| 1 |
/* SPDX-License-Identifier: BSD-3-Clause-Clear */ |
| 2 |
/* |
| 3 |
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. |
| 4 |
* Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| 5 |
*/ |
| 6 |
#include "core.h" |
| 7 |
|
| 8 |
#ifndef ATH11K_HAL_DESC_H |
| 9 |
#define ATH11K_HAL_DESC_H |
| 10 |
|
| 11 |
#define BUFFER_ADDR_INFO0_ADDR GENMASK(31, 0) |
| 12 |
|
| 13 |
#define BUFFER_ADDR_INFO1_ADDR GENMASK(7, 0) |
| 14 |
#define BUFFER_ADDR_INFO1_RET_BUF_MGR GENMASK(10, 8) |
| 15 |
#define BUFFER_ADDR_INFO1_SW_COOKIE GENMASK(31, 11) |
| 16 |
|
| 17 |
struct ath11k_buffer_addr { |
| 18 |
u32 info0; |
| 19 |
u32 info1; |
| 20 |
} __packed; |
| 21 |
|
| 22 |
/* ath11k_buffer_addr |
| 23 |
* |
| 24 |
* info0 |
| 25 |
* Address (lower 32 bits) of the msdu buffer or msdu extension |
| 26 |
* descriptor or Link descriptor |
| 27 |
* |
| 28 |
* addr |
| 29 |
* Address (upper 8 bits) of the msdu buffer or msdu extension |
| 30 |
* descriptor or Link descriptor |
| 31 |
* |
| 32 |
* return_buffer_manager (RBM) |
| 33 |
* Consumer: WBM |
| 34 |
* Producer: SW/FW |
| 35 |
* Indicates to which buffer manager the buffer or MSDU_EXTENSION |
| 36 |
* descriptor or link descriptor that is being pointed to shall be |
| 37 |
* returned after the frame has been processed. It is used by WBM |
| 38 |
* for routing purposes. |
| 39 |
* |
| 40 |
* Values are defined in enum %HAL_RX_BUF_RBM_ |
| 41 |
* |
| 42 |
* sw_buffer_cookie |
| 43 |
* Cookie field exclusively used by SW. HW ignores the contents, |
| 44 |
* accept that it passes the programmed value on to other |
| 45 |
* descriptors together with the physical address. |
| 46 |
* |
| 47 |
* Field can be used by SW to for example associate the buffers |
| 48 |
* physical address with the virtual address. |
| 49 |
*/ |
| 50 |
|
| 51 |
enum hal_tlv_tag { |
| 52 |
HAL_MACTX_CBF_START = 0 /* 0x0 */, |
| 53 |
HAL_PHYRX_DATA = 1 /* 0x1 */, |
| 54 |
HAL_PHYRX_CBF_DATA_RESP = 2 /* 0x2 */, |
| 55 |
HAL_PHYRX_ABORT_REQUEST = 3 /* 0x3 */, |
| 56 |
HAL_PHYRX_USER_ABORT_NOTIFICATION = 4 /* 0x4 */, |
| 57 |
HAL_MACTX_DATA_RESP = 5 /* 0x5 */, |
| 58 |
HAL_MACTX_CBF_DATA = 6 /* 0x6 */, |
| 59 |
HAL_MACTX_CBF_DONE = 7 /* 0x7 */, |
| 60 |
HAL_MACRX_CBF_READ_REQUEST = 8 /* 0x8 */, |
| 61 |
HAL_MACRX_CBF_DATA_REQUEST = 9 /* 0x9 */, |
| 62 |
HAL_MACRX_EXPECT_NDP_RECEPTION = 10 /* 0xa */, |
| 63 |
HAL_MACRX_FREEZE_CAPTURE_CHANNEL = 11 /* 0xb */, |
| 64 |
HAL_MACRX_NDP_TIMEOUT = 12 /* 0xc */, |
| 65 |
HAL_MACRX_ABORT_ACK = 13 /* 0xd */, |
| 66 |
HAL_MACRX_REQ_IMPLICIT_FB = 14 /* 0xe */, |
| 67 |
HAL_MACRX_CHAIN_MASK = 15 /* 0xf */, |
| 68 |
HAL_MACRX_NAP_USER = 16 /* 0x10 */, |
| 69 |
HAL_MACRX_ABORT_REQUEST = 17 /* 0x11 */, |
| 70 |
HAL_PHYTX_OTHER_TRANSMIT_INFO16 = 18 /* 0x12 */, |
| 71 |
HAL_PHYTX_ABORT_ACK = 19 /* 0x13 */, |
| 72 |
HAL_PHYTX_ABORT_REQUEST = 20 /* 0x14 */, |
| 73 |
HAL_PHYTX_PKT_END = 21 /* 0x15 */, |
| 74 |
HAL_PHYTX_PPDU_HEADER_INFO_REQUEST = 22 /* 0x16 */, |
| 75 |
HAL_PHYTX_REQUEST_CTRL_INFO = 23 /* 0x17 */, |
| 76 |
HAL_PHYTX_DATA_REQUEST = 24 /* 0x18 */, |
| 77 |
HAL_PHYTX_BF_CV_LOADING_DONE = 25 /* 0x19 */, |
| 78 |
HAL_PHYTX_NAP_ACK = 26 /* 0x1a */, |
| 79 |
HAL_PHYTX_NAP_DONE = 27 /* 0x1b */, |
| 80 |
HAL_PHYTX_OFF_ACK = 28 /* 0x1c */, |
| 81 |
HAL_PHYTX_ON_ACK = 29 /* 0x1d */, |
| 82 |
HAL_PHYTX_SYNTH_OFF_ACK = 30 /* 0x1e */, |
| 83 |
HAL_PHYTX_DEBUG16 = 31 /* 0x1f */, |
| 84 |
HAL_MACTX_ABORT_REQUEST = 32 /* 0x20 */, |
| 85 |
HAL_MACTX_ABORT_ACK = 33 /* 0x21 */, |
| 86 |
HAL_MACTX_PKT_END = 34 /* 0x22 */, |
| 87 |
HAL_MACTX_PRE_PHY_DESC = 35 /* 0x23 */, |
| 88 |
HAL_MACTX_BF_PARAMS_COMMON = 36 /* 0x24 */, |
| 89 |
HAL_MACTX_BF_PARAMS_PER_USER = 37 /* 0x25 */, |
| 90 |
HAL_MACTX_PREFETCH_CV = 38 /* 0x26 */, |
| 91 |
HAL_MACTX_USER_DESC_COMMON = 39 /* 0x27 */, |
| 92 |
HAL_MACTX_USER_DESC_PER_USER = 40 /* 0x28 */, |
| 93 |
HAL_EXAMPLE_USER_TLV_16 = 41 /* 0x29 */, |
| 94 |
HAL_EXAMPLE_TLV_16 = 42 /* 0x2a */, |
| 95 |
HAL_MACTX_PHY_OFF = 43 /* 0x2b */, |
| 96 |
HAL_MACTX_PHY_ON = 44 /* 0x2c */, |
| 97 |
HAL_MACTX_SYNTH_OFF = 45 /* 0x2d */, |
| 98 |
HAL_MACTX_EXPECT_CBF_COMMON = 46 /* 0x2e */, |
| 99 |
HAL_MACTX_EXPECT_CBF_PER_USER = 47 /* 0x2f */, |
| 100 |
HAL_MACTX_PHY_DESC = 48 /* 0x30 */, |
| 101 |
HAL_MACTX_L_SIG_A = 49 /* 0x31 */, |
| 102 |
HAL_MACTX_L_SIG_B = 50 /* 0x32 */, |
| 103 |
HAL_MACTX_HT_SIG = 51 /* 0x33 */, |
| 104 |
HAL_MACTX_VHT_SIG_A = 52 /* 0x34 */, |
| 105 |
HAL_MACTX_VHT_SIG_B_SU20 = 53 /* 0x35 */, |
| 106 |
HAL_MACTX_VHT_SIG_B_SU40 = 54 /* 0x36 */, |
| 107 |
HAL_MACTX_VHT_SIG_B_SU80 = 55 /* 0x37 */, |
| 108 |
HAL_MACTX_VHT_SIG_B_SU160 = 56 /* 0x38 */, |
| 109 |
HAL_MACTX_VHT_SIG_B_MU20 = 57 /* 0x39 */, |
| 110 |
HAL_MACTX_VHT_SIG_B_MU40 = 58 /* 0x3a */, |
| 111 |
HAL_MACTX_VHT_SIG_B_MU80 = 59 /* 0x3b */, |
| 112 |
HAL_MACTX_VHT_SIG_B_MU160 = 60 /* 0x3c */, |
| 113 |
HAL_MACTX_SERVICE = 61 /* 0x3d */, |
| 114 |
HAL_MACTX_HE_SIG_A_SU = 62 /* 0x3e */, |
| 115 |
HAL_MACTX_HE_SIG_A_MU_DL = 63 /* 0x3f */, |
| 116 |
HAL_MACTX_HE_SIG_A_MU_UL = 64 /* 0x40 */, |
| 117 |
HAL_MACTX_HE_SIG_B1_MU = 65 /* 0x41 */, |
| 118 |
HAL_MACTX_HE_SIG_B2_MU = 66 /* 0x42 */, |
| 119 |
HAL_MACTX_HE_SIG_B2_OFDMA = 67 /* 0x43 */, |
| 120 |
HAL_MACTX_DELETE_CV = 68 /* 0x44 */, |
| 121 |
HAL_MACTX_MU_UPLINK_COMMON = 69 /* 0x45 */, |
| 122 |
HAL_MACTX_MU_UPLINK_USER_SETUP = 70 /* 0x46 */, |
| 123 |
HAL_MACTX_OTHER_TRANSMIT_INFO = 71 /* 0x47 */, |
| 124 |
HAL_MACTX_PHY_NAP = 72 /* 0x48 */, |
| 125 |
HAL_MACTX_DEBUG = 73 /* 0x49 */, |
| 126 |
HAL_PHYRX_ABORT_ACK = 74 /* 0x4a */, |
| 127 |
HAL_PHYRX_GENERATED_CBF_DETAILS = 75 /* 0x4b */, |
| 128 |
HAL_PHYRX_RSSI_LEGACY = 76 /* 0x4c */, |
| 129 |
HAL_PHYRX_RSSI_HT = 77 /* 0x4d */, |
| 130 |
HAL_PHYRX_USER_INFO = 78 /* 0x4e */, |
| 131 |
HAL_PHYRX_PKT_END = 79 /* 0x4f */, |
| 132 |
HAL_PHYRX_DEBUG = 80 /* 0x50 */, |
| 133 |
HAL_PHYRX_CBF_TRANSFER_DONE = 81 /* 0x51 */, |
| 134 |
HAL_PHYRX_CBF_TRANSFER_ABORT = 82 /* 0x52 */, |
| 135 |
HAL_PHYRX_L_SIG_A = 83 /* 0x53 */, |
| 136 |
HAL_PHYRX_L_SIG_B = 84 /* 0x54 */, |
| 137 |
HAL_PHYRX_HT_SIG = 85 /* 0x55 */, |
| 138 |
HAL_PHYRX_VHT_SIG_A = 86 /* 0x56 */, |
| 139 |
HAL_PHYRX_VHT_SIG_B_SU20 = 87 /* 0x57 */, |
| 140 |
HAL_PHYRX_VHT_SIG_B_SU40 = 88 /* 0x58 */, |
| 141 |
HAL_PHYRX_VHT_SIG_B_SU80 = 89 /* 0x59 */, |
| 142 |
HAL_PHYRX_VHT_SIG_B_SU160 = 90 /* 0x5a */, |
| 143 |
HAL_PHYRX_VHT_SIG_B_MU20 = 91 /* 0x5b */, |
| 144 |
HAL_PHYRX_VHT_SIG_B_MU40 = 92 /* 0x5c */, |
| 145 |
HAL_PHYRX_VHT_SIG_B_MU80 = 93 /* 0x5d */, |
| 146 |
HAL_PHYRX_VHT_SIG_B_MU160 = 94 /* 0x5e */, |
| 147 |
HAL_PHYRX_HE_SIG_A_SU = 95 /* 0x5f */, |
| 148 |
HAL_PHYRX_HE_SIG_A_MU_DL = 96 /* 0x60 */, |
| 149 |
HAL_PHYRX_HE_SIG_A_MU_UL = 97 /* 0x61 */, |
| 150 |
HAL_PHYRX_HE_SIG_B1_MU = 98 /* 0x62 */, |
| 151 |
HAL_PHYRX_HE_SIG_B2_MU = 99 /* 0x63 */, |
| 152 |
HAL_PHYRX_HE_SIG_B2_OFDMA = 100 /* 0x64 */, |
| 153 |
HAL_PHYRX_OTHER_RECEIVE_INFO = 101 /* 0x65 */, |
| 154 |
HAL_PHYRX_COMMON_USER_INFO = 102 /* 0x66 */, |
| 155 |
HAL_PHYRX_DATA_DONE = 103 /* 0x67 */, |
| 156 |
HAL_RECEIVE_RSSI_INFO = 104 /* 0x68 */, |
| 157 |
HAL_RECEIVE_USER_INFO = 105 /* 0x69 */, |
| 158 |
HAL_MIMO_CONTROL_INFO = 106 /* 0x6a */, |
| 159 |
HAL_RX_LOCATION_INFO = 107 /* 0x6b */, |
| 160 |
HAL_COEX_TX_REQ = 108 /* 0x6c */, |
| 161 |
HAL_DUMMY = 109 /* 0x6d */, |
| 162 |
HAL_RX_TIMING_OFFSET_INFO = 110 /* 0x6e */, |
| 163 |
HAL_EXAMPLE_TLV_32_NAME = 111 /* 0x6f */, |
| 164 |
HAL_MPDU_LIMIT = 112 /* 0x70 */, |
| 165 |
HAL_NA_LENGTH_END = 113 /* 0x71 */, |
| 166 |
HAL_OLE_BUF_STATUS = 114 /* 0x72 */, |
| 167 |
HAL_PCU_PPDU_SETUP_DONE = 115 /* 0x73 */, |
| 168 |
HAL_PCU_PPDU_SETUP_END = 116 /* 0x74 */, |
| 169 |
HAL_PCU_PPDU_SETUP_INIT = 117 /* 0x75 */, |
| 170 |
HAL_PCU_PPDU_SETUP_START = 118 /* 0x76 */, |
| 171 |
HAL_PDG_FES_SETUP = 119 /* 0x77 */, |
| 172 |
HAL_PDG_RESPONSE = 120 /* 0x78 */, |
| 173 |
HAL_PDG_TX_REQ = 121 /* 0x79 */, |
| 174 |
HAL_SCH_WAIT_INSTR = 122 /* 0x7a */, |
| 175 |
HAL_SCHEDULER_TLV = 123 /* 0x7b */, |
| 176 |
HAL_TQM_FLOW_EMPTY_STATUS = 124 /* 0x7c */, |
| 177 |
HAL_TQM_FLOW_NOT_EMPTY_STATUS = 125 /* 0x7d */, |
| 178 |
HAL_TQM_GEN_MPDU_LENGTH_LIST = 126 /* 0x7e */, |
| 179 |
HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS = 127 /* 0x7f */, |
| 180 |
HAL_TQM_GEN_MPDUS = 128 /* 0x80 */, |
| 181 |
HAL_TQM_GEN_MPDUS_STATUS = 129 /* 0x81 */, |
| 182 |
HAL_TQM_REMOVE_MPDU = 130 /* 0x82 */, |
| 183 |
HAL_TQM_REMOVE_MPDU_STATUS = 131 /* 0x83 */, |
| 184 |
HAL_TQM_REMOVE_MSDU = 132 /* 0x84 */, |
| 185 |
HAL_TQM_REMOVE_MSDU_STATUS = 133 /* 0x85 */, |
| 186 |
HAL_TQM_UPDATE_TX_MPDU_COUNT = 134 /* 0x86 */, |
| 187 |
HAL_TQM_WRITE_CMD = 135 /* 0x87 */, |
| 188 |
HAL_OFDMA_TRIGGER_DETAILS = 136 /* 0x88 */, |
| 189 |
HAL_TX_DATA = 137 /* 0x89 */, |
| 190 |
HAL_TX_FES_SETUP = 138 /* 0x8a */, |
| 191 |
HAL_RX_PACKET = 139 /* 0x8b */, |
| 192 |
HAL_EXPECTED_RESPONSE = 140 /* 0x8c */, |
| 193 |
HAL_TX_MPDU_END = 141 /* 0x8d */, |
| 194 |
HAL_TX_MPDU_START = 142 /* 0x8e */, |
| 195 |
HAL_TX_MSDU_END = 143 /* 0x8f */, |
| 196 |
HAL_TX_MSDU_START = 144 /* 0x90 */, |
| 197 |
HAL_TX_SW_MODE_SETUP = 145 /* 0x91 */, |
| 198 |
HAL_TXPCU_BUFFER_STATUS = 146 /* 0x92 */, |
| 199 |
HAL_TXPCU_USER_BUFFER_STATUS = 147 /* 0x93 */, |
| 200 |
HAL_DATA_TO_TIME_CONFIG = 148 /* 0x94 */, |
| 201 |
HAL_EXAMPLE_USER_TLV_32 = 149 /* 0x95 */, |
| 202 |
HAL_MPDU_INFO = 150 /* 0x96 */, |
| 203 |
HAL_PDG_USER_SETUP = 151 /* 0x97 */, |
| 204 |
HAL_TX_11AH_SETUP = 152 /* 0x98 */, |
| 205 |
HAL_REO_UPDATE_RX_REO_QUEUE_STATUS = 153 /* 0x99 */, |
| 206 |
HAL_TX_PEER_ENTRY = 154 /* 0x9a */, |
| 207 |
HAL_TX_RAW_OR_NATIVE_FRAME_SETUP = 155 /* 0x9b */, |
| 208 |
HAL_EXAMPLE_STRUCT_NAME = 156 /* 0x9c */, |
| 209 |
HAL_PCU_PPDU_SETUP_END_INFO = 157 /* 0x9d */, |
| 210 |
HAL_PPDU_RATE_SETTING = 158 /* 0x9e */, |
| 211 |
HAL_PROT_RATE_SETTING = 159 /* 0x9f */, |
| 212 |
HAL_RX_MPDU_DETAILS = 160 /* 0xa0 */, |
| 213 |
HAL_EXAMPLE_USER_TLV_42 = 161 /* 0xa1 */, |
| 214 |
HAL_RX_MSDU_LINK = 162 /* 0xa2 */, |
| 215 |
HAL_RX_REO_QUEUE = 163 /* 0xa3 */, |
| 216 |
HAL_ADDR_SEARCH_ENTRY = 164 /* 0xa4 */, |
| 217 |
HAL_SCHEDULER_CMD = 165 /* 0xa5 */, |
| 218 |
HAL_TX_FLUSH = 166 /* 0xa6 */, |
| 219 |
HAL_TQM_ENTRANCE_RING = 167 /* 0xa7 */, |
| 220 |
HAL_TX_DATA_WORD = 168 /* 0xa8 */, |
| 221 |
HAL_TX_MPDU_DETAILS = 169 /* 0xa9 */, |
| 222 |
HAL_TX_MPDU_LINK = 170 /* 0xaa */, |
| 223 |
HAL_TX_MPDU_LINK_PTR = 171 /* 0xab */, |
| 224 |
HAL_TX_MPDU_QUEUE_HEAD = 172 /* 0xac */, |
| 225 |
HAL_TX_MPDU_QUEUE_EXT = 173 /* 0xad */, |
| 226 |
HAL_TX_MPDU_QUEUE_EXT_PTR = 174 /* 0xae */, |
| 227 |
HAL_TX_MSDU_DETAILS = 175 /* 0xaf */, |
| 228 |
HAL_TX_MSDU_EXTENSION = 176 /* 0xb0 */, |
| 229 |
HAL_TX_MSDU_FLOW = 177 /* 0xb1 */, |
| 230 |
HAL_TX_MSDU_LINK = 178 /* 0xb2 */, |
| 231 |
HAL_TX_MSDU_LINK_ENTRY_PTR = 179 /* 0xb3 */, |
| 232 |
HAL_RESPONSE_RATE_SETTING = 180 /* 0xb4 */, |
| 233 |
HAL_TXPCU_BUFFER_BASICS = 181 /* 0xb5 */, |
| 234 |
HAL_UNIFORM_DESCRIPTOR_HEADER = 182 /* 0xb6 */, |
| 235 |
HAL_UNIFORM_TQM_CMD_HEADER = 183 /* 0xb7 */, |
| 236 |
HAL_UNIFORM_TQM_STATUS_HEADER = 184 /* 0xb8 */, |
| 237 |
HAL_USER_RATE_SETTING = 185 /* 0xb9 */, |
| 238 |
HAL_WBM_BUFFER_RING = 186 /* 0xba */, |
| 239 |
HAL_WBM_LINK_DESCRIPTOR_RING = 187 /* 0xbb */, |
| 240 |
HAL_WBM_RELEASE_RING = 188 /* 0xbc */, |
| 241 |
HAL_TX_FLUSH_REQ = 189 /* 0xbd */, |
| 242 |
HAL_RX_MSDU_DETAILS = 190 /* 0xbe */, |
| 243 |
HAL_TQM_WRITE_CMD_STATUS = 191 /* 0xbf */, |
| 244 |
HAL_TQM_GET_MPDU_QUEUE_STATS = 192 /* 0xc0 */, |
| 245 |
HAL_TQM_GET_MSDU_FLOW_STATS = 193 /* 0xc1 */, |
| 246 |
HAL_EXAMPLE_USER_CTLV_32 = 194 /* 0xc2 */, |
| 247 |
HAL_TX_FES_STATUS_START = 195 /* 0xc3 */, |
| 248 |
HAL_TX_FES_STATUS_USER_PPDU = 196 /* 0xc4 */, |
| 249 |
HAL_TX_FES_STATUS_USER_RESPONSE = 197 /* 0xc5 */, |
| 250 |
HAL_TX_FES_STATUS_END = 198 /* 0xc6 */, |
| 251 |
HAL_RX_TRIG_INFO = 199 /* 0xc7 */, |
| 252 |
HAL_RXPCU_TX_SETUP_CLEAR = 200 /* 0xc8 */, |
| 253 |
HAL_RX_FRAME_BITMAP_REQ = 201 /* 0xc9 */, |
| 254 |
HAL_RX_FRAME_BITMAP_ACK = 202 /* 0xca */, |
| 255 |
HAL_COEX_RX_STATUS = 203 /* 0xcb */, |
| 256 |
HAL_RX_START_PARAM = 204 /* 0xcc */, |
| 257 |
HAL_RX_PPDU_START = 205 /* 0xcd */, |
| 258 |
HAL_RX_PPDU_END = 206 /* 0xce */, |
| 259 |
HAL_RX_MPDU_START = 207 /* 0xcf */, |
| 260 |
HAL_RX_MPDU_END = 208 /* 0xd0 */, |
| 261 |
HAL_RX_MSDU_START = 209 /* 0xd1 */, |
| 262 |
HAL_RX_MSDU_END = 210 /* 0xd2 */, |
| 263 |
HAL_RX_ATTENTION = 211 /* 0xd3 */, |
| 264 |
HAL_RECEIVED_RESPONSE_INFO = 212 /* 0xd4 */, |
| 265 |
HAL_RX_PHY_SLEEP = 213 /* 0xd5 */, |
| 266 |
HAL_RX_HEADER = 214 /* 0xd6 */, |
| 267 |
HAL_RX_PEER_ENTRY = 215 /* 0xd7 */, |
| 268 |
HAL_RX_FLUSH = 216 /* 0xd8 */, |
| 269 |
HAL_RX_RESPONSE_REQUIRED_INFO = 217 /* 0xd9 */, |
| 270 |
HAL_RX_FRAMELESS_BAR_DETAILS = 218 /* 0xda */, |
| 271 |
HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS = 219 /* 0xdb */, |
| 272 |
HAL_TQM_GET_MSDU_FLOW_STATS_STATUS = 220 /* 0xdc */, |
| 273 |
HAL_TX_CBF_INFO = 221 /* 0xdd */, |
| 274 |
HAL_PCU_PPDU_SETUP_USER = 222 /* 0xde */, |
| 275 |
HAL_RX_MPDU_PCU_START = 223 /* 0xdf */, |
| 276 |
HAL_RX_PM_INFO = 224 /* 0xe0 */, |
| 277 |
HAL_RX_USER_PPDU_END = 225 /* 0xe1 */, |
| 278 |
HAL_RX_PRE_PPDU_START = 226 /* 0xe2 */, |
| 279 |
HAL_RX_PREAMBLE = 227 /* 0xe3 */, |
| 280 |
HAL_TX_FES_SETUP_COMPLETE = 228 /* 0xe4 */, |
| 281 |
HAL_TX_LAST_MPDU_FETCHED = 229 /* 0xe5 */, |
| 282 |
HAL_TXDMA_STOP_REQUEST = 230 /* 0xe6 */, |
| 283 |
HAL_RXPCU_SETUP = 231 /* 0xe7 */, |
| 284 |
HAL_RXPCU_USER_SETUP = 232 /* 0xe8 */, |
| 285 |
HAL_TX_FES_STATUS_ACK_OR_BA = 233 /* 0xe9 */, |
| 286 |
HAL_TQM_ACKED_MPDU = 234 /* 0xea */, |
| 287 |
HAL_COEX_TX_RESP = 235 /* 0xeb */, |
| 288 |
HAL_COEX_TX_STATUS = 236 /* 0xec */, |
| 289 |
HAL_MACTX_COEX_PHY_CTRL = 237 /* 0xed */, |
| 290 |
HAL_COEX_STATUS_BROADCAST = 238 /* 0xee */, |
| 291 |
HAL_RESPONSE_START_STATUS = 239 /* 0xef */, |
| 292 |
HAL_RESPONSE_END_STATUS = 240 /* 0xf0 */, |
| 293 |
HAL_CRYPTO_STATUS = 241 /* 0xf1 */, |
| 294 |
HAL_RECEIVED_TRIGGER_INFO = 242 /* 0xf2 */, |
| 295 |
HAL_REO_ENTRANCE_RING = 243 /* 0xf3 */, |
| 296 |
HAL_RX_MPDU_LINK = 244 /* 0xf4 */, |
| 297 |
HAL_COEX_TX_STOP_CTRL = 245 /* 0xf5 */, |
| 298 |
HAL_RX_PPDU_ACK_REPORT = 246 /* 0xf6 */, |
| 299 |
HAL_RX_PPDU_NO_ACK_REPORT = 247 /* 0xf7 */, |
| 300 |
HAL_SCH_COEX_STATUS = 248 /* 0xf8 */, |
| 301 |
HAL_SCHEDULER_COMMAND_STATUS = 249 /* 0xf9 */, |
| 302 |
HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 250 /* 0xfa */, |
| 303 |
HAL_TX_FES_STATUS_PROT = 251 /* 0xfb */, |
| 304 |
HAL_TX_FES_STATUS_START_PPDU = 252 /* 0xfc */, |
| 305 |
HAL_TX_FES_STATUS_START_PROT = 253 /* 0xfd */, |
| 306 |
HAL_TXPCU_PHYTX_DEBUG32 = 254 /* 0xfe */, |
| 307 |
HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32 = 255 /* 0xff */, |
| 308 |
HAL_TX_MPDU_COUNT_TRANSFER_END = 256 /* 0x100 */, |
| 309 |
HAL_WHO_ANCHOR_OFFSET = 257 /* 0x101 */, |
| 310 |
HAL_WHO_ANCHOR_VALUE = 258 /* 0x102 */, |
| 311 |
HAL_WHO_CCE_INFO = 259 /* 0x103 */, |
| 312 |
HAL_WHO_COMMIT = 260 /* 0x104 */, |
| 313 |
HAL_WHO_COMMIT_DONE = 261 /* 0x105 */, |
| 314 |
HAL_WHO_FLUSH = 262 /* 0x106 */, |
| 315 |
HAL_WHO_L2_LLC = 263 /* 0x107 */, |
| 316 |
HAL_WHO_L2_PAYLOAD = 264 /* 0x108 */, |
| 317 |
HAL_WHO_L3_CHECKSUM = 265 /* 0x109 */, |
| 318 |
HAL_WHO_L3_INFO = 266 /* 0x10a */, |
| 319 |
HAL_WHO_L4_CHECKSUM = 267 /* 0x10b */, |
| 320 |
HAL_WHO_L4_INFO = 268 /* 0x10c */, |
| 321 |
HAL_WHO_MSDU = 269 /* 0x10d */, |
| 322 |
HAL_WHO_MSDU_MISC = 270 /* 0x10e */, |
| 323 |
HAL_WHO_PACKET_DATA = 271 /* 0x10f */, |
| 324 |
HAL_WHO_PACKET_HDR = 272 /* 0x110 */, |
| 325 |
HAL_WHO_PPDU_END = 273 /* 0x111 */, |
| 326 |
HAL_WHO_PPDU_START = 274 /* 0x112 */, |
| 327 |
HAL_WHO_TSO = 275 /* 0x113 */, |
| 328 |
HAL_WHO_WMAC_HEADER_PV0 = 276 /* 0x114 */, |
| 329 |
HAL_WHO_WMAC_HEADER_PV1 = 277 /* 0x115 */, |
| 330 |
HAL_WHO_WMAC_IV = 278 /* 0x116 */, |
| 331 |
HAL_MPDU_INFO_END = 279 /* 0x117 */, |
| 332 |
HAL_MPDU_INFO_BITMAP = 280 /* 0x118 */, |
| 333 |
HAL_TX_QUEUE_EXTENSION = 281 /* 0x119 */, |
| 334 |
HAL_RX_PEER_ENTRY_DETAILS = 282 /* 0x11a */, |
| 335 |
HAL_RX_REO_QUEUE_REFERENCE = 283 /* 0x11b */, |
| 336 |
HAL_RX_REO_QUEUE_EXT = 284 /* 0x11c */, |
| 337 |
HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS = 285 /* 0x11d */, |
| 338 |
HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS = 286 /* 0x11e */, |
| 339 |
HAL_TQM_ACKED_MPDU_STATUS = 287 /* 0x11f */, |
| 340 |
HAL_TQM_ADD_MSDU_STATUS = 288 /* 0x120 */, |
| 341 |
HAL_RX_MPDU_LINK_PTR = 289 /* 0x121 */, |
| 342 |
HAL_REO_DESTINATION_RING = 290 /* 0x122 */, |
| 343 |
HAL_TQM_LIST_GEN_DONE = 291 /* 0x123 */, |
| 344 |
HAL_WHO_TERMINATE = 292 /* 0x124 */, |
| 345 |
HAL_TX_LAST_MPDU_END = 293 /* 0x125 */, |
| 346 |
HAL_TX_CV_DATA = 294 /* 0x126 */, |
| 347 |
HAL_TCL_ENTRANCE_FROM_PPE_RING = 295 /* 0x127 */, |
| 348 |
HAL_PPDU_TX_END = 296 /* 0x128 */, |
| 349 |
HAL_PROT_TX_END = 297 /* 0x129 */, |
| 350 |
HAL_PDG_RESPONSE_RATE_SETTING = 298 /* 0x12a */, |
| 351 |
HAL_MPDU_INFO_GLOBAL_END = 299 /* 0x12b */, |
| 352 |
HAL_TQM_SCH_INSTR_GLOBAL_END = 300 /* 0x12c */, |
| 353 |
HAL_RX_PPDU_END_USER_STATS = 301 /* 0x12d */, |
| 354 |
HAL_RX_PPDU_END_USER_STATS_EXT = 302 /* 0x12e */, |
| 355 |
HAL_NO_ACK_REPORT = 303 /* 0x12f */, |
| 356 |
HAL_ACK_REPORT = 304 /* 0x130 */, |
| 357 |
HAL_UNIFORM_REO_CMD_HEADER = 305 /* 0x131 */, |
| 358 |
HAL_REO_GET_QUEUE_STATS = 306 /* 0x132 */, |
| 359 |
HAL_REO_FLUSH_QUEUE = 307 /* 0x133 */, |
| 360 |
HAL_REO_FLUSH_CACHE = 308 /* 0x134 */, |
| 361 |
HAL_REO_UNBLOCK_CACHE = 309 /* 0x135 */, |
| 362 |
HAL_UNIFORM_REO_STATUS_HEADER = 310 /* 0x136 */, |
| 363 |
HAL_REO_GET_QUEUE_STATS_STATUS = 311 /* 0x137 */, |
| 364 |
HAL_REO_FLUSH_QUEUE_STATUS = 312 /* 0x138 */, |
| 365 |
HAL_REO_FLUSH_CACHE_STATUS = 313 /* 0x139 */, |
| 366 |
HAL_REO_UNBLOCK_CACHE_STATUS = 314 /* 0x13a */, |
| 367 |
HAL_TQM_FLUSH_CACHE = 315 /* 0x13b */, |
| 368 |
HAL_TQM_UNBLOCK_CACHE = 316 /* 0x13c */, |
| 369 |
HAL_TQM_FLUSH_CACHE_STATUS = 317 /* 0x13d */, |
| 370 |
HAL_TQM_UNBLOCK_CACHE_STATUS = 318 /* 0x13e */, |
| 371 |
HAL_RX_PPDU_END_STATUS_DONE = 319 /* 0x13f */, |
| 372 |
HAL_RX_STATUS_BUFFER_DONE = 320 /* 0x140 */, |
| 373 |
HAL_BUFFER_ADDR_INFO = 321 /* 0x141 */, |
| 374 |
HAL_RX_MSDU_DESC_INFO = 322 /* 0x142 */, |
| 375 |
HAL_RX_MPDU_DESC_INFO = 323 /* 0x143 */, |
| 376 |
HAL_TCL_DATA_CMD = 324 /* 0x144 */, |
| 377 |
HAL_TCL_GSE_CMD = 325 /* 0x145 */, |
| 378 |
HAL_TCL_EXIT_BASE = 326 /* 0x146 */, |
| 379 |
HAL_TCL_COMPACT_EXIT_RING = 327 /* 0x147 */, |
| 380 |
HAL_TCL_REGULAR_EXIT_RING = 328 /* 0x148 */, |
| 381 |
HAL_TCL_EXTENDED_EXIT_RING = 329 /* 0x149 */, |
| 382 |
HAL_UPLINK_COMMON_INFO = 330 /* 0x14a */, |
| 383 |
HAL_UPLINK_USER_SETUP_INFO = 331 /* 0x14b */, |
| 384 |
HAL_TX_DATA_SYNC = 332 /* 0x14c */, |
| 385 |
HAL_PHYRX_CBF_READ_REQUEST_ACK = 333 /* 0x14d */, |
| 386 |
HAL_TCL_STATUS_RING = 334 /* 0x14e */, |
| 387 |
HAL_TQM_GET_MPDU_HEAD_INFO = 335 /* 0x14f */, |
| 388 |
HAL_TQM_SYNC_CMD = 336 /* 0x150 */, |
| 389 |
HAL_TQM_GET_MPDU_HEAD_INFO_STATUS = 337 /* 0x151 */, |
| 390 |
HAL_TQM_SYNC_CMD_STATUS = 338 /* 0x152 */, |
| 391 |
HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 339 /* 0x153 */, |
| 392 |
HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 340 /* 0x154 */, |
| 393 |
HAL_REO_FLUSH_TIMEOUT_LIST = 341 /* 0x155 */, |
| 394 |
HAL_REO_FLUSH_TIMEOUT_LIST_STATUS = 342 /* 0x156 */, |
| 395 |
HAL_REO_TO_PPE_RING = 343 /* 0x157 */, |
| 396 |
HAL_RX_MPDU_INFO = 344 /* 0x158 */, |
| 397 |
HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 345 /* 0x159 */, |
| 398 |
HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 346 /* 0x15a */, |
| 399 |
HAL_EXAMPLE_USER_TLV_32_NAME = 347 /* 0x15b */, |
| 400 |
HAL_RX_PPDU_START_USER_INFO = 348 /* 0x15c */, |
| 401 |
HAL_RX_RXPCU_CLASSIFICATION_OVERVIEW = 349 /* 0x15d */, |
| 402 |
HAL_RX_RING_MASK = 350 /* 0x15e */, |
| 403 |
HAL_WHO_CLASSIFY_INFO = 351 /* 0x15f */, |
| 404 |
HAL_TXPT_CLASSIFY_INFO = 352 /* 0x160 */, |
| 405 |
HAL_RXPT_CLASSIFY_INFO = 353 /* 0x161 */, |
| 406 |
HAL_TX_FLOW_SEARCH_ENTRY = 354 /* 0x162 */, |
| 407 |
HAL_RX_FLOW_SEARCH_ENTRY = 355 /* 0x163 */, |
| 408 |
HAL_RECEIVED_TRIGGER_INFO_DETAILS = 356 /* 0x164 */, |
| 409 |
HAL_COEX_MAC_NAP = 357 /* 0x165 */, |
| 410 |
HAL_MACRX_ABORT_REQUEST_INFO = 358 /* 0x166 */, |
| 411 |
HAL_MACTX_ABORT_REQUEST_INFO = 359 /* 0x167 */, |
| 412 |
HAL_PHYRX_ABORT_REQUEST_INFO = 360 /* 0x168 */, |
| 413 |
HAL_PHYTX_ABORT_REQUEST_INFO = 361 /* 0x169 */, |
| 414 |
HAL_RXPCU_PPDU_END_INFO = 362 /* 0x16a */, |
| 415 |
HAL_WHO_MESH_CONTROL = 363 /* 0x16b */, |
| 416 |
HAL_L_SIG_A_INFO = 364 /* 0x16c */, |
| 417 |
HAL_L_SIG_B_INFO = 365 /* 0x16d */, |
| 418 |
HAL_HT_SIG_INFO = 366 /* 0x16e */, |
| 419 |
HAL_VHT_SIG_A_INFO = 367 /* 0x16f */, |
| 420 |
HAL_VHT_SIG_B_SU20_INFO = 368 /* 0x170 */, |
| 421 |
HAL_VHT_SIG_B_SU40_INFO = 369 /* 0x171 */, |
| 422 |
HAL_VHT_SIG_B_SU80_INFO = 370 /* 0x172 */, |
| 423 |
HAL_VHT_SIG_B_SU160_INFO = 371 /* 0x173 */, |
| 424 |
HAL_VHT_SIG_B_MU20_INFO = 372 /* 0x174 */, |
| 425 |
HAL_VHT_SIG_B_MU40_INFO = 373 /* 0x175 */, |
| 426 |
HAL_VHT_SIG_B_MU80_INFO = 374 /* 0x176 */, |
| 427 |
HAL_VHT_SIG_B_MU160_INFO = 375 /* 0x177 */, |
| 428 |
HAL_SERVICE_INFO = 376 /* 0x178 */, |
| 429 |
HAL_HE_SIG_A_SU_INFO = 377 /* 0x179 */, |
| 430 |
HAL_HE_SIG_A_MU_DL_INFO = 378 /* 0x17a */, |
| 431 |
HAL_HE_SIG_A_MU_UL_INFO = 379 /* 0x17b */, |
| 432 |
HAL_HE_SIG_B1_MU_INFO = 380 /* 0x17c */, |
| 433 |
HAL_HE_SIG_B2_MU_INFO = 381 /* 0x17d */, |
| 434 |
HAL_HE_SIG_B2_OFDMA_INFO = 382 /* 0x17e */, |
| 435 |
HAL_PDG_SW_MODE_BW_START = 383 /* 0x17f */, |
| 436 |
HAL_PDG_SW_MODE_BW_END = 384 /* 0x180 */, |
| 437 |
HAL_PDG_WAIT_FOR_MAC_REQUEST = 385 /* 0x181 */, |
| 438 |
HAL_PDG_WAIT_FOR_PHY_REQUEST = 386 /* 0x182 */, |
| 439 |
HAL_SCHEDULER_END = 387 /* 0x183 */, |
| 440 |
HAL_PEER_TABLE_ENTRY = 388 /* 0x184 */, |
| 441 |
HAL_SW_PEER_INFO = 389 /* 0x185 */, |
| 442 |
HAL_RXOLE_CCE_CLASSIFY_INFO = 390 /* 0x186 */, |
| 443 |
HAL_TCL_CCE_CLASSIFY_INFO = 391 /* 0x187 */, |
| 444 |
HAL_RXOLE_CCE_INFO = 392 /* 0x188 */, |
| 445 |
HAL_TCL_CCE_INFO = 393 /* 0x189 */, |
| 446 |
HAL_TCL_CCE_SUPERRULE = 394 /* 0x18a */, |
| 447 |
HAL_CCE_RULE = 395 /* 0x18b */, |
| 448 |
HAL_RX_PPDU_START_DROPPED = 396 /* 0x18c */, |
| 449 |
HAL_RX_PPDU_END_DROPPED = 397 /* 0x18d */, |
| 450 |
HAL_RX_PPDU_END_STATUS_DONE_DROPPED = 398 /* 0x18e */, |
| 451 |
HAL_RX_MPDU_START_DROPPED = 399 /* 0x18f */, |
| 452 |
HAL_RX_MSDU_START_DROPPED = 400 /* 0x190 */, |
| 453 |
HAL_RX_MSDU_END_DROPPED = 401 /* 0x191 */, |
| 454 |
HAL_RX_MPDU_END_DROPPED = 402 /* 0x192 */, |
| 455 |
HAL_RX_ATTENTION_DROPPED = 403 /* 0x193 */, |
| 456 |
HAL_TXPCU_USER_SETUP = 404 /* 0x194 */, |
| 457 |
HAL_RXPCU_USER_SETUP_EXT = 405 /* 0x195 */, |
| 458 |
HAL_CE_SRC_DESC = 406 /* 0x196 */, |
| 459 |
HAL_CE_STAT_DESC = 407 /* 0x197 */, |
| 460 |
HAL_RXOLE_CCE_SUPERRULE = 408 /* 0x198 */, |
| 461 |
HAL_TX_RATE_STATS_INFO = 409 /* 0x199 */, |
| 462 |
HAL_CMD_PART_0_END = 410 /* 0x19a */, |
| 463 |
HAL_MACTX_SYNTH_ON = 411 /* 0x19b */, |
| 464 |
HAL_SCH_CRITICAL_TLV_REFERENCE = 412 /* 0x19c */, |
| 465 |
HAL_TQM_MPDU_GLOBAL_START = 413 /* 0x19d */, |
| 466 |
HAL_EXAMPLE_TLV_32 = 414 /* 0x19e */, |
| 467 |
HAL_TQM_UPDATE_TX_MSDU_FLOW = 415 /* 0x19f */, |
| 468 |
HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD = 416 /* 0x1a0 */, |
| 469 |
HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS = 417 /* 0x1a1 */, |
| 470 |
HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 418 /* 0x1a2 */, |
| 471 |
HAL_REO_UPDATE_RX_REO_QUEUE = 419 /* 0x1a3 */, |
| 472 |
HAL_CE_DST_DESC = 420 /* 0x1a4 */, |
| 473 |
HAL_TLV_BASE = 511 /* 0x1ff */, |
| 474 |
}; |
| 475 |
|
| 476 |
#define HAL_TLV_HDR_TAG GENMASK(9, 1) |
| 477 |
#define HAL_TLV_HDR_LEN GENMASK(25, 10) |
| 478 |
#define HAL_TLV_USR_ID GENMASK(31, 26) |
| 479 |
|
| 480 |
#define HAL_TLV_ALIGN 4 |
| 481 |
|
| 482 |
struct hal_tlv_hdr { |
| 483 |
u32 tl; |
| 484 |
u8 value[]; |
| 485 |
} __packed; |
| 486 |
|
| 487 |
#define RX_MPDU_DESC_INFO0_MSDU_COUNT GENMASK(7, 0) |
| 488 |
#define RX_MPDU_DESC_INFO0_SEQ_NUM GENMASK(19, 8) |
| 489 |
#define RX_MPDU_DESC_INFO0_FRAG_FLAG BIT(20) |
| 490 |
#define RX_MPDU_DESC_INFO0_MPDU_RETRY BIT(21) |
| 491 |
#define RX_MPDU_DESC_INFO0_AMPDU_FLAG BIT(22) |
| 492 |
#define RX_MPDU_DESC_INFO0_BAR_FRAME BIT(23) |
| 493 |
#define RX_MPDU_DESC_INFO0_VALID_PN BIT(24) |
| 494 |
#define RX_MPDU_DESC_INFO0_VALID_SA BIT(25) |
| 495 |
#define RX_MPDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(26) |
| 496 |
#define RX_MPDU_DESC_INFO0_VALID_DA BIT(27) |
| 497 |
#define RX_MPDU_DESC_INFO0_DA_MCBC BIT(28) |
| 498 |
#define RX_MPDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(29) |
| 499 |
#define RX_MPDU_DESC_INFO0_RAW_MPDU BIT(30) |
| 500 |
|
| 501 |
#define RX_MPDU_DESC_META_DATA_PEER_ID GENMASK(15, 0) |
| 502 |
|
| 503 |
struct rx_mpdu_desc { |
| 504 |
u32 info0; /* %RX_MPDU_DESC_INFO */ |
| 505 |
u32 meta_data; |
| 506 |
} __packed; |
| 507 |
|
| 508 |
/* rx_mpdu_desc |
| 509 |
* Producer: RXDMA |
| 510 |
* Consumer: REO/SW/FW |
| 511 |
* |
| 512 |
* msdu_count |
| 513 |
* The number of MSDUs within the MPDU |
| 514 |
* |
| 515 |
* mpdu_sequence_number |
| 516 |
* The field can have two different meanings based on the setting |
| 517 |
* of field 'bar_frame'. If 'bar_frame' is set, it means the MPDU |
| 518 |
* start sequence number from the BAR frame otherwise it means |
| 519 |
* the MPDU sequence number of the received frame. |
| 520 |
* |
| 521 |
* fragment_flag |
| 522 |
* When set, this MPDU is a fragment and REO should forward this |
| 523 |
* fragment MPDU to the REO destination ring without any reorder |
| 524 |
* checks, pn checks or bitmap update. This implies that REO is |
| 525 |
* forwarding the pointer to the MSDU link descriptor. |
| 526 |
* |
| 527 |
* mpdu_retry_bit |
| 528 |
* The retry bit setting from the MPDU header of the received frame |
| 529 |
* |
| 530 |
* ampdu_flag |
| 531 |
* Indicates the MPDU was received as part of an A-MPDU. |
| 532 |
* |
| 533 |
* bar_frame |
| 534 |
* Indicates the received frame is a BAR frame. After processing, |
| 535 |
* this frame shall be pushed to SW or deleted. |
| 536 |
* |
| 537 |
* valid_pn |
| 538 |
* When not set, REO will not perform a PN sequence number check. |
| 539 |
* |
| 540 |
* valid_sa |
| 541 |
* Indicates OLE found a valid SA entry for all MSDUs in this MPDU. |
| 542 |
* |
| 543 |
* sa_idx_timeout |
| 544 |
* Indicates, at least 1 MSDU within the MPDU has an unsuccessful |
| 545 |
* MAC source address search due to the expiration of search timer. |
| 546 |
* |
| 547 |
* valid_da |
| 548 |
* When set, OLE found a valid DA entry for all MSDUs in this MPDU. |
| 549 |
* |
| 550 |
* da_mcbc |
| 551 |
* Field Only valid if valid_da is set. Indicates at least one of |
| 552 |
* the DA addresses is a Multicast or Broadcast address. |
| 553 |
* |
| 554 |
* da_idx_timeout |
| 555 |
* Indicates, at least 1 MSDU within the MPDU has an unsuccessful |
| 556 |
* MAC destination address search due to the expiration of search |
| 557 |
* timer. |
| 558 |
* |
| 559 |
* raw_mpdu |
| 560 |
* Field only valid when first_msdu_in_mpdu_flag is set. Indicates |
| 561 |
* the contents in the MSDU buffer contains a 'RAW' MPDU. |
| 562 |
*/ |
| 563 |
|
| 564 |
enum hal_rx_msdu_desc_reo_dest_ind { |
| 565 |
HAL_RX_MSDU_DESC_REO_DEST_IND_TCL, |
| 566 |
HAL_RX_MSDU_DESC_REO_DEST_IND_SW1, |
| 567 |
HAL_RX_MSDU_DESC_REO_DEST_IND_SW2, |
| 568 |
HAL_RX_MSDU_DESC_REO_DEST_IND_SW3, |
| 569 |
HAL_RX_MSDU_DESC_REO_DEST_IND_SW4, |
| 570 |
HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE, |
| 571 |
HAL_RX_MSDU_DESC_REO_DEST_IND_FW, |
| 572 |
}; |
| 573 |
|
| 574 |
#define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU BIT(0) |
| 575 |
#define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU BIT(1) |
| 576 |
#define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION BIT(2) |
| 577 |
#define RX_MSDU_DESC_INFO0_MSDU_LENGTH GENMASK(16, 3) |
| 578 |
#define RX_MSDU_DESC_INFO0_REO_DEST_IND GENMASK(21, 17) |
| 579 |
#define RX_MSDU_DESC_INFO0_MSDU_DROP BIT(22) |
| 580 |
#define RX_MSDU_DESC_INFO0_VALID_SA BIT(23) |
| 581 |
#define RX_MSDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(24) |
| 582 |
#define RX_MSDU_DESC_INFO0_VALID_DA BIT(25) |
| 583 |
#define RX_MSDU_DESC_INFO0_DA_MCBC BIT(26) |
| 584 |
#define RX_MSDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(27) |
| 585 |
|
| 586 |
#define HAL_RX_MSDU_PKT_LENGTH_GET(val) \ |
| 587 |
(FIELD_GET(RX_MSDU_DESC_INFO0_MSDU_LENGTH, (val))) |
| 588 |
|
| 589 |
struct rx_msdu_desc { |
| 590 |
u32 info0; |
| 591 |
u32 rsvd0; |
| 592 |
} __packed; |
| 593 |
|
| 594 |
/* rx_msdu_desc |
| 595 |
* |
| 596 |
* first_msdu_in_mpdu |
| 597 |
* Indicates first msdu in mpdu. |
| 598 |
* |
| 599 |
* last_msdu_in_mpdu |
| 600 |
* Indicates last msdu in mpdu. This flag can be true only when |
| 601 |
* 'Msdu_continuation' set to 0. This implies that when an msdu |
| 602 |
* is spread out over multiple buffers and thus msdu_continuation |
| 603 |
* is set, only for the very last buffer of the msdu, can the |
| 604 |
* 'last_msdu_in_mpdu' be set. |
| 605 |
* |
| 606 |
* When both first_msdu_in_mpdu and last_msdu_in_mpdu are set, |
| 607 |
* the MPDU that this MSDU belongs to only contains a single MSDU. |
| 608 |
* |
| 609 |
* msdu_continuation |
| 610 |
* When set, this MSDU buffer was not able to hold the entire MSDU. |
| 611 |
* The next buffer will therefore contain additional information |
| 612 |
* related to this MSDU. |
| 613 |
* |
| 614 |
* msdu_length |
| 615 |
* Field is only valid in combination with the 'first_msdu_in_mpdu' |
| 616 |
* being set. Full MSDU length in bytes after decapsulation. This |
| 617 |
* field is still valid for MPDU frames without A-MSDU. It still |
| 618 |
* represents MSDU length after decapsulation Or in case of RAW |
| 619 |
* MPDUs, it indicates the length of the entire MPDU (without FCS |
| 620 |
* field). |
| 621 |
* |
| 622 |
* reo_destination_indication |
| 623 |
* The id of the reo exit ring where the msdu frame shall push |
| 624 |
* after (MPDU level) reordering has finished. Values are defined |
| 625 |
* in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. |
| 626 |
* |
| 627 |
* msdu_drop |
| 628 |
* Indicates that REO shall drop this MSDU and not forward it to |
| 629 |
* any other ring. |
| 630 |
* |
| 631 |
* valid_sa |
| 632 |
* Indicates OLE found a valid SA entry for this MSDU. |
| 633 |
* |
| 634 |
* sa_idx_timeout |
| 635 |
* Indicates, an unsuccessful MAC source address search due to |
| 636 |
* the expiration of search timer for this MSDU. |
| 637 |
* |
| 638 |
* valid_da |
| 639 |
* When set, OLE found a valid DA entry for this MSDU. |
| 640 |
* |
| 641 |
* da_mcbc |
| 642 |
* Field Only valid if valid_da is set. Indicates the DA address |
| 643 |
* is a Multicast or Broadcast address for this MSDU. |
| 644 |
* |
| 645 |
* da_idx_timeout |
| 646 |
* Indicates, an unsuccessful MAC destination address search due |
| 647 |
* to the expiration of search timer for this MSDU. |
| 648 |
*/ |
| 649 |
|
| 650 |
enum hal_reo_dest_ring_buffer_type { |
| 651 |
HAL_REO_DEST_RING_BUFFER_TYPE_MSDU, |
| 652 |
HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC, |
| 653 |
}; |
| 654 |
|
| 655 |
enum hal_reo_dest_ring_push_reason { |
| 656 |
HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED, |
| 657 |
HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION, |
| 658 |
}; |
| 659 |
|
| 660 |
enum hal_reo_dest_ring_error_code { |
| 661 |
HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO, |
| 662 |
HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID, |
| 663 |
HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA, |
| 664 |
HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE, |
| 665 |
HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE, |
| 666 |
HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP, |
| 667 |
HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP, |
| 668 |
HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR, |
| 669 |
HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR, |
| 670 |
HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION, |
| 671 |
HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN, |
| 672 |
HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED, |
| 673 |
HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET, |
| 674 |
HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET, |
| 675 |
HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED, |
| 676 |
HAL_REO_DEST_RING_ERROR_CODE_MAX, |
| 677 |
}; |
| 678 |
|
| 679 |
#define HAL_REO_DEST_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) |
| 680 |
#define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE BIT(8) |
| 681 |
#define HAL_REO_DEST_RING_INFO0_PUSH_REASON GENMASK(10, 9) |
| 682 |
#define HAL_REO_DEST_RING_INFO0_ERROR_CODE GENMASK(15, 11) |
| 683 |
#define HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM GENMASK(31, 16) |
| 684 |
|
| 685 |
#define HAL_REO_DEST_RING_INFO1_REORDER_INFO_VALID BIT(0) |
| 686 |
#define HAL_REO_DEST_RING_INFO1_REORDER_OPCODE GENMASK(4, 1) |
| 687 |
#define HAL_REO_DEST_RING_INFO1_REORDER_SLOT_IDX GENMASK(12, 5) |
| 688 |
|
| 689 |
#define HAL_REO_DEST_RING_INFO2_RING_ID GENMASK(27, 20) |
| 690 |
#define HAL_REO_DEST_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) |
| 691 |
|
| 692 |
struct hal_reo_dest_ring { |
| 693 |
struct ath11k_buffer_addr buf_addr_info; |
| 694 |
struct rx_mpdu_desc rx_mpdu_info; |
| 695 |
struct rx_msdu_desc rx_msdu_info; |
| 696 |
u32 queue_addr_lo; |
| 697 |
u32 info0; /* %HAL_REO_DEST_RING_INFO0_ */ |
| 698 |
u32 info1; /* %HAL_REO_DEST_RING_INFO1_ */ |
| 699 |
u32 rsvd0; |
| 700 |
u32 rsvd1; |
| 701 |
u32 rsvd2; |
| 702 |
u32 rsvd3; |
| 703 |
u32 rsvd4; |
| 704 |
u32 rsvd5; |
| 705 |
u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ |
| 706 |
} __packed; |
| 707 |
|
| 708 |
/* hal_reo_dest_ring |
| 709 |
* |
| 710 |
* Producer: RXDMA |
| 711 |
* Consumer: REO/SW/FW |
| 712 |
* |
| 713 |
* buf_addr_info |
| 714 |
* Details of the physical address of a buffer or MSDU |
| 715 |
* link descriptor. |
| 716 |
* |
| 717 |
* rx_mpdu_info |
| 718 |
* General information related to the MPDU that is passed |
| 719 |
* on from REO entrance ring to the REO destination ring. |
| 720 |
* |
| 721 |
* rx_msdu_info |
| 722 |
* General information related to the MSDU that is passed |
| 723 |
* on from RXDMA all the way to the REO destination ring. |
| 724 |
* |
| 725 |
* queue_addr_lo |
| 726 |
* Address (lower 32 bits) of the REO queue descriptor. |
| 727 |
* |
| 728 |
* queue_addr_hi |
| 729 |
* Address (upper 8 bits) of the REO queue descriptor. |
| 730 |
* |
| 731 |
* buffer_type |
| 732 |
* Indicates the type of address provided in the buf_addr_info. |
| 733 |
* Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. |
| 734 |
* |
| 735 |
* push_reason |
| 736 |
* Reason for pushing this frame to this exit ring. Values are |
| 737 |
* defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. |
| 738 |
* |
| 739 |
* error_code |
| 740 |
* Valid only when 'push_reason' is set. All error codes are |
| 741 |
* defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. |
| 742 |
* |
| 743 |
* rx_queue_num |
| 744 |
* Indicates the REO MPDU reorder queue id from which this frame |
| 745 |
* originated. |
| 746 |
* |
| 747 |
* reorder_info_valid |
| 748 |
* When set, REO has been instructed to not perform the actual |
| 749 |
* re-ordering of frames for this queue, but just to insert |
| 750 |
* the reorder opcodes. |
| 751 |
* |
| 752 |
* reorder_opcode |
| 753 |
* Field is valid when 'reorder_info_valid' is set. This field is |
| 754 |
* always valid for debug purpose as well. |
| 755 |
* |
| 756 |
* reorder_slot_idx |
| 757 |
* Valid only when 'reorder_info_valid' is set. |
| 758 |
* |
| 759 |
* ring_id |
| 760 |
* The buffer pointer ring id. |
| 761 |
* 0 - Idle ring |
| 762 |
* 1 - N refers to other rings. |
| 763 |
* |
| 764 |
* looping_count |
| 765 |
* Indicates the number of times the producer of entries into |
| 766 |
* this ring has looped around the ring. |
| 767 |
*/ |
| 768 |
|
| 769 |
enum hal_reo_entr_rxdma_ecode { |
| 770 |
HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR, |
| 771 |
HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR, |
| 772 |
HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR, |
| 773 |
HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR, |
| 774 |
HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR, |
| 775 |
HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR, |
| 776 |
HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR, |
| 777 |
HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR, |
| 778 |
HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR, |
| 779 |
HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR, |
| 780 |
HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR, |
| 781 |
HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR, |
| 782 |
HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR, |
| 783 |
HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR, |
| 784 |
HAL_REO_ENTR_RING_RXDMA_ECODE_MAX, |
| 785 |
}; |
| 786 |
|
| 787 |
#define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) |
| 788 |
#define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT GENMASK(21, 8) |
| 789 |
#define HAL_REO_ENTR_RING_INFO0_DEST_IND GENMASK(26, 22) |
| 790 |
#define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR BIT(27) |
| 791 |
|
| 792 |
#define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON GENMASK(1, 0) |
| 793 |
#define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE GENMASK(6, 2) |
| 794 |
|
| 795 |
struct hal_reo_entrance_ring { |
| 796 |
struct ath11k_buffer_addr buf_addr_info; |
| 797 |
struct rx_mpdu_desc rx_mpdu_info; |
| 798 |
u32 queue_addr_lo; |
| 799 |
u32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */ |
| 800 |
u32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */ |
| 801 |
u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ |
| 802 |
|
| 803 |
} __packed; |
| 804 |
|
| 805 |
/* hal_reo_entrance_ring |
| 806 |
* |
| 807 |
* Producer: RXDMA |
| 808 |
* Consumer: REO |
| 809 |
* |
| 810 |
* buf_addr_info |
| 811 |
* Details of the physical address of a buffer or MSDU |
| 812 |
* link descriptor. |
| 813 |
* |
| 814 |
* rx_mpdu_info |
| 815 |
* General information related to the MPDU that is passed |
| 816 |
* on from REO entrance ring to the REO destination ring. |
| 817 |
* |
| 818 |
* queue_addr_lo |
| 819 |
* Address (lower 32 bits) of the REO queue descriptor. |
| 820 |
* |
| 821 |
* queue_addr_hi |
| 822 |
* Address (upper 8 bits) of the REO queue descriptor. |
| 823 |
* |
| 824 |
* mpdu_byte_count |
| 825 |
* An approximation of the number of bytes received in this MPDU. |
| 826 |
* Used to keeps stats on the amount of data flowing |
| 827 |
* through a queue. |
| 828 |
* |
| 829 |
* reo_destination_indication |
| 830 |
* The id of the reo exit ring where the msdu frame shall push |
| 831 |
* after (MPDU level) reordering has finished. Values are defined |
| 832 |
* in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. |
| 833 |
* |
| 834 |
* frameless_bar |
| 835 |
* Indicates that this REO entrance ring struct contains BAR info |
| 836 |
* from a multi TID BAR frame. The original multi TID BAR frame |
| 837 |
* itself contained all the REO info for the first TID, but all |
| 838 |
* the subsequent TID info and their linkage to the REO descriptors |
| 839 |
* is passed down as 'frameless' BAR info. |
| 840 |
* |
| 841 |
* The only fields valid in this descriptor when this bit is set |
| 842 |
* are queue_addr_lo, queue_addr_hi, mpdu_sequence_number, |
| 843 |
* bar_frame and peer_meta_data. |
| 844 |
* |
| 845 |
* rxdma_push_reason |
| 846 |
* Reason for pushing this frame to this exit ring. Values are |
| 847 |
* defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. |
| 848 |
* |
| 849 |
* rxdma_error_code |
| 850 |
* Valid only when 'push_reason' is set. All error codes are |
| 851 |
* defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. |
| 852 |
* |
| 853 |
* ring_id |
| 854 |
* The buffer pointer ring id. |
| 855 |
* 0 - Idle ring |
| 856 |
* 1 - N refers to other rings. |
| 857 |
* |
| 858 |
* looping_count |
| 859 |
* Indicates the number of times the producer of entries into |
| 860 |
* this ring has looped around the ring. |
| 861 |
*/ |
| 862 |
|
| 863 |
#define HAL_SW_MON_RING_INFO0_RXDMA_PUSH_REASON GENMASK(1, 0) |
| 864 |
#define HAL_SW_MON_RING_INFO0_RXDMA_ERROR_CODE GENMASK(6, 2) |
| 865 |
#define HAL_SW_MON_RING_INFO0_MPDU_FRAG_NUMBER GENMASK(10, 7) |
| 866 |
#define HAL_SW_MON_RING_INFO0_FRAMELESS_BAR BIT(11) |
| 867 |
#define HAL_SW_MON_RING_INFO0_STATUS_BUF_CNT GENMASK(15, 12) |
| 868 |
#define HAL_SW_MON_RING_INFO0_END_OF_PPDU BIT(16) |
| 869 |
|
| 870 |
#define HAL_SW_MON_RING_INFO1_PHY_PPDU_ID GENMASK(15, 0) |
| 871 |
#define HAL_SW_MON_RING_INFO1_RING_ID GENMASK(27, 20) |
| 872 |
#define HAL_SW_MON_RING_INFO1_LOOPING_COUNT GENMASK(31, 28) |
| 873 |
|
| 874 |
struct hal_sw_monitor_ring { |
| 875 |
struct ath11k_buffer_addr buf_addr_info; |
| 876 |
struct rx_mpdu_desc rx_mpdu_info; |
| 877 |
struct ath11k_buffer_addr status_buf_addr_info; |
| 878 |
u32 info0; |
| 879 |
u32 info1; |
| 880 |
} __packed; |
| 881 |
|
| 882 |
#define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER GENMASK(15, 0) |
| 883 |
#define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED BIT(16) |
| 884 |
|
| 885 |
struct hal_reo_cmd_hdr { |
| 886 |
u32 info0; |
| 887 |
} __packed; |
| 888 |
|
| 889 |
#define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) |
| 890 |
#define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS BIT(8) |
| 891 |
|
| 892 |
struct hal_reo_get_queue_stats { |
| 893 |
struct hal_reo_cmd_hdr cmd; |
| 894 |
u32 queue_addr_lo; |
| 895 |
u32 info0; |
| 896 |
u32 rsvd0[6]; |
| 897 |
} __packed; |
| 898 |
|
| 899 |
/* hal_reo_get_queue_stats |
| 900 |
* Producer: SW |
| 901 |
* Consumer: REO |
| 902 |
* |
| 903 |
* cmd |
| 904 |
* Details for command execution tracking purposes. |
| 905 |
* |
| 906 |
* queue_addr_lo |
| 907 |
* Address (lower 32 bits) of the REO queue descriptor. |
| 908 |
* |
| 909 |
* queue_addr_hi |
| 910 |
* Address (upper 8 bits) of the REO queue descriptor. |
| 911 |
* |
| 912 |
* clear_stats |
| 913 |
* Clear stats settings. When set, Clear the stats after |
| 914 |
* generating the status. |
| 915 |
* |
| 916 |
* Following stats will be cleared. |
| 917 |
* Timeout_count |
| 918 |
* Forward_due_to_bar_count |
| 919 |
* Duplicate_count |
| 920 |
* Frames_in_order_count |
| 921 |
* BAR_received_count |
| 922 |
* MPDU_Frames_processed_count |
| 923 |
* MSDU_Frames_processed_count |
| 924 |
* Total_processed_byte_count |
| 925 |
* Late_receive_MPDU_count |
| 926 |
* window_jump_2k |
| 927 |
* Hole_count |
| 928 |
*/ |
| 929 |
|
| 930 |
#define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI GENMASK(7, 0) |
| 931 |
#define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR BIT(8) |
| 932 |
#define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX GENMASK(10, 9) |
| 933 |
|
| 934 |
struct hal_reo_flush_queue { |
| 935 |
struct hal_reo_cmd_hdr cmd; |
| 936 |
u32 desc_addr_lo; |
| 937 |
u32 info0; |
| 938 |
u32 rsvd0[6]; |
| 939 |
} __packed; |
| 940 |
|
| 941 |
#define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI GENMASK(7, 0) |
| 942 |
#define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS BIT(8) |
| 943 |
#define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX BIT(9) |
| 944 |
#define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX GENMASK(11, 10) |
| 945 |
#define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE BIT(12) |
| 946 |
#define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE BIT(13) |
| 947 |
#define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL BIT(14) |
| 948 |
|
| 949 |
struct hal_reo_flush_cache { |
| 950 |
struct hal_reo_cmd_hdr cmd; |
| 951 |
u32 cache_addr_lo; |
| 952 |
u32 info0; |
| 953 |
u32 rsvd0[6]; |
| 954 |
} __packed; |
| 955 |
|
| 956 |
#define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE BIT(0) |
| 957 |
#define HAL_TCL_DATA_CMD_INFO0_EPD BIT(1) |
| 958 |
#define HAL_TCL_DATA_CMD_INFO0_ENCAP_TYPE GENMASK(3, 2) |
| 959 |
#define HAL_TCL_DATA_CMD_INFO0_ENCRYPT_TYPE GENMASK(7, 4) |
| 960 |
#define HAL_TCL_DATA_CMD_INFO0_SRC_BUF_SWAP BIT(8) |
| 961 |
#define HAL_TCL_DATA_CMD_INFO0_LNK_META_SWAP BIT(9) |
| 962 |
#define HAL_TCL_DATA_CMD_INFO0_SEARCH_TYPE GENMASK(13, 12) |
| 963 |
#define HAL_TCL_DATA_CMD_INFO0_ADDR_EN GENMASK(15, 14) |
| 964 |
#define HAL_TCL_DATA_CMD_INFO0_CMD_NUM GENMASK(31, 16) |
| 965 |
|
| 966 |
#define HAL_TCL_DATA_CMD_INFO1_DATA_LEN GENMASK(15, 0) |
| 967 |
#define HAL_TCL_DATA_CMD_INFO1_IP4_CKSUM_EN BIT(16) |
| 968 |
#define HAL_TCL_DATA_CMD_INFO1_UDP4_CKSUM_EN BIT(17) |
| 969 |
#define HAL_TCL_DATA_CMD_INFO1_UDP6_CKSUM_EN BIT(18) |
| 970 |
#define HAL_TCL_DATA_CMD_INFO1_TCP4_CKSUM_EN BIT(19) |
| 971 |
#define HAL_TCL_DATA_CMD_INFO1_TCP6_CKSUM_EN BIT(20) |
| 972 |
#define HAL_TCL_DATA_CMD_INFO1_TO_FW BIT(21) |
| 973 |
#define HAL_TCL_DATA_CMD_INFO1_PKT_OFFSET GENMASK(31, 23) |
| 974 |
|
| 975 |
#define HAL_TCL_DATA_CMD_INFO2_BUF_TIMESTAMP GENMASK(18, 0) |
| 976 |
#define HAL_TCL_DATA_CMD_INFO2_BUF_T_VALID BIT(19) |
| 977 |
#define HAL_IPQ8074_TCL_DATA_CMD_INFO2_MESH_ENABLE BIT(20) |
| 978 |
#define HAL_TCL_DATA_CMD_INFO2_TID_OVERWRITE BIT(21) |
| 979 |
#define HAL_TCL_DATA_CMD_INFO2_TID GENMASK(25, 22) |
| 980 |
#define HAL_TCL_DATA_CMD_INFO2_LMAC_ID GENMASK(27, 26) |
| 981 |
|
| 982 |
#define HAL_TCL_DATA_CMD_INFO3_DSCP_TID_TABLE_IDX GENMASK(5, 0) |
| 983 |
#define HAL_TCL_DATA_CMD_INFO3_SEARCH_INDEX GENMASK(25, 6) |
| 984 |
#define HAL_TCL_DATA_CMD_INFO3_CACHE_SET_NUM GENMASK(29, 26) |
| 985 |
#define HAL_QCN9074_TCL_DATA_CMD_INFO3_MESH_ENABLE GENMASK(31, 30) |
| 986 |
|
| 987 |
#define HAL_TCL_DATA_CMD_INFO4_RING_ID GENMASK(27, 20) |
| 988 |
#define HAL_TCL_DATA_CMD_INFO4_LOOPING_COUNT GENMASK(31, 28) |
| 989 |
|
| 990 |
enum hal_encrypt_type { |
| 991 |
HAL_ENCRYPT_TYPE_WEP_40, |
| 992 |
HAL_ENCRYPT_TYPE_WEP_104, |
| 993 |
HAL_ENCRYPT_TYPE_TKIP_NO_MIC, |
| 994 |
HAL_ENCRYPT_TYPE_WEP_128, |
| 995 |
HAL_ENCRYPT_TYPE_TKIP_MIC, |
| 996 |
HAL_ENCRYPT_TYPE_WAPI, |
| 997 |
HAL_ENCRYPT_TYPE_CCMP_128, |
| 998 |
HAL_ENCRYPT_TYPE_OPEN, |
| 999 |
HAL_ENCRYPT_TYPE_CCMP_256, |
| 1000 |
HAL_ENCRYPT_TYPE_GCMP_128, |
| 1001 |
HAL_ENCRYPT_TYPE_AES_GCMP_256, |
| 1002 |
HAL_ENCRYPT_TYPE_WAPI_GCM_SM4, |
| 1003 |
}; |
| 1004 |
|
| 1005 |
enum hal_tcl_encap_type { |
| 1006 |
HAL_TCL_ENCAP_TYPE_RAW, |
| 1007 |
HAL_TCL_ENCAP_TYPE_NATIVE_WIFI, |
| 1008 |
HAL_TCL_ENCAP_TYPE_ETHERNET, |
| 1009 |
HAL_TCL_ENCAP_TYPE_802_3 = 3, |
| 1010 |
}; |
| 1011 |
|
| 1012 |
enum hal_tcl_desc_type { |
| 1013 |
HAL_TCL_DESC_TYPE_BUFFER, |
| 1014 |
HAL_TCL_DESC_TYPE_EXT_DESC, |
| 1015 |
}; |
| 1016 |
|
| 1017 |
enum hal_wbm_htt_tx_comp_status { |
| 1018 |
HAL_WBM_REL_HTT_TX_COMP_STATUS_OK, |
| 1019 |
HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP, |
| 1020 |
HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL, |
| 1021 |
HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ, |
| 1022 |
HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT, |
| 1023 |
HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY, |
| 1024 |
}; |
| 1025 |
|
| 1026 |
struct hal_tcl_data_cmd { |
| 1027 |
struct ath11k_buffer_addr buf_addr_info; |
| 1028 |
u32 info0; |
| 1029 |
u32 info1; |
| 1030 |
u32 info2; |
| 1031 |
u32 info3; |
| 1032 |
u32 info4; |
| 1033 |
} __packed; |
| 1034 |
|
| 1035 |
/* hal_tcl_data_cmd |
| 1036 |
* |
| 1037 |
* buf_addr_info |
| 1038 |
* Details of the physical address of a buffer or MSDU |
| 1039 |
* link descriptor. |
| 1040 |
* |
| 1041 |
* desc_type |
| 1042 |
* Indicates the type of address provided in the buf_addr_info. |
| 1043 |
* Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. |
| 1044 |
* |
| 1045 |
* epd |
| 1046 |
* When this bit is set then input packet is an EPD type. |
| 1047 |
* |
| 1048 |
* encap_type |
| 1049 |
* Indicates the encapsulation that HW will perform. Values are |
| 1050 |
* defined in enum %HAL_TCL_ENCAP_TYPE_. |
| 1051 |
* |
| 1052 |
* encrypt_type |
| 1053 |
* Field only valid for encap_type: RAW |
| 1054 |
* Values are defined in enum %HAL_ENCRYPT_TYPE_. |
| 1055 |
* |
| 1056 |
* src_buffer_swap |
| 1057 |
* Treats source memory (packet buffer) organization as big-endian. |
| 1058 |
* 1'b0: Source memory is little endian |
| 1059 |
* 1'b1: Source memory is big endian |
| 1060 |
* |
| 1061 |
* link_meta_swap |
| 1062 |
* Treats link descriptor and Metadata as big-endian. |
| 1063 |
* 1'b0: memory is little endian |
| 1064 |
* 1'b1: memory is big endian |
| 1065 |
* |
| 1066 |
* search_type |
| 1067 |
* Search type select |
| 1068 |
* 0 - Normal search, 1 - Index based address search, |
| 1069 |
* 2 - Index based flow search |
| 1070 |
* |
| 1071 |
* addrx_en |
| 1072 |
* addry_en |
| 1073 |
* Address X/Y search enable in ASE correspondingly. |
| 1074 |
* 1'b0: Search disable |
| 1075 |
* 1'b1: Search Enable |
| 1076 |
* |
| 1077 |
* cmd_num |
| 1078 |
* This number can be used to match against status. |
| 1079 |
* |
| 1080 |
* data_length |
| 1081 |
* MSDU length in case of direct descriptor. Length of link |
| 1082 |
* extension descriptor in case of Link extension descriptor. |
| 1083 |
* |
| 1084 |
* *_checksum_en |
| 1085 |
* Enable checksum replacement for ipv4, udp_over_ipv4, ipv6, |
| 1086 |
* udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6. |
| 1087 |
* |
| 1088 |
* to_fw |
| 1089 |
* Forward packet to FW along with classification result. The |
| 1090 |
* packet will not be forward to TQM when this bit is set. |
| 1091 |
* 1'b0: Use classification result to forward the packet. |
| 1092 |
* 1'b1: Override classification result & forward packet only to fw |
| 1093 |
* |
| 1094 |
* packet_offset |
| 1095 |
* Packet offset from Metadata in case of direct buffer descriptor. |
| 1096 |
* |
| 1097 |
* buffer_timestamp |
| 1098 |
* buffer_timestamp_valid |
| 1099 |
* Frame system entrance timestamp. It shall be filled by first |
| 1100 |
* module (SW, TCL or TQM) that sees the frames first. |
| 1101 |
* |
| 1102 |
* mesh_enable |
| 1103 |
* For raw WiFi frames, this indicates transmission to a mesh STA, |
| 1104 |
* enabling the interpretation of the 'Mesh Control Present' bit |
| 1105 |
* (bit 8) of QoS Control. |
| 1106 |
* For native WiFi frames, this indicates that a 'Mesh Control' |
| 1107 |
* field is present between the header and the LLC. |
| 1108 |
* |
| 1109 |
* hlos_tid_overwrite |
| 1110 |
* |
| 1111 |
* When set, TCL shall ignore the IP DSCP and VLAN PCP |
| 1112 |
* fields and use HLOS_TID as the final TID. Otherwise TCL |
| 1113 |
* shall consider the DSCP and PCP fields as well as HLOS_TID |
| 1114 |
* and choose a final TID based on the configured priority |
| 1115 |
* |
| 1116 |
* hlos_tid |
| 1117 |
* HLOS MSDU priority |
| 1118 |
* Field is used when HLOS_TID_overwrite is set. |
| 1119 |
* |
| 1120 |
* lmac_id |
| 1121 |
* TCL uses this LMAC_ID in address search, i.e, while |
| 1122 |
* finding matching entry for the packet in AST corresponding |
| 1123 |
* to given LMAC_ID |
| 1124 |
* |
| 1125 |
* If LMAC ID is all 1s (=> value 3), it indicates wildcard |
| 1126 |
* match for any MAC |
| 1127 |
* |
| 1128 |
* dscp_tid_table_num |
| 1129 |
* DSCP to TID mapping table number that need to be used |
| 1130 |
* for the MSDU. |
| 1131 |
* |
| 1132 |
* search_index |
| 1133 |
* The index that will be used for index based address or |
| 1134 |
* flow search. The field is valid when 'search_type' is 1 or 2. |
| 1135 |
* |
| 1136 |
* cache_set_num |
| 1137 |
* |
| 1138 |
* Cache set number that should be used to cache the index |
| 1139 |
* based search results, for address and flow search. This |
| 1140 |
* value should be equal to LSB four bits of the hash value of |
| 1141 |
* match data, in case of search index points to an entry which |
| 1142 |
* may be used in content based search also. The value can be |
| 1143 |
* anything when the entry pointed by search index will not be |
| 1144 |
* used for content based search. |
| 1145 |
* |
| 1146 |
* ring_id |
| 1147 |
* The buffer pointer ring ID. |
| 1148 |
* 0 refers to the IDLE ring |
| 1149 |
* 1 - N refers to other rings |
| 1150 |
* |
| 1151 |
* looping_count |
| 1152 |
* |
| 1153 |
* A count value that indicates the number of times the |
| 1154 |
* producer of entries into the Ring has looped around the |
| 1155 |
* ring. |
| 1156 |
* |
| 1157 |
* At initialization time, this value is set to 0. On the |
| 1158 |
* first loop, this value is set to 1. After the max value is |
| 1159 |
* reached allowed by the number of bits for this field, the |
| 1160 |
* count value continues with 0 again. |
| 1161 |
* |
| 1162 |
* In case SW is the consumer of the ring entries, it can |
| 1163 |
* use this field to figure out up to where the producer of |
| 1164 |
* entries has created new entries. This eliminates the need to |
| 1165 |
* check where the head pointer' of the ring is located once |
| 1166 |
* the SW starts processing an interrupt indicating that new |
| 1167 |
* entries have been put into this ring... |
| 1168 |
* |
| 1169 |
* Also note that SW if it wants only needs to look at the |
| 1170 |
* LSB bit of this count value. |
| 1171 |
*/ |
| 1172 |
|
| 1173 |
#define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd) |
| 1174 |
|
| 1175 |
enum hal_tcl_gse_ctrl { |
| 1176 |
HAL_TCL_GSE_CTRL_RD_STAT, |
| 1177 |
HAL_TCL_GSE_CTRL_SRCH_DIS, |
| 1178 |
HAL_TCL_GSE_CTRL_WR_BK_SINGLE, |
| 1179 |
HAL_TCL_GSE_CTRL_WR_BK_ALL, |
| 1180 |
HAL_TCL_GSE_CTRL_INVAL_SINGLE, |
| 1181 |
HAL_TCL_GSE_CTRL_INVAL_ALL, |
| 1182 |
HAL_TCL_GSE_CTRL_WR_BK_INVAL_SINGLE, |
| 1183 |
HAL_TCL_GSE_CTRL_WR_BK_INVAL_ALL, |
| 1184 |
HAL_TCL_GSE_CTRL_CLR_STAT_SINGLE, |
| 1185 |
}; |
| 1186 |
|
| 1187 |
/* hal_tcl_gse_ctrl |
| 1188 |
* |
| 1189 |
* rd_stat |
| 1190 |
* Report or Read statistics |
| 1191 |
* srch_dis |
| 1192 |
* Search disable. Report only Hash. |
| 1193 |
* wr_bk_single |
| 1194 |
* Write Back single entry |
| 1195 |
* wr_bk_all |
| 1196 |
* Write Back entire cache entry |
| 1197 |
* inval_single |
| 1198 |
* Invalidate single cache entry |
| 1199 |
* inval_all |
| 1200 |
* Invalidate entire cache |
| 1201 |
* wr_bk_inval_single |
| 1202 |
* Write back and invalidate single entry in cache |
| 1203 |
* wr_bk_inval_all |
| 1204 |
* Write back and invalidate entire cache |
| 1205 |
* clr_stat_single |
| 1206 |
* Clear statistics for single entry |
| 1207 |
*/ |
| 1208 |
|
| 1209 |
#define HAL_TCL_GSE_CMD_INFO0_CTRL_BUF_ADDR_HI GENMASK(7, 0) |
| 1210 |
#define HAL_TCL_GSE_CMD_INFO0_GSE_CTRL GENMASK(11, 8) |
| 1211 |
#define HAL_TCL_GSE_CMD_INFO0_GSE_SEL BIT(12) |
| 1212 |
#define HAL_TCL_GSE_CMD_INFO0_STATUS_DEST_RING_ID BIT(13) |
| 1213 |
#define HAL_TCL_GSE_CMD_INFO0_SWAP BIT(14) |
| 1214 |
|
| 1215 |
#define HAL_TCL_GSE_CMD_INFO1_RING_ID GENMASK(27, 20) |
| 1216 |
#define HAL_TCL_GSE_CMD_INFO1_LOOPING_COUNT GENMASK(31, 28) |
| 1217 |
|
| 1218 |
struct hal_tcl_gse_cmd { |
| 1219 |
u32 ctrl_buf_addr_lo; |
| 1220 |
u32 info0; |
| 1221 |
u32 meta_data[2]; |
| 1222 |
u32 rsvd0[2]; |
| 1223 |
u32 info1; |
| 1224 |
} __packed; |
| 1225 |
|
| 1226 |
/* hal_tcl_gse_cmd |
| 1227 |
* |
| 1228 |
* ctrl_buf_addr_lo, ctrl_buf_addr_hi |
| 1229 |
* Address of a control buffer containing additional info needed |
| 1230 |
* for this command execution. |
| 1231 |
* |
| 1232 |
* gse_ctrl |
| 1233 |
* GSE control operations. This includes cache operations and table |
| 1234 |
* entry statistics read/clear operation. Values are defined in |
| 1235 |
* enum %HAL_TCL_GSE_CTRL. |
| 1236 |
* |
| 1237 |
* gse_sel |
| 1238 |
* To select the ASE/FSE to do the operation mention by GSE_ctrl. |
| 1239 |
* 0: FSE select 1: ASE select |
| 1240 |
* |
| 1241 |
* status_destination_ring_id |
| 1242 |
* TCL status ring to which the GSE status needs to be send. |
| 1243 |
* |
| 1244 |
* swap |
| 1245 |
* Bit to enable byte swapping of contents of buffer. |
| 1246 |
* |
| 1247 |
* meta_data |
| 1248 |
* Meta data to be returned in the status descriptor |
| 1249 |
*/ |
| 1250 |
|
| 1251 |
enum hal_tcl_cache_op_res { |
| 1252 |
HAL_TCL_CACHE_OP_RES_DONE, |
| 1253 |
HAL_TCL_CACHE_OP_RES_NOT_FOUND, |
| 1254 |
HAL_TCL_CACHE_OP_RES_TIMEOUT, |
| 1255 |
}; |
| 1256 |
|
| 1257 |
#define HAL_TCL_STATUS_RING_INFO0_GSE_CTRL GENMASK(3, 0) |
| 1258 |
#define HAL_TCL_STATUS_RING_INFO0_GSE_SEL BIT(4) |
| 1259 |
#define HAL_TCL_STATUS_RING_INFO0_CACHE_OP_RES GENMASK(6, 5) |
| 1260 |
#define HAL_TCL_STATUS_RING_INFO0_MSDU_CNT GENMASK(31, 8) |
| 1261 |
|
| 1262 |
#define HAL_TCL_STATUS_RING_INFO1_HASH_IDX GENMASK(19, 0) |
| 1263 |
|
| 1264 |
#define HAL_TCL_STATUS_RING_INFO2_RING_ID GENMASK(27, 20) |
| 1265 |
#define HAL_TCL_STATUS_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) |
| 1266 |
|
| 1267 |
struct hal_tcl_status_ring { |
| 1268 |
u32 info0; |
| 1269 |
u32 msdu_byte_count; |
| 1270 |
u32 msdu_timestamp; |
| 1271 |
u32 meta_data[2]; |
| 1272 |
u32 info1; |
| 1273 |
u32 rsvd0; |
| 1274 |
u32 info2; |
| 1275 |
} __packed; |
| 1276 |
|
| 1277 |
/* hal_tcl_status_ring |
| 1278 |
* |
| 1279 |
* gse_ctrl |
| 1280 |
* GSE control operations. This includes cache operations and table |
| 1281 |
* entry statistics read/clear operation. Values are defined in |
| 1282 |
* enum %HAL_TCL_GSE_CTRL. |
| 1283 |
* |
| 1284 |
* gse_sel |
| 1285 |
* To select the ASE/FSE to do the operation mention by GSE_ctrl. |
| 1286 |
* 0: FSE select 1: ASE select |
| 1287 |
* |
| 1288 |
* cache_op_res |
| 1289 |
* Cache operation result. Values are defined in enum |
| 1290 |
* %HAL_TCL_CACHE_OP_RES_. |
| 1291 |
* |
| 1292 |
* msdu_cnt |
| 1293 |
* msdu_byte_count |
| 1294 |
* MSDU count of Entry and MSDU byte count for entry 1. |
| 1295 |
* |
| 1296 |
* hash_indx |
| 1297 |
* Hash value of the entry in case of search failed or disabled. |
| 1298 |
*/ |
| 1299 |
|
| 1300 |
#define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) |
| 1301 |
#define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN BIT(8) |
| 1302 |
#define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP BIT(9) |
| 1303 |
#define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP BIT(10) |
| 1304 |
#define HAL_CE_SRC_DESC_ADDR_INFO_GATHER BIT(11) |
| 1305 |
#define HAL_CE_SRC_DESC_ADDR_INFO_LEN GENMASK(31, 16) |
| 1306 |
|
| 1307 |
#define HAL_CE_SRC_DESC_META_INFO_DATA GENMASK(15, 0) |
| 1308 |
|
| 1309 |
#define HAL_CE_SRC_DESC_FLAGS_RING_ID GENMASK(27, 20) |
| 1310 |
#define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT |
| 1311 |
|
| 1312 |
struct hal_ce_srng_src_desc { |
| 1313 |
u32 buffer_addr_low; |
| 1314 |
u32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */ |
| 1315 |
u32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */ |
| 1316 |
u32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */ |
| 1317 |
} __packed; |
| 1318 |
|
| 1319 |
/* |
| 1320 |
* hal_ce_srng_src_desc |
| 1321 |
* |
| 1322 |
* buffer_addr_lo |
| 1323 |
* LSB 32 bits of the 40 Bit Pointer to the source buffer |
| 1324 |
* |
| 1325 |
* buffer_addr_hi |
| 1326 |
* MSB 8 bits of the 40 Bit Pointer to the source buffer |
| 1327 |
* |
| 1328 |
* toeplitz_en |
| 1329 |
* Enable generation of 32-bit Toeplitz-LFSR hash for |
| 1330 |
* data transfer. In case of gather field in first source |
| 1331 |
* ring entry of the gather copy cycle in taken into account. |
| 1332 |
* |
| 1333 |
* src_swap |
| 1334 |
* Treats source memory organization as big-endian. For |
| 1335 |
* each dword read (4 bytes), the byte 0 is swapped with byte 3 |
| 1336 |
* and byte 1 is swapped with byte 2. |
| 1337 |
* In case of gather field in first source ring entry of |
| 1338 |
* the gather copy cycle in taken into account. |
| 1339 |
* |
| 1340 |
* dest_swap |
| 1341 |
* Treats destination memory organization as big-endian. |
| 1342 |
* For each dword write (4 bytes), the byte 0 is swapped with |
| 1343 |
* byte 3 and byte 1 is swapped with byte 2. |
| 1344 |
* In case of gather field in first source ring entry of |
| 1345 |
* the gather copy cycle in taken into account. |
| 1346 |
* |
| 1347 |
* gather |
| 1348 |
* Enables gather of multiple copy engine source |
| 1349 |
* descriptors to one destination. |
| 1350 |
* |
| 1351 |
* ce_res_0 |
| 1352 |
* Reserved |
| 1353 |
* |
| 1354 |
* |
| 1355 |
* length |
| 1356 |
* Length of the buffer in units of octets of the current |
| 1357 |
* descriptor |
| 1358 |
* |
| 1359 |
* fw_metadata |
| 1360 |
* Meta data used by FW. |
| 1361 |
* In case of gather field in first source ring entry of |
| 1362 |
* the gather copy cycle in taken into account. |
| 1363 |
* |
| 1364 |
* ce_res_1 |
| 1365 |
* Reserved |
| 1366 |
* |
| 1367 |
* ce_res_2 |
| 1368 |
* Reserved |
| 1369 |
* |
| 1370 |
* ring_id |
| 1371 |
* The buffer pointer ring ID. |
| 1372 |
* 0 refers to the IDLE ring |
| 1373 |
* 1 - N refers to other rings |
| 1374 |
* Helps with debugging when dumping ring contents. |
| 1375 |
* |
| 1376 |
* looping_count |
| 1377 |
* A count value that indicates the number of times the |
| 1378 |
* producer of entries into the Ring has looped around the |
| 1379 |
* ring. |
| 1380 |
* |
| 1381 |
* At initialization time, this value is set to 0. On the |
| 1382 |
* first loop, this value is set to 1. After the max value is |
| 1383 |
* reached allowed by the number of bits for this field, the |
| 1384 |
* count value continues with 0 again. |
| 1385 |
* |
| 1386 |
* In case SW is the consumer of the ring entries, it can |
| 1387 |
* use this field to figure out up to where the producer of |
| 1388 |
* entries has created new entries. This eliminates the need to |
| 1389 |
* check where the head pointer' of the ring is located once |
| 1390 |
* the SW starts processing an interrupt indicating that new |
| 1391 |
* entries have been put into this ring... |
| 1392 |
* |
| 1393 |
* Also note that SW if it wants only needs to look at the |
| 1394 |
* LSB bit of this count value. |
| 1395 |
*/ |
| 1396 |
|
| 1397 |
#define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) |
| 1398 |
#define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID GENMASK(27, 20) |
| 1399 |
#define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT |
| 1400 |
|
| 1401 |
struct hal_ce_srng_dest_desc { |
| 1402 |
u32 buffer_addr_low; |
| 1403 |
u32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */ |
| 1404 |
} __packed; |
| 1405 |
|
| 1406 |
/* hal_ce_srng_dest_desc |
| 1407 |
* |
| 1408 |
* dst_buffer_low |
| 1409 |
* LSB 32 bits of the 40 Bit Pointer to the Destination |
| 1410 |
* buffer |
| 1411 |
* |
| 1412 |
* dst_buffer_high |
| 1413 |
* MSB 8 bits of the 40 Bit Pointer to the Destination |
| 1414 |
* buffer |
| 1415 |
* |
| 1416 |
* ce_res_4 |
| 1417 |
* Reserved |
| 1418 |
* |
| 1419 |
* ring_id |
| 1420 |
* The buffer pointer ring ID. |
| 1421 |
* 0 refers to the IDLE ring |
| 1422 |
* 1 - N refers to other rings |
| 1423 |
* Helps with debugging when dumping ring contents. |
| 1424 |
* |
| 1425 |
* looping_count |
| 1426 |
* A count value that indicates the number of times the |
| 1427 |
* producer of entries into the Ring has looped around the |
| 1428 |
* ring. |
| 1429 |
* |
| 1430 |
* At initialization time, this value is set to 0. On the |
| 1431 |
* first loop, this value is set to 1. After the max value is |
| 1432 |
* reached allowed by the number of bits for this field, the |
| 1433 |
* count value continues with 0 again. |
| 1434 |
* |
| 1435 |
* In case SW is the consumer of the ring entries, it can |
| 1436 |
* use this field to figure out up to where the producer of |
| 1437 |
* entries has created new entries. This eliminates the need to |
| 1438 |
* check where the head pointer' of the ring is located once |
| 1439 |
* the SW starts processing an interrupt indicating that new |
| 1440 |
* entries have been put into this ring... |
| 1441 |
* |
| 1442 |
* Also note that SW if it wants only needs to look at the |
| 1443 |
* LSB bit of this count value. |
| 1444 |
*/ |
| 1445 |
|
| 1446 |
#define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN BIT(8) |
| 1447 |
#define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP BIT(9) |
| 1448 |
#define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP BIT(10) |
| 1449 |
#define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER BIT(11) |
| 1450 |
#define HAL_CE_DST_STATUS_DESC_FLAGS_LEN GENMASK(31, 16) |
| 1451 |
|
| 1452 |
#define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(15, 0) |
| 1453 |
#define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID GENMASK(27, 20) |
| 1454 |
#define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT |
| 1455 |
|
| 1456 |
struct hal_ce_srng_dst_status_desc { |
| 1457 |
u32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */ |
| 1458 |
u32 toeplitz_hash0; |
| 1459 |
u32 toeplitz_hash1; |
| 1460 |
u32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */ |
| 1461 |
} __packed; |
| 1462 |
|
| 1463 |
/* hal_ce_srng_dst_status_desc |
| 1464 |
* |
| 1465 |
* ce_res_5 |
| 1466 |
* Reserved |
| 1467 |
* |
| 1468 |
* toeplitz_en |
| 1469 |
* |
| 1470 |
* src_swap |
| 1471 |
* Source memory buffer swapped |
| 1472 |
* |
| 1473 |
* dest_swap |
| 1474 |
* Destination memory buffer swapped |
| 1475 |
* |
| 1476 |
* gather |
| 1477 |
* Gather of multiple copy engine source descriptors to one |
| 1478 |
* destination enabled |
| 1479 |
* |
| 1480 |
* ce_res_6 |
| 1481 |
* Reserved |
| 1482 |
* |
| 1483 |
* length |
| 1484 |
* Sum of all the Lengths of the source descriptor in the |
| 1485 |
* gather chain |
| 1486 |
* |
| 1487 |
* toeplitz_hash_0 |
| 1488 |
* 32 LS bits of 64 bit Toeplitz LFSR hash result |
| 1489 |
* |
| 1490 |
* toeplitz_hash_1 |
| 1491 |
* 32 MS bits of 64 bit Toeplitz LFSR hash result |
| 1492 |
* |
| 1493 |
* fw_metadata |
| 1494 |
* Meta data used by FW |
| 1495 |
* In case of gather field in first source ring entry of |
| 1496 |
* the gather copy cycle in taken into account. |
| 1497 |
* |
| 1498 |
* ce_res_7 |
| 1499 |
* Reserved |
| 1500 |
* |
| 1501 |
* ring_id |
| 1502 |
* The buffer pointer ring ID. |
| 1503 |
* 0 refers to the IDLE ring |
| 1504 |
* 1 - N refers to other rings |
| 1505 |
* Helps with debugging when dumping ring contents. |
| 1506 |
* |
| 1507 |
* looping_count |
| 1508 |
* A count value that indicates the number of times the |
| 1509 |
* producer of entries into the Ring has looped around the |
| 1510 |
* ring. |
| 1511 |
* |
| 1512 |
* At initialization time, this value is set to 0. On the |
| 1513 |
* first loop, this value is set to 1. After the max value is |
| 1514 |
* reached allowed by the number of bits for this field, the |
| 1515 |
* count value continues with 0 again. |
| 1516 |
* |
| 1517 |
* In case SW is the consumer of the ring entries, it can |
| 1518 |
* use this field to figure out up to where the producer of |
| 1519 |
* entries has created new entries. This eliminates the need to |
| 1520 |
* check where the head pointer' of the ring is located once |
| 1521 |
* the SW starts processing an interrupt indicating that new |
| 1522 |
* entries have been put into this ring... |
| 1523 |
* |
| 1524 |
* Also note that SW if it wants only needs to look at the |
| 1525 |
* LSB bit of this count value. |
| 1526 |
*/ |
| 1527 |
|
| 1528 |
#define HAL_TX_RATE_STATS_INFO0_VALID BIT(0) |
| 1529 |
#define HAL_TX_RATE_STATS_INFO0_BW GENMASK(2, 1) |
| 1530 |
#define HAL_TX_RATE_STATS_INFO0_PKT_TYPE GENMASK(6, 3) |
| 1531 |
#define HAL_TX_RATE_STATS_INFO0_STBC BIT(7) |
| 1532 |
#define HAL_TX_RATE_STATS_INFO0_LDPC BIT(8) |
| 1533 |
#define HAL_TX_RATE_STATS_INFO0_SGI GENMASK(10, 9) |
| 1534 |
#define HAL_TX_RATE_STATS_INFO0_MCS GENMASK(14, 11) |
| 1535 |
#define HAL_TX_RATE_STATS_INFO0_OFDMA_TX BIT(15) |
| 1536 |
#define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU GENMASK(27, 16) |
| 1537 |
|
| 1538 |
enum hal_tx_rate_stats_bw { |
| 1539 |
HAL_TX_RATE_STATS_BW_20, |
| 1540 |
HAL_TX_RATE_STATS_BW_40, |
| 1541 |
HAL_TX_RATE_STATS_BW_80, |
| 1542 |
HAL_TX_RATE_STATS_BW_160, |
| 1543 |
}; |
| 1544 |
|
| 1545 |
enum hal_tx_rate_stats_pkt_type { |
| 1546 |
HAL_TX_RATE_STATS_PKT_TYPE_11A, |
| 1547 |
HAL_TX_RATE_STATS_PKT_TYPE_11B, |
| 1548 |
HAL_TX_RATE_STATS_PKT_TYPE_11N, |
| 1549 |
HAL_TX_RATE_STATS_PKT_TYPE_11AC, |
| 1550 |
HAL_TX_RATE_STATS_PKT_TYPE_11AX, |
| 1551 |
}; |
| 1552 |
|
| 1553 |
enum hal_tx_rate_stats_sgi { |
| 1554 |
HAL_TX_RATE_STATS_SGI_08US, |
| 1555 |
HAL_TX_RATE_STATS_SGI_04US, |
| 1556 |
HAL_TX_RATE_STATS_SGI_16US, |
| 1557 |
HAL_TX_RATE_STATS_SGI_32US, |
| 1558 |
}; |
| 1559 |
|
| 1560 |
struct hal_tx_rate_stats { |
| 1561 |
u32 info0; |
| 1562 |
u32 tsf; |
| 1563 |
} __packed; |
| 1564 |
|
| 1565 |
struct hal_wbm_link_desc { |
| 1566 |
struct ath11k_buffer_addr buf_addr_info; |
| 1567 |
} __packed; |
| 1568 |
|
| 1569 |
/* hal_wbm_link_desc |
| 1570 |
* |
| 1571 |
* Producer: WBM |
| 1572 |
* Consumer: WBM |
| 1573 |
* |
| 1574 |
* buf_addr_info |
| 1575 |
* Details of the physical address of a buffer or MSDU |
| 1576 |
* link descriptor. |
| 1577 |
*/ |
| 1578 |
|
| 1579 |
enum hal_wbm_rel_src_module { |
| 1580 |
HAL_WBM_REL_SRC_MODULE_TQM, |
| 1581 |
HAL_WBM_REL_SRC_MODULE_RXDMA, |
| 1582 |
HAL_WBM_REL_SRC_MODULE_REO, |
| 1583 |
HAL_WBM_REL_SRC_MODULE_FW, |
| 1584 |
HAL_WBM_REL_SRC_MODULE_SW, |
| 1585 |
}; |
| 1586 |
|
| 1587 |
enum hal_wbm_rel_desc_type { |
| 1588 |
HAL_WBM_REL_DESC_TYPE_REL_MSDU, |
| 1589 |
HAL_WBM_REL_DESC_TYPE_MSDU_LINK, |
| 1590 |
HAL_WBM_REL_DESC_TYPE_MPDU_LINK, |
| 1591 |
HAL_WBM_REL_DESC_TYPE_MSDU_EXT, |
| 1592 |
HAL_WBM_REL_DESC_TYPE_QUEUE_EXT, |
| 1593 |
}; |
| 1594 |
|
| 1595 |
/* hal_wbm_rel_desc_type |
| 1596 |
* |
| 1597 |
* msdu_buffer |
| 1598 |
* The address points to an MSDU buffer |
| 1599 |
* |
| 1600 |
* msdu_link_descriptor |
| 1601 |
* The address points to an Tx MSDU link descriptor |
| 1602 |
* |
| 1603 |
* mpdu_link_descriptor |
| 1604 |
* The address points to an MPDU link descriptor |
| 1605 |
* |
| 1606 |
* msdu_ext_descriptor |
| 1607 |
* The address points to an MSDU extension descriptor |
| 1608 |
* |
| 1609 |
* queue_ext_descriptor |
| 1610 |
* The address points to an TQM queue extension descriptor. WBM should |
| 1611 |
* treat this is the same way as a link descriptor. |
| 1612 |
*/ |
| 1613 |
|
| 1614 |
enum hal_wbm_rel_bm_act { |
| 1615 |
HAL_WBM_REL_BM_ACT_PUT_IN_IDLE, |
| 1616 |
HAL_WBM_REL_BM_ACT_REL_MSDU, |
| 1617 |
}; |
| 1618 |
|
| 1619 |
/* hal_wbm_rel_bm_act |
| 1620 |
* |
| 1621 |
* put_in_idle_list |
| 1622 |
* Put the buffer or descriptor back in the idle list. In case of MSDU or |
| 1623 |
* MDPU link descriptor, BM does not need to check to release any |
| 1624 |
* individual MSDU buffers. |
| 1625 |
* |
| 1626 |
* release_msdu_list |
| 1627 |
* This BM action can only be used in combination with desc_type being |
| 1628 |
* msdu_link_descriptor. Field first_msdu_index points out which MSDU |
| 1629 |
* pointer in the MSDU link descriptor is the first of an MPDU that is |
| 1630 |
* released. BM shall release all the MSDU buffers linked to this first |
| 1631 |
* MSDU buffer pointer. All related MSDU buffer pointer entries shall be |
| 1632 |
* set to value 0, which represents the 'NULL' pointer. When all MSDU |
| 1633 |
* buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link |
| 1634 |
* descriptor itself shall also be released. |
| 1635 |
*/ |
| 1636 |
|
| 1637 |
#define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE GENMASK(2, 0) |
| 1638 |
#define HAL_WBM_RELEASE_INFO0_BM_ACTION GENMASK(5, 3) |
| 1639 |
#define HAL_WBM_RELEASE_INFO0_DESC_TYPE GENMASK(8, 6) |
| 1640 |
#define HAL_WBM_RELEASE_INFO0_FIRST_MSDU_IDX GENMASK(12, 9) |
| 1641 |
#define HAL_WBM_RELEASE_INFO0_TQM_RELEASE_REASON GENMASK(16, 13) |
| 1642 |
#define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) |
| 1643 |
#define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) |
| 1644 |
#define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON GENMASK(25, 24) |
| 1645 |
#define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE GENMASK(30, 26) |
| 1646 |
#define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR BIT(31) |
| 1647 |
|
| 1648 |
#define HAL_WBM_RELEASE_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0) |
| 1649 |
#define HAL_WBM_RELEASE_INFO1_TRANSMIT_COUNT GENMASK(30, 24) |
| 1650 |
|
| 1651 |
#define HAL_WBM_RELEASE_INFO2_ACK_FRAME_RSSI GENMASK(7, 0) |
| 1652 |
#define HAL_WBM_RELEASE_INFO2_SW_REL_DETAILS_VALID BIT(8) |
| 1653 |
#define HAL_WBM_RELEASE_INFO2_FIRST_MSDU BIT(9) |
| 1654 |
#define HAL_WBM_RELEASE_INFO2_LAST_MSDU BIT(10) |
| 1655 |
#define HAL_WBM_RELEASE_INFO2_MSDU_IN_AMSDU BIT(11) |
| 1656 |
#define HAL_WBM_RELEASE_INFO2_FW_TX_NOTIF_FRAME BIT(12) |
| 1657 |
#define HAL_WBM_RELEASE_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13) |
| 1658 |
|
| 1659 |
#define HAL_WBM_RELEASE_INFO3_PEER_ID GENMASK(15, 0) |
| 1660 |
#define HAL_WBM_RELEASE_INFO3_TID GENMASK(19, 16) |
| 1661 |
#define HAL_WBM_RELEASE_INFO3_RING_ID GENMASK(27, 20) |
| 1662 |
#define HAL_WBM_RELEASE_INFO3_LOOPING_COUNT GENMASK(31, 28) |
| 1663 |
|
| 1664 |
#define HAL_WBM_REL_HTT_TX_COMP_INFO0_STATUS GENMASK(12, 9) |
| 1665 |
#define HAL_WBM_REL_HTT_TX_COMP_INFO0_REINJ_REASON GENMASK(16, 13) |
| 1666 |
#define HAL_WBM_REL_HTT_TX_COMP_INFO0_EXP_FRAME BIT(17) |
| 1667 |
|
| 1668 |
struct hal_wbm_release_ring { |
| 1669 |
struct ath11k_buffer_addr buf_addr_info; |
| 1670 |
u32 info0; |
| 1671 |
u32 info1; |
| 1672 |
u32 info2; |
| 1673 |
struct hal_tx_rate_stats rate_stats; |
| 1674 |
u32 info3; |
| 1675 |
} __packed; |
| 1676 |
|
| 1677 |
/* hal_wbm_release_ring |
| 1678 |
* |
| 1679 |
* Producer: SW/TQM/RXDMA/REO/SWITCH |
| 1680 |
* Consumer: WBM/SW/FW |
| 1681 |
* |
| 1682 |
* HTT tx status is overlaid on wbm_release ring on 4-byte words 2, 3, 4 and 5 |
| 1683 |
* for software based completions. |
| 1684 |
* |
| 1685 |
* buf_addr_info |
| 1686 |
* Details of the physical address of the buffer or link descriptor. |
| 1687 |
* |
| 1688 |
* release_source_module |
| 1689 |
* Indicates which module initiated the release of this buffer/descriptor. |
| 1690 |
* Values are defined in enum %HAL_WBM_REL_SRC_MODULE_. |
| 1691 |
* |
| 1692 |
* bm_action |
| 1693 |
* Field only valid when the field return_buffer_manager in |
| 1694 |
* Released_buff_or_desc_addr_info indicates: |
| 1695 |
* WBM_IDLE_BUF_LIST / WBM_IDLE_DESC_LIST |
| 1696 |
* Values are defined in enum %HAL_WBM_REL_BM_ACT_. |
| 1697 |
* |
| 1698 |
* buffer_or_desc_type |
| 1699 |
* Field only valid when WBM is marked as the return_buffer_manager in |
| 1700 |
* the Released_Buffer_address_info. Indicates that type of buffer or |
| 1701 |
* descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE. |
| 1702 |
* |
| 1703 |
* first_msdu_index |
| 1704 |
* Field only valid for the bm_action release_msdu_list. The index of the |
| 1705 |
* first MSDU in an MSDU link descriptor all belonging to the same MPDU. |
| 1706 |
* |
| 1707 |
* tqm_release_reason |
| 1708 |
* Field only valid when Release_source_module is set to release_source_TQM |
| 1709 |
* Release reasons are defined in enum %HAL_WBM_TQM_REL_REASON_. |
| 1710 |
* |
| 1711 |
* rxdma_push_reason |
| 1712 |
* reo_push_reason |
| 1713 |
* Indicates why rxdma/reo pushed the frame to this ring and values are |
| 1714 |
* defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. |
| 1715 |
* |
| 1716 |
* rxdma_error_code |
| 1717 |
* Field only valid when 'rxdma_push_reason' set to 'error_detected'. |
| 1718 |
* Values are defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. |
| 1719 |
* |
| 1720 |
* reo_error_code |
| 1721 |
* Field only valid when 'reo_push_reason' set to 'error_detected'. Values |
| 1722 |
* are defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. |
| 1723 |
* |
| 1724 |
* wbm_internal_error |
| 1725 |
* Is set when WBM got a buffer pointer but the action was to push it to |
| 1726 |
* the idle link descriptor ring or do link related activity OR |
| 1727 |
* Is set when WBM got a link buffer pointer but the action was to push it |
| 1728 |
* to the buffer descriptor ring. |
| 1729 |
* |
| 1730 |
* tqm_status_number |
| 1731 |
* The value in this field is equal to tqm_cmd_number in TQM command. It is |
| 1732 |
* used to correlate the statu with TQM commands. Only valid when |
| 1733 |
* release_source_module is TQM. |
| 1734 |
* |
| 1735 |
* transmit_count |
| 1736 |
* The number of times the frame has been transmitted, valid only when |
| 1737 |
* release source in TQM. |
| 1738 |
* |
| 1739 |
* ack_frame_rssi |
| 1740 |
* This field is only valid when the source is TQM. If this frame is |
| 1741 |
* removed as the result of the reception of an ACK or BA, this field |
| 1742 |
* indicates the RSSI of the received ACK or BA frame. |
| 1743 |
* |
| 1744 |
* sw_release_details_valid |
| 1745 |
* This is set when WMB got a 'release_msdu_list' command from TQM and |
| 1746 |
* return buffer manager is not WMB. WBM will then de-aggregate all MSDUs |
| 1747 |
* and pass them one at a time on to the 'buffer owner'. |
| 1748 |
* |
| 1749 |
* first_msdu |
| 1750 |
* Field only valid when SW_release_details_valid is set. |
| 1751 |
* When set, this MSDU is the first MSDU pointed to in the |
| 1752 |
* 'release_msdu_list' command. |
| 1753 |
* |
| 1754 |
* last_msdu |
| 1755 |
* Field only valid when SW_release_details_valid is set. |
| 1756 |
* When set, this MSDU is the last MSDU pointed to in the |
| 1757 |
* 'release_msdu_list' command. |
| 1758 |
* |
| 1759 |
* msdu_part_of_amsdu |
| 1760 |
* Field only valid when SW_release_details_valid is set. |
| 1761 |
* When set, this MSDU was part of an A-MSDU in MPDU |
| 1762 |
* |
| 1763 |
* fw_tx_notify_frame |
| 1764 |
* Field only valid when SW_release_details_valid is set. |
| 1765 |
* |
| 1766 |
* buffer_timestamp |
| 1767 |
* Field only valid when SW_release_details_valid is set. |
| 1768 |
* This is the Buffer_timestamp field from the |
| 1769 |
* Timestamp in units of 1024 us |
| 1770 |
* |
| 1771 |
* struct hal_tx_rate_stats rate_stats |
| 1772 |
* Details for command execution tracking purposes. |
| 1773 |
* |
| 1774 |
* sw_peer_id |
| 1775 |
* tid |
| 1776 |
* Field only valid when Release_source_module is set to |
| 1777 |
* release_source_TQM |
| 1778 |
* |
| 1779 |
* 1) Release of msdu buffer due to drop_frame = 1. Flow is |
| 1780 |
* not fetched and hence sw_peer_id and tid = 0 |
| 1781 |
* |
| 1782 |
* buffer_or_desc_type = e_num 0 |
| 1783 |
* MSDU_rel_buffertqm_release_reason = e_num 1 |
| 1784 |
* tqm_rr_rem_cmd_rem |
| 1785 |
* |
| 1786 |
* 2) Release of msdu buffer due to Flow is not fetched and |
| 1787 |
* hence sw_peer_id and tid = 0 |
| 1788 |
* |
| 1789 |
* buffer_or_desc_type = e_num 0 |
| 1790 |
* MSDU_rel_buffertqm_release_reason = e_num 1 |
| 1791 |
* tqm_rr_rem_cmd_rem |
| 1792 |
* |
| 1793 |
* 3) Release of msdu link due to remove_mpdu or acked_mpdu |
| 1794 |
* command. |
| 1795 |
* |
| 1796 |
* buffer_or_desc_type = e_num1 |
| 1797 |
* msdu_link_descriptortqm_release_reason can be:e_num 1 |
| 1798 |
* tqm_rr_rem_cmd_reme_num 2 tqm_rr_rem_cmd_tx |
| 1799 |
* e_num 3 tqm_rr_rem_cmd_notxe_num 4 tqm_rr_rem_cmd_aged |
| 1800 |
* |
| 1801 |
* This field represents the TID from the TX_MSDU_FLOW |
| 1802 |
* descriptor or TX_MPDU_QUEUE descriptor |
| 1803 |
* |
| 1804 |
* rind_id |
| 1805 |
* For debugging. |
| 1806 |
* This field is filled in by the SRNG module. |
| 1807 |
* It help to identify the ring that is being looked |
| 1808 |
* |
| 1809 |
* looping_count |
| 1810 |
* A count value that indicates the number of times the |
| 1811 |
* producer of entries into the Buffer Manager Ring has looped |
| 1812 |
* around the ring. |
| 1813 |
* |
| 1814 |
* At initialization time, this value is set to 0. On the |
| 1815 |
* first loop, this value is set to 1. After the max value is |
| 1816 |
* reached allowed by the number of bits for this field, the |
| 1817 |
* count value continues with 0 again. |
| 1818 |
* |
| 1819 |
* In case SW is the consumer of the ring entries, it can |
| 1820 |
* use this field to figure out up to where the producer of |
| 1821 |
* entries has created new entries. This eliminates the need to |
| 1822 |
* check where the head pointer' of the ring is located once |
| 1823 |
* the SW starts processing an interrupt indicating that new |
| 1824 |
* entries have been put into this ring... |
| 1825 |
* |
| 1826 |
* Also note that SW if it wants only needs to look at the |
| 1827 |
* LSB bit of this count value. |
| 1828 |
*/ |
| 1829 |
|
| 1830 |
/** |
| 1831 |
* enum hal_wbm_tqm_rel_reason - TQM release reason code |
| 1832 |
* @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame |
| 1833 |
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW |
| 1834 |
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus |
| 1835 |
* initiated by sw. |
| 1836 |
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus |
| 1837 |
* initiated by sw. |
| 1838 |
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or |
| 1839 |
* mpdus. |
| 1840 |
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by |
| 1841 |
* fw with fw_reason1. |
| 1842 |
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by |
| 1843 |
* fw with fw_reason2. |
| 1844 |
* @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by |
| 1845 |
* fw with fw_reason3. |
| 1846 |
*/ |
| 1847 |
enum hal_wbm_tqm_rel_reason { |
| 1848 |
HAL_WBM_TQM_REL_REASON_FRAME_ACKED, |
| 1849 |
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU, |
| 1850 |
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX, |
| 1851 |
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX, |
| 1852 |
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES, |
| 1853 |
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1, |
| 1854 |
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2, |
| 1855 |
HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3, |
| 1856 |
}; |
| 1857 |
|
| 1858 |
struct hal_wbm_buffer_ring { |
| 1859 |
struct ath11k_buffer_addr buf_addr_info; |
| 1860 |
}; |
| 1861 |
|
| 1862 |
enum hal_desc_owner { |
| 1863 |
HAL_DESC_OWNER_WBM, |
| 1864 |
HAL_DESC_OWNER_SW, |
| 1865 |
HAL_DESC_OWNER_TQM, |
| 1866 |
HAL_DESC_OWNER_RXDMA, |
| 1867 |
HAL_DESC_OWNER_REO, |
| 1868 |
HAL_DESC_OWNER_SWITCH, |
| 1869 |
}; |
| 1870 |
|
| 1871 |
enum hal_desc_buf_type { |
| 1872 |
HAL_DESC_BUF_TYPE_TX_MSDU_LINK, |
| 1873 |
HAL_DESC_BUF_TYPE_TX_MPDU_LINK, |
| 1874 |
HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD, |
| 1875 |
HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT, |
| 1876 |
HAL_DESC_BUF_TYPE_TX_FLOW, |
| 1877 |
HAL_DESC_BUF_TYPE_TX_BUFFER, |
| 1878 |
HAL_DESC_BUF_TYPE_RX_MSDU_LINK, |
| 1879 |
HAL_DESC_BUF_TYPE_RX_MPDU_LINK, |
| 1880 |
HAL_DESC_BUF_TYPE_RX_REO_QUEUE, |
| 1881 |
HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT, |
| 1882 |
HAL_DESC_BUF_TYPE_RX_BUFFER, |
| 1883 |
HAL_DESC_BUF_TYPE_IDLE_LINK, |
| 1884 |
}; |
| 1885 |
|
| 1886 |
#define HAL_DESC_REO_OWNED 4 |
| 1887 |
#define HAL_DESC_REO_QUEUE_DESC 8 |
| 1888 |
#define HAL_DESC_REO_QUEUE_EXT_DESC 9 |
| 1889 |
#define HAL_DESC_REO_NON_QOS_TID 16 |
| 1890 |
|
| 1891 |
#define HAL_DESC_HDR_INFO0_OWNER GENMASK(3, 0) |
| 1892 |
#define HAL_DESC_HDR_INFO0_BUF_TYPE GENMASK(7, 4) |
| 1893 |
#define HAL_DESC_HDR_INFO0_DBG_RESERVED GENMASK(31, 8) |
| 1894 |
|
| 1895 |
struct hal_desc_header { |
| 1896 |
u32 info0; |
| 1897 |
} __packed; |
| 1898 |
|
| 1899 |
struct hal_rx_mpdu_link_ptr { |
| 1900 |
struct ath11k_buffer_addr addr_info; |
| 1901 |
} __packed; |
| 1902 |
|
| 1903 |
struct hal_rx_msdu_details { |
| 1904 |
struct ath11k_buffer_addr buf_addr_info; |
| 1905 |
struct rx_msdu_desc rx_msdu_info; |
| 1906 |
} __packed; |
| 1907 |
|
| 1908 |
#define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER GENMASK(15, 0) |
| 1909 |
#define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK BIT(16) |
| 1910 |
|
| 1911 |
struct hal_rx_msdu_link { |
| 1912 |
struct hal_desc_header desc_hdr; |
| 1913 |
struct ath11k_buffer_addr buf_addr_info; |
| 1914 |
u32 info0; |
| 1915 |
u32 pn[4]; |
| 1916 |
struct hal_rx_msdu_details msdu_link[6]; |
| 1917 |
} __packed; |
| 1918 |
|
| 1919 |
struct hal_rx_reo_queue_ext { |
| 1920 |
struct hal_desc_header desc_hdr; |
| 1921 |
u32 rsvd; |
| 1922 |
struct hal_rx_mpdu_link_ptr mpdu_link[15]; |
| 1923 |
} __packed; |
| 1924 |
|
| 1925 |
/* hal_rx_reo_queue_ext |
| 1926 |
* Consumer: REO |
| 1927 |
* Producer: REO |
| 1928 |
* |
| 1929 |
* descriptor_header |
| 1930 |
* Details about which module owns this struct. |
| 1931 |
* |
| 1932 |
* mpdu_link |
| 1933 |
* Pointer to the next MPDU_link descriptor in the MPDU queue. |
| 1934 |
*/ |
| 1935 |
|
| 1936 |
enum hal_rx_reo_queue_pn_size { |
| 1937 |
HAL_RX_REO_QUEUE_PN_SIZE_24, |
| 1938 |
HAL_RX_REO_QUEUE_PN_SIZE_48, |
| 1939 |
HAL_RX_REO_QUEUE_PN_SIZE_128, |
| 1940 |
}; |
| 1941 |
|
| 1942 |
#define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER GENMASK(15, 0) |
| 1943 |
|
| 1944 |
#define HAL_RX_REO_QUEUE_INFO0_VLD BIT(0) |
| 1945 |
#define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER GENMASK(2, 1) |
| 1946 |
#define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION BIT(3) |
| 1947 |
#define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN BIT(4) |
| 1948 |
#define HAL_RX_REO_QUEUE_INFO0_AC GENMASK(6, 5) |
| 1949 |
#define HAL_RX_REO_QUEUE_INFO0_BAR BIT(7) |
| 1950 |
#define HAL_RX_REO_QUEUE_INFO0_RETRY BIT(8) |
| 1951 |
#define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE BIT(9) |
| 1952 |
#define HAL_RX_REO_QUEUE_INFO0_OOR_MODE BIT(10) |
| 1953 |
#define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE GENMASK(18, 11) |
| 1954 |
#define HAL_RX_REO_QUEUE_INFO0_PN_CHECK BIT(19) |
| 1955 |
#define HAL_RX_REO_QUEUE_INFO0_EVEN_PN BIT(20) |
| 1956 |
#define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN BIT(21) |
| 1957 |
#define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE BIT(22) |
| 1958 |
#define HAL_RX_REO_QUEUE_INFO0_PN_SIZE GENMASK(24, 23) |
| 1959 |
#define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG BIT(25) |
| 1960 |
|
| 1961 |
#define HAL_RX_REO_QUEUE_INFO1_SVLD BIT(0) |
| 1962 |
#define HAL_RX_REO_QUEUE_INFO1_SSN GENMASK(12, 1) |
| 1963 |
#define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX GENMASK(20, 13) |
| 1964 |
#define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR BIT(21) |
| 1965 |
#define HAL_RX_REO_QUEUE_INFO1_PN_ERR BIT(22) |
| 1966 |
#define HAL_RX_REO_QUEUE_INFO1_PN_VALID BIT(31) |
| 1967 |
|
| 1968 |
#define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT GENMASK(6, 0) |
| 1969 |
#define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT (31, 7) |
| 1970 |
|
| 1971 |
#define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT GENMASK(9, 4) |
| 1972 |
#define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT GENMASK(15, 10) |
| 1973 |
#define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 16) |
| 1974 |
|
| 1975 |
#define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT GENMASK(23, 0) |
| 1976 |
#define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT GENMASK(31, 24) |
| 1977 |
|
| 1978 |
#define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT GENMASK(11, 0) |
| 1979 |
#define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K GENMASK(15, 12) |
| 1980 |
#define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT GENMASK(31, 16) |
| 1981 |
|
| 1982 |
struct hal_rx_reo_queue { |
| 1983 |
struct hal_desc_header desc_hdr; |
| 1984 |
u32 rx_queue_num; |
| 1985 |
u32 info0; |
| 1986 |
u32 info1; |
| 1987 |
u32 pn[4]; |
| 1988 |
u32 last_rx_enqueue_timestamp; |
| 1989 |
u32 last_rx_dequeue_timestamp; |
| 1990 |
u32 next_aging_queue[2]; |
| 1991 |
u32 prev_aging_queue[2]; |
| 1992 |
u32 rx_bitmap[8]; |
| 1993 |
u32 info2; |
| 1994 |
u32 info3; |
| 1995 |
u32 info4; |
| 1996 |
u32 processed_mpdus; |
| 1997 |
u32 processed_msdus; |
| 1998 |
u32 processed_total_bytes; |
| 1999 |
u32 info5; |
| 2000 |
u32 rsvd[3]; |
| 2001 |
struct hal_rx_reo_queue_ext ext_desc[]; |
| 2002 |
} __packed; |
| 2003 |
|
| 2004 |
/* hal_rx_reo_queue |
| 2005 |
* |
| 2006 |
* descriptor_header |
| 2007 |
* Details about which module owns this struct. Note that sub field |
| 2008 |
* Buffer_type shall be set to receive_reo_queue_descriptor. |
| 2009 |
* |
| 2010 |
* receive_queue_number |
| 2011 |
* Indicates the MPDU queue ID to which this MPDU link descriptor belongs. |
| 2012 |
* |
| 2013 |
* vld |
| 2014 |
* Valid bit indicating a session is established and the queue descriptor |
| 2015 |
* is valid. |
| 2016 |
* associated_link_descriptor_counter |
| 2017 |
* Indicates which of the 3 link descriptor counters shall be incremented |
| 2018 |
* or decremented when link descriptors are added or removed from this |
| 2019 |
* flow queue. |
| 2020 |
* disable_duplicate_detection |
| 2021 |
* When set, do not perform any duplicate detection. |
| 2022 |
* soft_reorder_enable |
| 2023 |
* When set, REO has been instructed to not perform the actual re-ordering |
| 2024 |
* of frames for this queue, but just to insert the reorder opcodes. |
| 2025 |
* ac |
| 2026 |
* Indicates the access category of the queue descriptor. |
| 2027 |
* bar |
| 2028 |
* Indicates if BAR has been received. |
| 2029 |
* retry |
| 2030 |
* Retry bit is checked if this bit is set. |
| 2031 |
* chk_2k_mode |
| 2032 |
* Indicates what type of operation is expected from Reo when the received |
| 2033 |
* frame SN falls within the 2K window. |
| 2034 |
* oor_mode |
| 2035 |
* Indicates what type of operation is expected when the received frame |
| 2036 |
* falls within the OOR window. |
| 2037 |
* ba_window_size |
| 2038 |
* Indicates the negotiated (window size + 1). Max of 256 bits. |
| 2039 |
* |
| 2040 |
* A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA |
| 2041 |
* session, with window size of 0). The 3 values here are the main values |
| 2042 |
* validated, but other values should work as well. |
| 2043 |
* |
| 2044 |
* A BA window size of 0 (=> one frame entry bitmat), means that there is |
| 2045 |
* no additional rx_reo_queue_ext desc. following rx_reo_queue in memory. |
| 2046 |
* A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext. |
| 2047 |
* A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext. |
| 2048 |
* A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext. |
| 2049 |
* pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable, |
| 2050 |
* pn_size |
| 2051 |
* REO shall perform the PN increment check, even number check, uneven |
| 2052 |
* number check, PN error check and size of the PN field check. |
| 2053 |
* ignore_ampdu_flag |
| 2054 |
* REO shall ignore the ampdu_flag on entrance descriptor for this queue. |
| 2055 |
* |
| 2056 |
* svld |
| 2057 |
* Sequence number in next field is valid one. |
| 2058 |
* ssn |
| 2059 |
* Starting Sequence number of the session. |
| 2060 |
* current_index |
| 2061 |
* Points to last forwarded packet |
| 2062 |
* seq_2k_error_detected_flag |
| 2063 |
* REO has detected a 2k error jump in the sequence number and from that |
| 2064 |
* moment forward, all new frames are forwarded directly to FW, without |
| 2065 |
* duplicate detect, reordering, etc. |
| 2066 |
* pn_error_detected_flag |
| 2067 |
* REO has detected a PN error. |
| 2068 |
*/ |
| 2069 |
|
| 2070 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) |
| 2071 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM BIT(8) |
| 2072 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD BIT(9) |
| 2073 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT BIT(10) |
| 2074 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION BIT(11) |
| 2075 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN BIT(12) |
| 2076 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC BIT(13) |
| 2077 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR BIT(14) |
| 2078 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY BIT(15) |
| 2079 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE BIT(16) |
| 2080 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE BIT(17) |
| 2081 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE BIT(18) |
| 2082 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK BIT(19) |
| 2083 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN BIT(20) |
| 2084 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN BIT(21) |
| 2085 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE BIT(22) |
| 2086 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE BIT(23) |
| 2087 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG BIT(24) |
| 2088 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD BIT(25) |
| 2089 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN BIT(26) |
| 2090 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR BIT(27) |
| 2091 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR BIT(28) |
| 2092 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID BIT(29) |
| 2093 |
#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN BIT(30) |
| 2094 |
|
| 2095 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER GENMASK(15, 0) |
| 2096 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_VLD BIT(16) |
| 2097 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER GENMASK(18, 17) |
| 2098 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION BIT(19) |
| 2099 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN BIT(20) |
| 2100 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_AC GENMASK(22, 21) |
| 2101 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_BAR BIT(23) |
| 2102 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY BIT(24) |
| 2103 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE BIT(25) |
| 2104 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE BIT(26) |
| 2105 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK BIT(27) |
| 2106 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN BIT(28) |
| 2107 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN BIT(29) |
| 2108 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE BIT(30) |
| 2109 |
#define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG BIT(31) |
| 2110 |
|
| 2111 |
#define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE GENMASK(7, 0) |
| 2112 |
#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE GENMASK(9, 8) |
| 2113 |
#define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD BIT(10) |
| 2114 |
#define HAL_REO_UPD_RX_QUEUE_INFO2_SSN GENMASK(22, 11) |
| 2115 |
#define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR BIT(23) |
| 2116 |
#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR BIT(24) |
| 2117 |
#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID BIT(25) |
| 2118 |
|
| 2119 |
struct hal_reo_update_rx_queue { |
| 2120 |
struct hal_reo_cmd_hdr cmd; |
| 2121 |
u32 queue_addr_lo; |
| 2122 |
u32 info0; |
| 2123 |
u32 info1; |
| 2124 |
u32 info2; |
| 2125 |
u32 pn[4]; |
| 2126 |
} __packed; |
| 2127 |
|
| 2128 |
#define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE BIT(0) |
| 2129 |
#define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX GENMASK(2, 1) |
| 2130 |
|
| 2131 |
struct hal_reo_unblock_cache { |
| 2132 |
struct hal_reo_cmd_hdr cmd; |
| 2133 |
u32 info0; |
| 2134 |
u32 rsvd[7]; |
| 2135 |
} __packed; |
| 2136 |
|
| 2137 |
enum hal_reo_exec_status { |
| 2138 |
HAL_REO_EXEC_STATUS_SUCCESS, |
| 2139 |
HAL_REO_EXEC_STATUS_BLOCKED, |
| 2140 |
HAL_REO_EXEC_STATUS_FAILED, |
| 2141 |
HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED, |
| 2142 |
}; |
| 2143 |
|
| 2144 |
#define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM GENMASK(15, 0) |
| 2145 |
#define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME GENMASK(25, 16) |
| 2146 |
#define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS GENMASK(27, 26) |
| 2147 |
|
| 2148 |
struct hal_reo_status_hdr { |
| 2149 |
u32 info0; |
| 2150 |
u32 timestamp; |
| 2151 |
} __packed; |
| 2152 |
|
| 2153 |
/* hal_reo_status_hdr |
| 2154 |
* Producer: REO |
| 2155 |
* Consumer: SW |
| 2156 |
* |
| 2157 |
* status_num |
| 2158 |
* The value in this field is equal to value of the reo command |
| 2159 |
* number. This field helps to correlate the statuses with the REO |
| 2160 |
* commands. |
| 2161 |
* |
| 2162 |
* execution_time (in us) |
| 2163 |
* The amount of time REO took to execute the command. Note that |
| 2164 |
* this time does not include the duration of the command waiting |
| 2165 |
* in the command ring, before the execution started. |
| 2166 |
* |
| 2167 |
* execution_status |
| 2168 |
* Execution status of the command. Values are defined in |
| 2169 |
* enum %HAL_REO_EXEC_STATUS_. |
| 2170 |
*/ |
| 2171 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN GENMASK(11, 0) |
| 2172 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX GENMASK(19, 12) |
| 2173 |
|
| 2174 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT GENMASK(6, 0) |
| 2175 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT GENMASK(31, 7) |
| 2176 |
|
| 2177 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT GENMASK(9, 4) |
| 2178 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT GENMASK(15, 10) |
| 2179 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT GENMASK(31, 16) |
| 2180 |
|
| 2181 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT GENMASK(23, 0) |
| 2182 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT GENMASK(31, 24) |
| 2183 |
|
| 2184 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU GENMASK(11, 0) |
| 2185 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_WINDOW_JMP2K GENMASK(15, 12) |
| 2186 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT GENMASK(31, 16) |
| 2187 |
|
| 2188 |
#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT GENMASK(31, 28) |
| 2189 |
|
| 2190 |
struct hal_reo_get_queue_stats_status { |
| 2191 |
struct hal_reo_status_hdr hdr; |
| 2192 |
u32 info0; |
| 2193 |
u32 pn[4]; |
| 2194 |
u32 last_rx_enqueue_timestamp; |
| 2195 |
u32 last_rx_dequeue_timestamp; |
| 2196 |
u32 rx_bitmap[8]; |
| 2197 |
u32 info1; |
| 2198 |
u32 info2; |
| 2199 |
u32 info3; |
| 2200 |
u32 num_mpdu_frames; |
| 2201 |
u32 num_msdu_frames; |
| 2202 |
u32 total_bytes; |
| 2203 |
u32 info4; |
| 2204 |
u32 info5; |
| 2205 |
} __packed; |
| 2206 |
|
| 2207 |
/* hal_reo_get_queue_stats_status |
| 2208 |
* Producer: REO |
| 2209 |
* Consumer: SW |
| 2210 |
* |
| 2211 |
* status_hdr |
| 2212 |
* Details that can link this status with the original command. It |
| 2213 |
* also contains info on how long REO took to execute this command. |
| 2214 |
* |
| 2215 |
* ssn |
| 2216 |
* Starting Sequence number of the session, this changes whenever |
| 2217 |
* window moves (can be filled by SW then maintained by REO). |
| 2218 |
* |
| 2219 |
* current_index |
| 2220 |
* Points to last forwarded packet. |
| 2221 |
* |
| 2222 |
* pn |
| 2223 |
* Bits of the PN number. |
| 2224 |
* |
| 2225 |
* last_rx_enqueue_timestamp |
| 2226 |
* last_rx_dequeue_timestamp |
| 2227 |
* Timestamp of arrival of the last MPDU for this queue and |
| 2228 |
* Timestamp of forwarding an MPDU accordingly. |
| 2229 |
* |
| 2230 |
* rx_bitmap |
| 2231 |
* When a bit is set, the corresponding frame is currently held |
| 2232 |
* in the re-order queue. The bitmap is Fully managed by HW. |
| 2233 |
* |
| 2234 |
* current_mpdu_count |
| 2235 |
* current_msdu_count |
| 2236 |
* The number of MPDUs and MSDUs in the queue. |
| 2237 |
* |
| 2238 |
* timeout_count |
| 2239 |
* The number of times REO started forwarding frames even though |
| 2240 |
* there is a hole in the bitmap. Forwarding reason is timeout. |
| 2241 |
* |
| 2242 |
* forward_due_to_bar_count |
| 2243 |
* The number of times REO started forwarding frames even though |
| 2244 |
* there is a hole in the bitmap. Fwd reason is reception of BAR. |
| 2245 |
* |
| 2246 |
* duplicate_count |
| 2247 |
* The number of duplicate frames that have been detected. |
| 2248 |
* |
| 2249 |
* frames_in_order_count |
| 2250 |
* The number of frames that have been received in order (without |
| 2251 |
* a hole that prevented them from being forwarded immediately). |
| 2252 |
* |
| 2253 |
* bar_received_count |
| 2254 |
* The number of times a BAR frame is received. |
| 2255 |
* |
| 2256 |
* mpdu_frames_processed_count |
| 2257 |
* msdu_frames_processed_count |
| 2258 |
* The total number of MPDU/MSDU frames that have been processed. |
| 2259 |
* |
| 2260 |
* total_bytes |
| 2261 |
* An approximation of the number of bytes received for this queue. |
| 2262 |
* |
| 2263 |
* late_receive_mpdu_count |
| 2264 |
* The number of MPDUs received after the window had already moved |
| 2265 |
* on. The 'late' sequence window is defined as |
| 2266 |
* (Window SSN - 256) - (Window SSN - 1). |
| 2267 |
* |
| 2268 |
* window_jump_2k |
| 2269 |
* The number of times the window moved more than 2K |
| 2270 |
* |
| 2271 |
* hole_count |
| 2272 |
* The number of times a hole was created in the receive bitmap. |
| 2273 |
* |
| 2274 |
* looping_count |
| 2275 |
* A count value that indicates the number of times the producer of |
| 2276 |
* entries into this Ring has looped around the ring. |
| 2277 |
*/ |
| 2278 |
|
| 2279 |
#define HAL_REO_STATUS_LOOP_CNT GENMASK(31, 28) |
| 2280 |
|
| 2281 |
#define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED BIT(0) |
| 2282 |
#define HAL_REO_FLUSH_QUEUE_INFO0_RSVD GENMASK(31, 1) |
| 2283 |
#define HAL_REO_FLUSH_QUEUE_INFO1_RSVD GENMASK(27, 0) |
| 2284 |
|
| 2285 |
struct hal_reo_flush_queue_status { |
| 2286 |
struct hal_reo_status_hdr hdr; |
| 2287 |
u32 info0; |
| 2288 |
u32 rsvd0[21]; |
| 2289 |
u32 info1; |
| 2290 |
} __packed; |
| 2291 |
|
| 2292 |
/* hal_reo_flush_queue_status |
| 2293 |
* Producer: REO |
| 2294 |
* Consumer: SW |
| 2295 |
* |
| 2296 |
* status_hdr |
| 2297 |
* Details that can link this status with the original command. It |
| 2298 |
* also contains info on how long REO took to execute this command. |
| 2299 |
* |
| 2300 |
* error_detected |
| 2301 |
* Status of blocking resource |
| 2302 |
* |
| 2303 |
* 0 - No error has been detected while executing this command |
| 2304 |
* 1 - Error detected. The resource to be used for blocking was |
| 2305 |
* already in use. |
| 2306 |
* |
| 2307 |
* looping_count |
| 2308 |
* A count value that indicates the number of times the producer of |
| 2309 |
* entries into this Ring has looped around the ring. |
| 2310 |
*/ |
| 2311 |
|
| 2312 |
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR BIT(0) |
| 2313 |
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE GENMASK(2, 1) |
| 2314 |
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT BIT(8) |
| 2315 |
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE GENMASK(11, 9) |
| 2316 |
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID GENMASK(15, 12) |
| 2317 |
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR GENMASK(17, 16) |
| 2318 |
#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT GENMASK(25, 18) |
| 2319 |
|
| 2320 |
struct hal_reo_flush_cache_status { |
| 2321 |
struct hal_reo_status_hdr hdr; |
| 2322 |
u32 info0; |
| 2323 |
u32 rsvd0[21]; |
| 2324 |
u32 info1; |
| 2325 |
} __packed; |
| 2326 |
|
| 2327 |
/* hal_reo_flush_cache_status |
| 2328 |
* Producer: REO |
| 2329 |
* Consumer: SW |
| 2330 |
* |
| 2331 |
* status_hdr |
| 2332 |
* Details that can link this status with the original command. It |
| 2333 |
* also contains info on how long REO took to execute this command. |
| 2334 |
* |
| 2335 |
* error_detected |
| 2336 |
* Status for blocking resource handling |
| 2337 |
* |
| 2338 |
* 0 - No error has been detected while executing this command |
| 2339 |
* 1 - An error in the blocking resource management was detected |
| 2340 |
* |
| 2341 |
* block_error_details |
| 2342 |
* only valid when error_detected is set |
| 2343 |
* |
| 2344 |
* 0 - No blocking related errors found |
| 2345 |
* 1 - Blocking resource is already in use |
| 2346 |
* 2 - Resource requested to be unblocked, was not blocked |
| 2347 |
* |
| 2348 |
* cache_controller_flush_status_hit |
| 2349 |
* The status that the cache controller returned on executing the |
| 2350 |
* flush command. |
| 2351 |
* |
| 2352 |
* 0 - miss; 1 - hit |
| 2353 |
* |
| 2354 |
* cache_controller_flush_status_desc_type |
| 2355 |
* Flush descriptor type |
| 2356 |
* |
| 2357 |
* cache_controller_flush_status_client_id |
| 2358 |
* Module who made the flush request |
| 2359 |
* |
| 2360 |
* In REO, this is always 0 |
| 2361 |
* |
| 2362 |
* cache_controller_flush_status_error |
| 2363 |
* Error condition |
| 2364 |
* |
| 2365 |
* 0 - No error found |
| 2366 |
* 1 - HW interface is still busy |
| 2367 |
* 2 - Line currently locked. Used for one line flush command |
| 2368 |
* 3 - At least one line is still locked. |
| 2369 |
* Used for cache flush command. |
| 2370 |
* |
| 2371 |
* cache_controller_flush_count |
| 2372 |
* The number of lines that were actually flushed out |
| 2373 |
* |
| 2374 |
* looping_count |
| 2375 |
* A count value that indicates the number of times the producer of |
| 2376 |
* entries into this Ring has looped around the ring. |
| 2377 |
*/ |
| 2378 |
|
| 2379 |
#define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR BIT(0) |
| 2380 |
#define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE BIT(1) |
| 2381 |
|
| 2382 |
struct hal_reo_unblock_cache_status { |
| 2383 |
struct hal_reo_status_hdr hdr; |
| 2384 |
u32 info0; |
| 2385 |
u32 rsvd0[21]; |
| 2386 |
u32 info1; |
| 2387 |
} __packed; |
| 2388 |
|
| 2389 |
/* hal_reo_unblock_cache_status |
| 2390 |
* Producer: REO |
| 2391 |
* Consumer: SW |
| 2392 |
* |
| 2393 |
* status_hdr |
| 2394 |
* Details that can link this status with the original command. It |
| 2395 |
* also contains info on how long REO took to execute this command. |
| 2396 |
* |
| 2397 |
* error_detected |
| 2398 |
* 0 - No error has been detected while executing this command |
| 2399 |
* 1 - The blocking resource was not in use, and therefore it could |
| 2400 |
* not be unblocked. |
| 2401 |
* |
| 2402 |
* unblock_type |
| 2403 |
* Reference to the type of unblock command |
| 2404 |
* 0 - Unblock a blocking resource |
| 2405 |
* 1 - The entire cache usage is unblock |
| 2406 |
* |
| 2407 |
* looping_count |
| 2408 |
* A count value that indicates the number of times the producer of |
| 2409 |
* entries into this Ring has looped around the ring. |
| 2410 |
*/ |
| 2411 |
|
| 2412 |
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR BIT(0) |
| 2413 |
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY BIT(1) |
| 2414 |
|
| 2415 |
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT GENMASK(15, 0) |
| 2416 |
#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT GENMASK(31, 16) |
| 2417 |
|
| 2418 |
struct hal_reo_flush_timeout_list_status { |
| 2419 |
struct hal_reo_status_hdr hdr; |
| 2420 |
u32 info0; |
| 2421 |
u32 info1; |
| 2422 |
u32 rsvd0[20]; |
| 2423 |
u32 info2; |
| 2424 |
} __packed; |
| 2425 |
|
| 2426 |
/* hal_reo_flush_timeout_list_status |
| 2427 |
* Producer: REO |
| 2428 |
* Consumer: SW |
| 2429 |
* |
| 2430 |
* status_hdr |
| 2431 |
* Details that can link this status with the original command. It |
| 2432 |
* also contains info on how long REO took to execute this command. |
| 2433 |
* |
| 2434 |
* error_detected |
| 2435 |
* 0 - No error has been detected while executing this command |
| 2436 |
* 1 - Command not properly executed and returned with error |
| 2437 |
* |
| 2438 |
* timeout_list_empty |
| 2439 |
* When set, REO has depleted the timeout list and all entries are |
| 2440 |
* gone. |
| 2441 |
* |
| 2442 |
* release_desc_count |
| 2443 |
* Producer: SW; Consumer: REO |
| 2444 |
* The number of link descriptor released |
| 2445 |
* |
| 2446 |
* forward_buf_count |
| 2447 |
* Producer: SW; Consumer: REO |
| 2448 |
* The number of buffers forwarded to the REO destination rings |
| 2449 |
* |
| 2450 |
* looping_count |
| 2451 |
* A count value that indicates the number of times the producer of |
| 2452 |
* entries into this Ring has looped around the ring. |
| 2453 |
*/ |
| 2454 |
|
| 2455 |
#define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX GENMASK(1, 0) |
| 2456 |
#define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0 GENMASK(23, 0) |
| 2457 |
#define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1 GENMASK(23, 0) |
| 2458 |
#define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2 GENMASK(23, 0) |
| 2459 |
#define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(25, 0) |
| 2460 |
|
| 2461 |
struct hal_reo_desc_thresh_reached_status { |
| 2462 |
struct hal_reo_status_hdr hdr; |
| 2463 |
u32 info0; |
| 2464 |
u32 info1; |
| 2465 |
u32 info2; |
| 2466 |
u32 info3; |
| 2467 |
u32 info4; |
| 2468 |
u32 rsvd0[17]; |
| 2469 |
u32 info5; |
| 2470 |
} __packed; |
| 2471 |
|
| 2472 |
/* hal_reo_desc_thresh_reached_status |
| 2473 |
* Producer: REO |
| 2474 |
* Consumer: SW |
| 2475 |
* |
| 2476 |
* status_hdr |
| 2477 |
* Details that can link this status with the original command. It |
| 2478 |
* also contains info on how long REO took to execute this command. |
| 2479 |
* |
| 2480 |
* threshold_index |
| 2481 |
* The index of the threshold register whose value got reached |
| 2482 |
* |
| 2483 |
* link_descriptor_counter0 |
| 2484 |
* link_descriptor_counter1 |
| 2485 |
* link_descriptor_counter2 |
| 2486 |
* link_descriptor_counter_sum |
| 2487 |
* Value of the respective counters at generation of this message |
| 2488 |
* |
| 2489 |
* looping_count |
| 2490 |
* A count value that indicates the number of times the producer of |
| 2491 |
* entries into this Ring has looped around the ring. |
| 2492 |
*/ |
| 2493 |
|
| 2494 |
#endif /* ATH11K_HAL_DESC_H */ |