \ |
| 1110 |
+ LBS_MAX_WPA_TLV_SIZE) |
| 1111 |
|
| 1112 |
static int lbs_associate(struct lbs_private *priv, |
| 1113 |
struct cfg80211_bss *bss, |
| 1114 |
struct cfg80211_connect_params *sme) |
| 1115 |
{ |
| 1116 |
struct cmd_ds_802_11_associate_response *resp; |
| 1117 |
struct cmd_ds_802_11_associate *cmd = kzalloc(LBS_ASSOC_MAX_CMD_SIZE, |
| 1118 |
GFP_KERNEL); |
| 1119 |
const u8 *ssid_eid; |
| 1120 |
size_t len, resp_ie_len; |
| 1121 |
int status; |
| 1122 |
int ret; |
| 1123 |
u8 *pos; |
| 1124 |
u8 *tmp; |
| 1125 |
|
| 1126 |
if (!cmd) { |
| 1127 |
ret = -ENOMEM; |
| 1128 |
goto done; |
| 1129 |
} |
| 1130 |
pos = &cmd->iebuf[0]; |
| 1131 |
|
| 1132 |
/* |
| 1133 |
* cmd 50 00 |
| 1134 |
* length 34 00 |
| 1135 |
* sequence xx xx |
| 1136 |
* result 00 00 |
| 1137 |
* BSS id 00 13 19 80 da 30 |
| 1138 |
* capabilities 11 00 |
| 1139 |
* listen interval 0a 00 |
| 1140 |
* beacon interval 00 00 |
| 1141 |
* DTIM period 00 |
| 1142 |
* TLVs xx (up to 512 bytes) |
| 1143 |
*/ |
| 1144 |
cmd->hdr.command = cpu_to_le16(CMD_802_11_ASSOCIATE); |
| 1145 |
|
| 1146 |
/* Fill in static fields */ |
| 1147 |
memcpy(cmd->bssid, bss->bssid, ETH_ALEN); |
| 1148 |
cmd->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); |
| 1149 |
cmd->capability = cpu_to_le16(bss->capability); |
| 1150 |
|
| 1151 |
/* add SSID TLV */ |
| 1152 |
rcu_read_lock(); |
| 1153 |
ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); |
| 1154 |
if (ssid_eid) { |
| 1155 |
u32 ssid_len = min(ssid_eid[1], IEEE80211_MAX_SSID_LEN); |
| 1156 |
|
| 1157 |
pos += lbs_add_ssid_tlv(pos, ssid_eid + 2, ssid_len); |
| 1158 |
} else { |
| 1159 |
lbs_deb_assoc("no SSID\n"); |
| 1160 |
} |
| 1161 |
rcu_read_unlock(); |
| 1162 |
|
| 1163 |
/* add DS param TLV */ |
| 1164 |
if (bss->channel) |
| 1165 |
pos += lbs_add_channel_tlv(pos, bss->channel->hw_value); |
| 1166 |
else |
| 1167 |
lbs_deb_assoc("no channel\n"); |
| 1168 |
|
| 1169 |
/* add (empty) CF param TLV */ |
| 1170 |
pos += lbs_add_cf_param_tlv(pos); |
| 1171 |
|
| 1172 |
/* add rates TLV */ |
| 1173 |
tmp = pos + 4; /* skip Marvell IE header */ |
| 1174 |
pos += lbs_add_common_rates_tlv(pos, bss); |
| 1175 |
lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp); |
| 1176 |
|
| 1177 |
/* add auth type TLV */ |
| 1178 |
if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9) |
| 1179 |
pos += lbs_add_auth_type_tlv(pos, sme->auth_type); |
| 1180 |
|
| 1181 |
/* add WPA/WPA2 TLV */ |
| 1182 |
if (sme->ie && sme->ie_len) |
| 1183 |
pos += lbs_add_wpa_tlv(pos, sme->ie, sme->ie_len); |
| 1184 |
|
| 1185 |
len = sizeof(*cmd) + (u16)(pos - (u8 *) &cmd->iebuf); |
| 1186 |
cmd->hdr.size = cpu_to_le16(len); |
| 1187 |
|
| 1188 |
lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd, |
| 1189 |
le16_to_cpu(cmd->hdr.size)); |
| 1190 |
|
| 1191 |
/* store for later use */ |
| 1192 |
memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN); |
| 1193 |
|
| 1194 |
ret = lbs_cmd_with_response(priv, CMD_802_11_ASSOCIATE, cmd); |
| 1195 |
if (ret) |
| 1196 |
goto done; |
| 1197 |
|
| 1198 |
/* generate connect message to cfg80211 */ |
| 1199 |
|
| 1200 |
resp = (void *) cmd; /* recast for easier field access */ |
| 1201 |
status = le16_to_cpu(resp->statuscode); |
| 1202 |
|
| 1203 |
/* Older FW versions map the IEEE 802.11 Status Code in the association |
| 1204 |
* response to the following values returned in resp->statuscode: |
| 1205 |
* |
| 1206 |
* IEEE Status Code Marvell Status Code |
| 1207 |
* 0 -> 0x0000 ASSOC_RESULT_SUCCESS |
| 1208 |
* 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| 1209 |
* 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| 1210 |
* 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| 1211 |
* 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| 1212 |
* others -> 0x0003 ASSOC_RESULT_REFUSED |
| 1213 |
* |
| 1214 |
* Other response codes: |
| 1215 |
* 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) |
| 1216 |
* 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for |
| 1217 |
* association response from the AP) |
| 1218 |
*/ |
| 1219 |
if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { |
| 1220 |
switch (status) { |
| 1221 |
case 0: |
| 1222 |
break; |
| 1223 |
case 1: |
| 1224 |
lbs_deb_assoc("invalid association parameters\n"); |
| 1225 |
status = WLAN_STATUS_CAPS_UNSUPPORTED; |
| 1226 |
break; |
| 1227 |
case 2: |
| 1228 |
lbs_deb_assoc("timer expired while waiting for AP\n"); |
| 1229 |
status = WLAN_STATUS_AUTH_TIMEOUT; |
| 1230 |
break; |
| 1231 |
case 3: |
| 1232 |
lbs_deb_assoc("association refused by AP\n"); |
| 1233 |
status = WLAN_STATUS_ASSOC_DENIED_UNSPEC; |
| 1234 |
break; |
| 1235 |
case 4: |
| 1236 |
lbs_deb_assoc("authentication refused by AP\n"); |
| 1237 |
status = WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION; |
| 1238 |
break; |
| 1239 |
default: |
| 1240 |
lbs_deb_assoc("association failure %d\n", status); |
| 1241 |
/* v5 OLPC firmware does return the AP status code if |
| 1242 |
* it's not one of the values above. Let that through. |
| 1243 |
*/ |
| 1244 |
break; |
| 1245 |
} |
| 1246 |
} |
| 1247 |
|
| 1248 |
lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, " |
| 1249 |
"aid 0x%04x\n", status, le16_to_cpu(resp->statuscode), |
| 1250 |
le16_to_cpu(resp->capability), le16_to_cpu(resp->aid)); |
| 1251 |
|
| 1252 |
resp_ie_len = le16_to_cpu(resp->hdr.size) |
| 1253 |
- sizeof(resp->hdr) |
| 1254 |
- 6; |
| 1255 |
cfg80211_connect_result(priv->dev, |
| 1256 |
priv->assoc_bss, |
| 1257 |
sme->ie, sme->ie_len, |
| 1258 |
resp->iebuf, resp_ie_len, |
| 1259 |
status, |
| 1260 |
GFP_KERNEL); |
| 1261 |
|
| 1262 |
if (status == 0) { |
| 1263 |
/* TODO: get rid of priv->connect_status */ |
| 1264 |
priv->connect_status = LBS_CONNECTED; |
| 1265 |
netif_carrier_on(priv->dev); |
| 1266 |
if (!priv->tx_pending_len) |
| 1267 |
netif_tx_wake_all_queues(priv->dev); |
| 1268 |
} |
| 1269 |
|
| 1270 |
kfree(cmd); |
| 1271 |
done: |
| 1272 |
return ret; |
| 1273 |
} |
| 1274 |
|
| 1275 |
static struct cfg80211_scan_request * |
| 1276 |
_new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme) |
| 1277 |
{ |
| 1278 |
struct cfg80211_scan_request *creq = NULL; |
| 1279 |
int i, n_channels = ieee80211_get_num_supported_channels(wiphy); |
| 1280 |
enum nl80211_band band; |
| 1281 |
|
| 1282 |
creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + |
| 1283 |
n_channels * sizeof(void *), |
| 1284 |
GFP_ATOMIC); |
| 1285 |
if (!creq) |
| 1286 |
return NULL; |
| 1287 |
|
| 1288 |
/* SSIDs come after channels */ |
| 1289 |
creq->ssids = (void *)&creq->channels[n_channels]; |
| 1290 |
creq->n_channels = n_channels; |
| 1291 |
creq->n_ssids = 1; |
| 1292 |
|
| 1293 |
/* Scan all available channels */ |
| 1294 |
i = 0; |
| 1295 |
for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| 1296 |
int j; |
| 1297 |
|
| 1298 |
if (!wiphy->bands[band]) |
| 1299 |
continue; |
| 1300 |
|
| 1301 |
for (j = 0; j < wiphy->bands[band]->n_channels; j++) { |
| 1302 |
/* ignore disabled channels */ |
| 1303 |
if (wiphy->bands[band]->channels[j].flags & |
| 1304 |
IEEE80211_CHAN_DISABLED) |
| 1305 |
continue; |
| 1306 |
|
| 1307 |
creq->channels[i] = &wiphy->bands[band]->channels[j]; |
| 1308 |
i++; |
| 1309 |
} |
| 1310 |
} |
| 1311 |
if (i) { |
| 1312 |
/* Set real number of channels specified in creq->channels[] */ |
| 1313 |
creq->n_channels = i; |
| 1314 |
|
| 1315 |
/* Scan for the SSID we're going to connect to */ |
| 1316 |
memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len); |
| 1317 |
creq->ssids[0].ssid_len = sme->ssid_len; |
| 1318 |
} else { |
| 1319 |
/* No channels found... */ |
| 1320 |
kfree(creq); |
| 1321 |
creq = NULL; |
| 1322 |
} |
| 1323 |
|
| 1324 |
return creq; |
| 1325 |
} |
| 1326 |
|
| 1327 |
static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, |
| 1328 |
struct cfg80211_connect_params *sme) |
| 1329 |
{ |
| 1330 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1331 |
struct cfg80211_bss *bss = NULL; |
| 1332 |
int ret = 0; |
| 1333 |
u8 preamble = RADIO_PREAMBLE_SHORT; |
| 1334 |
|
| 1335 |
if (dev == priv->mesh_dev) |
| 1336 |
return -EOPNOTSUPP; |
| 1337 |
|
| 1338 |
if (!sme->bssid) { |
| 1339 |
struct cfg80211_scan_request *creq; |
| 1340 |
|
| 1341 |
/* |
| 1342 |
* Scan for the requested network after waiting for existing |
| 1343 |
* scans to finish. |
| 1344 |
*/ |
| 1345 |
lbs_deb_assoc("assoc: waiting for existing scans\n"); |
| 1346 |
wait_event_interruptible_timeout(priv->scan_q, |
| 1347 |
(priv->scan_req == NULL), |
| 1348 |
(15 * HZ)); |
| 1349 |
|
| 1350 |
creq = _new_connect_scan_req(wiphy, sme); |
| 1351 |
if (!creq) { |
| 1352 |
ret = -EINVAL; |
| 1353 |
goto done; |
| 1354 |
} |
| 1355 |
|
| 1356 |
lbs_deb_assoc("assoc: scanning for compatible AP\n"); |
| 1357 |
_internal_start_scan(priv, true, creq); |
| 1358 |
|
| 1359 |
lbs_deb_assoc("assoc: waiting for scan to complete\n"); |
| 1360 |
wait_event_interruptible_timeout(priv->scan_q, |
| 1361 |
(priv->scan_req == NULL), |
| 1362 |
(15 * HZ)); |
| 1363 |
lbs_deb_assoc("assoc: scanning completed\n"); |
| 1364 |
} |
| 1365 |
|
| 1366 |
/* Find the BSS we want using available scan results */ |
| 1367 |
bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid, |
| 1368 |
sme->ssid, sme->ssid_len, IEEE80211_BSS_TYPE_ESS, |
| 1369 |
IEEE80211_PRIVACY_ANY); |
| 1370 |
if (!bss) { |
| 1371 |
wiphy_err(wiphy, "assoc: bss %pM not in scan results\n", |
| 1372 |
sme->bssid); |
| 1373 |
ret = -ENOENT; |
| 1374 |
goto done; |
| 1375 |
} |
| 1376 |
lbs_deb_assoc("trying %pM\n", bss->bssid); |
| 1377 |
lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n", |
| 1378 |
sme->crypto.cipher_group, |
| 1379 |
sme->key_idx, sme->key_len); |
| 1380 |
|
| 1381 |
/* As this is a new connection, clear locally stored WEP keys */ |
| 1382 |
priv->wep_tx_key = 0; |
| 1383 |
memset(priv->wep_key, 0, sizeof(priv->wep_key)); |
| 1384 |
memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len)); |
| 1385 |
|
| 1386 |
/* set/remove WEP keys */ |
| 1387 |
switch (sme->crypto.cipher_group) { |
| 1388 |
case WLAN_CIPHER_SUITE_WEP40: |
| 1389 |
case WLAN_CIPHER_SUITE_WEP104: |
| 1390 |
/* Store provided WEP keys in priv-> */ |
| 1391 |
priv->wep_tx_key = sme->key_idx; |
| 1392 |
priv->wep_key_len[sme->key_idx] = sme->key_len; |
| 1393 |
memcpy(priv->wep_key[sme->key_idx], sme->key, sme->key_len); |
| 1394 |
/* Set WEP keys and WEP mode */ |
| 1395 |
lbs_set_wep_keys(priv); |
| 1396 |
priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE; |
| 1397 |
lbs_set_mac_control(priv); |
| 1398 |
/* No RSN mode for WEP */ |
| 1399 |
lbs_enable_rsn(priv, 0); |
| 1400 |
break; |
| 1401 |
case 0: /* there's no WLAN_CIPHER_SUITE_NONE definition */ |
| 1402 |
/* |
| 1403 |
* If we don't have no WEP, no WPA and no WPA2, |
| 1404 |
* we remove all keys like in the WPA/WPA2 setup, |
| 1405 |
* we just don't set RSN. |
| 1406 |
* |
| 1407 |
* Therefore: fall-through |
| 1408 |
*/ |
| 1409 |
case WLAN_CIPHER_SUITE_TKIP: |
| 1410 |
case WLAN_CIPHER_SUITE_CCMP: |
| 1411 |
/* Remove WEP keys and WEP mode */ |
| 1412 |
lbs_remove_wep_keys(priv); |
| 1413 |
priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE; |
| 1414 |
lbs_set_mac_control(priv); |
| 1415 |
|
| 1416 |
/* clear the WPA/WPA2 keys */ |
| 1417 |
lbs_set_key_material(priv, |
| 1418 |
KEY_TYPE_ID_WEP, /* doesn't matter */ |
| 1419 |
KEY_INFO_WPA_UNICAST, |
| 1420 |
NULL, 0); |
| 1421 |
lbs_set_key_material(priv, |
| 1422 |
KEY_TYPE_ID_WEP, /* doesn't matter */ |
| 1423 |
KEY_INFO_WPA_MCAST, |
| 1424 |
NULL, 0); |
| 1425 |
/* RSN mode for WPA/WPA2 */ |
| 1426 |
lbs_enable_rsn(priv, sme->crypto.cipher_group != 0); |
| 1427 |
break; |
| 1428 |
default: |
| 1429 |
wiphy_err(wiphy, "unsupported cipher group 0x%x\n", |
| 1430 |
sme->crypto.cipher_group); |
| 1431 |
ret = -ENOTSUPP; |
| 1432 |
goto done; |
| 1433 |
} |
| 1434 |
|
| 1435 |
ret = lbs_set_authtype(priv, sme); |
| 1436 |
if (ret == -ENOTSUPP) { |
| 1437 |
wiphy_err(wiphy, "unsupported authtype 0x%x\n", sme->auth_type); |
| 1438 |
goto done; |
| 1439 |
} |
| 1440 |
|
| 1441 |
lbs_set_radio(priv, preamble, 1); |
| 1442 |
|
| 1443 |
/* Do the actual association */ |
| 1444 |
ret = lbs_associate(priv, bss, sme); |
| 1445 |
|
| 1446 |
done: |
| 1447 |
if (bss) |
| 1448 |
cfg80211_put_bss(wiphy, bss); |
| 1449 |
return ret; |
| 1450 |
} |
| 1451 |
|
| 1452 |
int lbs_disconnect(struct lbs_private *priv, u16 reason) |
| 1453 |
{ |
| 1454 |
struct cmd_ds_802_11_deauthenticate cmd; |
| 1455 |
int ret; |
| 1456 |
|
| 1457 |
memset(&cmd, 0, sizeof(cmd)); |
| 1458 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 1459 |
/* Mildly ugly to use a locally store my own BSSID ... */ |
| 1460 |
memcpy(cmd.macaddr, &priv->assoc_bss, ETH_ALEN); |
| 1461 |
cmd.reasoncode = cpu_to_le16(reason); |
| 1462 |
|
| 1463 |
ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd); |
| 1464 |
if (ret) |
| 1465 |
return ret; |
| 1466 |
|
| 1467 |
cfg80211_disconnected(priv->dev, |
| 1468 |
reason, |
| 1469 |
NULL, 0, true, |
| 1470 |
GFP_KERNEL); |
| 1471 |
priv->connect_status = LBS_DISCONNECTED; |
| 1472 |
|
| 1473 |
return 0; |
| 1474 |
} |
| 1475 |
|
| 1476 |
static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev, |
| 1477 |
u16 reason_code) |
| 1478 |
{ |
| 1479 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1480 |
|
| 1481 |
if (dev == priv->mesh_dev) |
| 1482 |
return -EOPNOTSUPP; |
| 1483 |
|
| 1484 |
/* store for lbs_cfg_ret_disconnect() */ |
| 1485 |
priv->disassoc_reason = reason_code; |
| 1486 |
|
| 1487 |
return lbs_disconnect(priv, reason_code); |
| 1488 |
} |
| 1489 |
|
| 1490 |
static int lbs_cfg_set_default_key(struct wiphy *wiphy, |
| 1491 |
struct net_device *netdev, int link_id, |
| 1492 |
u8 key_index, bool unicast, |
| 1493 |
bool multicast) |
| 1494 |
{ |
| 1495 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1496 |
|
| 1497 |
if (netdev == priv->mesh_dev) |
| 1498 |
return -EOPNOTSUPP; |
| 1499 |
|
| 1500 |
if (key_index != priv->wep_tx_key) { |
| 1501 |
lbs_deb_assoc("set_default_key: to %d\n", key_index); |
| 1502 |
priv->wep_tx_key = key_index; |
| 1503 |
lbs_set_wep_keys(priv); |
| 1504 |
} |
| 1505 |
|
| 1506 |
return 0; |
| 1507 |
} |
| 1508 |
|
| 1509 |
|
| 1510 |
static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev, |
| 1511 |
int link_id, u8 idx, bool pairwise, |
| 1512 |
const u8 *mac_addr, struct key_params *params) |
| 1513 |
{ |
| 1514 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1515 |
u16 key_info; |
| 1516 |
u16 key_type; |
| 1517 |
int ret = 0; |
| 1518 |
|
| 1519 |
if (netdev == priv->mesh_dev) |
| 1520 |
return -EOPNOTSUPP; |
| 1521 |
|
| 1522 |
lbs_deb_assoc("add_key: cipher 0x%x, mac_addr %pM\n", |
| 1523 |
params->cipher, mac_addr); |
| 1524 |
lbs_deb_assoc("add_key: key index %d, key len %d\n", |
| 1525 |
idx, params->key_len); |
| 1526 |
if (params->key_len) |
| 1527 |
lbs_deb_hex(LBS_DEB_CFG80211, "KEY", |
| 1528 |
params->key, params->key_len); |
| 1529 |
|
| 1530 |
lbs_deb_assoc("add_key: seq len %d\n", params->seq_len); |
| 1531 |
if (params->seq_len) |
| 1532 |
lbs_deb_hex(LBS_DEB_CFG80211, "SEQ", |
| 1533 |
params->seq, params->seq_len); |
| 1534 |
|
| 1535 |
switch (params->cipher) { |
| 1536 |
case WLAN_CIPHER_SUITE_WEP40: |
| 1537 |
case WLAN_CIPHER_SUITE_WEP104: |
| 1538 |
/* actually compare if something has changed ... */ |
| 1539 |
if ((priv->wep_key_len[idx] != params->key_len) || |
| 1540 |
memcmp(priv->wep_key[idx], |
| 1541 |
params->key, params->key_len) != 0) { |
| 1542 |
priv->wep_key_len[idx] = params->key_len; |
| 1543 |
memcpy(priv->wep_key[idx], |
| 1544 |
params->key, params->key_len); |
| 1545 |
lbs_set_wep_keys(priv); |
| 1546 |
} |
| 1547 |
break; |
| 1548 |
case WLAN_CIPHER_SUITE_TKIP: |
| 1549 |
case WLAN_CIPHER_SUITE_CCMP: |
| 1550 |
key_info = KEY_INFO_WPA_ENABLED | ((idx == 0) |
| 1551 |
? KEY_INFO_WPA_UNICAST |
| 1552 |
: KEY_INFO_WPA_MCAST); |
| 1553 |
key_type = (params->cipher == WLAN_CIPHER_SUITE_TKIP) |
| 1554 |
? KEY_TYPE_ID_TKIP |
| 1555 |
: KEY_TYPE_ID_AES; |
| 1556 |
lbs_set_key_material(priv, |
| 1557 |
key_type, |
| 1558 |
key_info, |
| 1559 |
params->key, params->key_len); |
| 1560 |
break; |
| 1561 |
default: |
| 1562 |
wiphy_err(wiphy, "unhandled cipher 0x%x\n", params->cipher); |
| 1563 |
ret = -ENOTSUPP; |
| 1564 |
break; |
| 1565 |
} |
| 1566 |
|
| 1567 |
return ret; |
| 1568 |
} |
| 1569 |
|
| 1570 |
|
| 1571 |
static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev, |
| 1572 |
int link_id, u8 key_index, bool pairwise, |
| 1573 |
const u8 *mac_addr) |
| 1574 |
{ |
| 1575 |
|
| 1576 |
lbs_deb_assoc("del_key: key_idx %d, mac_addr %pM\n", |
| 1577 |
key_index, mac_addr); |
| 1578 |
|
| 1579 |
#ifdef TODO |
| 1580 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1581 |
/* |
| 1582 |
* I think can keep this a NO-OP, because: |
| 1583 |
|
| 1584 |
* - we clear all keys whenever we do lbs_cfg_connect() anyway |
| 1585 |
* - neither "iw" nor "wpa_supplicant" won't call this during |
| 1586 |
* an ongoing connection |
| 1587 |
* - TODO: but I have to check if this is still true when |
| 1588 |
* I set the AP to periodic re-keying |
| 1589 |
* - we've not kzallec() something when we've added a key at |
| 1590 |
* lbs_cfg_connect() or lbs_cfg_add_key(). |
| 1591 |
* |
| 1592 |
* This causes lbs_cfg_del_key() only called at disconnect time, |
| 1593 |
* where we'd just waste time deleting a key that is not going |
| 1594 |
* to be used anyway. |
| 1595 |
*/ |
| 1596 |
if (key_index < 3 && priv->wep_key_len[key_index]) { |
| 1597 |
priv->wep_key_len[key_index] = 0; |
| 1598 |
lbs_set_wep_keys(priv); |
| 1599 |
} |
| 1600 |
#endif |
| 1601 |
|
| 1602 |
return 0; |
| 1603 |
} |
| 1604 |
|
| 1605 |
|
| 1606 |
/* |
| 1607 |
* Get station |
| 1608 |
*/ |
| 1609 |
|
| 1610 |
static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev, |
| 1611 |
const u8 *mac, struct station_info *sinfo) |
| 1612 |
{ |
| 1613 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1614 |
s8 signal, noise; |
| 1615 |
int ret; |
| 1616 |
size_t i; |
| 1617 |
|
| 1618 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BYTES) | |
| 1619 |
BIT_ULL(NL80211_STA_INFO_TX_PACKETS) | |
| 1620 |
BIT_ULL(NL80211_STA_INFO_RX_BYTES) | |
| 1621 |
BIT_ULL(NL80211_STA_INFO_RX_PACKETS); |
| 1622 |
sinfo->tx_bytes = priv->dev->stats.tx_bytes; |
| 1623 |
sinfo->tx_packets = priv->dev->stats.tx_packets; |
| 1624 |
sinfo->rx_bytes = priv->dev->stats.rx_bytes; |
| 1625 |
sinfo->rx_packets = priv->dev->stats.rx_packets; |
| 1626 |
|
| 1627 |
/* Get current RSSI */ |
| 1628 |
ret = lbs_get_rssi(priv, &signal, &noise); |
| 1629 |
if (ret == 0) { |
| 1630 |
sinfo->signal = signal; |
| 1631 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); |
| 1632 |
} |
| 1633 |
|
| 1634 |
/* Convert priv->cur_rate from hw_value to NL80211 value */ |
| 1635 |
for (i = 0; i < ARRAY_SIZE(lbs_rates); i++) { |
| 1636 |
if (priv->cur_rate == lbs_rates[i].hw_value) { |
| 1637 |
sinfo->txrate.legacy = lbs_rates[i].bitrate; |
| 1638 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); |
| 1639 |
break; |
| 1640 |
} |
| 1641 |
} |
| 1642 |
|
| 1643 |
return 0; |
| 1644 |
} |
| 1645 |
|
| 1646 |
|
| 1647 |
|
| 1648 |
|
| 1649 |
/* |
| 1650 |
* Change interface |
| 1651 |
*/ |
| 1652 |
|
| 1653 |
static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev, |
| 1654 |
enum nl80211_iftype type, |
| 1655 |
struct vif_params *params) |
| 1656 |
{ |
| 1657 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1658 |
int ret = 0; |
| 1659 |
|
| 1660 |
if (dev == priv->mesh_dev) |
| 1661 |
return -EOPNOTSUPP; |
| 1662 |
|
| 1663 |
switch (type) { |
| 1664 |
case NL80211_IFTYPE_MONITOR: |
| 1665 |
case NL80211_IFTYPE_STATION: |
| 1666 |
case NL80211_IFTYPE_ADHOC: |
| 1667 |
break; |
| 1668 |
default: |
| 1669 |
return -EOPNOTSUPP; |
| 1670 |
} |
| 1671 |
|
| 1672 |
if (priv->iface_running) |
| 1673 |
ret = lbs_set_iface_type(priv, type); |
| 1674 |
|
| 1675 |
if (!ret) |
| 1676 |
priv->wdev->iftype = type; |
| 1677 |
|
| 1678 |
return ret; |
| 1679 |
} |
| 1680 |
|
| 1681 |
|
| 1682 |
|
| 1683 |
/* |
| 1684 |
* IBSS (Ad-Hoc) |
| 1685 |
*/ |
| 1686 |
|
| 1687 |
/* |
| 1688 |
* The firmware needs the following bits masked out of the beacon-derived |
| 1689 |
* capability field when associating/joining to a BSS: |
| 1690 |
* 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) |
| 1691 |
*/ |
| 1692 |
#define CAPINFO_MASK (~(0xda00)) |
| 1693 |
|
| 1694 |
|
| 1695 |
static void lbs_join_post(struct lbs_private *priv, |
| 1696 |
struct cfg80211_ibss_params *params, |
| 1697 |
u8 *bssid, u16 capability) |
| 1698 |
{ |
| 1699 |
u8 fake_ie[2 + IEEE80211_MAX_SSID_LEN + /* ssid */ |
| 1700 |
2 + 4 + /* basic rates */ |
| 1701 |
2 + 1 + /* DS parameter */ |
| 1702 |
2 + 2 + /* atim */ |
| 1703 |
2 + 8]; /* extended rates */ |
| 1704 |
u8 *fake = fake_ie; |
| 1705 |
struct cfg80211_bss *bss; |
| 1706 |
|
| 1707 |
/* |
| 1708 |
* For cfg80211_inform_bss, we'll need a fake IE, as we can't get |
| 1709 |
* the real IE from the firmware. So we fabricate a fake IE based on |
| 1710 |
* what the firmware actually sends (sniffed with wireshark). |
| 1711 |
*/ |
| 1712 |
/* Fake SSID IE */ |
| 1713 |
*fake++ = WLAN_EID_SSID; |
| 1714 |
*fake++ = params->ssid_len; |
| 1715 |
memcpy(fake, params->ssid, params->ssid_len); |
| 1716 |
fake += params->ssid_len; |
| 1717 |
/* Fake supported basic rates IE */ |
| 1718 |
*fake++ = WLAN_EID_SUPP_RATES; |
| 1719 |
*fake++ = 4; |
| 1720 |
*fake++ = 0x82; |
| 1721 |
*fake++ = 0x84; |
| 1722 |
*fake++ = 0x8b; |
| 1723 |
*fake++ = 0x96; |
| 1724 |
/* Fake DS channel IE */ |
| 1725 |
*fake++ = WLAN_EID_DS_PARAMS; |
| 1726 |
*fake++ = 1; |
| 1727 |
*fake++ = params->chandef.chan->hw_value; |
| 1728 |
/* Fake IBSS params IE */ |
| 1729 |
*fake++ = WLAN_EID_IBSS_PARAMS; |
| 1730 |
*fake++ = 2; |
| 1731 |
*fake++ = 0; /* ATIM=0 */ |
| 1732 |
*fake++ = 0; |
| 1733 |
/* Fake extended rates IE, TODO: don't add this for 802.11b only, |
| 1734 |
* but I don't know how this could be checked */ |
| 1735 |
*fake++ = WLAN_EID_EXT_SUPP_RATES; |
| 1736 |
*fake++ = 8; |
| 1737 |
*fake++ = 0x0c; |
| 1738 |
*fake++ = 0x12; |
| 1739 |
*fake++ = 0x18; |
| 1740 |
*fake++ = 0x24; |
| 1741 |
*fake++ = 0x30; |
| 1742 |
*fake++ = 0x48; |
| 1743 |
*fake++ = 0x60; |
| 1744 |
*fake++ = 0x6c; |
| 1745 |
lbs_deb_hex(LBS_DEB_CFG80211, "IE", fake_ie, fake - fake_ie); |
| 1746 |
|
| 1747 |
bss = cfg80211_inform_bss(priv->wdev->wiphy, |
| 1748 |
params->chandef.chan, |
| 1749 |
CFG80211_BSS_FTYPE_UNKNOWN, |
| 1750 |
bssid, |
| 1751 |
0, |
| 1752 |
capability, |
| 1753 |
params->beacon_interval, |
| 1754 |
fake_ie, fake - fake_ie, |
| 1755 |
0, GFP_KERNEL); |
| 1756 |
cfg80211_put_bss(priv->wdev->wiphy, bss); |
| 1757 |
|
| 1758 |
cfg80211_ibss_joined(priv->dev, bssid, params->chandef.chan, |
| 1759 |
GFP_KERNEL); |
| 1760 |
|
| 1761 |
/* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */ |
| 1762 |
priv->connect_status = LBS_CONNECTED; |
| 1763 |
netif_carrier_on(priv->dev); |
| 1764 |
if (!priv->tx_pending_len) |
| 1765 |
netif_wake_queue(priv->dev); |
| 1766 |
} |
| 1767 |
|
| 1768 |
static int lbs_ibss_join_existing(struct lbs_private *priv, |
| 1769 |
struct cfg80211_ibss_params *params, |
| 1770 |
struct cfg80211_bss *bss) |
| 1771 |
{ |
| 1772 |
const u8 *rates_eid; |
| 1773 |
struct cmd_ds_802_11_ad_hoc_join cmd; |
| 1774 |
u8 preamble = RADIO_PREAMBLE_SHORT; |
| 1775 |
int ret = 0; |
| 1776 |
int hw, i; |
| 1777 |
u8 rates_max; |
| 1778 |
u8 *rates; |
| 1779 |
|
| 1780 |
/* TODO: set preamble based on scan result */ |
| 1781 |
ret = lbs_set_radio(priv, preamble, 1); |
| 1782 |
if (ret) |
| 1783 |
goto out; |
| 1784 |
|
| 1785 |
/* |
| 1786 |
* Example CMD_802_11_AD_HOC_JOIN command: |
| 1787 |
* |
| 1788 |
* command 2c 00 CMD_802_11_AD_HOC_JOIN |
| 1789 |
* size 65 00 |
| 1790 |
* sequence xx xx |
| 1791 |
* result 00 00 |
| 1792 |
* bssid 02 27 27 97 2f 96 |
| 1793 |
* ssid 49 42 53 53 00 00 00 00 |
| 1794 |
* 00 00 00 00 00 00 00 00 |
| 1795 |
* 00 00 00 00 00 00 00 00 |
| 1796 |
* 00 00 00 00 00 00 00 00 |
| 1797 |
* type 02 CMD_BSS_TYPE_IBSS |
| 1798 |
* beacon period 64 00 |
| 1799 |
* dtim period 00 |
| 1800 |
* timestamp 00 00 00 00 00 00 00 00 |
| 1801 |
* localtime 00 00 00 00 00 00 00 00 |
| 1802 |
* IE DS 03 |
| 1803 |
* IE DS len 01 |
| 1804 |
* IE DS channel 01 |
| 1805 |
* reserveed 00 00 00 00 |
| 1806 |
* IE IBSS 06 |
| 1807 |
* IE IBSS len 02 |
| 1808 |
* IE IBSS atim 00 00 |
| 1809 |
* reserved 00 00 00 00 |
| 1810 |
* capability 02 00 |
| 1811 |
* rates 82 84 8b 96 0c 12 18 24 30 48 60 6c 00 |
| 1812 |
* fail timeout ff 00 |
| 1813 |
* probe delay 00 00 |
| 1814 |
*/ |
| 1815 |
memset(&cmd, 0, sizeof(cmd)); |
| 1816 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 1817 |
|
| 1818 |
memcpy(cmd.bss.bssid, bss->bssid, ETH_ALEN); |
| 1819 |
memcpy(cmd.bss.ssid, params->ssid, params->ssid_len); |
| 1820 |
cmd.bss.type = CMD_BSS_TYPE_IBSS; |
| 1821 |
cmd.bss.beaconperiod = cpu_to_le16(params->beacon_interval); |
| 1822 |
cmd.bss.ds.header.id = WLAN_EID_DS_PARAMS; |
| 1823 |
cmd.bss.ds.header.len = 1; |
| 1824 |
cmd.bss.ds.channel = params->chandef.chan->hw_value; |
| 1825 |
cmd.bss.ibss.header.id = WLAN_EID_IBSS_PARAMS; |
| 1826 |
cmd.bss.ibss.header.len = 2; |
| 1827 |
cmd.bss.ibss.atimwindow = 0; |
| 1828 |
cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); |
| 1829 |
|
| 1830 |
/* set rates to the intersection of our rates and the rates in the |
| 1831 |
bss */ |
| 1832 |
rcu_read_lock(); |
| 1833 |
rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES); |
| 1834 |
if (!rates_eid) { |
| 1835 |
lbs_add_rates(cmd.bss.rates); |
| 1836 |
} else { |
| 1837 |
rates_max = rates_eid[1]; |
| 1838 |
if (rates_max > MAX_RATES) { |
| 1839 |
lbs_deb_join("invalid rates"); |
| 1840 |
rcu_read_unlock(); |
| 1841 |
ret = -EINVAL; |
| 1842 |
goto out; |
| 1843 |
} |
| 1844 |
rates = cmd.bss.rates; |
| 1845 |
for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) { |
| 1846 |
u8 hw_rate = lbs_rates[hw].bitrate / 5; |
| 1847 |
for (i = 0; i < rates_max; i++) { |
| 1848 |
if (hw_rate == (rates_eid[i+2] & 0x7f)) { |
| 1849 |
u8 rate = rates_eid[i+2]; |
| 1850 |
if (rate == 0x02 || rate == 0x04 || |
| 1851 |
rate == 0x0b || rate == 0x16) |
| 1852 |
rate |= 0x80; |
| 1853 |
*rates++ = rate; |
| 1854 |
} |
| 1855 |
} |
| 1856 |
} |
| 1857 |
} |
| 1858 |
rcu_read_unlock(); |
| 1859 |
|
| 1860 |
/* Only v8 and below support setting this */ |
| 1861 |
if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) { |
| 1862 |
cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); |
| 1863 |
cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); |
| 1864 |
} |
| 1865 |
ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); |
| 1866 |
if (ret) |
| 1867 |
goto out; |
| 1868 |
|
| 1869 |
/* |
| 1870 |
* This is a sample response to CMD_802_11_AD_HOC_JOIN: |
| 1871 |
* |
| 1872 |
* response 2c 80 |
| 1873 |
* size 09 00 |
| 1874 |
* sequence xx xx |
| 1875 |
* result 00 00 |
| 1876 |
* reserved 00 |
| 1877 |
*/ |
| 1878 |
lbs_join_post(priv, params, bss->bssid, bss->capability); |
| 1879 |
|
| 1880 |
out: |
| 1881 |
return ret; |
| 1882 |
} |
| 1883 |
|
| 1884 |
|
| 1885 |
|
| 1886 |
static int lbs_ibss_start_new(struct lbs_private *priv, |
| 1887 |
struct cfg80211_ibss_params *params) |
| 1888 |
{ |
| 1889 |
struct cmd_ds_802_11_ad_hoc_start cmd; |
| 1890 |
struct cmd_ds_802_11_ad_hoc_result *resp = |
| 1891 |
(struct cmd_ds_802_11_ad_hoc_result *) &cmd; |
| 1892 |
u8 preamble = RADIO_PREAMBLE_SHORT; |
| 1893 |
int ret = 0; |
| 1894 |
u16 capability; |
| 1895 |
|
| 1896 |
ret = lbs_set_radio(priv, preamble, 1); |
| 1897 |
if (ret) |
| 1898 |
goto out; |
| 1899 |
|
| 1900 |
/* |
| 1901 |
* Example CMD_802_11_AD_HOC_START command: |
| 1902 |
* |
| 1903 |
* command 2b 00 CMD_802_11_AD_HOC_START |
| 1904 |
* size b1 00 |
| 1905 |
* sequence xx xx |
| 1906 |
* result 00 00 |
| 1907 |
* ssid 54 45 53 54 00 00 00 00 |
| 1908 |
* 00 00 00 00 00 00 00 00 |
| 1909 |
* 00 00 00 00 00 00 00 00 |
| 1910 |
* 00 00 00 00 00 00 00 00 |
| 1911 |
* bss type 02 |
| 1912 |
* beacon period 64 00 |
| 1913 |
* dtim period 00 |
| 1914 |
* IE IBSS 06 |
| 1915 |
* IE IBSS len 02 |
| 1916 |
* IE IBSS atim 00 00 |
| 1917 |
* reserved 00 00 00 00 |
| 1918 |
* IE DS 03 |
| 1919 |
* IE DS len 01 |
| 1920 |
* IE DS channel 01 |
| 1921 |
* reserved 00 00 00 00 |
| 1922 |
* probe delay 00 00 |
| 1923 |
* capability 02 00 |
| 1924 |
* rates 82 84 8b 96 (basic rates with have bit 7 set) |
| 1925 |
* 0c 12 18 24 30 48 60 6c |
| 1926 |
* padding 100 bytes |
| 1927 |
*/ |
| 1928 |
memset(&cmd, 0, sizeof(cmd)); |
| 1929 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 1930 |
memcpy(cmd.ssid, params->ssid, params->ssid_len); |
| 1931 |
cmd.bsstype = CMD_BSS_TYPE_IBSS; |
| 1932 |
cmd.beaconperiod = cpu_to_le16(params->beacon_interval); |
| 1933 |
cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; |
| 1934 |
cmd.ibss.header.len = 2; |
| 1935 |
cmd.ibss.atimwindow = 0; |
| 1936 |
cmd.ds.header.id = WLAN_EID_DS_PARAMS; |
| 1937 |
cmd.ds.header.len = 1; |
| 1938 |
cmd.ds.channel = params->chandef.chan->hw_value; |
| 1939 |
/* Only v8 and below support setting probe delay */ |
| 1940 |
if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) |
| 1941 |
cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); |
| 1942 |
/* TODO: mix in WLAN_CAPABILITY_PRIVACY */ |
| 1943 |
capability = WLAN_CAPABILITY_IBSS; |
| 1944 |
cmd.capability = cpu_to_le16(capability); |
| 1945 |
lbs_add_rates(cmd.rates); |
| 1946 |
|
| 1947 |
|
| 1948 |
ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); |
| 1949 |
if (ret) |
| 1950 |
goto out; |
| 1951 |
|
| 1952 |
/* |
| 1953 |
* This is a sample response to CMD_802_11_AD_HOC_JOIN: |
| 1954 |
* |
| 1955 |
* response 2b 80 |
| 1956 |
* size 14 00 |
| 1957 |
* sequence xx xx |
| 1958 |
* result 00 00 |
| 1959 |
* reserved 00 |
| 1960 |
* bssid 02 2b 7b 0f 86 0e |
| 1961 |
*/ |
| 1962 |
lbs_join_post(priv, params, resp->bssid, capability); |
| 1963 |
|
| 1964 |
out: |
| 1965 |
return ret; |
| 1966 |
} |
| 1967 |
|
| 1968 |
|
| 1969 |
static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, |
| 1970 |
struct cfg80211_ibss_params *params) |
| 1971 |
{ |
| 1972 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 1973 |
int ret = 0; |
| 1974 |
struct cfg80211_bss *bss; |
| 1975 |
|
| 1976 |
if (dev == priv->mesh_dev) |
| 1977 |
return -EOPNOTSUPP; |
| 1978 |
|
| 1979 |
if (!params->chandef.chan) { |
| 1980 |
ret = -ENOTSUPP; |
| 1981 |
goto out; |
| 1982 |
} |
| 1983 |
|
| 1984 |
ret = lbs_set_channel(priv, params->chandef.chan->hw_value); |
| 1985 |
if (ret) |
| 1986 |
goto out; |
| 1987 |
|
| 1988 |
/* Search if someone is beaconing. This assumes that the |
| 1989 |
* bss list is populated already */ |
| 1990 |
bss = cfg80211_get_bss(wiphy, params->chandef.chan, params->bssid, |
| 1991 |
params->ssid, params->ssid_len, |
| 1992 |
IEEE80211_BSS_TYPE_IBSS, IEEE80211_PRIVACY_ANY); |
| 1993 |
|
| 1994 |
if (bss) { |
| 1995 |
ret = lbs_ibss_join_existing(priv, params, bss); |
| 1996 |
cfg80211_put_bss(wiphy, bss); |
| 1997 |
} else |
| 1998 |
ret = lbs_ibss_start_new(priv, params); |
| 1999 |
|
| 2000 |
|
| 2001 |
out: |
| 2002 |
return ret; |
| 2003 |
} |
| 2004 |
|
| 2005 |
|
| 2006 |
static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev) |
| 2007 |
{ |
| 2008 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 2009 |
struct cmd_ds_802_11_ad_hoc_stop cmd; |
| 2010 |
int ret = 0; |
| 2011 |
|
| 2012 |
if (dev == priv->mesh_dev) |
| 2013 |
return -EOPNOTSUPP; |
| 2014 |
|
| 2015 |
memset(&cmd, 0, sizeof(cmd)); |
| 2016 |
cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| 2017 |
ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); |
| 2018 |
|
| 2019 |
/* TODO: consider doing this at MACREG_INT_CODE_ADHOC_BCN_LOST time */ |
| 2020 |
lbs_mac_event_disconnected(priv, true); |
| 2021 |
|
| 2022 |
return ret; |
| 2023 |
} |
| 2024 |
|
| 2025 |
|
| 2026 |
|
| 2027 |
static int lbs_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, |
| 2028 |
bool enabled, int timeout) |
| 2029 |
{ |
| 2030 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 2031 |
|
| 2032 |
if (!(priv->fwcapinfo & FW_CAPINFO_PS)) { |
| 2033 |
if (!enabled) |
| 2034 |
return 0; |
| 2035 |
else |
| 2036 |
return -EINVAL; |
| 2037 |
} |
| 2038 |
/* firmware does not work well with too long latency with power saving |
| 2039 |
* enabled, so do not enable it if there is only polling, no |
| 2040 |
* interrupts (like in some sdio hosts which can only |
| 2041 |
* poll for sdio irqs) |
| 2042 |
*/ |
| 2043 |
if (priv->is_polling) { |
| 2044 |
if (!enabled) |
| 2045 |
return 0; |
| 2046 |
else |
| 2047 |
return -EINVAL; |
| 2048 |
} |
| 2049 |
if (!enabled) { |
| 2050 |
priv->psmode = LBS802_11POWERMODECAM; |
| 2051 |
if (priv->psstate != PS_STATE_FULL_POWER) |
| 2052 |
lbs_set_ps_mode(priv, |
| 2053 |
PS_MODE_ACTION_EXIT_PS, |
| 2054 |
true); |
| 2055 |
return 0; |
| 2056 |
} |
| 2057 |
if (priv->psmode != LBS802_11POWERMODECAM) |
| 2058 |
return 0; |
| 2059 |
priv->psmode = LBS802_11POWERMODEMAX_PSP; |
| 2060 |
if (priv->connect_status == LBS_CONNECTED) |
| 2061 |
lbs_set_ps_mode(priv, PS_MODE_ACTION_ENTER_PS, true); |
| 2062 |
return 0; |
| 2063 |
} |
| 2064 |
|
| 2065 |
/* |
| 2066 |
* Initialization |
| 2067 |
*/ |
| 2068 |
|
| 2069 |
static const struct cfg80211_ops lbs_cfg80211_ops = { |
| 2070 |
.set_monitor_channel = lbs_cfg_set_monitor_channel, |
| 2071 |
.libertas_set_mesh_channel = lbs_cfg_set_mesh_channel, |
| 2072 |
.scan = lbs_cfg_scan, |
| 2073 |
.connect = lbs_cfg_connect, |
| 2074 |
.disconnect = lbs_cfg_disconnect, |
| 2075 |
.add_key = lbs_cfg_add_key, |
| 2076 |
.del_key = lbs_cfg_del_key, |
| 2077 |
.set_default_key = lbs_cfg_set_default_key, |
| 2078 |
.get_station = lbs_cfg_get_station, |
| 2079 |
.change_virtual_intf = lbs_change_intf, |
| 2080 |
.join_ibss = lbs_join_ibss, |
| 2081 |
.leave_ibss = lbs_leave_ibss, |
| 2082 |
.set_power_mgmt = lbs_set_power_mgmt, |
| 2083 |
}; |
| 2084 |
|
| 2085 |
|
| 2086 |
/* |
| 2087 |
* At this time lbs_private *priv doesn't even exist, so we just allocate |
| 2088 |
* memory and don't initialize the wiphy further. This is postponed until we |
| 2089 |
* can talk to the firmware and happens at registration time in |
| 2090 |
* lbs_cfg_wiphy_register(). |
| 2091 |
*/ |
| 2092 |
struct wireless_dev *lbs_cfg_alloc(struct device *dev) |
| 2093 |
{ |
| 2094 |
int ret = 0; |
| 2095 |
struct wireless_dev *wdev; |
| 2096 |
|
| 2097 |
wdev = kzalloc_obj(struct wireless_dev); |
| 2098 |
if (!wdev) |
| 2099 |
return ERR_PTR(-ENOMEM); |
| 2100 |
|
| 2101 |
wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private)); |
| 2102 |
if (!wdev->wiphy) { |
| 2103 |
dev_err(dev, "cannot allocate wiphy\n"); |
| 2104 |
ret = -ENOMEM; |
| 2105 |
goto err_wiphy_new; |
| 2106 |
} |
| 2107 |
|
| 2108 |
return wdev; |
| 2109 |
|
| 2110 |
err_wiphy_new: |
| 2111 |
kfree(wdev); |
| 2112 |
return ERR_PTR(ret); |
| 2113 |
} |
| 2114 |
|
| 2115 |
|
| 2116 |
static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) |
| 2117 |
{ |
| 2118 |
struct region_code_mapping { |
| 2119 |
const char *cn; |
| 2120 |
int code; |
| 2121 |
}; |
| 2122 |
|
| 2123 |
/* Section 5.17.2 */ |
| 2124 |
static const struct region_code_mapping regmap[] = { |
| 2125 |
{"US ", 0x10}, /* US FCC */ |
| 2126 |
{"CA ", 0x20}, /* Canada */ |
| 2127 |
{"EU ", 0x30}, /* ETSI */ |
| 2128 |
{"ES ", 0x31}, /* Spain */ |
| 2129 |
{"FR ", 0x32}, /* France */ |
| 2130 |
{"JP ", 0x40}, /* Japan */ |
| 2131 |
}; |
| 2132 |
size_t i; |
| 2133 |
|
| 2134 |
for (i = 0; i < ARRAY_SIZE(regmap); i++) |
| 2135 |
if (regmap[i].code == priv->regioncode) { |
| 2136 |
regulatory_hint(priv->wdev->wiphy, regmap[i].cn); |
| 2137 |
break; |
| 2138 |
} |
| 2139 |
} |
| 2140 |
|
| 2141 |
static void lbs_reg_notifier(struct wiphy *wiphy, |
| 2142 |
struct regulatory_request *request) |
| 2143 |
{ |
| 2144 |
struct lbs_private *priv = wiphy_priv(wiphy); |
| 2145 |
|
| 2146 |
memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2)); |
| 2147 |
if (lbs_iface_active(priv)) |
| 2148 |
lbs_set_11d_domain_info(priv); |
| 2149 |
} |
| 2150 |
|
| 2151 |
/* |
| 2152 |
* This function gets called after lbs_setup_firmware() determined the |
| 2153 |
* firmware capabilities. So we can setup the wiphy according to our |
| 2154 |
* hardware/firmware. |
| 2155 |
*/ |
| 2156 |
int lbs_cfg_register(struct lbs_private *priv) |
| 2157 |
{ |
| 2158 |
struct wireless_dev *wdev = priv->wdev; |
| 2159 |
int ret; |
| 2160 |
|
| 2161 |
wdev->wiphy->max_scan_ssids = 1; |
| 2162 |
wdev->wiphy->max_scan_ie_len = 256; |
| 2163 |
wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; |
| 2164 |
|
| 2165 |
wdev->wiphy->interface_modes = |
| 2166 |
BIT(NL80211_IFTYPE_STATION) | |
| 2167 |
BIT(NL80211_IFTYPE_ADHOC); |
| 2168 |
if (lbs_rtap_supported(priv)) |
| 2169 |
wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); |
| 2170 |
if (lbs_mesh_activated(priv)) |
| 2171 |
wdev->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MESH_POINT); |
| 2172 |
|
| 2173 |
wdev->wiphy->bands[NL80211_BAND_2GHZ] = &lbs_band_2ghz; |
| 2174 |
|
| 2175 |
/* |
| 2176 |
* We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have |
| 2177 |
* never seen a firmware without WPA |
| 2178 |
*/ |
| 2179 |
wdev->wiphy->cipher_suites = cipher_suites; |
| 2180 |
wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); |
| 2181 |
wdev->wiphy->reg_notifier = lbs_reg_notifier; |
| 2182 |
|
| 2183 |
ret = wiphy_register(wdev->wiphy); |
| 2184 |
if (ret < 0) |
| 2185 |
pr_err("cannot register wiphy device\n"); |
| 2186 |
|
| 2187 |
priv->wiphy_registered = true; |
| 2188 |
|
| 2189 |
ret = register_netdev(priv->dev); |
| 2190 |
if (ret) |
| 2191 |
pr_err("cannot register network device\n"); |
| 2192 |
|
| 2193 |
INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); |
| 2194 |
|
| 2195 |
lbs_cfg_set_regulatory_hint(priv); |
| 2196 |
|
| 2197 |
return ret; |
| 2198 |
} |
| 2199 |
|
| 2200 |
void lbs_scan_deinit(struct lbs_private *priv) |
| 2201 |
{ |
| 2202 |
cancel_delayed_work_sync(&priv->scan_work); |
| 2203 |
} |
| 2204 |
|
| 2205 |
|
| 2206 |
void lbs_cfg_free(struct lbs_private *priv) |
| 2207 |
{ |
| 2208 |
struct wireless_dev *wdev = priv->wdev; |
| 2209 |
|
| 2210 |
if (!wdev) |
| 2211 |
return; |
| 2212 |
|
| 2213 |
if (priv->wiphy_registered) |
| 2214 |
wiphy_unregister(wdev->wiphy); |
| 2215 |
|
| 2216 |
if (wdev->wiphy) |
| 2217 |
wiphy_free(wdev->wiphy); |
| 2218 |
|
| 2219 |
kfree(wdev); |
| 2220 |
} |