| 1 |
/* |
| 2 |
* Copyright (c) 2004-2010 Atheros Communications Inc. |
| 3 |
* Copyright (c) 2011 Qualcomm Atheros, Inc. |
| 4 |
* |
| 5 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 6 |
* purpose with or without fee is hereby granted, provided that the above |
| 7 |
* copyright notice and this permission notice appear in all copies. |
| 8 |
* |
| 9 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 10 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 11 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 12 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 13 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 14 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 15 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 16 |
*/ |
| 17 |
|
| 18 |
#ifndef TARGET_H |
| 19 |
#define TARGET_H |
| 20 |
|
| 21 |
#define AR6003_BOARD_DATA_SZ 1024 |
| 22 |
#define AR6003_BOARD_EXT_DATA_SZ 768 |
| 23 |
#define AR6003_BOARD_EXT_DATA_SZ_V2 1024 |
| 24 |
|
| 25 |
#define AR6004_BOARD_DATA_SZ 6144 |
| 26 |
#define AR6004_BOARD_EXT_DATA_SZ 0 |
| 27 |
|
| 28 |
#define RESET_CONTROL_ADDRESS 0x00004000 |
| 29 |
#define RESET_CONTROL_COLD_RST 0x00000100 |
| 30 |
#define RESET_CONTROL_MBOX_RST 0x00000004 |
| 31 |
|
| 32 |
#define CPU_CLOCK_STANDARD_S 0 |
| 33 |
#define CPU_CLOCK_STANDARD 0x00000003 |
| 34 |
#define CPU_CLOCK_ADDRESS 0x00000020 |
| 35 |
|
| 36 |
#define CLOCK_CONTROL_ADDRESS 0x00000028 |
| 37 |
#define CLOCK_CONTROL_LF_CLK32_S 2 |
| 38 |
#define CLOCK_CONTROL_LF_CLK32 0x00000004 |
| 39 |
|
| 40 |
#define SYSTEM_SLEEP_ADDRESS 0x000000c4 |
| 41 |
#define SYSTEM_SLEEP_DISABLE_S 0 |
| 42 |
#define SYSTEM_SLEEP_DISABLE 0x00000001 |
| 43 |
|
| 44 |
#define LPO_CAL_ADDRESS 0x000000e0 |
| 45 |
#define LPO_CAL_ENABLE_S 20 |
| 46 |
#define LPO_CAL_ENABLE 0x00100000 |
| 47 |
|
| 48 |
#define GPIO_PIN9_ADDRESS 0x0000004c |
| 49 |
#define GPIO_PIN10_ADDRESS 0x00000050 |
| 50 |
#define GPIO_PIN11_ADDRESS 0x00000054 |
| 51 |
#define GPIO_PIN12_ADDRESS 0x00000058 |
| 52 |
#define GPIO_PIN13_ADDRESS 0x0000005c |
| 53 |
|
| 54 |
#define HOST_INT_STATUS_ADDRESS 0x00000400 |
| 55 |
#define HOST_INT_STATUS_ERROR_S 7 |
| 56 |
#define HOST_INT_STATUS_ERROR 0x00000080 |
| 57 |
|
| 58 |
#define HOST_INT_STATUS_CPU_S 6 |
| 59 |
#define HOST_INT_STATUS_CPU 0x00000040 |
| 60 |
|
| 61 |
#define HOST_INT_STATUS_COUNTER_S 4 |
| 62 |
#define HOST_INT_STATUS_COUNTER 0x00000010 |
| 63 |
|
| 64 |
#define CPU_INT_STATUS_ADDRESS 0x00000401 |
| 65 |
|
| 66 |
#define ERROR_INT_STATUS_ADDRESS 0x00000402 |
| 67 |
#define ERROR_INT_STATUS_WAKEUP_S 2 |
| 68 |
#define ERROR_INT_STATUS_WAKEUP 0x00000004 |
| 69 |
|
| 70 |
#define ERROR_INT_STATUS_RX_UNDERFLOW_S 1 |
| 71 |
#define ERROR_INT_STATUS_RX_UNDERFLOW 0x00000002 |
| 72 |
|
| 73 |
#define ERROR_INT_STATUS_TX_OVERFLOW_S 0 |
| 74 |
#define ERROR_INT_STATUS_TX_OVERFLOW 0x00000001 |
| 75 |
|
| 76 |
#define COUNTER_INT_STATUS_ADDRESS 0x00000403 |
| 77 |
#define COUNTER_INT_STATUS_COUNTER_S 0 |
| 78 |
#define COUNTER_INT_STATUS_COUNTER 0x000000ff |
| 79 |
|
| 80 |
#define RX_LOOKAHEAD_VALID_ADDRESS 0x00000405 |
| 81 |
|
| 82 |
#define INT_STATUS_ENABLE_ADDRESS 0x00000418 |
| 83 |
#define INT_STATUS_ENABLE_ERROR_S 7 |
| 84 |
#define INT_STATUS_ENABLE_ERROR 0x00000080 |
| 85 |
|
| 86 |
#define INT_STATUS_ENABLE_CPU_S 6 |
| 87 |
#define INT_STATUS_ENABLE_CPU 0x00000040 |
| 88 |
|
| 89 |
#define INT_STATUS_ENABLE_INT_S 5 |
| 90 |
#define INT_STATUS_ENABLE_INT 0x00000020 |
| 91 |
#define INT_STATUS_ENABLE_COUNTER_S 4 |
| 92 |
#define INT_STATUS_ENABLE_COUNTER 0x00000010 |
| 93 |
|
| 94 |
#define INT_STATUS_ENABLE_MBOX_DATA_S 0 |
| 95 |
#define INT_STATUS_ENABLE_MBOX_DATA 0x0000000f |
| 96 |
|
| 97 |
#define CPU_INT_STATUS_ENABLE_ADDRESS 0x00000419 |
| 98 |
#define CPU_INT_STATUS_ENABLE_BIT_S 0 |
| 99 |
#define CPU_INT_STATUS_ENABLE_BIT 0x000000ff |
| 100 |
|
| 101 |
#define ERROR_STATUS_ENABLE_ADDRESS 0x0000041a |
| 102 |
#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_S 1 |
| 103 |
#define ERROR_STATUS_ENABLE_RX_UNDERFLOW 0x00000002 |
| 104 |
|
| 105 |
#define ERROR_STATUS_ENABLE_TX_OVERFLOW_S 0 |
| 106 |
#define ERROR_STATUS_ENABLE_TX_OVERFLOW 0x00000001 |
| 107 |
|
| 108 |
#define COUNTER_INT_STATUS_ENABLE_ADDRESS 0x0000041b |
| 109 |
#define COUNTER_INT_STATUS_ENABLE_BIT_S 0 |
| 110 |
#define COUNTER_INT_STATUS_ENABLE_BIT 0x000000ff |
| 111 |
|
| 112 |
#define COUNT_ADDRESS 0x00000420 |
| 113 |
|
| 114 |
#define COUNT_DEC_ADDRESS 0x00000440 |
| 115 |
|
| 116 |
#define WINDOW_DATA_ADDRESS 0x00000474 |
| 117 |
#define WINDOW_WRITE_ADDR_ADDRESS 0x00000478 |
| 118 |
#define WINDOW_READ_ADDR_ADDRESS 0x0000047c |
| 119 |
#define CPU_DBG_SEL_ADDRESS 0x00000483 |
| 120 |
#define CPU_DBG_ADDRESS 0x00000484 |
| 121 |
|
| 122 |
#define LOCAL_SCRATCH_ADDRESS 0x000000c0 |
| 123 |
#define ATH6KL_OPTION_SLEEP_DISABLE 0x08 |
| 124 |
|
| 125 |
#define RTC_BASE_ADDRESS 0x00004000 |
| 126 |
#define GPIO_BASE_ADDRESS 0x00014000 |
| 127 |
#define MBOX_BASE_ADDRESS 0x00018000 |
| 128 |
#define ANALOG_INTF_BASE_ADDRESS 0x0001c000 |
| 129 |
|
| 130 |
/* real name of the register is unknown */ |
| 131 |
#define ATH6KL_ANALOG_PLL_REGISTER (ANALOG_INTF_BASE_ADDRESS + 0x284) |
| 132 |
|
| 133 |
#define SM(f, v) (((v) << f##_S) & f) |
| 134 |
#define MS(f, v) (((v) & f) >> f##_S) |
| 135 |
|
| 136 |
/* |
| 137 |
* xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the |
| 138 |
* host_interest structure. |
| 139 |
* |
| 140 |
* Host Interest is shared between Host and Target in order to coordinate |
| 141 |
* between the two, and is intended to remain constant (with additions only |
| 142 |
* at the end). |
| 143 |
*/ |
| 144 |
#define ATH6KL_AR6003_HI_START_ADDR 0x00540600 |
| 145 |
#define ATH6KL_AR6004_HI_START_ADDR 0x00400800 |
| 146 |
|
| 147 |
/* |
| 148 |
* These are items that the Host may need to access |
| 149 |
* via BMI or via the Diagnostic Window. The position |
| 150 |
* of items in this structure must remain constant. |
| 151 |
* across firmware revisions! |
| 152 |
* |
| 153 |
* Types for each item must be fixed size across target and host platforms. |
| 154 |
* The structure is used only to calculate offset for each register with |
| 155 |
* HI_ITEM() macro, no values are stored to it. |
| 156 |
* |
| 157 |
* More items may be added at the end. |
| 158 |
*/ |
| 159 |
struct host_interest { |
| 160 |
/* |
| 161 |
* Pointer to application-defined area, if any. |
| 162 |
* Set by Target application during startup. |
| 163 |
*/ |
| 164 |
u32 hi_app_host_interest; /* 0x00 */ |
| 165 |
|
| 166 |
/* Pointer to register dump area, valid after Target crash. */ |
| 167 |
u32 hi_failure_state; /* 0x04 */ |
| 168 |
|
| 169 |
/* Pointer to debug logging header */ |
| 170 |
u32 hi_dbglog_hdr; /* 0x08 */ |
| 171 |
|
| 172 |
u32 hi_unused1; /* 0x0c */ |
| 173 |
|
| 174 |
/* |
| 175 |
* General-purpose flag bits, similar to ATH6KL_OPTION_* flags. |
| 176 |
* Can be used by application rather than by OS. |
| 177 |
*/ |
| 178 |
u32 hi_option_flag; /* 0x10 */ |
| 179 |
|
| 180 |
/* |
| 181 |
* Boolean that determines whether or not to |
| 182 |
* display messages on the serial port. |
| 183 |
*/ |
| 184 |
u32 hi_serial_enable; /* 0x14 */ |
| 185 |
|
| 186 |
/* Start address of DataSet index, if any */ |
| 187 |
u32 hi_dset_list_head; /* 0x18 */ |
| 188 |
|
| 189 |
/* Override Target application start address */ |
| 190 |
u32 hi_app_start; /* 0x1c */ |
| 191 |
|
| 192 |
/* Clock and voltage tuning */ |
| 193 |
u32 hi_skip_clock_init; /* 0x20 */ |
| 194 |
u32 hi_core_clock_setting; /* 0x24 */ |
| 195 |
u32 hi_cpu_clock_setting; /* 0x28 */ |
| 196 |
u32 hi_system_sleep_setting; /* 0x2c */ |
| 197 |
u32 hi_xtal_control_setting; /* 0x30 */ |
| 198 |
u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ |
| 199 |
u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ |
| 200 |
u32 hi_ref_voltage_trim_setting; /* 0x3c */ |
| 201 |
u32 hi_clock_info; /* 0x40 */ |
| 202 |
|
| 203 |
/* |
| 204 |
* Flash configuration overrides, used only |
| 205 |
* when firmware is not executing from flash. |
| 206 |
* (When using flash, modify the global variables |
| 207 |
* with equivalent names.) |
| 208 |
*/ |
| 209 |
u32 hi_bank0_addr_value; /* 0x44 */ |
| 210 |
u32 hi_bank0_read_value; /* 0x48 */ |
| 211 |
u32 hi_bank0_write_value; /* 0x4c */ |
| 212 |
u32 hi_bank0_config_value; /* 0x50 */ |
| 213 |
|
| 214 |
/* Pointer to Board Data */ |
| 215 |
u32 hi_board_data; /* 0x54 */ |
| 216 |
u32 hi_board_data_initialized; /* 0x58 */ |
| 217 |
|
| 218 |
u32 hi_dset_ram_index_tbl; /* 0x5c */ |
| 219 |
|
| 220 |
u32 hi_desired_baud_rate; /* 0x60 */ |
| 221 |
u32 hi_dbglog_config; /* 0x64 */ |
| 222 |
u32 hi_end_ram_reserve_sz; /* 0x68 */ |
| 223 |
u32 hi_mbox_io_block_sz; /* 0x6c */ |
| 224 |
|
| 225 |
u32 hi_num_bpatch_streams; /* 0x70 -- unused */ |
| 226 |
u32 hi_mbox_isr_yield_limit; /* 0x74 */ |
| 227 |
|
| 228 |
u32 hi_refclk_hz; /* 0x78 */ |
| 229 |
u32 hi_ext_clk_detected; /* 0x7c */ |
| 230 |
u32 hi_dbg_uart_txpin; /* 0x80 */ |
| 231 |
u32 hi_dbg_uart_rxpin; /* 0x84 */ |
| 232 |
u32 hi_hci_uart_baud; /* 0x88 */ |
| 233 |
u32 hi_hci_uart_pin_assignments; /* 0x8C */ |
| 234 |
/* |
| 235 |
* NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts |
| 236 |
* pin |
| 237 |
*/ |
| 238 |
u32 hi_hci_uart_baud_scale_val; /* 0x90 */ |
| 239 |
u32 hi_hci_uart_baud_step_val; /* 0x94 */ |
| 240 |
|
| 241 |
u32 hi_allocram_start; /* 0x98 */ |
| 242 |
u32 hi_allocram_sz; /* 0x9c */ |
| 243 |
u32 hi_hci_bridge_flags; /* 0xa0 */ |
| 244 |
u32 hi_hci_uart_support_pins; /* 0xa4 */ |
| 245 |
/* |
| 246 |
* NOTE: byte [0] = RESET pin (bit 7 is polarity), |
| 247 |
* bytes[1]..bytes[3] are for future use |
| 248 |
*/ |
| 249 |
u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ |
| 250 |
/* |
| 251 |
* 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high |
| 252 |
* [31:16]: wakeup timeout in ms |
| 253 |
*/ |
| 254 |
|
| 255 |
/* Pointer to extended board data */ |
| 256 |
u32 hi_board_ext_data; /* 0xac */ |
| 257 |
u32 hi_board_ext_data_config; /* 0xb0 */ |
| 258 |
|
| 259 |
/* |
| 260 |
* Bit [0] : valid |
| 261 |
* Bit[31:16: size |
| 262 |
*/ |
| 263 |
/* |
| 264 |
* hi_reset_flag is used to do some stuff when target reset. |
| 265 |
* such as restore app_start after warm reset or |
| 266 |
* preserve host Interest area, or preserve ROM data, literals etc. |
| 267 |
*/ |
| 268 |
u32 hi_reset_flag; /* 0xb4 */ |
| 269 |
/* indicate hi_reset_flag is valid */ |
| 270 |
u32 hi_reset_flag_valid; /* 0xb8 */ |
| 271 |
u32 hi_hci_uart_pwr_mgmt_params_ext; /* 0xbc */ |
| 272 |
/* |
| 273 |
* 0xbc - [31:0]: idle timeout in ms |
| 274 |
*/ |
| 275 |
/* ACS flags */ |
| 276 |
u32 hi_acs_flags; /* 0xc0 */ |
| 277 |
u32 hi_console_flags; /* 0xc4 */ |
| 278 |
u32 hi_nvram_state; /* 0xc8 */ |
| 279 |
u32 hi_option_flag2; /* 0xcc */ |
| 280 |
|
| 281 |
/* If non-zero, override values sent to Host in WMI_READY event. */ |
| 282 |
u32 hi_sw_version_override; /* 0xd0 */ |
| 283 |
u32 hi_abi_version_override; /* 0xd4 */ |
| 284 |
|
| 285 |
/* |
| 286 |
* Percentage of high priority RX traffic to total expected RX traffic - |
| 287 |
* applicable only to ar6004 |
| 288 |
*/ |
| 289 |
u32 hi_hp_rx_traffic_ratio; /* 0xd8 */ |
| 290 |
|
| 291 |
/* test applications flags */ |
| 292 |
u32 hi_test_apps_related; /* 0xdc */ |
| 293 |
/* location of test script */ |
| 294 |
u32 hi_ota_testscript; /* 0xe0 */ |
| 295 |
/* location of CAL data */ |
| 296 |
u32 hi_cal_data; /* 0xe4 */ |
| 297 |
/* Number of packet log buffers */ |
| 298 |
u32 hi_pktlog_num_buffers; /* 0xe8 */ |
| 299 |
|
| 300 |
} __packed; |
| 301 |
|
| 302 |
#define HI_ITEM(item) offsetof(struct host_interest, item) |
| 303 |
|
| 304 |
#define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3 |
| 305 |
|
| 306 |
#define HI_OPTION_FW_MODE_IBSS 0x0 |
| 307 |
#define HI_OPTION_FW_MODE_BSS_STA 0x1 |
| 308 |
#define HI_OPTION_FW_MODE_AP 0x2 |
| 309 |
|
| 310 |
#define HI_OPTION_FW_SUBMODE_NONE 0x0 |
| 311 |
#define HI_OPTION_FW_SUBMODE_P2PDEV 0x1 |
| 312 |
#define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 |
| 313 |
#define HI_OPTION_FW_SUBMODE_P2PGO 0x3 |
| 314 |
|
| 315 |
#define HI_OPTION_NUM_DEV_SHIFT 0x9 |
| 316 |
|
| 317 |
#define HI_OPTION_FW_BRIDGE_SHIFT 0x04 |
| 318 |
|
| 319 |
/* Fw Mode/SubMode Mask |
| 320 |
|------------------------------------------------------------------------------| |
| 321 |
| SUB | SUB | SUB | SUB | | | | |
| 322 |
| MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0| |
| 323 |
| (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2) |
| 324 |
|------------------------------------------------------------------------------| |
| 325 |
*/ |
| 326 |
#define HI_OPTION_FW_MODE_BITS 0x2 |
| 327 |
#define HI_OPTION_FW_MODE_SHIFT 0xC |
| 328 |
|
| 329 |
#define HI_OPTION_FW_SUBMODE_BITS 0x2 |
| 330 |
#define HI_OPTION_FW_SUBMODE_SHIFT 0x14 |
| 331 |
|
| 332 |
/* Convert a Target virtual address into a Target physical address */ |
| 333 |
#define AR6003_VTOP(vaddr) ((vaddr) & 0x001fffff) |
| 334 |
#define AR6004_VTOP(vaddr) (vaddr) |
| 335 |
|
| 336 |
#define TARG_VTOP(target_type, vaddr) \ |
| 337 |
(((target_type) == TARGET_TYPE_AR6003) ? AR6003_VTOP(vaddr) : \ |
| 338 |
(((target_type) == TARGET_TYPE_AR6004) ? AR6004_VTOP(vaddr) : 0)) |
| 339 |
|
| 340 |
#define ATH6KL_FWLOG_PAYLOAD_SIZE 1500 |
| 341 |
|
| 342 |
struct ath6kl_dbglog_buf { |
| 343 |
__le32 next; |
| 344 |
__le32 buffer_addr; |
| 345 |
__le32 bufsize; |
| 346 |
__le32 length; |
| 347 |
__le32 count; |
| 348 |
__le32 free; |
| 349 |
} __packed; |
| 350 |
|
| 351 |
struct ath6kl_dbglog_hdr { |
| 352 |
__le32 dbuf_addr; |
| 353 |
__le32 dropped; |
| 354 |
} __packed; |
| 355 |
|
| 356 |
#endif |