| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* at76c503/at76c505 USB driver |
| 4 |
* |
| 5 |
* Copyright (c) 2002 - 2003 Oliver Kurth |
| 6 |
* Copyright (c) 2004 Joerg Albert <[email protected]> |
| 7 |
* Copyright (c) 2004 Nick Jones |
| 8 |
* Copyright (c) 2004 Balint Seeber <[email protected]> |
| 9 |
* Copyright (c) 2007 Guido Guenther <[email protected]> |
| 10 |
* Copyright (c) 2007 Kalle Valo <[email protected]> |
| 11 |
* Copyright (c) 2010 Sebastian Smolorz <[email protected]> |
| 12 |
* |
| 13 |
* This file is part of the Berlios driver for USB WLAN devices based on the |
| 14 |
* Atmel AT76C503A/505/505A. |
| 15 |
* |
| 16 |
* Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed |
| 17 |
* |
| 18 |
* TODO list is at the wiki: |
| 19 |
* |
| 20 |
* https://wireless.wiki.kernel.org/en/users/Drivers/at76c50x-usb#TODO |
| 21 |
*/ |
| 22 |
|
| 23 |
#include <linux/init.h> |
| 24 |
#include <linux/kernel.h> |
| 25 |
#include <linux/sched.h> |
| 26 |
#include <linux/errno.h> |
| 27 |
#include <linux/slab.h> |
| 28 |
#include <linux/module.h> |
| 29 |
#include <linux/spinlock.h> |
| 30 |
#include <linux/list.h> |
| 31 |
#include <linux/usb.h> |
| 32 |
#include <linux/netdevice.h> |
| 33 |
#include <linux/if_arp.h> |
| 34 |
#include <linux/etherdevice.h> |
| 35 |
#include <linux/ethtool.h> |
| 36 |
#include <linux/wireless.h> |
| 37 |
#include <net/iw_handler.h> |
| 38 |
#include <net/ieee80211_radiotap.h> |
| 39 |
#include <linux/firmware.h> |
| 40 |
#include <linux/leds.h> |
| 41 |
#include <net/mac80211.h> |
| 42 |
|
| 43 |
#include "at76c50x-usb.h" |
| 44 |
|
| 45 |
/* Version information */ |
| 46 |
#define DRIVER_NAME "at76c50x-usb" |
| 47 |
#define DRIVER_VERSION "0.17" |
| 48 |
#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver" |
| 49 |
|
| 50 |
/* at76_debug bits */ |
| 51 |
#define DBG_PROGRESS 0x00000001 /* authentication/accociation */ |
| 52 |
#define DBG_BSS_TABLE 0x00000002 /* show BSS table after scans */ |
| 53 |
#define DBG_IOCTL 0x00000004 /* ioctl calls / settings */ |
| 54 |
#define DBG_MAC_STATE 0x00000008 /* MAC state transitions */ |
| 55 |
#define DBG_TX_DATA 0x00000010 /* tx header */ |
| 56 |
#define DBG_TX_DATA_CONTENT 0x00000020 /* tx content */ |
| 57 |
#define DBG_TX_MGMT 0x00000040 /* tx management */ |
| 58 |
#define DBG_RX_DATA 0x00000080 /* rx data header */ |
| 59 |
#define DBG_RX_DATA_CONTENT 0x00000100 /* rx data content */ |
| 60 |
#define DBG_RX_MGMT 0x00000200 /* rx mgmt frame headers */ |
| 61 |
#define DBG_RX_BEACON 0x00000400 /* rx beacon */ |
| 62 |
#define DBG_RX_CTRL 0x00000800 /* rx control */ |
| 63 |
#define DBG_RX_MGMT_CONTENT 0x00001000 /* rx mgmt content */ |
| 64 |
#define DBG_RX_FRAGS 0x00002000 /* rx data fragment handling */ |
| 65 |
#define DBG_DEVSTART 0x00004000 /* fw download, device start */ |
| 66 |
#define DBG_URB 0x00008000 /* rx urb status, ... */ |
| 67 |
#define DBG_RX_ATMEL_HDR 0x00010000 /* Atmel-specific Rx headers */ |
| 68 |
#define DBG_PROC_ENTRY 0x00020000 /* procedure entries/exits */ |
| 69 |
#define DBG_PM 0x00040000 /* power management settings */ |
| 70 |
#define DBG_BSS_MATCH 0x00080000 /* BSS match failures */ |
| 71 |
#define DBG_PARAMS 0x00100000 /* show configured parameters */ |
| 72 |
#define DBG_WAIT_COMPLETE 0x00200000 /* command completion */ |
| 73 |
#define DBG_RX_FRAGS_SKB 0x00400000 /* skb header of Rx fragments */ |
| 74 |
#define DBG_BSS_TABLE_RM 0x00800000 /* purging bss table entries */ |
| 75 |
#define DBG_MONITOR_MODE 0x01000000 /* monitor mode */ |
| 76 |
#define DBG_MIB 0x02000000 /* dump all MIBs on startup */ |
| 77 |
#define DBG_MGMT_TIMER 0x04000000 /* dump mgmt_timer ops */ |
| 78 |
#define DBG_WE_EVENTS 0x08000000 /* dump wireless events */ |
| 79 |
#define DBG_FW 0x10000000 /* firmware download */ |
| 80 |
#define DBG_DFU 0x20000000 /* device firmware upgrade */ |
| 81 |
#define DBG_CMD 0x40000000 |
| 82 |
#define DBG_MAC80211 0x80000000 |
| 83 |
|
| 84 |
#define DBG_DEFAULTS 0 |
| 85 |
|
| 86 |
/* Use our own dbg macro */ |
| 87 |
#define at76_dbg(bits, format, arg...) \ |
| 88 |
do { \ |
| 89 |
if (at76_debug & (bits)) \ |
| 90 |
printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \ |
| 91 |
} while (0) |
| 92 |
|
| 93 |
#define at76_dbg_dump(bits, buf, len, format, arg...) \ |
| 94 |
do { \ |
| 95 |
if (at76_debug & (bits)) { \ |
| 96 |
printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \ |
| 97 |
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \ |
| 98 |
} \ |
| 99 |
} while (0) |
| 100 |
|
| 101 |
static uint at76_debug = DBG_DEFAULTS; |
| 102 |
|
| 103 |
/* Protect against concurrent firmware loading and parsing */ |
| 104 |
static DEFINE_MUTEX(fw_mutex); |
| 105 |
|
| 106 |
static struct fwentry firmwares[] = { |
| 107 |
[0] = { "" }, |
| 108 |
[BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" }, |
| 109 |
[BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" }, |
| 110 |
[BOARD_503] = { "atmel_at76c503-rfmd.bin" }, |
| 111 |
[BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" }, |
| 112 |
[BOARD_505] = { "atmel_at76c505-rfmd.bin" }, |
| 113 |
[BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" }, |
| 114 |
[BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" }, |
| 115 |
[BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" }, |
| 116 |
}; |
| 117 |
MODULE_FIRMWARE("atmel_at76c503-i3861.bin"); |
| 118 |
MODULE_FIRMWARE("atmel_at76c503-i3863.bin"); |
| 119 |
MODULE_FIRMWARE("atmel_at76c503-rfmd.bin"); |
| 120 |
MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin"); |
| 121 |
MODULE_FIRMWARE("atmel_at76c505-rfmd.bin"); |
| 122 |
MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin"); |
| 123 |
MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin"); |
| 124 |
MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin"); |
| 125 |
|
| 126 |
#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) |
| 127 |
|
| 128 |
static const struct usb_device_id dev_table[] = { |
| 129 |
/* |
| 130 |
* at76c503-i3861 |
| 131 |
*/ |
| 132 |
/* Generic AT76C503/3861 device */ |
| 133 |
{ USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 134 |
/* Linksys WUSB11 v2.1/v2.6 */ |
| 135 |
{ USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 136 |
/* Netgear MA101 rev. A */ |
| 137 |
{ USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 138 |
/* Tekram U300C / Allnet ALL0193 */ |
| 139 |
{ USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 140 |
/* HP HN210W J7801A */ |
| 141 |
{ USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 142 |
/* Sitecom/Z-Com/Zyxel M4Y-750 */ |
| 143 |
{ USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 144 |
/* Dynalink/Askey WLL013 (intersil) */ |
| 145 |
{ USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 146 |
/* EZ connect 11Mpbs USB Wireless Adapter SMC2662W v1 */ |
| 147 |
{ USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 148 |
/* BenQ AWL300 */ |
| 149 |
{ USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 150 |
/* Addtron AWU-120, Compex WLU11 */ |
| 151 |
{ USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 152 |
/* Intel AP310 AnyPoint II USB */ |
| 153 |
{ USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 154 |
/* Dynalink L11U */ |
| 155 |
{ USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 156 |
/* Arescom WL-210, FCC id 07J-GL2411USB */ |
| 157 |
{ USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 158 |
/* I-O DATA WN-B11/USB */ |
| 159 |
{ USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 160 |
/* BT Voyager 1010 */ |
| 161 |
{ USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) }, |
| 162 |
/* |
| 163 |
* at76c503-i3863 |
| 164 |
*/ |
| 165 |
/* Generic AT76C503/3863 device */ |
| 166 |
{ USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) }, |
| 167 |
/* Samsung SWL-2100U */ |
| 168 |
{ USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) }, |
| 169 |
/* |
| 170 |
* at76c503-rfmd |
| 171 |
*/ |
| 172 |
/* Generic AT76C503/RFMD device */ |
| 173 |
{ USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) }, |
| 174 |
/* Dynalink/Askey WLL013 (rfmd) */ |
| 175 |
{ USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) }, |
| 176 |
/* Linksys WUSB11 v2.6 */ |
| 177 |
{ USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) }, |
| 178 |
/* Network Everywhere NWU11B */ |
| 179 |
{ USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) }, |
| 180 |
/* Netgear MA101 rev. B */ |
| 181 |
{ USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) }, |
| 182 |
/* D-Link DWL-120 rev. E */ |
| 183 |
{ USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) }, |
| 184 |
/* Actiontec 802UAT1, HWU01150-01UK */ |
| 185 |
{ USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) }, |
| 186 |
/* AirVast W-Buddie WN210 */ |
| 187 |
{ USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) }, |
| 188 |
/* Dick Smith Electronics XH1153 802.11b USB adapter */ |
| 189 |
{ USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) }, |
| 190 |
/* CNet CNUSB611 */ |
| 191 |
{ USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) }, |
| 192 |
/* FiberLine FL-WL200U */ |
| 193 |
{ USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) }, |
| 194 |
/* BenQ AWL400 USB stick */ |
| 195 |
{ USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) }, |
| 196 |
/* 3Com 3CRSHEW696 */ |
| 197 |
{ USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) }, |
| 198 |
/* Siemens Santis ADSL USB WLAN adapter WLL 013 */ |
| 199 |
{ USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) }, |
| 200 |
/* Belkin F5D6050, version 2 */ |
| 201 |
{ USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) }, |
| 202 |
/* iBlitzz, BWU613 (not *B or *SB) */ |
| 203 |
{ USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) }, |
| 204 |
/* Gigabyte GN-WLBM101 */ |
| 205 |
{ USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) }, |
| 206 |
/* Planex GW-US11S */ |
| 207 |
{ USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) }, |
| 208 |
/* Internal WLAN adapter in h5[4,5]xx series iPAQs */ |
| 209 |
{ USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) }, |
| 210 |
/* Corega Wireless LAN USB-11 mini */ |
| 211 |
{ USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) }, |
| 212 |
/* Corega Wireless LAN USB-11 mini2 */ |
| 213 |
{ USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) }, |
| 214 |
/* Uniden PCW100 */ |
| 215 |
{ USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) }, |
| 216 |
/* |
| 217 |
* at76c503-rfmd-acc |
| 218 |
*/ |
| 219 |
/* SMC2664W */ |
| 220 |
{ USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) }, |
| 221 |
/* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */ |
| 222 |
{ USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) }, |
| 223 |
/* |
| 224 |
* at76c505-rfmd |
| 225 |
*/ |
| 226 |
/* Generic AT76C505/RFMD */ |
| 227 |
{ USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) }, |
| 228 |
/* |
| 229 |
* at76c505-rfmd2958 |
| 230 |
*/ |
| 231 |
/* Generic AT76C505/RFMD, OvisLink WL-1130USB */ |
| 232 |
{ USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, |
| 233 |
/* Fiberline FL-WL240U */ |
| 234 |
{ USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) }, |
| 235 |
/* CNet CNUSB-611G */ |
| 236 |
{ USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) }, |
| 237 |
/* Linksys WUSB11 v2.8 */ |
| 238 |
{ USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) }, |
| 239 |
/* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */ |
| 240 |
{ USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) }, |
| 241 |
/* Corega USB WLAN Stick 11 */ |
| 242 |
{ USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, |
| 243 |
/* Microstar MSI Box MS6978 */ |
| 244 |
{ USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) }, |
| 245 |
/* |
| 246 |
* at76c505a-rfmd2958 |
| 247 |
*/ |
| 248 |
/* Generic AT76C505A device */ |
| 249 |
{ USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) }, |
| 250 |
/* Generic AT76C505AS device */ |
| 251 |
{ USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) }, |
| 252 |
/* Siemens Gigaset USB WLAN Adapter 11 */ |
| 253 |
{ USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) }, |
| 254 |
/* OQO Model 01+ Internal Wi-Fi */ |
| 255 |
{ USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) }, |
| 256 |
/* |
| 257 |
* at76c505amx-rfmd |
| 258 |
*/ |
| 259 |
/* Generic AT76C505AMX device */ |
| 260 |
{ USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) }, |
| 261 |
{ } |
| 262 |
}; |
| 263 |
|
| 264 |
MODULE_DEVICE_TABLE(usb, dev_table); |
| 265 |
|
| 266 |
/* Supported rates of this hardware, bit 7 marks basic rates */ |
| 267 |
static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 }; |
| 268 |
|
| 269 |
static const char *const preambles[] = { "long", "short", "auto" }; |
| 270 |
|
| 271 |
/* Firmware download */ |
| 272 |
/* DFU states */ |
| 273 |
#define STATE_IDLE 0x00 |
| 274 |
#define STATE_DETACH 0x01 |
| 275 |
#define STATE_DFU_IDLE 0x02 |
| 276 |
#define STATE_DFU_DOWNLOAD_SYNC 0x03 |
| 277 |
#define STATE_DFU_DOWNLOAD_BUSY 0x04 |
| 278 |
#define STATE_DFU_DOWNLOAD_IDLE 0x05 |
| 279 |
#define STATE_DFU_MANIFEST_SYNC 0x06 |
| 280 |
#define STATE_DFU_MANIFEST 0x07 |
| 281 |
#define STATE_DFU_MANIFEST_WAIT_RESET 0x08 |
| 282 |
#define STATE_DFU_UPLOAD_IDLE 0x09 |
| 283 |
#define STATE_DFU_ERROR 0x0a |
| 284 |
|
| 285 |
/* DFU commands */ |
| 286 |
#define DFU_DETACH 0 |
| 287 |
#define DFU_DNLOAD 1 |
| 288 |
#define DFU_UPLOAD 2 |
| 289 |
#define DFU_GETSTATUS 3 |
| 290 |
#define DFU_CLRSTATUS 4 |
| 291 |
#define DFU_GETSTATE 5 |
| 292 |
#define DFU_ABORT 6 |
| 293 |
|
| 294 |
#define FW_BLOCK_SIZE 1024 |
| 295 |
|
| 296 |
struct dfu_status { |
| 297 |
unsigned char status; |
| 298 |
unsigned char poll_timeout[3]; |
| 299 |
unsigned char state; |
| 300 |
unsigned char string; |
| 301 |
} __packed; |
| 302 |
|
| 303 |
static inline int at76_is_intersil(enum board_type board) |
| 304 |
{ |
| 305 |
return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863); |
| 306 |
} |
| 307 |
|
| 308 |
static inline int at76_is_503rfmd(enum board_type board) |
| 309 |
{ |
| 310 |
return (board == BOARD_503 || board == BOARD_503_ACC); |
| 311 |
} |
| 312 |
|
| 313 |
static inline int at76_is_505a(enum board_type board) |
| 314 |
{ |
| 315 |
return (board == BOARD_505A || board == BOARD_505AMX); |
| 316 |
} |
| 317 |
|
| 318 |
/* Load a block of the first (internal) part of the firmware */ |
| 319 |
static int at76_load_int_fw_block(struct usb_device *udev, int blockno, |
| 320 |
void *block, int size) |
| 321 |
{ |
| 322 |
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD, |
| 323 |
USB_TYPE_CLASS | USB_DIR_OUT | |
| 324 |
USB_RECIP_INTERFACE, blockno, 0, block, size, |
| 325 |
USB_CTRL_GET_TIMEOUT); |
| 326 |
} |
| 327 |
|
| 328 |
static int at76_dfu_get_status(struct usb_device *udev, |
| 329 |
struct dfu_status *status) |
| 330 |
{ |
| 331 |
int ret; |
| 332 |
|
| 333 |
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS, |
| 334 |
USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, |
| 335 |
0, 0, status, sizeof(*status), |
| 336 |
USB_CTRL_GET_TIMEOUT); |
| 337 |
return ret; |
| 338 |
} |
| 339 |
|
| 340 |
static int at76_dfu_get_state(struct usb_device *udev, u8 *state) |
| 341 |
{ |
| 342 |
int ret; |
| 343 |
|
| 344 |
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE, |
| 345 |
USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, |
| 346 |
0, 0, state, 1, USB_CTRL_GET_TIMEOUT); |
| 347 |
return ret; |
| 348 |
} |
| 349 |
|
| 350 |
/* Convert timeout from the DFU status to jiffies */ |
| 351 |
static inline unsigned long at76_get_timeout(struct dfu_status *s) |
| 352 |
{ |
| 353 |
return msecs_to_jiffies((s->poll_timeout[2] << 16) |
| 354 |
| (s->poll_timeout[1] << 8) |
| 355 |
| (s->poll_timeout[0])); |
| 356 |
} |
| 357 |
|
| 358 |
/* Load internal firmware from the buffer. If manifest_sync_timeout > 0, use |
| 359 |
* its value in jiffies in the MANIFEST_SYNC state. */ |
| 360 |
static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size, |
| 361 |
int manifest_sync_timeout) |
| 362 |
{ |
| 363 |
int ret = 0; |
| 364 |
int need_dfu_state = 1; |
| 365 |
int is_done = 0; |
| 366 |
u32 dfu_timeout = 0; |
| 367 |
int bsize = 0; |
| 368 |
int blockno = 0; |
| 369 |
struct dfu_status *dfu_stat_buf; |
| 370 |
u8 *dfu_state = NULL; |
| 371 |
u8 *block = NULL; |
| 372 |
|
| 373 |
at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size, |
| 374 |
manifest_sync_timeout); |
| 375 |
|
| 376 |
if (!size) { |
| 377 |
dev_err(&udev->dev, "FW buffer length invalid!\n"); |
| 378 |
return -EINVAL; |
| 379 |
} |
| 380 |
|
| 381 |
dfu_stat_buf = kmalloc_obj(*dfu_stat_buf); |
| 382 |
if (!dfu_stat_buf) { |
| 383 |
ret = -ENOMEM; |
| 384 |
goto exit; |
| 385 |
} |
| 386 |
|
| 387 |
block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL); |
| 388 |
if (!block) { |
| 389 |
ret = -ENOMEM; |
| 390 |
goto exit; |
| 391 |
} |
| 392 |
|
| 393 |
dfu_state = kmalloc(sizeof(u8), GFP_KERNEL); |
| 394 |
if (!dfu_state) { |
| 395 |
ret = -ENOMEM; |
| 396 |
goto exit; |
| 397 |
} |
| 398 |
*dfu_state = 0; |
| 399 |
|
| 400 |
do { |
| 401 |
if (need_dfu_state) { |
| 402 |
ret = at76_dfu_get_state(udev, dfu_state); |
| 403 |
if (ret < 0) { |
| 404 |
dev_err(&udev->dev, |
| 405 |
"cannot get DFU state: %d\n", ret); |
| 406 |
goto exit; |
| 407 |
} |
| 408 |
need_dfu_state = 0; |
| 409 |
} |
| 410 |
|
| 411 |
switch (*dfu_state) { |
| 412 |
case STATE_DFU_DOWNLOAD_SYNC: |
| 413 |
at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC"); |
| 414 |
ret = at76_dfu_get_status(udev, dfu_stat_buf); |
| 415 |
if (ret >= 0) { |
| 416 |
*dfu_state = dfu_stat_buf->state; |
| 417 |
dfu_timeout = at76_get_timeout(dfu_stat_buf); |
| 418 |
need_dfu_state = 0; |
| 419 |
} else |
| 420 |
dev_err(&udev->dev, |
| 421 |
"at76_dfu_get_status returned %d\n", |
| 422 |
ret); |
| 423 |
break; |
| 424 |
|
| 425 |
case STATE_DFU_DOWNLOAD_BUSY: |
| 426 |
at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY"); |
| 427 |
need_dfu_state = 1; |
| 428 |
|
| 429 |
at76_dbg(DBG_DFU, "DFU: Resetting device"); |
| 430 |
schedule_timeout_interruptible(dfu_timeout); |
| 431 |
break; |
| 432 |
|
| 433 |
case STATE_DFU_DOWNLOAD_IDLE: |
| 434 |
at76_dbg(DBG_DFU, "DOWNLOAD..."); |
| 435 |
fallthrough; |
| 436 |
case STATE_DFU_IDLE: |
| 437 |
at76_dbg(DBG_DFU, "DFU IDLE"); |
| 438 |
|
| 439 |
bsize = min_t(int, size, FW_BLOCK_SIZE); |
| 440 |
memcpy(block, buf, bsize); |
| 441 |
at76_dbg(DBG_DFU, "int fw, size left = %5d, " |
| 442 |
"bsize = %4d, blockno = %2d", size, bsize, |
| 443 |
blockno); |
| 444 |
ret = |
| 445 |
at76_load_int_fw_block(udev, blockno, block, bsize); |
| 446 |
buf += bsize; |
| 447 |
size -= bsize; |
| 448 |
blockno++; |
| 449 |
|
| 450 |
if (ret != bsize) |
| 451 |
dev_err(&udev->dev, |
| 452 |
"at76_load_int_fw_block returned %d\n", |
| 453 |
ret); |
| 454 |
need_dfu_state = 1; |
| 455 |
break; |
| 456 |
|
| 457 |
case STATE_DFU_MANIFEST_SYNC: |
| 458 |
at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC"); |
| 459 |
|
| 460 |
ret = at76_dfu_get_status(udev, dfu_stat_buf); |
| 461 |
if (ret < 0) |
| 462 |
break; |
| 463 |
|
| 464 |
*dfu_state = dfu_stat_buf->state; |
| 465 |
dfu_timeout = at76_get_timeout(dfu_stat_buf); |
| 466 |
need_dfu_state = 0; |
| 467 |
|
| 468 |
/* override the timeout from the status response, |
| 469 |
needed for AT76C505A */ |
| 470 |
if (manifest_sync_timeout > 0) |
| 471 |
dfu_timeout = manifest_sync_timeout; |
| 472 |
|
| 473 |
at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase"); |
| 474 |
schedule_timeout_interruptible(dfu_timeout); |
| 475 |
break; |
| 476 |
|
| 477 |
case STATE_DFU_MANIFEST: |
| 478 |
at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST"); |
| 479 |
is_done = 1; |
| 480 |
break; |
| 481 |
|
| 482 |
case STATE_DFU_MANIFEST_WAIT_RESET: |
| 483 |
at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET"); |
| 484 |
is_done = 1; |
| 485 |
break; |
| 486 |
|
| 487 |
case STATE_DFU_UPLOAD_IDLE: |
| 488 |
at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE"); |
| 489 |
break; |
| 490 |
|
| 491 |
case STATE_DFU_ERROR: |
| 492 |
at76_dbg(DBG_DFU, "STATE_DFU_ERROR"); |
| 493 |
ret = -EPIPE; |
| 494 |
break; |
| 495 |
|
| 496 |
default: |
| 497 |
at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", *dfu_state); |
| 498 |
ret = -EINVAL; |
| 499 |
break; |
| 500 |
} |
| 501 |
} while (!is_done && (ret >= 0)); |
| 502 |
|
| 503 |
exit: |
| 504 |
kfree(dfu_state); |
| 505 |
kfree(block); |
| 506 |
kfree(dfu_stat_buf); |
| 507 |
|
| 508 |
if (ret >= 0) |
| 509 |
ret = 0; |
| 510 |
|
| 511 |
return ret; |
| 512 |
} |
| 513 |
|
| 514 |
/* LED trigger */ |
| 515 |
static int tx_activity; |
| 516 |
static void at76_ledtrig_tx_timerfunc(struct timer_list *unused); |
| 517 |
static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc); |
| 518 |
DEFINE_LED_TRIGGER(ledtrig_tx); |
| 519 |
|
| 520 |
static void at76_ledtrig_tx_timerfunc(struct timer_list *unused) |
| 521 |
{ |
| 522 |
static int tx_lastactivity; |
| 523 |
|
| 524 |
if (tx_lastactivity != tx_activity) { |
| 525 |
tx_lastactivity = tx_activity; |
| 526 |
led_trigger_event(ledtrig_tx, LED_FULL); |
| 527 |
mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4); |
| 528 |
} else |
| 529 |
led_trigger_event(ledtrig_tx, LED_OFF); |
| 530 |
} |
| 531 |
|
| 532 |
static void at76_ledtrig_tx_activity(void) |
| 533 |
{ |
| 534 |
tx_activity++; |
| 535 |
if (!timer_pending(&ledtrig_tx_timer)) |
| 536 |
mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4); |
| 537 |
} |
| 538 |
|
| 539 |
static int at76_remap(struct usb_device *udev) |
| 540 |
{ |
| 541 |
int ret; |
| 542 |
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a, |
| 543 |
USB_TYPE_VENDOR | USB_DIR_OUT | |
| 544 |
USB_RECIP_INTERFACE, 0, 0, NULL, 0, |
| 545 |
USB_CTRL_GET_TIMEOUT); |
| 546 |
if (ret < 0) |
| 547 |
return ret; |
| 548 |
return 0; |
| 549 |
} |
| 550 |
|
| 551 |
static int at76_get_op_mode(struct usb_device *udev) |
| 552 |
{ |
| 553 |
int ret; |
| 554 |
u8 saved; |
| 555 |
u8 *op_mode; |
| 556 |
|
| 557 |
op_mode = kmalloc(1, GFP_NOIO); |
| 558 |
if (!op_mode) |
| 559 |
return -ENOMEM; |
| 560 |
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, |
| 561 |
USB_TYPE_VENDOR | USB_DIR_IN | |
| 562 |
USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1, |
| 563 |
USB_CTRL_GET_TIMEOUT); |
| 564 |
saved = *op_mode; |
| 565 |
kfree(op_mode); |
| 566 |
|
| 567 |
if (ret < 0) |
| 568 |
return ret; |
| 569 |
else if (ret < 1) |
| 570 |
return -EIO; |
| 571 |
else |
| 572 |
return saved; |
| 573 |
} |
| 574 |
|
| 575 |
/* Load a block of the second ("external") part of the firmware */ |
| 576 |
static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno, |
| 577 |
void *block, int size) |
| 578 |
{ |
| 579 |
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e, |
| 580 |
USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, |
| 581 |
0x0802, blockno, block, size, |
| 582 |
USB_CTRL_GET_TIMEOUT); |
| 583 |
} |
| 584 |
|
| 585 |
static inline int at76_get_hw_cfg(struct usb_device *udev, |
| 586 |
union at76_hwcfg *buf, int buf_size) |
| 587 |
{ |
| 588 |
return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, |
| 589 |
USB_TYPE_VENDOR | USB_DIR_IN | |
| 590 |
USB_RECIP_INTERFACE, 0x0a02, 0, |
| 591 |
buf, buf_size, USB_CTRL_GET_TIMEOUT); |
| 592 |
} |
| 593 |
|
| 594 |
/* Intersil boards use a different "value" for GetHWConfig requests */ |
| 595 |
static inline int at76_get_hw_cfg_intersil(struct usb_device *udev, |
| 596 |
union at76_hwcfg *buf, int buf_size) |
| 597 |
{ |
| 598 |
return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, |
| 599 |
USB_TYPE_VENDOR | USB_DIR_IN | |
| 600 |
USB_RECIP_INTERFACE, 0x0902, 0, |
| 601 |
buf, buf_size, USB_CTRL_GET_TIMEOUT); |
| 602 |
} |
| 603 |
|
| 604 |
/* Get the hardware configuration for the adapter and put it to the appropriate |
| 605 |
* fields of 'priv' (the GetHWConfig request and interpretation of the result |
| 606 |
* depends on the board type) */ |
| 607 |
static int at76_get_hw_config(struct at76_priv *priv) |
| 608 |
{ |
| 609 |
int ret; |
| 610 |
union at76_hwcfg *hwcfg = kmalloc_obj(*hwcfg); |
| 611 |
|
| 612 |
if (!hwcfg) |
| 613 |
return -ENOMEM; |
| 614 |
|
| 615 |
if (at76_is_intersil(priv->board_type)) { |
| 616 |
ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg, |
| 617 |
sizeof(hwcfg->i)); |
| 618 |
if (ret < 0) |
| 619 |
goto exit; |
| 620 |
memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN); |
| 621 |
priv->regulatory_domain = hwcfg->i.regulatory_domain; |
| 622 |
} else if (at76_is_503rfmd(priv->board_type)) { |
| 623 |
ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3)); |
| 624 |
if (ret < 0) |
| 625 |
goto exit; |
| 626 |
memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN); |
| 627 |
priv->regulatory_domain = hwcfg->r3.regulatory_domain; |
| 628 |
} else { |
| 629 |
ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5)); |
| 630 |
if (ret < 0) |
| 631 |
goto exit; |
| 632 |
memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN); |
| 633 |
priv->regulatory_domain = hwcfg->r5.regulatory_domain; |
| 634 |
} |
| 635 |
|
| 636 |
exit: |
| 637 |
kfree(hwcfg); |
| 638 |
if (ret < 0) |
| 639 |
wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n", |
| 640 |
ret); |
| 641 |
|
| 642 |
return ret; |
| 643 |
} |
| 644 |
|
| 645 |
static struct reg_domain const *at76_get_reg_domain(u16 code) |
| 646 |
{ |
| 647 |
int i; |
| 648 |
static struct reg_domain const fd_tab[] = { |
| 649 |
{ 0x10, "FCC (USA)", 0x7ff }, /* ch 1-11 */ |
| 650 |
{ 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */ |
| 651 |
{ 0x30, "ETSI (most of Europe)", 0x1fff }, /* ch 1-13 */ |
| 652 |
{ 0x31, "Spain", 0x600 }, /* ch 10-11 */ |
| 653 |
{ 0x32, "France", 0x1e00 }, /* ch 10-13 */ |
| 654 |
{ 0x40, "MKK (Japan)", 0x2000 }, /* ch 14 */ |
| 655 |
{ 0x41, "MKK1 (Japan)", 0x3fff }, /* ch 1-14 */ |
| 656 |
{ 0x50, "Israel", 0x3fc }, /* ch 3-9 */ |
| 657 |
{ 0x00, "<unknown>", 0xffffffff } /* ch 1-32 */ |
| 658 |
}; |
| 659 |
|
| 660 |
/* Last entry is fallback for unknown domain code */ |
| 661 |
for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++) |
| 662 |
if (code == fd_tab[i].code) |
| 663 |
break; |
| 664 |
|
| 665 |
return &fd_tab[i]; |
| 666 |
} |
| 667 |
|
| 668 |
static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf, |
| 669 |
int buf_size) |
| 670 |
{ |
| 671 |
int ret; |
| 672 |
|
| 673 |
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, |
| 674 |
USB_TYPE_VENDOR | USB_DIR_IN | |
| 675 |
USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size, |
| 676 |
USB_CTRL_GET_TIMEOUT); |
| 677 |
if (ret >= 0 && ret != buf_size) |
| 678 |
return -EIO; |
| 679 |
return ret; |
| 680 |
} |
| 681 |
|
| 682 |
/* Return positive number for status, negative for an error */ |
| 683 |
static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) |
| 684 |
{ |
| 685 |
u8 *stat_buf; |
| 686 |
int ret; |
| 687 |
|
| 688 |
stat_buf = kmalloc(40, GFP_NOIO); |
| 689 |
if (!stat_buf) |
| 690 |
return -ENOMEM; |
| 691 |
|
| 692 |
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22, |
| 693 |
USB_TYPE_VENDOR | USB_DIR_IN | |
| 694 |
USB_RECIP_INTERFACE, cmd, 0, stat_buf, |
| 695 |
40, USB_CTRL_GET_TIMEOUT); |
| 696 |
if (ret >= 0) |
| 697 |
ret = stat_buf[5]; |
| 698 |
kfree(stat_buf); |
| 699 |
|
| 700 |
return ret; |
| 701 |
} |
| 702 |
|
| 703 |
#define MAKE_CMD_CASE(c) case (c): return #c |
| 704 |
static const char *at76_get_cmd_string(u8 cmd_status) |
| 705 |
{ |
| 706 |
switch (cmd_status) { |
| 707 |
MAKE_CMD_CASE(CMD_SET_MIB); |
| 708 |
MAKE_CMD_CASE(CMD_GET_MIB); |
| 709 |
MAKE_CMD_CASE(CMD_SCAN); |
| 710 |
MAKE_CMD_CASE(CMD_JOIN); |
| 711 |
MAKE_CMD_CASE(CMD_START_IBSS); |
| 712 |
MAKE_CMD_CASE(CMD_RADIO_ON); |
| 713 |
MAKE_CMD_CASE(CMD_RADIO_OFF); |
| 714 |
MAKE_CMD_CASE(CMD_STARTUP); |
| 715 |
} |
| 716 |
|
| 717 |
return "UNKNOWN"; |
| 718 |
} |
| 719 |
|
| 720 |
static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, |
| 721 |
int buf_size) |
| 722 |
{ |
| 723 |
int ret; |
| 724 |
size_t total_size; |
| 725 |
struct at76_command *cmd_buf; |
| 726 |
|
| 727 |
total_size = struct_size(cmd_buf, data, buf_size); |
| 728 |
cmd_buf = kmalloc(total_size, GFP_KERNEL); |
| 729 |
if (!cmd_buf) |
| 730 |
return -ENOMEM; |
| 731 |
|
| 732 |
cmd_buf->cmd = cmd; |
| 733 |
cmd_buf->reserved = 0; |
| 734 |
cmd_buf->size = cpu_to_le16(buf_size); |
| 735 |
memcpy(cmd_buf->data, buf, buf_size); |
| 736 |
|
| 737 |
at76_dbg_dump(DBG_CMD, cmd_buf, total_size, |
| 738 |
"issuing command %s (0x%02x)", |
| 739 |
at76_get_cmd_string(cmd), cmd); |
| 740 |
|
| 741 |
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e, |
| 742 |
USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, |
| 743 |
0, 0, cmd_buf, total_size, USB_CTRL_GET_TIMEOUT); |
| 744 |
kfree(cmd_buf); |
| 745 |
return ret; |
| 746 |
} |
| 747 |
|
| 748 |
#define MAKE_CMD_STATUS_CASE(c) case (c): return #c |
| 749 |
static const char *at76_get_cmd_status_string(u8 cmd_status) |
| 750 |
{ |
| 751 |
switch (cmd_status) { |
| 752 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE); |
| 753 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE); |
| 754 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN); |
| 755 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER); |
| 756 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED); |
| 757 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT); |
| 758 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS); |
| 759 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE); |
| 760 |
MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED); |
| 761 |
} |
| 762 |
|
| 763 |
return "UNKNOWN"; |
| 764 |
} |
| 765 |
|
| 766 |
/* Wait until the command is completed */ |
| 767 |
static int at76_wait_completion(struct at76_priv *priv, int cmd) |
| 768 |
{ |
| 769 |
int status = 0; |
| 770 |
unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT; |
| 771 |
|
| 772 |
do { |
| 773 |
status = at76_get_cmd_status(priv->udev, cmd); |
| 774 |
if (status < 0) { |
| 775 |
wiphy_err(priv->hw->wiphy, |
| 776 |
"at76_get_cmd_status failed: %d\n", |
| 777 |
status); |
| 778 |
break; |
| 779 |
} |
| 780 |
|
| 781 |
at76_dbg(DBG_WAIT_COMPLETE, |
| 782 |
"%s: Waiting on cmd %d, status = %d (%s)", |
| 783 |
wiphy_name(priv->hw->wiphy), cmd, status, |
| 784 |
at76_get_cmd_status_string(status)); |
| 785 |
|
| 786 |
if (status != CMD_STATUS_IN_PROGRESS |
| 787 |
&& status != CMD_STATUS_IDLE) |
| 788 |
break; |
| 789 |
|
| 790 |
schedule_timeout_interruptible(HZ / 10); /* 100 ms */ |
| 791 |
if (time_after(jiffies, timeout)) { |
| 792 |
wiphy_err(priv->hw->wiphy, |
| 793 |
"completion timeout for command %d\n", cmd); |
| 794 |
status = -ETIMEDOUT; |
| 795 |
break; |
| 796 |
} |
| 797 |
} while (1); |
| 798 |
|
| 799 |
return status; |
| 800 |
} |
| 801 |
|
| 802 |
static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf) |
| 803 |
{ |
| 804 |
int ret; |
| 805 |
|
| 806 |
ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf, |
| 807 |
offsetof(struct set_mib_buffer, |
| 808 |
data) + buf->size); |
| 809 |
if (ret < 0) |
| 810 |
return ret; |
| 811 |
|
| 812 |
ret = at76_wait_completion(priv, CMD_SET_MIB); |
| 813 |
if (ret != CMD_STATUS_COMPLETE) { |
| 814 |
wiphy_info(priv->hw->wiphy, |
| 815 |
"set_mib: at76_wait_completion failed with %d\n", |
| 816 |
ret); |
| 817 |
ret = -EIO; |
| 818 |
} |
| 819 |
|
| 820 |
return ret; |
| 821 |
} |
| 822 |
|
| 823 |
/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */ |
| 824 |
static int at76_set_radio(struct at76_priv *priv, int enable) |
| 825 |
{ |
| 826 |
int ret; |
| 827 |
int cmd; |
| 828 |
|
| 829 |
if (priv->radio_on == enable) |
| 830 |
return 0; |
| 831 |
|
| 832 |
cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF; |
| 833 |
|
| 834 |
ret = at76_set_card_command(priv->udev, cmd, NULL, 0); |
| 835 |
if (ret < 0) |
| 836 |
wiphy_err(priv->hw->wiphy, |
| 837 |
"at76_set_card_command(%d) failed: %d\n", cmd, ret); |
| 838 |
else |
| 839 |
ret = 1; |
| 840 |
|
| 841 |
priv->radio_on = enable; |
| 842 |
return ret; |
| 843 |
} |
| 844 |
|
| 845 |
/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */ |
| 846 |
static int at76_set_pm_mode(struct at76_priv *priv) |
| 847 |
{ |
| 848 |
int ret = 0; |
| 849 |
|
| 850 |
priv->mib_buf.type = MIB_MAC_MGMT; |
| 851 |
priv->mib_buf.size = 1; |
| 852 |
priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode); |
| 853 |
priv->mib_buf.data.byte = priv->pm_mode; |
| 854 |
|
| 855 |
ret = at76_set_mib(priv, &priv->mib_buf); |
| 856 |
if (ret < 0) |
| 857 |
wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n", |
| 858 |
ret); |
| 859 |
|
| 860 |
return ret; |
| 861 |
} |
| 862 |
|
| 863 |
static int at76_set_preamble(struct at76_priv *priv, u8 type) |
| 864 |
{ |
| 865 |
int ret = 0; |
| 866 |
|
| 867 |
priv->mib_buf.type = MIB_LOCAL; |
| 868 |
priv->mib_buf.size = 1; |
| 869 |
priv->mib_buf.index = offsetof(struct mib_local, preamble_type); |
| 870 |
priv->mib_buf.data.byte = type; |
| 871 |
|
| 872 |
ret = at76_set_mib(priv, &priv->mib_buf); |
| 873 |
if (ret < 0) |
| 874 |
wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n", |
| 875 |
ret); |
| 876 |
|
| 877 |
return ret; |
| 878 |
} |
| 879 |
|
| 880 |
static int at76_set_frag(struct at76_priv *priv, u16 size) |
| 881 |
{ |
| 882 |
int ret = 0; |
| 883 |
|
| 884 |
priv->mib_buf.type = MIB_MAC; |
| 885 |
priv->mib_buf.size = 2; |
| 886 |
priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold); |
| 887 |
priv->mib_buf.data.word = cpu_to_le16(size); |
| 888 |
|
| 889 |
ret = at76_set_mib(priv, &priv->mib_buf); |
| 890 |
if (ret < 0) |
| 891 |
wiphy_err(priv->hw->wiphy, |
| 892 |
"set_mib (frag threshold) failed: %d\n", ret); |
| 893 |
|
| 894 |
return ret; |
| 895 |
} |
| 896 |
|
| 897 |
static int at76_set_rts(struct at76_priv *priv, u16 size) |
| 898 |
{ |
| 899 |
int ret = 0; |
| 900 |
|
| 901 |
priv->mib_buf.type = MIB_MAC; |
| 902 |
priv->mib_buf.size = 2; |
| 903 |
priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold); |
| 904 |
priv->mib_buf.data.word = cpu_to_le16(size); |
| 905 |
|
| 906 |
ret = at76_set_mib(priv, &priv->mib_buf); |
| 907 |
if (ret < 0) |
| 908 |
wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret); |
| 909 |
|
| 910 |
return ret; |
| 911 |
} |
| 912 |
|
| 913 |
static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff) |
| 914 |
{ |
| 915 |
int ret = 0; |
| 916 |
|
| 917 |
priv->mib_buf.type = MIB_LOCAL; |
| 918 |
priv->mib_buf.size = 1; |
| 919 |
priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback); |
| 920 |
priv->mib_buf.data.byte = onoff; |
| 921 |
|
| 922 |
ret = at76_set_mib(priv, &priv->mib_buf); |
| 923 |
if (ret < 0) |
| 924 |
wiphy_err(priv->hw->wiphy, |
| 925 |
"set_mib (autorate fallback) failed: %d\n", ret); |
| 926 |
|
| 927 |
return ret; |
| 928 |
} |
| 929 |
|
| 930 |
static void at76_dump_mib_mac_addr(struct at76_priv *priv) |
| 931 |
{ |
| 932 |
int i; |
| 933 |
int ret; |
| 934 |
struct mib_mac_addr *m = kmalloc_obj(*m); |
| 935 |
|
| 936 |
if (!m) |
| 937 |
return; |
| 938 |
|
| 939 |
ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m, sizeof(*m)); |
| 940 |
if (ret < 0) { |
| 941 |
wiphy_err(priv->hw->wiphy, |
| 942 |
"at76_get_mib (MAC_ADDR) failed: %d\n", ret); |
| 943 |
goto exit; |
| 944 |
} |
| 945 |
|
| 946 |
at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x", |
| 947 |
wiphy_name(priv->hw->wiphy), |
| 948 |
m->mac_addr, m->res[0], m->res[1]); |
| 949 |
for (i = 0; i < ARRAY_SIZE(m->group_addr); i++) |
| 950 |
at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, " |
| 951 |
"status %d", wiphy_name(priv->hw->wiphy), i, |
| 952 |
m->group_addr[i], m->group_addr_status[i]); |
| 953 |
exit: |
| 954 |
kfree(m); |
| 955 |
} |
| 956 |
|
| 957 |
static void at76_dump_mib_mac_wep(struct at76_priv *priv) |
| 958 |
{ |
| 959 |
int i; |
| 960 |
int ret; |
| 961 |
int key_len; |
| 962 |
struct mib_mac_wep *m = kmalloc_obj(*m); |
| 963 |
|
| 964 |
if (!m) |
| 965 |
return; |
| 966 |
|
| 967 |
ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m, sizeof(*m)); |
| 968 |
if (ret < 0) { |
| 969 |
wiphy_err(priv->hw->wiphy, |
| 970 |
"at76_get_mib (MAC_WEP) failed: %d\n", ret); |
| 971 |
goto exit; |
| 972 |
} |
| 973 |
|
| 974 |
at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u " |
| 975 |
"key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u " |
| 976 |
"encr_level %u key %d", wiphy_name(priv->hw->wiphy), |
| 977 |
m->privacy_invoked, m->wep_default_key_id, |
| 978 |
m->wep_key_mapping_len, m->exclude_unencrypted, |
| 979 |
le32_to_cpu(m->wep_icv_error_count), |
| 980 |
le32_to_cpu(m->wep_excluded_count), m->encryption_level, |
| 981 |
m->wep_default_key_id); |
| 982 |
|
| 983 |
key_len = (m->encryption_level == 1) ? |
| 984 |
WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN; |
| 985 |
|
| 986 |
for (i = 0; i < WEP_KEYS; i++) |
| 987 |
at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %*phD", |
| 988 |
wiphy_name(priv->hw->wiphy), i, |
| 989 |
key_len, m->wep_default_keyvalue[i]); |
| 990 |
exit: |
| 991 |
kfree(m); |
| 992 |
} |
| 993 |
|
| 994 |
static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) |
| 995 |
{ |
| 996 |
int ret; |
| 997 |
struct mib_mac_mgmt *m = kmalloc_obj(*m); |
| 998 |
|
| 999 |
if (!m) |
| 1000 |
return; |
| 1001 |
|
| 1002 |
ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m, sizeof(*m)); |
| 1003 |
if (ret < 0) { |
| 1004 |
wiphy_err(priv->hw->wiphy, |
| 1005 |
"at76_get_mib (MAC_MGMT) failed: %d\n", ret); |
| 1006 |
goto exit; |
| 1007 |
} |
| 1008 |
|
| 1009 |
at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration " |
| 1010 |
"%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d " |
| 1011 |
"CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d " |
| 1012 |
"current_bssid %pM current_essid %*phD current_bss_type %d " |
| 1013 |
"pm_mode %d ibss_change %d res %d " |
| 1014 |
"multi_domain_capability_implemented %d " |
| 1015 |
"international_roaming %d country_string %.3s", |
| 1016 |
wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period), |
| 1017 |
le16_to_cpu(m->CFP_max_duration), |
| 1018 |
le16_to_cpu(m->medium_occupancy_limit), |
| 1019 |
le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window), |
| 1020 |
m->CFP_mode, m->privacy_option_implemented, m->DTIM_period, |
| 1021 |
m->CFP_period, m->current_bssid, |
| 1022 |
IW_ESSID_MAX_SIZE, m->current_essid, |
| 1023 |
m->current_bss_type, m->power_mgmt_mode, m->ibss_change, |
| 1024 |
m->res, m->multi_domain_capability_implemented, |
| 1025 |
m->multi_domain_capability_enabled, m->country_string); |
| 1026 |
exit: |
| 1027 |
kfree(m); |
| 1028 |
} |
| 1029 |
|
| 1030 |
static void at76_dump_mib_mac(struct at76_priv *priv) |
| 1031 |
{ |
| 1032 |
int ret; |
| 1033 |
struct mib_mac *m = kmalloc_obj(*m); |
| 1034 |
|
| 1035 |
if (!m) |
| 1036 |
return; |
| 1037 |
|
| 1038 |
ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(*m)); |
| 1039 |
if (ret < 0) { |
| 1040 |
wiphy_err(priv->hw->wiphy, |
| 1041 |
"at76_get_mib (MAC) failed: %d\n", ret); |
| 1042 |
goto exit; |
| 1043 |
} |
| 1044 |
|
| 1045 |
at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d " |
| 1046 |
"max_rx_lifetime %d frag_threshold %d rts_threshold %d " |
| 1047 |
"cwmin %d cwmax %d short_retry_time %d long_retry_time %d " |
| 1048 |
"scan_type %d scan_channel %d probe_delay %u " |
| 1049 |
"min_channel_time %d max_channel_time %d listen_int %d " |
| 1050 |
"desired_ssid %*phD desired_bssid %pM desired_bsstype %d", |
| 1051 |
wiphy_name(priv->hw->wiphy), |
| 1052 |
le32_to_cpu(m->max_tx_msdu_lifetime), |
| 1053 |
le32_to_cpu(m->max_rx_lifetime), |
| 1054 |
le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold), |
| 1055 |
le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax), |
| 1056 |
m->short_retry_time, m->long_retry_time, m->scan_type, |
| 1057 |
m->scan_channel, le16_to_cpu(m->probe_delay), |
| 1058 |
le16_to_cpu(m->min_channel_time), |
| 1059 |
le16_to_cpu(m->max_channel_time), |
| 1060 |
le16_to_cpu(m->listen_interval), |
| 1061 |
IW_ESSID_MAX_SIZE, m->desired_ssid, |
| 1062 |
m->desired_bssid, m->desired_bsstype); |
| 1063 |
exit: |
| 1064 |
kfree(m); |
| 1065 |
} |
| 1066 |
|
| 1067 |
static void at76_dump_mib_phy(struct at76_priv *priv) |
| 1068 |
{ |
| 1069 |
int ret; |
| 1070 |
struct mib_phy *m = kmalloc_obj(*m); |
| 1071 |
|
| 1072 |
if (!m) |
| 1073 |
return; |
| 1074 |
|
| 1075 |
ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(*m)); |
| 1076 |
if (ret < 0) { |
| 1077 |
wiphy_err(priv->hw->wiphy, |
| 1078 |
"at76_get_mib (PHY) failed: %d\n", ret); |
| 1079 |
goto exit; |
| 1080 |
} |
| 1081 |
|
| 1082 |
at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d " |
| 1083 |
"sifs_time %d preamble_length %d plcp_header_length %d " |
| 1084 |
"mpdu_max_length %d cca_mode_supported %d operation_rate_set " |
| 1085 |
"0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d " |
| 1086 |
"phy_type %d current_reg_domain %d", |
| 1087 |
wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold), |
| 1088 |
le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time), |
| 1089 |
le16_to_cpu(m->preamble_length), |
| 1090 |
le16_to_cpu(m->plcp_header_length), |
| 1091 |
le16_to_cpu(m->mpdu_max_length), |
| 1092 |
le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0], |
| 1093 |
m->operation_rate_set[1], m->operation_rate_set[2], |
| 1094 |
m->operation_rate_set[3], m->channel_id, m->current_cca_mode, |
| 1095 |
m->phy_type, m->current_reg_domain); |
| 1096 |
exit: |
| 1097 |
kfree(m); |
| 1098 |
} |
| 1099 |
|
| 1100 |
static void at76_dump_mib_local(struct at76_priv *priv) |
| 1101 |
{ |
| 1102 |
int ret; |
| 1103 |
struct mib_local *m = kmalloc_obj(*m); |
| 1104 |
|
| 1105 |
if (!m) |
| 1106 |
return; |
| 1107 |
|
| 1108 |
ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m)); |
| 1109 |
if (ret < 0) { |
| 1110 |
wiphy_err(priv->hw->wiphy, |
| 1111 |
"at76_get_mib (LOCAL) failed: %d\n", ret); |
| 1112 |
goto exit; |
| 1113 |
} |
| 1114 |
|
| 1115 |
at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d " |
| 1116 |
"txautorate_fallback %d ssid_size %d promiscuous_mode %d " |
| 1117 |
"preamble_type %d", wiphy_name(priv->hw->wiphy), |
| 1118 |
m->beacon_enable, |
| 1119 |
m->txautorate_fallback, m->ssid_size, m->promiscuous_mode, |
| 1120 |
m->preamble_type); |
| 1121 |
exit: |
| 1122 |
kfree(m); |
| 1123 |
} |
| 1124 |
|
| 1125 |
static void at76_dump_mib_mdomain(struct at76_priv *priv) |
| 1126 |
{ |
| 1127 |
int ret; |
| 1128 |
struct mib_mdomain *m = kmalloc_obj(*m); |
| 1129 |
|
| 1130 |
if (!m) |
| 1131 |
return; |
| 1132 |
|
| 1133 |
ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m, sizeof(*m)); |
| 1134 |
if (ret < 0) { |
| 1135 |
wiphy_err(priv->hw->wiphy, |
| 1136 |
"at76_get_mib (MDOMAIN) failed: %d\n", ret); |
| 1137 |
goto exit; |
| 1138 |
} |
| 1139 |
|
| 1140 |
at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %*phD", |
| 1141 |
wiphy_name(priv->hw->wiphy), |
| 1142 |
(int)sizeof(m->channel_list), m->channel_list); |
| 1143 |
|
| 1144 |
at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %*phD", |
| 1145 |
wiphy_name(priv->hw->wiphy), |
| 1146 |
(int)sizeof(m->tx_powerlevel), m->tx_powerlevel); |
| 1147 |
exit: |
| 1148 |
kfree(m); |
| 1149 |
} |
| 1150 |
|
| 1151 |
/* Enable monitor mode */ |
| 1152 |
static int at76_start_monitor(struct at76_priv *priv) |
| 1153 |
{ |
| 1154 |
struct at76_req_scan scan; |
| 1155 |
int ret; |
| 1156 |
|
| 1157 |
memset(&scan, 0, sizeof(struct at76_req_scan)); |
| 1158 |
eth_broadcast_addr(scan.bssid); |
| 1159 |
|
| 1160 |
scan.channel = priv->channel; |
| 1161 |
scan.scan_type = SCAN_TYPE_PASSIVE; |
| 1162 |
scan.international_scan = 0; |
| 1163 |
scan.min_channel_time = cpu_to_le16(priv->scan_min_time); |
| 1164 |
scan.max_channel_time = cpu_to_le16(priv->scan_max_time); |
| 1165 |
scan.probe_delay = cpu_to_le16(0); |
| 1166 |
|
| 1167 |
ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); |
| 1168 |
if (ret >= 0) |
| 1169 |
ret = at76_get_cmd_status(priv->udev, CMD_SCAN); |
| 1170 |
|
| 1171 |
return ret; |
| 1172 |
} |
| 1173 |
|
| 1174 |
/* Calculate padding from txbuf->wlength (which excludes the USB TX header), |
| 1175 |
likely to compensate a flaw in the AT76C503A USB part ... */ |
| 1176 |
static inline int at76_calc_padding(int wlen) |
| 1177 |
{ |
| 1178 |
/* add the USB TX header */ |
| 1179 |
wlen += AT76_TX_HDRLEN; |
| 1180 |
|
| 1181 |
wlen = wlen % 64; |
| 1182 |
|
| 1183 |
if (wlen < 50) |
| 1184 |
return 50 - wlen; |
| 1185 |
|
| 1186 |
if (wlen >= 61) |
| 1187 |
return 64 + 50 - wlen; |
| 1188 |
|
| 1189 |
return 0; |
| 1190 |
} |
| 1191 |
|
| 1192 |
static void at76_rx_callback(struct urb *urb) |
| 1193 |
{ |
| 1194 |
struct at76_priv *priv = urb->context; |
| 1195 |
|
| 1196 |
tasklet_schedule(&priv->rx_tasklet); |
| 1197 |
} |
| 1198 |
|
| 1199 |
static int at76_submit_rx_urb(struct at76_priv *priv) |
| 1200 |
{ |
| 1201 |
int ret; |
| 1202 |
int size; |
| 1203 |
struct sk_buff *skb = priv->rx_skb; |
| 1204 |
|
| 1205 |
if (!priv->rx_urb) { |
| 1206 |
wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n", |
| 1207 |
__func__); |
| 1208 |
return -EFAULT; |
| 1209 |
} |
| 1210 |
|
| 1211 |
if (!skb) { |
| 1212 |
skb = dev_alloc_skb(sizeof(struct at76_rx_buffer)); |
| 1213 |
if (!skb) { |
| 1214 |
wiphy_err(priv->hw->wiphy, |
| 1215 |
"cannot allocate rx skbuff\n"); |
| 1216 |
ret = -ENOMEM; |
| 1217 |
goto exit; |
| 1218 |
} |
| 1219 |
priv->rx_skb = skb; |
| 1220 |
} else { |
| 1221 |
skb_push(skb, skb_headroom(skb)); |
| 1222 |
skb_trim(skb, 0); |
| 1223 |
} |
| 1224 |
|
| 1225 |
size = skb_tailroom(skb); |
| 1226 |
usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe, |
| 1227 |
skb_put(skb, size), size, at76_rx_callback, priv); |
| 1228 |
ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC); |
| 1229 |
if (ret < 0) { |
| 1230 |
if (ret == -ENODEV) |
| 1231 |
at76_dbg(DBG_DEVSTART, |
| 1232 |
"usb_submit_urb returned -ENODEV"); |
| 1233 |
else |
| 1234 |
wiphy_err(priv->hw->wiphy, |
| 1235 |
"rx, usb_submit_urb failed: %d\n", ret); |
| 1236 |
} |
| 1237 |
|
| 1238 |
exit: |
| 1239 |
if (ret < 0 && ret != -ENODEV) |
| 1240 |
wiphy_err(priv->hw->wiphy, |
| 1241 |
"cannot submit rx urb - please unload the driver and/or power cycle the device\n"); |
| 1242 |
|
| 1243 |
return ret; |
| 1244 |
} |
| 1245 |
|
| 1246 |
/* Download external firmware */ |
| 1247 |
static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe) |
| 1248 |
{ |
| 1249 |
int ret; |
| 1250 |
int op_mode; |
| 1251 |
int blockno = 0; |
| 1252 |
int bsize; |
| 1253 |
u8 *block; |
| 1254 |
u8 *buf = fwe->extfw; |
| 1255 |
int size = fwe->extfw_size; |
| 1256 |
|
| 1257 |
if (!buf || !size) |
| 1258 |
return -ENOENT; |
| 1259 |
|
| 1260 |
op_mode = at76_get_op_mode(udev); |
| 1261 |
at76_dbg(DBG_DEVSTART, "opmode %d", op_mode); |
| 1262 |
|
| 1263 |
if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) { |
| 1264 |
dev_err(&udev->dev, "unexpected opmode %d\n", op_mode); |
| 1265 |
return -EINVAL; |
| 1266 |
} |
| 1267 |
|
| 1268 |
block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL); |
| 1269 |
if (!block) |
| 1270 |
return -ENOMEM; |
| 1271 |
|
| 1272 |
at76_dbg(DBG_DEVSTART, "downloading external firmware"); |
| 1273 |
|
| 1274 |
/* for fw >= 0.100, the device needs an extra empty block */ |
| 1275 |
do { |
| 1276 |
bsize = min_t(int, size, FW_BLOCK_SIZE); |
| 1277 |
memcpy(block, buf, bsize); |
| 1278 |
at76_dbg(DBG_DEVSTART, |
| 1279 |
"ext fw, size left = %5d, bsize = %4d, blockno = %2d", |
| 1280 |
size, bsize, blockno); |
| 1281 |
ret = at76_load_ext_fw_block(udev, blockno, block, bsize); |
| 1282 |
if (ret != bsize) { |
| 1283 |
dev_err(&udev->dev, |
| 1284 |
"loading %dth firmware block failed: %d\n", |
| 1285 |
blockno, ret); |
| 1286 |
ret = -EIO; |
| 1287 |
goto exit; |
| 1288 |
} |
| 1289 |
buf += bsize; |
| 1290 |
size -= bsize; |
| 1291 |
blockno++; |
| 1292 |
} while (bsize > 0); |
| 1293 |
|
| 1294 |
if (at76_is_505a(fwe->board_type)) { |
| 1295 |
at76_dbg(DBG_DEVSTART, "200 ms delay for 505a"); |
| 1296 |
schedule_timeout_interruptible(HZ / 5 + 1); |
| 1297 |
} |
| 1298 |
|
| 1299 |
exit: |
| 1300 |
kfree(block); |
| 1301 |
if (ret < 0) |
| 1302 |
dev_err(&udev->dev, |
| 1303 |
"downloading external firmware failed: %d\n", ret); |
| 1304 |
return ret; |
| 1305 |
} |
| 1306 |
|
| 1307 |
/* Download internal firmware */ |
| 1308 |
static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe) |
| 1309 |
{ |
| 1310 |
int ret; |
| 1311 |
int need_remap = !at76_is_505a(fwe->board_type); |
| 1312 |
|
| 1313 |
ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size, |
| 1314 |
need_remap ? 0 : 2 * HZ); |
| 1315 |
|
| 1316 |
if (ret < 0) { |
| 1317 |
dev_err(&udev->dev, |
| 1318 |
"downloading internal fw failed with %d\n", ret); |
| 1319 |
goto exit; |
| 1320 |
} |
| 1321 |
|
| 1322 |
at76_dbg(DBG_DEVSTART, "sending REMAP"); |
| 1323 |
|
| 1324 |
/* no REMAP for 505A (see SF driver) */ |
| 1325 |
if (need_remap) { |
| 1326 |
ret = at76_remap(udev); |
| 1327 |
if (ret < 0) { |
| 1328 |
dev_err(&udev->dev, |
| 1329 |
"sending REMAP failed with %d\n", ret); |
| 1330 |
goto exit; |
| 1331 |
} |
| 1332 |
} |
| 1333 |
|
| 1334 |
at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds"); |
| 1335 |
schedule_timeout_interruptible(2 * HZ + 1); |
| 1336 |
usb_reset_device(udev); |
| 1337 |
|
| 1338 |
exit: |
| 1339 |
return ret; |
| 1340 |
} |
| 1341 |
|
| 1342 |
static int at76_startup_device(struct at76_priv *priv) |
| 1343 |
{ |
| 1344 |
struct at76_card_config *ccfg = &priv->card_config; |
| 1345 |
int ret; |
| 1346 |
|
| 1347 |
at76_dbg(DBG_PARAMS, |
| 1348 |
"%s param: ssid %.*s (%*phD) mode %s ch %d wep %s key %d " |
| 1349 |
"keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size, |
| 1350 |
priv->essid, IW_ESSID_MAX_SIZE, priv->essid, |
| 1351 |
priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra", |
| 1352 |
priv->channel, priv->wep_enabled ? "enabled" : "disabled", |
| 1353 |
priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]); |
| 1354 |
at76_dbg(DBG_PARAMS, |
| 1355 |
"%s param: preamble %s rts %d retry %d frag %d " |
| 1356 |
"txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy), |
| 1357 |
preambles[priv->preamble_type], priv->rts_threshold, |
| 1358 |
priv->short_retry_limit, priv->frag_threshold, |
| 1359 |
priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate == |
| 1360 |
TX_RATE_2MBIT ? "2MBit" : priv->txrate == |
| 1361 |
TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate == |
| 1362 |
TX_RATE_11MBIT ? "11MBit" : priv->txrate == |
| 1363 |
TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode); |
| 1364 |
at76_dbg(DBG_PARAMS, |
| 1365 |
"%s param: pm_mode %d pm_period %d auth_mode %s " |
| 1366 |
"scan_times %d %d scan_mode %s", |
| 1367 |
wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period, |
| 1368 |
priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret", |
| 1369 |
priv->scan_min_time, priv->scan_max_time, |
| 1370 |
priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive"); |
| 1371 |
|
| 1372 |
memset(ccfg, 0, sizeof(*ccfg)); |
| 1373 |
ccfg->promiscuous_mode = 0; |
| 1374 |
ccfg->short_retry_limit = priv->short_retry_limit; |
| 1375 |
|
| 1376 |
if (priv->wep_enabled) { |
| 1377 |
if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN) |
| 1378 |
ccfg->encryption_type = 2; |
| 1379 |
else |
| 1380 |
ccfg->encryption_type = 1; |
| 1381 |
|
| 1382 |
/* jal: always exclude unencrypted if WEP is active */ |
| 1383 |
ccfg->exclude_unencrypted = 1; |
| 1384 |
} else { |
| 1385 |
ccfg->exclude_unencrypted = 0; |
| 1386 |
ccfg->encryption_type = 0; |
| 1387 |
} |
| 1388 |
|
| 1389 |
ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold); |
| 1390 |
ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold); |
| 1391 |
|
| 1392 |
memcpy(ccfg->basic_rate_set, hw_rates, 4); |
| 1393 |
/* jal: really needed, we do a set_mib for autorate later ??? */ |
| 1394 |
ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0); |
| 1395 |
ccfg->channel = priv->channel; |
| 1396 |
ccfg->privacy_invoked = priv->wep_enabled; |
| 1397 |
memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE); |
| 1398 |
ccfg->ssid_len = priv->essid_size; |
| 1399 |
|
| 1400 |
ccfg->wep_default_key_id = priv->wep_key_id; |
| 1401 |
memcpy(ccfg->wep_default_key_value, priv->wep_keys, |
| 1402 |
sizeof(priv->wep_keys)); |
| 1403 |
|
| 1404 |
ccfg->short_preamble = priv->preamble_type; |
| 1405 |
ccfg->beacon_period = cpu_to_le16(priv->beacon_period); |
| 1406 |
|
| 1407 |
ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config, |
| 1408 |
sizeof(*ccfg)); |
| 1409 |
if (ret < 0) { |
| 1410 |
wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n", |
| 1411 |
ret); |
| 1412 |
return ret; |
| 1413 |
} |
| 1414 |
|
| 1415 |
at76_wait_completion(priv, CMD_STARTUP); |
| 1416 |
|
| 1417 |
/* remove BSSID from previous run */ |
| 1418 |
eth_zero_addr(priv->bssid); |
| 1419 |
|
| 1420 |
priv->scanning = false; |
| 1421 |
|
| 1422 |
if (at76_set_radio(priv, 1) == 1) |
| 1423 |
at76_wait_completion(priv, CMD_RADIO_ON); |
| 1424 |
|
| 1425 |
ret = at76_set_preamble(priv, priv->preamble_type); |
| 1426 |
if (ret < 0) |
| 1427 |
return ret; |
| 1428 |
|
| 1429 |
ret = at76_set_frag(priv, priv->frag_threshold); |
| 1430 |
if (ret < 0) |
| 1431 |
return ret; |
| 1432 |
|
| 1433 |
ret = at76_set_rts(priv, priv->rts_threshold); |
| 1434 |
if (ret < 0) |
| 1435 |
return ret; |
| 1436 |
|
| 1437 |
ret = at76_set_autorate_fallback(priv, |
| 1438 |
priv->txrate == TX_RATE_AUTO ? 1 : 0); |
| 1439 |
if (ret < 0) |
| 1440 |
return ret; |
| 1441 |
|
| 1442 |
ret = at76_set_pm_mode(priv); |
| 1443 |
if (ret < 0) |
| 1444 |
return ret; |
| 1445 |
|
| 1446 |
if (at76_debug & DBG_MIB) { |
| 1447 |
at76_dump_mib_mac(priv); |
| 1448 |
at76_dump_mib_mac_addr(priv); |
| 1449 |
at76_dump_mib_mac_mgmt(priv); |
| 1450 |
at76_dump_mib_mac_wep(priv); |
| 1451 |
at76_dump_mib_mdomain(priv); |
| 1452 |
at76_dump_mib_phy(priv); |
| 1453 |
at76_dump_mib_local(priv); |
| 1454 |
} |
| 1455 |
|
| 1456 |
return 0; |
| 1457 |
} |
| 1458 |
|
| 1459 |
/* Enable or disable promiscuous mode */ |
| 1460 |
static void at76_work_set_promisc(struct work_struct *work) |
| 1461 |
{ |
| 1462 |
struct at76_priv *priv = container_of(work, struct at76_priv, |
| 1463 |
work_set_promisc); |
| 1464 |
int ret = 0; |
| 1465 |
|
| 1466 |
if (priv->device_unplugged) |
| 1467 |
return; |
| 1468 |
|
| 1469 |
mutex_lock(&priv->mtx); |
| 1470 |
|
| 1471 |
priv->mib_buf.type = MIB_LOCAL; |
| 1472 |
priv->mib_buf.size = 1; |
| 1473 |
priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode); |
| 1474 |
priv->mib_buf.data.byte = priv->promisc ? 1 : 0; |
| 1475 |
|
| 1476 |
ret = at76_set_mib(priv, &priv->mib_buf); |
| 1477 |
if (ret < 0) |
| 1478 |
wiphy_err(priv->hw->wiphy, |
| 1479 |
"set_mib (promiscuous_mode) failed: %d\n", ret); |
| 1480 |
|
| 1481 |
mutex_unlock(&priv->mtx); |
| 1482 |
} |
| 1483 |
|
| 1484 |
/* Submit Rx urb back to the device */ |
| 1485 |
static void at76_work_submit_rx(struct work_struct *work) |
| 1486 |
{ |
| 1487 |
struct at76_priv *priv = container_of(work, struct at76_priv, |
| 1488 |
work_submit_rx); |
| 1489 |
|
| 1490 |
mutex_lock(&priv->mtx); |
| 1491 |
at76_submit_rx_urb(priv); |
| 1492 |
mutex_unlock(&priv->mtx); |
| 1493 |
} |
| 1494 |
|
| 1495 |
/* This is a workaround to make scan working: |
| 1496 |
* currently mac80211 does not process frames with no frequency |
| 1497 |
* information. |
| 1498 |
* However during scan the HW performs a sweep by itself, and we |
| 1499 |
* are unable to know where the radio is actually tuned. |
| 1500 |
* This function tries to do its best to guess this information.. |
| 1501 |
* During scan, If the current frame is a beacon or a probe response, |
| 1502 |
* the channel information is extracted from it. |
| 1503 |
* When not scanning, for other frames, or if it happens that for |
| 1504 |
* whatever reason we fail to parse beacons and probe responses, this |
| 1505 |
* function returns the priv->channel information, that should be correct |
| 1506 |
* at least when we are not scanning. |
| 1507 |
*/ |
| 1508 |
static inline int at76_guess_freq(struct at76_priv *priv) |
| 1509 |
{ |
| 1510 |
size_t el_off; |
| 1511 |
const u8 *el; |
| 1512 |
int channel = priv->channel; |
| 1513 |
int len = priv->rx_skb->len; |
| 1514 |
struct ieee80211_hdr *hdr = (void *)priv->rx_skb->data; |
| 1515 |
|
| 1516 |
if (!priv->scanning) |
| 1517 |
goto exit; |
| 1518 |
|
| 1519 |
if (len < 24) |
| 1520 |
goto exit; |
| 1521 |
|
| 1522 |
if (ieee80211_is_probe_resp(hdr->frame_control)) { |
| 1523 |
el_off = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); |
| 1524 |
el = ((struct ieee80211_mgmt *)hdr)->u.probe_resp.variable; |
| 1525 |
} else if (ieee80211_is_beacon(hdr->frame_control)) { |
| 1526 |
el_off = offsetof(struct ieee80211_mgmt, u.beacon.variable); |
| 1527 |
el = ((struct ieee80211_mgmt *)hdr)->u.beacon.variable; |
| 1528 |
} else { |
| 1529 |
goto exit; |
| 1530 |
} |
| 1531 |
len -= el_off; |
| 1532 |
|
| 1533 |
el = cfg80211_find_ie(WLAN_EID_DS_PARAMS, el, len); |
| 1534 |
if (el && el[1] > 0) |
| 1535 |
channel = el[2]; |
| 1536 |
|
| 1537 |
exit: |
| 1538 |
return ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ); |
| 1539 |
} |
| 1540 |
|
| 1541 |
static void at76_rx_tasklet(struct tasklet_struct *t) |
| 1542 |
{ |
| 1543 |
struct at76_priv *priv = from_tasklet(priv, t, rx_tasklet); |
| 1544 |
struct urb *urb = priv->rx_urb; |
| 1545 |
struct at76_rx_buffer *buf; |
| 1546 |
struct ieee80211_rx_status rx_status = { 0 }; |
| 1547 |
|
| 1548 |
if (priv->device_unplugged) { |
| 1549 |
at76_dbg(DBG_DEVSTART, "device unplugged"); |
| 1550 |
at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); |
| 1551 |
return; |
| 1552 |
} |
| 1553 |
|
| 1554 |
if (!priv->rx_skb || !priv->rx_skb->data) |
| 1555 |
return; |
| 1556 |
|
| 1557 |
buf = (struct at76_rx_buffer *)priv->rx_skb->data; |
| 1558 |
|
| 1559 |
if (urb->status != 0) { |
| 1560 |
if (urb->status != -ENOENT && urb->status != -ECONNRESET) |
| 1561 |
at76_dbg(DBG_URB, |
| 1562 |
"%s %s: - nonzero Rx bulk status received: %d", |
| 1563 |
__func__, wiphy_name(priv->hw->wiphy), |
| 1564 |
urb->status); |
| 1565 |
return; |
| 1566 |
} |
| 1567 |
|
| 1568 |
at76_dbg(DBG_RX_ATMEL_HDR, |
| 1569 |
"%s: rx frame: rate %d rssi %d noise %d link %d", |
| 1570 |
wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi, |
| 1571 |
buf->noise_level, buf->link_quality); |
| 1572 |
|
| 1573 |
skb_pull(priv->rx_skb, AT76_RX_HDRLEN); |
| 1574 |
skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength)); |
| 1575 |
at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data, |
| 1576 |
priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len); |
| 1577 |
|
| 1578 |
rx_status.signal = buf->rssi; |
| 1579 |
rx_status.flag |= RX_FLAG_DECRYPTED; |
| 1580 |
rx_status.flag |= RX_FLAG_IV_STRIPPED; |
| 1581 |
rx_status.band = NL80211_BAND_2GHZ; |
| 1582 |
rx_status.freq = at76_guess_freq(priv); |
| 1583 |
|
| 1584 |
at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d", |
| 1585 |
priv->rx_skb->len, priv->rx_skb->data_len); |
| 1586 |
memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status)); |
| 1587 |
ieee80211_rx_irqsafe(priv->hw, priv->rx_skb); |
| 1588 |
|
| 1589 |
/* Use a new skb for the next receive */ |
| 1590 |
priv->rx_skb = NULL; |
| 1591 |
|
| 1592 |
at76_submit_rx_urb(priv); |
| 1593 |
} |
| 1594 |
|
| 1595 |
/* Load firmware into kernel memory and parse it */ |
| 1596 |
static struct fwentry *at76_load_firmware(struct usb_device *udev, |
| 1597 |
enum board_type board_type) |
| 1598 |
{ |
| 1599 |
int ret; |
| 1600 |
char *str; |
| 1601 |
struct at76_fw_header *fwh; |
| 1602 |
struct fwentry *fwe = &firmwares[board_type]; |
| 1603 |
|
| 1604 |
mutex_lock(&fw_mutex); |
| 1605 |
|
| 1606 |
if (fwe->loaded) { |
| 1607 |
at76_dbg(DBG_FW, "re-using previously loaded fw"); |
| 1608 |
goto exit; |
| 1609 |
} |
| 1610 |
|
| 1611 |
at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); |
| 1612 |
ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); |
| 1613 |
if (ret < 0) { |
| 1614 |
dev_err(&udev->dev, "firmware %s not found!\n", |
| 1615 |
fwe->fwname); |
| 1616 |
dev_err(&udev->dev, |
| 1617 |
"you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n"); |
| 1618 |
goto exit; |
| 1619 |
} |
| 1620 |
|
| 1621 |
at76_dbg(DBG_FW, "got it."); |
| 1622 |
fwh = (struct at76_fw_header *)(fwe->fw->data); |
| 1623 |
|
| 1624 |
if (fwe->fw->size <= sizeof(*fwh)) { |
| 1625 |
dev_err(&udev->dev, |
| 1626 |
"firmware is too short (0x%zx)\n", fwe->fw->size); |
| 1627 |
goto exit; |
| 1628 |
} |
| 1629 |
|
| 1630 |
/* CRC currently not checked */ |
| 1631 |
fwe->board_type = le32_to_cpu(fwh->board_type); |
| 1632 |
if (fwe->board_type != board_type) { |
| 1633 |
dev_err(&udev->dev, |
| 1634 |
"board type mismatch, requested %u, got %u\n", |
| 1635 |
board_type, fwe->board_type); |
| 1636 |
goto exit; |
| 1637 |
} |
| 1638 |
|
| 1639 |
fwe->fw_version.major = fwh->major; |
| 1640 |
fwe->fw_version.minor = fwh->minor; |
| 1641 |
fwe->fw_version.patch = fwh->patch; |
| 1642 |
fwe->fw_version.build = fwh->build; |
| 1643 |
|
| 1644 |
str = (char *)fwh + le32_to_cpu(fwh->str_offset); |
| 1645 |
fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); |
| 1646 |
fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); |
| 1647 |
fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); |
| 1648 |
fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); |
| 1649 |
|
| 1650 |
fwe->loaded = 1; |
| 1651 |
|
| 1652 |
dev_printk(KERN_DEBUG, &udev->dev, |
| 1653 |
"using firmware %s (version %d.%d.%d-%d)\n", |
| 1654 |
fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); |
| 1655 |
|
| 1656 |
at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, |
| 1657 |
le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), |
| 1658 |
le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); |
| 1659 |
at76_dbg(DBG_DEVSTART, "firmware id %s", str); |
| 1660 |
|
| 1661 |
exit: |
| 1662 |
mutex_unlock(&fw_mutex); |
| 1663 |
|
| 1664 |
if (fwe->loaded) |
| 1665 |
return fwe; |
| 1666 |
else |
| 1667 |
return NULL; |
| 1668 |
} |
| 1669 |
|
| 1670 |
static int at76_join(struct at76_priv *priv) |
| 1671 |
{ |
| 1672 |
struct at76_req_join join; |
| 1673 |
int ret; |
| 1674 |
|
| 1675 |
memset(&join, 0, sizeof(struct at76_req_join)); |
| 1676 |
memcpy(join.essid, priv->essid, priv->essid_size); |
| 1677 |
join.essid_size = priv->essid_size; |
| 1678 |
memcpy(join.bssid, priv->bssid, ETH_ALEN); |
| 1679 |
join.bss_type = INFRASTRUCTURE_MODE; |
| 1680 |
join.channel = priv->channel; |
| 1681 |
join.timeout = cpu_to_le16(2000); |
| 1682 |
|
| 1683 |
at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__); |
| 1684 |
ret = at76_set_card_command(priv->udev, CMD_JOIN, &join, |
| 1685 |
sizeof(struct at76_req_join)); |
| 1686 |
|
| 1687 |
if (ret < 0) { |
| 1688 |
wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n", |
| 1689 |
ret); |
| 1690 |
return 0; |
| 1691 |
} |
| 1692 |
|
| 1693 |
ret = at76_wait_completion(priv, CMD_JOIN); |
| 1694 |
at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret); |
| 1695 |
if (ret != CMD_STATUS_COMPLETE) { |
| 1696 |
wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n", |
| 1697 |
ret); |
| 1698 |
return 0; |
| 1699 |
} |
| 1700 |
|
| 1701 |
at76_set_pm_mode(priv); |
| 1702 |
|
| 1703 |
return 0; |
| 1704 |
} |
| 1705 |
|
| 1706 |
static void at76_work_join_bssid(struct work_struct *work) |
| 1707 |
{ |
| 1708 |
struct at76_priv *priv = container_of(work, struct at76_priv, |
| 1709 |
work_join_bssid); |
| 1710 |
|
| 1711 |
if (priv->device_unplugged) |
| 1712 |
return; |
| 1713 |
|
| 1714 |
mutex_lock(&priv->mtx); |
| 1715 |
|
| 1716 |
if (is_valid_ether_addr(priv->bssid)) |
| 1717 |
at76_join(priv); |
| 1718 |
|
| 1719 |
mutex_unlock(&priv->mtx); |
| 1720 |
} |
| 1721 |
|
| 1722 |
static void at76_mac80211_tx_callback(struct urb *urb) |
| 1723 |
{ |
| 1724 |
struct at76_priv *priv = urb->context; |
| 1725 |
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); |
| 1726 |
|
| 1727 |
at76_dbg(DBG_MAC80211, "%s()", __func__); |
| 1728 |
|
| 1729 |
switch (urb->status) { |
| 1730 |
case 0: |
| 1731 |
/* success */ |
| 1732 |
info->flags |= IEEE80211_TX_STAT_ACK; |
| 1733 |
break; |
| 1734 |
case -ENOENT: |
| 1735 |
case -ECONNRESET: |
| 1736 |
/* fail, urb has been unlinked */ |
| 1737 |
/* FIXME: add error message */ |
| 1738 |
break; |
| 1739 |
default: |
| 1740 |
at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", |
| 1741 |
__func__, urb->status); |
| 1742 |
break; |
| 1743 |
} |
| 1744 |
|
| 1745 |
memset(&info->status, 0, sizeof(info->status)); |
| 1746 |
|
| 1747 |
ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb); |
| 1748 |
|
| 1749 |
priv->tx_skb = NULL; |
| 1750 |
|
| 1751 |
ieee80211_wake_queues(priv->hw); |
| 1752 |
} |
| 1753 |
|
| 1754 |
static void at76_mac80211_tx(struct ieee80211_hw *hw, |
| 1755 |
struct ieee80211_tx_control *control, |
| 1756 |
struct sk_buff *skb) |
| 1757 |
{ |
| 1758 |
struct at76_priv *priv = hw->priv; |
| 1759 |
struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; |
| 1760 |
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| 1761 |
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; |
| 1762 |
int padding, submit_len, ret; |
| 1763 |
|
| 1764 |
at76_dbg(DBG_MAC80211, "%s()", __func__); |
| 1765 |
|
| 1766 |
if (priv->tx_urb->status == -EINPROGRESS) { |
| 1767 |
wiphy_err(priv->hw->wiphy, |
| 1768 |
"%s called while tx urb is pending\n", __func__); |
| 1769 |
dev_kfree_skb_any(skb); |
| 1770 |
return; |
| 1771 |
} |
| 1772 |
|
| 1773 |
/* The following code lines are important when the device is going to |
| 1774 |
* authenticate with a new bssid. The driver must send CMD_JOIN before |
| 1775 |
* an authentication frame is transmitted. For this to succeed, the |
| 1776 |
* correct bssid of the AP must be known. As mac80211 does not inform |
| 1777 |
* drivers about the bssid prior to the authentication process the |
| 1778 |
* following workaround is necessary. If the TX frame is an |
| 1779 |
* authentication frame extract the bssid and send the CMD_JOIN. */ |
| 1780 |
if (mgmt->frame_control & cpu_to_le16(IEEE80211_STYPE_AUTH)) { |
| 1781 |
if (!ether_addr_equal_64bits(priv->bssid, mgmt->bssid)) { |
| 1782 |
memcpy(priv->bssid, mgmt->bssid, ETH_ALEN); |
| 1783 |
ieee80211_queue_work(hw, &priv->work_join_bssid); |
| 1784 |
dev_kfree_skb_any(skb); |
| 1785 |
return; |
| 1786 |
} |
| 1787 |
} |
| 1788 |
|
| 1789 |
ieee80211_stop_queues(hw); |
| 1790 |
|
| 1791 |
at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ |
| 1792 |
|
| 1793 |
WARN_ON(priv->tx_skb != NULL); |
| 1794 |
|
| 1795 |
priv->tx_skb = skb; |
| 1796 |
padding = at76_calc_padding(skb->len); |
| 1797 |
submit_len = AT76_TX_HDRLEN + skb->len + padding; |
| 1798 |
|
| 1799 |
/* setup 'Atmel' header */ |
| 1800 |
memset(tx_buffer, 0, sizeof(*tx_buffer)); |
| 1801 |
tx_buffer->padding = padding; |
| 1802 |
tx_buffer->wlength = cpu_to_le16(skb->len); |
| 1803 |
tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value; |
| 1804 |
memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); |
| 1805 |
memcpy(tx_buffer->packet, skb->data, skb->len); |
| 1806 |
|
| 1807 |
at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr", |
| 1808 |
wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength), |
| 1809 |
tx_buffer->padding, tx_buffer->tx_rate); |
| 1810 |
|
| 1811 |
/* send stuff */ |
| 1812 |
at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len, |
| 1813 |
"%s(): tx_buffer %d bytes:", __func__, submit_len); |
| 1814 |
usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, |
| 1815 |
submit_len, at76_mac80211_tx_callback, priv); |
| 1816 |
ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); |
| 1817 |
if (ret) { |
| 1818 |
wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret); |
| 1819 |
if (ret == -EINVAL) |
| 1820 |
wiphy_err(priv->hw->wiphy, |
| 1821 |
"-EINVAL: tx urb %p hcpriv %p complete %p\n", |
| 1822 |
priv->tx_urb, |
| 1823 |
priv->tx_urb->hcpriv, priv->tx_urb->complete); |
| 1824 |
} |
| 1825 |
} |
| 1826 |
|
| 1827 |
static int at76_mac80211_start(struct ieee80211_hw *hw) |
| 1828 |
{ |
| 1829 |
struct at76_priv *priv = hw->priv; |
| 1830 |
int ret; |
| 1831 |
|
| 1832 |
at76_dbg(DBG_MAC80211, "%s()", __func__); |
| 1833 |
|
| 1834 |
mutex_lock(&priv->mtx); |
| 1835 |
|
| 1836 |
ret = at76_submit_rx_urb(priv); |
| 1837 |
if (ret < 0) { |
| 1838 |
wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n", |
| 1839 |
ret); |
| 1840 |
goto error; |
| 1841 |
} |
| 1842 |
|
| 1843 |
at76_startup_device(priv); |
| 1844 |
|
| 1845 |
at76_start_monitor(priv); |
| 1846 |
|
| 1847 |
error: |
| 1848 |
mutex_unlock(&priv->mtx); |
| 1849 |
|
| 1850 |
return 0; |
| 1851 |
} |
| 1852 |
|
| 1853 |
static void at76_mac80211_stop(struct ieee80211_hw *hw, bool suspend) |
| 1854 |
{ |
| 1855 |
struct at76_priv *priv = hw->priv; |
| 1856 |
|
| 1857 |
at76_dbg(DBG_MAC80211, "%s()", __func__); |
| 1858 |
|
| 1859 |
cancel_delayed_work(&priv->dwork_hw_scan); |
| 1860 |
cancel_work_sync(&priv->work_join_bssid); |
| 1861 |
cancel_work_sync(&priv->work_set_promisc); |
| 1862 |
|
| 1863 |
mutex_lock(&priv->mtx); |
| 1864 |
|
| 1865 |
if (!priv->device_unplugged) { |
| 1866 |
/* We are called by "ifconfig ethX down", not because the |
| 1867 |
* device is not available anymore. */ |
| 1868 |
at76_set_radio(priv, 0); |
| 1869 |
|
| 1870 |
/* We unlink rx_urb because at76_open() re-submits it. |
| 1871 |
* If unplugged, at76_delete_device() takes care of it. */ |
| 1872 |
usb_kill_urb(priv->rx_urb); |
| 1873 |
} |
| 1874 |
|
| 1875 |
mutex_unlock(&priv->mtx); |
| 1876 |
} |
| 1877 |
|
| 1878 |
static int at76_add_interface(struct ieee80211_hw *hw, |
| 1879 |
struct ieee80211_vif *vif) |
| 1880 |
{ |
| 1881 |
struct at76_priv *priv = hw->priv; |
| 1882 |
int ret = 0; |
| 1883 |
|
| 1884 |
at76_dbg(DBG_MAC80211, "%s()", __func__); |
| 1885 |
|
| 1886 |
mutex_lock(&priv->mtx); |
| 1887 |
|
| 1888 |
switch (vif->type) { |
| 1889 |
case NL80211_IFTYPE_STATION: |
| 1890 |
priv->iw_mode = IW_MODE_INFRA; |
| 1891 |
break; |
| 1892 |
default: |
| 1893 |
ret = -EOPNOTSUPP; |
| 1894 |
goto exit; |
| 1895 |
} |
| 1896 |
|
| 1897 |
exit: |
| 1898 |
mutex_unlock(&priv->mtx); |
| 1899 |
|
| 1900 |
return ret; |
| 1901 |
} |
| 1902 |
|
| 1903 |
static void at76_remove_interface(struct ieee80211_hw *hw, |
| 1904 |
struct ieee80211_vif *vif) |
| 1905 |
{ |
| 1906 |
at76_dbg(DBG_MAC80211, "%s()", __func__); |
| 1907 |
} |
| 1908 |
|
| 1909 |
static void at76_dwork_hw_scan(struct work_struct *work) |
| 1910 |
{ |
| 1911 |
struct at76_priv *priv = container_of(work, struct at76_priv, |
| 1912 |
dwork_hw_scan.work); |
| 1913 |
struct cfg80211_scan_info info = { |
| 1914 |
.aborted = false, |
| 1915 |
}; |
| 1916 |
int ret; |
| 1917 |
|
| 1918 |
if (priv->device_unplugged) |
| 1919 |
return; |
| 1920 |
|
| 1921 |
mutex_lock(&priv->mtx); |
| 1922 |
|
| 1923 |
ret = at76_get_cmd_status(priv->udev, CMD_SCAN); |
| 1924 |
at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret); |
| 1925 |
|
| 1926 |
/* FIXME: add maximum time for scan to complete */ |
| 1927 |
|
| 1928 |
if (ret != CMD_STATUS_COMPLETE) { |
| 1929 |
ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan, |
| 1930 |
SCAN_POLL_INTERVAL); |
| 1931 |
mutex_unlock(&priv->mtx); |
| 1932 |
return; |
| 1933 |
} |
| 1934 |
|
| 1935 |
if (is_valid_ether_addr(priv->bssid)) |
| 1936 |
at76_join(priv); |
| 1937 |
|
| 1938 |
priv->scanning = false; |
| 1939 |
|
| 1940 |
mutex_unlock(&priv->mtx); |
| 1941 |
|
| 1942 |
ieee80211_scan_completed(priv->hw, &info); |
| 1943 |
|
| 1944 |
ieee80211_wake_queues(priv->hw); |
| 1945 |
} |
| 1946 |
|
| 1947 |
static int at76_hw_scan(struct ieee80211_hw *hw, |
| 1948 |
struct ieee80211_vif *vif, |
| 1949 |
struct ieee80211_scan_request *hw_req) |
| 1950 |
{ |
| 1951 |
struct cfg80211_scan_request *req = &hw_req->req; |
| 1952 |
struct at76_priv *priv = hw->priv; |
| 1953 |
struct at76_req_scan scan; |
| 1954 |
u8 *ssid = NULL; |
| 1955 |
int ret, len = 0; |
| 1956 |
|
| 1957 |
at76_dbg(DBG_MAC80211, "%s():", __func__); |
| 1958 |
|
| 1959 |
if (priv->device_unplugged) |
| 1960 |
return 0; |
| 1961 |
|
| 1962 |
mutex_lock(&priv->mtx); |
| 1963 |
|
| 1964 |
ieee80211_stop_queues(hw); |
| 1965 |
|
| 1966 |
memset(&scan, 0, sizeof(struct at76_req_scan)); |
| 1967 |
eth_broadcast_addr(scan.bssid); |
| 1968 |
|
| 1969 |
if (req->n_ssids) { |
| 1970 |
scan.scan_type = SCAN_TYPE_ACTIVE; |
| 1971 |
ssid = req->ssids[0].ssid; |
| 1972 |
len = req->ssids[0].ssid_len; |
| 1973 |
} else { |
| 1974 |
scan.scan_type = SCAN_TYPE_PASSIVE; |
| 1975 |
} |
| 1976 |
|
| 1977 |
if (len) { |
| 1978 |
memcpy(scan.essid, ssid, len); |
| 1979 |
scan.essid_size = len; |
| 1980 |
} |
| 1981 |
|
| 1982 |
scan.min_channel_time = cpu_to_le16(priv->scan_min_time); |
| 1983 |
scan.max_channel_time = cpu_to_le16(priv->scan_max_time); |
| 1984 |
scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); |
| 1985 |
scan.international_scan = 0; |
| 1986 |
|
| 1987 |
at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__); |
| 1988 |
ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); |
| 1989 |
|
| 1990 |
if (ret < 0) { |
| 1991 |
wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret); |
| 1992 |
goto exit; |
| 1993 |
} |
| 1994 |
|
| 1995 |
priv->scanning = true; |
| 1996 |
ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan, |
| 1997 |
SCAN_POLL_INTERVAL); |
| 1998 |
|
| 1999 |
exit: |
| 2000 |
mutex_unlock(&priv->mtx); |
| 2001 |
|
| 2002 |
return 0; |
| 2003 |
} |
| 2004 |
|
| 2005 |
static int at76_config(struct ieee80211_hw *hw, int radio_idx, u32 changed) |
| 2006 |
{ |
| 2007 |
struct at76_priv *priv = hw->priv; |
| 2008 |
|
| 2009 |
at76_dbg(DBG_MAC80211, "%s(): channel %d", |
| 2010 |
__func__, hw->conf.chandef.chan->hw_value); |
| 2011 |
at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:"); |
| 2012 |
|
| 2013 |
mutex_lock(&priv->mtx); |
| 2014 |
|
| 2015 |
priv->channel = hw->conf.chandef.chan->hw_value; |
| 2016 |
|
| 2017 |
if (is_valid_ether_addr(priv->bssid)) |
| 2018 |
at76_join(priv); |
| 2019 |
else |
| 2020 |
at76_start_monitor(priv); |
| 2021 |
|
| 2022 |
mutex_unlock(&priv->mtx); |
| 2023 |
|
| 2024 |
return 0; |
| 2025 |
} |
| 2026 |
|
| 2027 |
static void at76_bss_info_changed(struct ieee80211_hw *hw, |
| 2028 |
struct ieee80211_vif *vif, |
| 2029 |
struct ieee80211_bss_conf *conf, |
| 2030 |
u64 changed) |
| 2031 |
{ |
| 2032 |
struct at76_priv *priv = hw->priv; |
| 2033 |
|
| 2034 |
at76_dbg(DBG_MAC80211, "%s():", __func__); |
| 2035 |
|
| 2036 |
if (!(changed & BSS_CHANGED_BSSID)) |
| 2037 |
return; |
| 2038 |
|
| 2039 |
at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:"); |
| 2040 |
|
| 2041 |
mutex_lock(&priv->mtx); |
| 2042 |
|
| 2043 |
memcpy(priv->bssid, conf->bssid, ETH_ALEN); |
| 2044 |
|
| 2045 |
if (is_valid_ether_addr(priv->bssid)) |
| 2046 |
/* mac80211 is joining a bss */ |
| 2047 |
at76_join(priv); |
| 2048 |
|
| 2049 |
mutex_unlock(&priv->mtx); |
| 2050 |
} |
| 2051 |
|
| 2052 |
/* must be atomic */ |
| 2053 |
static void at76_configure_filter(struct ieee80211_hw *hw, |
| 2054 |
unsigned int changed_flags, |
| 2055 |
unsigned int *total_flags, u64 multicast) |
| 2056 |
{ |
| 2057 |
struct at76_priv *priv = hw->priv; |
| 2058 |
int flags; |
| 2059 |
|
| 2060 |
at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x " |
| 2061 |
"total_flags=0x%08x", |
| 2062 |
__func__, changed_flags, *total_flags); |
| 2063 |
|
| 2064 |
flags = changed_flags & AT76_SUPPORTED_FILTERS; |
| 2065 |
*total_flags = AT76_SUPPORTED_FILTERS; |
| 2066 |
|
| 2067 |
/* Bail out after updating flags to prevent a WARN_ON in mac80211. */ |
| 2068 |
if (priv->device_unplugged) |
| 2069 |
return; |
| 2070 |
|
| 2071 |
/* FIXME: access to priv->promisc should be protected with |
| 2072 |
* priv->mtx, but it's impossible because this function needs to be |
| 2073 |
* atomic */ |
| 2074 |
|
| 2075 |
if (flags && !priv->promisc) { |
| 2076 |
/* mac80211 wants us to enable promiscuous mode */ |
| 2077 |
priv->promisc = 1; |
| 2078 |
} else if (!flags && priv->promisc) { |
| 2079 |
/* we need to disable promiscuous mode */ |
| 2080 |
priv->promisc = 0; |
| 2081 |
} else |
| 2082 |
return; |
| 2083 |
|
| 2084 |
ieee80211_queue_work(hw, &priv->work_set_promisc); |
| 2085 |
} |
| 2086 |
|
| 2087 |
static int at76_set_wep(struct at76_priv *priv) |
| 2088 |
{ |
| 2089 |
int ret = 0; |
| 2090 |
struct mib_mac_wep *mib_data = &priv->mib_buf.data.wep_mib; |
| 2091 |
|
| 2092 |
priv->mib_buf.type = MIB_MAC_WEP; |
| 2093 |
priv->mib_buf.size = sizeof(struct mib_mac_wep); |
| 2094 |
priv->mib_buf.index = 0; |
| 2095 |
|
| 2096 |
memset(mib_data, 0, sizeof(*mib_data)); |
| 2097 |
|
| 2098 |
if (priv->wep_enabled) { |
| 2099 |
if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN) |
| 2100 |
mib_data->encryption_level = 2; |
| 2101 |
else |
| 2102 |
mib_data->encryption_level = 1; |
| 2103 |
|
| 2104 |
/* always exclude unencrypted if WEP is active */ |
| 2105 |
mib_data->exclude_unencrypted = 1; |
| 2106 |
} else { |
| 2107 |
mib_data->exclude_unencrypted = 0; |
| 2108 |
mib_data->encryption_level = 0; |
| 2109 |
} |
| 2110 |
|
| 2111 |
mib_data->privacy_invoked = priv->wep_enabled; |
| 2112 |
mib_data->wep_default_key_id = priv->wep_key_id; |
| 2113 |
memcpy(mib_data->wep_default_keyvalue, priv->wep_keys, |
| 2114 |
sizeof(priv->wep_keys)); |
| 2115 |
|
| 2116 |
ret = at76_set_mib(priv, &priv->mib_buf); |
| 2117 |
|
| 2118 |
if (ret < 0) |
| 2119 |
wiphy_err(priv->hw->wiphy, |
| 2120 |
"set_mib (wep) failed: %d\n", ret); |
| 2121 |
|
| 2122 |
return ret; |
| 2123 |
} |
| 2124 |
|
| 2125 |
static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
| 2126 |
struct ieee80211_vif *vif, struct ieee80211_sta *sta, |
| 2127 |
struct ieee80211_key_conf *key) |
| 2128 |
{ |
| 2129 |
struct at76_priv *priv = hw->priv; |
| 2130 |
|
| 2131 |
int i; |
| 2132 |
|
| 2133 |
at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d " |
| 2134 |
"key->keylen %d", |
| 2135 |
__func__, cmd, key->cipher, key->keyidx, key->keylen); |
| 2136 |
|
| 2137 |
if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) && |
| 2138 |
(key->cipher != WLAN_CIPHER_SUITE_WEP104)) |
| 2139 |
return -EOPNOTSUPP; |
| 2140 |
|
| 2141 |
key->hw_key_idx = key->keyidx; |
| 2142 |
|
| 2143 |
mutex_lock(&priv->mtx); |
| 2144 |
|
| 2145 |
switch (cmd) { |
| 2146 |
case SET_KEY: |
| 2147 |
memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen); |
| 2148 |
priv->wep_keys_len[key->keyidx] = key->keylen; |
| 2149 |
|
| 2150 |
/* FIXME: find out how to do this properly */ |
| 2151 |
priv->wep_key_id = key->keyidx; |
| 2152 |
|
| 2153 |
break; |
| 2154 |
case DISABLE_KEY: |
| 2155 |
default: |
| 2156 |
priv->wep_keys_len[key->keyidx] = 0; |
| 2157 |
break; |
| 2158 |
} |
| 2159 |
|
| 2160 |
priv->wep_enabled = 0; |
| 2161 |
|
| 2162 |
for (i = 0; i < WEP_KEYS; i++) { |
| 2163 |
if (priv->wep_keys_len[i] != 0) |
| 2164 |
priv->wep_enabled = 1; |
| 2165 |
} |
| 2166 |
|
| 2167 |
at76_set_wep(priv); |
| 2168 |
|
| 2169 |
mutex_unlock(&priv->mtx); |
| 2170 |
|
| 2171 |
return 0; |
| 2172 |
} |
| 2173 |
|
| 2174 |
static const struct ieee80211_ops at76_ops = { |
| 2175 |
.add_chanctx = ieee80211_emulate_add_chanctx, |
| 2176 |
.remove_chanctx = ieee80211_emulate_remove_chanctx, |
| 2177 |
.change_chanctx = ieee80211_emulate_change_chanctx, |
| 2178 |
.switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx, |
| 2179 |
.tx = at76_mac80211_tx, |
| 2180 |
.wake_tx_queue = ieee80211_handle_wake_tx_queue, |
| 2181 |
.add_interface = at76_add_interface, |
| 2182 |
.remove_interface = at76_remove_interface, |
| 2183 |
.config = at76_config, |
| 2184 |
.bss_info_changed = at76_bss_info_changed, |
| 2185 |
.configure_filter = at76_configure_filter, |
| 2186 |
.start = at76_mac80211_start, |
| 2187 |
.stop = at76_mac80211_stop, |
| 2188 |
.hw_scan = at76_hw_scan, |
| 2189 |
.set_key = at76_set_key, |
| 2190 |
}; |
| 2191 |
|
| 2192 |
/* Allocate network device and initialize private data */ |
| 2193 |
static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) |
| 2194 |
{ |
| 2195 |
struct ieee80211_hw *hw; |
| 2196 |
struct at76_priv *priv; |
| 2197 |
|
| 2198 |
hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops); |
| 2199 |
if (!hw) { |
| 2200 |
printk(KERN_ERR DRIVER_NAME ": could not register" |
| 2201 |
" ieee80211_hw\n"); |
| 2202 |
return NULL; |
| 2203 |
} |
| 2204 |
|
| 2205 |
priv = hw->priv; |
| 2206 |
priv->hw = hw; |
| 2207 |
|
| 2208 |
priv->udev = udev; |
| 2209 |
|
| 2210 |
mutex_init(&priv->mtx); |
| 2211 |
INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc); |
| 2212 |
INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx); |
| 2213 |
INIT_WORK(&priv->work_join_bssid, at76_work_join_bssid); |
| 2214 |
INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan); |
| 2215 |
|
| 2216 |
tasklet_setup(&priv->rx_tasklet, at76_rx_tasklet); |
| 2217 |
|
| 2218 |
priv->pm_mode = AT76_PM_OFF; |
| 2219 |
priv->pm_period = 0; |
| 2220 |
|
| 2221 |
/* unit us */ |
| 2222 |
|
| 2223 |
return priv; |
| 2224 |
} |
| 2225 |
|
| 2226 |
static int at76_alloc_urbs(struct at76_priv *priv, |
| 2227 |
struct usb_interface *interface) |
| 2228 |
{ |
| 2229 |
struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out; |
| 2230 |
int i; |
| 2231 |
int buffer_size; |
| 2232 |
struct usb_host_interface *iface_desc; |
| 2233 |
|
| 2234 |
at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__); |
| 2235 |
|
| 2236 |
at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__, |
| 2237 |
interface->cur_altsetting->desc.bNumEndpoints); |
| 2238 |
|
| 2239 |
ep_in = NULL; |
| 2240 |
ep_out = NULL; |
| 2241 |
iface_desc = interface->cur_altsetting; |
| 2242 |
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { |
| 2243 |
endpoint = &iface_desc->endpoint[i].desc; |
| 2244 |
|
| 2245 |
at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x", |
| 2246 |
__func__, i, endpoint->bEndpointAddress, |
| 2247 |
endpoint->bmAttributes); |
| 2248 |
|
| 2249 |
if (!ep_in && usb_endpoint_is_bulk_in(endpoint)) |
| 2250 |
ep_in = endpoint; |
| 2251 |
|
| 2252 |
if (!ep_out && usb_endpoint_is_bulk_out(endpoint)) |
| 2253 |
ep_out = endpoint; |
| 2254 |
} |
| 2255 |
|
| 2256 |
if (!ep_in || !ep_out) { |
| 2257 |
dev_err(&interface->dev, "bulk endpoints missing\n"); |
| 2258 |
return -ENXIO; |
| 2259 |
} |
| 2260 |
|
| 2261 |
priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress); |
| 2262 |
priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress); |
| 2263 |
|
| 2264 |
priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL); |
| 2265 |
priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL); |
| 2266 |
if (!priv->rx_urb || !priv->tx_urb) { |
| 2267 |
dev_err(&interface->dev, "cannot allocate URB\n"); |
| 2268 |
return -ENOMEM; |
| 2269 |
} |
| 2270 |
|
| 2271 |
buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE; |
| 2272 |
priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL); |
| 2273 |
if (!priv->bulk_out_buffer) |
| 2274 |
return -ENOMEM; |
| 2275 |
|
| 2276 |
at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); |
| 2277 |
|
| 2278 |
return 0; |
| 2279 |
} |
| 2280 |
|
| 2281 |
static struct ieee80211_rate at76_rates[] = { |
| 2282 |
{ .bitrate = 10, .hw_value = TX_RATE_1MBIT, }, |
| 2283 |
{ .bitrate = 20, .hw_value = TX_RATE_2MBIT, }, |
| 2284 |
{ .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, }, |
| 2285 |
{ .bitrate = 110, .hw_value = TX_RATE_11MBIT, }, |
| 2286 |
}; |
| 2287 |
|
| 2288 |
static struct ieee80211_channel at76_channels[] = { |
| 2289 |
{ .center_freq = 2412, .hw_value = 1 }, |
| 2290 |
{ .center_freq = 2417, .hw_value = 2 }, |
| 2291 |
{ .center_freq = 2422, .hw_value = 3 }, |
| 2292 |
{ .center_freq = 2427, .hw_value = 4 }, |
| 2293 |
{ .center_freq = 2432, .hw_value = 5 }, |
| 2294 |
{ .center_freq = 2437, .hw_value = 6 }, |
| 2295 |
{ .center_freq = 2442, .hw_value = 7 }, |
| 2296 |
{ .center_freq = 2447, .hw_value = 8 }, |
| 2297 |
{ .center_freq = 2452, .hw_value = 9 }, |
| 2298 |
{ .center_freq = 2457, .hw_value = 10 }, |
| 2299 |
{ .center_freq = 2462, .hw_value = 11 }, |
| 2300 |
{ .center_freq = 2467, .hw_value = 12 }, |
| 2301 |
{ .center_freq = 2472, .hw_value = 13 }, |
| 2302 |
{ .center_freq = 2484, .hw_value = 14 } |
| 2303 |
}; |
| 2304 |
|
| 2305 |
static struct ieee80211_supported_band at76_supported_band = { |
| 2306 |
.channels = at76_channels, |
| 2307 |
.n_channels = ARRAY_SIZE(at76_channels), |
| 2308 |
.bitrates = at76_rates, |
| 2309 |
.n_bitrates = ARRAY_SIZE(at76_rates), |
| 2310 |
}; |
| 2311 |
|
| 2312 |
/* Register network device and initialize the hardware */ |
| 2313 |
static int at76_init_new_device(struct at76_priv *priv, |
| 2314 |
struct usb_interface *interface) |
| 2315 |
{ |
| 2316 |
struct wiphy *wiphy; |
| 2317 |
size_t len; |
| 2318 |
int ret; |
| 2319 |
|
| 2320 |
/* set up the endpoint information */ |
| 2321 |
/* check out the endpoints */ |
| 2322 |
|
| 2323 |
at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints", |
| 2324 |
interface->cur_altsetting->desc.bNumEndpoints); |
| 2325 |
|
| 2326 |
ret = at76_alloc_urbs(priv, interface); |
| 2327 |
if (ret < 0) |
| 2328 |
goto exit; |
| 2329 |
|
| 2330 |
/* MAC address */ |
| 2331 |
ret = at76_get_hw_config(priv); |
| 2332 |
if (ret < 0) { |
| 2333 |
dev_err(&interface->dev, "cannot get MAC address\n"); |
| 2334 |
goto exit; |
| 2335 |
} |
| 2336 |
|
| 2337 |
priv->domain = at76_get_reg_domain(priv->regulatory_domain); |
| 2338 |
|
| 2339 |
priv->channel = DEF_CHANNEL; |
| 2340 |
priv->iw_mode = IW_MODE_INFRA; |
| 2341 |
priv->rts_threshold = DEF_RTS_THRESHOLD; |
| 2342 |
priv->frag_threshold = DEF_FRAG_THRESHOLD; |
| 2343 |
priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT; |
| 2344 |
priv->txrate = TX_RATE_AUTO; |
| 2345 |
priv->preamble_type = PREAMBLE_TYPE_LONG; |
| 2346 |
priv->beacon_period = 100; |
| 2347 |
priv->auth_mode = WLAN_AUTH_OPEN; |
| 2348 |
priv->scan_min_time = DEF_SCAN_MIN_TIME; |
| 2349 |
priv->scan_max_time = DEF_SCAN_MAX_TIME; |
| 2350 |
priv->scan_mode = SCAN_TYPE_ACTIVE; |
| 2351 |
priv->device_unplugged = 0; |
| 2352 |
|
| 2353 |
/* mac80211 initialisation */ |
| 2354 |
wiphy = priv->hw->wiphy; |
| 2355 |
priv->hw->wiphy->max_scan_ssids = 1; |
| 2356 |
priv->hw->wiphy->max_scan_ie_len = 0; |
| 2357 |
priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); |
| 2358 |
priv->hw->wiphy->bands[NL80211_BAND_2GHZ] = &at76_supported_band; |
| 2359 |
ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS); |
| 2360 |
ieee80211_hw_set(priv->hw, SIGNAL_UNSPEC); |
| 2361 |
priv->hw->max_signal = 100; |
| 2362 |
|
| 2363 |
SET_IEEE80211_DEV(priv->hw, &interface->dev); |
| 2364 |
SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); |
| 2365 |
|
| 2366 |
len = sizeof(wiphy->fw_version); |
| 2367 |
snprintf(wiphy->fw_version, len, "%d.%d.%d-%d", |
| 2368 |
priv->fw_version.major, priv->fw_version.minor, |
| 2369 |
priv->fw_version.patch, priv->fw_version.build); |
| 2370 |
|
| 2371 |
wiphy->hw_version = priv->board_type; |
| 2372 |
|
| 2373 |
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); |
| 2374 |
|
| 2375 |
ret = ieee80211_register_hw(priv->hw); |
| 2376 |
if (ret) { |
| 2377 |
printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n", |
| 2378 |
ret); |
| 2379 |
goto exit; |
| 2380 |
} |
| 2381 |
|
| 2382 |
priv->mac80211_registered = 1; |
| 2383 |
|
| 2384 |
wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n", |
| 2385 |
dev_name(&interface->dev), priv->mac_addr, |
| 2386 |
priv->fw_version.major, priv->fw_version.minor, |
| 2387 |
priv->fw_version.patch, priv->fw_version.build); |
| 2388 |
wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n", |
| 2389 |
priv->regulatory_domain, priv->domain->name); |
| 2390 |
|
| 2391 |
exit: |
| 2392 |
return ret; |
| 2393 |
} |
| 2394 |
|
| 2395 |
static void at76_delete_device(struct at76_priv *priv) |
| 2396 |
{ |
| 2397 |
at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__); |
| 2398 |
|
| 2399 |
/* The device is gone, don't bother turning it off */ |
| 2400 |
priv->device_unplugged = 1; |
| 2401 |
|
| 2402 |
tasklet_kill(&priv->rx_tasklet); |
| 2403 |
|
| 2404 |
if (priv->mac80211_registered) |
| 2405 |
ieee80211_unregister_hw(priv->hw); |
| 2406 |
|
| 2407 |
if (priv->tx_urb) { |
| 2408 |
usb_kill_urb(priv->tx_urb); |
| 2409 |
usb_free_urb(priv->tx_urb); |
| 2410 |
} |
| 2411 |
if (priv->rx_urb) { |
| 2412 |
usb_kill_urb(priv->rx_urb); |
| 2413 |
usb_free_urb(priv->rx_urb); |
| 2414 |
} |
| 2415 |
|
| 2416 |
at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__); |
| 2417 |
|
| 2418 |
kfree(priv->bulk_out_buffer); |
| 2419 |
|
| 2420 |
timer_delete_sync(&ledtrig_tx_timer); |
| 2421 |
|
| 2422 |
kfree_skb(priv->rx_skb); |
| 2423 |
|
| 2424 |
at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw", |
| 2425 |
__func__); |
| 2426 |
ieee80211_free_hw(priv->hw); |
| 2427 |
|
| 2428 |
at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); |
| 2429 |
} |
| 2430 |
|
| 2431 |
static int at76_probe(struct usb_interface *interface, |
| 2432 |
const struct usb_device_id *id) |
| 2433 |
{ |
| 2434 |
int ret; |
| 2435 |
struct at76_priv *priv; |
| 2436 |
struct fwentry *fwe; |
| 2437 |
struct usb_device *udev; |
| 2438 |
int op_mode; |
| 2439 |
int need_ext_fw = 0; |
| 2440 |
struct mib_fw_version *fwv; |
| 2441 |
int board_type = (int)id->driver_info; |
| 2442 |
|
| 2443 |
udev = usb_get_dev(interface_to_usbdev(interface)); |
| 2444 |
|
| 2445 |
fwv = kmalloc_obj(*fwv); |
| 2446 |
if (!fwv) { |
| 2447 |
ret = -ENOMEM; |
| 2448 |
goto exit; |
| 2449 |
} |
| 2450 |
|
| 2451 |
/* Load firmware into kernel memory */ |
| 2452 |
fwe = at76_load_firmware(udev, board_type); |
| 2453 |
if (!fwe) { |
| 2454 |
ret = -ENOENT; |
| 2455 |
goto exit; |
| 2456 |
} |
| 2457 |
|
| 2458 |
op_mode = at76_get_op_mode(udev); |
| 2459 |
|
| 2460 |
at76_dbg(DBG_DEVSTART, "opmode %d", op_mode); |
| 2461 |
|
| 2462 |
/* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ??? |
| 2463 |
we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */ |
| 2464 |
|
| 2465 |
if (op_mode == OPMODE_HW_CONFIG_MODE) { |
| 2466 |
dev_err(&interface->dev, |
| 2467 |
"cannot handle a device in HW_CONFIG_MODE\n"); |
| 2468 |
ret = -EBUSY; |
| 2469 |
goto exit; |
| 2470 |
} |
| 2471 |
|
| 2472 |
if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH |
| 2473 |
&& op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) { |
| 2474 |
/* download internal firmware part */ |
| 2475 |
dev_printk(KERN_DEBUG, &interface->dev, |
| 2476 |
"downloading internal firmware\n"); |
| 2477 |
ret = at76_load_internal_fw(udev, fwe); |
| 2478 |
if (ret < 0) { |
| 2479 |
dev_err(&interface->dev, |
| 2480 |
"error %d downloading internal firmware\n", |
| 2481 |
ret); |
| 2482 |
} |
| 2483 |
goto exit; |
| 2484 |
} |
| 2485 |
|
| 2486 |
/* Internal firmware already inside the device. Get firmware |
| 2487 |
* version to test if external firmware is loaded. |
| 2488 |
* This works only for newer firmware, e.g. the Intersil 0.90.x |
| 2489 |
* says "control timeout on ep0in" and subsequent |
| 2490 |
* at76_get_op_mode() fail too :-( */ |
| 2491 |
|
| 2492 |
/* if version >= 0.100.x.y or device with built-in flash we can |
| 2493 |
* query the device for the fw version */ |
| 2494 |
if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100) |
| 2495 |
|| (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) { |
| 2496 |
ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv)); |
| 2497 |
if (ret < 0 || (fwv->major | fwv->minor) == 0) |
| 2498 |
need_ext_fw = 1; |
| 2499 |
} else |
| 2500 |
/* No way to check firmware version, reload to be sure */ |
| 2501 |
need_ext_fw = 1; |
| 2502 |
|
| 2503 |
if (need_ext_fw) { |
| 2504 |
dev_printk(KERN_DEBUG, &interface->dev, |
| 2505 |
"downloading external firmware\n"); |
| 2506 |
|
| 2507 |
ret = at76_load_external_fw(udev, fwe); |
| 2508 |
if (ret < 0) |
| 2509 |
goto exit; |
| 2510 |
|
| 2511 |
/* Re-check firmware version */ |
| 2512 |
ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv)); |
| 2513 |
if (ret < 0) { |
| 2514 |
dev_err(&interface->dev, |
| 2515 |
"error %d getting firmware version\n", ret); |
| 2516 |
goto exit; |
| 2517 |
} |
| 2518 |
} |
| 2519 |
|
| 2520 |
priv = at76_alloc_new_device(udev); |
| 2521 |
if (!priv) { |
| 2522 |
ret = -ENOMEM; |
| 2523 |
goto exit; |
| 2524 |
} |
| 2525 |
|
| 2526 |
usb_set_intfdata(interface, priv); |
| 2527 |
|
| 2528 |
memcpy(&priv->fw_version, fwv, sizeof(*fwv)); |
| 2529 |
priv->board_type = board_type; |
| 2530 |
|
| 2531 |
ret = at76_init_new_device(priv, interface); |
| 2532 |
if (ret < 0) |
| 2533 |
at76_delete_device(priv); |
| 2534 |
|
| 2535 |
exit: |
| 2536 |
kfree(fwv); |
| 2537 |
if (ret < 0) |
| 2538 |
usb_put_dev(udev); |
| 2539 |
return ret; |
| 2540 |
} |
| 2541 |
|
| 2542 |
static void at76_disconnect(struct usb_interface *interface) |
| 2543 |
{ |
| 2544 |
struct at76_priv *priv; |
| 2545 |
|
| 2546 |
priv = usb_get_intfdata(interface); |
| 2547 |
usb_set_intfdata(interface, NULL); |
| 2548 |
|
| 2549 |
/* Disconnect after loading internal firmware */ |
| 2550 |
if (!priv) |
| 2551 |
return; |
| 2552 |
|
| 2553 |
wiphy_info(priv->hw->wiphy, "disconnecting\n"); |
| 2554 |
at76_delete_device(priv); |
| 2555 |
usb_put_dev(interface_to_usbdev(interface)); |
| 2556 |
dev_info(&interface->dev, "disconnected\n"); |
| 2557 |
} |
| 2558 |
|
| 2559 |
/* Structure for registering this driver with the USB subsystem */ |
| 2560 |
static struct usb_driver at76_driver = { |
| 2561 |
.name = DRIVER_NAME, |
| 2562 |
.probe = at76_probe, |
| 2563 |
.disconnect = at76_disconnect, |
| 2564 |
.id_table = dev_table, |
| 2565 |
.disable_hub_initiated_lpm = 1, |
| 2566 |
}; |
| 2567 |
|
| 2568 |
static int __init at76_mod_init(void) |
| 2569 |
{ |
| 2570 |
int result; |
| 2571 |
|
| 2572 |
printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n"); |
| 2573 |
|
| 2574 |
/* register this driver with the USB subsystem */ |
| 2575 |
result = usb_register(&at76_driver); |
| 2576 |
if (result < 0) |
| 2577 |
printk(KERN_ERR DRIVER_NAME |
| 2578 |
": usb_register failed (status %d)\n", result); |
| 2579 |
else |
| 2580 |
led_trigger_register_simple("at76_usb-tx", &ledtrig_tx); |
| 2581 |
return result; |
| 2582 |
} |
| 2583 |
|
| 2584 |
static void __exit at76_mod_exit(void) |
| 2585 |
{ |
| 2586 |
int i; |
| 2587 |
|
| 2588 |
printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n"); |
| 2589 |
usb_deregister(&at76_driver); |
| 2590 |
for (i = 0; i < ARRAY_SIZE(firmwares); i++) |
| 2591 |
release_firmware(firmwares[i].fw); |
| 2592 |
led_trigger_unregister_simple(ledtrig_tx); |
| 2593 |
} |
| 2594 |
|
| 2595 |
module_param_named(debug, at76_debug, uint, 0600); |
| 2596 |
MODULE_PARM_DESC(debug, "Debugging level"); |
| 2597 |
|
| 2598 |
module_init(at76_mod_init); |
| 2599 |
module_exit(at76_mod_exit); |
| 2600 |
|
| 2601 |
MODULE_AUTHOR("Oliver Kurth <[email protected]>"); |
| 2602 |
MODULE_AUTHOR("Joerg Albert <[email protected]>"); |
| 2603 |
MODULE_AUTHOR("Alex <[email protected]>"); |
| 2604 |
MODULE_AUTHOR("Nick Jones"); |
| 2605 |
MODULE_AUTHOR("Balint Seeber <[email protected]>"); |
| 2606 |
MODULE_AUTHOR("Pavel Roskin <[email protected]>"); |
| 2607 |
MODULE_AUTHOR("Guido Guenther <[email protected]>"); |
| 2608 |
MODULE_AUTHOR("Kalle Valo <[email protected]>"); |
| 2609 |
MODULE_AUTHOR("Sebastian Smolorz <[email protected]>"); |
| 2610 |
MODULE_DESCRIPTION(DRIVER_DESC); |
| 2611 |
MODULE_LICENSE("GPL"); |