| 1 |
// SPDX-License-Identifier: ISC |
| 2 |
/* |
| 3 |
* Copyright (c) 2010 Broadcom Corporation |
| 4 |
*/ |
| 5 |
|
| 6 |
/* Toplevel file. Relies on dhd_linux.c to send commands to the dongle. */ |
| 7 |
|
| 8 |
#include <linux/kernel.h> |
| 9 |
#include <linux/etherdevice.h> |
| 10 |
#include <linux/module.h> |
| 11 |
#include <linux/vmalloc.h> |
| 12 |
#include <net/cfg80211.h> |
| 13 |
#include <net/netlink.h> |
| 14 |
#include <uapi/linux/if_arp.h> |
| 15 |
|
| 16 |
#include <brcmu_utils.h> |
| 17 |
#include <defs.h> |
| 18 |
#include <brcmu_wifi.h> |
| 19 |
#include <brcm_hw_ids.h> |
| 20 |
#include "core.h" |
| 21 |
#include "debug.h" |
| 22 |
#include "tracepoint.h" |
| 23 |
#include "fwil_types.h" |
| 24 |
#include "p2p.h" |
| 25 |
#include "btcoex.h" |
| 26 |
#include "pno.h" |
| 27 |
#include "fwsignal.h" |
| 28 |
#include "cfg80211.h" |
| 29 |
#include "feature.h" |
| 30 |
#include "fwil.h" |
| 31 |
#include "proto.h" |
| 32 |
#include "vendor.h" |
| 33 |
#include "bus.h" |
| 34 |
#include "common.h" |
| 35 |
#include "fwvid.h" |
| 36 |
|
| 37 |
#define BRCMF_SCAN_IE_LEN_MAX 2048 |
| 38 |
|
| 39 |
#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */ |
| 40 |
#define WPA_OUI_TYPE 1 |
| 41 |
#define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */ |
| 42 |
#define WME_OUI_TYPE 2 |
| 43 |
#define WPS_OUI_TYPE 4 |
| 44 |
|
| 45 |
#define VS_IE_FIXED_HDR_LEN 6 |
| 46 |
#define WPA_IE_VERSION_LEN 2 |
| 47 |
#define WPA_IE_MIN_OUI_LEN 4 |
| 48 |
#define WPA_IE_SUITE_COUNT_LEN 2 |
| 49 |
|
| 50 |
#define WPA_CIPHER_NONE 0 /* None */ |
| 51 |
#define WPA_CIPHER_WEP_40 1 /* WEP (40-bit) */ |
| 52 |
#define WPA_CIPHER_TKIP 2 /* TKIP: default for WPA */ |
| 53 |
#define WPA_CIPHER_AES_CCM 4 /* AES (CCM) */ |
| 54 |
#define WPA_CIPHER_WEP_104 5 /* WEP (104-bit) */ |
| 55 |
|
| 56 |
#define RSN_AKM_NONE 0 /* None (IBSS) */ |
| 57 |
#define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */ |
| 58 |
#define RSN_AKM_PSK 2 /* Pre-shared Key */ |
| 59 |
#define RSN_AKM_SHA256_1X 5 /* SHA256, 802.1X */ |
| 60 |
#define RSN_AKM_SHA256_PSK 6 /* SHA256, Pre-shared Key */ |
| 61 |
#define RSN_AKM_SAE 8 /* SAE */ |
| 62 |
#define RSN_CAP_LEN 2 /* Length of RSN capabilities */ |
| 63 |
#define RSN_CAP_PTK_REPLAY_CNTR_MASK (BIT(2) | BIT(3)) |
| 64 |
#define RSN_CAP_MFPR_MASK BIT(6) |
| 65 |
#define RSN_CAP_MFPC_MASK BIT(7) |
| 66 |
#define RSN_PMKID_COUNT_LEN 2 |
| 67 |
|
| 68 |
#define VNDR_IE_CMD_LEN 4 /* length of the set command |
| 69 |
* string :"add", "del" (+ NUL) |
| 70 |
*/ |
| 71 |
#define VNDR_IE_COUNT_OFFSET 4 |
| 72 |
#define VNDR_IE_PKTFLAG_OFFSET 8 |
| 73 |
#define VNDR_IE_VSIE_OFFSET 12 |
| 74 |
#define VNDR_IE_HDR_SIZE 12 |
| 75 |
#define VNDR_IE_PARSE_LIMIT 5 |
| 76 |
|
| 77 |
#define DOT11_BCN_PRB_FIXED_LEN 12 /* beacon/probe fixed length */ |
| 78 |
|
| 79 |
#define BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS 320 |
| 80 |
#define BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS 400 |
| 81 |
#define BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS 20 |
| 82 |
|
| 83 |
#define BRCMF_SCAN_CHANNEL_TIME 40 |
| 84 |
#define BRCMF_SCAN_UNASSOC_TIME 40 |
| 85 |
#define BRCMF_SCAN_PASSIVE_TIME 120 |
| 86 |
|
| 87 |
#define BRCMF_ND_INFO_TIMEOUT msecs_to_jiffies(2000) |
| 88 |
|
| 89 |
#define BRCMF_PS_MAX_TIMEOUT_MS 2000 |
| 90 |
|
| 91 |
/* Dump obss definitions */ |
| 92 |
#define ACS_MSRMNT_DELAY 80 |
| 93 |
#define CHAN_NOISE_DUMMY (-80) |
| 94 |
#define OBSS_TOKEN_IDX 15 |
| 95 |
#define IBSS_TOKEN_IDX 15 |
| 96 |
#define TX_TOKEN_IDX 14 |
| 97 |
#define CTG_TOKEN_IDX 13 |
| 98 |
#define PKT_TOKEN_IDX 15 |
| 99 |
#define IDLE_TOKEN_IDX 12 |
| 100 |
|
| 101 |
#define BRCMF_ASSOC_PARAMS_FIXED_SIZE \ |
| 102 |
(sizeof(struct brcmf_assoc_params_le) - sizeof(u16)) |
| 103 |
|
| 104 |
#define BRCMF_MAX_CHANSPEC_LIST \ |
| 105 |
(BRCMF_DCMD_MEDLEN / sizeof(__le32) - 1) |
| 106 |
|
| 107 |
struct brcmf_dump_survey { |
| 108 |
u32 obss; |
| 109 |
u32 ibss; |
| 110 |
u32 no_ctg; |
| 111 |
u32 no_pckt; |
| 112 |
u32 tx; |
| 113 |
u32 idle; |
| 114 |
}; |
| 115 |
|
| 116 |
struct cca_stats_n_flags { |
| 117 |
u32 msrmnt_time; /* Time for Measurement (msec) */ |
| 118 |
u32 msrmnt_done; /* flag set when measurement complete */ |
| 119 |
char buf[1]; |
| 120 |
}; |
| 121 |
|
| 122 |
struct cca_msrmnt_query { |
| 123 |
u32 msrmnt_query; |
| 124 |
u32 time_req; |
| 125 |
}; |
| 126 |
|
| 127 |
static bool check_vif_up(struct brcmf_cfg80211_vif *vif) |
| 128 |
{ |
| 129 |
if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state)) { |
| 130 |
brcmf_dbg(INFO, "device is not ready : status (%lu)\n", |
| 131 |
vif->sme_state); |
| 132 |
return false; |
| 133 |
} |
| 134 |
return true; |
| 135 |
} |
| 136 |
|
| 137 |
#define RATE_TO_BASE100KBPS(rate) (((rate) * 10) / 2) |
| 138 |
#define RATETAB_ENT(_rateid, _flags) \ |
| 139 |
{ \ |
| 140 |
.bitrate = RATE_TO_BASE100KBPS(_rateid), \ |
| 141 |
.hw_value = (_rateid), \ |
| 142 |
.flags = (_flags), \ |
| 143 |
} |
| 144 |
|
| 145 |
static struct ieee80211_rate __wl_rates[] = { |
| 146 |
RATETAB_ENT(BRCM_RATE_1M, 0), |
| 147 |
RATETAB_ENT(BRCM_RATE_2M, IEEE80211_RATE_SHORT_PREAMBLE), |
| 148 |
RATETAB_ENT(BRCM_RATE_5M5, IEEE80211_RATE_SHORT_PREAMBLE), |
| 149 |
RATETAB_ENT(BRCM_RATE_11M, IEEE80211_RATE_SHORT_PREAMBLE), |
| 150 |
RATETAB_ENT(BRCM_RATE_6M, 0), |
| 151 |
RATETAB_ENT(BRCM_RATE_9M, 0), |
| 152 |
RATETAB_ENT(BRCM_RATE_12M, 0), |
| 153 |
RATETAB_ENT(BRCM_RATE_18M, 0), |
| 154 |
RATETAB_ENT(BRCM_RATE_24M, 0), |
| 155 |
RATETAB_ENT(BRCM_RATE_36M, 0), |
| 156 |
RATETAB_ENT(BRCM_RATE_48M, 0), |
| 157 |
RATETAB_ENT(BRCM_RATE_54M, 0), |
| 158 |
}; |
| 159 |
|
| 160 |
#define wl_g_rates (__wl_rates + 0) |
| 161 |
#define wl_g_rates_size ARRAY_SIZE(__wl_rates) |
| 162 |
#define wl_a_rates (__wl_rates + 4) |
| 163 |
#define wl_a_rates_size (wl_g_rates_size - 4) |
| 164 |
|
| 165 |
#define CHAN2G(_channel, _freq) { \ |
| 166 |
.band = NL80211_BAND_2GHZ, \ |
| 167 |
.center_freq = (_freq), \ |
| 168 |
.hw_value = (_channel), \ |
| 169 |
.max_antenna_gain = 0, \ |
| 170 |
.max_power = 30, \ |
| 171 |
} |
| 172 |
|
| 173 |
#define CHAN5G(_channel) { \ |
| 174 |
.band = NL80211_BAND_5GHZ, \ |
| 175 |
.center_freq = 5000 + (5 * (_channel)), \ |
| 176 |
.hw_value = (_channel), \ |
| 177 |
.max_antenna_gain = 0, \ |
| 178 |
.max_power = 30, \ |
| 179 |
} |
| 180 |
|
| 181 |
static struct ieee80211_channel __wl_2ghz_channels[] = { |
| 182 |
CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427), |
| 183 |
CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447), |
| 184 |
CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467), |
| 185 |
CHAN2G(13, 2472), CHAN2G(14, 2484) |
| 186 |
}; |
| 187 |
|
| 188 |
static struct ieee80211_channel __wl_5ghz_channels[] = { |
| 189 |
CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42), |
| 190 |
CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56), |
| 191 |
CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108), |
| 192 |
CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128), |
| 193 |
CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149), |
| 194 |
CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165) |
| 195 |
}; |
| 196 |
|
| 197 |
/* Band templates duplicated per wiphy. The channel info |
| 198 |
* above is added to the band during setup. |
| 199 |
*/ |
| 200 |
static const struct ieee80211_supported_band __wl_band_2ghz = { |
| 201 |
.band = NL80211_BAND_2GHZ, |
| 202 |
.bitrates = wl_g_rates, |
| 203 |
.n_bitrates = wl_g_rates_size, |
| 204 |
}; |
| 205 |
|
| 206 |
static const struct ieee80211_supported_band __wl_band_5ghz = { |
| 207 |
.band = NL80211_BAND_5GHZ, |
| 208 |
.bitrates = wl_a_rates, |
| 209 |
.n_bitrates = wl_a_rates_size, |
| 210 |
}; |
| 211 |
|
| 212 |
/* This is to override regulatory domains defined in cfg80211 module (reg.c) |
| 213 |
* By default world regulatory domain defined in reg.c puts the flags |
| 214 |
* NL80211_RRF_NO_IR for 5GHz channels (for * 36..48 and 149..165). |
| 215 |
* With respect to these flags, wpa_supplicant doesn't * start p2p |
| 216 |
* operations on 5GHz channels. All the changes in world regulatory |
| 217 |
* domain are to be done here. |
| 218 |
*/ |
| 219 |
static const struct ieee80211_regdomain brcmf_regdom = { |
| 220 |
.n_reg_rules = 4, |
| 221 |
.alpha2 = "99", |
| 222 |
.reg_rules = { |
| 223 |
/* IEEE 802.11b/g, channels 1..11 */ |
| 224 |
REG_RULE(2412-10, 2472+10, 40, 6, 20, 0), |
| 225 |
/* If any */ |
| 226 |
/* IEEE 802.11 channel 14 - Only JP enables |
| 227 |
* this and for 802.11b only |
| 228 |
*/ |
| 229 |
REG_RULE(2484-10, 2484+10, 20, 6, 20, 0), |
| 230 |
/* IEEE 802.11a, channel 36..64 */ |
| 231 |
REG_RULE(5150-10, 5350+10, 160, 6, 20, 0), |
| 232 |
/* IEEE 802.11a, channel 100..165 */ |
| 233 |
REG_RULE(5470-10, 5850+10, 160, 6, 20, 0), } |
| 234 |
}; |
| 235 |
|
| 236 |
/* Note: brcmf_cipher_suites is an array of int defining which cipher suites |
| 237 |
* are supported. A pointer to this array and the number of entries is passed |
| 238 |
* on to upper layers. AES_CMAC defines whether or not the driver supports MFP. |
| 239 |
* So the cipher suite AES_CMAC has to be the last one in the array, and when |
| 240 |
* device does not support MFP then the number of suites will be decreased by 1 |
| 241 |
*/ |
| 242 |
static const u32 brcmf_cipher_suites[] = { |
| 243 |
WLAN_CIPHER_SUITE_WEP40, |
| 244 |
WLAN_CIPHER_SUITE_WEP104, |
| 245 |
WLAN_CIPHER_SUITE_TKIP, |
| 246 |
WLAN_CIPHER_SUITE_CCMP, |
| 247 |
/* Keep as last entry: */ |
| 248 |
WLAN_CIPHER_SUITE_AES_CMAC |
| 249 |
}; |
| 250 |
|
| 251 |
/* Vendor specific ie. id = 221, oui and type defines exact ie */ |
| 252 |
struct brcmf_vs_tlv { |
| 253 |
u8 id; |
| 254 |
u8 len; |
| 255 |
u8 oui[3]; |
| 256 |
u8 oui_type; |
| 257 |
}; |
| 258 |
|
| 259 |
struct parsed_vndr_ie_info { |
| 260 |
u8 *ie_ptr; |
| 261 |
u32 ie_len; /* total length including id & length field */ |
| 262 |
struct brcmf_vs_tlv vndrie; |
| 263 |
}; |
| 264 |
|
| 265 |
struct parsed_vndr_ies { |
| 266 |
u32 count; |
| 267 |
struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT]; |
| 268 |
}; |
| 269 |
|
| 270 |
#define WL_INTERFACE_CREATE_VER_1 1 |
| 271 |
#define WL_INTERFACE_CREATE_VER_2 2 |
| 272 |
#define WL_INTERFACE_CREATE_VER_3 3 |
| 273 |
#define WL_INTERFACE_CREATE_VER_MAX WL_INTERFACE_CREATE_VER_3 |
| 274 |
|
| 275 |
#define WL_INTERFACE_MAC_DONT_USE 0x0 |
| 276 |
#define WL_INTERFACE_MAC_USE 0x2 |
| 277 |
|
| 278 |
#define WL_INTERFACE_CREATE_STA 0x0 |
| 279 |
#define WL_INTERFACE_CREATE_AP 0x1 |
| 280 |
|
| 281 |
struct wl_interface_create_v1 { |
| 282 |
u16 ver; /* structure version */ |
| 283 |
u32 flags; /* flags for operation */ |
| 284 |
u8 mac_addr[ETH_ALEN]; /* MAC address */ |
| 285 |
u32 wlc_index; /* optional for wlc index */ |
| 286 |
}; |
| 287 |
|
| 288 |
struct wl_interface_create_v2 { |
| 289 |
u16 ver; /* structure version */ |
| 290 |
u8 pad1[2]; |
| 291 |
u32 flags; /* flags for operation */ |
| 292 |
u8 mac_addr[ETH_ALEN]; /* MAC address */ |
| 293 |
u8 iftype; /* type of interface created */ |
| 294 |
u8 pad2; |
| 295 |
u32 wlc_index; /* optional for wlc index */ |
| 296 |
}; |
| 297 |
|
| 298 |
struct wl_interface_create_v3 { |
| 299 |
u16 ver; /* structure version */ |
| 300 |
u16 len; /* length of structure + data */ |
| 301 |
u16 fixed_len; /* length of structure */ |
| 302 |
u8 iftype; /* type of interface created */ |
| 303 |
u8 wlc_index; /* optional for wlc index */ |
| 304 |
u32 flags; /* flags for operation */ |
| 305 |
u8 mac_addr[ETH_ALEN]; /* MAC address */ |
| 306 |
u8 bssid[ETH_ALEN]; /* optional for BSSID */ |
| 307 |
u8 if_index; /* interface index request */ |
| 308 |
u8 pad[3]; |
| 309 |
u8 data[]; /* Optional for specific data */ |
| 310 |
}; |
| 311 |
|
| 312 |
static u8 nl80211_band_to_fwil(enum nl80211_band band) |
| 313 |
{ |
| 314 |
switch (band) { |
| 315 |
case NL80211_BAND_2GHZ: |
| 316 |
return WLC_BAND_2G; |
| 317 |
case NL80211_BAND_5GHZ: |
| 318 |
return WLC_BAND_5G; |
| 319 |
default: |
| 320 |
WARN_ON(1); |
| 321 |
break; |
| 322 |
} |
| 323 |
return 0; |
| 324 |
} |
| 325 |
|
| 326 |
static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf, |
| 327 |
struct cfg80211_chan_def *ch) |
| 328 |
{ |
| 329 |
struct brcmu_chan ch_inf; |
| 330 |
s32 primary_offset; |
| 331 |
|
| 332 |
brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n", |
| 333 |
ch->chan->center_freq, ch->center_freq1, ch->width); |
| 334 |
ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1); |
| 335 |
primary_offset = ch->chan->center_freq - ch->center_freq1; |
| 336 |
switch (ch->width) { |
| 337 |
case NL80211_CHAN_WIDTH_20: |
| 338 |
case NL80211_CHAN_WIDTH_20_NOHT: |
| 339 |
ch_inf.bw = BRCMU_CHAN_BW_20; |
| 340 |
WARN_ON(primary_offset != 0); |
| 341 |
break; |
| 342 |
case NL80211_CHAN_WIDTH_40: |
| 343 |
ch_inf.bw = BRCMU_CHAN_BW_40; |
| 344 |
if (primary_offset > 0) |
| 345 |
ch_inf.sb = BRCMU_CHAN_SB_U; |
| 346 |
else |
| 347 |
ch_inf.sb = BRCMU_CHAN_SB_L; |
| 348 |
break; |
| 349 |
case NL80211_CHAN_WIDTH_80: |
| 350 |
ch_inf.bw = BRCMU_CHAN_BW_80; |
| 351 |
if (primary_offset == -30) |
| 352 |
ch_inf.sb = BRCMU_CHAN_SB_LL; |
| 353 |
else if (primary_offset == -10) |
| 354 |
ch_inf.sb = BRCMU_CHAN_SB_LU; |
| 355 |
else if (primary_offset == 10) |
| 356 |
ch_inf.sb = BRCMU_CHAN_SB_UL; |
| 357 |
else |
| 358 |
ch_inf.sb = BRCMU_CHAN_SB_UU; |
| 359 |
break; |
| 360 |
case NL80211_CHAN_WIDTH_160: |
| 361 |
ch_inf.bw = BRCMU_CHAN_BW_160; |
| 362 |
if (primary_offset == -70) |
| 363 |
ch_inf.sb = BRCMU_CHAN_SB_LLL; |
| 364 |
else if (primary_offset == -50) |
| 365 |
ch_inf.sb = BRCMU_CHAN_SB_LLU; |
| 366 |
else if (primary_offset == -30) |
| 367 |
ch_inf.sb = BRCMU_CHAN_SB_LUL; |
| 368 |
else if (primary_offset == -10) |
| 369 |
ch_inf.sb = BRCMU_CHAN_SB_LUU; |
| 370 |
else if (primary_offset == 10) |
| 371 |
ch_inf.sb = BRCMU_CHAN_SB_ULL; |
| 372 |
else if (primary_offset == 30) |
| 373 |
ch_inf.sb = BRCMU_CHAN_SB_ULU; |
| 374 |
else if (primary_offset == 50) |
| 375 |
ch_inf.sb = BRCMU_CHAN_SB_UUL; |
| 376 |
else |
| 377 |
ch_inf.sb = BRCMU_CHAN_SB_UUU; |
| 378 |
break; |
| 379 |
case NL80211_CHAN_WIDTH_80P80: |
| 380 |
case NL80211_CHAN_WIDTH_5: |
| 381 |
case NL80211_CHAN_WIDTH_10: |
| 382 |
default: |
| 383 |
WARN_ON_ONCE(1); |
| 384 |
} |
| 385 |
switch (ch->chan->band) { |
| 386 |
case NL80211_BAND_2GHZ: |
| 387 |
ch_inf.band = BRCMU_CHAN_BAND_2G; |
| 388 |
break; |
| 389 |
case NL80211_BAND_5GHZ: |
| 390 |
ch_inf.band = BRCMU_CHAN_BAND_5G; |
| 391 |
break; |
| 392 |
case NL80211_BAND_60GHZ: |
| 393 |
default: |
| 394 |
WARN_ON_ONCE(1); |
| 395 |
} |
| 396 |
d11inf->encchspec(&ch_inf); |
| 397 |
|
| 398 |
brcmf_dbg(TRACE, "chanspec: 0x%x\n", ch_inf.chspec); |
| 399 |
return ch_inf.chspec; |
| 400 |
} |
| 401 |
|
| 402 |
u16 channel_to_chanspec(struct brcmu_d11inf *d11inf, |
| 403 |
struct ieee80211_channel *ch) |
| 404 |
{ |
| 405 |
struct brcmu_chan ch_inf; |
| 406 |
|
| 407 |
ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq); |
| 408 |
ch_inf.bw = BRCMU_CHAN_BW_20; |
| 409 |
d11inf->encchspec(&ch_inf); |
| 410 |
|
| 411 |
return ch_inf.chspec; |
| 412 |
} |
| 413 |
|
| 414 |
/* Traverse a string of 1-byte tag/1-byte length/variable-length value |
| 415 |
* triples, returning a pointer to the substring whose first element |
| 416 |
* matches tag |
| 417 |
*/ |
| 418 |
static const struct brcmf_tlv * |
| 419 |
brcmf_parse_tlvs(const void *buf, int buflen, uint key) |
| 420 |
{ |
| 421 |
const struct brcmf_tlv *elt = buf; |
| 422 |
int totlen = buflen; |
| 423 |
|
| 424 |
/* find tagged parameter */ |
| 425 |
while (totlen >= TLV_HDR_LEN) { |
| 426 |
int len = elt->len; |
| 427 |
|
| 428 |
/* validate remaining totlen */ |
| 429 |
if ((elt->id == key) && (totlen >= (len + TLV_HDR_LEN))) |
| 430 |
return elt; |
| 431 |
|
| 432 |
elt = (struct brcmf_tlv *)((u8 *)elt + (len + TLV_HDR_LEN)); |
| 433 |
totlen -= (len + TLV_HDR_LEN); |
| 434 |
} |
| 435 |
|
| 436 |
return NULL; |
| 437 |
} |
| 438 |
|
| 439 |
/* Is any of the tlvs the expected entry? If |
| 440 |
* not update the tlvs buffer pointer/length. |
| 441 |
*/ |
| 442 |
static bool |
| 443 |
brcmf_tlv_has_ie(const u8 *ie, const u8 **tlvs, u32 *tlvs_len, |
| 444 |
const u8 *oui, u32 oui_len, u8 type) |
| 445 |
{ |
| 446 |
/* If the contents match the OUI and the type */ |
| 447 |
if (ie[TLV_LEN_OFF] >= oui_len + 1 && |
| 448 |
!memcmp(&ie[TLV_BODY_OFF], oui, oui_len) && |
| 449 |
type == ie[TLV_BODY_OFF + oui_len]) { |
| 450 |
return true; |
| 451 |
} |
| 452 |
|
| 453 |
if (tlvs == NULL) |
| 454 |
return false; |
| 455 |
/* point to the next ie */ |
| 456 |
ie += ie[TLV_LEN_OFF] + TLV_HDR_LEN; |
| 457 |
/* calculate the length of the rest of the buffer */ |
| 458 |
*tlvs_len -= (int)(ie - *tlvs); |
| 459 |
/* update the pointer to the start of the buffer */ |
| 460 |
*tlvs = ie; |
| 461 |
|
| 462 |
return false; |
| 463 |
} |
| 464 |
|
| 465 |
static struct brcmf_vs_tlv * |
| 466 |
brcmf_find_wpaie(const u8 *parse, u32 len) |
| 467 |
{ |
| 468 |
const struct brcmf_tlv *ie; |
| 469 |
|
| 470 |
while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { |
| 471 |
if (brcmf_tlv_has_ie((const u8 *)ie, &parse, &len, |
| 472 |
WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE)) |
| 473 |
return (struct brcmf_vs_tlv *)ie; |
| 474 |
} |
| 475 |
return NULL; |
| 476 |
} |
| 477 |
|
| 478 |
static struct brcmf_vs_tlv * |
| 479 |
brcmf_find_wpsie(const u8 *parse, u32 len) |
| 480 |
{ |
| 481 |
const struct brcmf_tlv *ie; |
| 482 |
|
| 483 |
while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { |
| 484 |
if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, |
| 485 |
WPA_OUI, TLV_OUI_LEN, WPS_OUI_TYPE)) |
| 486 |
return (struct brcmf_vs_tlv *)ie; |
| 487 |
} |
| 488 |
return NULL; |
| 489 |
} |
| 490 |
|
| 491 |
static int brcmf_vif_change_validate(struct brcmf_cfg80211_info *cfg, |
| 492 |
struct brcmf_cfg80211_vif *vif, |
| 493 |
enum nl80211_iftype new_type) |
| 494 |
{ |
| 495 |
struct brcmf_cfg80211_vif *pos; |
| 496 |
bool check_combos = false; |
| 497 |
int ret = 0; |
| 498 |
struct iface_combination_params params = { |
| 499 |
.num_different_channels = 1, |
| 500 |
}; |
| 501 |
|
| 502 |
list_for_each_entry(pos, &cfg->vif_list, list) |
| 503 |
if (pos == vif) { |
| 504 |
params.iftype_num[new_type]++; |
| 505 |
} else { |
| 506 |
/* concurrent interfaces so need check combinations */ |
| 507 |
check_combos = true; |
| 508 |
params.iftype_num[pos->wdev.iftype]++; |
| 509 |
} |
| 510 |
|
| 511 |
if (check_combos) |
| 512 |
ret = cfg80211_check_combinations(cfg->wiphy, ¶ms); |
| 513 |
|
| 514 |
return ret; |
| 515 |
} |
| 516 |
|
| 517 |
static int brcmf_vif_add_validate(struct brcmf_cfg80211_info *cfg, |
| 518 |
enum nl80211_iftype new_type) |
| 519 |
{ |
| 520 |
struct brcmf_cfg80211_vif *pos; |
| 521 |
struct iface_combination_params params = { |
| 522 |
.num_different_channels = 1, |
| 523 |
}; |
| 524 |
|
| 525 |
list_for_each_entry(pos, &cfg->vif_list, list) |
| 526 |
params.iftype_num[pos->wdev.iftype]++; |
| 527 |
|
| 528 |
params.iftype_num[new_type]++; |
| 529 |
return cfg80211_check_combinations(cfg->wiphy, ¶ms); |
| 530 |
} |
| 531 |
|
| 532 |
static void convert_key_from_CPU(struct brcmf_wsec_key *key, |
| 533 |
struct brcmf_wsec_key_le *key_le) |
| 534 |
{ |
| 535 |
key_le->index = cpu_to_le32(key->index); |
| 536 |
key_le->len = cpu_to_le32(key->len); |
| 537 |
key_le->algo = cpu_to_le32(key->algo); |
| 538 |
key_le->flags = cpu_to_le32(key->flags); |
| 539 |
key_le->rxiv.hi = cpu_to_le32(key->rxiv.hi); |
| 540 |
key_le->rxiv.lo = cpu_to_le16(key->rxiv.lo); |
| 541 |
key_le->iv_initialized = cpu_to_le32(key->iv_initialized); |
| 542 |
memcpy(key_le->data, key->data, sizeof(key->data)); |
| 543 |
memcpy(key_le->ea, key->ea, sizeof(key->ea)); |
| 544 |
} |
| 545 |
|
| 546 |
static int |
| 547 |
send_key_to_dongle(struct brcmf_if *ifp, struct brcmf_wsec_key *key) |
| 548 |
{ |
| 549 |
struct brcmf_pub *drvr = ifp->drvr; |
| 550 |
int err; |
| 551 |
struct brcmf_wsec_key_le key_le; |
| 552 |
|
| 553 |
convert_key_from_CPU(key, &key_le); |
| 554 |
|
| 555 |
brcmf_netdev_wait_pend8021x(ifp); |
| 556 |
|
| 557 |
err = brcmf_fil_bsscfg_data_set(ifp, "wsec_key", &key_le, |
| 558 |
sizeof(key_le)); |
| 559 |
|
| 560 |
if (err) |
| 561 |
bphy_err(drvr, "wsec_key error (%d)\n", err); |
| 562 |
return err; |
| 563 |
} |
| 564 |
|
| 565 |
static void |
| 566 |
brcmf_cfg80211_update_proto_addr_mode(struct wireless_dev *wdev) |
| 567 |
{ |
| 568 |
struct brcmf_cfg80211_vif *vif; |
| 569 |
struct brcmf_if *ifp; |
| 570 |
|
| 571 |
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); |
| 572 |
ifp = vif->ifp; |
| 573 |
|
| 574 |
if ((wdev->iftype == NL80211_IFTYPE_ADHOC) || |
| 575 |
(wdev->iftype == NL80211_IFTYPE_AP) || |
| 576 |
(wdev->iftype == NL80211_IFTYPE_P2P_GO)) |
| 577 |
brcmf_proto_configure_addr_mode(ifp->drvr, ifp->ifidx, |
| 578 |
ADDR_DIRECT); |
| 579 |
else |
| 580 |
brcmf_proto_configure_addr_mode(ifp->drvr, ifp->ifidx, |
| 581 |
ADDR_INDIRECT); |
| 582 |
} |
| 583 |
|
| 584 |
static int brcmf_get_first_free_bsscfgidx(struct brcmf_pub *drvr) |
| 585 |
{ |
| 586 |
int bsscfgidx; |
| 587 |
|
| 588 |
for (bsscfgidx = 0; bsscfgidx < BRCMF_MAX_IFS; bsscfgidx++) { |
| 589 |
/* bsscfgidx 1 is reserved for legacy P2P */ |
| 590 |
if (bsscfgidx == 1) |
| 591 |
continue; |
| 592 |
if (!drvr->iflist[bsscfgidx]) |
| 593 |
return bsscfgidx; |
| 594 |
} |
| 595 |
|
| 596 |
return -ENOMEM; |
| 597 |
} |
| 598 |
|
| 599 |
static void brcmf_set_vif_sta_macaddr(struct brcmf_if *ifp, u8 *mac_addr) |
| 600 |
{ |
| 601 |
u8 mac_idx = ifp->drvr->sta_mac_idx; |
| 602 |
|
| 603 |
/* set difference MAC address with locally administered bit */ |
| 604 |
memcpy(mac_addr, ifp->mac_addr, ETH_ALEN); |
| 605 |
mac_addr[0] |= 0x02; |
| 606 |
mac_addr[3] ^= mac_idx ? 0xC0 : 0xA0; |
| 607 |
mac_idx++; |
| 608 |
mac_idx = mac_idx % 2; |
| 609 |
ifp->drvr->sta_mac_idx = mac_idx; |
| 610 |
} |
| 611 |
|
| 612 |
static int brcmf_cfg80211_request_sta_if(struct brcmf_if *ifp, u8 *macaddr) |
| 613 |
{ |
| 614 |
struct wl_interface_create_v1 iface_v1; |
| 615 |
struct wl_interface_create_v2 iface_v2; |
| 616 |
struct wl_interface_create_v3 iface_v3; |
| 617 |
u32 iface_create_ver; |
| 618 |
int err; |
| 619 |
|
| 620 |
/* interface_create version 1 */ |
| 621 |
memset(&iface_v1, 0, sizeof(iface_v1)); |
| 622 |
iface_v1.ver = WL_INTERFACE_CREATE_VER_1; |
| 623 |
iface_v1.flags = WL_INTERFACE_CREATE_STA | |
| 624 |
WL_INTERFACE_MAC_USE; |
| 625 |
if (!is_zero_ether_addr(macaddr)) |
| 626 |
memcpy(iface_v1.mac_addr, macaddr, ETH_ALEN); |
| 627 |
else |
| 628 |
brcmf_set_vif_sta_macaddr(ifp, iface_v1.mac_addr); |
| 629 |
|
| 630 |
err = brcmf_fil_iovar_data_get(ifp, "interface_create", |
| 631 |
&iface_v1, |
| 632 |
sizeof(iface_v1)); |
| 633 |
if (err) { |
| 634 |
brcmf_info("failed to create interface(v1), err=%d\n", |
| 635 |
err); |
| 636 |
} else { |
| 637 |
brcmf_dbg(INFO, "interface created(v1)\n"); |
| 638 |
return 0; |
| 639 |
} |
| 640 |
|
| 641 |
/* interface_create version 2 */ |
| 642 |
memset(&iface_v2, 0, sizeof(iface_v2)); |
| 643 |
iface_v2.ver = WL_INTERFACE_CREATE_VER_2; |
| 644 |
iface_v2.flags = WL_INTERFACE_MAC_USE; |
| 645 |
iface_v2.iftype = WL_INTERFACE_CREATE_STA; |
| 646 |
if (!is_zero_ether_addr(macaddr)) |
| 647 |
memcpy(iface_v2.mac_addr, macaddr, ETH_ALEN); |
| 648 |
else |
| 649 |
brcmf_set_vif_sta_macaddr(ifp, iface_v2.mac_addr); |
| 650 |
|
| 651 |
err = brcmf_fil_iovar_data_get(ifp, "interface_create", |
| 652 |
&iface_v2, |
| 653 |
sizeof(iface_v2)); |
| 654 |
if (err) { |
| 655 |
brcmf_info("failed to create interface(v2), err=%d\n", |
| 656 |
err); |
| 657 |
} else { |
| 658 |
brcmf_dbg(INFO, "interface created(v2)\n"); |
| 659 |
return 0; |
| 660 |
} |
| 661 |
|
| 662 |
/* interface_create version 3+ */ |
| 663 |
/* get supported version from firmware side */ |
| 664 |
iface_create_ver = 0; |
| 665 |
err = brcmf_fil_bsscfg_int_query(ifp, "interface_create", |
| 666 |
&iface_create_ver); |
| 667 |
if (err) { |
| 668 |
brcmf_err("fail to get supported version, err=%d\n", err); |
| 669 |
return -EOPNOTSUPP; |
| 670 |
} |
| 671 |
|
| 672 |
switch (iface_create_ver) { |
| 673 |
case WL_INTERFACE_CREATE_VER_3: |
| 674 |
memset(&iface_v3, 0, sizeof(iface_v3)); |
| 675 |
iface_v3.ver = WL_INTERFACE_CREATE_VER_3; |
| 676 |
iface_v3.flags = WL_INTERFACE_MAC_USE; |
| 677 |
iface_v3.iftype = WL_INTERFACE_CREATE_STA; |
| 678 |
if (!is_zero_ether_addr(macaddr)) |
| 679 |
memcpy(iface_v3.mac_addr, macaddr, ETH_ALEN); |
| 680 |
else |
| 681 |
brcmf_set_vif_sta_macaddr(ifp, iface_v3.mac_addr); |
| 682 |
|
| 683 |
err = brcmf_fil_iovar_data_get(ifp, "interface_create", |
| 684 |
&iface_v3, |
| 685 |
sizeof(iface_v3)); |
| 686 |
|
| 687 |
if (!err) |
| 688 |
brcmf_dbg(INFO, "interface created(v3)\n"); |
| 689 |
break; |
| 690 |
default: |
| 691 |
brcmf_err("not support interface create(v%d)\n", |
| 692 |
iface_create_ver); |
| 693 |
err = -EOPNOTSUPP; |
| 694 |
break; |
| 695 |
} |
| 696 |
|
| 697 |
if (err) { |
| 698 |
brcmf_info("station interface creation failed (%d)\n", |
| 699 |
err); |
| 700 |
return -EIO; |
| 701 |
} |
| 702 |
|
| 703 |
return 0; |
| 704 |
} |
| 705 |
|
| 706 |
static int brcmf_cfg80211_request_ap_if(struct brcmf_if *ifp) |
| 707 |
{ |
| 708 |
struct wl_interface_create_v1 iface_v1; |
| 709 |
struct wl_interface_create_v2 iface_v2; |
| 710 |
struct wl_interface_create_v3 iface_v3; |
| 711 |
u32 iface_create_ver; |
| 712 |
struct brcmf_pub *drvr = ifp->drvr; |
| 713 |
struct brcmf_mbss_ssid_le mbss_ssid_le; |
| 714 |
int bsscfgidx; |
| 715 |
int err; |
| 716 |
|
| 717 |
/* interface_create version 1 */ |
| 718 |
memset(&iface_v1, 0, sizeof(iface_v1)); |
| 719 |
iface_v1.ver = WL_INTERFACE_CREATE_VER_1; |
| 720 |
iface_v1.flags = WL_INTERFACE_CREATE_AP | |
| 721 |
WL_INTERFACE_MAC_USE; |
| 722 |
|
| 723 |
brcmf_set_vif_sta_macaddr(ifp, iface_v1.mac_addr); |
| 724 |
|
| 725 |
err = brcmf_fil_iovar_data_get(ifp, "interface_create", |
| 726 |
&iface_v1, |
| 727 |
sizeof(iface_v1)); |
| 728 |
if (err) { |
| 729 |
brcmf_info("failed to create interface(v1), err=%d\n", |
| 730 |
err); |
| 731 |
} else { |
| 732 |
brcmf_dbg(INFO, "interface created(v1)\n"); |
| 733 |
return 0; |
| 734 |
} |
| 735 |
|
| 736 |
/* interface_create version 2 */ |
| 737 |
memset(&iface_v2, 0, sizeof(iface_v2)); |
| 738 |
iface_v2.ver = WL_INTERFACE_CREATE_VER_2; |
| 739 |
iface_v2.flags = WL_INTERFACE_MAC_USE; |
| 740 |
iface_v2.iftype = WL_INTERFACE_CREATE_AP; |
| 741 |
|
| 742 |
brcmf_set_vif_sta_macaddr(ifp, iface_v2.mac_addr); |
| 743 |
|
| 744 |
err = brcmf_fil_iovar_data_get(ifp, "interface_create", |
| 745 |
&iface_v2, |
| 746 |
sizeof(iface_v2)); |
| 747 |
if (err) { |
| 748 |
brcmf_info("failed to create interface(v2), err=%d\n", |
| 749 |
err); |
| 750 |
} else { |
| 751 |
brcmf_dbg(INFO, "interface created(v2)\n"); |
| 752 |
return 0; |
| 753 |
} |
| 754 |
|
| 755 |
/* interface_create version 3+ */ |
| 756 |
/* get supported version from firmware side */ |
| 757 |
iface_create_ver = 0; |
| 758 |
err = brcmf_fil_bsscfg_int_query(ifp, "interface_create", |
| 759 |
&iface_create_ver); |
| 760 |
if (err) { |
| 761 |
brcmf_err("fail to get supported version, err=%d\n", err); |
| 762 |
return -EOPNOTSUPP; |
| 763 |
} |
| 764 |
|
| 765 |
switch (iface_create_ver) { |
| 766 |
case WL_INTERFACE_CREATE_VER_3: |
| 767 |
memset(&iface_v3, 0, sizeof(iface_v3)); |
| 768 |
iface_v3.ver = WL_INTERFACE_CREATE_VER_3; |
| 769 |
iface_v3.flags = WL_INTERFACE_MAC_USE; |
| 770 |
iface_v3.iftype = WL_INTERFACE_CREATE_AP; |
| 771 |
brcmf_set_vif_sta_macaddr(ifp, iface_v3.mac_addr); |
| 772 |
|
| 773 |
err = brcmf_fil_iovar_data_get(ifp, "interface_create", |
| 774 |
&iface_v3, |
| 775 |
sizeof(iface_v3)); |
| 776 |
|
| 777 |
if (!err) |
| 778 |
brcmf_dbg(INFO, "interface created(v3)\n"); |
| 779 |
break; |
| 780 |
default: |
| 781 |
brcmf_err("not support interface create(v%d)\n", |
| 782 |
iface_create_ver); |
| 783 |
err = -EOPNOTSUPP; |
| 784 |
break; |
| 785 |
} |
| 786 |
|
| 787 |
if (err) { |
| 788 |
brcmf_info("Does not support interface_create (%d)\n", |
| 789 |
err); |
| 790 |
memset(&mbss_ssid_le, 0, sizeof(mbss_ssid_le)); |
| 791 |
bsscfgidx = brcmf_get_first_free_bsscfgidx(ifp->drvr); |
| 792 |
if (bsscfgidx < 0) |
| 793 |
return bsscfgidx; |
| 794 |
|
| 795 |
mbss_ssid_le.bsscfgidx = cpu_to_le32(bsscfgidx); |
| 796 |
mbss_ssid_le.SSID_len = cpu_to_le32(5); |
| 797 |
sprintf(mbss_ssid_le.SSID, "ssid%d", bsscfgidx); |
| 798 |
|
| 799 |
err = brcmf_fil_bsscfg_data_set(ifp, "bsscfg:ssid", &mbss_ssid_le, |
| 800 |
sizeof(mbss_ssid_le)); |
| 801 |
|
| 802 |
if (err < 0) |
| 803 |
bphy_err(drvr, "setting ssid failed %d\n", err); |
| 804 |
} |
| 805 |
|
| 806 |
return err; |
| 807 |
} |
| 808 |
|
| 809 |
/** |
| 810 |
* brcmf_apsta_add_vif() - create a new AP or STA virtual interface |
| 811 |
* |
| 812 |
* @wiphy: wiphy device of new interface. |
| 813 |
* @name: name of the new interface. |
| 814 |
* @params: contains mac address for AP or STA device. |
| 815 |
* @type: interface type. |
| 816 |
* |
| 817 |
* Return: pointer to new vif on success, ERR_PTR(-errno) if not |
| 818 |
*/ |
| 819 |
static |
| 820 |
struct wireless_dev *brcmf_apsta_add_vif(struct wiphy *wiphy, const char *name, |
| 821 |
struct vif_params *params, |
| 822 |
enum nl80211_iftype type) |
| 823 |
{ |
| 824 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 825 |
struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); |
| 826 |
struct brcmf_pub *drvr = cfg->pub; |
| 827 |
struct brcmf_cfg80211_vif *vif; |
| 828 |
int err; |
| 829 |
|
| 830 |
if (type != NL80211_IFTYPE_STATION && type != NL80211_IFTYPE_AP) |
| 831 |
return ERR_PTR(-EINVAL); |
| 832 |
|
| 833 |
if (brcmf_cfg80211_vif_event_armed(cfg)) |
| 834 |
return ERR_PTR(-EBUSY); |
| 835 |
|
| 836 |
brcmf_dbg(INFO, "Adding vif \"%s\"\n", name); |
| 837 |
|
| 838 |
vif = brcmf_alloc_vif(cfg, type); |
| 839 |
if (IS_ERR(vif)) |
| 840 |
return (struct wireless_dev *)vif; |
| 841 |
|
| 842 |
brcmf_cfg80211_arm_vif_event(cfg, vif); |
| 843 |
|
| 844 |
if (type == NL80211_IFTYPE_STATION) |
| 845 |
err = brcmf_cfg80211_request_sta_if(ifp, params->macaddr); |
| 846 |
else |
| 847 |
err = brcmf_cfg80211_request_ap_if(ifp); |
| 848 |
if (err) { |
| 849 |
brcmf_cfg80211_arm_vif_event(cfg, NULL); |
| 850 |
goto fail; |
| 851 |
} |
| 852 |
|
| 853 |
/* wait for firmware event */ |
| 854 |
err = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_ADD, |
| 855 |
BRCMF_VIF_EVENT_TIMEOUT); |
| 856 |
brcmf_cfg80211_arm_vif_event(cfg, NULL); |
| 857 |
if (!err) { |
| 858 |
bphy_err(drvr, "timeout occurred\n"); |
| 859 |
err = -EIO; |
| 860 |
goto fail; |
| 861 |
} |
| 862 |
|
| 863 |
/* interface created in firmware */ |
| 864 |
ifp = vif->ifp; |
| 865 |
if (!ifp) { |
| 866 |
bphy_err(drvr, "no if pointer provided\n"); |
| 867 |
err = -ENOENT; |
| 868 |
goto fail; |
| 869 |
} |
| 870 |
|
| 871 |
strscpy(ifp->ndev->name, name, sizeof(ifp->ndev->name)); |
| 872 |
err = brcmf_net_attach(ifp, true); |
| 873 |
if (err) { |
| 874 |
bphy_err(drvr, "Registering netdevice failed\n"); |
| 875 |
free_netdev(ifp->ndev); |
| 876 |
goto fail; |
| 877 |
} |
| 878 |
|
| 879 |
return &ifp->vif->wdev; |
| 880 |
|
| 881 |
fail: |
| 882 |
brcmf_free_vif(vif); |
| 883 |
return ERR_PTR(err); |
| 884 |
} |
| 885 |
|
| 886 |
static bool brcmf_is_apmode(struct brcmf_cfg80211_vif *vif) |
| 887 |
{ |
| 888 |
enum nl80211_iftype iftype; |
| 889 |
|
| 890 |
iftype = vif->wdev.iftype; |
| 891 |
return iftype == NL80211_IFTYPE_AP || iftype == NL80211_IFTYPE_P2P_GO; |
| 892 |
} |
| 893 |
|
| 894 |
static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif) |
| 895 |
{ |
| 896 |
return vif->wdev.iftype == NL80211_IFTYPE_ADHOC; |
| 897 |
} |
| 898 |
|
| 899 |
/** |
| 900 |
* brcmf_mon_add_vif() - create monitor mode virtual interface |
| 901 |
* |
| 902 |
* @wiphy: wiphy device of new interface. |
| 903 |
* @name: name of the new interface. |
| 904 |
* |
| 905 |
* Return: pointer to new vif on success, ERR_PTR(-errno) if not |
| 906 |
*/ |
| 907 |
static struct wireless_dev *brcmf_mon_add_vif(struct wiphy *wiphy, |
| 908 |
const char *name) |
| 909 |
{ |
| 910 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 911 |
struct brcmf_cfg80211_vif *vif; |
| 912 |
struct net_device *ndev; |
| 913 |
struct brcmf_if *ifp; |
| 914 |
int err; |
| 915 |
|
| 916 |
if (cfg->pub->mon_if) { |
| 917 |
err = -EEXIST; |
| 918 |
goto err_out; |
| 919 |
} |
| 920 |
|
| 921 |
vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_MONITOR); |
| 922 |
if (IS_ERR(vif)) { |
| 923 |
err = PTR_ERR(vif); |
| 924 |
goto err_out; |
| 925 |
} |
| 926 |
|
| 927 |
ndev = alloc_netdev(sizeof(*ifp), name, NET_NAME_UNKNOWN, ether_setup); |
| 928 |
if (!ndev) { |
| 929 |
err = -ENOMEM; |
| 930 |
goto err_free_vif; |
| 931 |
} |
| 932 |
ndev->type = ARPHRD_IEEE80211_RADIOTAP; |
| 933 |
ndev->ieee80211_ptr = &vif->wdev; |
| 934 |
ndev->needs_free_netdev = true; |
| 935 |
ndev->priv_destructor = brcmf_cfg80211_free_vif; |
| 936 |
SET_NETDEV_DEV(ndev, wiphy_dev(cfg->wiphy)); |
| 937 |
|
| 938 |
ifp = netdev_priv(ndev); |
| 939 |
ifp->vif = vif; |
| 940 |
ifp->ndev = ndev; |
| 941 |
ifp->drvr = cfg->pub; |
| 942 |
|
| 943 |
vif->ifp = ifp; |
| 944 |
vif->wdev.netdev = ndev; |
| 945 |
|
| 946 |
err = brcmf_net_mon_attach(ifp); |
| 947 |
if (err) { |
| 948 |
brcmf_err("Failed to attach %s device\n", ndev->name); |
| 949 |
free_netdev(ndev); |
| 950 |
goto err_free_vif; |
| 951 |
} |
| 952 |
|
| 953 |
cfg->pub->mon_if = ifp; |
| 954 |
|
| 955 |
return &vif->wdev; |
| 956 |
|
| 957 |
err_free_vif: |
| 958 |
brcmf_free_vif(vif); |
| 959 |
err_out: |
| 960 |
return ERR_PTR(err); |
| 961 |
} |
| 962 |
|
| 963 |
static int brcmf_mon_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) |
| 964 |
{ |
| 965 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 966 |
struct net_device *ndev = wdev->netdev; |
| 967 |
|
| 968 |
ndev->netdev_ops->ndo_stop(ndev); |
| 969 |
|
| 970 |
brcmf_net_detach(ndev, true); |
| 971 |
|
| 972 |
cfg->pub->mon_if = NULL; |
| 973 |
|
| 974 |
return 0; |
| 975 |
} |
| 976 |
|
| 977 |
static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, |
| 978 |
const char *name, |
| 979 |
unsigned char name_assign_type, |
| 980 |
enum nl80211_iftype type, |
| 981 |
struct vif_params *params) |
| 982 |
{ |
| 983 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 984 |
struct brcmf_pub *drvr = cfg->pub; |
| 985 |
struct wireless_dev *wdev; |
| 986 |
int err; |
| 987 |
|
| 988 |
brcmf_dbg(TRACE, "enter: %s type %d\n", name, type); |
| 989 |
err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type); |
| 990 |
if (err) { |
| 991 |
bphy_err(drvr, "iface validation failed: err=%d\n", err); |
| 992 |
return ERR_PTR(err); |
| 993 |
} |
| 994 |
switch (type) { |
| 995 |
case NL80211_IFTYPE_ADHOC: |
| 996 |
case NL80211_IFTYPE_AP_VLAN: |
| 997 |
case NL80211_IFTYPE_WDS: |
| 998 |
case NL80211_IFTYPE_MESH_POINT: |
| 999 |
return ERR_PTR(-EOPNOTSUPP); |
| 1000 |
case NL80211_IFTYPE_MONITOR: |
| 1001 |
return brcmf_mon_add_vif(wiphy, name); |
| 1002 |
case NL80211_IFTYPE_STATION: |
| 1003 |
case NL80211_IFTYPE_AP: |
| 1004 |
wdev = brcmf_apsta_add_vif(wiphy, name, params, type); |
| 1005 |
break; |
| 1006 |
case NL80211_IFTYPE_P2P_CLIENT: |
| 1007 |
case NL80211_IFTYPE_P2P_GO: |
| 1008 |
case NL80211_IFTYPE_P2P_DEVICE: |
| 1009 |
wdev = brcmf_p2p_add_vif(wiphy, name, name_assign_type, type, params); |
| 1010 |
break; |
| 1011 |
case NL80211_IFTYPE_UNSPECIFIED: |
| 1012 |
default: |
| 1013 |
return ERR_PTR(-EINVAL); |
| 1014 |
} |
| 1015 |
|
| 1016 |
if (IS_ERR(wdev)) |
| 1017 |
bphy_err(drvr, "add iface %s type %d failed: err=%d\n", name, |
| 1018 |
type, (int)PTR_ERR(wdev)); |
| 1019 |
else |
| 1020 |
brcmf_cfg80211_update_proto_addr_mode(wdev); |
| 1021 |
|
| 1022 |
return wdev; |
| 1023 |
} |
| 1024 |
|
| 1025 |
static void brcmf_scan_config_mpc(struct brcmf_if *ifp, int mpc) |
| 1026 |
{ |
| 1027 |
if (brcmf_feat_is_quirk_enabled(ifp, BRCMF_FEAT_QUIRK_NEED_MPC)) |
| 1028 |
brcmf_set_mpc(ifp, mpc); |
| 1029 |
} |
| 1030 |
|
| 1031 |
void brcmf_set_mpc(struct brcmf_if *ifp, int mpc) |
| 1032 |
{ |
| 1033 |
struct brcmf_pub *drvr = ifp->drvr; |
| 1034 |
s32 err = 0; |
| 1035 |
|
| 1036 |
if (check_vif_up(ifp->vif)) { |
| 1037 |
err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc); |
| 1038 |
if (err) { |
| 1039 |
bphy_err(drvr, "fail to set mpc\n"); |
| 1040 |
return; |
| 1041 |
} |
| 1042 |
brcmf_dbg(INFO, "MPC : %d\n", mpc); |
| 1043 |
} |
| 1044 |
} |
| 1045 |
|
| 1046 |
bool brcmf_is_apmode_operating(struct wiphy *wiphy) |
| 1047 |
{ |
| 1048 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 1049 |
struct brcmf_cfg80211_vif *vif; |
| 1050 |
bool ret = false; |
| 1051 |
|
| 1052 |
list_for_each_entry(vif, &cfg->vif_list, list) { |
| 1053 |
if (brcmf_is_apmode(vif) && |
| 1054 |
test_bit(BRCMF_VIF_STATUS_AP_CREATED, &vif->sme_state)) |
| 1055 |
ret = true; |
| 1056 |
} |
| 1057 |
|
| 1058 |
return ret; |
| 1059 |
} |
| 1060 |
|
| 1061 |
static void brcmf_scan_params_v2_to_v1(struct brcmf_scan_params_v2_le *params_v2_le, |
| 1062 |
struct brcmf_scan_params_le *params_le) |
| 1063 |
{ |
| 1064 |
size_t params_size; |
| 1065 |
u32 ch; |
| 1066 |
int n_channels, n_ssids; |
| 1067 |
|
| 1068 |
memcpy(¶ms_le->ssid_le, ¶ms_v2_le->ssid_le, |
| 1069 |
sizeof(params_le->ssid_le)); |
| 1070 |
memcpy(¶ms_le->bssid, ¶ms_v2_le->bssid, |
| 1071 |
sizeof(params_le->bssid)); |
| 1072 |
|
| 1073 |
params_le->bss_type = params_v2_le->bss_type; |
| 1074 |
params_le->scan_type = le32_to_cpu(params_v2_le->scan_type); |
| 1075 |
params_le->nprobes = params_v2_le->nprobes; |
| 1076 |
params_le->active_time = params_v2_le->active_time; |
| 1077 |
params_le->passive_time = params_v2_le->passive_time; |
| 1078 |
params_le->home_time = params_v2_le->home_time; |
| 1079 |
params_le->channel_num = params_v2_le->channel_num; |
| 1080 |
|
| 1081 |
ch = le32_to_cpu(params_v2_le->channel_num); |
| 1082 |
n_channels = ch & BRCMF_SCAN_PARAMS_COUNT_MASK; |
| 1083 |
n_ssids = ch >> BRCMF_SCAN_PARAMS_NSSID_SHIFT; |
| 1084 |
|
| 1085 |
params_size = sizeof(u16) * n_channels; |
| 1086 |
if (n_ssids > 0) { |
| 1087 |
params_size = roundup(params_size, sizeof(u32)); |
| 1088 |
params_size += sizeof(struct brcmf_ssid_le) * n_ssids; |
| 1089 |
} |
| 1090 |
|
| 1091 |
memcpy(¶ms_le->channel_list[0], |
| 1092 |
¶ms_v2_le->channel_list[0], params_size); |
| 1093 |
} |
| 1094 |
|
| 1095 |
static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg, |
| 1096 |
struct brcmf_scan_params_v2_le *params_le, |
| 1097 |
struct cfg80211_scan_request *request) |
| 1098 |
{ |
| 1099 |
u32 n_ssids; |
| 1100 |
u32 n_channels; |
| 1101 |
s32 i; |
| 1102 |
s32 offset; |
| 1103 |
u16 chanspec; |
| 1104 |
char *ptr; |
| 1105 |
int length; |
| 1106 |
struct brcmf_ssid_le ssid_le; |
| 1107 |
|
| 1108 |
eth_broadcast_addr(params_le->bssid); |
| 1109 |
|
| 1110 |
length = BRCMF_SCAN_PARAMS_V2_FIXED_SIZE; |
| 1111 |
|
| 1112 |
params_le->version = cpu_to_le16(BRCMF_SCAN_PARAMS_VERSION_V2); |
| 1113 |
params_le->bss_type = DOT11_BSSTYPE_ANY; |
| 1114 |
params_le->scan_type = cpu_to_le32(BRCMF_SCANTYPE_ACTIVE); |
| 1115 |
params_le->channel_num = 0; |
| 1116 |
params_le->nprobes = cpu_to_le32(-1); |
| 1117 |
params_le->active_time = cpu_to_le32(-1); |
| 1118 |
params_le->passive_time = cpu_to_le32(-1); |
| 1119 |
params_le->home_time = cpu_to_le32(-1); |
| 1120 |
memset(¶ms_le->ssid_le, 0, sizeof(params_le->ssid_le)); |
| 1121 |
|
| 1122 |
/* Scan abort */ |
| 1123 |
if (!request) { |
| 1124 |
length += sizeof(u16); |
| 1125 |
params_le->channel_num = cpu_to_le32(1); |
| 1126 |
params_le->channel_list[0] = cpu_to_le16(-1); |
| 1127 |
params_le->length = cpu_to_le16(length); |
| 1128 |
return; |
| 1129 |
} |
| 1130 |
|
| 1131 |
n_ssids = request->n_ssids; |
| 1132 |
n_channels = request->n_channels; |
| 1133 |
|
| 1134 |
/* Copy channel array if applicable */ |
| 1135 |
brcmf_dbg(SCAN, "### List of channelspecs to scan ### %d\n", |
| 1136 |
n_channels); |
| 1137 |
if (n_channels > 0) { |
| 1138 |
length += roundup(sizeof(u16) * n_channels, sizeof(u32)); |
| 1139 |
for (i = 0; i < n_channels; i++) { |
| 1140 |
chanspec = channel_to_chanspec(&cfg->d11inf, |
| 1141 |
request->channels[i]); |
| 1142 |
brcmf_dbg(SCAN, "Chan : %d, Channel spec: %x\n", |
| 1143 |
request->channels[i]->hw_value, chanspec); |
| 1144 |
params_le->channel_list[i] = cpu_to_le16(chanspec); |
| 1145 |
} |
| 1146 |
} else { |
| 1147 |
brcmf_dbg(SCAN, "Scanning all channels\n"); |
| 1148 |
} |
| 1149 |
|
| 1150 |
/* Copy ssid array if applicable */ |
| 1151 |
brcmf_dbg(SCAN, "### List of SSIDs to scan ### %d\n", n_ssids); |
| 1152 |
if (n_ssids > 0) { |
| 1153 |
offset = offsetof(struct brcmf_scan_params_v2_le, channel_list) + |
| 1154 |
n_channels * sizeof(u16); |
| 1155 |
offset = roundup(offset, sizeof(u32)); |
| 1156 |
length += sizeof(ssid_le) * n_ssids; |
| 1157 |
ptr = (char *)params_le + offset; |
| 1158 |
for (i = 0; i < n_ssids; i++) { |
| 1159 |
memset(&ssid_le, 0, sizeof(ssid_le)); |
| 1160 |
ssid_le.SSID_len = |
| 1161 |
cpu_to_le32(request->ssids[i].ssid_len); |
| 1162 |
memcpy(ssid_le.SSID, request->ssids[i].ssid, |
| 1163 |
request->ssids[i].ssid_len); |
| 1164 |
if (!ssid_le.SSID_len) |
| 1165 |
brcmf_dbg(SCAN, "%d: Broadcast scan\n", i); |
| 1166 |
else |
| 1167 |
brcmf_dbg(SCAN, "%d: scan for %.32s size=%d\n", |
| 1168 |
i, ssid_le.SSID, ssid_le.SSID_len); |
| 1169 |
memcpy(ptr, &ssid_le, sizeof(ssid_le)); |
| 1170 |
ptr += sizeof(ssid_le); |
| 1171 |
} |
| 1172 |
} else { |
| 1173 |
brcmf_dbg(SCAN, "Performing passive scan\n"); |
| 1174 |
params_le->scan_type = cpu_to_le32(BRCMF_SCANTYPE_PASSIVE); |
| 1175 |
} |
| 1176 |
params_le->length = cpu_to_le16(length); |
| 1177 |
/* Adding mask to channel numbers */ |
| 1178 |
params_le->channel_num = |
| 1179 |
cpu_to_le32((n_ssids << BRCMF_SCAN_PARAMS_NSSID_SHIFT) | |
| 1180 |
(n_channels & BRCMF_SCAN_PARAMS_COUNT_MASK)); |
| 1181 |
} |
| 1182 |
|
| 1183 |
s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, |
| 1184 |
struct brcmf_if *ifp, bool aborted, |
| 1185 |
bool fw_abort) |
| 1186 |
{ |
| 1187 |
struct brcmf_pub *drvr = cfg->pub; |
| 1188 |
struct brcmf_scan_params_v2_le params_v2_le; |
| 1189 |
struct cfg80211_scan_request *scan_request; |
| 1190 |
u64 reqid; |
| 1191 |
u32 bucket; |
| 1192 |
s32 err = 0; |
| 1193 |
|
| 1194 |
brcmf_dbg(SCAN, "Enter\n"); |
| 1195 |
|
| 1196 |
/* clear scan request, because the FW abort can cause a second call */ |
| 1197 |
/* to this functon and might cause a double cfg80211_scan_done */ |
| 1198 |
scan_request = cfg->scan_request; |
| 1199 |
cfg->scan_request = NULL; |
| 1200 |
|
| 1201 |
timer_delete_sync(&cfg->escan_timeout); |
| 1202 |
|
| 1203 |
if (fw_abort) { |
| 1204 |
/* Do a scan abort to stop the driver's scan engine */ |
| 1205 |
brcmf_dbg(SCAN, "ABORT scan in firmware\n"); |
| 1206 |
|
| 1207 |
brcmf_escan_prep(cfg, ¶ms_v2_le, NULL); |
| 1208 |
|
| 1209 |
/* E-Scan (or anyother type) can be aborted by SCAN */ |
| 1210 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_V2)) { |
| 1211 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN, |
| 1212 |
¶ms_v2_le, |
| 1213 |
sizeof(params_v2_le)); |
| 1214 |
} else { |
| 1215 |
struct brcmf_scan_params_le params_le; |
| 1216 |
|
| 1217 |
brcmf_scan_params_v2_to_v1(¶ms_v2_le, ¶ms_le); |
| 1218 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN, |
| 1219 |
¶ms_le, |
| 1220 |
sizeof(params_le)); |
| 1221 |
} |
| 1222 |
|
| 1223 |
if (err) |
| 1224 |
bphy_err(drvr, "Scan abort failed\n"); |
| 1225 |
} |
| 1226 |
|
| 1227 |
brcmf_scan_config_mpc(ifp, 1); |
| 1228 |
|
| 1229 |
/* |
| 1230 |
* e-scan can be initiated internally |
| 1231 |
* which takes precedence. |
| 1232 |
*/ |
| 1233 |
if (cfg->int_escan_map) { |
| 1234 |
brcmf_dbg(SCAN, "scheduled scan completed (%x)\n", |
| 1235 |
cfg->int_escan_map); |
| 1236 |
while (cfg->int_escan_map) { |
| 1237 |
bucket = __ffs(cfg->int_escan_map); |
| 1238 |
cfg->int_escan_map &= ~BIT(bucket); |
| 1239 |
reqid = brcmf_pno_find_reqid_by_bucket(cfg->pno, |
| 1240 |
bucket); |
| 1241 |
if (!aborted) { |
| 1242 |
brcmf_dbg(SCAN, "report results: reqid=%llu\n", |
| 1243 |
reqid); |
| 1244 |
cfg80211_sched_scan_results(cfg_to_wiphy(cfg), |
| 1245 |
reqid); |
| 1246 |
} |
| 1247 |
} |
| 1248 |
} else if (scan_request) { |
| 1249 |
struct cfg80211_scan_info info = { |
| 1250 |
.aborted = aborted, |
| 1251 |
}; |
| 1252 |
|
| 1253 |
brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", |
| 1254 |
aborted ? "Aborted" : "Done"); |
| 1255 |
cfg80211_scan_done(scan_request, &info); |
| 1256 |
} |
| 1257 |
if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) |
| 1258 |
brcmf_dbg(SCAN, "Scan complete, probably P2P scan\n"); |
| 1259 |
|
| 1260 |
return err; |
| 1261 |
} |
| 1262 |
|
| 1263 |
static int brcmf_cfg80211_del_apsta_iface(struct wiphy *wiphy, |
| 1264 |
struct wireless_dev *wdev) |
| 1265 |
{ |
| 1266 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 1267 |
struct net_device *ndev = wdev->netdev; |
| 1268 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1269 |
struct brcmf_pub *drvr = cfg->pub; |
| 1270 |
int ret; |
| 1271 |
int err; |
| 1272 |
|
| 1273 |
brcmf_cfg80211_arm_vif_event(cfg, ifp->vif); |
| 1274 |
|
| 1275 |
err = brcmf_fil_bsscfg_data_set(ifp, "interface_remove", NULL, 0); |
| 1276 |
if (err) { |
| 1277 |
bphy_err(drvr, "interface_remove failed %d\n", err); |
| 1278 |
goto err_unarm; |
| 1279 |
} |
| 1280 |
|
| 1281 |
/* wait for firmware event */ |
| 1282 |
ret = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_DEL, |
| 1283 |
BRCMF_VIF_EVENT_TIMEOUT); |
| 1284 |
if (!ret) { |
| 1285 |
bphy_err(drvr, "timeout occurred\n"); |
| 1286 |
err = -EIO; |
| 1287 |
goto err_unarm; |
| 1288 |
} |
| 1289 |
|
| 1290 |
brcmf_remove_interface(ifp, true); |
| 1291 |
|
| 1292 |
err_unarm: |
| 1293 |
brcmf_cfg80211_arm_vif_event(cfg, NULL); |
| 1294 |
return err; |
| 1295 |
} |
| 1296 |
|
| 1297 |
static |
| 1298 |
int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) |
| 1299 |
{ |
| 1300 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 1301 |
struct net_device *ndev = wdev->netdev; |
| 1302 |
|
| 1303 |
if (ndev && ndev == cfg_to_ndev(cfg)) |
| 1304 |
return -ENOTSUPP; |
| 1305 |
|
| 1306 |
/* vif event pending in firmware */ |
| 1307 |
if (brcmf_cfg80211_vif_event_armed(cfg)) |
| 1308 |
return -EBUSY; |
| 1309 |
|
| 1310 |
if (ndev) { |
| 1311 |
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status) && |
| 1312 |
cfg->escan_info.ifp == netdev_priv(ndev)) |
| 1313 |
brcmf_notify_escan_complete(cfg, netdev_priv(ndev), |
| 1314 |
true, true); |
| 1315 |
|
| 1316 |
brcmf_fil_iovar_int_set(netdev_priv(ndev), "mpc", 1); |
| 1317 |
} |
| 1318 |
|
| 1319 |
switch (wdev->iftype) { |
| 1320 |
case NL80211_IFTYPE_ADHOC: |
| 1321 |
case NL80211_IFTYPE_AP_VLAN: |
| 1322 |
case NL80211_IFTYPE_WDS: |
| 1323 |
case NL80211_IFTYPE_MESH_POINT: |
| 1324 |
return -EOPNOTSUPP; |
| 1325 |
case NL80211_IFTYPE_MONITOR: |
| 1326 |
return brcmf_mon_del_vif(wiphy, wdev); |
| 1327 |
case NL80211_IFTYPE_STATION: |
| 1328 |
case NL80211_IFTYPE_AP: |
| 1329 |
return brcmf_cfg80211_del_apsta_iface(wiphy, wdev); |
| 1330 |
case NL80211_IFTYPE_P2P_CLIENT: |
| 1331 |
case NL80211_IFTYPE_P2P_GO: |
| 1332 |
case NL80211_IFTYPE_P2P_DEVICE: |
| 1333 |
return brcmf_p2p_del_vif(wiphy, wdev); |
| 1334 |
case NL80211_IFTYPE_UNSPECIFIED: |
| 1335 |
default: |
| 1336 |
return -EINVAL; |
| 1337 |
} |
| 1338 |
return -EOPNOTSUPP; |
| 1339 |
} |
| 1340 |
|
| 1341 |
static s32 |
| 1342 |
brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, |
| 1343 |
enum nl80211_iftype type, |
| 1344 |
struct vif_params *params) |
| 1345 |
{ |
| 1346 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 1347 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1348 |
struct brcmf_cfg80211_vif *vif = ifp->vif; |
| 1349 |
struct brcmf_pub *drvr = cfg->pub; |
| 1350 |
s32 infra = 0; |
| 1351 |
s32 ap = 0; |
| 1352 |
s32 err = 0; |
| 1353 |
|
| 1354 |
brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, type=%d\n", ifp->bsscfgidx, |
| 1355 |
type); |
| 1356 |
|
| 1357 |
/* WAR: There are a number of p2p interface related problems which |
| 1358 |
* need to be handled initially (before doing the validate). |
| 1359 |
* wpa_supplicant tends to do iface changes on p2p device/client/go |
| 1360 |
* which are not always possible/allowed. However we need to return |
| 1361 |
* OK otherwise the wpa_supplicant wont start. The situation differs |
| 1362 |
* on configuration and setup (p2pon=1 module param). The first check |
| 1363 |
* is to see if the request is a change to station for p2p iface. |
| 1364 |
*/ |
| 1365 |
if ((type == NL80211_IFTYPE_STATION) && |
| 1366 |
((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) || |
| 1367 |
(vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) || |
| 1368 |
(vif->wdev.iftype == NL80211_IFTYPE_P2P_DEVICE))) { |
| 1369 |
brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n"); |
| 1370 |
/* Now depending on whether module param p2pon=1 was used the |
| 1371 |
* response needs to be either 0 or EOPNOTSUPP. The reason is |
| 1372 |
* that if p2pon=1 is used, but a newer supplicant is used then |
| 1373 |
* we should return an error, as this combination wont work. |
| 1374 |
* In other situations 0 is returned and supplicant will start |
| 1375 |
* normally. It will give a trace in cfg80211, but it is the |
| 1376 |
* only way to get it working. Unfortunately this will result |
| 1377 |
* in situation where we wont support new supplicant in |
| 1378 |
* combination with module param p2pon=1, but that is the way |
| 1379 |
* it is. If the user tries this then unloading of driver might |
| 1380 |
* fail/lock. |
| 1381 |
*/ |
| 1382 |
if (cfg->p2p.p2pdev_dynamically) |
| 1383 |
return -EOPNOTSUPP; |
| 1384 |
else |
| 1385 |
return 0; |
| 1386 |
} |
| 1387 |
err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type); |
| 1388 |
if (err) { |
| 1389 |
bphy_err(drvr, "iface validation failed: err=%d\n", err); |
| 1390 |
return err; |
| 1391 |
} |
| 1392 |
switch (type) { |
| 1393 |
case NL80211_IFTYPE_MONITOR: |
| 1394 |
case NL80211_IFTYPE_WDS: |
| 1395 |
bphy_err(drvr, "type (%d) : currently we do not support this type\n", |
| 1396 |
type); |
| 1397 |
return -EOPNOTSUPP; |
| 1398 |
case NL80211_IFTYPE_ADHOC: |
| 1399 |
infra = 0; |
| 1400 |
break; |
| 1401 |
case NL80211_IFTYPE_STATION: |
| 1402 |
infra = 1; |
| 1403 |
break; |
| 1404 |
case NL80211_IFTYPE_AP: |
| 1405 |
case NL80211_IFTYPE_P2P_GO: |
| 1406 |
ap = 1; |
| 1407 |
break; |
| 1408 |
default: |
| 1409 |
err = -EINVAL; |
| 1410 |
goto done; |
| 1411 |
} |
| 1412 |
|
| 1413 |
if (ap) { |
| 1414 |
if (type == NL80211_IFTYPE_P2P_GO) { |
| 1415 |
brcmf_dbg(INFO, "IF Type = P2P GO\n"); |
| 1416 |
err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO); |
| 1417 |
} |
| 1418 |
if (!err) { |
| 1419 |
brcmf_dbg(INFO, "IF Type = AP\n"); |
| 1420 |
} |
| 1421 |
} else { |
| 1422 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra); |
| 1423 |
if (err) { |
| 1424 |
bphy_err(drvr, "WLC_SET_INFRA error (%d)\n", err); |
| 1425 |
err = -EAGAIN; |
| 1426 |
goto done; |
| 1427 |
} |
| 1428 |
brcmf_dbg(INFO, "IF Type = %s\n", brcmf_is_ibssmode(vif) ? |
| 1429 |
"Adhoc" : "Infra"); |
| 1430 |
} |
| 1431 |
ndev->ieee80211_ptr->iftype = type; |
| 1432 |
|
| 1433 |
brcmf_cfg80211_update_proto_addr_mode(&vif->wdev); |
| 1434 |
|
| 1435 |
done: |
| 1436 |
brcmf_dbg(TRACE, "Exit\n"); |
| 1437 |
|
| 1438 |
return err; |
| 1439 |
} |
| 1440 |
|
| 1441 |
static s32 |
| 1442 |
brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp, |
| 1443 |
struct cfg80211_scan_request *request) |
| 1444 |
{ |
| 1445 |
struct brcmf_pub *drvr = cfg->pub; |
| 1446 |
s32 params_size = BRCMF_SCAN_PARAMS_V2_FIXED_SIZE + |
| 1447 |
offsetof(struct brcmf_escan_params_le, params_v2_le); |
| 1448 |
struct brcmf_escan_params_le *params; |
| 1449 |
s32 err = 0; |
| 1450 |
|
| 1451 |
brcmf_dbg(SCAN, "E-SCAN START\n"); |
| 1452 |
|
| 1453 |
if (request != NULL) { |
| 1454 |
/* Allocate space for populating ssids in struct */ |
| 1455 |
params_size += sizeof(u32) * ((request->n_channels + 1) / 2); |
| 1456 |
|
| 1457 |
/* Allocate space for populating ssids in struct */ |
| 1458 |
params_size += sizeof(struct brcmf_ssid_le) * request->n_ssids; |
| 1459 |
} |
| 1460 |
|
| 1461 |
params = kzalloc(params_size, GFP_KERNEL); |
| 1462 |
if (!params) { |
| 1463 |
err = -ENOMEM; |
| 1464 |
goto exit; |
| 1465 |
} |
| 1466 |
BUG_ON(params_size + sizeof("escan") >= BRCMF_DCMD_MEDLEN); |
| 1467 |
brcmf_escan_prep(cfg, ¶ms->params_v2_le, request); |
| 1468 |
|
| 1469 |
params->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION_V2); |
| 1470 |
|
| 1471 |
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_V2)) { |
| 1472 |
struct brcmf_escan_params_le *params_v1; |
| 1473 |
|
| 1474 |
params_size -= BRCMF_SCAN_PARAMS_V2_FIXED_SIZE; |
| 1475 |
params_size += BRCMF_SCAN_PARAMS_FIXED_SIZE; |
| 1476 |
params_v1 = kzalloc(params_size, GFP_KERNEL); |
| 1477 |
if (!params_v1) { |
| 1478 |
err = -ENOMEM; |
| 1479 |
goto exit_params; |
| 1480 |
} |
| 1481 |
params_v1->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION); |
| 1482 |
brcmf_scan_params_v2_to_v1(¶ms->params_v2_le, ¶ms_v1->params_le); |
| 1483 |
kfree(params); |
| 1484 |
params = params_v1; |
| 1485 |
} |
| 1486 |
|
| 1487 |
params->action = cpu_to_le16(WL_ESCAN_ACTION_START); |
| 1488 |
params->sync_id = cpu_to_le16(0x1234); |
| 1489 |
|
| 1490 |
err = brcmf_fil_iovar_data_set(ifp, "escan", params, params_size); |
| 1491 |
if (err) { |
| 1492 |
if (err == -EBUSY) |
| 1493 |
brcmf_dbg(INFO, "system busy : escan canceled\n"); |
| 1494 |
else |
| 1495 |
bphy_err(drvr, "error (%d)\n", err); |
| 1496 |
} |
| 1497 |
|
| 1498 |
exit_params: |
| 1499 |
kfree(params); |
| 1500 |
exit: |
| 1501 |
return err; |
| 1502 |
} |
| 1503 |
|
| 1504 |
static s32 |
| 1505 |
brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request) |
| 1506 |
{ |
| 1507 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 1508 |
s32 err; |
| 1509 |
struct brcmf_scan_results *results; |
| 1510 |
struct escan_info *escan = &cfg->escan_info; |
| 1511 |
|
| 1512 |
brcmf_dbg(SCAN, "Enter\n"); |
| 1513 |
escan->ifp = ifp; |
| 1514 |
escan->wiphy = cfg->wiphy; |
| 1515 |
escan->escan_state = WL_ESCAN_STATE_SCANNING; |
| 1516 |
|
| 1517 |
brcmf_scan_config_mpc(ifp, 0); |
| 1518 |
results = (struct brcmf_scan_results *)cfg->escan_info.escan_buf; |
| 1519 |
results->version = 0; |
| 1520 |
results->count = 0; |
| 1521 |
results->buflen = WL_ESCAN_RESULTS_FIXED_SIZE; |
| 1522 |
|
| 1523 |
err = escan->run(cfg, ifp, request); |
| 1524 |
if (err) |
| 1525 |
brcmf_scan_config_mpc(ifp, 1); |
| 1526 |
return err; |
| 1527 |
} |
| 1528 |
|
| 1529 |
static s32 |
| 1530 |
brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) |
| 1531 |
{ |
| 1532 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 1533 |
struct brcmf_pub *drvr = cfg->pub; |
| 1534 |
struct brcmf_cfg80211_vif *vif; |
| 1535 |
s32 err = 0; |
| 1536 |
|
| 1537 |
brcmf_dbg(TRACE, "Enter\n"); |
| 1538 |
vif = container_of(request->wdev, struct brcmf_cfg80211_vif, wdev); |
| 1539 |
if (!check_vif_up(vif)) |
| 1540 |
return -EIO; |
| 1541 |
|
| 1542 |
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { |
| 1543 |
bphy_err(drvr, "Scanning already: status (%lu)\n", |
| 1544 |
cfg->scan_status); |
| 1545 |
return -EAGAIN; |
| 1546 |
} |
| 1547 |
if (test_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status)) { |
| 1548 |
bphy_err(drvr, "Scanning being aborted: status (%lu)\n", |
| 1549 |
cfg->scan_status); |
| 1550 |
return -EAGAIN; |
| 1551 |
} |
| 1552 |
if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) { |
| 1553 |
bphy_err(drvr, "Scanning suppressed: status (%lu)\n", |
| 1554 |
cfg->scan_status); |
| 1555 |
return -EAGAIN; |
| 1556 |
} |
| 1557 |
if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state)) { |
| 1558 |
bphy_err(drvr, "Connecting: status (%lu)\n", vif->sme_state); |
| 1559 |
return -EAGAIN; |
| 1560 |
} |
| 1561 |
|
| 1562 |
brcmf_dbg(SCAN, "START ESCAN\n"); |
| 1563 |
|
| 1564 |
cfg->scan_request = request; |
| 1565 |
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); |
| 1566 |
|
| 1567 |
cfg->escan_info.run = brcmf_run_escan; |
| 1568 |
err = brcmf_p2p_scan_prep(wiphy, request, vif); |
| 1569 |
if (err) |
| 1570 |
goto scan_out; |
| 1571 |
|
| 1572 |
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, |
| 1573 |
request->ie, request->ie_len); |
| 1574 |
if (err) |
| 1575 |
goto scan_out; |
| 1576 |
|
| 1577 |
/* If scan req comes for p2p0, send it over primary I/F */ |
| 1578 |
if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) |
| 1579 |
vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; |
| 1580 |
|
| 1581 |
err = brcmf_do_escan(vif->ifp, request); |
| 1582 |
if (err) |
| 1583 |
goto scan_out; |
| 1584 |
|
| 1585 |
/* Arm scan timeout timer */ |
| 1586 |
mod_timer(&cfg->escan_timeout, |
| 1587 |
jiffies + msecs_to_jiffies(BRCMF_ESCAN_TIMER_INTERVAL_MS)); |
| 1588 |
|
| 1589 |
return 0; |
| 1590 |
|
| 1591 |
scan_out: |
| 1592 |
bphy_err(drvr, "scan error (%d)\n", err); |
| 1593 |
clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); |
| 1594 |
cfg->scan_request = NULL; |
| 1595 |
return err; |
| 1596 |
} |
| 1597 |
|
| 1598 |
static s32 brcmf_set_rts(struct net_device *ndev, u32 rts_threshold) |
| 1599 |
{ |
| 1600 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1601 |
struct brcmf_pub *drvr = ifp->drvr; |
| 1602 |
s32 err = 0; |
| 1603 |
|
| 1604 |
err = brcmf_fil_iovar_int_set(ifp, "rtsthresh", rts_threshold); |
| 1605 |
if (err) |
| 1606 |
bphy_err(drvr, "Error (%d)\n", err); |
| 1607 |
|
| 1608 |
return err; |
| 1609 |
} |
| 1610 |
|
| 1611 |
static s32 brcmf_set_frag(struct net_device *ndev, u32 frag_threshold) |
| 1612 |
{ |
| 1613 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1614 |
struct brcmf_pub *drvr = ifp->drvr; |
| 1615 |
s32 err = 0; |
| 1616 |
|
| 1617 |
err = brcmf_fil_iovar_int_set(ifp, "fragthresh", |
| 1618 |
frag_threshold); |
| 1619 |
if (err) |
| 1620 |
bphy_err(drvr, "Error (%d)\n", err); |
| 1621 |
|
| 1622 |
return err; |
| 1623 |
} |
| 1624 |
|
| 1625 |
static s32 brcmf_set_retry(struct net_device *ndev, u32 retry, bool l) |
| 1626 |
{ |
| 1627 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1628 |
struct brcmf_pub *drvr = ifp->drvr; |
| 1629 |
s32 err = 0; |
| 1630 |
u32 cmd = (l ? BRCMF_C_SET_LRL : BRCMF_C_SET_SRL); |
| 1631 |
|
| 1632 |
err = brcmf_fil_cmd_int_set(ifp, cmd, retry); |
| 1633 |
if (err) { |
| 1634 |
bphy_err(drvr, "cmd (%d) , error (%d)\n", cmd, err); |
| 1635 |
return err; |
| 1636 |
} |
| 1637 |
return err; |
| 1638 |
} |
| 1639 |
|
| 1640 |
static s32 brcmf_cfg80211_set_wiphy_params(struct wiphy *wiphy, int radio_idx, |
| 1641 |
u32 changed) |
| 1642 |
{ |
| 1643 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 1644 |
struct net_device *ndev = cfg_to_ndev(cfg); |
| 1645 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1646 |
s32 err = 0; |
| 1647 |
|
| 1648 |
brcmf_dbg(TRACE, "Enter\n"); |
| 1649 |
if (!check_vif_up(ifp->vif)) |
| 1650 |
return -EIO; |
| 1651 |
|
| 1652 |
if (changed & WIPHY_PARAM_RTS_THRESHOLD && |
| 1653 |
(cfg->conf->rts_threshold != wiphy->rts_threshold)) { |
| 1654 |
cfg->conf->rts_threshold = wiphy->rts_threshold; |
| 1655 |
err = brcmf_set_rts(ndev, cfg->conf->rts_threshold); |
| 1656 |
if (!err) |
| 1657 |
goto done; |
| 1658 |
} |
| 1659 |
if (changed & WIPHY_PARAM_FRAG_THRESHOLD && |
| 1660 |
(cfg->conf->frag_threshold != wiphy->frag_threshold)) { |
| 1661 |
cfg->conf->frag_threshold = wiphy->frag_threshold; |
| 1662 |
err = brcmf_set_frag(ndev, cfg->conf->frag_threshold); |
| 1663 |
if (!err) |
| 1664 |
goto done; |
| 1665 |
} |
| 1666 |
if (changed & WIPHY_PARAM_RETRY_LONG |
| 1667 |
&& (cfg->conf->retry_long != wiphy->retry_long)) { |
| 1668 |
cfg->conf->retry_long = wiphy->retry_long; |
| 1669 |
err = brcmf_set_retry(ndev, cfg->conf->retry_long, true); |
| 1670 |
if (!err) |
| 1671 |
goto done; |
| 1672 |
} |
| 1673 |
if (changed & WIPHY_PARAM_RETRY_SHORT |
| 1674 |
&& (cfg->conf->retry_short != wiphy->retry_short)) { |
| 1675 |
cfg->conf->retry_short = wiphy->retry_short; |
| 1676 |
err = brcmf_set_retry(ndev, cfg->conf->retry_short, false); |
| 1677 |
if (!err) |
| 1678 |
goto done; |
| 1679 |
} |
| 1680 |
|
| 1681 |
done: |
| 1682 |
brcmf_dbg(TRACE, "Exit\n"); |
| 1683 |
return err; |
| 1684 |
} |
| 1685 |
|
| 1686 |
static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof) |
| 1687 |
{ |
| 1688 |
memset(prof, 0, sizeof(*prof)); |
| 1689 |
} |
| 1690 |
|
| 1691 |
static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e) |
| 1692 |
{ |
| 1693 |
u16 reason; |
| 1694 |
|
| 1695 |
switch (e->event_code) { |
| 1696 |
case BRCMF_E_DEAUTH: |
| 1697 |
case BRCMF_E_DEAUTH_IND: |
| 1698 |
case BRCMF_E_DISASSOC_IND: |
| 1699 |
reason = e->reason; |
| 1700 |
break; |
| 1701 |
case BRCMF_E_LINK: |
| 1702 |
default: |
| 1703 |
reason = 0; |
| 1704 |
break; |
| 1705 |
} |
| 1706 |
return reason; |
| 1707 |
} |
| 1708 |
|
| 1709 |
int brcmf_set_wsec(struct brcmf_if *ifp, const u8 *key, u16 key_len, u16 flags) |
| 1710 |
{ |
| 1711 |
struct brcmf_pub *drvr = ifp->drvr; |
| 1712 |
struct brcmf_wsec_pmk_le pmk; |
| 1713 |
int err; |
| 1714 |
|
| 1715 |
if (key_len > sizeof(pmk.key)) { |
| 1716 |
bphy_err(drvr, "key must be less than %zu bytes\n", |
| 1717 |
sizeof(pmk.key)); |
| 1718 |
return -EINVAL; |
| 1719 |
} |
| 1720 |
|
| 1721 |
memset(&pmk, 0, sizeof(pmk)); |
| 1722 |
|
| 1723 |
/* pass key material directly */ |
| 1724 |
pmk.key_len = cpu_to_le16(key_len); |
| 1725 |
pmk.flags = cpu_to_le16(flags); |
| 1726 |
memcpy(pmk.key, key, key_len); |
| 1727 |
|
| 1728 |
/* store key material in firmware */ |
| 1729 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK, |
| 1730 |
&pmk, sizeof(pmk)); |
| 1731 |
if (err < 0) |
| 1732 |
bphy_err(drvr, "failed to change PSK in firmware (len=%u)\n", |
| 1733 |
key_len); |
| 1734 |
|
| 1735 |
return err; |
| 1736 |
} |
| 1737 |
BRCMF_EXPORT_SYMBOL_GPL(brcmf_set_wsec); |
| 1738 |
|
| 1739 |
static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) |
| 1740 |
{ |
| 1741 |
return brcmf_set_wsec(ifp, pmk_data, pmk_len, 0); |
| 1742 |
} |
| 1743 |
|
| 1744 |
static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason, |
| 1745 |
bool locally_generated) |
| 1746 |
{ |
| 1747 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy); |
| 1748 |
struct brcmf_pub *drvr = cfg->pub; |
| 1749 |
bool bus_up = drvr->bus_if->state == BRCMF_BUS_UP; |
| 1750 |
s32 err = 0; |
| 1751 |
|
| 1752 |
brcmf_dbg(TRACE, "Enter\n"); |
| 1753 |
|
| 1754 |
if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) { |
| 1755 |
if (bus_up) { |
| 1756 |
brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n"); |
| 1757 |
err = brcmf_fil_cmd_data_set(vif->ifp, |
| 1758 |
BRCMF_C_DISASSOC, NULL, 0); |
| 1759 |
if (err) |
| 1760 |
bphy_err(drvr, "WLC_DISASSOC failed (%d)\n", |
| 1761 |
err); |
| 1762 |
} |
| 1763 |
|
| 1764 |
if ((vif->wdev.iftype == NL80211_IFTYPE_STATION) || |
| 1765 |
(vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT)) |
| 1766 |
cfg80211_disconnected(vif->wdev.netdev, reason, NULL, 0, |
| 1767 |
locally_generated, GFP_KERNEL); |
| 1768 |
} |
| 1769 |
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state); |
| 1770 |
clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state); |
| 1771 |
clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state); |
| 1772 |
clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status); |
| 1773 |
brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_ENABLED, 0); |
| 1774 |
if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_NONE) { |
| 1775 |
if (bus_up) |
| 1776 |
brcmf_set_pmk(vif->ifp, NULL, 0); |
| 1777 |
vif->profile.use_fwsup = BRCMF_PROFILE_FWSUP_NONE; |
| 1778 |
} |
| 1779 |
brcmf_dbg(TRACE, "Exit\n"); |
| 1780 |
} |
| 1781 |
|
| 1782 |
static s32 |
| 1783 |
brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev, |
| 1784 |
struct cfg80211_ibss_params *params) |
| 1785 |
{ |
| 1786 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 1787 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1788 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 1789 |
struct brcmf_pub *drvr = cfg->pub; |
| 1790 |
struct brcmf_join_params join_params; |
| 1791 |
size_t join_params_size = 0; |
| 1792 |
s32 err = 0; |
| 1793 |
s32 wsec = 0; |
| 1794 |
s32 bcnprd; |
| 1795 |
u16 chanspec; |
| 1796 |
u32 ssid_len; |
| 1797 |
|
| 1798 |
brcmf_dbg(TRACE, "Enter\n"); |
| 1799 |
if (!check_vif_up(ifp->vif)) |
| 1800 |
return -EIO; |
| 1801 |
|
| 1802 |
if (params->ssid) |
| 1803 |
brcmf_dbg(CONN, "SSID: %s\n", params->ssid); |
| 1804 |
else { |
| 1805 |
brcmf_dbg(CONN, "SSID: NULL, Not supported\n"); |
| 1806 |
return -EOPNOTSUPP; |
| 1807 |
} |
| 1808 |
|
| 1809 |
set_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); |
| 1810 |
|
| 1811 |
if (params->bssid) |
| 1812 |
brcmf_dbg(CONN, "BSSID: %pM\n", params->bssid); |
| 1813 |
else |
| 1814 |
brcmf_dbg(CONN, "No BSSID specified\n"); |
| 1815 |
|
| 1816 |
if (params->chandef.chan) |
| 1817 |
brcmf_dbg(CONN, "channel: %d\n", |
| 1818 |
params->chandef.chan->center_freq); |
| 1819 |
else |
| 1820 |
brcmf_dbg(CONN, "no channel specified\n"); |
| 1821 |
|
| 1822 |
if (params->channel_fixed) |
| 1823 |
brcmf_dbg(CONN, "fixed channel required\n"); |
| 1824 |
else |
| 1825 |
brcmf_dbg(CONN, "no fixed channel required\n"); |
| 1826 |
|
| 1827 |
if (params->ie && params->ie_len) |
| 1828 |
brcmf_dbg(CONN, "ie len: %d\n", params->ie_len); |
| 1829 |
else |
| 1830 |
brcmf_dbg(CONN, "no ie specified\n"); |
| 1831 |
|
| 1832 |
if (params->beacon_interval) |
| 1833 |
brcmf_dbg(CONN, "beacon interval: %d\n", |
| 1834 |
params->beacon_interval); |
| 1835 |
else |
| 1836 |
brcmf_dbg(CONN, "no beacon interval specified\n"); |
| 1837 |
|
| 1838 |
if (params->basic_rates) |
| 1839 |
brcmf_dbg(CONN, "basic rates: %08X\n", params->basic_rates); |
| 1840 |
else |
| 1841 |
brcmf_dbg(CONN, "no basic rates specified\n"); |
| 1842 |
|
| 1843 |
if (params->privacy) |
| 1844 |
brcmf_dbg(CONN, "privacy required\n"); |
| 1845 |
else |
| 1846 |
brcmf_dbg(CONN, "no privacy required\n"); |
| 1847 |
|
| 1848 |
/* Configure Privacy for starter */ |
| 1849 |
if (params->privacy) |
| 1850 |
wsec |= WEP_ENABLED; |
| 1851 |
|
| 1852 |
err = brcmf_fil_iovar_int_set(ifp, "wsec", wsec); |
| 1853 |
if (err) { |
| 1854 |
bphy_err(drvr, "wsec failed (%d)\n", err); |
| 1855 |
goto done; |
| 1856 |
} |
| 1857 |
|
| 1858 |
/* Configure Beacon Interval for starter */ |
| 1859 |
if (params->beacon_interval) |
| 1860 |
bcnprd = params->beacon_interval; |
| 1861 |
else |
| 1862 |
bcnprd = 100; |
| 1863 |
|
| 1864 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, bcnprd); |
| 1865 |
if (err) { |
| 1866 |
bphy_err(drvr, "WLC_SET_BCNPRD failed (%d)\n", err); |
| 1867 |
goto done; |
| 1868 |
} |
| 1869 |
|
| 1870 |
/* Configure required join parameter */ |
| 1871 |
memset(&join_params, 0, sizeof(struct brcmf_join_params)); |
| 1872 |
|
| 1873 |
/* SSID */ |
| 1874 |
ssid_len = min_t(u32, params->ssid_len, IEEE80211_MAX_SSID_LEN); |
| 1875 |
memcpy(join_params.ssid_le.SSID, params->ssid, ssid_len); |
| 1876 |
join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len); |
| 1877 |
join_params_size = sizeof(join_params.ssid_le); |
| 1878 |
|
| 1879 |
/* BSSID */ |
| 1880 |
if (params->bssid) { |
| 1881 |
memcpy(join_params.params_le.bssid, params->bssid, ETH_ALEN); |
| 1882 |
join_params_size += BRCMF_ASSOC_PARAMS_FIXED_SIZE; |
| 1883 |
memcpy(profile->bssid, params->bssid, ETH_ALEN); |
| 1884 |
} else { |
| 1885 |
eth_broadcast_addr(join_params.params_le.bssid); |
| 1886 |
eth_zero_addr(profile->bssid); |
| 1887 |
} |
| 1888 |
|
| 1889 |
/* Channel */ |
| 1890 |
if (params->chandef.chan) { |
| 1891 |
u32 target_channel; |
| 1892 |
|
| 1893 |
cfg->channel = |
| 1894 |
ieee80211_frequency_to_channel( |
| 1895 |
params->chandef.chan->center_freq); |
| 1896 |
if (params->channel_fixed) { |
| 1897 |
/* adding chanspec */ |
| 1898 |
chanspec = chandef_to_chanspec(&cfg->d11inf, |
| 1899 |
¶ms->chandef); |
| 1900 |
join_params.params_le.chanspec_list[0] = |
| 1901 |
cpu_to_le16(chanspec); |
| 1902 |
join_params.params_le.chanspec_num = cpu_to_le32(1); |
| 1903 |
join_params_size += sizeof(join_params.params_le); |
| 1904 |
} |
| 1905 |
|
| 1906 |
/* set channel for starter */ |
| 1907 |
target_channel = cfg->channel; |
| 1908 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_CHANNEL, |
| 1909 |
target_channel); |
| 1910 |
if (err) { |
| 1911 |
bphy_err(drvr, "WLC_SET_CHANNEL failed (%d)\n", err); |
| 1912 |
goto done; |
| 1913 |
} |
| 1914 |
} else |
| 1915 |
cfg->channel = 0; |
| 1916 |
|
| 1917 |
cfg->ibss_starter = false; |
| 1918 |
|
| 1919 |
|
| 1920 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, |
| 1921 |
&join_params, join_params_size); |
| 1922 |
if (err) { |
| 1923 |
bphy_err(drvr, "WLC_SET_SSID failed (%d)\n", err); |
| 1924 |
goto done; |
| 1925 |
} |
| 1926 |
|
| 1927 |
done: |
| 1928 |
if (err) |
| 1929 |
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); |
| 1930 |
brcmf_dbg(TRACE, "Exit\n"); |
| 1931 |
return err; |
| 1932 |
} |
| 1933 |
|
| 1934 |
static s32 |
| 1935 |
brcmf_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *ndev) |
| 1936 |
{ |
| 1937 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1938 |
|
| 1939 |
brcmf_dbg(TRACE, "Enter\n"); |
| 1940 |
if (!check_vif_up(ifp->vif)) { |
| 1941 |
/* When driver is being unloaded, it can end up here. If an |
| 1942 |
* error is returned then later on a debug trace in the wireless |
| 1943 |
* core module will be printed. To avoid this 0 is returned. |
| 1944 |
*/ |
| 1945 |
return 0; |
| 1946 |
} |
| 1947 |
|
| 1948 |
brcmf_link_down(ifp->vif, WLAN_REASON_DEAUTH_LEAVING, true); |
| 1949 |
brcmf_net_setcarrier(ifp, false); |
| 1950 |
|
| 1951 |
brcmf_dbg(TRACE, "Exit\n"); |
| 1952 |
|
| 1953 |
return 0; |
| 1954 |
} |
| 1955 |
|
| 1956 |
static s32 brcmf_set_wpa_version(struct net_device *ndev, |
| 1957 |
struct cfg80211_connect_params *sme) |
| 1958 |
{ |
| 1959 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1960 |
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); |
| 1961 |
struct brcmf_pub *drvr = ifp->drvr; |
| 1962 |
struct brcmf_cfg80211_security *sec; |
| 1963 |
s32 val; |
| 1964 |
s32 err; |
| 1965 |
|
| 1966 |
if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_1) { |
| 1967 |
val = WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED; |
| 1968 |
} else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_2) { |
| 1969 |
if (drvr->bus_if->fwvid == BRCMF_FWVENDOR_CYW && |
| 1970 |
sme->crypto.akm_suites[0] == WLAN_AKM_SUITE_SAE) |
| 1971 |
val = WPA3_AUTH_SAE_PSK; |
| 1972 |
else |
| 1973 |
val = WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED; |
| 1974 |
} else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_3) { |
| 1975 |
val = WPA3_AUTH_SAE_PSK; |
| 1976 |
} else { |
| 1977 |
val = WPA_AUTH_DISABLED; |
| 1978 |
} |
| 1979 |
brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val); |
| 1980 |
err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", val); |
| 1981 |
if (err) { |
| 1982 |
bphy_err(drvr, "set wpa_auth failed (%d)\n", err); |
| 1983 |
return err; |
| 1984 |
} |
| 1985 |
sec = &profile->sec; |
| 1986 |
sec->wpa_versions = sme->crypto.wpa_versions; |
| 1987 |
return err; |
| 1988 |
} |
| 1989 |
|
| 1990 |
static s32 brcmf_set_auth_type(struct net_device *ndev, |
| 1991 |
struct cfg80211_connect_params *sme) |
| 1992 |
{ |
| 1993 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 1994 |
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); |
| 1995 |
struct brcmf_pub *drvr = ifp->drvr; |
| 1996 |
struct brcmf_cfg80211_security *sec; |
| 1997 |
s32 val = 0; |
| 1998 |
s32 err = 0; |
| 1999 |
|
| 2000 |
switch (sme->auth_type) { |
| 2001 |
case NL80211_AUTHTYPE_OPEN_SYSTEM: |
| 2002 |
val = 0; |
| 2003 |
brcmf_dbg(CONN, "open system\n"); |
| 2004 |
break; |
| 2005 |
case NL80211_AUTHTYPE_SHARED_KEY: |
| 2006 |
val = 1; |
| 2007 |
brcmf_dbg(CONN, "shared key\n"); |
| 2008 |
break; |
| 2009 |
case NL80211_AUTHTYPE_SAE: |
| 2010 |
val = 3; |
| 2011 |
brcmf_dbg(CONN, "SAE authentication\n"); |
| 2012 |
break; |
| 2013 |
default: |
| 2014 |
val = 2; |
| 2015 |
brcmf_dbg(CONN, "automatic, auth type (%d)\n", sme->auth_type); |
| 2016 |
break; |
| 2017 |
} |
| 2018 |
|
| 2019 |
err = brcmf_fil_bsscfg_int_set(ifp, "auth", val); |
| 2020 |
if (err) { |
| 2021 |
bphy_err(drvr, "set auth failed (%d)\n", err); |
| 2022 |
return err; |
| 2023 |
} |
| 2024 |
sec = &profile->sec; |
| 2025 |
sec->auth_type = sme->auth_type; |
| 2026 |
return err; |
| 2027 |
} |
| 2028 |
|
| 2029 |
static s32 |
| 2030 |
brcmf_set_wsec_mode(struct net_device *ndev, |
| 2031 |
struct cfg80211_connect_params *sme) |
| 2032 |
{ |
| 2033 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2034 |
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); |
| 2035 |
struct brcmf_pub *drvr = ifp->drvr; |
| 2036 |
struct brcmf_cfg80211_security *sec; |
| 2037 |
s32 pval = 0; |
| 2038 |
s32 gval = 0; |
| 2039 |
s32 wsec; |
| 2040 |
s32 err = 0; |
| 2041 |
|
| 2042 |
if (sme->crypto.n_ciphers_pairwise) { |
| 2043 |
switch (sme->crypto.ciphers_pairwise[0]) { |
| 2044 |
case WLAN_CIPHER_SUITE_WEP40: |
| 2045 |
case WLAN_CIPHER_SUITE_WEP104: |
| 2046 |
pval = WEP_ENABLED; |
| 2047 |
break; |
| 2048 |
case WLAN_CIPHER_SUITE_TKIP: |
| 2049 |
pval = TKIP_ENABLED; |
| 2050 |
break; |
| 2051 |
case WLAN_CIPHER_SUITE_CCMP: |
| 2052 |
pval = AES_ENABLED; |
| 2053 |
break; |
| 2054 |
case WLAN_CIPHER_SUITE_AES_CMAC: |
| 2055 |
pval = AES_ENABLED; |
| 2056 |
break; |
| 2057 |
default: |
| 2058 |
bphy_err(drvr, "invalid cipher pairwise (%d)\n", |
| 2059 |
sme->crypto.ciphers_pairwise[0]); |
| 2060 |
return -EINVAL; |
| 2061 |
} |
| 2062 |
} |
| 2063 |
if (sme->crypto.cipher_group) { |
| 2064 |
switch (sme->crypto.cipher_group) { |
| 2065 |
case WLAN_CIPHER_SUITE_WEP40: |
| 2066 |
case WLAN_CIPHER_SUITE_WEP104: |
| 2067 |
gval = WEP_ENABLED; |
| 2068 |
break; |
| 2069 |
case WLAN_CIPHER_SUITE_TKIP: |
| 2070 |
gval = TKIP_ENABLED; |
| 2071 |
break; |
| 2072 |
case WLAN_CIPHER_SUITE_CCMP: |
| 2073 |
gval = AES_ENABLED; |
| 2074 |
break; |
| 2075 |
case WLAN_CIPHER_SUITE_AES_CMAC: |
| 2076 |
gval = AES_ENABLED; |
| 2077 |
break; |
| 2078 |
default: |
| 2079 |
bphy_err(drvr, "invalid cipher group (%d)\n", |
| 2080 |
sme->crypto.cipher_group); |
| 2081 |
return -EINVAL; |
| 2082 |
} |
| 2083 |
} |
| 2084 |
|
| 2085 |
brcmf_dbg(CONN, "pval (%d) gval (%d)\n", pval, gval); |
| 2086 |
/* In case of privacy, but no security and WPS then simulate */ |
| 2087 |
/* setting AES. WPS-2.0 allows no security */ |
| 2088 |
if (brcmf_find_wpsie(sme->ie, sme->ie_len) && !pval && !gval && |
| 2089 |
sme->privacy) |
| 2090 |
pval = AES_ENABLED; |
| 2091 |
|
| 2092 |
wsec = pval | gval; |
| 2093 |
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec); |
| 2094 |
if (err) { |
| 2095 |
bphy_err(drvr, "error (%d)\n", err); |
| 2096 |
return err; |
| 2097 |
} |
| 2098 |
|
| 2099 |
sec = &profile->sec; |
| 2100 |
sec->cipher_pairwise = sme->crypto.ciphers_pairwise[0]; |
| 2101 |
sec->cipher_group = sme->crypto.cipher_group; |
| 2102 |
|
| 2103 |
return err; |
| 2104 |
} |
| 2105 |
|
| 2106 |
static s32 |
| 2107 |
brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) |
| 2108 |
{ |
| 2109 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2110 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 2111 |
struct brcmf_pub *drvr = ifp->drvr; |
| 2112 |
s32 val; |
| 2113 |
s32 err; |
| 2114 |
const struct brcmf_tlv *rsn_ie; |
| 2115 |
const u8 *ie; |
| 2116 |
u32 ie_len; |
| 2117 |
u32 offset; |
| 2118 |
u16 rsn_cap; |
| 2119 |
u32 mfp; |
| 2120 |
u16 count; |
| 2121 |
|
| 2122 |
profile->use_fwsup = BRCMF_PROFILE_FWSUP_NONE; |
| 2123 |
profile->is_ft = false; |
| 2124 |
|
| 2125 |
if (!sme->crypto.n_akm_suites) |
| 2126 |
return 0; |
| 2127 |
|
| 2128 |
err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), |
| 2129 |
"wpa_auth", &val); |
| 2130 |
if (err) { |
| 2131 |
bphy_err(drvr, "could not get wpa_auth (%d)\n", err); |
| 2132 |
return err; |
| 2133 |
} |
| 2134 |
if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) { |
| 2135 |
switch (sme->crypto.akm_suites[0]) { |
| 2136 |
case WLAN_AKM_SUITE_8021X: |
| 2137 |
val = WPA_AUTH_UNSPECIFIED; |
| 2138 |
if (sme->want_1x) |
| 2139 |
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X; |
| 2140 |
break; |
| 2141 |
case WLAN_AKM_SUITE_PSK: |
| 2142 |
val = WPA_AUTH_PSK; |
| 2143 |
break; |
| 2144 |
default: |
| 2145 |
bphy_err(drvr, "invalid akm suite (%d)\n", |
| 2146 |
sme->crypto.akm_suites[0]); |
| 2147 |
return -EINVAL; |
| 2148 |
} |
| 2149 |
} else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) { |
| 2150 |
switch (sme->crypto.akm_suites[0]) { |
| 2151 |
case WLAN_AKM_SUITE_8021X: |
| 2152 |
val = WPA2_AUTH_UNSPECIFIED; |
| 2153 |
if (sme->want_1x) |
| 2154 |
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X; |
| 2155 |
break; |
| 2156 |
case WLAN_AKM_SUITE_8021X_SHA256: |
| 2157 |
val = WPA2_AUTH_1X_SHA256; |
| 2158 |
if (sme->want_1x) |
| 2159 |
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X; |
| 2160 |
break; |
| 2161 |
case WLAN_AKM_SUITE_PSK_SHA256: |
| 2162 |
val = WPA2_AUTH_PSK_SHA256; |
| 2163 |
break; |
| 2164 |
case WLAN_AKM_SUITE_PSK: |
| 2165 |
val = WPA2_AUTH_PSK; |
| 2166 |
break; |
| 2167 |
case WLAN_AKM_SUITE_FT_8021X: |
| 2168 |
val = WPA2_AUTH_UNSPECIFIED | WPA2_AUTH_FT; |
| 2169 |
profile->is_ft = true; |
| 2170 |
if (sme->want_1x) |
| 2171 |
profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X; |
| 2172 |
break; |
| 2173 |
case WLAN_AKM_SUITE_FT_PSK: |
| 2174 |
val = WPA2_AUTH_PSK | WPA2_AUTH_FT; |
| 2175 |
profile->is_ft = true; |
| 2176 |
break; |
| 2177 |
default: |
| 2178 |
bphy_err(drvr, "invalid akm suite (%d)\n", |
| 2179 |
sme->crypto.akm_suites[0]); |
| 2180 |
return -EINVAL; |
| 2181 |
} |
| 2182 |
} else if (val & WPA3_AUTH_SAE_PSK) { |
| 2183 |
switch (sme->crypto.akm_suites[0]) { |
| 2184 |
case WLAN_AKM_SUITE_SAE: |
| 2185 |
val = WPA3_AUTH_SAE_PSK; |
| 2186 |
break; |
| 2187 |
case WLAN_AKM_SUITE_FT_OVER_SAE: |
| 2188 |
val = WPA3_AUTH_SAE_PSK | WPA2_AUTH_FT; |
| 2189 |
profile->is_ft = true; |
| 2190 |
break; |
| 2191 |
default: |
| 2192 |
bphy_err(drvr, "invalid akm suite (%d)\n", |
| 2193 |
sme->crypto.akm_suites[0]); |
| 2194 |
return -EINVAL; |
| 2195 |
} |
| 2196 |
if (sme->crypto.sae_pwd) { |
| 2197 |
profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE; |
| 2198 |
} |
| 2199 |
} |
| 2200 |
|
| 2201 |
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X) |
| 2202 |
brcmf_dbg(INFO, "using 1X offload\n"); |
| 2203 |
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE) |
| 2204 |
brcmf_dbg(INFO, "using SAE offload\n"); |
| 2205 |
|
| 2206 |
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) |
| 2207 |
goto skip_mfp_config; |
| 2208 |
/* The MFP mode (1 or 2) needs to be determined, parse IEs. The |
| 2209 |
* IE will not be verified, just a quick search for MFP config |
| 2210 |
*/ |
| 2211 |
rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, sme->ie_len, |
| 2212 |
WLAN_EID_RSN); |
| 2213 |
if (!rsn_ie) |
| 2214 |
goto skip_mfp_config; |
| 2215 |
ie = (const u8 *)rsn_ie; |
| 2216 |
ie_len = rsn_ie->len + TLV_HDR_LEN; |
| 2217 |
/* Skip unicast suite */ |
| 2218 |
offset = TLV_HDR_LEN + WPA_IE_VERSION_LEN + WPA_IE_MIN_OUI_LEN; |
| 2219 |
if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len) |
| 2220 |
goto skip_mfp_config; |
| 2221 |
/* Skip multicast suite */ |
| 2222 |
count = ie[offset] + (ie[offset + 1] << 8); |
| 2223 |
offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN); |
| 2224 |
if (offset + WPA_IE_SUITE_COUNT_LEN >= ie_len) |
| 2225 |
goto skip_mfp_config; |
| 2226 |
/* Skip auth key management suite(s) */ |
| 2227 |
count = ie[offset] + (ie[offset + 1] << 8); |
| 2228 |
offset += WPA_IE_SUITE_COUNT_LEN + (count * WPA_IE_MIN_OUI_LEN); |
| 2229 |
if (offset + WPA_IE_SUITE_COUNT_LEN > ie_len) |
| 2230 |
goto skip_mfp_config; |
| 2231 |
/* Ready to read capabilities */ |
| 2232 |
mfp = BRCMF_MFP_NONE; |
| 2233 |
rsn_cap = ie[offset] + (ie[offset + 1] << 8); |
| 2234 |
if (rsn_cap & RSN_CAP_MFPR_MASK) |
| 2235 |
mfp = BRCMF_MFP_REQUIRED; |
| 2236 |
else if (rsn_cap & RSN_CAP_MFPC_MASK) |
| 2237 |
mfp = BRCMF_MFP_CAPABLE; |
| 2238 |
brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "mfp", mfp); |
| 2239 |
|
| 2240 |
skip_mfp_config: |
| 2241 |
brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val); |
| 2242 |
err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val); |
| 2243 |
if (err) { |
| 2244 |
bphy_err(drvr, "could not set wpa_auth (%d)\n", err); |
| 2245 |
return err; |
| 2246 |
} |
| 2247 |
|
| 2248 |
return err; |
| 2249 |
} |
| 2250 |
|
| 2251 |
static s32 |
| 2252 |
brcmf_set_sharedkey(struct net_device *ndev, |
| 2253 |
struct cfg80211_connect_params *sme) |
| 2254 |
{ |
| 2255 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2256 |
struct brcmf_pub *drvr = ifp->drvr; |
| 2257 |
struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); |
| 2258 |
struct brcmf_cfg80211_security *sec; |
| 2259 |
struct brcmf_wsec_key key; |
| 2260 |
s32 val; |
| 2261 |
s32 err = 0; |
| 2262 |
|
| 2263 |
brcmf_dbg(CONN, "key len (%d)\n", sme->key_len); |
| 2264 |
|
| 2265 |
if (sme->key_len == 0) |
| 2266 |
return 0; |
| 2267 |
|
| 2268 |
sec = &profile->sec; |
| 2269 |
brcmf_dbg(CONN, "wpa_versions 0x%x cipher_pairwise 0x%x\n", |
| 2270 |
sec->wpa_versions, sec->cipher_pairwise); |
| 2271 |
|
| 2272 |
if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2 | |
| 2273 |
NL80211_WPA_VERSION_3)) |
| 2274 |
return 0; |
| 2275 |
|
| 2276 |
if (!(sec->cipher_pairwise & |
| 2277 |
(WLAN_CIPHER_SUITE_WEP40 | WLAN_CIPHER_SUITE_WEP104))) |
| 2278 |
return 0; |
| 2279 |
|
| 2280 |
memset(&key, 0, sizeof(key)); |
| 2281 |
key.len = (u32) sme->key_len; |
| 2282 |
key.index = (u32) sme->key_idx; |
| 2283 |
if (key.len > sizeof(key.data)) { |
| 2284 |
bphy_err(drvr, "Too long key length (%u)\n", key.len); |
| 2285 |
return -EINVAL; |
| 2286 |
} |
| 2287 |
memcpy(key.data, sme->key, key.len); |
| 2288 |
key.flags = BRCMF_PRIMARY_KEY; |
| 2289 |
switch (sec->cipher_pairwise) { |
| 2290 |
case WLAN_CIPHER_SUITE_WEP40: |
| 2291 |
key.algo = CRYPTO_ALGO_WEP1; |
| 2292 |
break; |
| 2293 |
case WLAN_CIPHER_SUITE_WEP104: |
| 2294 |
key.algo = CRYPTO_ALGO_WEP128; |
| 2295 |
break; |
| 2296 |
default: |
| 2297 |
bphy_err(drvr, "Invalid algorithm (%d)\n", |
| 2298 |
sme->crypto.ciphers_pairwise[0]); |
| 2299 |
return -EINVAL; |
| 2300 |
} |
| 2301 |
/* Set the new key/index */ |
| 2302 |
brcmf_dbg(CONN, "key length (%d) key index (%d) algo (%d)\n", |
| 2303 |
key.len, key.index, key.algo); |
| 2304 |
brcmf_dbg(CONN, "key \"%s\"\n", key.data); |
| 2305 |
err = send_key_to_dongle(ifp, &key); |
| 2306 |
if (err) |
| 2307 |
return err; |
| 2308 |
|
| 2309 |
if (sec->auth_type == NL80211_AUTHTYPE_SHARED_KEY) { |
| 2310 |
brcmf_dbg(CONN, "set auth_type to shared key\n"); |
| 2311 |
val = WL_AUTH_SHARED_KEY; /* shared key */ |
| 2312 |
err = brcmf_fil_bsscfg_int_set(ifp, "auth", val); |
| 2313 |
if (err) |
| 2314 |
bphy_err(drvr, "set auth failed (%d)\n", err); |
| 2315 |
} |
| 2316 |
return err; |
| 2317 |
} |
| 2318 |
|
| 2319 |
static |
| 2320 |
enum nl80211_auth_type brcmf_war_auth_type(struct brcmf_if *ifp, |
| 2321 |
enum nl80211_auth_type type) |
| 2322 |
{ |
| 2323 |
if (type == NL80211_AUTHTYPE_AUTOMATIC && |
| 2324 |
brcmf_feat_is_quirk_enabled(ifp, BRCMF_FEAT_QUIRK_AUTO_AUTH)) { |
| 2325 |
brcmf_dbg(CONN, "WAR: use OPEN instead of AUTO\n"); |
| 2326 |
type = NL80211_AUTHTYPE_OPEN_SYSTEM; |
| 2327 |
} |
| 2328 |
return type; |
| 2329 |
} |
| 2330 |
|
| 2331 |
static void brcmf_set_join_pref(struct brcmf_if *ifp, |
| 2332 |
struct cfg80211_bss_selection *bss_select) |
| 2333 |
{ |
| 2334 |
struct brcmf_pub *drvr = ifp->drvr; |
| 2335 |
struct brcmf_join_pref_params join_pref_params[2]; |
| 2336 |
enum nl80211_band band; |
| 2337 |
int err, i = 0; |
| 2338 |
|
| 2339 |
join_pref_params[i].len = 2; |
| 2340 |
join_pref_params[i].rssi_gain = 0; |
| 2341 |
|
| 2342 |
if (bss_select->behaviour != NL80211_BSS_SELECT_ATTR_BAND_PREF) |
| 2343 |
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_ASSOC_PREFER, WLC_BAND_AUTO); |
| 2344 |
|
| 2345 |
switch (bss_select->behaviour) { |
| 2346 |
case __NL80211_BSS_SELECT_ATTR_INVALID: |
| 2347 |
brcmf_c_set_joinpref_default(ifp); |
| 2348 |
return; |
| 2349 |
case NL80211_BSS_SELECT_ATTR_BAND_PREF: |
| 2350 |
join_pref_params[i].type = BRCMF_JOIN_PREF_BAND; |
| 2351 |
band = bss_select->param.band_pref; |
| 2352 |
join_pref_params[i].band = nl80211_band_to_fwil(band); |
| 2353 |
i++; |
| 2354 |
break; |
| 2355 |
case NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: |
| 2356 |
join_pref_params[i].type = BRCMF_JOIN_PREF_RSSI_DELTA; |
| 2357 |
band = bss_select->param.adjust.band; |
| 2358 |
join_pref_params[i].band = nl80211_band_to_fwil(band); |
| 2359 |
join_pref_params[i].rssi_gain = bss_select->param.adjust.delta; |
| 2360 |
i++; |
| 2361 |
break; |
| 2362 |
case NL80211_BSS_SELECT_ATTR_RSSI: |
| 2363 |
default: |
| 2364 |
break; |
| 2365 |
} |
| 2366 |
join_pref_params[i].type = BRCMF_JOIN_PREF_RSSI; |
| 2367 |
join_pref_params[i].len = 2; |
| 2368 |
join_pref_params[i].rssi_gain = 0; |
| 2369 |
join_pref_params[i].band = 0; |
| 2370 |
err = brcmf_fil_iovar_data_set(ifp, "join_pref", join_pref_params, |
| 2371 |
sizeof(join_pref_params)); |
| 2372 |
if (err) |
| 2373 |
bphy_err(drvr, "Set join_pref error (%d)\n", err); |
| 2374 |
} |
| 2375 |
|
| 2376 |
static s32 |
| 2377 |
brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, |
| 2378 |
struct cfg80211_connect_params *sme) |
| 2379 |
{ |
| 2380 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 2381 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2382 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 2383 |
struct ieee80211_channel *chan = sme->channel; |
| 2384 |
struct brcmf_pub *drvr = ifp->drvr; |
| 2385 |
struct brcmf_join_params join_params; |
| 2386 |
size_t join_params_size; |
| 2387 |
const struct brcmf_tlv *rsn_ie; |
| 2388 |
const struct brcmf_vs_tlv *wpa_ie; |
| 2389 |
const void *ie; |
| 2390 |
u32 ie_len; |
| 2391 |
struct brcmf_ext_join_params_le *ext_join_params; |
| 2392 |
u16 chanspec; |
| 2393 |
s32 err = 0; |
| 2394 |
u32 ssid_len; |
| 2395 |
|
| 2396 |
brcmf_dbg(TRACE, "Enter\n"); |
| 2397 |
if (!check_vif_up(ifp->vif)) |
| 2398 |
return -EIO; |
| 2399 |
|
| 2400 |
if (!sme->ssid) { |
| 2401 |
bphy_err(drvr, "Invalid ssid\n"); |
| 2402 |
return -EOPNOTSUPP; |
| 2403 |
} |
| 2404 |
|
| 2405 |
if (sme->channel_hint) |
| 2406 |
chan = sme->channel_hint; |
| 2407 |
|
| 2408 |
if (sme->bssid_hint) |
| 2409 |
sme->bssid = sme->bssid_hint; |
| 2410 |
|
| 2411 |
if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { |
| 2412 |
/* A normal (non P2P) connection request setup. */ |
| 2413 |
ie = NULL; |
| 2414 |
ie_len = 0; |
| 2415 |
/* find the WPA_IE */ |
| 2416 |
wpa_ie = brcmf_find_wpaie((u8 *)sme->ie, sme->ie_len); |
| 2417 |
if (wpa_ie) { |
| 2418 |
ie = wpa_ie; |
| 2419 |
ie_len = wpa_ie->len + TLV_HDR_LEN; |
| 2420 |
} else { |
| 2421 |
/* find the RSN_IE */ |
| 2422 |
rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, |
| 2423 |
sme->ie_len, |
| 2424 |
WLAN_EID_RSN); |
| 2425 |
if (rsn_ie) { |
| 2426 |
ie = rsn_ie; |
| 2427 |
ie_len = rsn_ie->len + TLV_HDR_LEN; |
| 2428 |
} |
| 2429 |
} |
| 2430 |
brcmf_fil_iovar_data_set(ifp, "wpaie", ie, ie_len); |
| 2431 |
} |
| 2432 |
|
| 2433 |
err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG, |
| 2434 |
sme->ie, sme->ie_len); |
| 2435 |
if (err) |
| 2436 |
bphy_err(drvr, "Set Assoc REQ IE Failed\n"); |
| 2437 |
else |
| 2438 |
brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n"); |
| 2439 |
|
| 2440 |
set_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); |
| 2441 |
|
| 2442 |
if (chan) { |
| 2443 |
cfg->channel = |
| 2444 |
ieee80211_frequency_to_channel(chan->center_freq); |
| 2445 |
chanspec = channel_to_chanspec(&cfg->d11inf, chan); |
| 2446 |
brcmf_dbg(CONN, "channel=%d, center_req=%d, chanspec=0x%04x\n", |
| 2447 |
cfg->channel, chan->center_freq, chanspec); |
| 2448 |
} else { |
| 2449 |
cfg->channel = 0; |
| 2450 |
chanspec = 0; |
| 2451 |
} |
| 2452 |
|
| 2453 |
brcmf_dbg(INFO, "ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len); |
| 2454 |
|
| 2455 |
err = brcmf_set_wpa_version(ndev, sme); |
| 2456 |
if (err) { |
| 2457 |
bphy_err(drvr, "wl_set_wpa_version failed (%d)\n", err); |
| 2458 |
goto done; |
| 2459 |
} |
| 2460 |
|
| 2461 |
sme->auth_type = brcmf_war_auth_type(ifp, sme->auth_type); |
| 2462 |
err = brcmf_set_auth_type(ndev, sme); |
| 2463 |
if (err) { |
| 2464 |
bphy_err(drvr, "wl_set_auth_type failed (%d)\n", err); |
| 2465 |
goto done; |
| 2466 |
} |
| 2467 |
|
| 2468 |
err = brcmf_set_wsec_mode(ndev, sme); |
| 2469 |
if (err) { |
| 2470 |
bphy_err(drvr, "wl_set_set_cipher failed (%d)\n", err); |
| 2471 |
goto done; |
| 2472 |
} |
| 2473 |
|
| 2474 |
err = brcmf_set_key_mgmt(ndev, sme); |
| 2475 |
if (err) { |
| 2476 |
bphy_err(drvr, "wl_set_key_mgmt failed (%d)\n", err); |
| 2477 |
goto done; |
| 2478 |
} |
| 2479 |
|
| 2480 |
err = brcmf_set_sharedkey(ndev, sme); |
| 2481 |
if (err) { |
| 2482 |
bphy_err(drvr, "brcmf_set_sharedkey failed (%d)\n", err); |
| 2483 |
goto done; |
| 2484 |
} |
| 2485 |
|
| 2486 |
if (sme->crypto.psk && |
| 2487 |
profile->use_fwsup != BRCMF_PROFILE_FWSUP_SAE) { |
| 2488 |
if (WARN_ON(profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE)) { |
| 2489 |
err = -EINVAL; |
| 2490 |
goto done; |
| 2491 |
} |
| 2492 |
brcmf_dbg(INFO, "using PSK offload\n"); |
| 2493 |
profile->use_fwsup = BRCMF_PROFILE_FWSUP_PSK; |
| 2494 |
} |
| 2495 |
|
| 2496 |
if (profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE) { |
| 2497 |
/* enable firmware supplicant for this interface */ |
| 2498 |
err = brcmf_fil_iovar_int_set(ifp, "sup_wpa", 1); |
| 2499 |
if (err < 0) { |
| 2500 |
bphy_err(drvr, "failed to enable fw supplicant\n"); |
| 2501 |
goto done; |
| 2502 |
} |
| 2503 |
} |
| 2504 |
|
| 2505 |
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK) |
| 2506 |
err = brcmf_set_pmk(ifp, sme->crypto.psk, |
| 2507 |
BRCMF_WSEC_MAX_PSK_LEN); |
| 2508 |
else if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE) { |
| 2509 |
/* clean up user-space RSNE */ |
| 2510 |
err = brcmf_fil_iovar_data_set(ifp, "wpaie", NULL, 0); |
| 2511 |
if (err) { |
| 2512 |
bphy_err(drvr, "failed to clean up user-space RSNE\n"); |
| 2513 |
goto done; |
| 2514 |
} |
| 2515 |
err = brcmf_fwvid_set_sae_password(ifp, &sme->crypto); |
| 2516 |
if (!err && sme->crypto.psk) |
| 2517 |
err = brcmf_set_pmk(ifp, sme->crypto.psk, |
| 2518 |
BRCMF_WSEC_MAX_PSK_LEN); |
| 2519 |
} |
| 2520 |
if (err) |
| 2521 |
goto done; |
| 2522 |
|
| 2523 |
/* Join with specific BSSID and cached SSID |
| 2524 |
* If SSID is zero join based on BSSID only |
| 2525 |
*/ |
| 2526 |
join_params_size = offsetof(struct brcmf_ext_join_params_le, assoc_le) + |
| 2527 |
offsetof(struct brcmf_assoc_params_le, chanspec_list); |
| 2528 |
if (cfg->channel) |
| 2529 |
join_params_size += sizeof(u16); |
| 2530 |
ext_join_params = kzalloc_obj(*ext_join_params); |
| 2531 |
if (ext_join_params == NULL) { |
| 2532 |
err = -ENOMEM; |
| 2533 |
goto done; |
| 2534 |
} |
| 2535 |
ssid_len = min_t(u32, sme->ssid_len, IEEE80211_MAX_SSID_LEN); |
| 2536 |
ext_join_params->ssid_le.SSID_len = cpu_to_le32(ssid_len); |
| 2537 |
memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, ssid_len); |
| 2538 |
if (ssid_len < IEEE80211_MAX_SSID_LEN) |
| 2539 |
brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n", |
| 2540 |
ext_join_params->ssid_le.SSID, ssid_len); |
| 2541 |
|
| 2542 |
/* Set up join scan parameters */ |
| 2543 |
ext_join_params->scan_le.scan_type = -1; |
| 2544 |
ext_join_params->scan_le.home_time = cpu_to_le32(-1); |
| 2545 |
|
| 2546 |
if (sme->bssid) |
| 2547 |
memcpy(&ext_join_params->assoc_le.bssid, sme->bssid, ETH_ALEN); |
| 2548 |
else |
| 2549 |
eth_broadcast_addr(ext_join_params->assoc_le.bssid); |
| 2550 |
|
| 2551 |
if (cfg->channel) { |
| 2552 |
ext_join_params->assoc_le.chanspec_num = cpu_to_le32(1); |
| 2553 |
|
| 2554 |
ext_join_params->assoc_le.chanspec_list[0] = |
| 2555 |
cpu_to_le16(chanspec); |
| 2556 |
/* Increase dwell time to receive probe response or detect |
| 2557 |
* beacon from target AP at a noisy air only during connect |
| 2558 |
* command. |
| 2559 |
*/ |
| 2560 |
ext_join_params->scan_le.active_time = |
| 2561 |
cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS); |
| 2562 |
ext_join_params->scan_le.passive_time = |
| 2563 |
cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS); |
| 2564 |
/* To sync with presence period of VSDB GO send probe request |
| 2565 |
* more frequently. Probe request will be stopped when it gets |
| 2566 |
* probe response from target AP/GO. |
| 2567 |
*/ |
| 2568 |
ext_join_params->scan_le.nprobes = |
| 2569 |
cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS / |
| 2570 |
BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS); |
| 2571 |
} else { |
| 2572 |
ext_join_params->scan_le.active_time = cpu_to_le32(-1); |
| 2573 |
ext_join_params->scan_le.passive_time = cpu_to_le32(-1); |
| 2574 |
ext_join_params->scan_le.nprobes = cpu_to_le32(-1); |
| 2575 |
} |
| 2576 |
|
| 2577 |
brcmf_set_join_pref(ifp, &sme->bss_select); |
| 2578 |
|
| 2579 |
err = brcmf_fil_bsscfg_data_set(ifp, "join", ext_join_params, |
| 2580 |
join_params_size); |
| 2581 |
kfree(ext_join_params); |
| 2582 |
if (!err) |
| 2583 |
/* This is it. join command worked, we are done */ |
| 2584 |
goto done; |
| 2585 |
|
| 2586 |
/* join command failed, fallback to set ssid */ |
| 2587 |
memset(&join_params, 0, sizeof(join_params)); |
| 2588 |
join_params_size = sizeof(join_params.ssid_le); |
| 2589 |
|
| 2590 |
memcpy(&join_params.ssid_le.SSID, sme->ssid, ssid_len); |
| 2591 |
join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len); |
| 2592 |
|
| 2593 |
if (sme->bssid) |
| 2594 |
memcpy(join_params.params_le.bssid, sme->bssid, ETH_ALEN); |
| 2595 |
else |
| 2596 |
eth_broadcast_addr(join_params.params_le.bssid); |
| 2597 |
|
| 2598 |
if (cfg->channel) { |
| 2599 |
join_params.params_le.chanspec_list[0] = cpu_to_le16(chanspec); |
| 2600 |
join_params.params_le.chanspec_num = cpu_to_le32(1); |
| 2601 |
join_params_size += sizeof(join_params.params_le); |
| 2602 |
} |
| 2603 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, |
| 2604 |
&join_params, join_params_size); |
| 2605 |
if (err) |
| 2606 |
bphy_err(drvr, "BRCMF_C_SET_SSID failed (%d)\n", err); |
| 2607 |
|
| 2608 |
done: |
| 2609 |
if (err) |
| 2610 |
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); |
| 2611 |
brcmf_dbg(TRACE, "Exit\n"); |
| 2612 |
return err; |
| 2613 |
} |
| 2614 |
|
| 2615 |
static s32 |
| 2616 |
brcmf_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *ndev, |
| 2617 |
u16 reason_code) |
| 2618 |
{ |
| 2619 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 2620 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2621 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 2622 |
struct brcmf_pub *drvr = cfg->pub; |
| 2623 |
struct brcmf_scb_val_le scbval; |
| 2624 |
s32 err = 0; |
| 2625 |
|
| 2626 |
brcmf_dbg(TRACE, "Enter. Reason code = %d\n", reason_code); |
| 2627 |
if (!check_vif_up(ifp->vif)) |
| 2628 |
return -EIO; |
| 2629 |
|
| 2630 |
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state); |
| 2631 |
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); |
| 2632 |
clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &ifp->vif->sme_state); |
| 2633 |
clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &ifp->vif->sme_state); |
| 2634 |
cfg80211_disconnected(ndev, reason_code, NULL, 0, true, GFP_KERNEL); |
| 2635 |
|
| 2636 |
memcpy(&scbval.ea, &profile->bssid, ETH_ALEN); |
| 2637 |
scbval.val = cpu_to_le32(reason_code); |
| 2638 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_DISASSOC, |
| 2639 |
&scbval, sizeof(scbval)); |
| 2640 |
if (err) |
| 2641 |
bphy_err(drvr, "error (%d)\n", err); |
| 2642 |
|
| 2643 |
brcmf_dbg(TRACE, "Exit\n"); |
| 2644 |
return err; |
| 2645 |
} |
| 2646 |
|
| 2647 |
static s32 |
| 2648 |
brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, |
| 2649 |
int radio_idx, enum nl80211_tx_power_setting type, |
| 2650 |
s32 mbm) |
| 2651 |
{ |
| 2652 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 2653 |
struct net_device *ndev = cfg_to_ndev(cfg); |
| 2654 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2655 |
struct brcmf_pub *drvr = cfg->pub; |
| 2656 |
s32 err; |
| 2657 |
s32 disable; |
| 2658 |
u32 qdbm = 127; |
| 2659 |
|
| 2660 |
brcmf_dbg(TRACE, "Enter %d %d\n", type, mbm); |
| 2661 |
if (!check_vif_up(ifp->vif)) |
| 2662 |
return -EIO; |
| 2663 |
|
| 2664 |
switch (type) { |
| 2665 |
case NL80211_TX_POWER_AUTOMATIC: |
| 2666 |
break; |
| 2667 |
case NL80211_TX_POWER_LIMITED: |
| 2668 |
case NL80211_TX_POWER_FIXED: |
| 2669 |
if (mbm < 0) { |
| 2670 |
bphy_err(drvr, "TX_POWER_FIXED - dbm is negative\n"); |
| 2671 |
err = -EINVAL; |
| 2672 |
goto done; |
| 2673 |
} |
| 2674 |
qdbm = MBM_TO_DBM(4 * mbm); |
| 2675 |
if (qdbm > 127) |
| 2676 |
qdbm = 127; |
| 2677 |
qdbm |= WL_TXPWR_OVERRIDE; |
| 2678 |
break; |
| 2679 |
default: |
| 2680 |
bphy_err(drvr, "Unsupported type %d\n", type); |
| 2681 |
err = -EINVAL; |
| 2682 |
goto done; |
| 2683 |
} |
| 2684 |
/* Make sure radio is off or on as far as software is concerned */ |
| 2685 |
disable = WL_RADIO_SW_DISABLE << 16; |
| 2686 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_RADIO, disable); |
| 2687 |
if (err) |
| 2688 |
bphy_err(drvr, "WLC_SET_RADIO error (%d)\n", err); |
| 2689 |
|
| 2690 |
err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm); |
| 2691 |
if (err) |
| 2692 |
bphy_err(drvr, "qtxpower error (%d)\n", err); |
| 2693 |
|
| 2694 |
done: |
| 2695 |
brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE); |
| 2696 |
return err; |
| 2697 |
} |
| 2698 |
|
| 2699 |
static s32 |
| 2700 |
brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, |
| 2701 |
int radio_idx, unsigned int link_id, s32 *dbm) |
| 2702 |
{ |
| 2703 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 2704 |
struct brcmf_cfg80211_vif *vif = wdev_to_vif(wdev); |
| 2705 |
struct brcmf_pub *drvr = cfg->pub; |
| 2706 |
s32 qdbm; |
| 2707 |
s32 err; |
| 2708 |
|
| 2709 |
brcmf_dbg(TRACE, "Enter\n"); |
| 2710 |
if (!check_vif_up(vif)) |
| 2711 |
return -EIO; |
| 2712 |
|
| 2713 |
err = brcmf_fil_iovar_int_get(vif->ifp, "qtxpower", &qdbm); |
| 2714 |
if (err) { |
| 2715 |
bphy_err(drvr, "error (%d)\n", err); |
| 2716 |
goto done; |
| 2717 |
} |
| 2718 |
*dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4; |
| 2719 |
|
| 2720 |
done: |
| 2721 |
brcmf_dbg(TRACE, "Exit (0x%x %d)\n", qdbm, *dbm); |
| 2722 |
return err; |
| 2723 |
} |
| 2724 |
|
| 2725 |
static s32 |
| 2726 |
brcmf_cfg80211_config_default_key(struct wiphy *wiphy, struct net_device *ndev, |
| 2727 |
int link_id, u8 key_idx, bool unicast, |
| 2728 |
bool multicast) |
| 2729 |
{ |
| 2730 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2731 |
struct brcmf_pub *drvr = ifp->drvr; |
| 2732 |
u32 index; |
| 2733 |
u32 wsec; |
| 2734 |
s32 err = 0; |
| 2735 |
|
| 2736 |
brcmf_dbg(TRACE, "Enter\n"); |
| 2737 |
brcmf_dbg(CONN, "key index (%d)\n", key_idx); |
| 2738 |
if (!check_vif_up(ifp->vif)) |
| 2739 |
return -EIO; |
| 2740 |
|
| 2741 |
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec); |
| 2742 |
if (err) { |
| 2743 |
bphy_err(drvr, "WLC_GET_WSEC error (%d)\n", err); |
| 2744 |
goto done; |
| 2745 |
} |
| 2746 |
|
| 2747 |
if (wsec & WEP_ENABLED) { |
| 2748 |
/* Just select a new current key */ |
| 2749 |
index = key_idx; |
| 2750 |
err = brcmf_fil_cmd_int_set(ifp, |
| 2751 |
BRCMF_C_SET_KEY_PRIMARY, index); |
| 2752 |
if (err) |
| 2753 |
bphy_err(drvr, "error (%d)\n", err); |
| 2754 |
} |
| 2755 |
done: |
| 2756 |
brcmf_dbg(TRACE, "Exit\n"); |
| 2757 |
return err; |
| 2758 |
} |
| 2759 |
|
| 2760 |
static s32 |
| 2761 |
brcmf_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, |
| 2762 |
int link_id, u8 key_idx, bool pairwise, |
| 2763 |
const u8 *mac_addr) |
| 2764 |
{ |
| 2765 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2766 |
struct brcmf_wsec_key *key; |
| 2767 |
s32 err; |
| 2768 |
|
| 2769 |
brcmf_dbg(TRACE, "Enter\n"); |
| 2770 |
brcmf_dbg(CONN, "key index (%d)\n", key_idx); |
| 2771 |
|
| 2772 |
if (!check_vif_up(ifp->vif)) |
| 2773 |
return -EIO; |
| 2774 |
|
| 2775 |
if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) { |
| 2776 |
/* we ignore this key index in this case */ |
| 2777 |
return -EINVAL; |
| 2778 |
} |
| 2779 |
|
| 2780 |
key = &ifp->vif->profile.key[key_idx]; |
| 2781 |
|
| 2782 |
if (key->algo == CRYPTO_ALGO_OFF) { |
| 2783 |
brcmf_dbg(CONN, "Ignore clearing of (never configured) key\n"); |
| 2784 |
return -EINVAL; |
| 2785 |
} |
| 2786 |
|
| 2787 |
memset(key, 0, sizeof(*key)); |
| 2788 |
key->index = (u32)key_idx; |
| 2789 |
key->flags = BRCMF_PRIMARY_KEY; |
| 2790 |
|
| 2791 |
/* Clear the key/index */ |
| 2792 |
err = send_key_to_dongle(ifp, key); |
| 2793 |
|
| 2794 |
brcmf_dbg(TRACE, "Exit\n"); |
| 2795 |
return err; |
| 2796 |
} |
| 2797 |
|
| 2798 |
static s32 |
| 2799 |
brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, |
| 2800 |
int link_id, u8 key_idx, bool pairwise, |
| 2801 |
const u8 *mac_addr, struct key_params *params) |
| 2802 |
{ |
| 2803 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 2804 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2805 |
struct brcmf_pub *drvr = cfg->pub; |
| 2806 |
struct brcmf_wsec_key *key; |
| 2807 |
s32 val; |
| 2808 |
s32 wsec; |
| 2809 |
s32 err; |
| 2810 |
u8 keybuf[8]; |
| 2811 |
bool ext_key; |
| 2812 |
|
| 2813 |
brcmf_dbg(TRACE, "Enter\n"); |
| 2814 |
brcmf_dbg(CONN, "key index (%d)\n", key_idx); |
| 2815 |
if (!check_vif_up(ifp->vif)) |
| 2816 |
return -EIO; |
| 2817 |
|
| 2818 |
if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) { |
| 2819 |
/* we ignore this key index in this case */ |
| 2820 |
bphy_err(drvr, "invalid key index (%d)\n", key_idx); |
| 2821 |
return -EINVAL; |
| 2822 |
} |
| 2823 |
|
| 2824 |
if (params->key_len == 0) |
| 2825 |
return brcmf_cfg80211_del_key(wiphy, ndev, -1, key_idx, |
| 2826 |
pairwise, mac_addr); |
| 2827 |
|
| 2828 |
if (params->key_len > sizeof(key->data)) { |
| 2829 |
bphy_err(drvr, "Too long key length (%u)\n", params->key_len); |
| 2830 |
return -EINVAL; |
| 2831 |
} |
| 2832 |
|
| 2833 |
ext_key = false; |
| 2834 |
if (mac_addr && (params->cipher != WLAN_CIPHER_SUITE_WEP40) && |
| 2835 |
(params->cipher != WLAN_CIPHER_SUITE_WEP104)) { |
| 2836 |
brcmf_dbg(TRACE, "Ext key, mac %pM", mac_addr); |
| 2837 |
ext_key = true; |
| 2838 |
} |
| 2839 |
|
| 2840 |
key = &ifp->vif->profile.key[key_idx]; |
| 2841 |
memset(key, 0, sizeof(*key)); |
| 2842 |
if ((ext_key) && (!is_multicast_ether_addr(mac_addr))) |
| 2843 |
memcpy((char *)&key->ea, (void *)mac_addr, ETH_ALEN); |
| 2844 |
key->len = params->key_len; |
| 2845 |
key->index = key_idx; |
| 2846 |
memcpy(key->data, params->key, key->len); |
| 2847 |
if (!ext_key) |
| 2848 |
key->flags = BRCMF_PRIMARY_KEY; |
| 2849 |
|
| 2850 |
if (params->seq && params->seq_len == 6) { |
| 2851 |
/* rx iv */ |
| 2852 |
u8 *ivptr; |
| 2853 |
|
| 2854 |
ivptr = (u8 *)params->seq; |
| 2855 |
key->rxiv.hi = (ivptr[5] << 24) | (ivptr[4] << 16) | |
| 2856 |
(ivptr[3] << 8) | ivptr[2]; |
| 2857 |
key->rxiv.lo = (ivptr[1] << 8) | ivptr[0]; |
| 2858 |
key->iv_initialized = true; |
| 2859 |
} |
| 2860 |
|
| 2861 |
switch (params->cipher) { |
| 2862 |
case WLAN_CIPHER_SUITE_WEP40: |
| 2863 |
key->algo = CRYPTO_ALGO_WEP1; |
| 2864 |
val = WEP_ENABLED; |
| 2865 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n"); |
| 2866 |
break; |
| 2867 |
case WLAN_CIPHER_SUITE_WEP104: |
| 2868 |
key->algo = CRYPTO_ALGO_WEP128; |
| 2869 |
val = WEP_ENABLED; |
| 2870 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n"); |
| 2871 |
break; |
| 2872 |
case WLAN_CIPHER_SUITE_TKIP: |
| 2873 |
if (!brcmf_is_apmode(ifp->vif)) { |
| 2874 |
brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); |
| 2875 |
memcpy(keybuf, &key->data[24], sizeof(keybuf)); |
| 2876 |
memcpy(&key->data[24], &key->data[16], sizeof(keybuf)); |
| 2877 |
memcpy(&key->data[16], keybuf, sizeof(keybuf)); |
| 2878 |
} |
| 2879 |
key->algo = CRYPTO_ALGO_TKIP; |
| 2880 |
val = TKIP_ENABLED; |
| 2881 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n"); |
| 2882 |
break; |
| 2883 |
case WLAN_CIPHER_SUITE_AES_CMAC: |
| 2884 |
key->algo = CRYPTO_ALGO_AES_CCM; |
| 2885 |
val = AES_ENABLED; |
| 2886 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n"); |
| 2887 |
break; |
| 2888 |
case WLAN_CIPHER_SUITE_CCMP: |
| 2889 |
key->algo = CRYPTO_ALGO_AES_CCM; |
| 2890 |
val = AES_ENABLED; |
| 2891 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n"); |
| 2892 |
break; |
| 2893 |
default: |
| 2894 |
bphy_err(drvr, "Invalid cipher (0x%x)\n", params->cipher); |
| 2895 |
err = -EINVAL; |
| 2896 |
goto done; |
| 2897 |
} |
| 2898 |
|
| 2899 |
err = send_key_to_dongle(ifp, key); |
| 2900 |
if (ext_key || err) |
| 2901 |
goto done; |
| 2902 |
|
| 2903 |
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec); |
| 2904 |
if (err) { |
| 2905 |
bphy_err(drvr, "get wsec error (%d)\n", err); |
| 2906 |
goto done; |
| 2907 |
} |
| 2908 |
wsec |= val; |
| 2909 |
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec); |
| 2910 |
if (err) { |
| 2911 |
bphy_err(drvr, "set wsec error (%d)\n", err); |
| 2912 |
goto done; |
| 2913 |
} |
| 2914 |
|
| 2915 |
done: |
| 2916 |
brcmf_dbg(TRACE, "Exit\n"); |
| 2917 |
return err; |
| 2918 |
} |
| 2919 |
|
| 2920 |
static s32 |
| 2921 |
brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, |
| 2922 |
int link_id, u8 key_idx, bool pairwise, |
| 2923 |
const u8 *mac_addr, void *cookie, |
| 2924 |
void (*callback)(void *cookie, |
| 2925 |
struct key_params *params)) |
| 2926 |
{ |
| 2927 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 2928 |
struct key_params params; |
| 2929 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2930 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 2931 |
struct brcmf_pub *drvr = cfg->pub; |
| 2932 |
struct brcmf_cfg80211_security *sec; |
| 2933 |
s32 wsec; |
| 2934 |
s32 err = 0; |
| 2935 |
|
| 2936 |
brcmf_dbg(TRACE, "Enter\n"); |
| 2937 |
brcmf_dbg(CONN, "key index (%d)\n", key_idx); |
| 2938 |
if (!check_vif_up(ifp->vif)) |
| 2939 |
return -EIO; |
| 2940 |
|
| 2941 |
memset(¶ms, 0, sizeof(params)); |
| 2942 |
|
| 2943 |
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec); |
| 2944 |
if (err) { |
| 2945 |
bphy_err(drvr, "WLC_GET_WSEC error (%d)\n", err); |
| 2946 |
/* Ignore this error, may happen during DISASSOC */ |
| 2947 |
err = -EAGAIN; |
| 2948 |
goto done; |
| 2949 |
} |
| 2950 |
if (wsec & WEP_ENABLED) { |
| 2951 |
sec = &profile->sec; |
| 2952 |
if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP40) { |
| 2953 |
params.cipher = WLAN_CIPHER_SUITE_WEP40; |
| 2954 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP40\n"); |
| 2955 |
} else if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP104) { |
| 2956 |
params.cipher = WLAN_CIPHER_SUITE_WEP104; |
| 2957 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n"); |
| 2958 |
} |
| 2959 |
} else if (wsec & TKIP_ENABLED) { |
| 2960 |
params.cipher = WLAN_CIPHER_SUITE_TKIP; |
| 2961 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n"); |
| 2962 |
} else if (wsec & AES_ENABLED) { |
| 2963 |
params.cipher = WLAN_CIPHER_SUITE_AES_CMAC; |
| 2964 |
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n"); |
| 2965 |
} else { |
| 2966 |
bphy_err(drvr, "Invalid algo (0x%x)\n", wsec); |
| 2967 |
err = -EINVAL; |
| 2968 |
goto done; |
| 2969 |
} |
| 2970 |
callback(cookie, ¶ms); |
| 2971 |
|
| 2972 |
done: |
| 2973 |
brcmf_dbg(TRACE, "Exit\n"); |
| 2974 |
return err; |
| 2975 |
} |
| 2976 |
|
| 2977 |
static s32 |
| 2978 |
brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy, |
| 2979 |
struct net_device *ndev, int link_id, |
| 2980 |
u8 key_idx) |
| 2981 |
{ |
| 2982 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 2983 |
|
| 2984 |
brcmf_dbg(TRACE, "Enter key_idx %d\n", key_idx); |
| 2985 |
|
| 2986 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) |
| 2987 |
return 0; |
| 2988 |
|
| 2989 |
brcmf_dbg(INFO, "Not supported\n"); |
| 2990 |
|
| 2991 |
return -EOPNOTSUPP; |
| 2992 |
} |
| 2993 |
|
| 2994 |
static void |
| 2995 |
brcmf_cfg80211_reconfigure_wep(struct brcmf_if *ifp) |
| 2996 |
{ |
| 2997 |
struct brcmf_pub *drvr = ifp->drvr; |
| 2998 |
s32 err; |
| 2999 |
u8 key_idx; |
| 3000 |
struct brcmf_wsec_key *key; |
| 3001 |
s32 wsec; |
| 3002 |
|
| 3003 |
for (key_idx = 0; key_idx < BRCMF_MAX_DEFAULT_KEYS; key_idx++) { |
| 3004 |
key = &ifp->vif->profile.key[key_idx]; |
| 3005 |
if ((key->algo == CRYPTO_ALGO_WEP1) || |
| 3006 |
(key->algo == CRYPTO_ALGO_WEP128)) |
| 3007 |
break; |
| 3008 |
} |
| 3009 |
if (key_idx == BRCMF_MAX_DEFAULT_KEYS) |
| 3010 |
return; |
| 3011 |
|
| 3012 |
err = send_key_to_dongle(ifp, key); |
| 3013 |
if (err) { |
| 3014 |
bphy_err(drvr, "Setting WEP key failed (%d)\n", err); |
| 3015 |
return; |
| 3016 |
} |
| 3017 |
err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec); |
| 3018 |
if (err) { |
| 3019 |
bphy_err(drvr, "get wsec error (%d)\n", err); |
| 3020 |
return; |
| 3021 |
} |
| 3022 |
wsec |= WEP_ENABLED; |
| 3023 |
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec); |
| 3024 |
if (err) |
| 3025 |
bphy_err(drvr, "set wsec error (%d)\n", err); |
| 3026 |
} |
| 3027 |
|
| 3028 |
static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si) |
| 3029 |
{ |
| 3030 |
struct nl80211_sta_flag_update *sfu; |
| 3031 |
|
| 3032 |
brcmf_dbg(TRACE, "flags %08x\n", fw_sta_flags); |
| 3033 |
si->filled |= BIT_ULL(NL80211_STA_INFO_STA_FLAGS); |
| 3034 |
sfu = &si->sta_flags; |
| 3035 |
sfu->mask = BIT(NL80211_STA_FLAG_WME) | |
| 3036 |
BIT(NL80211_STA_FLAG_AUTHENTICATED) | |
| 3037 |
BIT(NL80211_STA_FLAG_ASSOCIATED) | |
| 3038 |
BIT(NL80211_STA_FLAG_AUTHORIZED); |
| 3039 |
if (fw_sta_flags & BRCMF_STA_WME) |
| 3040 |
sfu->set |= BIT(NL80211_STA_FLAG_WME); |
| 3041 |
if (fw_sta_flags & BRCMF_STA_AUTHE) |
| 3042 |
sfu->set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); |
| 3043 |
if (fw_sta_flags & BRCMF_STA_ASSOC) |
| 3044 |
sfu->set |= BIT(NL80211_STA_FLAG_ASSOCIATED); |
| 3045 |
if (fw_sta_flags & BRCMF_STA_AUTHO) |
| 3046 |
sfu->set |= BIT(NL80211_STA_FLAG_AUTHORIZED); |
| 3047 |
} |
| 3048 |
|
| 3049 |
static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si) |
| 3050 |
{ |
| 3051 |
struct brcmf_pub *drvr = ifp->drvr; |
| 3052 |
struct { |
| 3053 |
__le32 len; |
| 3054 |
struct brcmf_bss_info_le bss_le; |
| 3055 |
} *buf; |
| 3056 |
u16 capability; |
| 3057 |
int err; |
| 3058 |
|
| 3059 |
buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); |
| 3060 |
if (!buf) |
| 3061 |
return; |
| 3062 |
|
| 3063 |
buf->len = cpu_to_le32(WL_BSS_INFO_MAX); |
| 3064 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf, |
| 3065 |
WL_BSS_INFO_MAX); |
| 3066 |
if (err) { |
| 3067 |
bphy_err(drvr, "Failed to get bss info (%d)\n", err); |
| 3068 |
goto out_kfree; |
| 3069 |
} |
| 3070 |
si->filled |= BIT_ULL(NL80211_STA_INFO_BSS_PARAM); |
| 3071 |
si->bss_param.beacon_interval = le16_to_cpu(buf->bss_le.beacon_period); |
| 3072 |
si->bss_param.dtim_period = buf->bss_le.dtim_period; |
| 3073 |
capability = le16_to_cpu(buf->bss_le.capability); |
| 3074 |
if (capability & IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT) |
| 3075 |
si->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT; |
| 3076 |
if (capability & WLAN_CAPABILITY_SHORT_PREAMBLE) |
| 3077 |
si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE; |
| 3078 |
if (capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) |
| 3079 |
si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME; |
| 3080 |
|
| 3081 |
out_kfree: |
| 3082 |
kfree(buf); |
| 3083 |
} |
| 3084 |
|
| 3085 |
static s32 |
| 3086 |
brcmf_cfg80211_get_station_ibss(struct brcmf_if *ifp, |
| 3087 |
struct station_info *sinfo) |
| 3088 |
{ |
| 3089 |
struct brcmf_pub *drvr = ifp->drvr; |
| 3090 |
struct brcmf_scb_val_le scbval; |
| 3091 |
struct brcmf_pktcnt_le pktcnt; |
| 3092 |
s32 err; |
| 3093 |
u32 rate; |
| 3094 |
u32 rssi; |
| 3095 |
|
| 3096 |
/* Get the current tx rate */ |
| 3097 |
err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate); |
| 3098 |
if (err < 0) { |
| 3099 |
bphy_err(drvr, "BRCMF_C_GET_RATE error (%d)\n", err); |
| 3100 |
return err; |
| 3101 |
} |
| 3102 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); |
| 3103 |
sinfo->txrate.legacy = rate * 5; |
| 3104 |
|
| 3105 |
memset(&scbval, 0, sizeof(scbval)); |
| 3106 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, &scbval, |
| 3107 |
sizeof(scbval)); |
| 3108 |
if (err) { |
| 3109 |
bphy_err(drvr, "BRCMF_C_GET_RSSI error (%d)\n", err); |
| 3110 |
return err; |
| 3111 |
} |
| 3112 |
rssi = le32_to_cpu(scbval.val); |
| 3113 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); |
| 3114 |
sinfo->signal = rssi; |
| 3115 |
|
| 3116 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_GET_PKTCNTS, &pktcnt, |
| 3117 |
sizeof(pktcnt)); |
| 3118 |
if (err) { |
| 3119 |
bphy_err(drvr, "BRCMF_C_GET_GET_PKTCNTS error (%d)\n", err); |
| 3120 |
return err; |
| 3121 |
} |
| 3122 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS) | |
| 3123 |
BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC) | |
| 3124 |
BIT_ULL(NL80211_STA_INFO_TX_PACKETS) | |
| 3125 |
BIT_ULL(NL80211_STA_INFO_TX_FAILED); |
| 3126 |
sinfo->rx_packets = le32_to_cpu(pktcnt.rx_good_pkt); |
| 3127 |
sinfo->rx_dropped_misc = le32_to_cpu(pktcnt.rx_bad_pkt); |
| 3128 |
sinfo->tx_packets = le32_to_cpu(pktcnt.tx_good_pkt); |
| 3129 |
sinfo->tx_failed = le32_to_cpu(pktcnt.tx_bad_pkt); |
| 3130 |
|
| 3131 |
return 0; |
| 3132 |
} |
| 3133 |
|
| 3134 |
static s32 |
| 3135 |
brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, |
| 3136 |
const u8 *mac, struct station_info *sinfo) |
| 3137 |
{ |
| 3138 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 3139 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 3140 |
struct brcmf_pub *drvr = cfg->pub; |
| 3141 |
struct brcmf_scb_val_le scb_val; |
| 3142 |
s32 err = 0; |
| 3143 |
struct brcmf_sta_info_le sta_info_le; |
| 3144 |
u32 sta_flags; |
| 3145 |
u32 is_tdls_peer; |
| 3146 |
s32 total_rssi_avg = 0; |
| 3147 |
s32 total_rssi = 0; |
| 3148 |
s32 count_rssi = 0; |
| 3149 |
int rssi; |
| 3150 |
u32 i; |
| 3151 |
|
| 3152 |
brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac); |
| 3153 |
if (!check_vif_up(ifp->vif)) |
| 3154 |
return -EIO; |
| 3155 |
|
| 3156 |
if (brcmf_is_ibssmode(ifp->vif)) |
| 3157 |
return brcmf_cfg80211_get_station_ibss(ifp, sinfo); |
| 3158 |
|
| 3159 |
memset(&sta_info_le, 0, sizeof(sta_info_le)); |
| 3160 |
memcpy(&sta_info_le, mac, ETH_ALEN); |
| 3161 |
err = brcmf_fil_iovar_data_get(ifp, "tdls_sta_info", |
| 3162 |
&sta_info_le, |
| 3163 |
sizeof(sta_info_le)); |
| 3164 |
is_tdls_peer = !err; |
| 3165 |
if (err) { |
| 3166 |
err = brcmf_fil_iovar_data_get(ifp, "sta_info", |
| 3167 |
&sta_info_le, |
| 3168 |
sizeof(sta_info_le)); |
| 3169 |
if (err < 0) { |
| 3170 |
bphy_err(drvr, "GET STA INFO failed, %d\n", err); |
| 3171 |
goto done; |
| 3172 |
} |
| 3173 |
} |
| 3174 |
brcmf_dbg(TRACE, "version %d\n", le16_to_cpu(sta_info_le.ver)); |
| 3175 |
sinfo->filled = BIT_ULL(NL80211_STA_INFO_INACTIVE_TIME); |
| 3176 |
sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000; |
| 3177 |
sta_flags = le32_to_cpu(sta_info_le.flags); |
| 3178 |
brcmf_convert_sta_flags(sta_flags, sinfo); |
| 3179 |
sinfo->sta_flags.mask |= BIT(NL80211_STA_FLAG_TDLS_PEER); |
| 3180 |
if (is_tdls_peer) |
| 3181 |
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); |
| 3182 |
else |
| 3183 |
sinfo->sta_flags.set &= ~BIT(NL80211_STA_FLAG_TDLS_PEER); |
| 3184 |
if (sta_flags & BRCMF_STA_ASSOC) { |
| 3185 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CONNECTED_TIME); |
| 3186 |
sinfo->connected_time = le32_to_cpu(sta_info_le.in); |
| 3187 |
brcmf_fill_bss_param(ifp, sinfo); |
| 3188 |
} |
| 3189 |
if (sta_flags & BRCMF_STA_SCBSTATS) { |
| 3190 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_FAILED); |
| 3191 |
sinfo->tx_failed = le32_to_cpu(sta_info_le.tx_failures); |
| 3192 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_PACKETS); |
| 3193 |
sinfo->tx_packets = le32_to_cpu(sta_info_le.tx_pkts); |
| 3194 |
sinfo->tx_packets += le32_to_cpu(sta_info_le.tx_mcast_pkts); |
| 3195 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS); |
| 3196 |
sinfo->rx_packets = le32_to_cpu(sta_info_le.rx_ucast_pkts); |
| 3197 |
sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts); |
| 3198 |
if (sinfo->tx_packets) { |
| 3199 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); |
| 3200 |
sinfo->txrate.legacy = |
| 3201 |
le32_to_cpu(sta_info_le.tx_rate) / 100; |
| 3202 |
} |
| 3203 |
if (sinfo->rx_packets) { |
| 3204 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_BITRATE); |
| 3205 |
sinfo->rxrate.legacy = |
| 3206 |
le32_to_cpu(sta_info_le.rx_rate) / 100; |
| 3207 |
} |
| 3208 |
if (le16_to_cpu(sta_info_le.ver) >= 4) { |
| 3209 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BYTES); |
| 3210 |
sinfo->tx_bytes = le64_to_cpu(sta_info_le.tx_tot_bytes); |
| 3211 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_BYTES); |
| 3212 |
sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes); |
| 3213 |
} |
| 3214 |
for (i = 0; i < BRCMF_ANT_MAX; i++) { |
| 3215 |
if (sta_info_le.rssi[i] == 0 || |
| 3216 |
sta_info_le.rx_lastpkt_rssi[i] == 0) |
| 3217 |
continue; |
| 3218 |
sinfo->chains |= BIT(count_rssi); |
| 3219 |
sinfo->chain_signal[count_rssi] = |
| 3220 |
sta_info_le.rx_lastpkt_rssi[i]; |
| 3221 |
sinfo->chain_signal_avg[count_rssi] = |
| 3222 |
sta_info_le.rssi[i]; |
| 3223 |
total_rssi += sta_info_le.rx_lastpkt_rssi[i]; |
| 3224 |
total_rssi_avg += sta_info_le.rssi[i]; |
| 3225 |
count_rssi++; |
| 3226 |
} |
| 3227 |
if (count_rssi) { |
| 3228 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); |
| 3229 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL_AVG); |
| 3230 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL); |
| 3231 |
sinfo->filled |= |
| 3232 |
BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL_AVG); |
| 3233 |
sinfo->signal = total_rssi / count_rssi; |
| 3234 |
sinfo->signal_avg = total_rssi_avg / count_rssi; |
| 3235 |
} else if (test_bit(BRCMF_VIF_STATUS_CONNECTED, |
| 3236 |
&ifp->vif->sme_state)) { |
| 3237 |
memset(&scb_val, 0, sizeof(scb_val)); |
| 3238 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, |
| 3239 |
&scb_val, sizeof(scb_val)); |
| 3240 |
if (err) { |
| 3241 |
bphy_err(drvr, "Could not get rssi (%d)\n", |
| 3242 |
err); |
| 3243 |
goto done; |
| 3244 |
} else { |
| 3245 |
rssi = le32_to_cpu(scb_val.val); |
| 3246 |
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); |
| 3247 |
sinfo->signal = rssi; |
| 3248 |
brcmf_dbg(CONN, "RSSI %d dBm\n", rssi); |
| 3249 |
} |
| 3250 |
} |
| 3251 |
} |
| 3252 |
done: |
| 3253 |
brcmf_dbg(TRACE, "Exit\n"); |
| 3254 |
return err; |
| 3255 |
} |
| 3256 |
|
| 3257 |
static int |
| 3258 |
brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev, |
| 3259 |
int idx, u8 *mac, struct station_info *sinfo) |
| 3260 |
{ |
| 3261 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 3262 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 3263 |
struct brcmf_pub *drvr = cfg->pub; |
| 3264 |
s32 err; |
| 3265 |
|
| 3266 |
brcmf_dbg(TRACE, "Enter, idx %d\n", idx); |
| 3267 |
|
| 3268 |
if (idx == 0) { |
| 3269 |
cfg->assoclist.count = cpu_to_le32(BRCMF_MAX_ASSOCLIST); |
| 3270 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_ASSOCLIST, |
| 3271 |
&cfg->assoclist, |
| 3272 |
sizeof(cfg->assoclist)); |
| 3273 |
if (err) { |
| 3274 |
/* GET_ASSOCLIST unsupported by firmware of older chips */ |
| 3275 |
if (err == -EBADE) |
| 3276 |
bphy_info_once(drvr, "BRCMF_C_GET_ASSOCLIST unsupported\n"); |
| 3277 |
else |
| 3278 |
bphy_err(drvr, "BRCMF_C_GET_ASSOCLIST failed, err=%d\n", |
| 3279 |
err); |
| 3280 |
|
| 3281 |
cfg->assoclist.count = 0; |
| 3282 |
return -EOPNOTSUPP; |
| 3283 |
} |
| 3284 |
} |
| 3285 |
if (idx < le32_to_cpu(cfg->assoclist.count)) { |
| 3286 |
memcpy(mac, cfg->assoclist.mac[idx], ETH_ALEN); |
| 3287 |
return brcmf_cfg80211_get_station(wiphy, ndev, mac, sinfo); |
| 3288 |
} |
| 3289 |
return -ENOENT; |
| 3290 |
} |
| 3291 |
|
| 3292 |
static s32 |
| 3293 |
brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, |
| 3294 |
bool enabled, s32 timeout) |
| 3295 |
{ |
| 3296 |
s32 pm; |
| 3297 |
s32 err = 0; |
| 3298 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 3299 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 3300 |
struct brcmf_pub *drvr = cfg->pub; |
| 3301 |
|
| 3302 |
brcmf_dbg(TRACE, "Enter\n"); |
| 3303 |
|
| 3304 |
/* |
| 3305 |
* Powersave enable/disable request is coming from the |
| 3306 |
* cfg80211 even before the interface is up. In that |
| 3307 |
* scenario, driver will be storing the power save |
| 3308 |
* preference in cfg struct to apply this to |
| 3309 |
* FW later while initializing the dongle |
| 3310 |
*/ |
| 3311 |
cfg->pwr_save = enabled; |
| 3312 |
if (!check_vif_up(ifp->vif)) { |
| 3313 |
|
| 3314 |
brcmf_dbg(INFO, "Device is not ready, storing the value in cfg_info struct\n"); |
| 3315 |
goto done; |
| 3316 |
} |
| 3317 |
|
| 3318 |
pm = enabled ? PM_FAST : PM_OFF; |
| 3319 |
/* Do not enable the power save after assoc if it is a p2p interface */ |
| 3320 |
if (ifp->vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) { |
| 3321 |
brcmf_dbg(INFO, "Do not enable power save for P2P clients\n"); |
| 3322 |
pm = PM_OFF; |
| 3323 |
} |
| 3324 |
brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled")); |
| 3325 |
|
| 3326 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm); |
| 3327 |
if (err) { |
| 3328 |
if (err == -ENODEV) |
| 3329 |
bphy_err(drvr, "net_device is not ready yet\n"); |
| 3330 |
else |
| 3331 |
bphy_err(drvr, "error (%d)\n", err); |
| 3332 |
} |
| 3333 |
|
| 3334 |
err = brcmf_fil_iovar_int_set(ifp, "pm2_sleep_ret", |
| 3335 |
min_t(u32, timeout, BRCMF_PS_MAX_TIMEOUT_MS)); |
| 3336 |
if (err) |
| 3337 |
bphy_err(drvr, "Unable to set pm timeout, (%d)\n", err); |
| 3338 |
|
| 3339 |
done: |
| 3340 |
brcmf_dbg(TRACE, "Exit\n"); |
| 3341 |
return err; |
| 3342 |
} |
| 3343 |
|
| 3344 |
static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg, |
| 3345 |
struct brcmf_bss_info_le *bi) |
| 3346 |
{ |
| 3347 |
struct wiphy *wiphy = cfg_to_wiphy(cfg); |
| 3348 |
struct brcmf_pub *drvr = cfg->pub; |
| 3349 |
struct cfg80211_bss *bss; |
| 3350 |
enum nl80211_band band; |
| 3351 |
struct brcmu_chan ch; |
| 3352 |
u16 channel; |
| 3353 |
u32 freq; |
| 3354 |
u16 notify_capability; |
| 3355 |
u16 notify_interval; |
| 3356 |
u8 *notify_ie; |
| 3357 |
size_t notify_ielen; |
| 3358 |
struct cfg80211_inform_bss bss_data = {}; |
| 3359 |
|
| 3360 |
if (le32_to_cpu(bi->length) > WL_BSS_INFO_MAX) { |
| 3361 |
bphy_err(drvr, "Bss info is larger than buffer. Discarding\n"); |
| 3362 |
return -EINVAL; |
| 3363 |
} |
| 3364 |
|
| 3365 |
if (!bi->ctl_ch) { |
| 3366 |
ch.chspec = le16_to_cpu(bi->chanspec); |
| 3367 |
cfg->d11inf.decchspec(&ch); |
| 3368 |
bi->ctl_ch = ch.control_ch_num; |
| 3369 |
} |
| 3370 |
channel = bi->ctl_ch; |
| 3371 |
|
| 3372 |
if (channel <= CH_MAX_2G_CHANNEL) |
| 3373 |
band = NL80211_BAND_2GHZ; |
| 3374 |
else |
| 3375 |
band = NL80211_BAND_5GHZ; |
| 3376 |
|
| 3377 |
freq = ieee80211_channel_to_frequency(channel, band); |
| 3378 |
bss_data.chan = ieee80211_get_channel(wiphy, freq); |
| 3379 |
bss_data.boottime_ns = ktime_to_ns(ktime_get_boottime()); |
| 3380 |
|
| 3381 |
notify_capability = le16_to_cpu(bi->capability); |
| 3382 |
notify_interval = le16_to_cpu(bi->beacon_period); |
| 3383 |
notify_ie = (u8 *)bi + le16_to_cpu(bi->ie_offset); |
| 3384 |
notify_ielen = le32_to_cpu(bi->ie_length); |
| 3385 |
bss_data.signal = (s16)le16_to_cpu(bi->RSSI) * 100; |
| 3386 |
|
| 3387 |
brcmf_dbg(CONN, "bssid: %pM\n", bi->BSSID); |
| 3388 |
brcmf_dbg(CONN, "Channel: %d(%d)\n", channel, freq); |
| 3389 |
brcmf_dbg(CONN, "Capability: %X\n", notify_capability); |
| 3390 |
brcmf_dbg(CONN, "Beacon interval: %d\n", notify_interval); |
| 3391 |
brcmf_dbg(CONN, "Signal: %d\n", bss_data.signal); |
| 3392 |
|
| 3393 |
bss = cfg80211_inform_bss_data(wiphy, &bss_data, |
| 3394 |
CFG80211_BSS_FTYPE_UNKNOWN, |
| 3395 |
(const u8 *)bi->BSSID, |
| 3396 |
0, notify_capability, |
| 3397 |
notify_interval, notify_ie, |
| 3398 |
notify_ielen, GFP_KERNEL); |
| 3399 |
|
| 3400 |
if (!bss) |
| 3401 |
return -ENOMEM; |
| 3402 |
|
| 3403 |
cfg80211_put_bss(wiphy, bss); |
| 3404 |
|
| 3405 |
return 0; |
| 3406 |
} |
| 3407 |
|
| 3408 |
static struct brcmf_bss_info_le * |
| 3409 |
next_bss_le(struct brcmf_scan_results *list, struct brcmf_bss_info_le *bss) |
| 3410 |
{ |
| 3411 |
if (bss == NULL) |
| 3412 |
return list->bss_info_le; |
| 3413 |
return (struct brcmf_bss_info_le *)((unsigned long)bss + |
| 3414 |
le32_to_cpu(bss->length)); |
| 3415 |
} |
| 3416 |
|
| 3417 |
static s32 brcmf_inform_bss(struct brcmf_cfg80211_info *cfg) |
| 3418 |
{ |
| 3419 |
struct brcmf_pub *drvr = cfg->pub; |
| 3420 |
struct brcmf_scan_results *bss_list; |
| 3421 |
struct brcmf_bss_info_le *bi = NULL; /* must be initialized */ |
| 3422 |
s32 err = 0; |
| 3423 |
int i; |
| 3424 |
|
| 3425 |
bss_list = (struct brcmf_scan_results *)cfg->escan_info.escan_buf; |
| 3426 |
if (bss_list->count != 0 && |
| 3427 |
bss_list->version != BRCMF_BSS_INFO_VERSION) { |
| 3428 |
bphy_err(drvr, "Version %d != WL_BSS_INFO_VERSION\n", |
| 3429 |
bss_list->version); |
| 3430 |
return -EOPNOTSUPP; |
| 3431 |
} |
| 3432 |
brcmf_dbg(SCAN, "scanned AP count (%d)\n", bss_list->count); |
| 3433 |
for (i = 0; i < bss_list->count; i++) { |
| 3434 |
bi = next_bss_le(bss_list, bi); |
| 3435 |
err = brcmf_inform_single_bss(cfg, bi); |
| 3436 |
if (err) |
| 3437 |
break; |
| 3438 |
} |
| 3439 |
return err; |
| 3440 |
} |
| 3441 |
|
| 3442 |
static s32 brcmf_inform_ibss(struct brcmf_cfg80211_info *cfg, |
| 3443 |
struct net_device *ndev, const u8 *bssid) |
| 3444 |
{ |
| 3445 |
struct wiphy *wiphy = cfg_to_wiphy(cfg); |
| 3446 |
struct brcmf_pub *drvr = cfg->pub; |
| 3447 |
struct ieee80211_channel *notify_channel; |
| 3448 |
struct brcmf_bss_info_le *bi = NULL; |
| 3449 |
struct ieee80211_supported_band *band; |
| 3450 |
struct cfg80211_bss *bss; |
| 3451 |
struct brcmu_chan ch; |
| 3452 |
u8 *buf = NULL; |
| 3453 |
s32 err = 0; |
| 3454 |
u32 freq; |
| 3455 |
u16 notify_capability; |
| 3456 |
u16 notify_interval; |
| 3457 |
u8 *notify_ie; |
| 3458 |
size_t notify_ielen; |
| 3459 |
s32 notify_signal; |
| 3460 |
|
| 3461 |
brcmf_dbg(TRACE, "Enter\n"); |
| 3462 |
|
| 3463 |
buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); |
| 3464 |
if (buf == NULL) { |
| 3465 |
err = -ENOMEM; |
| 3466 |
goto CleanUp; |
| 3467 |
} |
| 3468 |
|
| 3469 |
*(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); |
| 3470 |
|
| 3471 |
err = brcmf_fil_cmd_data_get(netdev_priv(ndev), BRCMF_C_GET_BSS_INFO, |
| 3472 |
buf, WL_BSS_INFO_MAX); |
| 3473 |
if (err) { |
| 3474 |
bphy_err(drvr, "WLC_GET_BSS_INFO failed: %d\n", err); |
| 3475 |
goto CleanUp; |
| 3476 |
} |
| 3477 |
|
| 3478 |
bi = (struct brcmf_bss_info_le *)(buf + 4); |
| 3479 |
|
| 3480 |
ch.chspec = le16_to_cpu(bi->chanspec); |
| 3481 |
cfg->d11inf.decchspec(&ch); |
| 3482 |
|
| 3483 |
if (ch.band == BRCMU_CHAN_BAND_2G) |
| 3484 |
band = wiphy->bands[NL80211_BAND_2GHZ]; |
| 3485 |
else |
| 3486 |
band = wiphy->bands[NL80211_BAND_5GHZ]; |
| 3487 |
|
| 3488 |
freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band); |
| 3489 |
cfg->channel = freq; |
| 3490 |
notify_channel = ieee80211_get_channel(wiphy, freq); |
| 3491 |
|
| 3492 |
notify_capability = le16_to_cpu(bi->capability); |
| 3493 |
notify_interval = le16_to_cpu(bi->beacon_period); |
| 3494 |
notify_ie = (u8 *)bi + le16_to_cpu(bi->ie_offset); |
| 3495 |
notify_ielen = le32_to_cpu(bi->ie_length); |
| 3496 |
notify_signal = (s16)le16_to_cpu(bi->RSSI) * 100; |
| 3497 |
|
| 3498 |
brcmf_dbg(CONN, "channel: %d(%d)\n", ch.control_ch_num, freq); |
| 3499 |
brcmf_dbg(CONN, "capability: %X\n", notify_capability); |
| 3500 |
brcmf_dbg(CONN, "beacon interval: %d\n", notify_interval); |
| 3501 |
brcmf_dbg(CONN, "signal: %d\n", notify_signal); |
| 3502 |
|
| 3503 |
bss = cfg80211_inform_bss(wiphy, notify_channel, |
| 3504 |
CFG80211_BSS_FTYPE_UNKNOWN, bssid, 0, |
| 3505 |
notify_capability, notify_interval, |
| 3506 |
notify_ie, notify_ielen, notify_signal, |
| 3507 |
GFP_KERNEL); |
| 3508 |
|
| 3509 |
if (!bss) { |
| 3510 |
err = -ENOMEM; |
| 3511 |
goto CleanUp; |
| 3512 |
} |
| 3513 |
|
| 3514 |
cfg80211_put_bss(wiphy, bss); |
| 3515 |
|
| 3516 |
CleanUp: |
| 3517 |
|
| 3518 |
kfree(buf); |
| 3519 |
|
| 3520 |
brcmf_dbg(TRACE, "Exit\n"); |
| 3521 |
|
| 3522 |
return err; |
| 3523 |
} |
| 3524 |
|
| 3525 |
static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg, |
| 3526 |
struct brcmf_if *ifp) |
| 3527 |
{ |
| 3528 |
struct brcmf_pub *drvr = cfg->pub; |
| 3529 |
struct brcmf_bss_info_le *bi = NULL; |
| 3530 |
s32 err = 0; |
| 3531 |
|
| 3532 |
brcmf_dbg(TRACE, "Enter\n"); |
| 3533 |
if (brcmf_is_ibssmode(ifp->vif)) |
| 3534 |
return err; |
| 3535 |
|
| 3536 |
*(__le32 *)cfg->extra_buf = cpu_to_le32(WL_EXTRA_BUF_MAX); |
| 3537 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, |
| 3538 |
cfg->extra_buf, WL_EXTRA_BUF_MAX); |
| 3539 |
if (err) { |
| 3540 |
bphy_err(drvr, "Could not get bss info %d\n", err); |
| 3541 |
goto update_bss_info_out; |
| 3542 |
} |
| 3543 |
bi = (struct brcmf_bss_info_le *)(cfg->extra_buf + 4); |
| 3544 |
err = brcmf_inform_single_bss(cfg, bi); |
| 3545 |
|
| 3546 |
update_bss_info_out: |
| 3547 |
brcmf_dbg(TRACE, "Exit"); |
| 3548 |
return err; |
| 3549 |
} |
| 3550 |
|
| 3551 |
void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg) |
| 3552 |
{ |
| 3553 |
struct escan_info *escan = &cfg->escan_info; |
| 3554 |
|
| 3555 |
set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status); |
| 3556 |
if (cfg->int_escan_map || cfg->scan_request) { |
| 3557 |
escan->escan_state = WL_ESCAN_STATE_IDLE; |
| 3558 |
brcmf_notify_escan_complete(cfg, escan->ifp, true, true); |
| 3559 |
} |
| 3560 |
clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); |
| 3561 |
clear_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status); |
| 3562 |
} |
| 3563 |
|
| 3564 |
static void brcmf_cfg80211_escan_timeout_worker(struct work_struct *work) |
| 3565 |
{ |
| 3566 |
struct brcmf_cfg80211_info *cfg = |
| 3567 |
container_of(work, struct brcmf_cfg80211_info, |
| 3568 |
escan_timeout_work); |
| 3569 |
|
| 3570 |
brcmf_inform_bss(cfg); |
| 3571 |
brcmf_notify_escan_complete(cfg, cfg->escan_info.ifp, true, true); |
| 3572 |
} |
| 3573 |
|
| 3574 |
static void brcmf_escan_timeout(struct timer_list *t) |
| 3575 |
{ |
| 3576 |
struct brcmf_cfg80211_info *cfg = |
| 3577 |
timer_container_of(cfg, t, escan_timeout); |
| 3578 |
struct brcmf_pub *drvr = cfg->pub; |
| 3579 |
|
| 3580 |
if (cfg->int_escan_map || cfg->scan_request) { |
| 3581 |
bphy_err(drvr, "timer expired\n"); |
| 3582 |
schedule_work(&cfg->escan_timeout_work); |
| 3583 |
} |
| 3584 |
} |
| 3585 |
|
| 3586 |
static s32 |
| 3587 |
brcmf_compare_update_same_bss(struct brcmf_cfg80211_info *cfg, |
| 3588 |
struct brcmf_bss_info_le *bss, |
| 3589 |
struct brcmf_bss_info_le *bss_info_le) |
| 3590 |
{ |
| 3591 |
struct brcmu_chan ch_bss, ch_bss_info_le; |
| 3592 |
|
| 3593 |
ch_bss.chspec = le16_to_cpu(bss->chanspec); |
| 3594 |
cfg->d11inf.decchspec(&ch_bss); |
| 3595 |
ch_bss_info_le.chspec = le16_to_cpu(bss_info_le->chanspec); |
| 3596 |
cfg->d11inf.decchspec(&ch_bss_info_le); |
| 3597 |
|
| 3598 |
if (!memcmp(&bss_info_le->BSSID, &bss->BSSID, ETH_ALEN) && |
| 3599 |
ch_bss.band == ch_bss_info_le.band && |
| 3600 |
bss_info_le->SSID_len == bss->SSID_len && |
| 3601 |
!memcmp(bss_info_le->SSID, bss->SSID, bss_info_le->SSID_len)) { |
| 3602 |
if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) == |
| 3603 |
(bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL)) { |
| 3604 |
s16 bss_rssi = le16_to_cpu(bss->RSSI); |
| 3605 |
s16 bss_info_rssi = le16_to_cpu(bss_info_le->RSSI); |
| 3606 |
|
| 3607 |
/* preserve max RSSI if the measurements are |
| 3608 |
* both on-channel or both off-channel |
| 3609 |
*/ |
| 3610 |
if (bss_info_rssi > bss_rssi) |
| 3611 |
bss->RSSI = bss_info_le->RSSI; |
| 3612 |
} else if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) && |
| 3613 |
(bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL) == 0) { |
| 3614 |
/* preserve the on-channel rssi measurement |
| 3615 |
* if the new measurement is off channel |
| 3616 |
*/ |
| 3617 |
bss->RSSI = bss_info_le->RSSI; |
| 3618 |
bss->flags |= BRCMF_BSS_RSSI_ON_CHANNEL; |
| 3619 |
} |
| 3620 |
return 1; |
| 3621 |
} |
| 3622 |
return 0; |
| 3623 |
} |
| 3624 |
|
| 3625 |
static s32 |
| 3626 |
brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, |
| 3627 |
const struct brcmf_event_msg *e, void *data) |
| 3628 |
{ |
| 3629 |
struct brcmf_pub *drvr = ifp->drvr; |
| 3630 |
struct brcmf_cfg80211_info *cfg = drvr->config; |
| 3631 |
s32 status; |
| 3632 |
struct brcmf_escan_result_le *escan_result_le; |
| 3633 |
u32 escan_buflen; |
| 3634 |
struct brcmf_bss_info_le *bss_info_le; |
| 3635 |
struct brcmf_bss_info_le *bss = NULL; |
| 3636 |
u32 bi_length; |
| 3637 |
struct brcmf_scan_results *list; |
| 3638 |
u32 i; |
| 3639 |
bool aborted; |
| 3640 |
|
| 3641 |
status = e->status; |
| 3642 |
|
| 3643 |
if (status == BRCMF_E_STATUS_ABORT) |
| 3644 |
goto exit; |
| 3645 |
|
| 3646 |
if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { |
| 3647 |
bphy_err(drvr, "scan not ready, bsscfgidx=%d\n", |
| 3648 |
ifp->bsscfgidx); |
| 3649 |
return -EPERM; |
| 3650 |
} |
| 3651 |
|
| 3652 |
if (status == BRCMF_E_STATUS_PARTIAL) { |
| 3653 |
brcmf_dbg(SCAN, "ESCAN Partial result\n"); |
| 3654 |
if (e->datalen < sizeof(*escan_result_le)) { |
| 3655 |
bphy_err(drvr, "invalid event data length\n"); |
| 3656 |
goto exit; |
| 3657 |
} |
| 3658 |
escan_result_le = (struct brcmf_escan_result_le *) data; |
| 3659 |
if (!escan_result_le) { |
| 3660 |
bphy_err(drvr, "Invalid escan result (NULL pointer)\n"); |
| 3661 |
goto exit; |
| 3662 |
} |
| 3663 |
escan_buflen = le32_to_cpu(escan_result_le->buflen); |
| 3664 |
if (escan_buflen > BRCMF_ESCAN_BUF_SIZE || |
| 3665 |
escan_buflen > e->datalen || |
| 3666 |
escan_buflen < sizeof(*escan_result_le)) { |
| 3667 |
bphy_err(drvr, "Invalid escan buffer length: %d\n", |
| 3668 |
escan_buflen); |
| 3669 |
goto exit; |
| 3670 |
} |
| 3671 |
if (le16_to_cpu(escan_result_le->bss_count) != 1) { |
| 3672 |
bphy_err(drvr, "Invalid bss_count %d: ignoring\n", |
| 3673 |
escan_result_le->bss_count); |
| 3674 |
goto exit; |
| 3675 |
} |
| 3676 |
bss_info_le = &escan_result_le->bss_info_le; |
| 3677 |
|
| 3678 |
if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le)) |
| 3679 |
goto exit; |
| 3680 |
|
| 3681 |
if (!cfg->int_escan_map && !cfg->scan_request) { |
| 3682 |
brcmf_dbg(SCAN, "result without cfg80211 request\n"); |
| 3683 |
goto exit; |
| 3684 |
} |
| 3685 |
|
| 3686 |
bi_length = le32_to_cpu(bss_info_le->length); |
| 3687 |
if (bi_length != escan_buflen - WL_ESCAN_RESULTS_FIXED_SIZE) { |
| 3688 |
bphy_err(drvr, "Ignoring invalid bss_info length: %d\n", |
| 3689 |
bi_length); |
| 3690 |
goto exit; |
| 3691 |
} |
| 3692 |
|
| 3693 |
if (!(cfg_to_wiphy(cfg)->interface_modes & |
| 3694 |
BIT(NL80211_IFTYPE_ADHOC))) { |
| 3695 |
if (le16_to_cpu(bss_info_le->capability) & |
| 3696 |
WLAN_CAPABILITY_IBSS) { |
| 3697 |
bphy_err(drvr, "Ignoring IBSS result\n"); |
| 3698 |
goto exit; |
| 3699 |
} |
| 3700 |
} |
| 3701 |
|
| 3702 |
list = (struct brcmf_scan_results *) |
| 3703 |
cfg->escan_info.escan_buf; |
| 3704 |
if (bi_length > BRCMF_ESCAN_BUF_SIZE - list->buflen) { |
| 3705 |
bphy_err(drvr, "Buffer is too small: ignoring\n"); |
| 3706 |
goto exit; |
| 3707 |
} |
| 3708 |
|
| 3709 |
for (i = 0; i < list->count; i++) { |
| 3710 |
bss = bss ? (struct brcmf_bss_info_le *) |
| 3711 |
((unsigned char *)bss + |
| 3712 |
le32_to_cpu(bss->length)) : list->bss_info_le; |
| 3713 |
if (brcmf_compare_update_same_bss(cfg, bss, |
| 3714 |
bss_info_le)) |
| 3715 |
goto exit; |
| 3716 |
} |
| 3717 |
memcpy(&cfg->escan_info.escan_buf[list->buflen], bss_info_le, |
| 3718 |
bi_length); |
| 3719 |
list->version = le32_to_cpu(bss_info_le->version); |
| 3720 |
list->buflen += bi_length; |
| 3721 |
list->count++; |
| 3722 |
} else { |
| 3723 |
cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE; |
| 3724 |
if (brcmf_p2p_scan_finding_common_channel(cfg, NULL)) |
| 3725 |
goto exit; |
| 3726 |
if (cfg->int_escan_map || cfg->scan_request) { |
| 3727 |
brcmf_inform_bss(cfg); |
| 3728 |
aborted = status != BRCMF_E_STATUS_SUCCESS; |
| 3729 |
brcmf_notify_escan_complete(cfg, ifp, aborted, false); |
| 3730 |
} else |
| 3731 |
brcmf_dbg(SCAN, "Ignored scan complete result 0x%x\n", |
| 3732 |
status); |
| 3733 |
} |
| 3734 |
exit: |
| 3735 |
return 0; |
| 3736 |
} |
| 3737 |
|
| 3738 |
static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg) |
| 3739 |
{ |
| 3740 |
brcmf_fweh_register(cfg->pub, BRCMF_E_ESCAN_RESULT, |
| 3741 |
brcmf_cfg80211_escan_handler); |
| 3742 |
cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE; |
| 3743 |
/* Init scan_timeout timer */ |
| 3744 |
timer_setup(&cfg->escan_timeout, brcmf_escan_timeout, 0); |
| 3745 |
INIT_WORK(&cfg->escan_timeout_work, |
| 3746 |
brcmf_cfg80211_escan_timeout_worker); |
| 3747 |
} |
| 3748 |
|
| 3749 |
static struct cfg80211_scan_request * |
| 3750 |
brcmf_alloc_internal_escan_request(struct wiphy *wiphy, u32 n_netinfo) { |
| 3751 |
struct cfg80211_scan_request *req; |
| 3752 |
size_t req_size; |
| 3753 |
|
| 3754 |
req_size = sizeof(*req) + |
| 3755 |
n_netinfo * sizeof(req->channels[0]) + |
| 3756 |
n_netinfo * sizeof(*req->ssids); |
| 3757 |
|
| 3758 |
req = kzalloc(req_size, GFP_KERNEL); |
| 3759 |
if (req) { |
| 3760 |
req->wiphy = wiphy; |
| 3761 |
req->ssids = (void *)(&req->channels[0]) + |
| 3762 |
n_netinfo * sizeof(req->channels[0]); |
| 3763 |
} |
| 3764 |
return req; |
| 3765 |
} |
| 3766 |
|
| 3767 |
static int brcmf_internal_escan_add_info(struct cfg80211_scan_request *req, |
| 3768 |
u8 *ssid, u8 ssid_len, u8 channel) |
| 3769 |
{ |
| 3770 |
struct ieee80211_channel *chan; |
| 3771 |
enum nl80211_band band; |
| 3772 |
int freq, i; |
| 3773 |
|
| 3774 |
if (channel <= CH_MAX_2G_CHANNEL) |
| 3775 |
band = NL80211_BAND_2GHZ; |
| 3776 |
else |
| 3777 |
band = NL80211_BAND_5GHZ; |
| 3778 |
|
| 3779 |
freq = ieee80211_channel_to_frequency(channel, band); |
| 3780 |
if (!freq) |
| 3781 |
return -EINVAL; |
| 3782 |
|
| 3783 |
chan = ieee80211_get_channel(req->wiphy, freq); |
| 3784 |
if (!chan) |
| 3785 |
return -EINVAL; |
| 3786 |
|
| 3787 |
for (i = 0; i < req->n_channels; i++) { |
| 3788 |
if (req->channels[i] == chan) |
| 3789 |
break; |
| 3790 |
} |
| 3791 |
if (i == req->n_channels) { |
| 3792 |
req->n_channels++; |
| 3793 |
req->channels[i] = chan; |
| 3794 |
} |
| 3795 |
|
| 3796 |
for (i = 0; i < req->n_ssids; i++) { |
| 3797 |
if (req->ssids[i].ssid_len == ssid_len && |
| 3798 |
!memcmp(req->ssids[i].ssid, ssid, ssid_len)) |
| 3799 |
break; |
| 3800 |
} |
| 3801 |
if (i == req->n_ssids) { |
| 3802 |
memcpy(req->ssids[req->n_ssids].ssid, ssid, ssid_len); |
| 3803 |
req->ssids[req->n_ssids++].ssid_len = ssid_len; |
| 3804 |
} |
| 3805 |
return 0; |
| 3806 |
} |
| 3807 |
|
| 3808 |
static int brcmf_start_internal_escan(struct brcmf_if *ifp, u32 fwmap, |
| 3809 |
struct cfg80211_scan_request *request) |
| 3810 |
{ |
| 3811 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 3812 |
int err; |
| 3813 |
|
| 3814 |
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { |
| 3815 |
if (cfg->int_escan_map) |
| 3816 |
brcmf_dbg(SCAN, "aborting internal scan: map=%u\n", |
| 3817 |
cfg->int_escan_map); |
| 3818 |
/* Abort any on-going scan */ |
| 3819 |
brcmf_abort_scanning(cfg); |
| 3820 |
} |
| 3821 |
|
| 3822 |
brcmf_dbg(SCAN, "start internal scan: map=%u\n", fwmap); |
| 3823 |
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); |
| 3824 |
cfg->escan_info.run = brcmf_run_escan; |
| 3825 |
err = brcmf_do_escan(ifp, request); |
| 3826 |
if (err) { |
| 3827 |
clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); |
| 3828 |
return err; |
| 3829 |
} |
| 3830 |
cfg->int_escan_map = fwmap; |
| 3831 |
return 0; |
| 3832 |
} |
| 3833 |
|
| 3834 |
static struct brcmf_pno_net_info_le * |
| 3835 |
brcmf_get_netinfo_array(struct brcmf_pno_scanresults_le *pfn_v1) |
| 3836 |
{ |
| 3837 |
struct brcmf_pno_scanresults_v2_le *pfn_v2; |
| 3838 |
struct brcmf_pno_net_info_le *netinfo; |
| 3839 |
|
| 3840 |
switch (pfn_v1->version) { |
| 3841 |
default: |
| 3842 |
WARN_ON(1); |
| 3843 |
fallthrough; |
| 3844 |
case cpu_to_le32(1): |
| 3845 |
netinfo = (struct brcmf_pno_net_info_le *)(pfn_v1 + 1); |
| 3846 |
break; |
| 3847 |
case cpu_to_le32(2): |
| 3848 |
pfn_v2 = (struct brcmf_pno_scanresults_v2_le *)pfn_v1; |
| 3849 |
netinfo = (struct brcmf_pno_net_info_le *)(pfn_v2 + 1); |
| 3850 |
break; |
| 3851 |
} |
| 3852 |
|
| 3853 |
return netinfo; |
| 3854 |
} |
| 3855 |
|
| 3856 |
/* PFN result doesn't have all the info which are required by the supplicant |
| 3857 |
* (For e.g IEs) Do a target Escan so that sched scan results are reported |
| 3858 |
* via wl_inform_single_bss in the required format. Escan does require the |
| 3859 |
* scan request in the form of cfg80211_scan_request. For timebeing, create |
| 3860 |
* cfg80211_scan_request one out of the received PNO event. |
| 3861 |
*/ |
| 3862 |
static s32 |
| 3863 |
brcmf_notify_sched_scan_results(struct brcmf_if *ifp, |
| 3864 |
const struct brcmf_event_msg *e, void *data) |
| 3865 |
{ |
| 3866 |
struct brcmf_pub *drvr = ifp->drvr; |
| 3867 |
struct brcmf_cfg80211_info *cfg = drvr->config; |
| 3868 |
struct brcmf_pno_net_info_le *netinfo, *netinfo_start; |
| 3869 |
struct cfg80211_scan_request *request = NULL; |
| 3870 |
struct wiphy *wiphy = cfg_to_wiphy(cfg); |
| 3871 |
int i, err = 0; |
| 3872 |
struct brcmf_pno_scanresults_le *pfn_result; |
| 3873 |
u32 bucket_map; |
| 3874 |
u32 result_count; |
| 3875 |
u32 status; |
| 3876 |
u32 datalen; |
| 3877 |
|
| 3878 |
brcmf_dbg(SCAN, "Enter\n"); |
| 3879 |
|
| 3880 |
if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) { |
| 3881 |
brcmf_dbg(SCAN, "Event data too small. Ignore\n"); |
| 3882 |
return 0; |
| 3883 |
} |
| 3884 |
|
| 3885 |
if (e->event_code == BRCMF_E_PFN_NET_LOST) { |
| 3886 |
brcmf_dbg(SCAN, "PFN NET LOST event. Do Nothing\n"); |
| 3887 |
return 0; |
| 3888 |
} |
| 3889 |
|
| 3890 |
pfn_result = (struct brcmf_pno_scanresults_le *)data; |
| 3891 |
result_count = le32_to_cpu(pfn_result->count); |
| 3892 |
status = le32_to_cpu(pfn_result->status); |
| 3893 |
|
| 3894 |
/* PFN event is limited to fit 512 bytes so we may get |
| 3895 |
* multiple NET_FOUND events. For now place a warning here. |
| 3896 |
*/ |
| 3897 |
WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE); |
| 3898 |
brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count); |
| 3899 |
if (!result_count) { |
| 3900 |
bphy_err(drvr, "FALSE PNO Event. (pfn_count == 0)\n"); |
| 3901 |
goto out_err; |
| 3902 |
} |
| 3903 |
|
| 3904 |
netinfo_start = brcmf_get_netinfo_array(pfn_result); |
| 3905 |
datalen = e->datalen - ((void *)netinfo_start - (void *)pfn_result); |
| 3906 |
if (datalen < result_count * sizeof(*netinfo)) { |
| 3907 |
bphy_err(drvr, "insufficient event data\n"); |
| 3908 |
goto out_err; |
| 3909 |
} |
| 3910 |
|
| 3911 |
request = brcmf_alloc_internal_escan_request(wiphy, |
| 3912 |
result_count); |
| 3913 |
if (!request) { |
| 3914 |
err = -ENOMEM; |
| 3915 |
goto out_err; |
| 3916 |
} |
| 3917 |
|
| 3918 |
bucket_map = 0; |
| 3919 |
for (i = 0; i < result_count; i++) { |
| 3920 |
netinfo = &netinfo_start[i]; |
| 3921 |
|
| 3922 |
if (netinfo->SSID_len > IEEE80211_MAX_SSID_LEN) |
| 3923 |
netinfo->SSID_len = IEEE80211_MAX_SSID_LEN; |
| 3924 |
brcmf_dbg(SCAN, "SSID:%.32s Channel:%d\n", |
| 3925 |
netinfo->SSID, netinfo->channel); |
| 3926 |
bucket_map |= brcmf_pno_get_bucket_map(cfg->pno, netinfo); |
| 3927 |
err = brcmf_internal_escan_add_info(request, |
| 3928 |
netinfo->SSID, |
| 3929 |
netinfo->SSID_len, |
| 3930 |
netinfo->channel); |
| 3931 |
if (err) |
| 3932 |
goto out_err; |
| 3933 |
} |
| 3934 |
|
| 3935 |
if (!bucket_map) |
| 3936 |
goto free_req; |
| 3937 |
|
| 3938 |
err = brcmf_start_internal_escan(ifp, bucket_map, request); |
| 3939 |
if (!err) |
| 3940 |
goto free_req; |
| 3941 |
|
| 3942 |
out_err: |
| 3943 |
cfg80211_sched_scan_stopped(wiphy, 0); |
| 3944 |
free_req: |
| 3945 |
kfree(request); |
| 3946 |
return err; |
| 3947 |
} |
| 3948 |
|
| 3949 |
static int |
| 3950 |
brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy, |
| 3951 |
struct net_device *ndev, |
| 3952 |
struct cfg80211_sched_scan_request *req) |
| 3953 |
{ |
| 3954 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 3955 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 3956 |
struct brcmf_pub *drvr = cfg->pub; |
| 3957 |
|
| 3958 |
brcmf_dbg(SCAN, "Enter: n_match_sets=%d n_ssids=%d\n", |
| 3959 |
req->n_match_sets, req->n_ssids); |
| 3960 |
|
| 3961 |
if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) { |
| 3962 |
bphy_err(drvr, "Scanning suppressed: status=%lu\n", |
| 3963 |
cfg->scan_status); |
| 3964 |
return -EAGAIN; |
| 3965 |
} |
| 3966 |
|
| 3967 |
if (req->n_match_sets <= 0) { |
| 3968 |
brcmf_dbg(SCAN, "invalid number of matchsets specified: %d\n", |
| 3969 |
req->n_match_sets); |
| 3970 |
return -EINVAL; |
| 3971 |
} |
| 3972 |
|
| 3973 |
return brcmf_pno_start_sched_scan(ifp, req); |
| 3974 |
} |
| 3975 |
|
| 3976 |
static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy, |
| 3977 |
struct net_device *ndev, u64 reqid) |
| 3978 |
{ |
| 3979 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 3980 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 3981 |
|
| 3982 |
brcmf_dbg(SCAN, "enter\n"); |
| 3983 |
brcmf_pno_stop_sched_scan(ifp, reqid); |
| 3984 |
if (cfg->int_escan_map) |
| 3985 |
brcmf_notify_escan_complete(cfg, ifp, true, true); |
| 3986 |
return 0; |
| 3987 |
} |
| 3988 |
|
| 3989 |
static __always_inline void brcmf_delay(u32 ms) |
| 3990 |
{ |
| 3991 |
if (ms < 1000 / HZ) { |
| 3992 |
cond_resched(); |
| 3993 |
mdelay(ms); |
| 3994 |
} else { |
| 3995 |
msleep(ms); |
| 3996 |
} |
| 3997 |
} |
| 3998 |
|
| 3999 |
static s32 brcmf_config_wowl_pattern(struct brcmf_if *ifp, u8 cmd[4], |
| 4000 |
u8 *pattern, u32 patternsize, u8 *mask, |
| 4001 |
u32 packet_offset) |
| 4002 |
{ |
| 4003 |
struct brcmf_fil_wowl_pattern_le *filter; |
| 4004 |
u32 masksize; |
| 4005 |
u32 patternoffset; |
| 4006 |
u8 *buf; |
| 4007 |
u32 bufsize; |
| 4008 |
s32 ret; |
| 4009 |
|
| 4010 |
masksize = (patternsize + 7) / 8; |
| 4011 |
patternoffset = sizeof(*filter) - sizeof(filter->cmd) + masksize; |
| 4012 |
|
| 4013 |
bufsize = sizeof(*filter) + patternsize + masksize; |
| 4014 |
buf = kzalloc(bufsize, GFP_KERNEL); |
| 4015 |
if (!buf) |
| 4016 |
return -ENOMEM; |
| 4017 |
filter = (struct brcmf_fil_wowl_pattern_le *)buf; |
| 4018 |
|
| 4019 |
memcpy(filter->cmd, cmd, 4); |
| 4020 |
filter->masksize = cpu_to_le32(masksize); |
| 4021 |
filter->offset = cpu_to_le32(packet_offset); |
| 4022 |
filter->patternoffset = cpu_to_le32(patternoffset); |
| 4023 |
filter->patternsize = cpu_to_le32(patternsize); |
| 4024 |
filter->type = cpu_to_le32(BRCMF_WOWL_PATTERN_TYPE_BITMAP); |
| 4025 |
|
| 4026 |
if ((mask) && (masksize)) |
| 4027 |
memcpy(buf + sizeof(*filter), mask, masksize); |
| 4028 |
if ((pattern) && (patternsize)) |
| 4029 |
memcpy(buf + sizeof(*filter) + masksize, pattern, patternsize); |
| 4030 |
|
| 4031 |
ret = brcmf_fil_iovar_data_set(ifp, "wowl_pattern", buf, bufsize); |
| 4032 |
|
| 4033 |
kfree(buf); |
| 4034 |
return ret; |
| 4035 |
} |
| 4036 |
|
| 4037 |
static s32 |
| 4038 |
brcmf_wowl_nd_results(struct brcmf_if *ifp, const struct brcmf_event_msg *e, |
| 4039 |
void *data) |
| 4040 |
{ |
| 4041 |
struct brcmf_pub *drvr = ifp->drvr; |
| 4042 |
struct brcmf_cfg80211_info *cfg = drvr->config; |
| 4043 |
struct brcmf_pno_scanresults_le *pfn_result; |
| 4044 |
struct brcmf_pno_net_info_le *netinfo; |
| 4045 |
|
| 4046 |
brcmf_dbg(SCAN, "Enter\n"); |
| 4047 |
|
| 4048 |
if (e->datalen < (sizeof(*pfn_result) + sizeof(*netinfo))) { |
| 4049 |
brcmf_dbg(SCAN, "Event data too small. Ignore\n"); |
| 4050 |
return 0; |
| 4051 |
} |
| 4052 |
|
| 4053 |
pfn_result = (struct brcmf_pno_scanresults_le *)data; |
| 4054 |
|
| 4055 |
if (e->event_code == BRCMF_E_PFN_NET_LOST) { |
| 4056 |
brcmf_dbg(SCAN, "PFN NET LOST event. Ignore\n"); |
| 4057 |
return 0; |
| 4058 |
} |
| 4059 |
|
| 4060 |
if (le32_to_cpu(pfn_result->count) < 1) { |
| 4061 |
bphy_err(drvr, "Invalid result count, expected 1 (%d)\n", |
| 4062 |
le32_to_cpu(pfn_result->count)); |
| 4063 |
return -EINVAL; |
| 4064 |
} |
| 4065 |
|
| 4066 |
netinfo = brcmf_get_netinfo_array(pfn_result); |
| 4067 |
if (netinfo->SSID_len > IEEE80211_MAX_SSID_LEN) |
| 4068 |
netinfo->SSID_len = IEEE80211_MAX_SSID_LEN; |
| 4069 |
memcpy(cfg->wowl.nd->ssid.ssid, netinfo->SSID, netinfo->SSID_len); |
| 4070 |
cfg->wowl.nd->ssid.ssid_len = netinfo->SSID_len; |
| 4071 |
cfg->wowl.nd->n_channels = 1; |
| 4072 |
cfg->wowl.nd->channels[0] = |
| 4073 |
ieee80211_channel_to_frequency(netinfo->channel, |
| 4074 |
netinfo->channel <= CH_MAX_2G_CHANNEL ? |
| 4075 |
NL80211_BAND_2GHZ : NL80211_BAND_5GHZ); |
| 4076 |
cfg->wowl.nd_info->n_matches = 1; |
| 4077 |
cfg->wowl.nd_info->matches[0] = cfg->wowl.nd; |
| 4078 |
|
| 4079 |
/* Inform (the resume task) that the net detect information was recvd */ |
| 4080 |
cfg->wowl.nd_data_completed = true; |
| 4081 |
wake_up(&cfg->wowl.nd_data_wait); |
| 4082 |
|
| 4083 |
return 0; |
| 4084 |
} |
| 4085 |
|
| 4086 |
#ifdef CONFIG_PM |
| 4087 |
|
| 4088 |
static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp) |
| 4089 |
{ |
| 4090 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 4091 |
struct brcmf_pub *drvr = cfg->pub; |
| 4092 |
struct brcmf_wowl_wakeind_le wake_ind_le; |
| 4093 |
struct cfg80211_wowlan_wakeup wakeup_data; |
| 4094 |
struct cfg80211_wowlan_wakeup *wakeup; |
| 4095 |
u32 wakeind; |
| 4096 |
s32 err; |
| 4097 |
long time_left; |
| 4098 |
|
| 4099 |
err = brcmf_fil_iovar_data_get(ifp, "wowl_wakeind", &wake_ind_le, |
| 4100 |
sizeof(wake_ind_le)); |
| 4101 |
if (err) { |
| 4102 |
bphy_err(drvr, "Get wowl_wakeind failed, err = %d\n", err); |
| 4103 |
return; |
| 4104 |
} |
| 4105 |
|
| 4106 |
wakeind = le32_to_cpu(wake_ind_le.ucode_wakeind); |
| 4107 |
if (wakeind & (BRCMF_WOWL_MAGIC | BRCMF_WOWL_DIS | BRCMF_WOWL_BCN | |
| 4108 |
BRCMF_WOWL_RETR | BRCMF_WOWL_NET | |
| 4109 |
BRCMF_WOWL_PFN_FOUND)) { |
| 4110 |
wakeup = &wakeup_data; |
| 4111 |
memset(&wakeup_data, 0, sizeof(wakeup_data)); |
| 4112 |
wakeup_data.pattern_idx = -1; |
| 4113 |
|
| 4114 |
if (wakeind & BRCMF_WOWL_MAGIC) { |
| 4115 |
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_MAGIC\n"); |
| 4116 |
wakeup_data.magic_pkt = true; |
| 4117 |
} |
| 4118 |
if (wakeind & BRCMF_WOWL_DIS) { |
| 4119 |
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_DIS\n"); |
| 4120 |
wakeup_data.disconnect = true; |
| 4121 |
} |
| 4122 |
if (wakeind & BRCMF_WOWL_BCN) { |
| 4123 |
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_BCN\n"); |
| 4124 |
wakeup_data.disconnect = true; |
| 4125 |
} |
| 4126 |
if (wakeind & BRCMF_WOWL_RETR) { |
| 4127 |
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_RETR\n"); |
| 4128 |
wakeup_data.disconnect = true; |
| 4129 |
} |
| 4130 |
if (wakeind & BRCMF_WOWL_NET) { |
| 4131 |
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_NET\n"); |
| 4132 |
/* For now always map to pattern 0, no API to get |
| 4133 |
* correct information available at the moment. |
| 4134 |
*/ |
| 4135 |
wakeup_data.pattern_idx = 0; |
| 4136 |
} |
| 4137 |
if (wakeind & BRCMF_WOWL_PFN_FOUND) { |
| 4138 |
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_PFN_FOUND\n"); |
| 4139 |
time_left = wait_event_timeout(cfg->wowl.nd_data_wait, |
| 4140 |
cfg->wowl.nd_data_completed, |
| 4141 |
BRCMF_ND_INFO_TIMEOUT); |
| 4142 |
if (!time_left) |
| 4143 |
bphy_err(drvr, "No result for wowl net detect\n"); |
| 4144 |
else |
| 4145 |
wakeup_data.net_detect = cfg->wowl.nd_info; |
| 4146 |
} |
| 4147 |
if (wakeind & BRCMF_WOWL_GTK_FAILURE) { |
| 4148 |
brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_GTK_FAILURE\n"); |
| 4149 |
wakeup_data.gtk_rekey_failure = true; |
| 4150 |
} |
| 4151 |
} else { |
| 4152 |
wakeup = NULL; |
| 4153 |
} |
| 4154 |
cfg80211_report_wowlan_wakeup(&ifp->vif->wdev, wakeup, GFP_KERNEL); |
| 4155 |
} |
| 4156 |
|
| 4157 |
#else |
| 4158 |
|
| 4159 |
static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp) |
| 4160 |
{ |
| 4161 |
} |
| 4162 |
|
| 4163 |
#endif /* CONFIG_PM */ |
| 4164 |
|
| 4165 |
static s32 brcmf_cfg80211_resume(struct wiphy *wiphy) |
| 4166 |
{ |
| 4167 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 4168 |
struct net_device *ndev = cfg_to_ndev(cfg); |
| 4169 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 4170 |
|
| 4171 |
brcmf_dbg(TRACE, "Enter\n"); |
| 4172 |
|
| 4173 |
if (cfg->wowl.active) { |
| 4174 |
brcmf_report_wowl_wakeind(wiphy, ifp); |
| 4175 |
brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0); |
| 4176 |
brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0); |
| 4177 |
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND)) |
| 4178 |
brcmf_configure_arp_nd_offload(ifp, true); |
| 4179 |
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, |
| 4180 |
cfg->wowl.pre_pmmode); |
| 4181 |
cfg->wowl.active = false; |
| 4182 |
if (cfg->wowl.nd_enabled) { |
| 4183 |
brcmf_cfg80211_sched_scan_stop(cfg->wiphy, ifp->ndev, 0); |
| 4184 |
brcmf_fweh_unregister(cfg->pub, BRCMF_E_PFN_NET_FOUND); |
| 4185 |
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND, |
| 4186 |
brcmf_notify_sched_scan_results); |
| 4187 |
cfg->wowl.nd_enabled = false; |
| 4188 |
} |
| 4189 |
} |
| 4190 |
return 0; |
| 4191 |
} |
| 4192 |
|
| 4193 |
static void brcmf_configure_wowl(struct brcmf_cfg80211_info *cfg, |
| 4194 |
struct brcmf_if *ifp, |
| 4195 |
struct cfg80211_wowlan *wowl) |
| 4196 |
{ |
| 4197 |
u32 wowl_config; |
| 4198 |
struct brcmf_wowl_wakeind_le wowl_wakeind; |
| 4199 |
u32 i; |
| 4200 |
|
| 4201 |
brcmf_dbg(TRACE, "Suspend, wowl config.\n"); |
| 4202 |
|
| 4203 |
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ARP_ND)) |
| 4204 |
brcmf_configure_arp_nd_offload(ifp, false); |
| 4205 |
brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->wowl.pre_pmmode); |
| 4206 |
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX); |
| 4207 |
|
| 4208 |
wowl_config = 0; |
| 4209 |
if (wowl->disconnect) |
| 4210 |
wowl_config = BRCMF_WOWL_DIS | BRCMF_WOWL_BCN | BRCMF_WOWL_RETR; |
| 4211 |
if (wowl->magic_pkt) |
| 4212 |
wowl_config |= BRCMF_WOWL_MAGIC; |
| 4213 |
if ((wowl->patterns) && (wowl->n_patterns)) { |
| 4214 |
wowl_config |= BRCMF_WOWL_NET; |
| 4215 |
for (i = 0; i < wowl->n_patterns; i++) { |
| 4216 |
brcmf_config_wowl_pattern(ifp, "add", |
| 4217 |
(u8 *)wowl->patterns[i].pattern, |
| 4218 |
wowl->patterns[i].pattern_len, |
| 4219 |
(u8 *)wowl->patterns[i].mask, |
| 4220 |
wowl->patterns[i].pkt_offset); |
| 4221 |
} |
| 4222 |
} |
| 4223 |
if (wowl->nd_config) { |
| 4224 |
brcmf_cfg80211_sched_scan_start(cfg->wiphy, ifp->ndev, |
| 4225 |
wowl->nd_config); |
| 4226 |
wowl_config |= BRCMF_WOWL_PFN_FOUND; |
| 4227 |
|
| 4228 |
cfg->wowl.nd_data_completed = false; |
| 4229 |
cfg->wowl.nd_enabled = true; |
| 4230 |
/* Now reroute the event for PFN to the wowl function. */ |
| 4231 |
brcmf_fweh_unregister(cfg->pub, BRCMF_E_PFN_NET_FOUND); |
| 4232 |
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND, |
| 4233 |
brcmf_wowl_nd_results); |
| 4234 |
} |
| 4235 |
if (wowl->gtk_rekey_failure) |
| 4236 |
wowl_config |= BRCMF_WOWL_GTK_FAILURE; |
| 4237 |
if (!test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state)) |
| 4238 |
wowl_config |= BRCMF_WOWL_UNASSOC; |
| 4239 |
|
| 4240 |
memcpy(&wowl_wakeind, "clear", 6); |
| 4241 |
brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", &wowl_wakeind, |
| 4242 |
sizeof(wowl_wakeind)); |
| 4243 |
brcmf_fil_iovar_int_set(ifp, "wowl", wowl_config); |
| 4244 |
brcmf_fil_iovar_int_set(ifp, "wowl_activate", 1); |
| 4245 |
brcmf_bus_wowl_config(cfg->pub->bus_if, true); |
| 4246 |
cfg->wowl.active = true; |
| 4247 |
} |
| 4248 |
|
| 4249 |
static int brcmf_keepalive_start(struct brcmf_if *ifp, unsigned int interval) |
| 4250 |
{ |
| 4251 |
struct brcmf_mkeep_alive_pkt_le kalive = {0}; |
| 4252 |
int ret = 0; |
| 4253 |
|
| 4254 |
/* Configure Null function/data keepalive */ |
| 4255 |
kalive.version = cpu_to_le16(1); |
| 4256 |
kalive.period_msec = cpu_to_le32(interval * MSEC_PER_SEC); |
| 4257 |
kalive.len_bytes = cpu_to_le16(0); |
| 4258 |
kalive.keep_alive_id = 0; |
| 4259 |
|
| 4260 |
ret = brcmf_fil_iovar_data_set(ifp, "mkeep_alive", &kalive, sizeof(kalive)); |
| 4261 |
if (ret) |
| 4262 |
brcmf_err("keep-alive packet config failed, ret=%d\n", ret); |
| 4263 |
|
| 4264 |
return ret; |
| 4265 |
} |
| 4266 |
|
| 4267 |
static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy, |
| 4268 |
struct cfg80211_wowlan *wowl) |
| 4269 |
{ |
| 4270 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 4271 |
struct net_device *ndev = cfg_to_ndev(cfg); |
| 4272 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 4273 |
struct brcmf_cfg80211_vif *vif; |
| 4274 |
|
| 4275 |
brcmf_dbg(TRACE, "Enter\n"); |
| 4276 |
|
| 4277 |
/* if the primary net_device is not READY there is nothing |
| 4278 |
* we can do but pray resume goes smoothly. |
| 4279 |
*/ |
| 4280 |
if (!check_vif_up(ifp->vif)) |
| 4281 |
goto exit; |
| 4282 |
|
| 4283 |
/* Stop scheduled scan */ |
| 4284 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) |
| 4285 |
brcmf_cfg80211_sched_scan_stop(wiphy, ndev, 0); |
| 4286 |
|
| 4287 |
/* end any scanning */ |
| 4288 |
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) |
| 4289 |
brcmf_abort_scanning(cfg); |
| 4290 |
|
| 4291 |
if (wowl == NULL) { |
| 4292 |
brcmf_bus_wowl_config(cfg->pub->bus_if, false); |
| 4293 |
list_for_each_entry(vif, &cfg->vif_list, list) { |
| 4294 |
if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state)) |
| 4295 |
continue; |
| 4296 |
/* While going to suspend if associated with AP |
| 4297 |
* disassociate from AP to save power while system is |
| 4298 |
* in suspended state |
| 4299 |
*/ |
| 4300 |
brcmf_link_down(vif, WLAN_REASON_UNSPECIFIED, true); |
| 4301 |
/* Make sure WPA_Supplicant receives all the event |
| 4302 |
* generated due to DISASSOC call to the fw to keep |
| 4303 |
* the state fw and WPA_Supplicant state consistent |
| 4304 |
*/ |
| 4305 |
brcmf_delay(500); |
| 4306 |
} |
| 4307 |
/* Configure MPC */ |
| 4308 |
brcmf_set_mpc(ifp, 1); |
| 4309 |
|
| 4310 |
} else { |
| 4311 |
/* Configure WOWL parameters */ |
| 4312 |
brcmf_configure_wowl(cfg, ifp, wowl); |
| 4313 |
|
| 4314 |
/* Prevent disassociation due to inactivity with keep-alive */ |
| 4315 |
brcmf_keepalive_start(ifp, 30); |
| 4316 |
} |
| 4317 |
|
| 4318 |
exit: |
| 4319 |
brcmf_dbg(TRACE, "Exit\n"); |
| 4320 |
/* clear any scanning activity */ |
| 4321 |
cfg->scan_status = 0; |
| 4322 |
return 0; |
| 4323 |
} |
| 4324 |
|
| 4325 |
static s32 |
| 4326 |
brcmf_pmksa_v3_op(struct brcmf_if *ifp, struct cfg80211_pmksa *pmksa, |
| 4327 |
bool alive) |
| 4328 |
{ |
| 4329 |
struct brcmf_pmk_op_v3_le *pmk_op; |
| 4330 |
int length = offsetof(struct brcmf_pmk_op_v3_le, pmk); |
| 4331 |
int ret; |
| 4332 |
|
| 4333 |
pmk_op = kzalloc_obj(*pmk_op); |
| 4334 |
if (!pmk_op) |
| 4335 |
return -ENOMEM; |
| 4336 |
|
| 4337 |
pmk_op->version = cpu_to_le16(BRCMF_PMKSA_VER_3); |
| 4338 |
|
| 4339 |
if (!pmksa) { |
| 4340 |
/* Flush operation, operate on entire list */ |
| 4341 |
pmk_op->count = cpu_to_le16(0); |
| 4342 |
} else { |
| 4343 |
/* Single PMK operation */ |
| 4344 |
pmk_op->count = cpu_to_le16(1); |
| 4345 |
length += sizeof(struct brcmf_pmksa_v3); |
| 4346 |
if (pmksa->bssid) |
| 4347 |
memcpy(pmk_op->pmk[0].bssid, pmksa->bssid, ETH_ALEN); |
| 4348 |
if (pmksa->pmkid) { |
| 4349 |
memcpy(pmk_op->pmk[0].pmkid, pmksa->pmkid, WLAN_PMKID_LEN); |
| 4350 |
pmk_op->pmk[0].pmkid_len = WLAN_PMKID_LEN; |
| 4351 |
} |
| 4352 |
if (pmksa->ssid && pmksa->ssid_len) { |
| 4353 |
memcpy(pmk_op->pmk[0].ssid.SSID, pmksa->ssid, pmksa->ssid_len); |
| 4354 |
pmk_op->pmk[0].ssid.SSID_len = pmksa->ssid_len; |
| 4355 |
} |
| 4356 |
pmk_op->pmk[0].time_left = cpu_to_le32(alive ? BRCMF_PMKSA_NO_EXPIRY : 0); |
| 4357 |
} |
| 4358 |
|
| 4359 |
pmk_op->length = cpu_to_le16(length); |
| 4360 |
|
| 4361 |
ret = brcmf_fil_iovar_data_set(ifp, "pmkid_info", pmk_op, sizeof(*pmk_op)); |
| 4362 |
kfree(pmk_op); |
| 4363 |
return ret; |
| 4364 |
} |
| 4365 |
|
| 4366 |
static __used s32 |
| 4367 |
brcmf_update_pmklist(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp) |
| 4368 |
{ |
| 4369 |
struct brcmf_pmk_list_le *pmk_list; |
| 4370 |
int i; |
| 4371 |
u32 npmk; |
| 4372 |
|
| 4373 |
pmk_list = &cfg->pmk_list; |
| 4374 |
npmk = le32_to_cpu(pmk_list->npmk); |
| 4375 |
|
| 4376 |
brcmf_dbg(CONN, "No of elements %d\n", npmk); |
| 4377 |
for (i = 0; i < npmk; i++) |
| 4378 |
brcmf_dbg(CONN, "PMK[%d]: %pM\n", i, &pmk_list->pmk[i].bssid); |
| 4379 |
|
| 4380 |
return brcmf_fil_iovar_data_set(ifp, "pmkid_info", pmk_list, |
| 4381 |
sizeof(*pmk_list)); |
| 4382 |
} |
| 4383 |
|
| 4384 |
static s32 |
| 4385 |
brcmf_cfg80211_set_pmksa(struct wiphy *wiphy, struct net_device *ndev, |
| 4386 |
struct cfg80211_pmksa *pmksa) |
| 4387 |
{ |
| 4388 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 4389 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 4390 |
struct brcmf_pmksa *pmk = &cfg->pmk_list.pmk[0]; |
| 4391 |
struct brcmf_pub *drvr = cfg->pub; |
| 4392 |
s32 err; |
| 4393 |
u32 npmk, i; |
| 4394 |
|
| 4395 |
brcmf_dbg(TRACE, "Enter\n"); |
| 4396 |
if (!check_vif_up(ifp->vif)) |
| 4397 |
return -EIO; |
| 4398 |
|
| 4399 |
brcmf_dbg(CONN, "set_pmksa - PMK bssid: %pM =\n", pmksa->bssid); |
| 4400 |
brcmf_dbg(CONN, "%*ph\n", WLAN_PMKID_LEN, pmksa->pmkid); |
| 4401 |
|
| 4402 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PMKID_V3)) |
| 4403 |
return brcmf_pmksa_v3_op(ifp, pmksa, true); |
| 4404 |
|
| 4405 |
/* TODO: implement PMKID_V2 */ |
| 4406 |
|
| 4407 |
npmk = le32_to_cpu(cfg->pmk_list.npmk); |
| 4408 |
for (i = 0; i < npmk; i++) |
| 4409 |
if (!memcmp(pmksa->bssid, pmk[i].bssid, ETH_ALEN)) |
| 4410 |
break; |
| 4411 |
if (i < BRCMF_MAXPMKID) { |
| 4412 |
memcpy(pmk[i].bssid, pmksa->bssid, ETH_ALEN); |
| 4413 |
memcpy(pmk[i].pmkid, pmksa->pmkid, WLAN_PMKID_LEN); |
| 4414 |
if (i == npmk) { |
| 4415 |
npmk++; |
| 4416 |
cfg->pmk_list.npmk = cpu_to_le32(npmk); |
| 4417 |
} |
| 4418 |
} else { |
| 4419 |
bphy_err(drvr, "Too many PMKSA entries cached %d\n", npmk); |
| 4420 |
return -EINVAL; |
| 4421 |
} |
| 4422 |
|
| 4423 |
err = brcmf_update_pmklist(cfg, ifp); |
| 4424 |
|
| 4425 |
brcmf_dbg(TRACE, "Exit\n"); |
| 4426 |
return err; |
| 4427 |
} |
| 4428 |
|
| 4429 |
static s32 |
| 4430 |
brcmf_cfg80211_del_pmksa(struct wiphy *wiphy, struct net_device *ndev, |
| 4431 |
struct cfg80211_pmksa *pmksa) |
| 4432 |
{ |
| 4433 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 4434 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 4435 |
struct brcmf_pmksa *pmk = &cfg->pmk_list.pmk[0]; |
| 4436 |
struct brcmf_pub *drvr = cfg->pub; |
| 4437 |
s32 err; |
| 4438 |
u32 npmk, i; |
| 4439 |
|
| 4440 |
brcmf_dbg(TRACE, "Enter\n"); |
| 4441 |
if (!check_vif_up(ifp->vif)) |
| 4442 |
return -EIO; |
| 4443 |
|
| 4444 |
brcmf_dbg(CONN, "del_pmksa - PMK bssid = %pM\n", pmksa->bssid); |
| 4445 |
|
| 4446 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PMKID_V3)) |
| 4447 |
return brcmf_pmksa_v3_op(ifp, pmksa, false); |
| 4448 |
|
| 4449 |
/* TODO: implement PMKID_V2 */ |
| 4450 |
|
| 4451 |
npmk = le32_to_cpu(cfg->pmk_list.npmk); |
| 4452 |
for (i = 0; i < npmk; i++) |
| 4453 |
if (!memcmp(pmksa->bssid, pmk[i].bssid, ETH_ALEN)) |
| 4454 |
break; |
| 4455 |
|
| 4456 |
if ((npmk > 0) && (i < npmk)) { |
| 4457 |
for (; i < (npmk - 1); i++) { |
| 4458 |
memcpy(&pmk[i].bssid, &pmk[i + 1].bssid, ETH_ALEN); |
| 4459 |
memcpy(&pmk[i].pmkid, &pmk[i + 1].pmkid, |
| 4460 |
WLAN_PMKID_LEN); |
| 4461 |
} |
| 4462 |
memset(&pmk[i], 0, sizeof(*pmk)); |
| 4463 |
cfg->pmk_list.npmk = cpu_to_le32(npmk - 1); |
| 4464 |
} else { |
| 4465 |
bphy_err(drvr, "Cache entry not found\n"); |
| 4466 |
return -EINVAL; |
| 4467 |
} |
| 4468 |
|
| 4469 |
err = brcmf_update_pmklist(cfg, ifp); |
| 4470 |
|
| 4471 |
brcmf_dbg(TRACE, "Exit\n"); |
| 4472 |
return err; |
| 4473 |
|
| 4474 |
} |
| 4475 |
|
| 4476 |
static s32 |
| 4477 |
brcmf_cfg80211_flush_pmksa(struct wiphy *wiphy, struct net_device *ndev) |
| 4478 |
{ |
| 4479 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 4480 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 4481 |
s32 err; |
| 4482 |
|
| 4483 |
brcmf_dbg(TRACE, "Enter\n"); |
| 4484 |
if (!check_vif_up(ifp->vif)) |
| 4485 |
return -EIO; |
| 4486 |
|
| 4487 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PMKID_V3)) |
| 4488 |
return brcmf_pmksa_v3_op(ifp, NULL, false); |
| 4489 |
|
| 4490 |
/* TODO: implement PMKID_V2 */ |
| 4491 |
|
| 4492 |
memset(&cfg->pmk_list, 0, sizeof(cfg->pmk_list)); |
| 4493 |
err = brcmf_update_pmklist(cfg, ifp); |
| 4494 |
|
| 4495 |
brcmf_dbg(TRACE, "Exit\n"); |
| 4496 |
return err; |
| 4497 |
|
| 4498 |
} |
| 4499 |
|
| 4500 |
static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp) |
| 4501 |
{ |
| 4502 |
struct brcmf_pub *drvr = ifp->drvr; |
| 4503 |
s32 err; |
| 4504 |
s32 wpa_val; |
| 4505 |
|
| 4506 |
/* set auth */ |
| 4507 |
err = brcmf_fil_bsscfg_int_set(ifp, "auth", 0); |
| 4508 |
if (err < 0) { |
| 4509 |
bphy_err(drvr, "auth error %d\n", err); |
| 4510 |
return err; |
| 4511 |
} |
| 4512 |
/* set wsec */ |
| 4513 |
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", 0); |
| 4514 |
if (err < 0) { |
| 4515 |
bphy_err(drvr, "wsec error %d\n", err); |
| 4516 |
return err; |
| 4517 |
} |
| 4518 |
/* set upper-layer auth */ |
| 4519 |
if (brcmf_is_ibssmode(ifp->vif)) |
| 4520 |
wpa_val = WPA_AUTH_NONE; |
| 4521 |
else |
| 4522 |
wpa_val = WPA_AUTH_DISABLED; |
| 4523 |
err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_val); |
| 4524 |
if (err < 0) { |
| 4525 |
bphy_err(drvr, "wpa_auth error %d\n", err); |
| 4526 |
return err; |
| 4527 |
} |
| 4528 |
|
| 4529 |
return 0; |
| 4530 |
} |
| 4531 |
|
| 4532 |
static bool brcmf_valid_wpa_oui(u8 *oui, bool is_rsn_ie) |
| 4533 |
{ |
| 4534 |
if (is_rsn_ie) |
| 4535 |
return (memcmp(oui, RSN_OUI, TLV_OUI_LEN) == 0); |
| 4536 |
|
| 4537 |
return (memcmp(oui, WPA_OUI, TLV_OUI_LEN) == 0); |
| 4538 |
} |
| 4539 |
|
| 4540 |
static s32 |
| 4541 |
brcmf_configure_wpaie(struct brcmf_if *ifp, |
| 4542 |
const struct brcmf_vs_tlv *wpa_ie, |
| 4543 |
bool is_rsn_ie) |
| 4544 |
{ |
| 4545 |
struct brcmf_pub *drvr = ifp->drvr; |
| 4546 |
u32 auth = 0; /* d11 open authentication */ |
| 4547 |
u16 count; |
| 4548 |
s32 err = 0; |
| 4549 |
s32 len; |
| 4550 |
u32 i; |
| 4551 |
u32 wsec; |
| 4552 |
u32 pval = 0; |
| 4553 |
u32 gval = 0; |
| 4554 |
u32 wpa_auth = 0; |
| 4555 |
u32 offset; |
| 4556 |
u8 *data; |
| 4557 |
u16 rsn_cap; |
| 4558 |
u32 wme_bss_disable; |
| 4559 |
u32 mfp; |
| 4560 |
|
| 4561 |
brcmf_dbg(TRACE, "Enter\n"); |
| 4562 |
if (wpa_ie == NULL) |
| 4563 |
goto exit; |
| 4564 |
|
| 4565 |
len = wpa_ie->len + TLV_HDR_LEN; |
| 4566 |
data = (u8 *)wpa_ie; |
| 4567 |
offset = TLV_HDR_LEN; |
| 4568 |
if (!is_rsn_ie) |
| 4569 |
offset += VS_IE_FIXED_HDR_LEN; |
| 4570 |
else |
| 4571 |
offset += WPA_IE_VERSION_LEN; |
| 4572 |
|
| 4573 |
/* check for multicast cipher suite */ |
| 4574 |
if (offset + WPA_IE_MIN_OUI_LEN > len) { |
| 4575 |
err = -EINVAL; |
| 4576 |
bphy_err(drvr, "no multicast cipher suite\n"); |
| 4577 |
goto exit; |
| 4578 |
} |
| 4579 |
|
| 4580 |
if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) { |
| 4581 |
err = -EINVAL; |
| 4582 |
bphy_err(drvr, "invalid OUI\n"); |
| 4583 |
goto exit; |
| 4584 |
} |
| 4585 |
offset += TLV_OUI_LEN; |
| 4586 |
|
| 4587 |
/* pick up multicast cipher */ |
| 4588 |
switch (data[offset]) { |
| 4589 |
case WPA_CIPHER_NONE: |
| 4590 |
gval = 0; |
| 4591 |
break; |
| 4592 |
case WPA_CIPHER_WEP_40: |
| 4593 |
case WPA_CIPHER_WEP_104: |
| 4594 |
gval = WEP_ENABLED; |
| 4595 |
break; |
| 4596 |
case WPA_CIPHER_TKIP: |
| 4597 |
gval = TKIP_ENABLED; |
| 4598 |
break; |
| 4599 |
case WPA_CIPHER_AES_CCM: |
| 4600 |
gval = AES_ENABLED; |
| 4601 |
break; |
| 4602 |
default: |
| 4603 |
err = -EINVAL; |
| 4604 |
bphy_err(drvr, "Invalid multi cast cipher info\n"); |
| 4605 |
goto exit; |
| 4606 |
} |
| 4607 |
|
| 4608 |
offset++; |
| 4609 |
/* walk thru unicast cipher list and pick up what we recognize */ |
| 4610 |
count = data[offset] + (data[offset + 1] << 8); |
| 4611 |
offset += WPA_IE_SUITE_COUNT_LEN; |
| 4612 |
/* Check for unicast suite(s) */ |
| 4613 |
if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) { |
| 4614 |
err = -EINVAL; |
| 4615 |
bphy_err(drvr, "no unicast cipher suite\n"); |
| 4616 |
goto exit; |
| 4617 |
} |
| 4618 |
for (i = 0; i < count; i++) { |
| 4619 |
if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) { |
| 4620 |
err = -EINVAL; |
| 4621 |
bphy_err(drvr, "invalid OUI\n"); |
| 4622 |
goto exit; |
| 4623 |
} |
| 4624 |
offset += TLV_OUI_LEN; |
| 4625 |
switch (data[offset]) { |
| 4626 |
case WPA_CIPHER_NONE: |
| 4627 |
break; |
| 4628 |
case WPA_CIPHER_WEP_40: |
| 4629 |
case WPA_CIPHER_WEP_104: |
| 4630 |
pval |= WEP_ENABLED; |
| 4631 |
break; |
| 4632 |
case WPA_CIPHER_TKIP: |
| 4633 |
pval |= TKIP_ENABLED; |
| 4634 |
break; |
| 4635 |
case WPA_CIPHER_AES_CCM: |
| 4636 |
pval |= AES_ENABLED; |
| 4637 |
break; |
| 4638 |
default: |
| 4639 |
bphy_err(drvr, "Invalid unicast security info\n"); |
| 4640 |
} |
| 4641 |
offset++; |
| 4642 |
} |
| 4643 |
/* walk thru auth management suite list and pick up what we recognize */ |
| 4644 |
count = data[offset] + (data[offset + 1] << 8); |
| 4645 |
offset += WPA_IE_SUITE_COUNT_LEN; |
| 4646 |
/* Check for auth key management suite(s) */ |
| 4647 |
if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) { |
| 4648 |
err = -EINVAL; |
| 4649 |
bphy_err(drvr, "no auth key mgmt suite\n"); |
| 4650 |
goto exit; |
| 4651 |
} |
| 4652 |
for (i = 0; i < count; i++) { |
| 4653 |
if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) { |
| 4654 |
err = -EINVAL; |
| 4655 |
bphy_err(drvr, "invalid OUI\n"); |
| 4656 |
goto exit; |
| 4657 |
} |
| 4658 |
offset += TLV_OUI_LEN; |
| 4659 |
switch (data[offset]) { |
| 4660 |
case RSN_AKM_NONE: |
| 4661 |
brcmf_dbg(TRACE, "RSN_AKM_NONE\n"); |
| 4662 |
wpa_auth |= WPA_AUTH_NONE; |
| 4663 |
break; |
| 4664 |
case RSN_AKM_UNSPECIFIED: |
| 4665 |
brcmf_dbg(TRACE, "RSN_AKM_UNSPECIFIED\n"); |
| 4666 |
is_rsn_ie ? (wpa_auth |= WPA2_AUTH_UNSPECIFIED) : |
| 4667 |
(wpa_auth |= WPA_AUTH_UNSPECIFIED); |
| 4668 |
break; |
| 4669 |
case RSN_AKM_PSK: |
| 4670 |
brcmf_dbg(TRACE, "RSN_AKM_PSK\n"); |
| 4671 |
is_rsn_ie ? (wpa_auth |= WPA2_AUTH_PSK) : |
| 4672 |
(wpa_auth |= WPA_AUTH_PSK); |
| 4673 |
break; |
| 4674 |
case RSN_AKM_SHA256_PSK: |
| 4675 |
brcmf_dbg(TRACE, "RSN_AKM_MFP_PSK\n"); |
| 4676 |
wpa_auth |= WPA2_AUTH_PSK_SHA256; |
| 4677 |
break; |
| 4678 |
case RSN_AKM_SHA256_1X: |
| 4679 |
brcmf_dbg(TRACE, "RSN_AKM_MFP_1X\n"); |
| 4680 |
wpa_auth |= WPA2_AUTH_1X_SHA256; |
| 4681 |
break; |
| 4682 |
case RSN_AKM_SAE: |
| 4683 |
brcmf_dbg(TRACE, "RSN_AKM_SAE\n"); |
| 4684 |
wpa_auth |= WPA3_AUTH_SAE_PSK; |
| 4685 |
break; |
| 4686 |
default: |
| 4687 |
bphy_err(drvr, "Invalid key mgmt info\n"); |
| 4688 |
} |
| 4689 |
offset++; |
| 4690 |
} |
| 4691 |
|
| 4692 |
mfp = BRCMF_MFP_NONE; |
| 4693 |
if (is_rsn_ie) { |
| 4694 |
wme_bss_disable = 1; |
| 4695 |
if ((offset + RSN_CAP_LEN) <= len) { |
| 4696 |
rsn_cap = data[offset] + (data[offset + 1] << 8); |
| 4697 |
if (rsn_cap & RSN_CAP_PTK_REPLAY_CNTR_MASK) |
| 4698 |
wme_bss_disable = 0; |
| 4699 |
if (rsn_cap & RSN_CAP_MFPR_MASK) { |
| 4700 |
brcmf_dbg(TRACE, "MFP Required\n"); |
| 4701 |
mfp = BRCMF_MFP_REQUIRED; |
| 4702 |
/* Firmware only supports mfp required in |
| 4703 |
* combination with WPA2_AUTH_PSK_SHA256, |
| 4704 |
* WPA2_AUTH_1X_SHA256, or WPA3_AUTH_SAE_PSK. |
| 4705 |
*/ |
| 4706 |
if (!(wpa_auth & (WPA2_AUTH_PSK_SHA256 | |
| 4707 |
WPA2_AUTH_1X_SHA256 | |
| 4708 |
WPA3_AUTH_SAE_PSK))) { |
| 4709 |
err = -EINVAL; |
| 4710 |
goto exit; |
| 4711 |
} |
| 4712 |
/* Firmware has requirement that WPA2_AUTH_PSK/ |
| 4713 |
* WPA2_AUTH_UNSPECIFIED be set, if SHA256 OUI |
| 4714 |
* is to be included in the rsn ie. |
| 4715 |
*/ |
| 4716 |
if (wpa_auth & WPA2_AUTH_PSK_SHA256) |
| 4717 |
wpa_auth |= WPA2_AUTH_PSK; |
| 4718 |
else if (wpa_auth & WPA2_AUTH_1X_SHA256) |
| 4719 |
wpa_auth |= WPA2_AUTH_UNSPECIFIED; |
| 4720 |
} else if (rsn_cap & RSN_CAP_MFPC_MASK) { |
| 4721 |
brcmf_dbg(TRACE, "MFP Capable\n"); |
| 4722 |
mfp = BRCMF_MFP_CAPABLE; |
| 4723 |
} |
| 4724 |
} |
| 4725 |
offset += RSN_CAP_LEN; |
| 4726 |
/* set wme_bss_disable to sync RSN Capabilities */ |
| 4727 |
err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable", |
| 4728 |
wme_bss_disable); |
| 4729 |
if (err < 0) { |
| 4730 |
bphy_err(drvr, "wme_bss_disable error %d\n", err); |
| 4731 |
goto exit; |
| 4732 |
} |
| 4733 |
|
| 4734 |
/* Skip PMKID cnt as it is know to be 0 for AP. */ |
| 4735 |
offset += RSN_PMKID_COUNT_LEN; |
| 4736 |
|
| 4737 |
/* See if there is BIP wpa suite left for MFP */ |
| 4738 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP) && |
| 4739 |
((offset + WPA_IE_MIN_OUI_LEN) <= len)) { |
| 4740 |
err = brcmf_fil_bsscfg_data_set(ifp, "bip", |
| 4741 |
&data[offset], |
| 4742 |
WPA_IE_MIN_OUI_LEN); |
| 4743 |
if (err < 0) { |
| 4744 |
bphy_err(drvr, "bip error %d\n", err); |
| 4745 |
goto exit; |
| 4746 |
} |
| 4747 |
} |
| 4748 |
} |
| 4749 |
/* FOR WPS , set SES_OW_ENABLED */ |
| 4750 |
wsec = (pval | gval | SES_OW_ENABLED); |
| 4751 |
|
| 4752 |
/* set auth */ |
| 4753 |
err = brcmf_fil_bsscfg_int_set(ifp, "auth", auth); |
| 4754 |
if (err < 0) { |
| 4755 |
bphy_err(drvr, "auth error %d\n", err); |
| 4756 |
goto exit; |
| 4757 |
} |
| 4758 |
/* set wsec */ |
| 4759 |
err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec); |
| 4760 |
if (err < 0) { |
| 4761 |
bphy_err(drvr, "wsec error %d\n", err); |
| 4762 |
goto exit; |
| 4763 |
} |
| 4764 |
/* Configure MFP, this needs to go after wsec otherwise the wsec command |
| 4765 |
* will overwrite the values set by MFP |
| 4766 |
*/ |
| 4767 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) { |
| 4768 |
err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp); |
| 4769 |
if (err < 0) { |
| 4770 |
bphy_err(drvr, "mfp error %d\n", err); |
| 4771 |
goto exit; |
| 4772 |
} |
| 4773 |
} |
| 4774 |
/* set upper-layer auth */ |
| 4775 |
err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth); |
| 4776 |
if (err < 0) { |
| 4777 |
bphy_err(drvr, "wpa_auth error %d\n", err); |
| 4778 |
goto exit; |
| 4779 |
} |
| 4780 |
|
| 4781 |
exit: |
| 4782 |
return err; |
| 4783 |
} |
| 4784 |
|
| 4785 |
static s32 |
| 4786 |
brcmf_parse_vndr_ies(const u8 *vndr_ie_buf, u32 vndr_ie_len, |
| 4787 |
struct parsed_vndr_ies *vndr_ies) |
| 4788 |
{ |
| 4789 |
struct brcmf_vs_tlv *vndrie; |
| 4790 |
struct brcmf_tlv *ie; |
| 4791 |
struct parsed_vndr_ie_info *parsed_info; |
| 4792 |
s32 remaining_len; |
| 4793 |
|
| 4794 |
remaining_len = (s32)vndr_ie_len; |
| 4795 |
memset(vndr_ies, 0, sizeof(*vndr_ies)); |
| 4796 |
|
| 4797 |
ie = (struct brcmf_tlv *)vndr_ie_buf; |
| 4798 |
while (ie) { |
| 4799 |
if (ie->id != WLAN_EID_VENDOR_SPECIFIC) |
| 4800 |
goto next; |
| 4801 |
vndrie = (struct brcmf_vs_tlv *)ie; |
| 4802 |
/* len should be bigger than OUI length + one */ |
| 4803 |
if (vndrie->len < (VS_IE_FIXED_HDR_LEN - TLV_HDR_LEN + 1)) { |
| 4804 |
brcmf_err("invalid vndr ie. length is too small %d\n", |
| 4805 |
vndrie->len); |
| 4806 |
goto next; |
| 4807 |
} |
| 4808 |
/* if wpa or wme ie, do not add ie */ |
| 4809 |
if (!memcmp(vndrie->oui, (u8 *)WPA_OUI, TLV_OUI_LEN) && |
| 4810 |
((vndrie->oui_type == WPA_OUI_TYPE) || |
| 4811 |
(vndrie->oui_type == WME_OUI_TYPE))) { |
| 4812 |
brcmf_dbg(TRACE, "Found WPA/WME oui. Do not add it\n"); |
| 4813 |
goto next; |
| 4814 |
} |
| 4815 |
|
| 4816 |
parsed_info = &vndr_ies->ie_info[vndr_ies->count]; |
| 4817 |
|
| 4818 |
/* save vndr ie information */ |
| 4819 |
parsed_info->ie_ptr = (char *)vndrie; |
| 4820 |
parsed_info->ie_len = vndrie->len + TLV_HDR_LEN; |
| 4821 |
memcpy(&parsed_info->vndrie, vndrie, sizeof(*vndrie)); |
| 4822 |
|
| 4823 |
vndr_ies->count++; |
| 4824 |
|
| 4825 |
brcmf_dbg(TRACE, "** OUI %3ph, type 0x%02x\n", |
| 4826 |
parsed_info->vndrie.oui, |
| 4827 |
parsed_info->vndrie.oui_type); |
| 4828 |
|
| 4829 |
if (vndr_ies->count >= VNDR_IE_PARSE_LIMIT) |
| 4830 |
break; |
| 4831 |
next: |
| 4832 |
remaining_len -= (ie->len + TLV_HDR_LEN); |
| 4833 |
if (remaining_len <= TLV_HDR_LEN) |
| 4834 |
ie = NULL; |
| 4835 |
else |
| 4836 |
ie = (struct brcmf_tlv *)(((u8 *)ie) + ie->len + |
| 4837 |
TLV_HDR_LEN); |
| 4838 |
} |
| 4839 |
return 0; |
| 4840 |
} |
| 4841 |
|
| 4842 |
static u32 |
| 4843 |
brcmf_vndr_ie(u8 *iebuf, s32 pktflag, u8 *ie_ptr, u32 ie_len, s8 *add_del_cmd) |
| 4844 |
{ |
| 4845 |
strscpy(iebuf, add_del_cmd, VNDR_IE_CMD_LEN); |
| 4846 |
|
| 4847 |
put_unaligned_le32(1, &iebuf[VNDR_IE_COUNT_OFFSET]); |
| 4848 |
|
| 4849 |
put_unaligned_le32(pktflag, &iebuf[VNDR_IE_PKTFLAG_OFFSET]); |
| 4850 |
|
| 4851 |
memcpy(&iebuf[VNDR_IE_VSIE_OFFSET], ie_ptr, ie_len); |
| 4852 |
|
| 4853 |
return ie_len + VNDR_IE_HDR_SIZE; |
| 4854 |
} |
| 4855 |
|
| 4856 |
s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, |
| 4857 |
const u8 *vndr_ie_buf, u32 vndr_ie_len) |
| 4858 |
{ |
| 4859 |
struct brcmf_pub *drvr; |
| 4860 |
struct brcmf_if *ifp; |
| 4861 |
struct vif_saved_ie *saved_ie; |
| 4862 |
s32 err = 0; |
| 4863 |
u8 *iovar_ie_buf; |
| 4864 |
u8 *curr_ie_buf; |
| 4865 |
u8 *mgmt_ie_buf = NULL; |
| 4866 |
int mgmt_ie_buf_len; |
| 4867 |
u32 *mgmt_ie_len; |
| 4868 |
u32 del_add_ie_buf_len = 0; |
| 4869 |
u32 total_ie_buf_len = 0; |
| 4870 |
u32 parsed_ie_buf_len = 0; |
| 4871 |
struct parsed_vndr_ies old_vndr_ies; |
| 4872 |
struct parsed_vndr_ies new_vndr_ies; |
| 4873 |
struct parsed_vndr_ie_info *vndrie_info; |
| 4874 |
s32 i; |
| 4875 |
u8 *ptr; |
| 4876 |
int remained_buf_len; |
| 4877 |
|
| 4878 |
if (!vif) |
| 4879 |
return -ENODEV; |
| 4880 |
ifp = vif->ifp; |
| 4881 |
drvr = ifp->drvr; |
| 4882 |
saved_ie = &vif->saved_ie; |
| 4883 |
|
| 4884 |
brcmf_dbg(TRACE, "bsscfgidx %d, pktflag : 0x%02X\n", ifp->bsscfgidx, |
| 4885 |
pktflag); |
| 4886 |
iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); |
| 4887 |
if (!iovar_ie_buf) |
| 4888 |
return -ENOMEM; |
| 4889 |
curr_ie_buf = iovar_ie_buf; |
| 4890 |
switch (pktflag) { |
| 4891 |
case BRCMF_VNDR_IE_PRBREQ_FLAG: |
| 4892 |
mgmt_ie_buf = saved_ie->probe_req_ie; |
| 4893 |
mgmt_ie_len = &saved_ie->probe_req_ie_len; |
| 4894 |
mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); |
| 4895 |
break; |
| 4896 |
case BRCMF_VNDR_IE_PRBRSP_FLAG: |
| 4897 |
mgmt_ie_buf = saved_ie->probe_res_ie; |
| 4898 |
mgmt_ie_len = &saved_ie->probe_res_ie_len; |
| 4899 |
mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); |
| 4900 |
break; |
| 4901 |
case BRCMF_VNDR_IE_BEACON_FLAG: |
| 4902 |
mgmt_ie_buf = saved_ie->beacon_ie; |
| 4903 |
mgmt_ie_len = &saved_ie->beacon_ie_len; |
| 4904 |
mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie); |
| 4905 |
break; |
| 4906 |
case BRCMF_VNDR_IE_ASSOCREQ_FLAG: |
| 4907 |
mgmt_ie_buf = saved_ie->assoc_req_ie; |
| 4908 |
mgmt_ie_len = &saved_ie->assoc_req_ie_len; |
| 4909 |
mgmt_ie_buf_len = sizeof(saved_ie->assoc_req_ie); |
| 4910 |
break; |
| 4911 |
case BRCMF_VNDR_IE_ASSOCRSP_FLAG: |
| 4912 |
mgmt_ie_buf = saved_ie->assoc_res_ie; |
| 4913 |
mgmt_ie_len = &saved_ie->assoc_res_ie_len; |
| 4914 |
mgmt_ie_buf_len = sizeof(saved_ie->assoc_res_ie); |
| 4915 |
break; |
| 4916 |
default: |
| 4917 |
err = -EPERM; |
| 4918 |
bphy_err(drvr, "not suitable type\n"); |
| 4919 |
goto exit; |
| 4920 |
} |
| 4921 |
|
| 4922 |
if (vndr_ie_len > mgmt_ie_buf_len) { |
| 4923 |
err = -ENOMEM; |
| 4924 |
bphy_err(drvr, "extra IE size too big\n"); |
| 4925 |
goto exit; |
| 4926 |
} |
| 4927 |
|
| 4928 |
/* parse and save new vndr_ie in curr_ie_buff before comparing it */ |
| 4929 |
if (vndr_ie_buf && vndr_ie_len && curr_ie_buf) { |
| 4930 |
ptr = curr_ie_buf; |
| 4931 |
brcmf_parse_vndr_ies(vndr_ie_buf, vndr_ie_len, &new_vndr_ies); |
| 4932 |
for (i = 0; i < new_vndr_ies.count; i++) { |
| 4933 |
vndrie_info = &new_vndr_ies.ie_info[i]; |
| 4934 |
memcpy(ptr + parsed_ie_buf_len, vndrie_info->ie_ptr, |
| 4935 |
vndrie_info->ie_len); |
| 4936 |
parsed_ie_buf_len += vndrie_info->ie_len; |
| 4937 |
} |
| 4938 |
} |
| 4939 |
|
| 4940 |
if (mgmt_ie_buf && *mgmt_ie_len) { |
| 4941 |
if (parsed_ie_buf_len && (parsed_ie_buf_len == *mgmt_ie_len) && |
| 4942 |
(memcmp(mgmt_ie_buf, curr_ie_buf, |
| 4943 |
parsed_ie_buf_len) == 0)) { |
| 4944 |
brcmf_dbg(TRACE, "Previous mgmt IE equals to current IE\n"); |
| 4945 |
goto exit; |
| 4946 |
} |
| 4947 |
|
| 4948 |
/* parse old vndr_ie */ |
| 4949 |
brcmf_parse_vndr_ies(mgmt_ie_buf, *mgmt_ie_len, &old_vndr_ies); |
| 4950 |
|
| 4951 |
/* make a command to delete old ie */ |
| 4952 |
for (i = 0; i < old_vndr_ies.count; i++) { |
| 4953 |
vndrie_info = &old_vndr_ies.ie_info[i]; |
| 4954 |
|
| 4955 |
brcmf_dbg(TRACE, "DEL ID : %d, Len: %d , OUI:%3ph\n", |
| 4956 |
vndrie_info->vndrie.id, |
| 4957 |
vndrie_info->vndrie.len, |
| 4958 |
vndrie_info->vndrie.oui); |
| 4959 |
|
| 4960 |
del_add_ie_buf_len = brcmf_vndr_ie(curr_ie_buf, pktflag, |
| 4961 |
vndrie_info->ie_ptr, |
| 4962 |
vndrie_info->ie_len, |
| 4963 |
"del"); |
| 4964 |
curr_ie_buf += del_add_ie_buf_len; |
| 4965 |
total_ie_buf_len += del_add_ie_buf_len; |
| 4966 |
} |
| 4967 |
} |
| 4968 |
|
| 4969 |
*mgmt_ie_len = 0; |
| 4970 |
/* Add if there is any extra IE */ |
| 4971 |
if (mgmt_ie_buf && parsed_ie_buf_len) { |
| 4972 |
ptr = mgmt_ie_buf; |
| 4973 |
|
| 4974 |
remained_buf_len = mgmt_ie_buf_len; |
| 4975 |
|
| 4976 |
/* make a command to add new ie */ |
| 4977 |
for (i = 0; i < new_vndr_ies.count; i++) { |
| 4978 |
vndrie_info = &new_vndr_ies.ie_info[i]; |
| 4979 |
|
| 4980 |
/* verify remained buf size before copy data */ |
| 4981 |
if (remained_buf_len < (vndrie_info->vndrie.len + |
| 4982 |
VNDR_IE_VSIE_OFFSET)) { |
| 4983 |
bphy_err(drvr, "no space in mgmt_ie_buf: len left %d", |
| 4984 |
remained_buf_len); |
| 4985 |
break; |
| 4986 |
} |
| 4987 |
remained_buf_len -= (vndrie_info->ie_len + |
| 4988 |
VNDR_IE_VSIE_OFFSET); |
| 4989 |
|
| 4990 |
brcmf_dbg(TRACE, "ADDED ID : %d, Len: %d, OUI:%3ph\n", |
| 4991 |
vndrie_info->vndrie.id, |
| 4992 |
vndrie_info->vndrie.len, |
| 4993 |
vndrie_info->vndrie.oui); |
| 4994 |
|
| 4995 |
del_add_ie_buf_len = brcmf_vndr_ie(curr_ie_buf, pktflag, |
| 4996 |
vndrie_info->ie_ptr, |
| 4997 |
vndrie_info->ie_len, |
| 4998 |
"add"); |
| 4999 |
|
| 5000 |
/* save the parsed IE in wl struct */ |
| 5001 |
memcpy(ptr + (*mgmt_ie_len), vndrie_info->ie_ptr, |
| 5002 |
vndrie_info->ie_len); |
| 5003 |
*mgmt_ie_len += vndrie_info->ie_len; |
| 5004 |
|
| 5005 |
curr_ie_buf += del_add_ie_buf_len; |
| 5006 |
total_ie_buf_len += del_add_ie_buf_len; |
| 5007 |
} |
| 5008 |
} |
| 5009 |
if (total_ie_buf_len) { |
| 5010 |
err = brcmf_fil_bsscfg_data_set(ifp, "vndr_ie", iovar_ie_buf, |
| 5011 |
total_ie_buf_len); |
| 5012 |
if (err) |
| 5013 |
bphy_err(drvr, "vndr ie set error : %d\n", err); |
| 5014 |
} |
| 5015 |
|
| 5016 |
exit: |
| 5017 |
kfree(iovar_ie_buf); |
| 5018 |
return err; |
| 5019 |
} |
| 5020 |
|
| 5021 |
s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif) |
| 5022 |
{ |
| 5023 |
static const s32 pktflags[] = { |
| 5024 |
BRCMF_VNDR_IE_PRBRSP_FLAG, |
| 5025 |
BRCMF_VNDR_IE_BEACON_FLAG |
| 5026 |
}; |
| 5027 |
int i; |
| 5028 |
|
| 5029 |
if (vif->wdev.iftype == NL80211_IFTYPE_AP) |
| 5030 |
brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_ASSOCRSP_FLAG, NULL, 0); |
| 5031 |
else |
| 5032 |
brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, NULL, 0); |
| 5033 |
|
| 5034 |
for (i = 0; i < ARRAY_SIZE(pktflags); i++) |
| 5035 |
brcmf_vif_set_mgmt_ie(vif, pktflags[i], NULL, 0); |
| 5036 |
|
| 5037 |
memset(&vif->saved_ie, 0, sizeof(vif->saved_ie)); |
| 5038 |
return 0; |
| 5039 |
} |
| 5040 |
|
| 5041 |
static s32 |
| 5042 |
brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif, |
| 5043 |
struct cfg80211_beacon_data *beacon) |
| 5044 |
{ |
| 5045 |
struct brcmf_pub *drvr = vif->ifp->drvr; |
| 5046 |
s32 err; |
| 5047 |
|
| 5048 |
/* Set Beacon IEs to FW */ |
| 5049 |
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_BEACON_FLAG, |
| 5050 |
beacon->tail, beacon->tail_len); |
| 5051 |
if (err) { |
| 5052 |
bphy_err(drvr, "Set Beacon IE Failed\n"); |
| 5053 |
return err; |
| 5054 |
} |
| 5055 |
brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n"); |
| 5056 |
|
| 5057 |
/* Set Probe Response IEs to FW */ |
| 5058 |
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBRSP_FLAG, |
| 5059 |
beacon->proberesp_ies, |
| 5060 |
beacon->proberesp_ies_len); |
| 5061 |
if (err) |
| 5062 |
bphy_err(drvr, "Set Probe Resp IE Failed\n"); |
| 5063 |
else |
| 5064 |
brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n"); |
| 5065 |
|
| 5066 |
/* Set Assoc Response IEs to FW */ |
| 5067 |
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_ASSOCRSP_FLAG, |
| 5068 |
beacon->assocresp_ies, |
| 5069 |
beacon->assocresp_ies_len); |
| 5070 |
if (err) |
| 5071 |
brcmf_err("Set Assoc Resp IE Failed\n"); |
| 5072 |
else |
| 5073 |
brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc Resp\n"); |
| 5074 |
|
| 5075 |
return err; |
| 5076 |
} |
| 5077 |
|
| 5078 |
static s32 |
| 5079 |
brcmf_parse_configure_security(struct brcmf_if *ifp, |
| 5080 |
struct cfg80211_ap_settings *settings, |
| 5081 |
enum nl80211_iftype dev_role) |
| 5082 |
{ |
| 5083 |
const struct brcmf_tlv *rsn_ie; |
| 5084 |
const struct brcmf_vs_tlv *wpa_ie; |
| 5085 |
s32 err = 0; |
| 5086 |
|
| 5087 |
/* find the RSN_IE */ |
| 5088 |
rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, |
| 5089 |
settings->beacon.tail_len, WLAN_EID_RSN); |
| 5090 |
|
| 5091 |
/* find the WPA_IE */ |
| 5092 |
wpa_ie = brcmf_find_wpaie((u8 *)settings->beacon.tail, |
| 5093 |
settings->beacon.tail_len); |
| 5094 |
|
| 5095 |
if (wpa_ie || rsn_ie) { |
| 5096 |
brcmf_dbg(TRACE, "WPA(2) IE is found\n"); |
| 5097 |
if (wpa_ie) { |
| 5098 |
/* WPA IE */ |
| 5099 |
err = brcmf_configure_wpaie(ifp, wpa_ie, false); |
| 5100 |
if (err < 0) |
| 5101 |
return err; |
| 5102 |
} else { |
| 5103 |
struct brcmf_vs_tlv *tmp_ie; |
| 5104 |
|
| 5105 |
tmp_ie = (struct brcmf_vs_tlv *)rsn_ie; |
| 5106 |
|
| 5107 |
/* RSN IE */ |
| 5108 |
err = brcmf_configure_wpaie(ifp, tmp_ie, true); |
| 5109 |
if (err < 0) |
| 5110 |
return err; |
| 5111 |
} |
| 5112 |
} else { |
| 5113 |
brcmf_dbg(TRACE, "No WPA(2) IEs found\n"); |
| 5114 |
brcmf_configure_opensecurity(ifp); |
| 5115 |
} |
| 5116 |
|
| 5117 |
return err; |
| 5118 |
} |
| 5119 |
|
| 5120 |
static s32 |
| 5121 |
brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, |
| 5122 |
struct cfg80211_ap_settings *settings) |
| 5123 |
{ |
| 5124 |
s32 ie_offset; |
| 5125 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5126 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 5127 |
struct brcmf_pub *drvr = cfg->pub; |
| 5128 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 5129 |
struct cfg80211_crypto_settings *crypto = &settings->crypto; |
| 5130 |
const struct brcmf_tlv *ssid_ie; |
| 5131 |
const struct brcmf_tlv *country_ie; |
| 5132 |
struct brcmf_ssid_le ssid_le; |
| 5133 |
s32 err = -EPERM; |
| 5134 |
struct brcmf_join_params join_params; |
| 5135 |
enum nl80211_iftype dev_role; |
| 5136 |
struct brcmf_fil_bss_enable_le bss_enable; |
| 5137 |
u16 chanspec = chandef_to_chanspec(&cfg->d11inf, &settings->chandef); |
| 5138 |
bool mbss; |
| 5139 |
int is_11d; |
| 5140 |
bool supports_11d; |
| 5141 |
bool closednet; |
| 5142 |
|
| 5143 |
brcmf_dbg(TRACE, "ctrlchn=%d, center=%d, bw=%d, beacon_interval=%d, dtim_period=%d,\n", |
| 5144 |
settings->chandef.chan->hw_value, |
| 5145 |
settings->chandef.center_freq1, settings->chandef.width, |
| 5146 |
settings->beacon_interval, settings->dtim_period); |
| 5147 |
brcmf_dbg(TRACE, "ssid=%s(%zu), auth_type=%d, inactivity_timeout=%d\n", |
| 5148 |
settings->ssid, settings->ssid_len, settings->auth_type, |
| 5149 |
settings->inactivity_timeout); |
| 5150 |
dev_role = ifp->vif->wdev.iftype; |
| 5151 |
mbss = ifp->vif->mbss; |
| 5152 |
|
| 5153 |
/* store current 11d setting */ |
| 5154 |
if (brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_REGULATORY, |
| 5155 |
&ifp->vif->is_11d)) { |
| 5156 |
is_11d = supports_11d = false; |
| 5157 |
} else { |
| 5158 |
country_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, |
| 5159 |
settings->beacon.tail_len, |
| 5160 |
WLAN_EID_COUNTRY); |
| 5161 |
is_11d = country_ie ? 1 : 0; |
| 5162 |
supports_11d = true; |
| 5163 |
} |
| 5164 |
|
| 5165 |
memset(&ssid_le, 0, sizeof(ssid_le)); |
| 5166 |
if (settings->ssid == NULL || settings->ssid_len == 0) { |
| 5167 |
ie_offset = DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_FIXED_LEN; |
| 5168 |
ssid_ie = brcmf_parse_tlvs( |
| 5169 |
(u8 *)&settings->beacon.head[ie_offset], |
| 5170 |
settings->beacon.head_len - ie_offset, |
| 5171 |
WLAN_EID_SSID); |
| 5172 |
if (!ssid_ie || ssid_ie->len > IEEE80211_MAX_SSID_LEN) |
| 5173 |
return -EINVAL; |
| 5174 |
|
| 5175 |
memcpy(ssid_le.SSID, ssid_ie->data, ssid_ie->len); |
| 5176 |
ssid_le.SSID_len = cpu_to_le32(ssid_ie->len); |
| 5177 |
brcmf_dbg(TRACE, "SSID is (%s) in Head\n", ssid_le.SSID); |
| 5178 |
} else { |
| 5179 |
memcpy(ssid_le.SSID, settings->ssid, settings->ssid_len); |
| 5180 |
ssid_le.SSID_len = cpu_to_le32((u32)settings->ssid_len); |
| 5181 |
} |
| 5182 |
|
| 5183 |
if (!mbss) { |
| 5184 |
brcmf_set_mpc(ifp, 0); |
| 5185 |
brcmf_configure_arp_nd_offload(ifp, false); |
| 5186 |
} |
| 5187 |
|
| 5188 |
/* Parameters shared by all radio interfaces */ |
| 5189 |
if (!mbss) { |
| 5190 |
if ((supports_11d) && (is_11d != ifp->vif->is_11d)) { |
| 5191 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY, |
| 5192 |
is_11d); |
| 5193 |
if (err < 0) { |
| 5194 |
bphy_err(drvr, "Regulatory Set Error, %d\n", |
| 5195 |
err); |
| 5196 |
goto exit; |
| 5197 |
} |
| 5198 |
} |
| 5199 |
if (settings->beacon_interval) { |
| 5200 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, |
| 5201 |
settings->beacon_interval); |
| 5202 |
if (err < 0) { |
| 5203 |
bphy_err(drvr, "Beacon Interval Set Error, %d\n", |
| 5204 |
err); |
| 5205 |
goto exit; |
| 5206 |
} |
| 5207 |
} |
| 5208 |
if (settings->dtim_period) { |
| 5209 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_DTIMPRD, |
| 5210 |
settings->dtim_period); |
| 5211 |
if (err < 0) { |
| 5212 |
bphy_err(drvr, "DTIM Interval Set Error, %d\n", |
| 5213 |
err); |
| 5214 |
goto exit; |
| 5215 |
} |
| 5216 |
} |
| 5217 |
|
| 5218 |
if ((dev_role == NL80211_IFTYPE_AP) && |
| 5219 |
((ifp->ifidx == 0) || |
| 5220 |
(!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB) && |
| 5221 |
!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN)))) { |
| 5222 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); |
| 5223 |
if (err < 0) { |
| 5224 |
bphy_err(drvr, "BRCMF_C_DOWN error %d\n", |
| 5225 |
err); |
| 5226 |
goto exit; |
| 5227 |
} |
| 5228 |
brcmf_fil_iovar_int_set(ifp, "apsta", 0); |
| 5229 |
} |
| 5230 |
|
| 5231 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1); |
| 5232 |
if (err < 0) { |
| 5233 |
bphy_err(drvr, "SET INFRA error %d\n", err); |
| 5234 |
goto exit; |
| 5235 |
} |
| 5236 |
} else if (WARN_ON(supports_11d && (is_11d != ifp->vif->is_11d))) { |
| 5237 |
/* Multiple-BSS should use same 11d configuration */ |
| 5238 |
err = -EINVAL; |
| 5239 |
goto exit; |
| 5240 |
} |
| 5241 |
|
| 5242 |
/* Interface specific setup */ |
| 5243 |
if (dev_role == NL80211_IFTYPE_AP) { |
| 5244 |
if ((brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) && (!mbss)) |
| 5245 |
brcmf_fil_iovar_int_set(ifp, "mbss", 1); |
| 5246 |
|
| 5247 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1); |
| 5248 |
if (err < 0) { |
| 5249 |
bphy_err(drvr, "setting AP mode failed %d\n", |
| 5250 |
err); |
| 5251 |
goto exit; |
| 5252 |
} |
| 5253 |
if (!mbss) { |
| 5254 |
/* Firmware 10.x requires setting channel after enabling |
| 5255 |
* AP and before bringing interface up. |
| 5256 |
*/ |
| 5257 |
err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec); |
| 5258 |
if (err < 0) { |
| 5259 |
bphy_err(drvr, "Set Channel failed: chspec=%d, %d\n", |
| 5260 |
chanspec, err); |
| 5261 |
goto exit; |
| 5262 |
} |
| 5263 |
} |
| 5264 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); |
| 5265 |
if (err < 0) { |
| 5266 |
bphy_err(drvr, "BRCMF_C_UP error (%d)\n", err); |
| 5267 |
goto exit; |
| 5268 |
} |
| 5269 |
|
| 5270 |
if (crypto->psk) { |
| 5271 |
brcmf_dbg(INFO, "using PSK offload\n"); |
| 5272 |
profile->use_fwauth |= BIT(BRCMF_PROFILE_FWAUTH_PSK); |
| 5273 |
err = brcmf_set_pmk(ifp, crypto->psk, |
| 5274 |
BRCMF_WSEC_MAX_PSK_LEN); |
| 5275 |
if (err < 0) |
| 5276 |
goto exit; |
| 5277 |
} |
| 5278 |
if (crypto->sae_pwd) { |
| 5279 |
brcmf_dbg(INFO, "using SAE offload\n"); |
| 5280 |
profile->use_fwauth |= BIT(BRCMF_PROFILE_FWAUTH_SAE); |
| 5281 |
err = brcmf_fwvid_set_sae_password(ifp, crypto); |
| 5282 |
if (err < 0) |
| 5283 |
goto exit; |
| 5284 |
} |
| 5285 |
if (profile->use_fwauth == 0) |
| 5286 |
profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE); |
| 5287 |
|
| 5288 |
err = brcmf_parse_configure_security(ifp, settings, |
| 5289 |
NL80211_IFTYPE_AP); |
| 5290 |
if (err < 0) { |
| 5291 |
bphy_err(drvr, "brcmf_parse_configure_security error\n"); |
| 5292 |
goto exit; |
| 5293 |
} |
| 5294 |
|
| 5295 |
/* On DOWN the firmware removes the WEP keys, reconfigure |
| 5296 |
* them if they were set. |
| 5297 |
*/ |
| 5298 |
brcmf_cfg80211_reconfigure_wep(ifp); |
| 5299 |
|
| 5300 |
memset(&join_params, 0, sizeof(join_params)); |
| 5301 |
/* join parameters starts with ssid */ |
| 5302 |
memcpy(&join_params.ssid_le, &ssid_le, sizeof(ssid_le)); |
| 5303 |
/* create softap */ |
| 5304 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, |
| 5305 |
&join_params, sizeof(join_params)); |
| 5306 |
if (err < 0) { |
| 5307 |
bphy_err(drvr, "SET SSID error (%d)\n", err); |
| 5308 |
goto exit; |
| 5309 |
} |
| 5310 |
|
| 5311 |
closednet = |
| 5312 |
(settings->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE); |
| 5313 |
err = brcmf_fil_iovar_int_set(ifp, "closednet", closednet); |
| 5314 |
if (err) { |
| 5315 |
bphy_err(drvr, "%s closednet error (%d)\n", |
| 5316 |
(closednet ? "enabled" : "disabled"), |
| 5317 |
err); |
| 5318 |
goto exit; |
| 5319 |
} |
| 5320 |
|
| 5321 |
brcmf_dbg(TRACE, "AP mode configuration complete\n"); |
| 5322 |
} else if (dev_role == NL80211_IFTYPE_P2P_GO) { |
| 5323 |
err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec); |
| 5324 |
if (err < 0) { |
| 5325 |
bphy_err(drvr, "Set Channel failed: chspec=%d, %d\n", |
| 5326 |
chanspec, err); |
| 5327 |
goto exit; |
| 5328 |
} |
| 5329 |
|
| 5330 |
err = brcmf_parse_configure_security(ifp, settings, |
| 5331 |
NL80211_IFTYPE_P2P_GO); |
| 5332 |
if (err < 0) { |
| 5333 |
brcmf_err("brcmf_parse_configure_security error\n"); |
| 5334 |
goto exit; |
| 5335 |
} |
| 5336 |
|
| 5337 |
err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le, |
| 5338 |
sizeof(ssid_le)); |
| 5339 |
if (err < 0) { |
| 5340 |
bphy_err(drvr, "setting ssid failed %d\n", err); |
| 5341 |
goto exit; |
| 5342 |
} |
| 5343 |
bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx); |
| 5344 |
bss_enable.enable = cpu_to_le32(1); |
| 5345 |
err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, |
| 5346 |
sizeof(bss_enable)); |
| 5347 |
if (err < 0) { |
| 5348 |
bphy_err(drvr, "bss_enable config failed %d\n", err); |
| 5349 |
goto exit; |
| 5350 |
} |
| 5351 |
|
| 5352 |
brcmf_dbg(TRACE, "GO mode configuration complete\n"); |
| 5353 |
} else { |
| 5354 |
WARN_ON(1); |
| 5355 |
} |
| 5356 |
|
| 5357 |
brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); |
| 5358 |
set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); |
| 5359 |
brcmf_net_setcarrier(ifp, true); |
| 5360 |
|
| 5361 |
exit: |
| 5362 |
if ((err) && (!mbss)) { |
| 5363 |
brcmf_set_mpc(ifp, 1); |
| 5364 |
brcmf_configure_arp_nd_offload(ifp, true); |
| 5365 |
} |
| 5366 |
return err; |
| 5367 |
} |
| 5368 |
|
| 5369 |
static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, |
| 5370 |
unsigned int link_id) |
| 5371 |
{ |
| 5372 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5373 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 5374 |
struct brcmf_pub *drvr = cfg->pub; |
| 5375 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 5376 |
s32 err; |
| 5377 |
struct brcmf_fil_bss_enable_le bss_enable; |
| 5378 |
struct brcmf_join_params join_params; |
| 5379 |
|
| 5380 |
brcmf_dbg(TRACE, "Enter\n"); |
| 5381 |
|
| 5382 |
if (ifp->vif->wdev.iftype == NL80211_IFTYPE_AP) { |
| 5383 |
/* Due to most likely deauths outstanding we sleep */ |
| 5384 |
/* first to make sure they get processed by fw. */ |
| 5385 |
msleep(400); |
| 5386 |
|
| 5387 |
if (profile->use_fwauth != BIT(BRCMF_PROFILE_FWAUTH_NONE)) { |
| 5388 |
struct cfg80211_crypto_settings crypto = {}; |
| 5389 |
|
| 5390 |
if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_PSK)) |
| 5391 |
brcmf_set_pmk(ifp, NULL, 0); |
| 5392 |
if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_SAE)) |
| 5393 |
brcmf_fwvid_set_sae_password(ifp, &crypto); |
| 5394 |
profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE); |
| 5395 |
} |
| 5396 |
|
| 5397 |
if (ifp->vif->mbss) { |
| 5398 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); |
| 5399 |
return err; |
| 5400 |
} |
| 5401 |
|
| 5402 |
/* First BSS doesn't get a full reset */ |
| 5403 |
if (ifp->bsscfgidx == 0) |
| 5404 |
brcmf_fil_iovar_int_set(ifp, "closednet", 0); |
| 5405 |
|
| 5406 |
memset(&join_params, 0, sizeof(join_params)); |
| 5407 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, |
| 5408 |
&join_params, sizeof(join_params)); |
| 5409 |
if (err < 0) |
| 5410 |
bphy_err(drvr, "SET SSID error (%d)\n", err); |
| 5411 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); |
| 5412 |
if (err < 0) |
| 5413 |
bphy_err(drvr, "BRCMF_C_DOWN error %d\n", err); |
| 5414 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0); |
| 5415 |
if (err < 0) |
| 5416 |
bphy_err(drvr, "setting AP mode failed %d\n", err); |
| 5417 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) |
| 5418 |
brcmf_fil_iovar_int_set(ifp, "mbss", 0); |
| 5419 |
brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY, |
| 5420 |
ifp->vif->is_11d); |
| 5421 |
/* Bring device back up so it can be used again */ |
| 5422 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); |
| 5423 |
if (err < 0) |
| 5424 |
bphy_err(drvr, "BRCMF_C_UP error %d\n", err); |
| 5425 |
|
| 5426 |
brcmf_vif_clear_mgmt_ies(ifp->vif); |
| 5427 |
} else { |
| 5428 |
bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx); |
| 5429 |
bss_enable.enable = cpu_to_le32(0); |
| 5430 |
err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, |
| 5431 |
sizeof(bss_enable)); |
| 5432 |
if (err < 0) |
| 5433 |
bphy_err(drvr, "bss_enable config failed %d\n", err); |
| 5434 |
} |
| 5435 |
brcmf_set_mpc(ifp, 1); |
| 5436 |
clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); |
| 5437 |
brcmf_configure_arp_nd_offload(ifp, true); |
| 5438 |
brcmf_net_setcarrier(ifp, false); |
| 5439 |
|
| 5440 |
return err; |
| 5441 |
} |
| 5442 |
|
| 5443 |
static s32 |
| 5444 |
brcmf_cfg80211_change_beacon(struct wiphy *wiphy, struct net_device *ndev, |
| 5445 |
struct cfg80211_ap_update *info) |
| 5446 |
{ |
| 5447 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 5448 |
|
| 5449 |
brcmf_dbg(TRACE, "Enter\n"); |
| 5450 |
|
| 5451 |
return brcmf_config_ap_mgmt_ie(ifp->vif, &info->beacon); |
| 5452 |
} |
| 5453 |
|
| 5454 |
static int |
| 5455 |
brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, |
| 5456 |
struct station_del_parameters *params) |
| 5457 |
{ |
| 5458 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5459 |
struct brcmf_pub *drvr = cfg->pub; |
| 5460 |
struct brcmf_scb_val_le scbval; |
| 5461 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 5462 |
s32 err; |
| 5463 |
|
| 5464 |
if (!params->mac) |
| 5465 |
return -EFAULT; |
| 5466 |
|
| 5467 |
brcmf_dbg(TRACE, "Enter %pM\n", params->mac); |
| 5468 |
|
| 5469 |
if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) |
| 5470 |
ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; |
| 5471 |
if (!check_vif_up(ifp->vif)) |
| 5472 |
return -EIO; |
| 5473 |
|
| 5474 |
memcpy(&scbval.ea, params->mac, ETH_ALEN); |
| 5475 |
scbval.val = cpu_to_le32(params->reason_code); |
| 5476 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON, |
| 5477 |
&scbval, sizeof(scbval)); |
| 5478 |
if (err) |
| 5479 |
bphy_err(drvr, "SCB_DEAUTHENTICATE_FOR_REASON failed %d\n", |
| 5480 |
err); |
| 5481 |
|
| 5482 |
brcmf_dbg(TRACE, "Exit\n"); |
| 5483 |
return err; |
| 5484 |
} |
| 5485 |
|
| 5486 |
static int |
| 5487 |
brcmf_cfg80211_change_station(struct wiphy *wiphy, struct net_device *ndev, |
| 5488 |
const u8 *mac, struct station_parameters *params) |
| 5489 |
{ |
| 5490 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5491 |
struct brcmf_pub *drvr = cfg->pub; |
| 5492 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 5493 |
s32 err; |
| 5494 |
|
| 5495 |
brcmf_dbg(TRACE, "Enter, MAC %pM, mask 0x%04x set 0x%04x\n", mac, |
| 5496 |
params->sta_flags_mask, params->sta_flags_set); |
| 5497 |
|
| 5498 |
/* Ignore all 00 MAC */ |
| 5499 |
if (is_zero_ether_addr(mac)) |
| 5500 |
return 0; |
| 5501 |
|
| 5502 |
if (!(params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED))) |
| 5503 |
return 0; |
| 5504 |
|
| 5505 |
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_AUTHORIZED)) |
| 5506 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SCB_AUTHORIZE, |
| 5507 |
(void *)mac, ETH_ALEN); |
| 5508 |
else |
| 5509 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SCB_DEAUTHORIZE, |
| 5510 |
(void *)mac, ETH_ALEN); |
| 5511 |
if (err < 0) |
| 5512 |
bphy_err(drvr, "Setting SCB (de-)authorize failed, %d\n", err); |
| 5513 |
|
| 5514 |
return err; |
| 5515 |
} |
| 5516 |
|
| 5517 |
static void |
| 5518 |
brcmf_cfg80211_update_mgmt_frame_registrations(struct wiphy *wiphy, |
| 5519 |
struct wireless_dev *wdev, |
| 5520 |
struct mgmt_frame_regs *upd) |
| 5521 |
{ |
| 5522 |
struct brcmf_cfg80211_vif *vif; |
| 5523 |
|
| 5524 |
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); |
| 5525 |
|
| 5526 |
vif->mgmt_rx_reg = upd->interface_stypes; |
| 5527 |
} |
| 5528 |
|
| 5529 |
|
| 5530 |
int |
| 5531 |
brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, |
| 5532 |
struct cfg80211_mgmt_tx_params *params, u64 *cookie) |
| 5533 |
{ |
| 5534 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5535 |
struct ieee80211_channel *chan = params->chan; |
| 5536 |
struct brcmf_pub *drvr = cfg->pub; |
| 5537 |
const u8 *buf = params->buf; |
| 5538 |
size_t len = params->len; |
| 5539 |
const struct ieee80211_mgmt *mgmt; |
| 5540 |
struct brcmf_cfg80211_vif *vif; |
| 5541 |
s32 err = 0; |
| 5542 |
s32 ie_offset; |
| 5543 |
s32 ie_len; |
| 5544 |
struct brcmf_fil_action_frame_le *action_frame; |
| 5545 |
struct brcmf_fil_af_params_le *af_params; |
| 5546 |
bool ack; |
| 5547 |
__le32 hw_ch; |
| 5548 |
|
| 5549 |
brcmf_dbg(TRACE, "Enter\n"); |
| 5550 |
|
| 5551 |
*cookie = 0; |
| 5552 |
|
| 5553 |
mgmt = (const struct ieee80211_mgmt *)buf; |
| 5554 |
|
| 5555 |
if (!ieee80211_is_mgmt(mgmt->frame_control)) { |
| 5556 |
bphy_err(drvr, "Driver only allows MGMT packet type\n"); |
| 5557 |
return -EPERM; |
| 5558 |
} |
| 5559 |
|
| 5560 |
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); |
| 5561 |
|
| 5562 |
if (ieee80211_is_probe_resp(mgmt->frame_control)) { |
| 5563 |
/* Right now the only reason to get a probe response */ |
| 5564 |
/* is for p2p listen response or for p2p GO from */ |
| 5565 |
/* wpa_supplicant. Unfortunately the probe is send */ |
| 5566 |
/* on primary ndev, while dongle wants it on the p2p */ |
| 5567 |
/* vif. Since this is only reason for a probe */ |
| 5568 |
/* response to be sent, the vif is taken from cfg. */ |
| 5569 |
/* If ever desired to send proberesp for non p2p */ |
| 5570 |
/* response then data should be checked for */ |
| 5571 |
/* "DIRECT-". Note in future supplicant will take */ |
| 5572 |
/* dedicated p2p wdev to do this and then this 'hack'*/ |
| 5573 |
/* is not needed anymore. */ |
| 5574 |
ie_offset = DOT11_MGMT_HDR_LEN + |
| 5575 |
DOT11_BCN_PRB_FIXED_LEN; |
| 5576 |
ie_len = len - ie_offset; |
| 5577 |
if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) |
| 5578 |
vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; |
| 5579 |
err = brcmf_vif_set_mgmt_ie(vif, |
| 5580 |
BRCMF_VNDR_IE_PRBRSP_FLAG, |
| 5581 |
&buf[ie_offset], |
| 5582 |
ie_len); |
| 5583 |
cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, |
| 5584 |
GFP_KERNEL); |
| 5585 |
} else if (ieee80211_is_action(mgmt->frame_control)) { |
| 5586 |
if (len > BRCMF_FIL_ACTION_FRAME_SIZE + DOT11_MGMT_HDR_LEN) { |
| 5587 |
bphy_err(drvr, "invalid action frame length\n"); |
| 5588 |
err = -EINVAL; |
| 5589 |
goto exit; |
| 5590 |
} |
| 5591 |
af_params = kzalloc_obj(*af_params); |
| 5592 |
if (af_params == NULL) { |
| 5593 |
bphy_err(drvr, "unable to allocate frame\n"); |
| 5594 |
err = -ENOMEM; |
| 5595 |
goto exit; |
| 5596 |
} |
| 5597 |
action_frame = &af_params->action_frame; |
| 5598 |
/* Add the packet Id */ |
| 5599 |
action_frame->packet_id = cpu_to_le32(*cookie); |
| 5600 |
/* Add BSSID */ |
| 5601 |
memcpy(&action_frame->da[0], &mgmt->da[0], ETH_ALEN); |
| 5602 |
memcpy(&af_params->bssid[0], &mgmt->bssid[0], ETH_ALEN); |
| 5603 |
/* Add the length exepted for 802.11 header */ |
| 5604 |
action_frame->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN); |
| 5605 |
/* Add the channel. Use the one specified as parameter if any or |
| 5606 |
* the current one (got from the firmware) otherwise |
| 5607 |
*/ |
| 5608 |
if (chan) { |
| 5609 |
hw_ch = cpu_to_le32(chan->hw_value); |
| 5610 |
} else { |
| 5611 |
err = brcmf_fil_cmd_data_get(vif->ifp, |
| 5612 |
BRCMF_C_GET_CHANNEL, |
| 5613 |
&hw_ch, sizeof(hw_ch)); |
| 5614 |
if (err) { |
| 5615 |
bphy_err(drvr, |
| 5616 |
"unable to get current hw channel\n"); |
| 5617 |
goto free; |
| 5618 |
} |
| 5619 |
} |
| 5620 |
af_params->channel = hw_ch; |
| 5621 |
|
| 5622 |
af_params->dwell_time = cpu_to_le32(params->wait); |
| 5623 |
memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], |
| 5624 |
le16_to_cpu(action_frame->len)); |
| 5625 |
|
| 5626 |
brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, channel=%d\n", |
| 5627 |
*cookie, le16_to_cpu(action_frame->len), |
| 5628 |
le32_to_cpu(af_params->channel)); |
| 5629 |
|
| 5630 |
ack = brcmf_p2p_send_action_frame(vif->ifp, af_params); |
| 5631 |
|
| 5632 |
cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, ack, |
| 5633 |
GFP_KERNEL); |
| 5634 |
free: |
| 5635 |
kfree(af_params); |
| 5636 |
} else { |
| 5637 |
brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control); |
| 5638 |
brcmf_dbg_hex_dump(true, buf, len, "payload, len=%zu\n", len); |
| 5639 |
} |
| 5640 |
|
| 5641 |
exit: |
| 5642 |
return err; |
| 5643 |
} |
| 5644 |
BRCMF_EXPORT_SYMBOL_GPL(brcmf_cfg80211_mgmt_tx); |
| 5645 |
|
| 5646 |
static int brcmf_cfg80211_set_cqm_rssi_range_config(struct wiphy *wiphy, |
| 5647 |
struct net_device *ndev, |
| 5648 |
s32 rssi_low, s32 rssi_high) |
| 5649 |
{ |
| 5650 |
struct brcmf_cfg80211_vif *vif; |
| 5651 |
struct brcmf_if *ifp; |
| 5652 |
int err = 0; |
| 5653 |
|
| 5654 |
brcmf_dbg(TRACE, "low=%d high=%d", rssi_low, rssi_high); |
| 5655 |
|
| 5656 |
ifp = netdev_priv(ndev); |
| 5657 |
vif = ifp->vif; |
| 5658 |
|
| 5659 |
if (rssi_low != vif->cqm_rssi_low || rssi_high != vif->cqm_rssi_high) { |
| 5660 |
/* The firmware will send an event when the RSSI is less than or |
| 5661 |
* equal to a configured level and the previous RSSI event was |
| 5662 |
* less than or equal to a different level. Set a third level |
| 5663 |
* so that we also detect the transition from rssi <= rssi_high |
| 5664 |
* to rssi > rssi_high. |
| 5665 |
*/ |
| 5666 |
struct brcmf_rssi_event_le config = { |
| 5667 |
.rate_limit_msec = cpu_to_le32(0), |
| 5668 |
.rssi_level_num = 3, |
| 5669 |
.rssi_levels = { |
| 5670 |
clamp_val(rssi_low, S8_MIN, S8_MAX - 2), |
| 5671 |
clamp_val(rssi_high, S8_MIN + 1, S8_MAX - 1), |
| 5672 |
S8_MAX, |
| 5673 |
}, |
| 5674 |
}; |
| 5675 |
|
| 5676 |
err = brcmf_fil_iovar_data_set(ifp, "rssi_event", &config, |
| 5677 |
sizeof(config)); |
| 5678 |
if (err) { |
| 5679 |
err = -EINVAL; |
| 5680 |
} else { |
| 5681 |
vif->cqm_rssi_low = rssi_low; |
| 5682 |
vif->cqm_rssi_high = rssi_high; |
| 5683 |
} |
| 5684 |
} |
| 5685 |
|
| 5686 |
return err; |
| 5687 |
} |
| 5688 |
|
| 5689 |
static int |
| 5690 |
brcmf_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy, |
| 5691 |
struct wireless_dev *wdev, |
| 5692 |
u64 cookie) |
| 5693 |
{ |
| 5694 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5695 |
struct brcmf_pub *drvr = cfg->pub; |
| 5696 |
struct brcmf_cfg80211_vif *vif; |
| 5697 |
int err = 0; |
| 5698 |
|
| 5699 |
brcmf_dbg(TRACE, "Enter p2p listen cancel\n"); |
| 5700 |
|
| 5701 |
vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; |
| 5702 |
if (vif == NULL) { |
| 5703 |
bphy_err(drvr, "No p2p device available for probe response\n"); |
| 5704 |
err = -ENODEV; |
| 5705 |
goto exit; |
| 5706 |
} |
| 5707 |
brcmf_p2p_cancel_remain_on_channel(vif->ifp); |
| 5708 |
exit: |
| 5709 |
return err; |
| 5710 |
} |
| 5711 |
|
| 5712 |
static int brcmf_cfg80211_get_channel(struct wiphy *wiphy, |
| 5713 |
struct wireless_dev *wdev, |
| 5714 |
unsigned int link_id, |
| 5715 |
struct cfg80211_chan_def *chandef) |
| 5716 |
{ |
| 5717 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5718 |
struct net_device *ndev = wdev->netdev; |
| 5719 |
struct brcmf_pub *drvr = cfg->pub; |
| 5720 |
struct brcmu_chan ch; |
| 5721 |
enum nl80211_band band = 0; |
| 5722 |
enum nl80211_chan_width width = 0; |
| 5723 |
u32 chanspec; |
| 5724 |
int freq, err; |
| 5725 |
|
| 5726 |
if (!ndev || drvr->bus_if->state != BRCMF_BUS_UP) |
| 5727 |
return -ENODEV; |
| 5728 |
|
| 5729 |
err = brcmf_fil_iovar_int_get(netdev_priv(ndev), "chanspec", &chanspec); |
| 5730 |
if (err) { |
| 5731 |
bphy_err(drvr, "chanspec failed (%d)\n", err); |
| 5732 |
return err; |
| 5733 |
} |
| 5734 |
|
| 5735 |
ch.chspec = chanspec; |
| 5736 |
cfg->d11inf.decchspec(&ch); |
| 5737 |
|
| 5738 |
switch (ch.band) { |
| 5739 |
case BRCMU_CHAN_BAND_2G: |
| 5740 |
band = NL80211_BAND_2GHZ; |
| 5741 |
break; |
| 5742 |
case BRCMU_CHAN_BAND_5G: |
| 5743 |
band = NL80211_BAND_5GHZ; |
| 5744 |
break; |
| 5745 |
} |
| 5746 |
|
| 5747 |
switch (ch.bw) { |
| 5748 |
case BRCMU_CHAN_BW_80: |
| 5749 |
width = NL80211_CHAN_WIDTH_80; |
| 5750 |
break; |
| 5751 |
case BRCMU_CHAN_BW_40: |
| 5752 |
width = NL80211_CHAN_WIDTH_40; |
| 5753 |
break; |
| 5754 |
case BRCMU_CHAN_BW_20: |
| 5755 |
width = NL80211_CHAN_WIDTH_20; |
| 5756 |
break; |
| 5757 |
case BRCMU_CHAN_BW_80P80: |
| 5758 |
width = NL80211_CHAN_WIDTH_80P80; |
| 5759 |
break; |
| 5760 |
case BRCMU_CHAN_BW_160: |
| 5761 |
width = NL80211_CHAN_WIDTH_160; |
| 5762 |
break; |
| 5763 |
} |
| 5764 |
|
| 5765 |
freq = ieee80211_channel_to_frequency(ch.control_ch_num, band); |
| 5766 |
chandef->chan = ieee80211_get_channel(wiphy, freq); |
| 5767 |
chandef->width = width; |
| 5768 |
chandef->center_freq1 = ieee80211_channel_to_frequency(ch.chnum, band); |
| 5769 |
chandef->center_freq2 = 0; |
| 5770 |
|
| 5771 |
return 0; |
| 5772 |
} |
| 5773 |
|
| 5774 |
static int brcmf_cfg80211_crit_proto_start(struct wiphy *wiphy, |
| 5775 |
struct wireless_dev *wdev, |
| 5776 |
enum nl80211_crit_proto_id proto, |
| 5777 |
u16 duration) |
| 5778 |
{ |
| 5779 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5780 |
struct brcmf_cfg80211_vif *vif; |
| 5781 |
|
| 5782 |
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); |
| 5783 |
|
| 5784 |
/* only DHCP support for now */ |
| 5785 |
if (proto != NL80211_CRIT_PROTO_DHCP) |
| 5786 |
return -EINVAL; |
| 5787 |
|
| 5788 |
/* suppress and abort scanning */ |
| 5789 |
set_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status); |
| 5790 |
brcmf_abort_scanning(cfg); |
| 5791 |
|
| 5792 |
return brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_DISABLED, duration); |
| 5793 |
} |
| 5794 |
|
| 5795 |
static void brcmf_cfg80211_crit_proto_stop(struct wiphy *wiphy, |
| 5796 |
struct wireless_dev *wdev) |
| 5797 |
{ |
| 5798 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5799 |
struct brcmf_cfg80211_vif *vif; |
| 5800 |
|
| 5801 |
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); |
| 5802 |
|
| 5803 |
brcmf_btcoex_set_mode(vif, BRCMF_BTCOEX_ENABLED, 0); |
| 5804 |
clear_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status); |
| 5805 |
} |
| 5806 |
|
| 5807 |
static s32 |
| 5808 |
brcmf_notify_tdls_peer_event(struct brcmf_if *ifp, |
| 5809 |
const struct brcmf_event_msg *e, void *data) |
| 5810 |
{ |
| 5811 |
switch (e->reason) { |
| 5812 |
case BRCMF_E_REASON_TDLS_PEER_DISCOVERED: |
| 5813 |
brcmf_dbg(TRACE, "TDLS Peer Discovered\n"); |
| 5814 |
break; |
| 5815 |
case BRCMF_E_REASON_TDLS_PEER_CONNECTED: |
| 5816 |
brcmf_dbg(TRACE, "TDLS Peer Connected\n"); |
| 5817 |
brcmf_proto_add_tdls_peer(ifp->drvr, ifp->ifidx, (u8 *)e->addr); |
| 5818 |
break; |
| 5819 |
case BRCMF_E_REASON_TDLS_PEER_DISCONNECTED: |
| 5820 |
brcmf_dbg(TRACE, "TDLS Peer Disconnected\n"); |
| 5821 |
brcmf_proto_delete_peer(ifp->drvr, ifp->ifidx, (u8 *)e->addr); |
| 5822 |
break; |
| 5823 |
} |
| 5824 |
|
| 5825 |
return 0; |
| 5826 |
} |
| 5827 |
|
| 5828 |
static int brcmf_convert_nl80211_tdls_oper(enum nl80211_tdls_operation oper) |
| 5829 |
{ |
| 5830 |
int ret; |
| 5831 |
|
| 5832 |
switch (oper) { |
| 5833 |
case NL80211_TDLS_DISCOVERY_REQ: |
| 5834 |
ret = BRCMF_TDLS_MANUAL_EP_DISCOVERY; |
| 5835 |
break; |
| 5836 |
case NL80211_TDLS_SETUP: |
| 5837 |
ret = BRCMF_TDLS_MANUAL_EP_CREATE; |
| 5838 |
break; |
| 5839 |
case NL80211_TDLS_TEARDOWN: |
| 5840 |
ret = BRCMF_TDLS_MANUAL_EP_DELETE; |
| 5841 |
break; |
| 5842 |
default: |
| 5843 |
brcmf_err("unsupported operation: %d\n", oper); |
| 5844 |
ret = -EOPNOTSUPP; |
| 5845 |
} |
| 5846 |
return ret; |
| 5847 |
} |
| 5848 |
|
| 5849 |
static int brcmf_cfg80211_tdls_oper(struct wiphy *wiphy, |
| 5850 |
struct net_device *ndev, const u8 *peer, |
| 5851 |
enum nl80211_tdls_operation oper) |
| 5852 |
{ |
| 5853 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5854 |
struct brcmf_pub *drvr = cfg->pub; |
| 5855 |
struct brcmf_if *ifp; |
| 5856 |
struct brcmf_tdls_iovar_le info; |
| 5857 |
int ret = 0; |
| 5858 |
|
| 5859 |
ret = brcmf_convert_nl80211_tdls_oper(oper); |
| 5860 |
if (ret < 0) |
| 5861 |
return ret; |
| 5862 |
|
| 5863 |
ifp = netdev_priv(ndev); |
| 5864 |
memset(&info, 0, sizeof(info)); |
| 5865 |
info.mode = (u8)ret; |
| 5866 |
if (peer) |
| 5867 |
memcpy(info.ea, peer, ETH_ALEN); |
| 5868 |
|
| 5869 |
ret = brcmf_fil_iovar_data_set(ifp, "tdls_endpoint", |
| 5870 |
&info, sizeof(info)); |
| 5871 |
if (ret < 0) |
| 5872 |
bphy_err(drvr, "tdls_endpoint iovar failed: ret=%d\n", ret); |
| 5873 |
|
| 5874 |
return ret; |
| 5875 |
} |
| 5876 |
|
| 5877 |
static int |
| 5878 |
brcmf_cfg80211_update_conn_params(struct wiphy *wiphy, |
| 5879 |
struct net_device *ndev, |
| 5880 |
struct cfg80211_connect_params *sme, |
| 5881 |
u32 changed) |
| 5882 |
{ |
| 5883 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5884 |
struct brcmf_pub *drvr = cfg->pub; |
| 5885 |
struct brcmf_if *ifp; |
| 5886 |
int err; |
| 5887 |
|
| 5888 |
if (!(changed & UPDATE_ASSOC_IES)) |
| 5889 |
return 0; |
| 5890 |
|
| 5891 |
ifp = netdev_priv(ndev); |
| 5892 |
err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG, |
| 5893 |
sme->ie, sme->ie_len); |
| 5894 |
if (err) |
| 5895 |
bphy_err(drvr, "Set Assoc REQ IE Failed\n"); |
| 5896 |
else |
| 5897 |
brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n"); |
| 5898 |
|
| 5899 |
return err; |
| 5900 |
} |
| 5901 |
|
| 5902 |
#ifdef CONFIG_PM |
| 5903 |
static int |
| 5904 |
brcmf_cfg80211_set_rekey_data(struct wiphy *wiphy, struct net_device *ndev, |
| 5905 |
struct cfg80211_gtk_rekey_data *gtk) |
| 5906 |
{ |
| 5907 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 5908 |
struct brcmf_pub *drvr = cfg->pub; |
| 5909 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 5910 |
struct brcmf_gtk_keyinfo_le gtk_le; |
| 5911 |
int ret; |
| 5912 |
|
| 5913 |
brcmf_dbg(TRACE, "Enter, bssidx=%d\n", ifp->bsscfgidx); |
| 5914 |
|
| 5915 |
memcpy(gtk_le.kck, gtk->kck, sizeof(gtk_le.kck)); |
| 5916 |
memcpy(gtk_le.kek, gtk->kek, sizeof(gtk_le.kek)); |
| 5917 |
memcpy(gtk_le.replay_counter, gtk->replay_ctr, |
| 5918 |
sizeof(gtk_le.replay_counter)); |
| 5919 |
|
| 5920 |
ret = brcmf_fil_iovar_data_set(ifp, "gtk_key_info", >k_le, |
| 5921 |
sizeof(gtk_le)); |
| 5922 |
if (ret < 0) |
| 5923 |
bphy_err(drvr, "gtk_key_info iovar failed: ret=%d\n", ret); |
| 5924 |
|
| 5925 |
return ret; |
| 5926 |
} |
| 5927 |
#endif |
| 5928 |
|
| 5929 |
static int brcmf_cfg80211_set_pmk(struct wiphy *wiphy, struct net_device *dev, |
| 5930 |
const struct cfg80211_pmk_conf *conf) |
| 5931 |
{ |
| 5932 |
struct brcmf_if *ifp; |
| 5933 |
|
| 5934 |
brcmf_dbg(TRACE, "enter\n"); |
| 5935 |
|
| 5936 |
/* expect using firmware supplicant for 1X */ |
| 5937 |
ifp = netdev_priv(dev); |
| 5938 |
if (WARN_ON(ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X)) |
| 5939 |
return -EINVAL; |
| 5940 |
|
| 5941 |
if (conf->pmk_len > BRCMF_WSEC_MAX_PSK_LEN) |
| 5942 |
return -ERANGE; |
| 5943 |
|
| 5944 |
return brcmf_set_pmk(ifp, conf->pmk, conf->pmk_len); |
| 5945 |
} |
| 5946 |
|
| 5947 |
static int brcmf_cfg80211_del_pmk(struct wiphy *wiphy, struct net_device *dev, |
| 5948 |
const u8 *aa) |
| 5949 |
{ |
| 5950 |
struct brcmf_if *ifp; |
| 5951 |
|
| 5952 |
brcmf_dbg(TRACE, "enter\n"); |
| 5953 |
ifp = netdev_priv(dev); |
| 5954 |
if (WARN_ON(ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X)) |
| 5955 |
return -EINVAL; |
| 5956 |
|
| 5957 |
return brcmf_set_pmk(ifp, NULL, 0); |
| 5958 |
} |
| 5959 |
|
| 5960 |
static int brcmf_cfg80211_change_bss(struct wiphy *wiphy, struct net_device *dev, |
| 5961 |
struct bss_parameters *params) |
| 5962 |
{ |
| 5963 |
struct brcmf_if *ifp = netdev_priv(dev); |
| 5964 |
int ret = 0; |
| 5965 |
|
| 5966 |
/* In AP mode, the "ap_isolate" value represents |
| 5967 |
* 0 = allow low-level bridging of frames between associated stations |
| 5968 |
* 1 = restrict low-level bridging of frames to isolate associated stations |
| 5969 |
* -1 = do not change existing setting |
| 5970 |
*/ |
| 5971 |
if (params->ap_isolate >= 0) { |
| 5972 |
ret = brcmf_fil_iovar_int_set(ifp, "ap_isolate", params->ap_isolate); |
| 5973 |
if (ret < 0) |
| 5974 |
brcmf_err("ap_isolate iovar failed: ret=%d\n", ret); |
| 5975 |
} |
| 5976 |
|
| 5977 |
return ret; |
| 5978 |
} |
| 5979 |
|
| 5980 |
static struct cfg80211_ops brcmf_cfg80211_ops = { |
| 5981 |
.add_virtual_intf = brcmf_cfg80211_add_iface, |
| 5982 |
.del_virtual_intf = brcmf_cfg80211_del_iface, |
| 5983 |
.change_virtual_intf = brcmf_cfg80211_change_iface, |
| 5984 |
.scan = brcmf_cfg80211_scan, |
| 5985 |
.set_wiphy_params = brcmf_cfg80211_set_wiphy_params, |
| 5986 |
.join_ibss = brcmf_cfg80211_join_ibss, |
| 5987 |
.leave_ibss = brcmf_cfg80211_leave_ibss, |
| 5988 |
.get_station = brcmf_cfg80211_get_station, |
| 5989 |
.dump_station = brcmf_cfg80211_dump_station, |
| 5990 |
.set_tx_power = brcmf_cfg80211_set_tx_power, |
| 5991 |
.get_tx_power = brcmf_cfg80211_get_tx_power, |
| 5992 |
.add_key = brcmf_cfg80211_add_key, |
| 5993 |
.del_key = brcmf_cfg80211_del_key, |
| 5994 |
.get_key = brcmf_cfg80211_get_key, |
| 5995 |
.set_default_key = brcmf_cfg80211_config_default_key, |
| 5996 |
.set_default_mgmt_key = brcmf_cfg80211_config_default_mgmt_key, |
| 5997 |
.set_power_mgmt = brcmf_cfg80211_set_power_mgmt, |
| 5998 |
.connect = brcmf_cfg80211_connect, |
| 5999 |
.disconnect = brcmf_cfg80211_disconnect, |
| 6000 |
.suspend = brcmf_cfg80211_suspend, |
| 6001 |
.resume = brcmf_cfg80211_resume, |
| 6002 |
.set_pmksa = brcmf_cfg80211_set_pmksa, |
| 6003 |
.del_pmksa = brcmf_cfg80211_del_pmksa, |
| 6004 |
.flush_pmksa = brcmf_cfg80211_flush_pmksa, |
| 6005 |
.start_ap = brcmf_cfg80211_start_ap, |
| 6006 |
.stop_ap = brcmf_cfg80211_stop_ap, |
| 6007 |
.change_beacon = brcmf_cfg80211_change_beacon, |
| 6008 |
.del_station = brcmf_cfg80211_del_station, |
| 6009 |
.change_station = brcmf_cfg80211_change_station, |
| 6010 |
.sched_scan_start = brcmf_cfg80211_sched_scan_start, |
| 6011 |
.sched_scan_stop = brcmf_cfg80211_sched_scan_stop, |
| 6012 |
.update_mgmt_frame_registrations = |
| 6013 |
brcmf_cfg80211_update_mgmt_frame_registrations, |
| 6014 |
.mgmt_tx = brcmf_cfg80211_mgmt_tx, |
| 6015 |
.set_cqm_rssi_range_config = brcmf_cfg80211_set_cqm_rssi_range_config, |
| 6016 |
.remain_on_channel = brcmf_p2p_remain_on_channel, |
| 6017 |
.cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel, |
| 6018 |
.get_channel = brcmf_cfg80211_get_channel, |
| 6019 |
.start_p2p_device = brcmf_p2p_start_device, |
| 6020 |
.stop_p2p_device = brcmf_p2p_stop_device, |
| 6021 |
.crit_proto_start = brcmf_cfg80211_crit_proto_start, |
| 6022 |
.crit_proto_stop = brcmf_cfg80211_crit_proto_stop, |
| 6023 |
.tdls_oper = brcmf_cfg80211_tdls_oper, |
| 6024 |
.update_connect_params = brcmf_cfg80211_update_conn_params, |
| 6025 |
.set_pmk = brcmf_cfg80211_set_pmk, |
| 6026 |
.del_pmk = brcmf_cfg80211_del_pmk, |
| 6027 |
.change_bss = brcmf_cfg80211_change_bss, |
| 6028 |
}; |
| 6029 |
|
| 6030 |
struct cfg80211_ops *brcmf_cfg80211_get_ops(struct brcmf_mp_device *settings) |
| 6031 |
{ |
| 6032 |
struct cfg80211_ops *ops; |
| 6033 |
|
| 6034 |
ops = kmemdup(&brcmf_cfg80211_ops, sizeof(brcmf_cfg80211_ops), |
| 6035 |
GFP_KERNEL); |
| 6036 |
|
| 6037 |
if (ops && settings->roamoff) |
| 6038 |
ops->update_connect_params = NULL; |
| 6039 |
|
| 6040 |
return ops; |
| 6041 |
} |
| 6042 |
|
| 6043 |
struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, |
| 6044 |
enum nl80211_iftype type) |
| 6045 |
{ |
| 6046 |
struct brcmf_cfg80211_vif *vif_walk; |
| 6047 |
struct brcmf_cfg80211_vif *vif; |
| 6048 |
bool mbss; |
| 6049 |
struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0); |
| 6050 |
|
| 6051 |
brcmf_dbg(TRACE, "allocating virtual interface (size=%zu)\n", |
| 6052 |
sizeof(*vif)); |
| 6053 |
vif = kzalloc_obj(*vif); |
| 6054 |
if (!vif) |
| 6055 |
return ERR_PTR(-ENOMEM); |
| 6056 |
|
| 6057 |
vif->wdev.wiphy = cfg->wiphy; |
| 6058 |
vif->wdev.iftype = type; |
| 6059 |
init_completion(&vif->mgmt_tx); |
| 6060 |
|
| 6061 |
brcmf_init_prof(&vif->profile); |
| 6062 |
|
| 6063 |
if (type == NL80211_IFTYPE_AP && |
| 6064 |
brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) { |
| 6065 |
mbss = false; |
| 6066 |
list_for_each_entry(vif_walk, &cfg->vif_list, list) { |
| 6067 |
if (vif_walk->wdev.iftype == NL80211_IFTYPE_AP) { |
| 6068 |
mbss = true; |
| 6069 |
break; |
| 6070 |
} |
| 6071 |
} |
| 6072 |
vif->mbss = mbss; |
| 6073 |
} |
| 6074 |
|
| 6075 |
list_add_tail(&vif->list, &cfg->vif_list); |
| 6076 |
return vif; |
| 6077 |
} |
| 6078 |
|
| 6079 |
void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) |
| 6080 |
{ |
| 6081 |
list_del(&vif->list); |
| 6082 |
kfree(vif); |
| 6083 |
} |
| 6084 |
|
| 6085 |
void brcmf_cfg80211_free_vif(struct net_device *ndev) |
| 6086 |
{ |
| 6087 |
struct brcmf_cfg80211_vif *vif; |
| 6088 |
struct brcmf_if *ifp; |
| 6089 |
|
| 6090 |
ifp = netdev_priv(ndev); |
| 6091 |
vif = ifp->vif; |
| 6092 |
|
| 6093 |
if (vif) |
| 6094 |
brcmf_free_vif(vif); |
| 6095 |
} |
| 6096 |
|
| 6097 |
static bool brcmf_is_linkup(struct brcmf_cfg80211_vif *vif, |
| 6098 |
const struct brcmf_event_msg *e) |
| 6099 |
{ |
| 6100 |
u32 event = e->event_code; |
| 6101 |
u32 status = e->status; |
| 6102 |
|
| 6103 |
if ((vif->profile.use_fwsup == BRCMF_PROFILE_FWSUP_PSK || |
| 6104 |
vif->profile.use_fwsup == BRCMF_PROFILE_FWSUP_SAE) && |
| 6105 |
event == BRCMF_E_PSK_SUP && |
| 6106 |
status == BRCMF_E_STATUS_FWSUP_COMPLETED) |
| 6107 |
set_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state); |
| 6108 |
if (event == BRCMF_E_SET_SSID && status == BRCMF_E_STATUS_SUCCESS) { |
| 6109 |
brcmf_dbg(CONN, "Processing set ssid\n"); |
| 6110 |
memcpy(vif->profile.bssid, e->addr, ETH_ALEN); |
| 6111 |
if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK && |
| 6112 |
vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_SAE) |
| 6113 |
return true; |
| 6114 |
|
| 6115 |
set_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state); |
| 6116 |
} |
| 6117 |
|
| 6118 |
if (test_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state) && |
| 6119 |
test_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state)) { |
| 6120 |
clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state); |
| 6121 |
clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state); |
| 6122 |
return true; |
| 6123 |
} |
| 6124 |
return false; |
| 6125 |
} |
| 6126 |
|
| 6127 |
static bool brcmf_is_linkdown(struct brcmf_cfg80211_vif *vif, |
| 6128 |
const struct brcmf_event_msg *e) |
| 6129 |
{ |
| 6130 |
u32 event = e->event_code; |
| 6131 |
u16 flags = e->flags; |
| 6132 |
|
| 6133 |
if ((event == BRCMF_E_DEAUTH) || (event == BRCMF_E_DEAUTH_IND) || |
| 6134 |
(event == BRCMF_E_DISASSOC_IND) || |
| 6135 |
((event == BRCMF_E_LINK) && (!(flags & BRCMF_EVENT_MSG_LINK)))) { |
| 6136 |
brcmf_dbg(CONN, "Processing link down\n"); |
| 6137 |
clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state); |
| 6138 |
clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state); |
| 6139 |
return true; |
| 6140 |
} |
| 6141 |
return false; |
| 6142 |
} |
| 6143 |
|
| 6144 |
static bool brcmf_is_nonetwork(struct brcmf_cfg80211_info *cfg, |
| 6145 |
const struct brcmf_event_msg *e) |
| 6146 |
{ |
| 6147 |
u32 event = e->event_code; |
| 6148 |
u32 status = e->status; |
| 6149 |
|
| 6150 |
if (event == BRCMF_E_LINK && status == BRCMF_E_STATUS_NO_NETWORKS) { |
| 6151 |
brcmf_dbg(CONN, "Processing Link %s & no network found\n", |
| 6152 |
e->flags & BRCMF_EVENT_MSG_LINK ? "up" : "down"); |
| 6153 |
return true; |
| 6154 |
} |
| 6155 |
|
| 6156 |
if (event == BRCMF_E_SET_SSID && status != BRCMF_E_STATUS_SUCCESS) { |
| 6157 |
brcmf_dbg(CONN, "Processing connecting & no network found\n"); |
| 6158 |
return true; |
| 6159 |
} |
| 6160 |
|
| 6161 |
if (event == BRCMF_E_PSK_SUP && |
| 6162 |
status != BRCMF_E_STATUS_FWSUP_COMPLETED) { |
| 6163 |
brcmf_dbg(CONN, "Processing failed supplicant state: %u\n", |
| 6164 |
status); |
| 6165 |
return true; |
| 6166 |
} |
| 6167 |
|
| 6168 |
return false; |
| 6169 |
} |
| 6170 |
|
| 6171 |
static void brcmf_clear_assoc_ies(struct brcmf_cfg80211_info *cfg) |
| 6172 |
{ |
| 6173 |
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); |
| 6174 |
|
| 6175 |
kfree(conn_info->req_ie); |
| 6176 |
conn_info->req_ie = NULL; |
| 6177 |
conn_info->req_ie_len = 0; |
| 6178 |
kfree(conn_info->resp_ie); |
| 6179 |
conn_info->resp_ie = NULL; |
| 6180 |
conn_info->resp_ie_len = 0; |
| 6181 |
} |
| 6182 |
|
| 6183 |
u8 brcmf_map_prio_to_prec(void *config, u8 prio) |
| 6184 |
{ |
| 6185 |
struct brcmf_cfg80211_info *cfg = (struct brcmf_cfg80211_info *)config; |
| 6186 |
|
| 6187 |
if (!cfg) |
| 6188 |
return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ? |
| 6189 |
(prio ^ 2) : prio; |
| 6190 |
|
| 6191 |
/* For those AC(s) with ACM flag set to 1, convert its 4-level priority |
| 6192 |
* to an 8-level precedence which is the same as BE's |
| 6193 |
*/ |
| 6194 |
if (prio > PRIO_8021D_EE && |
| 6195 |
cfg->ac_priority[prio] == cfg->ac_priority[PRIO_8021D_BE]) |
| 6196 |
return cfg->ac_priority[prio] * 2; |
| 6197 |
|
| 6198 |
/* Conversion of 4-level priority to 8-level precedence */ |
| 6199 |
if (prio == PRIO_8021D_BE || prio == PRIO_8021D_BK || |
| 6200 |
prio == PRIO_8021D_CL || prio == PRIO_8021D_VO) |
| 6201 |
return cfg->ac_priority[prio] * 2; |
| 6202 |
else |
| 6203 |
return cfg->ac_priority[prio] * 2 + 1; |
| 6204 |
} |
| 6205 |
|
| 6206 |
u8 brcmf_map_prio_to_aci(void *config, u8 prio) |
| 6207 |
{ |
| 6208 |
/* Prio here refers to the 802.1d priority in range of 0 to 7. |
| 6209 |
* ACI here refers to the WLAN AC Index in range of 0 to 3. |
| 6210 |
* This function will return ACI corresponding to input prio. |
| 6211 |
*/ |
| 6212 |
struct brcmf_cfg80211_info *cfg = (struct brcmf_cfg80211_info *)config; |
| 6213 |
|
| 6214 |
if (cfg) |
| 6215 |
return cfg->ac_priority[prio]; |
| 6216 |
|
| 6217 |
return prio; |
| 6218 |
} |
| 6219 |
|
| 6220 |
static void brcmf_init_wmm_prio(u8 *priority) |
| 6221 |
{ |
| 6222 |
/* Initialize AC priority array to default |
| 6223 |
* 802.1d priority as per following table: |
| 6224 |
* 802.1d prio 0,3 maps to BE |
| 6225 |
* 802.1d prio 1,2 maps to BK |
| 6226 |
* 802.1d prio 4,5 maps to VI |
| 6227 |
* 802.1d prio 6,7 maps to VO |
| 6228 |
*/ |
| 6229 |
priority[0] = BRCMF_FWS_FIFO_AC_BE; |
| 6230 |
priority[3] = BRCMF_FWS_FIFO_AC_BE; |
| 6231 |
priority[1] = BRCMF_FWS_FIFO_AC_BK; |
| 6232 |
priority[2] = BRCMF_FWS_FIFO_AC_BK; |
| 6233 |
priority[4] = BRCMF_FWS_FIFO_AC_VI; |
| 6234 |
priority[5] = BRCMF_FWS_FIFO_AC_VI; |
| 6235 |
priority[6] = BRCMF_FWS_FIFO_AC_VO; |
| 6236 |
priority[7] = BRCMF_FWS_FIFO_AC_VO; |
| 6237 |
} |
| 6238 |
|
| 6239 |
static void brcmf_wifi_prioritize_acparams(const |
| 6240 |
struct brcmf_cfg80211_edcf_acparam *acp, u8 *priority) |
| 6241 |
{ |
| 6242 |
u8 aci; |
| 6243 |
u8 aifsn; |
| 6244 |
u8 ecwmin; |
| 6245 |
u8 ecwmax; |
| 6246 |
u8 acm; |
| 6247 |
u8 ranking_basis[EDCF_AC_COUNT]; |
| 6248 |
u8 aci_prio[EDCF_AC_COUNT]; /* AC_BE, AC_BK, AC_VI, AC_VO */ |
| 6249 |
u8 index; |
| 6250 |
|
| 6251 |
for (aci = 0; aci < EDCF_AC_COUNT; aci++, acp++) { |
| 6252 |
aifsn = acp->ACI & EDCF_AIFSN_MASK; |
| 6253 |
acm = (acp->ACI & EDCF_ACM_MASK) ? 1 : 0; |
| 6254 |
ecwmin = acp->ECW & EDCF_ECWMIN_MASK; |
| 6255 |
ecwmax = (acp->ECW & EDCF_ECWMAX_MASK) >> EDCF_ECWMAX_SHIFT; |
| 6256 |
brcmf_dbg(CONN, "ACI %d aifsn %d acm %d ecwmin %d ecwmax %d\n", |
| 6257 |
aci, aifsn, acm, ecwmin, ecwmax); |
| 6258 |
/* Default AC_VO will be the lowest ranking value */ |
| 6259 |
ranking_basis[aci] = aifsn + ecwmin + ecwmax; |
| 6260 |
/* Initialise priority starting at 0 (AC_BE) */ |
| 6261 |
aci_prio[aci] = 0; |
| 6262 |
|
| 6263 |
/* If ACM is set, STA can't use this AC as per 802.11. |
| 6264 |
* Change the ranking to BE |
| 6265 |
*/ |
| 6266 |
if (aci != AC_BE && aci != AC_BK && acm == 1) |
| 6267 |
ranking_basis[aci] = ranking_basis[AC_BE]; |
| 6268 |
} |
| 6269 |
|
| 6270 |
/* Ranking method which works for AC priority |
| 6271 |
* swapping when values for cwmin, cwmax and aifsn are varied |
| 6272 |
* Compare each aci_prio against each other aci_prio |
| 6273 |
*/ |
| 6274 |
for (aci = 0; aci < EDCF_AC_COUNT; aci++) { |
| 6275 |
for (index = 0; index < EDCF_AC_COUNT; index++) { |
| 6276 |
if (index != aci) { |
| 6277 |
/* Smaller ranking value has higher priority, |
| 6278 |
* so increment priority for each ACI which has |
| 6279 |
* a higher ranking value |
| 6280 |
*/ |
| 6281 |
if (ranking_basis[aci] < ranking_basis[index]) |
| 6282 |
aci_prio[aci]++; |
| 6283 |
} |
| 6284 |
} |
| 6285 |
} |
| 6286 |
|
| 6287 |
/* By now, aci_prio[] will be in range of 0 to 3. |
| 6288 |
* Use ACI prio to get the new priority value for |
| 6289 |
* each 802.1d traffic type, in this range. |
| 6290 |
*/ |
| 6291 |
if (!(aci_prio[AC_BE] == aci_prio[AC_BK] && |
| 6292 |
aci_prio[AC_BK] == aci_prio[AC_VI] && |
| 6293 |
aci_prio[AC_VI] == aci_prio[AC_VO])) { |
| 6294 |
/* 802.1d 0,3 maps to BE */ |
| 6295 |
priority[0] = aci_prio[AC_BE]; |
| 6296 |
priority[3] = aci_prio[AC_BE]; |
| 6297 |
|
| 6298 |
/* 802.1d 1,2 maps to BK */ |
| 6299 |
priority[1] = aci_prio[AC_BK]; |
| 6300 |
priority[2] = aci_prio[AC_BK]; |
| 6301 |
|
| 6302 |
/* 802.1d 4,5 maps to VO */ |
| 6303 |
priority[4] = aci_prio[AC_VI]; |
| 6304 |
priority[5] = aci_prio[AC_VI]; |
| 6305 |
|
| 6306 |
/* 802.1d 6,7 maps to VO */ |
| 6307 |
priority[6] = aci_prio[AC_VO]; |
| 6308 |
priority[7] = aci_prio[AC_VO]; |
| 6309 |
} else { |
| 6310 |
/* Initialize to default priority */ |
| 6311 |
brcmf_init_wmm_prio(priority); |
| 6312 |
} |
| 6313 |
|
| 6314 |
brcmf_dbg(CONN, "Adj prio BE 0->%d, BK 1->%d, BK 2->%d, BE 3->%d\n", |
| 6315 |
priority[0], priority[1], priority[2], priority[3]); |
| 6316 |
|
| 6317 |
brcmf_dbg(CONN, "Adj prio VI 4->%d, VI 5->%d, VO 6->%d, VO 7->%d\n", |
| 6318 |
priority[4], priority[5], priority[6], priority[7]); |
| 6319 |
} |
| 6320 |
|
| 6321 |
static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg, |
| 6322 |
struct brcmf_if *ifp) |
| 6323 |
{ |
| 6324 |
struct brcmf_pub *drvr = cfg->pub; |
| 6325 |
struct brcmf_cfg80211_assoc_ielen_le *assoc_info; |
| 6326 |
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); |
| 6327 |
struct brcmf_cfg80211_edcf_acparam edcf_acparam_info[EDCF_AC_COUNT]; |
| 6328 |
u32 req_len; |
| 6329 |
u32 resp_len; |
| 6330 |
s32 err = 0; |
| 6331 |
|
| 6332 |
brcmf_clear_assoc_ies(cfg); |
| 6333 |
|
| 6334 |
err = brcmf_fil_iovar_data_get(ifp, "assoc_info", |
| 6335 |
cfg->extra_buf, WL_ASSOC_INFO_MAX); |
| 6336 |
if (err) { |
| 6337 |
bphy_err(drvr, "could not get assoc info (%d)\n", err); |
| 6338 |
return err; |
| 6339 |
} |
| 6340 |
assoc_info = |
| 6341 |
(struct brcmf_cfg80211_assoc_ielen_le *)cfg->extra_buf; |
| 6342 |
req_len = le32_to_cpu(assoc_info->req_len); |
| 6343 |
resp_len = le32_to_cpu(assoc_info->resp_len); |
| 6344 |
if (req_len > WL_EXTRA_BUF_MAX || resp_len > WL_EXTRA_BUF_MAX) { |
| 6345 |
bphy_err(drvr, "invalid lengths in assoc info: req %u resp %u\n", |
| 6346 |
req_len, resp_len); |
| 6347 |
return -EINVAL; |
| 6348 |
} |
| 6349 |
if (req_len) { |
| 6350 |
err = brcmf_fil_iovar_data_get(ifp, "assoc_req_ies", |
| 6351 |
cfg->extra_buf, |
| 6352 |
WL_ASSOC_INFO_MAX); |
| 6353 |
if (err) { |
| 6354 |
bphy_err(drvr, "could not get assoc req (%d)\n", err); |
| 6355 |
return err; |
| 6356 |
} |
| 6357 |
conn_info->req_ie_len = req_len; |
| 6358 |
conn_info->req_ie = |
| 6359 |
kmemdup(cfg->extra_buf, conn_info->req_ie_len, |
| 6360 |
GFP_KERNEL); |
| 6361 |
if (!conn_info->req_ie) |
| 6362 |
conn_info->req_ie_len = 0; |
| 6363 |
} else { |
| 6364 |
conn_info->req_ie_len = 0; |
| 6365 |
conn_info->req_ie = NULL; |
| 6366 |
} |
| 6367 |
if (resp_len) { |
| 6368 |
err = brcmf_fil_iovar_data_get(ifp, "assoc_resp_ies", |
| 6369 |
cfg->extra_buf, |
| 6370 |
WL_ASSOC_INFO_MAX); |
| 6371 |
if (err) { |
| 6372 |
bphy_err(drvr, "could not get assoc resp (%d)\n", err); |
| 6373 |
return err; |
| 6374 |
} |
| 6375 |
conn_info->resp_ie_len = resp_len; |
| 6376 |
conn_info->resp_ie = |
| 6377 |
kmemdup(cfg->extra_buf, conn_info->resp_ie_len, |
| 6378 |
GFP_KERNEL); |
| 6379 |
if (!conn_info->resp_ie) |
| 6380 |
conn_info->resp_ie_len = 0; |
| 6381 |
|
| 6382 |
err = brcmf_fil_iovar_data_get(ifp, "wme_ac_sta", |
| 6383 |
edcf_acparam_info, |
| 6384 |
sizeof(edcf_acparam_info)); |
| 6385 |
if (err) { |
| 6386 |
brcmf_err("could not get wme_ac_sta (%d)\n", err); |
| 6387 |
return err; |
| 6388 |
} |
| 6389 |
|
| 6390 |
brcmf_wifi_prioritize_acparams(edcf_acparam_info, |
| 6391 |
cfg->ac_priority); |
| 6392 |
} else { |
| 6393 |
conn_info->resp_ie_len = 0; |
| 6394 |
conn_info->resp_ie = NULL; |
| 6395 |
} |
| 6396 |
brcmf_dbg(CONN, "req len (%d) resp len (%d)\n", |
| 6397 |
conn_info->req_ie_len, conn_info->resp_ie_len); |
| 6398 |
|
| 6399 |
return err; |
| 6400 |
} |
| 6401 |
|
| 6402 |
static s32 |
| 6403 |
brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, |
| 6404 |
struct net_device *ndev, |
| 6405 |
const struct brcmf_event_msg *e) |
| 6406 |
{ |
| 6407 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 6408 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 6409 |
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); |
| 6410 |
struct wiphy *wiphy = cfg_to_wiphy(cfg); |
| 6411 |
struct ieee80211_channel *notify_channel = NULL; |
| 6412 |
struct ieee80211_supported_band *band; |
| 6413 |
struct brcmf_bss_info_le *bi; |
| 6414 |
struct brcmu_chan ch; |
| 6415 |
struct cfg80211_roam_info roam_info = {}; |
| 6416 |
u32 freq; |
| 6417 |
s32 err = 0; |
| 6418 |
u8 *buf; |
| 6419 |
|
| 6420 |
brcmf_dbg(TRACE, "Enter\n"); |
| 6421 |
|
| 6422 |
brcmf_get_assoc_ies(cfg, ifp); |
| 6423 |
memcpy(profile->bssid, e->addr, ETH_ALEN); |
| 6424 |
brcmf_update_bss_info(cfg, ifp); |
| 6425 |
|
| 6426 |
buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); |
| 6427 |
if (buf == NULL) { |
| 6428 |
err = -ENOMEM; |
| 6429 |
goto done; |
| 6430 |
} |
| 6431 |
|
| 6432 |
/* data sent to dongle has to be little endian */ |
| 6433 |
*(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); |
| 6434 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, |
| 6435 |
buf, WL_BSS_INFO_MAX); |
| 6436 |
|
| 6437 |
if (err) |
| 6438 |
goto done; |
| 6439 |
|
| 6440 |
bi = (struct brcmf_bss_info_le *)(buf + 4); |
| 6441 |
ch.chspec = le16_to_cpu(bi->chanspec); |
| 6442 |
cfg->d11inf.decchspec(&ch); |
| 6443 |
|
| 6444 |
if (ch.band == BRCMU_CHAN_BAND_2G) |
| 6445 |
band = wiphy->bands[NL80211_BAND_2GHZ]; |
| 6446 |
else |
| 6447 |
band = wiphy->bands[NL80211_BAND_5GHZ]; |
| 6448 |
|
| 6449 |
freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band); |
| 6450 |
notify_channel = ieee80211_get_channel(wiphy, freq); |
| 6451 |
|
| 6452 |
done: |
| 6453 |
kfree(buf); |
| 6454 |
|
| 6455 |
roam_info.links[0].channel = notify_channel; |
| 6456 |
roam_info.links[0].bssid = profile->bssid; |
| 6457 |
roam_info.req_ie = conn_info->req_ie; |
| 6458 |
roam_info.req_ie_len = conn_info->req_ie_len; |
| 6459 |
roam_info.resp_ie = conn_info->resp_ie; |
| 6460 |
roam_info.resp_ie_len = conn_info->resp_ie_len; |
| 6461 |
|
| 6462 |
cfg80211_roamed(ndev, &roam_info, GFP_KERNEL); |
| 6463 |
brcmf_dbg(CONN, "Report roaming result\n"); |
| 6464 |
|
| 6465 |
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X && profile->is_ft) { |
| 6466 |
cfg80211_port_authorized(ndev, profile->bssid, NULL, 0, GFP_KERNEL); |
| 6467 |
brcmf_dbg(CONN, "Report port authorized\n"); |
| 6468 |
} |
| 6469 |
|
| 6470 |
set_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state); |
| 6471 |
brcmf_dbg(TRACE, "Exit\n"); |
| 6472 |
return err; |
| 6473 |
} |
| 6474 |
|
| 6475 |
static s32 |
| 6476 |
brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg, |
| 6477 |
struct net_device *ndev, const struct brcmf_event_msg *e, |
| 6478 |
bool completed) |
| 6479 |
{ |
| 6480 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 6481 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 6482 |
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); |
| 6483 |
struct cfg80211_connect_resp_params conn_params; |
| 6484 |
|
| 6485 |
brcmf_dbg(TRACE, "Enter\n"); |
| 6486 |
|
| 6487 |
if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTING, |
| 6488 |
&ifp->vif->sme_state)) { |
| 6489 |
memset(&conn_params, 0, sizeof(conn_params)); |
| 6490 |
if (completed) { |
| 6491 |
brcmf_get_assoc_ies(cfg, ifp); |
| 6492 |
brcmf_update_bss_info(cfg, ifp); |
| 6493 |
set_bit(BRCMF_VIF_STATUS_CONNECTED, |
| 6494 |
&ifp->vif->sme_state); |
| 6495 |
conn_params.status = WLAN_STATUS_SUCCESS; |
| 6496 |
} else { |
| 6497 |
clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, |
| 6498 |
&ifp->vif->sme_state); |
| 6499 |
clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, |
| 6500 |
&ifp->vif->sme_state); |
| 6501 |
conn_params.status = WLAN_STATUS_AUTH_TIMEOUT; |
| 6502 |
} |
| 6503 |
conn_params.links[0].bssid = profile->bssid; |
| 6504 |
conn_params.req_ie = conn_info->req_ie; |
| 6505 |
conn_params.req_ie_len = conn_info->req_ie_len; |
| 6506 |
conn_params.resp_ie = conn_info->resp_ie; |
| 6507 |
conn_params.resp_ie_len = conn_info->resp_ie_len; |
| 6508 |
cfg80211_connect_done(ndev, &conn_params, GFP_KERNEL); |
| 6509 |
brcmf_dbg(CONN, "Report connect result - connection %s\n", |
| 6510 |
completed ? "succeeded" : "failed"); |
| 6511 |
} |
| 6512 |
brcmf_dbg(TRACE, "Exit\n"); |
| 6513 |
return 0; |
| 6514 |
} |
| 6515 |
|
| 6516 |
static s32 |
| 6517 |
brcmf_notify_connect_status_ap(struct brcmf_cfg80211_info *cfg, |
| 6518 |
struct net_device *ndev, |
| 6519 |
const struct brcmf_event_msg *e, void *data) |
| 6520 |
{ |
| 6521 |
struct brcmf_pub *drvr = cfg->pub; |
| 6522 |
static int generation; |
| 6523 |
u32 event = e->event_code; |
| 6524 |
u32 reason = e->reason; |
| 6525 |
struct station_info *sinfo; |
| 6526 |
|
| 6527 |
brcmf_dbg(CONN, "event %s (%u), reason %d\n", |
| 6528 |
brcmf_fweh_event_name(event), event, reason); |
| 6529 |
if (event == BRCMF_E_LINK && reason == BRCMF_E_REASON_LINK_BSSCFG_DIS && |
| 6530 |
ndev != cfg_to_ndev(cfg)) { |
| 6531 |
brcmf_dbg(CONN, "AP mode link down\n"); |
| 6532 |
complete(&cfg->vif_disabled); |
| 6533 |
return 0; |
| 6534 |
} |
| 6535 |
|
| 6536 |
if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) && |
| 6537 |
(reason == BRCMF_E_STATUS_SUCCESS)) { |
| 6538 |
if (!data) { |
| 6539 |
bphy_err(drvr, "No IEs present in ASSOC/REASSOC_IND\n"); |
| 6540 |
return -EINVAL; |
| 6541 |
} |
| 6542 |
|
| 6543 |
sinfo = kzalloc_obj(*sinfo); |
| 6544 |
if (!sinfo) |
| 6545 |
return -ENOMEM; |
| 6546 |
|
| 6547 |
sinfo->assoc_req_ies = data; |
| 6548 |
sinfo->assoc_req_ies_len = e->datalen; |
| 6549 |
generation++; |
| 6550 |
sinfo->generation = generation; |
| 6551 |
cfg80211_new_sta(ndev, e->addr, sinfo, GFP_KERNEL); |
| 6552 |
|
| 6553 |
kfree(sinfo); |
| 6554 |
} else if ((event == BRCMF_E_DISASSOC_IND) || |
| 6555 |
(event == BRCMF_E_DEAUTH_IND) || |
| 6556 |
(event == BRCMF_E_DEAUTH)) { |
| 6557 |
cfg80211_del_sta(ndev, e->addr, GFP_KERNEL); |
| 6558 |
} |
| 6559 |
return 0; |
| 6560 |
} |
| 6561 |
|
| 6562 |
static s32 |
| 6563 |
brcmf_notify_connect_status(struct brcmf_if *ifp, |
| 6564 |
const struct brcmf_event_msg *e, void *data) |
| 6565 |
{ |
| 6566 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 6567 |
struct net_device *ndev = ifp->ndev; |
| 6568 |
struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; |
| 6569 |
struct ieee80211_channel *chan; |
| 6570 |
s32 err = 0; |
| 6571 |
|
| 6572 |
if ((e->event_code == BRCMF_E_DEAUTH) || |
| 6573 |
(e->event_code == BRCMF_E_DEAUTH_IND) || |
| 6574 |
(e->event_code == BRCMF_E_DISASSOC_IND) || |
| 6575 |
((e->event_code == BRCMF_E_LINK) && (!e->flags))) { |
| 6576 |
brcmf_proto_delete_peer(ifp->drvr, ifp->ifidx, (u8 *)e->addr); |
| 6577 |
} |
| 6578 |
|
| 6579 |
if (brcmf_is_apmode(ifp->vif)) { |
| 6580 |
err = brcmf_notify_connect_status_ap(cfg, ndev, e, data); |
| 6581 |
} else if (brcmf_is_linkup(ifp->vif, e)) { |
| 6582 |
brcmf_dbg(CONN, "Linkup\n"); |
| 6583 |
if (brcmf_is_ibssmode(ifp->vif)) { |
| 6584 |
brcmf_inform_ibss(cfg, ndev, e->addr); |
| 6585 |
chan = ieee80211_get_channel(cfg->wiphy, cfg->channel); |
| 6586 |
memcpy(profile->bssid, e->addr, ETH_ALEN); |
| 6587 |
cfg80211_ibss_joined(ndev, e->addr, chan, GFP_KERNEL); |
| 6588 |
clear_bit(BRCMF_VIF_STATUS_CONNECTING, |
| 6589 |
&ifp->vif->sme_state); |
| 6590 |
set_bit(BRCMF_VIF_STATUS_CONNECTED, |
| 6591 |
&ifp->vif->sme_state); |
| 6592 |
} else |
| 6593 |
brcmf_bss_connect_done(cfg, ndev, e, true); |
| 6594 |
brcmf_net_setcarrier(ifp, true); |
| 6595 |
} else if (brcmf_is_linkdown(ifp->vif, e)) { |
| 6596 |
brcmf_dbg(CONN, "Linkdown\n"); |
| 6597 |
if (!brcmf_is_ibssmode(ifp->vif) && |
| 6598 |
(test_bit(BRCMF_VIF_STATUS_CONNECTED, |
| 6599 |
&ifp->vif->sme_state) || |
| 6600 |
test_bit(BRCMF_VIF_STATUS_CONNECTING, |
| 6601 |
&ifp->vif->sme_state))) { |
| 6602 |
if (test_bit(BRCMF_VIF_STATUS_CONNECTED, |
| 6603 |
&ifp->vif->sme_state) && |
| 6604 |
memcmp(profile->bssid, e->addr, ETH_ALEN)) |
| 6605 |
return err; |
| 6606 |
|
| 6607 |
brcmf_bss_connect_done(cfg, ndev, e, false); |
| 6608 |
brcmf_link_down(ifp->vif, |
| 6609 |
brcmf_map_fw_linkdown_reason(e), |
| 6610 |
e->event_code & |
| 6611 |
(BRCMF_E_DEAUTH_IND | |
| 6612 |
BRCMF_E_DISASSOC_IND) |
| 6613 |
? false : true); |
| 6614 |
brcmf_init_prof(ndev_to_prof(ndev)); |
| 6615 |
if (ndev != cfg_to_ndev(cfg)) |
| 6616 |
complete(&cfg->vif_disabled); |
| 6617 |
brcmf_net_setcarrier(ifp, false); |
| 6618 |
} |
| 6619 |
} else if (brcmf_is_nonetwork(cfg, e)) { |
| 6620 |
if (brcmf_is_ibssmode(ifp->vif)) |
| 6621 |
clear_bit(BRCMF_VIF_STATUS_CONNECTING, |
| 6622 |
&ifp->vif->sme_state); |
| 6623 |
else |
| 6624 |
brcmf_bss_connect_done(cfg, ndev, e, false); |
| 6625 |
} |
| 6626 |
|
| 6627 |
return err; |
| 6628 |
} |
| 6629 |
|
| 6630 |
static s32 |
| 6631 |
brcmf_notify_roaming_status(struct brcmf_if *ifp, |
| 6632 |
const struct brcmf_event_msg *e, void *data) |
| 6633 |
{ |
| 6634 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 6635 |
u32 event = e->event_code; |
| 6636 |
u32 status = e->status; |
| 6637 |
|
| 6638 |
if (event == BRCMF_E_ROAM && status == BRCMF_E_STATUS_SUCCESS) { |
| 6639 |
if (test_bit(BRCMF_VIF_STATUS_CONNECTED, |
| 6640 |
&ifp->vif->sme_state)) { |
| 6641 |
brcmf_bss_roaming_done(cfg, ifp->ndev, e); |
| 6642 |
} else { |
| 6643 |
brcmf_bss_connect_done(cfg, ifp->ndev, e, true); |
| 6644 |
brcmf_net_setcarrier(ifp, true); |
| 6645 |
} |
| 6646 |
} |
| 6647 |
|
| 6648 |
return 0; |
| 6649 |
} |
| 6650 |
|
| 6651 |
static s32 |
| 6652 |
brcmf_notify_mic_status(struct brcmf_if *ifp, |
| 6653 |
const struct brcmf_event_msg *e, void *data) |
| 6654 |
{ |
| 6655 |
u16 flags = e->flags; |
| 6656 |
enum nl80211_key_type key_type; |
| 6657 |
|
| 6658 |
if (flags & BRCMF_EVENT_MSG_GROUP) |
| 6659 |
key_type = NL80211_KEYTYPE_GROUP; |
| 6660 |
else |
| 6661 |
key_type = NL80211_KEYTYPE_PAIRWISE; |
| 6662 |
|
| 6663 |
cfg80211_michael_mic_failure(ifp->ndev, (u8 *)&e->addr, key_type, -1, |
| 6664 |
NULL, GFP_KERNEL); |
| 6665 |
|
| 6666 |
return 0; |
| 6667 |
} |
| 6668 |
|
| 6669 |
static s32 brcmf_notify_rssi(struct brcmf_if *ifp, |
| 6670 |
const struct brcmf_event_msg *e, void *data) |
| 6671 |
{ |
| 6672 |
struct brcmf_cfg80211_vif *vif = ifp->vif; |
| 6673 |
struct brcmf_rssi_be *info = data; |
| 6674 |
s32 rssi, snr = 0, noise = 0; |
| 6675 |
s32 low, high, last; |
| 6676 |
|
| 6677 |
if (e->datalen >= sizeof(*info)) { |
| 6678 |
rssi = be32_to_cpu(info->rssi); |
| 6679 |
snr = be32_to_cpu(info->snr); |
| 6680 |
noise = be32_to_cpu(info->noise); |
| 6681 |
} else if (e->datalen >= sizeof(rssi)) { |
| 6682 |
rssi = be32_to_cpu(*(__be32 *)data); |
| 6683 |
} else { |
| 6684 |
brcmf_err("insufficient RSSI event data\n"); |
| 6685 |
return 0; |
| 6686 |
} |
| 6687 |
|
| 6688 |
low = vif->cqm_rssi_low; |
| 6689 |
high = vif->cqm_rssi_high; |
| 6690 |
last = vif->cqm_rssi_last; |
| 6691 |
|
| 6692 |
brcmf_dbg(TRACE, "rssi=%d snr=%d noise=%d low=%d high=%d last=%d\n", |
| 6693 |
rssi, snr, noise, low, high, last); |
| 6694 |
|
| 6695 |
vif->cqm_rssi_last = rssi; |
| 6696 |
|
| 6697 |
if (rssi <= low || rssi == 0) { |
| 6698 |
brcmf_dbg(INFO, "LOW rssi=%d\n", rssi); |
| 6699 |
cfg80211_cqm_rssi_notify(ifp->ndev, |
| 6700 |
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, |
| 6701 |
rssi, GFP_KERNEL); |
| 6702 |
} else if (rssi > high) { |
| 6703 |
brcmf_dbg(INFO, "HIGH rssi=%d\n", rssi); |
| 6704 |
cfg80211_cqm_rssi_notify(ifp->ndev, |
| 6705 |
NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, |
| 6706 |
rssi, GFP_KERNEL); |
| 6707 |
} |
| 6708 |
|
| 6709 |
return 0; |
| 6710 |
} |
| 6711 |
|
| 6712 |
static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, |
| 6713 |
const struct brcmf_event_msg *e, void *data) |
| 6714 |
{ |
| 6715 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 6716 |
struct brcmf_if_event *ifevent = (struct brcmf_if_event *)data; |
| 6717 |
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; |
| 6718 |
struct brcmf_cfg80211_vif *vif; |
| 6719 |
|
| 6720 |
brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfgidx %u\n", |
| 6721 |
ifevent->action, ifevent->flags, ifevent->ifidx, |
| 6722 |
ifevent->bsscfgidx); |
| 6723 |
|
| 6724 |
spin_lock(&event->vif_event_lock); |
| 6725 |
event->action = ifevent->action; |
| 6726 |
vif = event->vif; |
| 6727 |
|
| 6728 |
switch (ifevent->action) { |
| 6729 |
case BRCMF_E_IF_ADD: |
| 6730 |
/* waiting process may have timed out */ |
| 6731 |
if (!cfg->vif_event.vif) { |
| 6732 |
spin_unlock(&event->vif_event_lock); |
| 6733 |
return -EBADF; |
| 6734 |
} |
| 6735 |
|
| 6736 |
ifp->vif = vif; |
| 6737 |
vif->ifp = ifp; |
| 6738 |
if (ifp->ndev) { |
| 6739 |
vif->wdev.netdev = ifp->ndev; |
| 6740 |
ifp->ndev->ieee80211_ptr = &vif->wdev; |
| 6741 |
SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy)); |
| 6742 |
} |
| 6743 |
spin_unlock(&event->vif_event_lock); |
| 6744 |
wake_up(&event->vif_wq); |
| 6745 |
return 0; |
| 6746 |
|
| 6747 |
case BRCMF_E_IF_DEL: |
| 6748 |
spin_unlock(&event->vif_event_lock); |
| 6749 |
/* event may not be upon user request */ |
| 6750 |
if (brcmf_cfg80211_vif_event_armed(cfg)) |
| 6751 |
wake_up(&event->vif_wq); |
| 6752 |
return 0; |
| 6753 |
|
| 6754 |
case BRCMF_E_IF_CHANGE: |
| 6755 |
spin_unlock(&event->vif_event_lock); |
| 6756 |
wake_up(&event->vif_wq); |
| 6757 |
return 0; |
| 6758 |
|
| 6759 |
default: |
| 6760 |
spin_unlock(&event->vif_event_lock); |
| 6761 |
break; |
| 6762 |
} |
| 6763 |
return -EINVAL; |
| 6764 |
} |
| 6765 |
|
| 6766 |
static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf) |
| 6767 |
{ |
| 6768 |
conf->frag_threshold = (u32)-1; |
| 6769 |
conf->rts_threshold = (u32)-1; |
| 6770 |
conf->retry_short = (u32)-1; |
| 6771 |
conf->retry_long = (u32)-1; |
| 6772 |
} |
| 6773 |
|
| 6774 |
static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) |
| 6775 |
{ |
| 6776 |
brcmf_fweh_register(cfg->pub, BRCMF_E_LINK, |
| 6777 |
brcmf_notify_connect_status); |
| 6778 |
brcmf_fweh_register(cfg->pub, BRCMF_E_DEAUTH_IND, |
| 6779 |
brcmf_notify_connect_status); |
| 6780 |
brcmf_fweh_register(cfg->pub, BRCMF_E_DEAUTH, |
| 6781 |
brcmf_notify_connect_status); |
| 6782 |
brcmf_fweh_register(cfg->pub, BRCMF_E_DISASSOC_IND, |
| 6783 |
brcmf_notify_connect_status); |
| 6784 |
brcmf_fweh_register(cfg->pub, BRCMF_E_ASSOC_IND, |
| 6785 |
brcmf_notify_connect_status); |
| 6786 |
brcmf_fweh_register(cfg->pub, BRCMF_E_REASSOC_IND, |
| 6787 |
brcmf_notify_connect_status); |
| 6788 |
brcmf_fweh_register(cfg->pub, BRCMF_E_ROAM, |
| 6789 |
brcmf_notify_roaming_status); |
| 6790 |
brcmf_fweh_register(cfg->pub, BRCMF_E_MIC_ERROR, |
| 6791 |
brcmf_notify_mic_status); |
| 6792 |
brcmf_fweh_register(cfg->pub, BRCMF_E_SET_SSID, |
| 6793 |
brcmf_notify_connect_status); |
| 6794 |
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND, |
| 6795 |
brcmf_notify_sched_scan_results); |
| 6796 |
brcmf_fweh_register(cfg->pub, BRCMF_E_IF, |
| 6797 |
brcmf_notify_vif_event); |
| 6798 |
brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_PROBEREQ_MSG, |
| 6799 |
brcmf_p2p_notify_rx_mgmt_p2p_probereq); |
| 6800 |
brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE, |
| 6801 |
brcmf_p2p_notify_listen_complete); |
| 6802 |
brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX, |
| 6803 |
brcmf_p2p_notify_action_frame_rx); |
| 6804 |
brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_COMPLETE, |
| 6805 |
brcmf_p2p_notify_action_tx_complete); |
| 6806 |
brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE, |
| 6807 |
brcmf_p2p_notify_action_tx_complete); |
| 6808 |
brcmf_fweh_register(cfg->pub, BRCMF_E_PSK_SUP, |
| 6809 |
brcmf_notify_connect_status); |
| 6810 |
brcmf_fweh_register(cfg->pub, BRCMF_E_RSSI, brcmf_notify_rssi); |
| 6811 |
|
| 6812 |
brcmf_fwvid_register_event_handlers(cfg->pub); |
| 6813 |
} |
| 6814 |
|
| 6815 |
static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) |
| 6816 |
{ |
| 6817 |
kfree(cfg->conf); |
| 6818 |
cfg->conf = NULL; |
| 6819 |
kfree(cfg->extra_buf); |
| 6820 |
cfg->extra_buf = NULL; |
| 6821 |
kfree(cfg->wowl.nd); |
| 6822 |
cfg->wowl.nd = NULL; |
| 6823 |
kfree(cfg->wowl.nd_info); |
| 6824 |
cfg->wowl.nd_info = NULL; |
| 6825 |
kfree(cfg->escan_info.escan_buf); |
| 6826 |
cfg->escan_info.escan_buf = NULL; |
| 6827 |
} |
| 6828 |
|
| 6829 |
static s32 brcmf_init_priv_mem(struct brcmf_cfg80211_info *cfg) |
| 6830 |
{ |
| 6831 |
cfg->conf = kzalloc_obj(*cfg->conf); |
| 6832 |
if (!cfg->conf) |
| 6833 |
goto init_priv_mem_out; |
| 6834 |
cfg->extra_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); |
| 6835 |
if (!cfg->extra_buf) |
| 6836 |
goto init_priv_mem_out; |
| 6837 |
cfg->wowl.nd = kzalloc(sizeof(*cfg->wowl.nd) + sizeof(u32), GFP_KERNEL); |
| 6838 |
if (!cfg->wowl.nd) |
| 6839 |
goto init_priv_mem_out; |
| 6840 |
cfg->wowl.nd_info = kzalloc(sizeof(*cfg->wowl.nd_info) + |
| 6841 |
sizeof(struct cfg80211_wowlan_nd_match *), |
| 6842 |
GFP_KERNEL); |
| 6843 |
if (!cfg->wowl.nd_info) |
| 6844 |
goto init_priv_mem_out; |
| 6845 |
cfg->escan_info.escan_buf = kzalloc(BRCMF_ESCAN_BUF_SIZE, GFP_KERNEL); |
| 6846 |
if (!cfg->escan_info.escan_buf) |
| 6847 |
goto init_priv_mem_out; |
| 6848 |
|
| 6849 |
return 0; |
| 6850 |
|
| 6851 |
init_priv_mem_out: |
| 6852 |
brcmf_deinit_priv_mem(cfg); |
| 6853 |
|
| 6854 |
return -ENOMEM; |
| 6855 |
} |
| 6856 |
|
| 6857 |
static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg) |
| 6858 |
{ |
| 6859 |
s32 err = 0; |
| 6860 |
|
| 6861 |
cfg->scan_request = NULL; |
| 6862 |
cfg->pwr_save = true; |
| 6863 |
cfg->dongle_up = false; /* dongle is not up yet */ |
| 6864 |
err = brcmf_init_priv_mem(cfg); |
| 6865 |
if (err) |
| 6866 |
return err; |
| 6867 |
brcmf_register_event_handlers(cfg); |
| 6868 |
mutex_init(&cfg->usr_sync); |
| 6869 |
brcmf_init_escan(cfg); |
| 6870 |
brcmf_init_conf(cfg->conf); |
| 6871 |
brcmf_init_wmm_prio(cfg->ac_priority); |
| 6872 |
init_completion(&cfg->vif_disabled); |
| 6873 |
return err; |
| 6874 |
} |
| 6875 |
|
| 6876 |
static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg) |
| 6877 |
{ |
| 6878 |
cfg->dongle_up = false; /* dongle down */ |
| 6879 |
brcmf_abort_scanning(cfg); |
| 6880 |
brcmf_deinit_priv_mem(cfg); |
| 6881 |
brcmf_clear_assoc_ies(cfg); |
| 6882 |
} |
| 6883 |
|
| 6884 |
static void init_vif_event(struct brcmf_cfg80211_vif_event *event) |
| 6885 |
{ |
| 6886 |
init_waitqueue_head(&event->vif_wq); |
| 6887 |
spin_lock_init(&event->vif_event_lock); |
| 6888 |
} |
| 6889 |
|
| 6890 |
static s32 brcmf_dongle_roam(struct brcmf_if *ifp) |
| 6891 |
{ |
| 6892 |
struct brcmf_pub *drvr = ifp->drvr; |
| 6893 |
s32 err; |
| 6894 |
u32 bcn_timeout; |
| 6895 |
__le32 roamtrigger[2]; |
| 6896 |
__le32 roam_delta[2]; |
| 6897 |
|
| 6898 |
/* Configure beacon timeout value based upon roaming setting */ |
| 6899 |
if (ifp->drvr->settings->roamoff) |
| 6900 |
bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF; |
| 6901 |
else |
| 6902 |
bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON; |
| 6903 |
err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout); |
| 6904 |
if (err) { |
| 6905 |
bphy_err(drvr, "bcn_timeout error (%d)\n", err); |
| 6906 |
goto roam_setup_done; |
| 6907 |
} |
| 6908 |
|
| 6909 |
/* Enable/Disable built-in roaming to allow supplicant to take care of |
| 6910 |
* roaming. |
| 6911 |
*/ |
| 6912 |
brcmf_dbg(INFO, "Internal Roaming = %s\n", |
| 6913 |
ifp->drvr->settings->roamoff ? "Off" : "On"); |
| 6914 |
err = brcmf_fil_iovar_int_set(ifp, "roam_off", |
| 6915 |
ifp->drvr->settings->roamoff); |
| 6916 |
if (err) { |
| 6917 |
bphy_err(drvr, "roam_off error (%d)\n", err); |
| 6918 |
goto roam_setup_done; |
| 6919 |
} |
| 6920 |
|
| 6921 |
roamtrigger[0] = cpu_to_le32(WL_ROAM_TRIGGER_LEVEL); |
| 6922 |
roamtrigger[1] = cpu_to_le32(BRCM_BAND_ALL); |
| 6923 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_TRIGGER, |
| 6924 |
(void *)roamtrigger, sizeof(roamtrigger)); |
| 6925 |
if (err) |
| 6926 |
bphy_err(drvr, "WLC_SET_ROAM_TRIGGER error (%d)\n", err); |
| 6927 |
|
| 6928 |
roam_delta[0] = cpu_to_le32(WL_ROAM_DELTA); |
| 6929 |
roam_delta[1] = cpu_to_le32(BRCM_BAND_ALL); |
| 6930 |
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_DELTA, |
| 6931 |
(void *)roam_delta, sizeof(roam_delta)); |
| 6932 |
if (err) |
| 6933 |
bphy_err(drvr, "WLC_SET_ROAM_DELTA error (%d)\n", err); |
| 6934 |
|
| 6935 |
return 0; |
| 6936 |
|
| 6937 |
roam_setup_done: |
| 6938 |
return err; |
| 6939 |
} |
| 6940 |
|
| 6941 |
static s32 |
| 6942 |
brcmf_dongle_scantime(struct brcmf_if *ifp) |
| 6943 |
{ |
| 6944 |
struct brcmf_pub *drvr = ifp->drvr; |
| 6945 |
s32 err = 0; |
| 6946 |
|
| 6947 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME, |
| 6948 |
BRCMF_SCAN_CHANNEL_TIME); |
| 6949 |
if (err) { |
| 6950 |
bphy_err(drvr, "Scan assoc time error (%d)\n", err); |
| 6951 |
goto dongle_scantime_out; |
| 6952 |
} |
| 6953 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME, |
| 6954 |
BRCMF_SCAN_UNASSOC_TIME); |
| 6955 |
if (err) { |
| 6956 |
bphy_err(drvr, "Scan unassoc time error (%d)\n", err); |
| 6957 |
goto dongle_scantime_out; |
| 6958 |
} |
| 6959 |
|
| 6960 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_PASSIVE_TIME, |
| 6961 |
BRCMF_SCAN_PASSIVE_TIME); |
| 6962 |
if (err) { |
| 6963 |
bphy_err(drvr, "Scan passive time error (%d)\n", err); |
| 6964 |
goto dongle_scantime_out; |
| 6965 |
} |
| 6966 |
|
| 6967 |
dongle_scantime_out: |
| 6968 |
return err; |
| 6969 |
} |
| 6970 |
|
| 6971 |
static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel, |
| 6972 |
struct brcmu_chan *ch) |
| 6973 |
{ |
| 6974 |
u32 ht40_flag; |
| 6975 |
|
| 6976 |
ht40_flag = channel->flags & IEEE80211_CHAN_NO_HT40; |
| 6977 |
if (ch->sb == BRCMU_CHAN_SB_U) { |
| 6978 |
if (ht40_flag == IEEE80211_CHAN_NO_HT40) |
| 6979 |
channel->flags &= ~IEEE80211_CHAN_NO_HT40; |
| 6980 |
channel->flags |= IEEE80211_CHAN_NO_HT40PLUS; |
| 6981 |
} else { |
| 6982 |
/* It should be one of |
| 6983 |
* IEEE80211_CHAN_NO_HT40 or |
| 6984 |
* IEEE80211_CHAN_NO_HT40PLUS |
| 6985 |
*/ |
| 6986 |
channel->flags &= ~IEEE80211_CHAN_NO_HT40; |
| 6987 |
if (ht40_flag == IEEE80211_CHAN_NO_HT40) |
| 6988 |
channel->flags |= IEEE80211_CHAN_NO_HT40MINUS; |
| 6989 |
} |
| 6990 |
} |
| 6991 |
|
| 6992 |
static int brcmf_construct_chaninfo(struct brcmf_cfg80211_info *cfg, |
| 6993 |
u32 bw_cap[]) |
| 6994 |
{ |
| 6995 |
struct wiphy *wiphy = cfg_to_wiphy(cfg); |
| 6996 |
struct brcmf_pub *drvr = cfg->pub; |
| 6997 |
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0); |
| 6998 |
struct ieee80211_supported_band *band; |
| 6999 |
struct ieee80211_channel *channel; |
| 7000 |
struct brcmf_chanspec_list *list; |
| 7001 |
struct brcmu_chan ch; |
| 7002 |
int err; |
| 7003 |
u8 *pbuf; |
| 7004 |
u32 i, j; |
| 7005 |
u32 total; |
| 7006 |
u32 chaninfo; |
| 7007 |
|
| 7008 |
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL); |
| 7009 |
|
| 7010 |
if (pbuf == NULL) |
| 7011 |
return -ENOMEM; |
| 7012 |
|
| 7013 |
list = (struct brcmf_chanspec_list *)pbuf; |
| 7014 |
|
| 7015 |
err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf, |
| 7016 |
BRCMF_DCMD_MEDLEN); |
| 7017 |
if (err) { |
| 7018 |
bphy_err(drvr, "get chanspecs error (%d)\n", err); |
| 7019 |
goto fail_pbuf; |
| 7020 |
} |
| 7021 |
|
| 7022 |
band = wiphy->bands[NL80211_BAND_2GHZ]; |
| 7023 |
if (band) |
| 7024 |
for (i = 0; i < band->n_channels; i++) |
| 7025 |
band->channels[i].flags = IEEE80211_CHAN_DISABLED; |
| 7026 |
band = wiphy->bands[NL80211_BAND_5GHZ]; |
| 7027 |
if (band) |
| 7028 |
for (i = 0; i < band->n_channels; i++) |
| 7029 |
band->channels[i].flags = IEEE80211_CHAN_DISABLED; |
| 7030 |
|
| 7031 |
total = le32_to_cpu(list->count); |
| 7032 |
if (total > BRCMF_MAX_CHANSPEC_LIST) { |
| 7033 |
bphy_err(drvr, "Invalid count of channel Spec. (%u)\n", |
| 7034 |
total); |
| 7035 |
err = -EINVAL; |
| 7036 |
goto fail_pbuf; |
| 7037 |
} |
| 7038 |
|
| 7039 |
for (i = 0; i < total; i++) { |
| 7040 |
ch.chspec = (u16)le32_to_cpu(list->element[i]); |
| 7041 |
cfg->d11inf.decchspec(&ch); |
| 7042 |
|
| 7043 |
if (ch.band == BRCMU_CHAN_BAND_2G) { |
| 7044 |
band = wiphy->bands[NL80211_BAND_2GHZ]; |
| 7045 |
} else if (ch.band == BRCMU_CHAN_BAND_5G) { |
| 7046 |
band = wiphy->bands[NL80211_BAND_5GHZ]; |
| 7047 |
} else { |
| 7048 |
bphy_err(drvr, "Invalid channel Spec. 0x%x.\n", |
| 7049 |
ch.chspec); |
| 7050 |
continue; |
| 7051 |
} |
| 7052 |
if (!band) |
| 7053 |
continue; |
| 7054 |
if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) && |
| 7055 |
ch.bw == BRCMU_CHAN_BW_40) |
| 7056 |
continue; |
| 7057 |
if (!(bw_cap[band->band] & WLC_BW_80MHZ_BIT) && |
| 7058 |
ch.bw == BRCMU_CHAN_BW_80) |
| 7059 |
continue; |
| 7060 |
|
| 7061 |
channel = NULL; |
| 7062 |
for (j = 0; j < band->n_channels; j++) { |
| 7063 |
if (band->channels[j].hw_value == ch.control_ch_num) { |
| 7064 |
channel = &band->channels[j]; |
| 7065 |
break; |
| 7066 |
} |
| 7067 |
} |
| 7068 |
if (!channel) { |
| 7069 |
/* It seems firmware supports some channel we never |
| 7070 |
* considered. Something new in IEEE standard? |
| 7071 |
*/ |
| 7072 |
bphy_err(drvr, "Ignoring unexpected firmware channel %d\n", |
| 7073 |
ch.control_ch_num); |
| 7074 |
continue; |
| 7075 |
} |
| 7076 |
|
| 7077 |
if (channel->orig_flags & IEEE80211_CHAN_DISABLED) |
| 7078 |
continue; |
| 7079 |
|
| 7080 |
/* assuming the chanspecs order is HT20, |
| 7081 |
* HT40 upper, HT40 lower, and VHT80. |
| 7082 |
*/ |
| 7083 |
switch (ch.bw) { |
| 7084 |
case BRCMU_CHAN_BW_160: |
| 7085 |
channel->flags &= ~IEEE80211_CHAN_NO_160MHZ; |
| 7086 |
break; |
| 7087 |
case BRCMU_CHAN_BW_80: |
| 7088 |
channel->flags &= ~IEEE80211_CHAN_NO_80MHZ; |
| 7089 |
break; |
| 7090 |
case BRCMU_CHAN_BW_40: |
| 7091 |
brcmf_update_bw40_channel_flag(channel, &ch); |
| 7092 |
break; |
| 7093 |
default: |
| 7094 |
wiphy_warn(wiphy, "Firmware reported unsupported bandwidth %d\n", |
| 7095 |
ch.bw); |
| 7096 |
fallthrough; |
| 7097 |
case BRCMU_CHAN_BW_20: |
| 7098 |
/* enable the channel and disable other bandwidths |
| 7099 |
* for now as mentioned order assure they are enabled |
| 7100 |
* for subsequent chanspecs. |
| 7101 |
*/ |
| 7102 |
channel->flags = IEEE80211_CHAN_NO_HT40 | |
| 7103 |
IEEE80211_CHAN_NO_80MHZ | |
| 7104 |
IEEE80211_CHAN_NO_160MHZ; |
| 7105 |
ch.bw = BRCMU_CHAN_BW_20; |
| 7106 |
cfg->d11inf.encchspec(&ch); |
| 7107 |
chaninfo = ch.chspec; |
| 7108 |
err = brcmf_fil_bsscfg_int_query(ifp, "per_chan_info", |
| 7109 |
&chaninfo); |
| 7110 |
if (!err) { |
| 7111 |
if (chaninfo & WL_CHAN_RADAR) |
| 7112 |
channel->flags |= |
| 7113 |
(IEEE80211_CHAN_RADAR | |
| 7114 |
IEEE80211_CHAN_NO_IR); |
| 7115 |
if (chaninfo & WL_CHAN_PASSIVE) |
| 7116 |
channel->flags |= |
| 7117 |
IEEE80211_CHAN_NO_IR; |
| 7118 |
} |
| 7119 |
} |
| 7120 |
} |
| 7121 |
|
| 7122 |
fail_pbuf: |
| 7123 |
kfree(pbuf); |
| 7124 |
return err; |
| 7125 |
} |
| 7126 |
|
| 7127 |
static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg) |
| 7128 |
{ |
| 7129 |
struct brcmf_pub *drvr = cfg->pub; |
| 7130 |
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0); |
| 7131 |
struct ieee80211_supported_band *band; |
| 7132 |
struct brcmf_fil_bwcap_le band_bwcap; |
| 7133 |
struct brcmf_chanspec_list *list; |
| 7134 |
u8 *pbuf; |
| 7135 |
u32 val; |
| 7136 |
int err; |
| 7137 |
struct brcmu_chan ch; |
| 7138 |
u32 num_chan; |
| 7139 |
int i, j; |
| 7140 |
|
| 7141 |
/* verify support for bw_cap command */ |
| 7142 |
val = WLC_BAND_5G; |
| 7143 |
err = brcmf_fil_iovar_int_query(ifp, "bw_cap", &val); |
| 7144 |
|
| 7145 |
if (!err) { |
| 7146 |
/* only set 2G bandwidth using bw_cap command */ |
| 7147 |
band_bwcap.band = cpu_to_le32(WLC_BAND_2G); |
| 7148 |
band_bwcap.bw_cap = cpu_to_le32(WLC_BW_CAP_40MHZ); |
| 7149 |
err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap, |
| 7150 |
sizeof(band_bwcap)); |
| 7151 |
} else { |
| 7152 |
brcmf_dbg(INFO, "fallback to mimo_bw_cap\n"); |
| 7153 |
val = WLC_N_BW_40ALL; |
| 7154 |
err = brcmf_fil_iovar_int_set(ifp, "mimo_bw_cap", val); |
| 7155 |
} |
| 7156 |
|
| 7157 |
if (!err) { |
| 7158 |
/* update channel info in 2G band */ |
| 7159 |
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL); |
| 7160 |
|
| 7161 |
if (pbuf == NULL) |
| 7162 |
return -ENOMEM; |
| 7163 |
|
| 7164 |
ch.band = BRCMU_CHAN_BAND_2G; |
| 7165 |
ch.bw = BRCMU_CHAN_BW_40; |
| 7166 |
ch.sb = BRCMU_CHAN_SB_NONE; |
| 7167 |
ch.chnum = 0; |
| 7168 |
cfg->d11inf.encchspec(&ch); |
| 7169 |
|
| 7170 |
/* pass encoded chanspec in query */ |
| 7171 |
*(__le16 *)pbuf = cpu_to_le16(ch.chspec); |
| 7172 |
|
| 7173 |
err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf, |
| 7174 |
BRCMF_DCMD_MEDLEN); |
| 7175 |
if (err) { |
| 7176 |
bphy_err(drvr, "get chanspecs error (%d)\n", err); |
| 7177 |
kfree(pbuf); |
| 7178 |
return err; |
| 7179 |
} |
| 7180 |
|
| 7181 |
band = cfg_to_wiphy(cfg)->bands[NL80211_BAND_2GHZ]; |
| 7182 |
list = (struct brcmf_chanspec_list *)pbuf; |
| 7183 |
num_chan = le32_to_cpu(list->count); |
| 7184 |
if (num_chan > BRCMF_MAX_CHANSPEC_LIST) { |
| 7185 |
bphy_err(drvr, "Invalid count of channel Spec. (%u)\n", |
| 7186 |
num_chan); |
| 7187 |
kfree(pbuf); |
| 7188 |
return -EINVAL; |
| 7189 |
} |
| 7190 |
|
| 7191 |
for (i = 0; i < num_chan; i++) { |
| 7192 |
ch.chspec = (u16)le32_to_cpu(list->element[i]); |
| 7193 |
cfg->d11inf.decchspec(&ch); |
| 7194 |
if (WARN_ON(ch.band != BRCMU_CHAN_BAND_2G)) |
| 7195 |
continue; |
| 7196 |
if (WARN_ON(ch.bw != BRCMU_CHAN_BW_40)) |
| 7197 |
continue; |
| 7198 |
for (j = 0; j < band->n_channels; j++) { |
| 7199 |
if (band->channels[j].hw_value == ch.control_ch_num) |
| 7200 |
break; |
| 7201 |
} |
| 7202 |
if (WARN_ON(j == band->n_channels)) |
| 7203 |
continue; |
| 7204 |
|
| 7205 |
brcmf_update_bw40_channel_flag(&band->channels[j], &ch); |
| 7206 |
} |
| 7207 |
kfree(pbuf); |
| 7208 |
} |
| 7209 |
return err; |
| 7210 |
} |
| 7211 |
|
| 7212 |
static void brcmf_get_bwcap(struct brcmf_if *ifp, u32 bw_cap[]) |
| 7213 |
{ |
| 7214 |
struct brcmf_pub *drvr = ifp->drvr; |
| 7215 |
u32 band, mimo_bwcap; |
| 7216 |
int err; |
| 7217 |
|
| 7218 |
band = WLC_BAND_2G; |
| 7219 |
err = brcmf_fil_iovar_int_query(ifp, "bw_cap", &band); |
| 7220 |
if (!err) { |
| 7221 |
bw_cap[NL80211_BAND_2GHZ] = band; |
| 7222 |
band = WLC_BAND_5G; |
| 7223 |
err = brcmf_fil_iovar_int_query(ifp, "bw_cap", &band); |
| 7224 |
if (!err) { |
| 7225 |
bw_cap[NL80211_BAND_5GHZ] = band; |
| 7226 |
return; |
| 7227 |
} |
| 7228 |
WARN_ON(1); |
| 7229 |
return; |
| 7230 |
} |
| 7231 |
brcmf_dbg(INFO, "fallback to mimo_bw_cap info\n"); |
| 7232 |
err = brcmf_fil_iovar_int_get(ifp, "mimo_bw_cap", &mimo_bwcap); |
| 7233 |
if (err) |
| 7234 |
/* assume 20MHz if firmware does not give a clue */ |
| 7235 |
mimo_bwcap = WLC_N_BW_20ALL; |
| 7236 |
|
| 7237 |
switch (mimo_bwcap) { |
| 7238 |
case WLC_N_BW_40ALL: |
| 7239 |
bw_cap[NL80211_BAND_2GHZ] |= WLC_BW_40MHZ_BIT; |
| 7240 |
fallthrough; |
| 7241 |
case WLC_N_BW_20IN2G_40IN5G: |
| 7242 |
bw_cap[NL80211_BAND_5GHZ] |= WLC_BW_40MHZ_BIT; |
| 7243 |
fallthrough; |
| 7244 |
case WLC_N_BW_20ALL: |
| 7245 |
bw_cap[NL80211_BAND_2GHZ] |= WLC_BW_20MHZ_BIT; |
| 7246 |
bw_cap[NL80211_BAND_5GHZ] |= WLC_BW_20MHZ_BIT; |
| 7247 |
break; |
| 7248 |
default: |
| 7249 |
bphy_err(drvr, "invalid mimo_bw_cap value\n"); |
| 7250 |
} |
| 7251 |
} |
| 7252 |
|
| 7253 |
static void brcmf_update_ht_cap(struct ieee80211_supported_band *band, |
| 7254 |
u32 bw_cap[2], u32 nchain) |
| 7255 |
{ |
| 7256 |
band->ht_cap.ht_supported = true; |
| 7257 |
if (bw_cap[band->band] & WLC_BW_40MHZ_BIT) { |
| 7258 |
band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; |
| 7259 |
band->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| 7260 |
} |
| 7261 |
band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; |
| 7262 |
band->ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; |
| 7263 |
band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; |
| 7264 |
band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16; |
| 7265 |
memset(band->ht_cap.mcs.rx_mask, 0xff, nchain); |
| 7266 |
band->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; |
| 7267 |
} |
| 7268 |
|
| 7269 |
static __le16 brcmf_get_mcs_map(u32 nchain, enum ieee80211_vht_mcs_support supp) |
| 7270 |
{ |
| 7271 |
u16 mcs_map; |
| 7272 |
int i; |
| 7273 |
|
| 7274 |
for (i = 0, mcs_map = 0xFFFF; i < nchain; i++) |
| 7275 |
mcs_map = (mcs_map << 2) | supp; |
| 7276 |
|
| 7277 |
return cpu_to_le16(mcs_map); |
| 7278 |
} |
| 7279 |
|
| 7280 |
static void brcmf_update_vht_cap(struct ieee80211_supported_band *band, |
| 7281 |
u32 bw_cap[2], u32 nchain, u32 txstreams, |
| 7282 |
u32 txbf_bfe_cap, u32 txbf_bfr_cap) |
| 7283 |
{ |
| 7284 |
__le16 mcs_map; |
| 7285 |
|
| 7286 |
/* not allowed in 2.4G band */ |
| 7287 |
if (band->band == NL80211_BAND_2GHZ) |
| 7288 |
return; |
| 7289 |
|
| 7290 |
band->vht_cap.vht_supported = true; |
| 7291 |
/* 80MHz is mandatory */ |
| 7292 |
band->vht_cap.cap |= IEEE80211_VHT_CAP_SHORT_GI_80; |
| 7293 |
if (bw_cap[band->band] & WLC_BW_160MHZ_BIT) { |
| 7294 |
band->vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; |
| 7295 |
band->vht_cap.cap |= IEEE80211_VHT_CAP_SHORT_GI_160; |
| 7296 |
} |
| 7297 |
/* all support 256-QAM */ |
| 7298 |
mcs_map = brcmf_get_mcs_map(nchain, IEEE80211_VHT_MCS_SUPPORT_0_9); |
| 7299 |
band->vht_cap.vht_mcs.rx_mcs_map = mcs_map; |
| 7300 |
band->vht_cap.vht_mcs.tx_mcs_map = mcs_map; |
| 7301 |
|
| 7302 |
/* Beamforming support information */ |
| 7303 |
if (txbf_bfe_cap & BRCMF_TXBF_SU_BFE_CAP) |
| 7304 |
band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; |
| 7305 |
if (txbf_bfe_cap & BRCMF_TXBF_MU_BFE_CAP) |
| 7306 |
band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; |
| 7307 |
if (txbf_bfr_cap & BRCMF_TXBF_SU_BFR_CAP) |
| 7308 |
band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE; |
| 7309 |
if (txbf_bfr_cap & BRCMF_TXBF_MU_BFR_CAP) |
| 7310 |
band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE; |
| 7311 |
|
| 7312 |
if ((txbf_bfe_cap || txbf_bfr_cap) && (txstreams > 1)) { |
| 7313 |
band->vht_cap.cap |= |
| 7314 |
(2 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT); |
| 7315 |
band->vht_cap.cap |= ((txstreams - 1) << |
| 7316 |
IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT); |
| 7317 |
band->vht_cap.cap |= |
| 7318 |
IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB; |
| 7319 |
} |
| 7320 |
} |
| 7321 |
|
| 7322 |
static int brcmf_setup_wiphybands(struct brcmf_cfg80211_info *cfg) |
| 7323 |
{ |
| 7324 |
struct brcmf_pub *drvr = cfg->pub; |
| 7325 |
struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0); |
| 7326 |
struct wiphy *wiphy = cfg_to_wiphy(cfg); |
| 7327 |
u32 nmode; |
| 7328 |
u32 vhtmode = 0; |
| 7329 |
u32 bw_cap[2] = { WLC_BW_20MHZ_BIT, WLC_BW_20MHZ_BIT }; |
| 7330 |
u32 rxchain; |
| 7331 |
u32 nchain; |
| 7332 |
int err; |
| 7333 |
s32 i; |
| 7334 |
struct ieee80211_supported_band *band; |
| 7335 |
u32 txstreams = 0; |
| 7336 |
u32 txbf_bfe_cap = 0; |
| 7337 |
u32 txbf_bfr_cap = 0; |
| 7338 |
|
| 7339 |
(void)brcmf_fil_iovar_int_get(ifp, "vhtmode", &vhtmode); |
| 7340 |
err = brcmf_fil_iovar_int_get(ifp, "nmode", &nmode); |
| 7341 |
if (err) { |
| 7342 |
bphy_err(drvr, "nmode error (%d)\n", err); |
| 7343 |
} else { |
| 7344 |
brcmf_get_bwcap(ifp, bw_cap); |
| 7345 |
} |
| 7346 |
brcmf_dbg(INFO, "nmode=%d, vhtmode=%d, bw_cap=(%d, %d)\n", |
| 7347 |
nmode, vhtmode, bw_cap[NL80211_BAND_2GHZ], |
| 7348 |
bw_cap[NL80211_BAND_5GHZ]); |
| 7349 |
|
| 7350 |
err = brcmf_fil_iovar_int_get(ifp, "rxchain", &rxchain); |
| 7351 |
if (err) { |
| 7352 |
/* rxchain unsupported by firmware of older chips */ |
| 7353 |
if (err == -EBADE) |
| 7354 |
bphy_info_once(drvr, "rxchain unsupported\n"); |
| 7355 |
else |
| 7356 |
bphy_err(drvr, "rxchain error (%d)\n", err); |
| 7357 |
|
| 7358 |
nchain = 1; |
| 7359 |
} else { |
| 7360 |
for (nchain = 0; rxchain; nchain++) |
| 7361 |
rxchain = rxchain & (rxchain - 1); |
| 7362 |
} |
| 7363 |
brcmf_dbg(INFO, "nchain=%d\n", nchain); |
| 7364 |
|
| 7365 |
err = brcmf_construct_chaninfo(cfg, bw_cap); |
| 7366 |
if (err) { |
| 7367 |
bphy_err(drvr, "brcmf_construct_chaninfo failed (%d)\n", err); |
| 7368 |
return err; |
| 7369 |
} |
| 7370 |
|
| 7371 |
if (vhtmode) { |
| 7372 |
(void)brcmf_fil_iovar_int_get(ifp, "txstreams", &txstreams); |
| 7373 |
(void)brcmf_fil_iovar_int_get(ifp, "txbf_bfe_cap", |
| 7374 |
&txbf_bfe_cap); |
| 7375 |
(void)brcmf_fil_iovar_int_get(ifp, "txbf_bfr_cap", |
| 7376 |
&txbf_bfr_cap); |
| 7377 |
} |
| 7378 |
|
| 7379 |
for (i = 0; i < ARRAY_SIZE(wiphy->bands); i++) { |
| 7380 |
band = wiphy->bands[i]; |
| 7381 |
if (band == NULL) |
| 7382 |
continue; |
| 7383 |
|
| 7384 |
if (nmode) |
| 7385 |
brcmf_update_ht_cap(band, bw_cap, nchain); |
| 7386 |
if (vhtmode) |
| 7387 |
brcmf_update_vht_cap(band, bw_cap, nchain, txstreams, |
| 7388 |
txbf_bfe_cap, txbf_bfr_cap); |
| 7389 |
} |
| 7390 |
|
| 7391 |
return 0; |
| 7392 |
} |
| 7393 |
|
| 7394 |
static const struct ieee80211_txrx_stypes |
| 7395 |
brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = { |
| 7396 |
[NL80211_IFTYPE_STATION] = { |
| 7397 |
.tx = 0xffff, |
| 7398 |
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| 7399 |
BIT(IEEE80211_STYPE_AUTH >> 4) | |
| 7400 |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
| 7401 |
}, |
| 7402 |
[NL80211_IFTYPE_P2P_CLIENT] = { |
| 7403 |
.tx = 0xffff, |
| 7404 |
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| 7405 |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
| 7406 |
}, |
| 7407 |
[NL80211_IFTYPE_P2P_GO] = { |
| 7408 |
.tx = 0xffff, |
| 7409 |
.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | |
| 7410 |
BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | |
| 7411 |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | |
| 7412 |
BIT(IEEE80211_STYPE_DISASSOC >> 4) | |
| 7413 |
BIT(IEEE80211_STYPE_AUTH >> 4) | |
| 7414 |
BIT(IEEE80211_STYPE_DEAUTH >> 4) | |
| 7415 |
BIT(IEEE80211_STYPE_ACTION >> 4) |
| 7416 |
}, |
| 7417 |
[NL80211_IFTYPE_P2P_DEVICE] = { |
| 7418 |
.tx = 0xffff, |
| 7419 |
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| 7420 |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
| 7421 |
}, |
| 7422 |
[NL80211_IFTYPE_AP] = { |
| 7423 |
.tx = 0xffff, |
| 7424 |
.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | |
| 7425 |
BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | |
| 7426 |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | |
| 7427 |
BIT(IEEE80211_STYPE_DISASSOC >> 4) | |
| 7428 |
BIT(IEEE80211_STYPE_AUTH >> 4) | |
| 7429 |
BIT(IEEE80211_STYPE_DEAUTH >> 4) | |
| 7430 |
BIT(IEEE80211_STYPE_ACTION >> 4) |
| 7431 |
} |
| 7432 |
}; |
| 7433 |
|
| 7434 |
/** |
| 7435 |
* brcmf_setup_ifmodes() - determine interface modes and combinations. |
| 7436 |
* |
| 7437 |
* @wiphy: wiphy object. |
| 7438 |
* @ifp: interface object needed for feat module api. |
| 7439 |
* |
| 7440 |
* The interface modes and combinations are determined dynamically here |
| 7441 |
* based on firmware functionality. |
| 7442 |
* |
| 7443 |
* no p2p and no mbss: |
| 7444 |
* |
| 7445 |
* #STA <= 1, #AP <= 1, channels = 1, 2 total |
| 7446 |
* |
| 7447 |
* no p2p and mbss: |
| 7448 |
* |
| 7449 |
* #STA <= 1, #AP <= 1, channels = 1, 2 total |
| 7450 |
* #AP <= 4, matching BI, channels = 1, 4 total |
| 7451 |
* |
| 7452 |
* no p2p and rsdb: |
| 7453 |
* #STA <= 1, #AP <= 2, channels = 2, 4 total |
| 7454 |
* |
| 7455 |
* p2p, no mchan, and mbss: |
| 7456 |
* |
| 7457 |
* #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total |
| 7458 |
* #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total |
| 7459 |
* #AP <= 4, matching BI, channels = 1, 4 total |
| 7460 |
* |
| 7461 |
* p2p, mchan, and mbss: |
| 7462 |
* |
| 7463 |
* #STA <= 2, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total |
| 7464 |
* #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total |
| 7465 |
* #AP <= 4, matching BI, channels = 1, 4 total |
| 7466 |
* |
| 7467 |
* p2p, rsdb, and no mbss: |
| 7468 |
* #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 2, AP <= 2, |
| 7469 |
* channels = 2, 4 total |
| 7470 |
* |
| 7471 |
* Return: 0 on success, negative errno on failure |
| 7472 |
*/ |
| 7473 |
static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp) |
| 7474 |
{ |
| 7475 |
struct ieee80211_iface_combination *combo = NULL; |
| 7476 |
struct ieee80211_iface_limit *c0_limits = NULL; |
| 7477 |
struct ieee80211_iface_limit *p2p_limits = NULL; |
| 7478 |
struct ieee80211_iface_limit *mbss_limits = NULL; |
| 7479 |
bool mon_flag, mbss, p2p, rsdb, mchan; |
| 7480 |
int i, c, n_combos, n_limits; |
| 7481 |
|
| 7482 |
mon_flag = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FLAG); |
| 7483 |
mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS); |
| 7484 |
p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P); |
| 7485 |
rsdb = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB); |
| 7486 |
mchan = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN); |
| 7487 |
|
| 7488 |
n_combos = 1 + !!(p2p && !rsdb) + !!mbss; |
| 7489 |
combo = kzalloc_objs(*combo, n_combos); |
| 7490 |
if (!combo) |
| 7491 |
goto err; |
| 7492 |
|
| 7493 |
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | |
| 7494 |
BIT(NL80211_IFTYPE_ADHOC) | |
| 7495 |
BIT(NL80211_IFTYPE_AP); |
| 7496 |
if (mon_flag) |
| 7497 |
wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); |
| 7498 |
if (p2p) |
| 7499 |
wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| 7500 |
BIT(NL80211_IFTYPE_P2P_GO) | |
| 7501 |
BIT(NL80211_IFTYPE_P2P_DEVICE); |
| 7502 |
|
| 7503 |
c = 0; |
| 7504 |
i = 0; |
| 7505 |
n_limits = 1 + mon_flag + (p2p ? 2 : 0) + (rsdb || !p2p); |
| 7506 |
c0_limits = kzalloc_objs(*c0_limits, n_limits); |
| 7507 |
if (!c0_limits) |
| 7508 |
goto err; |
| 7509 |
|
| 7510 |
combo[c].num_different_channels = 1 + (rsdb || (p2p && mchan)); |
| 7511 |
c0_limits[i].max = 1 + (p2p && mchan); |
| 7512 |
c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION); |
| 7513 |
if (mon_flag) { |
| 7514 |
c0_limits[i].max = 1; |
| 7515 |
c0_limits[i++].types = BIT(NL80211_IFTYPE_MONITOR); |
| 7516 |
} |
| 7517 |
if (p2p) { |
| 7518 |
c0_limits[i].max = 1; |
| 7519 |
c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE); |
| 7520 |
c0_limits[i].max = 1 + rsdb; |
| 7521 |
c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| 7522 |
BIT(NL80211_IFTYPE_P2P_GO); |
| 7523 |
} |
| 7524 |
if (p2p && rsdb) { |
| 7525 |
c0_limits[i].max = 2; |
| 7526 |
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP); |
| 7527 |
combo[c].max_interfaces = 4; |
| 7528 |
} else if (p2p) { |
| 7529 |
combo[c].max_interfaces = i; |
| 7530 |
} else if (rsdb) { |
| 7531 |
c0_limits[i].max = 2; |
| 7532 |
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP); |
| 7533 |
combo[c].max_interfaces = 3; |
| 7534 |
} else { |
| 7535 |
c0_limits[i].max = 1; |
| 7536 |
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP); |
| 7537 |
combo[c].max_interfaces = i; |
| 7538 |
} |
| 7539 |
combo[c].n_limits = i; |
| 7540 |
combo[c].limits = c0_limits; |
| 7541 |
|
| 7542 |
if (p2p && !rsdb) { |
| 7543 |
c++; |
| 7544 |
i = 0; |
| 7545 |
p2p_limits = kzalloc_objs(*p2p_limits, 4); |
| 7546 |
if (!p2p_limits) |
| 7547 |
goto err; |
| 7548 |
p2p_limits[i].max = 1; |
| 7549 |
p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION); |
| 7550 |
p2p_limits[i].max = 1; |
| 7551 |
p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP); |
| 7552 |
p2p_limits[i].max = 1; |
| 7553 |
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT); |
| 7554 |
p2p_limits[i].max = 1; |
| 7555 |
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE); |
| 7556 |
combo[c].num_different_channels = 1; |
| 7557 |
combo[c].max_interfaces = i; |
| 7558 |
combo[c].n_limits = i; |
| 7559 |
combo[c].limits = p2p_limits; |
| 7560 |
} |
| 7561 |
|
| 7562 |
if (mbss) { |
| 7563 |
c++; |
| 7564 |
i = 0; |
| 7565 |
n_limits = 1 + mon_flag; |
| 7566 |
mbss_limits = kzalloc_objs(*mbss_limits, n_limits); |
| 7567 |
if (!mbss_limits) |
| 7568 |
goto err; |
| 7569 |
mbss_limits[i].max = 4; |
| 7570 |
mbss_limits[i++].types = BIT(NL80211_IFTYPE_AP); |
| 7571 |
if (mon_flag) { |
| 7572 |
mbss_limits[i].max = 1; |
| 7573 |
mbss_limits[i++].types = BIT(NL80211_IFTYPE_MONITOR); |
| 7574 |
} |
| 7575 |
combo[c].beacon_int_infra_match = true; |
| 7576 |
combo[c].num_different_channels = 1; |
| 7577 |
combo[c].max_interfaces = 4 + mon_flag; |
| 7578 |
combo[c].n_limits = i; |
| 7579 |
combo[c].limits = mbss_limits; |
| 7580 |
} |
| 7581 |
|
| 7582 |
wiphy->n_iface_combinations = n_combos; |
| 7583 |
wiphy->iface_combinations = combo; |
| 7584 |
return 0; |
| 7585 |
|
| 7586 |
err: |
| 7587 |
kfree(c0_limits); |
| 7588 |
kfree(p2p_limits); |
| 7589 |
kfree(mbss_limits); |
| 7590 |
kfree(combo); |
| 7591 |
return -ENOMEM; |
| 7592 |
} |
| 7593 |
|
| 7594 |
#ifdef CONFIG_PM |
| 7595 |
static const struct wiphy_wowlan_support brcmf_wowlan_support = { |
| 7596 |
.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT, |
| 7597 |
.n_patterns = BRCMF_WOWL_MAXPATTERNS, |
| 7598 |
.pattern_max_len = BRCMF_WOWL_MAXPATTERNSIZE, |
| 7599 |
.pattern_min_len = 1, |
| 7600 |
.max_pkt_offset = 1500, |
| 7601 |
}; |
| 7602 |
#endif |
| 7603 |
|
| 7604 |
static void brcmf_wiphy_wowl_params(struct wiphy *wiphy, struct brcmf_if *ifp) |
| 7605 |
{ |
| 7606 |
#ifdef CONFIG_PM |
| 7607 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 7608 |
struct brcmf_pub *drvr = cfg->pub; |
| 7609 |
struct wiphy_wowlan_support *wowl; |
| 7610 |
|
| 7611 |
wowl = kmemdup(&brcmf_wowlan_support, sizeof(brcmf_wowlan_support), |
| 7612 |
GFP_KERNEL); |
| 7613 |
if (!wowl) { |
| 7614 |
bphy_err(drvr, "only support basic wowlan features\n"); |
| 7615 |
wiphy->wowlan = &brcmf_wowlan_support; |
| 7616 |
return; |
| 7617 |
} |
| 7618 |
|
| 7619 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) { |
| 7620 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ND)) { |
| 7621 |
wowl->flags |= WIPHY_WOWLAN_NET_DETECT; |
| 7622 |
wowl->max_nd_match_sets = BRCMF_PNO_MAX_PFN_COUNT; |
| 7623 |
init_waitqueue_head(&cfg->wowl.nd_data_wait); |
| 7624 |
} |
| 7625 |
} |
| 7626 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) { |
| 7627 |
wowl->flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY; |
| 7628 |
wowl->flags |= WIPHY_WOWLAN_GTK_REKEY_FAILURE; |
| 7629 |
} |
| 7630 |
|
| 7631 |
wiphy->wowlan = wowl; |
| 7632 |
#endif |
| 7633 |
} |
| 7634 |
|
| 7635 |
static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) |
| 7636 |
{ |
| 7637 |
struct brcmf_pub *drvr = ifp->drvr; |
| 7638 |
const struct ieee80211_iface_combination *combo; |
| 7639 |
struct ieee80211_supported_band *band; |
| 7640 |
u16 max_interfaces = 0; |
| 7641 |
bool gscan; |
| 7642 |
__le32 bandlist[3]; |
| 7643 |
u32 n_bands; |
| 7644 |
int err, i; |
| 7645 |
|
| 7646 |
wiphy->max_scan_ssids = WL_NUM_SCAN_MAX; |
| 7647 |
wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX; |
| 7648 |
wiphy->max_num_pmkids = BRCMF_MAXPMKID; |
| 7649 |
|
| 7650 |
err = brcmf_setup_ifmodes(wiphy, ifp); |
| 7651 |
if (err) |
| 7652 |
return err; |
| 7653 |
|
| 7654 |
for (i = 0, combo = wiphy->iface_combinations; |
| 7655 |
i < wiphy->n_iface_combinations; i++, combo++) { |
| 7656 |
max_interfaces = max(max_interfaces, combo->max_interfaces); |
| 7657 |
} |
| 7658 |
|
| 7659 |
for (i = 0; i < max_interfaces && i < ARRAY_SIZE(drvr->addresses); |
| 7660 |
i++) { |
| 7661 |
u8 *addr = drvr->addresses[i].addr; |
| 7662 |
|
| 7663 |
memcpy(addr, drvr->mac, ETH_ALEN); |
| 7664 |
if (i) { |
| 7665 |
addr[0] |= BIT(1); |
| 7666 |
addr[ETH_ALEN - 1] ^= i; |
| 7667 |
} |
| 7668 |
} |
| 7669 |
wiphy->addresses = drvr->addresses; |
| 7670 |
wiphy->n_addresses = i; |
| 7671 |
|
| 7672 |
wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; |
| 7673 |
wiphy->cipher_suites = brcmf_cipher_suites; |
| 7674 |
wiphy->n_cipher_suites = ARRAY_SIZE(brcmf_cipher_suites); |
| 7675 |
if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) |
| 7676 |
wiphy->n_cipher_suites--; |
| 7677 |
wiphy->bss_select_support = BIT(NL80211_BSS_SELECT_ATTR_RSSI) | |
| 7678 |
BIT(NL80211_BSS_SELECT_ATTR_BAND_PREF) | |
| 7679 |
BIT(NL80211_BSS_SELECT_ATTR_RSSI_ADJUST); |
| 7680 |
|
| 7681 |
wiphy->bss_param_support = WIPHY_BSS_PARAM_AP_ISOLATE; |
| 7682 |
|
| 7683 |
wiphy->flags |= WIPHY_FLAG_NETNS_OK | |
| 7684 |
WIPHY_FLAG_PS_ON_BY_DEFAULT | |
| 7685 |
WIPHY_FLAG_HAVE_AP_SME | |
| 7686 |
WIPHY_FLAG_OFFCHAN_TX | |
| 7687 |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; |
| 7688 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_TDLS)) |
| 7689 |
wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; |
| 7690 |
if (!ifp->drvr->settings->roamoff) |
| 7691 |
wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM; |
| 7692 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_FWSUP)) { |
| 7693 |
wiphy_ext_feature_set(wiphy, |
| 7694 |
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK); |
| 7695 |
wiphy_ext_feature_set(wiphy, |
| 7696 |
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X); |
| 7697 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE)) |
| 7698 |
wiphy_ext_feature_set(wiphy, |
| 7699 |
NL80211_EXT_FEATURE_SAE_OFFLOAD); |
| 7700 |
} |
| 7701 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_FWAUTH)) { |
| 7702 |
wiphy_ext_feature_set(wiphy, |
| 7703 |
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK); |
| 7704 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE)) |
| 7705 |
wiphy_ext_feature_set(wiphy, |
| 7706 |
NL80211_EXT_FEATURE_SAE_OFFLOAD_AP); |
| 7707 |
} |
| 7708 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE_EXT)) |
| 7709 |
wiphy->features |= NL80211_FEATURE_SAE; |
| 7710 |
wiphy->mgmt_stypes = brcmf_txrx_stypes; |
| 7711 |
wiphy->max_remain_on_channel_duration = 5000; |
| 7712 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) { |
| 7713 |
gscan = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_GSCAN); |
| 7714 |
brcmf_pno_wiphy_params(wiphy, gscan); |
| 7715 |
} |
| 7716 |
/* vendor commands/events support */ |
| 7717 |
wiphy->vendor_commands = brcmf_vendor_cmds; |
| 7718 |
wiphy->n_vendor_commands = BRCMF_VNDR_CMDS_LAST - 1; |
| 7719 |
|
| 7720 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) |
| 7721 |
brcmf_wiphy_wowl_params(wiphy, ifp); |
| 7722 |
err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist, |
| 7723 |
sizeof(bandlist)); |
| 7724 |
if (err) { |
| 7725 |
bphy_err(drvr, "could not obtain band info: err=%d\n", err); |
| 7726 |
return err; |
| 7727 |
} |
| 7728 |
/* first entry in bandlist is number of bands */ |
| 7729 |
n_bands = le32_to_cpu(bandlist[0]); |
| 7730 |
for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) { |
| 7731 |
if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) { |
| 7732 |
band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz), |
| 7733 |
GFP_KERNEL); |
| 7734 |
if (!band) |
| 7735 |
return -ENOMEM; |
| 7736 |
|
| 7737 |
band->channels = kmemdup(&__wl_2ghz_channels, |
| 7738 |
sizeof(__wl_2ghz_channels), |
| 7739 |
GFP_KERNEL); |
| 7740 |
if (!band->channels) { |
| 7741 |
kfree(band); |
| 7742 |
return -ENOMEM; |
| 7743 |
} |
| 7744 |
|
| 7745 |
band->n_channels = ARRAY_SIZE(__wl_2ghz_channels); |
| 7746 |
wiphy->bands[NL80211_BAND_2GHZ] = band; |
| 7747 |
} |
| 7748 |
if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) { |
| 7749 |
band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz), |
| 7750 |
GFP_KERNEL); |
| 7751 |
if (!band) |
| 7752 |
return -ENOMEM; |
| 7753 |
|
| 7754 |
band->channels = kmemdup(&__wl_5ghz_channels, |
| 7755 |
sizeof(__wl_5ghz_channels), |
| 7756 |
GFP_KERNEL); |
| 7757 |
if (!band->channels) { |
| 7758 |
kfree(band); |
| 7759 |
return -ENOMEM; |
| 7760 |
} |
| 7761 |
|
| 7762 |
band->n_channels = ARRAY_SIZE(__wl_5ghz_channels); |
| 7763 |
wiphy->bands[NL80211_BAND_5GHZ] = band; |
| 7764 |
} |
| 7765 |
} |
| 7766 |
|
| 7767 |
if (wiphy->bands[NL80211_BAND_5GHZ] && |
| 7768 |
brcmf_feat_is_enabled(ifp, BRCMF_FEAT_DOT11H)) |
| 7769 |
wiphy_ext_feature_set(wiphy, |
| 7770 |
NL80211_EXT_FEATURE_DFS_OFFLOAD); |
| 7771 |
|
| 7772 |
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); |
| 7773 |
|
| 7774 |
wiphy_read_of_freq_limits(wiphy); |
| 7775 |
|
| 7776 |
return 0; |
| 7777 |
} |
| 7778 |
|
| 7779 |
static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) |
| 7780 |
{ |
| 7781 |
struct brcmf_pub *drvr = cfg->pub; |
| 7782 |
struct net_device *ndev; |
| 7783 |
struct wireless_dev *wdev; |
| 7784 |
struct brcmf_if *ifp; |
| 7785 |
s32 power_mode; |
| 7786 |
s32 err = 0; |
| 7787 |
|
| 7788 |
if (cfg->dongle_up) |
| 7789 |
return err; |
| 7790 |
|
| 7791 |
ndev = cfg_to_ndev(cfg); |
| 7792 |
wdev = ndev->ieee80211_ptr; |
| 7793 |
ifp = netdev_priv(ndev); |
| 7794 |
|
| 7795 |
/* make sure RF is ready for work */ |
| 7796 |
brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); |
| 7797 |
|
| 7798 |
brcmf_dongle_scantime(ifp); |
| 7799 |
|
| 7800 |
power_mode = cfg->pwr_save ? PM_FAST : PM_OFF; |
| 7801 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, power_mode); |
| 7802 |
if (err) |
| 7803 |
goto default_conf_out; |
| 7804 |
brcmf_dbg(INFO, "power save set to %s\n", |
| 7805 |
(power_mode ? "enabled" : "disabled")); |
| 7806 |
|
| 7807 |
err = brcmf_dongle_roam(ifp); |
| 7808 |
if (err) |
| 7809 |
goto default_conf_out; |
| 7810 |
err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, |
| 7811 |
NULL); |
| 7812 |
if (err) |
| 7813 |
goto default_conf_out; |
| 7814 |
|
| 7815 |
brcmf_configure_arp_nd_offload(ifp, true); |
| 7816 |
|
| 7817 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_FAKEFRAG, 1); |
| 7818 |
if (err) { |
| 7819 |
bphy_err(drvr, "failed to set frameburst mode\n"); |
| 7820 |
goto default_conf_out; |
| 7821 |
} |
| 7822 |
|
| 7823 |
cfg->dongle_up = true; |
| 7824 |
default_conf_out: |
| 7825 |
|
| 7826 |
return err; |
| 7827 |
|
| 7828 |
} |
| 7829 |
|
| 7830 |
static s32 __brcmf_cfg80211_up(struct brcmf_if *ifp) |
| 7831 |
{ |
| 7832 |
set_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state); |
| 7833 |
|
| 7834 |
return brcmf_config_dongle(ifp->drvr->config); |
| 7835 |
} |
| 7836 |
|
| 7837 |
static s32 __brcmf_cfg80211_down(struct brcmf_if *ifp) |
| 7838 |
{ |
| 7839 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 7840 |
|
| 7841 |
/* |
| 7842 |
* While going down, if associated with AP disassociate |
| 7843 |
* from AP to save power |
| 7844 |
*/ |
| 7845 |
if (check_vif_up(ifp->vif)) { |
| 7846 |
brcmf_link_down(ifp->vif, WLAN_REASON_UNSPECIFIED, true); |
| 7847 |
|
| 7848 |
/* Make sure WPA_Supplicant receives all the event |
| 7849 |
generated due to DISASSOC call to the fw to keep |
| 7850 |
the state fw and WPA_Supplicant state consistent |
| 7851 |
*/ |
| 7852 |
brcmf_delay(500); |
| 7853 |
} |
| 7854 |
|
| 7855 |
brcmf_abort_scanning(cfg); |
| 7856 |
clear_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state); |
| 7857 |
|
| 7858 |
return 0; |
| 7859 |
} |
| 7860 |
|
| 7861 |
s32 brcmf_cfg80211_up(struct net_device *ndev) |
| 7862 |
{ |
| 7863 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 7864 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 7865 |
s32 err = 0; |
| 7866 |
|
| 7867 |
mutex_lock(&cfg->usr_sync); |
| 7868 |
err = __brcmf_cfg80211_up(ifp); |
| 7869 |
mutex_unlock(&cfg->usr_sync); |
| 7870 |
|
| 7871 |
return err; |
| 7872 |
} |
| 7873 |
|
| 7874 |
s32 brcmf_cfg80211_down(struct net_device *ndev) |
| 7875 |
{ |
| 7876 |
struct brcmf_if *ifp = netdev_priv(ndev); |
| 7877 |
struct brcmf_cfg80211_info *cfg = ifp->drvr->config; |
| 7878 |
s32 err = 0; |
| 7879 |
|
| 7880 |
mutex_lock(&cfg->usr_sync); |
| 7881 |
err = __brcmf_cfg80211_down(ifp); |
| 7882 |
mutex_unlock(&cfg->usr_sync); |
| 7883 |
|
| 7884 |
return err; |
| 7885 |
} |
| 7886 |
|
| 7887 |
bool brcmf_get_vif_state_any(struct brcmf_cfg80211_info *cfg, |
| 7888 |
unsigned long state) |
| 7889 |
{ |
| 7890 |
struct brcmf_cfg80211_vif *vif; |
| 7891 |
|
| 7892 |
list_for_each_entry(vif, &cfg->vif_list, list) { |
| 7893 |
if (test_bit(state, &vif->sme_state)) |
| 7894 |
return true; |
| 7895 |
} |
| 7896 |
return false; |
| 7897 |
} |
| 7898 |
|
| 7899 |
static inline bool vif_event_equals(struct brcmf_cfg80211_vif_event *event, |
| 7900 |
u8 action) |
| 7901 |
{ |
| 7902 |
u8 evt_action; |
| 7903 |
|
| 7904 |
spin_lock(&event->vif_event_lock); |
| 7905 |
evt_action = event->action; |
| 7906 |
spin_unlock(&event->vif_event_lock); |
| 7907 |
return evt_action == action; |
| 7908 |
} |
| 7909 |
|
| 7910 |
void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, |
| 7911 |
struct brcmf_cfg80211_vif *vif) |
| 7912 |
{ |
| 7913 |
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; |
| 7914 |
|
| 7915 |
spin_lock(&event->vif_event_lock); |
| 7916 |
event->vif = vif; |
| 7917 |
event->action = 0; |
| 7918 |
spin_unlock(&event->vif_event_lock); |
| 7919 |
} |
| 7920 |
|
| 7921 |
bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg) |
| 7922 |
{ |
| 7923 |
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; |
| 7924 |
bool armed; |
| 7925 |
|
| 7926 |
spin_lock(&event->vif_event_lock); |
| 7927 |
armed = event->vif != NULL; |
| 7928 |
spin_unlock(&event->vif_event_lock); |
| 7929 |
|
| 7930 |
return armed; |
| 7931 |
} |
| 7932 |
|
| 7933 |
int brcmf_cfg80211_wait_vif_event(struct brcmf_cfg80211_info *cfg, |
| 7934 |
u8 action, ulong timeout) |
| 7935 |
{ |
| 7936 |
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; |
| 7937 |
|
| 7938 |
return wait_event_timeout(event->vif_wq, |
| 7939 |
vif_event_equals(event, action), timeout); |
| 7940 |
} |
| 7941 |
|
| 7942 |
static bool brmcf_use_iso3166_ccode_fallback(struct brcmf_pub *drvr) |
| 7943 |
{ |
| 7944 |
if (drvr->settings->trivial_ccode_map) |
| 7945 |
return true; |
| 7946 |
|
| 7947 |
switch (drvr->bus_if->chip) { |
| 7948 |
case BRCM_CC_43430_CHIP_ID: |
| 7949 |
case BRCM_CC_4345_CHIP_ID: |
| 7950 |
case BRCM_CC_4356_CHIP_ID: |
| 7951 |
case BRCM_CC_43602_CHIP_ID: |
| 7952 |
return true; |
| 7953 |
default: |
| 7954 |
return false; |
| 7955 |
} |
| 7956 |
} |
| 7957 |
|
| 7958 |
static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], |
| 7959 |
struct brcmf_fil_country_le *ccreq) |
| 7960 |
{ |
| 7961 |
struct brcmfmac_pd_cc *country_codes; |
| 7962 |
struct brcmfmac_pd_cc_entry *cc; |
| 7963 |
s32 found_index; |
| 7964 |
int i; |
| 7965 |
|
| 7966 |
if ((alpha2[0] == ccreq->country_abbrev[0]) && |
| 7967 |
(alpha2[1] == ccreq->country_abbrev[1])) { |
| 7968 |
brcmf_dbg(TRACE, "Country code already set\n"); |
| 7969 |
return -EAGAIN; |
| 7970 |
} |
| 7971 |
|
| 7972 |
country_codes = drvr->settings->country_codes; |
| 7973 |
if (!country_codes) { |
| 7974 |
if (brmcf_use_iso3166_ccode_fallback(drvr)) { |
| 7975 |
brcmf_dbg(TRACE, "No country codes configured for device, using ISO3166 code and 0 rev\n"); |
| 7976 |
memset(ccreq, 0, sizeof(*ccreq)); |
| 7977 |
ccreq->country_abbrev[0] = alpha2[0]; |
| 7978 |
ccreq->country_abbrev[1] = alpha2[1]; |
| 7979 |
ccreq->ccode[0] = alpha2[0]; |
| 7980 |
ccreq->ccode[1] = alpha2[1]; |
| 7981 |
return 0; |
| 7982 |
} |
| 7983 |
|
| 7984 |
brcmf_dbg(TRACE, "No country codes configured for device\n"); |
| 7985 |
return -EINVAL; |
| 7986 |
} |
| 7987 |
|
| 7988 |
found_index = -1; |
| 7989 |
for (i = 0; i < country_codes->table_size; i++) { |
| 7990 |
cc = &country_codes->table[i]; |
| 7991 |
if ((cc->iso3166[0] == '\0') && (found_index == -1)) |
| 7992 |
found_index = i; |
| 7993 |
if ((cc->iso3166[0] == alpha2[0]) && |
| 7994 |
(cc->iso3166[1] == alpha2[1])) { |
| 7995 |
found_index = i; |
| 7996 |
break; |
| 7997 |
} |
| 7998 |
} |
| 7999 |
if (found_index == -1) { |
| 8000 |
brcmf_dbg(TRACE, "No country code match found\n"); |
| 8001 |
return -EINVAL; |
| 8002 |
} |
| 8003 |
memset(ccreq, 0, sizeof(*ccreq)); |
| 8004 |
ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev); |
| 8005 |
memcpy(ccreq->ccode, country_codes->table[found_index].cc, |
| 8006 |
BRCMF_COUNTRY_BUF_SZ); |
| 8007 |
ccreq->country_abbrev[0] = alpha2[0]; |
| 8008 |
ccreq->country_abbrev[1] = alpha2[1]; |
| 8009 |
ccreq->country_abbrev[2] = 0; |
| 8010 |
|
| 8011 |
return 0; |
| 8012 |
} |
| 8013 |
|
| 8014 |
static int |
| 8015 |
brcmf_parse_dump_obss(char *buf, struct brcmf_dump_survey *survey) |
| 8016 |
{ |
| 8017 |
int i; |
| 8018 |
char *token; |
| 8019 |
char delim[] = "\n "; |
| 8020 |
unsigned long val; |
| 8021 |
int err = 0; |
| 8022 |
|
| 8023 |
token = strsep(&buf, delim); |
| 8024 |
while (token) { |
| 8025 |
if (!strcmp(token, "OBSS")) { |
| 8026 |
for (i = 0; i < OBSS_TOKEN_IDX; i++) |
| 8027 |
token = strsep(&buf, delim); |
| 8028 |
err = kstrtoul(token, 10, &val); |
| 8029 |
if (err) |
| 8030 |
break; |
| 8031 |
survey->obss = val; |
| 8032 |
} |
| 8033 |
|
| 8034 |
if (!strcmp(token, "IBSS")) { |
| 8035 |
for (i = 0; i < IBSS_TOKEN_IDX; i++) |
| 8036 |
token = strsep(&buf, delim); |
| 8037 |
err = kstrtoul(token, 10, &val); |
| 8038 |
if (err) |
| 8039 |
break; |
| 8040 |
survey->ibss = val; |
| 8041 |
} |
| 8042 |
|
| 8043 |
if (!strcmp(token, "TXDur")) { |
| 8044 |
for (i = 0; i < TX_TOKEN_IDX; i++) |
| 8045 |
token = strsep(&buf, delim); |
| 8046 |
err = kstrtoul(token, 10, &val); |
| 8047 |
if (err) |
| 8048 |
break; |
| 8049 |
survey->tx = val; |
| 8050 |
} |
| 8051 |
|
| 8052 |
if (!strcmp(token, "Category")) { |
| 8053 |
for (i = 0; i < CTG_TOKEN_IDX; i++) |
| 8054 |
token = strsep(&buf, delim); |
| 8055 |
err = kstrtoul(token, 10, &val); |
| 8056 |
if (err) |
| 8057 |
break; |
| 8058 |
survey->no_ctg = val; |
| 8059 |
} |
| 8060 |
|
| 8061 |
if (!strcmp(token, "Packet")) { |
| 8062 |
for (i = 0; i < PKT_TOKEN_IDX; i++) |
| 8063 |
token = strsep(&buf, delim); |
| 8064 |
err = kstrtoul(token, 10, &val); |
| 8065 |
if (err) |
| 8066 |
break; |
| 8067 |
survey->no_pckt = val; |
| 8068 |
} |
| 8069 |
|
| 8070 |
if (!strcmp(token, "Opp(time):")) { |
| 8071 |
for (i = 0; i < IDLE_TOKEN_IDX; i++) |
| 8072 |
token = strsep(&buf, delim); |
| 8073 |
err = kstrtoul(token, 10, &val); |
| 8074 |
if (err) |
| 8075 |
break; |
| 8076 |
survey->idle = val; |
| 8077 |
} |
| 8078 |
|
| 8079 |
token = strsep(&buf, delim); |
| 8080 |
} |
| 8081 |
|
| 8082 |
return err; |
| 8083 |
} |
| 8084 |
|
| 8085 |
static int |
| 8086 |
brcmf_dump_obss(struct brcmf_if *ifp, struct cca_msrmnt_query req, |
| 8087 |
struct brcmf_dump_survey *survey) |
| 8088 |
{ |
| 8089 |
struct cca_stats_n_flags *results; |
| 8090 |
char *buf; |
| 8091 |
int err; |
| 8092 |
|
| 8093 |
buf = kzalloc(sizeof(char) * BRCMF_DCMD_MEDLEN, GFP_KERNEL); |
| 8094 |
if (!buf) |
| 8095 |
return -ENOMEM; |
| 8096 |
|
| 8097 |
memcpy(buf, &req, sizeof(struct cca_msrmnt_query)); |
| 8098 |
err = brcmf_fil_iovar_data_get(ifp, "dump_obss", |
| 8099 |
buf, BRCMF_DCMD_MEDLEN); |
| 8100 |
if (err) { |
| 8101 |
brcmf_err("dump_obss error (%d)\n", err); |
| 8102 |
err = -EINVAL; |
| 8103 |
goto exit; |
| 8104 |
} |
| 8105 |
results = (struct cca_stats_n_flags *)(buf); |
| 8106 |
|
| 8107 |
if (req.msrmnt_query) |
| 8108 |
brcmf_parse_dump_obss(results->buf, survey); |
| 8109 |
|
| 8110 |
exit: |
| 8111 |
kfree(buf); |
| 8112 |
return err; |
| 8113 |
} |
| 8114 |
|
| 8115 |
static s32 |
| 8116 |
brcmf_set_channel(struct brcmf_cfg80211_info *cfg, struct ieee80211_channel *chan) |
| 8117 |
{ |
| 8118 |
u16 chspec = 0; |
| 8119 |
int err = 0; |
| 8120 |
struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); |
| 8121 |
|
| 8122 |
if (chan->flags & IEEE80211_CHAN_DISABLED) |
| 8123 |
return -EINVAL; |
| 8124 |
|
| 8125 |
/* set_channel */ |
| 8126 |
chspec = channel_to_chanspec(&cfg->d11inf, chan); |
| 8127 |
if (chspec != INVCHANSPEC) { |
| 8128 |
err = brcmf_fil_iovar_int_set(ifp, "chanspec", chspec); |
| 8129 |
if (err) { |
| 8130 |
brcmf_err("set chanspec 0x%04x fail, reason %d\n", chspec, err); |
| 8131 |
err = -EINVAL; |
| 8132 |
} |
| 8133 |
} else { |
| 8134 |
brcmf_err("failed to convert host chanspec to fw chanspec\n"); |
| 8135 |
err = -EINVAL; |
| 8136 |
} |
| 8137 |
|
| 8138 |
return err; |
| 8139 |
} |
| 8140 |
|
| 8141 |
static int |
| 8142 |
brcmf_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *ndev, |
| 8143 |
int idx, struct survey_info *info) |
| 8144 |
{ |
| 8145 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 8146 |
struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); |
| 8147 |
struct brcmf_dump_survey survey = {}; |
| 8148 |
struct ieee80211_supported_band *band; |
| 8149 |
enum nl80211_band band_id; |
| 8150 |
struct cca_msrmnt_query req; |
| 8151 |
u32 noise; |
| 8152 |
int err; |
| 8153 |
|
| 8154 |
brcmf_dbg(TRACE, "Enter: channel idx=%d\n", idx); |
| 8155 |
|
| 8156 |
/* Do not run survey when VIF in CONNECTING / CONNECTED states */ |
| 8157 |
if ((test_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) || |
| 8158 |
(test_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state))) { |
| 8159 |
return -EBUSY; |
| 8160 |
} |
| 8161 |
|
| 8162 |
for (band_id = 0; band_id < NUM_NL80211_BANDS; band_id++) { |
| 8163 |
band = wiphy->bands[band_id]; |
| 8164 |
if (!band) |
| 8165 |
continue; |
| 8166 |
if (idx >= band->n_channels) { |
| 8167 |
idx -= band->n_channels; |
| 8168 |
continue; |
| 8169 |
} |
| 8170 |
|
| 8171 |
info->channel = &band->channels[idx]; |
| 8172 |
break; |
| 8173 |
} |
| 8174 |
if (band_id == NUM_NL80211_BANDS) |
| 8175 |
return -ENOENT; |
| 8176 |
|
| 8177 |
/* Setting current channel to the requested channel */ |
| 8178 |
info->filled = 0; |
| 8179 |
if (brcmf_set_channel(cfg, info->channel)) |
| 8180 |
return 0; |
| 8181 |
|
| 8182 |
/* Disable mpc */ |
| 8183 |
brcmf_set_mpc(ifp, 0); |
| 8184 |
|
| 8185 |
/* Set interface up, explicitly. */ |
| 8186 |
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); |
| 8187 |
if (err) { |
| 8188 |
brcmf_err("set interface up failed, err = %d\n", err); |
| 8189 |
goto exit; |
| 8190 |
} |
| 8191 |
|
| 8192 |
/* Get noise value */ |
| 8193 |
err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PHY_NOISE, &noise); |
| 8194 |
if (err) { |
| 8195 |
brcmf_err("Get Phy Noise failed, use dummy value\n"); |
| 8196 |
noise = CHAN_NOISE_DUMMY; |
| 8197 |
} |
| 8198 |
|
| 8199 |
/* Start Measurement for obss stats on current channel */ |
| 8200 |
req.msrmnt_query = 0; |
| 8201 |
req.time_req = ACS_MSRMNT_DELAY; |
| 8202 |
err = brcmf_dump_obss(ifp, req, &survey); |
| 8203 |
if (err) |
| 8204 |
goto exit; |
| 8205 |
|
| 8206 |
/* Add 10 ms for IOVAR completion */ |
| 8207 |
msleep(ACS_MSRMNT_DELAY + 10); |
| 8208 |
|
| 8209 |
/* Issue IOVAR to collect measurement results */ |
| 8210 |
req.msrmnt_query = 1; |
| 8211 |
err = brcmf_dump_obss(ifp, req, &survey); |
| 8212 |
if (err) |
| 8213 |
goto exit; |
| 8214 |
|
| 8215 |
info->noise = noise; |
| 8216 |
info->time = ACS_MSRMNT_DELAY; |
| 8217 |
info->time_busy = ACS_MSRMNT_DELAY - survey.idle; |
| 8218 |
info->time_rx = survey.obss + survey.ibss + survey.no_ctg + |
| 8219 |
survey.no_pckt; |
| 8220 |
info->time_tx = survey.tx; |
| 8221 |
info->filled = SURVEY_INFO_NOISE_DBM | SURVEY_INFO_TIME | |
| 8222 |
SURVEY_INFO_TIME_BUSY | SURVEY_INFO_TIME_RX | |
| 8223 |
SURVEY_INFO_TIME_TX; |
| 8224 |
|
| 8225 |
brcmf_dbg(INFO, "OBSS dump: channel %d: survey duration %d\n", |
| 8226 |
ieee80211_frequency_to_channel(info->channel->center_freq), |
| 8227 |
ACS_MSRMNT_DELAY); |
| 8228 |
brcmf_dbg(INFO, "noise(%d) busy(%llu) rx(%llu) tx(%llu)\n", |
| 8229 |
info->noise, info->time_busy, info->time_rx, info->time_tx); |
| 8230 |
|
| 8231 |
exit: |
| 8232 |
if (!brcmf_is_apmode(ifp->vif)) |
| 8233 |
brcmf_set_mpc(ifp, 1); |
| 8234 |
return err; |
| 8235 |
} |
| 8236 |
|
| 8237 |
static void brcmf_cfg80211_reg_notifier(struct wiphy *wiphy, |
| 8238 |
struct regulatory_request *req) |
| 8239 |
{ |
| 8240 |
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); |
| 8241 |
struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0); |
| 8242 |
struct brcmf_pub *drvr = cfg->pub; |
| 8243 |
struct brcmf_fil_country_le ccreq; |
| 8244 |
s32 err; |
| 8245 |
int i; |
| 8246 |
|
| 8247 |
/* The country code gets set to "00" by default at boot, ignore */ |
| 8248 |
if (req->alpha2[0] == '0' && req->alpha2[1] == '0') |
| 8249 |
return; |
| 8250 |
|
| 8251 |
/* ignore non-ISO3166 country codes */ |
| 8252 |
for (i = 0; i < 2; i++) |
| 8253 |
if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') { |
| 8254 |
bphy_err(drvr, "not an ISO3166 code (0x%02x 0x%02x)\n", |
| 8255 |
req->alpha2[0], req->alpha2[1]); |
| 8256 |
return; |
| 8257 |
} |
| 8258 |
|
| 8259 |
brcmf_dbg(TRACE, "Enter: initiator=%d, alpha=%c%c\n", req->initiator, |
| 8260 |
req->alpha2[0], req->alpha2[1]); |
| 8261 |
|
| 8262 |
err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq)); |
| 8263 |
if (err) { |
| 8264 |
bphy_err(drvr, "Country code iovar returned err = %d\n", err); |
| 8265 |
return; |
| 8266 |
} |
| 8267 |
|
| 8268 |
err = brcmf_translate_country_code(ifp->drvr, req->alpha2, &ccreq); |
| 8269 |
if (err) |
| 8270 |
return; |
| 8271 |
|
| 8272 |
err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq)); |
| 8273 |
if (err) { |
| 8274 |
bphy_err(drvr, "Firmware rejected country setting\n"); |
| 8275 |
return; |
| 8276 |
} |
| 8277 |
brcmf_setup_wiphybands(cfg); |
| 8278 |
} |
| 8279 |
|
| 8280 |
static void brcmf_free_wiphy(struct wiphy *wiphy) |
| 8281 |
{ |
| 8282 |
int i; |
| 8283 |
|
| 8284 |
if (!wiphy) |
| 8285 |
return; |
| 8286 |
|
| 8287 |
if (wiphy->iface_combinations) { |
| 8288 |
for (i = 0; i < wiphy->n_iface_combinations; i++) |
| 8289 |
kfree(wiphy->iface_combinations[i].limits); |
| 8290 |
} |
| 8291 |
kfree(wiphy->iface_combinations); |
| 8292 |
if (wiphy->bands[NL80211_BAND_2GHZ]) { |
| 8293 |
kfree(wiphy->bands[NL80211_BAND_2GHZ]->channels); |
| 8294 |
kfree(wiphy->bands[NL80211_BAND_2GHZ]); |
| 8295 |
} |
| 8296 |
if (wiphy->bands[NL80211_BAND_5GHZ]) { |
| 8297 |
kfree(wiphy->bands[NL80211_BAND_5GHZ]->channels); |
| 8298 |
kfree(wiphy->bands[NL80211_BAND_5GHZ]); |
| 8299 |
} |
| 8300 |
#if IS_ENABLED(CONFIG_PM) |
| 8301 |
if (wiphy->wowlan != &brcmf_wowlan_support) |
| 8302 |
kfree(wiphy->wowlan); |
| 8303 |
#endif |
| 8304 |
} |
| 8305 |
|
| 8306 |
struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, |
| 8307 |
struct cfg80211_ops *ops, |
| 8308 |
bool p2pdev_forced) |
| 8309 |
{ |
| 8310 |
struct wiphy *wiphy = drvr->wiphy; |
| 8311 |
struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev; |
| 8312 |
struct brcmf_cfg80211_info *cfg; |
| 8313 |
struct brcmf_cfg80211_vif *vif; |
| 8314 |
struct brcmf_if *ifp; |
| 8315 |
s32 err = 0; |
| 8316 |
s32 io_type; |
| 8317 |
u16 *cap = NULL; |
| 8318 |
|
| 8319 |
if (!ndev) { |
| 8320 |
bphy_err(drvr, "ndev is invalid\n"); |
| 8321 |
return NULL; |
| 8322 |
} |
| 8323 |
|
| 8324 |
cfg = kzalloc_obj(*cfg); |
| 8325 |
if (!cfg) { |
| 8326 |
bphy_err(drvr, "Could not allocate wiphy device\n"); |
| 8327 |
return NULL; |
| 8328 |
} |
| 8329 |
|
| 8330 |
cfg->wiphy = wiphy; |
| 8331 |
cfg->pub = drvr; |
| 8332 |
init_vif_event(&cfg->vif_event); |
| 8333 |
INIT_LIST_HEAD(&cfg->vif_list); |
| 8334 |
|
| 8335 |
vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION); |
| 8336 |
if (IS_ERR(vif)) |
| 8337 |
goto wiphy_out; |
| 8338 |
|
| 8339 |
ifp = netdev_priv(ndev); |
| 8340 |
vif->ifp = ifp; |
| 8341 |
vif->wdev.netdev = ndev; |
| 8342 |
ndev->ieee80211_ptr = &vif->wdev; |
| 8343 |
SET_NETDEV_DEV(ndev, wiphy_dev(cfg->wiphy)); |
| 8344 |
|
| 8345 |
err = wl_init_priv(cfg); |
| 8346 |
if (err) { |
| 8347 |
bphy_err(drvr, "Failed to init iwm_priv (%d)\n", err); |
| 8348 |
brcmf_free_vif(vif); |
| 8349 |
goto wiphy_out; |
| 8350 |
} |
| 8351 |
ifp->vif = vif; |
| 8352 |
|
| 8353 |
/* determine d11 io type before wiphy setup */ |
| 8354 |
err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_VERSION, &io_type); |
| 8355 |
if (err) { |
| 8356 |
bphy_err(drvr, "Failed to get D11 version (%d)\n", err); |
| 8357 |
goto priv_out; |
| 8358 |
} |
| 8359 |
cfg->d11inf.io_type = (u8)io_type; |
| 8360 |
brcmu_d11_attach(&cfg->d11inf); |
| 8361 |
|
| 8362 |
/* regulatory notifier below needs access to cfg so |
| 8363 |
* assign it now. |
| 8364 |
*/ |
| 8365 |
drvr->config = cfg; |
| 8366 |
|
| 8367 |
err = brcmf_setup_wiphy(wiphy, ifp); |
| 8368 |
if (err < 0) |
| 8369 |
goto priv_out; |
| 8370 |
|
| 8371 |
brcmf_dbg(INFO, "Registering custom regulatory\n"); |
| 8372 |
wiphy->reg_notifier = brcmf_cfg80211_reg_notifier; |
| 8373 |
wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG; |
| 8374 |
wiphy_apply_custom_regulatory(wiphy, &brcmf_regdom); |
| 8375 |
|
| 8376 |
/* firmware defaults to 40MHz disabled in 2G band. We signal |
| 8377 |
* cfg80211 here that we do and have it decide we can enable |
| 8378 |
* it. But first check if device does support 2G operation. |
| 8379 |
*/ |
| 8380 |
if (wiphy->bands[NL80211_BAND_2GHZ]) { |
| 8381 |
cap = &wiphy->bands[NL80211_BAND_2GHZ]->ht_cap.cap; |
| 8382 |
*cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| 8383 |
} |
| 8384 |
#ifdef CONFIG_PM |
| 8385 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) |
| 8386 |
ops->set_rekey_data = brcmf_cfg80211_set_rekey_data; |
| 8387 |
#endif |
| 8388 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_DUMP_OBSS)) |
| 8389 |
ops->dump_survey = brcmf_cfg80211_dump_survey; |
| 8390 |
|
| 8391 |
err = wiphy_register(wiphy); |
| 8392 |
if (err < 0) { |
| 8393 |
bphy_err(drvr, "Could not register wiphy device (%d)\n", err); |
| 8394 |
goto priv_out; |
| 8395 |
} |
| 8396 |
|
| 8397 |
err = brcmf_setup_wiphybands(cfg); |
| 8398 |
if (err) { |
| 8399 |
bphy_err(drvr, "Setting wiphy bands failed (%d)\n", err); |
| 8400 |
goto wiphy_unreg_out; |
| 8401 |
} |
| 8402 |
|
| 8403 |
/* If cfg80211 didn't disable 40MHz HT CAP in wiphy_register(), |
| 8404 |
* setup 40MHz in 2GHz band and enable OBSS scanning. |
| 8405 |
*/ |
| 8406 |
if (cap && (*cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) { |
| 8407 |
err = brcmf_enable_bw40_2g(cfg); |
| 8408 |
if (!err) |
| 8409 |
err = brcmf_fil_iovar_int_set(ifp, "obss_coex", |
| 8410 |
BRCMF_OBSS_COEX_AUTO); |
| 8411 |
else |
| 8412 |
*cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| 8413 |
} |
| 8414 |
|
| 8415 |
err = brcmf_fweh_activate_events(ifp); |
| 8416 |
if (err) { |
| 8417 |
bphy_err(drvr, "FWEH activation failed (%d)\n", err); |
| 8418 |
goto wiphy_unreg_out; |
| 8419 |
} |
| 8420 |
|
| 8421 |
err = brcmf_p2p_attach(cfg, p2pdev_forced); |
| 8422 |
if (err) { |
| 8423 |
bphy_err(drvr, "P2P initialisation failed (%d)\n", err); |
| 8424 |
goto wiphy_unreg_out; |
| 8425 |
} |
| 8426 |
err = brcmf_btcoex_attach(cfg); |
| 8427 |
if (err) { |
| 8428 |
bphy_err(drvr, "BT-coex initialisation failed (%d)\n", err); |
| 8429 |
brcmf_p2p_detach(&cfg->p2p); |
| 8430 |
goto wiphy_unreg_out; |
| 8431 |
} |
| 8432 |
err = brcmf_pno_attach(cfg); |
| 8433 |
if (err) { |
| 8434 |
bphy_err(drvr, "PNO initialisation failed (%d)\n", err); |
| 8435 |
brcmf_btcoex_detach(cfg); |
| 8436 |
brcmf_p2p_detach(&cfg->p2p); |
| 8437 |
goto wiphy_unreg_out; |
| 8438 |
} |
| 8439 |
|
| 8440 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_TDLS)) { |
| 8441 |
err = brcmf_fil_iovar_int_set(ifp, "tdls_enable", 1); |
| 8442 |
if (err) { |
| 8443 |
brcmf_dbg(INFO, "TDLS not enabled (%d)\n", err); |
| 8444 |
wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_TDLS; |
| 8445 |
} else { |
| 8446 |
brcmf_fweh_register(cfg->pub, BRCMF_E_TDLS_PEER_EVENT, |
| 8447 |
brcmf_notify_tdls_peer_event); |
| 8448 |
} |
| 8449 |
} |
| 8450 |
|
| 8451 |
/* (re-) activate FWEH event handling */ |
| 8452 |
err = brcmf_fweh_activate_events(ifp); |
| 8453 |
if (err) { |
| 8454 |
bphy_err(drvr, "FWEH activation failed (%d)\n", err); |
| 8455 |
goto detach; |
| 8456 |
} |
| 8457 |
|
| 8458 |
/* Fill in some of the advertised nl80211 supported features */ |
| 8459 |
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_RANDOM_MAC)) { |
| 8460 |
wiphy->features |= NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR; |
| 8461 |
#ifdef CONFIG_PM |
| 8462 |
if (wiphy->wowlan && |
| 8463 |
wiphy->wowlan->flags & WIPHY_WOWLAN_NET_DETECT) |
| 8464 |
wiphy->features |= NL80211_FEATURE_ND_RANDOM_MAC_ADDR; |
| 8465 |
#endif |
| 8466 |
} |
| 8467 |
|
| 8468 |
return cfg; |
| 8469 |
|
| 8470 |
detach: |
| 8471 |
brcmf_pno_detach(cfg); |
| 8472 |
brcmf_btcoex_detach(cfg); |
| 8473 |
brcmf_p2p_detach(&cfg->p2p); |
| 8474 |
wiphy_unreg_out: |
| 8475 |
wiphy_unregister(cfg->wiphy); |
| 8476 |
priv_out: |
| 8477 |
wl_deinit_priv(cfg); |
| 8478 |
brcmf_free_vif(vif); |
| 8479 |
ifp->vif = NULL; |
| 8480 |
wiphy_out: |
| 8481 |
brcmf_free_wiphy(wiphy); |
| 8482 |
kfree(cfg); |
| 8483 |
return NULL; |
| 8484 |
} |
| 8485 |
|
| 8486 |
void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) |
| 8487 |
{ |
| 8488 |
if (!cfg) |
| 8489 |
return; |
| 8490 |
|
| 8491 |
brcmf_pno_detach(cfg); |
| 8492 |
brcmf_btcoex_detach(cfg); |
| 8493 |
wiphy_unregister(cfg->wiphy); |
| 8494 |
wl_deinit_priv(cfg); |
| 8495 |
cancel_work_sync(&cfg->escan_timeout_work); |
| 8496 |
brcmf_free_wiphy(cfg->wiphy); |
| 8497 |
kfree(cfg); |
| 8498 |
} |