| 1 |
/* |
| 2 |
* Copyright (c) 2010 Broadcom Corporation |
| 3 |
* Copyright (c) 2013 Hauke Mehrtens <[email protected]> |
| 4 |
* |
| 5 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 6 |
* purpose with or without fee is hereby granted, provided that the above |
| 7 |
* copyright notice and this permission notice appear in all copies. |
| 8 |
* |
| 9 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 10 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 11 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| 12 |
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 13 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| 14 |
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| 15 |
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 16 |
*/ |
| 17 |
|
| 18 |
#define __UNDEF_NO_VERSION__ |
| 19 |
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 20 |
|
| 21 |
#include <linux/etherdevice.h> |
| 22 |
#include <linux/sched.h> |
| 23 |
#include <linux/firmware.h> |
| 24 |
#include <linux/interrupt.h> |
| 25 |
#include <linux/module.h> |
| 26 |
#include <linux/bcma/bcma.h> |
| 27 |
#include <linux/string_choices.h> |
| 28 |
#include <net/mac80211.h> |
| 29 |
#include <defs.h> |
| 30 |
#include "phy/phy_int.h" |
| 31 |
#include "d11.h" |
| 32 |
#include "channel.h" |
| 33 |
#include "scb.h" |
| 34 |
#include "pub.h" |
| 35 |
#include "ucode_loader.h" |
| 36 |
#include "mac80211_if.h" |
| 37 |
#include "main.h" |
| 38 |
#include "debug.h" |
| 39 |
#include "led.h" |
| 40 |
|
| 41 |
#define N_TX_QUEUES 4 /* #tx queues on mac80211<->driver interface */ |
| 42 |
#define BRCMS_FLUSH_TIMEOUT 500 /* msec */ |
| 43 |
|
| 44 |
/* Flags we support */ |
| 45 |
#define MAC_FILTERS (FIF_ALLMULTI | \ |
| 46 |
FIF_FCSFAIL | \ |
| 47 |
FIF_CONTROL | \ |
| 48 |
FIF_OTHER_BSS | \ |
| 49 |
FIF_BCN_PRBRESP_PROMISC | \ |
| 50 |
FIF_PSPOLL) |
| 51 |
|
| 52 |
#define CHAN2GHZ(channel, frequency, chflags) { \ |
| 53 |
.band = NL80211_BAND_2GHZ, \ |
| 54 |
.center_freq = (frequency), \ |
| 55 |
.hw_value = (channel), \ |
| 56 |
.flags = chflags, \ |
| 57 |
.max_antenna_gain = 0, \ |
| 58 |
.max_power = 19, \ |
| 59 |
} |
| 60 |
|
| 61 |
#define CHAN5GHZ(channel, chflags) { \ |
| 62 |
.band = NL80211_BAND_5GHZ, \ |
| 63 |
.center_freq = 5000 + 5*(channel), \ |
| 64 |
.hw_value = (channel), \ |
| 65 |
.flags = chflags, \ |
| 66 |
.max_antenna_gain = 0, \ |
| 67 |
.max_power = 21, \ |
| 68 |
} |
| 69 |
|
| 70 |
#define RATE(rate100m, _flags) { \ |
| 71 |
.bitrate = (rate100m), \ |
| 72 |
.flags = (_flags), \ |
| 73 |
.hw_value = (rate100m / 5), \ |
| 74 |
} |
| 75 |
|
| 76 |
struct firmware_hdr { |
| 77 |
__le32 offset; |
| 78 |
__le32 len; |
| 79 |
__le32 idx; |
| 80 |
}; |
| 81 |
|
| 82 |
static const char * const brcms_firmwares[MAX_FW_IMAGES] = { |
| 83 |
"brcm/bcm43xx", |
| 84 |
NULL |
| 85 |
}; |
| 86 |
|
| 87 |
static int n_adapters_found; |
| 88 |
|
| 89 |
MODULE_AUTHOR("Broadcom Corporation"); |
| 90 |
MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver."); |
| 91 |
MODULE_LICENSE("Dual BSD/GPL"); |
| 92 |
/* This needs to be adjusted when brcms_firmwares changes */ |
| 93 |
MODULE_FIRMWARE("brcm/bcm43xx-0.fw"); |
| 94 |
MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw"); |
| 95 |
|
| 96 |
/* recognized BCMA Core IDs */ |
| 97 |
static struct bcma_device_id brcms_coreid_table[] = { |
| 98 |
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS), |
| 99 |
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS), |
| 100 |
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS), |
| 101 |
{}, |
| 102 |
}; |
| 103 |
MODULE_DEVICE_TABLE(bcma, brcms_coreid_table); |
| 104 |
|
| 105 |
#if defined(CONFIG_BRCMDBG) |
| 106 |
/* |
| 107 |
* Module parameter for setting the debug message level. Available |
| 108 |
* flags are specified by the BRCM_DL_* macros in |
| 109 |
* drivers/net/wireless/brcm80211/include/defs.h. |
| 110 |
*/ |
| 111 |
module_param_named(debug, brcm_msg_level, uint, 0644); |
| 112 |
#endif |
| 113 |
|
| 114 |
static struct ieee80211_channel brcms_2ghz_chantable[] = { |
| 115 |
CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS), |
| 116 |
CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS), |
| 117 |
CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS), |
| 118 |
CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS), |
| 119 |
CHAN2GHZ(5, 2432, 0), |
| 120 |
CHAN2GHZ(6, 2437, 0), |
| 121 |
CHAN2GHZ(7, 2442, 0), |
| 122 |
CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS), |
| 123 |
CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS), |
| 124 |
CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS), |
| 125 |
CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS), |
| 126 |
CHAN2GHZ(12, 2467, |
| 127 |
IEEE80211_CHAN_NO_IR | |
| 128 |
IEEE80211_CHAN_NO_HT40PLUS), |
| 129 |
CHAN2GHZ(13, 2472, |
| 130 |
IEEE80211_CHAN_NO_IR | |
| 131 |
IEEE80211_CHAN_NO_HT40PLUS), |
| 132 |
CHAN2GHZ(14, 2484, |
| 133 |
IEEE80211_CHAN_NO_IR | |
| 134 |
IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS | |
| 135 |
IEEE80211_CHAN_NO_OFDM) |
| 136 |
}; |
| 137 |
|
| 138 |
static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = { |
| 139 |
/* UNII-1 */ |
| 140 |
CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS), |
| 141 |
CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS), |
| 142 |
CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS), |
| 143 |
CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS), |
| 144 |
/* UNII-2 */ |
| 145 |
CHAN5GHZ(52, |
| 146 |
IEEE80211_CHAN_RADAR | |
| 147 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), |
| 148 |
CHAN5GHZ(56, |
| 149 |
IEEE80211_CHAN_RADAR | |
| 150 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), |
| 151 |
CHAN5GHZ(60, |
| 152 |
IEEE80211_CHAN_RADAR | |
| 153 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), |
| 154 |
CHAN5GHZ(64, |
| 155 |
IEEE80211_CHAN_RADAR | |
| 156 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), |
| 157 |
/* MID */ |
| 158 |
CHAN5GHZ(100, |
| 159 |
IEEE80211_CHAN_RADAR | |
| 160 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), |
| 161 |
CHAN5GHZ(104, |
| 162 |
IEEE80211_CHAN_RADAR | |
| 163 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), |
| 164 |
CHAN5GHZ(108, |
| 165 |
IEEE80211_CHAN_RADAR | |
| 166 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), |
| 167 |
CHAN5GHZ(112, |
| 168 |
IEEE80211_CHAN_RADAR | |
| 169 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), |
| 170 |
CHAN5GHZ(116, |
| 171 |
IEEE80211_CHAN_RADAR | |
| 172 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), |
| 173 |
CHAN5GHZ(120, |
| 174 |
IEEE80211_CHAN_RADAR | |
| 175 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), |
| 176 |
CHAN5GHZ(124, |
| 177 |
IEEE80211_CHAN_RADAR | |
| 178 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), |
| 179 |
CHAN5GHZ(128, |
| 180 |
IEEE80211_CHAN_RADAR | |
| 181 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), |
| 182 |
CHAN5GHZ(132, |
| 183 |
IEEE80211_CHAN_RADAR | |
| 184 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), |
| 185 |
CHAN5GHZ(136, |
| 186 |
IEEE80211_CHAN_RADAR | |
| 187 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), |
| 188 |
CHAN5GHZ(140, |
| 189 |
IEEE80211_CHAN_RADAR | |
| 190 |
IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS | |
| 191 |
IEEE80211_CHAN_NO_HT40MINUS), |
| 192 |
/* UNII-3 */ |
| 193 |
CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS), |
| 194 |
CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS), |
| 195 |
CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS), |
| 196 |
CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS), |
| 197 |
CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) |
| 198 |
}; |
| 199 |
|
| 200 |
/* |
| 201 |
* The rate table is used for both 2.4G and 5G rates. The |
| 202 |
* latter being a subset as it does not support CCK rates. |
| 203 |
*/ |
| 204 |
static struct ieee80211_rate legacy_ratetable[] = { |
| 205 |
RATE(10, 0), |
| 206 |
RATE(20, IEEE80211_RATE_SHORT_PREAMBLE), |
| 207 |
RATE(55, IEEE80211_RATE_SHORT_PREAMBLE), |
| 208 |
RATE(110, IEEE80211_RATE_SHORT_PREAMBLE), |
| 209 |
RATE(60, 0), |
| 210 |
RATE(90, 0), |
| 211 |
RATE(120, 0), |
| 212 |
RATE(180, 0), |
| 213 |
RATE(240, 0), |
| 214 |
RATE(360, 0), |
| 215 |
RATE(480, 0), |
| 216 |
RATE(540, 0), |
| 217 |
}; |
| 218 |
|
| 219 |
static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = { |
| 220 |
.band = NL80211_BAND_2GHZ, |
| 221 |
.channels = brcms_2ghz_chantable, |
| 222 |
.n_channels = ARRAY_SIZE(brcms_2ghz_chantable), |
| 223 |
.bitrates = legacy_ratetable, |
| 224 |
.n_bitrates = ARRAY_SIZE(legacy_ratetable), |
| 225 |
.ht_cap = { |
| 226 |
/* from include/linux/ieee80211.h */ |
| 227 |
.cap = IEEE80211_HT_CAP_GRN_FLD | |
| 228 |
IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40, |
| 229 |
.ht_supported = true, |
| 230 |
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, |
| 231 |
.ampdu_density = AMPDU_DEF_MPDU_DENSITY, |
| 232 |
.mcs = { |
| 233 |
/* placeholders for now */ |
| 234 |
.rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0}, |
| 235 |
.rx_highest = cpu_to_le16(500), |
| 236 |
.tx_params = IEEE80211_HT_MCS_TX_DEFINED} |
| 237 |
} |
| 238 |
}; |
| 239 |
|
| 240 |
static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = { |
| 241 |
.band = NL80211_BAND_5GHZ, |
| 242 |
.channels = brcms_5ghz_nphy_chantable, |
| 243 |
.n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable), |
| 244 |
.bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET, |
| 245 |
.n_bitrates = ARRAY_SIZE(legacy_ratetable) - |
| 246 |
BRCMS_LEGACY_5G_RATE_OFFSET, |
| 247 |
.ht_cap = { |
| 248 |
.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | |
| 249 |
IEEE80211_HT_CAP_SGI_40, |
| 250 |
.ht_supported = true, |
| 251 |
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, |
| 252 |
.ampdu_density = AMPDU_DEF_MPDU_DENSITY, |
| 253 |
.mcs = { |
| 254 |
/* placeholders for now */ |
| 255 |
.rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0}, |
| 256 |
.rx_highest = cpu_to_le16(500), |
| 257 |
.tx_params = IEEE80211_HT_MCS_TX_DEFINED} |
| 258 |
} |
| 259 |
}; |
| 260 |
|
| 261 |
/* flags the given rate in rateset as requested */ |
| 262 |
static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br) |
| 263 |
{ |
| 264 |
u32 i; |
| 265 |
|
| 266 |
for (i = 0; i < rs->count; i++) { |
| 267 |
if (rate != (rs->rates[i] & 0x7f)) |
| 268 |
continue; |
| 269 |
|
| 270 |
if (is_br) |
| 271 |
rs->rates[i] |= BRCMS_RATE_FLAG; |
| 272 |
else |
| 273 |
rs->rates[i] &= BRCMS_RATE_MASK; |
| 274 |
return; |
| 275 |
} |
| 276 |
} |
| 277 |
|
| 278 |
/* |
| 279 |
* This function frees the WL per-device resources. |
| 280 |
* |
| 281 |
* This function frees resources owned by the WL device pointed to |
| 282 |
* by the wl parameter. |
| 283 |
* |
| 284 |
* precondition: can both be called locked and unlocked |
| 285 |
*/ |
| 286 |
static void brcms_free(struct brcms_info *wl) |
| 287 |
{ |
| 288 |
struct brcms_timer *t, *next; |
| 289 |
|
| 290 |
/* free ucode data */ |
| 291 |
if (wl->fw.fw_cnt) |
| 292 |
brcms_ucode_data_free(&wl->ucode); |
| 293 |
if (wl->irq) |
| 294 |
free_irq(wl->irq, wl); |
| 295 |
|
| 296 |
/* kill dpc */ |
| 297 |
tasklet_kill(&wl->tasklet); |
| 298 |
|
| 299 |
if (wl->pub) { |
| 300 |
brcms_debugfs_detach(wl->pub); |
| 301 |
brcms_c_module_unregister(wl->pub, "linux", wl); |
| 302 |
} |
| 303 |
|
| 304 |
/* free common resources */ |
| 305 |
if (wl->wlc) { |
| 306 |
brcms_c_detach(wl->wlc); |
| 307 |
wl->wlc = NULL; |
| 308 |
wl->pub = NULL; |
| 309 |
} |
| 310 |
|
| 311 |
/* virtual interface deletion is deferred so we cannot spinwait */ |
| 312 |
|
| 313 |
/* wait for all pending callbacks to complete */ |
| 314 |
while (atomic_read(&wl->callbacks) > 0) |
| 315 |
schedule(); |
| 316 |
|
| 317 |
/* free timers */ |
| 318 |
for (t = wl->timers; t; t = next) { |
| 319 |
next = t->next; |
| 320 |
#ifdef DEBUG |
| 321 |
kfree(t->name); |
| 322 |
#endif |
| 323 |
kfree(t); |
| 324 |
} |
| 325 |
} |
| 326 |
|
| 327 |
/* |
| 328 |
* called from both kernel as from this kernel module (error flow on attach) |
| 329 |
* precondition: perimeter lock is not acquired. |
| 330 |
*/ |
| 331 |
static void brcms_remove(struct bcma_device *pdev) |
| 332 |
{ |
| 333 |
struct ieee80211_hw *hw = bcma_get_drvdata(pdev); |
| 334 |
struct brcms_info *wl = hw->priv; |
| 335 |
|
| 336 |
if (wl->wlc) { |
| 337 |
brcms_led_unregister(wl); |
| 338 |
wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false); |
| 339 |
wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); |
| 340 |
ieee80211_unregister_hw(hw); |
| 341 |
} |
| 342 |
|
| 343 |
brcms_free(wl); |
| 344 |
|
| 345 |
bcma_set_drvdata(pdev, NULL); |
| 346 |
ieee80211_free_hw(hw); |
| 347 |
} |
| 348 |
|
| 349 |
/* |
| 350 |
* Precondition: Since this function is called in brcms_pci_probe() context, |
| 351 |
* no locking is required. |
| 352 |
*/ |
| 353 |
static void brcms_release_fw(struct brcms_info *wl) |
| 354 |
{ |
| 355 |
int i; |
| 356 |
for (i = 0; i < MAX_FW_IMAGES; i++) { |
| 357 |
release_firmware(wl->fw.fw_bin[i]); |
| 358 |
release_firmware(wl->fw.fw_hdr[i]); |
| 359 |
} |
| 360 |
} |
| 361 |
|
| 362 |
/* |
| 363 |
* Precondition: Since this function is called in brcms_pci_probe() context, |
| 364 |
* no locking is required. |
| 365 |
*/ |
| 366 |
static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev) |
| 367 |
{ |
| 368 |
int status; |
| 369 |
struct device *device = &pdev->dev; |
| 370 |
char fw_name[100]; |
| 371 |
int i; |
| 372 |
|
| 373 |
memset(&wl->fw, 0, sizeof(struct brcms_firmware)); |
| 374 |
for (i = 0; i < MAX_FW_IMAGES; i++) { |
| 375 |
if (brcms_firmwares[i] == NULL) |
| 376 |
break; |
| 377 |
sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i], |
| 378 |
UCODE_LOADER_API_VER); |
| 379 |
status = request_firmware(&wl->fw.fw_bin[i], fw_name, device); |
| 380 |
if (status) { |
| 381 |
wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", |
| 382 |
KBUILD_MODNAME, fw_name); |
| 383 |
return status; |
| 384 |
} |
| 385 |
sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i], |
| 386 |
UCODE_LOADER_API_VER); |
| 387 |
status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device); |
| 388 |
if (status) { |
| 389 |
wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", |
| 390 |
KBUILD_MODNAME, fw_name); |
| 391 |
return status; |
| 392 |
} |
| 393 |
wl->fw.hdr_num_entries[i] = |
| 394 |
wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr)); |
| 395 |
} |
| 396 |
wl->fw.fw_cnt = i; |
| 397 |
status = brcms_ucode_data_init(wl, &wl->ucode); |
| 398 |
brcms_release_fw(wl); |
| 399 |
return status; |
| 400 |
} |
| 401 |
|
| 402 |
static void brcms_ops_tx(struct ieee80211_hw *hw, |
| 403 |
struct ieee80211_tx_control *control, |
| 404 |
struct sk_buff *skb) |
| 405 |
{ |
| 406 |
struct brcms_info *wl = hw->priv; |
| 407 |
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); |
| 408 |
|
| 409 |
spin_lock_bh(&wl->lock); |
| 410 |
if (!wl->pub->up) { |
| 411 |
brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n"); |
| 412 |
kfree_skb(skb); |
| 413 |
goto done; |
| 414 |
} |
| 415 |
if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw)) |
| 416 |
tx_info->rate_driver_data[0] = control->sta; |
| 417 |
done: |
| 418 |
spin_unlock_bh(&wl->lock); |
| 419 |
} |
| 420 |
|
| 421 |
static int brcms_ops_start(struct ieee80211_hw *hw) |
| 422 |
{ |
| 423 |
struct brcms_info *wl = hw->priv; |
| 424 |
bool blocked; |
| 425 |
int err; |
| 426 |
|
| 427 |
if (!wl->ucode.bcm43xx_bomminor) { |
| 428 |
err = brcms_request_fw(wl, wl->wlc->hw->d11core); |
| 429 |
if (err) |
| 430 |
return -ENOENT; |
| 431 |
} |
| 432 |
|
| 433 |
ieee80211_wake_queues(hw); |
| 434 |
spin_lock_bh(&wl->lock); |
| 435 |
blocked = brcms_rfkill_set_hw_state(wl); |
| 436 |
spin_unlock_bh(&wl->lock); |
| 437 |
if (!blocked) |
| 438 |
wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); |
| 439 |
|
| 440 |
spin_lock_bh(&wl->lock); |
| 441 |
/* avoid acknowledging frames before a non-monitor device is added */ |
| 442 |
wl->mute_tx = true; |
| 443 |
|
| 444 |
if (!wl->pub->up) |
| 445 |
if (!blocked) |
| 446 |
err = brcms_up(wl); |
| 447 |
else |
| 448 |
err = -ERFKILL; |
| 449 |
else |
| 450 |
err = -ENODEV; |
| 451 |
spin_unlock_bh(&wl->lock); |
| 452 |
|
| 453 |
if (err != 0) |
| 454 |
brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n", |
| 455 |
__func__, err); |
| 456 |
|
| 457 |
bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true); |
| 458 |
return err; |
| 459 |
} |
| 460 |
|
| 461 |
static void brcms_ops_stop(struct ieee80211_hw *hw, bool suspend) |
| 462 |
{ |
| 463 |
struct brcms_info *wl = hw->priv; |
| 464 |
int status; |
| 465 |
|
| 466 |
ieee80211_stop_queues(hw); |
| 467 |
|
| 468 |
if (wl->wlc == NULL) |
| 469 |
return; |
| 470 |
|
| 471 |
spin_lock_bh(&wl->lock); |
| 472 |
status = brcms_c_chipmatch(wl->wlc->hw->d11core); |
| 473 |
spin_unlock_bh(&wl->lock); |
| 474 |
if (!status) { |
| 475 |
brcms_err(wl->wlc->hw->d11core, |
| 476 |
"wl: brcms_ops_stop: chipmatch failed\n"); |
| 477 |
return; |
| 478 |
} |
| 479 |
|
| 480 |
bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false); |
| 481 |
|
| 482 |
/* put driver in down state */ |
| 483 |
spin_lock_bh(&wl->lock); |
| 484 |
brcms_down(wl); |
| 485 |
spin_unlock_bh(&wl->lock); |
| 486 |
} |
| 487 |
|
| 488 |
static int |
| 489 |
brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) |
| 490 |
{ |
| 491 |
struct brcms_info *wl = hw->priv; |
| 492 |
|
| 493 |
/* Just STA, AP and ADHOC for now */ |
| 494 |
if (vif->type != NL80211_IFTYPE_STATION && |
| 495 |
vif->type != NL80211_IFTYPE_AP && |
| 496 |
vif->type != NL80211_IFTYPE_ADHOC) { |
| 497 |
brcms_err(wl->wlc->hw->d11core, |
| 498 |
"%s: Attempt to add type %d, only STA, AP and AdHoc for now\n", |
| 499 |
__func__, vif->type); |
| 500 |
return -EOPNOTSUPP; |
| 501 |
} |
| 502 |
|
| 503 |
spin_lock_bh(&wl->lock); |
| 504 |
wl->wlc->vif = vif; |
| 505 |
wl->mute_tx = false; |
| 506 |
brcms_c_mute(wl->wlc, false); |
| 507 |
if (vif->type == NL80211_IFTYPE_STATION) |
| 508 |
brcms_c_start_station(wl->wlc, vif->addr); |
| 509 |
else if (vif->type == NL80211_IFTYPE_AP) |
| 510 |
brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid, |
| 511 |
vif->cfg.ssid, vif->cfg.ssid_len); |
| 512 |
else if (vif->type == NL80211_IFTYPE_ADHOC) |
| 513 |
brcms_c_start_adhoc(wl->wlc, vif->addr); |
| 514 |
spin_unlock_bh(&wl->lock); |
| 515 |
|
| 516 |
return 0; |
| 517 |
} |
| 518 |
|
| 519 |
static void |
| 520 |
brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) |
| 521 |
{ |
| 522 |
struct brcms_info *wl = hw->priv; |
| 523 |
|
| 524 |
spin_lock_bh(&wl->lock); |
| 525 |
wl->wlc->vif = NULL; |
| 526 |
spin_unlock_bh(&wl->lock); |
| 527 |
} |
| 528 |
|
| 529 |
static int brcms_ops_config(struct ieee80211_hw *hw, int radio_idx, |
| 530 |
u32 changed) |
| 531 |
{ |
| 532 |
struct ieee80211_conf *conf = &hw->conf; |
| 533 |
struct brcms_info *wl = hw->priv; |
| 534 |
struct bcma_device *core = wl->wlc->hw->d11core; |
| 535 |
int err = 0; |
| 536 |
int new_int; |
| 537 |
|
| 538 |
spin_lock_bh(&wl->lock); |
| 539 |
if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { |
| 540 |
brcms_c_set_beacon_listen_interval(wl->wlc, |
| 541 |
conf->listen_interval); |
| 542 |
} |
| 543 |
if (changed & IEEE80211_CONF_CHANGE_MONITOR) |
| 544 |
brcms_dbg_info(core, "%s: change monitor mode: %s\n", __func__, |
| 545 |
str_true_false(conf->flags & |
| 546 |
IEEE80211_CONF_MONITOR)); |
| 547 |
if (changed & IEEE80211_CONF_CHANGE_PS) |
| 548 |
brcms_err(core, "%s: change power-save mode: %s (implement)\n", |
| 549 |
__func__, |
| 550 |
str_true_false(conf->flags & IEEE80211_CONF_PS)); |
| 551 |
|
| 552 |
if (changed & IEEE80211_CONF_CHANGE_POWER) { |
| 553 |
err = brcms_c_set_tx_power(wl->wlc, conf->power_level); |
| 554 |
if (err < 0) { |
| 555 |
brcms_err(core, "%s: Error setting power_level\n", |
| 556 |
__func__); |
| 557 |
goto config_out; |
| 558 |
} |
| 559 |
new_int = brcms_c_get_tx_power(wl->wlc); |
| 560 |
if (new_int != conf->power_level) |
| 561 |
brcms_err(core, |
| 562 |
"%s: Power level req != actual, %d %d\n", |
| 563 |
__func__, conf->power_level, |
| 564 |
new_int); |
| 565 |
} |
| 566 |
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { |
| 567 |
if (conf->chandef.width == NL80211_CHAN_WIDTH_20 || |
| 568 |
conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT) |
| 569 |
err = brcms_c_set_channel(wl->wlc, |
| 570 |
conf->chandef.chan->hw_value); |
| 571 |
else |
| 572 |
err = -ENOTSUPP; |
| 573 |
} |
| 574 |
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) |
| 575 |
err = brcms_c_set_rate_limit(wl->wlc, |
| 576 |
conf->short_frame_max_tx_count, |
| 577 |
conf->long_frame_max_tx_count); |
| 578 |
|
| 579 |
config_out: |
| 580 |
spin_unlock_bh(&wl->lock); |
| 581 |
return err; |
| 582 |
} |
| 583 |
|
| 584 |
static void |
| 585 |
brcms_ops_bss_info_changed(struct ieee80211_hw *hw, |
| 586 |
struct ieee80211_vif *vif, |
| 587 |
struct ieee80211_bss_conf *info, u64 changed) |
| 588 |
{ |
| 589 |
struct brcms_info *wl = hw->priv; |
| 590 |
struct bcma_device *core = wl->wlc->hw->d11core; |
| 591 |
|
| 592 |
if (changed & BSS_CHANGED_ASSOC) { |
| 593 |
/* association status changed (associated/disassociated) |
| 594 |
* also implies a change in the AID. |
| 595 |
*/ |
| 596 |
brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME, |
| 597 |
__func__, vif->cfg.assoc ? "" : "dis"); |
| 598 |
spin_lock_bh(&wl->lock); |
| 599 |
brcms_c_associate_upd(wl->wlc, vif->cfg.assoc); |
| 600 |
spin_unlock_bh(&wl->lock); |
| 601 |
} |
| 602 |
if (changed & BSS_CHANGED_ERP_SLOT) { |
| 603 |
s8 val; |
| 604 |
|
| 605 |
/* slot timing changed */ |
| 606 |
if (info->use_short_slot) |
| 607 |
val = 1; |
| 608 |
else |
| 609 |
val = 0; |
| 610 |
spin_lock_bh(&wl->lock); |
| 611 |
brcms_c_set_shortslot_override(wl->wlc, val); |
| 612 |
spin_unlock_bh(&wl->lock); |
| 613 |
} |
| 614 |
|
| 615 |
if (changed & BSS_CHANGED_HT) { |
| 616 |
/* 802.11n parameters changed */ |
| 617 |
u16 mode = info->ht_operation_mode; |
| 618 |
|
| 619 |
spin_lock_bh(&wl->lock); |
| 620 |
brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG, |
| 621 |
mode & IEEE80211_HT_OP_MODE_PROTECTION); |
| 622 |
brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF, |
| 623 |
mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); |
| 624 |
brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS, |
| 625 |
mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT); |
| 626 |
spin_unlock_bh(&wl->lock); |
| 627 |
} |
| 628 |
if (changed & BSS_CHANGED_BASIC_RATES) { |
| 629 |
struct ieee80211_supported_band *bi; |
| 630 |
u32 br_mask, i; |
| 631 |
u16 rate; |
| 632 |
struct brcm_rateset rs; |
| 633 |
int error; |
| 634 |
|
| 635 |
/* retrieve the current rates */ |
| 636 |
spin_lock_bh(&wl->lock); |
| 637 |
brcms_c_get_current_rateset(wl->wlc, &rs); |
| 638 |
spin_unlock_bh(&wl->lock); |
| 639 |
|
| 640 |
br_mask = info->basic_rates; |
| 641 |
bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)]; |
| 642 |
for (i = 0; i < bi->n_bitrates; i++) { |
| 643 |
/* convert to internal rate value */ |
| 644 |
rate = (bi->bitrates[i].bitrate << 1) / 10; |
| 645 |
|
| 646 |
/* set/clear basic rate flag */ |
| 647 |
brcms_set_basic_rate(&rs, rate, br_mask & 1); |
| 648 |
br_mask >>= 1; |
| 649 |
} |
| 650 |
|
| 651 |
/* update the rate set */ |
| 652 |
spin_lock_bh(&wl->lock); |
| 653 |
error = brcms_c_set_rateset(wl->wlc, &rs); |
| 654 |
spin_unlock_bh(&wl->lock); |
| 655 |
if (error) |
| 656 |
brcms_err(core, "changing basic rates failed: %d\n", |
| 657 |
error); |
| 658 |
} |
| 659 |
if (changed & BSS_CHANGED_BEACON_INT) { |
| 660 |
/* Beacon interval changed */ |
| 661 |
spin_lock_bh(&wl->lock); |
| 662 |
brcms_c_set_beacon_period(wl->wlc, info->beacon_int); |
| 663 |
spin_unlock_bh(&wl->lock); |
| 664 |
} |
| 665 |
if (changed & BSS_CHANGED_BSSID) { |
| 666 |
/* BSSID changed, for whatever reason (IBSS and managed mode) */ |
| 667 |
spin_lock_bh(&wl->lock); |
| 668 |
brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid); |
| 669 |
spin_unlock_bh(&wl->lock); |
| 670 |
} |
| 671 |
if (changed & BSS_CHANGED_SSID) { |
| 672 |
/* BSSID changed, for whatever reason (IBSS and managed mode) */ |
| 673 |
spin_lock_bh(&wl->lock); |
| 674 |
brcms_c_set_ssid(wl->wlc, vif->cfg.ssid, vif->cfg.ssid_len); |
| 675 |
spin_unlock_bh(&wl->lock); |
| 676 |
} |
| 677 |
if (changed & BSS_CHANGED_BEACON) { |
| 678 |
/* Beacon data changed, retrieve new beacon (beaconing modes) */ |
| 679 |
struct sk_buff *beacon; |
| 680 |
u16 tim_offset = 0; |
| 681 |
|
| 682 |
spin_lock_bh(&wl->lock); |
| 683 |
beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL, 0); |
| 684 |
brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset, |
| 685 |
info->dtim_period); |
| 686 |
spin_unlock_bh(&wl->lock); |
| 687 |
} |
| 688 |
|
| 689 |
if (changed & BSS_CHANGED_AP_PROBE_RESP) { |
| 690 |
struct sk_buff *probe_resp; |
| 691 |
|
| 692 |
spin_lock_bh(&wl->lock); |
| 693 |
probe_resp = ieee80211_proberesp_get(hw, vif); |
| 694 |
brcms_c_set_new_probe_resp(wl->wlc, probe_resp); |
| 695 |
spin_unlock_bh(&wl->lock); |
| 696 |
} |
| 697 |
|
| 698 |
if (changed & BSS_CHANGED_BEACON_ENABLED) { |
| 699 |
/* Beaconing should be enabled/disabled (beaconing modes) */ |
| 700 |
brcms_err(core, "%s: Beacon enabled: %s\n", __func__, |
| 701 |
str_true_false(info->enable_beacon)); |
| 702 |
if (info->enable_beacon && |
| 703 |
hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) { |
| 704 |
brcms_c_enable_probe_resp(wl->wlc, true); |
| 705 |
} else { |
| 706 |
brcms_c_enable_probe_resp(wl->wlc, false); |
| 707 |
} |
| 708 |
} |
| 709 |
|
| 710 |
if (changed & BSS_CHANGED_CQM) { |
| 711 |
/* Connection quality monitor config changed */ |
| 712 |
brcms_err(core, "%s: cqm change: threshold %d, hys %d " |
| 713 |
" (implement)\n", __func__, info->cqm_rssi_thold, |
| 714 |
info->cqm_rssi_hyst); |
| 715 |
} |
| 716 |
|
| 717 |
if (changed & BSS_CHANGED_IBSS) { |
| 718 |
/* IBSS join status changed */ |
| 719 |
brcms_err(core, "%s: IBSS joined: %s (implement)\n", |
| 720 |
__func__, str_true_false(vif->cfg.ibss_joined)); |
| 721 |
} |
| 722 |
|
| 723 |
if (changed & BSS_CHANGED_ARP_FILTER) { |
| 724 |
/* Hardware ARP filter address list or state changed */ |
| 725 |
brcms_err(core, "%s: arp filtering: %d addresses" |
| 726 |
" (implement)\n", __func__, vif->cfg.arp_addr_cnt); |
| 727 |
} |
| 728 |
|
| 729 |
if (changed & BSS_CHANGED_QOS) { |
| 730 |
/* |
| 731 |
* QoS for this association was enabled/disabled. |
| 732 |
* Note that it is only ever disabled for station mode. |
| 733 |
*/ |
| 734 |
brcms_err(core, "%s: qos enabled: %s (implement)\n", |
| 735 |
__func__, str_true_false(info->qos)); |
| 736 |
} |
| 737 |
return; |
| 738 |
} |
| 739 |
|
| 740 |
static void |
| 741 |
brcms_ops_configure_filter(struct ieee80211_hw *hw, |
| 742 |
unsigned int changed_flags, |
| 743 |
unsigned int *total_flags, u64 multicast) |
| 744 |
{ |
| 745 |
struct brcms_info *wl = hw->priv; |
| 746 |
struct bcma_device *core = wl->wlc->hw->d11core; |
| 747 |
|
| 748 |
changed_flags &= MAC_FILTERS; |
| 749 |
*total_flags &= MAC_FILTERS; |
| 750 |
|
| 751 |
if (changed_flags & FIF_ALLMULTI) |
| 752 |
brcms_dbg_info(core, "FIF_ALLMULTI\n"); |
| 753 |
if (changed_flags & FIF_FCSFAIL) |
| 754 |
brcms_dbg_info(core, "FIF_FCSFAIL\n"); |
| 755 |
if (changed_flags & FIF_CONTROL) |
| 756 |
brcms_dbg_info(core, "FIF_CONTROL\n"); |
| 757 |
if (changed_flags & FIF_OTHER_BSS) |
| 758 |
brcms_dbg_info(core, "FIF_OTHER_BSS\n"); |
| 759 |
if (changed_flags & FIF_PSPOLL) |
| 760 |
brcms_dbg_info(core, "FIF_PSPOLL\n"); |
| 761 |
if (changed_flags & FIF_BCN_PRBRESP_PROMISC) |
| 762 |
brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n"); |
| 763 |
|
| 764 |
spin_lock_bh(&wl->lock); |
| 765 |
brcms_c_mac_promisc(wl->wlc, *total_flags); |
| 766 |
spin_unlock_bh(&wl->lock); |
| 767 |
return; |
| 768 |
} |
| 769 |
|
| 770 |
static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw, |
| 771 |
struct ieee80211_vif *vif, |
| 772 |
const u8 *mac_addr) |
| 773 |
{ |
| 774 |
struct brcms_info *wl = hw->priv; |
| 775 |
spin_lock_bh(&wl->lock); |
| 776 |
brcms_c_scan_start(wl->wlc); |
| 777 |
spin_unlock_bh(&wl->lock); |
| 778 |
return; |
| 779 |
} |
| 780 |
|
| 781 |
static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw, |
| 782 |
struct ieee80211_vif *vif) |
| 783 |
{ |
| 784 |
struct brcms_info *wl = hw->priv; |
| 785 |
spin_lock_bh(&wl->lock); |
| 786 |
brcms_c_scan_stop(wl->wlc); |
| 787 |
spin_unlock_bh(&wl->lock); |
| 788 |
return; |
| 789 |
} |
| 790 |
|
| 791 |
static int |
| 792 |
brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| 793 |
unsigned int link_id, u16 queue, |
| 794 |
const struct ieee80211_tx_queue_params *params) |
| 795 |
{ |
| 796 |
struct brcms_info *wl = hw->priv; |
| 797 |
|
| 798 |
spin_lock_bh(&wl->lock); |
| 799 |
brcms_c_wme_setparams(wl->wlc, queue, params, true); |
| 800 |
spin_unlock_bh(&wl->lock); |
| 801 |
|
| 802 |
return 0; |
| 803 |
} |
| 804 |
|
| 805 |
static int |
| 806 |
brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| 807 |
struct ieee80211_sta *sta) |
| 808 |
{ |
| 809 |
struct brcms_info *wl = hw->priv; |
| 810 |
struct scb *scb = &wl->wlc->pri_scb; |
| 811 |
|
| 812 |
brcms_c_init_scb(scb); |
| 813 |
|
| 814 |
wl->pub->global_ampdu = &(scb->scb_ampdu); |
| 815 |
wl->pub->global_ampdu->max_pdu = 16; |
| 816 |
|
| 817 |
/* |
| 818 |
* minstrel_ht initiates addBA on our behalf by calling |
| 819 |
* ieee80211_start_tx_ba_session() |
| 820 |
*/ |
| 821 |
return 0; |
| 822 |
} |
| 823 |
|
| 824 |
static int |
| 825 |
brcms_ops_ampdu_action(struct ieee80211_hw *hw, |
| 826 |
struct ieee80211_vif *vif, |
| 827 |
struct ieee80211_ampdu_params *params) |
| 828 |
{ |
| 829 |
struct brcms_info *wl = hw->priv; |
| 830 |
struct scb *scb = &wl->wlc->pri_scb; |
| 831 |
int status; |
| 832 |
struct ieee80211_sta *sta = params->sta; |
| 833 |
enum ieee80211_ampdu_mlme_action action = params->action; |
| 834 |
u16 tid = params->tid; |
| 835 |
|
| 836 |
if (WARN_ON(scb->magic != SCB_MAGIC)) |
| 837 |
return -EIDRM; |
| 838 |
switch (action) { |
| 839 |
case IEEE80211_AMPDU_RX_START: |
| 840 |
break; |
| 841 |
case IEEE80211_AMPDU_RX_STOP: |
| 842 |
break; |
| 843 |
case IEEE80211_AMPDU_TX_START: |
| 844 |
spin_lock_bh(&wl->lock); |
| 845 |
status = brcms_c_aggregatable(wl->wlc, tid); |
| 846 |
spin_unlock_bh(&wl->lock); |
| 847 |
if (!status) { |
| 848 |
brcms_dbg_ht(wl->wlc->hw->d11core, |
| 849 |
"START: tid %d is not agg\'able\n", tid); |
| 850 |
return -EINVAL; |
| 851 |
} |
| 852 |
return IEEE80211_AMPDU_TX_START_IMMEDIATE; |
| 853 |
|
| 854 |
case IEEE80211_AMPDU_TX_STOP_CONT: |
| 855 |
case IEEE80211_AMPDU_TX_STOP_FLUSH: |
| 856 |
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: |
| 857 |
spin_lock_bh(&wl->lock); |
| 858 |
brcms_c_ampdu_flush(wl->wlc, sta, tid); |
| 859 |
spin_unlock_bh(&wl->lock); |
| 860 |
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); |
| 861 |
break; |
| 862 |
case IEEE80211_AMPDU_TX_OPERATIONAL: |
| 863 |
/* |
| 864 |
* BA window size from ADDBA response ('buf_size') defines how |
| 865 |
* many outstanding MPDUs are allowed for the BA stream by |
| 866 |
* recipient and traffic class (this is actually unused by the |
| 867 |
* rest of the driver). 'ampdu_factor' gives maximum AMPDU size. |
| 868 |
*/ |
| 869 |
spin_lock_bh(&wl->lock); |
| 870 |
brcms_c_ampdu_tx_operational(wl->wlc, tid, |
| 871 |
(1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + |
| 872 |
sta->deflink.ht_cap.ampdu_factor)) - 1); |
| 873 |
spin_unlock_bh(&wl->lock); |
| 874 |
/* Power save wakeup */ |
| 875 |
break; |
| 876 |
default: |
| 877 |
brcms_err(wl->wlc->hw->d11core, |
| 878 |
"%s: Invalid command, ignoring\n", __func__); |
| 879 |
} |
| 880 |
|
| 881 |
return 0; |
| 882 |
} |
| 883 |
|
| 884 |
static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw) |
| 885 |
{ |
| 886 |
struct brcms_info *wl = hw->priv; |
| 887 |
bool blocked; |
| 888 |
|
| 889 |
spin_lock_bh(&wl->lock); |
| 890 |
blocked = brcms_c_check_radio_disabled(wl->wlc); |
| 891 |
spin_unlock_bh(&wl->lock); |
| 892 |
|
| 893 |
wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked); |
| 894 |
} |
| 895 |
|
| 896 |
static bool brcms_tx_flush_completed(struct brcms_info *wl) |
| 897 |
{ |
| 898 |
bool result; |
| 899 |
|
| 900 |
spin_lock_bh(&wl->lock); |
| 901 |
result = brcms_c_tx_flush_completed(wl->wlc); |
| 902 |
spin_unlock_bh(&wl->lock); |
| 903 |
return result; |
| 904 |
} |
| 905 |
|
| 906 |
static void brcms_ops_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| 907 |
u32 queues, bool drop) |
| 908 |
{ |
| 909 |
struct brcms_info *wl = hw->priv; |
| 910 |
int ret; |
| 911 |
|
| 912 |
no_printk("%s: drop = %s\n", __func__, str_true_false(drop)); |
| 913 |
|
| 914 |
ret = wait_event_timeout(wl->tx_flush_wq, |
| 915 |
brcms_tx_flush_completed(wl), |
| 916 |
msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT)); |
| 917 |
|
| 918 |
brcms_dbg_mac80211(wl->wlc->hw->d11core, |
| 919 |
"ret=%d\n", jiffies_to_msecs(ret)); |
| 920 |
} |
| 921 |
|
| 922 |
static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) |
| 923 |
{ |
| 924 |
struct brcms_info *wl = hw->priv; |
| 925 |
u64 tsf; |
| 926 |
|
| 927 |
spin_lock_bh(&wl->lock); |
| 928 |
tsf = brcms_c_tsf_get(wl->wlc); |
| 929 |
spin_unlock_bh(&wl->lock); |
| 930 |
|
| 931 |
return tsf; |
| 932 |
} |
| 933 |
|
| 934 |
static void brcms_ops_set_tsf(struct ieee80211_hw *hw, |
| 935 |
struct ieee80211_vif *vif, u64 tsf) |
| 936 |
{ |
| 937 |
struct brcms_info *wl = hw->priv; |
| 938 |
|
| 939 |
spin_lock_bh(&wl->lock); |
| 940 |
brcms_c_tsf_set(wl->wlc, tsf); |
| 941 |
spin_unlock_bh(&wl->lock); |
| 942 |
} |
| 943 |
|
| 944 |
static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw, |
| 945 |
struct ieee80211_sta *sta, bool set) |
| 946 |
{ |
| 947 |
struct brcms_info *wl = hw->priv; |
| 948 |
struct sk_buff *beacon = NULL; |
| 949 |
u16 tim_offset = 0; |
| 950 |
|
| 951 |
spin_lock_bh(&wl->lock); |
| 952 |
if (wl->wlc->vif) |
| 953 |
beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif, |
| 954 |
&tim_offset, NULL, 0); |
| 955 |
if (beacon) |
| 956 |
brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset, |
| 957 |
wl->wlc->vif->bss_conf.dtim_period); |
| 958 |
spin_unlock_bh(&wl->lock); |
| 959 |
|
| 960 |
return 0; |
| 961 |
} |
| 962 |
|
| 963 |
static const struct ieee80211_ops brcms_ops = { |
| 964 |
.add_chanctx = ieee80211_emulate_add_chanctx, |
| 965 |
.remove_chanctx = ieee80211_emulate_remove_chanctx, |
| 966 |
.change_chanctx = ieee80211_emulate_change_chanctx, |
| 967 |
.switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx, |
| 968 |
.tx = brcms_ops_tx, |
| 969 |
.wake_tx_queue = ieee80211_handle_wake_tx_queue, |
| 970 |
.start = brcms_ops_start, |
| 971 |
.stop = brcms_ops_stop, |
| 972 |
.add_interface = brcms_ops_add_interface, |
| 973 |
.remove_interface = brcms_ops_remove_interface, |
| 974 |
.config = brcms_ops_config, |
| 975 |
.bss_info_changed = brcms_ops_bss_info_changed, |
| 976 |
.configure_filter = brcms_ops_configure_filter, |
| 977 |
.sw_scan_start = brcms_ops_sw_scan_start, |
| 978 |
.sw_scan_complete = brcms_ops_sw_scan_complete, |
| 979 |
.conf_tx = brcms_ops_conf_tx, |
| 980 |
.sta_add = brcms_ops_sta_add, |
| 981 |
.ampdu_action = brcms_ops_ampdu_action, |
| 982 |
.rfkill_poll = brcms_ops_rfkill_poll, |
| 983 |
.flush = brcms_ops_flush, |
| 984 |
.get_tsf = brcms_ops_get_tsf, |
| 985 |
.set_tsf = brcms_ops_set_tsf, |
| 986 |
.set_tim = brcms_ops_beacon_set_tim, |
| 987 |
}; |
| 988 |
|
| 989 |
void brcms_dpc(struct tasklet_struct *t) |
| 990 |
{ |
| 991 |
struct brcms_info *wl; |
| 992 |
|
| 993 |
wl = from_tasklet(wl, t, tasklet); |
| 994 |
|
| 995 |
spin_lock_bh(&wl->lock); |
| 996 |
|
| 997 |
/* call the common second level interrupt handler */ |
| 998 |
if (wl->pub->up) { |
| 999 |
if (wl->resched) { |
| 1000 |
unsigned long flags; |
| 1001 |
|
| 1002 |
spin_lock_irqsave(&wl->isr_lock, flags); |
| 1003 |
brcms_c_intrsupd(wl->wlc); |
| 1004 |
spin_unlock_irqrestore(&wl->isr_lock, flags); |
| 1005 |
} |
| 1006 |
|
| 1007 |
wl->resched = brcms_c_dpc(wl->wlc, true); |
| 1008 |
} |
| 1009 |
|
| 1010 |
/* brcms_c_dpc() may bring the driver down */ |
| 1011 |
if (!wl->pub->up) |
| 1012 |
goto done; |
| 1013 |
|
| 1014 |
/* re-schedule dpc */ |
| 1015 |
if (wl->resched) |
| 1016 |
tasklet_schedule(&wl->tasklet); |
| 1017 |
else |
| 1018 |
/* re-enable interrupts */ |
| 1019 |
brcms_intrson(wl); |
| 1020 |
|
| 1021 |
done: |
| 1022 |
spin_unlock_bh(&wl->lock); |
| 1023 |
wake_up(&wl->tx_flush_wq); |
| 1024 |
} |
| 1025 |
|
| 1026 |
static irqreturn_t brcms_isr(int irq, void *dev_id) |
| 1027 |
{ |
| 1028 |
struct brcms_info *wl; |
| 1029 |
irqreturn_t ret = IRQ_NONE; |
| 1030 |
|
| 1031 |
wl = (struct brcms_info *) dev_id; |
| 1032 |
|
| 1033 |
spin_lock(&wl->isr_lock); |
| 1034 |
|
| 1035 |
/* call common first level interrupt handler */ |
| 1036 |
if (brcms_c_isr(wl->wlc)) { |
| 1037 |
/* schedule second level handler */ |
| 1038 |
tasklet_schedule(&wl->tasklet); |
| 1039 |
ret = IRQ_HANDLED; |
| 1040 |
} |
| 1041 |
|
| 1042 |
spin_unlock(&wl->isr_lock); |
| 1043 |
|
| 1044 |
return ret; |
| 1045 |
} |
| 1046 |
|
| 1047 |
/* |
| 1048 |
* is called in brcms_pci_probe() context, therefore no locking required. |
| 1049 |
*/ |
| 1050 |
static int ieee_hw_rate_init(struct ieee80211_hw *hw) |
| 1051 |
{ |
| 1052 |
struct brcms_info *wl = hw->priv; |
| 1053 |
struct brcms_c_info *wlc = wl->wlc; |
| 1054 |
struct ieee80211_supported_band *band; |
| 1055 |
u16 phy_type; |
| 1056 |
|
| 1057 |
hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL; |
| 1058 |
hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL; |
| 1059 |
|
| 1060 |
phy_type = brcms_c_get_phy_type(wl->wlc, 0); |
| 1061 |
if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) { |
| 1062 |
band = &wlc->bandstate[BAND_2G_INDEX]->band; |
| 1063 |
*band = brcms_band_2GHz_nphy_template; |
| 1064 |
if (phy_type == PHY_TYPE_LCN) { |
| 1065 |
/* Single stream */ |
| 1066 |
band->ht_cap.mcs.rx_mask[1] = 0; |
| 1067 |
band->ht_cap.mcs.rx_highest = cpu_to_le16(72); |
| 1068 |
} |
| 1069 |
hw->wiphy->bands[NL80211_BAND_2GHZ] = band; |
| 1070 |
} else { |
| 1071 |
return -EPERM; |
| 1072 |
} |
| 1073 |
|
| 1074 |
/* Assume all bands use the same phy. True for 11n devices. */ |
| 1075 |
if (wl->pub->_nbands > 1) { |
| 1076 |
if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) { |
| 1077 |
band = &wlc->bandstate[BAND_5G_INDEX]->band; |
| 1078 |
*band = brcms_band_5GHz_nphy_template; |
| 1079 |
hw->wiphy->bands[NL80211_BAND_5GHZ] = band; |
| 1080 |
} else { |
| 1081 |
return -EPERM; |
| 1082 |
} |
| 1083 |
} |
| 1084 |
return 0; |
| 1085 |
} |
| 1086 |
|
| 1087 |
/* |
| 1088 |
* is called in brcms_pci_probe() context, therefore no locking required. |
| 1089 |
*/ |
| 1090 |
static int ieee_hw_init(struct ieee80211_hw *hw) |
| 1091 |
{ |
| 1092 |
ieee80211_hw_set(hw, AMPDU_AGGREGATION); |
| 1093 |
ieee80211_hw_set(hw, SIGNAL_DBM); |
| 1094 |
ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); |
| 1095 |
ieee80211_hw_set(hw, MFP_CAPABLE); |
| 1096 |
|
| 1097 |
hw->extra_tx_headroom = brcms_c_get_header_len(); |
| 1098 |
hw->queues = N_TX_QUEUES; |
| 1099 |
hw->max_rates = 2; /* Primary rate and 1 fallback rate */ |
| 1100 |
|
| 1101 |
/* channel change time is dependent on chip and band */ |
| 1102 |
hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | |
| 1103 |
BIT(NL80211_IFTYPE_AP) | |
| 1104 |
BIT(NL80211_IFTYPE_ADHOC); |
| 1105 |
|
| 1106 |
/* |
| 1107 |
* deactivate sending probe responses by ucude, because this will |
| 1108 |
* cause problems when WPS is used. |
| 1109 |
* |
| 1110 |
* hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; |
| 1111 |
*/ |
| 1112 |
|
| 1113 |
wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); |
| 1114 |
|
| 1115 |
hw->rate_control_algorithm = "minstrel_ht"; |
| 1116 |
|
| 1117 |
hw->sta_data_size = 0; |
| 1118 |
return ieee_hw_rate_init(hw); |
| 1119 |
} |
| 1120 |
|
| 1121 |
/* |
| 1122 |
* attach to the WL device. |
| 1123 |
* |
| 1124 |
* Attach to the WL device identified by vendor and device parameters. |
| 1125 |
* regs is a host accessible memory address pointing to WL device registers. |
| 1126 |
* |
| 1127 |
* is called in brcms_bcma_probe() context, therefore no locking required. |
| 1128 |
*/ |
| 1129 |
static struct brcms_info *brcms_attach(struct bcma_device *pdev) |
| 1130 |
{ |
| 1131 |
struct brcms_info *wl = NULL; |
| 1132 |
int unit, err; |
| 1133 |
struct ieee80211_hw *hw; |
| 1134 |
u8 perm[ETH_ALEN]; |
| 1135 |
|
| 1136 |
unit = n_adapters_found; |
| 1137 |
err = 0; |
| 1138 |
|
| 1139 |
if (unit < 0) |
| 1140 |
return NULL; |
| 1141 |
|
| 1142 |
/* allocate private info */ |
| 1143 |
hw = bcma_get_drvdata(pdev); |
| 1144 |
if (hw != NULL) |
| 1145 |
wl = hw->priv; |
| 1146 |
if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL)) |
| 1147 |
return NULL; |
| 1148 |
wl->wiphy = hw->wiphy; |
| 1149 |
|
| 1150 |
atomic_set(&wl->callbacks, 0); |
| 1151 |
|
| 1152 |
init_waitqueue_head(&wl->tx_flush_wq); |
| 1153 |
|
| 1154 |
/* setup the bottom half handler */ |
| 1155 |
tasklet_setup(&wl->tasklet, brcms_dpc); |
| 1156 |
|
| 1157 |
spin_lock_init(&wl->lock); |
| 1158 |
spin_lock_init(&wl->isr_lock); |
| 1159 |
|
| 1160 |
/* common load-time initialization */ |
| 1161 |
wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err); |
| 1162 |
if (!wl->wlc) { |
| 1163 |
wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n", |
| 1164 |
KBUILD_MODNAME, err); |
| 1165 |
goto fail; |
| 1166 |
} |
| 1167 |
wl->pub = brcms_c_pub(wl->wlc); |
| 1168 |
|
| 1169 |
wl->pub->ieee_hw = hw; |
| 1170 |
|
| 1171 |
/* register our interrupt handler */ |
| 1172 |
if (request_irq(pdev->irq, brcms_isr, |
| 1173 |
IRQF_SHARED, KBUILD_MODNAME, wl)) { |
| 1174 |
wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); |
| 1175 |
goto fail; |
| 1176 |
} |
| 1177 |
wl->irq = pdev->irq; |
| 1178 |
|
| 1179 |
/* register module */ |
| 1180 |
brcms_c_module_register(wl->pub, "linux", wl, NULL); |
| 1181 |
|
| 1182 |
if (ieee_hw_init(hw)) { |
| 1183 |
wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit, |
| 1184 |
__func__); |
| 1185 |
goto fail; |
| 1186 |
} |
| 1187 |
|
| 1188 |
brcms_c_regd_init(wl->wlc); |
| 1189 |
|
| 1190 |
memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN); |
| 1191 |
if (WARN_ON(!is_valid_ether_addr(perm))) |
| 1192 |
goto fail; |
| 1193 |
SET_IEEE80211_PERM_ADDR(hw, perm); |
| 1194 |
|
| 1195 |
err = ieee80211_register_hw(hw); |
| 1196 |
if (err) |
| 1197 |
wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status" |
| 1198 |
"%d\n", __func__, err); |
| 1199 |
|
| 1200 |
if (wl->pub->srom_ccode[0] && |
| 1201 |
regulatory_hint(wl->wiphy, wl->pub->srom_ccode)) |
| 1202 |
wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__); |
| 1203 |
|
| 1204 |
brcms_debugfs_attach(wl->pub); |
| 1205 |
brcms_debugfs_create_files(wl->pub); |
| 1206 |
n_adapters_found++; |
| 1207 |
return wl; |
| 1208 |
|
| 1209 |
fail: |
| 1210 |
brcms_free(wl); |
| 1211 |
return NULL; |
| 1212 |
} |
| 1213 |
|
| 1214 |
|
| 1215 |
|
| 1216 |
/* |
| 1217 |
* determines if a device is a WL device, and if so, attaches it. |
| 1218 |
* |
| 1219 |
* This function determines if a device pointed to by pdev is a WL device, |
| 1220 |
* and if so, performs a brcms_attach() on it. |
| 1221 |
* |
| 1222 |
* Perimeter lock is initialized in the course of this function. |
| 1223 |
*/ |
| 1224 |
static int brcms_bcma_probe(struct bcma_device *pdev) |
| 1225 |
{ |
| 1226 |
struct brcms_info *wl; |
| 1227 |
struct ieee80211_hw *hw; |
| 1228 |
int ret; |
| 1229 |
|
| 1230 |
dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", |
| 1231 |
pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, |
| 1232 |
pdev->irq); |
| 1233 |
|
| 1234 |
if ((pdev->id.manuf != BCMA_MANUF_BCM) || |
| 1235 |
(pdev->id.id != BCMA_CORE_80211)) |
| 1236 |
return -ENODEV; |
| 1237 |
|
| 1238 |
hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops); |
| 1239 |
if (!hw) { |
| 1240 |
pr_err("%s: ieee80211_alloc_hw failed\n", __func__); |
| 1241 |
return -ENOMEM; |
| 1242 |
} |
| 1243 |
|
| 1244 |
SET_IEEE80211_DEV(hw, &pdev->dev); |
| 1245 |
|
| 1246 |
bcma_set_drvdata(pdev, hw); |
| 1247 |
|
| 1248 |
memset(hw->priv, 0, sizeof(*wl)); |
| 1249 |
|
| 1250 |
wl = brcms_attach(pdev); |
| 1251 |
if (!wl) { |
| 1252 |
pr_err("%s: brcms_attach failed!\n", __func__); |
| 1253 |
ret = -ENODEV; |
| 1254 |
goto err_free_ieee80211; |
| 1255 |
} |
| 1256 |
brcms_led_register(wl); |
| 1257 |
|
| 1258 |
return 0; |
| 1259 |
|
| 1260 |
err_free_ieee80211: |
| 1261 |
ieee80211_free_hw(hw); |
| 1262 |
return ret; |
| 1263 |
} |
| 1264 |
|
| 1265 |
static int brcms_suspend(struct bcma_device *pdev) |
| 1266 |
{ |
| 1267 |
struct brcms_info *wl; |
| 1268 |
struct ieee80211_hw *hw; |
| 1269 |
|
| 1270 |
hw = bcma_get_drvdata(pdev); |
| 1271 |
wl = hw->priv; |
| 1272 |
if (!wl) { |
| 1273 |
pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME, |
| 1274 |
__func__); |
| 1275 |
return -ENODEV; |
| 1276 |
} |
| 1277 |
|
| 1278 |
/* only need to flag hw is down for proper resume */ |
| 1279 |
spin_lock_bh(&wl->lock); |
| 1280 |
wl->pub->hw_up = false; |
| 1281 |
spin_unlock_bh(&wl->lock); |
| 1282 |
|
| 1283 |
brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n"); |
| 1284 |
|
| 1285 |
return 0; |
| 1286 |
} |
| 1287 |
|
| 1288 |
static int brcms_resume(struct bcma_device *pdev) |
| 1289 |
{ |
| 1290 |
return 0; |
| 1291 |
} |
| 1292 |
|
| 1293 |
static struct bcma_driver brcms_bcma_driver = { |
| 1294 |
.name = KBUILD_MODNAME, |
| 1295 |
.probe = brcms_bcma_probe, |
| 1296 |
.suspend = brcms_suspend, |
| 1297 |
.resume = brcms_resume, |
| 1298 |
.remove = brcms_remove, |
| 1299 |
.id_table = brcms_coreid_table, |
| 1300 |
}; |
| 1301 |
|
| 1302 |
/* |
| 1303 |
* This is the main entry point for the brcmsmac driver. |
| 1304 |
* |
| 1305 |
* This function is scheduled upon module initialization and |
| 1306 |
* does the driver registration, which result in brcms_bcma_probe() |
| 1307 |
* call resulting in the driver bringup. |
| 1308 |
*/ |
| 1309 |
static void brcms_driver_init(struct work_struct *work) |
| 1310 |
{ |
| 1311 |
int error; |
| 1312 |
|
| 1313 |
error = bcma_driver_register(&brcms_bcma_driver); |
| 1314 |
if (error) |
| 1315 |
pr_err("%s: register returned %d\n", __func__, error); |
| 1316 |
} |
| 1317 |
|
| 1318 |
static DECLARE_WORK(brcms_driver_work, brcms_driver_init); |
| 1319 |
|
| 1320 |
static int __init brcms_module_init(void) |
| 1321 |
{ |
| 1322 |
brcms_debugfs_init(); |
| 1323 |
if (!schedule_work(&brcms_driver_work)) |
| 1324 |
return -EBUSY; |
| 1325 |
|
| 1326 |
return 0; |
| 1327 |
} |
| 1328 |
|
| 1329 |
/* |
| 1330 |
* This function unloads the brcmsmac driver from the system. |
| 1331 |
* |
| 1332 |
* This function unconditionally unloads the brcmsmac driver module from the |
| 1333 |
* system. |
| 1334 |
* |
| 1335 |
*/ |
| 1336 |
static void __exit brcms_module_exit(void) |
| 1337 |
{ |
| 1338 |
cancel_work_sync(&brcms_driver_work); |
| 1339 |
bcma_driver_unregister(&brcms_bcma_driver); |
| 1340 |
brcms_debugfs_exit(); |
| 1341 |
} |
| 1342 |
|
| 1343 |
module_init(brcms_module_init); |
| 1344 |
module_exit(brcms_module_exit); |
| 1345 |
|
| 1346 |
/* |
| 1347 |
* precondition: perimeter lock has been acquired |
| 1348 |
*/ |
| 1349 |
void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif, |
| 1350 |
bool state, int prio) |
| 1351 |
{ |
| 1352 |
brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__); |
| 1353 |
} |
| 1354 |
|
| 1355 |
/* |
| 1356 |
* precondition: perimeter lock has been acquired |
| 1357 |
*/ |
| 1358 |
void brcms_init(struct brcms_info *wl) |
| 1359 |
{ |
| 1360 |
brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n", |
| 1361 |
wl->pub->unit); |
| 1362 |
brcms_reset(wl); |
| 1363 |
brcms_c_init(wl->wlc, wl->mute_tx); |
| 1364 |
} |
| 1365 |
|
| 1366 |
/* |
| 1367 |
* precondition: perimeter lock has been acquired |
| 1368 |
*/ |
| 1369 |
uint brcms_reset(struct brcms_info *wl) |
| 1370 |
{ |
| 1371 |
brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit); |
| 1372 |
brcms_c_reset(wl->wlc); |
| 1373 |
|
| 1374 |
/* dpc will not be rescheduled */ |
| 1375 |
wl->resched = false; |
| 1376 |
|
| 1377 |
/* inform publicly that interface is down */ |
| 1378 |
wl->pub->up = false; |
| 1379 |
|
| 1380 |
return 0; |
| 1381 |
} |
| 1382 |
|
| 1383 |
void brcms_fatal_error(struct brcms_info *wl) |
| 1384 |
{ |
| 1385 |
brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n", |
| 1386 |
wl->wlc->pub->unit); |
| 1387 |
brcms_reset(wl); |
| 1388 |
ieee80211_restart_hw(wl->pub->ieee_hw); |
| 1389 |
} |
| 1390 |
|
| 1391 |
/* |
| 1392 |
* These are interrupt on/off entry points. Disable interrupts |
| 1393 |
* during interrupt state transition. |
| 1394 |
*/ |
| 1395 |
void brcms_intrson(struct brcms_info *wl) |
| 1396 |
{ |
| 1397 |
unsigned long flags; |
| 1398 |
|
| 1399 |
spin_lock_irqsave(&wl->isr_lock, flags); |
| 1400 |
brcms_c_intrson(wl->wlc); |
| 1401 |
spin_unlock_irqrestore(&wl->isr_lock, flags); |
| 1402 |
} |
| 1403 |
|
| 1404 |
u32 brcms_intrsoff(struct brcms_info *wl) |
| 1405 |
{ |
| 1406 |
unsigned long flags; |
| 1407 |
u32 status; |
| 1408 |
|
| 1409 |
spin_lock_irqsave(&wl->isr_lock, flags); |
| 1410 |
status = brcms_c_intrsoff(wl->wlc); |
| 1411 |
spin_unlock_irqrestore(&wl->isr_lock, flags); |
| 1412 |
return status; |
| 1413 |
} |
| 1414 |
|
| 1415 |
void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask) |
| 1416 |
{ |
| 1417 |
unsigned long flags; |
| 1418 |
|
| 1419 |
spin_lock_irqsave(&wl->isr_lock, flags); |
| 1420 |
brcms_c_intrsrestore(wl->wlc, macintmask); |
| 1421 |
spin_unlock_irqrestore(&wl->isr_lock, flags); |
| 1422 |
} |
| 1423 |
|
| 1424 |
/* |
| 1425 |
* precondition: perimeter lock has been acquired |
| 1426 |
*/ |
| 1427 |
int brcms_up(struct brcms_info *wl) |
| 1428 |
{ |
| 1429 |
int error = 0; |
| 1430 |
|
| 1431 |
if (wl->pub->up) |
| 1432 |
return 0; |
| 1433 |
|
| 1434 |
error = brcms_c_up(wl->wlc); |
| 1435 |
|
| 1436 |
return error; |
| 1437 |
} |
| 1438 |
|
| 1439 |
/* |
| 1440 |
* precondition: perimeter lock has been acquired |
| 1441 |
*/ |
| 1442 |
void brcms_down(struct brcms_info *wl) |
| 1443 |
__must_hold(&wl->lock) |
| 1444 |
{ |
| 1445 |
uint callbacks, ret_val = 0; |
| 1446 |
|
| 1447 |
/* call common down function */ |
| 1448 |
ret_val = brcms_c_down(wl->wlc); |
| 1449 |
callbacks = atomic_read(&wl->callbacks) - ret_val; |
| 1450 |
|
| 1451 |
/* wait for down callbacks to complete */ |
| 1452 |
spin_unlock_bh(&wl->lock); |
| 1453 |
|
| 1454 |
/* For HIGH_only driver, it's important to actually schedule other work, |
| 1455 |
* not just spin wait since everything runs at schedule level |
| 1456 |
*/ |
| 1457 |
SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000); |
| 1458 |
|
| 1459 |
spin_lock_bh(&wl->lock); |
| 1460 |
} |
| 1461 |
|
| 1462 |
/* |
| 1463 |
* precondition: perimeter lock is not acquired |
| 1464 |
*/ |
| 1465 |
static void _brcms_timer(struct work_struct *work) |
| 1466 |
{ |
| 1467 |
struct brcms_timer *t = container_of(work, struct brcms_timer, |
| 1468 |
dly_wrk.work); |
| 1469 |
|
| 1470 |
spin_lock_bh(&t->wl->lock); |
| 1471 |
|
| 1472 |
if (t->set) { |
| 1473 |
if (t->periodic) { |
| 1474 |
atomic_inc(&t->wl->callbacks); |
| 1475 |
ieee80211_queue_delayed_work(t->wl->pub->ieee_hw, |
| 1476 |
&t->dly_wrk, |
| 1477 |
msecs_to_jiffies(t->ms)); |
| 1478 |
} else { |
| 1479 |
t->set = false; |
| 1480 |
} |
| 1481 |
|
| 1482 |
t->fn(t->arg); |
| 1483 |
} |
| 1484 |
|
| 1485 |
atomic_dec(&t->wl->callbacks); |
| 1486 |
|
| 1487 |
spin_unlock_bh(&t->wl->lock); |
| 1488 |
} |
| 1489 |
|
| 1490 |
/* |
| 1491 |
* Adds a timer to the list. Caller supplies a timer function. |
| 1492 |
* Is called from wlc. |
| 1493 |
* |
| 1494 |
* precondition: perimeter lock has been acquired |
| 1495 |
*/ |
| 1496 |
struct brcms_timer *brcms_init_timer(struct brcms_info *wl, |
| 1497 |
void (*fn) (void *arg), |
| 1498 |
void *arg, const char *name) |
| 1499 |
{ |
| 1500 |
struct brcms_timer *t; |
| 1501 |
|
| 1502 |
t = kzalloc_obj(*t, GFP_ATOMIC); |
| 1503 |
if (!t) |
| 1504 |
return NULL; |
| 1505 |
|
| 1506 |
INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer); |
| 1507 |
t->wl = wl; |
| 1508 |
t->fn = fn; |
| 1509 |
t->arg = arg; |
| 1510 |
t->next = wl->timers; |
| 1511 |
wl->timers = t; |
| 1512 |
|
| 1513 |
#ifdef DEBUG |
| 1514 |
t->name = kstrdup(name, GFP_ATOMIC); |
| 1515 |
#endif |
| 1516 |
|
| 1517 |
return t; |
| 1518 |
} |
| 1519 |
|
| 1520 |
/* |
| 1521 |
* adds only the kernel timer since it's going to be more accurate |
| 1522 |
* as well as it's easier to make it periodic |
| 1523 |
* |
| 1524 |
* precondition: perimeter lock has been acquired |
| 1525 |
*/ |
| 1526 |
void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) |
| 1527 |
{ |
| 1528 |
struct ieee80211_hw *hw = t->wl->pub->ieee_hw; |
| 1529 |
|
| 1530 |
#ifdef DEBUG |
| 1531 |
if (t->set) |
| 1532 |
brcms_dbg_info(t->wl->wlc->hw->d11core, |
| 1533 |
"%s: Already set. Name: %s, per %d\n", |
| 1534 |
__func__, t->name, periodic); |
| 1535 |
#endif |
| 1536 |
t->ms = ms; |
| 1537 |
t->periodic = (bool) periodic; |
| 1538 |
if (!t->set) { |
| 1539 |
t->set = true; |
| 1540 |
atomic_inc(&t->wl->callbacks); |
| 1541 |
} |
| 1542 |
|
| 1543 |
ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); |
| 1544 |
} |
| 1545 |
|
| 1546 |
/* |
| 1547 |
* return true if timer successfully deleted, false if still pending |
| 1548 |
* |
| 1549 |
* precondition: perimeter lock has been acquired |
| 1550 |
*/ |
| 1551 |
bool brcms_del_timer(struct brcms_timer *t) |
| 1552 |
{ |
| 1553 |
if (t->set) { |
| 1554 |
t->set = false; |
| 1555 |
if (!cancel_delayed_work(&t->dly_wrk)) |
| 1556 |
return false; |
| 1557 |
|
| 1558 |
atomic_dec(&t->wl->callbacks); |
| 1559 |
} |
| 1560 |
|
| 1561 |
return true; |
| 1562 |
} |
| 1563 |
|
| 1564 |
/* |
| 1565 |
* precondition: perimeter lock has been acquired |
| 1566 |
*/ |
| 1567 |
void brcms_free_timer(struct brcms_timer *t) |
| 1568 |
{ |
| 1569 |
struct brcms_info *wl = t->wl; |
| 1570 |
struct brcms_timer *tmp; |
| 1571 |
|
| 1572 |
/* delete the timer in case it is active */ |
| 1573 |
brcms_del_timer(t); |
| 1574 |
|
| 1575 |
if (wl->timers == t) { |
| 1576 |
wl->timers = wl->timers->next; |
| 1577 |
#ifdef DEBUG |
| 1578 |
kfree(t->name); |
| 1579 |
#endif |
| 1580 |
kfree(t); |
| 1581 |
return; |
| 1582 |
|
| 1583 |
} |
| 1584 |
|
| 1585 |
tmp = wl->timers; |
| 1586 |
while (tmp) { |
| 1587 |
if (tmp->next == t) { |
| 1588 |
tmp->next = t->next; |
| 1589 |
#ifdef DEBUG |
| 1590 |
kfree(t->name); |
| 1591 |
#endif |
| 1592 |
kfree(t); |
| 1593 |
return; |
| 1594 |
} |
| 1595 |
tmp = tmp->next; |
| 1596 |
} |
| 1597 |
|
| 1598 |
} |
| 1599 |
|
| 1600 |
/* |
| 1601 |
* precondition: no locking required |
| 1602 |
*/ |
| 1603 |
int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx) |
| 1604 |
{ |
| 1605 |
int i, entry; |
| 1606 |
const u8 *pdata; |
| 1607 |
struct firmware_hdr *hdr; |
| 1608 |
for (i = 0; i < wl->fw.fw_cnt; i++) { |
| 1609 |
hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data; |
| 1610 |
for (entry = 0; entry < wl->fw.hdr_num_entries[i]; |
| 1611 |
entry++, hdr++) { |
| 1612 |
u32 len = le32_to_cpu(hdr->len); |
| 1613 |
if (le32_to_cpu(hdr->idx) == idx) { |
| 1614 |
pdata = wl->fw.fw_bin[i]->data + |
| 1615 |
le32_to_cpu(hdr->offset); |
| 1616 |
*pbuf = kvmemdup(pdata, len, GFP_KERNEL); |
| 1617 |
if (*pbuf == NULL) |
| 1618 |
return -ENOMEM; |
| 1619 |
return 0; |
| 1620 |
} |
| 1621 |
} |
| 1622 |
} |
| 1623 |
brcms_err(wl->wlc->hw->d11core, |
| 1624 |
"ERROR: ucode buf tag:%d can not be found!\n", idx); |
| 1625 |
*pbuf = NULL; |
| 1626 |
return -ENODATA; |
| 1627 |
} |
| 1628 |
|
| 1629 |
/* |
| 1630 |
* Precondition: Since this function is called in brcms_bcma_probe() context, |
| 1631 |
* no locking is required. |
| 1632 |
*/ |
| 1633 |
int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx) |
| 1634 |
{ |
| 1635 |
int i, entry; |
| 1636 |
const u8 *pdata; |
| 1637 |
struct firmware_hdr *hdr; |
| 1638 |
for (i = 0; i < wl->fw.fw_cnt; i++) { |
| 1639 |
hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data; |
| 1640 |
for (entry = 0; entry < wl->fw.hdr_num_entries[i]; |
| 1641 |
entry++, hdr++) { |
| 1642 |
if (le32_to_cpu(hdr->idx) == idx) { |
| 1643 |
pdata = wl->fw.fw_bin[i]->data + |
| 1644 |
le32_to_cpu(hdr->offset); |
| 1645 |
if (le32_to_cpu(hdr->len) != 4) { |
| 1646 |
brcms_err(wl->wlc->hw->d11core, |
| 1647 |
"ERROR: fw hdr len\n"); |
| 1648 |
return -ENOMSG; |
| 1649 |
} |
| 1650 |
*n_bytes = le32_to_cpu(*((__le32 *) pdata)); |
| 1651 |
return 0; |
| 1652 |
} |
| 1653 |
} |
| 1654 |
} |
| 1655 |
brcms_err(wl->wlc->hw->d11core, |
| 1656 |
"ERROR: ucode tag:%d can not be found!\n", idx); |
| 1657 |
return -ENOMSG; |
| 1658 |
} |
| 1659 |
|
| 1660 |
/* |
| 1661 |
* precondition: can both be called locked and unlocked |
| 1662 |
*/ |
| 1663 |
void brcms_ucode_free_buf(void *p) |
| 1664 |
{ |
| 1665 |
kvfree(p); |
| 1666 |
} |
| 1667 |
|
| 1668 |
/* |
| 1669 |
* checks validity of all firmware images loaded from user space |
| 1670 |
* |
| 1671 |
* Precondition: Since this function is called in brcms_bcma_probe() context, |
| 1672 |
* no locking is required. |
| 1673 |
*/ |
| 1674 |
int brcms_check_firmwares(struct brcms_info *wl) |
| 1675 |
{ |
| 1676 |
int i; |
| 1677 |
int entry; |
| 1678 |
int rc = 0; |
| 1679 |
const struct firmware *fw; |
| 1680 |
const struct firmware *fw_hdr; |
| 1681 |
struct firmware_hdr *ucode_hdr; |
| 1682 |
for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) { |
| 1683 |
fw = wl->fw.fw_bin[i]; |
| 1684 |
fw_hdr = wl->fw.fw_hdr[i]; |
| 1685 |
if (fw == NULL && fw_hdr == NULL) { |
| 1686 |
break; |
| 1687 |
} else if (fw == NULL || fw_hdr == NULL) { |
| 1688 |
wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n", |
| 1689 |
__func__); |
| 1690 |
rc = -EBADF; |
| 1691 |
} else if (fw_hdr->size % sizeof(struct firmware_hdr)) { |
| 1692 |
wiphy_err(wl->wiphy, "%s: non integral fw hdr file " |
| 1693 |
"size %zu/%zu\n", __func__, fw_hdr->size, |
| 1694 |
sizeof(struct firmware_hdr)); |
| 1695 |
rc = -EBADF; |
| 1696 |
} else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) { |
| 1697 |
wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n", |
| 1698 |
__func__, fw->size); |
| 1699 |
rc = -EBADF; |
| 1700 |
} else { |
| 1701 |
/* check if ucode section overruns firmware image */ |
| 1702 |
ucode_hdr = (struct firmware_hdr *)fw_hdr->data; |
| 1703 |
for (entry = 0; entry < wl->fw.hdr_num_entries[i] && |
| 1704 |
!rc; entry++, ucode_hdr++) { |
| 1705 |
if (le32_to_cpu(ucode_hdr->offset) + |
| 1706 |
le32_to_cpu(ucode_hdr->len) > |
| 1707 |
fw->size) { |
| 1708 |
wiphy_err(wl->wiphy, |
| 1709 |
"%s: conflicting bin/hdr\n", |
| 1710 |
__func__); |
| 1711 |
rc = -EBADF; |
| 1712 |
} |
| 1713 |
} |
| 1714 |
} |
| 1715 |
} |
| 1716 |
if (rc == 0 && wl->fw.fw_cnt != i) { |
| 1717 |
wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__, |
| 1718 |
wl->fw.fw_cnt); |
| 1719 |
rc = -EBADF; |
| 1720 |
} |
| 1721 |
return rc; |
| 1722 |
} |
| 1723 |
|
| 1724 |
/* |
| 1725 |
* precondition: perimeter lock has been acquired |
| 1726 |
*/ |
| 1727 |
bool brcms_rfkill_set_hw_state(struct brcms_info *wl) |
| 1728 |
__must_hold(&wl->lock) |
| 1729 |
{ |
| 1730 |
bool blocked = brcms_c_check_radio_disabled(wl->wlc); |
| 1731 |
|
| 1732 |
spin_unlock_bh(&wl->lock); |
| 1733 |
wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked); |
| 1734 |
if (blocked) |
| 1735 |
wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy); |
| 1736 |
spin_lock_bh(&wl->lock); |
| 1737 |
return blocked; |
| 1738 |
} |