| 1 |
/* |
| 2 |
* Copyright (c) 2010-2011 Atheros Communications Inc. |
| 3 |
* |
| 4 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 5 |
* purpose with or without fee is hereby granted, provided that the above |
| 6 |
* copyright notice and this permission notice appear in all copies. |
| 7 |
* |
| 8 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 9 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 10 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 11 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 12 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 13 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 14 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 15 |
*/ |
| 16 |
|
| 17 |
#ifndef AR9003_EEPROM_H |
| 18 |
#define AR9003_EEPROM_H |
| 19 |
|
| 20 |
#include <linux/types.h> |
| 21 |
|
| 22 |
#define AR9300_EEP_VER 0xD000 |
| 23 |
#define AR9300_EEP_VER_MINOR_MASK 0xFFF |
| 24 |
#define AR9300_EEP_MINOR_VER_1 0x1 |
| 25 |
#define AR9300_EEP_MINOR_VER AR9300_EEP_MINOR_VER_1 |
| 26 |
|
| 27 |
/* 16-bit offset location start of calibration struct */ |
| 28 |
#define AR9300_EEP_START_LOC 256 |
| 29 |
#define AR9300_NUM_5G_CAL_PIERS 8 |
| 30 |
#define AR9300_NUM_2G_CAL_PIERS 3 |
| 31 |
#define AR9300_NUM_5G_20_TARGET_POWERS 8 |
| 32 |
#define AR9300_NUM_5G_40_TARGET_POWERS 8 |
| 33 |
#define AR9300_NUM_2G_CCK_TARGET_POWERS 2 |
| 34 |
#define AR9300_NUM_2G_20_TARGET_POWERS 3 |
| 35 |
#define AR9300_NUM_2G_40_TARGET_POWERS 3 |
| 36 |
/* #define AR9300_NUM_CTLS 21 */ |
| 37 |
#define AR9300_NUM_CTLS_5G 9 |
| 38 |
#define AR9300_NUM_CTLS_2G 12 |
| 39 |
#define AR9300_NUM_BAND_EDGES_5G 8 |
| 40 |
#define AR9300_NUM_BAND_EDGES_2G 4 |
| 41 |
#define AR9300_EEPMISC_WOW 0x02 |
| 42 |
#define AR9300_CUSTOMER_DATA_SIZE 20 |
| 43 |
|
| 44 |
#define AR9300_MAX_CHAINS 3 |
| 45 |
#define AR9300_ANT_16S 25 |
| 46 |
#define AR9300_FUTURE_MODAL_SZ 6 |
| 47 |
|
| 48 |
#define AR9300_PAPRD_RATE_MASK 0x01ffffff |
| 49 |
#define AR9300_PAPRD_SCALE_1 0x0e000000 |
| 50 |
#define AR9300_PAPRD_SCALE_1_S 25 |
| 51 |
#define AR9300_PAPRD_SCALE_2 0x70000000 |
| 52 |
#define AR9300_PAPRD_SCALE_2_S 28 |
| 53 |
|
| 54 |
#define AR9300_EEP_ANTDIV_CONTROL_DEFAULT_VALUE 0xc9 |
| 55 |
|
| 56 |
/* Delta from which to start power to pdadc table */ |
| 57 |
/* This offset is used in both open loop and closed loop power control |
| 58 |
* schemes. In open loop power control, it is not really needed, but for |
| 59 |
* the "sake of consistency" it was kept. For certain AP designs, this |
| 60 |
* value is overwritten by the value in the flag "pwrTableOffset" just |
| 61 |
* before writing the pdadc vs pwr into the chip registers. |
| 62 |
*/ |
| 63 |
#define AR9300_PWR_TABLE_OFFSET 0 |
| 64 |
|
| 65 |
/* Noise power data definitions |
| 66 |
* units are: 4 x dBm - NOISE_PWR_DATA_OFFSET |
| 67 |
* (e.g. -25 = (-25/4 - 90) = -96.25 dBm) |
| 68 |
* range (for 6 signed bits) is (-32 to 31) + offset => -122dBm to -59dBm |
| 69 |
* resolution (2 bits) is 0.25dBm |
| 70 |
*/ |
| 71 |
#define NOISE_PWR_DATA_OFFSET -90 |
| 72 |
#define NOISE_PWR_DBM_2_INT(_p) ((((_p) + 3) >> 2) + NOISE_PWR_DATA_OFFSET) |
| 73 |
#define N2DBM(_p) NOISE_PWR_DBM_2_INT(_p) |
| 74 |
|
| 75 |
/* byte addressable */ |
| 76 |
#define AR9300_EEPROM_SIZE (16*1024) |
| 77 |
|
| 78 |
#define AR9300_BASE_ADDR_4K 0xfff |
| 79 |
#define AR9300_BASE_ADDR 0x3ff |
| 80 |
#define AR9300_BASE_ADDR_512 0x1ff |
| 81 |
|
| 82 |
/* AR5416_EEPMISC_BIG_ENDIAN not set indicates little endian */ |
| 83 |
#define AR9300_EEPMISC_LITTLE_ENDIAN 0 |
| 84 |
|
| 85 |
#define AR9300_OTP_BASE(_ah) \ |
| 86 |
((AR_SREV_9340(_ah) || AR_SREV_9550(_ah)) ? 0x30000 : 0x14000) |
| 87 |
#define AR9300_OTP_STATUS(_ah) \ |
| 88 |
((AR_SREV_9340(_ah) || AR_SREV_9550(_ah)) ? 0x31018 : 0x15f18) |
| 89 |
#define AR9300_OTP_STATUS_TYPE 0x7 |
| 90 |
#define AR9300_OTP_STATUS_VALID 0x4 |
| 91 |
#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 |
| 92 |
#define AR9300_OTP_STATUS_SM_BUSY 0x1 |
| 93 |
#define AR9300_OTP_READ_DATA(_ah) \ |
| 94 |
((AR_SREV_9340(_ah) || AR_SREV_9550(_ah)) ? 0x3101c : 0x15f1c) |
| 95 |
|
| 96 |
enum targetPowerHTRates { |
| 97 |
HT_TARGET_RATE_0_8_16, |
| 98 |
HT_TARGET_RATE_1_3_9_11_17_19, |
| 99 |
HT_TARGET_RATE_4, |
| 100 |
HT_TARGET_RATE_5, |
| 101 |
HT_TARGET_RATE_6, |
| 102 |
HT_TARGET_RATE_7, |
| 103 |
HT_TARGET_RATE_12, |
| 104 |
HT_TARGET_RATE_13, |
| 105 |
HT_TARGET_RATE_14, |
| 106 |
HT_TARGET_RATE_15, |
| 107 |
HT_TARGET_RATE_20, |
| 108 |
HT_TARGET_RATE_21, |
| 109 |
HT_TARGET_RATE_22, |
| 110 |
HT_TARGET_RATE_23 |
| 111 |
}; |
| 112 |
|
| 113 |
enum targetPowerLegacyRates { |
| 114 |
LEGACY_TARGET_RATE_6_24, |
| 115 |
LEGACY_TARGET_RATE_36, |
| 116 |
LEGACY_TARGET_RATE_48, |
| 117 |
LEGACY_TARGET_RATE_54 |
| 118 |
}; |
| 119 |
|
| 120 |
enum targetPowerCckRates { |
| 121 |
LEGACY_TARGET_RATE_1L_5L, |
| 122 |
LEGACY_TARGET_RATE_5S, |
| 123 |
LEGACY_TARGET_RATE_11L, |
| 124 |
LEGACY_TARGET_RATE_11S |
| 125 |
}; |
| 126 |
|
| 127 |
enum ar9300_Rates { |
| 128 |
ALL_TARGET_LEGACY_6_24, |
| 129 |
ALL_TARGET_LEGACY_36, |
| 130 |
ALL_TARGET_LEGACY_48, |
| 131 |
ALL_TARGET_LEGACY_54, |
| 132 |
ALL_TARGET_LEGACY_1L_5L, |
| 133 |
ALL_TARGET_LEGACY_5S, |
| 134 |
ALL_TARGET_LEGACY_11L, |
| 135 |
ALL_TARGET_LEGACY_11S, |
| 136 |
ALL_TARGET_HT20_0_8_16, |
| 137 |
ALL_TARGET_HT20_1_3_9_11_17_19, |
| 138 |
ALL_TARGET_HT20_4, |
| 139 |
ALL_TARGET_HT20_5, |
| 140 |
ALL_TARGET_HT20_6, |
| 141 |
ALL_TARGET_HT20_7, |
| 142 |
ALL_TARGET_HT20_12, |
| 143 |
ALL_TARGET_HT20_13, |
| 144 |
ALL_TARGET_HT20_14, |
| 145 |
ALL_TARGET_HT20_15, |
| 146 |
ALL_TARGET_HT20_20, |
| 147 |
ALL_TARGET_HT20_21, |
| 148 |
ALL_TARGET_HT20_22, |
| 149 |
ALL_TARGET_HT20_23, |
| 150 |
ALL_TARGET_HT40_0_8_16, |
| 151 |
ALL_TARGET_HT40_1_3_9_11_17_19, |
| 152 |
ALL_TARGET_HT40_4, |
| 153 |
ALL_TARGET_HT40_5, |
| 154 |
ALL_TARGET_HT40_6, |
| 155 |
ALL_TARGET_HT40_7, |
| 156 |
ALL_TARGET_HT40_12, |
| 157 |
ALL_TARGET_HT40_13, |
| 158 |
ALL_TARGET_HT40_14, |
| 159 |
ALL_TARGET_HT40_15, |
| 160 |
ALL_TARGET_HT40_20, |
| 161 |
ALL_TARGET_HT40_21, |
| 162 |
ALL_TARGET_HT40_22, |
| 163 |
ALL_TARGET_HT40_23, |
| 164 |
ar9300RateSize, |
| 165 |
}; |
| 166 |
|
| 167 |
|
| 168 |
struct eepFlags { |
| 169 |
u8 opFlags; |
| 170 |
u8 eepMisc; |
| 171 |
} __packed; |
| 172 |
|
| 173 |
enum CompressAlgorithm { |
| 174 |
_CompressNone = 0, |
| 175 |
_CompressLzma, |
| 176 |
_CompressPairs, |
| 177 |
_CompressBlock, |
| 178 |
_Compress4, |
| 179 |
_Compress5, |
| 180 |
_Compress6, |
| 181 |
_Compress7, |
| 182 |
}; |
| 183 |
|
| 184 |
struct ar9300_base_eep_hdr { |
| 185 |
__le16 regDmn[2]; |
| 186 |
/* 4 bits tx and 4 bits rx */ |
| 187 |
u8 txrxMask; |
| 188 |
struct eepFlags opCapFlags; |
| 189 |
u8 rfSilent; |
| 190 |
u8 blueToothOptions; |
| 191 |
u8 deviceCap; |
| 192 |
/* takes lower byte in eeprom location */ |
| 193 |
u8 deviceType; |
| 194 |
/* offset in dB to be added to beginning |
| 195 |
* of pdadc table in calibration |
| 196 |
*/ |
| 197 |
int8_t pwrTableOffset; |
| 198 |
u8 params_for_tuning_caps[2]; |
| 199 |
/* |
| 200 |
* bit0 - enable tx temp comp |
| 201 |
* bit1 - enable tx volt comp |
| 202 |
* bit2 - enable fastClock - default to 1 |
| 203 |
* bit3 - enable doubling - default to 1 |
| 204 |
* bit4 - enable internal regulator - default to 1 |
| 205 |
*/ |
| 206 |
u8 featureEnable; |
| 207 |
/* misc flags: bit0 - turn down drivestrength */ |
| 208 |
u8 miscConfiguration; |
| 209 |
u8 eepromWriteEnableGpio; |
| 210 |
u8 wlanDisableGpio; |
| 211 |
u8 wlanLedGpio; |
| 212 |
u8 rxBandSelectGpio; |
| 213 |
u8 txrxgain; |
| 214 |
/* SW controlled internal regulator fields */ |
| 215 |
__le32 swreg; |
| 216 |
} __packed; |
| 217 |
|
| 218 |
struct ar9300_modal_eep_header { |
| 219 |
/* 4 idle, t1, t2, b (4 bits per setting) */ |
| 220 |
__le32 antCtrlCommon; |
| 221 |
/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ |
| 222 |
__le32 antCtrlCommon2; |
| 223 |
/* 6 idle, t, r, rx1, rx12, b (2 bits each) */ |
| 224 |
__le16 antCtrlChain[AR9300_MAX_CHAINS]; |
| 225 |
/* 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ |
| 226 |
u8 xatten1DB[AR9300_MAX_CHAINS]; |
| 227 |
/* 3 xatten1_margin for merlin (0xa20c/b20c 16:12 */ |
| 228 |
u8 xatten1Margin[AR9300_MAX_CHAINS]; |
| 229 |
int8_t tempSlope; |
| 230 |
int8_t voltSlope; |
| 231 |
/* spur channels in usual fbin coding format */ |
| 232 |
u8 spurChans[AR_EEPROM_MODAL_SPURS]; |
| 233 |
/* 3 Check if the register is per chain */ |
| 234 |
int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS]; |
| 235 |
u8 reserved[11]; |
| 236 |
int8_t quick_drop; |
| 237 |
u8 xpaBiasLvl; |
| 238 |
u8 txFrameToDataStart; |
| 239 |
u8 txFrameToPaOn; |
| 240 |
u8 txClip; |
| 241 |
int8_t antennaGain; |
| 242 |
u8 switchSettling; |
| 243 |
int8_t adcDesiredSize; |
| 244 |
u8 txEndToXpaOff; |
| 245 |
u8 txEndToRxOn; |
| 246 |
u8 txFrameToXpaOn; |
| 247 |
u8 thresh62; |
| 248 |
__le32 papdRateMaskHt20; |
| 249 |
__le32 papdRateMaskHt40; |
| 250 |
__le16 switchcomspdt; |
| 251 |
u8 xlna_bias_strength; |
| 252 |
u8 futureModal[7]; |
| 253 |
} __packed; |
| 254 |
|
| 255 |
struct ar9300_cal_data_per_freq_op_loop { |
| 256 |
int8_t refPower; |
| 257 |
/* pdadc voltage at power measurement */ |
| 258 |
u8 voltMeas; |
| 259 |
/* pcdac used for power measurement */ |
| 260 |
u8 tempMeas; |
| 261 |
/* range is -60 to -127 create a mapping equation 1db resolution */ |
| 262 |
int8_t rxNoisefloorCal; |
| 263 |
/*range is same as noisefloor */ |
| 264 |
int8_t rxNoisefloorPower; |
| 265 |
/* temp measured when noisefloor cal was performed */ |
| 266 |
u8 rxTempMeas; |
| 267 |
} __packed; |
| 268 |
|
| 269 |
struct cal_tgt_pow_legacy { |
| 270 |
u8 tPow2x[4]; |
| 271 |
} __packed; |
| 272 |
|
| 273 |
struct cal_tgt_pow_ht { |
| 274 |
u8 tPow2x[14]; |
| 275 |
} __packed; |
| 276 |
|
| 277 |
struct cal_ctl_data_2g { |
| 278 |
u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G]; |
| 279 |
} __packed; |
| 280 |
|
| 281 |
struct cal_ctl_data_5g { |
| 282 |
u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G]; |
| 283 |
} __packed; |
| 284 |
|
| 285 |
#define MAX_BASE_EXTENSION_FUTURE 2 |
| 286 |
|
| 287 |
struct ar9300_BaseExtension_1 { |
| 288 |
u8 ant_div_control; |
| 289 |
u8 future[MAX_BASE_EXTENSION_FUTURE]; |
| 290 |
/* |
| 291 |
* misc_enable: |
| 292 |
* |
| 293 |
* BIT 0 - TX Gain Cap enable. |
| 294 |
* BIT 1 - Uncompressed Checksum enable. |
| 295 |
* BIT 2/3 - MinCCApwr enable 2g/5g. |
| 296 |
*/ |
| 297 |
u8 misc_enable; |
| 298 |
int8_t tempslopextension[8]; |
| 299 |
int8_t quick_drop_low; |
| 300 |
int8_t quick_drop_high; |
| 301 |
} __packed; |
| 302 |
|
| 303 |
struct ar9300_BaseExtension_2 { |
| 304 |
int8_t tempSlopeLow; |
| 305 |
int8_t tempSlopeHigh; |
| 306 |
u8 xatten1DBLow[AR9300_MAX_CHAINS]; |
| 307 |
u8 xatten1MarginLow[AR9300_MAX_CHAINS]; |
| 308 |
u8 xatten1DBHigh[AR9300_MAX_CHAINS]; |
| 309 |
u8 xatten1MarginHigh[AR9300_MAX_CHAINS]; |
| 310 |
} __packed; |
| 311 |
|
| 312 |
struct ar9300_eeprom { |
| 313 |
u8 eepromVersion; |
| 314 |
u8 templateVersion; |
| 315 |
u8 macAddr[6]; |
| 316 |
u8 custData[AR9300_CUSTOMER_DATA_SIZE]; |
| 317 |
|
| 318 |
struct ar9300_base_eep_hdr baseEepHeader; |
| 319 |
|
| 320 |
struct ar9300_modal_eep_header modalHeader2G; |
| 321 |
struct ar9300_BaseExtension_1 base_ext1; |
| 322 |
u8 calFreqPier2G[AR9300_NUM_2G_CAL_PIERS]; |
| 323 |
struct ar9300_cal_data_per_freq_op_loop |
| 324 |
calPierData2G[AR9300_MAX_CHAINS][AR9300_NUM_2G_CAL_PIERS]; |
| 325 |
u8 calTarget_freqbin_Cck[AR9300_NUM_2G_CCK_TARGET_POWERS]; |
| 326 |
u8 calTarget_freqbin_2G[AR9300_NUM_2G_20_TARGET_POWERS]; |
| 327 |
u8 calTarget_freqbin_2GHT20[AR9300_NUM_2G_20_TARGET_POWERS]; |
| 328 |
u8 calTarget_freqbin_2GHT40[AR9300_NUM_2G_40_TARGET_POWERS]; |
| 329 |
struct cal_tgt_pow_legacy |
| 330 |
calTargetPowerCck[AR9300_NUM_2G_CCK_TARGET_POWERS]; |
| 331 |
struct cal_tgt_pow_legacy |
| 332 |
calTargetPower2G[AR9300_NUM_2G_20_TARGET_POWERS]; |
| 333 |
struct cal_tgt_pow_ht |
| 334 |
calTargetPower2GHT20[AR9300_NUM_2G_20_TARGET_POWERS]; |
| 335 |
struct cal_tgt_pow_ht |
| 336 |
calTargetPower2GHT40[AR9300_NUM_2G_40_TARGET_POWERS]; |
| 337 |
u8 ctlIndex_2G[AR9300_NUM_CTLS_2G]; |
| 338 |
u8 ctl_freqbin_2G[AR9300_NUM_CTLS_2G][AR9300_NUM_BAND_EDGES_2G]; |
| 339 |
struct cal_ctl_data_2g ctlPowerData_2G[AR9300_NUM_CTLS_2G]; |
| 340 |
struct ar9300_modal_eep_header modalHeader5G; |
| 341 |
struct ar9300_BaseExtension_2 base_ext2; |
| 342 |
u8 calFreqPier5G[AR9300_NUM_5G_CAL_PIERS]; |
| 343 |
struct ar9300_cal_data_per_freq_op_loop |
| 344 |
calPierData5G[AR9300_MAX_CHAINS][AR9300_NUM_5G_CAL_PIERS]; |
| 345 |
u8 calTarget_freqbin_5G[AR9300_NUM_5G_20_TARGET_POWERS]; |
| 346 |
u8 calTarget_freqbin_5GHT20[AR9300_NUM_5G_20_TARGET_POWERS]; |
| 347 |
u8 calTarget_freqbin_5GHT40[AR9300_NUM_5G_40_TARGET_POWERS]; |
| 348 |
struct cal_tgt_pow_legacy |
| 349 |
calTargetPower5G[AR9300_NUM_5G_20_TARGET_POWERS]; |
| 350 |
struct cal_tgt_pow_ht |
| 351 |
calTargetPower5GHT20[AR9300_NUM_5G_20_TARGET_POWERS]; |
| 352 |
struct cal_tgt_pow_ht |
| 353 |
calTargetPower5GHT40[AR9300_NUM_5G_40_TARGET_POWERS]; |
| 354 |
u8 ctlIndex_5G[AR9300_NUM_CTLS_5G]; |
| 355 |
u8 ctl_freqbin_5G[AR9300_NUM_CTLS_5G][AR9300_NUM_BAND_EDGES_5G]; |
| 356 |
struct cal_ctl_data_5g ctlPowerData_5G[AR9300_NUM_CTLS_5G]; |
| 357 |
} __packed; |
| 358 |
|
| 359 |
s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah); |
| 360 |
s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah); |
| 361 |
u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz); |
| 362 |
u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz); |
| 363 |
|
| 364 |
u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz); |
| 365 |
|
| 366 |
u32 ar9003_get_paprd_rate_mask_ht20(struct ath_hw *ah, bool is2ghz); |
| 367 |
u32 ar9003_get_paprd_rate_mask_ht40(struct ath_hw *ah, bool is2ghz); |
| 368 |
unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah, |
| 369 |
struct ath9k_channel *chan); |
| 370 |
|
| 371 |
void ar9003_hw_internal_regulator_apply(struct ath_hw *ah); |
| 372 |
int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray); |
| 373 |
|
| 374 |
#endif |