| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/****************************************************************************** |
| 3 |
|
| 4 |
Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved. |
| 5 |
|
| 6 |
|
| 7 |
Contact Information: |
| 8 |
Intel Linux Wireless <[email protected]> |
| 9 |
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| 10 |
|
| 11 |
Portions of this file are based on the sample_* files provided by Wireless |
| 12 |
Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes |
| 13 |
<[email protected]> |
| 14 |
|
| 15 |
Portions of this file are based on the Host AP project, |
| 16 |
Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen |
| 17 |
<[email protected]> |
| 18 |
Copyright (c) 2002-2003, Jouni Malinen <[email protected]> |
| 19 |
|
| 20 |
Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and |
| 21 |
ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c |
| 22 |
available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox |
| 23 |
|
| 24 |
******************************************************************************/ |
| 25 |
/* |
| 26 |
|
| 27 |
Initial driver on which this is based was developed by Janusz Gorycki, |
| 28 |
Maciej Urbaniak, and Maciej Sosnowski. |
| 29 |
|
| 30 |
Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak. |
| 31 |
|
| 32 |
Theory of Operation |
| 33 |
|
| 34 |
Tx - Commands and Data |
| 35 |
|
| 36 |
Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs) |
| 37 |
Each TBD contains a pointer to the physical (dma_addr_t) address of data being |
| 38 |
sent to the firmware as well as the length of the data. |
| 39 |
|
| 40 |
The host writes to the TBD queue at the WRITE index. The WRITE index points |
| 41 |
to the _next_ packet to be written and is advanced when after the TBD has been |
| 42 |
filled. |
| 43 |
|
| 44 |
The firmware pulls from the TBD queue at the READ index. The READ index points |
| 45 |
to the currently being read entry, and is advanced once the firmware is |
| 46 |
done with a packet. |
| 47 |
|
| 48 |
When data is sent to the firmware, the first TBD is used to indicate to the |
| 49 |
firmware if a Command or Data is being sent. If it is Command, all of the |
| 50 |
command information is contained within the physical address referred to by the |
| 51 |
TBD. If it is Data, the first TBD indicates the type of data packet, number |
| 52 |
of fragments, etc. The next TBD then refers to the actual packet location. |
| 53 |
|
| 54 |
The Tx flow cycle is as follows: |
| 55 |
|
| 56 |
1) ipw2100_tx() is called by kernel with SKB to transmit |
| 57 |
2) Packet is move from the tx_free_list and appended to the transmit pending |
| 58 |
list (tx_pend_list) |
| 59 |
3) work is scheduled to move pending packets into the shared circular queue. |
| 60 |
4) when placing packet in the circular queue, the incoming SKB is DMA mapped |
| 61 |
to a physical address. That address is entered into a TBD. Two TBDs are |
| 62 |
filled out. The first indicating a data packet, the second referring to the |
| 63 |
actual payload data. |
| 64 |
5) the packet is removed from tx_pend_list and placed on the end of the |
| 65 |
firmware pending list (fw_pend_list) |
| 66 |
6) firmware is notified that the WRITE index has |
| 67 |
7) Once the firmware has processed the TBD, INTA is triggered. |
| 68 |
8) For each Tx interrupt received from the firmware, the READ index is checked |
| 69 |
to see which TBDs are done being processed. |
| 70 |
9) For each TBD that has been processed, the ISR pulls the oldest packet |
| 71 |
from the fw_pend_list. |
| 72 |
10)The packet structure contained in the fw_pend_list is then used |
| 73 |
to unmap the DMA address and to free the SKB originally passed to the driver |
| 74 |
from the kernel. |
| 75 |
11)The packet structure is placed onto the tx_free_list |
| 76 |
|
| 77 |
The above steps are the same for commands, only the msg_free_list/msg_pend_list |
| 78 |
are used instead of tx_free_list/tx_pend_list |
| 79 |
|
| 80 |
... |
| 81 |
|
| 82 |
Critical Sections / Locking : |
| 83 |
|
| 84 |
There are two locks utilized. The first is the low level lock (priv->low_lock) |
| 85 |
that protects the following: |
| 86 |
|
| 87 |
- Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows: |
| 88 |
|
| 89 |
tx_free_list : Holds pre-allocated Tx buffers. |
| 90 |
TAIL modified in __ipw2100_tx_process() |
| 91 |
HEAD modified in ipw2100_tx() |
| 92 |
|
| 93 |
tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring |
| 94 |
TAIL modified ipw2100_tx() |
| 95 |
HEAD modified by ipw2100_tx_send_data() |
| 96 |
|
| 97 |
msg_free_list : Holds pre-allocated Msg (Command) buffers |
| 98 |
TAIL modified in __ipw2100_tx_process() |
| 99 |
HEAD modified in ipw2100_hw_send_command() |
| 100 |
|
| 101 |
msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring |
| 102 |
TAIL modified in ipw2100_hw_send_command() |
| 103 |
HEAD modified in ipw2100_tx_send_commands() |
| 104 |
|
| 105 |
The flow of data on the TX side is as follows: |
| 106 |
|
| 107 |
MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST |
| 108 |
TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST |
| 109 |
|
| 110 |
The methods that work on the TBD ring are protected via priv->low_lock. |
| 111 |
|
| 112 |
- The internal data state of the device itself |
| 113 |
- Access to the firmware read/write indexes for the BD queues |
| 114 |
and associated logic |
| 115 |
|
| 116 |
All external entry functions are locked with the priv->action_lock to ensure |
| 117 |
that only one external action is invoked at a time. |
| 118 |
|
| 119 |
|
| 120 |
*/ |
| 121 |
|
| 122 |
#include <linux/compiler.h> |
| 123 |
#include <linux/errno.h> |
| 124 |
#include <linux/if_arp.h> |
| 125 |
#include <linux/in6.h> |
| 126 |
#include <linux/in.h> |
| 127 |
#include <linux/ip.h> |
| 128 |
#include <linux/kernel.h> |
| 129 |
#include <linux/kmod.h> |
| 130 |
#include <linux/module.h> |
| 131 |
#include <linux/netdevice.h> |
| 132 |
#include <linux/ethtool.h> |
| 133 |
#include <linux/pci.h> |
| 134 |
#include <linux/dma-mapping.h> |
| 135 |
#include <linux/proc_fs.h> |
| 136 |
#include <linux/skbuff.h> |
| 137 |
#include <linux/uaccess.h> |
| 138 |
#include <asm/io.h> |
| 139 |
#include <linux/fs.h> |
| 140 |
#include <linux/mm.h> |
| 141 |
#include <linux/slab.h> |
| 142 |
#include <linux/unistd.h> |
| 143 |
#include <linux/stringify.h> |
| 144 |
#include <linux/tcp.h> |
| 145 |
#include <linux/types.h> |
| 146 |
#include <linux/time.h> |
| 147 |
#include <linux/firmware.h> |
| 148 |
#include <linux/acpi.h> |
| 149 |
#include <linux/ctype.h> |
| 150 |
#include <linux/pm_qos.h> |
| 151 |
#include "ipw2100.h" |
| 152 |
#include "ipw.h" |
| 153 |
|
| 154 |
#define IPW2100_VERSION "git-1.2.2" |
| 155 |
|
| 156 |
#define DRV_NAME "ipw2100" |
| 157 |
#define DRV_VERSION IPW2100_VERSION |
| 158 |
#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver" |
| 159 |
#define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation" |
| 160 |
|
| 161 |
static struct pm_qos_request ipw2100_pm_qos_req; |
| 162 |
|
| 163 |
/* Debugging stuff */ |
| 164 |
#ifdef CONFIG_IPW2100_DEBUG |
| 165 |
#define IPW2100_RX_DEBUG /* Reception debugging */ |
| 166 |
#endif |
| 167 |
|
| 168 |
MODULE_DESCRIPTION(DRV_DESCRIPTION); |
| 169 |
MODULE_VERSION(DRV_VERSION); |
| 170 |
MODULE_AUTHOR(DRV_COPYRIGHT); |
| 171 |
MODULE_LICENSE("GPL"); |
| 172 |
|
| 173 |
static int debug = 0; |
| 174 |
static int network_mode = 0; |
| 175 |
static int channel = 0; |
| 176 |
static int associate = 0; |
| 177 |
static int disable = 0; |
| 178 |
#ifdef CONFIG_PM |
| 179 |
static struct ipw2100_fw ipw2100_firmware; |
| 180 |
#endif |
| 181 |
|
| 182 |
#include <linux/moduleparam.h> |
| 183 |
module_param(debug, int, 0444); |
| 184 |
module_param_named(mode, network_mode, int, 0444); |
| 185 |
module_param(channel, int, 0444); |
| 186 |
module_param(associate, int, 0444); |
| 187 |
module_param(disable, int, 0444); |
| 188 |
|
| 189 |
MODULE_PARM_DESC(debug, "debug level"); |
| 190 |
MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)"); |
| 191 |
MODULE_PARM_DESC(channel, "channel"); |
| 192 |
MODULE_PARM_DESC(associate, "auto associate when scanning (default off)"); |
| 193 |
MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); |
| 194 |
|
| 195 |
static u32 ipw2100_debug_level = IPW_DL_NONE; |
| 196 |
|
| 197 |
#ifdef CONFIG_IPW2100_DEBUG |
| 198 |
#define IPW_DEBUG(level, message...) \ |
| 199 |
do { \ |
| 200 |
if (ipw2100_debug_level & (level)) { \ |
| 201 |
printk(KERN_DEBUG "ipw2100: %s ", __func__); \ |
| 202 |
printk(message); \ |
| 203 |
} \ |
| 204 |
} while (0) |
| 205 |
#else |
| 206 |
#define IPW_DEBUG(level, message...) do {} while (0) |
| 207 |
#endif /* CONFIG_IPW2100_DEBUG */ |
| 208 |
|
| 209 |
#ifdef CONFIG_IPW2100_DEBUG |
| 210 |
static const char *command_types[] = { |
| 211 |
"undefined", |
| 212 |
"unused", /* HOST_ATTENTION */ |
| 213 |
"HOST_COMPLETE", |
| 214 |
"unused", /* SLEEP */ |
| 215 |
"unused", /* HOST_POWER_DOWN */ |
| 216 |
"unused", |
| 217 |
"SYSTEM_CONFIG", |
| 218 |
"unused", /* SET_IMR */ |
| 219 |
"SSID", |
| 220 |
"MANDATORY_BSSID", |
| 221 |
"AUTHENTICATION_TYPE", |
| 222 |
"ADAPTER_ADDRESS", |
| 223 |
"PORT_TYPE", |
| 224 |
"INTERNATIONAL_MODE", |
| 225 |
"CHANNEL", |
| 226 |
"RTS_THRESHOLD", |
| 227 |
"FRAG_THRESHOLD", |
| 228 |
"POWER_MODE", |
| 229 |
"TX_RATES", |
| 230 |
"BASIC_TX_RATES", |
| 231 |
"WEP_KEY_INFO", |
| 232 |
"unused", |
| 233 |
"unused", |
| 234 |
"unused", |
| 235 |
"unused", |
| 236 |
"WEP_KEY_INDEX", |
| 237 |
"WEP_FLAGS", |
| 238 |
"ADD_MULTICAST", |
| 239 |
"CLEAR_ALL_MULTICAST", |
| 240 |
"BEACON_INTERVAL", |
| 241 |
"ATIM_WINDOW", |
| 242 |
"CLEAR_STATISTICS", |
| 243 |
"undefined", |
| 244 |
"undefined", |
| 245 |
"undefined", |
| 246 |
"undefined", |
| 247 |
"TX_POWER_INDEX", |
| 248 |
"undefined", |
| 249 |
"undefined", |
| 250 |
"undefined", |
| 251 |
"undefined", |
| 252 |
"undefined", |
| 253 |
"undefined", |
| 254 |
"BROADCAST_SCAN", |
| 255 |
"CARD_DISABLE", |
| 256 |
"PREFERRED_BSSID", |
| 257 |
"SET_SCAN_OPTIONS", |
| 258 |
"SCAN_DWELL_TIME", |
| 259 |
"SWEEP_TABLE", |
| 260 |
"AP_OR_STATION_TABLE", |
| 261 |
"GROUP_ORDINALS", |
| 262 |
"SHORT_RETRY_LIMIT", |
| 263 |
"LONG_RETRY_LIMIT", |
| 264 |
"unused", /* SAVE_CALIBRATION */ |
| 265 |
"unused", /* RESTORE_CALIBRATION */ |
| 266 |
"undefined", |
| 267 |
"undefined", |
| 268 |
"undefined", |
| 269 |
"HOST_PRE_POWER_DOWN", |
| 270 |
"unused", /* HOST_INTERRUPT_COALESCING */ |
| 271 |
"undefined", |
| 272 |
"CARD_DISABLE_PHY_OFF", |
| 273 |
"MSDU_TX_RATES", |
| 274 |
"undefined", |
| 275 |
"SET_STATION_STAT_BITS", |
| 276 |
"CLEAR_STATIONS_STAT_BITS", |
| 277 |
"LEAP_ROGUE_MODE", |
| 278 |
"SET_SECURITY_INFORMATION", |
| 279 |
"DISASSOCIATION_BSSID", |
| 280 |
"SET_WPA_ASS_IE" |
| 281 |
}; |
| 282 |
#endif |
| 283 |
|
| 284 |
static const long ipw2100_frequencies[] = { |
| 285 |
2412, 2417, 2422, 2427, |
| 286 |
2432, 2437, 2442, 2447, |
| 287 |
2452, 2457, 2462, 2467, |
| 288 |
2472, 2484 |
| 289 |
}; |
| 290 |
|
| 291 |
#define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies) |
| 292 |
|
| 293 |
static struct ieee80211_rate ipw2100_bg_rates[] = { |
| 294 |
{ .bitrate = 10 }, |
| 295 |
{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 296 |
{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 297 |
{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| 298 |
}; |
| 299 |
|
| 300 |
#define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates) |
| 301 |
|
| 302 |
/* Pre-decl until we get the code solid and then we can clean it up */ |
| 303 |
static void ipw2100_tx_send_commands(struct ipw2100_priv *priv); |
| 304 |
static void ipw2100_tx_send_data(struct ipw2100_priv *priv); |
| 305 |
static int ipw2100_adapter_setup(struct ipw2100_priv *priv); |
| 306 |
|
| 307 |
static void ipw2100_queues_initialize(struct ipw2100_priv *priv); |
| 308 |
static void ipw2100_queues_free(struct ipw2100_priv *priv); |
| 309 |
static int ipw2100_queues_allocate(struct ipw2100_priv *priv); |
| 310 |
|
| 311 |
static int ipw2100_fw_download(struct ipw2100_priv *priv, |
| 312 |
struct ipw2100_fw *fw); |
| 313 |
static int ipw2100_get_firmware(struct ipw2100_priv *priv, |
| 314 |
struct ipw2100_fw *fw); |
| 315 |
static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, |
| 316 |
size_t max); |
| 317 |
static void ipw2100_release_firmware(struct ipw2100_priv *priv, |
| 318 |
struct ipw2100_fw *fw); |
| 319 |
static int ipw2100_ucode_download(struct ipw2100_priv *priv, |
| 320 |
struct ipw2100_fw *fw); |
| 321 |
static void ipw2100_wx_event_work(struct work_struct *work); |
| 322 |
static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev); |
| 323 |
static const struct iw_handler_def ipw2100_wx_handler_def; |
| 324 |
|
| 325 |
static inline void read_register(struct net_device *dev, u32 reg, u32 * val) |
| 326 |
{ |
| 327 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 328 |
|
| 329 |
*val = ioread32(priv->ioaddr + reg); |
| 330 |
IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val); |
| 331 |
} |
| 332 |
|
| 333 |
static inline void write_register(struct net_device *dev, u32 reg, u32 val) |
| 334 |
{ |
| 335 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 336 |
|
| 337 |
iowrite32(val, priv->ioaddr + reg); |
| 338 |
IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val); |
| 339 |
} |
| 340 |
|
| 341 |
static inline void read_register_word(struct net_device *dev, u32 reg, |
| 342 |
u16 * val) |
| 343 |
{ |
| 344 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 345 |
|
| 346 |
*val = ioread16(priv->ioaddr + reg); |
| 347 |
IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val); |
| 348 |
} |
| 349 |
|
| 350 |
static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val) |
| 351 |
{ |
| 352 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 353 |
|
| 354 |
*val = ioread8(priv->ioaddr + reg); |
| 355 |
IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val); |
| 356 |
} |
| 357 |
|
| 358 |
static inline void write_register_word(struct net_device *dev, u32 reg, u16 val) |
| 359 |
{ |
| 360 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 361 |
|
| 362 |
iowrite16(val, priv->ioaddr + reg); |
| 363 |
IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val); |
| 364 |
} |
| 365 |
|
| 366 |
static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val) |
| 367 |
{ |
| 368 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 369 |
|
| 370 |
iowrite8(val, priv->ioaddr + reg); |
| 371 |
IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val); |
| 372 |
} |
| 373 |
|
| 374 |
static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val) |
| 375 |
{ |
| 376 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 377 |
addr & IPW_REG_INDIRECT_ADDR_MASK); |
| 378 |
read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| 379 |
} |
| 380 |
|
| 381 |
static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val) |
| 382 |
{ |
| 383 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 384 |
addr & IPW_REG_INDIRECT_ADDR_MASK); |
| 385 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| 386 |
} |
| 387 |
|
| 388 |
static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val) |
| 389 |
{ |
| 390 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 391 |
addr & IPW_REG_INDIRECT_ADDR_MASK); |
| 392 |
read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| 393 |
} |
| 394 |
|
| 395 |
static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val) |
| 396 |
{ |
| 397 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 398 |
addr & IPW_REG_INDIRECT_ADDR_MASK); |
| 399 |
write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| 400 |
} |
| 401 |
|
| 402 |
static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val) |
| 403 |
{ |
| 404 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 405 |
addr & IPW_REG_INDIRECT_ADDR_MASK); |
| 406 |
read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| 407 |
} |
| 408 |
|
| 409 |
static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val) |
| 410 |
{ |
| 411 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 412 |
addr & IPW_REG_INDIRECT_ADDR_MASK); |
| 413 |
write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
| 414 |
} |
| 415 |
|
| 416 |
static void write_nic_memory(struct net_device *dev, u32 addr, u32 len, |
| 417 |
const u8 * buf) |
| 418 |
{ |
| 419 |
u32 aligned_addr; |
| 420 |
u32 aligned_len; |
| 421 |
u32 dif_len; |
| 422 |
u32 i; |
| 423 |
|
| 424 |
/* read first nibble byte by byte */ |
| 425 |
aligned_addr = addr & (~0x3); |
| 426 |
dif_len = addr - aligned_addr; |
| 427 |
if (dif_len) { |
| 428 |
/* Start reading at aligned_addr + dif_len */ |
| 429 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 430 |
aligned_addr); |
| 431 |
for (i = dif_len; i < 4; i++, buf++) |
| 432 |
write_register_byte(dev, |
| 433 |
IPW_REG_INDIRECT_ACCESS_DATA + i, |
| 434 |
*buf); |
| 435 |
|
| 436 |
len -= dif_len; |
| 437 |
aligned_addr += 4; |
| 438 |
} |
| 439 |
|
| 440 |
/* read DWs through autoincrement registers */ |
| 441 |
write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr); |
| 442 |
aligned_len = len & (~0x3); |
| 443 |
for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) |
| 444 |
write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf); |
| 445 |
|
| 446 |
/* copy the last nibble */ |
| 447 |
dif_len = len - aligned_len; |
| 448 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr); |
| 449 |
for (i = 0; i < dif_len; i++, buf++) |
| 450 |
write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, |
| 451 |
*buf); |
| 452 |
} |
| 453 |
|
| 454 |
static void read_nic_memory(struct net_device *dev, u32 addr, u32 len, |
| 455 |
u8 * buf) |
| 456 |
{ |
| 457 |
u32 aligned_addr; |
| 458 |
u32 aligned_len; |
| 459 |
u32 dif_len; |
| 460 |
u32 i; |
| 461 |
|
| 462 |
/* read first nibble byte by byte */ |
| 463 |
aligned_addr = addr & (~0x3); |
| 464 |
dif_len = addr - aligned_addr; |
| 465 |
if (dif_len) { |
| 466 |
/* Start reading at aligned_addr + dif_len */ |
| 467 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
| 468 |
aligned_addr); |
| 469 |
for (i = dif_len; i < 4; i++, buf++) |
| 470 |
read_register_byte(dev, |
| 471 |
IPW_REG_INDIRECT_ACCESS_DATA + i, |
| 472 |
buf); |
| 473 |
|
| 474 |
len -= dif_len; |
| 475 |
aligned_addr += 4; |
| 476 |
} |
| 477 |
|
| 478 |
/* read DWs through autoincrement registers */ |
| 479 |
write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr); |
| 480 |
aligned_len = len & (~0x3); |
| 481 |
for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) |
| 482 |
read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf); |
| 483 |
|
| 484 |
/* copy the last nibble */ |
| 485 |
dif_len = len - aligned_len; |
| 486 |
write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr); |
| 487 |
for (i = 0; i < dif_len; i++, buf++) |
| 488 |
read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf); |
| 489 |
} |
| 490 |
|
| 491 |
static bool ipw2100_hw_is_adapter_in_system(struct net_device *dev) |
| 492 |
{ |
| 493 |
u32 dbg; |
| 494 |
|
| 495 |
read_register(dev, IPW_REG_DOA_DEBUG_AREA_START, &dbg); |
| 496 |
|
| 497 |
return dbg == IPW_DATA_DOA_DEBUG_VALUE; |
| 498 |
} |
| 499 |
|
| 500 |
static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, |
| 501 |
void *val, u32 * len) |
| 502 |
{ |
| 503 |
struct ipw2100_ordinals *ordinals = &priv->ordinals; |
| 504 |
u32 addr; |
| 505 |
u32 field_info; |
| 506 |
u16 field_len; |
| 507 |
u16 field_count; |
| 508 |
u32 total_length; |
| 509 |
|
| 510 |
if (ordinals->table1_addr == 0) { |
| 511 |
printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals " |
| 512 |
"before they have been loaded.\n"); |
| 513 |
return -EINVAL; |
| 514 |
} |
| 515 |
|
| 516 |
if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { |
| 517 |
if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) { |
| 518 |
*len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| 519 |
|
| 520 |
printk(KERN_WARNING DRV_NAME |
| 521 |
": ordinal buffer length too small, need %zd\n", |
| 522 |
IPW_ORD_TAB_1_ENTRY_SIZE); |
| 523 |
|
| 524 |
return -EINVAL; |
| 525 |
} |
| 526 |
|
| 527 |
read_nic_dword(priv->net_dev, |
| 528 |
ordinals->table1_addr + (ord << 2), &addr); |
| 529 |
read_nic_dword(priv->net_dev, addr, val); |
| 530 |
|
| 531 |
*len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| 532 |
|
| 533 |
return 0; |
| 534 |
} |
| 535 |
|
| 536 |
if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) { |
| 537 |
|
| 538 |
ord -= IPW_START_ORD_TAB_2; |
| 539 |
|
| 540 |
/* get the address of statistic */ |
| 541 |
read_nic_dword(priv->net_dev, |
| 542 |
ordinals->table2_addr + (ord << 3), &addr); |
| 543 |
|
| 544 |
/* get the second DW of statistics ; |
| 545 |
* two 16-bit words - first is length, second is count */ |
| 546 |
read_nic_dword(priv->net_dev, |
| 547 |
ordinals->table2_addr + (ord << 3) + sizeof(u32), |
| 548 |
&field_info); |
| 549 |
|
| 550 |
/* get each entry length */ |
| 551 |
field_len = *((u16 *) & field_info); |
| 552 |
|
| 553 |
/* get number of entries */ |
| 554 |
field_count = *(((u16 *) & field_info) + 1); |
| 555 |
|
| 556 |
/* abort if no enough memory */ |
| 557 |
total_length = field_len * field_count; |
| 558 |
if (total_length > *len) { |
| 559 |
*len = total_length; |
| 560 |
return -EINVAL; |
| 561 |
} |
| 562 |
|
| 563 |
*len = total_length; |
| 564 |
if (!total_length) |
| 565 |
return 0; |
| 566 |
|
| 567 |
/* read the ordinal data from the SRAM */ |
| 568 |
read_nic_memory(priv->net_dev, addr, total_length, val); |
| 569 |
|
| 570 |
return 0; |
| 571 |
} |
| 572 |
|
| 573 |
printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor " |
| 574 |
"in table 2\n", ord); |
| 575 |
|
| 576 |
return -EINVAL; |
| 577 |
} |
| 578 |
|
| 579 |
static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val, |
| 580 |
u32 * len) |
| 581 |
{ |
| 582 |
struct ipw2100_ordinals *ordinals = &priv->ordinals; |
| 583 |
u32 addr; |
| 584 |
|
| 585 |
if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { |
| 586 |
if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) { |
| 587 |
*len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| 588 |
IPW_DEBUG_INFO("wrong size\n"); |
| 589 |
return -EINVAL; |
| 590 |
} |
| 591 |
|
| 592 |
read_nic_dword(priv->net_dev, |
| 593 |
ordinals->table1_addr + (ord << 2), &addr); |
| 594 |
|
| 595 |
write_nic_dword(priv->net_dev, addr, *val); |
| 596 |
|
| 597 |
*len = IPW_ORD_TAB_1_ENTRY_SIZE; |
| 598 |
|
| 599 |
return 0; |
| 600 |
} |
| 601 |
|
| 602 |
IPW_DEBUG_INFO("wrong table\n"); |
| 603 |
if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) |
| 604 |
return -EINVAL; |
| 605 |
|
| 606 |
return -EINVAL; |
| 607 |
} |
| 608 |
|
| 609 |
static char *snprint_line(char *buf, size_t count, |
| 610 |
const u8 * data, u32 len, u32 ofs) |
| 611 |
{ |
| 612 |
int out, i, j, l; |
| 613 |
char c; |
| 614 |
|
| 615 |
out = scnprintf(buf, count, "%08X", ofs); |
| 616 |
|
| 617 |
for (l = 0, i = 0; i < 2; i++) { |
| 618 |
out += scnprintf(buf + out, count - out, " "); |
| 619 |
for (j = 0; j < 8 && l < len; j++, l++) |
| 620 |
out += scnprintf(buf + out, count - out, "%02X ", |
| 621 |
data[(i * 8 + j)]); |
| 622 |
for (; j < 8; j++) |
| 623 |
out += scnprintf(buf + out, count - out, " "); |
| 624 |
} |
| 625 |
|
| 626 |
out += scnprintf(buf + out, count - out, " "); |
| 627 |
for (l = 0, i = 0; i < 2; i++) { |
| 628 |
out += scnprintf(buf + out, count - out, " "); |
| 629 |
for (j = 0; j < 8 && l < len; j++, l++) { |
| 630 |
c = data[(i * 8 + j)]; |
| 631 |
if (!isascii(c) || !isprint(c)) |
| 632 |
c = '.'; |
| 633 |
|
| 634 |
out += scnprintf(buf + out, count - out, "%c", c); |
| 635 |
} |
| 636 |
|
| 637 |
for (; j < 8; j++) |
| 638 |
out += scnprintf(buf + out, count - out, " "); |
| 639 |
} |
| 640 |
|
| 641 |
return buf; |
| 642 |
} |
| 643 |
|
| 644 |
static void printk_buf(int level, const u8 * data, u32 len) |
| 645 |
{ |
| 646 |
char line[81]; |
| 647 |
u32 ofs = 0; |
| 648 |
if (!(ipw2100_debug_level & level)) |
| 649 |
return; |
| 650 |
|
| 651 |
while (len) { |
| 652 |
printk(KERN_DEBUG "%s\n", |
| 653 |
snprint_line(line, sizeof(line), &data[ofs], |
| 654 |
min(len, 16U), ofs)); |
| 655 |
ofs += 16; |
| 656 |
len -= min(len, 16U); |
| 657 |
} |
| 658 |
} |
| 659 |
|
| 660 |
#define MAX_RESET_BACKOFF 10 |
| 661 |
|
| 662 |
static void schedule_reset(struct ipw2100_priv *priv) |
| 663 |
{ |
| 664 |
time64_t now = ktime_get_boottime_seconds(); |
| 665 |
|
| 666 |
/* If we haven't received a reset request within the backoff period, |
| 667 |
* then we can reset the backoff interval so this reset occurs |
| 668 |
* immediately */ |
| 669 |
if (priv->reset_backoff && |
| 670 |
(now - priv->last_reset > priv->reset_backoff)) |
| 671 |
priv->reset_backoff = 0; |
| 672 |
|
| 673 |
priv->last_reset = now; |
| 674 |
|
| 675 |
if (!(priv->status & STATUS_RESET_PENDING)) { |
| 676 |
IPW_DEBUG_INFO("%s: Scheduling firmware restart (%llds).\n", |
| 677 |
priv->net_dev->name, priv->reset_backoff); |
| 678 |
netif_carrier_off(priv->net_dev); |
| 679 |
netif_stop_queue(priv->net_dev); |
| 680 |
priv->status |= STATUS_RESET_PENDING; |
| 681 |
if (priv->reset_backoff) |
| 682 |
schedule_delayed_work(&priv->reset_work, |
| 683 |
priv->reset_backoff * HZ); |
| 684 |
else |
| 685 |
schedule_delayed_work(&priv->reset_work, 0); |
| 686 |
|
| 687 |
if (priv->reset_backoff < MAX_RESET_BACKOFF) |
| 688 |
priv->reset_backoff++; |
| 689 |
|
| 690 |
wake_up_interruptible(&priv->wait_command_queue); |
| 691 |
} else |
| 692 |
IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n", |
| 693 |
priv->net_dev->name); |
| 694 |
|
| 695 |
} |
| 696 |
|
| 697 |
#define HOST_COMPLETE_TIMEOUT (2 * HZ) |
| 698 |
static int ipw2100_hw_send_command(struct ipw2100_priv *priv, |
| 699 |
struct host_command *cmd) |
| 700 |
{ |
| 701 |
struct list_head *element; |
| 702 |
struct ipw2100_tx_packet *packet; |
| 703 |
unsigned long flags; |
| 704 |
int err = 0; |
| 705 |
|
| 706 |
IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n", |
| 707 |
command_types[cmd->host_command], cmd->host_command, |
| 708 |
cmd->host_command_length); |
| 709 |
printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters, |
| 710 |
cmd->host_command_length); |
| 711 |
|
| 712 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 713 |
|
| 714 |
if (priv->fatal_error) { |
| 715 |
IPW_DEBUG_INFO |
| 716 |
("Attempt to send command while hardware in fatal error condition.\n"); |
| 717 |
err = -EIO; |
| 718 |
goto fail_unlock; |
| 719 |
} |
| 720 |
|
| 721 |
if (!(priv->status & STATUS_RUNNING)) { |
| 722 |
IPW_DEBUG_INFO |
| 723 |
("Attempt to send command while hardware is not running.\n"); |
| 724 |
err = -EIO; |
| 725 |
goto fail_unlock; |
| 726 |
} |
| 727 |
|
| 728 |
if (priv->status & STATUS_CMD_ACTIVE) { |
| 729 |
IPW_DEBUG_INFO |
| 730 |
("Attempt to send command while another command is pending.\n"); |
| 731 |
err = -EBUSY; |
| 732 |
goto fail_unlock; |
| 733 |
} |
| 734 |
|
| 735 |
if (list_empty(&priv->msg_free_list)) { |
| 736 |
IPW_DEBUG_INFO("no available msg buffers\n"); |
| 737 |
goto fail_unlock; |
| 738 |
} |
| 739 |
|
| 740 |
priv->status |= STATUS_CMD_ACTIVE; |
| 741 |
priv->messages_sent++; |
| 742 |
|
| 743 |
element = priv->msg_free_list.next; |
| 744 |
|
| 745 |
packet = list_entry(element, struct ipw2100_tx_packet, list); |
| 746 |
packet->jiffy_start = jiffies; |
| 747 |
|
| 748 |
/* initialize the firmware command packet */ |
| 749 |
packet->info.c_struct.cmd->host_command_reg = cmd->host_command; |
| 750 |
packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1; |
| 751 |
packet->info.c_struct.cmd->host_command_len_reg = |
| 752 |
cmd->host_command_length; |
| 753 |
packet->info.c_struct.cmd->sequence = cmd->host_command_sequence; |
| 754 |
|
| 755 |
memcpy(packet->info.c_struct.cmd->host_command_params_reg, |
| 756 |
cmd->host_command_parameters, |
| 757 |
sizeof(packet->info.c_struct.cmd->host_command_params_reg)); |
| 758 |
|
| 759 |
list_del(element); |
| 760 |
DEC_STAT(&priv->msg_free_stat); |
| 761 |
|
| 762 |
list_add_tail(element, &priv->msg_pend_list); |
| 763 |
INC_STAT(&priv->msg_pend_stat); |
| 764 |
|
| 765 |
ipw2100_tx_send_commands(priv); |
| 766 |
ipw2100_tx_send_data(priv); |
| 767 |
|
| 768 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 769 |
|
| 770 |
/* |
| 771 |
* We must wait for this command to complete before another |
| 772 |
* command can be sent... but if we wait more than 3 seconds |
| 773 |
* then there is a problem. |
| 774 |
*/ |
| 775 |
|
| 776 |
err = |
| 777 |
wait_event_interruptible_timeout(priv->wait_command_queue, |
| 778 |
!(priv-> |
| 779 |
status & STATUS_CMD_ACTIVE), |
| 780 |
HOST_COMPLETE_TIMEOUT); |
| 781 |
|
| 782 |
if (err == 0) { |
| 783 |
IPW_DEBUG_INFO("Command completion failed out after %dms.\n", |
| 784 |
1000 * (HOST_COMPLETE_TIMEOUT / HZ)); |
| 785 |
priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT; |
| 786 |
priv->status &= ~STATUS_CMD_ACTIVE; |
| 787 |
schedule_reset(priv); |
| 788 |
return -EIO; |
| 789 |
} |
| 790 |
|
| 791 |
if (priv->fatal_error) { |
| 792 |
printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n", |
| 793 |
priv->net_dev->name); |
| 794 |
return -EIO; |
| 795 |
} |
| 796 |
|
| 797 |
/* !!!!! HACK TEST !!!!! |
| 798 |
* When lots of debug trace statements are enabled, the driver |
| 799 |
* doesn't seem to have as many firmware restart cycles... |
| 800 |
* |
| 801 |
* As a test, we're sticking in a 1/100s delay here */ |
| 802 |
schedule_timeout_uninterruptible(msecs_to_jiffies(10)); |
| 803 |
|
| 804 |
return 0; |
| 805 |
|
| 806 |
fail_unlock: |
| 807 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 808 |
|
| 809 |
return err; |
| 810 |
} |
| 811 |
|
| 812 |
/* |
| 813 |
* Verify the values and data access of the hardware |
| 814 |
* No locks needed or used. No functions called. |
| 815 |
*/ |
| 816 |
static int ipw2100_verify(struct ipw2100_priv *priv) |
| 817 |
{ |
| 818 |
u32 data1, data2; |
| 819 |
u32 address; |
| 820 |
|
| 821 |
u32 val1 = 0x76543210; |
| 822 |
u32 val2 = 0xFEDCBA98; |
| 823 |
|
| 824 |
/* Domain 0 check - all values should be DOA_DEBUG */ |
| 825 |
for (address = IPW_REG_DOA_DEBUG_AREA_START; |
| 826 |
address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) { |
| 827 |
read_register(priv->net_dev, address, &data1); |
| 828 |
if (data1 != IPW_DATA_DOA_DEBUG_VALUE) |
| 829 |
return -EIO; |
| 830 |
} |
| 831 |
|
| 832 |
/* Domain 1 check - use arbitrary read/write compare */ |
| 833 |
for (address = 0; address < 5; address++) { |
| 834 |
/* The memory area is not used now */ |
| 835 |
write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, |
| 836 |
val1); |
| 837 |
write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, |
| 838 |
val2); |
| 839 |
read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, |
| 840 |
&data1); |
| 841 |
read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, |
| 842 |
&data2); |
| 843 |
if (val1 == data1 && val2 == data2) |
| 844 |
return 0; |
| 845 |
} |
| 846 |
|
| 847 |
return -EIO; |
| 848 |
} |
| 849 |
|
| 850 |
/* |
| 851 |
* |
| 852 |
* Loop until the CARD_DISABLED bit is the same value as the |
| 853 |
* supplied parameter |
| 854 |
* |
| 855 |
* TODO: See if it would be more efficient to do a wait/wake |
| 856 |
* cycle and have the completion event trigger the wakeup |
| 857 |
* |
| 858 |
*/ |
| 859 |
#define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli |
| 860 |
static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state) |
| 861 |
{ |
| 862 |
int i; |
| 863 |
u32 card_state; |
| 864 |
u32 len = sizeof(card_state); |
| 865 |
int err; |
| 866 |
|
| 867 |
for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) { |
| 868 |
err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED, |
| 869 |
&card_state, &len); |
| 870 |
if (err) { |
| 871 |
IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal " |
| 872 |
"failed.\n"); |
| 873 |
return 0; |
| 874 |
} |
| 875 |
|
| 876 |
/* We'll break out if either the HW state says it is |
| 877 |
* in the state we want, or if HOST_COMPLETE command |
| 878 |
* finishes */ |
| 879 |
if ((card_state == state) || |
| 880 |
((priv->status & STATUS_ENABLED) ? |
| 881 |
IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) { |
| 882 |
if (state == IPW_HW_STATE_ENABLED) |
| 883 |
priv->status |= STATUS_ENABLED; |
| 884 |
else |
| 885 |
priv->status &= ~STATUS_ENABLED; |
| 886 |
|
| 887 |
return 0; |
| 888 |
} |
| 889 |
|
| 890 |
udelay(50); |
| 891 |
} |
| 892 |
|
| 893 |
IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n", |
| 894 |
state ? "DISABLED" : "ENABLED"); |
| 895 |
return -EIO; |
| 896 |
} |
| 897 |
|
| 898 |
/********************************************************************* |
| 899 |
Procedure : sw_reset_and_clock |
| 900 |
Purpose : Asserts s/w reset, asserts clock initialization |
| 901 |
and waits for clock stabilization |
| 902 |
********************************************************************/ |
| 903 |
static int sw_reset_and_clock(struct ipw2100_priv *priv) |
| 904 |
{ |
| 905 |
int i; |
| 906 |
u32 r; |
| 907 |
|
| 908 |
// assert s/w reset |
| 909 |
write_register(priv->net_dev, IPW_REG_RESET_REG, |
| 910 |
IPW_AUX_HOST_RESET_REG_SW_RESET); |
| 911 |
|
| 912 |
// wait for clock stabilization |
| 913 |
for (i = 0; i < 1000; i++) { |
| 914 |
udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY); |
| 915 |
|
| 916 |
// check clock ready bit |
| 917 |
read_register(priv->net_dev, IPW_REG_RESET_REG, &r); |
| 918 |
if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET) |
| 919 |
break; |
| 920 |
} |
| 921 |
|
| 922 |
if (i == 1000) |
| 923 |
return -EIO; // TODO: better error value |
| 924 |
|
| 925 |
/* set "initialization complete" bit to move adapter to |
| 926 |
* D0 state */ |
| 927 |
write_register(priv->net_dev, IPW_REG_GP_CNTRL, |
| 928 |
IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE); |
| 929 |
|
| 930 |
/* wait for clock stabilization */ |
| 931 |
for (i = 0; i < 10000; i++) { |
| 932 |
udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4); |
| 933 |
|
| 934 |
/* check clock ready bit */ |
| 935 |
read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); |
| 936 |
if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY) |
| 937 |
break; |
| 938 |
} |
| 939 |
|
| 940 |
if (i == 10000) |
| 941 |
return -EIO; /* TODO: better error value */ |
| 942 |
|
| 943 |
/* set D0 standby bit */ |
| 944 |
read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r); |
| 945 |
write_register(priv->net_dev, IPW_REG_GP_CNTRL, |
| 946 |
r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY); |
| 947 |
|
| 948 |
return 0; |
| 949 |
} |
| 950 |
|
| 951 |
/********************************************************************* |
| 952 |
Procedure : ipw2100_download_firmware |
| 953 |
Purpose : Initiaze adapter after power on. |
| 954 |
The sequence is: |
| 955 |
1. assert s/w reset first! |
| 956 |
2. awake clocks & wait for clock stabilization |
| 957 |
3. hold ARC (don't ask me why...) |
| 958 |
4. load Dino ucode and reset/clock init again |
| 959 |
5. zero-out shared mem |
| 960 |
6. download f/w |
| 961 |
*******************************************************************/ |
| 962 |
static int ipw2100_download_firmware(struct ipw2100_priv *priv) |
| 963 |
{ |
| 964 |
u32 address; |
| 965 |
int err; |
| 966 |
|
| 967 |
#ifndef CONFIG_PM |
| 968 |
/* Fetch the firmware and microcode */ |
| 969 |
struct ipw2100_fw ipw2100_firmware; |
| 970 |
#endif |
| 971 |
|
| 972 |
if (priv->fatal_error) { |
| 973 |
IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after " |
| 974 |
"fatal error %d. Interface must be brought down.\n", |
| 975 |
priv->net_dev->name, priv->fatal_error); |
| 976 |
return -EINVAL; |
| 977 |
} |
| 978 |
#ifdef CONFIG_PM |
| 979 |
if (!ipw2100_firmware.version) { |
| 980 |
err = ipw2100_get_firmware(priv, &ipw2100_firmware); |
| 981 |
if (err) { |
| 982 |
IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", |
| 983 |
priv->net_dev->name, err); |
| 984 |
priv->fatal_error = IPW2100_ERR_FW_LOAD; |
| 985 |
goto fail; |
| 986 |
} |
| 987 |
} |
| 988 |
#else |
| 989 |
err = ipw2100_get_firmware(priv, &ipw2100_firmware); |
| 990 |
if (err) { |
| 991 |
IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n", |
| 992 |
priv->net_dev->name, err); |
| 993 |
priv->fatal_error = IPW2100_ERR_FW_LOAD; |
| 994 |
goto fail; |
| 995 |
} |
| 996 |
#endif |
| 997 |
priv->firmware_version = ipw2100_firmware.version; |
| 998 |
|
| 999 |
/* s/w reset and clock stabilization */ |
| 1000 |
err = sw_reset_and_clock(priv); |
| 1001 |
if (err) { |
| 1002 |
IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n", |
| 1003 |
priv->net_dev->name, err); |
| 1004 |
goto fail; |
| 1005 |
} |
| 1006 |
|
| 1007 |
err = ipw2100_verify(priv); |
| 1008 |
if (err) { |
| 1009 |
IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n", |
| 1010 |
priv->net_dev->name, err); |
| 1011 |
goto fail; |
| 1012 |
} |
| 1013 |
|
| 1014 |
/* Hold ARC */ |
| 1015 |
write_nic_dword(priv->net_dev, |
| 1016 |
IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000); |
| 1017 |
|
| 1018 |
/* allow ARC to run */ |
| 1019 |
write_register(priv->net_dev, IPW_REG_RESET_REG, 0); |
| 1020 |
|
| 1021 |
/* load microcode */ |
| 1022 |
err = ipw2100_ucode_download(priv, &ipw2100_firmware); |
| 1023 |
if (err) { |
| 1024 |
printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n", |
| 1025 |
priv->net_dev->name, err); |
| 1026 |
goto fail; |
| 1027 |
} |
| 1028 |
|
| 1029 |
/* release ARC */ |
| 1030 |
write_nic_dword(priv->net_dev, |
| 1031 |
IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000); |
| 1032 |
|
| 1033 |
/* s/w reset and clock stabilization (again!!!) */ |
| 1034 |
err = sw_reset_and_clock(priv); |
| 1035 |
if (err) { |
| 1036 |
printk(KERN_ERR DRV_NAME |
| 1037 |
": %s: sw_reset_and_clock failed: %d\n", |
| 1038 |
priv->net_dev->name, err); |
| 1039 |
goto fail; |
| 1040 |
} |
| 1041 |
|
| 1042 |
/* load f/w */ |
| 1043 |
err = ipw2100_fw_download(priv, &ipw2100_firmware); |
| 1044 |
if (err) { |
| 1045 |
IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n", |
| 1046 |
priv->net_dev->name, err); |
| 1047 |
goto fail; |
| 1048 |
} |
| 1049 |
#ifndef CONFIG_PM |
| 1050 |
/* |
| 1051 |
* When the .resume method of the driver is called, the other |
| 1052 |
* part of the system, i.e. the ide driver could still stay in |
| 1053 |
* the suspend stage. This prevents us from loading the firmware |
| 1054 |
* from the disk. --YZ |
| 1055 |
*/ |
| 1056 |
|
| 1057 |
/* free any storage allocated for firmware image */ |
| 1058 |
ipw2100_release_firmware(priv, &ipw2100_firmware); |
| 1059 |
#endif |
| 1060 |
|
| 1061 |
/* zero out Domain 1 area indirectly (Si requirement) */ |
| 1062 |
for (address = IPW_HOST_FW_SHARED_AREA0; |
| 1063 |
address < IPW_HOST_FW_SHARED_AREA0_END; address += 4) |
| 1064 |
write_nic_dword(priv->net_dev, address, 0); |
| 1065 |
for (address = IPW_HOST_FW_SHARED_AREA1; |
| 1066 |
address < IPW_HOST_FW_SHARED_AREA1_END; address += 4) |
| 1067 |
write_nic_dword(priv->net_dev, address, 0); |
| 1068 |
for (address = IPW_HOST_FW_SHARED_AREA2; |
| 1069 |
address < IPW_HOST_FW_SHARED_AREA2_END; address += 4) |
| 1070 |
write_nic_dword(priv->net_dev, address, 0); |
| 1071 |
for (address = IPW_HOST_FW_SHARED_AREA3; |
| 1072 |
address < IPW_HOST_FW_SHARED_AREA3_END; address += 4) |
| 1073 |
write_nic_dword(priv->net_dev, address, 0); |
| 1074 |
for (address = IPW_HOST_FW_INTERRUPT_AREA; |
| 1075 |
address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4) |
| 1076 |
write_nic_dword(priv->net_dev, address, 0); |
| 1077 |
|
| 1078 |
return 0; |
| 1079 |
|
| 1080 |
fail: |
| 1081 |
ipw2100_release_firmware(priv, &ipw2100_firmware); |
| 1082 |
return err; |
| 1083 |
} |
| 1084 |
|
| 1085 |
static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv) |
| 1086 |
{ |
| 1087 |
if (priv->status & STATUS_INT_ENABLED) |
| 1088 |
return; |
| 1089 |
priv->status |= STATUS_INT_ENABLED; |
| 1090 |
write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK); |
| 1091 |
} |
| 1092 |
|
| 1093 |
static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv) |
| 1094 |
{ |
| 1095 |
if (!(priv->status & STATUS_INT_ENABLED)) |
| 1096 |
return; |
| 1097 |
priv->status &= ~STATUS_INT_ENABLED; |
| 1098 |
write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0); |
| 1099 |
} |
| 1100 |
|
| 1101 |
static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv) |
| 1102 |
{ |
| 1103 |
struct ipw2100_ordinals *ord = &priv->ordinals; |
| 1104 |
|
| 1105 |
IPW_DEBUG_INFO("enter\n"); |
| 1106 |
|
| 1107 |
read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1, |
| 1108 |
&ord->table1_addr); |
| 1109 |
|
| 1110 |
read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2, |
| 1111 |
&ord->table2_addr); |
| 1112 |
|
| 1113 |
read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size); |
| 1114 |
read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size); |
| 1115 |
|
| 1116 |
ord->table2_size &= 0x0000FFFF; |
| 1117 |
|
| 1118 |
IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size); |
| 1119 |
IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size); |
| 1120 |
IPW_DEBUG_INFO("exit\n"); |
| 1121 |
} |
| 1122 |
|
| 1123 |
static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv) |
| 1124 |
{ |
| 1125 |
u32 reg = 0; |
| 1126 |
/* |
| 1127 |
* Set GPIO 3 writable by FW; GPIO 1 writable |
| 1128 |
* by driver and enable clock |
| 1129 |
*/ |
| 1130 |
reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE | |
| 1131 |
IPW_BIT_GPIO_LED_OFF); |
| 1132 |
write_register(priv->net_dev, IPW_REG_GPIO, reg); |
| 1133 |
} |
| 1134 |
|
| 1135 |
static int rf_kill_active(struct ipw2100_priv *priv) |
| 1136 |
{ |
| 1137 |
#define MAX_RF_KILL_CHECKS 5 |
| 1138 |
#define RF_KILL_CHECK_DELAY 40 |
| 1139 |
|
| 1140 |
unsigned short value = 0; |
| 1141 |
u32 reg = 0; |
| 1142 |
int i; |
| 1143 |
|
| 1144 |
if (!(priv->hw_features & HW_FEATURE_RFKILL)) { |
| 1145 |
wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false); |
| 1146 |
priv->status &= ~STATUS_RF_KILL_HW; |
| 1147 |
return 0; |
| 1148 |
} |
| 1149 |
|
| 1150 |
for (i = 0; i < MAX_RF_KILL_CHECKS; i++) { |
| 1151 |
udelay(RF_KILL_CHECK_DELAY); |
| 1152 |
read_register(priv->net_dev, IPW_REG_GPIO, ®); |
| 1153 |
value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1); |
| 1154 |
} |
| 1155 |
|
| 1156 |
if (value == 0) { |
| 1157 |
wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true); |
| 1158 |
priv->status |= STATUS_RF_KILL_HW; |
| 1159 |
} else { |
| 1160 |
wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false); |
| 1161 |
priv->status &= ~STATUS_RF_KILL_HW; |
| 1162 |
} |
| 1163 |
|
| 1164 |
return (value == 0); |
| 1165 |
} |
| 1166 |
|
| 1167 |
static int ipw2100_get_hw_features(struct ipw2100_priv *priv) |
| 1168 |
{ |
| 1169 |
u32 addr, len; |
| 1170 |
u32 val; |
| 1171 |
|
| 1172 |
/* |
| 1173 |
* EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1 |
| 1174 |
*/ |
| 1175 |
len = sizeof(addr); |
| 1176 |
if (ipw2100_get_ordinal |
| 1177 |
(priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) { |
| 1178 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 1179 |
__LINE__); |
| 1180 |
return -EIO; |
| 1181 |
} |
| 1182 |
|
| 1183 |
IPW_DEBUG_INFO("EEPROM address: %08X\n", addr); |
| 1184 |
|
| 1185 |
/* |
| 1186 |
* EEPROM version is the byte at offset 0xfd in firmware |
| 1187 |
* We read 4 bytes, then shift out the byte we actually want */ |
| 1188 |
read_nic_dword(priv->net_dev, addr + 0xFC, &val); |
| 1189 |
priv->eeprom_version = (val >> 24) & 0xFF; |
| 1190 |
IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version); |
| 1191 |
|
| 1192 |
/* |
| 1193 |
* HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware |
| 1194 |
* |
| 1195 |
* notice that the EEPROM bit is reverse polarity, i.e. |
| 1196 |
* bit = 0 signifies HW RF kill switch is supported |
| 1197 |
* bit = 1 signifies HW RF kill switch is NOT supported |
| 1198 |
*/ |
| 1199 |
read_nic_dword(priv->net_dev, addr + 0x20, &val); |
| 1200 |
if (!((val >> 24) & 0x01)) |
| 1201 |
priv->hw_features |= HW_FEATURE_RFKILL; |
| 1202 |
|
| 1203 |
IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n", |
| 1204 |
(priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not "); |
| 1205 |
|
| 1206 |
return 0; |
| 1207 |
} |
| 1208 |
|
| 1209 |
/* |
| 1210 |
* Start firmware execution after power on and initialization |
| 1211 |
* The sequence is: |
| 1212 |
* 1. Release ARC |
| 1213 |
* 2. Wait for f/w initialization completes; |
| 1214 |
*/ |
| 1215 |
static int ipw2100_start_adapter(struct ipw2100_priv *priv) |
| 1216 |
{ |
| 1217 |
int i; |
| 1218 |
u32 inta, inta_mask, gpio; |
| 1219 |
|
| 1220 |
IPW_DEBUG_INFO("enter\n"); |
| 1221 |
|
| 1222 |
if (priv->status & STATUS_RUNNING) |
| 1223 |
return 0; |
| 1224 |
|
| 1225 |
/* |
| 1226 |
* Initialize the hw - drive adapter to DO state by setting |
| 1227 |
* init_done bit. Wait for clk_ready bit and Download |
| 1228 |
* fw & dino ucode |
| 1229 |
*/ |
| 1230 |
if (ipw2100_download_firmware(priv)) { |
| 1231 |
printk(KERN_ERR DRV_NAME |
| 1232 |
": %s: Failed to power on the adapter.\n", |
| 1233 |
priv->net_dev->name); |
| 1234 |
return -EIO; |
| 1235 |
} |
| 1236 |
|
| 1237 |
/* Clear the Tx, Rx and Msg queues and the r/w indexes |
| 1238 |
* in the firmware RBD and TBD ring queue */ |
| 1239 |
ipw2100_queues_initialize(priv); |
| 1240 |
|
| 1241 |
ipw2100_hw_set_gpio(priv); |
| 1242 |
|
| 1243 |
/* TODO -- Look at disabling interrupts here to make sure none |
| 1244 |
* get fired during FW initialization */ |
| 1245 |
|
| 1246 |
/* Release ARC - clear reset bit */ |
| 1247 |
write_register(priv->net_dev, IPW_REG_RESET_REG, 0); |
| 1248 |
|
| 1249 |
/* wait for f/w initialization complete */ |
| 1250 |
IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); |
| 1251 |
i = 5000; |
| 1252 |
do { |
| 1253 |
schedule_timeout_uninterruptible(msecs_to_jiffies(40)); |
| 1254 |
/* Todo... wait for sync command ... */ |
| 1255 |
|
| 1256 |
read_register(priv->net_dev, IPW_REG_INTA, &inta); |
| 1257 |
|
| 1258 |
/* check "init done" bit */ |
| 1259 |
if (inta & IPW2100_INTA_FW_INIT_DONE) { |
| 1260 |
/* reset "init done" bit */ |
| 1261 |
write_register(priv->net_dev, IPW_REG_INTA, |
| 1262 |
IPW2100_INTA_FW_INIT_DONE); |
| 1263 |
break; |
| 1264 |
} |
| 1265 |
|
| 1266 |
/* check error conditions : we check these after the firmware |
| 1267 |
* check so that if there is an error, the interrupt handler |
| 1268 |
* will see it and the adapter will be reset */ |
| 1269 |
if (inta & |
| 1270 |
(IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) { |
| 1271 |
/* clear error conditions */ |
| 1272 |
write_register(priv->net_dev, IPW_REG_INTA, |
| 1273 |
IPW2100_INTA_FATAL_ERROR | |
| 1274 |
IPW2100_INTA_PARITY_ERROR); |
| 1275 |
} |
| 1276 |
} while (--i); |
| 1277 |
|
| 1278 |
/* Clear out any pending INTAs since we aren't supposed to have |
| 1279 |
* interrupts enabled at this point... */ |
| 1280 |
read_register(priv->net_dev, IPW_REG_INTA, &inta); |
| 1281 |
read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); |
| 1282 |
inta &= IPW_INTERRUPT_MASK; |
| 1283 |
/* Clear out any pending interrupts */ |
| 1284 |
if (inta & inta_mask) |
| 1285 |
write_register(priv->net_dev, IPW_REG_INTA, inta); |
| 1286 |
|
| 1287 |
IPW_DEBUG_FW("f/w initialization complete: %s\n", |
| 1288 |
i ? "SUCCESS" : "FAILED"); |
| 1289 |
|
| 1290 |
if (!i) { |
| 1291 |
printk(KERN_WARNING DRV_NAME |
| 1292 |
": %s: Firmware did not initialize.\n", |
| 1293 |
priv->net_dev->name); |
| 1294 |
return -EIO; |
| 1295 |
} |
| 1296 |
|
| 1297 |
/* allow firmware to write to GPIO1 & GPIO3 */ |
| 1298 |
read_register(priv->net_dev, IPW_REG_GPIO, &gpio); |
| 1299 |
|
| 1300 |
gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK); |
| 1301 |
|
| 1302 |
write_register(priv->net_dev, IPW_REG_GPIO, gpio); |
| 1303 |
|
| 1304 |
/* Ready to receive commands */ |
| 1305 |
priv->status |= STATUS_RUNNING; |
| 1306 |
|
| 1307 |
/* The adapter has been reset; we are not associated */ |
| 1308 |
priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED); |
| 1309 |
|
| 1310 |
IPW_DEBUG_INFO("exit\n"); |
| 1311 |
|
| 1312 |
return 0; |
| 1313 |
} |
| 1314 |
|
| 1315 |
static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv) |
| 1316 |
{ |
| 1317 |
if (!priv->fatal_error) |
| 1318 |
return; |
| 1319 |
|
| 1320 |
priv->fatal_errors[priv->fatal_index++] = priv->fatal_error; |
| 1321 |
priv->fatal_index %= IPW2100_ERROR_QUEUE; |
| 1322 |
priv->fatal_error = 0; |
| 1323 |
} |
| 1324 |
|
| 1325 |
/* NOTE: Our interrupt is disabled when this method is called */ |
| 1326 |
static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) |
| 1327 |
{ |
| 1328 |
u32 reg; |
| 1329 |
int i; |
| 1330 |
|
| 1331 |
IPW_DEBUG_INFO("Power cycling the hardware.\n"); |
| 1332 |
|
| 1333 |
ipw2100_hw_set_gpio(priv); |
| 1334 |
|
| 1335 |
/* Step 1. Stop Master Assert */ |
| 1336 |
write_register(priv->net_dev, IPW_REG_RESET_REG, |
| 1337 |
IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
| 1338 |
|
| 1339 |
/* Step 2. Wait for stop Master Assert |
| 1340 |
* (not more than 50us, otherwise ret error */ |
| 1341 |
i = 5; |
| 1342 |
do { |
| 1343 |
udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); |
| 1344 |
read_register(priv->net_dev, IPW_REG_RESET_REG, ®); |
| 1345 |
|
| 1346 |
if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
| 1347 |
break; |
| 1348 |
} while (--i); |
| 1349 |
|
| 1350 |
priv->status &= ~STATUS_RESET_PENDING; |
| 1351 |
|
| 1352 |
if (!i) { |
| 1353 |
IPW_DEBUG_INFO |
| 1354 |
("exit - waited too long for master assert stop\n"); |
| 1355 |
return -EIO; |
| 1356 |
} |
| 1357 |
|
| 1358 |
write_register(priv->net_dev, IPW_REG_RESET_REG, |
| 1359 |
IPW_AUX_HOST_RESET_REG_SW_RESET); |
| 1360 |
|
| 1361 |
/* Reset any fatal_error conditions */ |
| 1362 |
ipw2100_reset_fatalerror(priv); |
| 1363 |
|
| 1364 |
/* At this point, the adapter is now stopped and disabled */ |
| 1365 |
priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING | |
| 1366 |
STATUS_ASSOCIATED | STATUS_ENABLED); |
| 1367 |
|
| 1368 |
return 0; |
| 1369 |
} |
| 1370 |
|
| 1371 |
/* |
| 1372 |
* Send the CARD_DISABLE_PHY_OFF command to the card to disable it |
| 1373 |
* |
| 1374 |
* After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent. |
| 1375 |
* |
| 1376 |
* STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of |
| 1377 |
* if STATUS_ASSN_LOST is sent. |
| 1378 |
*/ |
| 1379 |
static int ipw2100_hw_phy_off(struct ipw2100_priv *priv) |
| 1380 |
{ |
| 1381 |
|
| 1382 |
#define HW_PHY_OFF_LOOP_DELAY (msecs_to_jiffies(50)) |
| 1383 |
|
| 1384 |
struct host_command cmd = { |
| 1385 |
.host_command = CARD_DISABLE_PHY_OFF, |
| 1386 |
.host_command_sequence = 0, |
| 1387 |
.host_command_length = 0, |
| 1388 |
}; |
| 1389 |
int err, i; |
| 1390 |
u32 val1, val2; |
| 1391 |
|
| 1392 |
IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n"); |
| 1393 |
|
| 1394 |
/* Turn off the radio */ |
| 1395 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 1396 |
if (err) |
| 1397 |
return err; |
| 1398 |
|
| 1399 |
for (i = 0; i < 2500; i++) { |
| 1400 |
read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1); |
| 1401 |
read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2); |
| 1402 |
|
| 1403 |
if ((val1 & IPW2100_CONTROL_PHY_OFF) && |
| 1404 |
(val2 & IPW2100_COMMAND_PHY_OFF)) |
| 1405 |
return 0; |
| 1406 |
|
| 1407 |
schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY); |
| 1408 |
} |
| 1409 |
|
| 1410 |
return -EIO; |
| 1411 |
} |
| 1412 |
|
| 1413 |
static int ipw2100_enable_adapter(struct ipw2100_priv *priv) |
| 1414 |
{ |
| 1415 |
struct host_command cmd = { |
| 1416 |
.host_command = HOST_COMPLETE, |
| 1417 |
.host_command_sequence = 0, |
| 1418 |
.host_command_length = 0 |
| 1419 |
}; |
| 1420 |
int err = 0; |
| 1421 |
|
| 1422 |
IPW_DEBUG_HC("HOST_COMPLETE\n"); |
| 1423 |
|
| 1424 |
if (priv->status & STATUS_ENABLED) |
| 1425 |
return 0; |
| 1426 |
|
| 1427 |
mutex_lock(&priv->adapter_mutex); |
| 1428 |
|
| 1429 |
if (rf_kill_active(priv)) { |
| 1430 |
IPW_DEBUG_HC("Command aborted due to RF kill active.\n"); |
| 1431 |
goto fail_up; |
| 1432 |
} |
| 1433 |
|
| 1434 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 1435 |
if (err) { |
| 1436 |
IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n"); |
| 1437 |
goto fail_up; |
| 1438 |
} |
| 1439 |
|
| 1440 |
err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED); |
| 1441 |
if (err) { |
| 1442 |
IPW_DEBUG_INFO("%s: card not responding to init command.\n", |
| 1443 |
priv->net_dev->name); |
| 1444 |
goto fail_up; |
| 1445 |
} |
| 1446 |
|
| 1447 |
if (priv->stop_hang_check) { |
| 1448 |
priv->stop_hang_check = 0; |
| 1449 |
schedule_delayed_work(&priv->hang_check, HZ / 2); |
| 1450 |
} |
| 1451 |
|
| 1452 |
fail_up: |
| 1453 |
mutex_unlock(&priv->adapter_mutex); |
| 1454 |
return err; |
| 1455 |
} |
| 1456 |
|
| 1457 |
static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) |
| 1458 |
{ |
| 1459 |
#define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100)) |
| 1460 |
|
| 1461 |
struct host_command cmd = { |
| 1462 |
.host_command = HOST_PRE_POWER_DOWN, |
| 1463 |
.host_command_sequence = 0, |
| 1464 |
.host_command_length = 0, |
| 1465 |
}; |
| 1466 |
int err, i; |
| 1467 |
u32 reg; |
| 1468 |
|
| 1469 |
if (!(priv->status & STATUS_RUNNING)) |
| 1470 |
return 0; |
| 1471 |
|
| 1472 |
priv->status |= STATUS_STOPPING; |
| 1473 |
|
| 1474 |
/* We can only shut down the card if the firmware is operational. So, |
| 1475 |
* if we haven't reset since a fatal_error, then we can not send the |
| 1476 |
* shutdown commands. */ |
| 1477 |
if (!priv->fatal_error) { |
| 1478 |
/* First, make sure the adapter is enabled so that the PHY_OFF |
| 1479 |
* command can shut it down */ |
| 1480 |
ipw2100_enable_adapter(priv); |
| 1481 |
|
| 1482 |
err = ipw2100_hw_phy_off(priv); |
| 1483 |
if (err) |
| 1484 |
printk(KERN_WARNING DRV_NAME |
| 1485 |
": Error disabling radio %d\n", err); |
| 1486 |
|
| 1487 |
/* |
| 1488 |
* If in D0-standby mode going directly to D3 may cause a |
| 1489 |
* PCI bus violation. Therefore we must change out of the D0 |
| 1490 |
* state. |
| 1491 |
* |
| 1492 |
* Sending the PREPARE_FOR_POWER_DOWN will restrict the |
| 1493 |
* hardware from going into standby mode and will transition |
| 1494 |
* out of D0-standby if it is already in that state. |
| 1495 |
* |
| 1496 |
* STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the |
| 1497 |
* driver upon completion. Once received, the driver can |
| 1498 |
* proceed to the D3 state. |
| 1499 |
* |
| 1500 |
* Prepare for power down command to fw. This command would |
| 1501 |
* take HW out of D0-standby and prepare it for D3 state. |
| 1502 |
* |
| 1503 |
* Currently FW does not support event notification for this |
| 1504 |
* event. Therefore, skip waiting for it. Just wait a fixed |
| 1505 |
* 100ms |
| 1506 |
*/ |
| 1507 |
IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n"); |
| 1508 |
|
| 1509 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 1510 |
if (err) |
| 1511 |
printk(KERN_WARNING DRV_NAME ": " |
| 1512 |
"%s: Power down command failed: Error %d\n", |
| 1513 |
priv->net_dev->name, err); |
| 1514 |
else |
| 1515 |
schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY); |
| 1516 |
} |
| 1517 |
|
| 1518 |
priv->status &= ~STATUS_ENABLED; |
| 1519 |
|
| 1520 |
/* |
| 1521 |
* Set GPIO 3 writable by FW; GPIO 1 writable |
| 1522 |
* by driver and enable clock |
| 1523 |
*/ |
| 1524 |
ipw2100_hw_set_gpio(priv); |
| 1525 |
|
| 1526 |
/* |
| 1527 |
* Power down adapter. Sequence: |
| 1528 |
* 1. Stop master assert (RESET_REG[9]=1) |
| 1529 |
* 2. Wait for stop master (RESET_REG[8]==1) |
| 1530 |
* 3. S/w reset assert (RESET_REG[7] = 1) |
| 1531 |
*/ |
| 1532 |
|
| 1533 |
/* Stop master assert */ |
| 1534 |
write_register(priv->net_dev, IPW_REG_RESET_REG, |
| 1535 |
IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
| 1536 |
|
| 1537 |
/* wait stop master not more than 50 usec. |
| 1538 |
* Otherwise return error. */ |
| 1539 |
for (i = 5; i > 0; i--) { |
| 1540 |
udelay(10); |
| 1541 |
|
| 1542 |
/* Check master stop bit */ |
| 1543 |
read_register(priv->net_dev, IPW_REG_RESET_REG, ®); |
| 1544 |
|
| 1545 |
if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
| 1546 |
break; |
| 1547 |
} |
| 1548 |
|
| 1549 |
if (i == 0) |
| 1550 |
printk(KERN_WARNING DRV_NAME |
| 1551 |
": %s: Could now power down adapter.\n", |
| 1552 |
priv->net_dev->name); |
| 1553 |
|
| 1554 |
/* assert s/w reset */ |
| 1555 |
write_register(priv->net_dev, IPW_REG_RESET_REG, |
| 1556 |
IPW_AUX_HOST_RESET_REG_SW_RESET); |
| 1557 |
|
| 1558 |
priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING); |
| 1559 |
|
| 1560 |
return 0; |
| 1561 |
} |
| 1562 |
|
| 1563 |
static int ipw2100_disable_adapter(struct ipw2100_priv *priv) |
| 1564 |
{ |
| 1565 |
struct host_command cmd = { |
| 1566 |
.host_command = CARD_DISABLE, |
| 1567 |
.host_command_sequence = 0, |
| 1568 |
.host_command_length = 0 |
| 1569 |
}; |
| 1570 |
int err = 0; |
| 1571 |
|
| 1572 |
IPW_DEBUG_HC("CARD_DISABLE\n"); |
| 1573 |
|
| 1574 |
if (!(priv->status & STATUS_ENABLED)) |
| 1575 |
return 0; |
| 1576 |
|
| 1577 |
/* Make sure we clear the associated state */ |
| 1578 |
priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| 1579 |
|
| 1580 |
if (!priv->stop_hang_check) { |
| 1581 |
priv->stop_hang_check = 1; |
| 1582 |
cancel_delayed_work(&priv->hang_check); |
| 1583 |
} |
| 1584 |
|
| 1585 |
mutex_lock(&priv->adapter_mutex); |
| 1586 |
|
| 1587 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 1588 |
if (err) { |
| 1589 |
printk(KERN_WARNING DRV_NAME |
| 1590 |
": exit - failed to send CARD_DISABLE command\n"); |
| 1591 |
goto fail_up; |
| 1592 |
} |
| 1593 |
|
| 1594 |
err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED); |
| 1595 |
if (err) { |
| 1596 |
printk(KERN_WARNING DRV_NAME |
| 1597 |
": exit - card failed to change to DISABLED\n"); |
| 1598 |
goto fail_up; |
| 1599 |
} |
| 1600 |
|
| 1601 |
IPW_DEBUG_INFO("TODO: implement scan state machine\n"); |
| 1602 |
|
| 1603 |
fail_up: |
| 1604 |
mutex_unlock(&priv->adapter_mutex); |
| 1605 |
return err; |
| 1606 |
} |
| 1607 |
|
| 1608 |
static int ipw2100_set_scan_options(struct ipw2100_priv *priv) |
| 1609 |
{ |
| 1610 |
struct host_command cmd = { |
| 1611 |
.host_command = SET_SCAN_OPTIONS, |
| 1612 |
.host_command_sequence = 0, |
| 1613 |
.host_command_length = 8 |
| 1614 |
}; |
| 1615 |
int err; |
| 1616 |
|
| 1617 |
IPW_DEBUG_INFO("enter\n"); |
| 1618 |
|
| 1619 |
IPW_DEBUG_SCAN("setting scan options\n"); |
| 1620 |
|
| 1621 |
cmd.host_command_parameters[0] = 0; |
| 1622 |
|
| 1623 |
if (!(priv->config & CFG_ASSOCIATE)) |
| 1624 |
cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE; |
| 1625 |
if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled) |
| 1626 |
cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL; |
| 1627 |
if (priv->config & CFG_PASSIVE_SCAN) |
| 1628 |
cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE; |
| 1629 |
|
| 1630 |
cmd.host_command_parameters[1] = priv->channel_mask; |
| 1631 |
|
| 1632 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 1633 |
|
| 1634 |
IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n", |
| 1635 |
cmd.host_command_parameters[0]); |
| 1636 |
|
| 1637 |
return err; |
| 1638 |
} |
| 1639 |
|
| 1640 |
static int ipw2100_start_scan(struct ipw2100_priv *priv) |
| 1641 |
{ |
| 1642 |
struct host_command cmd = { |
| 1643 |
.host_command = BROADCAST_SCAN, |
| 1644 |
.host_command_sequence = 0, |
| 1645 |
.host_command_length = 4 |
| 1646 |
}; |
| 1647 |
int err; |
| 1648 |
|
| 1649 |
IPW_DEBUG_HC("START_SCAN\n"); |
| 1650 |
|
| 1651 |
cmd.host_command_parameters[0] = 0; |
| 1652 |
|
| 1653 |
/* No scanning if in monitor mode */ |
| 1654 |
if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
| 1655 |
return 1; |
| 1656 |
|
| 1657 |
if (priv->status & STATUS_SCANNING) { |
| 1658 |
IPW_DEBUG_SCAN("Scan requested while already in scan...\n"); |
| 1659 |
return 0; |
| 1660 |
} |
| 1661 |
|
| 1662 |
IPW_DEBUG_INFO("enter\n"); |
| 1663 |
|
| 1664 |
/* Not clearing here; doing so makes iwlist always return nothing... |
| 1665 |
* |
| 1666 |
* We should modify the table logic to use aging tables vs. clearing |
| 1667 |
* the table on each scan start. |
| 1668 |
*/ |
| 1669 |
IPW_DEBUG_SCAN("starting scan\n"); |
| 1670 |
|
| 1671 |
priv->status |= STATUS_SCANNING; |
| 1672 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 1673 |
if (err) |
| 1674 |
priv->status &= ~STATUS_SCANNING; |
| 1675 |
|
| 1676 |
IPW_DEBUG_INFO("exit\n"); |
| 1677 |
|
| 1678 |
return err; |
| 1679 |
} |
| 1680 |
|
| 1681 |
static const struct libipw_geo ipw_geos[] = { |
| 1682 |
{ /* Restricted */ |
| 1683 |
"---", |
| 1684 |
.bg_channels = 14, |
| 1685 |
.bg = {{2412, 1}, {2417, 2}, {2422, 3}, |
| 1686 |
{2427, 4}, {2432, 5}, {2437, 6}, |
| 1687 |
{2442, 7}, {2447, 8}, {2452, 9}, |
| 1688 |
{2457, 10}, {2462, 11}, {2467, 12}, |
| 1689 |
{2472, 13}, {2484, 14}}, |
| 1690 |
}, |
| 1691 |
}; |
| 1692 |
|
| 1693 |
static int ipw2100_up(struct ipw2100_priv *priv, int deferred) |
| 1694 |
{ |
| 1695 |
unsigned long flags; |
| 1696 |
int err = 0; |
| 1697 |
u32 lock; |
| 1698 |
u32 ord_len = sizeof(lock); |
| 1699 |
|
| 1700 |
/* Age scan list entries found before suspend */ |
| 1701 |
if (priv->suspend_time) { |
| 1702 |
libipw_networks_age(priv->ieee, priv->suspend_time); |
| 1703 |
priv->suspend_time = 0; |
| 1704 |
} |
| 1705 |
|
| 1706 |
/* Quiet if manually disabled. */ |
| 1707 |
if (priv->status & STATUS_RF_KILL_SW) { |
| 1708 |
IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable " |
| 1709 |
"switch\n", priv->net_dev->name); |
| 1710 |
return 0; |
| 1711 |
} |
| 1712 |
|
| 1713 |
/* the ipw2100 hardware really doesn't want power management delays |
| 1714 |
* longer than 175usec |
| 1715 |
*/ |
| 1716 |
cpu_latency_qos_update_request(&ipw2100_pm_qos_req, 175); |
| 1717 |
|
| 1718 |
/* If the interrupt is enabled, turn it off... */ |
| 1719 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 1720 |
ipw2100_disable_interrupts(priv); |
| 1721 |
|
| 1722 |
/* Reset any fatal_error conditions */ |
| 1723 |
ipw2100_reset_fatalerror(priv); |
| 1724 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 1725 |
|
| 1726 |
if (priv->status & STATUS_POWERED || |
| 1727 |
(priv->status & STATUS_RESET_PENDING)) { |
| 1728 |
/* Power cycle the card ... */ |
| 1729 |
err = ipw2100_power_cycle_adapter(priv); |
| 1730 |
if (err) { |
| 1731 |
printk(KERN_WARNING DRV_NAME |
| 1732 |
": %s: Could not cycle adapter.\n", |
| 1733 |
priv->net_dev->name); |
| 1734 |
goto exit; |
| 1735 |
} |
| 1736 |
} else |
| 1737 |
priv->status |= STATUS_POWERED; |
| 1738 |
|
| 1739 |
/* Load the firmware, start the clocks, etc. */ |
| 1740 |
err = ipw2100_start_adapter(priv); |
| 1741 |
if (err) { |
| 1742 |
printk(KERN_ERR DRV_NAME |
| 1743 |
": %s: Failed to start the firmware.\n", |
| 1744 |
priv->net_dev->name); |
| 1745 |
goto exit; |
| 1746 |
} |
| 1747 |
|
| 1748 |
ipw2100_initialize_ordinals(priv); |
| 1749 |
|
| 1750 |
/* Determine capabilities of this particular HW configuration */ |
| 1751 |
err = ipw2100_get_hw_features(priv); |
| 1752 |
if (err) { |
| 1753 |
printk(KERN_ERR DRV_NAME |
| 1754 |
": %s: Failed to determine HW features.\n", |
| 1755 |
priv->net_dev->name); |
| 1756 |
goto exit; |
| 1757 |
} |
| 1758 |
|
| 1759 |
/* Initialize the geo */ |
| 1760 |
libipw_set_geo(priv->ieee, &ipw_geos[0]); |
| 1761 |
priv->ieee->freq_band = LIBIPW_24GHZ_BAND; |
| 1762 |
|
| 1763 |
lock = LOCK_NONE; |
| 1764 |
err = ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len); |
| 1765 |
if (err) { |
| 1766 |
printk(KERN_ERR DRV_NAME |
| 1767 |
": %s: Failed to clear ordinal lock.\n", |
| 1768 |
priv->net_dev->name); |
| 1769 |
goto exit; |
| 1770 |
} |
| 1771 |
|
| 1772 |
priv->status &= ~STATUS_SCANNING; |
| 1773 |
|
| 1774 |
if (rf_kill_active(priv)) { |
| 1775 |
printk(KERN_INFO "%s: Radio is disabled by RF switch.\n", |
| 1776 |
priv->net_dev->name); |
| 1777 |
|
| 1778 |
if (priv->stop_rf_kill) { |
| 1779 |
priv->stop_rf_kill = 0; |
| 1780 |
schedule_delayed_work(&priv->rf_kill, |
| 1781 |
round_jiffies_relative(HZ)); |
| 1782 |
} |
| 1783 |
|
| 1784 |
deferred = 1; |
| 1785 |
} |
| 1786 |
|
| 1787 |
/* Turn on the interrupt so that commands can be processed */ |
| 1788 |
ipw2100_enable_interrupts(priv); |
| 1789 |
|
| 1790 |
/* Send all of the commands that must be sent prior to |
| 1791 |
* HOST_COMPLETE */ |
| 1792 |
err = ipw2100_adapter_setup(priv); |
| 1793 |
if (err) { |
| 1794 |
printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n", |
| 1795 |
priv->net_dev->name); |
| 1796 |
goto exit; |
| 1797 |
} |
| 1798 |
|
| 1799 |
if (!deferred) { |
| 1800 |
/* Enable the adapter - sends HOST_COMPLETE */ |
| 1801 |
err = ipw2100_enable_adapter(priv); |
| 1802 |
if (err) { |
| 1803 |
printk(KERN_ERR DRV_NAME ": " |
| 1804 |
"%s: failed in call to enable adapter.\n", |
| 1805 |
priv->net_dev->name); |
| 1806 |
ipw2100_hw_stop_adapter(priv); |
| 1807 |
goto exit; |
| 1808 |
} |
| 1809 |
|
| 1810 |
/* Start a scan . . . */ |
| 1811 |
ipw2100_set_scan_options(priv); |
| 1812 |
ipw2100_start_scan(priv); |
| 1813 |
} |
| 1814 |
|
| 1815 |
exit: |
| 1816 |
return err; |
| 1817 |
} |
| 1818 |
|
| 1819 |
static void ipw2100_down(struct ipw2100_priv *priv) |
| 1820 |
{ |
| 1821 |
unsigned long flags; |
| 1822 |
union iwreq_data wrqu = { |
| 1823 |
.ap_addr = { |
| 1824 |
.sa_family = ARPHRD_ETHER} |
| 1825 |
}; |
| 1826 |
int associated = priv->status & STATUS_ASSOCIATED; |
| 1827 |
|
| 1828 |
/* Kill the RF switch timer */ |
| 1829 |
if (!priv->stop_rf_kill) { |
| 1830 |
priv->stop_rf_kill = 1; |
| 1831 |
cancel_delayed_work(&priv->rf_kill); |
| 1832 |
} |
| 1833 |
|
| 1834 |
/* Kill the firmware hang check timer */ |
| 1835 |
if (!priv->stop_hang_check) { |
| 1836 |
priv->stop_hang_check = 1; |
| 1837 |
cancel_delayed_work(&priv->hang_check); |
| 1838 |
} |
| 1839 |
|
| 1840 |
/* Kill any pending resets */ |
| 1841 |
if (priv->status & STATUS_RESET_PENDING) |
| 1842 |
cancel_delayed_work(&priv->reset_work); |
| 1843 |
|
| 1844 |
/* Make sure the interrupt is on so that FW commands will be |
| 1845 |
* processed correctly */ |
| 1846 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 1847 |
ipw2100_enable_interrupts(priv); |
| 1848 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 1849 |
|
| 1850 |
if (ipw2100_hw_stop_adapter(priv)) |
| 1851 |
printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n", |
| 1852 |
priv->net_dev->name); |
| 1853 |
|
| 1854 |
/* Do not disable the interrupt until _after_ we disable |
| 1855 |
* the adaptor. Otherwise the CARD_DISABLE command will never |
| 1856 |
* be ack'd by the firmware */ |
| 1857 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 1858 |
ipw2100_disable_interrupts(priv); |
| 1859 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 1860 |
|
| 1861 |
cpu_latency_qos_update_request(&ipw2100_pm_qos_req, |
| 1862 |
PM_QOS_DEFAULT_VALUE); |
| 1863 |
|
| 1864 |
/* We have to signal any supplicant if we are disassociating */ |
| 1865 |
if (associated) |
| 1866 |
wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); |
| 1867 |
|
| 1868 |
priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| 1869 |
netif_carrier_off(priv->net_dev); |
| 1870 |
netif_stop_queue(priv->net_dev); |
| 1871 |
} |
| 1872 |
|
| 1873 |
static int ipw2100_wdev_init(struct net_device *dev) |
| 1874 |
{ |
| 1875 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 1876 |
const struct libipw_geo *geo = libipw_get_geo(priv->ieee); |
| 1877 |
struct wireless_dev *wdev = &priv->ieee->wdev; |
| 1878 |
int i; |
| 1879 |
|
| 1880 |
memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); |
| 1881 |
|
| 1882 |
/* fill-out priv->ieee->bg_band */ |
| 1883 |
if (geo->bg_channels) { |
| 1884 |
struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; |
| 1885 |
|
| 1886 |
bg_band->band = NL80211_BAND_2GHZ; |
| 1887 |
bg_band->n_channels = geo->bg_channels; |
| 1888 |
bg_band->channels = kzalloc_objs(struct ieee80211_channel, |
| 1889 |
geo->bg_channels); |
| 1890 |
if (!bg_band->channels) { |
| 1891 |
ipw2100_down(priv); |
| 1892 |
return -ENOMEM; |
| 1893 |
} |
| 1894 |
/* translate geo->bg to bg_band.channels */ |
| 1895 |
for (i = 0; i < geo->bg_channels; i++) { |
| 1896 |
bg_band->channels[i].band = NL80211_BAND_2GHZ; |
| 1897 |
bg_band->channels[i].center_freq = geo->bg[i].freq; |
| 1898 |
bg_band->channels[i].hw_value = geo->bg[i].channel; |
| 1899 |
bg_band->channels[i].max_power = geo->bg[i].max_power; |
| 1900 |
if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) |
| 1901 |
bg_band->channels[i].flags |= |
| 1902 |
IEEE80211_CHAN_NO_IR; |
| 1903 |
if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) |
| 1904 |
bg_band->channels[i].flags |= |
| 1905 |
IEEE80211_CHAN_NO_IR; |
| 1906 |
if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) |
| 1907 |
bg_band->channels[i].flags |= |
| 1908 |
IEEE80211_CHAN_RADAR; |
| 1909 |
/* No equivalent for LIBIPW_CH_80211H_RULES, |
| 1910 |
LIBIPW_CH_UNIFORM_SPREADING, or |
| 1911 |
LIBIPW_CH_B_ONLY... */ |
| 1912 |
} |
| 1913 |
/* point at bitrate info */ |
| 1914 |
bg_band->bitrates = ipw2100_bg_rates; |
| 1915 |
bg_band->n_bitrates = RATE_COUNT; |
| 1916 |
|
| 1917 |
wdev->wiphy->bands[NL80211_BAND_2GHZ] = bg_band; |
| 1918 |
} |
| 1919 |
|
| 1920 |
wdev->wiphy->cipher_suites = ipw_cipher_suites; |
| 1921 |
wdev->wiphy->n_cipher_suites = ARRAY_SIZE(ipw_cipher_suites); |
| 1922 |
|
| 1923 |
set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); |
| 1924 |
if (wiphy_register(wdev->wiphy)) |
| 1925 |
return -EIO; |
| 1926 |
return 0; |
| 1927 |
} |
| 1928 |
|
| 1929 |
static void ipw2100_reset_adapter(struct work_struct *work) |
| 1930 |
{ |
| 1931 |
struct ipw2100_priv *priv = |
| 1932 |
container_of(work, struct ipw2100_priv, reset_work.work); |
| 1933 |
unsigned long flags; |
| 1934 |
union iwreq_data wrqu = { |
| 1935 |
.ap_addr = { |
| 1936 |
.sa_family = ARPHRD_ETHER} |
| 1937 |
}; |
| 1938 |
int associated = priv->status & STATUS_ASSOCIATED; |
| 1939 |
|
| 1940 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 1941 |
IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name); |
| 1942 |
priv->resets++; |
| 1943 |
priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| 1944 |
priv->status |= STATUS_SECURITY_UPDATED; |
| 1945 |
|
| 1946 |
/* Force a power cycle even if interface hasn't been opened |
| 1947 |
* yet */ |
| 1948 |
cancel_delayed_work(&priv->reset_work); |
| 1949 |
priv->status |= STATUS_RESET_PENDING; |
| 1950 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 1951 |
|
| 1952 |
mutex_lock(&priv->action_mutex); |
| 1953 |
/* stop timed checks so that they don't interfere with reset */ |
| 1954 |
priv->stop_hang_check = 1; |
| 1955 |
cancel_delayed_work(&priv->hang_check); |
| 1956 |
|
| 1957 |
/* We have to signal any supplicant if we are disassociating */ |
| 1958 |
if (associated) |
| 1959 |
wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); |
| 1960 |
|
| 1961 |
ipw2100_up(priv, 0); |
| 1962 |
mutex_unlock(&priv->action_mutex); |
| 1963 |
|
| 1964 |
} |
| 1965 |
|
| 1966 |
static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) |
| 1967 |
{ |
| 1968 |
|
| 1969 |
#define MAC_ASSOCIATION_READ_DELAY (HZ) |
| 1970 |
int ret; |
| 1971 |
unsigned int len, essid_len; |
| 1972 |
char essid[IW_ESSID_MAX_SIZE]; |
| 1973 |
u32 txrate; |
| 1974 |
u32 chan; |
| 1975 |
char *txratename; |
| 1976 |
u8 bssid[ETH_ALEN]; |
| 1977 |
|
| 1978 |
/* |
| 1979 |
* TBD: BSSID is usually 00:00:00:00:00:00 here and not |
| 1980 |
* an actual MAC of the AP. Seems like FW sets this |
| 1981 |
* address too late. Read it later and expose through |
| 1982 |
* /proc or schedule a later task to query and update |
| 1983 |
*/ |
| 1984 |
|
| 1985 |
essid_len = IW_ESSID_MAX_SIZE; |
| 1986 |
ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, |
| 1987 |
essid, &essid_len); |
| 1988 |
if (ret) { |
| 1989 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 1990 |
__LINE__); |
| 1991 |
return; |
| 1992 |
} |
| 1993 |
|
| 1994 |
len = sizeof(u32); |
| 1995 |
ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len); |
| 1996 |
if (ret) { |
| 1997 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 1998 |
__LINE__); |
| 1999 |
return; |
| 2000 |
} |
| 2001 |
|
| 2002 |
len = sizeof(u32); |
| 2003 |
ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len); |
| 2004 |
if (ret) { |
| 2005 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 2006 |
__LINE__); |
| 2007 |
return; |
| 2008 |
} |
| 2009 |
len = ETH_ALEN; |
| 2010 |
ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid, |
| 2011 |
&len); |
| 2012 |
if (ret) { |
| 2013 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 2014 |
__LINE__); |
| 2015 |
return; |
| 2016 |
} |
| 2017 |
memcpy(priv->ieee->bssid, bssid, ETH_ALEN); |
| 2018 |
|
| 2019 |
switch (txrate) { |
| 2020 |
case TX_RATE_1_MBIT: |
| 2021 |
txratename = "1Mbps"; |
| 2022 |
break; |
| 2023 |
case TX_RATE_2_MBIT: |
| 2024 |
txratename = "2Mbsp"; |
| 2025 |
break; |
| 2026 |
case TX_RATE_5_5_MBIT: |
| 2027 |
txratename = "5.5Mbps"; |
| 2028 |
break; |
| 2029 |
case TX_RATE_11_MBIT: |
| 2030 |
txratename = "11Mbps"; |
| 2031 |
break; |
| 2032 |
default: |
| 2033 |
IPW_DEBUG_INFO("Unknown rate: %d\n", txrate); |
| 2034 |
txratename = "unknown rate"; |
| 2035 |
break; |
| 2036 |
} |
| 2037 |
|
| 2038 |
IPW_DEBUG_INFO("%s: Associated with '%*pE' at %s, channel %d (BSSID=%pM)\n", |
| 2039 |
priv->net_dev->name, essid_len, essid, |
| 2040 |
txratename, chan, bssid); |
| 2041 |
|
| 2042 |
/* now we copy read ssid into dev */ |
| 2043 |
if (!(priv->config & CFG_STATIC_ESSID)) { |
| 2044 |
priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE); |
| 2045 |
memcpy(priv->essid, essid, priv->essid_len); |
| 2046 |
} |
| 2047 |
priv->channel = chan; |
| 2048 |
memcpy(priv->bssid, bssid, ETH_ALEN); |
| 2049 |
|
| 2050 |
priv->status |= STATUS_ASSOCIATING; |
| 2051 |
priv->connect_start = ktime_get_boottime_seconds(); |
| 2052 |
|
| 2053 |
schedule_delayed_work(&priv->wx_event_work, HZ / 10); |
| 2054 |
} |
| 2055 |
|
| 2056 |
static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid, |
| 2057 |
int length, int batch_mode) |
| 2058 |
{ |
| 2059 |
int ssid_len = min(length, IW_ESSID_MAX_SIZE); |
| 2060 |
struct host_command cmd = { |
| 2061 |
.host_command = SSID, |
| 2062 |
.host_command_sequence = 0, |
| 2063 |
.host_command_length = ssid_len |
| 2064 |
}; |
| 2065 |
int err; |
| 2066 |
|
| 2067 |
IPW_DEBUG_HC("SSID: '%*pE'\n", ssid_len, essid); |
| 2068 |
|
| 2069 |
if (ssid_len) |
| 2070 |
memcpy(cmd.host_command_parameters, essid, ssid_len); |
| 2071 |
|
| 2072 |
if (!batch_mode) { |
| 2073 |
err = ipw2100_disable_adapter(priv); |
| 2074 |
if (err) |
| 2075 |
return err; |
| 2076 |
} |
| 2077 |
|
| 2078 |
/* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to |
| 2079 |
* disable auto association -- so we cheat by setting a bogus SSID */ |
| 2080 |
if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) { |
| 2081 |
int i; |
| 2082 |
u8 *bogus = (u8 *) cmd.host_command_parameters; |
| 2083 |
for (i = 0; i < IW_ESSID_MAX_SIZE; i++) |
| 2084 |
bogus[i] = 0x18 + i; |
| 2085 |
cmd.host_command_length = IW_ESSID_MAX_SIZE; |
| 2086 |
} |
| 2087 |
|
| 2088 |
/* NOTE: We always send the SSID command even if the provided ESSID is |
| 2089 |
* the same as what we currently think is set. */ |
| 2090 |
|
| 2091 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 2092 |
if (!err) { |
| 2093 |
memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len); |
| 2094 |
memcpy(priv->essid, essid, ssid_len); |
| 2095 |
priv->essid_len = ssid_len; |
| 2096 |
} |
| 2097 |
|
| 2098 |
if (!batch_mode) { |
| 2099 |
if (ipw2100_enable_adapter(priv)) |
| 2100 |
err = -EIO; |
| 2101 |
} |
| 2102 |
|
| 2103 |
return err; |
| 2104 |
} |
| 2105 |
|
| 2106 |
static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status) |
| 2107 |
{ |
| 2108 |
IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC, |
| 2109 |
"disassociated: '%*pE' %pM\n", priv->essid_len, priv->essid, |
| 2110 |
priv->bssid); |
| 2111 |
|
| 2112 |
priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
| 2113 |
|
| 2114 |
if (priv->status & STATUS_STOPPING) { |
| 2115 |
IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n"); |
| 2116 |
return; |
| 2117 |
} |
| 2118 |
|
| 2119 |
eth_zero_addr(priv->bssid); |
| 2120 |
eth_zero_addr(priv->ieee->bssid); |
| 2121 |
|
| 2122 |
netif_carrier_off(priv->net_dev); |
| 2123 |
netif_stop_queue(priv->net_dev); |
| 2124 |
|
| 2125 |
if (!(priv->status & STATUS_RUNNING)) |
| 2126 |
return; |
| 2127 |
|
| 2128 |
if (priv->status & STATUS_SECURITY_UPDATED) |
| 2129 |
schedule_delayed_work(&priv->security_work, 0); |
| 2130 |
|
| 2131 |
schedule_delayed_work(&priv->wx_event_work, 0); |
| 2132 |
} |
| 2133 |
|
| 2134 |
static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status) |
| 2135 |
{ |
| 2136 |
IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n", |
| 2137 |
priv->net_dev->name); |
| 2138 |
|
| 2139 |
/* RF_KILL is now enabled (else we wouldn't be here) */ |
| 2140 |
wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true); |
| 2141 |
priv->status |= STATUS_RF_KILL_HW; |
| 2142 |
|
| 2143 |
/* Make sure the RF Kill check timer is running */ |
| 2144 |
priv->stop_rf_kill = 0; |
| 2145 |
mod_delayed_work(system_percpu_wq, &priv->rf_kill, round_jiffies_relative(HZ)); |
| 2146 |
} |
| 2147 |
|
| 2148 |
static void ipw2100_scan_event(struct work_struct *work) |
| 2149 |
{ |
| 2150 |
struct ipw2100_priv *priv = container_of(work, struct ipw2100_priv, |
| 2151 |
scan_event.work); |
| 2152 |
union iwreq_data wrqu; |
| 2153 |
|
| 2154 |
wrqu.data.length = 0; |
| 2155 |
wrqu.data.flags = 0; |
| 2156 |
wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL); |
| 2157 |
} |
| 2158 |
|
| 2159 |
static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) |
| 2160 |
{ |
| 2161 |
IPW_DEBUG_SCAN("scan complete\n"); |
| 2162 |
/* Age the scan results... */ |
| 2163 |
priv->ieee->scans++; |
| 2164 |
priv->status &= ~STATUS_SCANNING; |
| 2165 |
|
| 2166 |
/* Only userspace-requested scan completion events go out immediately */ |
| 2167 |
if (!priv->user_requested_scan) { |
| 2168 |
schedule_delayed_work(&priv->scan_event, |
| 2169 |
round_jiffies_relative(msecs_to_jiffies(4000))); |
| 2170 |
} else { |
| 2171 |
priv->user_requested_scan = 0; |
| 2172 |
mod_delayed_work(system_percpu_wq, &priv->scan_event, 0); |
| 2173 |
} |
| 2174 |
} |
| 2175 |
|
| 2176 |
#ifdef CONFIG_IPW2100_DEBUG |
| 2177 |
#define IPW2100_HANDLER(v, f) { v, f, # v } |
| 2178 |
struct ipw2100_status_indicator { |
| 2179 |
int status; |
| 2180 |
void (*cb) (struct ipw2100_priv * priv, u32 status); |
| 2181 |
char *name; |
| 2182 |
}; |
| 2183 |
#else |
| 2184 |
#define IPW2100_HANDLER(v, f) { v, f } |
| 2185 |
struct ipw2100_status_indicator { |
| 2186 |
int status; |
| 2187 |
void (*cb) (struct ipw2100_priv * priv, u32 status); |
| 2188 |
}; |
| 2189 |
#endif /* CONFIG_IPW2100_DEBUG */ |
| 2190 |
|
| 2191 |
static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status) |
| 2192 |
{ |
| 2193 |
IPW_DEBUG_SCAN("Scanning...\n"); |
| 2194 |
priv->status |= STATUS_SCANNING; |
| 2195 |
} |
| 2196 |
|
| 2197 |
static const struct ipw2100_status_indicator status_handlers[] = { |
| 2198 |
IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL), |
| 2199 |
IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL), |
| 2200 |
IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated), |
| 2201 |
IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost), |
| 2202 |
IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL), |
| 2203 |
IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete), |
| 2204 |
IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL), |
| 2205 |
IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL), |
| 2206 |
IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill), |
| 2207 |
IPW2100_HANDLER(IPW_STATE_DISABLED, NULL), |
| 2208 |
IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL), |
| 2209 |
IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning), |
| 2210 |
IPW2100_HANDLER(-1, NULL) |
| 2211 |
}; |
| 2212 |
|
| 2213 |
static void isr_status_change(struct ipw2100_priv *priv, int status) |
| 2214 |
{ |
| 2215 |
int i; |
| 2216 |
|
| 2217 |
if (status == IPW_STATE_SCANNING && |
| 2218 |
priv->status & STATUS_ASSOCIATED && |
| 2219 |
!(priv->status & STATUS_SCANNING)) { |
| 2220 |
IPW_DEBUG_INFO("Scan detected while associated, with " |
| 2221 |
"no scan request. Restarting firmware.\n"); |
| 2222 |
|
| 2223 |
/* Wake up any sleeping jobs */ |
| 2224 |
schedule_reset(priv); |
| 2225 |
} |
| 2226 |
|
| 2227 |
for (i = 0; status_handlers[i].status != -1; i++) { |
| 2228 |
if (status == status_handlers[i].status) { |
| 2229 |
IPW_DEBUG_NOTIF("Status change: %s\n", |
| 2230 |
status_handlers[i].name); |
| 2231 |
if (status_handlers[i].cb) |
| 2232 |
status_handlers[i].cb(priv, status); |
| 2233 |
priv->wstats.status = status; |
| 2234 |
return; |
| 2235 |
} |
| 2236 |
} |
| 2237 |
|
| 2238 |
IPW_DEBUG_NOTIF("unknown status received: %04x\n", status); |
| 2239 |
} |
| 2240 |
|
| 2241 |
static void isr_rx_complete_command(struct ipw2100_priv *priv, |
| 2242 |
struct ipw2100_cmd_header *cmd) |
| 2243 |
{ |
| 2244 |
#ifdef CONFIG_IPW2100_DEBUG |
| 2245 |
if (cmd->host_command_reg < ARRAY_SIZE(command_types)) { |
| 2246 |
IPW_DEBUG_HC("Command completed '%s (%d)'\n", |
| 2247 |
command_types[cmd->host_command_reg], |
| 2248 |
cmd->host_command_reg); |
| 2249 |
} |
| 2250 |
#endif |
| 2251 |
if (cmd->host_command_reg == HOST_COMPLETE) |
| 2252 |
priv->status |= STATUS_ENABLED; |
| 2253 |
|
| 2254 |
if (cmd->host_command_reg == CARD_DISABLE) |
| 2255 |
priv->status &= ~STATUS_ENABLED; |
| 2256 |
|
| 2257 |
priv->status &= ~STATUS_CMD_ACTIVE; |
| 2258 |
|
| 2259 |
wake_up_interruptible(&priv->wait_command_queue); |
| 2260 |
} |
| 2261 |
|
| 2262 |
#ifdef CONFIG_IPW2100_DEBUG |
| 2263 |
static const char *frame_types[] = { |
| 2264 |
"COMMAND_STATUS_VAL", |
| 2265 |
"STATUS_CHANGE_VAL", |
| 2266 |
"P80211_DATA_VAL", |
| 2267 |
"P8023_DATA_VAL", |
| 2268 |
"HOST_NOTIFICATION_VAL" |
| 2269 |
}; |
| 2270 |
#endif |
| 2271 |
|
| 2272 |
static int ipw2100_alloc_skb(struct ipw2100_priv *priv, |
| 2273 |
struct ipw2100_rx_packet *packet) |
| 2274 |
{ |
| 2275 |
packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx)); |
| 2276 |
if (!packet->skb) |
| 2277 |
return -ENOMEM; |
| 2278 |
|
| 2279 |
packet->rxp = (struct ipw2100_rx *)packet->skb->data; |
| 2280 |
packet->dma_addr = dma_map_single(&priv->pci_dev->dev, |
| 2281 |
packet->skb->data, |
| 2282 |
sizeof(struct ipw2100_rx), |
| 2283 |
DMA_FROM_DEVICE); |
| 2284 |
if (dma_mapping_error(&priv->pci_dev->dev, packet->dma_addr)) { |
| 2285 |
dev_kfree_skb(packet->skb); |
| 2286 |
return -ENOMEM; |
| 2287 |
} |
| 2288 |
|
| 2289 |
return 0; |
| 2290 |
} |
| 2291 |
|
| 2292 |
#define SEARCH_ERROR 0xffffffff |
| 2293 |
#define SEARCH_FAIL 0xfffffffe |
| 2294 |
#define SEARCH_SUCCESS 0xfffffff0 |
| 2295 |
#define SEARCH_DISCARD 0 |
| 2296 |
#define SEARCH_SNAPSHOT 1 |
| 2297 |
|
| 2298 |
#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff)) |
| 2299 |
static void ipw2100_snapshot_free(struct ipw2100_priv *priv) |
| 2300 |
{ |
| 2301 |
int i; |
| 2302 |
if (!priv->snapshot[0]) |
| 2303 |
return; |
| 2304 |
for (i = 0; i < 0x30; i++) |
| 2305 |
kfree(priv->snapshot[i]); |
| 2306 |
priv->snapshot[0] = NULL; |
| 2307 |
} |
| 2308 |
|
| 2309 |
#ifdef IPW2100_DEBUG_C3 |
| 2310 |
static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv) |
| 2311 |
{ |
| 2312 |
int i; |
| 2313 |
if (priv->snapshot[0]) |
| 2314 |
return 1; |
| 2315 |
for (i = 0; i < 0x30; i++) { |
| 2316 |
priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC); |
| 2317 |
if (!priv->snapshot[i]) { |
| 2318 |
IPW_DEBUG_INFO("%s: Error allocating snapshot " |
| 2319 |
"buffer %d\n", priv->net_dev->name, i); |
| 2320 |
while (i > 0) |
| 2321 |
kfree(priv->snapshot[--i]); |
| 2322 |
priv->snapshot[0] = NULL; |
| 2323 |
return 0; |
| 2324 |
} |
| 2325 |
} |
| 2326 |
|
| 2327 |
return 1; |
| 2328 |
} |
| 2329 |
|
| 2330 |
static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf, |
| 2331 |
size_t len, int mode) |
| 2332 |
{ |
| 2333 |
u32 i, j; |
| 2334 |
u32 tmp; |
| 2335 |
u8 *s, *d; |
| 2336 |
u32 ret; |
| 2337 |
|
| 2338 |
s = in_buf; |
| 2339 |
if (mode == SEARCH_SNAPSHOT) { |
| 2340 |
if (!ipw2100_snapshot_alloc(priv)) |
| 2341 |
mode = SEARCH_DISCARD; |
| 2342 |
} |
| 2343 |
|
| 2344 |
for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) { |
| 2345 |
read_nic_dword(priv->net_dev, i, &tmp); |
| 2346 |
if (mode == SEARCH_SNAPSHOT) |
| 2347 |
*(u32 *) SNAPSHOT_ADDR(i) = tmp; |
| 2348 |
if (ret == SEARCH_FAIL) { |
| 2349 |
d = (u8 *) & tmp; |
| 2350 |
for (j = 0; j < 4; j++) { |
| 2351 |
if (*s != *d) { |
| 2352 |
s = in_buf; |
| 2353 |
continue; |
| 2354 |
} |
| 2355 |
|
| 2356 |
s++; |
| 2357 |
d++; |
| 2358 |
|
| 2359 |
if ((s - in_buf) == len) |
| 2360 |
ret = (i + j) - len + 1; |
| 2361 |
} |
| 2362 |
} else if (mode == SEARCH_DISCARD) |
| 2363 |
return ret; |
| 2364 |
} |
| 2365 |
|
| 2366 |
return ret; |
| 2367 |
} |
| 2368 |
#endif |
| 2369 |
|
| 2370 |
/* |
| 2371 |
* |
| 2372 |
* 0) Disconnect the SKB from the firmware (just unmap) |
| 2373 |
* 1) Pack the ETH header into the SKB |
| 2374 |
* 2) Pass the SKB to the network stack |
| 2375 |
* |
| 2376 |
* When packet is provided by the firmware, it contains the following: |
| 2377 |
* |
| 2378 |
* . libipw_hdr |
| 2379 |
* . libipw_snap_hdr |
| 2380 |
* |
| 2381 |
* The size of the constructed ethernet |
| 2382 |
* |
| 2383 |
*/ |
| 2384 |
#ifdef IPW2100_RX_DEBUG |
| 2385 |
static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH]; |
| 2386 |
#endif |
| 2387 |
|
| 2388 |
static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i) |
| 2389 |
{ |
| 2390 |
#ifdef IPW2100_DEBUG_C3 |
| 2391 |
struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| 2392 |
u32 match, reg; |
| 2393 |
int j; |
| 2394 |
#endif |
| 2395 |
|
| 2396 |
IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n", |
| 2397 |
i * sizeof(struct ipw2100_status)); |
| 2398 |
|
| 2399 |
#ifdef IPW2100_DEBUG_C3 |
| 2400 |
/* Halt the firmware so we can get a good image */ |
| 2401 |
write_register(priv->net_dev, IPW_REG_RESET_REG, |
| 2402 |
IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
| 2403 |
j = 5; |
| 2404 |
do { |
| 2405 |
udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); |
| 2406 |
read_register(priv->net_dev, IPW_REG_RESET_REG, ®); |
| 2407 |
|
| 2408 |
if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
| 2409 |
break; |
| 2410 |
} while (j--); |
| 2411 |
|
| 2412 |
match = ipw2100_match_buf(priv, (u8 *) status, |
| 2413 |
sizeof(struct ipw2100_status), |
| 2414 |
SEARCH_SNAPSHOT); |
| 2415 |
if (match < SEARCH_SUCCESS) |
| 2416 |
IPW_DEBUG_INFO("%s: DMA status match in Firmware at " |
| 2417 |
"offset 0x%06X, length %d:\n", |
| 2418 |
priv->net_dev->name, match, |
| 2419 |
sizeof(struct ipw2100_status)); |
| 2420 |
else |
| 2421 |
IPW_DEBUG_INFO("%s: No DMA status match in " |
| 2422 |
"Firmware.\n", priv->net_dev->name); |
| 2423 |
|
| 2424 |
printk_buf((u8 *) priv->status_queue.drv, |
| 2425 |
sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH); |
| 2426 |
#endif |
| 2427 |
|
| 2428 |
priv->fatal_error = IPW2100_ERR_C3_CORRUPTION; |
| 2429 |
priv->net_dev->stats.rx_errors++; |
| 2430 |
schedule_reset(priv); |
| 2431 |
} |
| 2432 |
|
| 2433 |
static void isr_rx(struct ipw2100_priv *priv, int i, |
| 2434 |
struct libipw_rx_stats *stats) |
| 2435 |
{ |
| 2436 |
struct net_device *dev = priv->net_dev; |
| 2437 |
struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| 2438 |
struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
| 2439 |
|
| 2440 |
IPW_DEBUG_RX("Handler...\n"); |
| 2441 |
|
| 2442 |
if (unlikely(status->frame_size > skb_tailroom(packet->skb))) { |
| 2443 |
IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" |
| 2444 |
" Dropping.\n", |
| 2445 |
dev->name, |
| 2446 |
status->frame_size, skb_tailroom(packet->skb)); |
| 2447 |
dev->stats.rx_errors++; |
| 2448 |
return; |
| 2449 |
} |
| 2450 |
|
| 2451 |
if (unlikely(!netif_running(dev))) { |
| 2452 |
dev->stats.rx_errors++; |
| 2453 |
priv->wstats.discard.misc++; |
| 2454 |
IPW_DEBUG_DROP("Dropping packet while interface is not up.\n"); |
| 2455 |
return; |
| 2456 |
} |
| 2457 |
|
| 2458 |
if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR && |
| 2459 |
!(priv->status & STATUS_ASSOCIATED))) { |
| 2460 |
IPW_DEBUG_DROP("Dropping packet while not associated.\n"); |
| 2461 |
priv->wstats.discard.misc++; |
| 2462 |
return; |
| 2463 |
} |
| 2464 |
|
| 2465 |
dma_unmap_single(&priv->pci_dev->dev, packet->dma_addr, |
| 2466 |
sizeof(struct ipw2100_rx), DMA_FROM_DEVICE); |
| 2467 |
|
| 2468 |
skb_put(packet->skb, status->frame_size); |
| 2469 |
|
| 2470 |
#ifdef IPW2100_RX_DEBUG |
| 2471 |
/* Make a copy of the frame so we can dump it to the logs if |
| 2472 |
* libipw_rx fails */ |
| 2473 |
skb_copy_from_linear_data(packet->skb, packet_data, |
| 2474 |
min_t(u32, status->frame_size, |
| 2475 |
IPW_RX_NIC_BUFFER_LENGTH)); |
| 2476 |
#endif |
| 2477 |
|
| 2478 |
if (!libipw_rx(priv->ieee, packet->skb, stats)) { |
| 2479 |
#ifdef IPW2100_RX_DEBUG |
| 2480 |
IPW_DEBUG_DROP("%s: Non consumed packet:\n", |
| 2481 |
dev->name); |
| 2482 |
printk_buf(IPW_DL_DROP, packet_data, status->frame_size); |
| 2483 |
#endif |
| 2484 |
dev->stats.rx_errors++; |
| 2485 |
|
| 2486 |
/* libipw_rx failed, so it didn't free the SKB */ |
| 2487 |
dev_kfree_skb_any(packet->skb); |
| 2488 |
packet->skb = NULL; |
| 2489 |
} |
| 2490 |
|
| 2491 |
/* We need to allocate a new SKB and attach it to the RDB. */ |
| 2492 |
if (unlikely(ipw2100_alloc_skb(priv, packet))) { |
| 2493 |
printk(KERN_WARNING DRV_NAME ": " |
| 2494 |
"%s: Unable to allocate SKB onto RBD ring - disabling " |
| 2495 |
"adapter.\n", dev->name); |
| 2496 |
/* TODO: schedule adapter shutdown */ |
| 2497 |
IPW_DEBUG_INFO("TODO: Shutdown adapter...\n"); |
| 2498 |
} |
| 2499 |
|
| 2500 |
/* Update the RDB entry */ |
| 2501 |
priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
| 2502 |
} |
| 2503 |
|
| 2504 |
#ifdef CONFIG_IPW2100_MONITOR |
| 2505 |
|
| 2506 |
static void isr_rx_monitor(struct ipw2100_priv *priv, int i, |
| 2507 |
struct libipw_rx_stats *stats) |
| 2508 |
{ |
| 2509 |
struct net_device *dev = priv->net_dev; |
| 2510 |
struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| 2511 |
struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
| 2512 |
|
| 2513 |
/* Magic struct that slots into the radiotap header -- no reason |
| 2514 |
* to build this manually element by element, we can write it much |
| 2515 |
* more efficiently than we can parse it. ORDER MATTERS HERE */ |
| 2516 |
struct ipw_rt_hdr { |
| 2517 |
struct ieee80211_radiotap_header_fixed rt_hdr; |
| 2518 |
s8 rt_dbmsignal; /* signal in dbM, kluged to signed */ |
| 2519 |
} *ipw_rt; |
| 2520 |
|
| 2521 |
IPW_DEBUG_RX("Handler...\n"); |
| 2522 |
|
| 2523 |
if (unlikely(status->frame_size > skb_tailroom(packet->skb) - |
| 2524 |
sizeof(struct ipw_rt_hdr))) { |
| 2525 |
IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" |
| 2526 |
" Dropping.\n", |
| 2527 |
dev->name, |
| 2528 |
status->frame_size, |
| 2529 |
skb_tailroom(packet->skb)); |
| 2530 |
dev->stats.rx_errors++; |
| 2531 |
return; |
| 2532 |
} |
| 2533 |
|
| 2534 |
if (unlikely(!netif_running(dev))) { |
| 2535 |
dev->stats.rx_errors++; |
| 2536 |
priv->wstats.discard.misc++; |
| 2537 |
IPW_DEBUG_DROP("Dropping packet while interface is not up.\n"); |
| 2538 |
return; |
| 2539 |
} |
| 2540 |
|
| 2541 |
if (unlikely(priv->config & CFG_CRC_CHECK && |
| 2542 |
status->flags & IPW_STATUS_FLAG_CRC_ERROR)) { |
| 2543 |
IPW_DEBUG_RX("CRC error in packet. Dropping.\n"); |
| 2544 |
dev->stats.rx_errors++; |
| 2545 |
return; |
| 2546 |
} |
| 2547 |
|
| 2548 |
dma_unmap_single(&priv->pci_dev->dev, packet->dma_addr, |
| 2549 |
sizeof(struct ipw2100_rx), DMA_FROM_DEVICE); |
| 2550 |
memmove(packet->skb->data + sizeof(struct ipw_rt_hdr), |
| 2551 |
packet->skb->data, status->frame_size); |
| 2552 |
|
| 2553 |
ipw_rt = (struct ipw_rt_hdr *) packet->skb->data; |
| 2554 |
|
| 2555 |
ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; |
| 2556 |
ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */ |
| 2557 |
ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */ |
| 2558 |
|
| 2559 |
ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL); |
| 2560 |
|
| 2561 |
ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM; |
| 2562 |
|
| 2563 |
skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr)); |
| 2564 |
|
| 2565 |
if (!libipw_rx(priv->ieee, packet->skb, stats)) { |
| 2566 |
dev->stats.rx_errors++; |
| 2567 |
|
| 2568 |
/* libipw_rx failed, so it didn't free the SKB */ |
| 2569 |
dev_kfree_skb_any(packet->skb); |
| 2570 |
packet->skb = NULL; |
| 2571 |
} |
| 2572 |
|
| 2573 |
/* We need to allocate a new SKB and attach it to the RDB. */ |
| 2574 |
if (unlikely(ipw2100_alloc_skb(priv, packet))) { |
| 2575 |
IPW_DEBUG_WARNING( |
| 2576 |
"%s: Unable to allocate SKB onto RBD ring - disabling " |
| 2577 |
"adapter.\n", dev->name); |
| 2578 |
/* TODO: schedule adapter shutdown */ |
| 2579 |
IPW_DEBUG_INFO("TODO: Shutdown adapter...\n"); |
| 2580 |
} |
| 2581 |
|
| 2582 |
/* Update the RDB entry */ |
| 2583 |
priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
| 2584 |
} |
| 2585 |
|
| 2586 |
#endif |
| 2587 |
|
| 2588 |
static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i) |
| 2589 |
{ |
| 2590 |
struct ipw2100_status *status = &priv->status_queue.drv[i]; |
| 2591 |
struct ipw2100_rx *u = priv->rx_buffers[i].rxp; |
| 2592 |
u16 frame_type = status->status_fields & STATUS_TYPE_MASK; |
| 2593 |
|
| 2594 |
switch (frame_type) { |
| 2595 |
case COMMAND_STATUS_VAL: |
| 2596 |
return (status->frame_size != sizeof(u->rx_data.command)); |
| 2597 |
case STATUS_CHANGE_VAL: |
| 2598 |
return (status->frame_size != sizeof(u->rx_data.status)); |
| 2599 |
case HOST_NOTIFICATION_VAL: |
| 2600 |
return (status->frame_size < sizeof(u->rx_data.notification)); |
| 2601 |
case P80211_DATA_VAL: |
| 2602 |
case P8023_DATA_VAL: |
| 2603 |
#ifdef CONFIG_IPW2100_MONITOR |
| 2604 |
return 0; |
| 2605 |
#else |
| 2606 |
switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) { |
| 2607 |
case IEEE80211_FTYPE_MGMT: |
| 2608 |
case IEEE80211_FTYPE_CTL: |
| 2609 |
return 0; |
| 2610 |
case IEEE80211_FTYPE_DATA: |
| 2611 |
return (status->frame_size > |
| 2612 |
IPW_MAX_802_11_PAYLOAD_LENGTH); |
| 2613 |
} |
| 2614 |
#endif |
| 2615 |
} |
| 2616 |
|
| 2617 |
return 1; |
| 2618 |
} |
| 2619 |
|
| 2620 |
/* |
| 2621 |
* ipw2100 interrupts are disabled at this point, and the ISR |
| 2622 |
* is the only code that calls this method. So, we do not need |
| 2623 |
* to play with any locks. |
| 2624 |
* |
| 2625 |
* RX Queue works as follows: |
| 2626 |
* |
| 2627 |
* Read index - firmware places packet in entry identified by the |
| 2628 |
* Read index and advances Read index. In this manner, |
| 2629 |
* Read index will always point to the next packet to |
| 2630 |
* be filled--but not yet valid. |
| 2631 |
* |
| 2632 |
* Write index - driver fills this entry with an unused RBD entry. |
| 2633 |
* This entry has not filled by the firmware yet. |
| 2634 |
* |
| 2635 |
* In between the W and R indexes are the RBDs that have been received |
| 2636 |
* but not yet processed. |
| 2637 |
* |
| 2638 |
* The process of handling packets will start at WRITE + 1 and advance |
| 2639 |
* until it reaches the READ index. |
| 2640 |
* |
| 2641 |
* The WRITE index is cached in the variable 'priv->rx_queue.next'. |
| 2642 |
* |
| 2643 |
*/ |
| 2644 |
static void __ipw2100_rx_process(struct ipw2100_priv *priv) |
| 2645 |
{ |
| 2646 |
struct ipw2100_bd_queue *rxq = &priv->rx_queue; |
| 2647 |
struct ipw2100_status_queue *sq = &priv->status_queue; |
| 2648 |
struct ipw2100_rx_packet *packet; |
| 2649 |
u16 frame_type; |
| 2650 |
u32 r, w, i, s; |
| 2651 |
struct ipw2100_rx *u; |
| 2652 |
struct libipw_rx_stats stats = { |
| 2653 |
.mac_time = jiffies, |
| 2654 |
}; |
| 2655 |
|
| 2656 |
read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r); |
| 2657 |
read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w); |
| 2658 |
|
| 2659 |
if (r >= rxq->entries) { |
| 2660 |
IPW_DEBUG_RX("exit - bad read index\n"); |
| 2661 |
return; |
| 2662 |
} |
| 2663 |
|
| 2664 |
i = (rxq->next + 1) % rxq->entries; |
| 2665 |
s = i; |
| 2666 |
while (i != r) { |
| 2667 |
/* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n", |
| 2668 |
r, rxq->next, i); */ |
| 2669 |
|
| 2670 |
packet = &priv->rx_buffers[i]; |
| 2671 |
|
| 2672 |
/* Sync the DMA for the RX buffer so CPU is sure to get |
| 2673 |
* the correct values */ |
| 2674 |
dma_sync_single_for_cpu(&priv->pci_dev->dev, packet->dma_addr, |
| 2675 |
sizeof(struct ipw2100_rx), |
| 2676 |
DMA_FROM_DEVICE); |
| 2677 |
|
| 2678 |
if (unlikely(ipw2100_corruption_check(priv, i))) { |
| 2679 |
ipw2100_corruption_detected(priv, i); |
| 2680 |
goto increment; |
| 2681 |
} |
| 2682 |
|
| 2683 |
u = packet->rxp; |
| 2684 |
frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK; |
| 2685 |
stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM; |
| 2686 |
stats.len = sq->drv[i].frame_size; |
| 2687 |
|
| 2688 |
stats.mask = 0; |
| 2689 |
if (stats.rssi != 0) |
| 2690 |
stats.mask |= LIBIPW_STATMASK_RSSI; |
| 2691 |
stats.freq = LIBIPW_24GHZ_BAND; |
| 2692 |
|
| 2693 |
IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n", |
| 2694 |
priv->net_dev->name, frame_types[frame_type], |
| 2695 |
stats.len); |
| 2696 |
|
| 2697 |
switch (frame_type) { |
| 2698 |
case COMMAND_STATUS_VAL: |
| 2699 |
/* Reset Rx watchdog */ |
| 2700 |
isr_rx_complete_command(priv, &u->rx_data.command); |
| 2701 |
break; |
| 2702 |
|
| 2703 |
case STATUS_CHANGE_VAL: |
| 2704 |
isr_status_change(priv, u->rx_data.status); |
| 2705 |
break; |
| 2706 |
|
| 2707 |
case P80211_DATA_VAL: |
| 2708 |
case P8023_DATA_VAL: |
| 2709 |
#ifdef CONFIG_IPW2100_MONITOR |
| 2710 |
if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
| 2711 |
isr_rx_monitor(priv, i, &stats); |
| 2712 |
break; |
| 2713 |
} |
| 2714 |
#endif |
| 2715 |
if (stats.len < sizeof(struct libipw_hdr_3addr)) |
| 2716 |
break; |
| 2717 |
switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) { |
| 2718 |
case IEEE80211_FTYPE_MGMT: |
| 2719 |
libipw_rx_mgt(priv->ieee, |
| 2720 |
&u->rx_data.header, &stats); |
| 2721 |
break; |
| 2722 |
|
| 2723 |
case IEEE80211_FTYPE_CTL: |
| 2724 |
break; |
| 2725 |
|
| 2726 |
case IEEE80211_FTYPE_DATA: |
| 2727 |
isr_rx(priv, i, &stats); |
| 2728 |
break; |
| 2729 |
|
| 2730 |
} |
| 2731 |
break; |
| 2732 |
} |
| 2733 |
|
| 2734 |
increment: |
| 2735 |
/* clear status field associated with this RBD */ |
| 2736 |
rxq->drv[i].status.info.field = 0; |
| 2737 |
|
| 2738 |
i = (i + 1) % rxq->entries; |
| 2739 |
} |
| 2740 |
|
| 2741 |
if (i != s) { |
| 2742 |
/* backtrack one entry, wrapping to end if at 0 */ |
| 2743 |
rxq->next = (i ? i : rxq->entries) - 1; |
| 2744 |
|
| 2745 |
write_register(priv->net_dev, |
| 2746 |
IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next); |
| 2747 |
} |
| 2748 |
} |
| 2749 |
|
| 2750 |
/* |
| 2751 |
* __ipw2100_tx_process |
| 2752 |
* |
| 2753 |
* This routine will determine whether the next packet on |
| 2754 |
* the fw_pend_list has been processed by the firmware yet. |
| 2755 |
* |
| 2756 |
* If not, then it does nothing and returns. |
| 2757 |
* |
| 2758 |
* If so, then it removes the item from the fw_pend_list, frees |
| 2759 |
* any associated storage, and places the item back on the |
| 2760 |
* free list of its source (either msg_free_list or tx_free_list) |
| 2761 |
* |
| 2762 |
* TX Queue works as follows: |
| 2763 |
* |
| 2764 |
* Read index - points to the next TBD that the firmware will |
| 2765 |
* process. The firmware will read the data, and once |
| 2766 |
* done processing, it will advance the Read index. |
| 2767 |
* |
| 2768 |
* Write index - driver fills this entry with an constructed TBD |
| 2769 |
* entry. The Write index is not advanced until the |
| 2770 |
* packet has been configured. |
| 2771 |
* |
| 2772 |
* In between the W and R indexes are the TBDs that have NOT been |
| 2773 |
* processed. Lagging behind the R index are packets that have |
| 2774 |
* been processed but have not been freed by the driver. |
| 2775 |
* |
| 2776 |
* In order to free old storage, an internal index will be maintained |
| 2777 |
* that points to the next packet to be freed. When all used |
| 2778 |
* packets have been freed, the oldest index will be the same as the |
| 2779 |
* firmware's read index. |
| 2780 |
* |
| 2781 |
* The OLDEST index is cached in the variable 'priv->tx_queue.oldest' |
| 2782 |
* |
| 2783 |
* Because the TBD structure can not contain arbitrary data, the |
| 2784 |
* driver must keep an internal queue of cached allocations such that |
| 2785 |
* it can put that data back into the tx_free_list and msg_free_list |
| 2786 |
* for use by future command and data packets. |
| 2787 |
* |
| 2788 |
*/ |
| 2789 |
static int __ipw2100_tx_process(struct ipw2100_priv *priv) |
| 2790 |
{ |
| 2791 |
struct ipw2100_bd_queue *txq = &priv->tx_queue; |
| 2792 |
struct ipw2100_bd *tbd; |
| 2793 |
struct list_head *element; |
| 2794 |
struct ipw2100_tx_packet *packet; |
| 2795 |
int descriptors_used; |
| 2796 |
int e, i; |
| 2797 |
u32 r, w, frag_num = 0; |
| 2798 |
|
| 2799 |
if (list_empty(&priv->fw_pend_list)) |
| 2800 |
return 0; |
| 2801 |
|
| 2802 |
element = priv->fw_pend_list.next; |
| 2803 |
|
| 2804 |
packet = list_entry(element, struct ipw2100_tx_packet, list); |
| 2805 |
tbd = &txq->drv[packet->index]; |
| 2806 |
|
| 2807 |
/* Determine how many TBD entries must be finished... */ |
| 2808 |
switch (packet->type) { |
| 2809 |
case COMMAND: |
| 2810 |
/* COMMAND uses only one slot; don't advance */ |
| 2811 |
descriptors_used = 1; |
| 2812 |
e = txq->oldest; |
| 2813 |
break; |
| 2814 |
|
| 2815 |
case DATA: |
| 2816 |
/* DATA uses two slots; advance and loop position. */ |
| 2817 |
descriptors_used = tbd->num_fragments; |
| 2818 |
frag_num = tbd->num_fragments - 1; |
| 2819 |
e = txq->oldest + frag_num; |
| 2820 |
e %= txq->entries; |
| 2821 |
break; |
| 2822 |
|
| 2823 |
default: |
| 2824 |
printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n", |
| 2825 |
priv->net_dev->name); |
| 2826 |
return 0; |
| 2827 |
} |
| 2828 |
|
| 2829 |
/* if the last TBD is not done by NIC yet, then packet is |
| 2830 |
* not ready to be released. |
| 2831 |
* |
| 2832 |
*/ |
| 2833 |
read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, |
| 2834 |
&r); |
| 2835 |
read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
| 2836 |
&w); |
| 2837 |
if (w != txq->next) |
| 2838 |
printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n", |
| 2839 |
priv->net_dev->name); |
| 2840 |
|
| 2841 |
/* |
| 2842 |
* txq->next is the index of the last packet written txq->oldest is |
| 2843 |
* the index of the r is the index of the next packet to be read by |
| 2844 |
* firmware |
| 2845 |
*/ |
| 2846 |
|
| 2847 |
/* |
| 2848 |
* Quick graphic to help you visualize the following |
| 2849 |
* if / else statement |
| 2850 |
* |
| 2851 |
* ===>| s---->|=============== |
| 2852 |
* e>| |
| 2853 |
* | a | b | c | d | e | f | g | h | i | j | k | l |
| 2854 |
* r---->| |
| 2855 |
* w |
| 2856 |
* |
| 2857 |
* w - updated by driver |
| 2858 |
* r - updated by firmware |
| 2859 |
* s - start of oldest BD entry (txq->oldest) |
| 2860 |
* e - end of oldest BD entry |
| 2861 |
* |
| 2862 |
*/ |
| 2863 |
if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) { |
| 2864 |
IPW_DEBUG_TX("exit - no processed packets ready to release.\n"); |
| 2865 |
return 0; |
| 2866 |
} |
| 2867 |
|
| 2868 |
list_del(element); |
| 2869 |
DEC_STAT(&priv->fw_pend_stat); |
| 2870 |
|
| 2871 |
#ifdef CONFIG_IPW2100_DEBUG |
| 2872 |
{ |
| 2873 |
i = txq->oldest; |
| 2874 |
IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i, |
| 2875 |
&txq->drv[i], |
| 2876 |
(u32) (txq->nic + i * sizeof(struct ipw2100_bd)), |
| 2877 |
txq->drv[i].host_addr, txq->drv[i].buf_length); |
| 2878 |
|
| 2879 |
if (packet->type == DATA) { |
| 2880 |
i = (i + 1) % txq->entries; |
| 2881 |
|
| 2882 |
IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i, |
| 2883 |
&txq->drv[i], |
| 2884 |
(u32) (txq->nic + i * |
| 2885 |
sizeof(struct ipw2100_bd)), |
| 2886 |
(u32) txq->drv[i].host_addr, |
| 2887 |
txq->drv[i].buf_length); |
| 2888 |
} |
| 2889 |
} |
| 2890 |
#endif |
| 2891 |
|
| 2892 |
switch (packet->type) { |
| 2893 |
case DATA: |
| 2894 |
if (txq->drv[txq->oldest].status.info.fields.txType != 0) |
| 2895 |
printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " |
| 2896 |
"Expecting DATA TBD but pulled " |
| 2897 |
"something else: ids %d=%d.\n", |
| 2898 |
priv->net_dev->name, txq->oldest, packet->index); |
| 2899 |
|
| 2900 |
/* DATA packet; we have to unmap and free the SKB */ |
| 2901 |
for (i = 0; i < frag_num; i++) { |
| 2902 |
tbd = &txq->drv[(packet->index + 1 + i) % txq->entries]; |
| 2903 |
|
| 2904 |
IPW_DEBUG_TX("TX%d P=%08x L=%d\n", |
| 2905 |
(packet->index + 1 + i) % txq->entries, |
| 2906 |
tbd->host_addr, tbd->buf_length); |
| 2907 |
|
| 2908 |
dma_unmap_single(&priv->pci_dev->dev, tbd->host_addr, |
| 2909 |
tbd->buf_length, DMA_TO_DEVICE); |
| 2910 |
} |
| 2911 |
|
| 2912 |
libipw_txb_free(packet->info.d_struct.txb); |
| 2913 |
packet->info.d_struct.txb = NULL; |
| 2914 |
|
| 2915 |
list_add_tail(element, &priv->tx_free_list); |
| 2916 |
INC_STAT(&priv->tx_free_stat); |
| 2917 |
|
| 2918 |
/* We have a free slot in the Tx queue, so wake up the |
| 2919 |
* transmit layer if it is stopped. */ |
| 2920 |
if (priv->status & STATUS_ASSOCIATED) |
| 2921 |
netif_wake_queue(priv->net_dev); |
| 2922 |
|
| 2923 |
/* A packet was processed by the hardware, so update the |
| 2924 |
* watchdog */ |
| 2925 |
netif_trans_update(priv->net_dev); |
| 2926 |
|
| 2927 |
break; |
| 2928 |
|
| 2929 |
case COMMAND: |
| 2930 |
if (txq->drv[txq->oldest].status.info.fields.txType != 1) |
| 2931 |
printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " |
| 2932 |
"Expecting COMMAND TBD but pulled " |
| 2933 |
"something else: ids %d=%d.\n", |
| 2934 |
priv->net_dev->name, txq->oldest, packet->index); |
| 2935 |
|
| 2936 |
#ifdef CONFIG_IPW2100_DEBUG |
| 2937 |
if (packet->info.c_struct.cmd->host_command_reg < |
| 2938 |
ARRAY_SIZE(command_types)) |
| 2939 |
IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n", |
| 2940 |
command_types[packet->info.c_struct.cmd-> |
| 2941 |
host_command_reg], |
| 2942 |
packet->info.c_struct.cmd-> |
| 2943 |
host_command_reg, |
| 2944 |
packet->info.c_struct.cmd->cmd_status_reg); |
| 2945 |
#endif |
| 2946 |
|
| 2947 |
list_add_tail(element, &priv->msg_free_list); |
| 2948 |
INC_STAT(&priv->msg_free_stat); |
| 2949 |
break; |
| 2950 |
} |
| 2951 |
|
| 2952 |
/* advance oldest used TBD pointer to start of next entry */ |
| 2953 |
txq->oldest = (e + 1) % txq->entries; |
| 2954 |
/* increase available TBDs number */ |
| 2955 |
txq->available += descriptors_used; |
| 2956 |
SET_STAT(&priv->txq_stat, txq->available); |
| 2957 |
|
| 2958 |
IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n", |
| 2959 |
jiffies - packet->jiffy_start); |
| 2960 |
|
| 2961 |
return (!list_empty(&priv->fw_pend_list)); |
| 2962 |
} |
| 2963 |
|
| 2964 |
static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv) |
| 2965 |
{ |
| 2966 |
int i = 0; |
| 2967 |
|
| 2968 |
while (__ipw2100_tx_process(priv) && i < 200) |
| 2969 |
i++; |
| 2970 |
|
| 2971 |
if (i == 200) { |
| 2972 |
printk(KERN_WARNING DRV_NAME ": " |
| 2973 |
"%s: Driver is running slow (%d iters).\n", |
| 2974 |
priv->net_dev->name, i); |
| 2975 |
} |
| 2976 |
} |
| 2977 |
|
| 2978 |
static void ipw2100_tx_send_commands(struct ipw2100_priv *priv) |
| 2979 |
{ |
| 2980 |
struct list_head *element; |
| 2981 |
struct ipw2100_tx_packet *packet; |
| 2982 |
struct ipw2100_bd_queue *txq = &priv->tx_queue; |
| 2983 |
struct ipw2100_bd *tbd; |
| 2984 |
int next = txq->next; |
| 2985 |
|
| 2986 |
while (!list_empty(&priv->msg_pend_list)) { |
| 2987 |
/* if there isn't enough space in TBD queue, then |
| 2988 |
* don't stuff a new one in. |
| 2989 |
* NOTE: 3 are needed as a command will take one, |
| 2990 |
* and there is a minimum of 2 that must be |
| 2991 |
* maintained between the r and w indexes |
| 2992 |
*/ |
| 2993 |
if (txq->available <= 3) { |
| 2994 |
IPW_DEBUG_TX("no room in tx_queue\n"); |
| 2995 |
break; |
| 2996 |
} |
| 2997 |
|
| 2998 |
element = priv->msg_pend_list.next; |
| 2999 |
list_del(element); |
| 3000 |
DEC_STAT(&priv->msg_pend_stat); |
| 3001 |
|
| 3002 |
packet = list_entry(element, struct ipw2100_tx_packet, list); |
| 3003 |
|
| 3004 |
IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n", |
| 3005 |
&txq->drv[txq->next], |
| 3006 |
(u32) (txq->nic + txq->next * |
| 3007 |
sizeof(struct ipw2100_bd))); |
| 3008 |
|
| 3009 |
packet->index = txq->next; |
| 3010 |
|
| 3011 |
tbd = &txq->drv[txq->next]; |
| 3012 |
|
| 3013 |
/* initialize TBD */ |
| 3014 |
tbd->host_addr = packet->info.c_struct.cmd_phys; |
| 3015 |
tbd->buf_length = sizeof(struct ipw2100_cmd_header); |
| 3016 |
/* not marking number of fragments causes problems |
| 3017 |
* with f/w debug version */ |
| 3018 |
tbd->num_fragments = 1; |
| 3019 |
tbd->status.info.field = |
| 3020 |
IPW_BD_STATUS_TX_FRAME_COMMAND | |
| 3021 |
IPW_BD_STATUS_TX_INTERRUPT_ENABLE; |
| 3022 |
|
| 3023 |
/* update TBD queue counters */ |
| 3024 |
txq->next++; |
| 3025 |
txq->next %= txq->entries; |
| 3026 |
txq->available--; |
| 3027 |
DEC_STAT(&priv->txq_stat); |
| 3028 |
|
| 3029 |
list_add_tail(element, &priv->fw_pend_list); |
| 3030 |
INC_STAT(&priv->fw_pend_stat); |
| 3031 |
} |
| 3032 |
|
| 3033 |
if (txq->next != next) { |
| 3034 |
/* kick off the DMA by notifying firmware the |
| 3035 |
* write index has moved; make sure TBD stores are sync'd */ |
| 3036 |
wmb(); |
| 3037 |
write_register(priv->net_dev, |
| 3038 |
IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
| 3039 |
txq->next); |
| 3040 |
} |
| 3041 |
} |
| 3042 |
|
| 3043 |
/* |
| 3044 |
* ipw2100_tx_send_data |
| 3045 |
* |
| 3046 |
*/ |
| 3047 |
static void ipw2100_tx_send_data(struct ipw2100_priv *priv) |
| 3048 |
{ |
| 3049 |
struct list_head *element; |
| 3050 |
struct ipw2100_tx_packet *packet; |
| 3051 |
struct ipw2100_bd_queue *txq = &priv->tx_queue; |
| 3052 |
struct ipw2100_bd *tbd; |
| 3053 |
int next = txq->next; |
| 3054 |
int i = 0; |
| 3055 |
struct ipw2100_data_header *ipw_hdr; |
| 3056 |
struct libipw_hdr_3addr *hdr; |
| 3057 |
|
| 3058 |
while (!list_empty(&priv->tx_pend_list)) { |
| 3059 |
/* if there isn't enough space in TBD queue, then |
| 3060 |
* don't stuff a new one in. |
| 3061 |
* NOTE: 4 are needed as a data will take two, |
| 3062 |
* and there is a minimum of 2 that must be |
| 3063 |
* maintained between the r and w indexes |
| 3064 |
*/ |
| 3065 |
element = priv->tx_pend_list.next; |
| 3066 |
packet = list_entry(element, struct ipw2100_tx_packet, list); |
| 3067 |
|
| 3068 |
if (unlikely(1 + packet->info.d_struct.txb->nr_frags > |
| 3069 |
IPW_MAX_BDS)) { |
| 3070 |
/* TODO: Support merging buffers if more than |
| 3071 |
* IPW_MAX_BDS are used */ |
| 3072 |
IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. " |
| 3073 |
"Increase fragmentation level.\n", |
| 3074 |
priv->net_dev->name); |
| 3075 |
} |
| 3076 |
|
| 3077 |
if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) { |
| 3078 |
IPW_DEBUG_TX("no room in tx_queue\n"); |
| 3079 |
break; |
| 3080 |
} |
| 3081 |
|
| 3082 |
list_del(element); |
| 3083 |
DEC_STAT(&priv->tx_pend_stat); |
| 3084 |
|
| 3085 |
tbd = &txq->drv[txq->next]; |
| 3086 |
|
| 3087 |
packet->index = txq->next; |
| 3088 |
|
| 3089 |
ipw_hdr = packet->info.d_struct.data; |
| 3090 |
hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb-> |
| 3091 |
fragments[0]->data; |
| 3092 |
|
| 3093 |
if (priv->ieee->iw_mode == IW_MODE_INFRA) { |
| 3094 |
/* To DS: Addr1 = BSSID, Addr2 = SA, |
| 3095 |
Addr3 = DA */ |
| 3096 |
memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); |
| 3097 |
memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN); |
| 3098 |
} else if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| 3099 |
/* not From/To DS: Addr1 = DA, Addr2 = SA, |
| 3100 |
Addr3 = BSSID */ |
| 3101 |
memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); |
| 3102 |
memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN); |
| 3103 |
} |
| 3104 |
|
| 3105 |
ipw_hdr->host_command_reg = SEND; |
| 3106 |
ipw_hdr->host_command_reg1 = 0; |
| 3107 |
|
| 3108 |
/* For now we only support host based encryption */ |
| 3109 |
ipw_hdr->needs_encryption = 0; |
| 3110 |
ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted; |
| 3111 |
if (packet->info.d_struct.txb->nr_frags > 1) |
| 3112 |
ipw_hdr->fragment_size = |
| 3113 |
packet->info.d_struct.txb->frag_size - |
| 3114 |
LIBIPW_3ADDR_LEN; |
| 3115 |
else |
| 3116 |
ipw_hdr->fragment_size = 0; |
| 3117 |
|
| 3118 |
tbd->host_addr = packet->info.d_struct.data_phys; |
| 3119 |
tbd->buf_length = sizeof(struct ipw2100_data_header); |
| 3120 |
tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags; |
| 3121 |
tbd->status.info.field = |
| 3122 |
IPW_BD_STATUS_TX_FRAME_802_3 | |
| 3123 |
IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; |
| 3124 |
txq->next++; |
| 3125 |
txq->next %= txq->entries; |
| 3126 |
|
| 3127 |
IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n", |
| 3128 |
packet->index, tbd->host_addr, tbd->buf_length); |
| 3129 |
#ifdef CONFIG_IPW2100_DEBUG |
| 3130 |
if (packet->info.d_struct.txb->nr_frags > 1) |
| 3131 |
IPW_DEBUG_FRAG("fragment Tx: %d frames\n", |
| 3132 |
packet->info.d_struct.txb->nr_frags); |
| 3133 |
#endif |
| 3134 |
|
| 3135 |
for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) { |
| 3136 |
tbd = &txq->drv[txq->next]; |
| 3137 |
if (i == packet->info.d_struct.txb->nr_frags - 1) |
| 3138 |
tbd->status.info.field = |
| 3139 |
IPW_BD_STATUS_TX_FRAME_802_3 | |
| 3140 |
IPW_BD_STATUS_TX_INTERRUPT_ENABLE; |
| 3141 |
else |
| 3142 |
tbd->status.info.field = |
| 3143 |
IPW_BD_STATUS_TX_FRAME_802_3 | |
| 3144 |
IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; |
| 3145 |
|
| 3146 |
tbd->buf_length = packet->info.d_struct.txb-> |
| 3147 |
fragments[i]->len - LIBIPW_3ADDR_LEN; |
| 3148 |
|
| 3149 |
tbd->host_addr = dma_map_single(&priv->pci_dev->dev, |
| 3150 |
packet->info.d_struct. |
| 3151 |
txb->fragments[i]->data + |
| 3152 |
LIBIPW_3ADDR_LEN, |
| 3153 |
tbd->buf_length, |
| 3154 |
DMA_TO_DEVICE); |
| 3155 |
if (dma_mapping_error(&priv->pci_dev->dev, tbd->host_addr)) { |
| 3156 |
IPW_DEBUG_TX("dma mapping error\n"); |
| 3157 |
break; |
| 3158 |
} |
| 3159 |
|
| 3160 |
IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n", |
| 3161 |
txq->next, tbd->host_addr, |
| 3162 |
tbd->buf_length); |
| 3163 |
|
| 3164 |
dma_sync_single_for_device(&priv->pci_dev->dev, |
| 3165 |
tbd->host_addr, |
| 3166 |
tbd->buf_length, |
| 3167 |
DMA_TO_DEVICE); |
| 3168 |
|
| 3169 |
txq->next++; |
| 3170 |
txq->next %= txq->entries; |
| 3171 |
} |
| 3172 |
|
| 3173 |
txq->available -= 1 + packet->info.d_struct.txb->nr_frags; |
| 3174 |
SET_STAT(&priv->txq_stat, txq->available); |
| 3175 |
|
| 3176 |
list_add_tail(element, &priv->fw_pend_list); |
| 3177 |
INC_STAT(&priv->fw_pend_stat); |
| 3178 |
} |
| 3179 |
|
| 3180 |
if (txq->next != next) { |
| 3181 |
/* kick off the DMA by notifying firmware the |
| 3182 |
* write index has moved; make sure TBD stores are sync'd */ |
| 3183 |
write_register(priv->net_dev, |
| 3184 |
IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
| 3185 |
txq->next); |
| 3186 |
} |
| 3187 |
} |
| 3188 |
|
| 3189 |
static void ipw2100_irq_tasklet(struct tasklet_struct *t) |
| 3190 |
{ |
| 3191 |
struct ipw2100_priv *priv = from_tasklet(priv, t, irq_tasklet); |
| 3192 |
struct net_device *dev = priv->net_dev; |
| 3193 |
unsigned long flags; |
| 3194 |
u32 inta, tmp; |
| 3195 |
|
| 3196 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 3197 |
ipw2100_disable_interrupts(priv); |
| 3198 |
|
| 3199 |
read_register(dev, IPW_REG_INTA, &inta); |
| 3200 |
|
| 3201 |
IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n", |
| 3202 |
(unsigned long)inta & IPW_INTERRUPT_MASK); |
| 3203 |
|
| 3204 |
priv->in_isr++; |
| 3205 |
priv->interrupts++; |
| 3206 |
|
| 3207 |
/* We do not loop and keep polling for more interrupts as this |
| 3208 |
* is frowned upon and doesn't play nicely with other potentially |
| 3209 |
* chained IRQs */ |
| 3210 |
IPW_DEBUG_ISR("INTA: 0x%08lX\n", |
| 3211 |
(unsigned long)inta & IPW_INTERRUPT_MASK); |
| 3212 |
|
| 3213 |
if (inta & IPW2100_INTA_FATAL_ERROR) { |
| 3214 |
printk(KERN_WARNING DRV_NAME |
| 3215 |
": Fatal interrupt. Scheduling firmware restart.\n"); |
| 3216 |
priv->inta_other++; |
| 3217 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR); |
| 3218 |
|
| 3219 |
read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error); |
| 3220 |
IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n", |
| 3221 |
priv->net_dev->name, priv->fatal_error); |
| 3222 |
|
| 3223 |
read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp); |
| 3224 |
IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n", |
| 3225 |
priv->net_dev->name, tmp); |
| 3226 |
|
| 3227 |
/* Wake up any sleeping jobs */ |
| 3228 |
schedule_reset(priv); |
| 3229 |
} |
| 3230 |
|
| 3231 |
if (inta & IPW2100_INTA_PARITY_ERROR) { |
| 3232 |
printk(KERN_ERR DRV_NAME |
| 3233 |
": ***** PARITY ERROR INTERRUPT !!!!\n"); |
| 3234 |
priv->inta_other++; |
| 3235 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR); |
| 3236 |
} |
| 3237 |
|
| 3238 |
if (inta & IPW2100_INTA_RX_TRANSFER) { |
| 3239 |
IPW_DEBUG_ISR("RX interrupt\n"); |
| 3240 |
|
| 3241 |
priv->rx_interrupts++; |
| 3242 |
|
| 3243 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER); |
| 3244 |
|
| 3245 |
__ipw2100_rx_process(priv); |
| 3246 |
__ipw2100_tx_complete(priv); |
| 3247 |
} |
| 3248 |
|
| 3249 |
if (inta & IPW2100_INTA_TX_TRANSFER) { |
| 3250 |
IPW_DEBUG_ISR("TX interrupt\n"); |
| 3251 |
|
| 3252 |
priv->tx_interrupts++; |
| 3253 |
|
| 3254 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER); |
| 3255 |
|
| 3256 |
__ipw2100_tx_complete(priv); |
| 3257 |
ipw2100_tx_send_commands(priv); |
| 3258 |
ipw2100_tx_send_data(priv); |
| 3259 |
} |
| 3260 |
|
| 3261 |
if (inta & IPW2100_INTA_TX_COMPLETE) { |
| 3262 |
IPW_DEBUG_ISR("TX complete\n"); |
| 3263 |
priv->inta_other++; |
| 3264 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE); |
| 3265 |
|
| 3266 |
__ipw2100_tx_complete(priv); |
| 3267 |
} |
| 3268 |
|
| 3269 |
if (inta & IPW2100_INTA_EVENT_INTERRUPT) { |
| 3270 |
/* ipw2100_handle_event(dev); */ |
| 3271 |
priv->inta_other++; |
| 3272 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT); |
| 3273 |
} |
| 3274 |
|
| 3275 |
if (inta & IPW2100_INTA_FW_INIT_DONE) { |
| 3276 |
IPW_DEBUG_ISR("FW init done interrupt\n"); |
| 3277 |
priv->inta_other++; |
| 3278 |
|
| 3279 |
read_register(dev, IPW_REG_INTA, &tmp); |
| 3280 |
if (tmp & (IPW2100_INTA_FATAL_ERROR | |
| 3281 |
IPW2100_INTA_PARITY_ERROR)) { |
| 3282 |
write_register(dev, IPW_REG_INTA, |
| 3283 |
IPW2100_INTA_FATAL_ERROR | |
| 3284 |
IPW2100_INTA_PARITY_ERROR); |
| 3285 |
} |
| 3286 |
|
| 3287 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE); |
| 3288 |
} |
| 3289 |
|
| 3290 |
if (inta & IPW2100_INTA_STATUS_CHANGE) { |
| 3291 |
IPW_DEBUG_ISR("Status change interrupt\n"); |
| 3292 |
priv->inta_other++; |
| 3293 |
write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE); |
| 3294 |
} |
| 3295 |
|
| 3296 |
if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) { |
| 3297 |
IPW_DEBUG_ISR("slave host mode interrupt\n"); |
| 3298 |
priv->inta_other++; |
| 3299 |
write_register(dev, IPW_REG_INTA, |
| 3300 |
IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE); |
| 3301 |
} |
| 3302 |
|
| 3303 |
priv->in_isr--; |
| 3304 |
ipw2100_enable_interrupts(priv); |
| 3305 |
|
| 3306 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 3307 |
|
| 3308 |
IPW_DEBUG_ISR("exit\n"); |
| 3309 |
} |
| 3310 |
|
| 3311 |
static irqreturn_t ipw2100_interrupt(int irq, void *data) |
| 3312 |
{ |
| 3313 |
struct ipw2100_priv *priv = data; |
| 3314 |
u32 inta, inta_mask; |
| 3315 |
|
| 3316 |
if (!data) |
| 3317 |
return IRQ_NONE; |
| 3318 |
|
| 3319 |
spin_lock(&priv->low_lock); |
| 3320 |
|
| 3321 |
/* We check to see if we should be ignoring interrupts before |
| 3322 |
* we touch the hardware. During ucode load if we try and handle |
| 3323 |
* an interrupt we can cause keyboard problems as well as cause |
| 3324 |
* the ucode to fail to initialize */ |
| 3325 |
if (!(priv->status & STATUS_INT_ENABLED)) { |
| 3326 |
/* Shared IRQ */ |
| 3327 |
goto none; |
| 3328 |
} |
| 3329 |
|
| 3330 |
read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask); |
| 3331 |
read_register(priv->net_dev, IPW_REG_INTA, &inta); |
| 3332 |
|
| 3333 |
if (inta == 0xFFFFFFFF) { |
| 3334 |
/* Hardware disappeared */ |
| 3335 |
printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n"); |
| 3336 |
goto none; |
| 3337 |
} |
| 3338 |
|
| 3339 |
inta &= IPW_INTERRUPT_MASK; |
| 3340 |
|
| 3341 |
if (!(inta & inta_mask)) { |
| 3342 |
/* Shared interrupt */ |
| 3343 |
goto none; |
| 3344 |
} |
| 3345 |
|
| 3346 |
/* We disable the hardware interrupt here just to prevent unneeded |
| 3347 |
* calls to be made. We disable this again within the actual |
| 3348 |
* work tasklet, so if another part of the code re-enables the |
| 3349 |
* interrupt, that is fine */ |
| 3350 |
ipw2100_disable_interrupts(priv); |
| 3351 |
|
| 3352 |
tasklet_schedule(&priv->irq_tasklet); |
| 3353 |
spin_unlock(&priv->low_lock); |
| 3354 |
|
| 3355 |
return IRQ_HANDLED; |
| 3356 |
none: |
| 3357 |
spin_unlock(&priv->low_lock); |
| 3358 |
return IRQ_NONE; |
| 3359 |
} |
| 3360 |
|
| 3361 |
static netdev_tx_t ipw2100_tx(struct libipw_txb *txb, |
| 3362 |
struct net_device *dev, int pri) |
| 3363 |
{ |
| 3364 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 3365 |
struct list_head *element; |
| 3366 |
struct ipw2100_tx_packet *packet; |
| 3367 |
unsigned long flags; |
| 3368 |
|
| 3369 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 3370 |
|
| 3371 |
if (!(priv->status & STATUS_ASSOCIATED)) { |
| 3372 |
IPW_DEBUG_INFO("Can not transmit when not connected.\n"); |
| 3373 |
priv->net_dev->stats.tx_carrier_errors++; |
| 3374 |
netif_stop_queue(dev); |
| 3375 |
goto fail_unlock; |
| 3376 |
} |
| 3377 |
|
| 3378 |
if (list_empty(&priv->tx_free_list)) |
| 3379 |
goto fail_unlock; |
| 3380 |
|
| 3381 |
element = priv->tx_free_list.next; |
| 3382 |
packet = list_entry(element, struct ipw2100_tx_packet, list); |
| 3383 |
|
| 3384 |
packet->info.d_struct.txb = txb; |
| 3385 |
|
| 3386 |
IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len); |
| 3387 |
printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len); |
| 3388 |
|
| 3389 |
packet->jiffy_start = jiffies; |
| 3390 |
|
| 3391 |
list_del(element); |
| 3392 |
DEC_STAT(&priv->tx_free_stat); |
| 3393 |
|
| 3394 |
list_add_tail(element, &priv->tx_pend_list); |
| 3395 |
INC_STAT(&priv->tx_pend_stat); |
| 3396 |
|
| 3397 |
ipw2100_tx_send_data(priv); |
| 3398 |
|
| 3399 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 3400 |
return NETDEV_TX_OK; |
| 3401 |
|
| 3402 |
fail_unlock: |
| 3403 |
netif_stop_queue(dev); |
| 3404 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 3405 |
return NETDEV_TX_BUSY; |
| 3406 |
} |
| 3407 |
|
| 3408 |
static int ipw2100_msg_allocate(struct ipw2100_priv *priv) |
| 3409 |
{ |
| 3410 |
int i, j, err = -EINVAL; |
| 3411 |
void *v; |
| 3412 |
dma_addr_t p; |
| 3413 |
|
| 3414 |
priv->msg_buffers = |
| 3415 |
kmalloc_objs(struct ipw2100_tx_packet, IPW_COMMAND_POOL_SIZE); |
| 3416 |
if (!priv->msg_buffers) |
| 3417 |
return -ENOMEM; |
| 3418 |
|
| 3419 |
for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { |
| 3420 |
v = dma_alloc_coherent(&priv->pci_dev->dev, |
| 3421 |
sizeof(struct ipw2100_cmd_header), &p, |
| 3422 |
GFP_KERNEL); |
| 3423 |
if (!v) { |
| 3424 |
printk(KERN_ERR DRV_NAME ": " |
| 3425 |
"%s: PCI alloc failed for msg " |
| 3426 |
"buffers.\n", priv->net_dev->name); |
| 3427 |
err = -ENOMEM; |
| 3428 |
break; |
| 3429 |
} |
| 3430 |
|
| 3431 |
priv->msg_buffers[i].type = COMMAND; |
| 3432 |
priv->msg_buffers[i].info.c_struct.cmd = |
| 3433 |
(struct ipw2100_cmd_header *)v; |
| 3434 |
priv->msg_buffers[i].info.c_struct.cmd_phys = p; |
| 3435 |
} |
| 3436 |
|
| 3437 |
if (i == IPW_COMMAND_POOL_SIZE) |
| 3438 |
return 0; |
| 3439 |
|
| 3440 |
for (j = 0; j < i; j++) { |
| 3441 |
dma_free_coherent(&priv->pci_dev->dev, |
| 3442 |
sizeof(struct ipw2100_cmd_header), |
| 3443 |
priv->msg_buffers[j].info.c_struct.cmd, |
| 3444 |
priv->msg_buffers[j].info.c_struct.cmd_phys); |
| 3445 |
} |
| 3446 |
|
| 3447 |
kfree(priv->msg_buffers); |
| 3448 |
priv->msg_buffers = NULL; |
| 3449 |
|
| 3450 |
return err; |
| 3451 |
} |
| 3452 |
|
| 3453 |
static int ipw2100_msg_initialize(struct ipw2100_priv *priv) |
| 3454 |
{ |
| 3455 |
int i; |
| 3456 |
|
| 3457 |
INIT_LIST_HEAD(&priv->msg_free_list); |
| 3458 |
INIT_LIST_HEAD(&priv->msg_pend_list); |
| 3459 |
|
| 3460 |
for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) |
| 3461 |
list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list); |
| 3462 |
SET_STAT(&priv->msg_free_stat, i); |
| 3463 |
|
| 3464 |
return 0; |
| 3465 |
} |
| 3466 |
|
| 3467 |
static void ipw2100_msg_free(struct ipw2100_priv *priv) |
| 3468 |
{ |
| 3469 |
int i; |
| 3470 |
|
| 3471 |
if (!priv->msg_buffers) |
| 3472 |
return; |
| 3473 |
|
| 3474 |
for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { |
| 3475 |
dma_free_coherent(&priv->pci_dev->dev, |
| 3476 |
sizeof(struct ipw2100_cmd_header), |
| 3477 |
priv->msg_buffers[i].info.c_struct.cmd, |
| 3478 |
priv->msg_buffers[i].info.c_struct.cmd_phys); |
| 3479 |
} |
| 3480 |
|
| 3481 |
kfree(priv->msg_buffers); |
| 3482 |
priv->msg_buffers = NULL; |
| 3483 |
} |
| 3484 |
|
| 3485 |
static ssize_t pci_show(struct device *d, struct device_attribute *attr, |
| 3486 |
char *buf) |
| 3487 |
{ |
| 3488 |
struct pci_dev *pci_dev = to_pci_dev(d); |
| 3489 |
char *out = buf; |
| 3490 |
int i, j; |
| 3491 |
u32 val; |
| 3492 |
|
| 3493 |
for (i = 0; i < 16; i++) { |
| 3494 |
out += sprintf(out, "[%08X] ", i * 16); |
| 3495 |
for (j = 0; j < 16; j += 4) { |
| 3496 |
pci_read_config_dword(pci_dev, i * 16 + j, &val); |
| 3497 |
out += sprintf(out, "%08X ", val); |
| 3498 |
} |
| 3499 |
out += sprintf(out, "\n"); |
| 3500 |
} |
| 3501 |
|
| 3502 |
return out - buf; |
| 3503 |
} |
| 3504 |
|
| 3505 |
static DEVICE_ATTR_RO(pci); |
| 3506 |
|
| 3507 |
static ssize_t cfg_show(struct device *d, struct device_attribute *attr, |
| 3508 |
char *buf) |
| 3509 |
{ |
| 3510 |
struct ipw2100_priv *p = dev_get_drvdata(d); |
| 3511 |
return sprintf(buf, "0x%08x\n", (int)p->config); |
| 3512 |
} |
| 3513 |
|
| 3514 |
static DEVICE_ATTR_RO(cfg); |
| 3515 |
|
| 3516 |
static ssize_t status_show(struct device *d, struct device_attribute *attr, |
| 3517 |
char *buf) |
| 3518 |
{ |
| 3519 |
struct ipw2100_priv *p = dev_get_drvdata(d); |
| 3520 |
return sprintf(buf, "0x%08x\n", (int)p->status); |
| 3521 |
} |
| 3522 |
|
| 3523 |
static DEVICE_ATTR_RO(status); |
| 3524 |
|
| 3525 |
static ssize_t capability_show(struct device *d, struct device_attribute *attr, |
| 3526 |
char *buf) |
| 3527 |
{ |
| 3528 |
struct ipw2100_priv *p = dev_get_drvdata(d); |
| 3529 |
return sprintf(buf, "0x%08x\n", (int)p->capability); |
| 3530 |
} |
| 3531 |
|
| 3532 |
static DEVICE_ATTR_RO(capability); |
| 3533 |
|
| 3534 |
#define IPW2100_REG(x) { IPW_ ##x, #x } |
| 3535 |
static const struct { |
| 3536 |
u32 addr; |
| 3537 |
const char *name; |
| 3538 |
} hw_data[] = { |
| 3539 |
IPW2100_REG(REG_GP_CNTRL), |
| 3540 |
IPW2100_REG(REG_GPIO), |
| 3541 |
IPW2100_REG(REG_INTA), |
| 3542 |
IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),}; |
| 3543 |
#define IPW2100_NIC(x, s) { x, #x, s } |
| 3544 |
static const struct { |
| 3545 |
u32 addr; |
| 3546 |
const char *name; |
| 3547 |
size_t size; |
| 3548 |
} nic_data[] = { |
| 3549 |
IPW2100_NIC(IPW2100_CONTROL_REG, 2), |
| 3550 |
IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),}; |
| 3551 |
#define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d } |
| 3552 |
static const struct { |
| 3553 |
u8 index; |
| 3554 |
const char *name; |
| 3555 |
const char *desc; |
| 3556 |
} ord_data[] = { |
| 3557 |
IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"), |
| 3558 |
IPW2100_ORD(STAT_TX_HOST_COMPLETE, |
| 3559 |
"successful Host Tx's (MSDU)"), |
| 3560 |
IPW2100_ORD(STAT_TX_DIR_DATA, |
| 3561 |
"successful Directed Tx's (MSDU)"), |
| 3562 |
IPW2100_ORD(STAT_TX_DIR_DATA1, |
| 3563 |
"successful Directed Tx's (MSDU) @ 1MB"), |
| 3564 |
IPW2100_ORD(STAT_TX_DIR_DATA2, |
| 3565 |
"successful Directed Tx's (MSDU) @ 2MB"), |
| 3566 |
IPW2100_ORD(STAT_TX_DIR_DATA5_5, |
| 3567 |
"successful Directed Tx's (MSDU) @ 5_5MB"), |
| 3568 |
IPW2100_ORD(STAT_TX_DIR_DATA11, |
| 3569 |
"successful Directed Tx's (MSDU) @ 11MB"), |
| 3570 |
IPW2100_ORD(STAT_TX_NODIR_DATA1, |
| 3571 |
"successful Non_Directed Tx's (MSDU) @ 1MB"), |
| 3572 |
IPW2100_ORD(STAT_TX_NODIR_DATA2, |
| 3573 |
"successful Non_Directed Tx's (MSDU) @ 2MB"), |
| 3574 |
IPW2100_ORD(STAT_TX_NODIR_DATA5_5, |
| 3575 |
"successful Non_Directed Tx's (MSDU) @ 5.5MB"), |
| 3576 |
IPW2100_ORD(STAT_TX_NODIR_DATA11, |
| 3577 |
"successful Non_Directed Tx's (MSDU) @ 11MB"), |
| 3578 |
IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"), |
| 3579 |
IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"), |
| 3580 |
IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"), |
| 3581 |
IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"), |
| 3582 |
IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"), |
| 3583 |
IPW2100_ORD(STAT_TX_ASSN_RESP, |
| 3584 |
"successful Association response Tx's"), |
| 3585 |
IPW2100_ORD(STAT_TX_REASSN, |
| 3586 |
"successful Reassociation Tx's"), |
| 3587 |
IPW2100_ORD(STAT_TX_REASSN_RESP, |
| 3588 |
"successful Reassociation response Tx's"), |
| 3589 |
IPW2100_ORD(STAT_TX_PROBE, |
| 3590 |
"probes successfully transmitted"), |
| 3591 |
IPW2100_ORD(STAT_TX_PROBE_RESP, |
| 3592 |
"probe responses successfully transmitted"), |
| 3593 |
IPW2100_ORD(STAT_TX_BEACON, "tx beacon"), |
| 3594 |
IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"), |
| 3595 |
IPW2100_ORD(STAT_TX_DISASSN, |
| 3596 |
"successful Disassociation TX"), |
| 3597 |
IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"), |
| 3598 |
IPW2100_ORD(STAT_TX_DEAUTH, |
| 3599 |
"successful Deauthentication TX"), |
| 3600 |
IPW2100_ORD(STAT_TX_TOTAL_BYTES, |
| 3601 |
"Total successful Tx data bytes"), |
| 3602 |
IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"), |
| 3603 |
IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"), |
| 3604 |
IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"), |
| 3605 |
IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"), |
| 3606 |
IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"), |
| 3607 |
IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"), |
| 3608 |
IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP, |
| 3609 |
"times max tries in a hop failed"), |
| 3610 |
IPW2100_ORD(STAT_TX_DISASSN_FAIL, |
| 3611 |
"times disassociation failed"), |
| 3612 |
IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"), |
| 3613 |
IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"), |
| 3614 |
IPW2100_ORD(STAT_RX_HOST, "packets passed to host"), |
| 3615 |
IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"), |
| 3616 |
IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"), |
| 3617 |
IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"), |
| 3618 |
IPW2100_ORD(STAT_RX_DIR_DATA5_5, |
| 3619 |
"directed packets at 5.5MB"), |
| 3620 |
IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"), |
| 3621 |
IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"), |
| 3622 |
IPW2100_ORD(STAT_RX_NODIR_DATA1, |
| 3623 |
"nondirected packets at 1MB"), |
| 3624 |
IPW2100_ORD(STAT_RX_NODIR_DATA2, |
| 3625 |
"nondirected packets at 2MB"), |
| 3626 |
IPW2100_ORD(STAT_RX_NODIR_DATA5_5, |
| 3627 |
"nondirected packets at 5.5MB"), |
| 3628 |
IPW2100_ORD(STAT_RX_NODIR_DATA11, |
| 3629 |
"nondirected packets at 11MB"), |
| 3630 |
IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"), |
| 3631 |
IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS, |
| 3632 |
"Rx CTS"), |
| 3633 |
IPW2100_ORD(STAT_RX_ACK, "Rx ACK"), |
| 3634 |
IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"), |
| 3635 |
IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"), |
| 3636 |
IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"), |
| 3637 |
IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"), |
| 3638 |
IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"), |
| 3639 |
IPW2100_ORD(STAT_RX_REASSN_RESP, |
| 3640 |
"Reassociation response Rx's"), |
| 3641 |
IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"), |
| 3642 |
IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"), |
| 3643 |
IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"), |
| 3644 |
IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"), |
| 3645 |
IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"), |
| 3646 |
IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"), |
| 3647 |
IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"), |
| 3648 |
IPW2100_ORD(STAT_RX_TOTAL_BYTES, |
| 3649 |
"Total rx data bytes received"), |
| 3650 |
IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"), |
| 3651 |
IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"), |
| 3652 |
IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"), |
| 3653 |
IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"), |
| 3654 |
IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"), |
| 3655 |
IPW2100_ORD(STAT_RX_DUPLICATE1, |
| 3656 |
"duplicate rx packets at 1MB"), |
| 3657 |
IPW2100_ORD(STAT_RX_DUPLICATE2, |
| 3658 |
"duplicate rx packets at 2MB"), |
| 3659 |
IPW2100_ORD(STAT_RX_DUPLICATE5_5, |
| 3660 |
"duplicate rx packets at 5.5MB"), |
| 3661 |
IPW2100_ORD(STAT_RX_DUPLICATE11, |
| 3662 |
"duplicate rx packets at 11MB"), |
| 3663 |
IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"), |
| 3664 |
IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"), |
| 3665 |
IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"), |
| 3666 |
IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"), |
| 3667 |
IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, |
| 3668 |
"rx frames with invalid protocol"), |
| 3669 |
IPW2100_ORD(SYS_BOOT_TIME, "Boot time"), |
| 3670 |
IPW2100_ORD(STAT_RX_NO_BUFFER, |
| 3671 |
"rx frames rejected due to no buffer"), |
| 3672 |
IPW2100_ORD(STAT_RX_MISSING_FRAG, |
| 3673 |
"rx frames dropped due to missing fragment"), |
| 3674 |
IPW2100_ORD(STAT_RX_ORPHAN_FRAG, |
| 3675 |
"rx frames dropped due to non-sequential fragment"), |
| 3676 |
IPW2100_ORD(STAT_RX_ORPHAN_FRAME, |
| 3677 |
"rx frames dropped due to unmatched 1st frame"), |
| 3678 |
IPW2100_ORD(STAT_RX_FRAG_AGEOUT, |
| 3679 |
"rx frames dropped due to uncompleted frame"), |
| 3680 |
IPW2100_ORD(STAT_RX_ICV_ERRORS, |
| 3681 |
"ICV errors during decryption"), |
| 3682 |
IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"), |
| 3683 |
IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"), |
| 3684 |
IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, |
| 3685 |
"poll response timeouts"), |
| 3686 |
IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, |
| 3687 |
"timeouts waiting for last {broad,multi}cast pkt"), |
| 3688 |
IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"), |
| 3689 |
IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"), |
| 3690 |
IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"), |
| 3691 |
IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"), |
| 3692 |
IPW2100_ORD(STAT_PERCENT_MISSED_BCNS, |
| 3693 |
"current calculation of % missed beacons"), |
| 3694 |
IPW2100_ORD(STAT_PERCENT_RETRIES, |
| 3695 |
"current calculation of % missed tx retries"), |
| 3696 |
IPW2100_ORD(ASSOCIATED_AP_PTR, |
| 3697 |
"0 if not associated, else pointer to AP table entry"), |
| 3698 |
IPW2100_ORD(AVAILABLE_AP_CNT, |
| 3699 |
"AP's described in the AP table"), |
| 3700 |
IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"), |
| 3701 |
IPW2100_ORD(STAT_AP_ASSNS, "associations"), |
| 3702 |
IPW2100_ORD(STAT_ASSN_FAIL, "association failures"), |
| 3703 |
IPW2100_ORD(STAT_ASSN_RESP_FAIL, |
| 3704 |
"failures due to response fail"), |
| 3705 |
IPW2100_ORD(STAT_FULL_SCANS, "full scans"), |
| 3706 |
IPW2100_ORD(CARD_DISABLED, "Card Disabled"), |
| 3707 |
IPW2100_ORD(STAT_ROAM_INHIBIT, |
| 3708 |
"times roaming was inhibited due to activity"), |
| 3709 |
IPW2100_ORD(RSSI_AT_ASSN, |
| 3710 |
"RSSI of associated AP at time of association"), |
| 3711 |
IPW2100_ORD(STAT_ASSN_CAUSE1, |
| 3712 |
"reassociation: no probe response or TX on hop"), |
| 3713 |
IPW2100_ORD(STAT_ASSN_CAUSE2, |
| 3714 |
"reassociation: poor tx/rx quality"), |
| 3715 |
IPW2100_ORD(STAT_ASSN_CAUSE3, |
| 3716 |
"reassociation: tx/rx quality (excessive AP load"), |
| 3717 |
IPW2100_ORD(STAT_ASSN_CAUSE4, |
| 3718 |
"reassociation: AP RSSI level"), |
| 3719 |
IPW2100_ORD(STAT_ASSN_CAUSE5, |
| 3720 |
"reassociations due to load leveling"), |
| 3721 |
IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"), |
| 3722 |
IPW2100_ORD(STAT_AUTH_RESP_FAIL, |
| 3723 |
"times authentication response failed"), |
| 3724 |
IPW2100_ORD(STATION_TABLE_CNT, |
| 3725 |
"entries in association table"), |
| 3726 |
IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"), |
| 3727 |
IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"), |
| 3728 |
IPW2100_ORD(COUNTRY_CODE, |
| 3729 |
"IEEE country code as recv'd from beacon"), |
| 3730 |
IPW2100_ORD(COUNTRY_CHANNELS, |
| 3731 |
"channels supported by country"), |
| 3732 |
IPW2100_ORD(RESET_CNT, "adapter resets (warm)"), |
| 3733 |
IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"), |
| 3734 |
IPW2100_ORD(ANTENNA_DIVERSITY, |
| 3735 |
"TRUE if antenna diversity is disabled"), |
| 3736 |
IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"), |
| 3737 |
IPW2100_ORD(OUR_FREQ, |
| 3738 |
"current radio freq lower digits - channel ID"), |
| 3739 |
IPW2100_ORD(RTC_TIME, "current RTC time"), |
| 3740 |
IPW2100_ORD(PORT_TYPE, "operating mode"), |
| 3741 |
IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"), |
| 3742 |
IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"), |
| 3743 |
IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"), |
| 3744 |
IPW2100_ORD(BASIC_RATES, "basic tx rates"), |
| 3745 |
IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"), |
| 3746 |
IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"), |
| 3747 |
IPW2100_ORD(CAPABILITIES, |
| 3748 |
"Management frame capability field"), |
| 3749 |
IPW2100_ORD(AUTH_TYPE, "Type of authentication"), |
| 3750 |
IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"), |
| 3751 |
IPW2100_ORD(RTS_THRESHOLD, |
| 3752 |
"Min packet length for RTS handshaking"), |
| 3753 |
IPW2100_ORD(INT_MODE, "International mode"), |
| 3754 |
IPW2100_ORD(FRAGMENTATION_THRESHOLD, |
| 3755 |
"protocol frag threshold"), |
| 3756 |
IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, |
| 3757 |
"EEPROM offset in SRAM"), |
| 3758 |
IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, |
| 3759 |
"EEPROM size in SRAM"), |
| 3760 |
IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"), |
| 3761 |
IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, |
| 3762 |
"EEPROM IBSS 11b channel set"), |
| 3763 |
IPW2100_ORD(MAC_VERSION, "MAC Version"), |
| 3764 |
IPW2100_ORD(MAC_REVISION, "MAC Revision"), |
| 3765 |
IPW2100_ORD(RADIO_VERSION, "Radio Version"), |
| 3766 |
IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"), |
| 3767 |
IPW2100_ORD(UCODE_VERSION, "Ucode Version"),}; |
| 3768 |
|
| 3769 |
static ssize_t registers_show(struct device *d, struct device_attribute *attr, |
| 3770 |
char *buf) |
| 3771 |
{ |
| 3772 |
int i; |
| 3773 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 3774 |
struct net_device *dev = priv->net_dev; |
| 3775 |
char *out = buf; |
| 3776 |
u32 val = 0; |
| 3777 |
|
| 3778 |
out += sprintf(out, "%30s [Address ] : Hex\n", "Register"); |
| 3779 |
|
| 3780 |
for (i = 0; i < ARRAY_SIZE(hw_data); i++) { |
| 3781 |
read_register(dev, hw_data[i].addr, &val); |
| 3782 |
out += sprintf(out, "%30s [%08X] : %08X\n", |
| 3783 |
hw_data[i].name, hw_data[i].addr, val); |
| 3784 |
} |
| 3785 |
|
| 3786 |
return out - buf; |
| 3787 |
} |
| 3788 |
|
| 3789 |
static DEVICE_ATTR_RO(registers); |
| 3790 |
|
| 3791 |
static ssize_t hardware_show(struct device *d, struct device_attribute *attr, |
| 3792 |
char *buf) |
| 3793 |
{ |
| 3794 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 3795 |
struct net_device *dev = priv->net_dev; |
| 3796 |
char *out = buf; |
| 3797 |
int i; |
| 3798 |
|
| 3799 |
out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry"); |
| 3800 |
|
| 3801 |
for (i = 0; i < ARRAY_SIZE(nic_data); i++) { |
| 3802 |
u8 tmp8; |
| 3803 |
u16 tmp16; |
| 3804 |
u32 tmp32; |
| 3805 |
|
| 3806 |
switch (nic_data[i].size) { |
| 3807 |
case 1: |
| 3808 |
read_nic_byte(dev, nic_data[i].addr, &tmp8); |
| 3809 |
out += sprintf(out, "%30s [%08X] : %02X\n", |
| 3810 |
nic_data[i].name, nic_data[i].addr, |
| 3811 |
tmp8); |
| 3812 |
break; |
| 3813 |
case 2: |
| 3814 |
read_nic_word(dev, nic_data[i].addr, &tmp16); |
| 3815 |
out += sprintf(out, "%30s [%08X] : %04X\n", |
| 3816 |
nic_data[i].name, nic_data[i].addr, |
| 3817 |
tmp16); |
| 3818 |
break; |
| 3819 |
case 4: |
| 3820 |
read_nic_dword(dev, nic_data[i].addr, &tmp32); |
| 3821 |
out += sprintf(out, "%30s [%08X] : %08X\n", |
| 3822 |
nic_data[i].name, nic_data[i].addr, |
| 3823 |
tmp32); |
| 3824 |
break; |
| 3825 |
} |
| 3826 |
} |
| 3827 |
return out - buf; |
| 3828 |
} |
| 3829 |
|
| 3830 |
static DEVICE_ATTR_RO(hardware); |
| 3831 |
|
| 3832 |
static ssize_t memory_show(struct device *d, struct device_attribute *attr, |
| 3833 |
char *buf) |
| 3834 |
{ |
| 3835 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 3836 |
struct net_device *dev = priv->net_dev; |
| 3837 |
static unsigned long loop = 0; |
| 3838 |
int len = 0; |
| 3839 |
u32 buffer[4]; |
| 3840 |
int i; |
| 3841 |
char line[81]; |
| 3842 |
|
| 3843 |
if (loop >= 0x30000) |
| 3844 |
loop = 0; |
| 3845 |
|
| 3846 |
/* sysfs provides us PAGE_SIZE buffer */ |
| 3847 |
while (len < PAGE_SIZE - 128 && loop < 0x30000) { |
| 3848 |
|
| 3849 |
if (priv->snapshot[0]) |
| 3850 |
for (i = 0; i < 4; i++) |
| 3851 |
buffer[i] = |
| 3852 |
*(u32 *) SNAPSHOT_ADDR(loop + i * 4); |
| 3853 |
else |
| 3854 |
for (i = 0; i < 4; i++) |
| 3855 |
read_nic_dword(dev, loop + i * 4, &buffer[i]); |
| 3856 |
|
| 3857 |
if (priv->dump_raw) |
| 3858 |
len += sprintf(buf + len, |
| 3859 |
"%c%c%c%c" |
| 3860 |
"%c%c%c%c" |
| 3861 |
"%c%c%c%c" |
| 3862 |
"%c%c%c%c", |
| 3863 |
((u8 *) buffer)[0x0], |
| 3864 |
((u8 *) buffer)[0x1], |
| 3865 |
((u8 *) buffer)[0x2], |
| 3866 |
((u8 *) buffer)[0x3], |
| 3867 |
((u8 *) buffer)[0x4], |
| 3868 |
((u8 *) buffer)[0x5], |
| 3869 |
((u8 *) buffer)[0x6], |
| 3870 |
((u8 *) buffer)[0x7], |
| 3871 |
((u8 *) buffer)[0x8], |
| 3872 |
((u8 *) buffer)[0x9], |
| 3873 |
((u8 *) buffer)[0xa], |
| 3874 |
((u8 *) buffer)[0xb], |
| 3875 |
((u8 *) buffer)[0xc], |
| 3876 |
((u8 *) buffer)[0xd], |
| 3877 |
((u8 *) buffer)[0xe], |
| 3878 |
((u8 *) buffer)[0xf]); |
| 3879 |
else |
| 3880 |
len += sprintf(buf + len, "%s\n", |
| 3881 |
snprint_line(line, sizeof(line), |
| 3882 |
(u8 *) buffer, 16, loop)); |
| 3883 |
loop += 16; |
| 3884 |
} |
| 3885 |
|
| 3886 |
return len; |
| 3887 |
} |
| 3888 |
|
| 3889 |
static ssize_t memory_store(struct device *d, struct device_attribute *attr, |
| 3890 |
const char *buf, size_t count) |
| 3891 |
{ |
| 3892 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 3893 |
struct net_device *dev = priv->net_dev; |
| 3894 |
const char *p = buf; |
| 3895 |
|
| 3896 |
(void)dev; /* kill unused-var warning for debug-only code */ |
| 3897 |
|
| 3898 |
if (count < 1) |
| 3899 |
return count; |
| 3900 |
|
| 3901 |
if (p[0] == '1' || |
| 3902 |
(count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) { |
| 3903 |
IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n", |
| 3904 |
dev->name); |
| 3905 |
priv->dump_raw = 1; |
| 3906 |
|
| 3907 |
} else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' && |
| 3908 |
tolower(p[1]) == 'f')) { |
| 3909 |
IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n", |
| 3910 |
dev->name); |
| 3911 |
priv->dump_raw = 0; |
| 3912 |
|
| 3913 |
} else if (tolower(p[0]) == 'r') { |
| 3914 |
IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name); |
| 3915 |
ipw2100_snapshot_free(priv); |
| 3916 |
|
| 3917 |
} else |
| 3918 |
IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, " |
| 3919 |
"reset = clear memory snapshot\n", dev->name); |
| 3920 |
|
| 3921 |
return count; |
| 3922 |
} |
| 3923 |
|
| 3924 |
static DEVICE_ATTR_RW(memory); |
| 3925 |
|
| 3926 |
static ssize_t ordinals_show(struct device *d, struct device_attribute *attr, |
| 3927 |
char *buf) |
| 3928 |
{ |
| 3929 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 3930 |
u32 val = 0; |
| 3931 |
int len = 0; |
| 3932 |
u32 val_len; |
| 3933 |
static int loop = 0; |
| 3934 |
|
| 3935 |
if (priv->status & STATUS_RF_KILL_MASK) |
| 3936 |
return 0; |
| 3937 |
|
| 3938 |
if (loop >= ARRAY_SIZE(ord_data)) |
| 3939 |
loop = 0; |
| 3940 |
|
| 3941 |
/* sysfs provides us PAGE_SIZE buffer */ |
| 3942 |
while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) { |
| 3943 |
val_len = sizeof(u32); |
| 3944 |
|
| 3945 |
if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val, |
| 3946 |
&val_len)) |
| 3947 |
len += sprintf(buf + len, "[0x%02X] = ERROR %s\n", |
| 3948 |
ord_data[loop].index, |
| 3949 |
ord_data[loop].desc); |
| 3950 |
else |
| 3951 |
len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n", |
| 3952 |
ord_data[loop].index, val, |
| 3953 |
ord_data[loop].desc); |
| 3954 |
loop++; |
| 3955 |
} |
| 3956 |
|
| 3957 |
return len; |
| 3958 |
} |
| 3959 |
|
| 3960 |
static DEVICE_ATTR_RO(ordinals); |
| 3961 |
|
| 3962 |
static ssize_t stats_show(struct device *d, struct device_attribute *attr, |
| 3963 |
char *buf) |
| 3964 |
{ |
| 3965 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 3966 |
char *out = buf; |
| 3967 |
|
| 3968 |
out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n", |
| 3969 |
priv->interrupts, priv->tx_interrupts, |
| 3970 |
priv->rx_interrupts, priv->inta_other); |
| 3971 |
out += sprintf(out, "firmware resets: %d\n", priv->resets); |
| 3972 |
out += sprintf(out, "firmware hangs: %d\n", priv->hangs); |
| 3973 |
#ifdef CONFIG_IPW2100_DEBUG |
| 3974 |
out += sprintf(out, "packet mismatch image: %s\n", |
| 3975 |
priv->snapshot[0] ? "YES" : "NO"); |
| 3976 |
#endif |
| 3977 |
|
| 3978 |
return out - buf; |
| 3979 |
} |
| 3980 |
|
| 3981 |
static DEVICE_ATTR_RO(stats); |
| 3982 |
|
| 3983 |
static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode) |
| 3984 |
{ |
| 3985 |
int err; |
| 3986 |
|
| 3987 |
if (mode == priv->ieee->iw_mode) |
| 3988 |
return 0; |
| 3989 |
|
| 3990 |
err = ipw2100_disable_adapter(priv); |
| 3991 |
if (err) { |
| 3992 |
printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n", |
| 3993 |
priv->net_dev->name, err); |
| 3994 |
return err; |
| 3995 |
} |
| 3996 |
|
| 3997 |
switch (mode) { |
| 3998 |
case IW_MODE_INFRA: |
| 3999 |
priv->net_dev->type = ARPHRD_ETHER; |
| 4000 |
break; |
| 4001 |
case IW_MODE_ADHOC: |
| 4002 |
priv->net_dev->type = ARPHRD_ETHER; |
| 4003 |
break; |
| 4004 |
#ifdef CONFIG_IPW2100_MONITOR |
| 4005 |
case IW_MODE_MONITOR: |
| 4006 |
priv->last_mode = priv->ieee->iw_mode; |
| 4007 |
priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP; |
| 4008 |
break; |
| 4009 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 4010 |
} |
| 4011 |
|
| 4012 |
priv->ieee->iw_mode = mode; |
| 4013 |
|
| 4014 |
#ifdef CONFIG_PM |
| 4015 |
/* Indicate ipw2100_download_firmware download firmware |
| 4016 |
* from disk instead of memory. */ |
| 4017 |
ipw2100_firmware.version = 0; |
| 4018 |
#endif |
| 4019 |
|
| 4020 |
printk(KERN_INFO "%s: Resetting on mode change.\n", priv->net_dev->name); |
| 4021 |
priv->reset_backoff = 0; |
| 4022 |
schedule_reset(priv); |
| 4023 |
|
| 4024 |
return 0; |
| 4025 |
} |
| 4026 |
|
| 4027 |
static ssize_t internals_show(struct device *d, struct device_attribute *attr, |
| 4028 |
char *buf) |
| 4029 |
{ |
| 4030 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4031 |
int len = 0; |
| 4032 |
|
| 4033 |
#define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x) |
| 4034 |
|
| 4035 |
if (priv->status & STATUS_ASSOCIATED) |
| 4036 |
len += sprintf(buf + len, "connected: %llu\n", |
| 4037 |
ktime_get_boottime_seconds() - priv->connect_start); |
| 4038 |
else |
| 4039 |
len += sprintf(buf + len, "not connected\n"); |
| 4040 |
|
| 4041 |
DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p"); |
| 4042 |
DUMP_VAR(status, "08lx"); |
| 4043 |
DUMP_VAR(config, "08lx"); |
| 4044 |
DUMP_VAR(capability, "08lx"); |
| 4045 |
|
| 4046 |
len += |
| 4047 |
sprintf(buf + len, "last_rtc: %lu\n", |
| 4048 |
(unsigned long)priv->last_rtc); |
| 4049 |
|
| 4050 |
DUMP_VAR(fatal_error, "d"); |
| 4051 |
DUMP_VAR(stop_hang_check, "d"); |
| 4052 |
DUMP_VAR(stop_rf_kill, "d"); |
| 4053 |
DUMP_VAR(messages_sent, "d"); |
| 4054 |
|
| 4055 |
DUMP_VAR(tx_pend_stat.value, "d"); |
| 4056 |
DUMP_VAR(tx_pend_stat.hi, "d"); |
| 4057 |
|
| 4058 |
DUMP_VAR(tx_free_stat.value, "d"); |
| 4059 |
DUMP_VAR(tx_free_stat.lo, "d"); |
| 4060 |
|
| 4061 |
DUMP_VAR(msg_free_stat.value, "d"); |
| 4062 |
DUMP_VAR(msg_free_stat.lo, "d"); |
| 4063 |
|
| 4064 |
DUMP_VAR(msg_pend_stat.value, "d"); |
| 4065 |
DUMP_VAR(msg_pend_stat.hi, "d"); |
| 4066 |
|
| 4067 |
DUMP_VAR(fw_pend_stat.value, "d"); |
| 4068 |
DUMP_VAR(fw_pend_stat.hi, "d"); |
| 4069 |
|
| 4070 |
DUMP_VAR(txq_stat.value, "d"); |
| 4071 |
DUMP_VAR(txq_stat.lo, "d"); |
| 4072 |
|
| 4073 |
DUMP_VAR(ieee->scans, "d"); |
| 4074 |
DUMP_VAR(reset_backoff, "lld"); |
| 4075 |
|
| 4076 |
return len; |
| 4077 |
} |
| 4078 |
|
| 4079 |
static DEVICE_ATTR_RO(internals); |
| 4080 |
|
| 4081 |
static ssize_t bssinfo_show(struct device *d, struct device_attribute *attr, |
| 4082 |
char *buf) |
| 4083 |
{ |
| 4084 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4085 |
char essid[IW_ESSID_MAX_SIZE + 1]; |
| 4086 |
u8 bssid[ETH_ALEN]; |
| 4087 |
u32 chan = 0; |
| 4088 |
char *out = buf; |
| 4089 |
unsigned int length; |
| 4090 |
int ret; |
| 4091 |
|
| 4092 |
if (priv->status & STATUS_RF_KILL_MASK) |
| 4093 |
return 0; |
| 4094 |
|
| 4095 |
memset(essid, 0, sizeof(essid)); |
| 4096 |
memset(bssid, 0, sizeof(bssid)); |
| 4097 |
|
| 4098 |
length = IW_ESSID_MAX_SIZE; |
| 4099 |
ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length); |
| 4100 |
if (ret) |
| 4101 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 4102 |
__LINE__); |
| 4103 |
|
| 4104 |
length = sizeof(bssid); |
| 4105 |
ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, |
| 4106 |
bssid, &length); |
| 4107 |
if (ret) |
| 4108 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 4109 |
__LINE__); |
| 4110 |
|
| 4111 |
length = sizeof(u32); |
| 4112 |
ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length); |
| 4113 |
if (ret) |
| 4114 |
IPW_DEBUG_INFO("failed querying ordinals at line %d\n", |
| 4115 |
__LINE__); |
| 4116 |
|
| 4117 |
out += sprintf(out, "ESSID: %s\n", essid); |
| 4118 |
out += sprintf(out, "BSSID: %pM\n", bssid); |
| 4119 |
out += sprintf(out, "Channel: %d\n", chan); |
| 4120 |
|
| 4121 |
return out - buf; |
| 4122 |
} |
| 4123 |
|
| 4124 |
static DEVICE_ATTR_RO(bssinfo); |
| 4125 |
|
| 4126 |
#ifdef CONFIG_IPW2100_DEBUG |
| 4127 |
static ssize_t debug_level_show(struct device_driver *d, char *buf) |
| 4128 |
{ |
| 4129 |
return sprintf(buf, "0x%08X\n", ipw2100_debug_level); |
| 4130 |
} |
| 4131 |
|
| 4132 |
static ssize_t debug_level_store(struct device_driver *d, |
| 4133 |
const char *buf, size_t count) |
| 4134 |
{ |
| 4135 |
u32 val; |
| 4136 |
int ret; |
| 4137 |
|
| 4138 |
ret = kstrtou32(buf, 0, &val); |
| 4139 |
if (ret) |
| 4140 |
IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf); |
| 4141 |
else |
| 4142 |
ipw2100_debug_level = val; |
| 4143 |
|
| 4144 |
return strnlen(buf, count); |
| 4145 |
} |
| 4146 |
static DRIVER_ATTR_RW(debug_level); |
| 4147 |
#endif /* CONFIG_IPW2100_DEBUG */ |
| 4148 |
|
| 4149 |
static ssize_t fatal_error_show(struct device *d, |
| 4150 |
struct device_attribute *attr, char *buf) |
| 4151 |
{ |
| 4152 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4153 |
char *out = buf; |
| 4154 |
int i; |
| 4155 |
|
| 4156 |
if (priv->fatal_error) |
| 4157 |
out += sprintf(out, "0x%08X\n", priv->fatal_error); |
| 4158 |
else |
| 4159 |
out += sprintf(out, "0\n"); |
| 4160 |
|
| 4161 |
for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) { |
| 4162 |
if (!priv->fatal_errors[(priv->fatal_index - i) % |
| 4163 |
IPW2100_ERROR_QUEUE]) |
| 4164 |
continue; |
| 4165 |
|
| 4166 |
out += sprintf(out, "%d. 0x%08X\n", i, |
| 4167 |
priv->fatal_errors[(priv->fatal_index - i) % |
| 4168 |
IPW2100_ERROR_QUEUE]); |
| 4169 |
} |
| 4170 |
|
| 4171 |
return out - buf; |
| 4172 |
} |
| 4173 |
|
| 4174 |
static ssize_t fatal_error_store(struct device *d, |
| 4175 |
struct device_attribute *attr, const char *buf, |
| 4176 |
size_t count) |
| 4177 |
{ |
| 4178 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4179 |
schedule_reset(priv); |
| 4180 |
return count; |
| 4181 |
} |
| 4182 |
|
| 4183 |
static DEVICE_ATTR_RW(fatal_error); |
| 4184 |
|
| 4185 |
static ssize_t scan_age_show(struct device *d, struct device_attribute *attr, |
| 4186 |
char *buf) |
| 4187 |
{ |
| 4188 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4189 |
return sprintf(buf, "%d\n", priv->ieee->scan_age); |
| 4190 |
} |
| 4191 |
|
| 4192 |
static ssize_t scan_age_store(struct device *d, struct device_attribute *attr, |
| 4193 |
const char *buf, size_t count) |
| 4194 |
{ |
| 4195 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4196 |
struct net_device *dev = priv->net_dev; |
| 4197 |
unsigned long val; |
| 4198 |
int ret; |
| 4199 |
|
| 4200 |
(void)dev; /* kill unused-var warning for debug-only code */ |
| 4201 |
|
| 4202 |
IPW_DEBUG_INFO("enter\n"); |
| 4203 |
|
| 4204 |
ret = kstrtoul(buf, 0, &val); |
| 4205 |
if (ret) { |
| 4206 |
IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name); |
| 4207 |
} else { |
| 4208 |
priv->ieee->scan_age = val; |
| 4209 |
IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age); |
| 4210 |
} |
| 4211 |
|
| 4212 |
IPW_DEBUG_INFO("exit\n"); |
| 4213 |
return strnlen(buf, count); |
| 4214 |
} |
| 4215 |
|
| 4216 |
static DEVICE_ATTR_RW(scan_age); |
| 4217 |
|
| 4218 |
static ssize_t rf_kill_show(struct device *d, struct device_attribute *attr, |
| 4219 |
char *buf) |
| 4220 |
{ |
| 4221 |
/* 0 - RF kill not enabled |
| 4222 |
1 - SW based RF kill active (sysfs) |
| 4223 |
2 - HW based RF kill active |
| 4224 |
3 - Both HW and SW baed RF kill active */ |
| 4225 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4226 |
int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | |
| 4227 |
(rf_kill_active(priv) ? 0x2 : 0x0); |
| 4228 |
return sprintf(buf, "%i\n", val); |
| 4229 |
} |
| 4230 |
|
| 4231 |
static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio) |
| 4232 |
{ |
| 4233 |
if ((disable_radio ? 1 : 0) == |
| 4234 |
(priv->status & STATUS_RF_KILL_SW ? 1 : 0)) |
| 4235 |
return 0; |
| 4236 |
|
| 4237 |
IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n", |
| 4238 |
disable_radio ? "OFF" : "ON"); |
| 4239 |
|
| 4240 |
mutex_lock(&priv->action_mutex); |
| 4241 |
|
| 4242 |
if (disable_radio) { |
| 4243 |
priv->status |= STATUS_RF_KILL_SW; |
| 4244 |
ipw2100_down(priv); |
| 4245 |
} else { |
| 4246 |
priv->status &= ~STATUS_RF_KILL_SW; |
| 4247 |
if (rf_kill_active(priv)) { |
| 4248 |
IPW_DEBUG_RF_KILL("Can not turn radio back on - " |
| 4249 |
"disabled by HW switch\n"); |
| 4250 |
/* Make sure the RF_KILL check timer is running */ |
| 4251 |
priv->stop_rf_kill = 0; |
| 4252 |
mod_delayed_work(system_percpu_wq, &priv->rf_kill, |
| 4253 |
round_jiffies_relative(HZ)); |
| 4254 |
} else |
| 4255 |
schedule_reset(priv); |
| 4256 |
} |
| 4257 |
|
| 4258 |
mutex_unlock(&priv->action_mutex); |
| 4259 |
return 1; |
| 4260 |
} |
| 4261 |
|
| 4262 |
static ssize_t rf_kill_store(struct device *d, struct device_attribute *attr, |
| 4263 |
const char *buf, size_t count) |
| 4264 |
{ |
| 4265 |
struct ipw2100_priv *priv = dev_get_drvdata(d); |
| 4266 |
ipw_radio_kill_sw(priv, buf[0] == '1'); |
| 4267 |
return count; |
| 4268 |
} |
| 4269 |
|
| 4270 |
static DEVICE_ATTR_RW(rf_kill); |
| 4271 |
|
| 4272 |
static struct attribute *ipw2100_sysfs_entries[] = { |
| 4273 |
&dev_attr_hardware.attr, |
| 4274 |
&dev_attr_registers.attr, |
| 4275 |
&dev_attr_ordinals.attr, |
| 4276 |
&dev_attr_pci.attr, |
| 4277 |
&dev_attr_stats.attr, |
| 4278 |
&dev_attr_internals.attr, |
| 4279 |
&dev_attr_bssinfo.attr, |
| 4280 |
&dev_attr_memory.attr, |
| 4281 |
&dev_attr_scan_age.attr, |
| 4282 |
&dev_attr_fatal_error.attr, |
| 4283 |
&dev_attr_rf_kill.attr, |
| 4284 |
&dev_attr_cfg.attr, |
| 4285 |
&dev_attr_status.attr, |
| 4286 |
&dev_attr_capability.attr, |
| 4287 |
NULL, |
| 4288 |
}; |
| 4289 |
|
| 4290 |
static const struct attribute_group ipw2100_attribute_group = { |
| 4291 |
.attrs = ipw2100_sysfs_entries, |
| 4292 |
}; |
| 4293 |
|
| 4294 |
static int status_queue_allocate(struct ipw2100_priv *priv, int entries) |
| 4295 |
{ |
| 4296 |
struct ipw2100_status_queue *q = &priv->status_queue; |
| 4297 |
|
| 4298 |
IPW_DEBUG_INFO("enter\n"); |
| 4299 |
|
| 4300 |
q->size = entries * sizeof(struct ipw2100_status); |
| 4301 |
q->drv = dma_alloc_coherent(&priv->pci_dev->dev, q->size, &q->nic, |
| 4302 |
GFP_KERNEL); |
| 4303 |
if (!q->drv) { |
| 4304 |
IPW_DEBUG_WARNING("Can not allocate status queue.\n"); |
| 4305 |
return -ENOMEM; |
| 4306 |
} |
| 4307 |
|
| 4308 |
IPW_DEBUG_INFO("exit\n"); |
| 4309 |
|
| 4310 |
return 0; |
| 4311 |
} |
| 4312 |
|
| 4313 |
static void status_queue_free(struct ipw2100_priv *priv) |
| 4314 |
{ |
| 4315 |
IPW_DEBUG_INFO("enter\n"); |
| 4316 |
|
| 4317 |
if (priv->status_queue.drv) { |
| 4318 |
dma_free_coherent(&priv->pci_dev->dev, |
| 4319 |
priv->status_queue.size, |
| 4320 |
priv->status_queue.drv, |
| 4321 |
priv->status_queue.nic); |
| 4322 |
priv->status_queue.drv = NULL; |
| 4323 |
} |
| 4324 |
|
| 4325 |
IPW_DEBUG_INFO("exit\n"); |
| 4326 |
} |
| 4327 |
|
| 4328 |
static int bd_queue_allocate(struct ipw2100_priv *priv, |
| 4329 |
struct ipw2100_bd_queue *q, int entries) |
| 4330 |
{ |
| 4331 |
IPW_DEBUG_INFO("enter\n"); |
| 4332 |
|
| 4333 |
memset(q, 0, sizeof(struct ipw2100_bd_queue)); |
| 4334 |
|
| 4335 |
q->entries = entries; |
| 4336 |
q->size = entries * sizeof(struct ipw2100_bd); |
| 4337 |
q->drv = dma_alloc_coherent(&priv->pci_dev->dev, q->size, &q->nic, |
| 4338 |
GFP_KERNEL); |
| 4339 |
if (!q->drv) { |
| 4340 |
IPW_DEBUG_INFO |
| 4341 |
("can't allocate shared memory for buffer descriptors\n"); |
| 4342 |
return -ENOMEM; |
| 4343 |
} |
| 4344 |
|
| 4345 |
IPW_DEBUG_INFO("exit\n"); |
| 4346 |
|
| 4347 |
return 0; |
| 4348 |
} |
| 4349 |
|
| 4350 |
static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q) |
| 4351 |
{ |
| 4352 |
IPW_DEBUG_INFO("enter\n"); |
| 4353 |
|
| 4354 |
if (!q) |
| 4355 |
return; |
| 4356 |
|
| 4357 |
if (q->drv) { |
| 4358 |
dma_free_coherent(&priv->pci_dev->dev, q->size, q->drv, |
| 4359 |
q->nic); |
| 4360 |
q->drv = NULL; |
| 4361 |
} |
| 4362 |
|
| 4363 |
IPW_DEBUG_INFO("exit\n"); |
| 4364 |
} |
| 4365 |
|
| 4366 |
static void bd_queue_initialize(struct ipw2100_priv *priv, |
| 4367 |
struct ipw2100_bd_queue *q, u32 base, u32 size, |
| 4368 |
u32 r, u32 w) |
| 4369 |
{ |
| 4370 |
IPW_DEBUG_INFO("enter\n"); |
| 4371 |
|
| 4372 |
IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, |
| 4373 |
(u32) q->nic); |
| 4374 |
|
| 4375 |
write_register(priv->net_dev, base, q->nic); |
| 4376 |
write_register(priv->net_dev, size, q->entries); |
| 4377 |
write_register(priv->net_dev, r, q->oldest); |
| 4378 |
write_register(priv->net_dev, w, q->next); |
| 4379 |
|
| 4380 |
IPW_DEBUG_INFO("exit\n"); |
| 4381 |
} |
| 4382 |
|
| 4383 |
static void ipw2100_kill_works(struct ipw2100_priv *priv) |
| 4384 |
{ |
| 4385 |
priv->stop_rf_kill = 1; |
| 4386 |
priv->stop_hang_check = 1; |
| 4387 |
cancel_delayed_work_sync(&priv->reset_work); |
| 4388 |
cancel_delayed_work_sync(&priv->security_work); |
| 4389 |
cancel_delayed_work_sync(&priv->wx_event_work); |
| 4390 |
cancel_delayed_work_sync(&priv->hang_check); |
| 4391 |
cancel_delayed_work_sync(&priv->rf_kill); |
| 4392 |
cancel_delayed_work_sync(&priv->scan_event); |
| 4393 |
} |
| 4394 |
|
| 4395 |
static int ipw2100_tx_allocate(struct ipw2100_priv *priv) |
| 4396 |
{ |
| 4397 |
int i, j, err; |
| 4398 |
void *v; |
| 4399 |
dma_addr_t p; |
| 4400 |
|
| 4401 |
IPW_DEBUG_INFO("enter\n"); |
| 4402 |
|
| 4403 |
err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH); |
| 4404 |
if (err) { |
| 4405 |
IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n", |
| 4406 |
priv->net_dev->name); |
| 4407 |
return err; |
| 4408 |
} |
| 4409 |
|
| 4410 |
priv->tx_buffers = kmalloc_objs(struct ipw2100_tx_packet, |
| 4411 |
TX_PENDED_QUEUE_LENGTH); |
| 4412 |
if (!priv->tx_buffers) { |
| 4413 |
bd_queue_free(priv, &priv->tx_queue); |
| 4414 |
return -ENOMEM; |
| 4415 |
} |
| 4416 |
|
| 4417 |
for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
| 4418 |
v = dma_alloc_coherent(&priv->pci_dev->dev, |
| 4419 |
sizeof(struct ipw2100_data_header), &p, |
| 4420 |
GFP_KERNEL); |
| 4421 |
if (!v) { |
| 4422 |
printk(KERN_ERR DRV_NAME |
| 4423 |
": %s: PCI alloc failed for tx " "buffers.\n", |
| 4424 |
priv->net_dev->name); |
| 4425 |
err = -ENOMEM; |
| 4426 |
break; |
| 4427 |
} |
| 4428 |
|
| 4429 |
priv->tx_buffers[i].type = DATA; |
| 4430 |
priv->tx_buffers[i].info.d_struct.data = |
| 4431 |
(struct ipw2100_data_header *)v; |
| 4432 |
priv->tx_buffers[i].info.d_struct.data_phys = p; |
| 4433 |
priv->tx_buffers[i].info.d_struct.txb = NULL; |
| 4434 |
} |
| 4435 |
|
| 4436 |
if (i == TX_PENDED_QUEUE_LENGTH) |
| 4437 |
return 0; |
| 4438 |
|
| 4439 |
for (j = 0; j < i; j++) { |
| 4440 |
dma_free_coherent(&priv->pci_dev->dev, |
| 4441 |
sizeof(struct ipw2100_data_header), |
| 4442 |
priv->tx_buffers[j].info.d_struct.data, |
| 4443 |
priv->tx_buffers[j].info.d_struct.data_phys); |
| 4444 |
} |
| 4445 |
|
| 4446 |
kfree(priv->tx_buffers); |
| 4447 |
priv->tx_buffers = NULL; |
| 4448 |
|
| 4449 |
return err; |
| 4450 |
} |
| 4451 |
|
| 4452 |
static void ipw2100_tx_initialize(struct ipw2100_priv *priv) |
| 4453 |
{ |
| 4454 |
int i; |
| 4455 |
|
| 4456 |
IPW_DEBUG_INFO("enter\n"); |
| 4457 |
|
| 4458 |
/* |
| 4459 |
* reinitialize packet info lists |
| 4460 |
*/ |
| 4461 |
INIT_LIST_HEAD(&priv->fw_pend_list); |
| 4462 |
INIT_STAT(&priv->fw_pend_stat); |
| 4463 |
|
| 4464 |
/* |
| 4465 |
* reinitialize lists |
| 4466 |
*/ |
| 4467 |
INIT_LIST_HEAD(&priv->tx_pend_list); |
| 4468 |
INIT_LIST_HEAD(&priv->tx_free_list); |
| 4469 |
INIT_STAT(&priv->tx_pend_stat); |
| 4470 |
INIT_STAT(&priv->tx_free_stat); |
| 4471 |
|
| 4472 |
for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
| 4473 |
/* We simply drop any SKBs that have been queued for |
| 4474 |
* transmit */ |
| 4475 |
if (priv->tx_buffers[i].info.d_struct.txb) { |
| 4476 |
libipw_txb_free(priv->tx_buffers[i].info.d_struct. |
| 4477 |
txb); |
| 4478 |
priv->tx_buffers[i].info.d_struct.txb = NULL; |
| 4479 |
} |
| 4480 |
|
| 4481 |
list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list); |
| 4482 |
} |
| 4483 |
|
| 4484 |
SET_STAT(&priv->tx_free_stat, i); |
| 4485 |
|
| 4486 |
priv->tx_queue.oldest = 0; |
| 4487 |
priv->tx_queue.available = priv->tx_queue.entries; |
| 4488 |
priv->tx_queue.next = 0; |
| 4489 |
INIT_STAT(&priv->txq_stat); |
| 4490 |
SET_STAT(&priv->txq_stat, priv->tx_queue.available); |
| 4491 |
|
| 4492 |
bd_queue_initialize(priv, &priv->tx_queue, |
| 4493 |
IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE, |
| 4494 |
IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE, |
| 4495 |
IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, |
| 4496 |
IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX); |
| 4497 |
|
| 4498 |
IPW_DEBUG_INFO("exit\n"); |
| 4499 |
|
| 4500 |
} |
| 4501 |
|
| 4502 |
static void ipw2100_tx_free(struct ipw2100_priv *priv) |
| 4503 |
{ |
| 4504 |
int i; |
| 4505 |
|
| 4506 |
IPW_DEBUG_INFO("enter\n"); |
| 4507 |
|
| 4508 |
bd_queue_free(priv, &priv->tx_queue); |
| 4509 |
|
| 4510 |
if (!priv->tx_buffers) |
| 4511 |
return; |
| 4512 |
|
| 4513 |
for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
| 4514 |
if (priv->tx_buffers[i].info.d_struct.txb) { |
| 4515 |
libipw_txb_free(priv->tx_buffers[i].info.d_struct. |
| 4516 |
txb); |
| 4517 |
priv->tx_buffers[i].info.d_struct.txb = NULL; |
| 4518 |
} |
| 4519 |
if (priv->tx_buffers[i].info.d_struct.data) |
| 4520 |
dma_free_coherent(&priv->pci_dev->dev, |
| 4521 |
sizeof(struct ipw2100_data_header), |
| 4522 |
priv->tx_buffers[i].info.d_struct.data, |
| 4523 |
priv->tx_buffers[i].info.d_struct.data_phys); |
| 4524 |
} |
| 4525 |
|
| 4526 |
kfree(priv->tx_buffers); |
| 4527 |
priv->tx_buffers = NULL; |
| 4528 |
|
| 4529 |
IPW_DEBUG_INFO("exit\n"); |
| 4530 |
} |
| 4531 |
|
| 4532 |
static int ipw2100_rx_allocate(struct ipw2100_priv *priv) |
| 4533 |
{ |
| 4534 |
int i, j, err = -EINVAL; |
| 4535 |
|
| 4536 |
IPW_DEBUG_INFO("enter\n"); |
| 4537 |
|
| 4538 |
err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH); |
| 4539 |
if (err) { |
| 4540 |
IPW_DEBUG_INFO("failed bd_queue_allocate\n"); |
| 4541 |
return err; |
| 4542 |
} |
| 4543 |
|
| 4544 |
err = status_queue_allocate(priv, RX_QUEUE_LENGTH); |
| 4545 |
if (err) { |
| 4546 |
IPW_DEBUG_INFO("failed status_queue_allocate\n"); |
| 4547 |
bd_queue_free(priv, &priv->rx_queue); |
| 4548 |
return err; |
| 4549 |
} |
| 4550 |
|
| 4551 |
/* |
| 4552 |
* allocate packets |
| 4553 |
*/ |
| 4554 |
priv->rx_buffers = kmalloc_objs(struct ipw2100_rx_packet, |
| 4555 |
RX_QUEUE_LENGTH); |
| 4556 |
if (!priv->rx_buffers) { |
| 4557 |
IPW_DEBUG_INFO("can't allocate rx packet buffer table\n"); |
| 4558 |
|
| 4559 |
bd_queue_free(priv, &priv->rx_queue); |
| 4560 |
|
| 4561 |
status_queue_free(priv); |
| 4562 |
|
| 4563 |
return -ENOMEM; |
| 4564 |
} |
| 4565 |
|
| 4566 |
for (i = 0; i < RX_QUEUE_LENGTH; i++) { |
| 4567 |
struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
| 4568 |
|
| 4569 |
err = ipw2100_alloc_skb(priv, packet); |
| 4570 |
if (unlikely(err)) { |
| 4571 |
err = -ENOMEM; |
| 4572 |
break; |
| 4573 |
} |
| 4574 |
|
| 4575 |
/* The BD holds the cache aligned address */ |
| 4576 |
priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
| 4577 |
priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH; |
| 4578 |
priv->status_queue.drv[i].status_fields = 0; |
| 4579 |
} |
| 4580 |
|
| 4581 |
if (i == RX_QUEUE_LENGTH) |
| 4582 |
return 0; |
| 4583 |
|
| 4584 |
for (j = 0; j < i; j++) { |
| 4585 |
dma_unmap_single(&priv->pci_dev->dev, |
| 4586 |
priv->rx_buffers[j].dma_addr, |
| 4587 |
sizeof(struct ipw2100_rx_packet), |
| 4588 |
DMA_FROM_DEVICE); |
| 4589 |
dev_kfree_skb(priv->rx_buffers[j].skb); |
| 4590 |
} |
| 4591 |
|
| 4592 |
kfree(priv->rx_buffers); |
| 4593 |
priv->rx_buffers = NULL; |
| 4594 |
|
| 4595 |
bd_queue_free(priv, &priv->rx_queue); |
| 4596 |
|
| 4597 |
status_queue_free(priv); |
| 4598 |
|
| 4599 |
return err; |
| 4600 |
} |
| 4601 |
|
| 4602 |
static void ipw2100_rx_initialize(struct ipw2100_priv *priv) |
| 4603 |
{ |
| 4604 |
IPW_DEBUG_INFO("enter\n"); |
| 4605 |
|
| 4606 |
priv->rx_queue.oldest = 0; |
| 4607 |
priv->rx_queue.available = priv->rx_queue.entries - 1; |
| 4608 |
priv->rx_queue.next = priv->rx_queue.entries - 1; |
| 4609 |
|
| 4610 |
INIT_STAT(&priv->rxq_stat); |
| 4611 |
SET_STAT(&priv->rxq_stat, priv->rx_queue.available); |
| 4612 |
|
| 4613 |
bd_queue_initialize(priv, &priv->rx_queue, |
| 4614 |
IPW_MEM_HOST_SHARED_RX_BD_BASE, |
| 4615 |
IPW_MEM_HOST_SHARED_RX_BD_SIZE, |
| 4616 |
IPW_MEM_HOST_SHARED_RX_READ_INDEX, |
| 4617 |
IPW_MEM_HOST_SHARED_RX_WRITE_INDEX); |
| 4618 |
|
| 4619 |
/* set up the status queue */ |
| 4620 |
write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE, |
| 4621 |
priv->status_queue.nic); |
| 4622 |
|
| 4623 |
IPW_DEBUG_INFO("exit\n"); |
| 4624 |
} |
| 4625 |
|
| 4626 |
static void ipw2100_rx_free(struct ipw2100_priv *priv) |
| 4627 |
{ |
| 4628 |
int i; |
| 4629 |
|
| 4630 |
IPW_DEBUG_INFO("enter\n"); |
| 4631 |
|
| 4632 |
bd_queue_free(priv, &priv->rx_queue); |
| 4633 |
status_queue_free(priv); |
| 4634 |
|
| 4635 |
if (!priv->rx_buffers) |
| 4636 |
return; |
| 4637 |
|
| 4638 |
for (i = 0; i < RX_QUEUE_LENGTH; i++) { |
| 4639 |
if (priv->rx_buffers[i].rxp) { |
| 4640 |
dma_unmap_single(&priv->pci_dev->dev, |
| 4641 |
priv->rx_buffers[i].dma_addr, |
| 4642 |
sizeof(struct ipw2100_rx), |
| 4643 |
DMA_FROM_DEVICE); |
| 4644 |
dev_kfree_skb(priv->rx_buffers[i].skb); |
| 4645 |
} |
| 4646 |
} |
| 4647 |
|
| 4648 |
kfree(priv->rx_buffers); |
| 4649 |
priv->rx_buffers = NULL; |
| 4650 |
|
| 4651 |
IPW_DEBUG_INFO("exit\n"); |
| 4652 |
} |
| 4653 |
|
| 4654 |
static int ipw2100_read_mac_address(struct ipw2100_priv *priv) |
| 4655 |
{ |
| 4656 |
u32 length = ETH_ALEN; |
| 4657 |
u8 addr[ETH_ALEN]; |
| 4658 |
|
| 4659 |
int err; |
| 4660 |
|
| 4661 |
err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, addr, &length); |
| 4662 |
if (err) { |
| 4663 |
IPW_DEBUG_INFO("MAC address read failed\n"); |
| 4664 |
return -EIO; |
| 4665 |
} |
| 4666 |
|
| 4667 |
eth_hw_addr_set(priv->net_dev, addr); |
| 4668 |
IPW_DEBUG_INFO("card MAC is %pM\n", priv->net_dev->dev_addr); |
| 4669 |
|
| 4670 |
return 0; |
| 4671 |
} |
| 4672 |
|
| 4673 |
/******************************************************************** |
| 4674 |
* |
| 4675 |
* Firmware Commands |
| 4676 |
* |
| 4677 |
********************************************************************/ |
| 4678 |
|
| 4679 |
static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode) |
| 4680 |
{ |
| 4681 |
struct host_command cmd = { |
| 4682 |
.host_command = ADAPTER_ADDRESS, |
| 4683 |
.host_command_sequence = 0, |
| 4684 |
.host_command_length = ETH_ALEN |
| 4685 |
}; |
| 4686 |
int err; |
| 4687 |
|
| 4688 |
IPW_DEBUG_HC("SET_MAC_ADDRESS\n"); |
| 4689 |
|
| 4690 |
IPW_DEBUG_INFO("enter\n"); |
| 4691 |
|
| 4692 |
if (priv->config & CFG_CUSTOM_MAC) { |
| 4693 |
memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN); |
| 4694 |
eth_hw_addr_set(priv->net_dev, priv->mac_addr); |
| 4695 |
} else |
| 4696 |
memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr, |
| 4697 |
ETH_ALEN); |
| 4698 |
|
| 4699 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4700 |
|
| 4701 |
IPW_DEBUG_INFO("exit\n"); |
| 4702 |
return err; |
| 4703 |
} |
| 4704 |
|
| 4705 |
static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type, |
| 4706 |
int batch_mode) |
| 4707 |
{ |
| 4708 |
struct host_command cmd = { |
| 4709 |
.host_command = PORT_TYPE, |
| 4710 |
.host_command_sequence = 0, |
| 4711 |
.host_command_length = sizeof(u32) |
| 4712 |
}; |
| 4713 |
int err; |
| 4714 |
|
| 4715 |
switch (port_type) { |
| 4716 |
case IW_MODE_INFRA: |
| 4717 |
cmd.host_command_parameters[0] = IPW_BSS; |
| 4718 |
break; |
| 4719 |
case IW_MODE_ADHOC: |
| 4720 |
cmd.host_command_parameters[0] = IPW_IBSS; |
| 4721 |
break; |
| 4722 |
} |
| 4723 |
|
| 4724 |
IPW_DEBUG_HC("PORT_TYPE: %s\n", |
| 4725 |
port_type == IPW_IBSS ? "Ad-Hoc" : "Managed"); |
| 4726 |
|
| 4727 |
if (!batch_mode) { |
| 4728 |
err = ipw2100_disable_adapter(priv); |
| 4729 |
if (err) { |
| 4730 |
printk(KERN_ERR DRV_NAME |
| 4731 |
": %s: Could not disable adapter %d\n", |
| 4732 |
priv->net_dev->name, err); |
| 4733 |
return err; |
| 4734 |
} |
| 4735 |
} |
| 4736 |
|
| 4737 |
/* send cmd to firmware */ |
| 4738 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4739 |
|
| 4740 |
if (!batch_mode) |
| 4741 |
ipw2100_enable_adapter(priv); |
| 4742 |
|
| 4743 |
return err; |
| 4744 |
} |
| 4745 |
|
| 4746 |
static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, |
| 4747 |
int batch_mode) |
| 4748 |
{ |
| 4749 |
struct host_command cmd = { |
| 4750 |
.host_command = CHANNEL, |
| 4751 |
.host_command_sequence = 0, |
| 4752 |
.host_command_length = sizeof(u32) |
| 4753 |
}; |
| 4754 |
int err; |
| 4755 |
|
| 4756 |
cmd.host_command_parameters[0] = channel; |
| 4757 |
|
| 4758 |
IPW_DEBUG_HC("CHANNEL: %d\n", channel); |
| 4759 |
|
| 4760 |
/* If BSS then we don't support channel selection */ |
| 4761 |
if (priv->ieee->iw_mode == IW_MODE_INFRA) |
| 4762 |
return 0; |
| 4763 |
|
| 4764 |
if ((channel != 0) && |
| 4765 |
((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL))) |
| 4766 |
return -EINVAL; |
| 4767 |
|
| 4768 |
if (!batch_mode) { |
| 4769 |
err = ipw2100_disable_adapter(priv); |
| 4770 |
if (err) |
| 4771 |
return err; |
| 4772 |
} |
| 4773 |
|
| 4774 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4775 |
if (err) { |
| 4776 |
IPW_DEBUG_INFO("Failed to set channel to %d", channel); |
| 4777 |
return err; |
| 4778 |
} |
| 4779 |
|
| 4780 |
if (channel) |
| 4781 |
priv->config |= CFG_STATIC_CHANNEL; |
| 4782 |
else |
| 4783 |
priv->config &= ~CFG_STATIC_CHANNEL; |
| 4784 |
|
| 4785 |
priv->channel = channel; |
| 4786 |
|
| 4787 |
if (!batch_mode) { |
| 4788 |
err = ipw2100_enable_adapter(priv); |
| 4789 |
if (err) |
| 4790 |
return err; |
| 4791 |
} |
| 4792 |
|
| 4793 |
return 0; |
| 4794 |
} |
| 4795 |
|
| 4796 |
static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode) |
| 4797 |
{ |
| 4798 |
struct host_command cmd = { |
| 4799 |
.host_command = SYSTEM_CONFIG, |
| 4800 |
.host_command_sequence = 0, |
| 4801 |
.host_command_length = 12, |
| 4802 |
}; |
| 4803 |
u32 ibss_mask, len = sizeof(u32); |
| 4804 |
int err; |
| 4805 |
|
| 4806 |
/* Set system configuration */ |
| 4807 |
|
| 4808 |
if (!batch_mode) { |
| 4809 |
err = ipw2100_disable_adapter(priv); |
| 4810 |
if (err) |
| 4811 |
return err; |
| 4812 |
} |
| 4813 |
|
| 4814 |
if (priv->ieee->iw_mode == IW_MODE_ADHOC) |
| 4815 |
cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START; |
| 4816 |
|
| 4817 |
cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK | |
| 4818 |
IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE; |
| 4819 |
|
| 4820 |
if (!(priv->config & CFG_LONG_PREAMBLE)) |
| 4821 |
cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO; |
| 4822 |
|
| 4823 |
err = ipw2100_get_ordinal(priv, |
| 4824 |
IPW_ORD_EEPROM_IBSS_11B_CHANNELS, |
| 4825 |
&ibss_mask, &len); |
| 4826 |
if (err) |
| 4827 |
ibss_mask = IPW_IBSS_11B_DEFAULT_MASK; |
| 4828 |
|
| 4829 |
cmd.host_command_parameters[1] = REG_CHANNEL_MASK; |
| 4830 |
cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask; |
| 4831 |
|
| 4832 |
/* 11b only */ |
| 4833 |
/*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */ |
| 4834 |
|
| 4835 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4836 |
if (err) |
| 4837 |
return err; |
| 4838 |
|
| 4839 |
/* If IPv6 is configured in the kernel then we don't want to filter out all |
| 4840 |
* of the multicast packets as IPv6 needs some. */ |
| 4841 |
#if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE) |
| 4842 |
cmd.host_command = ADD_MULTICAST; |
| 4843 |
cmd.host_command_sequence = 0; |
| 4844 |
cmd.host_command_length = 0; |
| 4845 |
|
| 4846 |
ipw2100_hw_send_command(priv, &cmd); |
| 4847 |
#endif |
| 4848 |
if (!batch_mode) { |
| 4849 |
err = ipw2100_enable_adapter(priv); |
| 4850 |
if (err) |
| 4851 |
return err; |
| 4852 |
} |
| 4853 |
|
| 4854 |
return 0; |
| 4855 |
} |
| 4856 |
|
| 4857 |
static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, |
| 4858 |
int batch_mode) |
| 4859 |
{ |
| 4860 |
struct host_command cmd = { |
| 4861 |
.host_command = BASIC_TX_RATES, |
| 4862 |
.host_command_sequence = 0, |
| 4863 |
.host_command_length = 4 |
| 4864 |
}; |
| 4865 |
int err; |
| 4866 |
|
| 4867 |
cmd.host_command_parameters[0] = rate & TX_RATE_MASK; |
| 4868 |
|
| 4869 |
if (!batch_mode) { |
| 4870 |
err = ipw2100_disable_adapter(priv); |
| 4871 |
if (err) |
| 4872 |
return err; |
| 4873 |
} |
| 4874 |
|
| 4875 |
/* Set BASIC TX Rate first */ |
| 4876 |
ipw2100_hw_send_command(priv, &cmd); |
| 4877 |
|
| 4878 |
/* Set TX Rate */ |
| 4879 |
cmd.host_command = TX_RATES; |
| 4880 |
ipw2100_hw_send_command(priv, &cmd); |
| 4881 |
|
| 4882 |
/* Set MSDU TX Rate */ |
| 4883 |
cmd.host_command = MSDU_TX_RATES; |
| 4884 |
ipw2100_hw_send_command(priv, &cmd); |
| 4885 |
|
| 4886 |
if (!batch_mode) { |
| 4887 |
err = ipw2100_enable_adapter(priv); |
| 4888 |
if (err) |
| 4889 |
return err; |
| 4890 |
} |
| 4891 |
|
| 4892 |
priv->tx_rates = rate; |
| 4893 |
|
| 4894 |
return 0; |
| 4895 |
} |
| 4896 |
|
| 4897 |
static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level) |
| 4898 |
{ |
| 4899 |
struct host_command cmd = { |
| 4900 |
.host_command = POWER_MODE, |
| 4901 |
.host_command_sequence = 0, |
| 4902 |
.host_command_length = 4 |
| 4903 |
}; |
| 4904 |
int err; |
| 4905 |
|
| 4906 |
cmd.host_command_parameters[0] = power_level; |
| 4907 |
|
| 4908 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4909 |
if (err) |
| 4910 |
return err; |
| 4911 |
|
| 4912 |
if (power_level == IPW_POWER_MODE_CAM) |
| 4913 |
priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); |
| 4914 |
else |
| 4915 |
priv->power_mode = IPW_POWER_ENABLED | power_level; |
| 4916 |
|
| 4917 |
#ifdef IPW2100_TX_POWER |
| 4918 |
if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) { |
| 4919 |
/* Set beacon interval */ |
| 4920 |
cmd.host_command = TX_POWER_INDEX; |
| 4921 |
cmd.host_command_parameters[0] = (u32) priv->adhoc_power; |
| 4922 |
|
| 4923 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4924 |
if (err) |
| 4925 |
return err; |
| 4926 |
} |
| 4927 |
#endif |
| 4928 |
|
| 4929 |
return 0; |
| 4930 |
} |
| 4931 |
|
| 4932 |
static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold) |
| 4933 |
{ |
| 4934 |
struct host_command cmd = { |
| 4935 |
.host_command = RTS_THRESHOLD, |
| 4936 |
.host_command_sequence = 0, |
| 4937 |
.host_command_length = 4 |
| 4938 |
}; |
| 4939 |
int err; |
| 4940 |
|
| 4941 |
if (threshold & RTS_DISABLED) |
| 4942 |
cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD; |
| 4943 |
else |
| 4944 |
cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED; |
| 4945 |
|
| 4946 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4947 |
if (err) |
| 4948 |
return err; |
| 4949 |
|
| 4950 |
priv->rts_threshold = threshold; |
| 4951 |
|
| 4952 |
return 0; |
| 4953 |
} |
| 4954 |
|
| 4955 |
#if 0 |
| 4956 |
int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv, |
| 4957 |
u32 threshold, int batch_mode) |
| 4958 |
{ |
| 4959 |
struct host_command cmd = { |
| 4960 |
.host_command = FRAG_THRESHOLD, |
| 4961 |
.host_command_sequence = 0, |
| 4962 |
.host_command_length = 4, |
| 4963 |
.host_command_parameters[0] = 0, |
| 4964 |
}; |
| 4965 |
int err; |
| 4966 |
|
| 4967 |
if (!batch_mode) { |
| 4968 |
err = ipw2100_disable_adapter(priv); |
| 4969 |
if (err) |
| 4970 |
return err; |
| 4971 |
} |
| 4972 |
|
| 4973 |
if (threshold == 0) |
| 4974 |
threshold = DEFAULT_FRAG_THRESHOLD; |
| 4975 |
else { |
| 4976 |
threshold = max(threshold, MIN_FRAG_THRESHOLD); |
| 4977 |
threshold = min(threshold, MAX_FRAG_THRESHOLD); |
| 4978 |
} |
| 4979 |
|
| 4980 |
cmd.host_command_parameters[0] = threshold; |
| 4981 |
|
| 4982 |
IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold); |
| 4983 |
|
| 4984 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 4985 |
|
| 4986 |
if (!batch_mode) |
| 4987 |
ipw2100_enable_adapter(priv); |
| 4988 |
|
| 4989 |
if (!err) |
| 4990 |
priv->frag_threshold = threshold; |
| 4991 |
|
| 4992 |
return err; |
| 4993 |
} |
| 4994 |
#endif |
| 4995 |
|
| 4996 |
static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry) |
| 4997 |
{ |
| 4998 |
struct host_command cmd = { |
| 4999 |
.host_command = SHORT_RETRY_LIMIT, |
| 5000 |
.host_command_sequence = 0, |
| 5001 |
.host_command_length = 4 |
| 5002 |
}; |
| 5003 |
int err; |
| 5004 |
|
| 5005 |
cmd.host_command_parameters[0] = retry; |
| 5006 |
|
| 5007 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5008 |
if (err) |
| 5009 |
return err; |
| 5010 |
|
| 5011 |
priv->short_retry_limit = retry; |
| 5012 |
|
| 5013 |
return 0; |
| 5014 |
} |
| 5015 |
|
| 5016 |
static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry) |
| 5017 |
{ |
| 5018 |
struct host_command cmd = { |
| 5019 |
.host_command = LONG_RETRY_LIMIT, |
| 5020 |
.host_command_sequence = 0, |
| 5021 |
.host_command_length = 4 |
| 5022 |
}; |
| 5023 |
int err; |
| 5024 |
|
| 5025 |
cmd.host_command_parameters[0] = retry; |
| 5026 |
|
| 5027 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5028 |
if (err) |
| 5029 |
return err; |
| 5030 |
|
| 5031 |
priv->long_retry_limit = retry; |
| 5032 |
|
| 5033 |
return 0; |
| 5034 |
} |
| 5035 |
|
| 5036 |
static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid, |
| 5037 |
int batch_mode) |
| 5038 |
{ |
| 5039 |
struct host_command cmd = { |
| 5040 |
.host_command = MANDATORY_BSSID, |
| 5041 |
.host_command_sequence = 0, |
| 5042 |
.host_command_length = (bssid == NULL) ? 0 : ETH_ALEN |
| 5043 |
}; |
| 5044 |
int err; |
| 5045 |
|
| 5046 |
#ifdef CONFIG_IPW2100_DEBUG |
| 5047 |
if (bssid != NULL) |
| 5048 |
IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid); |
| 5049 |
else |
| 5050 |
IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n"); |
| 5051 |
#endif |
| 5052 |
/* if BSSID is empty then we disable mandatory bssid mode */ |
| 5053 |
if (bssid != NULL) |
| 5054 |
memcpy(cmd.host_command_parameters, bssid, ETH_ALEN); |
| 5055 |
|
| 5056 |
if (!batch_mode) { |
| 5057 |
err = ipw2100_disable_adapter(priv); |
| 5058 |
if (err) |
| 5059 |
return err; |
| 5060 |
} |
| 5061 |
|
| 5062 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5063 |
|
| 5064 |
if (!batch_mode) |
| 5065 |
ipw2100_enable_adapter(priv); |
| 5066 |
|
| 5067 |
return err; |
| 5068 |
} |
| 5069 |
|
| 5070 |
static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv) |
| 5071 |
{ |
| 5072 |
struct host_command cmd = { |
| 5073 |
.host_command = DISASSOCIATION_BSSID, |
| 5074 |
.host_command_sequence = 0, |
| 5075 |
.host_command_length = ETH_ALEN |
| 5076 |
}; |
| 5077 |
int err; |
| 5078 |
|
| 5079 |
IPW_DEBUG_HC("DISASSOCIATION_BSSID\n"); |
| 5080 |
|
| 5081 |
/* The Firmware currently ignores the BSSID and just disassociates from |
| 5082 |
* the currently associated AP -- but in the off chance that a future |
| 5083 |
* firmware does use the BSSID provided here, we go ahead and try and |
| 5084 |
* set it to the currently associated AP's BSSID */ |
| 5085 |
memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN); |
| 5086 |
|
| 5087 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5088 |
|
| 5089 |
return err; |
| 5090 |
} |
| 5091 |
|
| 5092 |
static int ipw2100_set_wpa_ie(struct ipw2100_priv *, |
| 5093 |
struct ipw2100_wpa_assoc_frame *, int) |
| 5094 |
__attribute__ ((unused)); |
| 5095 |
|
| 5096 |
static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv, |
| 5097 |
struct ipw2100_wpa_assoc_frame *wpa_frame, |
| 5098 |
int batch_mode) |
| 5099 |
{ |
| 5100 |
struct host_command cmd = { |
| 5101 |
.host_command = SET_WPA_IE, |
| 5102 |
.host_command_sequence = 0, |
| 5103 |
.host_command_length = sizeof(struct ipw2100_wpa_assoc_frame), |
| 5104 |
}; |
| 5105 |
int err; |
| 5106 |
|
| 5107 |
IPW_DEBUG_HC("SET_WPA_IE\n"); |
| 5108 |
|
| 5109 |
if (!batch_mode) { |
| 5110 |
err = ipw2100_disable_adapter(priv); |
| 5111 |
if (err) |
| 5112 |
return err; |
| 5113 |
} |
| 5114 |
|
| 5115 |
memcpy(cmd.host_command_parameters, wpa_frame, |
| 5116 |
sizeof(struct ipw2100_wpa_assoc_frame)); |
| 5117 |
|
| 5118 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5119 |
|
| 5120 |
if (!batch_mode) { |
| 5121 |
if (ipw2100_enable_adapter(priv)) |
| 5122 |
err = -EIO; |
| 5123 |
} |
| 5124 |
|
| 5125 |
return err; |
| 5126 |
} |
| 5127 |
|
| 5128 |
struct security_info_params { |
| 5129 |
u32 allowed_ciphers; |
| 5130 |
u16 version; |
| 5131 |
u8 auth_mode; |
| 5132 |
u8 replay_counters_number; |
| 5133 |
u8 unicast_using_group; |
| 5134 |
} __packed; |
| 5135 |
|
| 5136 |
static int ipw2100_set_security_information(struct ipw2100_priv *priv, |
| 5137 |
int auth_mode, |
| 5138 |
int security_level, |
| 5139 |
int unicast_using_group, |
| 5140 |
int batch_mode) |
| 5141 |
{ |
| 5142 |
struct host_command cmd = { |
| 5143 |
.host_command = SET_SECURITY_INFORMATION, |
| 5144 |
.host_command_sequence = 0, |
| 5145 |
.host_command_length = sizeof(struct security_info_params) |
| 5146 |
}; |
| 5147 |
struct security_info_params *security = |
| 5148 |
(struct security_info_params *)&cmd.host_command_parameters; |
| 5149 |
int err; |
| 5150 |
memset(security, 0, sizeof(*security)); |
| 5151 |
|
| 5152 |
/* If shared key AP authentication is turned on, then we need to |
| 5153 |
* configure the firmware to try and use it. |
| 5154 |
* |
| 5155 |
* Actual data encryption/decryption is handled by the host. */ |
| 5156 |
security->auth_mode = auth_mode; |
| 5157 |
security->unicast_using_group = unicast_using_group; |
| 5158 |
|
| 5159 |
switch (security_level) { |
| 5160 |
default: |
| 5161 |
case SEC_LEVEL_0: |
| 5162 |
security->allowed_ciphers = IPW_NONE_CIPHER; |
| 5163 |
break; |
| 5164 |
case SEC_LEVEL_1: |
| 5165 |
security->allowed_ciphers = IPW_WEP40_CIPHER | |
| 5166 |
IPW_WEP104_CIPHER; |
| 5167 |
break; |
| 5168 |
case SEC_LEVEL_2: |
| 5169 |
security->allowed_ciphers = IPW_WEP40_CIPHER | |
| 5170 |
IPW_WEP104_CIPHER | IPW_TKIP_CIPHER; |
| 5171 |
break; |
| 5172 |
case SEC_LEVEL_2_CKIP: |
| 5173 |
security->allowed_ciphers = IPW_WEP40_CIPHER | |
| 5174 |
IPW_WEP104_CIPHER | IPW_CKIP_CIPHER; |
| 5175 |
break; |
| 5176 |
case SEC_LEVEL_3: |
| 5177 |
security->allowed_ciphers = IPW_WEP40_CIPHER | |
| 5178 |
IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER; |
| 5179 |
break; |
| 5180 |
} |
| 5181 |
|
| 5182 |
IPW_DEBUG_HC |
| 5183 |
("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n", |
| 5184 |
security->auth_mode, security->allowed_ciphers, security_level); |
| 5185 |
|
| 5186 |
security->replay_counters_number = 0; |
| 5187 |
|
| 5188 |
if (!batch_mode) { |
| 5189 |
err = ipw2100_disable_adapter(priv); |
| 5190 |
if (err) |
| 5191 |
return err; |
| 5192 |
} |
| 5193 |
|
| 5194 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5195 |
|
| 5196 |
if (!batch_mode) |
| 5197 |
ipw2100_enable_adapter(priv); |
| 5198 |
|
| 5199 |
return err; |
| 5200 |
} |
| 5201 |
|
| 5202 |
static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power) |
| 5203 |
{ |
| 5204 |
struct host_command cmd = { |
| 5205 |
.host_command = TX_POWER_INDEX, |
| 5206 |
.host_command_sequence = 0, |
| 5207 |
.host_command_length = 4 |
| 5208 |
}; |
| 5209 |
int err = 0; |
| 5210 |
u32 tmp = tx_power; |
| 5211 |
|
| 5212 |
if (tx_power != IPW_TX_POWER_DEFAULT) |
| 5213 |
tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 / |
| 5214 |
(IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM); |
| 5215 |
|
| 5216 |
cmd.host_command_parameters[0] = tmp; |
| 5217 |
|
| 5218 |
if (priv->ieee->iw_mode == IW_MODE_ADHOC) |
| 5219 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5220 |
if (!err) |
| 5221 |
priv->tx_power = tx_power; |
| 5222 |
|
| 5223 |
return 0; |
| 5224 |
} |
| 5225 |
|
| 5226 |
static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv, |
| 5227 |
u32 interval, int batch_mode) |
| 5228 |
{ |
| 5229 |
struct host_command cmd = { |
| 5230 |
.host_command = BEACON_INTERVAL, |
| 5231 |
.host_command_sequence = 0, |
| 5232 |
.host_command_length = 4 |
| 5233 |
}; |
| 5234 |
int err; |
| 5235 |
|
| 5236 |
cmd.host_command_parameters[0] = interval; |
| 5237 |
|
| 5238 |
IPW_DEBUG_INFO("enter\n"); |
| 5239 |
|
| 5240 |
if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| 5241 |
if (!batch_mode) { |
| 5242 |
err = ipw2100_disable_adapter(priv); |
| 5243 |
if (err) |
| 5244 |
return err; |
| 5245 |
} |
| 5246 |
|
| 5247 |
ipw2100_hw_send_command(priv, &cmd); |
| 5248 |
|
| 5249 |
if (!batch_mode) { |
| 5250 |
err = ipw2100_enable_adapter(priv); |
| 5251 |
if (err) |
| 5252 |
return err; |
| 5253 |
} |
| 5254 |
} |
| 5255 |
|
| 5256 |
IPW_DEBUG_INFO("exit\n"); |
| 5257 |
|
| 5258 |
return 0; |
| 5259 |
} |
| 5260 |
|
| 5261 |
static void ipw2100_queues_initialize(struct ipw2100_priv *priv) |
| 5262 |
{ |
| 5263 |
ipw2100_tx_initialize(priv); |
| 5264 |
ipw2100_rx_initialize(priv); |
| 5265 |
ipw2100_msg_initialize(priv); |
| 5266 |
} |
| 5267 |
|
| 5268 |
static void ipw2100_queues_free(struct ipw2100_priv *priv) |
| 5269 |
{ |
| 5270 |
ipw2100_tx_free(priv); |
| 5271 |
ipw2100_rx_free(priv); |
| 5272 |
ipw2100_msg_free(priv); |
| 5273 |
} |
| 5274 |
|
| 5275 |
static int ipw2100_queues_allocate(struct ipw2100_priv *priv) |
| 5276 |
{ |
| 5277 |
if (ipw2100_tx_allocate(priv) || |
| 5278 |
ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv)) |
| 5279 |
goto fail; |
| 5280 |
|
| 5281 |
return 0; |
| 5282 |
|
| 5283 |
fail: |
| 5284 |
ipw2100_tx_free(priv); |
| 5285 |
ipw2100_rx_free(priv); |
| 5286 |
ipw2100_msg_free(priv); |
| 5287 |
return -ENOMEM; |
| 5288 |
} |
| 5289 |
|
| 5290 |
#define IPW_PRIVACY_CAPABLE 0x0008 |
| 5291 |
|
| 5292 |
static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags, |
| 5293 |
int batch_mode) |
| 5294 |
{ |
| 5295 |
struct host_command cmd = { |
| 5296 |
.host_command = WEP_FLAGS, |
| 5297 |
.host_command_sequence = 0, |
| 5298 |
.host_command_length = 4 |
| 5299 |
}; |
| 5300 |
int err; |
| 5301 |
|
| 5302 |
cmd.host_command_parameters[0] = flags; |
| 5303 |
|
| 5304 |
IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags); |
| 5305 |
|
| 5306 |
if (!batch_mode) { |
| 5307 |
err = ipw2100_disable_adapter(priv); |
| 5308 |
if (err) { |
| 5309 |
printk(KERN_ERR DRV_NAME |
| 5310 |
": %s: Could not disable adapter %d\n", |
| 5311 |
priv->net_dev->name, err); |
| 5312 |
return err; |
| 5313 |
} |
| 5314 |
} |
| 5315 |
|
| 5316 |
/* send cmd to firmware */ |
| 5317 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5318 |
|
| 5319 |
if (!batch_mode) |
| 5320 |
ipw2100_enable_adapter(priv); |
| 5321 |
|
| 5322 |
return err; |
| 5323 |
} |
| 5324 |
|
| 5325 |
struct ipw2100_wep_key { |
| 5326 |
u8 idx; |
| 5327 |
u8 len; |
| 5328 |
u8 key[13]; |
| 5329 |
}; |
| 5330 |
|
| 5331 |
/* Macros to ease up priting WEP keys */ |
| 5332 |
#define WEP_FMT_64 "%02X%02X%02X%02X-%02X" |
| 5333 |
#define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X" |
| 5334 |
#define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4] |
| 5335 |
#define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10] |
| 5336 |
|
| 5337 |
/** |
| 5338 |
* ipw2100_set_key() - Set a the wep key |
| 5339 |
* |
| 5340 |
* @priv: struct to work on |
| 5341 |
* @idx: index of the key we want to set |
| 5342 |
* @key: ptr to the key data to set |
| 5343 |
* @len: length of the buffer at @key |
| 5344 |
* @batch_mode: FIXME perform the operation in batch mode, not |
| 5345 |
* disabling the device. |
| 5346 |
* |
| 5347 |
* @returns 0 if OK, < 0 errno code on error. |
| 5348 |
* |
| 5349 |
* Fill out a command structure with the new wep key, length an |
| 5350 |
* index and send it down the wire. |
| 5351 |
*/ |
| 5352 |
static int ipw2100_set_key(struct ipw2100_priv *priv, |
| 5353 |
int idx, char *key, int len, int batch_mode) |
| 5354 |
{ |
| 5355 |
int keylen = len ? (len <= 5 ? 5 : 13) : 0; |
| 5356 |
struct host_command cmd = { |
| 5357 |
.host_command = WEP_KEY_INFO, |
| 5358 |
.host_command_sequence = 0, |
| 5359 |
.host_command_length = sizeof(struct ipw2100_wep_key), |
| 5360 |
}; |
| 5361 |
struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters; |
| 5362 |
int err; |
| 5363 |
|
| 5364 |
IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n", |
| 5365 |
idx, keylen, len); |
| 5366 |
|
| 5367 |
/* NOTE: We don't check cached values in case the firmware was reset |
| 5368 |
* or some other problem is occurring. If the user is setting the key, |
| 5369 |
* then we push the change */ |
| 5370 |
|
| 5371 |
wep_key->idx = idx; |
| 5372 |
wep_key->len = keylen; |
| 5373 |
|
| 5374 |
if (keylen) { |
| 5375 |
memcpy(wep_key->key, key, len); |
| 5376 |
memset(wep_key->key + len, 0, keylen - len); |
| 5377 |
} |
| 5378 |
|
| 5379 |
/* Will be optimized out on debug not being configured in */ |
| 5380 |
if (keylen == 0) |
| 5381 |
IPW_DEBUG_WEP("%s: Clearing key %d\n", |
| 5382 |
priv->net_dev->name, wep_key->idx); |
| 5383 |
else if (keylen == 5) |
| 5384 |
IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n", |
| 5385 |
priv->net_dev->name, wep_key->idx, wep_key->len, |
| 5386 |
WEP_STR_64(wep_key->key)); |
| 5387 |
else |
| 5388 |
IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128 |
| 5389 |
"\n", |
| 5390 |
priv->net_dev->name, wep_key->idx, wep_key->len, |
| 5391 |
WEP_STR_128(wep_key->key)); |
| 5392 |
|
| 5393 |
if (!batch_mode) { |
| 5394 |
err = ipw2100_disable_adapter(priv); |
| 5395 |
/* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */ |
| 5396 |
if (err) { |
| 5397 |
printk(KERN_ERR DRV_NAME |
| 5398 |
": %s: Could not disable adapter %d\n", |
| 5399 |
priv->net_dev->name, err); |
| 5400 |
return err; |
| 5401 |
} |
| 5402 |
} |
| 5403 |
|
| 5404 |
/* send cmd to firmware */ |
| 5405 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5406 |
|
| 5407 |
if (!batch_mode) { |
| 5408 |
int err2 = ipw2100_enable_adapter(priv); |
| 5409 |
if (err == 0) |
| 5410 |
err = err2; |
| 5411 |
} |
| 5412 |
return err; |
| 5413 |
} |
| 5414 |
|
| 5415 |
static int ipw2100_set_key_index(struct ipw2100_priv *priv, |
| 5416 |
int idx, int batch_mode) |
| 5417 |
{ |
| 5418 |
struct host_command cmd = { |
| 5419 |
.host_command = WEP_KEY_INDEX, |
| 5420 |
.host_command_sequence = 0, |
| 5421 |
.host_command_length = 4, |
| 5422 |
.host_command_parameters = {idx}, |
| 5423 |
}; |
| 5424 |
int err; |
| 5425 |
|
| 5426 |
IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx); |
| 5427 |
|
| 5428 |
if (idx < 0 || idx > 3) |
| 5429 |
return -EINVAL; |
| 5430 |
|
| 5431 |
if (!batch_mode) { |
| 5432 |
err = ipw2100_disable_adapter(priv); |
| 5433 |
if (err) { |
| 5434 |
printk(KERN_ERR DRV_NAME |
| 5435 |
": %s: Could not disable adapter %d\n", |
| 5436 |
priv->net_dev->name, err); |
| 5437 |
return err; |
| 5438 |
} |
| 5439 |
} |
| 5440 |
|
| 5441 |
/* send cmd to firmware */ |
| 5442 |
err = ipw2100_hw_send_command(priv, &cmd); |
| 5443 |
|
| 5444 |
if (!batch_mode) |
| 5445 |
ipw2100_enable_adapter(priv); |
| 5446 |
|
| 5447 |
return err; |
| 5448 |
} |
| 5449 |
|
| 5450 |
static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode) |
| 5451 |
{ |
| 5452 |
int i, err, auth_mode, sec_level, use_group; |
| 5453 |
|
| 5454 |
if (!(priv->status & STATUS_RUNNING)) |
| 5455 |
return 0; |
| 5456 |
|
| 5457 |
if (!batch_mode) { |
| 5458 |
err = ipw2100_disable_adapter(priv); |
| 5459 |
if (err) |
| 5460 |
return err; |
| 5461 |
} |
| 5462 |
|
| 5463 |
if (!priv->ieee->sec.enabled) { |
| 5464 |
err = |
| 5465 |
ipw2100_set_security_information(priv, IPW_AUTH_OPEN, |
| 5466 |
SEC_LEVEL_0, 0, 1); |
| 5467 |
} else { |
| 5468 |
auth_mode = IPW_AUTH_OPEN; |
| 5469 |
if (priv->ieee->sec.flags & SEC_AUTH_MODE) { |
| 5470 |
if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY) |
| 5471 |
auth_mode = IPW_AUTH_SHARED; |
| 5472 |
else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP) |
| 5473 |
auth_mode = IPW_AUTH_LEAP_CISCO_ID; |
| 5474 |
} |
| 5475 |
|
| 5476 |
sec_level = SEC_LEVEL_0; |
| 5477 |
if (priv->ieee->sec.flags & SEC_LEVEL) |
| 5478 |
sec_level = priv->ieee->sec.level; |
| 5479 |
|
| 5480 |
use_group = 0; |
| 5481 |
if (priv->ieee->sec.flags & SEC_UNICAST_GROUP) |
| 5482 |
use_group = priv->ieee->sec.unicast_uses_group; |
| 5483 |
|
| 5484 |
err = |
| 5485 |
ipw2100_set_security_information(priv, auth_mode, sec_level, |
| 5486 |
use_group, 1); |
| 5487 |
} |
| 5488 |
|
| 5489 |
if (err) |
| 5490 |
goto exit; |
| 5491 |
|
| 5492 |
if (priv->ieee->sec.enabled) { |
| 5493 |
for (i = 0; i < 4; i++) { |
| 5494 |
if (!(priv->ieee->sec.flags & (1 << i))) { |
| 5495 |
memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN); |
| 5496 |
priv->ieee->sec.key_sizes[i] = 0; |
| 5497 |
} else { |
| 5498 |
err = ipw2100_set_key(priv, i, |
| 5499 |
priv->ieee->sec.keys[i], |
| 5500 |
priv->ieee->sec. |
| 5501 |
key_sizes[i], 1); |
| 5502 |
if (err) |
| 5503 |
goto exit; |
| 5504 |
} |
| 5505 |
} |
| 5506 |
|
| 5507 |
ipw2100_set_key_index(priv, priv->ieee->crypt_info.tx_keyidx, 1); |
| 5508 |
} |
| 5509 |
|
| 5510 |
/* Always enable privacy so the Host can filter WEP packets if |
| 5511 |
* encrypted data is sent up */ |
| 5512 |
err = |
| 5513 |
ipw2100_set_wep_flags(priv, |
| 5514 |
priv->ieee->sec. |
| 5515 |
enabled ? IPW_PRIVACY_CAPABLE : 0, 1); |
| 5516 |
if (err) |
| 5517 |
goto exit; |
| 5518 |
|
| 5519 |
priv->status &= ~STATUS_SECURITY_UPDATED; |
| 5520 |
|
| 5521 |
exit: |
| 5522 |
if (!batch_mode) |
| 5523 |
ipw2100_enable_adapter(priv); |
| 5524 |
|
| 5525 |
return err; |
| 5526 |
} |
| 5527 |
|
| 5528 |
static void ipw2100_security_work(struct work_struct *work) |
| 5529 |
{ |
| 5530 |
struct ipw2100_priv *priv = |
| 5531 |
container_of(work, struct ipw2100_priv, security_work.work); |
| 5532 |
|
| 5533 |
/* If we happen to have reconnected before we get a chance to |
| 5534 |
* process this, then update the security settings--which causes |
| 5535 |
* a disassociation to occur */ |
| 5536 |
if (!(priv->status & STATUS_ASSOCIATED) && |
| 5537 |
priv->status & STATUS_SECURITY_UPDATED) |
| 5538 |
ipw2100_configure_security(priv, 0); |
| 5539 |
} |
| 5540 |
|
| 5541 |
static void shim__set_security(struct net_device *dev, |
| 5542 |
struct libipw_security *sec) |
| 5543 |
{ |
| 5544 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 5545 |
int i; |
| 5546 |
|
| 5547 |
mutex_lock(&priv->action_mutex); |
| 5548 |
if (!(priv->status & STATUS_INITIALIZED)) |
| 5549 |
goto done; |
| 5550 |
|
| 5551 |
for (i = 0; i < 4; i++) { |
| 5552 |
if (sec->flags & (1 << i)) { |
| 5553 |
priv->ieee->sec.key_sizes[i] = sec->key_sizes[i]; |
| 5554 |
if (sec->key_sizes[i] == 0) |
| 5555 |
priv->ieee->sec.flags &= ~(1 << i); |
| 5556 |
else |
| 5557 |
memcpy(priv->ieee->sec.keys[i], sec->keys[i], |
| 5558 |
sec->key_sizes[i]); |
| 5559 |
if (sec->level == SEC_LEVEL_1) { |
| 5560 |
priv->ieee->sec.flags |= (1 << i); |
| 5561 |
priv->status |= STATUS_SECURITY_UPDATED; |
| 5562 |
} else |
| 5563 |
priv->ieee->sec.flags &= ~(1 << i); |
| 5564 |
} |
| 5565 |
} |
| 5566 |
|
| 5567 |
if ((sec->flags & SEC_ACTIVE_KEY) && |
| 5568 |
priv->ieee->sec.active_key != sec->active_key) { |
| 5569 |
priv->ieee->sec.active_key = sec->active_key; |
| 5570 |
priv->ieee->sec.flags |= SEC_ACTIVE_KEY; |
| 5571 |
priv->status |= STATUS_SECURITY_UPDATED; |
| 5572 |
} |
| 5573 |
|
| 5574 |
if ((sec->flags & SEC_AUTH_MODE) && |
| 5575 |
(priv->ieee->sec.auth_mode != sec->auth_mode)) { |
| 5576 |
priv->ieee->sec.auth_mode = sec->auth_mode; |
| 5577 |
priv->ieee->sec.flags |= SEC_AUTH_MODE; |
| 5578 |
priv->status |= STATUS_SECURITY_UPDATED; |
| 5579 |
} |
| 5580 |
|
| 5581 |
if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) { |
| 5582 |
priv->ieee->sec.flags |= SEC_ENABLED; |
| 5583 |
priv->ieee->sec.enabled = sec->enabled; |
| 5584 |
priv->status |= STATUS_SECURITY_UPDATED; |
| 5585 |
} |
| 5586 |
|
| 5587 |
if (sec->flags & SEC_ENCRYPT) |
| 5588 |
priv->ieee->sec.encrypt = sec->encrypt; |
| 5589 |
|
| 5590 |
if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) { |
| 5591 |
priv->ieee->sec.level = sec->level; |
| 5592 |
priv->ieee->sec.flags |= SEC_LEVEL; |
| 5593 |
priv->status |= STATUS_SECURITY_UPDATED; |
| 5594 |
} |
| 5595 |
|
| 5596 |
IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n", |
| 5597 |
priv->ieee->sec.flags & (1 << 8) ? '1' : '0', |
| 5598 |
priv->ieee->sec.flags & (1 << 7) ? '1' : '0', |
| 5599 |
priv->ieee->sec.flags & (1 << 6) ? '1' : '0', |
| 5600 |
priv->ieee->sec.flags & (1 << 5) ? '1' : '0', |
| 5601 |
priv->ieee->sec.flags & (1 << 4) ? '1' : '0', |
| 5602 |
priv->ieee->sec.flags & (1 << 3) ? '1' : '0', |
| 5603 |
priv->ieee->sec.flags & (1 << 2) ? '1' : '0', |
| 5604 |
priv->ieee->sec.flags & (1 << 1) ? '1' : '0', |
| 5605 |
priv->ieee->sec.flags & (1 << 0) ? '1' : '0'); |
| 5606 |
|
| 5607 |
/* As a temporary work around to enable WPA until we figure out why |
| 5608 |
* wpa_supplicant toggles the security capability of the driver, which |
| 5609 |
* forces a disassociation with force_update... |
| 5610 |
* |
| 5611 |
* if (force_update || !(priv->status & STATUS_ASSOCIATED))*/ |
| 5612 |
if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) |
| 5613 |
ipw2100_configure_security(priv, 0); |
| 5614 |
done: |
| 5615 |
mutex_unlock(&priv->action_mutex); |
| 5616 |
} |
| 5617 |
|
| 5618 |
static int ipw2100_adapter_setup(struct ipw2100_priv *priv) |
| 5619 |
{ |
| 5620 |
int err; |
| 5621 |
int batch_mode = 1; |
| 5622 |
u8 *bssid; |
| 5623 |
|
| 5624 |
IPW_DEBUG_INFO("enter\n"); |
| 5625 |
|
| 5626 |
err = ipw2100_disable_adapter(priv); |
| 5627 |
if (err) |
| 5628 |
return err; |
| 5629 |
#ifdef CONFIG_IPW2100_MONITOR |
| 5630 |
if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
| 5631 |
err = ipw2100_set_channel(priv, priv->channel, batch_mode); |
| 5632 |
if (err) |
| 5633 |
return err; |
| 5634 |
|
| 5635 |
IPW_DEBUG_INFO("exit\n"); |
| 5636 |
|
| 5637 |
return 0; |
| 5638 |
} |
| 5639 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 5640 |
|
| 5641 |
err = ipw2100_read_mac_address(priv); |
| 5642 |
if (err) |
| 5643 |
return -EIO; |
| 5644 |
|
| 5645 |
err = ipw2100_set_mac_address(priv, batch_mode); |
| 5646 |
if (err) |
| 5647 |
return err; |
| 5648 |
|
| 5649 |
err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode); |
| 5650 |
if (err) |
| 5651 |
return err; |
| 5652 |
|
| 5653 |
if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| 5654 |
err = ipw2100_set_channel(priv, priv->channel, batch_mode); |
| 5655 |
if (err) |
| 5656 |
return err; |
| 5657 |
} |
| 5658 |
|
| 5659 |
err = ipw2100_system_config(priv, batch_mode); |
| 5660 |
if (err) |
| 5661 |
return err; |
| 5662 |
|
| 5663 |
err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode); |
| 5664 |
if (err) |
| 5665 |
return err; |
| 5666 |
|
| 5667 |
/* Default to power mode OFF */ |
| 5668 |
err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); |
| 5669 |
if (err) |
| 5670 |
return err; |
| 5671 |
|
| 5672 |
err = ipw2100_set_rts_threshold(priv, priv->rts_threshold); |
| 5673 |
if (err) |
| 5674 |
return err; |
| 5675 |
|
| 5676 |
if (priv->config & CFG_STATIC_BSSID) |
| 5677 |
bssid = priv->bssid; |
| 5678 |
else |
| 5679 |
bssid = NULL; |
| 5680 |
err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode); |
| 5681 |
if (err) |
| 5682 |
return err; |
| 5683 |
|
| 5684 |
if (priv->config & CFG_STATIC_ESSID) |
| 5685 |
err = ipw2100_set_essid(priv, priv->essid, priv->essid_len, |
| 5686 |
batch_mode); |
| 5687 |
else |
| 5688 |
err = ipw2100_set_essid(priv, NULL, 0, batch_mode); |
| 5689 |
if (err) |
| 5690 |
return err; |
| 5691 |
|
| 5692 |
err = ipw2100_configure_security(priv, batch_mode); |
| 5693 |
if (err) |
| 5694 |
return err; |
| 5695 |
|
| 5696 |
if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| 5697 |
err = |
| 5698 |
ipw2100_set_ibss_beacon_interval(priv, |
| 5699 |
priv->beacon_interval, |
| 5700 |
batch_mode); |
| 5701 |
if (err) |
| 5702 |
return err; |
| 5703 |
|
| 5704 |
err = ipw2100_set_tx_power(priv, priv->tx_power); |
| 5705 |
if (err) |
| 5706 |
return err; |
| 5707 |
} |
| 5708 |
|
| 5709 |
/* |
| 5710 |
err = ipw2100_set_fragmentation_threshold( |
| 5711 |
priv, priv->frag_threshold, batch_mode); |
| 5712 |
if (err) |
| 5713 |
return err; |
| 5714 |
*/ |
| 5715 |
|
| 5716 |
IPW_DEBUG_INFO("exit\n"); |
| 5717 |
|
| 5718 |
return 0; |
| 5719 |
} |
| 5720 |
|
| 5721 |
/************************************************************************* |
| 5722 |
* |
| 5723 |
* EXTERNALLY CALLED METHODS |
| 5724 |
* |
| 5725 |
*************************************************************************/ |
| 5726 |
|
| 5727 |
/* This method is called by the network layer -- not to be confused with |
| 5728 |
* ipw2100_set_mac_address() declared above called by this driver (and this |
| 5729 |
* method as well) to talk to the firmware */ |
| 5730 |
static int ipw2100_set_address(struct net_device *dev, void *p) |
| 5731 |
{ |
| 5732 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 5733 |
struct sockaddr *addr = p; |
| 5734 |
int err = 0; |
| 5735 |
|
| 5736 |
if (!is_valid_ether_addr(addr->sa_data)) |
| 5737 |
return -EADDRNOTAVAIL; |
| 5738 |
|
| 5739 |
mutex_lock(&priv->action_mutex); |
| 5740 |
|
| 5741 |
priv->config |= CFG_CUSTOM_MAC; |
| 5742 |
memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN); |
| 5743 |
|
| 5744 |
err = ipw2100_set_mac_address(priv, 0); |
| 5745 |
if (err) |
| 5746 |
goto done; |
| 5747 |
|
| 5748 |
priv->reset_backoff = 0; |
| 5749 |
mutex_unlock(&priv->action_mutex); |
| 5750 |
ipw2100_reset_adapter(&priv->reset_work.work); |
| 5751 |
return 0; |
| 5752 |
|
| 5753 |
done: |
| 5754 |
mutex_unlock(&priv->action_mutex); |
| 5755 |
return err; |
| 5756 |
} |
| 5757 |
|
| 5758 |
static int ipw2100_open(struct net_device *dev) |
| 5759 |
{ |
| 5760 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 5761 |
unsigned long flags; |
| 5762 |
IPW_DEBUG_INFO("dev->open\n"); |
| 5763 |
|
| 5764 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 5765 |
if (priv->status & STATUS_ASSOCIATED) { |
| 5766 |
netif_carrier_on(dev); |
| 5767 |
netif_start_queue(dev); |
| 5768 |
} |
| 5769 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 5770 |
|
| 5771 |
return 0; |
| 5772 |
} |
| 5773 |
|
| 5774 |
static int ipw2100_close(struct net_device *dev) |
| 5775 |
{ |
| 5776 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 5777 |
unsigned long flags; |
| 5778 |
struct list_head *element; |
| 5779 |
struct ipw2100_tx_packet *packet; |
| 5780 |
|
| 5781 |
IPW_DEBUG_INFO("enter\n"); |
| 5782 |
|
| 5783 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 5784 |
|
| 5785 |
if (priv->status & STATUS_ASSOCIATED) |
| 5786 |
netif_carrier_off(dev); |
| 5787 |
netif_stop_queue(dev); |
| 5788 |
|
| 5789 |
/* Flush the TX queue ... */ |
| 5790 |
while (!list_empty(&priv->tx_pend_list)) { |
| 5791 |
element = priv->tx_pend_list.next; |
| 5792 |
packet = list_entry(element, struct ipw2100_tx_packet, list); |
| 5793 |
|
| 5794 |
list_del(element); |
| 5795 |
DEC_STAT(&priv->tx_pend_stat); |
| 5796 |
|
| 5797 |
libipw_txb_free(packet->info.d_struct.txb); |
| 5798 |
packet->info.d_struct.txb = NULL; |
| 5799 |
|
| 5800 |
list_add_tail(element, &priv->tx_free_list); |
| 5801 |
INC_STAT(&priv->tx_free_stat); |
| 5802 |
} |
| 5803 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 5804 |
|
| 5805 |
IPW_DEBUG_INFO("exit\n"); |
| 5806 |
|
| 5807 |
return 0; |
| 5808 |
} |
| 5809 |
|
| 5810 |
/* |
| 5811 |
* TODO: Fix this function... its just wrong |
| 5812 |
*/ |
| 5813 |
static void ipw2100_tx_timeout(struct net_device *dev, unsigned int txqueue) |
| 5814 |
{ |
| 5815 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 5816 |
|
| 5817 |
dev->stats.tx_errors++; |
| 5818 |
|
| 5819 |
#ifdef CONFIG_IPW2100_MONITOR |
| 5820 |
if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
| 5821 |
return; |
| 5822 |
#endif |
| 5823 |
|
| 5824 |
IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n", |
| 5825 |
dev->name); |
| 5826 |
schedule_reset(priv); |
| 5827 |
} |
| 5828 |
|
| 5829 |
static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value) |
| 5830 |
{ |
| 5831 |
/* This is called when wpa_supplicant loads and closes the driver |
| 5832 |
* interface. */ |
| 5833 |
priv->ieee->wpa_enabled = value; |
| 5834 |
return 0; |
| 5835 |
} |
| 5836 |
|
| 5837 |
static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value) |
| 5838 |
{ |
| 5839 |
|
| 5840 |
struct libipw_device *ieee = priv->ieee; |
| 5841 |
struct libipw_security sec = { |
| 5842 |
.flags = SEC_AUTH_MODE, |
| 5843 |
}; |
| 5844 |
int ret = 0; |
| 5845 |
|
| 5846 |
if (value & IW_AUTH_ALG_SHARED_KEY) { |
| 5847 |
sec.auth_mode = WLAN_AUTH_SHARED_KEY; |
| 5848 |
ieee->open_wep = 0; |
| 5849 |
} else if (value & IW_AUTH_ALG_OPEN_SYSTEM) { |
| 5850 |
sec.auth_mode = WLAN_AUTH_OPEN; |
| 5851 |
ieee->open_wep = 1; |
| 5852 |
} else if (value & IW_AUTH_ALG_LEAP) { |
| 5853 |
sec.auth_mode = WLAN_AUTH_LEAP; |
| 5854 |
ieee->open_wep = 1; |
| 5855 |
} else |
| 5856 |
return -EINVAL; |
| 5857 |
|
| 5858 |
if (ieee->set_security) |
| 5859 |
ieee->set_security(ieee->dev, &sec); |
| 5860 |
else |
| 5861 |
ret = -EOPNOTSUPP; |
| 5862 |
|
| 5863 |
return ret; |
| 5864 |
} |
| 5865 |
|
| 5866 |
static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv, |
| 5867 |
char *wpa_ie, int wpa_ie_len) |
| 5868 |
{ |
| 5869 |
|
| 5870 |
struct ipw2100_wpa_assoc_frame frame; |
| 5871 |
|
| 5872 |
frame.fixed_ie_mask = 0; |
| 5873 |
|
| 5874 |
/* copy WPA IE */ |
| 5875 |
memcpy(frame.var_ie, wpa_ie, wpa_ie_len); |
| 5876 |
frame.var_ie_len = wpa_ie_len; |
| 5877 |
|
| 5878 |
/* make sure WPA is enabled */ |
| 5879 |
ipw2100_wpa_enable(priv, 1); |
| 5880 |
ipw2100_set_wpa_ie(priv, &frame, 0); |
| 5881 |
} |
| 5882 |
|
| 5883 |
static void ipw_ethtool_get_drvinfo(struct net_device *dev, |
| 5884 |
struct ethtool_drvinfo *info) |
| 5885 |
{ |
| 5886 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 5887 |
char fw_ver[64]; |
| 5888 |
|
| 5889 |
strscpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| 5890 |
strscpy(info->version, DRV_VERSION, sizeof(info->version)); |
| 5891 |
|
| 5892 |
ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver)); |
| 5893 |
|
| 5894 |
strscpy(info->fw_version, fw_ver, sizeof(info->fw_version)); |
| 5895 |
strscpy(info->bus_info, pci_name(priv->pci_dev), |
| 5896 |
sizeof(info->bus_info)); |
| 5897 |
} |
| 5898 |
|
| 5899 |
static u32 ipw2100_ethtool_get_link(struct net_device *dev) |
| 5900 |
{ |
| 5901 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 5902 |
return (priv->status & STATUS_ASSOCIATED) ? 1 : 0; |
| 5903 |
} |
| 5904 |
|
| 5905 |
static const struct ethtool_ops ipw2100_ethtool_ops = { |
| 5906 |
.get_link = ipw2100_ethtool_get_link, |
| 5907 |
.get_drvinfo = ipw_ethtool_get_drvinfo, |
| 5908 |
}; |
| 5909 |
|
| 5910 |
static void ipw2100_hang_check(struct work_struct *work) |
| 5911 |
{ |
| 5912 |
struct ipw2100_priv *priv = |
| 5913 |
container_of(work, struct ipw2100_priv, hang_check.work); |
| 5914 |
unsigned long flags; |
| 5915 |
u32 rtc = 0xa5a5a5a5; |
| 5916 |
u32 len = sizeof(rtc); |
| 5917 |
int restart = 0; |
| 5918 |
|
| 5919 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 5920 |
|
| 5921 |
if (priv->fatal_error != 0) { |
| 5922 |
/* If fatal_error is set then we need to restart */ |
| 5923 |
IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n", |
| 5924 |
priv->net_dev->name); |
| 5925 |
|
| 5926 |
restart = 1; |
| 5927 |
} else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) || |
| 5928 |
(rtc == priv->last_rtc)) { |
| 5929 |
/* Check if firmware is hung */ |
| 5930 |
IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n", |
| 5931 |
priv->net_dev->name); |
| 5932 |
|
| 5933 |
restart = 1; |
| 5934 |
} |
| 5935 |
|
| 5936 |
if (restart) { |
| 5937 |
/* Kill timer */ |
| 5938 |
priv->stop_hang_check = 1; |
| 5939 |
priv->hangs++; |
| 5940 |
|
| 5941 |
/* Restart the NIC */ |
| 5942 |
schedule_reset(priv); |
| 5943 |
} |
| 5944 |
|
| 5945 |
priv->last_rtc = rtc; |
| 5946 |
|
| 5947 |
if (!priv->stop_hang_check) |
| 5948 |
schedule_delayed_work(&priv->hang_check, HZ / 2); |
| 5949 |
|
| 5950 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 5951 |
} |
| 5952 |
|
| 5953 |
static void ipw2100_rf_kill(struct work_struct *work) |
| 5954 |
{ |
| 5955 |
struct ipw2100_priv *priv = |
| 5956 |
container_of(work, struct ipw2100_priv, rf_kill.work); |
| 5957 |
unsigned long flags; |
| 5958 |
|
| 5959 |
spin_lock_irqsave(&priv->low_lock, flags); |
| 5960 |
|
| 5961 |
if (rf_kill_active(priv)) { |
| 5962 |
IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n"); |
| 5963 |
if (!priv->stop_rf_kill) |
| 5964 |
schedule_delayed_work(&priv->rf_kill, |
| 5965 |
round_jiffies_relative(HZ)); |
| 5966 |
goto exit_unlock; |
| 5967 |
} |
| 5968 |
|
| 5969 |
/* RF Kill is now disabled, so bring the device back up */ |
| 5970 |
|
| 5971 |
if (!(priv->status & STATUS_RF_KILL_MASK)) { |
| 5972 |
IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting " |
| 5973 |
"device\n"); |
| 5974 |
schedule_reset(priv); |
| 5975 |
} else |
| 5976 |
IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still " |
| 5977 |
"enabled\n"); |
| 5978 |
|
| 5979 |
exit_unlock: |
| 5980 |
spin_unlock_irqrestore(&priv->low_lock, flags); |
| 5981 |
} |
| 5982 |
|
| 5983 |
static void ipw2100_irq_tasklet(struct tasklet_struct *t); |
| 5984 |
|
| 5985 |
static const struct net_device_ops ipw2100_netdev_ops = { |
| 5986 |
.ndo_open = ipw2100_open, |
| 5987 |
.ndo_stop = ipw2100_close, |
| 5988 |
.ndo_start_xmit = libipw_xmit, |
| 5989 |
.ndo_tx_timeout = ipw2100_tx_timeout, |
| 5990 |
.ndo_set_mac_address = ipw2100_set_address, |
| 5991 |
.ndo_validate_addr = eth_validate_addr, |
| 5992 |
}; |
| 5993 |
|
| 5994 |
/* Look into using netdev destructor to shutdown libipw? */ |
| 5995 |
|
| 5996 |
static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, |
| 5997 |
void __iomem * ioaddr) |
| 5998 |
{ |
| 5999 |
struct ipw2100_priv *priv; |
| 6000 |
struct net_device *dev; |
| 6001 |
|
| 6002 |
dev = alloc_libipw(sizeof(struct ipw2100_priv), 0); |
| 6003 |
if (!dev) |
| 6004 |
return NULL; |
| 6005 |
priv = libipw_priv(dev); |
| 6006 |
priv->ieee = netdev_priv(dev); |
| 6007 |
priv->pci_dev = pci_dev; |
| 6008 |
priv->net_dev = dev; |
| 6009 |
priv->ioaddr = ioaddr; |
| 6010 |
|
| 6011 |
priv->ieee->hard_start_xmit = ipw2100_tx; |
| 6012 |
priv->ieee->set_security = shim__set_security; |
| 6013 |
|
| 6014 |
priv->ieee->perfect_rssi = -20; |
| 6015 |
priv->ieee->worst_rssi = -85; |
| 6016 |
|
| 6017 |
dev->netdev_ops = &ipw2100_netdev_ops; |
| 6018 |
dev->ethtool_ops = &ipw2100_ethtool_ops; |
| 6019 |
dev->wireless_handlers = &ipw2100_wx_handler_def; |
| 6020 |
dev->watchdog_timeo = 3 * HZ; |
| 6021 |
dev->irq = 0; |
| 6022 |
dev->min_mtu = 68; |
| 6023 |
dev->max_mtu = LIBIPW_DATA_LEN; |
| 6024 |
|
| 6025 |
/* NOTE: We don't use the wireless_handlers hook |
| 6026 |
* in dev as the system will start throwing WX requests |
| 6027 |
* to us before we're actually initialized and it just |
| 6028 |
* ends up causing problems. So, we just handle |
| 6029 |
* the WX extensions through the ipw2100_ioctl interface */ |
| 6030 |
|
| 6031 |
/* memset() puts everything to 0, so we only have explicitly set |
| 6032 |
* those values that need to be something else */ |
| 6033 |
|
| 6034 |
/* If power management is turned on, default to AUTO mode */ |
| 6035 |
priv->power_mode = IPW_POWER_AUTO; |
| 6036 |
|
| 6037 |
#ifdef CONFIG_IPW2100_MONITOR |
| 6038 |
priv->config |= CFG_CRC_CHECK; |
| 6039 |
#endif |
| 6040 |
priv->ieee->wpa_enabled = 0; |
| 6041 |
priv->ieee->drop_unencrypted = 0; |
| 6042 |
priv->ieee->privacy_invoked = 0; |
| 6043 |
priv->ieee->ieee802_1x = 1; |
| 6044 |
|
| 6045 |
/* Set module parameters */ |
| 6046 |
switch (network_mode) { |
| 6047 |
case 1: |
| 6048 |
priv->ieee->iw_mode = IW_MODE_ADHOC; |
| 6049 |
break; |
| 6050 |
#ifdef CONFIG_IPW2100_MONITOR |
| 6051 |
case 2: |
| 6052 |
priv->ieee->iw_mode = IW_MODE_MONITOR; |
| 6053 |
break; |
| 6054 |
#endif |
| 6055 |
default: |
| 6056 |
case 0: |
| 6057 |
priv->ieee->iw_mode = IW_MODE_INFRA; |
| 6058 |
break; |
| 6059 |
} |
| 6060 |
|
| 6061 |
if (disable == 1) |
| 6062 |
priv->status |= STATUS_RF_KILL_SW; |
| 6063 |
|
| 6064 |
if (channel != 0 && |
| 6065 |
((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) { |
| 6066 |
priv->config |= CFG_STATIC_CHANNEL; |
| 6067 |
priv->channel = channel; |
| 6068 |
} |
| 6069 |
|
| 6070 |
if (associate) |
| 6071 |
priv->config |= CFG_ASSOCIATE; |
| 6072 |
|
| 6073 |
priv->beacon_interval = DEFAULT_BEACON_INTERVAL; |
| 6074 |
priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT; |
| 6075 |
priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT; |
| 6076 |
priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED; |
| 6077 |
priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED; |
| 6078 |
priv->tx_power = IPW_TX_POWER_DEFAULT; |
| 6079 |
priv->tx_rates = DEFAULT_TX_RATES; |
| 6080 |
|
| 6081 |
strcpy(priv->nick, "ipw2100"); |
| 6082 |
|
| 6083 |
spin_lock_init(&priv->low_lock); |
| 6084 |
mutex_init(&priv->action_mutex); |
| 6085 |
mutex_init(&priv->adapter_mutex); |
| 6086 |
|
| 6087 |
init_waitqueue_head(&priv->wait_command_queue); |
| 6088 |
|
| 6089 |
netif_carrier_off(dev); |
| 6090 |
|
| 6091 |
INIT_LIST_HEAD(&priv->msg_free_list); |
| 6092 |
INIT_LIST_HEAD(&priv->msg_pend_list); |
| 6093 |
INIT_STAT(&priv->msg_free_stat); |
| 6094 |
INIT_STAT(&priv->msg_pend_stat); |
| 6095 |
|
| 6096 |
INIT_LIST_HEAD(&priv->tx_free_list); |
| 6097 |
INIT_LIST_HEAD(&priv->tx_pend_list); |
| 6098 |
INIT_STAT(&priv->tx_free_stat); |
| 6099 |
INIT_STAT(&priv->tx_pend_stat); |
| 6100 |
|
| 6101 |
INIT_LIST_HEAD(&priv->fw_pend_list); |
| 6102 |
INIT_STAT(&priv->fw_pend_stat); |
| 6103 |
|
| 6104 |
INIT_DELAYED_WORK(&priv->reset_work, ipw2100_reset_adapter); |
| 6105 |
INIT_DELAYED_WORK(&priv->security_work, ipw2100_security_work); |
| 6106 |
INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work); |
| 6107 |
INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check); |
| 6108 |
INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill); |
| 6109 |
INIT_DELAYED_WORK(&priv->scan_event, ipw2100_scan_event); |
| 6110 |
|
| 6111 |
tasklet_setup(&priv->irq_tasklet, ipw2100_irq_tasklet); |
| 6112 |
|
| 6113 |
/* NOTE: We do not start the deferred work for status checks yet */ |
| 6114 |
priv->stop_rf_kill = 1; |
| 6115 |
priv->stop_hang_check = 1; |
| 6116 |
|
| 6117 |
return dev; |
| 6118 |
} |
| 6119 |
|
| 6120 |
static int ipw2100_pci_init_one(struct pci_dev *pci_dev, |
| 6121 |
const struct pci_device_id *ent) |
| 6122 |
{ |
| 6123 |
void __iomem *ioaddr; |
| 6124 |
struct net_device *dev = NULL; |
| 6125 |
struct ipw2100_priv *priv = NULL; |
| 6126 |
int err = 0; |
| 6127 |
int registered = 0; |
| 6128 |
u32 val; |
| 6129 |
|
| 6130 |
IPW_DEBUG_INFO("enter\n"); |
| 6131 |
|
| 6132 |
if (!(pci_resource_flags(pci_dev, 0) & IORESOURCE_MEM)) { |
| 6133 |
IPW_DEBUG_INFO("weird - resource type is not memory\n"); |
| 6134 |
err = -ENODEV; |
| 6135 |
goto out; |
| 6136 |
} |
| 6137 |
|
| 6138 |
ioaddr = pci_iomap(pci_dev, 0, 0); |
| 6139 |
if (!ioaddr) { |
| 6140 |
printk(KERN_WARNING DRV_NAME |
| 6141 |
"Error calling ioremap.\n"); |
| 6142 |
err = -EIO; |
| 6143 |
goto fail; |
| 6144 |
} |
| 6145 |
|
| 6146 |
/* allocate and initialize our net_device */ |
| 6147 |
dev = ipw2100_alloc_device(pci_dev, ioaddr); |
| 6148 |
if (!dev) { |
| 6149 |
printk(KERN_WARNING DRV_NAME |
| 6150 |
"Error calling ipw2100_alloc_device.\n"); |
| 6151 |
err = -ENOMEM; |
| 6152 |
goto fail; |
| 6153 |
} |
| 6154 |
|
| 6155 |
/* set up PCI mappings for device */ |
| 6156 |
err = pci_enable_device(pci_dev); |
| 6157 |
if (err) { |
| 6158 |
printk(KERN_WARNING DRV_NAME |
| 6159 |
"Error calling pci_enable_device.\n"); |
| 6160 |
return err; |
| 6161 |
} |
| 6162 |
|
| 6163 |
priv = libipw_priv(dev); |
| 6164 |
|
| 6165 |
pci_set_master(pci_dev); |
| 6166 |
pci_set_drvdata(pci_dev, priv); |
| 6167 |
|
| 6168 |
err = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32)); |
| 6169 |
if (err) { |
| 6170 |
printk(KERN_WARNING DRV_NAME |
| 6171 |
"Error calling pci_set_dma_mask.\n"); |
| 6172 |
pci_disable_device(pci_dev); |
| 6173 |
return err; |
| 6174 |
} |
| 6175 |
|
| 6176 |
err = pci_request_regions(pci_dev, DRV_NAME); |
| 6177 |
if (err) { |
| 6178 |
printk(KERN_WARNING DRV_NAME |
| 6179 |
"Error calling pci_request_regions.\n"); |
| 6180 |
pci_disable_device(pci_dev); |
| 6181 |
return err; |
| 6182 |
} |
| 6183 |
|
| 6184 |
/* We disable the RETRY_TIMEOUT register (0x41) to keep |
| 6185 |
* PCI Tx retries from interfering with C3 CPU state */ |
| 6186 |
pci_read_config_dword(pci_dev, 0x40, &val); |
| 6187 |
if ((val & 0x0000ff00) != 0) |
| 6188 |
pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); |
| 6189 |
|
| 6190 |
if (!ipw2100_hw_is_adapter_in_system(dev)) { |
| 6191 |
printk(KERN_WARNING DRV_NAME |
| 6192 |
"Device not found via register read.\n"); |
| 6193 |
err = -ENODEV; |
| 6194 |
goto fail; |
| 6195 |
} |
| 6196 |
|
| 6197 |
SET_NETDEV_DEV(dev, &pci_dev->dev); |
| 6198 |
|
| 6199 |
/* Force interrupts to be shut off on the device */ |
| 6200 |
priv->status |= STATUS_INT_ENABLED; |
| 6201 |
ipw2100_disable_interrupts(priv); |
| 6202 |
|
| 6203 |
/* Allocate and initialize the Tx/Rx queues and lists */ |
| 6204 |
if (ipw2100_queues_allocate(priv)) { |
| 6205 |
printk(KERN_WARNING DRV_NAME |
| 6206 |
"Error calling ipw2100_queues_allocate.\n"); |
| 6207 |
err = -ENOMEM; |
| 6208 |
goto fail; |
| 6209 |
} |
| 6210 |
ipw2100_queues_initialize(priv); |
| 6211 |
|
| 6212 |
err = request_irq(pci_dev->irq, |
| 6213 |
ipw2100_interrupt, IRQF_SHARED, dev->name, priv); |
| 6214 |
if (err) { |
| 6215 |
printk(KERN_WARNING DRV_NAME |
| 6216 |
"Error calling request_irq: %d.\n", pci_dev->irq); |
| 6217 |
goto fail; |
| 6218 |
} |
| 6219 |
dev->irq = pci_dev->irq; |
| 6220 |
|
| 6221 |
IPW_DEBUG_INFO("Attempting to register device...\n"); |
| 6222 |
|
| 6223 |
printk(KERN_INFO DRV_NAME |
| 6224 |
": Detected Intel PRO/Wireless 2100 Network Connection\n"); |
| 6225 |
|
| 6226 |
err = ipw2100_up(priv, 1); |
| 6227 |
if (err) |
| 6228 |
goto fail; |
| 6229 |
|
| 6230 |
err = ipw2100_wdev_init(dev); |
| 6231 |
if (err) |
| 6232 |
goto fail; |
| 6233 |
registered = 1; |
| 6234 |
|
| 6235 |
/* Bring up the interface. Pre 0.46, after we registered the |
| 6236 |
* network device we would call ipw2100_up. This introduced a race |
| 6237 |
* condition with newer hotplug configurations (network was coming |
| 6238 |
* up and making calls before the device was initialized). |
| 6239 |
*/ |
| 6240 |
err = register_netdev(dev); |
| 6241 |
if (err) { |
| 6242 |
printk(KERN_WARNING DRV_NAME |
| 6243 |
"Error calling register_netdev.\n"); |
| 6244 |
goto fail; |
| 6245 |
} |
| 6246 |
registered = 2; |
| 6247 |
|
| 6248 |
mutex_lock(&priv->action_mutex); |
| 6249 |
|
| 6250 |
IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev)); |
| 6251 |
|
| 6252 |
/* perform this after register_netdev so that dev->name is set */ |
| 6253 |
err = sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); |
| 6254 |
if (err) |
| 6255 |
goto fail_unlock; |
| 6256 |
|
| 6257 |
/* If the RF Kill switch is disabled, go ahead and complete the |
| 6258 |
* startup sequence */ |
| 6259 |
if (!(priv->status & STATUS_RF_KILL_MASK)) { |
| 6260 |
/* Enable the adapter - sends HOST_COMPLETE */ |
| 6261 |
if (ipw2100_enable_adapter(priv)) { |
| 6262 |
printk(KERN_WARNING DRV_NAME |
| 6263 |
": %s: failed in call to enable adapter.\n", |
| 6264 |
priv->net_dev->name); |
| 6265 |
ipw2100_hw_stop_adapter(priv); |
| 6266 |
err = -EIO; |
| 6267 |
goto fail_unlock; |
| 6268 |
} |
| 6269 |
|
| 6270 |
/* Start a scan . . . */ |
| 6271 |
ipw2100_set_scan_options(priv); |
| 6272 |
ipw2100_start_scan(priv); |
| 6273 |
} |
| 6274 |
|
| 6275 |
IPW_DEBUG_INFO("exit\n"); |
| 6276 |
|
| 6277 |
priv->status |= STATUS_INITIALIZED; |
| 6278 |
|
| 6279 |
mutex_unlock(&priv->action_mutex); |
| 6280 |
out: |
| 6281 |
return err; |
| 6282 |
|
| 6283 |
fail_unlock: |
| 6284 |
mutex_unlock(&priv->action_mutex); |
| 6285 |
fail: |
| 6286 |
if (dev) { |
| 6287 |
if (registered >= 2) |
| 6288 |
unregister_netdev(dev); |
| 6289 |
|
| 6290 |
if (registered) { |
| 6291 |
wiphy_unregister(priv->ieee->wdev.wiphy); |
| 6292 |
kfree(priv->ieee->bg_band.channels); |
| 6293 |
} |
| 6294 |
|
| 6295 |
ipw2100_hw_stop_adapter(priv); |
| 6296 |
|
| 6297 |
ipw2100_disable_interrupts(priv); |
| 6298 |
|
| 6299 |
if (dev->irq) |
| 6300 |
free_irq(dev->irq, priv); |
| 6301 |
|
| 6302 |
ipw2100_kill_works(priv); |
| 6303 |
|
| 6304 |
/* These are safe to call even if they weren't allocated */ |
| 6305 |
ipw2100_queues_free(priv); |
| 6306 |
sysfs_remove_group(&pci_dev->dev.kobj, |
| 6307 |
&ipw2100_attribute_group); |
| 6308 |
|
| 6309 |
free_libipw(dev, 0); |
| 6310 |
} |
| 6311 |
|
| 6312 |
pci_iounmap(pci_dev, ioaddr); |
| 6313 |
|
| 6314 |
pci_release_regions(pci_dev); |
| 6315 |
pci_disable_device(pci_dev); |
| 6316 |
goto out; |
| 6317 |
} |
| 6318 |
|
| 6319 |
static void ipw2100_pci_remove_one(struct pci_dev *pci_dev) |
| 6320 |
{ |
| 6321 |
struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); |
| 6322 |
struct net_device *dev = priv->net_dev; |
| 6323 |
|
| 6324 |
mutex_lock(&priv->action_mutex); |
| 6325 |
|
| 6326 |
priv->status &= ~STATUS_INITIALIZED; |
| 6327 |
|
| 6328 |
sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); |
| 6329 |
|
| 6330 |
#ifdef CONFIG_PM |
| 6331 |
if (ipw2100_firmware.version) |
| 6332 |
ipw2100_release_firmware(priv, &ipw2100_firmware); |
| 6333 |
#endif |
| 6334 |
/* Take down the hardware */ |
| 6335 |
ipw2100_down(priv); |
| 6336 |
|
| 6337 |
/* Release the mutex so that the network subsystem can |
| 6338 |
* complete any needed calls into the driver... */ |
| 6339 |
mutex_unlock(&priv->action_mutex); |
| 6340 |
|
| 6341 |
/* Unregister the device first - this results in close() |
| 6342 |
* being called if the device is open. If we free storage |
| 6343 |
* first, then close() will crash. |
| 6344 |
* FIXME: remove the comment above. */ |
| 6345 |
unregister_netdev(dev); |
| 6346 |
|
| 6347 |
ipw2100_kill_works(priv); |
| 6348 |
|
| 6349 |
ipw2100_queues_free(priv); |
| 6350 |
|
| 6351 |
/* Free potential debugging firmware snapshot */ |
| 6352 |
ipw2100_snapshot_free(priv); |
| 6353 |
|
| 6354 |
free_irq(dev->irq, priv); |
| 6355 |
|
| 6356 |
pci_iounmap(pci_dev, priv->ioaddr); |
| 6357 |
|
| 6358 |
/* wiphy_unregister needs to be here, before free_libipw */ |
| 6359 |
wiphy_unregister(priv->ieee->wdev.wiphy); |
| 6360 |
kfree(priv->ieee->bg_band.channels); |
| 6361 |
free_libipw(dev, 0); |
| 6362 |
|
| 6363 |
pci_release_regions(pci_dev); |
| 6364 |
pci_disable_device(pci_dev); |
| 6365 |
|
| 6366 |
IPW_DEBUG_INFO("exit\n"); |
| 6367 |
} |
| 6368 |
|
| 6369 |
static int __maybe_unused ipw2100_suspend(struct device *dev_d) |
| 6370 |
{ |
| 6371 |
struct ipw2100_priv *priv = dev_get_drvdata(dev_d); |
| 6372 |
struct net_device *dev = priv->net_dev; |
| 6373 |
|
| 6374 |
IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name); |
| 6375 |
|
| 6376 |
mutex_lock(&priv->action_mutex); |
| 6377 |
if (priv->status & STATUS_INITIALIZED) { |
| 6378 |
/* Take down the device; powers it off, etc. */ |
| 6379 |
ipw2100_down(priv); |
| 6380 |
} |
| 6381 |
|
| 6382 |
/* Remove the PRESENT state of the device */ |
| 6383 |
netif_device_detach(dev); |
| 6384 |
|
| 6385 |
priv->suspend_at = ktime_get_boottime_seconds(); |
| 6386 |
|
| 6387 |
mutex_unlock(&priv->action_mutex); |
| 6388 |
|
| 6389 |
return 0; |
| 6390 |
} |
| 6391 |
|
| 6392 |
static int __maybe_unused ipw2100_resume(struct device *dev_d) |
| 6393 |
{ |
| 6394 |
struct pci_dev *pci_dev = to_pci_dev(dev_d); |
| 6395 |
struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); |
| 6396 |
struct net_device *dev = priv->net_dev; |
| 6397 |
u32 val; |
| 6398 |
|
| 6399 |
if (IPW2100_PM_DISABLED) |
| 6400 |
return 0; |
| 6401 |
|
| 6402 |
mutex_lock(&priv->action_mutex); |
| 6403 |
|
| 6404 |
IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name); |
| 6405 |
|
| 6406 |
/* |
| 6407 |
* Suspend/Resume resets the PCI configuration space, so we have to |
| 6408 |
* re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries |
| 6409 |
* from interfering with C3 CPU state. pci_restore_state won't help |
| 6410 |
* here since it only restores the first 64 bytes pci config header. |
| 6411 |
*/ |
| 6412 |
pci_read_config_dword(pci_dev, 0x40, &val); |
| 6413 |
if ((val & 0x0000ff00) != 0) |
| 6414 |
pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); |
| 6415 |
|
| 6416 |
/* Set the device back into the PRESENT state; this will also wake |
| 6417 |
* the queue of needed */ |
| 6418 |
netif_device_attach(dev); |
| 6419 |
|
| 6420 |
priv->suspend_time = ktime_get_boottime_seconds() - priv->suspend_at; |
| 6421 |
|
| 6422 |
/* Bring the device back up */ |
| 6423 |
if (!(priv->status & STATUS_RF_KILL_SW)) |
| 6424 |
ipw2100_up(priv, 0); |
| 6425 |
|
| 6426 |
mutex_unlock(&priv->action_mutex); |
| 6427 |
|
| 6428 |
return 0; |
| 6429 |
} |
| 6430 |
|
| 6431 |
static void ipw2100_shutdown(struct pci_dev *pci_dev) |
| 6432 |
{ |
| 6433 |
struct ipw2100_priv *priv = pci_get_drvdata(pci_dev); |
| 6434 |
|
| 6435 |
/* Take down the device; powers it off, etc. */ |
| 6436 |
ipw2100_down(priv); |
| 6437 |
|
| 6438 |
pci_disable_device(pci_dev); |
| 6439 |
} |
| 6440 |
|
| 6441 |
#define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x } |
| 6442 |
|
| 6443 |
static const struct pci_device_id ipw2100_pci_id_table[] = { |
| 6444 |
IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */ |
| 6445 |
IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */ |
| 6446 |
IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */ |
| 6447 |
IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */ |
| 6448 |
IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */ |
| 6449 |
IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */ |
| 6450 |
IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */ |
| 6451 |
IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */ |
| 6452 |
IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */ |
| 6453 |
IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */ |
| 6454 |
IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */ |
| 6455 |
IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */ |
| 6456 |
IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */ |
| 6457 |
|
| 6458 |
IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */ |
| 6459 |
IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */ |
| 6460 |
IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */ |
| 6461 |
IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */ |
| 6462 |
IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */ |
| 6463 |
|
| 6464 |
IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */ |
| 6465 |
IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */ |
| 6466 |
IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */ |
| 6467 |
IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */ |
| 6468 |
IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */ |
| 6469 |
IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */ |
| 6470 |
IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */ |
| 6471 |
|
| 6472 |
IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */ |
| 6473 |
|
| 6474 |
IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */ |
| 6475 |
IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */ |
| 6476 |
IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */ |
| 6477 |
IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */ |
| 6478 |
IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */ |
| 6479 |
IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */ |
| 6480 |
IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */ |
| 6481 |
|
| 6482 |
IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */ |
| 6483 |
IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */ |
| 6484 |
IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */ |
| 6485 |
IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */ |
| 6486 |
IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */ |
| 6487 |
IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */ |
| 6488 |
|
| 6489 |
IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */ |
| 6490 |
{0,}, |
| 6491 |
}; |
| 6492 |
|
| 6493 |
MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table); |
| 6494 |
|
| 6495 |
static SIMPLE_DEV_PM_OPS(ipw2100_pm_ops, ipw2100_suspend, ipw2100_resume); |
| 6496 |
|
| 6497 |
static struct pci_driver ipw2100_pci_driver = { |
| 6498 |
.name = DRV_NAME, |
| 6499 |
.id_table = ipw2100_pci_id_table, |
| 6500 |
.probe = ipw2100_pci_init_one, |
| 6501 |
.remove = ipw2100_pci_remove_one, |
| 6502 |
.driver.pm = &ipw2100_pm_ops, |
| 6503 |
.shutdown = ipw2100_shutdown, |
| 6504 |
}; |
| 6505 |
|
| 6506 |
/* |
| 6507 |
* Initialize the ipw2100 driver/module |
| 6508 |
* |
| 6509 |
* @returns 0 if ok, < 0 errno node con error. |
| 6510 |
* |
| 6511 |
* Note: we cannot init the /proc stuff until the PCI driver is there, |
| 6512 |
* or we risk an unlikely race condition on someone accessing |
| 6513 |
* uninitialized data in the PCI dev struct through /proc. |
| 6514 |
*/ |
| 6515 |
static int __init ipw2100_init(void) |
| 6516 |
{ |
| 6517 |
int ret; |
| 6518 |
|
| 6519 |
printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION); |
| 6520 |
printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT); |
| 6521 |
|
| 6522 |
cpu_latency_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE); |
| 6523 |
|
| 6524 |
ret = pci_register_driver(&ipw2100_pci_driver); |
| 6525 |
if (ret) |
| 6526 |
goto out; |
| 6527 |
|
| 6528 |
#ifdef CONFIG_IPW2100_DEBUG |
| 6529 |
ipw2100_debug_level = debug; |
| 6530 |
ret = driver_create_file(&ipw2100_pci_driver.driver, |
| 6531 |
&driver_attr_debug_level); |
| 6532 |
#endif |
| 6533 |
|
| 6534 |
out: |
| 6535 |
return ret; |
| 6536 |
} |
| 6537 |
|
| 6538 |
/* |
| 6539 |
* Cleanup ipw2100 driver registration |
| 6540 |
*/ |
| 6541 |
static void __exit ipw2100_exit(void) |
| 6542 |
{ |
| 6543 |
/* FIXME: IPG: check that we have no instances of the devices open */ |
| 6544 |
#ifdef CONFIG_IPW2100_DEBUG |
| 6545 |
driver_remove_file(&ipw2100_pci_driver.driver, |
| 6546 |
&driver_attr_debug_level); |
| 6547 |
#endif |
| 6548 |
pci_unregister_driver(&ipw2100_pci_driver); |
| 6549 |
cpu_latency_qos_remove_request(&ipw2100_pm_qos_req); |
| 6550 |
} |
| 6551 |
|
| 6552 |
module_init(ipw2100_init); |
| 6553 |
module_exit(ipw2100_exit); |
| 6554 |
|
| 6555 |
static int ipw2100_wx_get_name(struct net_device *dev, |
| 6556 |
struct iw_request_info *info, |
| 6557 |
union iwreq_data *wrqu, char *extra) |
| 6558 |
{ |
| 6559 |
/* |
| 6560 |
* This can be called at any time. No action lock required |
| 6561 |
*/ |
| 6562 |
|
| 6563 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6564 |
if (!(priv->status & STATUS_ASSOCIATED)) |
| 6565 |
strcpy(wrqu->name, "unassociated"); |
| 6566 |
else |
| 6567 |
snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b"); |
| 6568 |
|
| 6569 |
IPW_DEBUG_WX("Name: %s\n", wrqu->name); |
| 6570 |
return 0; |
| 6571 |
} |
| 6572 |
|
| 6573 |
static int ipw2100_wx_set_freq(struct net_device *dev, |
| 6574 |
struct iw_request_info *info, |
| 6575 |
union iwreq_data *wrqu, char *extra) |
| 6576 |
{ |
| 6577 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6578 |
struct iw_freq *fwrq = &wrqu->freq; |
| 6579 |
int err = 0; |
| 6580 |
|
| 6581 |
if (priv->ieee->iw_mode == IW_MODE_INFRA) |
| 6582 |
return -EOPNOTSUPP; |
| 6583 |
|
| 6584 |
mutex_lock(&priv->action_mutex); |
| 6585 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 6586 |
err = -EIO; |
| 6587 |
goto done; |
| 6588 |
} |
| 6589 |
|
| 6590 |
/* if setting by freq convert to channel */ |
| 6591 |
if (fwrq->e == 1) { |
| 6592 |
if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) { |
| 6593 |
int f = fwrq->m / 100000; |
| 6594 |
int c = 0; |
| 6595 |
|
| 6596 |
while ((c < REG_MAX_CHANNEL) && |
| 6597 |
(f != ipw2100_frequencies[c])) |
| 6598 |
c++; |
| 6599 |
|
| 6600 |
/* hack to fall through */ |
| 6601 |
fwrq->e = 0; |
| 6602 |
fwrq->m = c + 1; |
| 6603 |
} |
| 6604 |
} |
| 6605 |
|
| 6606 |
if (fwrq->e > 0 || fwrq->m > 1000) { |
| 6607 |
err = -EOPNOTSUPP; |
| 6608 |
goto done; |
| 6609 |
} else { /* Set the channel */ |
| 6610 |
IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq->m); |
| 6611 |
err = ipw2100_set_channel(priv, fwrq->m, 0); |
| 6612 |
} |
| 6613 |
|
| 6614 |
done: |
| 6615 |
mutex_unlock(&priv->action_mutex); |
| 6616 |
return err; |
| 6617 |
} |
| 6618 |
|
| 6619 |
static int ipw2100_wx_get_freq(struct net_device *dev, |
| 6620 |
struct iw_request_info *info, |
| 6621 |
union iwreq_data *wrqu, char *extra) |
| 6622 |
{ |
| 6623 |
/* |
| 6624 |
* This can be called at any time. No action lock required |
| 6625 |
*/ |
| 6626 |
|
| 6627 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6628 |
|
| 6629 |
wrqu->freq.e = 0; |
| 6630 |
|
| 6631 |
/* If we are associated, trying to associate, or have a statically |
| 6632 |
* configured CHANNEL then return that; otherwise return ANY */ |
| 6633 |
if (priv->config & CFG_STATIC_CHANNEL || |
| 6634 |
priv->status & STATUS_ASSOCIATED) |
| 6635 |
wrqu->freq.m = priv->channel; |
| 6636 |
else |
| 6637 |
wrqu->freq.m = 0; |
| 6638 |
|
| 6639 |
IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv->channel); |
| 6640 |
return 0; |
| 6641 |
|
| 6642 |
} |
| 6643 |
|
| 6644 |
static int ipw2100_wx_set_mode(struct net_device *dev, |
| 6645 |
struct iw_request_info *info, |
| 6646 |
union iwreq_data *wrqu, char *extra) |
| 6647 |
{ |
| 6648 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6649 |
int err = 0; |
| 6650 |
|
| 6651 |
IPW_DEBUG_WX("SET Mode -> %d\n", wrqu->mode); |
| 6652 |
|
| 6653 |
if (wrqu->mode == priv->ieee->iw_mode) |
| 6654 |
return 0; |
| 6655 |
|
| 6656 |
mutex_lock(&priv->action_mutex); |
| 6657 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 6658 |
err = -EIO; |
| 6659 |
goto done; |
| 6660 |
} |
| 6661 |
|
| 6662 |
switch (wrqu->mode) { |
| 6663 |
#ifdef CONFIG_IPW2100_MONITOR |
| 6664 |
case IW_MODE_MONITOR: |
| 6665 |
err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); |
| 6666 |
break; |
| 6667 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 6668 |
case IW_MODE_ADHOC: |
| 6669 |
err = ipw2100_switch_mode(priv, IW_MODE_ADHOC); |
| 6670 |
break; |
| 6671 |
case IW_MODE_INFRA: |
| 6672 |
case IW_MODE_AUTO: |
| 6673 |
default: |
| 6674 |
err = ipw2100_switch_mode(priv, IW_MODE_INFRA); |
| 6675 |
break; |
| 6676 |
} |
| 6677 |
|
| 6678 |
done: |
| 6679 |
mutex_unlock(&priv->action_mutex); |
| 6680 |
return err; |
| 6681 |
} |
| 6682 |
|
| 6683 |
static int ipw2100_wx_get_mode(struct net_device *dev, |
| 6684 |
struct iw_request_info *info, |
| 6685 |
union iwreq_data *wrqu, char *extra) |
| 6686 |
{ |
| 6687 |
/* |
| 6688 |
* This can be called at any time. No action lock required |
| 6689 |
*/ |
| 6690 |
|
| 6691 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6692 |
|
| 6693 |
wrqu->mode = priv->ieee->iw_mode; |
| 6694 |
IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode); |
| 6695 |
|
| 6696 |
return 0; |
| 6697 |
} |
| 6698 |
|
| 6699 |
#define POWER_MODES 5 |
| 6700 |
|
| 6701 |
/* Values are in microsecond */ |
| 6702 |
static const s32 timeout_duration[POWER_MODES] = { |
| 6703 |
350000, |
| 6704 |
250000, |
| 6705 |
75000, |
| 6706 |
37000, |
| 6707 |
25000, |
| 6708 |
}; |
| 6709 |
|
| 6710 |
static const s32 period_duration[POWER_MODES] = { |
| 6711 |
400000, |
| 6712 |
700000, |
| 6713 |
1000000, |
| 6714 |
1000000, |
| 6715 |
1000000 |
| 6716 |
}; |
| 6717 |
|
| 6718 |
static int ipw2100_wx_get_range(struct net_device *dev, |
| 6719 |
struct iw_request_info *info, |
| 6720 |
union iwreq_data *wrqu, char *extra) |
| 6721 |
{ |
| 6722 |
/* |
| 6723 |
* This can be called at any time. No action lock required |
| 6724 |
*/ |
| 6725 |
|
| 6726 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6727 |
struct iw_range *range = (struct iw_range *)extra; |
| 6728 |
u16 val; |
| 6729 |
int i, level; |
| 6730 |
|
| 6731 |
wrqu->data.length = sizeof(*range); |
| 6732 |
memset(range, 0, sizeof(*range)); |
| 6733 |
|
| 6734 |
/* Let's try to keep this struct in the same order as in |
| 6735 |
* linux/include/wireless.h |
| 6736 |
*/ |
| 6737 |
|
| 6738 |
/* TODO: See what values we can set, and remove the ones we can't |
| 6739 |
* set, or fill them with some default data. |
| 6740 |
*/ |
| 6741 |
|
| 6742 |
/* ~5 Mb/s real (802.11b) */ |
| 6743 |
range->throughput = 5 * 1000 * 1000; |
| 6744 |
|
| 6745 |
// range->sensitivity; /* signal level threshold range */ |
| 6746 |
|
| 6747 |
range->max_qual.qual = 100; |
| 6748 |
/* TODO: Find real max RSSI and stick here */ |
| 6749 |
range->max_qual.level = 0; |
| 6750 |
range->max_qual.noise = 0; |
| 6751 |
range->max_qual.updated = 7; /* Updated all three */ |
| 6752 |
|
| 6753 |
range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ |
| 6754 |
/* TODO: Find real 'good' to 'bad' threshold value for RSSI */ |
| 6755 |
range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; |
| 6756 |
range->avg_qual.noise = 0; |
| 6757 |
range->avg_qual.updated = 7; /* Updated all three */ |
| 6758 |
|
| 6759 |
range->num_bitrates = RATE_COUNT; |
| 6760 |
|
| 6761 |
for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) { |
| 6762 |
range->bitrate[i] = ipw2100_bg_rates[i].bitrate * 100 * 1000; |
| 6763 |
} |
| 6764 |
|
| 6765 |
range->min_rts = MIN_RTS_THRESHOLD; |
| 6766 |
range->max_rts = MAX_RTS_THRESHOLD; |
| 6767 |
range->min_frag = MIN_FRAG_THRESHOLD; |
| 6768 |
range->max_frag = MAX_FRAG_THRESHOLD; |
| 6769 |
|
| 6770 |
range->min_pmp = period_duration[0]; /* Minimal PM period */ |
| 6771 |
range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */ |
| 6772 |
range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */ |
| 6773 |
range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */ |
| 6774 |
|
| 6775 |
/* How to decode max/min PM period */ |
| 6776 |
range->pmp_flags = IW_POWER_PERIOD; |
| 6777 |
/* How to decode max/min PM period */ |
| 6778 |
range->pmt_flags = IW_POWER_TIMEOUT; |
| 6779 |
/* What PM options are supported */ |
| 6780 |
range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD; |
| 6781 |
|
| 6782 |
range->encoding_size[0] = 5; |
| 6783 |
range->encoding_size[1] = 13; /* Different token sizes */ |
| 6784 |
range->num_encoding_sizes = 2; /* Number of entry in the list */ |
| 6785 |
range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */ |
| 6786 |
// range->encoding_login_index; /* token index for login token */ |
| 6787 |
|
| 6788 |
if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
| 6789 |
range->txpower_capa = IW_TXPOW_DBM; |
| 6790 |
range->num_txpower = IW_MAX_TXPOWER; |
| 6791 |
for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); |
| 6792 |
i < IW_MAX_TXPOWER; |
| 6793 |
i++, level -= |
| 6794 |
((IPW_TX_POWER_MAX_DBM - |
| 6795 |
IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1)) |
| 6796 |
range->txpower[i] = level / 16; |
| 6797 |
} else { |
| 6798 |
range->txpower_capa = 0; |
| 6799 |
range->num_txpower = 0; |
| 6800 |
} |
| 6801 |
|
| 6802 |
/* Set the Wireless Extension versions */ |
| 6803 |
range->we_version_compiled = WIRELESS_EXT; |
| 6804 |
range->we_version_source = 18; |
| 6805 |
|
| 6806 |
// range->retry_capa; /* What retry options are supported */ |
| 6807 |
// range->retry_flags; /* How to decode max/min retry limit */ |
| 6808 |
// range->r_time_flags; /* How to decode max/min retry life */ |
| 6809 |
// range->min_retry; /* Minimal number of retries */ |
| 6810 |
// range->max_retry; /* Maximal number of retries */ |
| 6811 |
// range->min_r_time; /* Minimal retry lifetime */ |
| 6812 |
// range->max_r_time; /* Maximal retry lifetime */ |
| 6813 |
|
| 6814 |
range->num_channels = FREQ_COUNT; |
| 6815 |
|
| 6816 |
val = 0; |
| 6817 |
for (i = 0; i < FREQ_COUNT; i++) { |
| 6818 |
// TODO: Include only legal frequencies for some countries |
| 6819 |
// if (local->channel_mask & (1 << i)) { |
| 6820 |
range->freq[val].i = i + 1; |
| 6821 |
range->freq[val].m = ipw2100_frequencies[i] * 100000; |
| 6822 |
range->freq[val].e = 1; |
| 6823 |
val++; |
| 6824 |
// } |
| 6825 |
if (val == IW_MAX_FREQUENCIES) |
| 6826 |
break; |
| 6827 |
} |
| 6828 |
range->num_frequency = val; |
| 6829 |
|
| 6830 |
/* Event capability (kernel + driver) */ |
| 6831 |
range->event_capa[0] = (IW_EVENT_CAPA_K_0 | |
| 6832 |
IW_EVENT_CAPA_MASK(SIOCGIWAP)); |
| 6833 |
range->event_capa[1] = IW_EVENT_CAPA_K_1; |
| 6834 |
|
| 6835 |
range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | |
| 6836 |
IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; |
| 6837 |
|
| 6838 |
IPW_DEBUG_WX("GET Range\n"); |
| 6839 |
|
| 6840 |
return 0; |
| 6841 |
} |
| 6842 |
|
| 6843 |
static int ipw2100_wx_set_wap(struct net_device *dev, |
| 6844 |
struct iw_request_info *info, |
| 6845 |
union iwreq_data *wrqu, char *extra) |
| 6846 |
{ |
| 6847 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6848 |
int err = 0; |
| 6849 |
|
| 6850 |
// sanity checks |
| 6851 |
if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) |
| 6852 |
return -EINVAL; |
| 6853 |
|
| 6854 |
mutex_lock(&priv->action_mutex); |
| 6855 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 6856 |
err = -EIO; |
| 6857 |
goto done; |
| 6858 |
} |
| 6859 |
|
| 6860 |
if (is_broadcast_ether_addr(wrqu->ap_addr.sa_data) || |
| 6861 |
is_zero_ether_addr(wrqu->ap_addr.sa_data)) { |
| 6862 |
/* we disable mandatory BSSID association */ |
| 6863 |
IPW_DEBUG_WX("exit - disable mandatory BSSID\n"); |
| 6864 |
priv->config &= ~CFG_STATIC_BSSID; |
| 6865 |
err = ipw2100_set_mandatory_bssid(priv, NULL, 0); |
| 6866 |
goto done; |
| 6867 |
} |
| 6868 |
|
| 6869 |
priv->config |= CFG_STATIC_BSSID; |
| 6870 |
memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN); |
| 6871 |
|
| 6872 |
err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0); |
| 6873 |
|
| 6874 |
IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu->ap_addr.sa_data); |
| 6875 |
|
| 6876 |
done: |
| 6877 |
mutex_unlock(&priv->action_mutex); |
| 6878 |
return err; |
| 6879 |
} |
| 6880 |
|
| 6881 |
static int ipw2100_wx_get_wap(struct net_device *dev, |
| 6882 |
struct iw_request_info *info, |
| 6883 |
union iwreq_data *wrqu, char *extra) |
| 6884 |
{ |
| 6885 |
/* |
| 6886 |
* This can be called at any time. No action lock required |
| 6887 |
*/ |
| 6888 |
|
| 6889 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6890 |
|
| 6891 |
/* If we are associated, trying to associate, or have a statically |
| 6892 |
* configured BSSID then return that; otherwise return ANY */ |
| 6893 |
if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) { |
| 6894 |
wrqu->ap_addr.sa_family = ARPHRD_ETHER; |
| 6895 |
memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN); |
| 6896 |
} else |
| 6897 |
eth_zero_addr(wrqu->ap_addr.sa_data); |
| 6898 |
|
| 6899 |
IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu->ap_addr.sa_data); |
| 6900 |
return 0; |
| 6901 |
} |
| 6902 |
|
| 6903 |
static int ipw2100_wx_set_essid(struct net_device *dev, |
| 6904 |
struct iw_request_info *info, |
| 6905 |
union iwreq_data *wrqu, char *extra) |
| 6906 |
{ |
| 6907 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6908 |
char *essid = ""; /* ANY */ |
| 6909 |
int length = 0; |
| 6910 |
int err = 0; |
| 6911 |
|
| 6912 |
mutex_lock(&priv->action_mutex); |
| 6913 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 6914 |
err = -EIO; |
| 6915 |
goto done; |
| 6916 |
} |
| 6917 |
|
| 6918 |
if (wrqu->essid.flags && wrqu->essid.length) { |
| 6919 |
length = wrqu->essid.length; |
| 6920 |
essid = extra; |
| 6921 |
} |
| 6922 |
|
| 6923 |
if (length == 0) { |
| 6924 |
IPW_DEBUG_WX("Setting ESSID to ANY\n"); |
| 6925 |
priv->config &= ~CFG_STATIC_ESSID; |
| 6926 |
err = ipw2100_set_essid(priv, NULL, 0, 0); |
| 6927 |
goto done; |
| 6928 |
} |
| 6929 |
|
| 6930 |
length = min(length, IW_ESSID_MAX_SIZE); |
| 6931 |
|
| 6932 |
priv->config |= CFG_STATIC_ESSID; |
| 6933 |
|
| 6934 |
if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) { |
| 6935 |
IPW_DEBUG_WX("ESSID set to current ESSID.\n"); |
| 6936 |
err = 0; |
| 6937 |
goto done; |
| 6938 |
} |
| 6939 |
|
| 6940 |
IPW_DEBUG_WX("Setting ESSID: '%*pE' (%d)\n", length, essid, length); |
| 6941 |
|
| 6942 |
priv->essid_len = length; |
| 6943 |
memcpy(priv->essid, essid, priv->essid_len); |
| 6944 |
|
| 6945 |
err = ipw2100_set_essid(priv, essid, length, 0); |
| 6946 |
|
| 6947 |
done: |
| 6948 |
mutex_unlock(&priv->action_mutex); |
| 6949 |
return err; |
| 6950 |
} |
| 6951 |
|
| 6952 |
static int ipw2100_wx_get_essid(struct net_device *dev, |
| 6953 |
struct iw_request_info *info, |
| 6954 |
union iwreq_data *wrqu, char *extra) |
| 6955 |
{ |
| 6956 |
/* |
| 6957 |
* This can be called at any time. No action lock required |
| 6958 |
*/ |
| 6959 |
|
| 6960 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6961 |
|
| 6962 |
/* If we are associated, trying to associate, or have a statically |
| 6963 |
* configured ESSID then return that; otherwise return ANY */ |
| 6964 |
if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) { |
| 6965 |
IPW_DEBUG_WX("Getting essid: '%*pE'\n", |
| 6966 |
priv->essid_len, priv->essid); |
| 6967 |
memcpy(extra, priv->essid, priv->essid_len); |
| 6968 |
wrqu->essid.length = priv->essid_len; |
| 6969 |
wrqu->essid.flags = 1; /* active */ |
| 6970 |
} else { |
| 6971 |
IPW_DEBUG_WX("Getting essid: ANY\n"); |
| 6972 |
wrqu->essid.length = 0; |
| 6973 |
wrqu->essid.flags = 0; /* active */ |
| 6974 |
} |
| 6975 |
|
| 6976 |
return 0; |
| 6977 |
} |
| 6978 |
|
| 6979 |
static int ipw2100_wx_set_nick(struct net_device *dev, |
| 6980 |
struct iw_request_info *info, |
| 6981 |
union iwreq_data *wrqu, char *extra) |
| 6982 |
{ |
| 6983 |
/* |
| 6984 |
* This can be called at any time. No action lock required |
| 6985 |
*/ |
| 6986 |
|
| 6987 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 6988 |
|
| 6989 |
if (wrqu->data.length > IW_ESSID_MAX_SIZE) |
| 6990 |
return -E2BIG; |
| 6991 |
|
| 6992 |
wrqu->data.length = min_t(size_t, wrqu->data.length, sizeof(priv->nick)); |
| 6993 |
memset(priv->nick, 0, sizeof(priv->nick)); |
| 6994 |
memcpy(priv->nick, extra, wrqu->data.length); |
| 6995 |
|
| 6996 |
IPW_DEBUG_WX("SET Nickname -> %s\n", priv->nick); |
| 6997 |
|
| 6998 |
return 0; |
| 6999 |
} |
| 7000 |
|
| 7001 |
static int ipw2100_wx_get_nick(struct net_device *dev, |
| 7002 |
struct iw_request_info *info, |
| 7003 |
union iwreq_data *wrqu, char *extra) |
| 7004 |
{ |
| 7005 |
/* |
| 7006 |
* This can be called at any time. No action lock required |
| 7007 |
*/ |
| 7008 |
|
| 7009 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7010 |
|
| 7011 |
wrqu->data.length = strlen(priv->nick); |
| 7012 |
memcpy(extra, priv->nick, wrqu->data.length); |
| 7013 |
wrqu->data.flags = 1; /* active */ |
| 7014 |
|
| 7015 |
IPW_DEBUG_WX("GET Nickname -> %s\n", extra); |
| 7016 |
|
| 7017 |
return 0; |
| 7018 |
} |
| 7019 |
|
| 7020 |
static int ipw2100_wx_set_rate(struct net_device *dev, |
| 7021 |
struct iw_request_info *info, |
| 7022 |
union iwreq_data *wrqu, char *extra) |
| 7023 |
{ |
| 7024 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7025 |
u32 target_rate = wrqu->bitrate.value; |
| 7026 |
u32 rate; |
| 7027 |
int err = 0; |
| 7028 |
|
| 7029 |
mutex_lock(&priv->action_mutex); |
| 7030 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7031 |
err = -EIO; |
| 7032 |
goto done; |
| 7033 |
} |
| 7034 |
|
| 7035 |
rate = 0; |
| 7036 |
|
| 7037 |
if (target_rate == 1000000 || |
| 7038 |
(!wrqu->bitrate.fixed && target_rate > 1000000)) |
| 7039 |
rate |= TX_RATE_1_MBIT; |
| 7040 |
if (target_rate == 2000000 || |
| 7041 |
(!wrqu->bitrate.fixed && target_rate > 2000000)) |
| 7042 |
rate |= TX_RATE_2_MBIT; |
| 7043 |
if (target_rate == 5500000 || |
| 7044 |
(!wrqu->bitrate.fixed && target_rate > 5500000)) |
| 7045 |
rate |= TX_RATE_5_5_MBIT; |
| 7046 |
if (target_rate == 11000000 || |
| 7047 |
(!wrqu->bitrate.fixed && target_rate > 11000000)) |
| 7048 |
rate |= TX_RATE_11_MBIT; |
| 7049 |
if (rate == 0) |
| 7050 |
rate = DEFAULT_TX_RATES; |
| 7051 |
|
| 7052 |
err = ipw2100_set_tx_rates(priv, rate, 0); |
| 7053 |
|
| 7054 |
IPW_DEBUG_WX("SET Rate -> %04X\n", rate); |
| 7055 |
done: |
| 7056 |
mutex_unlock(&priv->action_mutex); |
| 7057 |
return err; |
| 7058 |
} |
| 7059 |
|
| 7060 |
static int ipw2100_wx_get_rate(struct net_device *dev, |
| 7061 |
struct iw_request_info *info, |
| 7062 |
union iwreq_data *wrqu, char *extra) |
| 7063 |
{ |
| 7064 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7065 |
int val; |
| 7066 |
unsigned int len = sizeof(val); |
| 7067 |
int err = 0; |
| 7068 |
|
| 7069 |
if (!(priv->status & STATUS_ENABLED) || |
| 7070 |
priv->status & STATUS_RF_KILL_MASK || |
| 7071 |
!(priv->status & STATUS_ASSOCIATED)) { |
| 7072 |
wrqu->bitrate.value = 0; |
| 7073 |
return 0; |
| 7074 |
} |
| 7075 |
|
| 7076 |
mutex_lock(&priv->action_mutex); |
| 7077 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7078 |
err = -EIO; |
| 7079 |
goto done; |
| 7080 |
} |
| 7081 |
|
| 7082 |
err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len); |
| 7083 |
if (err) { |
| 7084 |
IPW_DEBUG_WX("failed querying ordinals.\n"); |
| 7085 |
goto done; |
| 7086 |
} |
| 7087 |
|
| 7088 |
switch (val & TX_RATE_MASK) { |
| 7089 |
case TX_RATE_1_MBIT: |
| 7090 |
wrqu->bitrate.value = 1000000; |
| 7091 |
break; |
| 7092 |
case TX_RATE_2_MBIT: |
| 7093 |
wrqu->bitrate.value = 2000000; |
| 7094 |
break; |
| 7095 |
case TX_RATE_5_5_MBIT: |
| 7096 |
wrqu->bitrate.value = 5500000; |
| 7097 |
break; |
| 7098 |
case TX_RATE_11_MBIT: |
| 7099 |
wrqu->bitrate.value = 11000000; |
| 7100 |
break; |
| 7101 |
default: |
| 7102 |
wrqu->bitrate.value = 0; |
| 7103 |
} |
| 7104 |
|
| 7105 |
IPW_DEBUG_WX("GET Rate -> %d\n", wrqu->bitrate.value); |
| 7106 |
|
| 7107 |
done: |
| 7108 |
mutex_unlock(&priv->action_mutex); |
| 7109 |
return err; |
| 7110 |
} |
| 7111 |
|
| 7112 |
static int ipw2100_wx_set_rts(struct net_device *dev, |
| 7113 |
struct iw_request_info *info, |
| 7114 |
union iwreq_data *wrqu, char *extra) |
| 7115 |
{ |
| 7116 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7117 |
int value, err; |
| 7118 |
|
| 7119 |
/* Auto RTS not yet supported */ |
| 7120 |
if (wrqu->rts.fixed == 0) |
| 7121 |
return -EINVAL; |
| 7122 |
|
| 7123 |
mutex_lock(&priv->action_mutex); |
| 7124 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7125 |
err = -EIO; |
| 7126 |
goto done; |
| 7127 |
} |
| 7128 |
|
| 7129 |
if (wrqu->rts.disabled) |
| 7130 |
value = priv->rts_threshold | RTS_DISABLED; |
| 7131 |
else { |
| 7132 |
if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) { |
| 7133 |
err = -EINVAL; |
| 7134 |
goto done; |
| 7135 |
} |
| 7136 |
value = wrqu->rts.value; |
| 7137 |
} |
| 7138 |
|
| 7139 |
err = ipw2100_set_rts_threshold(priv, value); |
| 7140 |
|
| 7141 |
IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value); |
| 7142 |
done: |
| 7143 |
mutex_unlock(&priv->action_mutex); |
| 7144 |
return err; |
| 7145 |
} |
| 7146 |
|
| 7147 |
static int ipw2100_wx_get_rts(struct net_device *dev, |
| 7148 |
struct iw_request_info *info, |
| 7149 |
union iwreq_data *wrqu, char *extra) |
| 7150 |
{ |
| 7151 |
/* |
| 7152 |
* This can be called at any time. No action lock required |
| 7153 |
*/ |
| 7154 |
|
| 7155 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7156 |
|
| 7157 |
wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED; |
| 7158 |
wrqu->rts.fixed = 1; /* no auto select */ |
| 7159 |
|
| 7160 |
/* If RTS is set to the default value, then it is disabled */ |
| 7161 |
wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0; |
| 7162 |
|
| 7163 |
IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu->rts.value); |
| 7164 |
|
| 7165 |
return 0; |
| 7166 |
} |
| 7167 |
|
| 7168 |
static int ipw2100_wx_set_txpow(struct net_device *dev, |
| 7169 |
struct iw_request_info *info, |
| 7170 |
union iwreq_data *wrqu, char *extra) |
| 7171 |
{ |
| 7172 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7173 |
int err = 0, value; |
| 7174 |
|
| 7175 |
if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled)) |
| 7176 |
return -EINPROGRESS; |
| 7177 |
|
| 7178 |
if (priv->ieee->iw_mode != IW_MODE_ADHOC) |
| 7179 |
return 0; |
| 7180 |
|
| 7181 |
if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) |
| 7182 |
return -EINVAL; |
| 7183 |
|
| 7184 |
if (wrqu->txpower.fixed == 0) |
| 7185 |
value = IPW_TX_POWER_DEFAULT; |
| 7186 |
else { |
| 7187 |
if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM || |
| 7188 |
wrqu->txpower.value > IPW_TX_POWER_MAX_DBM) |
| 7189 |
return -EINVAL; |
| 7190 |
|
| 7191 |
value = wrqu->txpower.value; |
| 7192 |
} |
| 7193 |
|
| 7194 |
mutex_lock(&priv->action_mutex); |
| 7195 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7196 |
err = -EIO; |
| 7197 |
goto done; |
| 7198 |
} |
| 7199 |
|
| 7200 |
err = ipw2100_set_tx_power(priv, value); |
| 7201 |
|
| 7202 |
IPW_DEBUG_WX("SET TX Power -> %d\n", value); |
| 7203 |
|
| 7204 |
done: |
| 7205 |
mutex_unlock(&priv->action_mutex); |
| 7206 |
return err; |
| 7207 |
} |
| 7208 |
|
| 7209 |
static int ipw2100_wx_get_txpow(struct net_device *dev, |
| 7210 |
struct iw_request_info *info, |
| 7211 |
union iwreq_data *wrqu, char *extra) |
| 7212 |
{ |
| 7213 |
/* |
| 7214 |
* This can be called at any time. No action lock required |
| 7215 |
*/ |
| 7216 |
|
| 7217 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7218 |
|
| 7219 |
wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0; |
| 7220 |
|
| 7221 |
if (priv->tx_power == IPW_TX_POWER_DEFAULT) { |
| 7222 |
wrqu->txpower.fixed = 0; |
| 7223 |
wrqu->txpower.value = IPW_TX_POWER_MAX_DBM; |
| 7224 |
} else { |
| 7225 |
wrqu->txpower.fixed = 1; |
| 7226 |
wrqu->txpower.value = priv->tx_power; |
| 7227 |
} |
| 7228 |
|
| 7229 |
wrqu->txpower.flags = IW_TXPOW_DBM; |
| 7230 |
|
| 7231 |
IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu->txpower.value); |
| 7232 |
|
| 7233 |
return 0; |
| 7234 |
} |
| 7235 |
|
| 7236 |
static int ipw2100_wx_set_frag(struct net_device *dev, |
| 7237 |
struct iw_request_info *info, |
| 7238 |
union iwreq_data *wrqu, char *extra) |
| 7239 |
{ |
| 7240 |
/* |
| 7241 |
* This can be called at any time. No action lock required |
| 7242 |
*/ |
| 7243 |
|
| 7244 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7245 |
|
| 7246 |
if (!wrqu->frag.fixed) |
| 7247 |
return -EINVAL; |
| 7248 |
|
| 7249 |
if (wrqu->frag.disabled) { |
| 7250 |
priv->frag_threshold |= FRAG_DISABLED; |
| 7251 |
priv->ieee->fts = DEFAULT_FTS; |
| 7252 |
} else { |
| 7253 |
if (wrqu->frag.value < MIN_FRAG_THRESHOLD || |
| 7254 |
wrqu->frag.value > MAX_FRAG_THRESHOLD) |
| 7255 |
return -EINVAL; |
| 7256 |
|
| 7257 |
priv->ieee->fts = wrqu->frag.value & ~0x1; |
| 7258 |
priv->frag_threshold = priv->ieee->fts; |
| 7259 |
} |
| 7260 |
|
| 7261 |
IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv->ieee->fts); |
| 7262 |
|
| 7263 |
return 0; |
| 7264 |
} |
| 7265 |
|
| 7266 |
static int ipw2100_wx_get_frag(struct net_device *dev, |
| 7267 |
struct iw_request_info *info, |
| 7268 |
union iwreq_data *wrqu, char *extra) |
| 7269 |
{ |
| 7270 |
/* |
| 7271 |
* This can be called at any time. No action lock required |
| 7272 |
*/ |
| 7273 |
|
| 7274 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7275 |
wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED; |
| 7276 |
wrqu->frag.fixed = 0; /* no auto select */ |
| 7277 |
wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0; |
| 7278 |
|
| 7279 |
IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu->frag.value); |
| 7280 |
|
| 7281 |
return 0; |
| 7282 |
} |
| 7283 |
|
| 7284 |
static int ipw2100_wx_set_retry(struct net_device *dev, |
| 7285 |
struct iw_request_info *info, |
| 7286 |
union iwreq_data *wrqu, char *extra) |
| 7287 |
{ |
| 7288 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7289 |
int err = 0; |
| 7290 |
|
| 7291 |
if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled) |
| 7292 |
return -EINVAL; |
| 7293 |
|
| 7294 |
if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) |
| 7295 |
return 0; |
| 7296 |
|
| 7297 |
mutex_lock(&priv->action_mutex); |
| 7298 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7299 |
err = -EIO; |
| 7300 |
goto done; |
| 7301 |
} |
| 7302 |
|
| 7303 |
if (wrqu->retry.flags & IW_RETRY_SHORT) { |
| 7304 |
err = ipw2100_set_short_retry(priv, wrqu->retry.value); |
| 7305 |
IPW_DEBUG_WX("SET Short Retry Limit -> %d\n", |
| 7306 |
wrqu->retry.value); |
| 7307 |
goto done; |
| 7308 |
} |
| 7309 |
|
| 7310 |
if (wrqu->retry.flags & IW_RETRY_LONG) { |
| 7311 |
err = ipw2100_set_long_retry(priv, wrqu->retry.value); |
| 7312 |
IPW_DEBUG_WX("SET Long Retry Limit -> %d\n", |
| 7313 |
wrqu->retry.value); |
| 7314 |
goto done; |
| 7315 |
} |
| 7316 |
|
| 7317 |
err = ipw2100_set_short_retry(priv, wrqu->retry.value); |
| 7318 |
if (!err) |
| 7319 |
err = ipw2100_set_long_retry(priv, wrqu->retry.value); |
| 7320 |
|
| 7321 |
IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu->retry.value); |
| 7322 |
|
| 7323 |
done: |
| 7324 |
mutex_unlock(&priv->action_mutex); |
| 7325 |
return err; |
| 7326 |
} |
| 7327 |
|
| 7328 |
static int ipw2100_wx_get_retry(struct net_device *dev, |
| 7329 |
struct iw_request_info *info, |
| 7330 |
union iwreq_data *wrqu, char *extra) |
| 7331 |
{ |
| 7332 |
/* |
| 7333 |
* This can be called at any time. No action lock required |
| 7334 |
*/ |
| 7335 |
|
| 7336 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7337 |
|
| 7338 |
wrqu->retry.disabled = 0; /* can't be disabled */ |
| 7339 |
|
| 7340 |
if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) |
| 7341 |
return -EINVAL; |
| 7342 |
|
| 7343 |
if (wrqu->retry.flags & IW_RETRY_LONG) { |
| 7344 |
wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG; |
| 7345 |
wrqu->retry.value = priv->long_retry_limit; |
| 7346 |
} else { |
| 7347 |
wrqu->retry.flags = |
| 7348 |
(priv->short_retry_limit != |
| 7349 |
priv->long_retry_limit) ? |
| 7350 |
IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT; |
| 7351 |
|
| 7352 |
wrqu->retry.value = priv->short_retry_limit; |
| 7353 |
} |
| 7354 |
|
| 7355 |
IPW_DEBUG_WX("GET Retry -> %d\n", wrqu->retry.value); |
| 7356 |
|
| 7357 |
return 0; |
| 7358 |
} |
| 7359 |
|
| 7360 |
static int ipw2100_wx_set_scan(struct net_device *dev, |
| 7361 |
struct iw_request_info *info, |
| 7362 |
union iwreq_data *wrqu, char *extra) |
| 7363 |
{ |
| 7364 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7365 |
int err = 0; |
| 7366 |
|
| 7367 |
mutex_lock(&priv->action_mutex); |
| 7368 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7369 |
err = -EIO; |
| 7370 |
goto done; |
| 7371 |
} |
| 7372 |
|
| 7373 |
IPW_DEBUG_WX("Initiating scan...\n"); |
| 7374 |
|
| 7375 |
priv->user_requested_scan = 1; |
| 7376 |
if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) { |
| 7377 |
IPW_DEBUG_WX("Start scan failed.\n"); |
| 7378 |
|
| 7379 |
/* TODO: Mark a scan as pending so when hardware initialized |
| 7380 |
* a scan starts */ |
| 7381 |
} |
| 7382 |
|
| 7383 |
done: |
| 7384 |
mutex_unlock(&priv->action_mutex); |
| 7385 |
return err; |
| 7386 |
} |
| 7387 |
|
| 7388 |
static int ipw2100_wx_get_scan(struct net_device *dev, |
| 7389 |
struct iw_request_info *info, |
| 7390 |
union iwreq_data *wrqu, char *extra) |
| 7391 |
{ |
| 7392 |
/* |
| 7393 |
* This can be called at any time. No action lock required |
| 7394 |
*/ |
| 7395 |
|
| 7396 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7397 |
return libipw_wx_get_scan(priv->ieee, info, wrqu, extra); |
| 7398 |
} |
| 7399 |
|
| 7400 |
/* |
| 7401 |
* Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c |
| 7402 |
*/ |
| 7403 |
static int ipw2100_wx_set_encode(struct net_device *dev, |
| 7404 |
struct iw_request_info *info, |
| 7405 |
union iwreq_data *wrqu, char *key) |
| 7406 |
{ |
| 7407 |
/* |
| 7408 |
* No check of STATUS_INITIALIZED required |
| 7409 |
*/ |
| 7410 |
|
| 7411 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7412 |
return libipw_wx_set_encode(priv->ieee, info, wrqu, key); |
| 7413 |
} |
| 7414 |
|
| 7415 |
static int ipw2100_wx_get_encode(struct net_device *dev, |
| 7416 |
struct iw_request_info *info, |
| 7417 |
union iwreq_data *wrqu, char *key) |
| 7418 |
{ |
| 7419 |
/* |
| 7420 |
* This can be called at any time. No action lock required |
| 7421 |
*/ |
| 7422 |
|
| 7423 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7424 |
return libipw_wx_get_encode(priv->ieee, info, wrqu, key); |
| 7425 |
} |
| 7426 |
|
| 7427 |
static int ipw2100_wx_set_power(struct net_device *dev, |
| 7428 |
struct iw_request_info *info, |
| 7429 |
union iwreq_data *wrqu, char *extra) |
| 7430 |
{ |
| 7431 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7432 |
int err = 0; |
| 7433 |
|
| 7434 |
mutex_lock(&priv->action_mutex); |
| 7435 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7436 |
err = -EIO; |
| 7437 |
goto done; |
| 7438 |
} |
| 7439 |
|
| 7440 |
if (wrqu->power.disabled) { |
| 7441 |
priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); |
| 7442 |
err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); |
| 7443 |
IPW_DEBUG_WX("SET Power Management Mode -> off\n"); |
| 7444 |
goto done; |
| 7445 |
} |
| 7446 |
|
| 7447 |
switch (wrqu->power.flags & IW_POWER_MODE) { |
| 7448 |
case IW_POWER_ON: /* If not specified */ |
| 7449 |
case IW_POWER_MODE: /* If set all mask */ |
| 7450 |
case IW_POWER_ALL_R: /* If explicitly state all */ |
| 7451 |
break; |
| 7452 |
default: /* Otherwise we don't support it */ |
| 7453 |
IPW_DEBUG_WX("SET PM Mode: %X not supported.\n", |
| 7454 |
wrqu->power.flags); |
| 7455 |
err = -EOPNOTSUPP; |
| 7456 |
goto done; |
| 7457 |
} |
| 7458 |
|
| 7459 |
/* If the user hasn't specified a power management mode yet, default |
| 7460 |
* to BATTERY */ |
| 7461 |
priv->power_mode = IPW_POWER_ENABLED | priv->power_mode; |
| 7462 |
err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode)); |
| 7463 |
|
| 7464 |
IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode); |
| 7465 |
|
| 7466 |
done: |
| 7467 |
mutex_unlock(&priv->action_mutex); |
| 7468 |
return err; |
| 7469 |
|
| 7470 |
} |
| 7471 |
|
| 7472 |
static int ipw2100_wx_get_power(struct net_device *dev, |
| 7473 |
struct iw_request_info *info, |
| 7474 |
union iwreq_data *wrqu, char *extra) |
| 7475 |
{ |
| 7476 |
/* |
| 7477 |
* This can be called at any time. No action lock required |
| 7478 |
*/ |
| 7479 |
|
| 7480 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7481 |
|
| 7482 |
if (!(priv->power_mode & IPW_POWER_ENABLED)) |
| 7483 |
wrqu->power.disabled = 1; |
| 7484 |
else { |
| 7485 |
wrqu->power.disabled = 0; |
| 7486 |
wrqu->power.flags = 0; |
| 7487 |
} |
| 7488 |
|
| 7489 |
IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode); |
| 7490 |
|
| 7491 |
return 0; |
| 7492 |
} |
| 7493 |
|
| 7494 |
/* |
| 7495 |
* WE-18 WPA support |
| 7496 |
*/ |
| 7497 |
|
| 7498 |
/* SIOCSIWGENIE */ |
| 7499 |
static int ipw2100_wx_set_genie(struct net_device *dev, |
| 7500 |
struct iw_request_info *info, |
| 7501 |
union iwreq_data *wrqu, char *extra) |
| 7502 |
{ |
| 7503 |
|
| 7504 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7505 |
struct libipw_device *ieee = priv->ieee; |
| 7506 |
u8 *buf; |
| 7507 |
|
| 7508 |
if (!ieee->wpa_enabled) |
| 7509 |
return -EOPNOTSUPP; |
| 7510 |
|
| 7511 |
if (wrqu->data.length > MAX_WPA_IE_LEN || |
| 7512 |
(wrqu->data.length && extra == NULL)) |
| 7513 |
return -EINVAL; |
| 7514 |
|
| 7515 |
if (wrqu->data.length) { |
| 7516 |
buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL); |
| 7517 |
if (buf == NULL) |
| 7518 |
return -ENOMEM; |
| 7519 |
|
| 7520 |
kfree(ieee->wpa_ie); |
| 7521 |
ieee->wpa_ie = buf; |
| 7522 |
ieee->wpa_ie_len = wrqu->data.length; |
| 7523 |
} else { |
| 7524 |
kfree(ieee->wpa_ie); |
| 7525 |
ieee->wpa_ie = NULL; |
| 7526 |
ieee->wpa_ie_len = 0; |
| 7527 |
} |
| 7528 |
|
| 7529 |
ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len); |
| 7530 |
|
| 7531 |
return 0; |
| 7532 |
} |
| 7533 |
|
| 7534 |
/* SIOCGIWGENIE */ |
| 7535 |
static int ipw2100_wx_get_genie(struct net_device *dev, |
| 7536 |
struct iw_request_info *info, |
| 7537 |
union iwreq_data *wrqu, char *extra) |
| 7538 |
{ |
| 7539 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7540 |
struct libipw_device *ieee = priv->ieee; |
| 7541 |
|
| 7542 |
if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) { |
| 7543 |
wrqu->data.length = 0; |
| 7544 |
return 0; |
| 7545 |
} |
| 7546 |
|
| 7547 |
if (wrqu->data.length < ieee->wpa_ie_len) |
| 7548 |
return -E2BIG; |
| 7549 |
|
| 7550 |
wrqu->data.length = ieee->wpa_ie_len; |
| 7551 |
memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len); |
| 7552 |
|
| 7553 |
return 0; |
| 7554 |
} |
| 7555 |
|
| 7556 |
/* SIOCSIWAUTH */ |
| 7557 |
static int ipw2100_wx_set_auth(struct net_device *dev, |
| 7558 |
struct iw_request_info *info, |
| 7559 |
union iwreq_data *wrqu, char *extra) |
| 7560 |
{ |
| 7561 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7562 |
struct libipw_device *ieee = priv->ieee; |
| 7563 |
struct iw_param *param = &wrqu->param; |
| 7564 |
struct libipw_crypt_data *crypt; |
| 7565 |
unsigned long flags; |
| 7566 |
int ret = 0; |
| 7567 |
|
| 7568 |
switch (param->flags & IW_AUTH_INDEX) { |
| 7569 |
case IW_AUTH_WPA_VERSION: |
| 7570 |
case IW_AUTH_CIPHER_PAIRWISE: |
| 7571 |
case IW_AUTH_CIPHER_GROUP: |
| 7572 |
case IW_AUTH_KEY_MGMT: |
| 7573 |
/* |
| 7574 |
* ipw2200 does not use these parameters |
| 7575 |
*/ |
| 7576 |
break; |
| 7577 |
|
| 7578 |
case IW_AUTH_TKIP_COUNTERMEASURES: |
| 7579 |
crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx]; |
| 7580 |
if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags) |
| 7581 |
break; |
| 7582 |
|
| 7583 |
flags = crypt->ops->get_flags(crypt->priv); |
| 7584 |
|
| 7585 |
if (param->value) |
| 7586 |
flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES; |
| 7587 |
else |
| 7588 |
flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES; |
| 7589 |
|
| 7590 |
crypt->ops->set_flags(flags, crypt->priv); |
| 7591 |
|
| 7592 |
break; |
| 7593 |
|
| 7594 |
case IW_AUTH_DROP_UNENCRYPTED:{ |
| 7595 |
/* HACK: |
| 7596 |
* |
| 7597 |
* wpa_supplicant calls set_wpa_enabled when the driver |
| 7598 |
* is loaded and unloaded, regardless of if WPA is being |
| 7599 |
* used. No other calls are made which can be used to |
| 7600 |
* determine if encryption will be used or not prior to |
| 7601 |
* association being expected. If encryption is not being |
| 7602 |
* used, drop_unencrypted is set to false, else true -- we |
| 7603 |
* can use this to determine if the CAP_PRIVACY_ON bit should |
| 7604 |
* be set. |
| 7605 |
*/ |
| 7606 |
struct libipw_security sec = { |
| 7607 |
.flags = SEC_ENABLED, |
| 7608 |
.enabled = param->value, |
| 7609 |
}; |
| 7610 |
priv->ieee->drop_unencrypted = param->value; |
| 7611 |
/* We only change SEC_LEVEL for open mode. Others |
| 7612 |
* are set by ipw_wpa_set_encryption. |
| 7613 |
*/ |
| 7614 |
if (!param->value) { |
| 7615 |
sec.flags |= SEC_LEVEL; |
| 7616 |
sec.level = SEC_LEVEL_0; |
| 7617 |
} else { |
| 7618 |
sec.flags |= SEC_LEVEL; |
| 7619 |
sec.level = SEC_LEVEL_1; |
| 7620 |
} |
| 7621 |
if (priv->ieee->set_security) |
| 7622 |
priv->ieee->set_security(priv->ieee->dev, &sec); |
| 7623 |
break; |
| 7624 |
} |
| 7625 |
|
| 7626 |
case IW_AUTH_80211_AUTH_ALG: |
| 7627 |
ret = ipw2100_wpa_set_auth_algs(priv, param->value); |
| 7628 |
break; |
| 7629 |
|
| 7630 |
case IW_AUTH_WPA_ENABLED: |
| 7631 |
ret = ipw2100_wpa_enable(priv, param->value); |
| 7632 |
break; |
| 7633 |
|
| 7634 |
case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
| 7635 |
ieee->ieee802_1x = param->value; |
| 7636 |
break; |
| 7637 |
|
| 7638 |
//case IW_AUTH_ROAMING_CONTROL: |
| 7639 |
case IW_AUTH_PRIVACY_INVOKED: |
| 7640 |
ieee->privacy_invoked = param->value; |
| 7641 |
break; |
| 7642 |
|
| 7643 |
default: |
| 7644 |
return -EOPNOTSUPP; |
| 7645 |
} |
| 7646 |
return ret; |
| 7647 |
} |
| 7648 |
|
| 7649 |
/* SIOCGIWAUTH */ |
| 7650 |
static int ipw2100_wx_get_auth(struct net_device *dev, |
| 7651 |
struct iw_request_info *info, |
| 7652 |
union iwreq_data *wrqu, char *extra) |
| 7653 |
{ |
| 7654 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7655 |
struct libipw_device *ieee = priv->ieee; |
| 7656 |
struct libipw_crypt_data *crypt; |
| 7657 |
struct iw_param *param = &wrqu->param; |
| 7658 |
|
| 7659 |
switch (param->flags & IW_AUTH_INDEX) { |
| 7660 |
case IW_AUTH_WPA_VERSION: |
| 7661 |
case IW_AUTH_CIPHER_PAIRWISE: |
| 7662 |
case IW_AUTH_CIPHER_GROUP: |
| 7663 |
case IW_AUTH_KEY_MGMT: |
| 7664 |
/* |
| 7665 |
* wpa_supplicant will control these internally |
| 7666 |
*/ |
| 7667 |
break; |
| 7668 |
|
| 7669 |
case IW_AUTH_TKIP_COUNTERMEASURES: |
| 7670 |
crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx]; |
| 7671 |
if (!crypt || !crypt->ops->get_flags) { |
| 7672 |
IPW_DEBUG_WARNING("Can't get TKIP countermeasures: " |
| 7673 |
"crypt not set!\n"); |
| 7674 |
break; |
| 7675 |
} |
| 7676 |
|
| 7677 |
param->value = (crypt->ops->get_flags(crypt->priv) & |
| 7678 |
IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0; |
| 7679 |
|
| 7680 |
break; |
| 7681 |
|
| 7682 |
case IW_AUTH_DROP_UNENCRYPTED: |
| 7683 |
param->value = ieee->drop_unencrypted; |
| 7684 |
break; |
| 7685 |
|
| 7686 |
case IW_AUTH_80211_AUTH_ALG: |
| 7687 |
param->value = priv->ieee->sec.auth_mode; |
| 7688 |
break; |
| 7689 |
|
| 7690 |
case IW_AUTH_WPA_ENABLED: |
| 7691 |
param->value = ieee->wpa_enabled; |
| 7692 |
break; |
| 7693 |
|
| 7694 |
case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
| 7695 |
param->value = ieee->ieee802_1x; |
| 7696 |
break; |
| 7697 |
|
| 7698 |
case IW_AUTH_ROAMING_CONTROL: |
| 7699 |
case IW_AUTH_PRIVACY_INVOKED: |
| 7700 |
param->value = ieee->privacy_invoked; |
| 7701 |
break; |
| 7702 |
|
| 7703 |
default: |
| 7704 |
return -EOPNOTSUPP; |
| 7705 |
} |
| 7706 |
return 0; |
| 7707 |
} |
| 7708 |
|
| 7709 |
/* SIOCSIWENCODEEXT */ |
| 7710 |
static int ipw2100_wx_set_encodeext(struct net_device *dev, |
| 7711 |
struct iw_request_info *info, |
| 7712 |
union iwreq_data *wrqu, char *extra) |
| 7713 |
{ |
| 7714 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7715 |
return libipw_wx_set_encodeext(priv->ieee, info, wrqu, extra); |
| 7716 |
} |
| 7717 |
|
| 7718 |
/* SIOCGIWENCODEEXT */ |
| 7719 |
static int ipw2100_wx_get_encodeext(struct net_device *dev, |
| 7720 |
struct iw_request_info *info, |
| 7721 |
union iwreq_data *wrqu, char *extra) |
| 7722 |
{ |
| 7723 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7724 |
return libipw_wx_get_encodeext(priv->ieee, info, wrqu, extra); |
| 7725 |
} |
| 7726 |
|
| 7727 |
/* SIOCSIWMLME */ |
| 7728 |
static int ipw2100_wx_set_mlme(struct net_device *dev, |
| 7729 |
struct iw_request_info *info, |
| 7730 |
union iwreq_data *wrqu, char *extra) |
| 7731 |
{ |
| 7732 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7733 |
struct iw_mlme *mlme = (struct iw_mlme *)extra; |
| 7734 |
|
| 7735 |
switch (mlme->cmd) { |
| 7736 |
case IW_MLME_DEAUTH: |
| 7737 |
// silently ignore |
| 7738 |
break; |
| 7739 |
|
| 7740 |
case IW_MLME_DISASSOC: |
| 7741 |
ipw2100_disassociate_bssid(priv); |
| 7742 |
break; |
| 7743 |
|
| 7744 |
default: |
| 7745 |
return -EOPNOTSUPP; |
| 7746 |
} |
| 7747 |
return 0; |
| 7748 |
} |
| 7749 |
|
| 7750 |
/* |
| 7751 |
* |
| 7752 |
* IWPRIV handlers |
| 7753 |
* |
| 7754 |
*/ |
| 7755 |
#ifdef CONFIG_IPW2100_MONITOR |
| 7756 |
static int ipw2100_wx_set_promisc(struct net_device *dev, |
| 7757 |
struct iw_request_info *info, |
| 7758 |
union iwreq_data *wrqu, char *extra) |
| 7759 |
{ |
| 7760 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7761 |
int *parms = (int *)extra; |
| 7762 |
int enable = (parms[0] > 0); |
| 7763 |
int err = 0; |
| 7764 |
|
| 7765 |
mutex_lock(&priv->action_mutex); |
| 7766 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7767 |
err = -EIO; |
| 7768 |
goto done; |
| 7769 |
} |
| 7770 |
|
| 7771 |
if (enable) { |
| 7772 |
if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
| 7773 |
err = ipw2100_set_channel(priv, parms[1], 0); |
| 7774 |
goto done; |
| 7775 |
} |
| 7776 |
priv->channel = parms[1]; |
| 7777 |
err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); |
| 7778 |
} else { |
| 7779 |
if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
| 7780 |
err = ipw2100_switch_mode(priv, priv->last_mode); |
| 7781 |
} |
| 7782 |
done: |
| 7783 |
mutex_unlock(&priv->action_mutex); |
| 7784 |
return err; |
| 7785 |
} |
| 7786 |
|
| 7787 |
static int ipw2100_wx_reset(struct net_device *dev, |
| 7788 |
struct iw_request_info *info, |
| 7789 |
union iwreq_data *wrqu, char *extra) |
| 7790 |
{ |
| 7791 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7792 |
if (priv->status & STATUS_INITIALIZED) |
| 7793 |
schedule_reset(priv); |
| 7794 |
return 0; |
| 7795 |
} |
| 7796 |
|
| 7797 |
#endif |
| 7798 |
|
| 7799 |
static int ipw2100_wx_set_powermode(struct net_device *dev, |
| 7800 |
struct iw_request_info *info, |
| 7801 |
union iwreq_data *wrqu, char *extra) |
| 7802 |
{ |
| 7803 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7804 |
int err = 0, mode = *(int *)extra; |
| 7805 |
|
| 7806 |
mutex_lock(&priv->action_mutex); |
| 7807 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7808 |
err = -EIO; |
| 7809 |
goto done; |
| 7810 |
} |
| 7811 |
|
| 7812 |
if ((mode < 0) || (mode > POWER_MODES)) |
| 7813 |
mode = IPW_POWER_AUTO; |
| 7814 |
|
| 7815 |
if (IPW_POWER_LEVEL(priv->power_mode) != mode) |
| 7816 |
err = ipw2100_set_power_mode(priv, mode); |
| 7817 |
done: |
| 7818 |
mutex_unlock(&priv->action_mutex); |
| 7819 |
return err; |
| 7820 |
} |
| 7821 |
|
| 7822 |
#define MAX_POWER_STRING 80 |
| 7823 |
static int ipw2100_wx_get_powermode(struct net_device *dev, |
| 7824 |
struct iw_request_info *info, |
| 7825 |
union iwreq_data *wrqu, char *extra) |
| 7826 |
{ |
| 7827 |
/* |
| 7828 |
* This can be called at any time. No action lock required |
| 7829 |
*/ |
| 7830 |
|
| 7831 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7832 |
int level = IPW_POWER_LEVEL(priv->power_mode); |
| 7833 |
s32 timeout, period; |
| 7834 |
|
| 7835 |
if (!(priv->power_mode & IPW_POWER_ENABLED)) { |
| 7836 |
snprintf(extra, MAX_POWER_STRING, |
| 7837 |
"Power save level: %d (Off)", level); |
| 7838 |
} else { |
| 7839 |
switch (level) { |
| 7840 |
case IPW_POWER_MODE_CAM: |
| 7841 |
snprintf(extra, MAX_POWER_STRING, |
| 7842 |
"Power save level: %d (None)", level); |
| 7843 |
break; |
| 7844 |
case IPW_POWER_AUTO: |
| 7845 |
snprintf(extra, MAX_POWER_STRING, |
| 7846 |
"Power save level: %d (Auto)", level); |
| 7847 |
break; |
| 7848 |
default: |
| 7849 |
timeout = timeout_duration[level - 1] / 1000; |
| 7850 |
period = period_duration[level - 1] / 1000; |
| 7851 |
snprintf(extra, MAX_POWER_STRING, |
| 7852 |
"Power save level: %d " |
| 7853 |
"(Timeout %dms, Period %dms)", |
| 7854 |
level, timeout, period); |
| 7855 |
} |
| 7856 |
} |
| 7857 |
|
| 7858 |
wrqu->data.length = strlen(extra) + 1; |
| 7859 |
|
| 7860 |
return 0; |
| 7861 |
} |
| 7862 |
|
| 7863 |
static int ipw2100_wx_set_preamble(struct net_device *dev, |
| 7864 |
struct iw_request_info *info, |
| 7865 |
union iwreq_data *wrqu, char *extra) |
| 7866 |
{ |
| 7867 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7868 |
int err, mode = *(int *)extra; |
| 7869 |
|
| 7870 |
mutex_lock(&priv->action_mutex); |
| 7871 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7872 |
err = -EIO; |
| 7873 |
goto done; |
| 7874 |
} |
| 7875 |
|
| 7876 |
if (mode == 1) |
| 7877 |
priv->config |= CFG_LONG_PREAMBLE; |
| 7878 |
else if (mode == 0) |
| 7879 |
priv->config &= ~CFG_LONG_PREAMBLE; |
| 7880 |
else { |
| 7881 |
err = -EINVAL; |
| 7882 |
goto done; |
| 7883 |
} |
| 7884 |
|
| 7885 |
err = ipw2100_system_config(priv, 0); |
| 7886 |
|
| 7887 |
done: |
| 7888 |
mutex_unlock(&priv->action_mutex); |
| 7889 |
return err; |
| 7890 |
} |
| 7891 |
|
| 7892 |
static int ipw2100_wx_get_preamble(struct net_device *dev, |
| 7893 |
struct iw_request_info *info, |
| 7894 |
union iwreq_data *wrqu, char *extra) |
| 7895 |
{ |
| 7896 |
/* |
| 7897 |
* This can be called at any time. No action lock required |
| 7898 |
*/ |
| 7899 |
|
| 7900 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7901 |
|
| 7902 |
if (priv->config & CFG_LONG_PREAMBLE) |
| 7903 |
snprintf(wrqu->name, IFNAMSIZ, "long (1)"); |
| 7904 |
else |
| 7905 |
snprintf(wrqu->name, IFNAMSIZ, "auto (0)"); |
| 7906 |
|
| 7907 |
return 0; |
| 7908 |
} |
| 7909 |
|
| 7910 |
#ifdef CONFIG_IPW2100_MONITOR |
| 7911 |
static int ipw2100_wx_set_crc_check(struct net_device *dev, |
| 7912 |
struct iw_request_info *info, |
| 7913 |
union iwreq_data *wrqu, char *extra) |
| 7914 |
{ |
| 7915 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7916 |
int err, mode = *(int *)extra; |
| 7917 |
|
| 7918 |
mutex_lock(&priv->action_mutex); |
| 7919 |
if (!(priv->status & STATUS_INITIALIZED)) { |
| 7920 |
err = -EIO; |
| 7921 |
goto done; |
| 7922 |
} |
| 7923 |
|
| 7924 |
if (mode == 1) |
| 7925 |
priv->config |= CFG_CRC_CHECK; |
| 7926 |
else if (mode == 0) |
| 7927 |
priv->config &= ~CFG_CRC_CHECK; |
| 7928 |
else { |
| 7929 |
err = -EINVAL; |
| 7930 |
goto done; |
| 7931 |
} |
| 7932 |
err = 0; |
| 7933 |
|
| 7934 |
done: |
| 7935 |
mutex_unlock(&priv->action_mutex); |
| 7936 |
return err; |
| 7937 |
} |
| 7938 |
|
| 7939 |
static int ipw2100_wx_get_crc_check(struct net_device *dev, |
| 7940 |
struct iw_request_info *info, |
| 7941 |
union iwreq_data *wrqu, char *extra) |
| 7942 |
{ |
| 7943 |
/* |
| 7944 |
* This can be called at any time. No action lock required |
| 7945 |
*/ |
| 7946 |
|
| 7947 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 7948 |
|
| 7949 |
if (priv->config & CFG_CRC_CHECK) |
| 7950 |
snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)"); |
| 7951 |
else |
| 7952 |
snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)"); |
| 7953 |
|
| 7954 |
return 0; |
| 7955 |
} |
| 7956 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 7957 |
|
| 7958 |
static iw_handler ipw2100_wx_handlers[] = { |
| 7959 |
IW_HANDLER(SIOCGIWNAME, ipw2100_wx_get_name), |
| 7960 |
IW_HANDLER(SIOCSIWFREQ, ipw2100_wx_set_freq), |
| 7961 |
IW_HANDLER(SIOCGIWFREQ, ipw2100_wx_get_freq), |
| 7962 |
IW_HANDLER(SIOCSIWMODE, ipw2100_wx_set_mode), |
| 7963 |
IW_HANDLER(SIOCGIWMODE, ipw2100_wx_get_mode), |
| 7964 |
IW_HANDLER(SIOCGIWRANGE, ipw2100_wx_get_range), |
| 7965 |
IW_HANDLER(SIOCSIWAP, ipw2100_wx_set_wap), |
| 7966 |
IW_HANDLER(SIOCGIWAP, ipw2100_wx_get_wap), |
| 7967 |
IW_HANDLER(SIOCSIWMLME, ipw2100_wx_set_mlme), |
| 7968 |
IW_HANDLER(SIOCSIWSCAN, ipw2100_wx_set_scan), |
| 7969 |
IW_HANDLER(SIOCGIWSCAN, ipw2100_wx_get_scan), |
| 7970 |
IW_HANDLER(SIOCSIWESSID, ipw2100_wx_set_essid), |
| 7971 |
IW_HANDLER(SIOCGIWESSID, ipw2100_wx_get_essid), |
| 7972 |
IW_HANDLER(SIOCSIWNICKN, ipw2100_wx_set_nick), |
| 7973 |
IW_HANDLER(SIOCGIWNICKN, ipw2100_wx_get_nick), |
| 7974 |
IW_HANDLER(SIOCSIWRATE, ipw2100_wx_set_rate), |
| 7975 |
IW_HANDLER(SIOCGIWRATE, ipw2100_wx_get_rate), |
| 7976 |
IW_HANDLER(SIOCSIWRTS, ipw2100_wx_set_rts), |
| 7977 |
IW_HANDLER(SIOCGIWRTS, ipw2100_wx_get_rts), |
| 7978 |
IW_HANDLER(SIOCSIWFRAG, ipw2100_wx_set_frag), |
| 7979 |
IW_HANDLER(SIOCGIWFRAG, ipw2100_wx_get_frag), |
| 7980 |
IW_HANDLER(SIOCSIWTXPOW, ipw2100_wx_set_txpow), |
| 7981 |
IW_HANDLER(SIOCGIWTXPOW, ipw2100_wx_get_txpow), |
| 7982 |
IW_HANDLER(SIOCSIWRETRY, ipw2100_wx_set_retry), |
| 7983 |
IW_HANDLER(SIOCGIWRETRY, ipw2100_wx_get_retry), |
| 7984 |
IW_HANDLER(SIOCSIWENCODE, ipw2100_wx_set_encode), |
| 7985 |
IW_HANDLER(SIOCGIWENCODE, ipw2100_wx_get_encode), |
| 7986 |
IW_HANDLER(SIOCSIWPOWER, ipw2100_wx_set_power), |
| 7987 |
IW_HANDLER(SIOCGIWPOWER, ipw2100_wx_get_power), |
| 7988 |
IW_HANDLER(SIOCSIWGENIE, ipw2100_wx_set_genie), |
| 7989 |
IW_HANDLER(SIOCGIWGENIE, ipw2100_wx_get_genie), |
| 7990 |
IW_HANDLER(SIOCSIWAUTH, ipw2100_wx_set_auth), |
| 7991 |
IW_HANDLER(SIOCGIWAUTH, ipw2100_wx_get_auth), |
| 7992 |
IW_HANDLER(SIOCSIWENCODEEXT, ipw2100_wx_set_encodeext), |
| 7993 |
IW_HANDLER(SIOCGIWENCODEEXT, ipw2100_wx_get_encodeext), |
| 7994 |
}; |
| 7995 |
|
| 7996 |
#define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV |
| 7997 |
#define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1 |
| 7998 |
#define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2 |
| 7999 |
#define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3 |
| 8000 |
#define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4 |
| 8001 |
#define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5 |
| 8002 |
#define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6 |
| 8003 |
#define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7 |
| 8004 |
|
| 8005 |
static const struct iw_priv_args ipw2100_private_args[] = { |
| 8006 |
|
| 8007 |
#ifdef CONFIG_IPW2100_MONITOR |
| 8008 |
{ |
| 8009 |
IPW2100_PRIV_SET_MONITOR, |
| 8010 |
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"}, |
| 8011 |
{ |
| 8012 |
IPW2100_PRIV_RESET, |
| 8013 |
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"}, |
| 8014 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 8015 |
|
| 8016 |
{ |
| 8017 |
IPW2100_PRIV_SET_POWER, |
| 8018 |
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"}, |
| 8019 |
{ |
| 8020 |
IPW2100_PRIV_GET_POWER, |
| 8021 |
0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, |
| 8022 |
"get_power"}, |
| 8023 |
{ |
| 8024 |
IPW2100_PRIV_SET_LONGPREAMBLE, |
| 8025 |
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"}, |
| 8026 |
{ |
| 8027 |
IPW2100_PRIV_GET_LONGPREAMBLE, |
| 8028 |
0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"}, |
| 8029 |
#ifdef CONFIG_IPW2100_MONITOR |
| 8030 |
{ |
| 8031 |
IPW2100_PRIV_SET_CRC_CHECK, |
| 8032 |
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"}, |
| 8033 |
{ |
| 8034 |
IPW2100_PRIV_GET_CRC_CHECK, |
| 8035 |
0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"}, |
| 8036 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 8037 |
}; |
| 8038 |
|
| 8039 |
static iw_handler ipw2100_private_handler[] = { |
| 8040 |
#ifdef CONFIG_IPW2100_MONITOR |
| 8041 |
ipw2100_wx_set_promisc, |
| 8042 |
ipw2100_wx_reset, |
| 8043 |
#else /* CONFIG_IPW2100_MONITOR */ |
| 8044 |
NULL, |
| 8045 |
NULL, |
| 8046 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 8047 |
ipw2100_wx_set_powermode, |
| 8048 |
ipw2100_wx_get_powermode, |
| 8049 |
ipw2100_wx_set_preamble, |
| 8050 |
ipw2100_wx_get_preamble, |
| 8051 |
#ifdef CONFIG_IPW2100_MONITOR |
| 8052 |
ipw2100_wx_set_crc_check, |
| 8053 |
ipw2100_wx_get_crc_check, |
| 8054 |
#else /* CONFIG_IPW2100_MONITOR */ |
| 8055 |
NULL, |
| 8056 |
NULL, |
| 8057 |
#endif /* CONFIG_IPW2100_MONITOR */ |
| 8058 |
}; |
| 8059 |
|
| 8060 |
/* |
| 8061 |
* Get wireless statistics. |
| 8062 |
* Called by /proc/net/wireless |
| 8063 |
* Also called by SIOCGIWSTATS |
| 8064 |
*/ |
| 8065 |
static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev) |
| 8066 |
{ |
| 8067 |
enum { |
| 8068 |
POOR = 30, |
| 8069 |
FAIR = 60, |
| 8070 |
GOOD = 80, |
| 8071 |
VERY_GOOD = 90, |
| 8072 |
EXCELLENT = 95, |
| 8073 |
PERFECT = 100 |
| 8074 |
}; |
| 8075 |
int rssi_qual; |
| 8076 |
int tx_qual; |
| 8077 |
int beacon_qual; |
| 8078 |
int quality; |
| 8079 |
|
| 8080 |
struct ipw2100_priv *priv = libipw_priv(dev); |
| 8081 |
struct iw_statistics *wstats; |
| 8082 |
u32 rssi, tx_retries, missed_beacons, tx_failures; |
| 8083 |
u32 ord_len = sizeof(u32); |
| 8084 |
|
| 8085 |
if (!priv) |
| 8086 |
return (struct iw_statistics *)NULL; |
| 8087 |
|
| 8088 |
wstats = &priv->wstats; |
| 8089 |
|
| 8090 |
/* if hw is disabled, then ipw2100_get_ordinal() can't be called. |
| 8091 |
* ipw2100_wx_wireless_stats seems to be called before fw is |
| 8092 |
* initialized. STATUS_ASSOCIATED will only be set if the hw is up |
| 8093 |
* and associated; if not associcated, the values are all meaningless |
| 8094 |
* anyway, so set them all to NULL and INVALID */ |
| 8095 |
if (!(priv->status & STATUS_ASSOCIATED)) { |
| 8096 |
wstats->miss.beacon = 0; |
| 8097 |
wstats->discard.retries = 0; |
| 8098 |
wstats->qual.qual = 0; |
| 8099 |
wstats->qual.level = 0; |
| 8100 |
wstats->qual.noise = 0; |
| 8101 |
wstats->qual.updated = 7; |
| 8102 |
wstats->qual.updated |= IW_QUAL_NOISE_INVALID | |
| 8103 |
IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID; |
| 8104 |
return wstats; |
| 8105 |
} |
| 8106 |
|
| 8107 |
if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS, |
| 8108 |
&missed_beacons, &ord_len)) |
| 8109 |
goto fail_get_ordinal; |
| 8110 |
|
| 8111 |
/* If we don't have a connection the quality and level is 0 */ |
| 8112 |
if (!(priv->status & STATUS_ASSOCIATED)) { |
| 8113 |
wstats->qual.qual = 0; |
| 8114 |
wstats->qual.level = 0; |
| 8115 |
} else { |
| 8116 |
if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR, |
| 8117 |
&rssi, &ord_len)) |
| 8118 |
goto fail_get_ordinal; |
| 8119 |
wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; |
| 8120 |
if (rssi < 10) |
| 8121 |
rssi_qual = rssi * POOR / 10; |
| 8122 |
else if (rssi < 15) |
| 8123 |
rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR; |
| 8124 |
else if (rssi < 20) |
| 8125 |
rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR; |
| 8126 |
else if (rssi < 30) |
| 8127 |
rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) / |
| 8128 |
10 + GOOD; |
| 8129 |
else |
| 8130 |
rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) / |
| 8131 |
10 + VERY_GOOD; |
| 8132 |
|
| 8133 |
if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES, |
| 8134 |
&tx_retries, &ord_len)) |
| 8135 |
goto fail_get_ordinal; |
| 8136 |
|
| 8137 |
if (tx_retries > 75) |
| 8138 |
tx_qual = (90 - tx_retries) * POOR / 15; |
| 8139 |
else if (tx_retries > 70) |
| 8140 |
tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR; |
| 8141 |
else if (tx_retries > 65) |
| 8142 |
tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR; |
| 8143 |
else if (tx_retries > 50) |
| 8144 |
tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) / |
| 8145 |
15 + GOOD; |
| 8146 |
else |
| 8147 |
tx_qual = (50 - tx_retries) * |
| 8148 |
(PERFECT - VERY_GOOD) / 50 + VERY_GOOD; |
| 8149 |
|
| 8150 |
if (missed_beacons > 50) |
| 8151 |
beacon_qual = (60 - missed_beacons) * POOR / 10; |
| 8152 |
else if (missed_beacons > 40) |
| 8153 |
beacon_qual = (50 - missed_beacons) * (FAIR - POOR) / |
| 8154 |
10 + POOR; |
| 8155 |
else if (missed_beacons > 32) |
| 8156 |
beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) / |
| 8157 |
18 + FAIR; |
| 8158 |
else if (missed_beacons > 20) |
| 8159 |
beacon_qual = (32 - missed_beacons) * |
| 8160 |
(VERY_GOOD - GOOD) / 20 + GOOD; |
| 8161 |
else |
| 8162 |
beacon_qual = (20 - missed_beacons) * |
| 8163 |
(PERFECT - VERY_GOOD) / 20 + VERY_GOOD; |
| 8164 |
|
| 8165 |
quality = min(tx_qual, rssi_qual); |
| 8166 |
quality = min(beacon_qual, quality); |
| 8167 |
|
| 8168 |
#ifdef CONFIG_IPW2100_DEBUG |
| 8169 |
if (beacon_qual == quality) |
| 8170 |
IPW_DEBUG_WX("Quality clamped by Missed Beacons\n"); |
| 8171 |
else if (tx_qual == quality) |
| 8172 |
IPW_DEBUG_WX("Quality clamped by Tx Retries\n"); |
| 8173 |
else if (quality != 100) |
| 8174 |
IPW_DEBUG_WX("Quality clamped by Signal Strength\n"); |
| 8175 |
else |
| 8176 |
IPW_DEBUG_WX("Quality not clamped.\n"); |
| 8177 |
#endif |
| 8178 |
|
| 8179 |
wstats->qual.qual = quality; |
| 8180 |
wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; |
| 8181 |
} |
| 8182 |
|
| 8183 |
wstats->qual.noise = 0; |
| 8184 |
wstats->qual.updated = 7; |
| 8185 |
wstats->qual.updated |= IW_QUAL_NOISE_INVALID; |
| 8186 |
|
| 8187 |
/* FIXME: this is percent and not a # */ |
| 8188 |
wstats->miss.beacon = missed_beacons; |
| 8189 |
|
| 8190 |
if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES, |
| 8191 |
&tx_failures, &ord_len)) |
| 8192 |
goto fail_get_ordinal; |
| 8193 |
wstats->discard.retries = tx_failures; |
| 8194 |
|
| 8195 |
return wstats; |
| 8196 |
|
| 8197 |
fail_get_ordinal: |
| 8198 |
IPW_DEBUG_WX("failed querying ordinals.\n"); |
| 8199 |
|
| 8200 |
return (struct iw_statistics *)NULL; |
| 8201 |
} |
| 8202 |
|
| 8203 |
static const struct iw_handler_def ipw2100_wx_handler_def = { |
| 8204 |
.standard = ipw2100_wx_handlers, |
| 8205 |
.num_standard = ARRAY_SIZE(ipw2100_wx_handlers), |
| 8206 |
.num_private = ARRAY_SIZE(ipw2100_private_handler), |
| 8207 |
.num_private_args = ARRAY_SIZE(ipw2100_private_args), |
| 8208 |
.private = (iw_handler *) ipw2100_private_handler, |
| 8209 |
.private_args = (struct iw_priv_args *)ipw2100_private_args, |
| 8210 |
.get_wireless_stats = ipw2100_wx_wireless_stats, |
| 8211 |
}; |
| 8212 |
|
| 8213 |
static void ipw2100_wx_event_work(struct work_struct *work) |
| 8214 |
{ |
| 8215 |
struct ipw2100_priv *priv = |
| 8216 |
container_of(work, struct ipw2100_priv, wx_event_work.work); |
| 8217 |
union iwreq_data wrqu; |
| 8218 |
unsigned int len = ETH_ALEN; |
| 8219 |
|
| 8220 |
if (priv->status & STATUS_STOPPING) |
| 8221 |
return; |
| 8222 |
|
| 8223 |
mutex_lock(&priv->action_mutex); |
| 8224 |
|
| 8225 |
IPW_DEBUG_WX("enter\n"); |
| 8226 |
|
| 8227 |
mutex_unlock(&priv->action_mutex); |
| 8228 |
|
| 8229 |
wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| 8230 |
|
| 8231 |
/* Fetch BSSID from the hardware */ |
| 8232 |
if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) || |
| 8233 |
priv->status & STATUS_RF_KILL_MASK || |
| 8234 |
ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, |
| 8235 |
&priv->bssid, &len)) { |
| 8236 |
eth_zero_addr(wrqu.ap_addr.sa_data); |
| 8237 |
} else { |
| 8238 |
/* We now have the BSSID, so can finish setting to the full |
| 8239 |
* associated state */ |
| 8240 |
memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN); |
| 8241 |
memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN); |
| 8242 |
priv->status &= ~STATUS_ASSOCIATING; |
| 8243 |
priv->status |= STATUS_ASSOCIATED; |
| 8244 |
netif_carrier_on(priv->net_dev); |
| 8245 |
netif_wake_queue(priv->net_dev); |
| 8246 |
} |
| 8247 |
|
| 8248 |
if (!(priv->status & STATUS_ASSOCIATED)) { |
| 8249 |
IPW_DEBUG_WX("Configuring ESSID\n"); |
| 8250 |
mutex_lock(&priv->action_mutex); |
| 8251 |
/* This is a disassociation event, so kick the firmware to |
| 8252 |
* look for another AP */ |
| 8253 |
if (priv->config & CFG_STATIC_ESSID) |
| 8254 |
ipw2100_set_essid(priv, priv->essid, priv->essid_len, |
| 8255 |
0); |
| 8256 |
else |
| 8257 |
ipw2100_set_essid(priv, NULL, 0, 0); |
| 8258 |
mutex_unlock(&priv->action_mutex); |
| 8259 |
} |
| 8260 |
|
| 8261 |
wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL); |
| 8262 |
} |
| 8263 |
|
| 8264 |
#define IPW2100_FW_MAJOR_VERSION 1 |
| 8265 |
#define IPW2100_FW_MINOR_VERSION 3 |
| 8266 |
|
| 8267 |
#define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8) |
| 8268 |
#define IPW2100_FW_MAJOR(x) (x & 0xff) |
| 8269 |
|
| 8270 |
#define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \ |
| 8271 |
IPW2100_FW_MAJOR_VERSION) |
| 8272 |
|
| 8273 |
#define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \ |
| 8274 |
"." __stringify(IPW2100_FW_MINOR_VERSION) |
| 8275 |
|
| 8276 |
#define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw" |
| 8277 |
|
| 8278 |
/* |
| 8279 |
|
| 8280 |
BINARY FIRMWARE HEADER FORMAT |
| 8281 |
|
| 8282 |
offset length desc |
| 8283 |
0 2 version |
| 8284 |
2 2 mode == 0:BSS,1:IBSS,2:MONITOR |
| 8285 |
4 4 fw_len |
| 8286 |
8 4 uc_len |
| 8287 |
C fw_len firmware data |
| 8288 |
12 + fw_len uc_len microcode data |
| 8289 |
|
| 8290 |
*/ |
| 8291 |
|
| 8292 |
struct ipw2100_fw_header { |
| 8293 |
short version; |
| 8294 |
short mode; |
| 8295 |
unsigned int fw_size; |
| 8296 |
unsigned int uc_size; |
| 8297 |
} __packed; |
| 8298 |
|
| 8299 |
static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw) |
| 8300 |
{ |
| 8301 |
struct ipw2100_fw_header *h = |
| 8302 |
(struct ipw2100_fw_header *)fw->fw_entry->data; |
| 8303 |
|
| 8304 |
if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) { |
| 8305 |
printk(KERN_WARNING DRV_NAME ": Firmware image not compatible " |
| 8306 |
"(detected version id of %u). " |
| 8307 |
"See Documentation/networking/device_drivers/wifi/intel/ipw2100.rst\n", |
| 8308 |
h->version); |
| 8309 |
return 1; |
| 8310 |
} |
| 8311 |
|
| 8312 |
fw->version = h->version; |
| 8313 |
fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header); |
| 8314 |
fw->fw.size = h->fw_size; |
| 8315 |
fw->uc.data = fw->fw.data + h->fw_size; |
| 8316 |
fw->uc.size = h->uc_size; |
| 8317 |
|
| 8318 |
return 0; |
| 8319 |
} |
| 8320 |
|
| 8321 |
static int ipw2100_get_firmware(struct ipw2100_priv *priv, |
| 8322 |
struct ipw2100_fw *fw) |
| 8323 |
{ |
| 8324 |
char *fw_name; |
| 8325 |
int rc; |
| 8326 |
|
| 8327 |
IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n", |
| 8328 |
priv->net_dev->name); |
| 8329 |
|
| 8330 |
switch (priv->ieee->iw_mode) { |
| 8331 |
case IW_MODE_ADHOC: |
| 8332 |
fw_name = IPW2100_FW_NAME("-i"); |
| 8333 |
break; |
| 8334 |
#ifdef CONFIG_IPW2100_MONITOR |
| 8335 |
case IW_MODE_MONITOR: |
| 8336 |
fw_name = IPW2100_FW_NAME("-p"); |
| 8337 |
break; |
| 8338 |
#endif |
| 8339 |
case IW_MODE_INFRA: |
| 8340 |
default: |
| 8341 |
fw_name = IPW2100_FW_NAME(""); |
| 8342 |
break; |
| 8343 |
} |
| 8344 |
|
| 8345 |
rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev); |
| 8346 |
|
| 8347 |
if (rc < 0) { |
| 8348 |
printk(KERN_ERR DRV_NAME ": " |
| 8349 |
"%s: Firmware '%s' not available or load failed.\n", |
| 8350 |
priv->net_dev->name, fw_name); |
| 8351 |
return rc; |
| 8352 |
} |
| 8353 |
IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data, |
| 8354 |
fw->fw_entry->size); |
| 8355 |
|
| 8356 |
ipw2100_mod_firmware_load(fw); |
| 8357 |
|
| 8358 |
return 0; |
| 8359 |
} |
| 8360 |
|
| 8361 |
MODULE_FIRMWARE(IPW2100_FW_NAME("-i")); |
| 8362 |
#ifdef CONFIG_IPW2100_MONITOR |
| 8363 |
MODULE_FIRMWARE(IPW2100_FW_NAME("-p")); |
| 8364 |
#endif |
| 8365 |
MODULE_FIRMWARE(IPW2100_FW_NAME("")); |
| 8366 |
|
| 8367 |
static void ipw2100_release_firmware(struct ipw2100_priv *priv, |
| 8368 |
struct ipw2100_fw *fw) |
| 8369 |
{ |
| 8370 |
fw->version = 0; |
| 8371 |
release_firmware(fw->fw_entry); |
| 8372 |
fw->fw_entry = NULL; |
| 8373 |
} |
| 8374 |
|
| 8375 |
static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, |
| 8376 |
size_t max) |
| 8377 |
{ |
| 8378 |
char ver[MAX_FW_VERSION_LEN]; |
| 8379 |
u32 len = MAX_FW_VERSION_LEN; |
| 8380 |
u32 tmp; |
| 8381 |
int i; |
| 8382 |
/* firmware version is an ascii string (max len of 14) */ |
| 8383 |
if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len)) |
| 8384 |
return -EIO; |
| 8385 |
tmp = max; |
| 8386 |
if (len >= max) |
| 8387 |
len = max - 1; |
| 8388 |
for (i = 0; i < len; i++) |
| 8389 |
buf[i] = ver[i]; |
| 8390 |
buf[i] = '\0'; |
| 8391 |
return tmp; |
| 8392 |
} |
| 8393 |
|
| 8394 |
/* |
| 8395 |
* On exit, the firmware will have been freed from the fw list |
| 8396 |
*/ |
| 8397 |
static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw) |
| 8398 |
{ |
| 8399 |
/* firmware is constructed of N contiguous entries, each entry is |
| 8400 |
* structured as: |
| 8401 |
* |
| 8402 |
* offset sie desc |
| 8403 |
* 0 4 address to write to |
| 8404 |
* 4 2 length of data run |
| 8405 |
* 6 length data |
| 8406 |
*/ |
| 8407 |
unsigned int addr; |
| 8408 |
unsigned short len; |
| 8409 |
|
| 8410 |
const unsigned char *firmware_data = fw->fw.data; |
| 8411 |
unsigned int firmware_data_left = fw->fw.size; |
| 8412 |
|
| 8413 |
while (firmware_data_left > 0) { |
| 8414 |
addr = *(u32 *) (firmware_data); |
| 8415 |
firmware_data += 4; |
| 8416 |
firmware_data_left -= 4; |
| 8417 |
|
| 8418 |
len = *(u16 *) (firmware_data); |
| 8419 |
firmware_data += 2; |
| 8420 |
firmware_data_left -= 2; |
| 8421 |
|
| 8422 |
if (len > 32) { |
| 8423 |
printk(KERN_ERR DRV_NAME ": " |
| 8424 |
"Invalid firmware run-length of %d bytes\n", |
| 8425 |
len); |
| 8426 |
return -EINVAL; |
| 8427 |
} |
| 8428 |
|
| 8429 |
write_nic_memory(priv->net_dev, addr, len, firmware_data); |
| 8430 |
firmware_data += len; |
| 8431 |
firmware_data_left -= len; |
| 8432 |
} |
| 8433 |
|
| 8434 |
return 0; |
| 8435 |
} |
| 8436 |
|
| 8437 |
struct symbol_alive_response { |
| 8438 |
u8 cmd_id; |
| 8439 |
u8 seq_num; |
| 8440 |
u8 ucode_rev; |
| 8441 |
u8 eeprom_valid; |
| 8442 |
u16 valid_flags; |
| 8443 |
u8 IEEE_addr[6]; |
| 8444 |
u16 flags; |
| 8445 |
u16 pcb_rev; |
| 8446 |
u16 clock_settle_time; // 1us LSB |
| 8447 |
u16 powerup_settle_time; // 1us LSB |
| 8448 |
u16 hop_settle_time; // 1us LSB |
| 8449 |
u8 date[3]; // month, day, year |
| 8450 |
u8 time[2]; // hours, minutes |
| 8451 |
u8 ucode_valid; |
| 8452 |
}; |
| 8453 |
|
| 8454 |
static int ipw2100_ucode_download(struct ipw2100_priv *priv, |
| 8455 |
struct ipw2100_fw *fw) |
| 8456 |
{ |
| 8457 |
struct net_device *dev = priv->net_dev; |
| 8458 |
const unsigned char *microcode_data = fw->uc.data; |
| 8459 |
unsigned int microcode_data_left = fw->uc.size; |
| 8460 |
void __iomem *reg = priv->ioaddr; |
| 8461 |
|
| 8462 |
struct symbol_alive_response response; |
| 8463 |
int i, j; |
| 8464 |
u8 data; |
| 8465 |
|
| 8466 |
/* Symbol control */ |
| 8467 |
write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); |
| 8468 |
readl(reg); |
| 8469 |
write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); |
| 8470 |
readl(reg); |
| 8471 |
|
| 8472 |
/* HW config */ |
| 8473 |
write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ |
| 8474 |
readl(reg); |
| 8475 |
write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */ |
| 8476 |
readl(reg); |
| 8477 |
|
| 8478 |
/* EN_CS_ACCESS bit to reset control store pointer */ |
| 8479 |
write_nic_byte(dev, 0x210000, 0x40); |
| 8480 |
readl(reg); |
| 8481 |
write_nic_byte(dev, 0x210000, 0x0); |
| 8482 |
readl(reg); |
| 8483 |
write_nic_byte(dev, 0x210000, 0x40); |
| 8484 |
readl(reg); |
| 8485 |
|
| 8486 |
/* copy microcode from buffer into Symbol */ |
| 8487 |
|
| 8488 |
while (microcode_data_left > 0) { |
| 8489 |
write_nic_byte(dev, 0x210010, *microcode_data++); |
| 8490 |
write_nic_byte(dev, 0x210010, *microcode_data++); |
| 8491 |
microcode_data_left -= 2; |
| 8492 |
} |
| 8493 |
|
| 8494 |
/* EN_CS_ACCESS bit to reset the control store pointer */ |
| 8495 |
write_nic_byte(dev, 0x210000, 0x0); |
| 8496 |
readl(reg); |
| 8497 |
|
| 8498 |
/* Enable System (Reg 0) |
| 8499 |
* first enable causes garbage in RX FIFO */ |
| 8500 |
write_nic_byte(dev, 0x210000, 0x0); |
| 8501 |
readl(reg); |
| 8502 |
write_nic_byte(dev, 0x210000, 0x80); |
| 8503 |
readl(reg); |
| 8504 |
|
| 8505 |
/* Reset External Baseband Reg */ |
| 8506 |
write_nic_word(dev, IPW2100_CONTROL_REG, 0x703); |
| 8507 |
readl(reg); |
| 8508 |
write_nic_word(dev, IPW2100_CONTROL_REG, 0x707); |
| 8509 |
readl(reg); |
| 8510 |
|
| 8511 |
/* HW Config (Reg 5) */ |
| 8512 |
write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 |
| 8513 |
readl(reg); |
| 8514 |
write_nic_byte(dev, 0x210014, 0x72); // fifo width =16 |
| 8515 |
readl(reg); |
| 8516 |
|
| 8517 |
/* Enable System (Reg 0) |
| 8518 |
* second enable should be OK */ |
| 8519 |
write_nic_byte(dev, 0x210000, 0x00); // clear enable system |
| 8520 |
readl(reg); |
| 8521 |
write_nic_byte(dev, 0x210000, 0x80); // set enable system |
| 8522 |
|
| 8523 |
/* check Symbol is enabled - upped this from 5 as it wasn't always |
| 8524 |
* catching the update */ |
| 8525 |
for (i = 0; i < 10; i++) { |
| 8526 |
udelay(10); |
| 8527 |
|
| 8528 |
/* check Dino is enabled bit */ |
| 8529 |
read_nic_byte(dev, 0x210000, &data); |
| 8530 |
if (data & 0x1) |
| 8531 |
break; |
| 8532 |
} |
| 8533 |
|
| 8534 |
if (i == 10) { |
| 8535 |
printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n", |
| 8536 |
dev->name); |
| 8537 |
return -EIO; |
| 8538 |
} |
| 8539 |
|
| 8540 |
/* Get Symbol alive response */ |
| 8541 |
for (i = 0; i < 30; i++) { |
| 8542 |
/* Read alive response structure */ |
| 8543 |
for (j = 0; |
| 8544 |
j < (sizeof(struct symbol_alive_response) >> 1); j++) |
| 8545 |
read_nic_word(dev, 0x210004, ((u16 *) & response) + j); |
| 8546 |
|
| 8547 |
if ((response.cmd_id == 1) && (response.ucode_valid == 0x1)) |
| 8548 |
break; |
| 8549 |
udelay(10); |
| 8550 |
} |
| 8551 |
|
| 8552 |
if (i == 30) { |
| 8553 |
printk(KERN_ERR DRV_NAME |
| 8554 |
": %s: No response from Symbol - hw not alive\n", |
| 8555 |
dev->name); |
| 8556 |
printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response)); |
| 8557 |
return -EIO; |
| 8558 |
} |
| 8559 |
|
| 8560 |
return 0; |
| 8561 |
} |