| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
|
| 3 |
/* |
| 4 |
* Linux device driver for USB based Prism54 |
| 5 |
* |
| 6 |
* Copyright (c) 2006, Michael Wu <[email protected]> |
| 7 |
* |
| 8 |
* Based on the islsm (softmac prism54) driver, which is: |
| 9 |
* Copyright 2004-2006 Jean-Baptiste Note <[email protected]>, et al. |
| 10 |
*/ |
| 11 |
|
| 12 |
#include <linux/usb.h> |
| 13 |
#include <linux/pci.h> |
| 14 |
#include <linux/slab.h> |
| 15 |
#include <linux/firmware.h> |
| 16 |
#include <linux/etherdevice.h> |
| 17 |
#include <linux/delay.h> |
| 18 |
#include <linux/crc32.h> |
| 19 |
#include <linux/module.h> |
| 20 |
#include <net/mac80211.h> |
| 21 |
|
| 22 |
#include "p54.h" |
| 23 |
#include "lmac.h" |
| 24 |
#include "p54usb.h" |
| 25 |
|
| 26 |
MODULE_AUTHOR("Michael Wu <[email protected]>"); |
| 27 |
MODULE_DESCRIPTION("Prism54 USB wireless driver"); |
| 28 |
MODULE_LICENSE("GPL"); |
| 29 |
MODULE_ALIAS("prism54usb"); |
| 30 |
MODULE_FIRMWARE("isl3886usb"); |
| 31 |
MODULE_FIRMWARE("isl3887usb"); |
| 32 |
|
| 33 |
static struct usb_driver p54u_driver; |
| 34 |
|
| 35 |
/* |
| 36 |
* Note: |
| 37 |
* |
| 38 |
* Always update our wiki's device list (located at: |
| 39 |
* http://wireless.wiki.kernel.org/en/users/Drivers/p54/devices ), |
| 40 |
* whenever you add a new device. |
| 41 |
*/ |
| 42 |
|
| 43 |
static const struct usb_device_id p54u_table[] = { |
| 44 |
/* Version 1 devices (pci chip + net2280) */ |
| 45 |
{USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ |
| 46 |
{USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ |
| 47 |
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ |
| 48 |
{USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */ |
| 49 |
{USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */ |
| 50 |
{USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */ |
| 51 |
{USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */ |
| 52 |
{USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */ |
| 53 |
{USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */ |
| 54 |
{USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */ |
| 55 |
{USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */ |
| 56 |
{USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */ |
| 57 |
{USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ |
| 58 |
{USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ |
| 59 |
{USB_DEVICE(0x0bf8, 0x1007)}, /* Fujitsu E-5400 USB */ |
| 60 |
{USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ |
| 61 |
{USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */ |
| 62 |
{USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */ |
| 63 |
{USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ |
| 64 |
{USB_DEVICE(0x124a, 0x4026)}, /* AirVasT USB wireless device */ |
| 65 |
{USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */ |
| 66 |
{USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */ |
| 67 |
{USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */ |
| 68 |
{USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */ |
| 69 |
{USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ |
| 70 |
{USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ |
| 71 |
{USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ |
| 72 |
{USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */ |
| 73 |
{USB_DEVICE(0x2001, 0x3762)}, /* Conceptronic C54U */ |
| 74 |
{USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */ |
| 75 |
{USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ |
| 76 |
|
| 77 |
/* Version 2 devices (3887) */ |
| 78 |
{USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */ |
| 79 |
{USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ |
| 80 |
{USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ |
| 81 |
{USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ |
| 82 |
{USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */ |
| 83 |
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ |
| 84 |
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ |
| 85 |
{USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */ |
| 86 |
{USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ |
| 87 |
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ |
| 88 |
{USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ |
| 89 |
{USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */ |
| 90 |
{USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */ |
| 91 |
{USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ |
| 92 |
{USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */ |
| 93 |
{USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */ |
| 94 |
{USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/ |
| 95 |
{USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ |
| 96 |
/* {USB_DEVICE(0x0cde, 0x0006)}, * Medion MD40900 already listed above, |
| 97 |
* just noting it here for clarity */ |
| 98 |
{USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ |
| 99 |
{USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */ |
| 100 |
{USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ |
| 101 |
{USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ |
| 102 |
{USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */ |
| 103 |
{USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ |
| 104 |
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ |
| 105 |
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ |
| 106 |
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ |
| 107 |
/* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */ |
| 108 |
{USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */ |
| 109 |
{USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */ |
| 110 |
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ |
| 111 |
{USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */ |
| 112 |
{USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */ |
| 113 |
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ |
| 114 |
{USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ |
| 115 |
{} |
| 116 |
}; |
| 117 |
|
| 118 |
MODULE_DEVICE_TABLE(usb, p54u_table); |
| 119 |
|
| 120 |
static const struct { |
| 121 |
u32 intf; |
| 122 |
enum p54u_hw_type type; |
| 123 |
const char *fw; |
| 124 |
char hw[20]; |
| 125 |
} p54u_fwlist[__NUM_P54U_HWTYPES] = { |
| 126 |
{ |
| 127 |
.type = P54U_NET2280, |
| 128 |
.intf = FW_LM86, |
| 129 |
.fw = "isl3886usb", |
| 130 |
.hw = "ISL3886 + net2280", |
| 131 |
}, |
| 132 |
{ |
| 133 |
.type = P54U_3887, |
| 134 |
.intf = FW_LM87, |
| 135 |
.fw = "isl3887usb", |
| 136 |
.hw = "ISL3887", |
| 137 |
}, |
| 138 |
}; |
| 139 |
|
| 140 |
static void p54u_rx_cb(struct urb *urb) |
| 141 |
{ |
| 142 |
struct sk_buff *skb = (struct sk_buff *) urb->context; |
| 143 |
struct p54u_rx_info *info = (struct p54u_rx_info *)skb->cb; |
| 144 |
struct ieee80211_hw *dev = info->dev; |
| 145 |
struct p54u_priv *priv = dev->priv; |
| 146 |
|
| 147 |
skb_unlink(skb, &priv->rx_queue); |
| 148 |
|
| 149 |
if (unlikely(urb->status)) { |
| 150 |
dev_kfree_skb_irq(skb); |
| 151 |
return; |
| 152 |
} |
| 153 |
|
| 154 |
skb_put(skb, urb->actual_length); |
| 155 |
|
| 156 |
if (priv->hw_type == P54U_NET2280) |
| 157 |
skb_pull(skb, priv->common.tx_hdr_len); |
| 158 |
if (priv->common.fw_interface == FW_LM87) { |
| 159 |
skb_pull(skb, 4); |
| 160 |
skb_put(skb, 4); |
| 161 |
} |
| 162 |
|
| 163 |
if (p54_rx(dev, skb)) { |
| 164 |
skb = dev_alloc_skb(priv->common.rx_mtu + 32); |
| 165 |
if (unlikely(!skb)) { |
| 166 |
/* TODO check rx queue length and refill *somewhere* */ |
| 167 |
return; |
| 168 |
} |
| 169 |
|
| 170 |
info = (struct p54u_rx_info *) skb->cb; |
| 171 |
info->urb = urb; |
| 172 |
info->dev = dev; |
| 173 |
urb->transfer_buffer = skb_tail_pointer(skb); |
| 174 |
urb->context = skb; |
| 175 |
} else { |
| 176 |
if (priv->hw_type == P54U_NET2280) |
| 177 |
skb_push(skb, priv->common.tx_hdr_len); |
| 178 |
if (priv->common.fw_interface == FW_LM87) { |
| 179 |
skb_push(skb, 4); |
| 180 |
skb_put(skb, 4); |
| 181 |
} |
| 182 |
skb_reset_tail_pointer(skb); |
| 183 |
skb_trim(skb, 0); |
| 184 |
urb->transfer_buffer = skb_tail_pointer(skb); |
| 185 |
} |
| 186 |
skb_queue_tail(&priv->rx_queue, skb); |
| 187 |
usb_anchor_urb(urb, &priv->submitted); |
| 188 |
if (usb_submit_urb(urb, GFP_ATOMIC)) { |
| 189 |
skb_unlink(skb, &priv->rx_queue); |
| 190 |
usb_unanchor_urb(urb); |
| 191 |
dev_kfree_skb_irq(skb); |
| 192 |
} |
| 193 |
} |
| 194 |
|
| 195 |
static void p54u_tx_cb(struct urb *urb) |
| 196 |
{ |
| 197 |
struct sk_buff *skb = urb->context; |
| 198 |
struct ieee80211_hw *dev = |
| 199 |
usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); |
| 200 |
|
| 201 |
p54_free_skb(dev, skb); |
| 202 |
} |
| 203 |
|
| 204 |
static void p54u_tx_dummy_cb(struct urb *urb) { } |
| 205 |
|
| 206 |
static void p54u_free_urbs(struct ieee80211_hw *dev) |
| 207 |
{ |
| 208 |
struct p54u_priv *priv = dev->priv; |
| 209 |
usb_kill_anchored_urbs(&priv->submitted); |
| 210 |
} |
| 211 |
|
| 212 |
static void p54u_stop(struct ieee80211_hw *dev) |
| 213 |
{ |
| 214 |
/* |
| 215 |
* TODO: figure out how to reliably stop the 3887 and net2280 so |
| 216 |
* the hardware is still usable next time we want to start it. |
| 217 |
* until then, we just stop listening to the hardware.. |
| 218 |
*/ |
| 219 |
p54u_free_urbs(dev); |
| 220 |
} |
| 221 |
|
| 222 |
static int p54u_init_urbs(struct ieee80211_hw *dev) |
| 223 |
{ |
| 224 |
struct p54u_priv *priv = dev->priv; |
| 225 |
struct urb *entry = NULL; |
| 226 |
struct sk_buff *skb; |
| 227 |
struct p54u_rx_info *info; |
| 228 |
int ret = 0; |
| 229 |
|
| 230 |
while (skb_queue_len(&priv->rx_queue) < 32) { |
| 231 |
skb = __dev_alloc_skb(priv->common.rx_mtu + 32, GFP_KERNEL); |
| 232 |
if (!skb) { |
| 233 |
ret = -ENOMEM; |
| 234 |
goto err; |
| 235 |
} |
| 236 |
entry = usb_alloc_urb(0, GFP_KERNEL); |
| 237 |
if (!entry) { |
| 238 |
ret = -ENOMEM; |
| 239 |
goto err; |
| 240 |
} |
| 241 |
|
| 242 |
usb_fill_bulk_urb(entry, priv->udev, |
| 243 |
usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), |
| 244 |
skb_tail_pointer(skb), |
| 245 |
priv->common.rx_mtu + 32, p54u_rx_cb, skb); |
| 246 |
info = (struct p54u_rx_info *) skb->cb; |
| 247 |
info->urb = entry; |
| 248 |
info->dev = dev; |
| 249 |
skb_queue_tail(&priv->rx_queue, skb); |
| 250 |
|
| 251 |
usb_anchor_urb(entry, &priv->submitted); |
| 252 |
ret = usb_submit_urb(entry, GFP_KERNEL); |
| 253 |
if (ret) { |
| 254 |
skb_unlink(skb, &priv->rx_queue); |
| 255 |
usb_unanchor_urb(entry); |
| 256 |
goto err; |
| 257 |
} |
| 258 |
usb_free_urb(entry); |
| 259 |
entry = NULL; |
| 260 |
} |
| 261 |
|
| 262 |
return 0; |
| 263 |
|
| 264 |
err: |
| 265 |
usb_free_urb(entry); |
| 266 |
kfree_skb(skb); |
| 267 |
p54u_free_urbs(dev); |
| 268 |
return ret; |
| 269 |
} |
| 270 |
|
| 271 |
static int p54u_open(struct ieee80211_hw *dev) |
| 272 |
{ |
| 273 |
/* |
| 274 |
* TODO: Because we don't know how to reliably stop the 3887 and |
| 275 |
* the isl3886+net2280, other than brutally cut off all |
| 276 |
* communications. We have to reinitialize the urbs on every start. |
| 277 |
*/ |
| 278 |
return p54u_init_urbs(dev); |
| 279 |
} |
| 280 |
|
| 281 |
static __le32 p54u_lm87_chksum(const __le32 *data, size_t length) |
| 282 |
{ |
| 283 |
u32 chk = 0; |
| 284 |
|
| 285 |
length >>= 2; |
| 286 |
while (length--) { |
| 287 |
chk ^= le32_to_cpu(*data++); |
| 288 |
chk = (chk >> 5) ^ (chk << 3); |
| 289 |
} |
| 290 |
|
| 291 |
return cpu_to_le32(chk); |
| 292 |
} |
| 293 |
|
| 294 |
static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb) |
| 295 |
{ |
| 296 |
struct p54u_priv *priv = dev->priv; |
| 297 |
struct urb *data_urb; |
| 298 |
struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); |
| 299 |
|
| 300 |
data_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 301 |
if (!data_urb) { |
| 302 |
p54_free_skb(dev, skb); |
| 303 |
return; |
| 304 |
} |
| 305 |
|
| 306 |
hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); |
| 307 |
hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id; |
| 308 |
|
| 309 |
usb_fill_bulk_urb(data_urb, priv->udev, |
| 310 |
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), |
| 311 |
hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? |
| 312 |
p54u_tx_cb : p54u_tx_dummy_cb, skb); |
| 313 |
data_urb->transfer_flags |= URB_ZERO_PACKET; |
| 314 |
|
| 315 |
usb_anchor_urb(data_urb, &priv->submitted); |
| 316 |
if (usb_submit_urb(data_urb, GFP_ATOMIC)) { |
| 317 |
usb_unanchor_urb(data_urb); |
| 318 |
p54_free_skb(dev, skb); |
| 319 |
} |
| 320 |
usb_free_urb(data_urb); |
| 321 |
} |
| 322 |
|
| 323 |
static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) |
| 324 |
{ |
| 325 |
struct p54u_priv *priv = dev->priv; |
| 326 |
struct urb *int_urb = NULL, *data_urb = NULL; |
| 327 |
struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); |
| 328 |
struct net2280_reg_write *reg = NULL; |
| 329 |
int err = -ENOMEM; |
| 330 |
|
| 331 |
reg = kmalloc_obj(*reg, GFP_ATOMIC); |
| 332 |
if (!reg) |
| 333 |
goto out; |
| 334 |
|
| 335 |
int_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 336 |
if (!int_urb) |
| 337 |
goto out; |
| 338 |
|
| 339 |
data_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 340 |
if (!data_urb) |
| 341 |
goto out; |
| 342 |
|
| 343 |
reg->port = cpu_to_le16(NET2280_DEV_U32); |
| 344 |
reg->addr = cpu_to_le32(P54U_DEV_BASE); |
| 345 |
reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); |
| 346 |
|
| 347 |
memset(hdr, 0, sizeof(*hdr)); |
| 348 |
hdr->len = cpu_to_le16(skb->len); |
| 349 |
hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id; |
| 350 |
|
| 351 |
usb_fill_bulk_urb(int_urb, priv->udev, |
| 352 |
usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), |
| 353 |
p54u_tx_dummy_cb, dev); |
| 354 |
|
| 355 |
/* |
| 356 |
* URB_FREE_BUFFER triggers a code path in the USB subsystem that will |
| 357 |
* free what is inside the transfer_buffer after the last reference to |
| 358 |
* the int_urb is dropped. |
| 359 |
*/ |
| 360 |
int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET; |
| 361 |
reg = NULL; |
| 362 |
|
| 363 |
usb_fill_bulk_urb(data_urb, priv->udev, |
| 364 |
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), |
| 365 |
hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? |
| 366 |
p54u_tx_cb : p54u_tx_dummy_cb, skb); |
| 367 |
data_urb->transfer_flags |= URB_ZERO_PACKET; |
| 368 |
|
| 369 |
usb_anchor_urb(int_urb, &priv->submitted); |
| 370 |
err = usb_submit_urb(int_urb, GFP_ATOMIC); |
| 371 |
if (err) { |
| 372 |
usb_unanchor_urb(int_urb); |
| 373 |
goto out; |
| 374 |
} |
| 375 |
|
| 376 |
usb_anchor_urb(data_urb, &priv->submitted); |
| 377 |
err = usb_submit_urb(data_urb, GFP_ATOMIC); |
| 378 |
if (err) { |
| 379 |
usb_unanchor_urb(data_urb); |
| 380 |
goto out; |
| 381 |
} |
| 382 |
out: |
| 383 |
usb_free_urb(int_urb); |
| 384 |
usb_free_urb(data_urb); |
| 385 |
|
| 386 |
if (err) { |
| 387 |
kfree(reg); |
| 388 |
p54_free_skb(dev, skb); |
| 389 |
} |
| 390 |
} |
| 391 |
|
| 392 |
static int p54u_write(struct p54u_priv *priv, |
| 393 |
struct net2280_reg_write *buf, |
| 394 |
enum net2280_op_type type, |
| 395 |
__le32 addr, __le32 val) |
| 396 |
{ |
| 397 |
unsigned int ep; |
| 398 |
int alen; |
| 399 |
|
| 400 |
if (type & 0x0800) |
| 401 |
ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV); |
| 402 |
else |
| 403 |
ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_BRG); |
| 404 |
|
| 405 |
buf->port = cpu_to_le16(type); |
| 406 |
buf->addr = addr; |
| 407 |
buf->val = val; |
| 408 |
|
| 409 |
return usb_bulk_msg(priv->udev, ep, buf, sizeof(*buf), &alen, 1000); |
| 410 |
} |
| 411 |
|
| 412 |
static int p54u_read(struct p54u_priv *priv, void *buf, |
| 413 |
enum net2280_op_type type, |
| 414 |
__le32 addr, __le32 *val) |
| 415 |
{ |
| 416 |
struct net2280_reg_read *read = buf; |
| 417 |
__le32 *reg = buf; |
| 418 |
unsigned int ep; |
| 419 |
int alen, err; |
| 420 |
|
| 421 |
if (type & 0x0800) |
| 422 |
ep = P54U_PIPE_DEV; |
| 423 |
else |
| 424 |
ep = P54U_PIPE_BRG; |
| 425 |
|
| 426 |
read->port = cpu_to_le16(type); |
| 427 |
read->addr = addr; |
| 428 |
|
| 429 |
err = usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), |
| 430 |
read, sizeof(*read), &alen, 1000); |
| 431 |
if (err) |
| 432 |
return err; |
| 433 |
|
| 434 |
err = usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, ep), |
| 435 |
reg, sizeof(*reg), &alen, 1000); |
| 436 |
if (err) |
| 437 |
return err; |
| 438 |
|
| 439 |
*val = *reg; |
| 440 |
return 0; |
| 441 |
} |
| 442 |
|
| 443 |
static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, |
| 444 |
void *data, size_t len) |
| 445 |
{ |
| 446 |
int alen; |
| 447 |
return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), |
| 448 |
data, len, &alen, 2000); |
| 449 |
} |
| 450 |
|
| 451 |
static int p54u_device_reset(struct ieee80211_hw *dev) |
| 452 |
{ |
| 453 |
struct p54u_priv *priv = dev->priv; |
| 454 |
int ret, lock = (priv->intf->condition != USB_INTERFACE_BINDING); |
| 455 |
|
| 456 |
if (lock) { |
| 457 |
ret = usb_lock_device_for_reset(priv->udev, priv->intf); |
| 458 |
if (ret < 0) { |
| 459 |
dev_err(&priv->udev->dev, "(p54usb) unable to lock " |
| 460 |
"device for reset (%d)!\n", ret); |
| 461 |
return ret; |
| 462 |
} |
| 463 |
} |
| 464 |
|
| 465 |
ret = usb_reset_device(priv->udev); |
| 466 |
if (lock) |
| 467 |
usb_unlock_device(priv->udev); |
| 468 |
|
| 469 |
if (ret) |
| 470 |
dev_err(&priv->udev->dev, "(p54usb) unable to reset " |
| 471 |
"device (%d)!\n", ret); |
| 472 |
|
| 473 |
return ret; |
| 474 |
} |
| 475 |
|
| 476 |
static const char p54u_romboot_3887[] = "~~~~"; |
| 477 |
static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) |
| 478 |
{ |
| 479 |
struct p54u_priv *priv = dev->priv; |
| 480 |
u8 *buf; |
| 481 |
int ret; |
| 482 |
|
| 483 |
buf = kmemdup(p54u_romboot_3887, 4, GFP_KERNEL); |
| 484 |
if (!buf) |
| 485 |
return -ENOMEM; |
| 486 |
ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, |
| 487 |
buf, 4); |
| 488 |
kfree(buf); |
| 489 |
if (ret) |
| 490 |
dev_err(&priv->udev->dev, "(p54usb) unable to jump to " |
| 491 |
"boot ROM (%d)!\n", ret); |
| 492 |
|
| 493 |
return ret; |
| 494 |
} |
| 495 |
|
| 496 |
static const char p54u_firmware_upload_3887[] = "<\r"; |
| 497 |
static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) |
| 498 |
{ |
| 499 |
struct p54u_priv *priv = dev->priv; |
| 500 |
int err, alen; |
| 501 |
u8 carry = 0; |
| 502 |
u8 *buf, *tmp; |
| 503 |
const u8 *data; |
| 504 |
unsigned int left, remains, block_size; |
| 505 |
struct x2_header *hdr; |
| 506 |
unsigned long timeout; |
| 507 |
|
| 508 |
err = p54u_firmware_reset_3887(dev); |
| 509 |
if (err) |
| 510 |
return err; |
| 511 |
|
| 512 |
tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); |
| 513 |
if (!buf) |
| 514 |
return -ENOMEM; |
| 515 |
|
| 516 |
left = block_size = min_t(size_t, P54U_FW_BLOCK, priv->fw->size); |
| 517 |
strcpy(buf, p54u_firmware_upload_3887); |
| 518 |
left -= strlen(p54u_firmware_upload_3887); |
| 519 |
tmp += strlen(p54u_firmware_upload_3887); |
| 520 |
|
| 521 |
data = priv->fw->data; |
| 522 |
remains = priv->fw->size; |
| 523 |
|
| 524 |
hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887)); |
| 525 |
memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE); |
| 526 |
hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR); |
| 527 |
hdr->fw_length = cpu_to_le32(priv->fw->size); |
| 528 |
hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr, |
| 529 |
sizeof(u32)*2)); |
| 530 |
left -= sizeof(*hdr); |
| 531 |
tmp += sizeof(*hdr); |
| 532 |
|
| 533 |
while (remains) { |
| 534 |
while (left--) { |
| 535 |
if (carry) { |
| 536 |
*tmp++ = carry; |
| 537 |
carry = 0; |
| 538 |
remains--; |
| 539 |
continue; |
| 540 |
} |
| 541 |
switch (*data) { |
| 542 |
case '~': |
| 543 |
*tmp++ = '}'; |
| 544 |
carry = '^'; |
| 545 |
break; |
| 546 |
case '}': |
| 547 |
*tmp++ = '}'; |
| 548 |
carry = ']'; |
| 549 |
break; |
| 550 |
default: |
| 551 |
*tmp++ = *data; |
| 552 |
remains--; |
| 553 |
break; |
| 554 |
} |
| 555 |
data++; |
| 556 |
} |
| 557 |
|
| 558 |
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); |
| 559 |
if (err) { |
| 560 |
dev_err(&priv->udev->dev, "(p54usb) firmware " |
| 561 |
"upload failed!\n"); |
| 562 |
goto err_upload_failed; |
| 563 |
} |
| 564 |
|
| 565 |
tmp = buf; |
| 566 |
left = block_size = min((unsigned int)P54U_FW_BLOCK, remains); |
| 567 |
} |
| 568 |
|
| 569 |
*((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, priv->fw->data, |
| 570 |
priv->fw->size)); |
| 571 |
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); |
| 572 |
if (err) { |
| 573 |
dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n"); |
| 574 |
goto err_upload_failed; |
| 575 |
} |
| 576 |
timeout = jiffies + msecs_to_jiffies(1000); |
| 577 |
while (!(err = usb_bulk_msg(priv->udev, |
| 578 |
usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { |
| 579 |
if (alen > 2 && !memcmp(buf, "OK", 2)) |
| 580 |
break; |
| 581 |
|
| 582 |
if (alen > 5 && !memcmp(buf, "ERROR", 5)) { |
| 583 |
err = -EINVAL; |
| 584 |
break; |
| 585 |
} |
| 586 |
|
| 587 |
if (time_after(jiffies, timeout)) { |
| 588 |
dev_err(&priv->udev->dev, "(p54usb) firmware boot " |
| 589 |
"timed out!\n"); |
| 590 |
err = -ETIMEDOUT; |
| 591 |
break; |
| 592 |
} |
| 593 |
} |
| 594 |
if (err) { |
| 595 |
dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n"); |
| 596 |
goto err_upload_failed; |
| 597 |
} |
| 598 |
|
| 599 |
buf[0] = 'g'; |
| 600 |
buf[1] = '\r'; |
| 601 |
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); |
| 602 |
if (err) { |
| 603 |
dev_err(&priv->udev->dev, "(p54usb) firmware boot failed!\n"); |
| 604 |
goto err_upload_failed; |
| 605 |
} |
| 606 |
|
| 607 |
timeout = jiffies + msecs_to_jiffies(1000); |
| 608 |
while (!(err = usb_bulk_msg(priv->udev, |
| 609 |
usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { |
| 610 |
if (alen > 0 && buf[0] == 'g') |
| 611 |
break; |
| 612 |
|
| 613 |
if (time_after(jiffies, timeout)) { |
| 614 |
err = -ETIMEDOUT; |
| 615 |
break; |
| 616 |
} |
| 617 |
} |
| 618 |
if (err) |
| 619 |
goto err_upload_failed; |
| 620 |
|
| 621 |
err_upload_failed: |
| 622 |
kfree(buf); |
| 623 |
return err; |
| 624 |
} |
| 625 |
|
| 626 |
static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) |
| 627 |
{ |
| 628 |
struct p54u_priv *priv = dev->priv; |
| 629 |
const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE; |
| 630 |
int err, alen; |
| 631 |
void *buf; |
| 632 |
__le32 reg; |
| 633 |
unsigned int remains, offset; |
| 634 |
const u8 *data; |
| 635 |
|
| 636 |
buf = kmalloc(512, GFP_KERNEL); |
| 637 |
if (!buf) |
| 638 |
return -ENOMEM; |
| 639 |
|
| 640 |
#define P54U_WRITE(type, addr, data) \ |
| 641 |
do {\ |
| 642 |
err = p54u_write(priv, buf, type,\ |
| 643 |
cpu_to_le32((u32)(unsigned long)addr), data);\ |
| 644 |
if (err) \ |
| 645 |
goto fail;\ |
| 646 |
} while (0) |
| 647 |
|
| 648 |
#define P54U_READ(type, addr) \ |
| 649 |
do {\ |
| 650 |
err = p54u_read(priv, buf, type,\ |
| 651 |
cpu_to_le32((u32)(unsigned long)addr), ®);\ |
| 652 |
if (err)\ |
| 653 |
goto fail;\ |
| 654 |
} while (0) |
| 655 |
|
| 656 |
/* power down net2280 bridge */ |
| 657 |
P54U_READ(NET2280_BRG_U32, NET2280_GPIOCTL); |
| 658 |
reg |= cpu_to_le32(P54U_BRG_POWER_DOWN); |
| 659 |
reg &= cpu_to_le32(~P54U_BRG_POWER_UP); |
| 660 |
P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); |
| 661 |
|
| 662 |
mdelay(100); |
| 663 |
|
| 664 |
/* power up bridge */ |
| 665 |
reg |= cpu_to_le32(P54U_BRG_POWER_UP); |
| 666 |
reg &= cpu_to_le32(~P54U_BRG_POWER_DOWN); |
| 667 |
P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); |
| 668 |
|
| 669 |
mdelay(100); |
| 670 |
|
| 671 |
P54U_WRITE(NET2280_BRG_U32, NET2280_DEVINIT, |
| 672 |
cpu_to_le32(NET2280_CLK_30Mhz | |
| 673 |
NET2280_PCI_ENABLE | |
| 674 |
NET2280_PCI_SOFT_RESET)); |
| 675 |
|
| 676 |
mdelay(20); |
| 677 |
|
| 678 |
P54U_WRITE(NET2280_BRG_CFG_U16, PCI_COMMAND, |
| 679 |
cpu_to_le32(PCI_COMMAND_MEMORY | |
| 680 |
PCI_COMMAND_MASTER)); |
| 681 |
|
| 682 |
P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_0, |
| 683 |
cpu_to_le32(NET2280_BASE)); |
| 684 |
|
| 685 |
P54U_READ(NET2280_BRG_CFG_U16, PCI_STATUS); |
| 686 |
reg |= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT); |
| 687 |
P54U_WRITE(NET2280_BRG_CFG_U16, PCI_STATUS, reg); |
| 688 |
|
| 689 |
// TODO: we really need this? |
| 690 |
P54U_READ(NET2280_BRG_U32, NET2280_RELNUM); |
| 691 |
|
| 692 |
P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_RSP, |
| 693 |
cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); |
| 694 |
P54U_WRITE(NET2280_BRG_U32, NET2280_EPC_RSP, |
| 695 |
cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); |
| 696 |
|
| 697 |
P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_2, |
| 698 |
cpu_to_le32(NET2280_BASE2)); |
| 699 |
|
| 700 |
/* finally done setting up the bridge */ |
| 701 |
|
| 702 |
P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | PCI_COMMAND, |
| 703 |
cpu_to_le32(PCI_COMMAND_MEMORY | |
| 704 |
PCI_COMMAND_MASTER)); |
| 705 |
|
| 706 |
P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | 0x40 /* TRDY timeout */, 0); |
| 707 |
P54U_WRITE(NET2280_DEV_CFG_U32, 0x10000 | PCI_BASE_ADDRESS_0, |
| 708 |
cpu_to_le32(P54U_DEV_BASE)); |
| 709 |
|
| 710 |
P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); |
| 711 |
P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, |
| 712 |
cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); |
| 713 |
|
| 714 |
/* do romboot */ |
| 715 |
P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 0); |
| 716 |
|
| 717 |
P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); |
| 718 |
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 719 |
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); |
| 720 |
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); |
| 721 |
P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 722 |
|
| 723 |
mdelay(20); |
| 724 |
|
| 725 |
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); |
| 726 |
P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 727 |
|
| 728 |
mdelay(20); |
| 729 |
|
| 730 |
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 731 |
P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 732 |
|
| 733 |
mdelay(100); |
| 734 |
|
| 735 |
P54U_READ(NET2280_DEV_U32, &devreg->int_ident); |
| 736 |
P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); |
| 737 |
|
| 738 |
/* finally, we can upload firmware now! */ |
| 739 |
remains = priv->fw->size; |
| 740 |
data = priv->fw->data; |
| 741 |
offset = ISL38XX_DEV_FIRMWARE_ADDR; |
| 742 |
|
| 743 |
while (remains) { |
| 744 |
unsigned int block_len = min(remains, (unsigned int)512); |
| 745 |
memcpy(buf, data, block_len); |
| 746 |
|
| 747 |
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); |
| 748 |
if (err) { |
| 749 |
dev_err(&priv->udev->dev, "(p54usb) firmware block " |
| 750 |
"upload failed\n"); |
| 751 |
goto fail; |
| 752 |
} |
| 753 |
|
| 754 |
P54U_WRITE(NET2280_DEV_U32, &devreg->direct_mem_base, |
| 755 |
cpu_to_le32(0xc0000f00)); |
| 756 |
|
| 757 |
P54U_WRITE(NET2280_DEV_U32, |
| 758 |
0x0020 | (unsigned long)&devreg->direct_mem_win, 0); |
| 759 |
P54U_WRITE(NET2280_DEV_U32, |
| 760 |
0x0020 | (unsigned long)&devreg->direct_mem_win, |
| 761 |
cpu_to_le32(1)); |
| 762 |
|
| 763 |
P54U_WRITE(NET2280_DEV_U32, |
| 764 |
0x0024 | (unsigned long)&devreg->direct_mem_win, |
| 765 |
cpu_to_le32(block_len)); |
| 766 |
P54U_WRITE(NET2280_DEV_U32, |
| 767 |
0x0028 | (unsigned long)&devreg->direct_mem_win, |
| 768 |
cpu_to_le32(offset)); |
| 769 |
|
| 770 |
P54U_WRITE(NET2280_DEV_U32, &devreg->dma_addr, |
| 771 |
cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR)); |
| 772 |
P54U_WRITE(NET2280_DEV_U32, &devreg->dma_len, |
| 773 |
cpu_to_le32(block_len >> 2)); |
| 774 |
P54U_WRITE(NET2280_DEV_U32, &devreg->dma_ctrl, |
| 775 |
cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER)); |
| 776 |
|
| 777 |
mdelay(10); |
| 778 |
|
| 779 |
P54U_READ(NET2280_DEV_U32, |
| 780 |
0x002C | (unsigned long)&devreg->direct_mem_win); |
| 781 |
if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || |
| 782 |
!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { |
| 783 |
dev_err(&priv->udev->dev, "(p54usb) firmware DMA " |
| 784 |
"transfer failed\n"); |
| 785 |
goto fail; |
| 786 |
} |
| 787 |
|
| 788 |
P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_STAT, |
| 789 |
cpu_to_le32(NET2280_FIFO_FLUSH)); |
| 790 |
|
| 791 |
remains -= block_len; |
| 792 |
data += block_len; |
| 793 |
offset += block_len; |
| 794 |
} |
| 795 |
|
| 796 |
/* do ramboot */ |
| 797 |
P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); |
| 798 |
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 799 |
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); |
| 800 |
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); |
| 801 |
P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 802 |
|
| 803 |
mdelay(20); |
| 804 |
|
| 805 |
reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); |
| 806 |
P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 807 |
|
| 808 |
reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| 809 |
P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); |
| 810 |
|
| 811 |
mdelay(100); |
| 812 |
|
| 813 |
P54U_READ(NET2280_DEV_U32, &devreg->int_ident); |
| 814 |
P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); |
| 815 |
|
| 816 |
/* start up the firmware */ |
| 817 |
P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, |
| 818 |
cpu_to_le32(ISL38XX_INT_IDENT_INIT)); |
| 819 |
|
| 820 |
P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, |
| 821 |
cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); |
| 822 |
|
| 823 |
P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, |
| 824 |
cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE | |
| 825 |
NET2280_USB_INTERRUPT_ENABLE)); |
| 826 |
|
| 827 |
P54U_WRITE(NET2280_DEV_U32, &devreg->dev_int, |
| 828 |
cpu_to_le32(ISL38XX_DEV_INT_RESET)); |
| 829 |
|
| 830 |
err = usb_interrupt_msg(priv->udev, |
| 831 |
usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT), |
| 832 |
buf, sizeof(__le32), &alen, 1000); |
| 833 |
if (err || alen != sizeof(__le32)) |
| 834 |
goto fail; |
| 835 |
|
| 836 |
P54U_READ(NET2280_DEV_U32, &devreg->int_ident); |
| 837 |
P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); |
| 838 |
|
| 839 |
if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))) |
| 840 |
err = -EINVAL; |
| 841 |
|
| 842 |
P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); |
| 843 |
P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, |
| 844 |
cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); |
| 845 |
|
| 846 |
#undef P54U_WRITE |
| 847 |
#undef P54U_READ |
| 848 |
|
| 849 |
fail: |
| 850 |
kfree(buf); |
| 851 |
return err; |
| 852 |
} |
| 853 |
|
| 854 |
static int p54_find_type(struct p54u_priv *priv) |
| 855 |
{ |
| 856 |
int i; |
| 857 |
|
| 858 |
for (i = 0; i < __NUM_P54U_HWTYPES; i++) |
| 859 |
if (p54u_fwlist[i].type == priv->hw_type) |
| 860 |
break; |
| 861 |
if (i == __NUM_P54U_HWTYPES) |
| 862 |
return -EOPNOTSUPP; |
| 863 |
|
| 864 |
return i; |
| 865 |
} |
| 866 |
|
| 867 |
static int p54u_start_ops(struct p54u_priv *priv) |
| 868 |
{ |
| 869 |
struct ieee80211_hw *dev = priv->common.hw; |
| 870 |
int ret; |
| 871 |
|
| 872 |
ret = p54_parse_firmware(dev, priv->fw); |
| 873 |
if (ret) |
| 874 |
goto err_out; |
| 875 |
|
| 876 |
ret = p54_find_type(priv); |
| 877 |
if (ret < 0) |
| 878 |
goto err_out; |
| 879 |
|
| 880 |
if (priv->common.fw_interface != p54u_fwlist[ret].intf) { |
| 881 |
dev_err(&priv->udev->dev, "wrong firmware, please get " |
| 882 |
"a firmware for \"%s\" and try again.\n", |
| 883 |
p54u_fwlist[ret].hw); |
| 884 |
ret = -ENODEV; |
| 885 |
goto err_out; |
| 886 |
} |
| 887 |
|
| 888 |
ret = priv->upload_fw(dev); |
| 889 |
if (ret) |
| 890 |
goto err_out; |
| 891 |
|
| 892 |
ret = p54u_open(dev); |
| 893 |
if (ret) |
| 894 |
goto err_out; |
| 895 |
|
| 896 |
ret = p54_read_eeprom(dev); |
| 897 |
if (ret) |
| 898 |
goto err_stop; |
| 899 |
|
| 900 |
p54u_stop(dev); |
| 901 |
|
| 902 |
ret = p54_register_common(dev, &priv->udev->dev); |
| 903 |
if (ret) |
| 904 |
goto err_stop; |
| 905 |
|
| 906 |
return 0; |
| 907 |
|
| 908 |
err_stop: |
| 909 |
p54u_stop(dev); |
| 910 |
|
| 911 |
err_out: |
| 912 |
/* |
| 913 |
* p54u_disconnect will do the rest of the |
| 914 |
* cleanup |
| 915 |
*/ |
| 916 |
return ret; |
| 917 |
} |
| 918 |
|
| 919 |
static void p54u_load_firmware_cb(const struct firmware *firmware, |
| 920 |
void *context) |
| 921 |
{ |
| 922 |
struct p54u_priv *priv = context; |
| 923 |
struct usb_device *udev = priv->udev; |
| 924 |
struct usb_interface *intf = priv->intf; |
| 925 |
int err; |
| 926 |
|
| 927 |
if (firmware) { |
| 928 |
priv->fw = firmware; |
| 929 |
err = p54u_start_ops(priv); |
| 930 |
} else { |
| 931 |
err = -ENOENT; |
| 932 |
dev_err(&udev->dev, "Firmware not found.\n"); |
| 933 |
} |
| 934 |
|
| 935 |
complete(&priv->fw_wait_load); |
| 936 |
/* |
| 937 |
* At this point p54u_disconnect may have already freed |
| 938 |
* the "priv" context. Do not use it anymore! |
| 939 |
*/ |
| 940 |
priv = NULL; |
| 941 |
|
| 942 |
if (err) { |
| 943 |
dev_err(&intf->dev, "failed to initialize device (%d)\n", err); |
| 944 |
|
| 945 |
usb_lock_device(udev); |
| 946 |
usb_driver_release_interface(&p54u_driver, intf); |
| 947 |
usb_unlock_device(udev); |
| 948 |
} |
| 949 |
|
| 950 |
usb_put_intf(intf); |
| 951 |
} |
| 952 |
|
| 953 |
static int p54u_load_firmware(struct ieee80211_hw *dev, |
| 954 |
struct usb_interface *intf) |
| 955 |
{ |
| 956 |
struct usb_device *udev = interface_to_usbdev(intf); |
| 957 |
struct p54u_priv *priv = dev->priv; |
| 958 |
struct device *device = &udev->dev; |
| 959 |
int err, i; |
| 960 |
|
| 961 |
BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES); |
| 962 |
|
| 963 |
init_completion(&priv->fw_wait_load); |
| 964 |
i = p54_find_type(priv); |
| 965 |
if (i < 0) |
| 966 |
return i; |
| 967 |
|
| 968 |
dev_info(&priv->udev->dev, "Loading firmware file %s\n", |
| 969 |
p54u_fwlist[i].fw); |
| 970 |
|
| 971 |
usb_get_intf(intf); |
| 972 |
err = request_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw, |
| 973 |
device, GFP_KERNEL, priv, |
| 974 |
p54u_load_firmware_cb); |
| 975 |
if (err) { |
| 976 |
dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s " |
| 977 |
"(%d)!\n", p54u_fwlist[i].fw, err); |
| 978 |
usb_put_intf(intf); |
| 979 |
} |
| 980 |
|
| 981 |
return err; |
| 982 |
} |
| 983 |
|
| 984 |
static int p54u_probe(struct usb_interface *intf, |
| 985 |
const struct usb_device_id *id) |
| 986 |
{ |
| 987 |
struct usb_device *udev = interface_to_usbdev(intf); |
| 988 |
struct ieee80211_hw *dev; |
| 989 |
struct p54u_priv *priv; |
| 990 |
int err; |
| 991 |
unsigned int i, recognized_pipes; |
| 992 |
|
| 993 |
dev = p54_init_common(sizeof(*priv)); |
| 994 |
|
| 995 |
if (!dev) { |
| 996 |
dev_err(&udev->dev, "(p54usb) ieee80211 alloc failed\n"); |
| 997 |
return -ENOMEM; |
| 998 |
} |
| 999 |
|
| 1000 |
priv = dev->priv; |
| 1001 |
priv->hw_type = P54U_INVALID_HW; |
| 1002 |
|
| 1003 |
SET_IEEE80211_DEV(dev, &intf->dev); |
| 1004 |
usb_set_intfdata(intf, dev); |
| 1005 |
priv->udev = udev; |
| 1006 |
priv->intf = intf; |
| 1007 |
skb_queue_head_init(&priv->rx_queue); |
| 1008 |
init_usb_anchor(&priv->submitted); |
| 1009 |
|
| 1010 |
/* really lazy and simple way of figuring out if we're a 3887 */ |
| 1011 |
/* TODO: should just stick the identification in the device table */ |
| 1012 |
i = intf->altsetting->desc.bNumEndpoints; |
| 1013 |
recognized_pipes = 0; |
| 1014 |
while (i--) { |
| 1015 |
switch (intf->altsetting->endpoint[i].desc.bEndpointAddress) { |
| 1016 |
case P54U_PIPE_DATA: |
| 1017 |
case P54U_PIPE_MGMT: |
| 1018 |
case P54U_PIPE_BRG: |
| 1019 |
case P54U_PIPE_DEV: |
| 1020 |
case P54U_PIPE_DATA | USB_DIR_IN: |
| 1021 |
case P54U_PIPE_MGMT | USB_DIR_IN: |
| 1022 |
case P54U_PIPE_BRG | USB_DIR_IN: |
| 1023 |
case P54U_PIPE_DEV | USB_DIR_IN: |
| 1024 |
case P54U_PIPE_INT | USB_DIR_IN: |
| 1025 |
recognized_pipes++; |
| 1026 |
} |
| 1027 |
} |
| 1028 |
priv->common.open = p54u_open; |
| 1029 |
priv->common.stop = p54u_stop; |
| 1030 |
if (recognized_pipes < P54U_PIPE_NUMBER) { |
| 1031 |
#ifdef CONFIG_PM |
| 1032 |
/* ISL3887 needs a full reset on resume */ |
| 1033 |
udev->reset_resume = 1; |
| 1034 |
#endif /* CONFIG_PM */ |
| 1035 |
err = p54u_device_reset(dev); |
| 1036 |
|
| 1037 |
priv->hw_type = P54U_3887; |
| 1038 |
dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr); |
| 1039 |
priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr); |
| 1040 |
priv->common.tx = p54u_tx_lm87; |
| 1041 |
priv->upload_fw = p54u_upload_firmware_3887; |
| 1042 |
} else { |
| 1043 |
priv->hw_type = P54U_NET2280; |
| 1044 |
dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); |
| 1045 |
priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); |
| 1046 |
priv->common.tx = p54u_tx_net2280; |
| 1047 |
priv->upload_fw = p54u_upload_firmware_net2280; |
| 1048 |
} |
| 1049 |
err = p54u_load_firmware(dev, intf); |
| 1050 |
if (err) |
| 1051 |
p54_free_common(dev); |
| 1052 |
return err; |
| 1053 |
} |
| 1054 |
|
| 1055 |
static void p54u_disconnect(struct usb_interface *intf) |
| 1056 |
{ |
| 1057 |
struct ieee80211_hw *dev = usb_get_intfdata(intf); |
| 1058 |
struct p54u_priv *priv; |
| 1059 |
|
| 1060 |
if (!dev) |
| 1061 |
return; |
| 1062 |
|
| 1063 |
priv = dev->priv; |
| 1064 |
wait_for_completion(&priv->fw_wait_load); |
| 1065 |
p54_unregister_common(dev); |
| 1066 |
|
| 1067 |
release_firmware(priv->fw); |
| 1068 |
p54_free_common(dev); |
| 1069 |
} |
| 1070 |
|
| 1071 |
static int p54u_pre_reset(struct usb_interface *intf) |
| 1072 |
{ |
| 1073 |
struct ieee80211_hw *dev = usb_get_intfdata(intf); |
| 1074 |
|
| 1075 |
if (!dev) |
| 1076 |
return -ENODEV; |
| 1077 |
|
| 1078 |
p54u_stop(dev); |
| 1079 |
return 0; |
| 1080 |
} |
| 1081 |
|
| 1082 |
static int p54u_resume(struct usb_interface *intf) |
| 1083 |
{ |
| 1084 |
struct ieee80211_hw *dev = usb_get_intfdata(intf); |
| 1085 |
struct p54u_priv *priv; |
| 1086 |
|
| 1087 |
if (!dev) |
| 1088 |
return -ENODEV; |
| 1089 |
|
| 1090 |
priv = dev->priv; |
| 1091 |
if (unlikely(!(priv->upload_fw && priv->fw))) |
| 1092 |
return 0; |
| 1093 |
|
| 1094 |
return priv->upload_fw(dev); |
| 1095 |
} |
| 1096 |
|
| 1097 |
static int p54u_post_reset(struct usb_interface *intf) |
| 1098 |
{ |
| 1099 |
struct ieee80211_hw *dev = usb_get_intfdata(intf); |
| 1100 |
struct p54u_priv *priv; |
| 1101 |
int err; |
| 1102 |
|
| 1103 |
err = p54u_resume(intf); |
| 1104 |
if (err) |
| 1105 |
return err; |
| 1106 |
|
| 1107 |
/* reinitialize old device state */ |
| 1108 |
priv = dev->priv; |
| 1109 |
if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED) |
| 1110 |
ieee80211_restart_hw(dev); |
| 1111 |
|
| 1112 |
return 0; |
| 1113 |
} |
| 1114 |
|
| 1115 |
#ifdef CONFIG_PM |
| 1116 |
|
| 1117 |
static int p54u_suspend(struct usb_interface *intf, pm_message_t message) |
| 1118 |
{ |
| 1119 |
return p54u_pre_reset(intf); |
| 1120 |
} |
| 1121 |
|
| 1122 |
#endif /* CONFIG_PM */ |
| 1123 |
|
| 1124 |
static struct usb_driver p54u_driver = { |
| 1125 |
.name = "p54usb", |
| 1126 |
.id_table = p54u_table, |
| 1127 |
.probe = p54u_probe, |
| 1128 |
.disconnect = p54u_disconnect, |
| 1129 |
.pre_reset = p54u_pre_reset, |
| 1130 |
.post_reset = p54u_post_reset, |
| 1131 |
#ifdef CONFIG_PM |
| 1132 |
.suspend = p54u_suspend, |
| 1133 |
.resume = p54u_resume, |
| 1134 |
.reset_resume = p54u_resume, |
| 1135 |
#endif /* CONFIG_PM */ |
| 1136 |
.soft_unbind = 1, |
| 1137 |
.disable_hub_initiated_lpm = 1, |
| 1138 |
}; |
| 1139 |
|
| 1140 |
module_usb_driver(p54u_driver); |