| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| 4 |
* Copyright (C) 2018-2024 Linaro Ltd. |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <linux/bits.h> |
| 8 |
#include <linux/bug.h> |
| 9 |
#include <linux/completion.h> |
| 10 |
#include <linux/interrupt.h> |
| 11 |
#include <linux/mutex.h> |
| 12 |
#include <linux/netdevice.h> |
| 13 |
#include <linux/platform_device.h> |
| 14 |
#include <linux/types.h> |
| 15 |
|
| 16 |
#include "gsi.h" |
| 17 |
#include "gsi_private.h" |
| 18 |
#include "gsi_reg.h" |
| 19 |
#include "gsi_trans.h" |
| 20 |
#include "ipa_data.h" |
| 21 |
#include "ipa_gsi.h" |
| 22 |
#include "ipa_version.h" |
| 23 |
#include "reg.h" |
| 24 |
|
| 25 |
/** |
| 26 |
* DOC: The IPA Generic Software Interface |
| 27 |
* |
| 28 |
* The generic software interface (GSI) is an integral component of the IPA, |
| 29 |
* providing a well-defined communication layer between the AP subsystem |
| 30 |
* and the IPA core. The modem uses the GSI layer as well. |
| 31 |
* |
| 32 |
* -------- --------- |
| 33 |
* | | | | |
| 34 |
* | AP +<---. .----+ Modem | |
| 35 |
* | +--. | | .->+ | |
| 36 |
* | | | | | | | | |
| 37 |
* -------- | | | | --------- |
| 38 |
* v | v | |
| 39 |
* --+-+---+-+-- |
| 40 |
* | GSI | |
| 41 |
* |-----------| |
| 42 |
* | | |
| 43 |
* | IPA | |
| 44 |
* | | |
| 45 |
* ------------- |
| 46 |
* |
| 47 |
* In the above diagram, the AP and Modem represent "execution environments" |
| 48 |
* (EEs), which are independent operating environments that use the IPA for |
| 49 |
* data transfer. |
| 50 |
* |
| 51 |
* Each EE uses a set of unidirectional GSI "channels," which allow transfer |
| 52 |
* of data to or from the IPA. A channel is implemented as a ring buffer, |
| 53 |
* with a DRAM-resident array of "transfer elements" (TREs) available to |
| 54 |
* describe transfers to or from other EEs through the IPA. A transfer |
| 55 |
* element can also contain an immediate command, requesting the IPA perform |
| 56 |
* actions other than data transfer. |
| 57 |
* |
| 58 |
* Each TRE refers to a block of data--also located in DRAM. After writing |
| 59 |
* one or more TREs to a channel, the writer (either the IPA or an EE) writes |
| 60 |
* a doorbell register to inform the receiving side how many elements have |
| 61 |
* been written. |
| 62 |
* |
| 63 |
* Each channel has a GSI "event ring" associated with it. An event ring |
| 64 |
* is implemented very much like a channel ring, but is always directed from |
| 65 |
* the IPA to an EE. The IPA notifies an EE (such as the AP) about channel |
| 66 |
* events by adding an entry to the event ring associated with the channel. |
| 67 |
* The GSI then writes its doorbell for the event ring, causing the target |
| 68 |
* EE to be interrupted. Each entry in an event ring contains a pointer |
| 69 |
* to the channel TRE whose completion the event represents. |
| 70 |
* |
| 71 |
* Each TRE in a channel ring has a set of flags. One flag indicates whether |
| 72 |
* the completion of the transfer operation generates an entry (and possibly |
| 73 |
* an interrupt) in the channel's event ring. Other flags allow transfer |
| 74 |
* elements to be chained together, forming a single logical transaction. |
| 75 |
* TRE flags are used to control whether and when interrupts are generated |
| 76 |
* to signal completion of channel transfers. |
| 77 |
* |
| 78 |
* Elements in channel and event rings are completed (or consumed) strictly |
| 79 |
* in order. Completion of one entry implies the completion of all preceding |
| 80 |
* entries. A single completion interrupt can therefore communicate the |
| 81 |
* completion of many transfers. |
| 82 |
* |
| 83 |
* Note that all GSI registers are little-endian, which is the assumed |
| 84 |
* endianness of I/O space accesses. The accessor functions perform byte |
| 85 |
* swapping if needed (i.e., for a big endian CPU). |
| 86 |
*/ |
| 87 |
|
| 88 |
/* Delay period for interrupt moderation (in 32KHz IPA internal timer ticks) */ |
| 89 |
#define GSI_EVT_RING_INT_MODT (32 * 1) /* 1ms under 32KHz clock */ |
| 90 |
|
| 91 |
#define GSI_CMD_TIMEOUT 50 /* milliseconds */ |
| 92 |
|
| 93 |
#define GSI_CHANNEL_STOP_RETRIES 10 |
| 94 |
#define GSI_CHANNEL_MODEM_HALT_RETRIES 10 |
| 95 |
#define GSI_CHANNEL_MODEM_FLOW_RETRIES 5 /* disable flow control only */ |
| 96 |
|
| 97 |
#define GSI_MHI_EVENT_ID_START 10 /* 1st reserved event id */ |
| 98 |
#define GSI_MHI_EVENT_ID_END 16 /* Last reserved event id */ |
| 99 |
|
| 100 |
#define GSI_ISR_MAX_ITER 50 /* Detect interrupt storms */ |
| 101 |
|
| 102 |
/* An entry in an event ring */ |
| 103 |
struct gsi_event { |
| 104 |
__le64 xfer_ptr; |
| 105 |
__le16 len; |
| 106 |
u8 reserved1; |
| 107 |
u8 code; |
| 108 |
__le16 reserved2; |
| 109 |
u8 type; |
| 110 |
u8 chid; |
| 111 |
}; |
| 112 |
|
| 113 |
/** gsi_channel_scratch_gpi - GPI protocol scratch register |
| 114 |
* @max_outstanding_tre: |
| 115 |
* Defines the maximum number of TREs allowed in a single transaction |
| 116 |
* on a channel (in bytes). This determines the amount of prefetch |
| 117 |
* performed by the hardware. We configure this to equal the size of |
| 118 |
* the TLV FIFO for the channel. |
| 119 |
* @outstanding_threshold: |
| 120 |
* Defines the threshold (in bytes) determining when the sequencer |
| 121 |
* should update the channel doorbell. We configure this to equal |
| 122 |
* the size of two TREs. |
| 123 |
*/ |
| 124 |
struct gsi_channel_scratch_gpi { |
| 125 |
u64 reserved1; |
| 126 |
u16 reserved2; |
| 127 |
u16 max_outstanding_tre; |
| 128 |
u16 reserved3; |
| 129 |
u16 outstanding_threshold; |
| 130 |
}; |
| 131 |
|
| 132 |
/** gsi_channel_scratch - channel scratch configuration area |
| 133 |
* |
| 134 |
* The exact interpretation of this register is protocol-specific. |
| 135 |
* We only use GPI channels; see struct gsi_channel_scratch_gpi, above. |
| 136 |
*/ |
| 137 |
union gsi_channel_scratch { |
| 138 |
struct gsi_channel_scratch_gpi gpi; |
| 139 |
struct { |
| 140 |
u32 word1; |
| 141 |
u32 word2; |
| 142 |
u32 word3; |
| 143 |
u32 word4; |
| 144 |
} data; |
| 145 |
}; |
| 146 |
|
| 147 |
/* Check things that can be validated at build time. */ |
| 148 |
static void gsi_validate_build(void) |
| 149 |
{ |
| 150 |
/* This is used as a divisor */ |
| 151 |
BUILD_BUG_ON(!GSI_RING_ELEMENT_SIZE); |
| 152 |
|
| 153 |
/* Code assumes the size of channel and event ring element are |
| 154 |
* the same (and fixed). Make sure the size of an event ring |
| 155 |
* element is what's expected. |
| 156 |
*/ |
| 157 |
BUILD_BUG_ON(sizeof(struct gsi_event) != GSI_RING_ELEMENT_SIZE); |
| 158 |
|
| 159 |
/* Hardware requires a 2^n ring size. We ensure the number of |
| 160 |
* elements in an event ring is a power of 2 elsewhere; this |
| 161 |
* ensure the elements themselves meet the requirement. |
| 162 |
*/ |
| 163 |
BUILD_BUG_ON(!is_power_of_2(GSI_RING_ELEMENT_SIZE)); |
| 164 |
} |
| 165 |
|
| 166 |
/* Return the channel id associated with a given channel */ |
| 167 |
static u32 gsi_channel_id(struct gsi_channel *channel) |
| 168 |
{ |
| 169 |
return channel - &channel->gsi->channel[0]; |
| 170 |
} |
| 171 |
|
| 172 |
/* An initialized channel has a non-null GSI pointer */ |
| 173 |
static bool gsi_channel_initialized(struct gsi_channel *channel) |
| 174 |
{ |
| 175 |
return !!channel->gsi; |
| 176 |
} |
| 177 |
|
| 178 |
/* Encode the channel protocol for the CH_C_CNTXT_0 register */ |
| 179 |
static u32 ch_c_cntxt_0_type_encode(enum ipa_version version, |
| 180 |
const struct reg *reg, |
| 181 |
enum gsi_channel_type type) |
| 182 |
{ |
| 183 |
u32 val; |
| 184 |
|
| 185 |
val = reg_encode(reg, CHTYPE_PROTOCOL, type); |
| 186 |
if (version < IPA_VERSION_4_5 || version >= IPA_VERSION_5_0) |
| 187 |
return val; |
| 188 |
|
| 189 |
type >>= hweight32(reg_fmask(reg, CHTYPE_PROTOCOL)); |
| 190 |
|
| 191 |
return val | reg_encode(reg, CHTYPE_PROTOCOL_MSB, type); |
| 192 |
} |
| 193 |
|
| 194 |
/* Update the GSI IRQ type register with the cached value */ |
| 195 |
static void gsi_irq_type_update(struct gsi *gsi, u32 val) |
| 196 |
{ |
| 197 |
const struct reg *reg = gsi_reg(gsi, CNTXT_TYPE_IRQ_MSK); |
| 198 |
|
| 199 |
gsi->type_enabled_bitmap = val; |
| 200 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 201 |
} |
| 202 |
|
| 203 |
static void gsi_irq_type_enable(struct gsi *gsi, enum gsi_irq_type_id type_id) |
| 204 |
{ |
| 205 |
gsi_irq_type_update(gsi, gsi->type_enabled_bitmap | type_id); |
| 206 |
} |
| 207 |
|
| 208 |
static void gsi_irq_type_disable(struct gsi *gsi, enum gsi_irq_type_id type_id) |
| 209 |
{ |
| 210 |
gsi_irq_type_update(gsi, gsi->type_enabled_bitmap & ~type_id); |
| 211 |
} |
| 212 |
|
| 213 |
/* Event ring commands are performed one at a time. Their completion |
| 214 |
* is signaled by the event ring control GSI interrupt type, which is |
| 215 |
* only enabled when we issue an event ring command. Only the event |
| 216 |
* ring being operated on has this interrupt enabled. |
| 217 |
*/ |
| 218 |
static void gsi_irq_ev_ctrl_enable(struct gsi *gsi, u32 evt_ring_id) |
| 219 |
{ |
| 220 |
u32 val = BIT(evt_ring_id); |
| 221 |
const struct reg *reg; |
| 222 |
|
| 223 |
/* There's a small chance that a previous command completed |
| 224 |
* after the interrupt was disabled, so make sure we have no |
| 225 |
* pending interrupts before we enable them. |
| 226 |
*/ |
| 227 |
reg = gsi_reg(gsi, CNTXT_SRC_EV_CH_IRQ_CLR); |
| 228 |
iowrite32(~0, gsi->virt + reg_offset(reg)); |
| 229 |
|
| 230 |
reg = gsi_reg(gsi, CNTXT_SRC_EV_CH_IRQ_MSK); |
| 231 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 232 |
gsi_irq_type_enable(gsi, GSI_EV_CTRL); |
| 233 |
} |
| 234 |
|
| 235 |
/* Disable event ring control interrupts */ |
| 236 |
static void gsi_irq_ev_ctrl_disable(struct gsi *gsi) |
| 237 |
{ |
| 238 |
const struct reg *reg; |
| 239 |
|
| 240 |
gsi_irq_type_disable(gsi, GSI_EV_CTRL); |
| 241 |
|
| 242 |
reg = gsi_reg(gsi, CNTXT_SRC_EV_CH_IRQ_MSK); |
| 243 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 244 |
} |
| 245 |
|
| 246 |
/* Channel commands are performed one at a time. Their completion is |
| 247 |
* signaled by the channel control GSI interrupt type, which is only |
| 248 |
* enabled when we issue a channel command. Only the channel being |
| 249 |
* operated on has this interrupt enabled. |
| 250 |
*/ |
| 251 |
static void gsi_irq_ch_ctrl_enable(struct gsi *gsi, u32 channel_id) |
| 252 |
{ |
| 253 |
u32 val = BIT(channel_id); |
| 254 |
const struct reg *reg; |
| 255 |
|
| 256 |
/* There's a small chance that a previous command completed |
| 257 |
* after the interrupt was disabled, so make sure we have no |
| 258 |
* pending interrupts before we enable them. |
| 259 |
*/ |
| 260 |
reg = gsi_reg(gsi, CNTXT_SRC_CH_IRQ_CLR); |
| 261 |
iowrite32(~0, gsi->virt + reg_offset(reg)); |
| 262 |
|
| 263 |
reg = gsi_reg(gsi, CNTXT_SRC_CH_IRQ_MSK); |
| 264 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 265 |
|
| 266 |
gsi_irq_type_enable(gsi, GSI_CH_CTRL); |
| 267 |
} |
| 268 |
|
| 269 |
/* Disable channel control interrupts */ |
| 270 |
static void gsi_irq_ch_ctrl_disable(struct gsi *gsi) |
| 271 |
{ |
| 272 |
const struct reg *reg; |
| 273 |
|
| 274 |
gsi_irq_type_disable(gsi, GSI_CH_CTRL); |
| 275 |
|
| 276 |
reg = gsi_reg(gsi, CNTXT_SRC_CH_IRQ_MSK); |
| 277 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 278 |
} |
| 279 |
|
| 280 |
static void gsi_irq_ieob_enable_one(struct gsi *gsi, u32 evt_ring_id) |
| 281 |
{ |
| 282 |
bool enable_ieob = !gsi->ieob_enabled_bitmap; |
| 283 |
const struct reg *reg; |
| 284 |
u32 val; |
| 285 |
|
| 286 |
gsi->ieob_enabled_bitmap |= BIT(evt_ring_id); |
| 287 |
|
| 288 |
reg = gsi_reg(gsi, CNTXT_SRC_IEOB_IRQ_MSK); |
| 289 |
val = gsi->ieob_enabled_bitmap; |
| 290 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 291 |
|
| 292 |
/* Enable the interrupt type if this is the first channel enabled */ |
| 293 |
if (enable_ieob) |
| 294 |
gsi_irq_type_enable(gsi, GSI_IEOB); |
| 295 |
} |
| 296 |
|
| 297 |
static void gsi_irq_ieob_disable(struct gsi *gsi, u32 event_mask) |
| 298 |
{ |
| 299 |
const struct reg *reg; |
| 300 |
u32 val; |
| 301 |
|
| 302 |
gsi->ieob_enabled_bitmap &= ~event_mask; |
| 303 |
|
| 304 |
/* Disable the interrupt type if this was the last enabled channel */ |
| 305 |
if (!gsi->ieob_enabled_bitmap) |
| 306 |
gsi_irq_type_disable(gsi, GSI_IEOB); |
| 307 |
|
| 308 |
reg = gsi_reg(gsi, CNTXT_SRC_IEOB_IRQ_MSK); |
| 309 |
val = gsi->ieob_enabled_bitmap; |
| 310 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 311 |
} |
| 312 |
|
| 313 |
static void gsi_irq_ieob_disable_one(struct gsi *gsi, u32 evt_ring_id) |
| 314 |
{ |
| 315 |
gsi_irq_ieob_disable(gsi, BIT(evt_ring_id)); |
| 316 |
} |
| 317 |
|
| 318 |
/* Enable all GSI_interrupt types */ |
| 319 |
static void gsi_irq_enable(struct gsi *gsi) |
| 320 |
{ |
| 321 |
const struct reg *reg; |
| 322 |
u32 val; |
| 323 |
|
| 324 |
/* Global interrupts include hardware error reports. Enable |
| 325 |
* that so we can at least report the error should it occur. |
| 326 |
*/ |
| 327 |
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_EN); |
| 328 |
iowrite32(ERROR_INT, gsi->virt + reg_offset(reg)); |
| 329 |
|
| 330 |
gsi_irq_type_update(gsi, gsi->type_enabled_bitmap | GSI_GLOB_EE); |
| 331 |
|
| 332 |
/* General GSI interrupts are reported to all EEs; if they occur |
| 333 |
* they are unrecoverable (without reset). A breakpoint interrupt |
| 334 |
* also exists, but we don't support that. We want to be notified |
| 335 |
* of errors so we can report them, even if they can't be handled. |
| 336 |
*/ |
| 337 |
reg = gsi_reg(gsi, CNTXT_GSI_IRQ_EN); |
| 338 |
val = BUS_ERROR; |
| 339 |
val |= CMD_FIFO_OVRFLOW; |
| 340 |
val |= MCS_STACK_OVRFLOW; |
| 341 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 342 |
|
| 343 |
gsi_irq_type_update(gsi, gsi->type_enabled_bitmap | GSI_GENERAL); |
| 344 |
} |
| 345 |
|
| 346 |
/* Disable all GSI interrupt types */ |
| 347 |
static void gsi_irq_disable(struct gsi *gsi) |
| 348 |
{ |
| 349 |
const struct reg *reg; |
| 350 |
|
| 351 |
gsi_irq_type_update(gsi, 0); |
| 352 |
|
| 353 |
/* Clear the type-specific interrupt masks set by gsi_irq_enable() */ |
| 354 |
reg = gsi_reg(gsi, CNTXT_GSI_IRQ_EN); |
| 355 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 356 |
|
| 357 |
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_EN); |
| 358 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 359 |
} |
| 360 |
|
| 361 |
/* Return the virtual address associated with a ring index */ |
| 362 |
void *gsi_ring_virt(struct gsi_ring *ring, u32 index) |
| 363 |
{ |
| 364 |
/* Note: index *must* be used modulo the ring count here */ |
| 365 |
return ring->virt + (index % ring->count) * GSI_RING_ELEMENT_SIZE; |
| 366 |
} |
| 367 |
|
| 368 |
/* Return the 32-bit DMA address associated with a ring index */ |
| 369 |
static u32 gsi_ring_addr(struct gsi_ring *ring, u32 index) |
| 370 |
{ |
| 371 |
return lower_32_bits(ring->addr) + index * GSI_RING_ELEMENT_SIZE; |
| 372 |
} |
| 373 |
|
| 374 |
/* Return the ring index of a 32-bit ring offset */ |
| 375 |
static u32 gsi_ring_index(struct gsi_ring *ring, u32 offset) |
| 376 |
{ |
| 377 |
return (offset - gsi_ring_addr(ring, 0)) / GSI_RING_ELEMENT_SIZE; |
| 378 |
} |
| 379 |
|
| 380 |
/* Issue a GSI command by writing a value to a register, then wait for |
| 381 |
* completion to be signaled. Returns true if the command completes |
| 382 |
* or false if it times out. |
| 383 |
*/ |
| 384 |
static bool gsi_command(struct gsi *gsi, u32 reg, u32 val) |
| 385 |
{ |
| 386 |
unsigned long timeout = msecs_to_jiffies(GSI_CMD_TIMEOUT); |
| 387 |
struct completion *completion = &gsi->completion; |
| 388 |
|
| 389 |
reinit_completion(completion); |
| 390 |
|
| 391 |
iowrite32(val, gsi->virt + reg); |
| 392 |
|
| 393 |
return !!wait_for_completion_timeout(completion, timeout); |
| 394 |
} |
| 395 |
|
| 396 |
/* Return the hardware's notion of the current state of an event ring */ |
| 397 |
static enum gsi_evt_ring_state |
| 398 |
gsi_evt_ring_state(struct gsi *gsi, u32 evt_ring_id) |
| 399 |
{ |
| 400 |
const struct reg *reg = gsi_reg(gsi, EV_CH_E_CNTXT_0); |
| 401 |
u32 val; |
| 402 |
|
| 403 |
val = ioread32(gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 404 |
|
| 405 |
return reg_decode(reg, EV_CHSTATE, val); |
| 406 |
} |
| 407 |
|
| 408 |
/* Issue an event ring command and wait for it to complete */ |
| 409 |
static void gsi_evt_ring_command(struct gsi *gsi, u32 evt_ring_id, |
| 410 |
enum gsi_evt_cmd_opcode opcode) |
| 411 |
{ |
| 412 |
struct device *dev = gsi->dev; |
| 413 |
const struct reg *reg; |
| 414 |
bool timeout; |
| 415 |
u32 val; |
| 416 |
|
| 417 |
/* Enable the completion interrupt for the command */ |
| 418 |
gsi_irq_ev_ctrl_enable(gsi, evt_ring_id); |
| 419 |
|
| 420 |
reg = gsi_reg(gsi, EV_CH_CMD); |
| 421 |
val = reg_encode(reg, EV_CHID, evt_ring_id); |
| 422 |
val |= reg_encode(reg, EV_OPCODE, opcode); |
| 423 |
|
| 424 |
timeout = !gsi_command(gsi, reg_offset(reg), val); |
| 425 |
|
| 426 |
gsi_irq_ev_ctrl_disable(gsi); |
| 427 |
|
| 428 |
if (!timeout) |
| 429 |
return; |
| 430 |
|
| 431 |
dev_err(dev, "GSI command %u for event ring %u timed out, state %u\n", |
| 432 |
opcode, evt_ring_id, gsi_evt_ring_state(gsi, evt_ring_id)); |
| 433 |
} |
| 434 |
|
| 435 |
/* Allocate an event ring in NOT_ALLOCATED state */ |
| 436 |
static int gsi_evt_ring_alloc_command(struct gsi *gsi, u32 evt_ring_id) |
| 437 |
{ |
| 438 |
enum gsi_evt_ring_state state; |
| 439 |
|
| 440 |
/* Get initial event ring state */ |
| 441 |
state = gsi_evt_ring_state(gsi, evt_ring_id); |
| 442 |
if (state != GSI_EVT_RING_STATE_NOT_ALLOCATED) { |
| 443 |
dev_err(gsi->dev, "event ring %u bad state %u before alloc\n", |
| 444 |
evt_ring_id, state); |
| 445 |
return -EINVAL; |
| 446 |
} |
| 447 |
|
| 448 |
gsi_evt_ring_command(gsi, evt_ring_id, GSI_EVT_ALLOCATE); |
| 449 |
|
| 450 |
/* If successful the event ring state will have changed */ |
| 451 |
state = gsi_evt_ring_state(gsi, evt_ring_id); |
| 452 |
if (state == GSI_EVT_RING_STATE_ALLOCATED) |
| 453 |
return 0; |
| 454 |
|
| 455 |
dev_err(gsi->dev, "event ring %u bad state %u after alloc\n", |
| 456 |
evt_ring_id, state); |
| 457 |
|
| 458 |
return -EIO; |
| 459 |
} |
| 460 |
|
| 461 |
/* Reset a GSI event ring in ALLOCATED or ERROR state. */ |
| 462 |
static void gsi_evt_ring_reset_command(struct gsi *gsi, u32 evt_ring_id) |
| 463 |
{ |
| 464 |
enum gsi_evt_ring_state state; |
| 465 |
|
| 466 |
state = gsi_evt_ring_state(gsi, evt_ring_id); |
| 467 |
if (state != GSI_EVT_RING_STATE_ALLOCATED && |
| 468 |
state != GSI_EVT_RING_STATE_ERROR) { |
| 469 |
dev_err(gsi->dev, "event ring %u bad state %u before reset\n", |
| 470 |
evt_ring_id, state); |
| 471 |
return; |
| 472 |
} |
| 473 |
|
| 474 |
gsi_evt_ring_command(gsi, evt_ring_id, GSI_EVT_RESET); |
| 475 |
|
| 476 |
/* If successful the event ring state will have changed */ |
| 477 |
state = gsi_evt_ring_state(gsi, evt_ring_id); |
| 478 |
if (state == GSI_EVT_RING_STATE_ALLOCATED) |
| 479 |
return; |
| 480 |
|
| 481 |
dev_err(gsi->dev, "event ring %u bad state %u after reset\n", |
| 482 |
evt_ring_id, state); |
| 483 |
} |
| 484 |
|
| 485 |
/* Issue a hardware de-allocation request for an allocated event ring */ |
| 486 |
static void gsi_evt_ring_de_alloc_command(struct gsi *gsi, u32 evt_ring_id) |
| 487 |
{ |
| 488 |
enum gsi_evt_ring_state state; |
| 489 |
|
| 490 |
state = gsi_evt_ring_state(gsi, evt_ring_id); |
| 491 |
if (state != GSI_EVT_RING_STATE_ALLOCATED) { |
| 492 |
dev_err(gsi->dev, "event ring %u state %u before dealloc\n", |
| 493 |
evt_ring_id, state); |
| 494 |
return; |
| 495 |
} |
| 496 |
|
| 497 |
gsi_evt_ring_command(gsi, evt_ring_id, GSI_EVT_DE_ALLOC); |
| 498 |
|
| 499 |
/* If successful the event ring state will have changed */ |
| 500 |
state = gsi_evt_ring_state(gsi, evt_ring_id); |
| 501 |
if (state == GSI_EVT_RING_STATE_NOT_ALLOCATED) |
| 502 |
return; |
| 503 |
|
| 504 |
dev_err(gsi->dev, "event ring %u bad state %u after dealloc\n", |
| 505 |
evt_ring_id, state); |
| 506 |
} |
| 507 |
|
| 508 |
/* Fetch the current state of a channel from hardware */ |
| 509 |
static enum gsi_channel_state gsi_channel_state(struct gsi_channel *channel) |
| 510 |
{ |
| 511 |
const struct reg *reg = gsi_reg(channel->gsi, CH_C_CNTXT_0); |
| 512 |
u32 channel_id = gsi_channel_id(channel); |
| 513 |
struct gsi *gsi = channel->gsi; |
| 514 |
void __iomem *virt = gsi->virt; |
| 515 |
u32 val; |
| 516 |
|
| 517 |
reg = gsi_reg(gsi, CH_C_CNTXT_0); |
| 518 |
val = ioread32(virt + reg_n_offset(reg, channel_id)); |
| 519 |
|
| 520 |
return reg_decode(reg, CHSTATE, val); |
| 521 |
} |
| 522 |
|
| 523 |
/* Issue a channel command and wait for it to complete */ |
| 524 |
static void |
| 525 |
gsi_channel_command(struct gsi_channel *channel, enum gsi_ch_cmd_opcode opcode) |
| 526 |
{ |
| 527 |
u32 channel_id = gsi_channel_id(channel); |
| 528 |
struct gsi *gsi = channel->gsi; |
| 529 |
struct device *dev = gsi->dev; |
| 530 |
const struct reg *reg; |
| 531 |
bool timeout; |
| 532 |
u32 val; |
| 533 |
|
| 534 |
/* Enable the completion interrupt for the command */ |
| 535 |
gsi_irq_ch_ctrl_enable(gsi, channel_id); |
| 536 |
|
| 537 |
reg = gsi_reg(gsi, CH_CMD); |
| 538 |
val = reg_encode(reg, CH_CHID, channel_id); |
| 539 |
val |= reg_encode(reg, CH_OPCODE, opcode); |
| 540 |
|
| 541 |
timeout = !gsi_command(gsi, reg_offset(reg), val); |
| 542 |
|
| 543 |
gsi_irq_ch_ctrl_disable(gsi); |
| 544 |
|
| 545 |
if (!timeout) |
| 546 |
return; |
| 547 |
|
| 548 |
dev_err(dev, "GSI command %u for channel %u timed out, state %u\n", |
| 549 |
opcode, channel_id, gsi_channel_state(channel)); |
| 550 |
} |
| 551 |
|
| 552 |
/* Allocate GSI channel in NOT_ALLOCATED state */ |
| 553 |
static int gsi_channel_alloc_command(struct gsi *gsi, u32 channel_id) |
| 554 |
{ |
| 555 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 556 |
struct device *dev = gsi->dev; |
| 557 |
enum gsi_channel_state state; |
| 558 |
|
| 559 |
/* Get initial channel state */ |
| 560 |
state = gsi_channel_state(channel); |
| 561 |
if (state != GSI_CHANNEL_STATE_NOT_ALLOCATED) { |
| 562 |
dev_err(dev, "channel %u bad state %u before alloc\n", |
| 563 |
channel_id, state); |
| 564 |
return -EINVAL; |
| 565 |
} |
| 566 |
|
| 567 |
gsi_channel_command(channel, GSI_CH_ALLOCATE); |
| 568 |
|
| 569 |
/* If successful the channel state will have changed */ |
| 570 |
state = gsi_channel_state(channel); |
| 571 |
if (state == GSI_CHANNEL_STATE_ALLOCATED) |
| 572 |
return 0; |
| 573 |
|
| 574 |
dev_err(dev, "channel %u bad state %u after alloc\n", |
| 575 |
channel_id, state); |
| 576 |
|
| 577 |
return -EIO; |
| 578 |
} |
| 579 |
|
| 580 |
/* Start an ALLOCATED channel */ |
| 581 |
static int gsi_channel_start_command(struct gsi_channel *channel) |
| 582 |
{ |
| 583 |
struct device *dev = channel->gsi->dev; |
| 584 |
enum gsi_channel_state state; |
| 585 |
|
| 586 |
state = gsi_channel_state(channel); |
| 587 |
if (state != GSI_CHANNEL_STATE_ALLOCATED && |
| 588 |
state != GSI_CHANNEL_STATE_STOPPED) { |
| 589 |
dev_err(dev, "channel %u bad state %u before start\n", |
| 590 |
gsi_channel_id(channel), state); |
| 591 |
return -EINVAL; |
| 592 |
} |
| 593 |
|
| 594 |
gsi_channel_command(channel, GSI_CH_START); |
| 595 |
|
| 596 |
/* If successful the channel state will have changed */ |
| 597 |
state = gsi_channel_state(channel); |
| 598 |
if (state == GSI_CHANNEL_STATE_STARTED) |
| 599 |
return 0; |
| 600 |
|
| 601 |
dev_err(dev, "channel %u bad state %u after start\n", |
| 602 |
gsi_channel_id(channel), state); |
| 603 |
|
| 604 |
return -EIO; |
| 605 |
} |
| 606 |
|
| 607 |
/* Stop a GSI channel in STARTED state */ |
| 608 |
static int gsi_channel_stop_command(struct gsi_channel *channel) |
| 609 |
{ |
| 610 |
struct device *dev = channel->gsi->dev; |
| 611 |
enum gsi_channel_state state; |
| 612 |
|
| 613 |
state = gsi_channel_state(channel); |
| 614 |
|
| 615 |
/* Channel could have entered STOPPED state since last call |
| 616 |
* if it timed out. If so, we're done. |
| 617 |
*/ |
| 618 |
if (state == GSI_CHANNEL_STATE_STOPPED) |
| 619 |
return 0; |
| 620 |
|
| 621 |
if (state != GSI_CHANNEL_STATE_STARTED && |
| 622 |
state != GSI_CHANNEL_STATE_STOP_IN_PROC) { |
| 623 |
dev_err(dev, "channel %u bad state %u before stop\n", |
| 624 |
gsi_channel_id(channel), state); |
| 625 |
return -EINVAL; |
| 626 |
} |
| 627 |
|
| 628 |
gsi_channel_command(channel, GSI_CH_STOP); |
| 629 |
|
| 630 |
/* If successful the channel state will have changed */ |
| 631 |
state = gsi_channel_state(channel); |
| 632 |
if (state == GSI_CHANNEL_STATE_STOPPED) |
| 633 |
return 0; |
| 634 |
|
| 635 |
/* We may have to try again if stop is in progress */ |
| 636 |
if (state == GSI_CHANNEL_STATE_STOP_IN_PROC) |
| 637 |
return -EAGAIN; |
| 638 |
|
| 639 |
dev_err(dev, "channel %u bad state %u after stop\n", |
| 640 |
gsi_channel_id(channel), state); |
| 641 |
|
| 642 |
return -EIO; |
| 643 |
} |
| 644 |
|
| 645 |
/* Reset a GSI channel in ALLOCATED or ERROR state. */ |
| 646 |
static void gsi_channel_reset_command(struct gsi_channel *channel) |
| 647 |
{ |
| 648 |
struct device *dev = channel->gsi->dev; |
| 649 |
enum gsi_channel_state state; |
| 650 |
|
| 651 |
/* A short delay is required before a RESET command */ |
| 652 |
usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC); |
| 653 |
|
| 654 |
state = gsi_channel_state(channel); |
| 655 |
if (state != GSI_CHANNEL_STATE_STOPPED && |
| 656 |
state != GSI_CHANNEL_STATE_ERROR) { |
| 657 |
/* No need to reset a channel already in ALLOCATED state */ |
| 658 |
if (state != GSI_CHANNEL_STATE_ALLOCATED) |
| 659 |
dev_err(dev, "channel %u bad state %u before reset\n", |
| 660 |
gsi_channel_id(channel), state); |
| 661 |
return; |
| 662 |
} |
| 663 |
|
| 664 |
gsi_channel_command(channel, GSI_CH_RESET); |
| 665 |
|
| 666 |
/* If successful the channel state will have changed */ |
| 667 |
state = gsi_channel_state(channel); |
| 668 |
if (state != GSI_CHANNEL_STATE_ALLOCATED) |
| 669 |
dev_err(dev, "channel %u bad state %u after reset\n", |
| 670 |
gsi_channel_id(channel), state); |
| 671 |
} |
| 672 |
|
| 673 |
/* Deallocate an ALLOCATED GSI channel */ |
| 674 |
static void gsi_channel_de_alloc_command(struct gsi *gsi, u32 channel_id) |
| 675 |
{ |
| 676 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 677 |
struct device *dev = gsi->dev; |
| 678 |
enum gsi_channel_state state; |
| 679 |
|
| 680 |
state = gsi_channel_state(channel); |
| 681 |
if (state != GSI_CHANNEL_STATE_ALLOCATED) { |
| 682 |
dev_err(dev, "channel %u bad state %u before dealloc\n", |
| 683 |
channel_id, state); |
| 684 |
return; |
| 685 |
} |
| 686 |
|
| 687 |
gsi_channel_command(channel, GSI_CH_DE_ALLOC); |
| 688 |
|
| 689 |
/* If successful the channel state will have changed */ |
| 690 |
state = gsi_channel_state(channel); |
| 691 |
|
| 692 |
if (state != GSI_CHANNEL_STATE_NOT_ALLOCATED) |
| 693 |
dev_err(dev, "channel %u bad state %u after dealloc\n", |
| 694 |
channel_id, state); |
| 695 |
} |
| 696 |
|
| 697 |
/* Ring an event ring doorbell, reporting the last entry processed by the AP. |
| 698 |
* The index argument (modulo the ring count) is the first unfilled entry, so |
| 699 |
* we supply one less than that with the doorbell. Update the event ring |
| 700 |
* index field with the value provided. |
| 701 |
*/ |
| 702 |
static void gsi_evt_ring_doorbell(struct gsi *gsi, u32 evt_ring_id, u32 index) |
| 703 |
{ |
| 704 |
const struct reg *reg = gsi_reg(gsi, EV_CH_E_DOORBELL_0); |
| 705 |
struct gsi_ring *ring = &gsi->evt_ring[evt_ring_id].ring; |
| 706 |
u32 val; |
| 707 |
|
| 708 |
ring->index = index; /* Next unused entry */ |
| 709 |
|
| 710 |
/* Note: index *must* be used modulo the ring count here */ |
| 711 |
val = gsi_ring_addr(ring, (index - 1) % ring->count); |
| 712 |
iowrite32(val, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 713 |
} |
| 714 |
|
| 715 |
/* Program an event ring for use */ |
| 716 |
static void gsi_evt_ring_program(struct gsi *gsi, u32 evt_ring_id) |
| 717 |
{ |
| 718 |
struct gsi_evt_ring *evt_ring = &gsi->evt_ring[evt_ring_id]; |
| 719 |
struct gsi_ring *ring = &evt_ring->ring; |
| 720 |
const struct reg *reg; |
| 721 |
u32 val; |
| 722 |
|
| 723 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_0); |
| 724 |
/* We program all event rings as GPI type/protocol */ |
| 725 |
val = reg_encode(reg, EV_CHTYPE, GSI_CHANNEL_TYPE_GPI); |
| 726 |
/* EV_EE field is 0 (GSI_EE_AP) */ |
| 727 |
val |= reg_bit(reg, EV_INTYPE); |
| 728 |
val |= reg_encode(reg, EV_ELEMENT_SIZE, GSI_RING_ELEMENT_SIZE); |
| 729 |
iowrite32(val, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 730 |
|
| 731 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_1); |
| 732 |
val = reg_encode(reg, R_LENGTH, ring->count * GSI_RING_ELEMENT_SIZE); |
| 733 |
iowrite32(val, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 734 |
|
| 735 |
/* The context 2 and 3 registers store the low-order and |
| 736 |
* high-order 32 bits of the address of the event ring, |
| 737 |
* respectively. |
| 738 |
*/ |
| 739 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_2); |
| 740 |
val = lower_32_bits(ring->addr); |
| 741 |
iowrite32(val, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 742 |
|
| 743 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_3); |
| 744 |
val = upper_32_bits(ring->addr); |
| 745 |
iowrite32(val, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 746 |
|
| 747 |
/* Enable interrupt moderation by setting the moderation delay */ |
| 748 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_8); |
| 749 |
val = reg_encode(reg, EV_MODT, GSI_EVT_RING_INT_MODT); |
| 750 |
val |= reg_encode(reg, EV_MODC, 1); /* comes from channel */ |
| 751 |
/* EV_MOD_CNT is 0 (no counter-based interrupt coalescing) */ |
| 752 |
iowrite32(val, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 753 |
|
| 754 |
/* No MSI write data, and MSI high and low address is 0 */ |
| 755 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_9); |
| 756 |
iowrite32(0, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 757 |
|
| 758 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_10); |
| 759 |
iowrite32(0, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 760 |
|
| 761 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_11); |
| 762 |
iowrite32(0, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 763 |
|
| 764 |
/* We don't need to get event read pointer updates */ |
| 765 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_12); |
| 766 |
iowrite32(0, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 767 |
|
| 768 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_13); |
| 769 |
iowrite32(0, gsi->virt + reg_n_offset(reg, evt_ring_id)); |
| 770 |
|
| 771 |
/* Finally, tell the hardware our "last processed" event (arbitrary) */ |
| 772 |
gsi_evt_ring_doorbell(gsi, evt_ring_id, ring->index); |
| 773 |
} |
| 774 |
|
| 775 |
/* Find the transaction whose completion indicates a channel is quiesced */ |
| 776 |
static struct gsi_trans *gsi_channel_trans_last(struct gsi_channel *channel) |
| 777 |
{ |
| 778 |
struct gsi_trans_info *trans_info = &channel->trans_info; |
| 779 |
u32 pending_id = trans_info->pending_id; |
| 780 |
struct gsi_trans *trans; |
| 781 |
u16 trans_id; |
| 782 |
|
| 783 |
if (channel->toward_ipa && pending_id != trans_info->free_id) { |
| 784 |
/* There is a small chance a TX transaction got allocated |
| 785 |
* just before we disabled transmits, so check for that. |
| 786 |
* The last allocated, committed, or pending transaction |
| 787 |
* precedes the first free transaction. |
| 788 |
*/ |
| 789 |
trans_id = trans_info->free_id - 1; |
| 790 |
} else if (trans_info->polled_id != pending_id) { |
| 791 |
/* Otherwise (TX or RX) we want to wait for anything that |
| 792 |
* has completed, or has been polled but not released yet. |
| 793 |
* |
| 794 |
* The last completed or polled transaction precedes the |
| 795 |
* first pending transaction. |
| 796 |
*/ |
| 797 |
trans_id = pending_id - 1; |
| 798 |
} else { |
| 799 |
return NULL; |
| 800 |
} |
| 801 |
|
| 802 |
/* Caller will wait for this, so take a reference */ |
| 803 |
trans = &trans_info->trans[trans_id % channel->tre_count]; |
| 804 |
refcount_inc(&trans->refcount); |
| 805 |
|
| 806 |
return trans; |
| 807 |
} |
| 808 |
|
| 809 |
/* Wait for transaction activity on a channel to complete */ |
| 810 |
static void gsi_channel_trans_quiesce(struct gsi_channel *channel) |
| 811 |
{ |
| 812 |
struct gsi_trans *trans; |
| 813 |
|
| 814 |
/* Get the last transaction, and wait for it to complete */ |
| 815 |
trans = gsi_channel_trans_last(channel); |
| 816 |
if (trans) { |
| 817 |
wait_for_completion(&trans->completion); |
| 818 |
gsi_trans_free(trans); |
| 819 |
} |
| 820 |
} |
| 821 |
|
| 822 |
/* Program a channel for use; there is no gsi_channel_deprogram() */ |
| 823 |
static void gsi_channel_program(struct gsi_channel *channel, bool doorbell) |
| 824 |
{ |
| 825 |
size_t size = channel->tre_ring.count * GSI_RING_ELEMENT_SIZE; |
| 826 |
u32 channel_id = gsi_channel_id(channel); |
| 827 |
union gsi_channel_scratch scr = { }; |
| 828 |
struct gsi_channel_scratch_gpi *gpi; |
| 829 |
struct gsi *gsi = channel->gsi; |
| 830 |
const struct reg *reg; |
| 831 |
u32 wrr_weight = 0; |
| 832 |
u32 offset; |
| 833 |
u32 val; |
| 834 |
|
| 835 |
reg = gsi_reg(gsi, CH_C_CNTXT_0); |
| 836 |
|
| 837 |
/* We program all channels as GPI type/protocol */ |
| 838 |
val = ch_c_cntxt_0_type_encode(gsi->version, reg, GSI_CHANNEL_TYPE_GPI); |
| 839 |
if (channel->toward_ipa) |
| 840 |
val |= reg_bit(reg, CHTYPE_DIR); |
| 841 |
if (gsi->version < IPA_VERSION_5_0) |
| 842 |
val |= reg_encode(reg, ERINDEX, channel->evt_ring_id); |
| 843 |
val |= reg_encode(reg, ELEMENT_SIZE, GSI_RING_ELEMENT_SIZE); |
| 844 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 845 |
|
| 846 |
reg = gsi_reg(gsi, CH_C_CNTXT_1); |
| 847 |
val = reg_encode(reg, CH_R_LENGTH, size); |
| 848 |
if (gsi->version >= IPA_VERSION_5_0) |
| 849 |
val |= reg_encode(reg, CH_ERINDEX, channel->evt_ring_id); |
| 850 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 851 |
|
| 852 |
/* The context 2 and 3 registers store the low-order and |
| 853 |
* high-order 32 bits of the address of the channel ring, |
| 854 |
* respectively. |
| 855 |
*/ |
| 856 |
reg = gsi_reg(gsi, CH_C_CNTXT_2); |
| 857 |
val = lower_32_bits(channel->tre_ring.addr); |
| 858 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 859 |
|
| 860 |
reg = gsi_reg(gsi, CH_C_CNTXT_3); |
| 861 |
val = upper_32_bits(channel->tre_ring.addr); |
| 862 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 863 |
|
| 864 |
reg = gsi_reg(gsi, CH_C_QOS); |
| 865 |
|
| 866 |
/* Command channel gets low weighted round-robin priority */ |
| 867 |
if (channel->command) |
| 868 |
wrr_weight = reg_field_max(reg, WRR_WEIGHT); |
| 869 |
val = reg_encode(reg, WRR_WEIGHT, wrr_weight); |
| 870 |
|
| 871 |
/* Max prefetch is 1 segment (do not set MAX_PREFETCH_FMASK) */ |
| 872 |
|
| 873 |
/* No need to use the doorbell engine starting at IPA v4.0 */ |
| 874 |
if (gsi->version < IPA_VERSION_4_0 && doorbell) |
| 875 |
val |= reg_bit(reg, USE_DB_ENG); |
| 876 |
|
| 877 |
/* v4.0 introduces an escape buffer for prefetch. We use it |
| 878 |
* on all but the AP command channel. |
| 879 |
*/ |
| 880 |
if (gsi->version >= IPA_VERSION_4_0 && !channel->command) { |
| 881 |
/* If not otherwise set, prefetch buffers are used */ |
| 882 |
if (gsi->version < IPA_VERSION_4_5) |
| 883 |
val |= reg_bit(reg, USE_ESCAPE_BUF_ONLY); |
| 884 |
else |
| 885 |
val |= reg_encode(reg, PREFETCH_MODE, ESCAPE_BUF_ONLY); |
| 886 |
} |
| 887 |
/* All channels set DB_IN_BYTES */ |
| 888 |
if (gsi->version >= IPA_VERSION_4_9) |
| 889 |
val |= reg_bit(reg, DB_IN_BYTES); |
| 890 |
|
| 891 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 892 |
|
| 893 |
/* Now update the scratch registers for GPI protocol */ |
| 894 |
gpi = &scr.gpi; |
| 895 |
gpi->max_outstanding_tre = channel->trans_tre_max * |
| 896 |
GSI_RING_ELEMENT_SIZE; |
| 897 |
gpi->outstanding_threshold = 2 * GSI_RING_ELEMENT_SIZE; |
| 898 |
|
| 899 |
reg = gsi_reg(gsi, CH_C_SCRATCH_0); |
| 900 |
val = scr.data.word1; |
| 901 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 902 |
|
| 903 |
reg = gsi_reg(gsi, CH_C_SCRATCH_1); |
| 904 |
val = scr.data.word2; |
| 905 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 906 |
|
| 907 |
reg = gsi_reg(gsi, CH_C_SCRATCH_2); |
| 908 |
val = scr.data.word3; |
| 909 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 910 |
|
| 911 |
/* We must preserve the upper 16 bits of the last scratch register. |
| 912 |
* The next sequence assumes those bits remain unchanged between the |
| 913 |
* read and the write. |
| 914 |
*/ |
| 915 |
reg = gsi_reg(gsi, CH_C_SCRATCH_3); |
| 916 |
offset = reg_n_offset(reg, channel_id); |
| 917 |
val = ioread32(gsi->virt + offset); |
| 918 |
val = (scr.data.word4 & GENMASK(31, 16)) | (val & GENMASK(15, 0)); |
| 919 |
iowrite32(val, gsi->virt + offset); |
| 920 |
|
| 921 |
/* All done! */ |
| 922 |
} |
| 923 |
|
| 924 |
static int __gsi_channel_start(struct gsi_channel *channel, bool resume) |
| 925 |
{ |
| 926 |
struct gsi *gsi = channel->gsi; |
| 927 |
int ret; |
| 928 |
|
| 929 |
/* Prior to IPA v4.0 suspend/resume is not implemented by GSI */ |
| 930 |
if (resume && gsi->version < IPA_VERSION_4_0) |
| 931 |
return 0; |
| 932 |
|
| 933 |
mutex_lock(&gsi->mutex); |
| 934 |
|
| 935 |
ret = gsi_channel_start_command(channel); |
| 936 |
|
| 937 |
mutex_unlock(&gsi->mutex); |
| 938 |
|
| 939 |
return ret; |
| 940 |
} |
| 941 |
|
| 942 |
/* Start an allocated GSI channel */ |
| 943 |
int gsi_channel_start(struct gsi *gsi, u32 channel_id) |
| 944 |
{ |
| 945 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 946 |
int ret; |
| 947 |
|
| 948 |
/* Enable NAPI and the completion interrupt */ |
| 949 |
napi_enable(&channel->napi); |
| 950 |
gsi_irq_ieob_enable_one(gsi, channel->evt_ring_id); |
| 951 |
|
| 952 |
ret = __gsi_channel_start(channel, false); |
| 953 |
if (ret) { |
| 954 |
gsi_irq_ieob_disable_one(gsi, channel->evt_ring_id); |
| 955 |
napi_disable(&channel->napi); |
| 956 |
} |
| 957 |
|
| 958 |
return ret; |
| 959 |
} |
| 960 |
|
| 961 |
static int gsi_channel_stop_retry(struct gsi_channel *channel) |
| 962 |
{ |
| 963 |
u32 retries = GSI_CHANNEL_STOP_RETRIES; |
| 964 |
int ret; |
| 965 |
|
| 966 |
do { |
| 967 |
ret = gsi_channel_stop_command(channel); |
| 968 |
if (ret != -EAGAIN) |
| 969 |
break; |
| 970 |
usleep_range(3 * USEC_PER_MSEC, 5 * USEC_PER_MSEC); |
| 971 |
} while (retries--); |
| 972 |
|
| 973 |
return ret; |
| 974 |
} |
| 975 |
|
| 976 |
static int __gsi_channel_stop(struct gsi_channel *channel, bool suspend) |
| 977 |
{ |
| 978 |
struct gsi *gsi = channel->gsi; |
| 979 |
int ret; |
| 980 |
|
| 981 |
/* Wait for any underway transactions to complete before stopping. */ |
| 982 |
gsi_channel_trans_quiesce(channel); |
| 983 |
|
| 984 |
/* Prior to IPA v4.0 suspend/resume is not implemented by GSI */ |
| 985 |
if (suspend && gsi->version < IPA_VERSION_4_0) |
| 986 |
return 0; |
| 987 |
|
| 988 |
mutex_lock(&gsi->mutex); |
| 989 |
|
| 990 |
ret = gsi_channel_stop_retry(channel); |
| 991 |
|
| 992 |
mutex_unlock(&gsi->mutex); |
| 993 |
|
| 994 |
return ret; |
| 995 |
} |
| 996 |
|
| 997 |
/* Stop a started channel */ |
| 998 |
int gsi_channel_stop(struct gsi *gsi, u32 channel_id) |
| 999 |
{ |
| 1000 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 1001 |
int ret; |
| 1002 |
|
| 1003 |
ret = __gsi_channel_stop(channel, false); |
| 1004 |
if (ret) |
| 1005 |
return ret; |
| 1006 |
|
| 1007 |
/* Disable the completion interrupt and NAPI if successful */ |
| 1008 |
gsi_irq_ieob_disable_one(gsi, channel->evt_ring_id); |
| 1009 |
napi_disable(&channel->napi); |
| 1010 |
|
| 1011 |
return 0; |
| 1012 |
} |
| 1013 |
|
| 1014 |
/* Reset and reconfigure a channel, (possibly) enabling the doorbell engine */ |
| 1015 |
void gsi_channel_reset(struct gsi *gsi, u32 channel_id, bool doorbell) |
| 1016 |
{ |
| 1017 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 1018 |
|
| 1019 |
mutex_lock(&gsi->mutex); |
| 1020 |
|
| 1021 |
gsi_channel_reset_command(channel); |
| 1022 |
/* Due to a hardware quirk we may need to reset RX channels twice. */ |
| 1023 |
if (gsi->version < IPA_VERSION_4_0 && !channel->toward_ipa) |
| 1024 |
gsi_channel_reset_command(channel); |
| 1025 |
|
| 1026 |
/* Hardware assumes this is 0 following reset */ |
| 1027 |
channel->tre_ring.index = 0; |
| 1028 |
gsi_channel_program(channel, doorbell); |
| 1029 |
gsi_channel_trans_cancel_pending(channel); |
| 1030 |
|
| 1031 |
mutex_unlock(&gsi->mutex); |
| 1032 |
} |
| 1033 |
|
| 1034 |
/* Stop a started channel for suspend */ |
| 1035 |
int gsi_channel_suspend(struct gsi *gsi, u32 channel_id) |
| 1036 |
{ |
| 1037 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 1038 |
int ret; |
| 1039 |
|
| 1040 |
ret = __gsi_channel_stop(channel, true); |
| 1041 |
if (ret) |
| 1042 |
return ret; |
| 1043 |
|
| 1044 |
/* Ensure NAPI polling has finished. */ |
| 1045 |
napi_synchronize(&channel->napi); |
| 1046 |
|
| 1047 |
return 0; |
| 1048 |
} |
| 1049 |
|
| 1050 |
/* Resume a suspended channel (starting if stopped) */ |
| 1051 |
int gsi_channel_resume(struct gsi *gsi, u32 channel_id) |
| 1052 |
{ |
| 1053 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 1054 |
|
| 1055 |
return __gsi_channel_start(channel, true); |
| 1056 |
} |
| 1057 |
|
| 1058 |
/* Prevent all GSI interrupts while suspended */ |
| 1059 |
void gsi_suspend(struct gsi *gsi) |
| 1060 |
{ |
| 1061 |
disable_irq(gsi->irq); |
| 1062 |
} |
| 1063 |
|
| 1064 |
/* Allow all GSI interrupts again when resuming */ |
| 1065 |
void gsi_resume(struct gsi *gsi) |
| 1066 |
{ |
| 1067 |
enable_irq(gsi->irq); |
| 1068 |
} |
| 1069 |
|
| 1070 |
void gsi_trans_tx_committed(struct gsi_trans *trans) |
| 1071 |
{ |
| 1072 |
struct gsi_channel *channel = &trans->gsi->channel[trans->channel_id]; |
| 1073 |
|
| 1074 |
channel->trans_count++; |
| 1075 |
channel->byte_count += trans->len; |
| 1076 |
|
| 1077 |
trans->trans_count = channel->trans_count; |
| 1078 |
trans->byte_count = channel->byte_count; |
| 1079 |
} |
| 1080 |
|
| 1081 |
void gsi_trans_tx_queued(struct gsi_trans *trans) |
| 1082 |
{ |
| 1083 |
u32 channel_id = trans->channel_id; |
| 1084 |
struct gsi *gsi = trans->gsi; |
| 1085 |
struct gsi_channel *channel; |
| 1086 |
u32 trans_count; |
| 1087 |
u32 byte_count; |
| 1088 |
|
| 1089 |
channel = &gsi->channel[channel_id]; |
| 1090 |
|
| 1091 |
byte_count = channel->byte_count - channel->queued_byte_count; |
| 1092 |
trans_count = channel->trans_count - channel->queued_trans_count; |
| 1093 |
channel->queued_byte_count = channel->byte_count; |
| 1094 |
channel->queued_trans_count = channel->trans_count; |
| 1095 |
|
| 1096 |
ipa_gsi_channel_tx_queued(gsi, channel_id, trans_count, byte_count); |
| 1097 |
} |
| 1098 |
|
| 1099 |
/** |
| 1100 |
* gsi_trans_tx_completed() - Report completed TX transactions |
| 1101 |
* @trans: TX channel transaction that has completed |
| 1102 |
* |
| 1103 |
* Report that a transaction on a TX channel has completed. At the time a |
| 1104 |
* transaction is committed, we record *in the transaction* its channel's |
| 1105 |
* committed transaction and byte counts. Transactions are completed in |
| 1106 |
* order, and the difference between the channel's byte/transaction count |
| 1107 |
* when the transaction was committed and when it completes tells us |
| 1108 |
* exactly how much data has been transferred while the transaction was |
| 1109 |
* pending. |
| 1110 |
* |
| 1111 |
* We report this information to the network stack, which uses it to manage |
| 1112 |
* the rate at which data is sent to hardware. |
| 1113 |
*/ |
| 1114 |
static void gsi_trans_tx_completed(struct gsi_trans *trans) |
| 1115 |
{ |
| 1116 |
u32 channel_id = trans->channel_id; |
| 1117 |
struct gsi *gsi = trans->gsi; |
| 1118 |
struct gsi_channel *channel; |
| 1119 |
u32 trans_count; |
| 1120 |
u32 byte_count; |
| 1121 |
|
| 1122 |
channel = &gsi->channel[channel_id]; |
| 1123 |
trans_count = trans->trans_count - channel->compl_trans_count; |
| 1124 |
byte_count = trans->byte_count - channel->compl_byte_count; |
| 1125 |
|
| 1126 |
channel->compl_trans_count += trans_count; |
| 1127 |
channel->compl_byte_count += byte_count; |
| 1128 |
|
| 1129 |
ipa_gsi_channel_tx_completed(gsi, channel_id, trans_count, byte_count); |
| 1130 |
} |
| 1131 |
|
| 1132 |
/* Channel control interrupt handler */ |
| 1133 |
static void gsi_isr_chan_ctrl(struct gsi *gsi) |
| 1134 |
{ |
| 1135 |
const struct reg *reg; |
| 1136 |
u32 channel_mask; |
| 1137 |
|
| 1138 |
reg = gsi_reg(gsi, CNTXT_SRC_CH_IRQ); |
| 1139 |
channel_mask = ioread32(gsi->virt + reg_offset(reg)); |
| 1140 |
|
| 1141 |
reg = gsi_reg(gsi, CNTXT_SRC_CH_IRQ_CLR); |
| 1142 |
iowrite32(channel_mask, gsi->virt + reg_offset(reg)); |
| 1143 |
|
| 1144 |
while (channel_mask) { |
| 1145 |
u32 channel_id = __ffs(channel_mask); |
| 1146 |
|
| 1147 |
channel_mask ^= BIT(channel_id); |
| 1148 |
|
| 1149 |
complete(&gsi->completion); |
| 1150 |
} |
| 1151 |
} |
| 1152 |
|
| 1153 |
/* Event ring control interrupt handler */ |
| 1154 |
static void gsi_isr_evt_ctrl(struct gsi *gsi) |
| 1155 |
{ |
| 1156 |
const struct reg *reg; |
| 1157 |
u32 event_mask; |
| 1158 |
|
| 1159 |
reg = gsi_reg(gsi, CNTXT_SRC_EV_CH_IRQ); |
| 1160 |
event_mask = ioread32(gsi->virt + reg_offset(reg)); |
| 1161 |
|
| 1162 |
reg = gsi_reg(gsi, CNTXT_SRC_EV_CH_IRQ_CLR); |
| 1163 |
iowrite32(event_mask, gsi->virt + reg_offset(reg)); |
| 1164 |
|
| 1165 |
while (event_mask) { |
| 1166 |
u32 evt_ring_id = __ffs(event_mask); |
| 1167 |
|
| 1168 |
event_mask ^= BIT(evt_ring_id); |
| 1169 |
|
| 1170 |
complete(&gsi->completion); |
| 1171 |
} |
| 1172 |
} |
| 1173 |
|
| 1174 |
/* Global channel error interrupt handler */ |
| 1175 |
static void |
| 1176 |
gsi_isr_glob_chan_err(struct gsi *gsi, u32 err_ee, u32 channel_id, u32 code) |
| 1177 |
{ |
| 1178 |
if (code == GSI_OUT_OF_RESOURCES) { |
| 1179 |
dev_err(gsi->dev, "channel %u out of resources\n", channel_id); |
| 1180 |
complete(&gsi->completion); |
| 1181 |
return; |
| 1182 |
} |
| 1183 |
|
| 1184 |
/* Report, but otherwise ignore all other error codes */ |
| 1185 |
dev_err(gsi->dev, "channel %u global error ee 0x%08x code 0x%08x\n", |
| 1186 |
channel_id, err_ee, code); |
| 1187 |
} |
| 1188 |
|
| 1189 |
/* Global event error interrupt handler */ |
| 1190 |
static void |
| 1191 |
gsi_isr_glob_evt_err(struct gsi *gsi, u32 err_ee, u32 evt_ring_id, u32 code) |
| 1192 |
{ |
| 1193 |
if (code == GSI_OUT_OF_RESOURCES) { |
| 1194 |
struct gsi_evt_ring *evt_ring = &gsi->evt_ring[evt_ring_id]; |
| 1195 |
u32 channel_id = gsi_channel_id(evt_ring->channel); |
| 1196 |
|
| 1197 |
complete(&gsi->completion); |
| 1198 |
dev_err(gsi->dev, "evt_ring for channel %u out of resources\n", |
| 1199 |
channel_id); |
| 1200 |
return; |
| 1201 |
} |
| 1202 |
|
| 1203 |
/* Report, but otherwise ignore all other error codes */ |
| 1204 |
dev_err(gsi->dev, "event ring %u global error ee %u code 0x%08x\n", |
| 1205 |
evt_ring_id, err_ee, code); |
| 1206 |
} |
| 1207 |
|
| 1208 |
/* Global error interrupt handler */ |
| 1209 |
static void gsi_isr_glob_err(struct gsi *gsi) |
| 1210 |
{ |
| 1211 |
const struct reg *log_reg; |
| 1212 |
const struct reg *clr_reg; |
| 1213 |
enum gsi_err_type type; |
| 1214 |
enum gsi_err_code code; |
| 1215 |
u32 offset; |
| 1216 |
u32 which; |
| 1217 |
u32 val; |
| 1218 |
u32 ee; |
| 1219 |
|
| 1220 |
/* Get the logged error, then reinitialize the log */ |
| 1221 |
log_reg = gsi_reg(gsi, ERROR_LOG); |
| 1222 |
offset = reg_offset(log_reg); |
| 1223 |
val = ioread32(gsi->virt + offset); |
| 1224 |
iowrite32(0, gsi->virt + offset); |
| 1225 |
|
| 1226 |
clr_reg = gsi_reg(gsi, ERROR_LOG_CLR); |
| 1227 |
iowrite32(~0, gsi->virt + reg_offset(clr_reg)); |
| 1228 |
|
| 1229 |
/* Parse the error value */ |
| 1230 |
ee = reg_decode(log_reg, ERR_EE, val); |
| 1231 |
type = reg_decode(log_reg, ERR_TYPE, val); |
| 1232 |
which = reg_decode(log_reg, ERR_VIRT_IDX, val); |
| 1233 |
code = reg_decode(log_reg, ERR_CODE, val); |
| 1234 |
|
| 1235 |
if (type == GSI_ERR_TYPE_CHAN) |
| 1236 |
gsi_isr_glob_chan_err(gsi, ee, which, code); |
| 1237 |
else if (type == GSI_ERR_TYPE_EVT) |
| 1238 |
gsi_isr_glob_evt_err(gsi, ee, which, code); |
| 1239 |
else /* type GSI_ERR_TYPE_GLOB should be fatal */ |
| 1240 |
dev_err(gsi->dev, "unexpected global error 0x%08x\n", type); |
| 1241 |
} |
| 1242 |
|
| 1243 |
/* Generic EE interrupt handler */ |
| 1244 |
static void gsi_isr_gp_int1(struct gsi *gsi) |
| 1245 |
{ |
| 1246 |
const struct reg *reg; |
| 1247 |
u32 result; |
| 1248 |
u32 val; |
| 1249 |
|
| 1250 |
/* This interrupt is used to handle completions of GENERIC GSI |
| 1251 |
* commands. We use these to allocate and halt channels on the |
| 1252 |
* modem's behalf due to a hardware quirk on IPA v4.2. The modem |
| 1253 |
* "owns" channels even when the AP allocates them, and have no |
| 1254 |
* way of knowing whether a modem channel's state has been changed. |
| 1255 |
* |
| 1256 |
* We also use GENERIC commands to enable/disable channel flow |
| 1257 |
* control for IPA v4.2+. |
| 1258 |
* |
| 1259 |
* It is recommended that we halt the modem channels we allocated |
| 1260 |
* when shutting down, but it's possible the channel isn't running |
| 1261 |
* at the time we issue the HALT command. We'll get an error in |
| 1262 |
* that case, but it's harmless (the channel is already halted). |
| 1263 |
* Similarly, we could get an error back when updating flow control |
| 1264 |
* on a channel because it's not in the proper state. |
| 1265 |
* |
| 1266 |
* In either case, we silently ignore a INCORRECT_CHANNEL_STATE |
| 1267 |
* error if we receive it. |
| 1268 |
*/ |
| 1269 |
reg = gsi_reg(gsi, CNTXT_SCRATCH_0); |
| 1270 |
val = ioread32(gsi->virt + reg_offset(reg)); |
| 1271 |
result = reg_decode(reg, GENERIC_EE_RESULT, val); |
| 1272 |
|
| 1273 |
switch (result) { |
| 1274 |
case GENERIC_EE_SUCCESS: |
| 1275 |
case GENERIC_EE_INCORRECT_CHANNEL_STATE: |
| 1276 |
gsi->result = 0; |
| 1277 |
break; |
| 1278 |
|
| 1279 |
case GENERIC_EE_RETRY: |
| 1280 |
gsi->result = -EAGAIN; |
| 1281 |
break; |
| 1282 |
|
| 1283 |
default: |
| 1284 |
dev_err(gsi->dev, "global INT1 generic result %u\n", result); |
| 1285 |
gsi->result = -EIO; |
| 1286 |
break; |
| 1287 |
} |
| 1288 |
|
| 1289 |
complete(&gsi->completion); |
| 1290 |
} |
| 1291 |
|
| 1292 |
/* Inter-EE interrupt handler */ |
| 1293 |
static void gsi_isr_glob_ee(struct gsi *gsi) |
| 1294 |
{ |
| 1295 |
const struct reg *reg; |
| 1296 |
u32 val; |
| 1297 |
|
| 1298 |
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_STTS); |
| 1299 |
val = ioread32(gsi->virt + reg_offset(reg)); |
| 1300 |
|
| 1301 |
if (val & ERROR_INT) |
| 1302 |
gsi_isr_glob_err(gsi); |
| 1303 |
|
| 1304 |
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_CLR); |
| 1305 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 1306 |
|
| 1307 |
val &= ~ERROR_INT; |
| 1308 |
|
| 1309 |
if (val & GP_INT1) { |
| 1310 |
val ^= GP_INT1; |
| 1311 |
gsi_isr_gp_int1(gsi); |
| 1312 |
} |
| 1313 |
|
| 1314 |
if (val) |
| 1315 |
dev_err(gsi->dev, "unexpected global interrupt 0x%08x\n", val); |
| 1316 |
} |
| 1317 |
|
| 1318 |
/* I/O completion interrupt event */ |
| 1319 |
static void gsi_isr_ieob(struct gsi *gsi) |
| 1320 |
{ |
| 1321 |
const struct reg *reg; |
| 1322 |
u32 event_mask; |
| 1323 |
|
| 1324 |
reg = gsi_reg(gsi, CNTXT_SRC_IEOB_IRQ); |
| 1325 |
event_mask = ioread32(gsi->virt + reg_offset(reg)); |
| 1326 |
|
| 1327 |
gsi_irq_ieob_disable(gsi, event_mask); |
| 1328 |
|
| 1329 |
reg = gsi_reg(gsi, CNTXT_SRC_IEOB_IRQ_CLR); |
| 1330 |
iowrite32(event_mask, gsi->virt + reg_offset(reg)); |
| 1331 |
|
| 1332 |
while (event_mask) { |
| 1333 |
u32 evt_ring_id = __ffs(event_mask); |
| 1334 |
|
| 1335 |
event_mask ^= BIT(evt_ring_id); |
| 1336 |
|
| 1337 |
napi_schedule(&gsi->evt_ring[evt_ring_id].channel->napi); |
| 1338 |
} |
| 1339 |
} |
| 1340 |
|
| 1341 |
/* General event interrupts represent serious problems, so report them */ |
| 1342 |
static void gsi_isr_general(struct gsi *gsi) |
| 1343 |
{ |
| 1344 |
struct device *dev = gsi->dev; |
| 1345 |
const struct reg *reg; |
| 1346 |
u32 val; |
| 1347 |
|
| 1348 |
reg = gsi_reg(gsi, CNTXT_GSI_IRQ_STTS); |
| 1349 |
val = ioread32(gsi->virt + reg_offset(reg)); |
| 1350 |
|
| 1351 |
reg = gsi_reg(gsi, CNTXT_GSI_IRQ_CLR); |
| 1352 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 1353 |
|
| 1354 |
dev_err(dev, "unexpected general interrupt 0x%08x\n", val); |
| 1355 |
} |
| 1356 |
|
| 1357 |
/** |
| 1358 |
* gsi_isr() - Top level GSI interrupt service routine |
| 1359 |
* @irq: Interrupt number (ignored) |
| 1360 |
* @dev_id: GSI pointer supplied to request_irq() |
| 1361 |
* |
| 1362 |
* This is the main handler function registered for the GSI IRQ. Each type |
| 1363 |
* of interrupt has a separate handler function that is called from here. |
| 1364 |
*/ |
| 1365 |
static irqreturn_t gsi_isr(int irq, void *dev_id) |
| 1366 |
{ |
| 1367 |
struct gsi *gsi = dev_id; |
| 1368 |
const struct reg *reg; |
| 1369 |
u32 intr_mask; |
| 1370 |
u32 cnt = 0; |
| 1371 |
u32 offset; |
| 1372 |
|
| 1373 |
reg = gsi_reg(gsi, CNTXT_TYPE_IRQ); |
| 1374 |
offset = reg_offset(reg); |
| 1375 |
|
| 1376 |
/* enum gsi_irq_type_id defines GSI interrupt types */ |
| 1377 |
while ((intr_mask = ioread32(gsi->virt + offset))) { |
| 1378 |
/* intr_mask contains bitmask of pending GSI interrupts */ |
| 1379 |
do { |
| 1380 |
u32 gsi_intr = BIT(__ffs(intr_mask)); |
| 1381 |
|
| 1382 |
intr_mask ^= gsi_intr; |
| 1383 |
|
| 1384 |
/* Note: the IRQ condition for each type is cleared |
| 1385 |
* when the type-specific register is updated. |
| 1386 |
*/ |
| 1387 |
switch (gsi_intr) { |
| 1388 |
case GSI_CH_CTRL: |
| 1389 |
gsi_isr_chan_ctrl(gsi); |
| 1390 |
break; |
| 1391 |
case GSI_EV_CTRL: |
| 1392 |
gsi_isr_evt_ctrl(gsi); |
| 1393 |
break; |
| 1394 |
case GSI_GLOB_EE: |
| 1395 |
gsi_isr_glob_ee(gsi); |
| 1396 |
break; |
| 1397 |
case GSI_IEOB: |
| 1398 |
gsi_isr_ieob(gsi); |
| 1399 |
break; |
| 1400 |
case GSI_GENERAL: |
| 1401 |
gsi_isr_general(gsi); |
| 1402 |
break; |
| 1403 |
default: |
| 1404 |
dev_err(gsi->dev, |
| 1405 |
"unrecognized interrupt type 0x%08x\n", |
| 1406 |
gsi_intr); |
| 1407 |
break; |
| 1408 |
} |
| 1409 |
} while (intr_mask); |
| 1410 |
|
| 1411 |
if (++cnt > GSI_ISR_MAX_ITER) { |
| 1412 |
dev_err(gsi->dev, "interrupt flood\n"); |
| 1413 |
break; |
| 1414 |
} |
| 1415 |
} |
| 1416 |
|
| 1417 |
return IRQ_HANDLED; |
| 1418 |
} |
| 1419 |
|
| 1420 |
/* Init function for GSI IRQ lookup; there is no gsi_irq_exit() */ |
| 1421 |
static int gsi_irq_init(struct gsi *gsi, struct platform_device *pdev) |
| 1422 |
{ |
| 1423 |
int ret; |
| 1424 |
|
| 1425 |
ret = platform_get_irq_byname(pdev, "gsi"); |
| 1426 |
if (ret <= 0) |
| 1427 |
return ret ? : -EINVAL; |
| 1428 |
|
| 1429 |
gsi->irq = ret; |
| 1430 |
|
| 1431 |
return 0; |
| 1432 |
} |
| 1433 |
|
| 1434 |
/* Return the transaction associated with a transfer completion event */ |
| 1435 |
static struct gsi_trans * |
| 1436 |
gsi_event_trans(struct gsi *gsi, struct gsi_event *event) |
| 1437 |
{ |
| 1438 |
u32 channel_id = event->chid; |
| 1439 |
struct gsi_channel *channel; |
| 1440 |
struct gsi_trans *trans; |
| 1441 |
u32 tre_offset; |
| 1442 |
u32 tre_index; |
| 1443 |
|
| 1444 |
channel = &gsi->channel[channel_id]; |
| 1445 |
if (WARN(!channel->gsi, "event has bad channel %u\n", channel_id)) |
| 1446 |
return NULL; |
| 1447 |
|
| 1448 |
/* Event xfer_ptr records the TRE it's associated with */ |
| 1449 |
tre_offset = lower_32_bits(le64_to_cpu(event->xfer_ptr)); |
| 1450 |
tre_index = gsi_ring_index(&channel->tre_ring, tre_offset); |
| 1451 |
|
| 1452 |
trans = gsi_channel_trans_mapped(channel, tre_index); |
| 1453 |
|
| 1454 |
if (WARN(!trans, "channel %u event with no transaction\n", channel_id)) |
| 1455 |
return NULL; |
| 1456 |
|
| 1457 |
return trans; |
| 1458 |
} |
| 1459 |
|
| 1460 |
/** |
| 1461 |
* gsi_evt_ring_update() - Update transaction state from hardware |
| 1462 |
* @gsi: GSI pointer |
| 1463 |
* @evt_ring_id: Event ring ID |
| 1464 |
* @index: Event index in ring reported by hardware |
| 1465 |
* |
| 1466 |
* Events for RX channels contain the actual number of bytes received into |
| 1467 |
* the buffer. Every event has a transaction associated with it, and here |
| 1468 |
* we update transactions to record their actual received lengths. |
| 1469 |
* |
| 1470 |
* When an event for a TX channel arrives we use information in the |
| 1471 |
* transaction to report the number of requests and bytes that have |
| 1472 |
* been transferred. |
| 1473 |
* |
| 1474 |
* This function is called whenever we learn that the GSI hardware has filled |
| 1475 |
* new events since the last time we checked. The ring's index field tells |
| 1476 |
* the first entry in need of processing. The index provided is the |
| 1477 |
* first *unfilled* event in the ring (following the last filled one). |
| 1478 |
* |
| 1479 |
* Events are sequential within the event ring, and transactions are |
| 1480 |
* sequential within the transaction array. |
| 1481 |
* |
| 1482 |
* Note that @index always refers to an element *within* the event ring. |
| 1483 |
*/ |
| 1484 |
static void gsi_evt_ring_update(struct gsi *gsi, u32 evt_ring_id, u32 index) |
| 1485 |
{ |
| 1486 |
struct gsi_evt_ring *evt_ring = &gsi->evt_ring[evt_ring_id]; |
| 1487 |
struct gsi_ring *ring = &evt_ring->ring; |
| 1488 |
struct gsi_event *event_done; |
| 1489 |
struct gsi_event *event; |
| 1490 |
u32 event_avail; |
| 1491 |
u32 old_index; |
| 1492 |
|
| 1493 |
/* Starting with the oldest un-processed event, determine which |
| 1494 |
* transaction (and which channel) is associated with the event. |
| 1495 |
* For RX channels, update each completed transaction with the |
| 1496 |
* number of bytes that were actually received. For TX channels |
| 1497 |
* associated with a network device, report to the network stack |
| 1498 |
* the number of transfers and bytes this completion represents. |
| 1499 |
*/ |
| 1500 |
old_index = ring->index; |
| 1501 |
event = gsi_ring_virt(ring, old_index); |
| 1502 |
|
| 1503 |
/* Compute the number of events to process before we wrap, |
| 1504 |
* and determine when we'll be done processing events. |
| 1505 |
*/ |
| 1506 |
event_avail = ring->count - old_index % ring->count; |
| 1507 |
event_done = gsi_ring_virt(ring, index); |
| 1508 |
do { |
| 1509 |
struct gsi_trans *trans; |
| 1510 |
|
| 1511 |
trans = gsi_event_trans(gsi, event); |
| 1512 |
if (!trans) |
| 1513 |
return; |
| 1514 |
|
| 1515 |
if (trans->direction == DMA_FROM_DEVICE) |
| 1516 |
trans->len = __le16_to_cpu(event->len); |
| 1517 |
else |
| 1518 |
gsi_trans_tx_completed(trans); |
| 1519 |
|
| 1520 |
gsi_trans_move_complete(trans); |
| 1521 |
|
| 1522 |
/* Move on to the next event and transaction */ |
| 1523 |
if (--event_avail) |
| 1524 |
event++; |
| 1525 |
else |
| 1526 |
event = gsi_ring_virt(ring, 0); |
| 1527 |
} while (event != event_done); |
| 1528 |
|
| 1529 |
/* Tell the hardware we've handled these events */ |
| 1530 |
gsi_evt_ring_doorbell(gsi, evt_ring_id, index); |
| 1531 |
} |
| 1532 |
|
| 1533 |
/* Initialize a ring, including allocating DMA memory for its entries */ |
| 1534 |
static int gsi_ring_alloc(struct gsi *gsi, struct gsi_ring *ring, u32 count) |
| 1535 |
{ |
| 1536 |
u32 size = count * GSI_RING_ELEMENT_SIZE; |
| 1537 |
struct device *dev = gsi->dev; |
| 1538 |
dma_addr_t addr; |
| 1539 |
|
| 1540 |
/* Hardware requires a 2^n ring size, with alignment equal to size. |
| 1541 |
* The DMA address returned by dma_alloc_coherent() is guaranteed to |
| 1542 |
* be a power-of-2 number of pages, which satisfies the requirement. |
| 1543 |
*/ |
| 1544 |
ring->virt = dma_alloc_coherent(dev, size, &addr, GFP_KERNEL); |
| 1545 |
if (!ring->virt) |
| 1546 |
return -ENOMEM; |
| 1547 |
|
| 1548 |
ring->addr = addr; |
| 1549 |
ring->count = count; |
| 1550 |
ring->index = 0; |
| 1551 |
|
| 1552 |
return 0; |
| 1553 |
} |
| 1554 |
|
| 1555 |
/* Free a previously-allocated ring */ |
| 1556 |
static void gsi_ring_free(struct gsi *gsi, struct gsi_ring *ring) |
| 1557 |
{ |
| 1558 |
size_t size = ring->count * GSI_RING_ELEMENT_SIZE; |
| 1559 |
|
| 1560 |
dma_free_coherent(gsi->dev, size, ring->virt, ring->addr); |
| 1561 |
} |
| 1562 |
|
| 1563 |
/* Allocate an available event ring id */ |
| 1564 |
static int gsi_evt_ring_id_alloc(struct gsi *gsi) |
| 1565 |
{ |
| 1566 |
u32 evt_ring_id; |
| 1567 |
|
| 1568 |
if (gsi->event_bitmap == ~0U) { |
| 1569 |
dev_err(gsi->dev, "event rings exhausted\n"); |
| 1570 |
return -ENOSPC; |
| 1571 |
} |
| 1572 |
|
| 1573 |
evt_ring_id = ffz(gsi->event_bitmap); |
| 1574 |
gsi->event_bitmap |= BIT(evt_ring_id); |
| 1575 |
|
| 1576 |
return (int)evt_ring_id; |
| 1577 |
} |
| 1578 |
|
| 1579 |
/* Free a previously-allocated event ring id */ |
| 1580 |
static void gsi_evt_ring_id_free(struct gsi *gsi, u32 evt_ring_id) |
| 1581 |
{ |
| 1582 |
gsi->event_bitmap &= ~BIT(evt_ring_id); |
| 1583 |
} |
| 1584 |
|
| 1585 |
/* Ring a channel doorbell, reporting the first un-filled entry */ |
| 1586 |
void gsi_channel_doorbell(struct gsi_channel *channel) |
| 1587 |
{ |
| 1588 |
struct gsi_ring *tre_ring = &channel->tre_ring; |
| 1589 |
u32 channel_id = gsi_channel_id(channel); |
| 1590 |
struct gsi *gsi = channel->gsi; |
| 1591 |
const struct reg *reg; |
| 1592 |
u32 val; |
| 1593 |
|
| 1594 |
reg = gsi_reg(gsi, CH_C_DOORBELL_0); |
| 1595 |
/* Note: index *must* be used modulo the ring count here */ |
| 1596 |
val = gsi_ring_addr(tre_ring, tre_ring->index % tre_ring->count); |
| 1597 |
iowrite32(val, gsi->virt + reg_n_offset(reg, channel_id)); |
| 1598 |
} |
| 1599 |
|
| 1600 |
/* Consult hardware, move newly completed transactions to completed state */ |
| 1601 |
void gsi_channel_update(struct gsi_channel *channel) |
| 1602 |
{ |
| 1603 |
u32 evt_ring_id = channel->evt_ring_id; |
| 1604 |
struct gsi *gsi = channel->gsi; |
| 1605 |
struct gsi_evt_ring *evt_ring; |
| 1606 |
struct gsi_trans *trans; |
| 1607 |
struct gsi_ring *ring; |
| 1608 |
const struct reg *reg; |
| 1609 |
u32 offset; |
| 1610 |
u32 index; |
| 1611 |
|
| 1612 |
evt_ring = &gsi->evt_ring[evt_ring_id]; |
| 1613 |
ring = &evt_ring->ring; |
| 1614 |
|
| 1615 |
/* See if there's anything new to process; if not, we're done. Note |
| 1616 |
* that index always refers to an entry *within* the event ring. |
| 1617 |
*/ |
| 1618 |
reg = gsi_reg(gsi, EV_CH_E_CNTXT_4); |
| 1619 |
offset = reg_n_offset(reg, evt_ring_id); |
| 1620 |
index = gsi_ring_index(ring, ioread32(gsi->virt + offset)); |
| 1621 |
if (index == ring->index % ring->count) |
| 1622 |
return; |
| 1623 |
|
| 1624 |
/* Get the transaction for the latest completed event. */ |
| 1625 |
trans = gsi_event_trans(gsi, gsi_ring_virt(ring, index - 1)); |
| 1626 |
if (!trans) |
| 1627 |
return; |
| 1628 |
|
| 1629 |
/* For RX channels, update each completed transaction with the number |
| 1630 |
* of bytes that were actually received. For TX channels, report |
| 1631 |
* the number of transactions and bytes this completion represents |
| 1632 |
* up the network stack. |
| 1633 |
*/ |
| 1634 |
gsi_evt_ring_update(gsi, evt_ring_id, index); |
| 1635 |
} |
| 1636 |
|
| 1637 |
/** |
| 1638 |
* gsi_channel_poll_one() - Return a single completed transaction on a channel |
| 1639 |
* @channel: Channel to be polled |
| 1640 |
* |
| 1641 |
* Return: Transaction pointer, or null if none are available |
| 1642 |
* |
| 1643 |
* This function returns the first of a channel's completed transactions. |
| 1644 |
* If no transactions are in completed state, the hardware is consulted to |
| 1645 |
* determine whether any new transactions have completed. If so, they're |
| 1646 |
* moved to completed state and the first such transaction is returned. |
| 1647 |
* If there are no more completed transactions, a null pointer is returned. |
| 1648 |
*/ |
| 1649 |
static struct gsi_trans *gsi_channel_poll_one(struct gsi_channel *channel) |
| 1650 |
{ |
| 1651 |
struct gsi_trans *trans; |
| 1652 |
|
| 1653 |
/* Get the first completed transaction */ |
| 1654 |
trans = gsi_channel_trans_complete(channel); |
| 1655 |
if (trans) |
| 1656 |
gsi_trans_move_polled(trans); |
| 1657 |
|
| 1658 |
return trans; |
| 1659 |
} |
| 1660 |
|
| 1661 |
/** |
| 1662 |
* gsi_channel_poll() - NAPI poll function for a channel |
| 1663 |
* @napi: NAPI structure for the channel |
| 1664 |
* @budget: Budget supplied by NAPI core |
| 1665 |
* |
| 1666 |
* Return: Number of items polled (<= budget) |
| 1667 |
* |
| 1668 |
* Single transactions completed by hardware are polled until either |
| 1669 |
* the budget is exhausted, or there are no more. Each transaction |
| 1670 |
* polled is passed to gsi_trans_complete(), to perform remaining |
| 1671 |
* completion processing and retire/free the transaction. |
| 1672 |
*/ |
| 1673 |
static int gsi_channel_poll(struct napi_struct *napi, int budget) |
| 1674 |
{ |
| 1675 |
struct gsi_channel *channel; |
| 1676 |
int count; |
| 1677 |
|
| 1678 |
channel = container_of(napi, struct gsi_channel, napi); |
| 1679 |
for (count = 0; count < budget; count++) { |
| 1680 |
struct gsi_trans *trans; |
| 1681 |
|
| 1682 |
trans = gsi_channel_poll_one(channel); |
| 1683 |
if (!trans) |
| 1684 |
break; |
| 1685 |
gsi_trans_complete(trans); |
| 1686 |
} |
| 1687 |
|
| 1688 |
if (count < budget && napi_complete(napi)) |
| 1689 |
gsi_irq_ieob_enable_one(channel->gsi, channel->evt_ring_id); |
| 1690 |
|
| 1691 |
return count; |
| 1692 |
} |
| 1693 |
|
| 1694 |
/* The event bitmap represents which event ids are available for allocation. |
| 1695 |
* Set bits are not available, clear bits can be used. This function |
| 1696 |
* initializes the map so all events supported by the hardware are available, |
| 1697 |
* then precludes any reserved events from being allocated. |
| 1698 |
*/ |
| 1699 |
static u32 gsi_event_bitmap_init(u32 evt_ring_max) |
| 1700 |
{ |
| 1701 |
u32 event_bitmap = GENMASK(BITS_PER_LONG - 1, evt_ring_max); |
| 1702 |
|
| 1703 |
event_bitmap |= GENMASK(GSI_MHI_EVENT_ID_END, GSI_MHI_EVENT_ID_START); |
| 1704 |
|
| 1705 |
return event_bitmap; |
| 1706 |
} |
| 1707 |
|
| 1708 |
/* Setup function for a single channel */ |
| 1709 |
static int gsi_channel_setup_one(struct gsi *gsi, u32 channel_id) |
| 1710 |
{ |
| 1711 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 1712 |
u32 evt_ring_id = channel->evt_ring_id; |
| 1713 |
int ret; |
| 1714 |
|
| 1715 |
if (!gsi_channel_initialized(channel)) |
| 1716 |
return 0; |
| 1717 |
|
| 1718 |
ret = gsi_evt_ring_alloc_command(gsi, evt_ring_id); |
| 1719 |
if (ret) |
| 1720 |
return ret; |
| 1721 |
|
| 1722 |
gsi_evt_ring_program(gsi, evt_ring_id); |
| 1723 |
|
| 1724 |
ret = gsi_channel_alloc_command(gsi, channel_id); |
| 1725 |
if (ret) |
| 1726 |
goto err_evt_ring_de_alloc; |
| 1727 |
|
| 1728 |
gsi_channel_program(channel, true); |
| 1729 |
|
| 1730 |
if (channel->toward_ipa) |
| 1731 |
netif_napi_add_tx(gsi->dummy_dev, &channel->napi, |
| 1732 |
gsi_channel_poll); |
| 1733 |
else |
| 1734 |
netif_napi_add(gsi->dummy_dev, &channel->napi, |
| 1735 |
gsi_channel_poll); |
| 1736 |
|
| 1737 |
return 0; |
| 1738 |
|
| 1739 |
err_evt_ring_de_alloc: |
| 1740 |
/* We've done nothing with the event ring yet so don't reset */ |
| 1741 |
gsi_evt_ring_de_alloc_command(gsi, evt_ring_id); |
| 1742 |
|
| 1743 |
return ret; |
| 1744 |
} |
| 1745 |
|
| 1746 |
/* Inverse of gsi_channel_setup_one() */ |
| 1747 |
static void gsi_channel_teardown_one(struct gsi *gsi, u32 channel_id) |
| 1748 |
{ |
| 1749 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 1750 |
u32 evt_ring_id = channel->evt_ring_id; |
| 1751 |
|
| 1752 |
if (!gsi_channel_initialized(channel)) |
| 1753 |
return; |
| 1754 |
|
| 1755 |
netif_napi_del(&channel->napi); |
| 1756 |
|
| 1757 |
gsi_channel_de_alloc_command(gsi, channel_id); |
| 1758 |
gsi_evt_ring_reset_command(gsi, evt_ring_id); |
| 1759 |
gsi_evt_ring_de_alloc_command(gsi, evt_ring_id); |
| 1760 |
} |
| 1761 |
|
| 1762 |
/* We use generic commands only to operate on modem channels. We don't have |
| 1763 |
* the ability to determine channel state for a modem channel, so we simply |
| 1764 |
* issue the command and wait for it to complete. |
| 1765 |
*/ |
| 1766 |
static int gsi_generic_command(struct gsi *gsi, u32 channel_id, |
| 1767 |
enum gsi_generic_cmd_opcode opcode, |
| 1768 |
u8 params) |
| 1769 |
{ |
| 1770 |
const struct reg *reg; |
| 1771 |
bool timeout; |
| 1772 |
u32 offset; |
| 1773 |
u32 val; |
| 1774 |
|
| 1775 |
/* The error global interrupt type is always enabled (until we tear |
| 1776 |
* down), so we will keep it enabled. |
| 1777 |
* |
| 1778 |
* A generic EE command completes with a GSI global interrupt of |
| 1779 |
* type GP_INT1. We only perform one generic command at a time |
| 1780 |
* (to allocate, halt, or enable/disable flow control on a modem |
| 1781 |
* channel), and only from this function. So we enable the GP_INT1 |
| 1782 |
* IRQ type here, and disable it again after the command completes. |
| 1783 |
*/ |
| 1784 |
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_EN); |
| 1785 |
val = ERROR_INT | GP_INT1; |
| 1786 |
iowrite32(val, gsi->virt + reg_offset(reg)); |
| 1787 |
|
| 1788 |
/* First zero the result code field */ |
| 1789 |
reg = gsi_reg(gsi, CNTXT_SCRATCH_0); |
| 1790 |
offset = reg_offset(reg); |
| 1791 |
val = ioread32(gsi->virt + offset); |
| 1792 |
|
| 1793 |
val &= ~reg_fmask(reg, GENERIC_EE_RESULT); |
| 1794 |
iowrite32(val, gsi->virt + offset); |
| 1795 |
|
| 1796 |
/* Now issue the command */ |
| 1797 |
reg = gsi_reg(gsi, GENERIC_CMD); |
| 1798 |
val = reg_encode(reg, GENERIC_OPCODE, opcode); |
| 1799 |
val |= reg_encode(reg, GENERIC_CHID, channel_id); |
| 1800 |
val |= reg_encode(reg, GENERIC_EE, GSI_EE_MODEM); |
| 1801 |
if (gsi->version >= IPA_VERSION_4_11) |
| 1802 |
val |= reg_encode(reg, GENERIC_PARAMS, params); |
| 1803 |
|
| 1804 |
timeout = !gsi_command(gsi, reg_offset(reg), val); |
| 1805 |
|
| 1806 |
/* Disable the GP_INT1 IRQ type again */ |
| 1807 |
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_EN); |
| 1808 |
iowrite32(ERROR_INT, gsi->virt + reg_offset(reg)); |
| 1809 |
|
| 1810 |
if (!timeout) |
| 1811 |
return gsi->result; |
| 1812 |
|
| 1813 |
dev_err(gsi->dev, "GSI generic command %u to channel %u timed out\n", |
| 1814 |
opcode, channel_id); |
| 1815 |
|
| 1816 |
return -ETIMEDOUT; |
| 1817 |
} |
| 1818 |
|
| 1819 |
static int gsi_modem_channel_alloc(struct gsi *gsi, u32 channel_id) |
| 1820 |
{ |
| 1821 |
return gsi_generic_command(gsi, channel_id, |
| 1822 |
GSI_GENERIC_ALLOCATE_CHANNEL, 0); |
| 1823 |
} |
| 1824 |
|
| 1825 |
static void gsi_modem_channel_halt(struct gsi *gsi, u32 channel_id) |
| 1826 |
{ |
| 1827 |
u32 retries = GSI_CHANNEL_MODEM_HALT_RETRIES; |
| 1828 |
int ret; |
| 1829 |
|
| 1830 |
do |
| 1831 |
ret = gsi_generic_command(gsi, channel_id, |
| 1832 |
GSI_GENERIC_HALT_CHANNEL, 0); |
| 1833 |
while (ret == -EAGAIN && retries--); |
| 1834 |
|
| 1835 |
if (ret) |
| 1836 |
dev_err(gsi->dev, "error %d halting modem channel %u\n", |
| 1837 |
ret, channel_id); |
| 1838 |
} |
| 1839 |
|
| 1840 |
/* Enable or disable flow control for a modem GSI TX channel (IPA v4.2+) */ |
| 1841 |
void |
| 1842 |
gsi_modem_channel_flow_control(struct gsi *gsi, u32 channel_id, bool enable) |
| 1843 |
{ |
| 1844 |
u32 retries = 0; |
| 1845 |
u32 command; |
| 1846 |
int ret; |
| 1847 |
|
| 1848 |
command = enable ? GSI_GENERIC_ENABLE_FLOW_CONTROL |
| 1849 |
: GSI_GENERIC_DISABLE_FLOW_CONTROL; |
| 1850 |
/* Disabling flow control on IPA v4.11+ can return -EAGAIN if enable |
| 1851 |
* is underway. In this case we need to retry the command. |
| 1852 |
*/ |
| 1853 |
if (!enable && gsi->version >= IPA_VERSION_4_11) |
| 1854 |
retries = GSI_CHANNEL_MODEM_FLOW_RETRIES; |
| 1855 |
|
| 1856 |
do |
| 1857 |
ret = gsi_generic_command(gsi, channel_id, command, 0); |
| 1858 |
while (ret == -EAGAIN && retries--); |
| 1859 |
|
| 1860 |
if (ret) |
| 1861 |
dev_err(gsi->dev, |
| 1862 |
"error %d %sabling mode channel %u flow control\n", |
| 1863 |
ret, enable ? "en" : "dis", channel_id); |
| 1864 |
} |
| 1865 |
|
| 1866 |
/* Setup function for channels */ |
| 1867 |
static int gsi_channel_setup(struct gsi *gsi) |
| 1868 |
{ |
| 1869 |
u32 channel_id = 0; |
| 1870 |
u32 mask; |
| 1871 |
int ret; |
| 1872 |
|
| 1873 |
gsi_irq_enable(gsi); |
| 1874 |
|
| 1875 |
mutex_lock(&gsi->mutex); |
| 1876 |
|
| 1877 |
do { |
| 1878 |
ret = gsi_channel_setup_one(gsi, channel_id); |
| 1879 |
if (ret) |
| 1880 |
goto err_unwind; |
| 1881 |
} while (++channel_id < gsi->channel_count); |
| 1882 |
|
| 1883 |
/* Make sure no channels were defined that hardware does not support */ |
| 1884 |
while (channel_id < GSI_CHANNEL_COUNT_MAX) { |
| 1885 |
struct gsi_channel *channel = &gsi->channel[channel_id++]; |
| 1886 |
|
| 1887 |
if (!gsi_channel_initialized(channel)) |
| 1888 |
continue; |
| 1889 |
|
| 1890 |
ret = -EINVAL; |
| 1891 |
dev_err(gsi->dev, "channel %u not supported by hardware\n", |
| 1892 |
channel_id - 1); |
| 1893 |
channel_id = gsi->channel_count; |
| 1894 |
goto err_unwind; |
| 1895 |
} |
| 1896 |
|
| 1897 |
/* Allocate modem channels if necessary */ |
| 1898 |
mask = gsi->modem_channel_bitmap; |
| 1899 |
while (mask) { |
| 1900 |
u32 modem_channel_id = __ffs(mask); |
| 1901 |
|
| 1902 |
ret = gsi_modem_channel_alloc(gsi, modem_channel_id); |
| 1903 |
if (ret) |
| 1904 |
goto err_unwind_modem; |
| 1905 |
|
| 1906 |
/* Clear bit from mask only after success (for unwind) */ |
| 1907 |
mask ^= BIT(modem_channel_id); |
| 1908 |
} |
| 1909 |
|
| 1910 |
mutex_unlock(&gsi->mutex); |
| 1911 |
|
| 1912 |
return 0; |
| 1913 |
|
| 1914 |
err_unwind_modem: |
| 1915 |
/* Compute which modem channels need to be deallocated */ |
| 1916 |
mask ^= gsi->modem_channel_bitmap; |
| 1917 |
while (mask) { |
| 1918 |
channel_id = __fls(mask); |
| 1919 |
|
| 1920 |
mask ^= BIT(channel_id); |
| 1921 |
|
| 1922 |
gsi_modem_channel_halt(gsi, channel_id); |
| 1923 |
} |
| 1924 |
|
| 1925 |
err_unwind: |
| 1926 |
while (channel_id--) |
| 1927 |
gsi_channel_teardown_one(gsi, channel_id); |
| 1928 |
|
| 1929 |
mutex_unlock(&gsi->mutex); |
| 1930 |
|
| 1931 |
gsi_irq_disable(gsi); |
| 1932 |
|
| 1933 |
return ret; |
| 1934 |
} |
| 1935 |
|
| 1936 |
/* Inverse of gsi_channel_setup() */ |
| 1937 |
static void gsi_channel_teardown(struct gsi *gsi) |
| 1938 |
{ |
| 1939 |
u32 mask = gsi->modem_channel_bitmap; |
| 1940 |
u32 channel_id; |
| 1941 |
|
| 1942 |
mutex_lock(&gsi->mutex); |
| 1943 |
|
| 1944 |
while (mask) { |
| 1945 |
channel_id = __fls(mask); |
| 1946 |
|
| 1947 |
mask ^= BIT(channel_id); |
| 1948 |
|
| 1949 |
gsi_modem_channel_halt(gsi, channel_id); |
| 1950 |
} |
| 1951 |
|
| 1952 |
channel_id = gsi->channel_count - 1; |
| 1953 |
do |
| 1954 |
gsi_channel_teardown_one(gsi, channel_id); |
| 1955 |
while (channel_id--); |
| 1956 |
|
| 1957 |
mutex_unlock(&gsi->mutex); |
| 1958 |
|
| 1959 |
gsi_irq_disable(gsi); |
| 1960 |
} |
| 1961 |
|
| 1962 |
/* Turn off all GSI interrupts initially */ |
| 1963 |
static int gsi_irq_setup(struct gsi *gsi) |
| 1964 |
{ |
| 1965 |
const struct reg *reg; |
| 1966 |
int ret; |
| 1967 |
|
| 1968 |
/* Writing 1 indicates IRQ interrupts; 0 would be MSI */ |
| 1969 |
reg = gsi_reg(gsi, CNTXT_INTSET); |
| 1970 |
iowrite32(reg_bit(reg, INTYPE), gsi->virt + reg_offset(reg)); |
| 1971 |
|
| 1972 |
/* Disable all interrupt types */ |
| 1973 |
gsi_irq_type_update(gsi, 0); |
| 1974 |
|
| 1975 |
/* Clear all type-specific interrupt masks */ |
| 1976 |
reg = gsi_reg(gsi, CNTXT_SRC_CH_IRQ_MSK); |
| 1977 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 1978 |
|
| 1979 |
reg = gsi_reg(gsi, CNTXT_SRC_EV_CH_IRQ_MSK); |
| 1980 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 1981 |
|
| 1982 |
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_EN); |
| 1983 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 1984 |
|
| 1985 |
reg = gsi_reg(gsi, CNTXT_SRC_IEOB_IRQ_MSK); |
| 1986 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 1987 |
|
| 1988 |
/* The inter-EE interrupts are not supported for IPA v3.0-v3.1 */ |
| 1989 |
if (gsi->version > IPA_VERSION_3_1) { |
| 1990 |
reg = gsi_reg(gsi, INTER_EE_SRC_CH_IRQ_MSK); |
| 1991 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 1992 |
|
| 1993 |
reg = gsi_reg(gsi, INTER_EE_SRC_EV_CH_IRQ_MSK); |
| 1994 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 1995 |
} |
| 1996 |
|
| 1997 |
reg = gsi_reg(gsi, CNTXT_GSI_IRQ_EN); |
| 1998 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 1999 |
|
| 2000 |
ret = request_irq(gsi->irq, gsi_isr, 0, "gsi", gsi); |
| 2001 |
if (ret) |
| 2002 |
dev_err(gsi->dev, "error %d requesting \"gsi\" IRQ\n", ret); |
| 2003 |
|
| 2004 |
return ret; |
| 2005 |
} |
| 2006 |
|
| 2007 |
static void gsi_irq_teardown(struct gsi *gsi) |
| 2008 |
{ |
| 2009 |
free_irq(gsi->irq, gsi); |
| 2010 |
} |
| 2011 |
|
| 2012 |
/* Get # supported channel and event rings; there is no gsi_ring_teardown() */ |
| 2013 |
static int gsi_ring_setup(struct gsi *gsi) |
| 2014 |
{ |
| 2015 |
struct device *dev = gsi->dev; |
| 2016 |
const struct reg *reg; |
| 2017 |
u32 count; |
| 2018 |
u32 val; |
| 2019 |
|
| 2020 |
if (gsi->version < IPA_VERSION_3_5_1) { |
| 2021 |
/* No HW_PARAM_2 register prior to IPA v3.5.1, assume the max */ |
| 2022 |
gsi->channel_count = GSI_CHANNEL_COUNT_MAX; |
| 2023 |
gsi->evt_ring_count = GSI_EVT_RING_COUNT_MAX; |
| 2024 |
|
| 2025 |
return 0; |
| 2026 |
} |
| 2027 |
|
| 2028 |
reg = gsi_reg(gsi, HW_PARAM_2); |
| 2029 |
val = ioread32(gsi->virt + reg_offset(reg)); |
| 2030 |
|
| 2031 |
count = reg_decode(reg, NUM_CH_PER_EE, val); |
| 2032 |
if (!count) { |
| 2033 |
dev_err(dev, "GSI reports zero channels supported\n"); |
| 2034 |
return -EINVAL; |
| 2035 |
} |
| 2036 |
if (count > GSI_CHANNEL_COUNT_MAX) { |
| 2037 |
dev_warn(dev, "limiting to %u channels; hardware supports %u\n", |
| 2038 |
GSI_CHANNEL_COUNT_MAX, count); |
| 2039 |
count = GSI_CHANNEL_COUNT_MAX; |
| 2040 |
} |
| 2041 |
gsi->channel_count = count; |
| 2042 |
|
| 2043 |
if (gsi->version < IPA_VERSION_5_0) { |
| 2044 |
count = reg_decode(reg, NUM_EV_PER_EE, val); |
| 2045 |
} else { |
| 2046 |
reg = gsi_reg(gsi, HW_PARAM_4); |
| 2047 |
val = ioread32(gsi->virt + reg_offset(reg)); |
| 2048 |
count = reg_decode(reg, EV_PER_EE, val); |
| 2049 |
} |
| 2050 |
if (!count) { |
| 2051 |
dev_err(dev, "GSI reports zero event rings supported\n"); |
| 2052 |
return -EINVAL; |
| 2053 |
} |
| 2054 |
if (count > GSI_EVT_RING_COUNT_MAX) { |
| 2055 |
dev_warn(dev, |
| 2056 |
"limiting to %u event rings; hardware supports %u\n", |
| 2057 |
GSI_EVT_RING_COUNT_MAX, count); |
| 2058 |
count = GSI_EVT_RING_COUNT_MAX; |
| 2059 |
} |
| 2060 |
gsi->evt_ring_count = count; |
| 2061 |
|
| 2062 |
return 0; |
| 2063 |
} |
| 2064 |
|
| 2065 |
/* Setup function for GSI. GSI firmware must be loaded and initialized */ |
| 2066 |
int gsi_setup(struct gsi *gsi) |
| 2067 |
{ |
| 2068 |
const struct reg *reg; |
| 2069 |
u32 val; |
| 2070 |
int ret; |
| 2071 |
|
| 2072 |
/* Here is where we first touch the GSI hardware */ |
| 2073 |
reg = gsi_reg(gsi, GSI_STATUS); |
| 2074 |
val = ioread32(gsi->virt + reg_offset(reg)); |
| 2075 |
if (!(val & reg_bit(reg, ENABLED))) { |
| 2076 |
dev_err(gsi->dev, "GSI has not been enabled\n"); |
| 2077 |
return -EIO; |
| 2078 |
} |
| 2079 |
|
| 2080 |
ret = gsi_irq_setup(gsi); |
| 2081 |
if (ret) |
| 2082 |
return ret; |
| 2083 |
|
| 2084 |
ret = gsi_ring_setup(gsi); /* No matching teardown required */ |
| 2085 |
if (ret) |
| 2086 |
goto err_irq_teardown; |
| 2087 |
|
| 2088 |
/* Initialize the error log */ |
| 2089 |
reg = gsi_reg(gsi, ERROR_LOG); |
| 2090 |
iowrite32(0, gsi->virt + reg_offset(reg)); |
| 2091 |
|
| 2092 |
ret = gsi_channel_setup(gsi); |
| 2093 |
if (ret) |
| 2094 |
goto err_irq_teardown; |
| 2095 |
|
| 2096 |
return 0; |
| 2097 |
|
| 2098 |
err_irq_teardown: |
| 2099 |
gsi_irq_teardown(gsi); |
| 2100 |
|
| 2101 |
return ret; |
| 2102 |
} |
| 2103 |
|
| 2104 |
/* Inverse of gsi_setup() */ |
| 2105 |
void gsi_teardown(struct gsi *gsi) |
| 2106 |
{ |
| 2107 |
gsi_channel_teardown(gsi); |
| 2108 |
gsi_irq_teardown(gsi); |
| 2109 |
} |
| 2110 |
|
| 2111 |
/* Initialize a channel's event ring */ |
| 2112 |
static int gsi_channel_evt_ring_init(struct gsi_channel *channel) |
| 2113 |
{ |
| 2114 |
struct gsi *gsi = channel->gsi; |
| 2115 |
struct gsi_evt_ring *evt_ring; |
| 2116 |
int ret; |
| 2117 |
|
| 2118 |
ret = gsi_evt_ring_id_alloc(gsi); |
| 2119 |
if (ret < 0) |
| 2120 |
return ret; |
| 2121 |
channel->evt_ring_id = ret; |
| 2122 |
|
| 2123 |
evt_ring = &gsi->evt_ring[channel->evt_ring_id]; |
| 2124 |
evt_ring->channel = channel; |
| 2125 |
|
| 2126 |
ret = gsi_ring_alloc(gsi, &evt_ring->ring, channel->event_count); |
| 2127 |
if (!ret) |
| 2128 |
return 0; /* Success! */ |
| 2129 |
|
| 2130 |
dev_err(gsi->dev, "error %d allocating channel %u event ring\n", |
| 2131 |
ret, gsi_channel_id(channel)); |
| 2132 |
|
| 2133 |
gsi_evt_ring_id_free(gsi, channel->evt_ring_id); |
| 2134 |
|
| 2135 |
return ret; |
| 2136 |
} |
| 2137 |
|
| 2138 |
/* Inverse of gsi_channel_evt_ring_init() */ |
| 2139 |
static void gsi_channel_evt_ring_exit(struct gsi_channel *channel) |
| 2140 |
{ |
| 2141 |
u32 evt_ring_id = channel->evt_ring_id; |
| 2142 |
struct gsi *gsi = channel->gsi; |
| 2143 |
struct gsi_evt_ring *evt_ring; |
| 2144 |
|
| 2145 |
evt_ring = &gsi->evt_ring[evt_ring_id]; |
| 2146 |
gsi_ring_free(gsi, &evt_ring->ring); |
| 2147 |
gsi_evt_ring_id_free(gsi, evt_ring_id); |
| 2148 |
} |
| 2149 |
|
| 2150 |
static bool gsi_channel_data_valid(struct gsi *gsi, bool command, |
| 2151 |
const struct ipa_gsi_endpoint_data *data) |
| 2152 |
{ |
| 2153 |
const struct gsi_channel_data *channel_data; |
| 2154 |
u32 channel_id = data->channel_id; |
| 2155 |
struct device *dev = gsi->dev; |
| 2156 |
|
| 2157 |
/* Make sure channel ids are in the range driver supports */ |
| 2158 |
if (channel_id >= GSI_CHANNEL_COUNT_MAX) { |
| 2159 |
dev_err(dev, "bad channel id %u; must be less than %u\n", |
| 2160 |
channel_id, GSI_CHANNEL_COUNT_MAX); |
| 2161 |
return false; |
| 2162 |
} |
| 2163 |
|
| 2164 |
if (data->ee_id != GSI_EE_AP && data->ee_id != GSI_EE_MODEM) { |
| 2165 |
dev_err(dev, "bad EE id %u; not AP or modem\n", data->ee_id); |
| 2166 |
return false; |
| 2167 |
} |
| 2168 |
|
| 2169 |
if (command && !data->toward_ipa) { |
| 2170 |
dev_err(dev, "command channel %u is not TX\n", channel_id); |
| 2171 |
return false; |
| 2172 |
} |
| 2173 |
|
| 2174 |
channel_data = &data->channel; |
| 2175 |
|
| 2176 |
if (!channel_data->tlv_count || |
| 2177 |
channel_data->tlv_count > GSI_TLV_MAX) { |
| 2178 |
dev_err(dev, "channel %u bad tlv_count %u; must be 1..%u\n", |
| 2179 |
channel_id, channel_data->tlv_count, GSI_TLV_MAX); |
| 2180 |
return false; |
| 2181 |
} |
| 2182 |
|
| 2183 |
if (command && IPA_COMMAND_TRANS_TRE_MAX > channel_data->tlv_count) { |
| 2184 |
dev_err(dev, "command TRE max too big for channel %u (%u > %u)\n", |
| 2185 |
channel_id, IPA_COMMAND_TRANS_TRE_MAX, |
| 2186 |
channel_data->tlv_count); |
| 2187 |
return false; |
| 2188 |
} |
| 2189 |
|
| 2190 |
/* We have to allow at least one maximally-sized transaction to |
| 2191 |
* be outstanding (which would use tlv_count TREs). Given how |
| 2192 |
* gsi_channel_tre_max() is computed, tre_count has to be almost |
| 2193 |
* twice the TLV FIFO size to satisfy this requirement. |
| 2194 |
*/ |
| 2195 |
if (channel_data->tre_count < 2 * channel_data->tlv_count - 1) { |
| 2196 |
dev_err(dev, "channel %u TLV count %u exceeds TRE count %u\n", |
| 2197 |
channel_id, channel_data->tlv_count, |
| 2198 |
channel_data->tre_count); |
| 2199 |
return false; |
| 2200 |
} |
| 2201 |
|
| 2202 |
if (!is_power_of_2(channel_data->tre_count)) { |
| 2203 |
dev_err(dev, "channel %u bad tre_count %u; not power of 2\n", |
| 2204 |
channel_id, channel_data->tre_count); |
| 2205 |
return false; |
| 2206 |
} |
| 2207 |
|
| 2208 |
if (!is_power_of_2(channel_data->event_count)) { |
| 2209 |
dev_err(dev, "channel %u bad event_count %u; not power of 2\n", |
| 2210 |
channel_id, channel_data->event_count); |
| 2211 |
return false; |
| 2212 |
} |
| 2213 |
|
| 2214 |
return true; |
| 2215 |
} |
| 2216 |
|
| 2217 |
/* Init function for a single channel */ |
| 2218 |
static int gsi_channel_init_one(struct gsi *gsi, |
| 2219 |
const struct ipa_gsi_endpoint_data *data, |
| 2220 |
bool command) |
| 2221 |
{ |
| 2222 |
struct gsi_channel *channel; |
| 2223 |
u32 tre_count; |
| 2224 |
int ret; |
| 2225 |
|
| 2226 |
if (!gsi_channel_data_valid(gsi, command, data)) |
| 2227 |
return -EINVAL; |
| 2228 |
|
| 2229 |
/* Worst case we need an event for every outstanding TRE */ |
| 2230 |
if (data->channel.tre_count > data->channel.event_count) { |
| 2231 |
tre_count = data->channel.event_count; |
| 2232 |
dev_warn(gsi->dev, "channel %u limited to %u TREs\n", |
| 2233 |
data->channel_id, tre_count); |
| 2234 |
} else { |
| 2235 |
tre_count = data->channel.tre_count; |
| 2236 |
} |
| 2237 |
|
| 2238 |
channel = &gsi->channel[data->channel_id]; |
| 2239 |
memset(channel, 0, sizeof(*channel)); |
| 2240 |
|
| 2241 |
channel->gsi = gsi; |
| 2242 |
channel->toward_ipa = data->toward_ipa; |
| 2243 |
channel->command = command; |
| 2244 |
channel->trans_tre_max = data->channel.tlv_count; |
| 2245 |
channel->tre_count = tre_count; |
| 2246 |
channel->event_count = data->channel.event_count; |
| 2247 |
|
| 2248 |
ret = gsi_channel_evt_ring_init(channel); |
| 2249 |
if (ret) |
| 2250 |
goto err_clear_gsi; |
| 2251 |
|
| 2252 |
ret = gsi_ring_alloc(gsi, &channel->tre_ring, data->channel.tre_count); |
| 2253 |
if (ret) { |
| 2254 |
dev_err(gsi->dev, "error %d allocating channel %u ring\n", |
| 2255 |
ret, data->channel_id); |
| 2256 |
goto err_channel_evt_ring_exit; |
| 2257 |
} |
| 2258 |
|
| 2259 |
ret = gsi_channel_trans_init(gsi, data->channel_id); |
| 2260 |
if (ret) |
| 2261 |
goto err_ring_free; |
| 2262 |
|
| 2263 |
if (command) { |
| 2264 |
u32 tre_max = gsi_channel_tre_max(gsi, data->channel_id); |
| 2265 |
|
| 2266 |
ret = ipa_cmd_pool_init(channel, tre_max); |
| 2267 |
} |
| 2268 |
if (!ret) |
| 2269 |
return 0; /* Success! */ |
| 2270 |
|
| 2271 |
gsi_channel_trans_exit(channel); |
| 2272 |
err_ring_free: |
| 2273 |
gsi_ring_free(gsi, &channel->tre_ring); |
| 2274 |
err_channel_evt_ring_exit: |
| 2275 |
gsi_channel_evt_ring_exit(channel); |
| 2276 |
err_clear_gsi: |
| 2277 |
channel->gsi = NULL; /* Mark it not (fully) initialized */ |
| 2278 |
|
| 2279 |
return ret; |
| 2280 |
} |
| 2281 |
|
| 2282 |
/* Inverse of gsi_channel_init_one() */ |
| 2283 |
static void gsi_channel_exit_one(struct gsi_channel *channel) |
| 2284 |
{ |
| 2285 |
if (!gsi_channel_initialized(channel)) |
| 2286 |
return; |
| 2287 |
|
| 2288 |
if (channel->command) |
| 2289 |
ipa_cmd_pool_exit(channel); |
| 2290 |
gsi_channel_trans_exit(channel); |
| 2291 |
gsi_ring_free(channel->gsi, &channel->tre_ring); |
| 2292 |
gsi_channel_evt_ring_exit(channel); |
| 2293 |
} |
| 2294 |
|
| 2295 |
/* Init function for channels */ |
| 2296 |
static int gsi_channel_init(struct gsi *gsi, u32 count, |
| 2297 |
const struct ipa_gsi_endpoint_data *data) |
| 2298 |
{ |
| 2299 |
bool modem_alloc; |
| 2300 |
int ret = 0; |
| 2301 |
u32 i; |
| 2302 |
|
| 2303 |
/* IPA v4.2 requires the AP to allocate channels for the modem */ |
| 2304 |
modem_alloc = gsi->version == IPA_VERSION_4_2; |
| 2305 |
|
| 2306 |
gsi->event_bitmap = gsi_event_bitmap_init(GSI_EVT_RING_COUNT_MAX); |
| 2307 |
gsi->ieob_enabled_bitmap = 0; |
| 2308 |
|
| 2309 |
/* The endpoint data array is indexed by endpoint name */ |
| 2310 |
for (i = 0; i < count; i++) { |
| 2311 |
bool command = i == IPA_ENDPOINT_AP_COMMAND_TX; |
| 2312 |
|
| 2313 |
if (ipa_gsi_endpoint_data_empty(&data[i])) |
| 2314 |
continue; /* Skip over empty slots */ |
| 2315 |
|
| 2316 |
/* Mark modem channels to be allocated (hardware workaround) */ |
| 2317 |
if (data[i].ee_id == GSI_EE_MODEM) { |
| 2318 |
if (modem_alloc) |
| 2319 |
gsi->modem_channel_bitmap |= |
| 2320 |
BIT(data[i].channel_id); |
| 2321 |
continue; |
| 2322 |
} |
| 2323 |
|
| 2324 |
ret = gsi_channel_init_one(gsi, &data[i], command); |
| 2325 |
if (ret) |
| 2326 |
goto err_unwind; |
| 2327 |
} |
| 2328 |
|
| 2329 |
return ret; |
| 2330 |
|
| 2331 |
err_unwind: |
| 2332 |
while (i--) { |
| 2333 |
if (ipa_gsi_endpoint_data_empty(&data[i])) |
| 2334 |
continue; |
| 2335 |
if (modem_alloc && data[i].ee_id == GSI_EE_MODEM) { |
| 2336 |
gsi->modem_channel_bitmap &= ~BIT(data[i].channel_id); |
| 2337 |
continue; |
| 2338 |
} |
| 2339 |
gsi_channel_exit_one(&gsi->channel[data->channel_id]); |
| 2340 |
} |
| 2341 |
|
| 2342 |
return ret; |
| 2343 |
} |
| 2344 |
|
| 2345 |
/* Inverse of gsi_channel_init() */ |
| 2346 |
static void gsi_channel_exit(struct gsi *gsi) |
| 2347 |
{ |
| 2348 |
u32 channel_id = GSI_CHANNEL_COUNT_MAX - 1; |
| 2349 |
|
| 2350 |
do |
| 2351 |
gsi_channel_exit_one(&gsi->channel[channel_id]); |
| 2352 |
while (channel_id--); |
| 2353 |
gsi->modem_channel_bitmap = 0; |
| 2354 |
} |
| 2355 |
|
| 2356 |
/* Init function for GSI. GSI hardware does not need to be "ready" */ |
| 2357 |
int gsi_init(struct gsi *gsi, struct platform_device *pdev, |
| 2358 |
enum ipa_version version, u32 count, |
| 2359 |
const struct ipa_gsi_endpoint_data *data) |
| 2360 |
{ |
| 2361 |
int ret; |
| 2362 |
|
| 2363 |
gsi_validate_build(); |
| 2364 |
|
| 2365 |
gsi->dev = &pdev->dev; |
| 2366 |
gsi->version = version; |
| 2367 |
|
| 2368 |
/* GSI uses NAPI on all channels. Create a dummy network device |
| 2369 |
* for the channel NAPI contexts to be associated with. |
| 2370 |
*/ |
| 2371 |
gsi->dummy_dev = alloc_netdev_dummy(0); |
| 2372 |
if (!gsi->dummy_dev) |
| 2373 |
return -ENOMEM; |
| 2374 |
init_completion(&gsi->completion); |
| 2375 |
|
| 2376 |
ret = gsi_reg_init(gsi, pdev); |
| 2377 |
if (ret) |
| 2378 |
goto err_reg_exit; |
| 2379 |
|
| 2380 |
ret = gsi_irq_init(gsi, pdev); /* No matching exit required */ |
| 2381 |
if (ret) |
| 2382 |
goto err_reg_exit; |
| 2383 |
|
| 2384 |
ret = gsi_channel_init(gsi, count, data); |
| 2385 |
if (ret) |
| 2386 |
goto err_reg_exit; |
| 2387 |
|
| 2388 |
mutex_init(&gsi->mutex); |
| 2389 |
|
| 2390 |
return 0; |
| 2391 |
|
| 2392 |
err_reg_exit: |
| 2393 |
free_netdev(gsi->dummy_dev); |
| 2394 |
gsi_reg_exit(gsi); |
| 2395 |
|
| 2396 |
return ret; |
| 2397 |
} |
| 2398 |
|
| 2399 |
/* Inverse of gsi_init() */ |
| 2400 |
void gsi_exit(struct gsi *gsi) |
| 2401 |
{ |
| 2402 |
mutex_destroy(&gsi->mutex); |
| 2403 |
gsi_channel_exit(gsi); |
| 2404 |
free_netdev(gsi->dummy_dev); |
| 2405 |
gsi_reg_exit(gsi); |
| 2406 |
} |
| 2407 |
|
| 2408 |
/* The maximum number of outstanding TREs on a channel. This limits |
| 2409 |
* a channel's maximum number of transactions outstanding (worst case |
| 2410 |
* is one TRE per transaction). |
| 2411 |
* |
| 2412 |
* The absolute limit is the number of TREs in the channel's TRE ring, |
| 2413 |
* and in theory we should be able use all of them. But in practice, |
| 2414 |
* doing that led to the hardware reporting exhaustion of event ring |
| 2415 |
* slots for writing completion information. So the hardware limit |
| 2416 |
* would be (tre_count - 1). |
| 2417 |
* |
| 2418 |
* We reduce it a bit further though. Transaction resource pools are |
| 2419 |
* sized to be a little larger than this maximum, to allow resource |
| 2420 |
* allocations to always be contiguous. The number of entries in a |
| 2421 |
* TRE ring buffer is a power of 2, and the extra resources in a pool |
| 2422 |
* tends to nearly double the memory allocated for it. Reducing the |
| 2423 |
* maximum number of outstanding TREs allows the number of entries in |
| 2424 |
* a pool to avoid crossing that power-of-2 boundary, and this can |
| 2425 |
* substantially reduce pool memory requirements. The number we |
| 2426 |
* reduce it by matches the number added in gsi_trans_pool_init(). |
| 2427 |
*/ |
| 2428 |
u32 gsi_channel_tre_max(struct gsi *gsi, u32 channel_id) |
| 2429 |
{ |
| 2430 |
struct gsi_channel *channel = &gsi->channel[channel_id]; |
| 2431 |
|
| 2432 |
/* Hardware limit is channel->tre_count - 1 */ |
| 2433 |
return channel->tre_count - (channel->trans_tre_max - 1); |
| 2434 |
} |