| 1 |
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (C) 2024-2025 Intel Corporation |
| 4 |
*/ |
| 5 |
#include <linux/crc32.h> |
| 6 |
|
| 7 |
#include "iwl-utils.h" |
| 8 |
|
| 9 |
#include "mld.h" |
| 10 |
#include "scan.h" |
| 11 |
#include "hcmd.h" |
| 12 |
#include "iface.h" |
| 13 |
#include "phy.h" |
| 14 |
#include "mlo.h" |
| 15 |
|
| 16 |
#include "fw/api/scan.h" |
| 17 |
#include "fw/dbg.h" |
| 18 |
|
| 19 |
#define IWL_SCAN_DWELL_ACTIVE 10 |
| 20 |
#define IWL_SCAN_DWELL_PASSIVE 110 |
| 21 |
#define IWL_SCAN_NUM_OF_FRAGS 3 |
| 22 |
|
| 23 |
/* adaptive dwell max budget time [TU] for full scan */ |
| 24 |
#define IWL_SCAN_ADWELL_MAX_BUDGET_FULL_SCAN 300 |
| 25 |
|
| 26 |
/* adaptive dwell max budget time [TU] for directed scan */ |
| 27 |
#define IWL_SCAN_ADWELL_MAX_BUDGET_DIRECTED_SCAN 100 |
| 28 |
|
| 29 |
/* adaptive dwell default high band APs number */ |
| 30 |
#define IWL_SCAN_ADWELL_DEFAULT_HB_N_APS 8 |
| 31 |
|
| 32 |
/* adaptive dwell default low band APs number */ |
| 33 |
#define IWL_SCAN_ADWELL_DEFAULT_LB_N_APS 2 |
| 34 |
|
| 35 |
/* adaptive dwell default APs number for P2P social channels (1, 6, 11) */ |
| 36 |
#define IWL_SCAN_ADWELL_DEFAULT_N_APS_SOCIAL 10 |
| 37 |
|
| 38 |
/* adaptive dwell number of APs override for P2P friendly GO channels */ |
| 39 |
#define IWL_SCAN_ADWELL_N_APS_GO_FRIENDLY 10 |
| 40 |
|
| 41 |
/* adaptive dwell number of APs override for P2P social channels */ |
| 42 |
#define IWL_SCAN_ADWELL_N_APS_SOCIAL_CHS 2 |
| 43 |
|
| 44 |
/* adaptive dwell number of APs override mask for p2p friendly GO */ |
| 45 |
#define IWL_SCAN_ADWELL_N_APS_GO_FRIENDLY_BIT BIT(20) |
| 46 |
|
| 47 |
/* adaptive dwell number of APs override mask for social channels */ |
| 48 |
#define IWL_SCAN_ADWELL_N_APS_SOCIAL_CHS_BIT BIT(21) |
| 49 |
|
| 50 |
#define SCAN_TIMEOUT_MSEC (30000 * HZ) |
| 51 |
|
| 52 |
/* minimal number of 2GHz and 5GHz channels in the regular scan request */ |
| 53 |
#define IWL_MLD_6GHZ_PASSIVE_SCAN_MIN_CHANS 4 |
| 54 |
|
| 55 |
enum iwl_mld_scan_type { |
| 56 |
IWL_SCAN_TYPE_NOT_SET, |
| 57 |
IWL_SCAN_TYPE_UNASSOC, |
| 58 |
IWL_SCAN_TYPE_WILD, |
| 59 |
IWL_SCAN_TYPE_MILD, |
| 60 |
IWL_SCAN_TYPE_FRAGMENTED, |
| 61 |
IWL_SCAN_TYPE_FAST_BALANCE, |
| 62 |
}; |
| 63 |
|
| 64 |
struct iwl_mld_scan_timing_params { |
| 65 |
u32 suspend_time; |
| 66 |
u32 max_out_time; |
| 67 |
}; |
| 68 |
|
| 69 |
static const struct iwl_mld_scan_timing_params scan_timing[] = { |
| 70 |
[IWL_SCAN_TYPE_UNASSOC] = { |
| 71 |
.suspend_time = 0, |
| 72 |
.max_out_time = 0, |
| 73 |
}, |
| 74 |
[IWL_SCAN_TYPE_WILD] = { |
| 75 |
.suspend_time = 30, |
| 76 |
.max_out_time = 120, |
| 77 |
}, |
| 78 |
[IWL_SCAN_TYPE_MILD] = { |
| 79 |
.suspend_time = 120, |
| 80 |
.max_out_time = 120, |
| 81 |
}, |
| 82 |
[IWL_SCAN_TYPE_FRAGMENTED] = { |
| 83 |
.suspend_time = 95, |
| 84 |
.max_out_time = 44, |
| 85 |
}, |
| 86 |
[IWL_SCAN_TYPE_FAST_BALANCE] = { |
| 87 |
.suspend_time = 30, |
| 88 |
.max_out_time = 37, |
| 89 |
}, |
| 90 |
}; |
| 91 |
|
| 92 |
struct iwl_mld_scan_params { |
| 93 |
enum iwl_mld_scan_type type; |
| 94 |
u32 n_channels; |
| 95 |
u16 delay; |
| 96 |
int n_ssids; |
| 97 |
struct cfg80211_ssid *ssids; |
| 98 |
struct ieee80211_channel **channels; |
| 99 |
u32 flags; |
| 100 |
u8 *mac_addr; |
| 101 |
u8 *mac_addr_mask; |
| 102 |
bool no_cck; |
| 103 |
bool pass_all; |
| 104 |
int n_match_sets; |
| 105 |
struct iwl_scan_probe_req preq; |
| 106 |
struct cfg80211_match_set *match_sets; |
| 107 |
int n_scan_plans; |
| 108 |
struct cfg80211_sched_scan_plan *scan_plans; |
| 109 |
bool iter_notif; |
| 110 |
bool respect_p2p_go; |
| 111 |
u8 fw_link_id; |
| 112 |
struct cfg80211_scan_6ghz_params *scan_6ghz_params; |
| 113 |
u32 n_6ghz_params; |
| 114 |
bool scan_6ghz; |
| 115 |
bool enable_6ghz_passive; |
| 116 |
u8 bssid[ETH_ALEN] __aligned(2); |
| 117 |
}; |
| 118 |
|
| 119 |
struct iwl_mld_scan_respect_p2p_go_iter_data { |
| 120 |
struct ieee80211_vif *current_vif; |
| 121 |
bool p2p_go; |
| 122 |
}; |
| 123 |
|
| 124 |
static void iwl_mld_scan_respect_p2p_go_iter(void *_data, u8 *mac, |
| 125 |
struct ieee80211_vif *vif) |
| 126 |
{ |
| 127 |
struct iwl_mld_scan_respect_p2p_go_iter_data *data = _data; |
| 128 |
|
| 129 |
/* exclude the given vif */ |
| 130 |
if (vif == data->current_vif) |
| 131 |
return; |
| 132 |
|
| 133 |
/* TODO: CDB check the band of the GO */ |
| 134 |
if (ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_P2P_GO && |
| 135 |
iwl_mld_vif_from_mac80211(vif)->ap_ibss_active) |
| 136 |
data->p2p_go = true; |
| 137 |
} |
| 138 |
|
| 139 |
static bool iwl_mld_get_respect_p2p_go(struct iwl_mld *mld, |
| 140 |
struct ieee80211_vif *vif, |
| 141 |
bool low_latency) |
| 142 |
{ |
| 143 |
struct iwl_mld_scan_respect_p2p_go_iter_data data = { |
| 144 |
.current_vif = vif, |
| 145 |
.p2p_go = false, |
| 146 |
}; |
| 147 |
|
| 148 |
if (!low_latency) |
| 149 |
return false; |
| 150 |
|
| 151 |
ieee80211_iterate_active_interfaces_mtx(mld->hw, |
| 152 |
IEEE80211_IFACE_ITER_NORMAL, |
| 153 |
iwl_mld_scan_respect_p2p_go_iter, |
| 154 |
&data); |
| 155 |
|
| 156 |
return data.p2p_go; |
| 157 |
} |
| 158 |
|
| 159 |
struct iwl_mld_scan_iter_data { |
| 160 |
struct ieee80211_vif *current_vif; |
| 161 |
bool active_vif; |
| 162 |
bool is_dcm_with_p2p_go; |
| 163 |
bool global_low_latency; |
| 164 |
}; |
| 165 |
|
| 166 |
static void iwl_mld_scan_iterator(void *_data, u8 *mac, |
| 167 |
struct ieee80211_vif *vif) |
| 168 |
{ |
| 169 |
struct iwl_mld_scan_iter_data *data = _data; |
| 170 |
struct ieee80211_vif *curr_vif = data->current_vif; |
| 171 |
struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif); |
| 172 |
struct iwl_mld_vif *curr_mld_vif; |
| 173 |
unsigned long curr_vif_active_links; |
| 174 |
u16 link_id; |
| 175 |
|
| 176 |
data->global_low_latency |= iwl_mld_vif_low_latency(mld_vif); |
| 177 |
|
| 178 |
if ((ieee80211_vif_is_mld(vif) && vif->active_links) || |
| 179 |
(vif->type != NL80211_IFTYPE_P2P_DEVICE && |
| 180 |
mld_vif->deflink.active)) |
| 181 |
data->active_vif = true; |
| 182 |
|
| 183 |
if (vif == curr_vif) |
| 184 |
return; |
| 185 |
|
| 186 |
if (ieee80211_vif_type_p2p(vif) != NL80211_IFTYPE_P2P_GO) |
| 187 |
return; |
| 188 |
|
| 189 |
/* Currently P2P GO can't be AP MLD so the logic below assumes that */ |
| 190 |
WARN_ON_ONCE(ieee80211_vif_is_mld(vif)); |
| 191 |
|
| 192 |
curr_vif_active_links = |
| 193 |
ieee80211_vif_is_mld(curr_vif) ? curr_vif->active_links : 1; |
| 194 |
|
| 195 |
curr_mld_vif = iwl_mld_vif_from_mac80211(curr_vif); |
| 196 |
|
| 197 |
for_each_set_bit(link_id, &curr_vif_active_links, |
| 198 |
IEEE80211_MLD_MAX_NUM_LINKS) { |
| 199 |
struct iwl_mld_link *curr_mld_link = |
| 200 |
iwl_mld_link_dereference_check(curr_mld_vif, link_id); |
| 201 |
|
| 202 |
if (WARN_ON(!curr_mld_link)) |
| 203 |
return; |
| 204 |
|
| 205 |
if (rcu_access_pointer(curr_mld_link->chan_ctx) && |
| 206 |
rcu_access_pointer(mld_vif->deflink.chan_ctx) != |
| 207 |
rcu_access_pointer(curr_mld_link->chan_ctx)) { |
| 208 |
data->is_dcm_with_p2p_go = true; |
| 209 |
return; |
| 210 |
} |
| 211 |
} |
| 212 |
} |
| 213 |
|
| 214 |
static enum |
| 215 |
iwl_mld_scan_type iwl_mld_get_scan_type(struct iwl_mld *mld, |
| 216 |
struct ieee80211_vif *vif, |
| 217 |
struct iwl_mld_scan_iter_data *data) |
| 218 |
{ |
| 219 |
enum iwl_mld_traffic_load load = mld->scan.traffic_load.status; |
| 220 |
|
| 221 |
/* A scanning AP interface probably wants to generate a survey to do |
| 222 |
* ACS (automatic channel selection). |
| 223 |
* Force a non-fragmented scan in that case. |
| 224 |
*/ |
| 225 |
if (ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_AP) |
| 226 |
return IWL_SCAN_TYPE_WILD; |
| 227 |
|
| 228 |
if (!data->active_vif) |
| 229 |
return IWL_SCAN_TYPE_UNASSOC; |
| 230 |
|
| 231 |
if ((load == IWL_MLD_TRAFFIC_HIGH || data->global_low_latency) && |
| 232 |
vif->type != NL80211_IFTYPE_P2P_DEVICE) |
| 233 |
return IWL_SCAN_TYPE_FRAGMENTED; |
| 234 |
|
| 235 |
/* In case of DCM with P2P GO set all scan requests as |
| 236 |
* fast-balance scan |
| 237 |
*/ |
| 238 |
if (vif->type == NL80211_IFTYPE_STATION && |
| 239 |
data->is_dcm_with_p2p_go) |
| 240 |
return IWL_SCAN_TYPE_FAST_BALANCE; |
| 241 |
|
| 242 |
if (load >= IWL_MLD_TRAFFIC_MEDIUM || data->global_low_latency) |
| 243 |
return IWL_SCAN_TYPE_MILD; |
| 244 |
|
| 245 |
return IWL_SCAN_TYPE_WILD; |
| 246 |
} |
| 247 |
|
| 248 |
static u8 * |
| 249 |
iwl_mld_scan_add_2ghz_elems(struct iwl_mld *mld, const u8 *ies, |
| 250 |
size_t len, u8 *const pos) |
| 251 |
{ |
| 252 |
static const u8 before_ds_params[] = { |
| 253 |
WLAN_EID_SSID, |
| 254 |
WLAN_EID_SUPP_RATES, |
| 255 |
WLAN_EID_REQUEST, |
| 256 |
WLAN_EID_EXT_SUPP_RATES, |
| 257 |
}; |
| 258 |
size_t offs; |
| 259 |
u8 *newpos = pos; |
| 260 |
|
| 261 |
offs = ieee80211_ie_split(ies, len, |
| 262 |
before_ds_params, |
| 263 |
ARRAY_SIZE(before_ds_params), |
| 264 |
0); |
| 265 |
|
| 266 |
memcpy(newpos, ies, offs); |
| 267 |
newpos += offs; |
| 268 |
|
| 269 |
/* Add a placeholder for DS Parameter Set element */ |
| 270 |
*newpos++ = WLAN_EID_DS_PARAMS; |
| 271 |
*newpos++ = 1; |
| 272 |
*newpos++ = 0; |
| 273 |
|
| 274 |
memcpy(newpos, ies + offs, len - offs); |
| 275 |
newpos += len - offs; |
| 276 |
|
| 277 |
return newpos; |
| 278 |
} |
| 279 |
|
| 280 |
static void |
| 281 |
iwl_mld_scan_add_tpc_report_elem(u8 *pos) |
| 282 |
{ |
| 283 |
pos[0] = WLAN_EID_VENDOR_SPECIFIC; |
| 284 |
pos[1] = WFA_TPC_IE_LEN - 2; |
| 285 |
pos[2] = (WLAN_OUI_MICROSOFT >> 16) & 0xff; |
| 286 |
pos[3] = (WLAN_OUI_MICROSOFT >> 8) & 0xff; |
| 287 |
pos[4] = WLAN_OUI_MICROSOFT & 0xff; |
| 288 |
pos[5] = WLAN_OUI_TYPE_MICROSOFT_TPC; |
| 289 |
pos[6] = 0; |
| 290 |
/* pos[7] - tx power will be inserted by the FW */ |
| 291 |
pos[7] = 0; |
| 292 |
pos[8] = 0; |
| 293 |
} |
| 294 |
|
| 295 |
static u32 |
| 296 |
iwl_mld_scan_ooc_priority(enum iwl_mld_scan_status scan_status) |
| 297 |
{ |
| 298 |
if (scan_status == IWL_MLD_SCAN_REGULAR) |
| 299 |
return IWL_SCAN_PRIORITY_EXT_6; |
| 300 |
if (scan_status == IWL_MLD_SCAN_INT_MLO) |
| 301 |
return IWL_SCAN_PRIORITY_EXT_4; |
| 302 |
|
| 303 |
return IWL_SCAN_PRIORITY_EXT_2; |
| 304 |
} |
| 305 |
|
| 306 |
static bool |
| 307 |
iwl_mld_scan_is_regular(struct iwl_mld_scan_params *params) |
| 308 |
{ |
| 309 |
return params->n_scan_plans == 1 && |
| 310 |
params->scan_plans[0].iterations == 1; |
| 311 |
} |
| 312 |
|
| 313 |
static bool |
| 314 |
iwl_mld_scan_is_fragmented(enum iwl_mld_scan_type type) |
| 315 |
{ |
| 316 |
return (type == IWL_SCAN_TYPE_FRAGMENTED || |
| 317 |
type == IWL_SCAN_TYPE_FAST_BALANCE); |
| 318 |
} |
| 319 |
|
| 320 |
static int |
| 321 |
iwl_mld_scan_uid_by_status(struct iwl_mld *mld, int status) |
| 322 |
{ |
| 323 |
for (int i = 0; i < ARRAY_SIZE(mld->scan.uid_status); i++) |
| 324 |
if (mld->scan.uid_status[i] == status) |
| 325 |
return i; |
| 326 |
|
| 327 |
return -ENOENT; |
| 328 |
} |
| 329 |
|
| 330 |
static const char * |
| 331 |
iwl_mld_scan_ebs_status_str(enum iwl_scan_ebs_status status) |
| 332 |
{ |
| 333 |
switch (status) { |
| 334 |
case IWL_SCAN_EBS_SUCCESS: |
| 335 |
return "successful"; |
| 336 |
case IWL_SCAN_EBS_INACTIVE: |
| 337 |
return "inactive"; |
| 338 |
case IWL_SCAN_EBS_FAILED: |
| 339 |
case IWL_SCAN_EBS_CHAN_NOT_FOUND: |
| 340 |
default: |
| 341 |
return "failed"; |
| 342 |
} |
| 343 |
} |
| 344 |
|
| 345 |
static int |
| 346 |
iwl_mld_scan_ssid_exist(u8 *ssid, u8 ssid_len, struct iwl_ssid_ie *ssid_list) |
| 347 |
{ |
| 348 |
for (int i = 0; i < PROBE_OPTION_MAX; i++) { |
| 349 |
if (!ssid_list[i].len) |
| 350 |
return -1; |
| 351 |
if (ssid_list[i].len == ssid_len && |
| 352 |
!memcmp(ssid_list[i].ssid, ssid, ssid_len)) |
| 353 |
return i; |
| 354 |
} |
| 355 |
|
| 356 |
return -1; |
| 357 |
} |
| 358 |
|
| 359 |
static bool |
| 360 |
iwl_mld_scan_fits(struct iwl_mld *mld, int n_ssids, |
| 361 |
struct ieee80211_scan_ies *ies, int n_channels) |
| 362 |
{ |
| 363 |
return ((n_ssids <= PROBE_OPTION_MAX) && |
| 364 |
(n_channels <= mld->fw->ucode_capa.n_scan_channels) && |
| 365 |
(ies->common_ie_len + ies->len[NL80211_BAND_2GHZ] + |
| 366 |
ies->len[NL80211_BAND_5GHZ] + ies->len[NL80211_BAND_6GHZ] <= |
| 367 |
iwl_mld_scan_max_template_size())); |
| 368 |
} |
| 369 |
|
| 370 |
static void |
| 371 |
iwl_mld_scan_build_probe_req(struct iwl_mld *mld, struct ieee80211_vif *vif, |
| 372 |
struct ieee80211_scan_ies *ies, |
| 373 |
struct iwl_mld_scan_params *params) |
| 374 |
{ |
| 375 |
struct ieee80211_mgmt *frame = (void *)params->preq.buf; |
| 376 |
u8 *pos, *newpos; |
| 377 |
const u8 *mac_addr = params->flags & NL80211_SCAN_FLAG_RANDOM_ADDR ? |
| 378 |
params->mac_addr : NULL; |
| 379 |
|
| 380 |
if (mac_addr) |
| 381 |
get_random_mask_addr(frame->sa, mac_addr, |
| 382 |
params->mac_addr_mask); |
| 383 |
else |
| 384 |
memcpy(frame->sa, vif->addr, ETH_ALEN); |
| 385 |
|
| 386 |
frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); |
| 387 |
eth_broadcast_addr(frame->da); |
| 388 |
ether_addr_copy(frame->bssid, params->bssid); |
| 389 |
frame->seq_ctrl = 0; |
| 390 |
|
| 391 |
pos = frame->u.probe_req.variable; |
| 392 |
*pos++ = WLAN_EID_SSID; |
| 393 |
*pos++ = 0; |
| 394 |
|
| 395 |
params->preq.mac_header.offset = 0; |
| 396 |
params->preq.mac_header.len = cpu_to_le16(24 + 2); |
| 397 |
|
| 398 |
/* Insert DS parameter set element on 2.4 GHz band */ |
| 399 |
newpos = iwl_mld_scan_add_2ghz_elems(mld, |
| 400 |
ies->ies[NL80211_BAND_2GHZ], |
| 401 |
ies->len[NL80211_BAND_2GHZ], |
| 402 |
pos); |
| 403 |
params->preq.band_data[0].offset = cpu_to_le16(pos - params->preq.buf); |
| 404 |
params->preq.band_data[0].len = cpu_to_le16(newpos - pos); |
| 405 |
pos = newpos; |
| 406 |
|
| 407 |
memcpy(pos, ies->ies[NL80211_BAND_5GHZ], |
| 408 |
ies->len[NL80211_BAND_5GHZ]); |
| 409 |
params->preq.band_data[1].offset = cpu_to_le16(pos - params->preq.buf); |
| 410 |
params->preq.band_data[1].len = |
| 411 |
cpu_to_le16(ies->len[NL80211_BAND_5GHZ]); |
| 412 |
pos += ies->len[NL80211_BAND_5GHZ]; |
| 413 |
|
| 414 |
memcpy(pos, ies->ies[NL80211_BAND_6GHZ], |
| 415 |
ies->len[NL80211_BAND_6GHZ]); |
| 416 |
params->preq.band_data[2].offset = cpu_to_le16(pos - params->preq.buf); |
| 417 |
params->preq.band_data[2].len = |
| 418 |
cpu_to_le16(ies->len[NL80211_BAND_6GHZ]); |
| 419 |
pos += ies->len[NL80211_BAND_6GHZ]; |
| 420 |
|
| 421 |
memcpy(pos, ies->common_ies, ies->common_ie_len); |
| 422 |
params->preq.common_data.offset = cpu_to_le16(pos - params->preq.buf); |
| 423 |
|
| 424 |
iwl_mld_scan_add_tpc_report_elem(pos + ies->common_ie_len); |
| 425 |
params->preq.common_data.len = cpu_to_le16(ies->common_ie_len + |
| 426 |
WFA_TPC_IE_LEN); |
| 427 |
} |
| 428 |
|
| 429 |
static u16 |
| 430 |
iwl_mld_scan_get_cmd_gen_flags(struct iwl_mld *mld, |
| 431 |
struct iwl_mld_scan_params *params, |
| 432 |
struct ieee80211_vif *vif, |
| 433 |
enum iwl_mld_scan_status scan_status) |
| 434 |
{ |
| 435 |
u16 flags = 0; |
| 436 |
|
| 437 |
/* If no direct SSIDs are provided perform a passive scan. Otherwise, |
| 438 |
* if there is a single SSID which is not the broadcast SSID, assume |
| 439 |
* that the scan is intended for roaming purposes and thus enable Rx on |
| 440 |
* all chains to improve chances of hearing the beacons/probe responses. |
| 441 |
*/ |
| 442 |
if (params->n_ssids == 0) |
| 443 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE; |
| 444 |
else if (params->n_ssids == 1 && params->ssids[0].ssid_len) |
| 445 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_USE_ALL_RX_CHAINS; |
| 446 |
|
| 447 |
if (params->pass_all) |
| 448 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_PASS_ALL; |
| 449 |
else |
| 450 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_MATCH; |
| 451 |
|
| 452 |
if (iwl_mld_scan_is_fragmented(params->type)) |
| 453 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1; |
| 454 |
|
| 455 |
if (!iwl_mld_scan_is_regular(params)) |
| 456 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_PERIODIC; |
| 457 |
|
| 458 |
if (params->iter_notif || |
| 459 |
mld->scan.pass_all_sched_res == SCHED_SCAN_PASS_ALL_STATE_ENABLED) |
| 460 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_NTFY_ITER_COMPLETE; |
| 461 |
|
| 462 |
if (scan_status == IWL_MLD_SCAN_SCHED || |
| 463 |
scan_status == IWL_MLD_SCAN_NETDETECT) |
| 464 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_PREEMPTIVE; |
| 465 |
|
| 466 |
if (params->flags & (NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP | |
| 467 |
NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE | |
| 468 |
NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME)) |
| 469 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_OCE; |
| 470 |
|
| 471 |
if ((scan_status == IWL_MLD_SCAN_SCHED || |
| 472 |
scan_status == IWL_MLD_SCAN_NETDETECT) && |
| 473 |
params->flags & NL80211_SCAN_FLAG_COLOCATED_6GHZ) |
| 474 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_TRIGGER_UHB_SCAN; |
| 475 |
|
| 476 |
if (scan_status == IWL_MLD_SCAN_INT_MLO) |
| 477 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_NTF_START; |
| 478 |
|
| 479 |
if (params->enable_6ghz_passive) |
| 480 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_6GHZ_PASSIVE_SCAN; |
| 481 |
|
| 482 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS_V2_ADAPTIVE_DWELL; |
| 483 |
|
| 484 |
return flags; |
| 485 |
} |
| 486 |
|
| 487 |
static u8 |
| 488 |
iwl_mld_scan_get_cmd_gen_flags2(struct iwl_mld *mld, |
| 489 |
struct iwl_mld_scan_params *params, |
| 490 |
struct ieee80211_vif *vif, |
| 491 |
enum iwl_mld_scan_status scan_status, |
| 492 |
u16 gen_flags) |
| 493 |
{ |
| 494 |
u8 flags = 0; |
| 495 |
|
| 496 |
/* TODO: CDB */ |
| 497 |
if (params->respect_p2p_go) |
| 498 |
flags |= IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_LB | |
| 499 |
IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_RESPECT_P2P_GO_HB; |
| 500 |
|
| 501 |
if (params->scan_6ghz) |
| 502 |
flags |= IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_DONT_TOGGLE_ANT; |
| 503 |
|
| 504 |
/* For AP interfaces, request survey data for regular scans and if |
| 505 |
* it is supported. For non-AP interfaces, EBS will be enabled and |
| 506 |
* the results may be missing information for some channels. |
| 507 |
*/ |
| 508 |
if (scan_status == IWL_MLD_SCAN_REGULAR && |
| 509 |
ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_AP && |
| 510 |
gen_flags & IWL_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE) |
| 511 |
flags |= IWL_UMAC_SCAN_GEN_FLAGS2_COLLECT_CHANNEL_STATS; |
| 512 |
|
| 513 |
return flags; |
| 514 |
} |
| 515 |
|
| 516 |
static void |
| 517 |
iwl_mld_scan_cmd_set_dwell(struct iwl_mld *mld, |
| 518 |
struct iwl_scan_general_params_v11 *gp, |
| 519 |
struct iwl_mld_scan_params *params) |
| 520 |
{ |
| 521 |
const struct iwl_mld_scan_timing_params *timing = |
| 522 |
&scan_timing[params->type]; |
| 523 |
|
| 524 |
gp->adwell_default_social_chn = |
| 525 |
IWL_SCAN_ADWELL_DEFAULT_N_APS_SOCIAL; |
| 526 |
gp->adwell_default_2g = IWL_SCAN_ADWELL_DEFAULT_LB_N_APS; |
| 527 |
gp->adwell_default_5g = IWL_SCAN_ADWELL_DEFAULT_HB_N_APS; |
| 528 |
|
| 529 |
if (params->n_ssids && params->ssids[0].ssid_len) |
| 530 |
gp->adwell_max_budget = |
| 531 |
cpu_to_le16(IWL_SCAN_ADWELL_MAX_BUDGET_DIRECTED_SCAN); |
| 532 |
else |
| 533 |
gp->adwell_max_budget = |
| 534 |
cpu_to_le16(IWL_SCAN_ADWELL_MAX_BUDGET_FULL_SCAN); |
| 535 |
|
| 536 |
gp->scan_priority = cpu_to_le32(IWL_SCAN_PRIORITY_EXT_6); |
| 537 |
|
| 538 |
gp->max_out_of_time[SCAN_LB_LMAC_IDX] = cpu_to_le32(timing->max_out_time); |
| 539 |
gp->suspend_time[SCAN_LB_LMAC_IDX] = cpu_to_le32(timing->suspend_time); |
| 540 |
|
| 541 |
gp->active_dwell[SCAN_LB_LMAC_IDX] = IWL_SCAN_DWELL_ACTIVE; |
| 542 |
gp->passive_dwell[SCAN_LB_LMAC_IDX] = IWL_SCAN_DWELL_PASSIVE; |
| 543 |
gp->active_dwell[SCAN_HB_LMAC_IDX] = IWL_SCAN_DWELL_ACTIVE; |
| 544 |
gp->passive_dwell[SCAN_HB_LMAC_IDX] = IWL_SCAN_DWELL_PASSIVE; |
| 545 |
|
| 546 |
IWL_DEBUG_SCAN(mld, |
| 547 |
"Scan: adwell_max_budget=%d max_out_of_time=%d suspend_time=%d\n", |
| 548 |
gp->adwell_max_budget, |
| 549 |
gp->max_out_of_time[SCAN_LB_LMAC_IDX], |
| 550 |
gp->suspend_time[SCAN_LB_LMAC_IDX]); |
| 551 |
} |
| 552 |
|
| 553 |
static void |
| 554 |
iwl_mld_scan_cmd_set_gen_params(struct iwl_mld *mld, |
| 555 |
struct iwl_mld_scan_params *params, |
| 556 |
struct ieee80211_vif *vif, |
| 557 |
struct iwl_scan_general_params_v11 *gp, |
| 558 |
enum iwl_mld_scan_status scan_status) |
| 559 |
{ |
| 560 |
u16 gen_flags = iwl_mld_scan_get_cmd_gen_flags(mld, params, vif, |
| 561 |
scan_status); |
| 562 |
u8 gen_flags2 = iwl_mld_scan_get_cmd_gen_flags2(mld, params, vif, |
| 563 |
scan_status, |
| 564 |
gen_flags); |
| 565 |
|
| 566 |
IWL_DEBUG_SCAN(mld, "General: flags=0x%x, flags2=0x%x\n", |
| 567 |
gen_flags, gen_flags2); |
| 568 |
|
| 569 |
gp->flags = cpu_to_le16(gen_flags); |
| 570 |
gp->flags2 = gen_flags2; |
| 571 |
|
| 572 |
iwl_mld_scan_cmd_set_dwell(mld, gp, params); |
| 573 |
|
| 574 |
if (gen_flags & IWL_UMAC_SCAN_GEN_FLAGS_V2_FRAGMENTED_LMAC1) |
| 575 |
gp->num_of_fragments[SCAN_LB_LMAC_IDX] = IWL_SCAN_NUM_OF_FRAGS; |
| 576 |
|
| 577 |
if (params->fw_link_id != IWL_MLD_INVALID_FW_ID) |
| 578 |
gp->scan_start_mac_or_link_id = params->fw_link_id; |
| 579 |
} |
| 580 |
|
| 581 |
static int |
| 582 |
iwl_mld_scan_cmd_set_sched_params(struct iwl_mld_scan_params *params, |
| 583 |
struct iwl_scan_umac_schedule *schedule, |
| 584 |
__le16 *delay) |
| 585 |
{ |
| 586 |
if (WARN_ON(!params->n_scan_plans || |
| 587 |
params->n_scan_plans > IWL_MAX_SCHED_SCAN_PLANS)) |
| 588 |
return -EINVAL; |
| 589 |
|
| 590 |
for (int i = 0; i < params->n_scan_plans; i++) { |
| 591 |
struct cfg80211_sched_scan_plan *scan_plan = |
| 592 |
¶ms->scan_plans[i]; |
| 593 |
|
| 594 |
schedule[i].iter_count = scan_plan->iterations; |
| 595 |
schedule[i].interval = |
| 596 |
cpu_to_le16(scan_plan->interval); |
| 597 |
} |
| 598 |
|
| 599 |
/* If the number of iterations of the last scan plan is set to zero, |
| 600 |
* it should run infinitely. However, this is not always the case. |
| 601 |
* For example, when regular scan is requested the driver sets one scan |
| 602 |
* plan with one iteration. |
| 603 |
*/ |
| 604 |
if (!schedule[params->n_scan_plans - 1].iter_count) |
| 605 |
schedule[params->n_scan_plans - 1].iter_count = 0xff; |
| 606 |
|
| 607 |
*delay = cpu_to_le16(params->delay); |
| 608 |
|
| 609 |
return 0; |
| 610 |
} |
| 611 |
|
| 612 |
/* We insert the SSIDs in an inverted order, because the FW will |
| 613 |
* invert it back. |
| 614 |
*/ |
| 615 |
static void |
| 616 |
iwl_mld_scan_cmd_build_ssids(struct iwl_mld_scan_params *params, |
| 617 |
struct iwl_ssid_ie *ssids, u32 *ssid_bitmap) |
| 618 |
{ |
| 619 |
int i, j; |
| 620 |
int index; |
| 621 |
u32 tmp_bitmap = 0; |
| 622 |
|
| 623 |
/* copy SSIDs from match list. iwl_config_sched_scan_profiles() |
| 624 |
* uses the order of these ssids to config match list. |
| 625 |
*/ |
| 626 |
for (i = 0, j = params->n_match_sets - 1; |
| 627 |
j >= 0 && i < PROBE_OPTION_MAX; |
| 628 |
i++, j--) { |
| 629 |
/* skip empty SSID match_sets */ |
| 630 |
if (!params->match_sets[j].ssid.ssid_len) |
| 631 |
continue; |
| 632 |
|
| 633 |
ssids[i].id = WLAN_EID_SSID; |
| 634 |
ssids[i].len = params->match_sets[j].ssid.ssid_len; |
| 635 |
memcpy(ssids[i].ssid, params->match_sets[j].ssid.ssid, |
| 636 |
ssids[i].len); |
| 637 |
} |
| 638 |
|
| 639 |
/* add SSIDs from scan SSID list */ |
| 640 |
for (j = params->n_ssids - 1; |
| 641 |
j >= 0 && i < PROBE_OPTION_MAX; |
| 642 |
i++, j--) { |
| 643 |
index = iwl_mld_scan_ssid_exist(params->ssids[j].ssid, |
| 644 |
params->ssids[j].ssid_len, |
| 645 |
ssids); |
| 646 |
if (index < 0) { |
| 647 |
ssids[i].id = WLAN_EID_SSID; |
| 648 |
ssids[i].len = params->ssids[j].ssid_len; |
| 649 |
memcpy(ssids[i].ssid, params->ssids[j].ssid, |
| 650 |
ssids[i].len); |
| 651 |
tmp_bitmap |= BIT(i); |
| 652 |
} else { |
| 653 |
tmp_bitmap |= BIT(index); |
| 654 |
} |
| 655 |
} |
| 656 |
|
| 657 |
if (ssid_bitmap) |
| 658 |
*ssid_bitmap = tmp_bitmap; |
| 659 |
} |
| 660 |
|
| 661 |
static void |
| 662 |
iwl_mld_scan_fill_6g_chan_list(struct iwl_mld_scan_params *params, |
| 663 |
struct iwl_scan_probe_params_v4 *pp) |
| 664 |
{ |
| 665 |
int j, idex_s = 0, idex_b = 0; |
| 666 |
struct cfg80211_scan_6ghz_params *scan_6ghz_params = |
| 667 |
params->scan_6ghz_params; |
| 668 |
|
| 669 |
for (j = 0; |
| 670 |
j < params->n_ssids && idex_s < SCAN_SHORT_SSID_MAX_SIZE; |
| 671 |
j++) { |
| 672 |
if (!params->ssids[j].ssid_len) |
| 673 |
continue; |
| 674 |
|
| 675 |
pp->short_ssid[idex_s] = |
| 676 |
cpu_to_le32(~crc32_le(~0, params->ssids[j].ssid, |
| 677 |
params->ssids[j].ssid_len)); |
| 678 |
|
| 679 |
/* hidden 6ghz scan */ |
| 680 |
pp->direct_scan[idex_s].id = WLAN_EID_SSID; |
| 681 |
pp->direct_scan[idex_s].len = params->ssids[j].ssid_len; |
| 682 |
memcpy(pp->direct_scan[idex_s].ssid, params->ssids[j].ssid, |
| 683 |
params->ssids[j].ssid_len); |
| 684 |
idex_s++; |
| 685 |
} |
| 686 |
|
| 687 |
/* Populate the arrays of the short SSIDs and the BSSIDs using the 6GHz |
| 688 |
* collocated parameters. This might not be optimal, as this processing |
| 689 |
* does not (yet) correspond to the actual channels, so it is possible |
| 690 |
* that some entries would be left out. |
| 691 |
*/ |
| 692 |
for (j = 0; j < params->n_6ghz_params; j++) { |
| 693 |
int k; |
| 694 |
|
| 695 |
/* First, try to place the short SSID */ |
| 696 |
if (scan_6ghz_params[j].short_ssid_valid) { |
| 697 |
for (k = 0; k < idex_s; k++) { |
| 698 |
if (pp->short_ssid[k] == |
| 699 |
cpu_to_le32(scan_6ghz_params[j].short_ssid)) |
| 700 |
break; |
| 701 |
} |
| 702 |
|
| 703 |
if (k == idex_s && idex_s < SCAN_SHORT_SSID_MAX_SIZE) { |
| 704 |
pp->short_ssid[idex_s++] = |
| 705 |
cpu_to_le32(scan_6ghz_params[j].short_ssid); |
| 706 |
} |
| 707 |
} |
| 708 |
|
| 709 |
/* try to place BSSID for the same entry */ |
| 710 |
for (k = 0; k < idex_b; k++) { |
| 711 |
if (!memcmp(&pp->bssid_array[k], |
| 712 |
scan_6ghz_params[j].bssid, ETH_ALEN)) |
| 713 |
break; |
| 714 |
} |
| 715 |
|
| 716 |
if (k == idex_b && idex_b < SCAN_BSSID_MAX_SIZE && |
| 717 |
!WARN_ONCE(!is_valid_ether_addr(scan_6ghz_params[j].bssid), |
| 718 |
"scan: invalid BSSID at index %u, index_b=%u\n", |
| 719 |
j, idex_b)) { |
| 720 |
memcpy(&pp->bssid_array[idex_b++], |
| 721 |
scan_6ghz_params[j].bssid, ETH_ALEN); |
| 722 |
} |
| 723 |
} |
| 724 |
|
| 725 |
pp->short_ssid_num = idex_s; |
| 726 |
pp->bssid_num = idex_b; |
| 727 |
} |
| 728 |
|
| 729 |
static void |
| 730 |
iwl_mld_scan_cmd_set_probe_params(struct iwl_mld_scan_params *params, |
| 731 |
struct iwl_scan_probe_params_v4 *pp, |
| 732 |
u32 *bitmap_ssid) |
| 733 |
{ |
| 734 |
pp->preq = params->preq; |
| 735 |
|
| 736 |
if (params->scan_6ghz) { |
| 737 |
iwl_mld_scan_fill_6g_chan_list(params, pp); |
| 738 |
return; |
| 739 |
} |
| 740 |
|
| 741 |
/* relevant only for 2.4 GHz /5 GHz scan */ |
| 742 |
iwl_mld_scan_cmd_build_ssids(params, pp->direct_scan, bitmap_ssid); |
| 743 |
} |
| 744 |
|
| 745 |
static bool |
| 746 |
iwl_mld_scan_use_ebs(struct iwl_mld *mld, struct ieee80211_vif *vif, |
| 747 |
bool low_latency) |
| 748 |
{ |
| 749 |
const struct iwl_ucode_capabilities *capa = &mld->fw->ucode_capa; |
| 750 |
|
| 751 |
/* We can only use EBS if: |
| 752 |
* 1. the feature is supported. |
| 753 |
* 2. the last EBS was successful. |
| 754 |
* 3. it's not a p2p find operation. |
| 755 |
* 4. we are not in low latency mode, |
| 756 |
* or if fragmented ebs is supported by the FW |
| 757 |
* 5. the VIF is not an AP interface (scan wants survey results) |
| 758 |
*/ |
| 759 |
return ((capa->flags & IWL_UCODE_TLV_FLAGS_EBS_SUPPORT) && |
| 760 |
!mld->scan.last_ebs_failed && |
| 761 |
vif->type != NL80211_IFTYPE_P2P_DEVICE && |
| 762 |
(!low_latency || fw_has_api(capa, IWL_UCODE_TLV_API_FRAG_EBS)) && |
| 763 |
ieee80211_vif_type_p2p(vif) != NL80211_IFTYPE_AP); |
| 764 |
} |
| 765 |
|
| 766 |
static u8 |
| 767 |
iwl_mld_scan_cmd_set_chan_flags(struct iwl_mld *mld, |
| 768 |
struct iwl_mld_scan_params *params, |
| 769 |
struct ieee80211_vif *vif, |
| 770 |
bool low_latency) |
| 771 |
{ |
| 772 |
u8 flags = 0; |
| 773 |
|
| 774 |
flags |= IWL_SCAN_CHANNEL_FLAG_ENABLE_CHAN_ORDER; |
| 775 |
|
| 776 |
if (iwl_mld_scan_use_ebs(mld, vif, low_latency)) |
| 777 |
flags |= IWL_SCAN_CHANNEL_FLAG_EBS | |
| 778 |
IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE | |
| 779 |
IWL_SCAN_CHANNEL_FLAG_CACHE_ADD; |
| 780 |
|
| 781 |
/* set fragmented ebs for fragmented scan */ |
| 782 |
if (iwl_mld_scan_is_fragmented(params->type)) |
| 783 |
flags |= IWL_SCAN_CHANNEL_FLAG_EBS_FRAG; |
| 784 |
|
| 785 |
/* Force EBS in case the scan is a fragmented and there is a need |
| 786 |
* to take P2P GO operation into consideration during scan operation. |
| 787 |
*/ |
| 788 |
/* TODO: CDB */ |
| 789 |
if (iwl_mld_scan_is_fragmented(params->type) && |
| 790 |
params->respect_p2p_go) { |
| 791 |
IWL_DEBUG_SCAN(mld, "Respect P2P GO. Force EBS\n"); |
| 792 |
flags |= IWL_SCAN_CHANNEL_FLAG_FORCE_EBS; |
| 793 |
} |
| 794 |
|
| 795 |
return flags; |
| 796 |
} |
| 797 |
|
| 798 |
static const u8 p2p_go_friendly_chs[] = { |
| 799 |
36, 40, 44, 48, 149, 153, 157, 161, 165, |
| 800 |
}; |
| 801 |
|
| 802 |
static const u8 social_chs[] = { |
| 803 |
1, 6, 11 |
| 804 |
}; |
| 805 |
|
| 806 |
static u32 iwl_mld_scan_ch_n_aps_flag(enum nl80211_iftype vif_type, u8 ch_id) |
| 807 |
{ |
| 808 |
if (vif_type != NL80211_IFTYPE_P2P_DEVICE) |
| 809 |
return 0; |
| 810 |
|
| 811 |
for (int i = 0; i < ARRAY_SIZE(p2p_go_friendly_chs); i++) { |
| 812 |
if (ch_id == p2p_go_friendly_chs[i]) |
| 813 |
return IWL_SCAN_ADWELL_N_APS_GO_FRIENDLY_BIT; |
| 814 |
} |
| 815 |
|
| 816 |
for (int i = 0; i < ARRAY_SIZE(social_chs); i++) { |
| 817 |
if (ch_id == social_chs[i]) |
| 818 |
return IWL_SCAN_ADWELL_N_APS_SOCIAL_CHS_BIT; |
| 819 |
} |
| 820 |
|
| 821 |
return 0; |
| 822 |
} |
| 823 |
|
| 824 |
static void |
| 825 |
iwl_mld_scan_cmd_set_channels(struct iwl_mld *mld, |
| 826 |
struct ieee80211_channel **channels, |
| 827 |
struct iwl_scan_channel_params_v7 *cp, |
| 828 |
int n_channels, u32 flags, |
| 829 |
enum nl80211_iftype vif_type) |
| 830 |
{ |
| 831 |
for (int i = 0; i < n_channels; i++) { |
| 832 |
enum nl80211_band band = channels[i]->band; |
| 833 |
struct iwl_scan_channel_cfg_umac *cfg = &cp->channel_config[i]; |
| 834 |
u8 iwl_band = iwl_mld_nl80211_band_to_fw(band); |
| 835 |
u32 n_aps_flag = |
| 836 |
iwl_mld_scan_ch_n_aps_flag(vif_type, |
| 837 |
channels[i]->hw_value); |
| 838 |
|
| 839 |
if (IWL_MLD_ADAPTIVE_DWELL_NUM_APS_OVERRIDE) |
| 840 |
n_aps_flag = IWL_SCAN_ADWELL_N_APS_GO_FRIENDLY_BIT; |
| 841 |
|
| 842 |
cfg->flags = cpu_to_le32(flags | n_aps_flag); |
| 843 |
cfg->channel_num = channels[i]->hw_value; |
| 844 |
if (cfg80211_channel_is_psc(channels[i])) |
| 845 |
cfg->flags = 0; |
| 846 |
|
| 847 |
if (band == NL80211_BAND_6GHZ) { |
| 848 |
/* 6 GHz channels should only appear in a scan request |
| 849 |
* that has scan_6ghz set. The only exception is MLO |
| 850 |
* scan, which has to be passive. |
| 851 |
*/ |
| 852 |
WARN_ON_ONCE(cfg->flags != 0); |
| 853 |
cfg->flags = |
| 854 |
cpu_to_le32(IWL_UHB_CHAN_CFG_FLAG_FORCE_PASSIVE); |
| 855 |
} |
| 856 |
|
| 857 |
cfg->v2.iter_count = 1; |
| 858 |
cfg->v2.iter_interval = 0; |
| 859 |
cfg->flags |= cpu_to_le32(iwl_band << |
| 860 |
IWL_CHAN_CFG_FLAGS_BAND_POS); |
| 861 |
} |
| 862 |
} |
| 863 |
|
| 864 |
static u8 |
| 865 |
iwl_mld_scan_cfg_channels_6g(struct iwl_mld *mld, |
| 866 |
struct iwl_mld_scan_params *params, |
| 867 |
u32 n_channels, |
| 868 |
struct iwl_scan_probe_params_v4 *pp, |
| 869 |
struct iwl_scan_channel_params_v7 *cp, |
| 870 |
enum nl80211_iftype vif_type) |
| 871 |
{ |
| 872 |
struct cfg80211_scan_6ghz_params *scan_6ghz_params = |
| 873 |
params->scan_6ghz_params; |
| 874 |
u32 i; |
| 875 |
u8 ch_cnt; |
| 876 |
|
| 877 |
for (i = 0, ch_cnt = 0; i < params->n_channels; i++) { |
| 878 |
struct iwl_scan_channel_cfg_umac *cfg = |
| 879 |
&cp->channel_config[ch_cnt]; |
| 880 |
|
| 881 |
u32 s_ssid_bitmap = 0, bssid_bitmap = 0, flags = 0; |
| 882 |
u8 k, n_s_ssids = 0, n_bssids = 0; |
| 883 |
u8 max_s_ssids, max_bssids; |
| 884 |
bool force_passive = false, found = false, allow_passive = true, |
| 885 |
unsolicited_probe_on_chan = false, psc_no_listen = false; |
| 886 |
s8 psd_20 = IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED; |
| 887 |
|
| 888 |
/* Avoid performing passive scan on non PSC channels unless the |
| 889 |
* scan is specifically a passive scan, i.e., no SSIDs |
| 890 |
* configured in the scan command. |
| 891 |
*/ |
| 892 |
if (!cfg80211_channel_is_psc(params->channels[i]) && |
| 893 |
!params->n_6ghz_params && params->n_ssids) |
| 894 |
continue; |
| 895 |
|
| 896 |
cfg->channel_num = params->channels[i]->hw_value; |
| 897 |
cfg->flags |= |
| 898 |
cpu_to_le32(PHY_BAND_6 << IWL_CHAN_CFG_FLAGS_BAND_POS); |
| 899 |
|
| 900 |
cfg->v5.iter_count = 1; |
| 901 |
cfg->v5.iter_interval = 0; |
| 902 |
|
| 903 |
for (u32 j = 0; j < params->n_6ghz_params; j++) { |
| 904 |
s8 tmp_psd_20; |
| 905 |
|
| 906 |
if (!(scan_6ghz_params[j].channel_idx == i)) |
| 907 |
continue; |
| 908 |
|
| 909 |
unsolicited_probe_on_chan |= |
| 910 |
scan_6ghz_params[j].unsolicited_probe; |
| 911 |
|
| 912 |
/* Use the highest PSD value allowed as advertised by |
| 913 |
* APs for this channel |
| 914 |
*/ |
| 915 |
tmp_psd_20 = scan_6ghz_params[j].psd_20; |
| 916 |
if (tmp_psd_20 != |
| 917 |
IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED && |
| 918 |
(psd_20 == |
| 919 |
IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED || |
| 920 |
psd_20 < tmp_psd_20)) |
| 921 |
psd_20 = tmp_psd_20; |
| 922 |
|
| 923 |
psc_no_listen |= scan_6ghz_params[j].psc_no_listen; |
| 924 |
} |
| 925 |
|
| 926 |
/* In the following cases apply passive scan: |
| 927 |
* 1. Non fragmented scan: |
| 928 |
* - PSC channel with NO_LISTEN_FLAG on should be treated |
| 929 |
* like non PSC channel |
| 930 |
* - Non PSC channel with more than 3 short SSIDs or more |
| 931 |
* than 9 BSSIDs. |
| 932 |
* - Non PSC Channel with unsolicited probe response and |
| 933 |
* more than 2 short SSIDs or more than 6 BSSIDs. |
| 934 |
* - PSC channel with more than 2 short SSIDs or more than |
| 935 |
* 6 BSSIDs. |
| 936 |
* 2. Fragmented scan: |
| 937 |
* - PSC channel with more than 1 SSID or 3 BSSIDs. |
| 938 |
* - Non PSC channel with more than 2 SSIDs or 6 BSSIDs. |
| 939 |
* - Non PSC channel with unsolicited probe response and |
| 940 |
* more than 1 SSID or more than 3 BSSIDs. |
| 941 |
*/ |
| 942 |
if (!iwl_mld_scan_is_fragmented(params->type)) { |
| 943 |
if (!cfg80211_channel_is_psc(params->channels[i]) || |
| 944 |
psc_no_listen) { |
| 945 |
if (unsolicited_probe_on_chan) { |
| 946 |
max_s_ssids = 2; |
| 947 |
max_bssids = 6; |
| 948 |
} else { |
| 949 |
max_s_ssids = 3; |
| 950 |
max_bssids = 9; |
| 951 |
} |
| 952 |
} else { |
| 953 |
max_s_ssids = 2; |
| 954 |
max_bssids = 6; |
| 955 |
} |
| 956 |
} else if (cfg80211_channel_is_psc(params->channels[i])) { |
| 957 |
max_s_ssids = 1; |
| 958 |
max_bssids = 3; |
| 959 |
} else { |
| 960 |
if (unsolicited_probe_on_chan) { |
| 961 |
max_s_ssids = 1; |
| 962 |
max_bssids = 3; |
| 963 |
} else { |
| 964 |
max_s_ssids = 2; |
| 965 |
max_bssids = 6; |
| 966 |
} |
| 967 |
} |
| 968 |
|
| 969 |
/* To optimize the scan time, i.e., reduce the scan dwell time |
| 970 |
* on each channel, the below logic tries to set 3 direct BSSID |
| 971 |
* probe requests for each broadcast probe request with a short |
| 972 |
* SSID. |
| 973 |
*/ |
| 974 |
for (u32 j = 0; j < params->n_6ghz_params; j++) { |
| 975 |
if (!(scan_6ghz_params[j].channel_idx == i)) |
| 976 |
continue; |
| 977 |
|
| 978 |
found = false; |
| 979 |
|
| 980 |
for (k = 0; |
| 981 |
k < pp->short_ssid_num && n_s_ssids < max_s_ssids; |
| 982 |
k++) { |
| 983 |
if (!scan_6ghz_params[j].unsolicited_probe && |
| 984 |
le32_to_cpu(pp->short_ssid[k]) == |
| 985 |
scan_6ghz_params[j].short_ssid) { |
| 986 |
/* Relevant short SSID bit set */ |
| 987 |
if (s_ssid_bitmap & BIT(k)) { |
| 988 |
found = true; |
| 989 |
break; |
| 990 |
} |
| 991 |
|
| 992 |
/* Prefer creating BSSID entries unless |
| 993 |
* the short SSID probe can be done in |
| 994 |
* the same channel dwell iteration. |
| 995 |
* |
| 996 |
* We also need to create a short SSID |
| 997 |
* entry for any hidden AP. |
| 998 |
*/ |
| 999 |
if (3 * n_s_ssids > n_bssids && |
| 1000 |
!pp->direct_scan[k].len) |
| 1001 |
break; |
| 1002 |
|
| 1003 |
/* Hidden AP, cannot do passive scan */ |
| 1004 |
if (pp->direct_scan[k].len) |
| 1005 |
allow_passive = false; |
| 1006 |
|
| 1007 |
s_ssid_bitmap |= BIT(k); |
| 1008 |
n_s_ssids++; |
| 1009 |
found = true; |
| 1010 |
break; |
| 1011 |
} |
| 1012 |
} |
| 1013 |
|
| 1014 |
if (found) |
| 1015 |
continue; |
| 1016 |
|
| 1017 |
for (k = 0; k < pp->bssid_num; k++) { |
| 1018 |
if (memcmp(&pp->bssid_array[k], |
| 1019 |
scan_6ghz_params[j].bssid, |
| 1020 |
ETH_ALEN)) |
| 1021 |
continue; |
| 1022 |
|
| 1023 |
if (bssid_bitmap & BIT(k)) |
| 1024 |
break; |
| 1025 |
|
| 1026 |
if (n_bssids < max_bssids) { |
| 1027 |
bssid_bitmap |= BIT(k); |
| 1028 |
n_bssids++; |
| 1029 |
} else { |
| 1030 |
force_passive = TRUE; |
| 1031 |
} |
| 1032 |
|
| 1033 |
break; |
| 1034 |
} |
| 1035 |
} |
| 1036 |
|
| 1037 |
if (cfg80211_channel_is_psc(params->channels[i]) && |
| 1038 |
psc_no_listen) |
| 1039 |
flags |= IWL_UHB_CHAN_CFG_FLAG_PSC_CHAN_NO_LISTEN; |
| 1040 |
|
| 1041 |
if (unsolicited_probe_on_chan) |
| 1042 |
flags |= IWL_UHB_CHAN_CFG_FLAG_UNSOLICITED_PROBE_RES; |
| 1043 |
|
| 1044 |
if ((allow_passive && force_passive) || |
| 1045 |
(!(bssid_bitmap | s_ssid_bitmap) && |
| 1046 |
!cfg80211_channel_is_psc(params->channels[i]))) |
| 1047 |
flags |= IWL_UHB_CHAN_CFG_FLAG_FORCE_PASSIVE; |
| 1048 |
else |
| 1049 |
flags |= bssid_bitmap | (s_ssid_bitmap << 16); |
| 1050 |
|
| 1051 |
cfg->flags |= cpu_to_le32(flags); |
| 1052 |
cfg->v5.psd_20 = psd_20; |
| 1053 |
|
| 1054 |
ch_cnt++; |
| 1055 |
} |
| 1056 |
|
| 1057 |
if (params->n_channels > ch_cnt) |
| 1058 |
IWL_DEBUG_SCAN(mld, |
| 1059 |
"6GHz: reducing number channels: (%u->%u)\n", |
| 1060 |
params->n_channels, ch_cnt); |
| 1061 |
|
| 1062 |
return ch_cnt; |
| 1063 |
} |
| 1064 |
|
| 1065 |
static int |
| 1066 |
iwl_mld_scan_cmd_set_6ghz_chan_params(struct iwl_mld *mld, |
| 1067 |
struct iwl_mld_scan_params *params, |
| 1068 |
struct ieee80211_vif *vif, |
| 1069 |
struct iwl_scan_req_params_v17 *scan_p) |
| 1070 |
{ |
| 1071 |
struct iwl_scan_channel_params_v7 *chan_p = &scan_p->channel_params; |
| 1072 |
struct iwl_scan_probe_params_v4 *probe_p = &scan_p->probe_params; |
| 1073 |
|
| 1074 |
/* Explicitly clear the flags since most of them are not |
| 1075 |
* relevant for 6 GHz scan. |
| 1076 |
*/ |
| 1077 |
chan_p->flags = 0; |
| 1078 |
chan_p->count = iwl_mld_scan_cfg_channels_6g(mld, params, |
| 1079 |
params->n_channels, |
| 1080 |
probe_p, chan_p, |
| 1081 |
vif->type); |
| 1082 |
if (!chan_p->count) |
| 1083 |
return -EINVAL; |
| 1084 |
|
| 1085 |
if (!params->n_ssids || |
| 1086 |
(params->n_ssids == 1 && !params->ssids[0].ssid_len)) |
| 1087 |
chan_p->flags |= IWL_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER; |
| 1088 |
|
| 1089 |
return 0; |
| 1090 |
} |
| 1091 |
|
| 1092 |
static int |
| 1093 |
iwl_mld_scan_cmd_set_chan_params(struct iwl_mld *mld, |
| 1094 |
struct iwl_mld_scan_params *params, |
| 1095 |
struct ieee80211_vif *vif, |
| 1096 |
struct iwl_scan_req_params_v17 *scan_p, |
| 1097 |
bool low_latency, |
| 1098 |
enum iwl_mld_scan_status scan_status, |
| 1099 |
u32 channel_cfg_flags) |
| 1100 |
{ |
| 1101 |
struct iwl_scan_channel_params_v7 *cp = &scan_p->channel_params; |
| 1102 |
struct ieee80211_supported_band *sband = |
| 1103 |
&mld->nvm_data->bands[NL80211_BAND_6GHZ]; |
| 1104 |
|
| 1105 |
cp->n_aps_override[0] = IWL_SCAN_ADWELL_N_APS_GO_FRIENDLY; |
| 1106 |
cp->n_aps_override[1] = IWL_SCAN_ADWELL_N_APS_SOCIAL_CHS; |
| 1107 |
|
| 1108 |
if (IWL_MLD_ADAPTIVE_DWELL_NUM_APS_OVERRIDE) |
| 1109 |
cp->n_aps_override[0] = IWL_MLD_ADAPTIVE_DWELL_NUM_APS_OVERRIDE; |
| 1110 |
|
| 1111 |
if (params->scan_6ghz) |
| 1112 |
return iwl_mld_scan_cmd_set_6ghz_chan_params(mld, params, |
| 1113 |
vif, scan_p); |
| 1114 |
|
| 1115 |
/* relevant only for 2.4 GHz/5 GHz scan */ |
| 1116 |
cp->flags = iwl_mld_scan_cmd_set_chan_flags(mld, params, vif, |
| 1117 |
low_latency); |
| 1118 |
cp->count = params->n_channels; |
| 1119 |
|
| 1120 |
iwl_mld_scan_cmd_set_channels(mld, params->channels, cp, |
| 1121 |
params->n_channels, channel_cfg_flags, |
| 1122 |
vif->type); |
| 1123 |
|
| 1124 |
if (!params->enable_6ghz_passive) |
| 1125 |
return 0; |
| 1126 |
|
| 1127 |
/* fill 6 GHz passive scan cfg */ |
| 1128 |
for (int i = 0; i < sband->n_channels; i++) { |
| 1129 |
struct ieee80211_channel *channel = |
| 1130 |
&sband->channels[i]; |
| 1131 |
struct iwl_scan_channel_cfg_umac *cfg = |
| 1132 |
&cp->channel_config[cp->count]; |
| 1133 |
|
| 1134 |
if (!cfg80211_channel_is_psc(channel)) |
| 1135 |
continue; |
| 1136 |
|
| 1137 |
cfg->channel_num = channel->hw_value; |
| 1138 |
cfg->v5.iter_count = 1; |
| 1139 |
cfg->v5.iter_interval = 0; |
| 1140 |
cfg->v5.psd_20 = |
| 1141 |
IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED; |
| 1142 |
cfg->flags = cpu_to_le32(PHY_BAND_6 << |
| 1143 |
IWL_CHAN_CFG_FLAGS_BAND_POS); |
| 1144 |
cp->count++; |
| 1145 |
} |
| 1146 |
|
| 1147 |
return 0; |
| 1148 |
} |
| 1149 |
|
| 1150 |
static int |
| 1151 |
iwl_mld_scan_build_cmd(struct iwl_mld *mld, struct ieee80211_vif *vif, |
| 1152 |
struct iwl_mld_scan_params *params, |
| 1153 |
enum iwl_mld_scan_status scan_status, |
| 1154 |
bool low_latency) |
| 1155 |
{ |
| 1156 |
struct iwl_scan_req_umac_v17 *cmd = mld->scan.cmd; |
| 1157 |
struct iwl_scan_req_params_v17 *scan_p = &cmd->scan_params; |
| 1158 |
u32 bitmap_ssid = 0; |
| 1159 |
int uid, ret; |
| 1160 |
|
| 1161 |
memset(mld->scan.cmd, 0, mld->scan.cmd_size); |
| 1162 |
|
| 1163 |
/* find a free UID entry */ |
| 1164 |
uid = iwl_mld_scan_uid_by_status(mld, IWL_MLD_SCAN_NONE); |
| 1165 |
if (uid < 0) |
| 1166 |
return uid; |
| 1167 |
|
| 1168 |
cmd->uid = cpu_to_le32(uid); |
| 1169 |
cmd->ooc_priority = |
| 1170 |
cpu_to_le32(iwl_mld_scan_ooc_priority(scan_status)); |
| 1171 |
|
| 1172 |
iwl_mld_scan_cmd_set_gen_params(mld, params, vif, |
| 1173 |
&scan_p->general_params, scan_status); |
| 1174 |
|
| 1175 |
ret = iwl_mld_scan_cmd_set_sched_params(params, |
| 1176 |
scan_p->periodic_params.schedule, |
| 1177 |
&scan_p->periodic_params.delay); |
| 1178 |
if (ret) |
| 1179 |
return ret; |
| 1180 |
|
| 1181 |
iwl_mld_scan_cmd_set_probe_params(params, &scan_p->probe_params, |
| 1182 |
&bitmap_ssid); |
| 1183 |
|
| 1184 |
ret = iwl_mld_scan_cmd_set_chan_params(mld, params, vif, scan_p, |
| 1185 |
low_latency, scan_status, |
| 1186 |
bitmap_ssid); |
| 1187 |
if (ret) |
| 1188 |
return ret; |
| 1189 |
|
| 1190 |
return uid; |
| 1191 |
} |
| 1192 |
|
| 1193 |
static bool |
| 1194 |
iwl_mld_scan_pass_all(struct iwl_mld *mld, |
| 1195 |
struct cfg80211_sched_scan_request *req) |
| 1196 |
{ |
| 1197 |
if (req->n_match_sets && req->match_sets[0].ssid.ssid_len) { |
| 1198 |
IWL_DEBUG_SCAN(mld, |
| 1199 |
"Sending scheduled scan with filtering, n_match_sets %d\n", |
| 1200 |
req->n_match_sets); |
| 1201 |
mld->scan.pass_all_sched_res = SCHED_SCAN_PASS_ALL_STATE_DISABLED; |
| 1202 |
return false; |
| 1203 |
} |
| 1204 |
|
| 1205 |
IWL_DEBUG_SCAN(mld, "Sending Scheduled scan without filtering\n"); |
| 1206 |
mld->scan.pass_all_sched_res = SCHED_SCAN_PASS_ALL_STATE_ENABLED; |
| 1207 |
|
| 1208 |
return true; |
| 1209 |
} |
| 1210 |
|
| 1211 |
static int |
| 1212 |
iwl_mld_config_sched_scan_profiles(struct iwl_mld *mld, |
| 1213 |
struct cfg80211_sched_scan_request *req) |
| 1214 |
{ |
| 1215 |
struct iwl_host_cmd hcmd = { |
| 1216 |
.id = SCAN_OFFLOAD_UPDATE_PROFILES_CMD, |
| 1217 |
.dataflags[0] = IWL_HCMD_DFL_NOCOPY, |
| 1218 |
}; |
| 1219 |
struct iwl_scan_offload_profile *profile; |
| 1220 |
struct iwl_scan_offload_profile_cfg_data *cfg_data; |
| 1221 |
struct iwl_scan_offload_profile_cfg *profile_cfg; |
| 1222 |
struct iwl_scan_offload_blocklist *blocklist; |
| 1223 |
u32 blocklist_size = IWL_SCAN_MAX_BLACKLIST_LEN * sizeof(*blocklist); |
| 1224 |
u32 cmd_size = blocklist_size + sizeof(*profile_cfg); |
| 1225 |
u8 *cmd; |
| 1226 |
int ret; |
| 1227 |
|
| 1228 |
if (WARN_ON(req->n_match_sets > IWL_SCAN_MAX_PROFILES_V2)) |
| 1229 |
return -EIO; |
| 1230 |
|
| 1231 |
cmd = kzalloc(cmd_size, GFP_KERNEL); |
| 1232 |
if (!cmd) |
| 1233 |
return -ENOMEM; |
| 1234 |
|
| 1235 |
hcmd.data[0] = cmd; |
| 1236 |
hcmd.len[0] = cmd_size; |
| 1237 |
|
| 1238 |
blocklist = (struct iwl_scan_offload_blocklist *)cmd; |
| 1239 |
profile_cfg = (struct iwl_scan_offload_profile_cfg *)(cmd + blocklist_size); |
| 1240 |
|
| 1241 |
/* No blocklist configuration */ |
| 1242 |
cfg_data = &profile_cfg->data; |
| 1243 |
cfg_data->num_profiles = req->n_match_sets; |
| 1244 |
cfg_data->active_clients = SCAN_CLIENT_SCHED_SCAN; |
| 1245 |
cfg_data->pass_match = SCAN_CLIENT_SCHED_SCAN; |
| 1246 |
cfg_data->match_notify = SCAN_CLIENT_SCHED_SCAN; |
| 1247 |
|
| 1248 |
if (!req->n_match_sets || !req->match_sets[0].ssid.ssid_len) |
| 1249 |
cfg_data->any_beacon_notify = SCAN_CLIENT_SCHED_SCAN; |
| 1250 |
|
| 1251 |
for (int i = 0; i < req->n_match_sets; i++) { |
| 1252 |
profile = &profile_cfg->profiles[i]; |
| 1253 |
|
| 1254 |
/* Support any cipher and auth algorithm */ |
| 1255 |
profile->unicast_cipher = 0xff; |
| 1256 |
profile->auth_alg = IWL_AUTH_ALGO_UNSUPPORTED | |
| 1257 |
IWL_AUTH_ALGO_NONE | IWL_AUTH_ALGO_PSK | |
| 1258 |
IWL_AUTH_ALGO_8021X | IWL_AUTH_ALGO_SAE | |
| 1259 |
IWL_AUTH_ALGO_8021X_SHA384 | IWL_AUTH_ALGO_OWE; |
| 1260 |
profile->network_type = IWL_NETWORK_TYPE_ANY; |
| 1261 |
profile->band_selection = IWL_SCAN_OFFLOAD_SELECT_ANY; |
| 1262 |
profile->client_bitmap = SCAN_CLIENT_SCHED_SCAN; |
| 1263 |
profile->ssid_index = i; |
| 1264 |
} |
| 1265 |
|
| 1266 |
IWL_DEBUG_SCAN(mld, |
| 1267 |
"Sending scheduled scan profile config (n_match_sets=%u)\n", |
| 1268 |
req->n_match_sets); |
| 1269 |
|
| 1270 |
ret = iwl_mld_send_cmd(mld, &hcmd); |
| 1271 |
|
| 1272 |
kfree(cmd); |
| 1273 |
|
| 1274 |
return ret; |
| 1275 |
} |
| 1276 |
|
| 1277 |
static int |
| 1278 |
iwl_mld_sched_scan_handle_non_psc_channels(struct iwl_mld_scan_params *params, |
| 1279 |
bool *non_psc_included) |
| 1280 |
{ |
| 1281 |
int i, j; |
| 1282 |
|
| 1283 |
*non_psc_included = false; |
| 1284 |
/* for 6 GHZ band only PSC channels need to be added */ |
| 1285 |
for (i = 0; i < params->n_channels; i++) { |
| 1286 |
struct ieee80211_channel *channel = params->channels[i]; |
| 1287 |
|
| 1288 |
if (channel->band == NL80211_BAND_6GHZ && |
| 1289 |
!cfg80211_channel_is_psc(channel)) { |
| 1290 |
*non_psc_included = true; |
| 1291 |
break; |
| 1292 |
} |
| 1293 |
} |
| 1294 |
|
| 1295 |
if (!*non_psc_included) |
| 1296 |
return 0; |
| 1297 |
|
| 1298 |
params->channels = |
| 1299 |
kmemdup(params->channels, |
| 1300 |
sizeof(params->channels[0]) * params->n_channels, |
| 1301 |
GFP_KERNEL); |
| 1302 |
if (!params->channels) |
| 1303 |
return -ENOMEM; |
| 1304 |
|
| 1305 |
for (i = j = 0; i < params->n_channels; i++) { |
| 1306 |
if (params->channels[i]->band == NL80211_BAND_6GHZ && |
| 1307 |
!cfg80211_channel_is_psc(params->channels[i])) |
| 1308 |
continue; |
| 1309 |
params->channels[j++] = params->channels[i]; |
| 1310 |
} |
| 1311 |
|
| 1312 |
params->n_channels = j; |
| 1313 |
|
| 1314 |
return 0; |
| 1315 |
} |
| 1316 |
|
| 1317 |
static void |
| 1318 |
iwl_mld_scan_6ghz_passive_scan(struct iwl_mld *mld, |
| 1319 |
struct iwl_mld_scan_params *params, |
| 1320 |
struct ieee80211_vif *vif) |
| 1321 |
{ |
| 1322 |
struct ieee80211_supported_band *sband = |
| 1323 |
&mld->nvm_data->bands[NL80211_BAND_6GHZ]; |
| 1324 |
u32 n_disabled, i; |
| 1325 |
|
| 1326 |
params->enable_6ghz_passive = false; |
| 1327 |
|
| 1328 |
/* 6 GHz passive scan may be enabled in the first 2.4 GHz/5 GHz scan |
| 1329 |
* phase to discover geo location if no AP's are found. Skip it when |
| 1330 |
* we're in the 6 GHz scan phase. |
| 1331 |
*/ |
| 1332 |
if (params->scan_6ghz) |
| 1333 |
return; |
| 1334 |
|
| 1335 |
/* 6 GHz passive scan allowed only on station interface */ |
| 1336 |
if (vif->type != NL80211_IFTYPE_STATION) { |
| 1337 |
IWL_DEBUG_SCAN(mld, |
| 1338 |
"6GHz passive scan: not station interface\n"); |
| 1339 |
return; |
| 1340 |
} |
| 1341 |
|
| 1342 |
/* 6 GHz passive scan is allowed in a defined time interval following |
| 1343 |
* HW reset or resume flow, or while not associated and a large |
| 1344 |
* interval has passed since the last 6 GHz passive scan. |
| 1345 |
*/ |
| 1346 |
if ((vif->cfg.assoc || |
| 1347 |
time_after(mld->scan.last_6ghz_passive_jiffies + |
| 1348 |
(IWL_MLD_6GHZ_PASSIVE_SCAN_TIMEOUT * HZ), jiffies)) && |
| 1349 |
(time_before(mld->scan.last_start_time_jiffies + |
| 1350 |
(IWL_MLD_6GHZ_PASSIVE_SCAN_ASSOC_TIMEOUT * HZ), |
| 1351 |
jiffies))) { |
| 1352 |
IWL_DEBUG_SCAN(mld, "6GHz passive scan: %s\n", |
| 1353 |
vif->cfg.assoc ? "associated" : |
| 1354 |
"timeout did not expire"); |
| 1355 |
return; |
| 1356 |
} |
| 1357 |
|
| 1358 |
/* not enough channels in the regular scan request */ |
| 1359 |
if (params->n_channels < IWL_MLD_6GHZ_PASSIVE_SCAN_MIN_CHANS) { |
| 1360 |
IWL_DEBUG_SCAN(mld, |
| 1361 |
"6GHz passive scan: not enough channels %d\n", |
| 1362 |
params->n_channels); |
| 1363 |
return; |
| 1364 |
} |
| 1365 |
|
| 1366 |
for (i = 0; i < params->n_ssids; i++) { |
| 1367 |
if (!params->ssids[i].ssid_len) |
| 1368 |
break; |
| 1369 |
} |
| 1370 |
|
| 1371 |
/* not a wildcard scan, so cannot enable passive 6 GHz scan */ |
| 1372 |
if (i == params->n_ssids) { |
| 1373 |
IWL_DEBUG_SCAN(mld, |
| 1374 |
"6GHz passive scan: no wildcard SSID\n"); |
| 1375 |
return; |
| 1376 |
} |
| 1377 |
|
| 1378 |
if (!sband || !sband->n_channels) { |
| 1379 |
IWL_DEBUG_SCAN(mld, |
| 1380 |
"6GHz passive scan: no 6GHz channels\n"); |
| 1381 |
return; |
| 1382 |
} |
| 1383 |
|
| 1384 |
for (i = 0, n_disabled = 0; i < sband->n_channels; i++) { |
| 1385 |
if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED)) |
| 1386 |
n_disabled++; |
| 1387 |
} |
| 1388 |
|
| 1389 |
/* Not all the 6 GHz channels are disabled, so no need for 6 GHz |
| 1390 |
* passive scan |
| 1391 |
*/ |
| 1392 |
if (n_disabled != sband->n_channels) { |
| 1393 |
IWL_DEBUG_SCAN(mld, |
| 1394 |
"6GHz passive scan: 6GHz channels enabled\n"); |
| 1395 |
return; |
| 1396 |
} |
| 1397 |
|
| 1398 |
/* all conditions to enable 6 GHz passive scan are satisfied */ |
| 1399 |
IWL_DEBUG_SCAN(mld, "6GHz passive scan: can be enabled\n"); |
| 1400 |
params->enable_6ghz_passive = true; |
| 1401 |
} |
| 1402 |
|
| 1403 |
static void |
| 1404 |
iwl_mld_scan_set_link_id(struct iwl_mld *mld, struct ieee80211_vif *vif, |
| 1405 |
struct iwl_mld_scan_params *params, |
| 1406 |
s8 tsf_report_link_id, |
| 1407 |
enum iwl_mld_scan_status scan_status) |
| 1408 |
{ |
| 1409 |
struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif); |
| 1410 |
struct iwl_mld_link *link; |
| 1411 |
|
| 1412 |
if (tsf_report_link_id < 0) { |
| 1413 |
if (vif->active_links) |
| 1414 |
tsf_report_link_id = __ffs(vif->active_links); |
| 1415 |
else |
| 1416 |
tsf_report_link_id = 0; |
| 1417 |
} |
| 1418 |
|
| 1419 |
link = iwl_mld_link_dereference_check(mld_vif, tsf_report_link_id); |
| 1420 |
if (!WARN_ON(!link)) { |
| 1421 |
params->fw_link_id = link->fw_id; |
| 1422 |
/* we to store fw_link_id only for regular scan, |
| 1423 |
* and use it in scan complete notif |
| 1424 |
*/ |
| 1425 |
if (scan_status == IWL_MLD_SCAN_REGULAR) |
| 1426 |
mld->scan.fw_link_id = link->fw_id; |
| 1427 |
} else { |
| 1428 |
mld->scan.fw_link_id = IWL_MLD_INVALID_FW_ID; |
| 1429 |
params->fw_link_id = IWL_MLD_INVALID_FW_ID; |
| 1430 |
} |
| 1431 |
} |
| 1432 |
|
| 1433 |
static int |
| 1434 |
_iwl_mld_single_scan_start(struct iwl_mld *mld, struct ieee80211_vif *vif, |
| 1435 |
struct cfg80211_scan_request *req, |
| 1436 |
struct ieee80211_scan_ies *ies, |
| 1437 |
enum iwl_mld_scan_status scan_status) |
| 1438 |
{ |
| 1439 |
struct iwl_host_cmd hcmd = { |
| 1440 |
.id = WIDE_ID(LONG_GROUP, SCAN_REQ_UMAC), |
| 1441 |
.len = { mld->scan.cmd_size, }, |
| 1442 |
.data = { mld->scan.cmd, }, |
| 1443 |
.dataflags = { IWL_HCMD_DFL_NOCOPY, }, |
| 1444 |
}; |
| 1445 |
struct iwl_mld_scan_iter_data scan_iter_data = { |
| 1446 |
.current_vif = vif, |
| 1447 |
}; |
| 1448 |
struct cfg80211_sched_scan_plan scan_plan = {.iterations = 1}; |
| 1449 |
struct iwl_mld_scan_params params = {}; |
| 1450 |
int ret, uid; |
| 1451 |
|
| 1452 |
/* we should have failed registration if scan_cmd was NULL */ |
| 1453 |
if (WARN_ON(!mld->scan.cmd)) |
| 1454 |
return -ENOMEM; |
| 1455 |
|
| 1456 |
if (!iwl_mld_scan_fits(mld, req->n_ssids, ies, req->n_channels)) |
| 1457 |
return -ENOBUFS; |
| 1458 |
|
| 1459 |
ieee80211_iterate_active_interfaces_mtx(mld->hw, |
| 1460 |
IEEE80211_IFACE_ITER_NORMAL, |
| 1461 |
iwl_mld_scan_iterator, |
| 1462 |
&scan_iter_data); |
| 1463 |
|
| 1464 |
params.type = iwl_mld_get_scan_type(mld, vif, &scan_iter_data); |
| 1465 |
params.n_ssids = req->n_ssids; |
| 1466 |
params.flags = req->flags; |
| 1467 |
params.n_channels = req->n_channels; |
| 1468 |
params.delay = 0; |
| 1469 |
params.ssids = req->ssids; |
| 1470 |
params.channels = req->channels; |
| 1471 |
params.mac_addr = req->mac_addr; |
| 1472 |
params.mac_addr_mask = req->mac_addr_mask; |
| 1473 |
params.no_cck = req->no_cck; |
| 1474 |
params.pass_all = true; |
| 1475 |
params.n_match_sets = 0; |
| 1476 |
params.match_sets = NULL; |
| 1477 |
params.scan_plans = &scan_plan; |
| 1478 |
params.n_scan_plans = 1; |
| 1479 |
|
| 1480 |
params.n_6ghz_params = req->n_6ghz_params; |
| 1481 |
params.scan_6ghz_params = req->scan_6ghz_params; |
| 1482 |
params.scan_6ghz = req->scan_6ghz; |
| 1483 |
|
| 1484 |
ether_addr_copy(params.bssid, req->bssid); |
| 1485 |
/* TODO: CDB - per-band flag */ |
| 1486 |
params.respect_p2p_go = |
| 1487 |
iwl_mld_get_respect_p2p_go(mld, vif, |
| 1488 |
scan_iter_data.global_low_latency); |
| 1489 |
|
| 1490 |
if (req->duration) |
| 1491 |
params.iter_notif = true; |
| 1492 |
|
| 1493 |
iwl_mld_scan_set_link_id(mld, vif, ¶ms, req->tsf_report_link_id, |
| 1494 |
scan_status); |
| 1495 |
|
| 1496 |
iwl_mld_scan_build_probe_req(mld, vif, ies, ¶ms); |
| 1497 |
|
| 1498 |
iwl_mld_scan_6ghz_passive_scan(mld, ¶ms, vif); |
| 1499 |
|
| 1500 |
uid = iwl_mld_scan_build_cmd(mld, vif, ¶ms, scan_status, |
| 1501 |
scan_iter_data.global_low_latency); |
| 1502 |
if (uid < 0) |
| 1503 |
return uid; |
| 1504 |
|
| 1505 |
ret = iwl_mld_send_cmd(mld, &hcmd); |
| 1506 |
if (ret) { |
| 1507 |
IWL_ERR(mld, "Scan failed! ret %d\n", ret); |
| 1508 |
return ret; |
| 1509 |
} |
| 1510 |
|
| 1511 |
IWL_DEBUG_SCAN(mld, "Scan request send success: status=%u, uid=%u\n", |
| 1512 |
scan_status, uid); |
| 1513 |
|
| 1514 |
mld->scan.uid_status[uid] = scan_status; |
| 1515 |
mld->scan.status |= scan_status; |
| 1516 |
|
| 1517 |
if (params.enable_6ghz_passive) |
| 1518 |
mld->scan.last_6ghz_passive_jiffies = jiffies; |
| 1519 |
|
| 1520 |
return 0; |
| 1521 |
} |
| 1522 |
|
| 1523 |
static int |
| 1524 |
iwl_mld_scan_send_abort_cmd_status(struct iwl_mld *mld, int uid, u32 *status) |
| 1525 |
{ |
| 1526 |
struct iwl_umac_scan_abort abort_cmd = { |
| 1527 |
.uid = cpu_to_le32(uid), |
| 1528 |
}; |
| 1529 |
struct iwl_host_cmd cmd = { |
| 1530 |
.id = WIDE_ID(LONG_GROUP, SCAN_ABORT_UMAC), |
| 1531 |
.flags = CMD_WANT_SKB, |
| 1532 |
.data = { &abort_cmd }, |
| 1533 |
.len[0] = sizeof(abort_cmd), |
| 1534 |
}; |
| 1535 |
struct iwl_rx_packet *pkt; |
| 1536 |
struct iwl_cmd_response *resp; |
| 1537 |
u32 resp_len; |
| 1538 |
int ret; |
| 1539 |
|
| 1540 |
ret = iwl_mld_send_cmd(mld, &cmd); |
| 1541 |
if (ret) |
| 1542 |
return ret; |
| 1543 |
|
| 1544 |
pkt = cmd.resp_pkt; |
| 1545 |
|
| 1546 |
resp_len = iwl_rx_packet_payload_len(pkt); |
| 1547 |
if (IWL_FW_CHECK(mld, resp_len != sizeof(*resp), |
| 1548 |
"Scan Abort: unexpected response length %d\n", |
| 1549 |
resp_len)) { |
| 1550 |
ret = -EIO; |
| 1551 |
goto out; |
| 1552 |
} |
| 1553 |
|
| 1554 |
resp = (void *)pkt->data; |
| 1555 |
*status = le32_to_cpu(resp->status); |
| 1556 |
|
| 1557 |
out: |
| 1558 |
iwl_free_resp(&cmd); |
| 1559 |
return ret; |
| 1560 |
} |
| 1561 |
|
| 1562 |
static int |
| 1563 |
iwl_mld_scan_abort(struct iwl_mld *mld, int type, int uid, bool *wait) |
| 1564 |
{ |
| 1565 |
enum iwl_umac_scan_abort_status status; |
| 1566 |
int ret; |
| 1567 |
|
| 1568 |
*wait = true; |
| 1569 |
|
| 1570 |
IWL_DEBUG_SCAN(mld, "Sending scan abort, uid %u\n", uid); |
| 1571 |
|
| 1572 |
ret = iwl_mld_scan_send_abort_cmd_status(mld, uid, &status); |
| 1573 |
|
| 1574 |
IWL_DEBUG_SCAN(mld, "Scan abort: ret=%d status=%u\n", ret, status); |
| 1575 |
|
| 1576 |
/* We don't need to wait to scan complete in the following cases: |
| 1577 |
* 1. Driver failed to send the scan abort cmd. |
| 1578 |
* 2. The FW is no longer familiar with the scan that needs to be |
| 1579 |
* stopped. It is expected that the scan complete notification was |
| 1580 |
* already received but not yet processed. |
| 1581 |
* |
| 1582 |
* In both cases the flow should continue similar to the case that the |
| 1583 |
* scan was really aborted. |
| 1584 |
*/ |
| 1585 |
if (ret || status == IWL_UMAC_SCAN_ABORT_STATUS_NOT_FOUND) |
| 1586 |
*wait = false; |
| 1587 |
|
| 1588 |
return ret; |
| 1589 |
} |
| 1590 |
|
| 1591 |
static int |
| 1592 |
iwl_mld_scan_stop_wait(struct iwl_mld *mld, int type, int uid) |
| 1593 |
{ |
| 1594 |
struct iwl_notification_wait wait_scan_done; |
| 1595 |
static const u16 scan_comp_notif[] = { SCAN_COMPLETE_UMAC }; |
| 1596 |
bool wait = true; |
| 1597 |
int ret; |
| 1598 |
|
| 1599 |
iwl_init_notification_wait(&mld->notif_wait, &wait_scan_done, |
| 1600 |
scan_comp_notif, |
| 1601 |
ARRAY_SIZE(scan_comp_notif), |
| 1602 |
NULL, NULL); |
| 1603 |
|
| 1604 |
IWL_DEBUG_SCAN(mld, "Preparing to stop scan, type=%x\n", type); |
| 1605 |
|
| 1606 |
ret = iwl_mld_scan_abort(mld, type, uid, &wait); |
| 1607 |
if (ret) { |
| 1608 |
IWL_DEBUG_SCAN(mld, "couldn't stop scan type=%d\n", type); |
| 1609 |
goto return_no_wait; |
| 1610 |
} |
| 1611 |
|
| 1612 |
if (!wait) { |
| 1613 |
IWL_DEBUG_SCAN(mld, "no need to wait for scan type=%d\n", type); |
| 1614 |
goto return_no_wait; |
| 1615 |
} |
| 1616 |
|
| 1617 |
return iwl_wait_notification(&mld->notif_wait, &wait_scan_done, HZ); |
| 1618 |
|
| 1619 |
return_no_wait: |
| 1620 |
iwl_remove_notification(&mld->notif_wait, &wait_scan_done); |
| 1621 |
return ret; |
| 1622 |
} |
| 1623 |
|
| 1624 |
int iwl_mld_sched_scan_start(struct iwl_mld *mld, |
| 1625 |
struct ieee80211_vif *vif, |
| 1626 |
struct cfg80211_sched_scan_request *req, |
| 1627 |
struct ieee80211_scan_ies *ies, |
| 1628 |
int type) |
| 1629 |
{ |
| 1630 |
struct iwl_host_cmd hcmd = { |
| 1631 |
.id = WIDE_ID(LONG_GROUP, SCAN_REQ_UMAC), |
| 1632 |
.len = { mld->scan.cmd_size, }, |
| 1633 |
.data = { mld->scan.cmd, }, |
| 1634 |
.dataflags = { IWL_HCMD_DFL_NOCOPY, }, |
| 1635 |
}; |
| 1636 |
struct iwl_mld_scan_params params = {}; |
| 1637 |
struct iwl_mld_scan_iter_data scan_iter_data = { |
| 1638 |
.current_vif = vif, |
| 1639 |
}; |
| 1640 |
bool non_psc_included = false; |
| 1641 |
int ret, uid; |
| 1642 |
|
| 1643 |
/* we should have failed registration if scan_cmd was NULL */ |
| 1644 |
if (WARN_ON(!mld->scan.cmd)) |
| 1645 |
return -ENOMEM; |
| 1646 |
|
| 1647 |
/* FW supports only a single periodic scan */ |
| 1648 |
if (mld->scan.status & (IWL_MLD_SCAN_SCHED | IWL_MLD_SCAN_NETDETECT)) |
| 1649 |
return -EBUSY; |
| 1650 |
|
| 1651 |
ieee80211_iterate_active_interfaces_mtx(mld->hw, |
| 1652 |
IEEE80211_IFACE_ITER_NORMAL, |
| 1653 |
iwl_mld_scan_iterator, |
| 1654 |
&scan_iter_data); |
| 1655 |
|
| 1656 |
params.type = iwl_mld_get_scan_type(mld, vif, &scan_iter_data); |
| 1657 |
params.flags = req->flags; |
| 1658 |
params.n_ssids = req->n_ssids; |
| 1659 |
params.ssids = req->ssids; |
| 1660 |
params.n_channels = req->n_channels; |
| 1661 |
params.channels = req->channels; |
| 1662 |
params.mac_addr = req->mac_addr; |
| 1663 |
params.mac_addr_mask = req->mac_addr_mask; |
| 1664 |
params.no_cck = false; |
| 1665 |
params.pass_all = iwl_mld_scan_pass_all(mld, req); |
| 1666 |
params.n_match_sets = req->n_match_sets; |
| 1667 |
params.match_sets = req->match_sets; |
| 1668 |
params.n_scan_plans = req->n_scan_plans; |
| 1669 |
params.scan_plans = req->scan_plans; |
| 1670 |
/* TODO: CDB - per-band flag */ |
| 1671 |
params.respect_p2p_go = |
| 1672 |
iwl_mld_get_respect_p2p_go(mld, vif, |
| 1673 |
scan_iter_data.global_low_latency); |
| 1674 |
|
| 1675 |
/* UMAC scan supports up to 16-bit delays, trim it down to 16-bits */ |
| 1676 |
params.delay = req->delay > U16_MAX ? U16_MAX : req->delay; |
| 1677 |
|
| 1678 |
eth_broadcast_addr(params.bssid); |
| 1679 |
|
| 1680 |
ret = iwl_mld_config_sched_scan_profiles(mld, req); |
| 1681 |
if (ret) |
| 1682 |
return ret; |
| 1683 |
|
| 1684 |
iwl_mld_scan_build_probe_req(mld, vif, ies, ¶ms); |
| 1685 |
|
| 1686 |
ret = iwl_mld_sched_scan_handle_non_psc_channels(¶ms, |
| 1687 |
&non_psc_included); |
| 1688 |
if (ret) |
| 1689 |
goto out; |
| 1690 |
|
| 1691 |
if (!iwl_mld_scan_fits(mld, req->n_ssids, ies, params.n_channels)) { |
| 1692 |
ret = -ENOBUFS; |
| 1693 |
goto out; |
| 1694 |
} |
| 1695 |
|
| 1696 |
uid = iwl_mld_scan_build_cmd(mld, vif, ¶ms, type, |
| 1697 |
scan_iter_data.global_low_latency); |
| 1698 |
if (uid < 0) { |
| 1699 |
ret = uid; |
| 1700 |
goto out; |
| 1701 |
} |
| 1702 |
|
| 1703 |
ret = iwl_mld_send_cmd(mld, &hcmd); |
| 1704 |
if (!ret) { |
| 1705 |
IWL_DEBUG_SCAN(mld, |
| 1706 |
"Sched scan request send success: type=%u, uid=%u\n", |
| 1707 |
type, uid); |
| 1708 |
mld->scan.uid_status[uid] = type; |
| 1709 |
mld->scan.status |= type; |
| 1710 |
} else { |
| 1711 |
IWL_ERR(mld, "Sched scan failed! ret %d\n", ret); |
| 1712 |
mld->scan.pass_all_sched_res = SCHED_SCAN_PASS_ALL_STATE_DISABLED; |
| 1713 |
} |
| 1714 |
|
| 1715 |
out: |
| 1716 |
if (non_psc_included) |
| 1717 |
kfree(params.channels); |
| 1718 |
return ret; |
| 1719 |
} |
| 1720 |
|
| 1721 |
int iwl_mld_scan_stop(struct iwl_mld *mld, int type, bool notify) |
| 1722 |
{ |
| 1723 |
int uid, ret; |
| 1724 |
|
| 1725 |
IWL_DEBUG_SCAN(mld, |
| 1726 |
"Request to stop scan: type=0x%x, status=0x%x\n", |
| 1727 |
type, mld->scan.status); |
| 1728 |
|
| 1729 |
if (!(mld->scan.status & type)) |
| 1730 |
return 0; |
| 1731 |
|
| 1732 |
uid = iwl_mld_scan_uid_by_status(mld, type); |
| 1733 |
/* must be valid, we just checked it's running */ |
| 1734 |
if (WARN_ON_ONCE(uid < 0)) |
| 1735 |
return uid; |
| 1736 |
|
| 1737 |
ret = iwl_mld_scan_stop_wait(mld, type, uid); |
| 1738 |
if (ret) |
| 1739 |
IWL_DEBUG_SCAN(mld, "Failed to stop scan\n"); |
| 1740 |
|
| 1741 |
/* Clear the scan status so the next scan requests will |
| 1742 |
* succeed and mark the scan as stopping, so that the Rx |
| 1743 |
* handler doesn't do anything, as the scan was stopped from |
| 1744 |
* above. Also remove the handler to not notify mac80211 |
| 1745 |
* erroneously after a new scan starts, for example. |
| 1746 |
*/ |
| 1747 |
mld->scan.status &= ~type; |
| 1748 |
mld->scan.uid_status[uid] = IWL_MLD_SCAN_NONE; |
| 1749 |
iwl_mld_cancel_notifications_of_object(mld, IWL_MLD_OBJECT_TYPE_SCAN, |
| 1750 |
uid); |
| 1751 |
|
| 1752 |
if (type == IWL_MLD_SCAN_REGULAR) { |
| 1753 |
if (notify) { |
| 1754 |
struct cfg80211_scan_info info = { |
| 1755 |
.aborted = true, |
| 1756 |
}; |
| 1757 |
|
| 1758 |
ieee80211_scan_completed(mld->hw, &info); |
| 1759 |
} |
| 1760 |
} else if (notify) { |
| 1761 |
ieee80211_sched_scan_stopped(mld->hw); |
| 1762 |
mld->scan.pass_all_sched_res = SCHED_SCAN_PASS_ALL_STATE_DISABLED; |
| 1763 |
} |
| 1764 |
|
| 1765 |
return ret; |
| 1766 |
} |
| 1767 |
|
| 1768 |
int iwl_mld_regular_scan_start(struct iwl_mld *mld, struct ieee80211_vif *vif, |
| 1769 |
struct cfg80211_scan_request *req, |
| 1770 |
struct ieee80211_scan_ies *ies) |
| 1771 |
{ |
| 1772 |
/* Clear survey data when starting the first part of a regular scan */ |
| 1773 |
if (req->first_part && mld->channel_survey) |
| 1774 |
memset(mld->channel_survey->channels, 0, |
| 1775 |
sizeof(mld->channel_survey->channels[0]) * |
| 1776 |
mld->channel_survey->n_channels); |
| 1777 |
|
| 1778 |
if (vif->type == NL80211_IFTYPE_P2P_DEVICE) |
| 1779 |
iwl_mld_emlsr_block_tmp_non_bss(mld); |
| 1780 |
|
| 1781 |
return _iwl_mld_single_scan_start(mld, vif, req, ies, |
| 1782 |
IWL_MLD_SCAN_REGULAR); |
| 1783 |
} |
| 1784 |
|
| 1785 |
static void iwl_mld_int_mlo_scan_start(struct iwl_mld *mld, |
| 1786 |
struct ieee80211_vif *vif, |
| 1787 |
struct ieee80211_channel **channels, |
| 1788 |
size_t n_channels) |
| 1789 |
{ |
| 1790 |
struct cfg80211_scan_request *req __free(kfree) = NULL; |
| 1791 |
struct ieee80211_scan_ies ies = {}; |
| 1792 |
size_t size; |
| 1793 |
int ret; |
| 1794 |
|
| 1795 |
IWL_DEBUG_SCAN(mld, "Starting Internal MLO scan: n_channels=%zu\n", |
| 1796 |
n_channels); |
| 1797 |
|
| 1798 |
size = struct_size(req, channels, n_channels); |
| 1799 |
req = kzalloc(size, GFP_KERNEL); |
| 1800 |
if (!req) |
| 1801 |
return; |
| 1802 |
|
| 1803 |
/* set the requested channels */ |
| 1804 |
for (int i = 0; i < n_channels; i++) |
| 1805 |
req->channels[i] = channels[i]; |
| 1806 |
|
| 1807 |
req->n_channels = n_channels; |
| 1808 |
|
| 1809 |
/* set the rates */ |
| 1810 |
for (int i = 0; i < NUM_NL80211_BANDS; i++) |
| 1811 |
if (mld->wiphy->bands[i]) |
| 1812 |
req->rates[i] = |
| 1813 |
(1 << mld->wiphy->bands[i]->n_bitrates) - 1; |
| 1814 |
|
| 1815 |
req->wdev = ieee80211_vif_to_wdev(vif); |
| 1816 |
req->wiphy = mld->wiphy; |
| 1817 |
req->scan_start = jiffies; |
| 1818 |
req->tsf_report_link_id = -1; |
| 1819 |
|
| 1820 |
ret = _iwl_mld_single_scan_start(mld, vif, req, &ies, |
| 1821 |
IWL_MLD_SCAN_INT_MLO); |
| 1822 |
|
| 1823 |
IWL_DEBUG_SCAN(mld, "Internal MLO scan: ret=%d\n", ret); |
| 1824 |
} |
| 1825 |
|
| 1826 |
#define IWL_MLD_MLO_SCAN_BLOCKOUT_TIME 5 /* seconds */ |
| 1827 |
|
| 1828 |
void iwl_mld_int_mlo_scan(struct iwl_mld *mld, struct ieee80211_vif *vif) |
| 1829 |
{ |
| 1830 |
struct ieee80211_channel *channels[IEEE80211_MLD_MAX_NUM_LINKS]; |
| 1831 |
struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif); |
| 1832 |
unsigned long usable_links = ieee80211_vif_usable_links(vif); |
| 1833 |
size_t n_channels = 0; |
| 1834 |
u8 link_id; |
| 1835 |
|
| 1836 |
lockdep_assert_wiphy(mld->wiphy); |
| 1837 |
|
| 1838 |
if (!IWL_MLD_AUTO_EML_ENABLE || !vif->cfg.assoc || |
| 1839 |
!ieee80211_vif_is_mld(vif) || hweight16(vif->valid_links) == 1) |
| 1840 |
return; |
| 1841 |
|
| 1842 |
if (mld->scan.status & IWL_MLD_SCAN_INT_MLO) { |
| 1843 |
IWL_DEBUG_SCAN(mld, "Internal MLO scan is already running\n"); |
| 1844 |
return; |
| 1845 |
} |
| 1846 |
|
| 1847 |
if (mld_vif->last_link_activation_time > ktime_get_boottime_seconds() - |
| 1848 |
IWL_MLD_MLO_SCAN_BLOCKOUT_TIME) { |
| 1849 |
/* timing doesn't matter much, so use the blockout time */ |
| 1850 |
wiphy_delayed_work_queue(mld->wiphy, |
| 1851 |
&mld_vif->mlo_scan_start_wk, |
| 1852 |
IWL_MLD_MLO_SCAN_BLOCKOUT_TIME); |
| 1853 |
return; |
| 1854 |
} |
| 1855 |
|
| 1856 |
for_each_set_bit(link_id, &usable_links, IEEE80211_MLD_MAX_NUM_LINKS) { |
| 1857 |
struct ieee80211_bss_conf *link_conf = |
| 1858 |
link_conf_dereference_check(vif, link_id); |
| 1859 |
|
| 1860 |
if (WARN_ON_ONCE(!link_conf)) |
| 1861 |
continue; |
| 1862 |
|
| 1863 |
channels[n_channels++] = link_conf->chanreq.oper.chan; |
| 1864 |
} |
| 1865 |
|
| 1866 |
if (!n_channels) |
| 1867 |
return; |
| 1868 |
|
| 1869 |
iwl_mld_int_mlo_scan_start(mld, vif, channels, n_channels); |
| 1870 |
} |
| 1871 |
|
| 1872 |
void iwl_mld_handle_scan_iter_complete_notif(struct iwl_mld *mld, |
| 1873 |
struct iwl_rx_packet *pkt) |
| 1874 |
{ |
| 1875 |
struct iwl_umac_scan_iter_complete_notif *notif = (void *)pkt->data; |
| 1876 |
u32 uid = __le32_to_cpu(notif->uid); |
| 1877 |
|
| 1878 |
if (IWL_FW_CHECK(mld, uid >= ARRAY_SIZE(mld->scan.uid_status), |
| 1879 |
"FW reports out-of-range scan UID %d\n", uid)) |
| 1880 |
return; |
| 1881 |
|
| 1882 |
if (mld->scan.uid_status[uid] == IWL_MLD_SCAN_REGULAR) |
| 1883 |
mld->scan.start_tsf = le64_to_cpu(notif->start_tsf); |
| 1884 |
|
| 1885 |
IWL_DEBUG_SCAN(mld, |
| 1886 |
"UMAC Scan iteration complete: status=0x%x scanned_channels=%d\n", |
| 1887 |
notif->status, notif->scanned_channels); |
| 1888 |
|
| 1889 |
if (mld->scan.pass_all_sched_res == SCHED_SCAN_PASS_ALL_STATE_FOUND) { |
| 1890 |
IWL_DEBUG_SCAN(mld, "Pass all scheduled scan results found\n"); |
| 1891 |
ieee80211_sched_scan_results(mld->hw); |
| 1892 |
mld->scan.pass_all_sched_res = SCHED_SCAN_PASS_ALL_STATE_ENABLED; |
| 1893 |
} |
| 1894 |
|
| 1895 |
IWL_DEBUG_SCAN(mld, |
| 1896 |
"UMAC Scan iteration complete: scan started at %llu (TSF)\n", |
| 1897 |
le64_to_cpu(notif->start_tsf)); |
| 1898 |
} |
| 1899 |
|
| 1900 |
void iwl_mld_handle_match_found_notif(struct iwl_mld *mld, |
| 1901 |
struct iwl_rx_packet *pkt) |
| 1902 |
{ |
| 1903 |
IWL_DEBUG_SCAN(mld, "Scheduled scan results\n"); |
| 1904 |
ieee80211_sched_scan_results(mld->hw); |
| 1905 |
} |
| 1906 |
|
| 1907 |
void iwl_mld_handle_scan_start_notif(struct iwl_mld *mld, |
| 1908 |
struct iwl_rx_packet *pkt) |
| 1909 |
{ |
| 1910 |
struct iwl_umac_scan_complete *notif = (void *)pkt->data; |
| 1911 |
u32 uid = le32_to_cpu(notif->uid); |
| 1912 |
|
| 1913 |
if (IWL_FW_CHECK(mld, uid >= ARRAY_SIZE(mld->scan.uid_status), |
| 1914 |
"FW reports out-of-range scan UID %d\n", uid)) |
| 1915 |
return; |
| 1916 |
|
| 1917 |
if (IWL_FW_CHECK(mld, !(mld->scan.uid_status[uid] & mld->scan.status), |
| 1918 |
"FW reports scan UID %d we didn't trigger\n", uid)) |
| 1919 |
return; |
| 1920 |
|
| 1921 |
IWL_DEBUG_SCAN(mld, "Scan started: uid=%u type=%u\n", uid, |
| 1922 |
mld->scan.uid_status[uid]); |
| 1923 |
if (IWL_FW_CHECK(mld, mld->scan.uid_status[uid] != IWL_MLD_SCAN_INT_MLO, |
| 1924 |
"FW reports scan start notification %d we didn't trigger\n", |
| 1925 |
mld->scan.uid_status[uid])) |
| 1926 |
return; |
| 1927 |
|
| 1928 |
mld->scan.last_mlo_scan_start_time = ktime_get_boottime_ns(); |
| 1929 |
} |
| 1930 |
|
| 1931 |
void iwl_mld_handle_scan_complete_notif(struct iwl_mld *mld, |
| 1932 |
struct iwl_rx_packet *pkt) |
| 1933 |
{ |
| 1934 |
struct iwl_umac_scan_complete *notif = (void *)pkt->data; |
| 1935 |
bool aborted = (notif->status == IWL_SCAN_OFFLOAD_ABORTED); |
| 1936 |
u32 uid = __le32_to_cpu(notif->uid); |
| 1937 |
|
| 1938 |
if (IWL_FW_CHECK(mld, uid >= ARRAY_SIZE(mld->scan.uid_status), |
| 1939 |
"FW reports out-of-range scan UID %d\n", uid)) |
| 1940 |
return; |
| 1941 |
|
| 1942 |
IWL_DEBUG_SCAN(mld, |
| 1943 |
"Scan completed: uid=%u type=%u, status=%s, EBS=%s\n", |
| 1944 |
uid, mld->scan.uid_status[uid], |
| 1945 |
notif->status == IWL_SCAN_OFFLOAD_COMPLETED ? |
| 1946 |
"completed" : "aborted", |
| 1947 |
iwl_mld_scan_ebs_status_str(notif->ebs_status)); |
| 1948 |
IWL_DEBUG_SCAN(mld, "Scan completed: scan_status=0x%x\n", |
| 1949 |
mld->scan.status); |
| 1950 |
IWL_DEBUG_SCAN(mld, |
| 1951 |
"Scan completed: line=%u, iter=%u, elapsed time=%u\n", |
| 1952 |
notif->last_schedule, notif->last_iter, |
| 1953 |
__le32_to_cpu(notif->time_from_last_iter)); |
| 1954 |
|
| 1955 |
if (IWL_FW_CHECK(mld, !(mld->scan.uid_status[uid] & mld->scan.status), |
| 1956 |
"FW reports scan UID %d we didn't trigger\n", uid)) |
| 1957 |
return; |
| 1958 |
|
| 1959 |
/* if the scan is already stopping, we don't need to notify mac80211 */ |
| 1960 |
if (mld->scan.uid_status[uid] == IWL_MLD_SCAN_REGULAR) { |
| 1961 |
struct cfg80211_scan_info info = { |
| 1962 |
.aborted = aborted, |
| 1963 |
.scan_start_tsf = mld->scan.start_tsf, |
| 1964 |
}; |
| 1965 |
int fw_link_id = mld->scan.fw_link_id; |
| 1966 |
struct ieee80211_bss_conf *link_conf = NULL; |
| 1967 |
|
| 1968 |
if (fw_link_id != IWL_MLD_INVALID_FW_ID) |
| 1969 |
link_conf = |
| 1970 |
wiphy_dereference(mld->wiphy, |
| 1971 |
mld->fw_id_to_bss_conf[fw_link_id]); |
| 1972 |
|
| 1973 |
/* It is possible that by the time the scan is complete the |
| 1974 |
* link was already removed and is not valid. |
| 1975 |
*/ |
| 1976 |
if (link_conf) |
| 1977 |
ether_addr_copy(info.tsf_bssid, link_conf->bssid); |
| 1978 |
else |
| 1979 |
IWL_DEBUG_SCAN(mld, "Scan link is no longer valid\n"); |
| 1980 |
|
| 1981 |
ieee80211_scan_completed(mld->hw, &info); |
| 1982 |
|
| 1983 |
/* Scan is over, we can check again the tpt counters */ |
| 1984 |
iwl_mld_stop_ignoring_tpt_updates(mld); |
| 1985 |
} else if (mld->scan.uid_status[uid] == IWL_MLD_SCAN_SCHED) { |
| 1986 |
ieee80211_sched_scan_stopped(mld->hw); |
| 1987 |
mld->scan.pass_all_sched_res = SCHED_SCAN_PASS_ALL_STATE_DISABLED; |
| 1988 |
} else if (mld->scan.uid_status[uid] == IWL_MLD_SCAN_INT_MLO) { |
| 1989 |
IWL_DEBUG_SCAN(mld, "Internal MLO scan completed\n"); |
| 1990 |
|
| 1991 |
/* |
| 1992 |
* We limit link selection to internal MLO scans as otherwise |
| 1993 |
* we do not know whether all channels were covered. |
| 1994 |
*/ |
| 1995 |
iwl_mld_select_links(mld); |
| 1996 |
} |
| 1997 |
|
| 1998 |
mld->scan.status &= ~mld->scan.uid_status[uid]; |
| 1999 |
|
| 2000 |
IWL_DEBUG_SCAN(mld, "Scan completed: after update: scan_status=0x%x\n", |
| 2001 |
mld->scan.status); |
| 2002 |
|
| 2003 |
mld->scan.uid_status[uid] = IWL_MLD_SCAN_NONE; |
| 2004 |
|
| 2005 |
if (notif->ebs_status != IWL_SCAN_EBS_SUCCESS && |
| 2006 |
notif->ebs_status != IWL_SCAN_EBS_INACTIVE) |
| 2007 |
mld->scan.last_ebs_failed = true; |
| 2008 |
} |
| 2009 |
|
| 2010 |
/* This function is used in nic restart flow, to inform mac80211 about scans |
| 2011 |
* that were aborted by restart flow or by an assert. |
| 2012 |
*/ |
| 2013 |
void iwl_mld_report_scan_aborted(struct iwl_mld *mld) |
| 2014 |
{ |
| 2015 |
int uid; |
| 2016 |
|
| 2017 |
uid = iwl_mld_scan_uid_by_status(mld, IWL_MLD_SCAN_REGULAR); |
| 2018 |
if (uid >= 0) { |
| 2019 |
struct cfg80211_scan_info info = { |
| 2020 |
.aborted = true, |
| 2021 |
}; |
| 2022 |
|
| 2023 |
ieee80211_scan_completed(mld->hw, &info); |
| 2024 |
mld->scan.uid_status[uid] = IWL_MLD_SCAN_NONE; |
| 2025 |
} |
| 2026 |
|
| 2027 |
uid = iwl_mld_scan_uid_by_status(mld, IWL_MLD_SCAN_SCHED); |
| 2028 |
if (uid >= 0) { |
| 2029 |
mld->scan.pass_all_sched_res = SCHED_SCAN_PASS_ALL_STATE_DISABLED; |
| 2030 |
mld->scan.uid_status[uid] = IWL_MLD_SCAN_NONE; |
| 2031 |
|
| 2032 |
/* sched scan will be restarted by mac80211 in reconfig. |
| 2033 |
* report to mac80211 that sched scan stopped only if we won't |
| 2034 |
* restart the firmware. |
| 2035 |
*/ |
| 2036 |
if (!iwlwifi_mod_params.fw_restart) |
| 2037 |
ieee80211_sched_scan_stopped(mld->hw); |
| 2038 |
} |
| 2039 |
|
| 2040 |
uid = iwl_mld_scan_uid_by_status(mld, IWL_MLD_SCAN_INT_MLO); |
| 2041 |
if (uid >= 0) { |
| 2042 |
IWL_DEBUG_SCAN(mld, "Internal MLO scan aborted\n"); |
| 2043 |
mld->scan.uid_status[uid] = IWL_MLD_SCAN_NONE; |
| 2044 |
} |
| 2045 |
|
| 2046 |
BUILD_BUG_ON(IWL_MLD_SCAN_NONE != 0); |
| 2047 |
memset(mld->scan.uid_status, 0, sizeof(mld->scan.uid_status)); |
| 2048 |
} |
| 2049 |
|
| 2050 |
int iwl_mld_alloc_scan_cmd(struct iwl_mld *mld) |
| 2051 |
{ |
| 2052 |
u8 scan_cmd_ver = iwl_fw_lookup_cmd_ver(mld->fw, SCAN_REQ_UMAC, |
| 2053 |
IWL_FW_CMD_VER_UNKNOWN); |
| 2054 |
size_t scan_cmd_size; |
| 2055 |
|
| 2056 |
if (scan_cmd_ver == 17) { |
| 2057 |
scan_cmd_size = sizeof(struct iwl_scan_req_umac_v17); |
| 2058 |
} else { |
| 2059 |
IWL_ERR(mld, "Unexpected scan cmd version %d\n", scan_cmd_ver); |
| 2060 |
return -EINVAL; |
| 2061 |
} |
| 2062 |
|
| 2063 |
mld->scan.cmd = kmalloc(scan_cmd_size, GFP_KERNEL); |
| 2064 |
if (!mld->scan.cmd) |
| 2065 |
return -ENOMEM; |
| 2066 |
|
| 2067 |
mld->scan.cmd_size = scan_cmd_size; |
| 2068 |
|
| 2069 |
return 0; |
| 2070 |
} |
| 2071 |
|
| 2072 |
static int iwl_mld_chanidx_from_phy(struct iwl_mld *mld, |
| 2073 |
enum nl80211_band band, |
| 2074 |
u16 phy_chan_num) |
| 2075 |
{ |
| 2076 |
struct ieee80211_supported_band *sband = mld->wiphy->bands[band]; |
| 2077 |
|
| 2078 |
if (WARN_ON_ONCE(!sband)) |
| 2079 |
return -EINVAL; |
| 2080 |
|
| 2081 |
for (int chan_idx = 0; chan_idx < sband->n_channels; chan_idx++) { |
| 2082 |
struct ieee80211_channel *channel = &sband->channels[chan_idx]; |
| 2083 |
|
| 2084 |
if (channel->hw_value == phy_chan_num) |
| 2085 |
return chan_idx; |
| 2086 |
} |
| 2087 |
|
| 2088 |
return -EINVAL; |
| 2089 |
} |
| 2090 |
|
| 2091 |
void iwl_mld_handle_channel_survey_notif(struct iwl_mld *mld, |
| 2092 |
struct iwl_rx_packet *pkt) |
| 2093 |
{ |
| 2094 |
const struct iwl_umac_scan_channel_survey_notif *notif = |
| 2095 |
(void *)pkt->data; |
| 2096 |
struct iwl_mld_survey_channel *info; |
| 2097 |
enum nl80211_band band; |
| 2098 |
int chan_idx; |
| 2099 |
|
| 2100 |
if (!mld->channel_survey) { |
| 2101 |
size_t n_channels = 0; |
| 2102 |
|
| 2103 |
for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| 2104 |
if (!mld->wiphy->bands[band]) |
| 2105 |
continue; |
| 2106 |
|
| 2107 |
n_channels += mld->wiphy->bands[band]->n_channels; |
| 2108 |
} |
| 2109 |
|
| 2110 |
mld->channel_survey = kzalloc_flex(*mld->channel_survey, |
| 2111 |
channels, n_channels); |
| 2112 |
|
| 2113 |
if (!mld->channel_survey) |
| 2114 |
return; |
| 2115 |
|
| 2116 |
mld->channel_survey->n_channels = n_channels; |
| 2117 |
n_channels = 0; |
| 2118 |
for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| 2119 |
if (!mld->wiphy->bands[band]) |
| 2120 |
continue; |
| 2121 |
|
| 2122 |
mld->channel_survey->bands[band] = |
| 2123 |
&mld->channel_survey->channels[n_channels]; |
| 2124 |
n_channels += mld->wiphy->bands[band]->n_channels; |
| 2125 |
} |
| 2126 |
} |
| 2127 |
|
| 2128 |
band = iwl_mld_phy_band_to_nl80211(le32_to_cpu(notif->band)); |
| 2129 |
chan_idx = iwl_mld_chanidx_from_phy(mld, band, |
| 2130 |
le32_to_cpu(notif->channel)); |
| 2131 |
if (WARN_ON_ONCE(chan_idx < 0)) |
| 2132 |
return; |
| 2133 |
|
| 2134 |
IWL_DEBUG_SCAN(mld, "channel survey received for freq %d\n", |
| 2135 |
mld->wiphy->bands[band]->channels[chan_idx].center_freq); |
| 2136 |
|
| 2137 |
info = &mld->channel_survey->bands[band][chan_idx]; |
| 2138 |
|
| 2139 |
/* Times are all in ms */ |
| 2140 |
info->time = le32_to_cpu(notif->active_time); |
| 2141 |
info->time_busy = le32_to_cpu(notif->busy_time); |
| 2142 |
info->noise = |
| 2143 |
iwl_average_neg_dbm(notif->noise, ARRAY_SIZE(notif->noise)); |
| 2144 |
} |
| 2145 |
|
| 2146 |
int iwl_mld_mac80211_get_survey(struct ieee80211_hw *hw, int idx, |
| 2147 |
struct survey_info *survey) |
| 2148 |
{ |
| 2149 |
struct iwl_mld *mld = IWL_MAC80211_GET_MLD(hw); |
| 2150 |
int curr_idx = 0; |
| 2151 |
|
| 2152 |
if (!mld->channel_survey) |
| 2153 |
return -ENOENT; |
| 2154 |
|
| 2155 |
/* Iterate bands/channels to find the requested index. |
| 2156 |
* Logically this returns the entry with index "idx" from a flattened |
| 2157 |
* survey result array that only contains channels with information. |
| 2158 |
* The current index into this flattened array is tracked in curr_idx. |
| 2159 |
*/ |
| 2160 |
for (enum nl80211_band band = 0; band < NUM_NL80211_BANDS; band++) { |
| 2161 |
struct ieee80211_supported_band *sband = |
| 2162 |
mld->wiphy->bands[band]; |
| 2163 |
|
| 2164 |
if (!sband) |
| 2165 |
continue; |
| 2166 |
|
| 2167 |
for (int per_band_idx = 0; |
| 2168 |
per_band_idx < sband->n_channels; |
| 2169 |
per_band_idx++) { |
| 2170 |
struct iwl_mld_survey_channel *info = |
| 2171 |
&mld->channel_survey->bands[band][per_band_idx]; |
| 2172 |
|
| 2173 |
/* Skip entry entirely, it was not reported/scanned, |
| 2174 |
* do not increase curr_idx for this entry. |
| 2175 |
*/ |
| 2176 |
if (!info->time) |
| 2177 |
continue; |
| 2178 |
|
| 2179 |
/* Search did not reach the requested entry yet, |
| 2180 |
* increment curr_idx and continue. |
| 2181 |
*/ |
| 2182 |
if (idx != curr_idx) { |
| 2183 |
curr_idx++; |
| 2184 |
continue; |
| 2185 |
} |
| 2186 |
|
| 2187 |
/* Found (the next) channel to report */ |
| 2188 |
survey->channel = &sband->channels[per_band_idx]; |
| 2189 |
survey->filled = SURVEY_INFO_TIME | |
| 2190 |
SURVEY_INFO_TIME_BUSY; |
| 2191 |
survey->time = info->time; |
| 2192 |
survey->time_busy = info->time_busy; |
| 2193 |
survey->noise = info->noise; |
| 2194 |
if (survey->noise < 0) |
| 2195 |
survey->filled |= SURVEY_INFO_NOISE_DBM; |
| 2196 |
|
| 2197 |
return 0; |
| 2198 |
} |
| 2199 |
} |
| 2200 |
|
| 2201 |
return -ENOENT; |
| 2202 |
} |