| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* System Control and Management Interface (SCMI) Sensor Protocol |
| 4 |
* |
| 5 |
* Copyright (C) 2018-2022 ARM Ltd. |
| 6 |
*/ |
| 7 |
|
| 8 |
#define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt |
| 9 |
|
| 10 |
#include <linux/bitfield.h> |
| 11 |
#include <linux/module.h> |
| 12 |
#include <linux/scmi_protocol.h> |
| 13 |
|
| 14 |
#include "protocols.h" |
| 15 |
#include "notify.h" |
| 16 |
|
| 17 |
/* Updated only after ALL the mandatory features for that version are merged */ |
| 18 |
#define SCMI_PROTOCOL_SUPPORTED_VERSION 0x30001 |
| 19 |
|
| 20 |
#define SCMI_MAX_NUM_SENSOR_AXIS 63 |
| 21 |
#define SCMIv2_SENSOR_PROTOCOL 0x10000 |
| 22 |
|
| 23 |
enum scmi_sensor_protocol_cmd { |
| 24 |
SENSOR_DESCRIPTION_GET = 0x3, |
| 25 |
SENSOR_TRIP_POINT_NOTIFY = 0x4, |
| 26 |
SENSOR_TRIP_POINT_CONFIG = 0x5, |
| 27 |
SENSOR_READING_GET = 0x6, |
| 28 |
SENSOR_AXIS_DESCRIPTION_GET = 0x7, |
| 29 |
SENSOR_LIST_UPDATE_INTERVALS = 0x8, |
| 30 |
SENSOR_CONFIG_GET = 0x9, |
| 31 |
SENSOR_CONFIG_SET = 0xA, |
| 32 |
SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB, |
| 33 |
SENSOR_NAME_GET = 0xC, |
| 34 |
SENSOR_AXIS_NAME_GET = 0xD, |
| 35 |
}; |
| 36 |
|
| 37 |
struct scmi_msg_resp_sensor_attributes { |
| 38 |
__le16 num_sensors; |
| 39 |
u8 max_requests; |
| 40 |
u8 reserved; |
| 41 |
__le32 reg_addr_low; |
| 42 |
__le32 reg_addr_high; |
| 43 |
__le32 reg_size; |
| 44 |
}; |
| 45 |
|
| 46 |
/* v3 attributes_low macros */ |
| 47 |
#define SUPPORTS_UPDATE_NOTIFY(x) FIELD_GET(BIT(30), (x)) |
| 48 |
#define SENSOR_TSTAMP_EXP(x) FIELD_GET(GENMASK(14, 10), (x)) |
| 49 |
#define SUPPORTS_TIMESTAMP(x) FIELD_GET(BIT(9), (x)) |
| 50 |
#define SUPPORTS_EXTEND_ATTRS(x) FIELD_GET(BIT(8), (x)) |
| 51 |
|
| 52 |
/* v2 attributes_high macros */ |
| 53 |
#define SENSOR_UPDATE_BASE(x) FIELD_GET(GENMASK(31, 27), (x)) |
| 54 |
#define SENSOR_UPDATE_SCALE(x) FIELD_GET(GENMASK(26, 22), (x)) |
| 55 |
|
| 56 |
/* v3 attributes_high macros */ |
| 57 |
#define SENSOR_AXIS_NUMBER(x) FIELD_GET(GENMASK(21, 16), (x)) |
| 58 |
#define SUPPORTS_AXIS(x) FIELD_GET(BIT(8), (x)) |
| 59 |
|
| 60 |
/* v3 resolution macros */ |
| 61 |
#define SENSOR_RES(x) FIELD_GET(GENMASK(26, 0), (x)) |
| 62 |
#define SENSOR_RES_EXP(x) FIELD_GET(GENMASK(31, 27), (x)) |
| 63 |
|
| 64 |
struct scmi_msg_resp_attrs { |
| 65 |
__le32 min_range_low; |
| 66 |
__le32 min_range_high; |
| 67 |
__le32 max_range_low; |
| 68 |
__le32 max_range_high; |
| 69 |
}; |
| 70 |
|
| 71 |
struct scmi_msg_sensor_description { |
| 72 |
__le32 desc_index; |
| 73 |
}; |
| 74 |
|
| 75 |
struct scmi_msg_resp_sensor_description { |
| 76 |
__le16 num_returned; |
| 77 |
__le16 num_remaining; |
| 78 |
struct scmi_sensor_descriptor { |
| 79 |
__le32 id; |
| 80 |
__le32 attributes_low; |
| 81 |
/* Common attributes_low macros */ |
| 82 |
#define SUPPORTS_ASYNC_READ(x) FIELD_GET(BIT(31), (x)) |
| 83 |
#define SUPPORTS_EXTENDED_NAMES(x) FIELD_GET(BIT(29), (x)) |
| 84 |
#define NUM_TRIP_POINTS(x) FIELD_GET(GENMASK(7, 0), (x)) |
| 85 |
__le32 attributes_high; |
| 86 |
/* Common attributes_high macros */ |
| 87 |
#define SENSOR_SCALE(x) FIELD_GET(GENMASK(15, 11), (x)) |
| 88 |
#define SENSOR_SCALE_SIGN BIT(4) |
| 89 |
#define SENSOR_SCALE_EXTEND GENMASK(31, 5) |
| 90 |
#define SENSOR_TYPE(x) FIELD_GET(GENMASK(7, 0), (x)) |
| 91 |
u8 name[SCMI_SHORT_NAME_MAX_SIZE]; |
| 92 |
/* only for version > 2.0 */ |
| 93 |
__le32 power; |
| 94 |
__le32 resolution; |
| 95 |
struct scmi_msg_resp_attrs scalar_attrs; |
| 96 |
} desc[]; |
| 97 |
}; |
| 98 |
|
| 99 |
/* Base scmi_sensor_descriptor size excluding extended attrs after name */ |
| 100 |
#define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ 28 |
| 101 |
|
| 102 |
/* Sign extend to a full s32 */ |
| 103 |
#define S32_EXT(v) \ |
| 104 |
({ \ |
| 105 |
int __v = (v); \ |
| 106 |
\ |
| 107 |
if (__v & SENSOR_SCALE_SIGN) \ |
| 108 |
__v |= SENSOR_SCALE_EXTEND; \ |
| 109 |
__v; \ |
| 110 |
}) |
| 111 |
|
| 112 |
struct scmi_msg_sensor_axis_description_get { |
| 113 |
__le32 id; |
| 114 |
__le32 axis_desc_index; |
| 115 |
}; |
| 116 |
|
| 117 |
struct scmi_msg_resp_sensor_axis_description { |
| 118 |
__le32 num_axis_flags; |
| 119 |
#define NUM_AXIS_RETURNED(x) FIELD_GET(GENMASK(5, 0), (x)) |
| 120 |
#define NUM_AXIS_REMAINING(x) FIELD_GET(GENMASK(31, 26), (x)) |
| 121 |
struct scmi_axis_descriptor { |
| 122 |
__le32 id; |
| 123 |
__le32 attributes_low; |
| 124 |
#define SUPPORTS_EXTENDED_AXIS_NAMES(x) FIELD_GET(BIT(9), (x)) |
| 125 |
__le32 attributes_high; |
| 126 |
u8 name[SCMI_SHORT_NAME_MAX_SIZE]; |
| 127 |
__le32 resolution; |
| 128 |
struct scmi_msg_resp_attrs attrs; |
| 129 |
} desc[]; |
| 130 |
}; |
| 131 |
|
| 132 |
struct scmi_msg_resp_sensor_axis_names_description { |
| 133 |
__le32 num_axis_flags; |
| 134 |
struct scmi_sensor_axis_name_descriptor { |
| 135 |
__le32 axis_id; |
| 136 |
u8 name[SCMI_MAX_STR_SIZE]; |
| 137 |
} desc[]; |
| 138 |
}; |
| 139 |
|
| 140 |
/* Base scmi_axis_descriptor size excluding extended attrs after name */ |
| 141 |
#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ 28 |
| 142 |
|
| 143 |
struct scmi_msg_sensor_list_update_intervals { |
| 144 |
__le32 id; |
| 145 |
__le32 index; |
| 146 |
}; |
| 147 |
|
| 148 |
struct scmi_msg_resp_sensor_list_update_intervals { |
| 149 |
__le32 num_intervals_flags; |
| 150 |
#define NUM_INTERVALS_RETURNED(x) FIELD_GET(GENMASK(11, 0), (x)) |
| 151 |
#define SEGMENTED_INTVL_FORMAT(x) FIELD_GET(BIT(12), (x)) |
| 152 |
#define NUM_INTERVALS_REMAINING(x) FIELD_GET(GENMASK(31, 16), (x)) |
| 153 |
__le32 intervals[]; |
| 154 |
}; |
| 155 |
|
| 156 |
struct scmi_msg_sensor_request_notify { |
| 157 |
__le32 id; |
| 158 |
__le32 event_control; |
| 159 |
#define SENSOR_NOTIFY_ALL BIT(0) |
| 160 |
}; |
| 161 |
|
| 162 |
struct scmi_msg_set_sensor_trip_point { |
| 163 |
__le32 id; |
| 164 |
__le32 event_control; |
| 165 |
#define SENSOR_TP_EVENT_MASK (0x3) |
| 166 |
#define SENSOR_TP_DISABLED 0x0 |
| 167 |
#define SENSOR_TP_POSITIVE 0x1 |
| 168 |
#define SENSOR_TP_NEGATIVE 0x2 |
| 169 |
#define SENSOR_TP_BOTH 0x3 |
| 170 |
#define SENSOR_TP_ID(x) (((x) & 0xff) << 4) |
| 171 |
__le32 value_low; |
| 172 |
__le32 value_high; |
| 173 |
}; |
| 174 |
|
| 175 |
struct scmi_msg_sensor_config_set { |
| 176 |
__le32 id; |
| 177 |
__le32 sensor_config; |
| 178 |
}; |
| 179 |
|
| 180 |
struct scmi_msg_sensor_reading_get { |
| 181 |
__le32 id; |
| 182 |
__le32 flags; |
| 183 |
#define SENSOR_READ_ASYNC BIT(0) |
| 184 |
}; |
| 185 |
|
| 186 |
struct scmi_resp_sensor_reading_complete { |
| 187 |
__le32 id; |
| 188 |
__le32 readings_low; |
| 189 |
__le32 readings_high; |
| 190 |
}; |
| 191 |
|
| 192 |
struct scmi_sensor_reading_resp { |
| 193 |
__le32 sensor_value_low; |
| 194 |
__le32 sensor_value_high; |
| 195 |
__le32 timestamp_low; |
| 196 |
__le32 timestamp_high; |
| 197 |
}; |
| 198 |
|
| 199 |
struct scmi_resp_sensor_reading_complete_v3 { |
| 200 |
__le32 id; |
| 201 |
struct scmi_sensor_reading_resp readings[]; |
| 202 |
}; |
| 203 |
|
| 204 |
struct scmi_sensor_trip_notify_payld { |
| 205 |
__le32 agent_id; |
| 206 |
__le32 sensor_id; |
| 207 |
__le32 trip_point_desc; |
| 208 |
}; |
| 209 |
|
| 210 |
struct scmi_sensor_update_notify_payld { |
| 211 |
__le32 agent_id; |
| 212 |
__le32 sensor_id; |
| 213 |
struct scmi_sensor_reading_resp readings[]; |
| 214 |
}; |
| 215 |
|
| 216 |
struct sensors_info { |
| 217 |
bool notify_trip_point_cmd; |
| 218 |
bool notify_continuos_update_cmd; |
| 219 |
int num_sensors; |
| 220 |
int max_requests; |
| 221 |
u64 reg_addr; |
| 222 |
u32 reg_size; |
| 223 |
struct scmi_sensor_info *sensors; |
| 224 |
}; |
| 225 |
|
| 226 |
static int scmi_sensor_attributes_get(const struct scmi_protocol_handle *ph, |
| 227 |
struct sensors_info *si) |
| 228 |
{ |
| 229 |
int ret; |
| 230 |
struct scmi_xfer *t; |
| 231 |
struct scmi_msg_resp_sensor_attributes *attr; |
| 232 |
|
| 233 |
ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES, |
| 234 |
0, sizeof(*attr), &t); |
| 235 |
if (ret) |
| 236 |
return ret; |
| 237 |
|
| 238 |
attr = t->rx.buf; |
| 239 |
|
| 240 |
ret = ph->xops->do_xfer(ph, t); |
| 241 |
if (!ret) { |
| 242 |
si->num_sensors = le16_to_cpu(attr->num_sensors); |
| 243 |
si->max_requests = attr->max_requests; |
| 244 |
si->reg_addr = le32_to_cpu(attr->reg_addr_low) | |
| 245 |
(u64)le32_to_cpu(attr->reg_addr_high) << 32; |
| 246 |
si->reg_size = le32_to_cpu(attr->reg_size); |
| 247 |
} |
| 248 |
|
| 249 |
ph->xops->xfer_put(ph, t); |
| 250 |
|
| 251 |
if (!ret) { |
| 252 |
if (!ph->hops->protocol_msg_check(ph, |
| 253 |
SENSOR_TRIP_POINT_NOTIFY, NULL)) |
| 254 |
si->notify_trip_point_cmd = true; |
| 255 |
|
| 256 |
if (!ph->hops->protocol_msg_check(ph, |
| 257 |
SENSOR_CONTINUOUS_UPDATE_NOTIFY, |
| 258 |
NULL)) |
| 259 |
si->notify_continuos_update_cmd = true; |
| 260 |
} |
| 261 |
|
| 262 |
return ret; |
| 263 |
} |
| 264 |
|
| 265 |
static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out, |
| 266 |
const struct scmi_msg_resp_attrs *in) |
| 267 |
{ |
| 268 |
out->min_range = get_unaligned_le64((void *)&in->min_range_low); |
| 269 |
out->max_range = get_unaligned_le64((void *)&in->max_range_low); |
| 270 |
} |
| 271 |
|
| 272 |
struct scmi_sens_ipriv { |
| 273 |
void *priv; |
| 274 |
struct device *dev; |
| 275 |
}; |
| 276 |
|
| 277 |
static void iter_intervals_prepare_message(void *message, |
| 278 |
unsigned int desc_index, |
| 279 |
const void *p) |
| 280 |
{ |
| 281 |
struct scmi_msg_sensor_list_update_intervals *msg = message; |
| 282 |
const struct scmi_sensor_info *s; |
| 283 |
|
| 284 |
s = ((const struct scmi_sens_ipriv *)p)->priv; |
| 285 |
/* Set the number of sensors to be skipped/already read */ |
| 286 |
msg->id = cpu_to_le32(s->id); |
| 287 |
msg->index = cpu_to_le32(desc_index); |
| 288 |
} |
| 289 |
|
| 290 |
static int iter_intervals_update_state(struct scmi_iterator_state *st, |
| 291 |
const void *response, void *p) |
| 292 |
{ |
| 293 |
u32 flags; |
| 294 |
struct scmi_sensor_info *s = ((struct scmi_sens_ipriv *)p)->priv; |
| 295 |
struct device *dev = ((struct scmi_sens_ipriv *)p)->dev; |
| 296 |
const struct scmi_msg_resp_sensor_list_update_intervals *r = response; |
| 297 |
|
| 298 |
flags = le32_to_cpu(r->num_intervals_flags); |
| 299 |
st->num_returned = NUM_INTERVALS_RETURNED(flags); |
| 300 |
st->num_remaining = NUM_INTERVALS_REMAINING(flags); |
| 301 |
|
| 302 |
/* |
| 303 |
* Max intervals is not declared previously anywhere so we |
| 304 |
* assume it's returned+remaining on first call. |
| 305 |
*/ |
| 306 |
if (!st->max_resources) { |
| 307 |
s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags); |
| 308 |
s->intervals.count = st->num_returned + st->num_remaining; |
| 309 |
/* segmented intervals are reported in one triplet */ |
| 310 |
if (s->intervals.segmented && |
| 311 |
(st->num_remaining || st->num_returned != 3)) { |
| 312 |
dev_err(dev, |
| 313 |
"Sensor ID:%d advertises an invalid segmented interval (%d)\n", |
| 314 |
s->id, s->intervals.count); |
| 315 |
s->intervals.segmented = false; |
| 316 |
s->intervals.count = 0; |
| 317 |
return -EINVAL; |
| 318 |
} |
| 319 |
/* Direct allocation when exceeding pre-allocated */ |
| 320 |
if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) { |
| 321 |
s->intervals.desc = |
| 322 |
devm_kcalloc(dev, |
| 323 |
s->intervals.count, |
| 324 |
sizeof(*s->intervals.desc), |
| 325 |
GFP_KERNEL); |
| 326 |
if (!s->intervals.desc) { |
| 327 |
s->intervals.segmented = false; |
| 328 |
s->intervals.count = 0; |
| 329 |
return -ENOMEM; |
| 330 |
} |
| 331 |
} |
| 332 |
|
| 333 |
st->max_resources = s->intervals.count; |
| 334 |
} |
| 335 |
|
| 336 |
return 0; |
| 337 |
} |
| 338 |
|
| 339 |
static int |
| 340 |
iter_intervals_process_response(const struct scmi_protocol_handle *ph, |
| 341 |
const void *response, |
| 342 |
struct scmi_iterator_state *st, void *p) |
| 343 |
{ |
| 344 |
const struct scmi_msg_resp_sensor_list_update_intervals *r = response; |
| 345 |
struct scmi_sensor_info *s = ((struct scmi_sens_ipriv *)p)->priv; |
| 346 |
|
| 347 |
s->intervals.desc[st->desc_index + st->loop_idx] = |
| 348 |
le32_to_cpu(r->intervals[st->loop_idx]); |
| 349 |
|
| 350 |
return 0; |
| 351 |
} |
| 352 |
|
| 353 |
static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph, |
| 354 |
struct scmi_sensor_info *s) |
| 355 |
{ |
| 356 |
void *iter; |
| 357 |
struct scmi_iterator_ops ops = { |
| 358 |
.prepare_message = iter_intervals_prepare_message, |
| 359 |
.update_state = iter_intervals_update_state, |
| 360 |
.process_response = iter_intervals_process_response, |
| 361 |
}; |
| 362 |
struct scmi_sens_ipriv upriv = { |
| 363 |
.priv = s, |
| 364 |
.dev = ph->dev, |
| 365 |
}; |
| 366 |
|
| 367 |
iter = ph->hops->iter_response_init(ph, &ops, s->intervals.count, |
| 368 |
SENSOR_LIST_UPDATE_INTERVALS, |
| 369 |
sizeof(struct scmi_msg_sensor_list_update_intervals), |
| 370 |
&upriv); |
| 371 |
if (IS_ERR(iter)) |
| 372 |
return PTR_ERR(iter); |
| 373 |
|
| 374 |
return ph->hops->iter_response_run(iter); |
| 375 |
} |
| 376 |
|
| 377 |
struct scmi_apriv { |
| 378 |
bool any_axes_support_extended_names; |
| 379 |
struct scmi_sensor_info *s; |
| 380 |
}; |
| 381 |
|
| 382 |
static void iter_axes_desc_prepare_message(void *message, |
| 383 |
const unsigned int desc_index, |
| 384 |
const void *priv) |
| 385 |
{ |
| 386 |
struct scmi_msg_sensor_axis_description_get *msg = message; |
| 387 |
const struct scmi_apriv *apriv = priv; |
| 388 |
|
| 389 |
/* Set the number of sensors to be skipped/already read */ |
| 390 |
msg->id = cpu_to_le32(apriv->s->id); |
| 391 |
msg->axis_desc_index = cpu_to_le32(desc_index); |
| 392 |
} |
| 393 |
|
| 394 |
static int |
| 395 |
iter_axes_desc_update_state(struct scmi_iterator_state *st, |
| 396 |
const void *response, void *priv) |
| 397 |
{ |
| 398 |
u32 flags; |
| 399 |
const struct scmi_msg_resp_sensor_axis_description *r = response; |
| 400 |
|
| 401 |
flags = le32_to_cpu(r->num_axis_flags); |
| 402 |
st->num_returned = NUM_AXIS_RETURNED(flags); |
| 403 |
st->num_remaining = NUM_AXIS_REMAINING(flags); |
| 404 |
st->priv = (void *)&r->desc[0]; |
| 405 |
|
| 406 |
return 0; |
| 407 |
} |
| 408 |
|
| 409 |
static int |
| 410 |
iter_axes_desc_process_response(const struct scmi_protocol_handle *ph, |
| 411 |
const void *response, |
| 412 |
struct scmi_iterator_state *st, void *priv) |
| 413 |
{ |
| 414 |
u32 attrh, attrl; |
| 415 |
struct scmi_sensor_axis_info *a; |
| 416 |
size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ; |
| 417 |
struct scmi_apriv *apriv = priv; |
| 418 |
const struct scmi_axis_descriptor *adesc = st->priv; |
| 419 |
|
| 420 |
attrl = le32_to_cpu(adesc->attributes_low); |
| 421 |
if (SUPPORTS_EXTENDED_AXIS_NAMES(attrl)) |
| 422 |
apriv->any_axes_support_extended_names = true; |
| 423 |
|
| 424 |
a = &apriv->s->axis[st->desc_index + st->loop_idx]; |
| 425 |
a->id = le32_to_cpu(adesc->id); |
| 426 |
a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl); |
| 427 |
|
| 428 |
attrh = le32_to_cpu(adesc->attributes_high); |
| 429 |
a->scale = S32_EXT(SENSOR_SCALE(attrh)); |
| 430 |
a->type = SENSOR_TYPE(attrh); |
| 431 |
strscpy(a->name, adesc->name, SCMI_SHORT_NAME_MAX_SIZE); |
| 432 |
|
| 433 |
if (a->extended_attrs) { |
| 434 |
unsigned int ares = le32_to_cpu(adesc->resolution); |
| 435 |
|
| 436 |
a->resolution = SENSOR_RES(ares); |
| 437 |
a->exponent = S32_EXT(SENSOR_RES_EXP(ares)); |
| 438 |
dsize += sizeof(adesc->resolution); |
| 439 |
|
| 440 |
scmi_parse_range_attrs(&a->attrs, &adesc->attrs); |
| 441 |
dsize += sizeof(adesc->attrs); |
| 442 |
} |
| 443 |
st->priv = ((u8 *)adesc + dsize); |
| 444 |
|
| 445 |
return 0; |
| 446 |
} |
| 447 |
|
| 448 |
static int |
| 449 |
iter_axes_extended_name_update_state(struct scmi_iterator_state *st, |
| 450 |
const void *response, void *priv) |
| 451 |
{ |
| 452 |
u32 flags; |
| 453 |
const struct scmi_msg_resp_sensor_axis_names_description *r = response; |
| 454 |
|
| 455 |
flags = le32_to_cpu(r->num_axis_flags); |
| 456 |
st->num_returned = NUM_AXIS_RETURNED(flags); |
| 457 |
st->num_remaining = NUM_AXIS_REMAINING(flags); |
| 458 |
st->priv = (void *)&r->desc[0]; |
| 459 |
|
| 460 |
return 0; |
| 461 |
} |
| 462 |
|
| 463 |
static int |
| 464 |
iter_axes_extended_name_process_response(const struct scmi_protocol_handle *ph, |
| 465 |
const void *response, |
| 466 |
struct scmi_iterator_state *st, |
| 467 |
void *priv) |
| 468 |
{ |
| 469 |
struct scmi_sensor_axis_info *a; |
| 470 |
const struct scmi_apriv *apriv = priv; |
| 471 |
struct scmi_sensor_axis_name_descriptor *adesc = st->priv; |
| 472 |
u32 axis_id = le32_to_cpu(adesc->axis_id); |
| 473 |
|
| 474 |
if (axis_id >= st->max_resources) |
| 475 |
return -EPROTO; |
| 476 |
|
| 477 |
/* |
| 478 |
* Pick the corresponding descriptor based on the axis_id embedded |
| 479 |
* in the reply since the list of axes supporting extended names |
| 480 |
* can be a subset of all the axes. |
| 481 |
*/ |
| 482 |
a = &apriv->s->axis[axis_id]; |
| 483 |
strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE); |
| 484 |
st->priv = ++adesc; |
| 485 |
|
| 486 |
return 0; |
| 487 |
} |
| 488 |
|
| 489 |
static int |
| 490 |
scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph, |
| 491 |
struct scmi_sensor_info *s) |
| 492 |
{ |
| 493 |
int ret; |
| 494 |
void *iter; |
| 495 |
struct scmi_iterator_ops ops = { |
| 496 |
.prepare_message = iter_axes_desc_prepare_message, |
| 497 |
.update_state = iter_axes_extended_name_update_state, |
| 498 |
.process_response = iter_axes_extended_name_process_response, |
| 499 |
}; |
| 500 |
struct scmi_apriv apriv = { |
| 501 |
.any_axes_support_extended_names = false, |
| 502 |
.s = s, |
| 503 |
}; |
| 504 |
|
| 505 |
iter = ph->hops->iter_response_init(ph, &ops, s->num_axis, |
| 506 |
SENSOR_AXIS_NAME_GET, |
| 507 |
sizeof(struct scmi_msg_sensor_axis_description_get), |
| 508 |
&apriv); |
| 509 |
if (IS_ERR(iter)) |
| 510 |
return PTR_ERR(iter); |
| 511 |
|
| 512 |
/* |
| 513 |
* Do not cause whole protocol initialization failure when failing to |
| 514 |
* get extended names for axes. |
| 515 |
*/ |
| 516 |
ret = ph->hops->iter_response_run(iter); |
| 517 |
if (ret) |
| 518 |
dev_warn(ph->dev, |
| 519 |
"Failed to get axes extended names for %s (ret:%d).\n", |
| 520 |
s->name, ret); |
| 521 |
|
| 522 |
return 0; |
| 523 |
} |
| 524 |
|
| 525 |
static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph, |
| 526 |
struct scmi_sensor_info *s) |
| 527 |
{ |
| 528 |
int ret; |
| 529 |
void *iter; |
| 530 |
struct scmi_iterator_ops ops = { |
| 531 |
.prepare_message = iter_axes_desc_prepare_message, |
| 532 |
.update_state = iter_axes_desc_update_state, |
| 533 |
.process_response = iter_axes_desc_process_response, |
| 534 |
}; |
| 535 |
struct scmi_apriv apriv = { |
| 536 |
.any_axes_support_extended_names = false, |
| 537 |
.s = s, |
| 538 |
}; |
| 539 |
|
| 540 |
s->axis = devm_kcalloc(ph->dev, s->num_axis, |
| 541 |
sizeof(*s->axis), GFP_KERNEL); |
| 542 |
if (!s->axis) |
| 543 |
return -ENOMEM; |
| 544 |
|
| 545 |
iter = ph->hops->iter_response_init(ph, &ops, s->num_axis, |
| 546 |
SENSOR_AXIS_DESCRIPTION_GET, |
| 547 |
sizeof(struct scmi_msg_sensor_axis_description_get), |
| 548 |
&apriv); |
| 549 |
if (IS_ERR(iter)) |
| 550 |
return PTR_ERR(iter); |
| 551 |
|
| 552 |
ret = ph->hops->iter_response_run(iter); |
| 553 |
if (ret) |
| 554 |
return ret; |
| 555 |
|
| 556 |
if (PROTOCOL_REV_MAJOR(ph->version) >= 0x3 && |
| 557 |
apriv.any_axes_support_extended_names) |
| 558 |
ret = scmi_sensor_axis_extended_names_get(ph, s); |
| 559 |
|
| 560 |
return ret; |
| 561 |
} |
| 562 |
|
| 563 |
static void iter_sens_descr_prepare_message(void *message, |
| 564 |
unsigned int desc_index, |
| 565 |
const void *priv) |
| 566 |
{ |
| 567 |
struct scmi_msg_sensor_description *msg = message; |
| 568 |
|
| 569 |
msg->desc_index = cpu_to_le32(desc_index); |
| 570 |
} |
| 571 |
|
| 572 |
static int iter_sens_descr_update_state(struct scmi_iterator_state *st, |
| 573 |
const void *response, void *priv) |
| 574 |
{ |
| 575 |
const struct scmi_msg_resp_sensor_description *r = response; |
| 576 |
|
| 577 |
st->num_returned = le16_to_cpu(r->num_returned); |
| 578 |
st->num_remaining = le16_to_cpu(r->num_remaining); |
| 579 |
st->priv = (void *)&r->desc[0]; |
| 580 |
|
| 581 |
return 0; |
| 582 |
} |
| 583 |
|
| 584 |
static int |
| 585 |
iter_sens_descr_process_response(const struct scmi_protocol_handle *ph, |
| 586 |
const void *response, |
| 587 |
struct scmi_iterator_state *st, void *priv) |
| 588 |
|
| 589 |
{ |
| 590 |
int ret = 0; |
| 591 |
u32 attrh, attrl; |
| 592 |
size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ; |
| 593 |
struct scmi_sensor_info *s; |
| 594 |
struct sensors_info *si = priv; |
| 595 |
const struct scmi_sensor_descriptor *sdesc = st->priv; |
| 596 |
|
| 597 |
s = &si->sensors[st->desc_index + st->loop_idx]; |
| 598 |
s->id = le32_to_cpu(sdesc->id); |
| 599 |
|
| 600 |
attrl = le32_to_cpu(sdesc->attributes_low); |
| 601 |
/* common bitfields parsing */ |
| 602 |
s->async = SUPPORTS_ASYNC_READ(attrl); |
| 603 |
s->num_trip_points = NUM_TRIP_POINTS(attrl); |
| 604 |
/** |
| 605 |
* only SCMIv3.0 specific bitfield below. |
| 606 |
* Such bitfields are assumed to be zeroed on non |
| 607 |
* relevant fw versions...assuming fw not buggy ! |
| 608 |
*/ |
| 609 |
if (si->notify_continuos_update_cmd) |
| 610 |
s->update = SUPPORTS_UPDATE_NOTIFY(attrl); |
| 611 |
s->timestamped = SUPPORTS_TIMESTAMP(attrl); |
| 612 |
if (s->timestamped) |
| 613 |
s->tstamp_scale = S32_EXT(SENSOR_TSTAMP_EXP(attrl)); |
| 614 |
s->extended_scalar_attrs = SUPPORTS_EXTEND_ATTRS(attrl); |
| 615 |
|
| 616 |
attrh = le32_to_cpu(sdesc->attributes_high); |
| 617 |
/* common bitfields parsing */ |
| 618 |
s->scale = S32_EXT(SENSOR_SCALE(attrh)); |
| 619 |
s->type = SENSOR_TYPE(attrh); |
| 620 |
/* Use pre-allocated pool wherever possible */ |
| 621 |
s->intervals.desc = s->intervals.prealloc_pool; |
| 622 |
if (ph->version == SCMIv2_SENSOR_PROTOCOL) { |
| 623 |
s->intervals.segmented = false; |
| 624 |
s->intervals.count = 1; |
| 625 |
/* |
| 626 |
* Convert SCMIv2.0 update interval format to |
| 627 |
* SCMIv3.0 to be used as the common exposed |
| 628 |
* descriptor, accessible via common macros. |
| 629 |
*/ |
| 630 |
s->intervals.desc[0] = (SENSOR_UPDATE_BASE(attrh) << 5) | |
| 631 |
SENSOR_UPDATE_SCALE(attrh); |
| 632 |
} else { |
| 633 |
/* |
| 634 |
* From SCMIv3.0 update intervals are retrieved |
| 635 |
* via a dedicated (optional) command. |
| 636 |
* Since the command is optional, on error carry |
| 637 |
* on without any update interval. |
| 638 |
*/ |
| 639 |
if (scmi_sensor_update_intervals(ph, s)) |
| 640 |
dev_dbg(ph->dev, |
| 641 |
"Update Intervals not available for sensor ID:%d\n", |
| 642 |
s->id); |
| 643 |
} |
| 644 |
/** |
| 645 |
* only > SCMIv2.0 specific bitfield below. |
| 646 |
* Such bitfields are assumed to be zeroed on non |
| 647 |
* relevant fw versions...assuming fw not buggy ! |
| 648 |
*/ |
| 649 |
s->num_axis = min_t(unsigned int, |
| 650 |
SUPPORTS_AXIS(attrh) ? |
| 651 |
SENSOR_AXIS_NUMBER(attrh) : 0, |
| 652 |
SCMI_MAX_NUM_SENSOR_AXIS); |
| 653 |
strscpy(s->name, sdesc->name, SCMI_SHORT_NAME_MAX_SIZE); |
| 654 |
|
| 655 |
/* |
| 656 |
* If supported overwrite short name with the extended |
| 657 |
* one; on error just carry on and use already provided |
| 658 |
* short name. |
| 659 |
*/ |
| 660 |
if (PROTOCOL_REV_MAJOR(ph->version) >= 0x3 && |
| 661 |
SUPPORTS_EXTENDED_NAMES(attrl)) |
| 662 |
ph->hops->extended_name_get(ph, SENSOR_NAME_GET, s->id, |
| 663 |
NULL, s->name, SCMI_MAX_STR_SIZE); |
| 664 |
|
| 665 |
if (s->extended_scalar_attrs) { |
| 666 |
s->sensor_power = le32_to_cpu(sdesc->power); |
| 667 |
dsize += sizeof(sdesc->power); |
| 668 |
|
| 669 |
/* Only for sensors reporting scalar values */ |
| 670 |
if (s->num_axis == 0) { |
| 671 |
unsigned int sres = le32_to_cpu(sdesc->resolution); |
| 672 |
|
| 673 |
s->resolution = SENSOR_RES(sres); |
| 674 |
s->exponent = S32_EXT(SENSOR_RES_EXP(sres)); |
| 675 |
dsize += sizeof(sdesc->resolution); |
| 676 |
|
| 677 |
scmi_parse_range_attrs(&s->scalar_attrs, |
| 678 |
&sdesc->scalar_attrs); |
| 679 |
dsize += sizeof(sdesc->scalar_attrs); |
| 680 |
} |
| 681 |
} |
| 682 |
|
| 683 |
if (s->num_axis > 0) |
| 684 |
ret = scmi_sensor_axis_description(ph, s); |
| 685 |
|
| 686 |
st->priv = ((u8 *)sdesc + dsize); |
| 687 |
|
| 688 |
return ret; |
| 689 |
} |
| 690 |
|
| 691 |
static int scmi_sensor_description_get(const struct scmi_protocol_handle *ph, |
| 692 |
struct sensors_info *si) |
| 693 |
{ |
| 694 |
void *iter; |
| 695 |
struct scmi_iterator_ops ops = { |
| 696 |
.prepare_message = iter_sens_descr_prepare_message, |
| 697 |
.update_state = iter_sens_descr_update_state, |
| 698 |
.process_response = iter_sens_descr_process_response, |
| 699 |
}; |
| 700 |
|
| 701 |
iter = ph->hops->iter_response_init(ph, &ops, si->num_sensors, |
| 702 |
SENSOR_DESCRIPTION_GET, |
| 703 |
sizeof(__le32), si); |
| 704 |
if (IS_ERR(iter)) |
| 705 |
return PTR_ERR(iter); |
| 706 |
|
| 707 |
return ph->hops->iter_response_run(iter); |
| 708 |
} |
| 709 |
|
| 710 |
static inline int |
| 711 |
scmi_sensor_request_notify(const struct scmi_protocol_handle *ph, u32 sensor_id, |
| 712 |
u8 message_id, bool enable) |
| 713 |
{ |
| 714 |
int ret; |
| 715 |
u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0; |
| 716 |
struct scmi_xfer *t; |
| 717 |
struct scmi_msg_sensor_request_notify *cfg; |
| 718 |
|
| 719 |
ret = ph->xops->xfer_get_init(ph, message_id, sizeof(*cfg), 0, &t); |
| 720 |
if (ret) |
| 721 |
return ret; |
| 722 |
|
| 723 |
cfg = t->tx.buf; |
| 724 |
cfg->id = cpu_to_le32(sensor_id); |
| 725 |
cfg->event_control = cpu_to_le32(evt_cntl); |
| 726 |
|
| 727 |
ret = ph->xops->do_xfer(ph, t); |
| 728 |
|
| 729 |
ph->xops->xfer_put(ph, t); |
| 730 |
return ret; |
| 731 |
} |
| 732 |
|
| 733 |
static int scmi_sensor_trip_point_notify(const struct scmi_protocol_handle *ph, |
| 734 |
u32 sensor_id, bool enable) |
| 735 |
{ |
| 736 |
return scmi_sensor_request_notify(ph, sensor_id, |
| 737 |
SENSOR_TRIP_POINT_NOTIFY, |
| 738 |
enable); |
| 739 |
} |
| 740 |
|
| 741 |
static int |
| 742 |
scmi_sensor_continuous_update_notify(const struct scmi_protocol_handle *ph, |
| 743 |
u32 sensor_id, bool enable) |
| 744 |
{ |
| 745 |
return scmi_sensor_request_notify(ph, sensor_id, |
| 746 |
SENSOR_CONTINUOUS_UPDATE_NOTIFY, |
| 747 |
enable); |
| 748 |
} |
| 749 |
|
| 750 |
static int |
| 751 |
scmi_sensor_trip_point_config(const struct scmi_protocol_handle *ph, |
| 752 |
u32 sensor_id, u8 trip_id, u64 trip_value) |
| 753 |
{ |
| 754 |
int ret; |
| 755 |
u32 evt_cntl = SENSOR_TP_BOTH; |
| 756 |
struct scmi_xfer *t; |
| 757 |
struct scmi_msg_set_sensor_trip_point *trip; |
| 758 |
|
| 759 |
ret = ph->xops->xfer_get_init(ph, SENSOR_TRIP_POINT_CONFIG, |
| 760 |
sizeof(*trip), 0, &t); |
| 761 |
if (ret) |
| 762 |
return ret; |
| 763 |
|
| 764 |
trip = t->tx.buf; |
| 765 |
trip->id = cpu_to_le32(sensor_id); |
| 766 |
trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id)); |
| 767 |
trip->value_low = cpu_to_le32(trip_value & 0xffffffff); |
| 768 |
trip->value_high = cpu_to_le32(trip_value >> 32); |
| 769 |
|
| 770 |
ret = ph->xops->do_xfer(ph, t); |
| 771 |
|
| 772 |
ph->xops->xfer_put(ph, t); |
| 773 |
return ret; |
| 774 |
} |
| 775 |
|
| 776 |
static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph, |
| 777 |
u32 sensor_id, u32 *sensor_config) |
| 778 |
{ |
| 779 |
int ret; |
| 780 |
struct scmi_xfer *t; |
| 781 |
struct sensors_info *si = ph->get_priv(ph); |
| 782 |
|
| 783 |
if (sensor_id >= si->num_sensors) |
| 784 |
return -EINVAL; |
| 785 |
|
| 786 |
ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_GET, |
| 787 |
sizeof(__le32), sizeof(__le32), &t); |
| 788 |
if (ret) |
| 789 |
return ret; |
| 790 |
|
| 791 |
put_unaligned_le32(sensor_id, t->tx.buf); |
| 792 |
ret = ph->xops->do_xfer(ph, t); |
| 793 |
if (!ret) { |
| 794 |
struct scmi_sensor_info *s = si->sensors + sensor_id; |
| 795 |
|
| 796 |
*sensor_config = get_unaligned_le64(t->rx.buf); |
| 797 |
s->sensor_config = *sensor_config; |
| 798 |
} |
| 799 |
|
| 800 |
ph->xops->xfer_put(ph, t); |
| 801 |
return ret; |
| 802 |
} |
| 803 |
|
| 804 |
static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph, |
| 805 |
u32 sensor_id, u32 sensor_config) |
| 806 |
{ |
| 807 |
int ret; |
| 808 |
struct scmi_xfer *t; |
| 809 |
struct scmi_msg_sensor_config_set *msg; |
| 810 |
struct sensors_info *si = ph->get_priv(ph); |
| 811 |
|
| 812 |
if (sensor_id >= si->num_sensors) |
| 813 |
return -EINVAL; |
| 814 |
|
| 815 |
ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_SET, |
| 816 |
sizeof(*msg), 0, &t); |
| 817 |
if (ret) |
| 818 |
return ret; |
| 819 |
|
| 820 |
msg = t->tx.buf; |
| 821 |
msg->id = cpu_to_le32(sensor_id); |
| 822 |
msg->sensor_config = cpu_to_le32(sensor_config); |
| 823 |
|
| 824 |
ret = ph->xops->do_xfer(ph, t); |
| 825 |
if (!ret) { |
| 826 |
struct scmi_sensor_info *s = si->sensors + sensor_id; |
| 827 |
|
| 828 |
s->sensor_config = sensor_config; |
| 829 |
} |
| 830 |
|
| 831 |
ph->xops->xfer_put(ph, t); |
| 832 |
return ret; |
| 833 |
} |
| 834 |
|
| 835 |
/** |
| 836 |
* scmi_sensor_reading_get - Read scalar sensor value |
| 837 |
* @ph: Protocol handle |
| 838 |
* @sensor_id: Sensor ID |
| 839 |
* @value: The 64bit value sensor reading |
| 840 |
* |
| 841 |
* This function returns a single 64 bit reading value representing the sensor |
| 842 |
* value; if the platform SCMI Protocol implementation and the sensor support |
| 843 |
* multiple axis and timestamped-reads, this just returns the first axis while |
| 844 |
* dropping the timestamp value. |
| 845 |
* Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of |
| 846 |
* timestamped multi-axis values. |
| 847 |
* |
| 848 |
* Return: 0 on Success |
| 849 |
*/ |
| 850 |
static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph, |
| 851 |
u32 sensor_id, u64 *value) |
| 852 |
{ |
| 853 |
int ret; |
| 854 |
struct scmi_xfer *t; |
| 855 |
struct scmi_msg_sensor_reading_get *sensor; |
| 856 |
struct scmi_sensor_info *s; |
| 857 |
struct sensors_info *si = ph->get_priv(ph); |
| 858 |
|
| 859 |
if (sensor_id >= si->num_sensors) |
| 860 |
return -EINVAL; |
| 861 |
|
| 862 |
ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET, |
| 863 |
sizeof(*sensor), 0, &t); |
| 864 |
if (ret) |
| 865 |
return ret; |
| 866 |
|
| 867 |
sensor = t->tx.buf; |
| 868 |
sensor->id = cpu_to_le32(sensor_id); |
| 869 |
s = si->sensors + sensor_id; |
| 870 |
if (s->async) { |
| 871 |
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); |
| 872 |
ret = ph->xops->do_xfer_with_response(ph, t); |
| 873 |
if (!ret) { |
| 874 |
struct scmi_resp_sensor_reading_complete *resp; |
| 875 |
|
| 876 |
resp = t->rx.buf; |
| 877 |
if (le32_to_cpu(resp->id) == sensor_id) |
| 878 |
*value = |
| 879 |
get_unaligned_le64(&resp->readings_low); |
| 880 |
else |
| 881 |
ret = -EPROTO; |
| 882 |
} |
| 883 |
} else { |
| 884 |
sensor->flags = cpu_to_le32(0); |
| 885 |
ret = ph->xops->do_xfer(ph, t); |
| 886 |
if (!ret) |
| 887 |
*value = get_unaligned_le64(t->rx.buf); |
| 888 |
} |
| 889 |
|
| 890 |
ph->xops->xfer_put(ph, t); |
| 891 |
return ret; |
| 892 |
} |
| 893 |
|
| 894 |
static inline void |
| 895 |
scmi_parse_sensor_readings(struct scmi_sensor_reading *out, |
| 896 |
const struct scmi_sensor_reading_resp *in) |
| 897 |
{ |
| 898 |
out->value = get_unaligned_le64((void *)&in->sensor_value_low); |
| 899 |
out->timestamp = get_unaligned_le64((void *)&in->timestamp_low); |
| 900 |
} |
| 901 |
|
| 902 |
/** |
| 903 |
* scmi_sensor_reading_get_timestamped - Read multiple-axis timestamped values |
| 904 |
* @ph: Protocol handle |
| 905 |
* @sensor_id: Sensor ID |
| 906 |
* @count: The length of the provided @readings array |
| 907 |
* @readings: An array of elements each representing a timestamped per-axis |
| 908 |
* reading of type @struct scmi_sensor_reading. |
| 909 |
* Returned readings are ordered as the @axis descriptors array |
| 910 |
* included in @struct scmi_sensor_info and the max number of |
| 911 |
* returned elements is min(@count, @num_axis); ideally the provided |
| 912 |
* array should be of length @count equal to @num_axis. |
| 913 |
* |
| 914 |
* Return: 0 on Success |
| 915 |
*/ |
| 916 |
static int |
| 917 |
scmi_sensor_reading_get_timestamped(const struct scmi_protocol_handle *ph, |
| 918 |
u32 sensor_id, u8 count, |
| 919 |
struct scmi_sensor_reading *readings) |
| 920 |
{ |
| 921 |
int ret; |
| 922 |
struct scmi_xfer *t; |
| 923 |
struct scmi_msg_sensor_reading_get *sensor; |
| 924 |
struct scmi_sensor_info *s; |
| 925 |
struct sensors_info *si = ph->get_priv(ph); |
| 926 |
|
| 927 |
if (sensor_id >= si->num_sensors) |
| 928 |
return -EINVAL; |
| 929 |
|
| 930 |
s = si->sensors + sensor_id; |
| 931 |
if (!count || !readings || |
| 932 |
(!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis)) |
| 933 |
return -EINVAL; |
| 934 |
|
| 935 |
ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET, |
| 936 |
sizeof(*sensor), 0, &t); |
| 937 |
if (ret) |
| 938 |
return ret; |
| 939 |
|
| 940 |
sensor = t->tx.buf; |
| 941 |
sensor->id = cpu_to_le32(sensor_id); |
| 942 |
if (s->async) { |
| 943 |
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); |
| 944 |
ret = ph->xops->do_xfer_with_response(ph, t); |
| 945 |
if (!ret) { |
| 946 |
int i; |
| 947 |
struct scmi_resp_sensor_reading_complete_v3 *resp; |
| 948 |
|
| 949 |
resp = t->rx.buf; |
| 950 |
/* Retrieve only the number of requested axis anyway */ |
| 951 |
if (le32_to_cpu(resp->id) == sensor_id) |
| 952 |
for (i = 0; i < count; i++) |
| 953 |
scmi_parse_sensor_readings(&readings[i], |
| 954 |
&resp->readings[i]); |
| 955 |
else |
| 956 |
ret = -EPROTO; |
| 957 |
} |
| 958 |
} else { |
| 959 |
sensor->flags = cpu_to_le32(0); |
| 960 |
ret = ph->xops->do_xfer(ph, t); |
| 961 |
if (!ret) { |
| 962 |
int i; |
| 963 |
struct scmi_sensor_reading_resp *resp_readings; |
| 964 |
|
| 965 |
resp_readings = t->rx.buf; |
| 966 |
for (i = 0; i < count; i++) |
| 967 |
scmi_parse_sensor_readings(&readings[i], |
| 968 |
&resp_readings[i]); |
| 969 |
} |
| 970 |
} |
| 971 |
|
| 972 |
ph->xops->xfer_put(ph, t); |
| 973 |
return ret; |
| 974 |
} |
| 975 |
|
| 976 |
static const struct scmi_sensor_info * |
| 977 |
scmi_sensor_info_get(const struct scmi_protocol_handle *ph, u32 sensor_id) |
| 978 |
{ |
| 979 |
struct sensors_info *si = ph->get_priv(ph); |
| 980 |
|
| 981 |
if (sensor_id >= si->num_sensors) |
| 982 |
return NULL; |
| 983 |
|
| 984 |
return si->sensors + sensor_id; |
| 985 |
} |
| 986 |
|
| 987 |
static int scmi_sensor_count_get(const struct scmi_protocol_handle *ph) |
| 988 |
{ |
| 989 |
struct sensors_info *si = ph->get_priv(ph); |
| 990 |
|
| 991 |
return si->num_sensors; |
| 992 |
} |
| 993 |
|
| 994 |
static const struct scmi_sensor_proto_ops sensor_proto_ops = { |
| 995 |
.count_get = scmi_sensor_count_get, |
| 996 |
.info_get = scmi_sensor_info_get, |
| 997 |
.trip_point_config = scmi_sensor_trip_point_config, |
| 998 |
.reading_get = scmi_sensor_reading_get, |
| 999 |
.reading_get_timestamped = scmi_sensor_reading_get_timestamped, |
| 1000 |
.config_get = scmi_sensor_config_get, |
| 1001 |
.config_set = scmi_sensor_config_set, |
| 1002 |
}; |
| 1003 |
|
| 1004 |
static bool scmi_sensor_notify_supported(const struct scmi_protocol_handle *ph, |
| 1005 |
u8 evt_id, u32 src_id) |
| 1006 |
{ |
| 1007 |
bool supported = false; |
| 1008 |
const struct scmi_sensor_info *s; |
| 1009 |
struct sensors_info *sinfo = ph->get_priv(ph); |
| 1010 |
|
| 1011 |
s = scmi_sensor_info_get(ph, src_id); |
| 1012 |
if (!s) |
| 1013 |
return false; |
| 1014 |
|
| 1015 |
if (evt_id == SCMI_EVENT_SENSOR_TRIP_POINT_EVENT) |
| 1016 |
supported = sinfo->notify_trip_point_cmd; |
| 1017 |
else if (evt_id == SCMI_EVENT_SENSOR_UPDATE) |
| 1018 |
supported = s->update; |
| 1019 |
|
| 1020 |
return supported; |
| 1021 |
} |
| 1022 |
|
| 1023 |
static int scmi_sensor_set_notify_enabled(const struct scmi_protocol_handle *ph, |
| 1024 |
u8 evt_id, u32 src_id, bool enable) |
| 1025 |
{ |
| 1026 |
int ret; |
| 1027 |
|
| 1028 |
switch (evt_id) { |
| 1029 |
case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: |
| 1030 |
ret = scmi_sensor_trip_point_notify(ph, src_id, enable); |
| 1031 |
break; |
| 1032 |
case SCMI_EVENT_SENSOR_UPDATE: |
| 1033 |
ret = scmi_sensor_continuous_update_notify(ph, src_id, enable); |
| 1034 |
break; |
| 1035 |
default: |
| 1036 |
ret = -EINVAL; |
| 1037 |
break; |
| 1038 |
} |
| 1039 |
|
| 1040 |
if (ret) |
| 1041 |
pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n", |
| 1042 |
evt_id, src_id, ret); |
| 1043 |
|
| 1044 |
return ret; |
| 1045 |
} |
| 1046 |
|
| 1047 |
static void * |
| 1048 |
scmi_sensor_fill_custom_report(const struct scmi_protocol_handle *ph, |
| 1049 |
u8 evt_id, ktime_t timestamp, |
| 1050 |
const void *payld, size_t payld_sz, |
| 1051 |
void *report, u32 *src_id) |
| 1052 |
{ |
| 1053 |
void *rep = NULL; |
| 1054 |
|
| 1055 |
switch (evt_id) { |
| 1056 |
case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: |
| 1057 |
{ |
| 1058 |
const struct scmi_sensor_trip_notify_payld *p = payld; |
| 1059 |
struct scmi_sensor_trip_point_report *r = report; |
| 1060 |
|
| 1061 |
if (sizeof(*p) != payld_sz) |
| 1062 |
break; |
| 1063 |
|
| 1064 |
r->timestamp = timestamp; |
| 1065 |
r->agent_id = le32_to_cpu(p->agent_id); |
| 1066 |
r->sensor_id = le32_to_cpu(p->sensor_id); |
| 1067 |
r->trip_point_desc = le32_to_cpu(p->trip_point_desc); |
| 1068 |
*src_id = r->sensor_id; |
| 1069 |
rep = r; |
| 1070 |
break; |
| 1071 |
} |
| 1072 |
case SCMI_EVENT_SENSOR_UPDATE: |
| 1073 |
{ |
| 1074 |
int i; |
| 1075 |
struct scmi_sensor_info *s; |
| 1076 |
const struct scmi_sensor_update_notify_payld *p = payld; |
| 1077 |
struct scmi_sensor_update_report *r = report; |
| 1078 |
struct sensors_info *sinfo = ph->get_priv(ph); |
| 1079 |
|
| 1080 |
/* payld_sz is variable for this event */ |
| 1081 |
r->sensor_id = le32_to_cpu(p->sensor_id); |
| 1082 |
if (r->sensor_id >= sinfo->num_sensors) |
| 1083 |
break; |
| 1084 |
r->timestamp = timestamp; |
| 1085 |
r->agent_id = le32_to_cpu(p->agent_id); |
| 1086 |
s = &sinfo->sensors[r->sensor_id]; |
| 1087 |
/* |
| 1088 |
* The generated report r (@struct scmi_sensor_update_report) |
| 1089 |
* was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS |
| 1090 |
* readings: here it is filled with the effective @num_axis |
| 1091 |
* readings defined for this sensor or 1 for scalar sensors. |
| 1092 |
*/ |
| 1093 |
r->readings_count = s->num_axis ?: 1; |
| 1094 |
for (i = 0; i < r->readings_count; i++) |
| 1095 |
scmi_parse_sensor_readings(&r->readings[i], |
| 1096 |
&p->readings[i]); |
| 1097 |
*src_id = r->sensor_id; |
| 1098 |
rep = r; |
| 1099 |
break; |
| 1100 |
} |
| 1101 |
default: |
| 1102 |
break; |
| 1103 |
} |
| 1104 |
|
| 1105 |
return rep; |
| 1106 |
} |
| 1107 |
|
| 1108 |
static int scmi_sensor_get_num_sources(const struct scmi_protocol_handle *ph) |
| 1109 |
{ |
| 1110 |
struct sensors_info *si = ph->get_priv(ph); |
| 1111 |
|
| 1112 |
return si->num_sensors; |
| 1113 |
} |
| 1114 |
|
| 1115 |
static const struct scmi_event sensor_events[] = { |
| 1116 |
{ |
| 1117 |
.id = SCMI_EVENT_SENSOR_TRIP_POINT_EVENT, |
| 1118 |
.max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld), |
| 1119 |
.max_report_sz = sizeof(struct scmi_sensor_trip_point_report), |
| 1120 |
}, |
| 1121 |
{ |
| 1122 |
.id = SCMI_EVENT_SENSOR_UPDATE, |
| 1123 |
.max_payld_sz = |
| 1124 |
sizeof(struct scmi_sensor_update_notify_payld) + |
| 1125 |
SCMI_MAX_NUM_SENSOR_AXIS * |
| 1126 |
sizeof(struct scmi_sensor_reading_resp), |
| 1127 |
.max_report_sz = sizeof(struct scmi_sensor_update_report) + |
| 1128 |
SCMI_MAX_NUM_SENSOR_AXIS * |
| 1129 |
sizeof(struct scmi_sensor_reading), |
| 1130 |
}, |
| 1131 |
}; |
| 1132 |
|
| 1133 |
static const struct scmi_event_ops sensor_event_ops = { |
| 1134 |
.is_notify_supported = scmi_sensor_notify_supported, |
| 1135 |
.get_num_sources = scmi_sensor_get_num_sources, |
| 1136 |
.set_notify_enabled = scmi_sensor_set_notify_enabled, |
| 1137 |
.fill_custom_report = scmi_sensor_fill_custom_report, |
| 1138 |
}; |
| 1139 |
|
| 1140 |
static const struct scmi_protocol_events sensor_protocol_events = { |
| 1141 |
.queue_sz = SCMI_PROTO_QUEUE_SZ, |
| 1142 |
.ops = &sensor_event_ops, |
| 1143 |
.evts = sensor_events, |
| 1144 |
.num_events = ARRAY_SIZE(sensor_events), |
| 1145 |
}; |
| 1146 |
|
| 1147 |
static int scmi_sensors_protocol_init(const struct scmi_protocol_handle *ph) |
| 1148 |
{ |
| 1149 |
int ret; |
| 1150 |
struct sensors_info *sinfo; |
| 1151 |
|
| 1152 |
dev_dbg(ph->dev, "Sensor Version %d.%d\n", |
| 1153 |
PROTOCOL_REV_MAJOR(ph->version), PROTOCOL_REV_MINOR(ph->version)); |
| 1154 |
|
| 1155 |
sinfo = devm_kzalloc(ph->dev, sizeof(*sinfo), GFP_KERNEL); |
| 1156 |
if (!sinfo) |
| 1157 |
return -ENOMEM; |
| 1158 |
|
| 1159 |
ret = scmi_sensor_attributes_get(ph, sinfo); |
| 1160 |
if (ret) |
| 1161 |
return ret; |
| 1162 |
sinfo->sensors = devm_kcalloc(ph->dev, sinfo->num_sensors, |
| 1163 |
sizeof(*sinfo->sensors), GFP_KERNEL); |
| 1164 |
if (!sinfo->sensors) |
| 1165 |
return -ENOMEM; |
| 1166 |
|
| 1167 |
ret = scmi_sensor_description_get(ph, sinfo); |
| 1168 |
if (ret) |
| 1169 |
return ret; |
| 1170 |
|
| 1171 |
return ph->set_priv(ph, sinfo); |
| 1172 |
} |
| 1173 |
|
| 1174 |
static const struct scmi_protocol scmi_sensors = { |
| 1175 |
.id = SCMI_PROTOCOL_SENSOR, |
| 1176 |
.owner = THIS_MODULE, |
| 1177 |
.instance_init = &scmi_sensors_protocol_init, |
| 1178 |
.ops = &sensor_proto_ops, |
| 1179 |
.events = &sensor_protocol_events, |
| 1180 |
.supported_version = SCMI_PROTOCOL_SUPPORTED_VERSION, |
| 1181 |
}; |
| 1182 |
|
| 1183 |
DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(sensors, scmi_sensors) |