| 1 |
/* |
| 2 |
* Atheros CARL9170 driver |
| 3 |
* |
| 4 |
* USB - frontend |
| 5 |
* |
| 6 |
* Copyright 2008, Johannes Berg <[email protected]> |
| 7 |
* Copyright 2009, 2010, Christian Lamparter <[email protected]> |
| 8 |
* |
| 9 |
* This program is free software; you can redistribute it and/or modify |
| 10 |
* it under the terms of the GNU General Public License as published by |
| 11 |
* the Free Software Foundation; either version 2 of the License, or |
| 12 |
* (at your option) any later version. |
| 13 |
* |
| 14 |
* This program is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* You should have received a copy of the GNU General Public License |
| 20 |
* along with this program; see the file COPYING. If not, see |
| 21 |
* http://www.gnu.org/licenses/. |
| 22 |
* |
| 23 |
* This file incorporates work covered by the following copyright and |
| 24 |
* permission notice: |
| 25 |
* Copyright (c) 2007-2008 Atheros Communications, Inc. |
| 26 |
* |
| 27 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 28 |
* purpose with or without fee is hereby granted, provided that the above |
| 29 |
* copyright notice and this permission notice appear in all copies. |
| 30 |
* |
| 31 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 32 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 33 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 34 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 35 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 36 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 37 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 38 |
*/ |
| 39 |
|
| 40 |
#include <linux/module.h> |
| 41 |
#include <linux/slab.h> |
| 42 |
#include <linux/usb.h> |
| 43 |
#include <linux/firmware.h> |
| 44 |
#include <linux/etherdevice.h> |
| 45 |
#include <linux/device.h> |
| 46 |
#include <net/mac80211.h> |
| 47 |
#include "carl9170.h" |
| 48 |
#include "cmd.h" |
| 49 |
#include "hw.h" |
| 50 |
#include "fwcmd.h" |
| 51 |
|
| 52 |
MODULE_AUTHOR("Johannes Berg <[email protected]>"); |
| 53 |
MODULE_AUTHOR("Christian Lamparter <[email protected]>"); |
| 54 |
MODULE_LICENSE("GPL"); |
| 55 |
MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); |
| 56 |
MODULE_FIRMWARE(CARL9170FW_NAME); |
| 57 |
MODULE_ALIAS("ar9170usb"); |
| 58 |
MODULE_ALIAS("arusb_lnx"); |
| 59 |
|
| 60 |
/* |
| 61 |
* Note: |
| 62 |
* |
| 63 |
* Always update our wiki's device list (located at: |
| 64 |
* https://wireless.wiki.kernel.org/en/users/Drivers/ar9170/devices ), |
| 65 |
* whenever you add a new device. |
| 66 |
*/ |
| 67 |
static const struct usb_device_id carl9170_usb_ids[] = { |
| 68 |
/* Atheros 9170 */ |
| 69 |
{ USB_DEVICE(0x0cf3, 0x9170) }, |
| 70 |
/* Atheros TG121N */ |
| 71 |
{ USB_DEVICE(0x0cf3, 0x1001) }, |
| 72 |
/* TP-Link TL-WN821N v2 */ |
| 73 |
{ USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON | |
| 74 |
CARL9170_ONE_LED }, |
| 75 |
/* 3Com Dual Band 802.11n USB Adapter */ |
| 76 |
{ USB_DEVICE(0x0cf3, 0x1010) }, |
| 77 |
/* H3C Dual Band 802.11n USB Adapter */ |
| 78 |
{ USB_DEVICE(0x0cf3, 0x1011) }, |
| 79 |
/* Cace Airpcap NX */ |
| 80 |
{ USB_DEVICE(0xcace, 0x0300) }, |
| 81 |
/* D-Link DWA 160 A1 */ |
| 82 |
{ USB_DEVICE(0x07d1, 0x3c10) }, |
| 83 |
/* D-Link DWA 160 A2 */ |
| 84 |
{ USB_DEVICE(0x07d1, 0x3a09) }, |
| 85 |
/* D-Link DWA 130 D */ |
| 86 |
{ USB_DEVICE(0x07d1, 0x3a0f) }, |
| 87 |
/* Netgear WNA1000 */ |
| 88 |
{ USB_DEVICE(0x0846, 0x9040) }, |
| 89 |
/* Netgear WNDA3100 (v1) */ |
| 90 |
{ USB_DEVICE(0x0846, 0x9010) }, |
| 91 |
/* Netgear WN111 v2 */ |
| 92 |
{ USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED }, |
| 93 |
/* Zydas ZD1221 */ |
| 94 |
{ USB_DEVICE(0x0ace, 0x1221) }, |
| 95 |
/* Proxim ORiNOCO 802.11n USB */ |
| 96 |
{ USB_DEVICE(0x1435, 0x0804) }, |
| 97 |
/* WNC Generic 11n USB Dongle */ |
| 98 |
{ USB_DEVICE(0x1435, 0x0326) }, |
| 99 |
/* ZyXEL NWD271N */ |
| 100 |
{ USB_DEVICE(0x0586, 0x3417) }, |
| 101 |
/* Z-Com UB81 BG */ |
| 102 |
{ USB_DEVICE(0x0cde, 0x0023) }, |
| 103 |
/* Z-Com UB82 ABG */ |
| 104 |
{ USB_DEVICE(0x0cde, 0x0026) }, |
| 105 |
/* Sphairon Homelink 1202 */ |
| 106 |
{ USB_DEVICE(0x0cde, 0x0027) }, |
| 107 |
/* Arcadyan WN7512 */ |
| 108 |
{ USB_DEVICE(0x083a, 0xf522) }, |
| 109 |
/* Planex GWUS300 */ |
| 110 |
{ USB_DEVICE(0x2019, 0x5304) }, |
| 111 |
/* IO-Data WNGDNUS2 */ |
| 112 |
{ USB_DEVICE(0x04bb, 0x093f) }, |
| 113 |
/* NEC WL300NU-G */ |
| 114 |
{ USB_DEVICE(0x0409, 0x0249) }, |
| 115 |
/* NEC WL300NU-AG */ |
| 116 |
{ USB_DEVICE(0x0409, 0x02b4) }, |
| 117 |
/* AVM FRITZ!WLAN USB Stick N */ |
| 118 |
{ USB_DEVICE(0x057c, 0x8401) }, |
| 119 |
/* AVM FRITZ!WLAN USB Stick N 2.4 */ |
| 120 |
{ USB_DEVICE(0x057c, 0x8402) }, |
| 121 |
/* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */ |
| 122 |
{ USB_DEVICE(0x1668, 0x1200) }, |
| 123 |
/* Airlive X.USB a/b/g/n */ |
| 124 |
{ USB_DEVICE(0x1b75, 0x9170) }, |
| 125 |
|
| 126 |
/* terminate */ |
| 127 |
{} |
| 128 |
}; |
| 129 |
MODULE_DEVICE_TABLE(usb, carl9170_usb_ids); |
| 130 |
|
| 131 |
static struct usb_driver carl9170_driver; |
| 132 |
|
| 133 |
static void carl9170_usb_submit_data_urb(struct ar9170 *ar) |
| 134 |
{ |
| 135 |
struct urb *urb; |
| 136 |
int err; |
| 137 |
|
| 138 |
if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS) |
| 139 |
goto err_acc; |
| 140 |
|
| 141 |
urb = usb_get_from_anchor(&ar->tx_wait); |
| 142 |
if (!urb) |
| 143 |
goto err_acc; |
| 144 |
|
| 145 |
usb_anchor_urb(urb, &ar->tx_anch); |
| 146 |
|
| 147 |
err = usb_submit_urb(urb, GFP_ATOMIC); |
| 148 |
if (unlikely(err)) { |
| 149 |
if (net_ratelimit()) { |
| 150 |
dev_err(&ar->udev->dev, "tx submit failed (%d)\n", |
| 151 |
urb->status); |
| 152 |
} |
| 153 |
|
| 154 |
usb_unanchor_urb(urb); |
| 155 |
usb_anchor_urb(urb, &ar->tx_err); |
| 156 |
} |
| 157 |
|
| 158 |
usb_free_urb(urb); |
| 159 |
|
| 160 |
if (likely(err == 0)) |
| 161 |
return; |
| 162 |
|
| 163 |
err_acc: |
| 164 |
atomic_dec(&ar->tx_anch_urbs); |
| 165 |
} |
| 166 |
|
| 167 |
static void carl9170_usb_tx_data_complete(struct urb *urb) |
| 168 |
{ |
| 169 |
struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); |
| 170 |
|
| 171 |
if (WARN_ON_ONCE(!ar)) { |
| 172 |
dev_kfree_skb_irq(urb->context); |
| 173 |
return; |
| 174 |
} |
| 175 |
|
| 176 |
atomic_dec(&ar->tx_anch_urbs); |
| 177 |
|
| 178 |
switch (urb->status) { |
| 179 |
/* everything is fine */ |
| 180 |
case 0: |
| 181 |
carl9170_tx_callback(ar, urb->context); |
| 182 |
break; |
| 183 |
|
| 184 |
/* disconnect */ |
| 185 |
case -ENOENT: |
| 186 |
case -ECONNRESET: |
| 187 |
case -ENODEV: |
| 188 |
case -ESHUTDOWN: |
| 189 |
/* |
| 190 |
* Defer the frame clean-up to the tasklet worker. |
| 191 |
* This is necessary, because carl9170_tx_drop |
| 192 |
* does not work in an irqsave context. |
| 193 |
*/ |
| 194 |
usb_anchor_urb(urb, &ar->tx_err); |
| 195 |
return; |
| 196 |
|
| 197 |
/* a random transmission error has occurred? */ |
| 198 |
default: |
| 199 |
if (net_ratelimit()) { |
| 200 |
dev_err(&ar->udev->dev, "tx failed (%d)\n", |
| 201 |
urb->status); |
| 202 |
} |
| 203 |
|
| 204 |
usb_anchor_urb(urb, &ar->tx_err); |
| 205 |
break; |
| 206 |
} |
| 207 |
|
| 208 |
if (likely(IS_STARTED(ar))) |
| 209 |
carl9170_usb_submit_data_urb(ar); |
| 210 |
} |
| 211 |
|
| 212 |
static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar) |
| 213 |
{ |
| 214 |
struct urb *urb; |
| 215 |
int err; |
| 216 |
|
| 217 |
if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) { |
| 218 |
atomic_dec(&ar->tx_cmd_urbs); |
| 219 |
return 0; |
| 220 |
} |
| 221 |
|
| 222 |
urb = usb_get_from_anchor(&ar->tx_cmd); |
| 223 |
if (!urb) { |
| 224 |
atomic_dec(&ar->tx_cmd_urbs); |
| 225 |
return 0; |
| 226 |
} |
| 227 |
|
| 228 |
usb_anchor_urb(urb, &ar->tx_anch); |
| 229 |
err = usb_submit_urb(urb, GFP_ATOMIC); |
| 230 |
if (unlikely(err)) { |
| 231 |
usb_unanchor_urb(urb); |
| 232 |
atomic_dec(&ar->tx_cmd_urbs); |
| 233 |
} |
| 234 |
usb_free_urb(urb); |
| 235 |
|
| 236 |
return err; |
| 237 |
} |
| 238 |
|
| 239 |
static void carl9170_usb_cmd_complete(struct urb *urb) |
| 240 |
{ |
| 241 |
struct ar9170 *ar = urb->context; |
| 242 |
int err = 0; |
| 243 |
|
| 244 |
if (WARN_ON_ONCE(!ar)) |
| 245 |
return; |
| 246 |
|
| 247 |
atomic_dec(&ar->tx_cmd_urbs); |
| 248 |
|
| 249 |
switch (urb->status) { |
| 250 |
/* everything is fine */ |
| 251 |
case 0: |
| 252 |
break; |
| 253 |
|
| 254 |
/* disconnect */ |
| 255 |
case -ENOENT: |
| 256 |
case -ECONNRESET: |
| 257 |
case -ENODEV: |
| 258 |
case -ESHUTDOWN: |
| 259 |
return; |
| 260 |
|
| 261 |
default: |
| 262 |
err = urb->status; |
| 263 |
break; |
| 264 |
} |
| 265 |
|
| 266 |
if (!IS_INITIALIZED(ar)) |
| 267 |
return; |
| 268 |
|
| 269 |
if (err) |
| 270 |
dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err); |
| 271 |
|
| 272 |
err = carl9170_usb_submit_cmd_urb(ar); |
| 273 |
if (err) |
| 274 |
dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err); |
| 275 |
} |
| 276 |
|
| 277 |
static void carl9170_usb_rx_irq_complete(struct urb *urb) |
| 278 |
{ |
| 279 |
struct ar9170 *ar = urb->context; |
| 280 |
|
| 281 |
if (WARN_ON_ONCE(!ar)) |
| 282 |
return; |
| 283 |
|
| 284 |
switch (urb->status) { |
| 285 |
/* everything is fine */ |
| 286 |
case 0: |
| 287 |
break; |
| 288 |
|
| 289 |
/* disconnect */ |
| 290 |
case -ENOENT: |
| 291 |
case -ECONNRESET: |
| 292 |
case -ENODEV: |
| 293 |
case -ESHUTDOWN: |
| 294 |
return; |
| 295 |
|
| 296 |
default: |
| 297 |
goto resubmit; |
| 298 |
} |
| 299 |
|
| 300 |
/* |
| 301 |
* While the carl9170 firmware does not use this EP, the |
| 302 |
* firmware loader in the EEPROM unfortunately does. |
| 303 |
* Therefore we need to be ready to handle out-of-band |
| 304 |
* responses and traps in case the firmware crashed and |
| 305 |
* the loader took over again. |
| 306 |
*/ |
| 307 |
carl9170_handle_command_response(ar, urb->transfer_buffer, |
| 308 |
urb->actual_length); |
| 309 |
|
| 310 |
resubmit: |
| 311 |
usb_anchor_urb(urb, &ar->rx_anch); |
| 312 |
if (unlikely(usb_submit_urb(urb, GFP_ATOMIC))) |
| 313 |
usb_unanchor_urb(urb); |
| 314 |
} |
| 315 |
|
| 316 |
static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp) |
| 317 |
{ |
| 318 |
struct urb *urb; |
| 319 |
int err = 0, runs = 0; |
| 320 |
|
| 321 |
while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) && |
| 322 |
(runs++ < AR9170_NUM_RX_URBS)) { |
| 323 |
err = -ENOSPC; |
| 324 |
urb = usb_get_from_anchor(&ar->rx_pool); |
| 325 |
if (urb) { |
| 326 |
usb_anchor_urb(urb, &ar->rx_anch); |
| 327 |
err = usb_submit_urb(urb, gfp); |
| 328 |
if (unlikely(err)) { |
| 329 |
usb_unanchor_urb(urb); |
| 330 |
usb_anchor_urb(urb, &ar->rx_pool); |
| 331 |
} else { |
| 332 |
atomic_dec(&ar->rx_pool_urbs); |
| 333 |
atomic_inc(&ar->rx_anch_urbs); |
| 334 |
} |
| 335 |
usb_free_urb(urb); |
| 336 |
} |
| 337 |
} |
| 338 |
|
| 339 |
return err; |
| 340 |
} |
| 341 |
|
| 342 |
static void carl9170_usb_rx_work(struct ar9170 *ar) |
| 343 |
{ |
| 344 |
struct urb *urb; |
| 345 |
int i; |
| 346 |
|
| 347 |
for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { |
| 348 |
urb = usb_get_from_anchor(&ar->rx_work); |
| 349 |
if (!urb) |
| 350 |
break; |
| 351 |
|
| 352 |
atomic_dec(&ar->rx_work_urbs); |
| 353 |
if (IS_INITIALIZED(ar)) { |
| 354 |
carl9170_rx(ar, urb->transfer_buffer, |
| 355 |
urb->actual_length); |
| 356 |
} |
| 357 |
|
| 358 |
usb_anchor_urb(urb, &ar->rx_pool); |
| 359 |
atomic_inc(&ar->rx_pool_urbs); |
| 360 |
|
| 361 |
usb_free_urb(urb); |
| 362 |
|
| 363 |
carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); |
| 364 |
} |
| 365 |
} |
| 366 |
|
| 367 |
void carl9170_usb_handle_tx_err(struct ar9170 *ar) |
| 368 |
{ |
| 369 |
struct urb *urb; |
| 370 |
|
| 371 |
while ((urb = usb_get_from_anchor(&ar->tx_err))) { |
| 372 |
struct sk_buff *skb = urb->context; |
| 373 |
|
| 374 |
carl9170_tx_drop(ar, skb); |
| 375 |
carl9170_tx_callback(ar, skb); |
| 376 |
usb_free_urb(urb); |
| 377 |
} |
| 378 |
} |
| 379 |
|
| 380 |
static void carl9170_usb_tasklet(struct tasklet_struct *t) |
| 381 |
{ |
| 382 |
struct ar9170 *ar = from_tasklet(ar, t, usb_tasklet); |
| 383 |
|
| 384 |
if (!IS_INITIALIZED(ar)) |
| 385 |
return; |
| 386 |
|
| 387 |
carl9170_usb_rx_work(ar); |
| 388 |
|
| 389 |
/* |
| 390 |
* Strictly speaking: The tx scheduler is not part of the USB system. |
| 391 |
* But the rx worker returns frames back to the mac80211-stack and |
| 392 |
* this is the _perfect_ place to generate the next transmissions. |
| 393 |
*/ |
| 394 |
if (IS_STARTED(ar)) |
| 395 |
carl9170_tx_scheduler(ar); |
| 396 |
} |
| 397 |
|
| 398 |
static void carl9170_usb_rx_complete(struct urb *urb) |
| 399 |
{ |
| 400 |
struct ar9170 *ar = urb->context; |
| 401 |
int err; |
| 402 |
|
| 403 |
if (WARN_ON_ONCE(!ar)) |
| 404 |
return; |
| 405 |
|
| 406 |
atomic_dec(&ar->rx_anch_urbs); |
| 407 |
|
| 408 |
switch (urb->status) { |
| 409 |
case 0: |
| 410 |
/* rx path */ |
| 411 |
usb_anchor_urb(urb, &ar->rx_work); |
| 412 |
atomic_inc(&ar->rx_work_urbs); |
| 413 |
break; |
| 414 |
|
| 415 |
case -ENOENT: |
| 416 |
case -ECONNRESET: |
| 417 |
case -ENODEV: |
| 418 |
case -ESHUTDOWN: |
| 419 |
/* handle disconnect events*/ |
| 420 |
return; |
| 421 |
|
| 422 |
default: |
| 423 |
/* handle all other errors */ |
| 424 |
usb_anchor_urb(urb, &ar->rx_pool); |
| 425 |
atomic_inc(&ar->rx_pool_urbs); |
| 426 |
break; |
| 427 |
} |
| 428 |
|
| 429 |
err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); |
| 430 |
if (unlikely(err)) { |
| 431 |
/* |
| 432 |
* usb_submit_rx_urb reported a problem. |
| 433 |
* In case this is due to a rx buffer shortage, |
| 434 |
* elevate the tasklet worker priority to |
| 435 |
* the highest available level. |
| 436 |
*/ |
| 437 |
tasklet_hi_schedule(&ar->usb_tasklet); |
| 438 |
|
| 439 |
if (atomic_read(&ar->rx_anch_urbs) == 0) { |
| 440 |
/* |
| 441 |
* At this point, either the system is too slow to |
| 442 |
* cope with the enormous workload (so we have simply |
| 443 |
* run out of active rx urbs and this unfortunately |
| 444 |
* leads to an unpredictable device), or the device |
| 445 |
* is not fully functional after an unsuccessful |
| 446 |
* firmware loading attempts (so it doesn't pass |
| 447 |
* ieee80211_register_hw() and there is no internal |
| 448 |
* workqueue at all). |
| 449 |
*/ |
| 450 |
|
| 451 |
if (ar->registered) |
| 452 |
ieee80211_queue_work(ar->hw, &ar->ping_work); |
| 453 |
else |
| 454 |
pr_warn_once("device %s is not registered\n", |
| 455 |
dev_name(&ar->udev->dev)); |
| 456 |
} |
| 457 |
} else { |
| 458 |
/* |
| 459 |
* Using anything less than _high_ priority absolutely |
| 460 |
* kills the rx performance my UP-System... |
| 461 |
*/ |
| 462 |
tasklet_hi_schedule(&ar->usb_tasklet); |
| 463 |
} |
| 464 |
} |
| 465 |
|
| 466 |
static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp) |
| 467 |
{ |
| 468 |
struct urb *urb; |
| 469 |
void *buf; |
| 470 |
|
| 471 |
buf = kmalloc(ar->fw.rx_size, gfp); |
| 472 |
if (!buf) |
| 473 |
return NULL; |
| 474 |
|
| 475 |
urb = usb_alloc_urb(0, gfp); |
| 476 |
if (!urb) { |
| 477 |
kfree(buf); |
| 478 |
return NULL; |
| 479 |
} |
| 480 |
|
| 481 |
usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev, |
| 482 |
AR9170_USB_EP_RX), buf, ar->fw.rx_size, |
| 483 |
carl9170_usb_rx_complete, ar); |
| 484 |
|
| 485 |
urb->transfer_flags |= URB_FREE_BUFFER; |
| 486 |
|
| 487 |
return urb; |
| 488 |
} |
| 489 |
|
| 490 |
static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar) |
| 491 |
{ |
| 492 |
struct urb *urb = NULL; |
| 493 |
void *ibuf; |
| 494 |
int err = -ENOMEM; |
| 495 |
|
| 496 |
urb = usb_alloc_urb(0, GFP_KERNEL); |
| 497 |
if (!urb) |
| 498 |
goto out; |
| 499 |
|
| 500 |
ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL); |
| 501 |
if (!ibuf) |
| 502 |
goto out; |
| 503 |
|
| 504 |
usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev, |
| 505 |
AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX, |
| 506 |
carl9170_usb_rx_irq_complete, ar, 1); |
| 507 |
|
| 508 |
urb->transfer_flags |= URB_FREE_BUFFER; |
| 509 |
|
| 510 |
usb_anchor_urb(urb, &ar->rx_anch); |
| 511 |
err = usb_submit_urb(urb, GFP_KERNEL); |
| 512 |
if (err) |
| 513 |
usb_unanchor_urb(urb); |
| 514 |
|
| 515 |
out: |
| 516 |
usb_free_urb(urb); |
| 517 |
return err; |
| 518 |
} |
| 519 |
|
| 520 |
static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar) |
| 521 |
{ |
| 522 |
struct urb *urb; |
| 523 |
int i, err = -EINVAL; |
| 524 |
|
| 525 |
/* |
| 526 |
* The driver actively maintains a second shadow |
| 527 |
* pool for inactive, but fully-prepared rx urbs. |
| 528 |
* |
| 529 |
* The pool should help the driver to master huge |
| 530 |
* workload spikes without running the risk of |
| 531 |
* undersupplying the hardware or wasting time by |
| 532 |
* processing rx data (streams) inside the urb |
| 533 |
* completion (hardirq context). |
| 534 |
*/ |
| 535 |
for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { |
| 536 |
urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL); |
| 537 |
if (!urb) { |
| 538 |
err = -ENOMEM; |
| 539 |
goto err_out; |
| 540 |
} |
| 541 |
|
| 542 |
usb_anchor_urb(urb, &ar->rx_pool); |
| 543 |
atomic_inc(&ar->rx_pool_urbs); |
| 544 |
usb_free_urb(urb); |
| 545 |
} |
| 546 |
|
| 547 |
err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL); |
| 548 |
if (err) |
| 549 |
goto err_out; |
| 550 |
|
| 551 |
/* the device now waiting for the firmware. */ |
| 552 |
carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); |
| 553 |
return 0; |
| 554 |
|
| 555 |
err_out: |
| 556 |
|
| 557 |
usb_scuttle_anchored_urbs(&ar->rx_pool); |
| 558 |
usb_scuttle_anchored_urbs(&ar->rx_work); |
| 559 |
usb_kill_anchored_urbs(&ar->rx_anch); |
| 560 |
return err; |
| 561 |
} |
| 562 |
|
| 563 |
static int carl9170_usb_flush(struct ar9170 *ar) |
| 564 |
{ |
| 565 |
struct urb *urb; |
| 566 |
int ret, err = 0; |
| 567 |
|
| 568 |
while ((urb = usb_get_from_anchor(&ar->tx_wait))) { |
| 569 |
struct sk_buff *skb = urb->context; |
| 570 |
carl9170_tx_drop(ar, skb); |
| 571 |
carl9170_tx_callback(ar, skb); |
| 572 |
usb_free_urb(urb); |
| 573 |
} |
| 574 |
|
| 575 |
ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000); |
| 576 |
if (ret == 0) |
| 577 |
err = -ETIMEDOUT; |
| 578 |
|
| 579 |
/* lets wait a while until the tx - queues are dried out */ |
| 580 |
ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000); |
| 581 |
if (ret == 0) |
| 582 |
err = -ETIMEDOUT; |
| 583 |
|
| 584 |
usb_kill_anchored_urbs(&ar->tx_anch); |
| 585 |
carl9170_usb_handle_tx_err(ar); |
| 586 |
|
| 587 |
return err; |
| 588 |
} |
| 589 |
|
| 590 |
static void carl9170_usb_cancel_urbs(struct ar9170 *ar) |
| 591 |
{ |
| 592 |
int err; |
| 593 |
|
| 594 |
carl9170_set_state(ar, CARL9170_UNKNOWN_STATE); |
| 595 |
|
| 596 |
err = carl9170_usb_flush(ar); |
| 597 |
if (err) |
| 598 |
dev_err(&ar->udev->dev, "stuck tx urbs!\n"); |
| 599 |
|
| 600 |
usb_poison_anchored_urbs(&ar->tx_anch); |
| 601 |
carl9170_usb_handle_tx_err(ar); |
| 602 |
usb_poison_anchored_urbs(&ar->rx_anch); |
| 603 |
|
| 604 |
tasklet_kill(&ar->usb_tasklet); |
| 605 |
|
| 606 |
usb_scuttle_anchored_urbs(&ar->rx_work); |
| 607 |
usb_scuttle_anchored_urbs(&ar->rx_pool); |
| 608 |
usb_scuttle_anchored_urbs(&ar->tx_cmd); |
| 609 |
} |
| 610 |
|
| 611 |
int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd, |
| 612 |
const bool free_buf) |
| 613 |
{ |
| 614 |
struct urb *urb; |
| 615 |
int err = 0; |
| 616 |
|
| 617 |
if (!IS_INITIALIZED(ar)) { |
| 618 |
err = -EPERM; |
| 619 |
goto err_free; |
| 620 |
} |
| 621 |
|
| 622 |
if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) { |
| 623 |
err = -EINVAL; |
| 624 |
goto err_free; |
| 625 |
} |
| 626 |
|
| 627 |
urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 628 |
if (!urb) { |
| 629 |
err = -ENOMEM; |
| 630 |
goto err_free; |
| 631 |
} |
| 632 |
|
| 633 |
if (ar->usb_ep_cmd_is_bulk) |
| 634 |
usb_fill_bulk_urb(urb, ar->udev, |
| 635 |
usb_sndbulkpipe(ar->udev, AR9170_USB_EP_CMD), |
| 636 |
cmd, cmd->hdr.len + 4, |
| 637 |
carl9170_usb_cmd_complete, ar); |
| 638 |
else |
| 639 |
usb_fill_int_urb(urb, ar->udev, |
| 640 |
usb_sndintpipe(ar->udev, AR9170_USB_EP_CMD), |
| 641 |
cmd, cmd->hdr.len + 4, |
| 642 |
carl9170_usb_cmd_complete, ar, 1); |
| 643 |
|
| 644 |
if (free_buf) |
| 645 |
urb->transfer_flags |= URB_FREE_BUFFER; |
| 646 |
|
| 647 |
usb_anchor_urb(urb, &ar->tx_cmd); |
| 648 |
usb_free_urb(urb); |
| 649 |
|
| 650 |
return carl9170_usb_submit_cmd_urb(ar); |
| 651 |
|
| 652 |
err_free: |
| 653 |
if (free_buf) |
| 654 |
kfree(cmd); |
| 655 |
|
| 656 |
return err; |
| 657 |
} |
| 658 |
|
| 659 |
int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd, |
| 660 |
unsigned int plen, void *payload, unsigned int outlen, void *out) |
| 661 |
{ |
| 662 |
int err = -ENOMEM; |
| 663 |
unsigned long time_left; |
| 664 |
|
| 665 |
if (!IS_ACCEPTING_CMD(ar)) |
| 666 |
return -EIO; |
| 667 |
|
| 668 |
if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) |
| 669 |
might_sleep(); |
| 670 |
|
| 671 |
ar->cmd.hdr.len = plen; |
| 672 |
ar->cmd.hdr.cmd = cmd; |
| 673 |
/* writing multiple regs fills this buffer already */ |
| 674 |
if (plen && payload != (u8 *)(ar->cmd.data)) |
| 675 |
memcpy(ar->cmd.data, payload, plen); |
| 676 |
|
| 677 |
spin_lock_bh(&ar->cmd_lock); |
| 678 |
ar->readbuf = out; |
| 679 |
ar->readlen = outlen; |
| 680 |
spin_unlock_bh(&ar->cmd_lock); |
| 681 |
|
| 682 |
reinit_completion(&ar->cmd_wait); |
| 683 |
err = __carl9170_exec_cmd(ar, &ar->cmd, false); |
| 684 |
|
| 685 |
if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) { |
| 686 |
time_left = wait_for_completion_timeout(&ar->cmd_wait, HZ); |
| 687 |
if (time_left == 0) { |
| 688 |
err = -ETIMEDOUT; |
| 689 |
goto err_unbuf; |
| 690 |
} |
| 691 |
|
| 692 |
if (ar->readlen != outlen) { |
| 693 |
err = -EMSGSIZE; |
| 694 |
goto err_unbuf; |
| 695 |
} |
| 696 |
} |
| 697 |
|
| 698 |
return 0; |
| 699 |
|
| 700 |
err_unbuf: |
| 701 |
/* Maybe the device was removed in the moment we were waiting? */ |
| 702 |
if (IS_STARTED(ar)) { |
| 703 |
dev_err(&ar->udev->dev, "no command feedback " |
| 704 |
"received (%d).\n", err); |
| 705 |
|
| 706 |
/* provide some maybe useful debug information */ |
| 707 |
print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE, |
| 708 |
&ar->cmd, plen + 4); |
| 709 |
|
| 710 |
carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT); |
| 711 |
} |
| 712 |
|
| 713 |
/* invalidate to avoid completing the next command prematurely */ |
| 714 |
spin_lock_bh(&ar->cmd_lock); |
| 715 |
ar->readbuf = NULL; |
| 716 |
ar->readlen = 0; |
| 717 |
spin_unlock_bh(&ar->cmd_lock); |
| 718 |
|
| 719 |
return err; |
| 720 |
} |
| 721 |
|
| 722 |
void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb) |
| 723 |
{ |
| 724 |
struct urb *urb; |
| 725 |
struct ar9170_stream *tx_stream; |
| 726 |
void *data; |
| 727 |
unsigned int len; |
| 728 |
|
| 729 |
if (!IS_STARTED(ar)) |
| 730 |
goto err_drop; |
| 731 |
|
| 732 |
urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 733 |
if (!urb) |
| 734 |
goto err_drop; |
| 735 |
|
| 736 |
if (ar->fw.tx_stream) { |
| 737 |
tx_stream = (void *) (skb->data - sizeof(*tx_stream)); |
| 738 |
|
| 739 |
len = skb->len + sizeof(*tx_stream); |
| 740 |
tx_stream->length = cpu_to_le16(len); |
| 741 |
tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG); |
| 742 |
data = tx_stream; |
| 743 |
} else { |
| 744 |
data = skb->data; |
| 745 |
len = skb->len; |
| 746 |
} |
| 747 |
|
| 748 |
usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev, |
| 749 |
AR9170_USB_EP_TX), data, len, |
| 750 |
carl9170_usb_tx_data_complete, skb); |
| 751 |
|
| 752 |
urb->transfer_flags |= URB_ZERO_PACKET; |
| 753 |
|
| 754 |
usb_anchor_urb(urb, &ar->tx_wait); |
| 755 |
|
| 756 |
usb_free_urb(urb); |
| 757 |
|
| 758 |
carl9170_usb_submit_data_urb(ar); |
| 759 |
return; |
| 760 |
|
| 761 |
err_drop: |
| 762 |
carl9170_tx_drop(ar, skb); |
| 763 |
carl9170_tx_callback(ar, skb); |
| 764 |
} |
| 765 |
|
| 766 |
static void carl9170_release_firmware(struct ar9170 *ar) |
| 767 |
{ |
| 768 |
if (ar->fw.fw) { |
| 769 |
release_firmware(ar->fw.fw); |
| 770 |
memset(&ar->fw, 0, sizeof(ar->fw)); |
| 771 |
} |
| 772 |
} |
| 773 |
|
| 774 |
void carl9170_usb_stop(struct ar9170 *ar) |
| 775 |
{ |
| 776 |
int ret; |
| 777 |
|
| 778 |
carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED); |
| 779 |
|
| 780 |
ret = carl9170_usb_flush(ar); |
| 781 |
if (ret) |
| 782 |
dev_err(&ar->udev->dev, "kill pending tx urbs.\n"); |
| 783 |
|
| 784 |
usb_poison_anchored_urbs(&ar->tx_anch); |
| 785 |
carl9170_usb_handle_tx_err(ar); |
| 786 |
|
| 787 |
/* kill any pending command */ |
| 788 |
spin_lock_bh(&ar->cmd_lock); |
| 789 |
ar->readlen = 0; |
| 790 |
spin_unlock_bh(&ar->cmd_lock); |
| 791 |
complete(&ar->cmd_wait); |
| 792 |
|
| 793 |
/* |
| 794 |
* Note: |
| 795 |
* So far we freed all tx urbs, but we won't dare to touch any rx urbs. |
| 796 |
* Else we would end up with a unresponsive device... |
| 797 |
*/ |
| 798 |
} |
| 799 |
|
| 800 |
int carl9170_usb_open(struct ar9170 *ar) |
| 801 |
{ |
| 802 |
usb_unpoison_anchored_urbs(&ar->tx_anch); |
| 803 |
|
| 804 |
carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); |
| 805 |
return 0; |
| 806 |
} |
| 807 |
|
| 808 |
static int carl9170_usb_load_firmware(struct ar9170 *ar) |
| 809 |
{ |
| 810 |
const u8 *data; |
| 811 |
u8 *buf; |
| 812 |
unsigned int transfer; |
| 813 |
size_t len; |
| 814 |
u32 addr; |
| 815 |
int err = 0; |
| 816 |
|
| 817 |
buf = kmalloc(4096, GFP_KERNEL); |
| 818 |
if (!buf) { |
| 819 |
err = -ENOMEM; |
| 820 |
goto err_out; |
| 821 |
} |
| 822 |
|
| 823 |
data = ar->fw.fw->data; |
| 824 |
len = ar->fw.fw->size; |
| 825 |
addr = ar->fw.address; |
| 826 |
|
| 827 |
/* this removes the miniboot image */ |
| 828 |
data += ar->fw.offset; |
| 829 |
len -= ar->fw.offset; |
| 830 |
|
| 831 |
while (len) { |
| 832 |
transfer = min_t(unsigned int, len, 4096u); |
| 833 |
memcpy(buf, data, transfer); |
| 834 |
|
| 835 |
err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), |
| 836 |
0x30 /* FW DL */, 0x40 | USB_DIR_OUT, |
| 837 |
addr >> 8, 0, buf, transfer, 100); |
| 838 |
|
| 839 |
if (err < 0) { |
| 840 |
kfree(buf); |
| 841 |
goto err_out; |
| 842 |
} |
| 843 |
|
| 844 |
len -= transfer; |
| 845 |
data += transfer; |
| 846 |
addr += transfer; |
| 847 |
} |
| 848 |
kfree(buf); |
| 849 |
|
| 850 |
err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), |
| 851 |
0x31 /* FW DL COMPLETE */, |
| 852 |
0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200); |
| 853 |
|
| 854 |
if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) { |
| 855 |
err = -ETIMEDOUT; |
| 856 |
goto err_out; |
| 857 |
} |
| 858 |
|
| 859 |
err = carl9170_echo_test(ar, 0x4a110123); |
| 860 |
if (err) |
| 861 |
goto err_out; |
| 862 |
|
| 863 |
/* now, start the command response counter */ |
| 864 |
ar->cmd_seq = -1; |
| 865 |
|
| 866 |
return 0; |
| 867 |
|
| 868 |
err_out: |
| 869 |
dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err); |
| 870 |
return err; |
| 871 |
} |
| 872 |
|
| 873 |
int carl9170_usb_restart(struct ar9170 *ar) |
| 874 |
{ |
| 875 |
int err = 0; |
| 876 |
|
| 877 |
if (ar->intf->condition != USB_INTERFACE_BOUND) |
| 878 |
return 0; |
| 879 |
|
| 880 |
/* |
| 881 |
* Disable the command response sequence counter check. |
| 882 |
* We already know that the device/firmware is in a bad state. |
| 883 |
* So, no extra points are awarded to anyone who reminds the |
| 884 |
* driver about that. |
| 885 |
*/ |
| 886 |
ar->cmd_seq = -2; |
| 887 |
|
| 888 |
err = carl9170_reboot(ar); |
| 889 |
|
| 890 |
carl9170_usb_stop(ar); |
| 891 |
|
| 892 |
if (err) |
| 893 |
goto err_out; |
| 894 |
|
| 895 |
tasklet_schedule(&ar->usb_tasklet); |
| 896 |
|
| 897 |
/* The reboot procedure can take quite a while to complete. */ |
| 898 |
msleep(1100); |
| 899 |
|
| 900 |
err = carl9170_usb_open(ar); |
| 901 |
if (err) |
| 902 |
goto err_out; |
| 903 |
|
| 904 |
err = carl9170_usb_load_firmware(ar); |
| 905 |
if (err) |
| 906 |
goto err_out; |
| 907 |
|
| 908 |
return 0; |
| 909 |
|
| 910 |
err_out: |
| 911 |
carl9170_usb_cancel_urbs(ar); |
| 912 |
return err; |
| 913 |
} |
| 914 |
|
| 915 |
void carl9170_usb_reset(struct ar9170 *ar) |
| 916 |
{ |
| 917 |
/* |
| 918 |
* This is the last resort to get the device going again |
| 919 |
* without any *user replugging action*. |
| 920 |
* |
| 921 |
* But there is a catch: usb_reset really is like a physical |
| 922 |
* *reconnect*. The mac80211 state will be lost in the process. |
| 923 |
* Therefore a userspace application, which is monitoring |
| 924 |
* the link must step in. |
| 925 |
*/ |
| 926 |
carl9170_usb_cancel_urbs(ar); |
| 927 |
|
| 928 |
carl9170_usb_stop(ar); |
| 929 |
|
| 930 |
usb_queue_reset_device(ar->intf); |
| 931 |
} |
| 932 |
|
| 933 |
static int carl9170_usb_init_device(struct ar9170 *ar) |
| 934 |
{ |
| 935 |
int err; |
| 936 |
|
| 937 |
/* |
| 938 |
* The carl9170 firmware let's the driver know when it's |
| 939 |
* ready for action. But we have to be prepared to gracefully |
| 940 |
* handle all spurious [flushed] messages after each (re-)boot. |
| 941 |
* Thus the command response counter remains disabled until it |
| 942 |
* can be safely synchronized. |
| 943 |
*/ |
| 944 |
ar->cmd_seq = -2; |
| 945 |
|
| 946 |
err = carl9170_usb_send_rx_irq_urb(ar); |
| 947 |
if (err) |
| 948 |
goto err_out; |
| 949 |
|
| 950 |
err = carl9170_usb_init_rx_bulk_urbs(ar); |
| 951 |
if (err) |
| 952 |
goto err_unrx; |
| 953 |
|
| 954 |
err = carl9170_usb_open(ar); |
| 955 |
if (err) |
| 956 |
goto err_unrx; |
| 957 |
|
| 958 |
mutex_lock(&ar->mutex); |
| 959 |
err = carl9170_usb_load_firmware(ar); |
| 960 |
mutex_unlock(&ar->mutex); |
| 961 |
if (err) |
| 962 |
goto err_stop; |
| 963 |
|
| 964 |
return 0; |
| 965 |
|
| 966 |
err_stop: |
| 967 |
carl9170_usb_stop(ar); |
| 968 |
|
| 969 |
err_unrx: |
| 970 |
carl9170_usb_cancel_urbs(ar); |
| 971 |
|
| 972 |
err_out: |
| 973 |
return err; |
| 974 |
} |
| 975 |
|
| 976 |
static void carl9170_usb_firmware_failed(struct ar9170 *ar) |
| 977 |
{ |
| 978 |
/* Store a copies of the usb_interface and usb_device pointer locally. |
| 979 |
* This is because release_driver initiates carl9170_usb_disconnect, |
| 980 |
* which in turn frees our driver context (ar). |
| 981 |
*/ |
| 982 |
struct usb_interface *intf = ar->intf; |
| 983 |
struct usb_device *udev = ar->udev; |
| 984 |
|
| 985 |
complete(&ar->fw_load_wait); |
| 986 |
/* at this point 'ar' could be already freed. Don't use it anymore */ |
| 987 |
ar = NULL; |
| 988 |
|
| 989 |
/* unbind anything failed */ |
| 990 |
usb_lock_device(udev); |
| 991 |
usb_driver_release_interface(&carl9170_driver, intf); |
| 992 |
usb_unlock_device(udev); |
| 993 |
|
| 994 |
usb_put_intf(intf); |
| 995 |
} |
| 996 |
|
| 997 |
static void carl9170_usb_firmware_finish(struct ar9170 *ar) |
| 998 |
{ |
| 999 |
struct usb_interface *intf = ar->intf; |
| 1000 |
int err; |
| 1001 |
|
| 1002 |
err = carl9170_parse_firmware(ar); |
| 1003 |
if (err) |
| 1004 |
goto err_freefw; |
| 1005 |
|
| 1006 |
err = carl9170_usb_init_device(ar); |
| 1007 |
if (err) |
| 1008 |
goto err_freefw; |
| 1009 |
|
| 1010 |
err = carl9170_register(ar); |
| 1011 |
|
| 1012 |
carl9170_usb_stop(ar); |
| 1013 |
if (err) |
| 1014 |
goto err_unrx; |
| 1015 |
|
| 1016 |
complete(&ar->fw_load_wait); |
| 1017 |
usb_put_intf(intf); |
| 1018 |
return; |
| 1019 |
|
| 1020 |
err_unrx: |
| 1021 |
carl9170_usb_cancel_urbs(ar); |
| 1022 |
|
| 1023 |
err_freefw: |
| 1024 |
carl9170_release_firmware(ar); |
| 1025 |
carl9170_usb_firmware_failed(ar); |
| 1026 |
} |
| 1027 |
|
| 1028 |
static void carl9170_usb_firmware_step2(const struct firmware *fw, |
| 1029 |
void *context) |
| 1030 |
{ |
| 1031 |
struct ar9170 *ar = context; |
| 1032 |
|
| 1033 |
if (fw) { |
| 1034 |
ar->fw.fw = fw; |
| 1035 |
carl9170_usb_firmware_finish(ar); |
| 1036 |
return; |
| 1037 |
} |
| 1038 |
|
| 1039 |
dev_err(&ar->udev->dev, "firmware not found.\n"); |
| 1040 |
carl9170_usb_firmware_failed(ar); |
| 1041 |
} |
| 1042 |
|
| 1043 |
static int carl9170_usb_probe(struct usb_interface *intf, |
| 1044 |
const struct usb_device_id *id) |
| 1045 |
{ |
| 1046 |
struct usb_endpoint_descriptor *ep; |
| 1047 |
struct ar9170 *ar; |
| 1048 |
struct usb_device *udev; |
| 1049 |
int i, err; |
| 1050 |
|
| 1051 |
err = usb_reset_device(interface_to_usbdev(intf)); |
| 1052 |
if (err) |
| 1053 |
return err; |
| 1054 |
|
| 1055 |
ar = carl9170_alloc(sizeof(*ar)); |
| 1056 |
if (IS_ERR(ar)) |
| 1057 |
return PTR_ERR(ar); |
| 1058 |
|
| 1059 |
udev = interface_to_usbdev(intf); |
| 1060 |
ar->udev = udev; |
| 1061 |
ar->intf = intf; |
| 1062 |
ar->features = id->driver_info; |
| 1063 |
|
| 1064 |
/* We need to remember the type of endpoint 4 because it differs |
| 1065 |
* between high- and full-speed configuration. The high-speed |
| 1066 |
* configuration specifies it as interrupt and the full-speed |
| 1067 |
* configuration as bulk endpoint. This information is required |
| 1068 |
* later when sending urbs to that endpoint. |
| 1069 |
*/ |
| 1070 |
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) { |
| 1071 |
ep = &intf->cur_altsetting->endpoint[i].desc; |
| 1072 |
|
| 1073 |
if (usb_endpoint_num(ep) == AR9170_USB_EP_CMD && |
| 1074 |
usb_endpoint_dir_out(ep) && |
| 1075 |
usb_endpoint_type(ep) == USB_ENDPOINT_XFER_BULK) |
| 1076 |
ar->usb_ep_cmd_is_bulk = true; |
| 1077 |
} |
| 1078 |
|
| 1079 |
/* Verify that all expected endpoints are present */ |
| 1080 |
if (ar->usb_ep_cmd_is_bulk) { |
| 1081 |
u8 bulk_ep_addr[] = { |
| 1082 |
AR9170_USB_EP_RX | USB_DIR_IN, |
| 1083 |
AR9170_USB_EP_TX | USB_DIR_OUT, |
| 1084 |
AR9170_USB_EP_CMD | USB_DIR_OUT, |
| 1085 |
0}; |
| 1086 |
u8 int_ep_addr[] = { |
| 1087 |
AR9170_USB_EP_IRQ | USB_DIR_IN, |
| 1088 |
0}; |
| 1089 |
if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) || |
| 1090 |
!usb_check_int_endpoints(intf, int_ep_addr)) |
| 1091 |
err = -ENODEV; |
| 1092 |
} else { |
| 1093 |
u8 bulk_ep_addr[] = { |
| 1094 |
AR9170_USB_EP_RX | USB_DIR_IN, |
| 1095 |
AR9170_USB_EP_TX | USB_DIR_OUT, |
| 1096 |
0}; |
| 1097 |
u8 int_ep_addr[] = { |
| 1098 |
AR9170_USB_EP_IRQ | USB_DIR_IN, |
| 1099 |
AR9170_USB_EP_CMD | USB_DIR_OUT, |
| 1100 |
0}; |
| 1101 |
if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) || |
| 1102 |
!usb_check_int_endpoints(intf, int_ep_addr)) |
| 1103 |
err = -ENODEV; |
| 1104 |
} |
| 1105 |
|
| 1106 |
if (err) { |
| 1107 |
carl9170_free(ar); |
| 1108 |
return err; |
| 1109 |
} |
| 1110 |
|
| 1111 |
usb_set_intfdata(intf, ar); |
| 1112 |
SET_IEEE80211_DEV(ar->hw, &intf->dev); |
| 1113 |
|
| 1114 |
init_usb_anchor(&ar->rx_anch); |
| 1115 |
init_usb_anchor(&ar->rx_pool); |
| 1116 |
init_usb_anchor(&ar->rx_work); |
| 1117 |
init_usb_anchor(&ar->tx_wait); |
| 1118 |
init_usb_anchor(&ar->tx_anch); |
| 1119 |
init_usb_anchor(&ar->tx_cmd); |
| 1120 |
init_usb_anchor(&ar->tx_err); |
| 1121 |
init_completion(&ar->cmd_wait); |
| 1122 |
init_completion(&ar->fw_boot_wait); |
| 1123 |
init_completion(&ar->fw_load_wait); |
| 1124 |
tasklet_setup(&ar->usb_tasklet, carl9170_usb_tasklet); |
| 1125 |
|
| 1126 |
atomic_set(&ar->tx_cmd_urbs, 0); |
| 1127 |
atomic_set(&ar->tx_anch_urbs, 0); |
| 1128 |
atomic_set(&ar->rx_work_urbs, 0); |
| 1129 |
atomic_set(&ar->rx_anch_urbs, 0); |
| 1130 |
atomic_set(&ar->rx_pool_urbs, 0); |
| 1131 |
|
| 1132 |
usb_get_intf(intf); |
| 1133 |
|
| 1134 |
carl9170_set_state(ar, CARL9170_STOPPED); |
| 1135 |
|
| 1136 |
err = request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME, |
| 1137 |
&ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2); |
| 1138 |
if (err) { |
| 1139 |
usb_put_intf(intf); |
| 1140 |
carl9170_free(ar); |
| 1141 |
} |
| 1142 |
return err; |
| 1143 |
} |
| 1144 |
|
| 1145 |
static void carl9170_usb_disconnect(struct usb_interface *intf) |
| 1146 |
{ |
| 1147 |
struct ar9170 *ar = usb_get_intfdata(intf); |
| 1148 |
|
| 1149 |
if (WARN_ON(!ar)) |
| 1150 |
return; |
| 1151 |
|
| 1152 |
wait_for_completion(&ar->fw_load_wait); |
| 1153 |
|
| 1154 |
if (IS_INITIALIZED(ar)) { |
| 1155 |
carl9170_reboot(ar); |
| 1156 |
carl9170_usb_stop(ar); |
| 1157 |
} |
| 1158 |
|
| 1159 |
carl9170_usb_cancel_urbs(ar); |
| 1160 |
carl9170_unregister(ar); |
| 1161 |
|
| 1162 |
usb_set_intfdata(intf, NULL); |
| 1163 |
|
| 1164 |
carl9170_release_firmware(ar); |
| 1165 |
carl9170_free(ar); |
| 1166 |
} |
| 1167 |
|
| 1168 |
#ifdef CONFIG_PM |
| 1169 |
static int carl9170_usb_suspend(struct usb_interface *intf, |
| 1170 |
pm_message_t message) |
| 1171 |
{ |
| 1172 |
struct ar9170 *ar = usb_get_intfdata(intf); |
| 1173 |
|
| 1174 |
if (!ar) |
| 1175 |
return -ENODEV; |
| 1176 |
|
| 1177 |
carl9170_usb_cancel_urbs(ar); |
| 1178 |
|
| 1179 |
return 0; |
| 1180 |
} |
| 1181 |
|
| 1182 |
static int carl9170_usb_resume(struct usb_interface *intf) |
| 1183 |
{ |
| 1184 |
struct ar9170 *ar = usb_get_intfdata(intf); |
| 1185 |
int err; |
| 1186 |
|
| 1187 |
if (!ar) |
| 1188 |
return -ENODEV; |
| 1189 |
|
| 1190 |
usb_unpoison_anchored_urbs(&ar->rx_anch); |
| 1191 |
carl9170_set_state(ar, CARL9170_STOPPED); |
| 1192 |
|
| 1193 |
/* |
| 1194 |
* The USB documentation demands that [for suspend] all traffic |
| 1195 |
* to and from the device has to stop. This would be fine, but |
| 1196 |
* there's a catch: the device[usb phy] does not come back. |
| 1197 |
* |
| 1198 |
* Upon resume the firmware will "kill" itself and the |
| 1199 |
* boot-code sorts out the magic voodoo. |
| 1200 |
* Not very nice, but there's not much what could go wrong. |
| 1201 |
*/ |
| 1202 |
msleep(1100); |
| 1203 |
|
| 1204 |
err = carl9170_usb_init_device(ar); |
| 1205 |
if (err) |
| 1206 |
goto err_unrx; |
| 1207 |
|
| 1208 |
return 0; |
| 1209 |
|
| 1210 |
err_unrx: |
| 1211 |
carl9170_usb_cancel_urbs(ar); |
| 1212 |
|
| 1213 |
return err; |
| 1214 |
} |
| 1215 |
#endif /* CONFIG_PM */ |
| 1216 |
|
| 1217 |
static struct usb_driver carl9170_driver = { |
| 1218 |
.name = KBUILD_MODNAME, |
| 1219 |
.probe = carl9170_usb_probe, |
| 1220 |
.disconnect = carl9170_usb_disconnect, |
| 1221 |
.id_table = carl9170_usb_ids, |
| 1222 |
.soft_unbind = 1, |
| 1223 |
#ifdef CONFIG_PM |
| 1224 |
.suspend = carl9170_usb_suspend, |
| 1225 |
.resume = carl9170_usb_resume, |
| 1226 |
.reset_resume = carl9170_usb_resume, |
| 1227 |
#endif /* CONFIG_PM */ |
| 1228 |
.disable_hub_initiated_lpm = 1, |
| 1229 |
}; |
| 1230 |
|
| 1231 |
module_usb_driver(carl9170_driver); |